| /****************************************************************************** |
| * |
| * Copyright 2003-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains compile-time configurable constants for the device |
| * manager. |
| * |
| ******************************************************************************/ |
| |
| #include <stddef.h> |
| |
| #include "bt_target.h" |
| #include "bta_api.h" |
| #include "bta_dm_int.h" |
| #include "bta_hh_api.h" |
| #include "bta_jv_api.h" |
| #include "bta_sys.h" |
| |
| #ifndef BTA_DM_LINK_POLICY_SETTINGS |
| #define BTA_DM_LINK_POLICY_SETTINGS \ |
| (HCI_ENABLE_MASTER_SLAVE_SWITCH | HCI_ENABLE_HOLD_MODE | \ |
| HCI_ENABLE_SNIFF_MODE | HCI_ENABLE_PARK_MODE) |
| #endif |
| |
| /* page timeout in 625uS */ |
| #ifndef BTA_DM_PAGE_TIMEOUT |
| #define BTA_DM_PAGE_TIMEOUT 8192 |
| #endif |
| |
| /* link supervision timeout in 625uS (5 secs) */ |
| #ifndef BTA_DM_LINK_TIMEOUT |
| #define BTA_DM_LINK_TIMEOUT 8000 |
| #endif |
| |
| /* TRUE to avoid scatternet when av is streaming (be the master) */ |
| #ifndef BTA_DM_AVOID_SCATTER_A2DP |
| #define BTA_DM_AVOID_SCATTER_A2DP TRUE |
| #endif |
| |
| /* For Insight, PM cfg lookup tables are runtime configurable (to allow tweaking |
| * of params for power consumption measurements) */ |
| #ifndef BTE_SIM_APP |
| #define tBTA_DM_PM_TYPE_QUALIFIER const |
| #else |
| #define tBTA_DM_PM_TYPE_QUALIFIER |
| #endif |
| |
| const tBTA_DM_CFG bta_dm_cfg = { |
| /* mobile phone COD */ |
| BTA_DM_COD, |
| /* link policy settings */ |
| BTA_DM_LINK_POLICY_SETTINGS, |
| /* page timeout in 625uS */ |
| BTA_DM_PAGE_TIMEOUT, |
| /* link supervision timeout in 625uS*/ |
| BTA_DM_LINK_TIMEOUT, |
| /* true to avoid scatternet when av is streaming (be the master) */ |
| BTA_DM_AVOID_SCATTER_A2DP}; |
| |
| #ifndef BTA_DM_SCATTERNET |
| /* By default, allow partial scatternet */ |
| #define BTA_DM_SCATTERNET BTA_DM_PARTIAL_SCATTERNET |
| #endif |
| |
| #ifndef BTA_HH_ROLE |
| /* By default, do not specify HH role (backward compatibility) */ |
| #define BTA_HH_ROLE BTA_ANY_ROLE |
| #endif |
| |
| #ifndef BTA_AV_ROLE |
| /* By default, AV role (backward BTA_MASTER_ROLE_PREF) */ |
| #define BTA_AV_ROLE BTA_MASTER_ROLE_PREF |
| #endif |
| |
| #ifndef BTA_PANU_ROLE |
| /* By default, AV role (backward BTA_MASTER_ROLE_PREF) */ |
| #define BTA_PANU_ROLE BTA_SLAVE_ROLE_ONLY |
| #endif |
| #define BTA_DM_NUM_RM_ENTRY 6 |
| |
| /* appids for PAN used by insight sample application |
| these have to be same as defined in btui_int.h */ |
| #define BTUI_PAN_ID_PANU 0 |
| #define BTUI_PAN_ID_NAP 1 |
| #define BTUI_PAN_ID_GN 2 |
| |
| /* First element is always for SYS: |
| app_id = # of entries table, cfg is |
| device scatternet support */ |
| const tBTA_DM_RM bta_dm_rm_cfg[] = { |
| {BTA_ID_SYS, BTA_DM_NUM_RM_ENTRY, BTA_DM_SCATTERNET}, |
| {BTA_ID_PAN, BTUI_PAN_ID_NAP, BTA_ANY_ROLE}, |
| {BTA_ID_PAN, BTUI_PAN_ID_GN, BTA_ANY_ROLE}, |
| {BTA_ID_PAN, BTA_APP_ID_PAN_MULTI, BTA_MASTER_ROLE_ONLY}, |
| {BTA_ID_PAN, BTUI_PAN_ID_PANU, BTA_PANU_ROLE}, |
| {BTA_ID_HH, BTA_ALL_APP_ID, BTA_HH_ROLE}, |
| {BTA_ID_AV, BTA_ALL_APP_ID, BTA_AV_ROLE}}; |
| |
| const tBTA_DM_CFG* p_bta_dm_cfg = &bta_dm_cfg; |
| |
| const tBTA_DM_RM* p_bta_dm_rm_cfg = &bta_dm_rm_cfg[0]; |
| |
| #define BTA_DM_NUM_PM_ENTRY \ |
| 25 /* number of entries in bta_dm_pm_cfg except the first */ |
| #define BTA_DM_NUM_PM_SPEC 16 /* number of entries in bta_dm_pm_spec */ |
| |
| tBTA_DM_PM_TYPE_QUALIFIER tBTA_DM_PM_CFG |
| bta_dm_pm_cfg[BTA_DM_NUM_PM_ENTRY + 1] = { |
| {BTA_ID_SYS, BTA_DM_NUM_PM_ENTRY, |
| 0}, /* reserved: specifies length of this table. */ |
| {BTA_ID_AG, BTA_ALL_APP_ID, |
| 0}, /* ag uses first spec table for app id 0 */ |
| {BTA_ID_CT, 1, 1}, /* ct (BTA_ID_CT,APP ID=1) spec table */ |
| {BTA_ID_CG, BTA_ALL_APP_ID, 1}, /* cg resue ct spec table */ |
| {BTA_ID_DG, BTA_ALL_APP_ID, 2}, /* dg spec table */ |
| {BTA_ID_AV, BTA_ALL_APP_ID, 4}, /* av spec table */ |
| {BTA_ID_AVK, BTA_ALL_APP_ID, 12}, /* avk spec table */ |
| {BTA_ID_FTC, BTA_ALL_APP_ID, 6}, /* ftc spec table */ |
| {BTA_ID_FTS, BTA_ALL_APP_ID, 7}, /* fts spec table */ |
| {BTA_ID_HD, BTA_ALL_APP_ID, 3}, /* hd spec table */ |
| {BTA_ID_HH, BTA_HH_APP_ID_JOY, 5}, /* app BTA_HH_APP_ID_JOY, |
| similar to hh spec table */ |
| {BTA_ID_HH, BTA_HH_APP_ID_GPAD, 5}, /* app BTA_HH_APP_ID_GPAD, |
| similar to hh spec table */ |
| {BTA_ID_HH, BTA_ALL_APP_ID, 6}, /* hh spec table */ |
| {BTA_ID_PBC, BTA_ALL_APP_ID, 2}, /* reuse dg spec table */ |
| {BTA_ID_PBS, BTA_ALL_APP_ID, 7}, /* reuse fts spec table */ |
| {BTA_ID_OPC, BTA_ALL_APP_ID, 6}, /* reuse ftc spec table */ |
| {BTA_ID_OPS, BTA_ALL_APP_ID, 7}, /* reuse fts spec table */ |
| {BTA_ID_MSE, BTA_ALL_APP_ID, 7}, /* reuse fts spec table */ |
| {BTA_ID_JV, BTA_JV_PM_ID_1, |
| 6}, /* app BTA_JV_PM_ID_1, reuse ftc spec table */ |
| {BTA_ID_JV, BTA_ALL_APP_ID, 7}, /* reuse fts spec table */ |
| {BTA_ID_HL, BTA_ALL_APP_ID, 8}, /* reuse fts spec table */ |
| {BTA_ID_PAN, BTUI_PAN_ID_PANU, 9}, /* PANU spec table */ |
| {BTA_ID_PAN, BTUI_PAN_ID_NAP, 10}, /* NAP spec table */ |
| {BTA_ID_HS, BTA_ALL_APP_ID, 11}, /* HS spec table */ |
| {BTA_ID_GATTC, BTA_ALL_APP_ID, 13}, /* gattc spec table */ |
| {BTA_ID_GATTS, BTA_ALL_APP_ID, 14} /* gatts spec table */ |
| }; |
| |
| tBTA_DM_PM_TYPE_QUALIFIER tBTA_DM_PM_SPEC bta_dm_pm_spec[BTA_DM_NUM_PM_SPEC] = { |
| /* AG : 0 */ |
| {(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_SNIFF_SCO_OPEN_IDX, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco open, active */ |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco close sniff */ |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 7000}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_RETRY, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* CT, CG : 1 */ |
| {(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_PARK, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open park */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco open sniff */ |
| {{BTA_DM_PM_PARK, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco close park */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_RETRY, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* DG, PBC : 2 */ |
| {(BTA_DM_PM_ACTIVE), /* no power saving mode allowed */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_SNIFF, 1000}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* HD : 3 */ |
| {(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR3), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF_HD_ACTIVE_IDX, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_SNIFF_HD_IDLE_IDX, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_SNIFF_HD_ACTIVE_IDX, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* AV : 4 */ |
| {(BTA_DM_PM_SNIFF), /* allow sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR0), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* HH for joysticks and gamepad : 5 */ |
| {(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR1), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF6, BTA_DM_PM_HH_OPEN_DELAY}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco close, used for HH suspend */ |
| {{BTA_DM_PM_SNIFF6, BTA_DM_PM_HH_IDLE_DELAY}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_SNIFF6, BTA_DM_PM_HH_ACTIVE_DELAY}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* HH : 6 */ |
| {(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR1), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF_HH_OPEN_IDX, BTA_DM_PM_HH_OPEN_DELAY}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco close, used for HH suspend */ |
| {{BTA_DM_PM_SNIFF_HH_IDLE_IDX, BTA_DM_PM_HH_IDLE_DELAY}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_SNIFF_HH_ACTIVE_IDX, BTA_DM_PM_HH_ACTIVE_DELAY}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* FTC, OPC, JV : 7 */ |
| {(BTA_DM_PM_SNIFF), /* allow sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_ACTIVE, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, BTA_FTC_IDLE_TO_SNIFF_DELAY_MS}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* FTS, PBS, OPS, MSE, BTA_JV_PM_ID_1 : 8 */ |
| {(BTA_DM_PM_SNIFF), /* allow sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_ACTIVE, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* HL : 9 */ |
| {(BTA_DM_PM_SNIFF), /* allow sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco open, active */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco close sniff */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* PANU : 10 */ |
| {(BTA_DM_PM_SNIFF), /* allow sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_ACTIVE, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* NAP : 11 */ |
| {(BTA_DM_PM_SNIFF), /* allow sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_ACTIVE, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* HS : 12 */ |
| {(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_SNIFF3, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco open, active */ |
| {{BTA_DM_PM_SNIFF, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* sco close sniff */ |
| {{BTA_DM_PM_SNIFF, 7000}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_RETRY, 7000}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }}, |
| |
| /* AVK : 13 */ |
| {(BTA_DM_PM_SNIFF), /* allow sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF, 3000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open sniff */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_SNIFF4, 3000}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_NO_ACTION, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }} |
| |
| /* GATTC : 14 */ |
| , |
| {(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 10000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_ACTION, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_SNIFF_A2DP_IDX, 10000}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_ACTIVE, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_RETRY, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }} |
| /* GATTS : 15 */ |
| , |
| {(BTA_DM_PM_SNIFF | BTA_DM_PM_PARK), /* allow park & sniff */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| (BTA_DM_PM_SSR2), /* the SSR entry */ |
| #endif |
| { |
| {{BTA_DM_PM_NO_PREF, 0}, |
| {BTA_DM_PM_NO_ACTION, 0}}, /* conn open active */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* conn close */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app open */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* app close */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco open */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* sco close */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* idle */ |
| {{BTA_DM_PM_NO_PREF, 0}, {BTA_DM_PM_NO_ACTION, 0}}, /* busy */ |
| {{BTA_DM_PM_RETRY, 5000}, |
| {BTA_DM_PM_NO_ACTION, 0}} /* mode change retry */ |
| }} |
| |
| #ifdef BTE_SIM_APP /* For Insight builds only */ |
| /* Entries at the end of the pm_spec table are user-defined (runtime |
| configurable), |
| for power consumption experiments. |
| Insight finds the first user-defined entry by looking for the first |
| BTA_DM_PM_NO_PREF. |
| The number of user_defined specs is defined by |
| BTA_SWRAP_UD_PM_SPEC_COUNT */ |
| , |
| {BTA_DM_PM_NO_PREF}, /* pm_spec USER_DEFINED_0 */ |
| {BTA_DM_PM_NO_PREF} /* pm_spec USER_DEFINED_1 */ |
| #endif /* BTE_SIM_APP */ |
| }; |
| |
| /* Please refer to the SNIFF table definitions in bta_api.h. |
| * |
| * Adding to or Modifying the Table |
| * Additional sniff parameter entries can be added for BTA_DM_PM_SNIFF6 - |
| * BTA_DM_PM_SNIFF7. |
| * Overrides of additional table entries can be specified in bdroid_buildcfg.h. |
| * If additional |
| * sniff parameter entries are added or an override of an existing entry is |
| * specified in |
| * bdroid_buildcfg.h then the BTA_DM_PM_*_IDX defines in bta_api.h will need to |
| * be match the new |
| * ordering. |
| * |
| * Table Ordering |
| * Sniff Table entries must be ordered from highest latency (biggest interval) |
| * to lowest latency. |
| * If there is a conflict among the connected services the setting with the |
| * lowest latency will |
| * be selected. |
| */ |
| tBTA_DM_PM_TYPE_QUALIFIER tBTM_PM_PWR_MD bta_dm_pm_md[] = { |
| /* |
| * More sniff parameter entries can be added for |
| * BTA_DM_PM_SNIFF3 - BTA_DM_PM_SNIFF7, if needed. When entries are added or |
| * removed, BTA_DM_PM_PARK_IDX needs to be updated to reflect the actual |
| * index |
| * BTA_DM_PM_PARK_IDX is defined in bta_api.h and can be override by the |
| * bdroid_buildcfg.h settings. |
| * The SNIFF table entries must be in the order from highest latency |
| * (biggest |
| * interval) to lowest latency. If there's a conflict among the connected |
| * services, the setting with lowest latency wins. |
| */ |
| /* sniff modes: max interval, min interval, attempt, timeout */ |
| {BTA_DM_PM_SNIFF_MAX, BTA_DM_PM_SNIFF_MIN, BTA_DM_PM_SNIFF_ATTEMPT, |
| BTA_DM_PM_SNIFF_TIMEOUT, BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF - A2DP */ |
| {BTA_DM_PM_SNIFF1_MAX, BTA_DM_PM_SNIFF1_MIN, BTA_DM_PM_SNIFF1_ATTEMPT, |
| BTA_DM_PM_SNIFF1_TIMEOUT, BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF1 */ |
| {BTA_DM_PM_SNIFF2_MAX, BTA_DM_PM_SNIFF2_MIN, BTA_DM_PM_SNIFF2_ATTEMPT, |
| BTA_DM_PM_SNIFF2_TIMEOUT, |
| BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF2- HD idle */ |
| {BTA_DM_PM_SNIFF3_MAX, BTA_DM_PM_SNIFF3_MIN, BTA_DM_PM_SNIFF3_ATTEMPT, |
| BTA_DM_PM_SNIFF3_TIMEOUT, |
| BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF3- SCO open */ |
| {BTA_DM_PM_SNIFF4_MAX, BTA_DM_PM_SNIFF4_MIN, BTA_DM_PM_SNIFF4_ATTEMPT, |
| BTA_DM_PM_SNIFF4_TIMEOUT, |
| BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF4- HD active */ |
| {BTA_DM_PM_SNIFF5_MAX, BTA_DM_PM_SNIFF5_MIN, BTA_DM_PM_SNIFF5_ATTEMPT, |
| BTA_DM_PM_SNIFF5_TIMEOUT, |
| BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF5- HD active */ |
| {BTA_DM_PM_SNIFF6_MAX, BTA_DM_PM_SNIFF6_MIN, BTA_DM_PM_SNIFF6_ATTEMPT, |
| BTA_DM_PM_SNIFF6_TIMEOUT, |
| BTM_PM_MD_SNIFF}, /* for BTA_DM_PM_SNIFF6- HD active */ |
| {BTA_DM_PM_PARK_MAX, BTA_DM_PM_PARK_MIN, BTA_DM_PM_PARK_ATTEMPT, |
| BTA_DM_PM_PARK_TIMEOUT, BTM_PM_MD_PARK} |
| |
| #ifdef BTE_SIM_APP /* For Insight builds only */ |
| /* Entries at the end of the bta_dm_pm_md table are user-defined (runtime |
| configurable), |
| for power consumption experiments. |
| Insight finds the first user-defined entry by looking for the first |
| 'max=0'. |
| The number of user_defined specs is defined by BTA_SWRAP_UD_PM_DM_COUNT |
| */ |
| , |
| {0}, /* CONN_OPEN/SCO_CLOSE power mode settings for pm_spec USER_DEFINED_0 |
| */ |
| {0}, /* SCO_OPEN power mode settings for pm_spec USER_DEFINED_0 */ |
| |
| {0}, /* CONN_OPEN/SCO_CLOSE power mode settings for pm_spec USER_DEFINED_1 |
| */ |
| {0} /* SCO_OPEN power mode settings for pm_spec USER_DEFINED_1 */ |
| #endif /* BTE_SIM_APP */ |
| }; |
| |
| /* 0=max_lat -> no SSR */ |
| /* the smaller of the SSR max latency wins. |
| * the entries in this table must be from highest latency (biggest interval) to |
| * lowest latency */ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| tBTA_DM_SSR_SPEC bta_dm_ssr_spec[] = { |
| /*max_lat, min_rmt_to, min_loc_to*/ |
| {0, 0, 0}, /* BTA_DM_PM_SSR0 - do not use SSR */ |
| /* BTA_DM_PM_SSR1 - HH, can NOT share entry with any other profile, seting |
| default max latency and min remote timeout as 0, and always read |
| individual device preference from HH module */ |
| {0, 0, 2}, |
| {1200, 2, 2}, /* BTA_DM_PM_SSR2 - others (as long as sniff is allowed)*/ |
| {360, 160, 1600} /* BTA_DM_PM_SSR3 - HD */ |
| }; |
| |
| tBTA_DM_SSR_SPEC* p_bta_dm_ssr_spec = &bta_dm_ssr_spec[0]; |
| #endif |
| |
| const tBTA_DM_PM_CFG* p_bta_dm_pm_cfg = &bta_dm_pm_cfg[0]; |
| const tBTA_DM_PM_SPEC* p_bta_dm_pm_spec = &bta_dm_pm_spec[0]; |
| const tBTM_PM_PWR_MD* p_bta_dm_pm_md = &bta_dm_pm_md[0]; |
| |
| /* The performance impact of EIR packet size |
| * |
| * When BTM_EIR_DEFAULT_FEC_REQUIRED is true, |
| * 1 to 17 bytes, DM1 is used and most robust. |
| * 18 to 121 bytes, DM3 is used but impacts inquiry scan time with large number |
| * of devices.(almost double with 150 users) |
| * 122 to 224 bytes, DM5 is used but cause quite big performance loss even with |
| * small number of users. so it is not recommended. |
| * 225 to 240 bytes, DH5 is used without FEC but it not recommended. |
| * (same reason of DM5) |
| * |
| * When BTM_EIR_DEFAULT_FEC_REQUIRED is false, |
| * 1 to 27 bytes, DH1 is used but only robust at short range. |
| * 28 to 183 bytes, DH3 is used but only robust at short range and impacts |
| * inquiry |
| * scan time with large number of devices. |
| * 184 to 240 bytes, DH5 is used but it not recommended. |
| */ |
| |
| #if (BTA_EIR_CANNED_UUID_LIST == TRUE) |
| /* for example */ |
| const uint8_t bta_dm_eir_uuid16_list[] = { |
| 0x08, 0x11, /* Headset */ |
| 0x1E, 0x11, /* Handsfree */ |
| 0x0E, 0x11, /* AV Remote Control */ |
| 0x0B, 0x11, /* Audio Sink */ |
| }; |
| #endif // BTA_EIR_CANNED_UUID_LIST |
| |
| /* Extended Inquiry Response */ |
| const tBTA_DM_EIR_CONF bta_dm_eir_cfg = { |
| 50, /* minimum length of local name when it is shortened */ |
| /* if length of local name is longer than this and EIR has not enough */ |
| /* room for all UUID list then local name is shortened to this length */ |
| #if (BTA_EIR_CANNED_UUID_LIST == TRUE) |
| 8, (uint8_t*)bta_dm_eir_uuid16_list, |
| #else // BTA_EIR_CANNED_UUID_LIST |
| { |
| /* mask of UUID list in EIR */ |
| 0xFFFFFFFF, /* LSB is the first UUID of the first 32 UUIDs in |
| BTM_EIR_UUID_LKUP_TBL */ |
| 0xFFFFFFFF /* LSB is the first UUID of the next 32 UUIDs in |
| BTM_EIR_UUID_LKUP_TBL */ |
| /* BTM_EIR_UUID_LKUP_TBL can be overrided */ |
| }, |
| #endif // BTA_EIR_CANNED_UUID_LIST |
| NULL, /* Inquiry TX power */ |
| 0, /* length of flags in bytes */ |
| NULL, /* flags for EIR */ |
| 0, /* length of manufacturer specific in bytes */ |
| NULL, /* manufacturer specific */ |
| 0, /* length of additional data in bytes */ |
| NULL /* additional data */ |
| }; |
| const tBTA_DM_EIR_CONF* p_bta_dm_eir_cfg = &bta_dm_eir_cfg; |