| /* |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_INCLUDE_BT_GATT_CLIENT_H |
| #define ANDROID_INCLUDE_BT_GATT_CLIENT_H |
| |
| #include <stdint.h> |
| #include <vector> |
| #include "bt_common_types.h" |
| #include "bt_gatt_types.h" |
| |
| #include <bluetooth/uuid.h> |
| |
| __BEGIN_DECLS |
| |
| /** |
| * Buffer sizes for maximum attribute length and maximum read/write |
| * operation buffer size. |
| */ |
| #define BTGATT_MAX_ATTR_LEN 600 |
| |
| /** Buffer type for unformatted reads/writes */ |
| typedef struct { |
| uint8_t value[BTGATT_MAX_ATTR_LEN]; |
| uint16_t len; |
| } btgatt_unformatted_value_t; |
| |
| /** Parameters for GATT read operations */ |
| typedef struct { |
| uint16_t handle; |
| btgatt_unformatted_value_t value; |
| uint16_t value_type; |
| uint8_t status; |
| } btgatt_read_params_t; |
| |
| /** Parameters for GATT write operations */ |
| typedef struct { |
| btgatt_srvc_id_t srvc_id; |
| btgatt_gatt_id_t char_id; |
| btgatt_gatt_id_t descr_id; |
| uint8_t status; |
| } btgatt_write_params_t; |
| |
| /** Attribute change notification parameters */ |
| typedef struct { |
| uint8_t value[BTGATT_MAX_ATTR_LEN]; |
| RawAddress bda; |
| uint16_t handle; |
| uint16_t len; |
| uint8_t is_notify; |
| } btgatt_notify_params_t; |
| |
| typedef struct { |
| RawAddress* bda1; |
| bluetooth::Uuid* uuid1; |
| uint16_t u1; |
| uint16_t u2; |
| uint16_t u3; |
| uint16_t u4; |
| uint16_t u5; |
| } btgatt_test_params_t; |
| |
| /* BT GATT client error codes */ |
| typedef enum { |
| BT_GATTC_COMMAND_SUCCESS = 0, /* 0 Command succeeded */ |
| BT_GATTC_COMMAND_STARTED, /* 1 Command started OK. */ |
| BT_GATTC_COMMAND_BUSY, /* 2 Device busy with another command */ |
| BT_GATTC_COMMAND_STORED, /* 3 request is stored in control block */ |
| BT_GATTC_NO_RESOURCES, /* 4 No resources to issue command */ |
| BT_GATTC_MODE_UNSUPPORTED, /* 5 Request for 1 or more unsupported modes */ |
| BT_GATTC_ILLEGAL_VALUE, /* 6 Illegal command /parameter value */ |
| BT_GATTC_INCORRECT_STATE, /* 7 Device in wrong state for request */ |
| BT_GATTC_UNKNOWN_ADDR, /* 8 Unknown remote BD address */ |
| BT_GATTC_DEVICE_TIMEOUT, /* 9 Device timeout */ |
| BT_GATTC_INVALID_CONTROLLER_OUTPUT, /* 10 An incorrect value was received |
| from HCI */ |
| BT_GATTC_SECURITY_ERROR, /* 11 Authorization or security failure or not |
| authorized */ |
| BT_GATTC_DELAYED_ENCRYPTION_CHECK, /*12 Delayed encryption check */ |
| BT_GATTC_ERR_PROCESSING /* 12 Generic error */ |
| } btgattc_error_t; |
| |
| /** BT-GATT Client callback structure. */ |
| |
| /** Callback invoked in response to register_client */ |
| typedef void (*register_client_callback)(int status, int client_if, |
| const bluetooth::Uuid& app_uuid); |
| |
| /** GATT open callback invoked in response to open */ |
| typedef void (*connect_callback)(int conn_id, int status, int client_if, |
| const RawAddress& bda); |
| |
| /** Callback invoked in response to close */ |
| typedef void (*disconnect_callback)(int conn_id, int status, int client_if, |
| const RawAddress& bda); |
| |
| /** |
| * Invoked in response to search_service when the GATT service search |
| * has been completed. |
| */ |
| typedef void (*search_complete_callback)(int conn_id, int status); |
| |
| /** Callback invoked in response to [de]register_for_notification */ |
| typedef void (*register_for_notification_callback)(int conn_id, int registered, |
| int status, uint16_t handle); |
| |
| /** |
| * Remote device notification callback, invoked when a remote device sends |
| * a notification or indication that a client has registered for. |
| */ |
| typedef void (*notify_callback)(int conn_id, |
| const btgatt_notify_params_t& p_data); |
| |
| /** Reports result of a GATT read operation */ |
| typedef void (*read_characteristic_callback)(int conn_id, int status, |
| btgatt_read_params_t* p_data); |
| |
| /** GATT write characteristic operation callback */ |
| typedef void (*write_characteristic_callback)(int conn_id, int status, |
| uint16_t handle); |
| |
| /** GATT execute prepared write callback */ |
| typedef void (*execute_write_callback)(int conn_id, int status); |
| |
| /** Callback invoked in response to read_descriptor */ |
| typedef void (*read_descriptor_callback)(int conn_id, int status, |
| const btgatt_read_params_t& p_data); |
| |
| /** Callback invoked in response to write_descriptor */ |
| typedef void (*write_descriptor_callback)(int conn_id, int status, |
| uint16_t handle); |
| |
| /** Callback triggered in response to read_remote_rssi */ |
| typedef void (*read_remote_rssi_callback)(int client_if, const RawAddress& bda, |
| int rssi, int status); |
| |
| /** Callback invoked when the MTU for a given connection changes */ |
| typedef void (*configure_mtu_callback)(int conn_id, int status, int mtu); |
| |
| /** |
| * Callback notifying an application that a remote device connection is |
| * currently congested and cannot receive any more data. An application should |
| * avoid sending more data until a further callback is received indicating the |
| * congestion status has been cleared. |
| */ |
| typedef void (*congestion_callback)(int conn_id, bool congested); |
| |
| /** GATT get database callback */ |
| typedef void (*get_gatt_db_callback)(int conn_id, const btgatt_db_element_t* db, |
| int count); |
| |
| /** GATT services between start_handle and end_handle were removed */ |
| typedef void (*services_removed_callback)(int conn_id, uint16_t start_handle, |
| uint16_t end_handle); |
| |
| /** GATT services were added */ |
| typedef void (*services_added_callback)(int conn_id, |
| const btgatt_db_element_t& added, |
| int added_count); |
| |
| /** Callback invoked when the PHY for a given connection changes */ |
| typedef void (*phy_updated_callback)(int conn_id, uint8_t tx_phy, |
| uint8_t rx_phy, uint8_t status); |
| |
| /** Callback invoked when the connection parameters for a given connection |
| * changes */ |
| typedef void (*conn_updated_callback)(int conn_id, uint16_t interval, |
| uint16_t latency, uint16_t timeout, |
| uint8_t status); |
| |
| typedef struct { |
| register_client_callback register_client_cb; |
| connect_callback open_cb; |
| disconnect_callback close_cb; |
| search_complete_callback search_complete_cb; |
| register_for_notification_callback register_for_notification_cb; |
| notify_callback notify_cb; |
| read_characteristic_callback read_characteristic_cb; |
| write_characteristic_callback write_characteristic_cb; |
| read_descriptor_callback read_descriptor_cb; |
| write_descriptor_callback write_descriptor_cb; |
| execute_write_callback execute_write_cb; |
| read_remote_rssi_callback read_remote_rssi_cb; |
| configure_mtu_callback configure_mtu_cb; |
| congestion_callback congestion_cb; |
| get_gatt_db_callback get_gatt_db_cb; |
| services_removed_callback services_removed_cb; |
| services_added_callback services_added_cb; |
| phy_updated_callback phy_updated_cb; |
| conn_updated_callback conn_updated_cb; |
| } btgatt_client_callbacks_t; |
| |
| /** Represents the standard BT-GATT client interface. */ |
| |
| typedef struct { |
| /** Registers a GATT client application with the stack */ |
| bt_status_t (*register_client)(const bluetooth::Uuid& uuid); |
| |
| /** Unregister a client application from the stack */ |
| bt_status_t (*unregister_client)(int client_if); |
| |
| /** Create a connection to a remote LE or dual-mode device */ |
| bt_status_t (*connect)(int client_if, const RawAddress& bd_addr, |
| bool is_direct, int transport, bool opportunistic, |
| int initiating_phys); |
| |
| /** Disconnect a remote device or cancel a pending connection */ |
| bt_status_t (*disconnect)(int client_if, const RawAddress& bd_addr, |
| int conn_id); |
| |
| /** Clear the attribute cache for a given device */ |
| bt_status_t (*refresh)(int client_if, const RawAddress& bd_addr); |
| |
| /** |
| * Enumerate all GATT services on a connected device. |
| * Optionally, the results can be filtered for a given UUID. |
| */ |
| bt_status_t (*search_service)(int conn_id, |
| const bluetooth::Uuid* filter_uuid); |
| |
| /** |
| * Sead "Find service by UUID" request. Used only for PTS tests. |
| */ |
| void (*btif_gattc_discover_service_by_uuid)(int conn_id, |
| const bluetooth::Uuid& uuid); |
| |
| /** Read a characteristic on a remote device */ |
| bt_status_t (*read_characteristic)(int conn_id, uint16_t handle, |
| int auth_req); |
| |
| /** Read a characteristic on a remote device */ |
| bt_status_t (*read_using_characteristic_uuid)(int conn_id, |
| const bluetooth::Uuid& uuid, |
| uint16_t s_handle, |
| uint16_t e_handle, |
| int auth_req); |
| |
| /** Write a remote characteristic */ |
| bt_status_t (*write_characteristic)(int conn_id, uint16_t handle, |
| int write_type, int auth_req, |
| std::vector<uint8_t> value); |
| |
| /** Read the descriptor for a given characteristic */ |
| bt_status_t (*read_descriptor)(int conn_id, uint16_t handle, int auth_req); |
| |
| /** Write a remote descriptor for a given characteristic */ |
| bt_status_t (*write_descriptor)(int conn_id, uint16_t handle, int auth_req, |
| std::vector<uint8_t> value); |
| |
| /** Execute a prepared write operation */ |
| bt_status_t (*execute_write)(int conn_id, int execute); |
| |
| /** |
| * Register to receive notifications or indications for a given |
| * characteristic |
| */ |
| bt_status_t (*register_for_notification)(int client_if, |
| const RawAddress& bd_addr, |
| uint16_t handle); |
| |
| /** Deregister a previous request for notifications/indications */ |
| bt_status_t (*deregister_for_notification)(int client_if, |
| const RawAddress& bd_addr, |
| uint16_t handle); |
| |
| /** Request RSSI for a given remote device */ |
| bt_status_t (*read_remote_rssi)(int client_if, const RawAddress& bd_addr); |
| |
| /** Determine the type of the remote device (LE, BR/EDR, Dual-mode) */ |
| int (*get_device_type)(const RawAddress& bd_addr); |
| |
| /** Configure the MTU for a given connection */ |
| bt_status_t (*configure_mtu)(int conn_id, int mtu); |
| |
| /** Request a connection parameter update */ |
| bt_status_t (*conn_parameter_update)(const RawAddress& bd_addr, |
| int min_interval, int max_interval, |
| int latency, int timeout, |
| uint16_t min_ce_len, |
| uint16_t max_ce_len); |
| |
| bt_status_t (*set_preferred_phy)(const RawAddress& bd_addr, uint8_t tx_phy, |
| uint8_t rx_phy, uint16_t phy_options); |
| |
| bt_status_t (*read_phy)( |
| const RawAddress& bd_addr, |
| base::Callback<void(uint8_t tx_phy, uint8_t rx_phy, uint8_t status)> cb); |
| |
| /** Test mode interface */ |
| bt_status_t (*test_command)(int command, const btgatt_test_params_t& params); |
| |
| /** Get gatt db content */ |
| bt_status_t (*get_gatt_db)(int conn_id); |
| |
| } btgatt_client_interface_t; |
| |
| __END_DECLS |
| |
| #endif /* ANDROID_INCLUDE_BT_GATT_CLIENT_H */ |