| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains security manager protocol utility functions |
| * |
| ******************************************************************************/ |
| #include "bt_target.h" |
| |
| #if SMP_INCLUDED == TRUE |
| #if SMP_DEBUG == TRUE |
| #include <stdio.h> |
| #endif |
| #include <string.h> |
| #include "bt_utils.h" |
| #include "btm_ble_api.h" |
| #include "smp_int.h" |
| #include "btm_int.h" |
| #include "btm_ble_int.h" |
| #include "hcimsgs.h" |
| #include "aes.h" |
| #include "p_256_ecc_pp.h" |
| #include "device/include/controller.h" |
| |
| #ifndef SMP_MAX_ENC_REPEAT |
| #define SMP_MAX_ENC_REPEAT 3 |
| #endif |
| |
| static void smp_rand_back(tBTM_RAND_ENC *p); |
| static void smp_generate_confirm(tSMP_CB *p_cb, tSMP_INT_DATA *p_data); |
| static void smp_generate_ltk_cont(tSMP_CB *p_cb, tSMP_INT_DATA *p_data); |
| static void smp_generate_y(tSMP_CB *p_cb, tSMP_INT_DATA *p); |
| static void smp_generate_rand_vector (tSMP_CB *p_cb, tSMP_INT_DATA *p); |
| static void smp_process_stk(tSMP_CB *p_cb, tSMP_ENC *p); |
| static void smp_calculate_comfirm_cont(tSMP_CB *p_cb, tSMP_ENC *p); |
| static void smp_process_confirm(tSMP_CB *p_cb, tSMP_ENC *p); |
| static void smp_process_compare(tSMP_CB *p_cb, tSMP_ENC *p); |
| static void smp_process_ediv(tSMP_CB *p_cb, tSMP_ENC *p); |
| static BOOLEAN smp_calculate_legacy_short_term_key(tSMP_CB *p_cb, tSMP_ENC *output); |
| static void smp_continue_private_key_creation(tSMP_CB *p_cb, tBTM_RAND_ENC *p); |
| static void smp_process_private_key(tSMP_CB *p_cb); |
| static void smp_finish_nonce_generation(tSMP_CB *p_cb); |
| static void smp_process_new_nonce(tSMP_CB *p_cb); |
| |
| #define SMP_PASSKEY_MASK 0xfff00000 |
| |
| void smp_debug_print_nbyte_little_endian(UINT8 *p, const UINT8 *key_name, UINT8 len) |
| { |
| #if SMP_DEBUG == TRUE |
| int ind, x; |
| int col_count = 32; |
| int row_count; |
| UINT8 p_buf[512]; |
| |
| SMP_TRACE_WARNING("%s(LSB ~ MSB):", key_name); |
| memset(p_buf, 0, sizeof(p_buf)); |
| row_count = len % col_count ? len / col_count + 1: len / col_count; |
| |
| ind = 0; |
| for (int row = 0; row < row_count; row++) |
| { |
| for (int column = 0, x = 0; (ind < len) && (column < col_count); column++, ind++) |
| { |
| x += sprintf((char *)&p_buf[x], "%02x ", p[ind]); |
| } |
| SMP_TRACE_WARNING(" [%03d]: %s", row * col_count, p_buf); |
| } |
| #endif |
| } |
| |
| void smp_debug_print_nbyte_big_endian (UINT8 *p, const UINT8 *key_name, UINT8 len) |
| { |
| #if SMP_DEBUG == TRUE |
| UINT8 p_buf[512]; |
| |
| SMP_TRACE_WARNING("%s(MSB ~ LSB):", key_name); |
| memset(p_buf, 0, sizeof(p_buf)); |
| |
| int ind = 0; |
| int ncols = 32; /* num entries in one line */ |
| int nrows; /* num lines */ |
| int x; |
| |
| nrows = len % ncols ? len / ncols + 1: len / ncols; |
| for (int row = 0; row < nrows; row++) |
| { |
| for (int col = 0, x = 0; (ind < len) && (col < ncols); col++, ind++) |
| { |
| x += sprintf ((char *)&p_buf[len-x-1], "%02x ", p[ind]); |
| } |
| SMP_TRACE_WARNING("[%03d]: %s", row * ncols, p_buf); |
| } |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_encrypt_data |
| ** |
| ** Description This function is called to encrypt data. |
| ** It uses AES-128 encryption algorithm. |
| ** Plain_text is encrypted using key, the result is at p_out. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BOOLEAN smp_encrypt_data (UINT8 *key, UINT8 key_len, |
| UINT8 *plain_text, UINT8 pt_len, |
| tSMP_ENC *p_out) |
| { |
| aes_context ctx; |
| UINT8 *p_start = NULL; |
| UINT8 *p = NULL; |
| UINT8 *p_rev_data = NULL; /* input data in big endilan format */ |
| UINT8 *p_rev_key = NULL; /* input key in big endilan format */ |
| UINT8 *p_rev_output = NULL; /* encrypted output in big endilan format */ |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| if ( (p_out == NULL ) || (key_len != SMP_ENCRYT_KEY_SIZE) ) |
| { |
| SMP_TRACE_ERROR ("%s failed", __func__); |
| return FALSE; |
| } |
| |
| p_start = (UINT8 *)osi_calloc(SMP_ENCRYT_DATA_SIZE * 4); |
| |
| if (pt_len > SMP_ENCRYT_DATA_SIZE) |
| pt_len = SMP_ENCRYT_DATA_SIZE; |
| |
| p = p_start; |
| ARRAY_TO_STREAM (p, plain_text, pt_len); /* byte 0 to byte 15 */ |
| p_rev_data = p = p_start + SMP_ENCRYT_DATA_SIZE; /* start at byte 16 */ |
| REVERSE_ARRAY_TO_STREAM (p, p_start, SMP_ENCRYT_DATA_SIZE); /* byte 16 to byte 31 */ |
| p_rev_key = p; /* start at byte 32 */ |
| REVERSE_ARRAY_TO_STREAM (p, key, SMP_ENCRYT_KEY_SIZE); /* byte 32 to byte 47 */ |
| |
| #if SMP_DEBUG == TRUE && SMP_DEBUG_VERBOSE == TRUE |
| smp_debug_print_nbyte_little_endian(key, (const UINT8 *)"Key", SMP_ENCRYT_KEY_SIZE); |
| smp_debug_print_nbyte_little_endian(p_start, (const UINT8 *)"Plain text", SMP_ENCRYT_DATA_SIZE); |
| #endif |
| p_rev_output = p; |
| aes_set_key(p_rev_key, SMP_ENCRYT_KEY_SIZE, &ctx); |
| aes_encrypt(p_rev_data, p, &ctx); /* outputs in byte 48 to byte 63 */ |
| |
| p = p_out->param_buf; |
| REVERSE_ARRAY_TO_STREAM (p, p_rev_output, SMP_ENCRYT_DATA_SIZE); |
| #if SMP_DEBUG == TRUE && SMP_DEBUG_VERBOSE == TRUE |
| smp_debug_print_nbyte_little_endian(p_out->param_buf, (const UINT8 *)"Encrypted text", SMP_ENCRYT_KEY_SIZE); |
| #endif |
| |
| p_out->param_len = SMP_ENCRYT_KEY_SIZE; |
| p_out->status = HCI_SUCCESS; |
| p_out->opcode = HCI_BLE_ENCRYPT; |
| |
| osi_free(p_start); |
| |
| return TRUE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_passkey |
| ** |
| ** Description This function is called to generate passkey. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_generate_passkey(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| p_cb->rand_enc_proc_state = SMP_GEN_TK; |
| |
| /* generate MRand or SRand */ |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_proc_passkey |
| ** |
| ** Description This function is called to process a passkey. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_proc_passkey(tSMP_CB *p_cb , tBTM_RAND_ENC *p) |
| { |
| UINT8 *tt = p_cb->tk; |
| tSMP_KEY key; |
| UINT32 passkey; /* 19655 test number; */ |
| UINT8 *pp = p->param_buf; |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| STREAM_TO_UINT32(passkey, pp); |
| passkey &= ~SMP_PASSKEY_MASK; |
| |
| /* truncate by maximum value */ |
| while (passkey > BTM_MAX_PASSKEY_VAL) |
| passkey >>= 1; |
| |
| /* save the TK */ |
| memset(p_cb->tk, 0, BT_OCTET16_LEN); |
| UINT32_TO_STREAM(tt, passkey); |
| |
| key.key_type = SMP_KEY_TYPE_TK; |
| key.p_data = p_cb->tk; |
| |
| if (p_cb->p_callback) |
| { |
| (*p_cb->p_callback)(SMP_PASSKEY_NOTIF_EVT, p_cb->pairing_bda, (tSMP_EVT_DATA *)&passkey); |
| } |
| |
| if (p_cb->selected_association_model == SMP_MODEL_SEC_CONN_PASSKEY_DISP) |
| { |
| smp_sm_event(&smp_cb, SMP_KEY_READY_EVT, &passkey); |
| } |
| else |
| { |
| smp_sm_event(p_cb, SMP_KEY_READY_EVT, (tSMP_INT_DATA *)&key); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_stk |
| ** |
| ** Description This function is called to generate STK calculated by running |
| ** AES with the TK value as key and a concatenation of the random |
| ** values. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_generate_stk(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| tSMP_ENC output; |
| tSMP_STATUS status = SMP_PAIR_FAIL_UNKNOWN; |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| |
| if (p_cb->le_secure_connections_mode_is_used) |
| { |
| SMP_TRACE_WARNING ("FOR LE SC LTK IS USED INSTEAD OF STK"); |
| output.param_len = SMP_ENCRYT_KEY_SIZE; |
| output.status = HCI_SUCCESS; |
| output.opcode = HCI_BLE_ENCRYPT; |
| memcpy(output.param_buf, p_cb->ltk, SMP_ENCRYT_DATA_SIZE); |
| } |
| else if (!smp_calculate_legacy_short_term_key(p_cb, &output)) |
| { |
| SMP_TRACE_ERROR("%s failed", __func__); |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status); |
| return; |
| } |
| |
| smp_process_stk(p_cb, &output); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_srand_mrand_confirm |
| ** |
| ** Description This function is called to start the second pairing phase by |
| ** start generating random number. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_generate_srand_mrand_confirm(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| p_cb->rand_enc_proc_state = SMP_GEN_SRAND_MRAND; |
| /* generate MRand or SRand */ |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_rand_cont |
| ** |
| ** Description This function is called to generate another 64 bits random for |
| ** MRand or Srand. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_generate_rand_cont(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| p_cb->rand_enc_proc_state = SMP_GEN_SRAND_MRAND_CONT; |
| /* generate 64 MSB of MRand or SRand */ |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_ltk |
| ** |
| ** Description This function is called: |
| ** - in legacy pairing - to calculate LTK, starting with DIV |
| ** generation; |
| ** - in LE Secure Connections pairing over LE transport - to process LTK |
| ** already generated to encrypt LE link; |
| ** - in LE Secure Connections pairing over BR/EDR transport - to start |
| ** BR/EDR Link Key processing. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_generate_ltk(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| BOOLEAN div_status; |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| if (smp_get_br_state() == SMP_BR_STATE_BOND_PENDING) |
| { |
| smp_br_process_link_key(p_cb, NULL); |
| return; |
| } |
| else if (p_cb->le_secure_connections_mode_is_used) |
| { |
| smp_process_secure_connection_long_term_key(); |
| return; |
| } |
| |
| div_status = btm_get_local_div(p_cb->pairing_bda, &p_cb->div); |
| |
| if (div_status) |
| { |
| smp_generate_ltk_cont(p_cb, NULL); |
| } |
| else |
| { |
| SMP_TRACE_DEBUG ("Generate DIV for LTK"); |
| p_cb->rand_enc_proc_state = SMP_GEN_DIV_LTK; |
| /* generate MRand or SRand */ |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_compute_csrk |
| ** |
| ** Description This function is called to calculate CSRK |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_compute_csrk(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| BT_OCTET16 er; |
| UINT8 buffer[4]; /* for (r || DIV) r=1*/ |
| UINT16 r=1; |
| UINT8 *p=buffer; |
| tSMP_ENC output; |
| tSMP_STATUS status = SMP_PAIR_FAIL_UNKNOWN; |
| |
| SMP_TRACE_DEBUG ("smp_compute_csrk div=%x", p_cb->div); |
| BTM_GetDeviceEncRoot(er); |
| /* CSRK = d1(ER, DIV, 1) */ |
| UINT16_TO_STREAM(p, p_cb->div); |
| UINT16_TO_STREAM(p, r); |
| |
| if (!SMP_Encrypt(er, BT_OCTET16_LEN, buffer, 4, &output)) |
| { |
| SMP_TRACE_ERROR("smp_generate_csrk failed"); |
| if (p_cb->smp_over_br) |
| { |
| smp_br_state_machine_event(p_cb, SMP_BR_AUTH_CMPL_EVT, &status); |
| } |
| else |
| { |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status); |
| } |
| } |
| else |
| { |
| memcpy((void *)p_cb->csrk, output.param_buf, BT_OCTET16_LEN); |
| smp_send_csrk_info(p_cb, NULL); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_csrk |
| ** |
| ** Description This function is called to calculate CSRK, starting with DIV |
| ** generation. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_generate_csrk(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| BOOLEAN div_status; |
| |
| SMP_TRACE_DEBUG ("smp_generate_csrk"); |
| |
| div_status = btm_get_local_div(p_cb->pairing_bda, &p_cb->div); |
| if (div_status) |
| { |
| smp_compute_csrk(p_cb, NULL); |
| } |
| else |
| { |
| SMP_TRACE_DEBUG ("Generate DIV for CSRK"); |
| p_cb->rand_enc_proc_state = SMP_GEN_DIV_CSRK; |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| } |
| } |
| |
| /******************************************************************************* |
| ** Function smp_concatenate_peer |
| ** add pairing command sent from local device into p1. |
| *******************************************************************************/ |
| void smp_concatenate_local( tSMP_CB *p_cb, UINT8 **p_data, UINT8 op_code) |
| { |
| UINT8 *p = *p_data; |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| UINT8_TO_STREAM(p, op_code); |
| UINT8_TO_STREAM(p, p_cb->local_io_capability); |
| UINT8_TO_STREAM(p, p_cb->loc_oob_flag); |
| UINT8_TO_STREAM(p, p_cb->loc_auth_req); |
| UINT8_TO_STREAM(p, p_cb->loc_enc_size); |
| UINT8_TO_STREAM(p, p_cb->local_i_key); |
| UINT8_TO_STREAM(p, p_cb->local_r_key); |
| |
| *p_data = p; |
| } |
| |
| /******************************************************************************* |
| ** Function smp_concatenate_peer |
| ** add pairing command received from peer device into p1. |
| *******************************************************************************/ |
| void smp_concatenate_peer( tSMP_CB *p_cb, UINT8 **p_data, UINT8 op_code) |
| { |
| UINT8 *p = *p_data; |
| |
| SMP_TRACE_DEBUG ("smp_concatenate_peer "); |
| UINT8_TO_STREAM(p, op_code); |
| UINT8_TO_STREAM(p, p_cb->peer_io_caps); |
| UINT8_TO_STREAM(p, p_cb->peer_oob_flag); |
| UINT8_TO_STREAM(p, p_cb->peer_auth_req); |
| UINT8_TO_STREAM(p, p_cb->peer_enc_size); |
| UINT8_TO_STREAM(p, p_cb->peer_i_key); |
| UINT8_TO_STREAM(p, p_cb->peer_r_key); |
| |
| *p_data = p; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_gen_p1_4_confirm |
| ** |
| ** Description Generate Confirm/Compare Step1: |
| ** p1 = pres || preq || rat' || iat' |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_gen_p1_4_confirm( tSMP_CB *p_cb, BT_OCTET16 p1) |
| { |
| UINT8 *p = (UINT8 *)p1; |
| tBLE_ADDR_TYPE addr_type = 0; |
| BD_ADDR remote_bda; |
| |
| SMP_TRACE_DEBUG ("smp_gen_p1_4_confirm"); |
| |
| if (!BTM_ReadRemoteConnectionAddr(p_cb->pairing_bda, remote_bda, &addr_type)) |
| { |
| SMP_TRACE_ERROR("can not generate confirm for unknown device"); |
| return; |
| } |
| |
| BTM_ReadConnectionAddr( p_cb->pairing_bda, p_cb->local_bda, &p_cb->addr_type); |
| |
| if (p_cb->role == HCI_ROLE_MASTER) |
| { |
| /* LSB : rat': initiator's(local) address type */ |
| UINT8_TO_STREAM(p, p_cb->addr_type); |
| /* LSB : iat': responder's address type */ |
| UINT8_TO_STREAM(p, addr_type); |
| /* concatinate preq */ |
| smp_concatenate_local(p_cb, &p, SMP_OPCODE_PAIRING_REQ); |
| /* concatinate pres */ |
| smp_concatenate_peer(p_cb, &p, SMP_OPCODE_PAIRING_RSP); |
| } |
| else |
| { |
| /* LSB : iat': initiator's address type */ |
| UINT8_TO_STREAM(p, addr_type); |
| /* LSB : rat': responder's(local) address type */ |
| UINT8_TO_STREAM(p, p_cb->addr_type); |
| /* concatinate preq */ |
| smp_concatenate_peer(p_cb, &p, SMP_OPCODE_PAIRING_REQ); |
| /* concatinate pres */ |
| smp_concatenate_local(p_cb, &p, SMP_OPCODE_PAIRING_RSP); |
| } |
| #if SMP_DEBUG == TRUE |
| SMP_TRACE_DEBUG("p1 = pres || preq || rat' || iat'"); |
| smp_debug_print_nbyte_little_endian ((UINT8 *)p1, (const UINT8 *)"P1", 16); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_gen_p2_4_confirm |
| ** |
| ** Description Generate Confirm/Compare Step2: |
| ** p2 = padding || ia || ra |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_gen_p2_4_confirm( tSMP_CB *p_cb, BT_OCTET16 p2) |
| { |
| UINT8 *p = (UINT8 *)p2; |
| BD_ADDR remote_bda; |
| tBLE_ADDR_TYPE addr_type = 0; |
| |
| if (!BTM_ReadRemoteConnectionAddr(p_cb->pairing_bda, remote_bda, &addr_type)) |
| { |
| SMP_TRACE_ERROR("can not generate confirm p2 for unknown device"); |
| return; |
| } |
| |
| SMP_TRACE_DEBUG ("smp_gen_p2_4_confirm"); |
| |
| memset(p, 0, sizeof(BT_OCTET16)); |
| |
| if (p_cb->role == HCI_ROLE_MASTER) |
| { |
| /* LSB ra */ |
| BDADDR_TO_STREAM(p, remote_bda); |
| /* ia */ |
| BDADDR_TO_STREAM(p, p_cb->local_bda); |
| } |
| else |
| { |
| /* LSB ra */ |
| BDADDR_TO_STREAM(p, p_cb->local_bda); |
| /* ia */ |
| BDADDR_TO_STREAM(p, remote_bda); |
| } |
| #if SMP_DEBUG == TRUE |
| SMP_TRACE_DEBUG("p2 = padding || ia || ra"); |
| smp_debug_print_nbyte_little_endian(p2, (const UINT8 *)"p2", 16); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_comfirm |
| ** |
| ** Description This function is called to calculate Confirm value. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_calculate_comfirm (tSMP_CB *p_cb, BT_OCTET16 rand, BD_ADDR bda) |
| { |
| UNUSED(bda); |
| |
| BT_OCTET16 p1; |
| tSMP_ENC output; |
| tSMP_STATUS status = SMP_PAIR_FAIL_UNKNOWN; |
| |
| SMP_TRACE_DEBUG ("smp_calculate_comfirm "); |
| /* generate p1 = pres || preq || rat' || iat' */ |
| smp_gen_p1_4_confirm(p_cb, p1); |
| |
| /* p1 = rand XOR p1 */ |
| smp_xor_128(p1, rand); |
| |
| smp_debug_print_nbyte_little_endian ((UINT8 *)p1, (const UINT8 *)"P1' = r XOR p1", 16); |
| |
| /* calculate e(k, r XOR p1), where k = TK */ |
| if (!SMP_Encrypt(p_cb->tk, BT_OCTET16_LEN, p1, BT_OCTET16_LEN, &output)) |
| { |
| SMP_TRACE_ERROR("smp_generate_csrk failed"); |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status); |
| } |
| else |
| { |
| smp_calculate_comfirm_cont(p_cb, &output); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_comfirm_cont |
| ** |
| ** Description This function is called when SConfirm/MConfirm is generated |
| ** proceed to send the Confirm request/response to peer device. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_calculate_comfirm_cont(tSMP_CB *p_cb, tSMP_ENC *p) |
| { |
| BT_OCTET16 p2; |
| tSMP_ENC output; |
| tSMP_STATUS status = SMP_PAIR_FAIL_UNKNOWN; |
| |
| SMP_TRACE_DEBUG ("smp_calculate_comfirm_cont "); |
| #if SMP_DEBUG == TRUE |
| SMP_TRACE_DEBUG("Confirm step 1 p1' = e(k, r XOR p1) Generated"); |
| smp_debug_print_nbyte_little_endian (p->param_buf, (const UINT8 *)"C1", 16); |
| #endif |
| |
| smp_gen_p2_4_confirm(p_cb, p2); |
| |
| /* calculate p2 = (p1' XOR p2) */ |
| smp_xor_128(p2, p->param_buf); |
| smp_debug_print_nbyte_little_endian ((UINT8 *)p2, (const UINT8 *)"p2' = C1 xor p2", 16); |
| |
| /* calculate: Confirm = E(k, p1' XOR p2) */ |
| if (!SMP_Encrypt(p_cb->tk, BT_OCTET16_LEN, p2, BT_OCTET16_LEN, &output)) |
| { |
| SMP_TRACE_ERROR("smp_calculate_comfirm_cont failed"); |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status); |
| } |
| else |
| { |
| switch (p_cb->rand_enc_proc_state) |
| { |
| case SMP_GEN_CONFIRM: |
| smp_process_confirm(p_cb, &output); |
| break; |
| |
| case SMP_GEN_COMPARE: |
| smp_process_compare(p_cb, &output); |
| break; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_confirm |
| ** |
| ** Description This function is called when a 48 bits random number is generated |
| ** as SRand or MRand, continue to calculate Sconfirm or MConfirm. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_generate_confirm(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| p_cb->rand_enc_proc_state = SMP_GEN_CONFIRM; |
| smp_debug_print_nbyte_little_endian ((UINT8 *)p_cb->rand, (const UINT8 *)"local rand", 16); |
| smp_calculate_comfirm(p_cb, p_cb->rand, p_cb->pairing_bda); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_compare |
| ** |
| ** Description This function is called to generate SConfirm for Slave device, |
| ** or MSlave for Master device. This function can be also used for |
| ** generating Compare number for confirm value check. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_generate_compare (tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| SMP_TRACE_DEBUG ("smp_generate_compare "); |
| p_cb->rand_enc_proc_state = SMP_GEN_COMPARE; |
| smp_debug_print_nbyte_little_endian ((UINT8 *)p_cb->rrand, (const UINT8 *)"peer rand", 16); |
| smp_calculate_comfirm(p_cb, p_cb->rrand, p_cb->local_bda); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_process_confirm |
| ** |
| ** Description This function is called when SConfirm/MConfirm is generated |
| ** proceed to send the Confirm request/response to peer device. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_process_confirm(tSMP_CB *p_cb, tSMP_ENC *p) |
| { |
| tSMP_KEY key; |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| memcpy(p_cb->confirm, p->param_buf, BT_OCTET16_LEN); |
| |
| #if (SMP_DEBUG == TRUE) |
| SMP_TRACE_DEBUG("Confirm Generated"); |
| smp_debug_print_nbyte_little_endian ((UINT8 *)p_cb->confirm, (const UINT8 *)"Confirm", 16); |
| #endif |
| |
| key.key_type = SMP_KEY_TYPE_CFM; |
| key.p_data = p->param_buf; |
| smp_sm_event(p_cb, SMP_KEY_READY_EVT, &key); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_process_compare |
| ** |
| ** Description This function is called when Compare is generated using the |
| ** RRand and local BDA, TK information. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_process_compare(tSMP_CB *p_cb, tSMP_ENC *p) |
| { |
| tSMP_KEY key; |
| |
| SMP_TRACE_DEBUG ("smp_process_compare "); |
| #if (SMP_DEBUG == TRUE) |
| SMP_TRACE_DEBUG("Compare Generated"); |
| smp_debug_print_nbyte_little_endian (p->param_buf, (const UINT8 *)"Compare", 16); |
| #endif |
| key.key_type = SMP_KEY_TYPE_CMP; |
| key.p_data = p->param_buf; |
| |
| smp_sm_event(p_cb, SMP_KEY_READY_EVT, &key); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_process_stk |
| ** |
| ** Description This function is called when STK is generated |
| ** proceed to send the encrypt the link using STK. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_process_stk(tSMP_CB *p_cb, tSMP_ENC *p) |
| { |
| tSMP_KEY key; |
| |
| SMP_TRACE_DEBUG ("smp_process_stk "); |
| #if (SMP_DEBUG == TRUE) |
| SMP_TRACE_ERROR("STK Generated"); |
| #endif |
| smp_mask_enc_key(p_cb->loc_enc_size, p->param_buf); |
| |
| key.key_type = SMP_KEY_TYPE_STK; |
| key.p_data = p->param_buf; |
| |
| smp_sm_event(p_cb, SMP_KEY_READY_EVT, &key); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_ltk_cont |
| ** |
| ** Description This function is to calculate LTK = d1(ER, DIV, 0)= e(ER, DIV) |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_generate_ltk_cont(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| BT_OCTET16 er; |
| tSMP_ENC output; |
| tSMP_STATUS status = SMP_PAIR_FAIL_UNKNOWN; |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| BTM_GetDeviceEncRoot(er); |
| |
| /* LTK = d1(ER, DIV, 0)= e(ER, DIV)*/ |
| if (!SMP_Encrypt(er, BT_OCTET16_LEN, (UINT8 *)&p_cb->div, |
| sizeof(UINT16), &output)) |
| { |
| SMP_TRACE_ERROR("%s failed", __func__); |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status); |
| } |
| else |
| { |
| /* mask the LTK */ |
| smp_mask_enc_key(p_cb->loc_enc_size, output.param_buf); |
| memcpy((void *)p_cb->ltk, output.param_buf, BT_OCTET16_LEN); |
| smp_generate_rand_vector(p_cb, NULL); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_y |
| ** |
| ** Description This function is to proceed generate Y = E(DHK, Rand) |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_generate_y(tSMP_CB *p_cb, tSMP_INT_DATA *p) |
| { |
| UNUSED(p); |
| |
| BT_OCTET16 dhk; |
| tSMP_ENC output; |
| tSMP_STATUS status = SMP_PAIR_FAIL_UNKNOWN; |
| |
| |
| SMP_TRACE_DEBUG ("smp_generate_y "); |
| BTM_GetDeviceDHK(dhk); |
| |
| if (!SMP_Encrypt(dhk, BT_OCTET16_LEN, p_cb->enc_rand, |
| BT_OCTET8_LEN, &output)) |
| { |
| SMP_TRACE_ERROR("smp_generate_y failed"); |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status); |
| } |
| else |
| { |
| smp_process_ediv(p_cb, &output); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_generate_rand_vector |
| ** |
| ** Description This function is called when LTK is generated, send state machine |
| ** event to SMP. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_generate_rand_vector (tSMP_CB *p_cb, tSMP_INT_DATA *p) |
| { |
| UNUSED(p); |
| |
| /* generate EDIV and rand now */ |
| /* generate random vector */ |
| SMP_TRACE_DEBUG ("smp_generate_rand_vector "); |
| p_cb->rand_enc_proc_state = SMP_GEN_RAND_V; |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_process_ediv |
| ** |
| ** Description This function is to calculate EDIV = Y xor DIV |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_process_ediv(tSMP_CB *p_cb, tSMP_ENC *p) |
| { |
| tSMP_KEY key; |
| UINT8 *pp= p->param_buf; |
| UINT16 y; |
| |
| SMP_TRACE_DEBUG ("smp_process_ediv "); |
| STREAM_TO_UINT16(y, pp); |
| |
| /* EDIV = Y xor DIV */ |
| p_cb->ediv = p_cb->div ^ y; |
| /* send LTK ready */ |
| SMP_TRACE_ERROR("LTK ready"); |
| key.key_type = SMP_KEY_TYPE_LTK; |
| key.p_data = p->param_buf; |
| |
| smp_sm_event(p_cb, SMP_KEY_READY_EVT, &key); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_legacy_short_term_key |
| ** |
| ** Description The function calculates legacy STK. |
| ** |
| ** Returns FALSE if out of resources, TRUE in other cases. |
| ** |
| *******************************************************************************/ |
| BOOLEAN smp_calculate_legacy_short_term_key(tSMP_CB *p_cb, tSMP_ENC *output) |
| { |
| BT_OCTET16 ptext; |
| UINT8 *p = ptext; |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| memset(p, 0, BT_OCTET16_LEN); |
| if (p_cb->role == HCI_ROLE_MASTER) |
| { |
| memcpy(p, p_cb->rand, BT_OCTET8_LEN); |
| memcpy(&p[BT_OCTET8_LEN], p_cb->rrand, BT_OCTET8_LEN); |
| } |
| else |
| { |
| memcpy(p, p_cb->rrand, BT_OCTET8_LEN); |
| memcpy(&p[BT_OCTET8_LEN], p_cb->rand, BT_OCTET8_LEN); |
| } |
| |
| BOOLEAN encrypted; |
| /* generate STK = Etk(rand|rrand)*/ |
| encrypted = SMP_Encrypt( p_cb->tk, BT_OCTET16_LEN, ptext, BT_OCTET16_LEN, output); |
| if (!encrypted) |
| { |
| SMP_TRACE_ERROR("%s failed", __func__); |
| } |
| return encrypted; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_create_private_key |
| ** |
| ** Description This function is called to create private key used to |
| ** calculate public key and DHKey. |
| ** The function starts private key creation requesting controller |
| ** to generate [0-7] octets of private key. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_create_private_key(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| SMP_TRACE_DEBUG ("%s",__FUNCTION__); |
| p_cb->rand_enc_proc_state = SMP_GENERATE_PRIVATE_KEY_0_7; |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_use_oob_private_key |
| ** |
| ** Description This function is called |
| ** - to save the secret key used to calculate the public key used |
| ** in calculations of commitment sent OOB to a peer |
| ** - to use this secret key to recalculate the public key and |
| ** start the process of sending this public key to the peer |
| ** if secret/public keys have to be reused. |
| ** If the keys aren't supposed to be reused, continue from the |
| ** point from which request for OOB data was issued. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_use_oob_private_key(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| SMP_TRACE_DEBUG ("%s req_oob_type: %d, role: %d", |
| __func__, p_cb->req_oob_type, p_cb->role); |
| |
| switch (p_cb->req_oob_type) |
| { |
| case SMP_OOB_BOTH: |
| case SMP_OOB_LOCAL: |
| SMP_TRACE_DEBUG("%s restore secret key", __func__) |
| memcpy(p_cb->private_key, p_cb->sc_oob_data.loc_oob_data.private_key_used, BT_OCTET32_LEN); |
| smp_process_private_key(p_cb); |
| break; |
| default: |
| SMP_TRACE_DEBUG("%s create secret key anew", __func__); |
| smp_set_state(SMP_STATE_PAIR_REQ_RSP); |
| smp_decide_association_model(p_cb, NULL); |
| break; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_continue_private_key_creation |
| ** |
| ** Description This function is used to continue private key creation. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_continue_private_key_creation (tSMP_CB *p_cb, tBTM_RAND_ENC *p) |
| { |
| UINT8 state = p_cb->rand_enc_proc_state & ~0x80; |
| SMP_TRACE_DEBUG ("%s state=0x%x", __func__, state); |
| |
| switch (state) |
| { |
| case SMP_GENERATE_PRIVATE_KEY_0_7: |
| memcpy((void *)p_cb->private_key, p->param_buf, p->param_len); |
| p_cb->rand_enc_proc_state = SMP_GENERATE_PRIVATE_KEY_8_15; |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| break; |
| |
| case SMP_GENERATE_PRIVATE_KEY_8_15: |
| memcpy((void *)&p_cb->private_key[8], p->param_buf, p->param_len); |
| p_cb->rand_enc_proc_state = SMP_GENERATE_PRIVATE_KEY_16_23; |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| break; |
| |
| case SMP_GENERATE_PRIVATE_KEY_16_23: |
| memcpy((void *)&p_cb->private_key[16], p->param_buf, p->param_len); |
| p_cb->rand_enc_proc_state = SMP_GENERATE_PRIVATE_KEY_24_31; |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| break; |
| |
| case SMP_GENERATE_PRIVATE_KEY_24_31: |
| memcpy((void *)&p_cb->private_key[24], p->param_buf, p->param_len); |
| smp_process_private_key (p_cb); |
| break; |
| |
| default: |
| break; |
| } |
| |
| return; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_process_private_key |
| ** |
| ** Description This function processes private key. |
| ** It calculates public key and notifies SM that private key / |
| ** public key pair is created. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_process_private_key(tSMP_CB *p_cb) |
| { |
| Point public_key; |
| BT_OCTET32 private_key; |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| |
| memcpy(private_key, p_cb->private_key, BT_OCTET32_LEN); |
| ECC_PointMult(&public_key, &(curve_p256.G), (DWORD*) private_key, KEY_LENGTH_DWORDS_P256); |
| memcpy(p_cb->loc_publ_key.x, public_key.x, BT_OCTET32_LEN); |
| memcpy(p_cb->loc_publ_key.y, public_key.y, BT_OCTET32_LEN); |
| |
| smp_debug_print_nbyte_little_endian (p_cb->private_key, (const UINT8 *)"private", |
| BT_OCTET32_LEN); |
| smp_debug_print_nbyte_little_endian (p_cb->loc_publ_key.x, (const UINT8 *)"local public(x)", |
| BT_OCTET32_LEN); |
| smp_debug_print_nbyte_little_endian (p_cb->loc_publ_key.y, (const UINT8 *)"local public(y)", |
| BT_OCTET32_LEN); |
| p_cb->flags |= SMP_PAIR_FLAG_HAVE_LOCAL_PUBL_KEY; |
| smp_sm_event(p_cb, SMP_LOC_PUBL_KEY_CRTD_EVT, NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_compute_dhkey |
| ** |
| ** Description The function: |
| ** - calculates a new public key using as input local private |
| ** key and peer public key; |
| ** - saves the new public key x-coordinate as DHKey. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_compute_dhkey (tSMP_CB *p_cb) |
| { |
| Point peer_publ_key, new_publ_key; |
| BT_OCTET32 private_key; |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| |
| memcpy(private_key, p_cb->private_key, BT_OCTET32_LEN); |
| memcpy(peer_publ_key.x, p_cb->peer_publ_key.x, BT_OCTET32_LEN); |
| memcpy(peer_publ_key.y, p_cb->peer_publ_key.y, BT_OCTET32_LEN); |
| |
| ECC_PointMult(&new_publ_key, &peer_publ_key, (DWORD*) private_key, KEY_LENGTH_DWORDS_P256); |
| |
| memcpy(p_cb->dhkey, new_publ_key.x, BT_OCTET32_LEN); |
| |
| smp_debug_print_nbyte_little_endian (p_cb->dhkey, (const UINT8 *)"Old DHKey", |
| BT_OCTET32_LEN); |
| |
| smp_debug_print_nbyte_little_endian (p_cb->private_key, (const UINT8 *)"private", |
| BT_OCTET32_LEN); |
| smp_debug_print_nbyte_little_endian (p_cb->peer_publ_key.x, (const UINT8 *)"rem public(x)", |
| BT_OCTET32_LEN); |
| smp_debug_print_nbyte_little_endian (p_cb->peer_publ_key.y, (const UINT8 *)"rem public(y)", |
| BT_OCTET32_LEN); |
| smp_debug_print_nbyte_little_endian (p_cb->dhkey, (const UINT8 *)"Reverted DHKey", |
| BT_OCTET32_LEN); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_local_commitment |
| ** |
| ** Description The function calculates and saves local commmitment in CB. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_calculate_local_commitment(tSMP_CB *p_cb) |
| { |
| UINT8 random_input; |
| |
| SMP_TRACE_DEBUG("%s", __FUNCTION__); |
| |
| switch (p_cb->selected_association_model) |
| { |
| case SMP_MODEL_SEC_CONN_JUSTWORKS: |
| case SMP_MODEL_SEC_CONN_NUM_COMP: |
| if (p_cb->role == HCI_ROLE_MASTER) |
| SMP_TRACE_WARNING ("local commitment calc on master is not expected \ |
| for Just Works/Numeric Comparison models"); |
| smp_calculate_f4(p_cb->loc_publ_key.x, p_cb->peer_publ_key.x, p_cb->rand, 0, |
| p_cb->commitment); |
| break; |
| case SMP_MODEL_SEC_CONN_PASSKEY_ENT: |
| case SMP_MODEL_SEC_CONN_PASSKEY_DISP: |
| random_input = smp_calculate_random_input(p_cb->local_random, p_cb->round); |
| smp_calculate_f4(p_cb->loc_publ_key.x, p_cb->peer_publ_key.x, p_cb->rand, |
| random_input, p_cb->commitment); |
| break; |
| case SMP_MODEL_SEC_CONN_OOB: |
| SMP_TRACE_WARNING ("local commitment calc is expected for OOB model BEFORE pairing"); |
| smp_calculate_f4(p_cb->loc_publ_key.x, p_cb->loc_publ_key.x, p_cb->local_random, 0, |
| p_cb->commitment); |
| break; |
| default: |
| SMP_TRACE_ERROR("Association Model = %d is not used in LE SC", |
| p_cb->selected_association_model); |
| return; |
| } |
| |
| SMP_TRACE_EVENT ("local commitment calculation is completed"); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_peer_commitment |
| ** |
| ** Description The function calculates and saves peer commmitment at the |
| ** provided output buffer. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_calculate_peer_commitment(tSMP_CB *p_cb, BT_OCTET16 output_buf) |
| { |
| UINT8 ri; |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| |
| switch (p_cb->selected_association_model) |
| { |
| case SMP_MODEL_SEC_CONN_JUSTWORKS: |
| case SMP_MODEL_SEC_CONN_NUM_COMP: |
| if (p_cb->role == HCI_ROLE_SLAVE) |
| SMP_TRACE_WARNING ("peer commitment calc on slave is not expected \ |
| for Just Works/Numeric Comparison models"); |
| smp_calculate_f4(p_cb->peer_publ_key.x, p_cb->loc_publ_key.x, p_cb->rrand, 0, |
| output_buf); |
| break; |
| case SMP_MODEL_SEC_CONN_PASSKEY_ENT: |
| case SMP_MODEL_SEC_CONN_PASSKEY_DISP: |
| ri = smp_calculate_random_input(p_cb->peer_random, p_cb->round); |
| smp_calculate_f4(p_cb->peer_publ_key.x, p_cb->loc_publ_key.x, p_cb->rrand, ri, |
| output_buf); |
| break; |
| case SMP_MODEL_SEC_CONN_OOB: |
| smp_calculate_f4(p_cb->peer_publ_key.x, p_cb->peer_publ_key.x, p_cb->peer_random, 0, |
| output_buf); |
| break; |
| default: |
| SMP_TRACE_ERROR("Association Model = %d is not used in LE SC", |
| p_cb->selected_association_model); |
| return; |
| } |
| |
| SMP_TRACE_EVENT ("peer commitment calculation is completed"); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_f4 |
| ** |
| ** Description The function calculates |
| ** C = f4(U, V, X, Z) = AES-CMAC (U||V||Z) |
| ** X |
| ** where |
| ** input: U is 256 bit, |
| ** V is 256 bit, |
| ** X is 128 bit, |
| ** Z is 8 bit, |
| ** output: C is 128 bit. |
| ** |
| ** Returns void |
| ** |
| ** Note The LSB is the first octet, the MSB is the last octet of |
| ** the AES-CMAC input/output stream. |
| ** |
| *******************************************************************************/ |
| void smp_calculate_f4(UINT8 *u, UINT8 *v, UINT8 *x, UINT8 z, UINT8 *c) |
| { |
| UINT8 msg_len = BT_OCTET32_LEN /* U size */ + BT_OCTET32_LEN /* V size */ + 1 /* Z size */; |
| UINT8 msg[BT_OCTET32_LEN + BT_OCTET32_LEN + 1]; |
| UINT8 key[BT_OCTET16_LEN]; |
| UINT8 cmac[BT_OCTET16_LEN]; |
| UINT8 *p = NULL; |
| #if SMP_DEBUG == TRUE |
| UINT8 *p_prnt = NULL; |
| #endif |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| |
| #if SMP_DEBUG == TRUE |
| p_prnt = u; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"U", BT_OCTET32_LEN); |
| p_prnt = v; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"V", BT_OCTET32_LEN); |
| p_prnt = x; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"X", BT_OCTET16_LEN); |
| p_prnt = &z; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"Z", 1); |
| #endif |
| |
| p = msg; |
| UINT8_TO_STREAM(p, z); |
| ARRAY_TO_STREAM(p, v, BT_OCTET32_LEN); |
| ARRAY_TO_STREAM(p, u, BT_OCTET32_LEN); |
| #if SMP_DEBUG == TRUE |
| p_prnt = msg; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"M", msg_len); |
| #endif |
| |
| p = key; |
| ARRAY_TO_STREAM(p, x, BT_OCTET16_LEN); |
| #if SMP_DEBUG == TRUE |
| p_prnt = key; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"K", BT_OCTET16_LEN); |
| #endif |
| |
| aes_cipher_msg_auth_code(key, msg, msg_len, BT_OCTET16_LEN, cmac); |
| #if SMP_DEBUG == TRUE |
| p_prnt = cmac; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"AES_CMAC", BT_OCTET16_LEN); |
| #endif |
| |
| p = c; |
| ARRAY_TO_STREAM(p, cmac, BT_OCTET16_LEN); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_numeric_comparison_display_number |
| ** |
| ** Description The function calculates and saves number to display in numeric |
| ** comparison association mode. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_calculate_numeric_comparison_display_number(tSMP_CB *p_cb, |
| tSMP_INT_DATA *p_data) |
| { |
| SMP_TRACE_DEBUG ("%s", __func__); |
| |
| if (p_cb->role == HCI_ROLE_MASTER) |
| { |
| p_cb->number_to_display = |
| smp_calculate_g2(p_cb->loc_publ_key.x, p_cb->peer_publ_key.x, p_cb->rand, |
| p_cb->rrand); |
| } |
| else |
| { |
| p_cb->number_to_display = |
| smp_calculate_g2(p_cb->peer_publ_key.x, p_cb->loc_publ_key.x, p_cb->rrand, |
| p_cb->rand); |
| } |
| |
| if (p_cb->number_to_display >= (BTM_MAX_PASSKEY_VAL + 1)) |
| { |
| UINT8 reason; |
| reason = p_cb->failure = SMP_PAIR_FAIL_UNKNOWN; |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason); |
| return; |
| } |
| |
| SMP_TRACE_EVENT("Number to display in numeric comparison = %d", p_cb->number_to_display); |
| p_cb->cb_evt = SMP_NC_REQ_EVT; |
| smp_sm_event(p_cb, SMP_SC_DSPL_NC_EVT, &p_cb->number_to_display); |
| return; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_g2 |
| ** |
| ** Description The function calculates |
| ** g2(U, V, X, Y) = AES-CMAC (U||V||Y) mod 2**32 mod 10**6 |
| ** X |
| ** and |
| ** Vres = g2(U, V, X, Y) mod 10**6 |
| ** where |
| ** input: U is 256 bit, |
| ** V is 256 bit, |
| ** X is 128 bit, |
| ** Y is 128 bit, |
| ** |
| ** Returns Vres. |
| ** Expected value has to be in the range [0 - 999999] i.e. [0 - 0xF423F]. |
| ** Vres = 1000000 means that the calculation fails. |
| ** |
| ** Note The LSB is the first octet, the MSB is the last octet of |
| ** the AES-CMAC input/output stream. |
| ** |
| *******************************************************************************/ |
| UINT32 smp_calculate_g2(UINT8 *u, UINT8 *v, UINT8 *x, UINT8 *y) |
| { |
| UINT8 msg_len = BT_OCTET32_LEN /* U size */ + BT_OCTET32_LEN /* V size */ |
| + BT_OCTET16_LEN /* Y size */; |
| UINT8 msg[BT_OCTET32_LEN + BT_OCTET32_LEN + BT_OCTET16_LEN]; |
| UINT8 key[BT_OCTET16_LEN]; |
| UINT8 cmac[BT_OCTET16_LEN]; |
| UINT8 *p = NULL; |
| UINT32 vres; |
| #if SMP_DEBUG == TRUE |
| UINT8 *p_prnt = NULL; |
| #endif |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| |
| p = msg; |
| ARRAY_TO_STREAM(p, y, BT_OCTET16_LEN); |
| ARRAY_TO_STREAM(p, v, BT_OCTET32_LEN); |
| ARRAY_TO_STREAM(p, u, BT_OCTET32_LEN); |
| #if SMP_DEBUG == TRUE |
| p_prnt = u; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"U", BT_OCTET32_LEN); |
| p_prnt = v; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"V", BT_OCTET32_LEN); |
| p_prnt = x; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"X", BT_OCTET16_LEN); |
| p_prnt = y; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"Y", BT_OCTET16_LEN); |
| #endif |
| |
| p = key; |
| ARRAY_TO_STREAM(p, x, BT_OCTET16_LEN); |
| #if SMP_DEBUG == TRUE |
| p_prnt = key; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"K", BT_OCTET16_LEN); |
| #endif |
| |
| if(!aes_cipher_msg_auth_code(key, msg, msg_len, BT_OCTET16_LEN, cmac)) |
| { |
| SMP_TRACE_ERROR("%s failed",__FUNCTION__); |
| return (BTM_MAX_PASSKEY_VAL + 1); |
| } |
| |
| #if SMP_DEBUG == TRUE |
| p_prnt = cmac; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"AES-CMAC", BT_OCTET16_LEN); |
| #endif |
| |
| /* vres = cmac mod 2**32 mod 10**6 */ |
| p = &cmac[0]; |
| STREAM_TO_UINT32(vres, p); |
| #if SMP_DEBUG == TRUE |
| p_prnt = (UINT8 *) &vres; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"cmac mod 2**32", 4); |
| #endif |
| |
| while (vres > BTM_MAX_PASSKEY_VAL) |
| vres -= (BTM_MAX_PASSKEY_VAL + 1); |
| #if SMP_DEBUG == TRUE |
| p_prnt = (UINT8 *) &vres; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"cmac mod 2**32 mod 10**6", 4); |
| #endif |
| |
| SMP_TRACE_ERROR("Value for numeric comparison = %d", vres); |
| return vres; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_f5 |
| ** |
| ** Description The function provides two AES-CMAC that are supposed to be used as |
| ** - MacKey (MacKey is used in pairing DHKey check calculation); |
| ** - LTK (LTK is used to ecrypt the link after completion of Phase 2 |
| ** and on reconnection, to derive BR/EDR LK). |
| ** The function inputs are W, N1, N2, A1, A2. |
| ** F5 rules: |
| ** - the value used as key in MacKey/LTK (T) is calculated |
| ** (function smp_calculate_f5_key(...)); |
| ** The formula is: |
| ** T = AES-CMAC (W) |
| ** salt |
| ** where salt is internal parameter of smp_calculate_f5_key(...). |
| ** - MacKey and LTK are calculated as AES-MAC values received with the |
| ** key T calculated in the previous step and the plaintext message |
| ** built from the external parameters N1, N2, A1, A2 and the internal |
| ** parameters counter, keyID, length. |
| ** The function smp_calculate_f5_mackey_or_long_term_key(...) is used in the |
| ** calculations. |
| ** The same formula is used in calculation of MacKey and LTK and the |
| ** same parameter values except the value of the internal parameter |
| ** counter: |
| ** - in MacKey calculations the value is 0; |
| ** - in LTK calculations the value is 1. |
| ** MacKey = AES-CMAC (Counter=0||keyID||N1||N2||A1||A2||Length=256) |
| ** T |
| ** LTK = AES-CMAC (Counter=1||keyID||N1||N2||A1||A2||Length=256) |
| ** T |
| ** The parameters are |
| ** input: |
| ** W is 256 bits, |
| ** N1 is 128 bits, |
| ** N2 is 128 bits, |
| ** A1 is 56 bit, |
| ** A2 is 56 bit. |
| ** internal: |
| ** Counter is 8 bits, its value is 0 for MacKey, |
| ** 1 for LTK; |
| ** KeyId is 32 bits, its value is |
| ** 0x62746c65 (MSB~LSB); |
| ** Length is 16 bits, its value is 0x0100 |
| ** (MSB~LSB). |
| ** output: |
| ** MacKey is 128 bits; |
| ** LTK is 128 bits |
| ** |
| ** Returns FALSE if out of resources, TRUE in other cases. |
| ** |
| ** Note The LSB is the first octet, the MSB is the last octet of |
| ** the AES-CMAC input/output stream. |
| ** |
| *******************************************************************************/ |
| BOOLEAN smp_calculate_f5(UINT8 *w, UINT8 *n1, UINT8 *n2, UINT8 *a1, UINT8 *a2, |
| UINT8 *mac_key, UINT8 *ltk) |
| { |
| BT_OCTET16 t; /* AES-CMAC output in smp_calculate_f5_key(...), key in */ |
| /* smp_calculate_f5_mackey_or_long_term_key(...) */ |
| #if SMP_DEBUG == TRUE |
| UINT8 *p_prnt = NULL; |
| #endif |
| /* internal parameters: */ |
| |
| /* |
| counter is 0 for MacKey, |
| is 1 for LTK |
| */ |
| UINT8 counter_mac_key[1] = {0}; |
| UINT8 counter_ltk[1] = {1}; |
| /* |
| keyID 62746c65 |
| */ |
| UINT8 key_id[4] = {0x65, 0x6c, 0x74, 0x62}; |
| /* |
| length 0100 |
| */ |
| UINT8 length[2] = {0x00, 0x01}; |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| #if SMP_DEBUG == TRUE |
| p_prnt = w; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"W", BT_OCTET32_LEN); |
| p_prnt = n1; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"N1", BT_OCTET16_LEN); |
| p_prnt = n2; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"N2", BT_OCTET16_LEN); |
| p_prnt = a1; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"A1", 7); |
| p_prnt = a2; |
| smp_debug_print_nbyte_little_endian (p_prnt,(const UINT8 *) "A2", 7); |
| #endif |
| |
| if (!smp_calculate_f5_key(w, t)) |
| { |
| SMP_TRACE_ERROR("%s failed to calc T",__FUNCTION__); |
| return FALSE; |
| } |
| #if SMP_DEBUG == TRUE |
| p_prnt = t; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"T", BT_OCTET16_LEN); |
| #endif |
| |
| if (!smp_calculate_f5_mackey_or_long_term_key(t, counter_mac_key, key_id, n1, n2, a1, a2, |
| length, mac_key)) |
| { |
| SMP_TRACE_ERROR("%s failed to calc MacKey", __FUNCTION__); |
| return FALSE; |
| } |
| #if SMP_DEBUG == TRUE |
| p_prnt = mac_key; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"MacKey", BT_OCTET16_LEN); |
| #endif |
| |
| if (!smp_calculate_f5_mackey_or_long_term_key(t, counter_ltk, key_id, n1, n2, a1, a2, |
| length, ltk)) |
| { |
| SMP_TRACE_ERROR("%s failed to calc LTK",__FUNCTION__); |
| return FALSE; |
| } |
| #if SMP_DEBUG == TRUE |
| p_prnt = ltk; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"LTK", BT_OCTET16_LEN); |
| #endif |
| |
| return TRUE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_f5_mackey_or_long_term_key |
| ** |
| ** Description The function calculates the value of MacKey or LTK by the rules |
| ** defined for f5 function. |
| ** At the moment exactly the same formula is used to calculate |
| ** LTK and MacKey. |
| ** The difference is the value of input parameter Counter: |
| ** - in MacKey calculations the value is 0; |
| ** - in LTK calculations the value is 1. |
| ** The formula: |
| ** mac = AES-CMAC (Counter||keyID||N1||N2||A1||A2||Length) |
| ** T |
| ** where |
| ** input: T is 256 bits; |
| ** Counter is 8 bits, its value is 0 for MacKey, |
| ** 1 for LTK; |
| ** keyID is 32 bits, its value is 0x62746c65; |
| ** N1 is 128 bits; |
| ** N2 is 128 bits; |
| ** A1 is 56 bits; |
| ** A2 is 56 bits; |
| ** Length is 16 bits, its value is 0x0100 |
| ** output: LTK is 128 bit. |
| ** |
| ** Returns FALSE if out of resources, TRUE in other cases. |
| ** |
| ** Note The LSB is the first octet, the MSB is the last octet of |
| ** the AES-CMAC input/output stream. |
| ** |
| *******************************************************************************/ |
| BOOLEAN smp_calculate_f5_mackey_or_long_term_key(UINT8 *t, UINT8 *counter, |
| UINT8 *key_id, UINT8 *n1, UINT8 *n2, UINT8 *a1, UINT8 *a2, |
| UINT8 *length, UINT8 *mac) |
| { |
| UINT8 *p = NULL; |
| UINT8 cmac[BT_OCTET16_LEN]; |
| UINT8 key[BT_OCTET16_LEN]; |
| UINT8 msg_len = 1 /* Counter size */ + 4 /* keyID size */ + |
| BT_OCTET16_LEN /* N1 size */ + BT_OCTET16_LEN /* N2 size */ + |
| 7 /* A1 size*/ + 7 /* A2 size*/ + 2 /* Length size */; |
| UINT8 msg[1 + 4 + BT_OCTET16_LEN + BT_OCTET16_LEN + 7 + 7 + 2]; |
| BOOLEAN ret = TRUE; |
| #if SMP_DEBUG == TRUE |
| UINT8 *p_prnt = NULL; |
| #endif |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| #if SMP_DEBUG == TRUE |
| p_prnt = t; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"T", BT_OCTET16_LEN); |
| p_prnt = counter; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"Counter", 1); |
| p_prnt = key_id; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"KeyID", 4); |
| p_prnt = n1; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"N1", BT_OCTET16_LEN); |
| p_prnt = n2; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"N2", BT_OCTET16_LEN); |
| p_prnt = a1; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"A1", 7); |
| p_prnt = a2; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"A2", 7); |
| p_prnt = length; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"Length", 2); |
| #endif |
| |
| p = key; |
| ARRAY_TO_STREAM(p, t, BT_OCTET16_LEN); |
| #if SMP_DEBUG == TRUE |
| p_prnt = key; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"K", BT_OCTET16_LEN); |
| #endif |
| p = msg; |
| ARRAY_TO_STREAM(p, length, 2); |
| ARRAY_TO_STREAM(p, a2, 7); |
| ARRAY_TO_STREAM(p, a1, 7); |
| ARRAY_TO_STREAM(p, n2, BT_OCTET16_LEN); |
| ARRAY_TO_STREAM(p, n1, BT_OCTET16_LEN); |
| ARRAY_TO_STREAM(p, key_id, 4); |
| ARRAY_TO_STREAM(p, counter, 1); |
| #if SMP_DEBUG == TRUE |
| p_prnt = msg; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"M", msg_len); |
| #endif |
| |
| if (!aes_cipher_msg_auth_code(key, msg, msg_len, BT_OCTET16_LEN, cmac)) |
| { |
| SMP_TRACE_ERROR("%s failed", __FUNCTION__); |
| ret = FALSE; |
| } |
| |
| #if SMP_DEBUG == TRUE |
| p_prnt = cmac; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"AES-CMAC", BT_OCTET16_LEN); |
| #endif |
| |
| p = mac; |
| ARRAY_TO_STREAM(p, cmac, BT_OCTET16_LEN); |
| return ret; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_f5_key |
| ** |
| ** Description The function calculates key T used in calculation of |
| ** MacKey and LTK (f5 output is defined as MacKey || LTK). |
| ** T = AES-CMAC (W) |
| ** salt |
| ** where |
| ** Internal: salt is 128 bit. |
| ** input: W is 256 bit. |
| ** Output: T is 128 bit. |
| ** |
| ** Returns FALSE if out of resources, TRUE in other cases. |
| ** |
| ** Note The LSB is the first octet, the MSB is the last octet of |
| ** the AES-CMAC input/output stream. |
| ** |
| *******************************************************************************/ |
| BOOLEAN smp_calculate_f5_key(UINT8 *w, UINT8 *t) |
| { |
| UINT8 *p = NULL; |
| /* Please see 2.2.7 LE Secure Connections Key Generation Function f5 */ |
| /* |
| salt: 6C88 8391 AAF5 A538 6037 0BDB 5A60 83BE |
| */ |
| BT_OCTET16 salt = { |
| 0xBE, 0x83, 0x60, 0x5A, 0xDB, 0x0B, 0x37, 0x60, |
| 0x38, 0xA5, 0xF5, 0xAA, 0x91, 0x83, 0x88, 0x6C |
| }; |
| #if SMP_DEBUG == TRUE |
| UINT8 *p_prnt = NULL; |
| #endif |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| #if SMP_DEBUG == TRUE |
| p_prnt = salt; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"salt", BT_OCTET16_LEN); |
| p_prnt = w; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"W", BT_OCTET32_LEN); |
| #endif |
| |
| BT_OCTET16 key; |
| BT_OCTET32 msg; |
| |
| p = key; |
| ARRAY_TO_STREAM(p, salt, BT_OCTET16_LEN); |
| p = msg; |
| ARRAY_TO_STREAM(p, w, BT_OCTET32_LEN); |
| #if SMP_DEBUG == TRUE |
| p_prnt = key; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"K", BT_OCTET16_LEN); |
| p_prnt = msg; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"M", BT_OCTET32_LEN); |
| #endif |
| |
| BT_OCTET16 cmac; |
| BOOLEAN ret = TRUE; |
| if (!aes_cipher_msg_auth_code(key, msg, BT_OCTET32_LEN, BT_OCTET16_LEN, cmac)) |
| { |
| SMP_TRACE_ERROR("%s failed", __FUNCTION__); |
| ret = FALSE; |
| } |
| |
| #if SMP_DEBUG == TRUE |
| p_prnt = cmac; |
| smp_debug_print_nbyte_little_endian (p_prnt, (const UINT8 *)"AES-CMAC", BT_OCTET16_LEN); |
| #endif |
| |
| p = t; |
| ARRAY_TO_STREAM(p, cmac, BT_OCTET16_LEN); |
| return ret; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_local_dhkey_check |
| ** |
| ** Description The function calculates and saves local device DHKey check |
| ** value in CB. |
| ** Before doing this it calls smp_calculate_f5_mackey_and_long_term_key(...). |
| ** to calculate MacKey and LTK. |
| ** MacKey is used in dhkey calculation. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_calculate_local_dhkey_check(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UINT8 iocap[3], a[7], b[7]; |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| |
| smp_calculate_f5_mackey_and_long_term_key(p_cb); |
| |
| smp_collect_local_io_capabilities(iocap, p_cb); |
| |
| smp_collect_local_ble_address(a, p_cb); |
| smp_collect_peer_ble_address(b, p_cb); |
| smp_calculate_f6(p_cb->mac_key, p_cb->rand, p_cb->rrand, p_cb->peer_random, iocap, a, b, |
| p_cb->dhkey_check); |
| |
| SMP_TRACE_EVENT ("local DHKey check calculation is completed"); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_peer_dhkey_check |
| ** |
| ** Description The function calculates peer device DHKey check value. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_calculate_peer_dhkey_check(tSMP_CB *p_cb, tSMP_INT_DATA *p_data) |
| { |
| UINT8 iocap[3], a[7], b[7]; |
| BT_OCTET16 param_buf; |
| BOOLEAN ret; |
| tSMP_KEY key; |
| tSMP_STATUS status = SMP_PAIR_FAIL_UNKNOWN; |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| |
| smp_collect_peer_io_capabilities(iocap, p_cb); |
| |
| smp_collect_local_ble_address(a, p_cb); |
| smp_collect_peer_ble_address(b, p_cb); |
| ret = smp_calculate_f6(p_cb->mac_key, p_cb->rrand, p_cb->rand, p_cb->local_random, iocap, |
| b, a, param_buf); |
| |
| if (ret) |
| { |
| SMP_TRACE_EVENT ("peer DHKey check calculation is completed"); |
| #if (SMP_DEBUG == TRUE) |
| smp_debug_print_nbyte_little_endian (param_buf, (const UINT8 *)"peer DHKey check", |
| BT_OCTET16_LEN); |
| #endif |
| key.key_type = SMP_KEY_TYPE_PEER_DHK_CHCK; |
| key.p_data = param_buf; |
| smp_sm_event(p_cb, SMP_SC_KEY_READY_EVT, &key); |
| } |
| else |
| { |
| SMP_TRACE_EVENT ("peer DHKey check calculation failed"); |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_f6 |
| ** |
| ** Description The function calculates |
| ** C = f6(W, N1, N2, R, IOcap, A1, A2) = AES-CMAC (N1||N2||R||IOcap||A1||A2) |
| ** W |
| ** where |
| ** input: W is 128 bit, |
| ** N1 is 128 bit, |
| ** N2 is 128 bit, |
| ** R is 128 bit, |
| ** IOcap is 24 bit, |
| ** A1 is 56 bit, |
| ** A2 is 56 bit, |
| ** output: C is 128 bit. |
| ** |
| ** Returns FALSE if out of resources, TRUE in other cases. |
| ** |
| ** Note The LSB is the first octet, the MSB is the last octet of |
| ** the AES-CMAC input/output stream. |
| ** |
| *******************************************************************************/ |
| BOOLEAN smp_calculate_f6(UINT8 *w, UINT8 *n1, UINT8 *n2, UINT8 *r, UINT8 *iocap, UINT8 *a1, |
| UINT8 *a2, UINT8 *c) |
| { |
| UINT8 *p = NULL; |
| UINT8 msg_len = BT_OCTET16_LEN /* N1 size */ + BT_OCTET16_LEN /* N2 size */ + |
| BT_OCTET16_LEN /* R size */ + 3 /* IOcap size */ + 7 /* A1 size*/ |
| + 7 /* A2 size*/; |
| UINT8 msg[BT_OCTET16_LEN + BT_OCTET16_LEN + BT_OCTET16_LEN + 3 + 7 + 7]; |
| #if SMP_DEBUG == TRUE |
| UINT8 *p_print = NULL; |
| #endif |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| #if SMP_DEBUG == TRUE |
| p_print = w; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"W", BT_OCTET16_LEN); |
| p_print = n1; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"N1", BT_OCTET16_LEN); |
| p_print = n2; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"N2", BT_OCTET16_LEN); |
| p_print = r; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"R", BT_OCTET16_LEN); |
| p_print = iocap; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"IOcap", 3); |
| p_print = a1; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"A1", 7); |
| p_print = a2; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"A2", 7); |
| #endif |
| |
| UINT8 cmac[BT_OCTET16_LEN]; |
| UINT8 key[BT_OCTET16_LEN]; |
| |
| p = key; |
| ARRAY_TO_STREAM(p, w, BT_OCTET16_LEN); |
| #if SMP_DEBUG == TRUE |
| p_print = key; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"K", BT_OCTET16_LEN); |
| #endif |
| |
| p = msg; |
| ARRAY_TO_STREAM(p, a2, 7); |
| ARRAY_TO_STREAM(p, a1, 7); |
| ARRAY_TO_STREAM(p, iocap, 3); |
| ARRAY_TO_STREAM(p, r, BT_OCTET16_LEN); |
| ARRAY_TO_STREAM(p, n2, BT_OCTET16_LEN); |
| ARRAY_TO_STREAM(p, n1, BT_OCTET16_LEN); |
| #if SMP_DEBUG == TRUE |
| p_print = msg; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"M", msg_len); |
| #endif |
| |
| BOOLEAN ret = TRUE; |
| if(!aes_cipher_msg_auth_code(key, msg, msg_len, BT_OCTET16_LEN, cmac)) |
| { |
| SMP_TRACE_ERROR("%s failed", __FUNCTION__); |
| ret = FALSE; |
| } |
| |
| #if SMP_DEBUG == TRUE |
| p_print = cmac; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"AES-CMAC", BT_OCTET16_LEN); |
| #endif |
| |
| p = c; |
| ARRAY_TO_STREAM(p, cmac, BT_OCTET16_LEN); |
| return ret; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_link_key_from_long_term_key |
| ** |
| ** Description The function calculates and saves BR/EDR link key derived from |
| ** LE SC LTK. |
| ** |
| ** Returns FALSE if out of resources, TRUE in other cases. |
| ** |
| *******************************************************************************/ |
| BOOLEAN smp_calculate_link_key_from_long_term_key(tSMP_CB *p_cb) |
| { |
| tBTM_SEC_DEV_REC *p_dev_rec; |
| BD_ADDR bda_for_lk; |
| tBLE_ADDR_TYPE conn_addr_type; |
| |
| SMP_TRACE_DEBUG ("%s", __func__); |
| |
| if (p_cb->id_addr_rcvd && p_cb->id_addr_type == BLE_ADDR_PUBLIC) |
| { |
| SMP_TRACE_DEBUG ("Use rcvd identity address as BD_ADDR of LK rcvd identity address"); |
| memcpy(bda_for_lk, p_cb->id_addr, BD_ADDR_LEN); |
| } |
| else if ((BTM_ReadRemoteConnectionAddr(p_cb->pairing_bda, bda_for_lk, &conn_addr_type)) && |
| conn_addr_type == BLE_ADDR_PUBLIC) |
| { |
| SMP_TRACE_DEBUG ("Use rcvd connection address as BD_ADDR of LK"); |
| } |
| else |
| { |
| SMP_TRACE_WARNING ("Don't have peer public address to associate with LK"); |
| return FALSE; |
| } |
| |
| if ((p_dev_rec = btm_find_dev (p_cb->pairing_bda)) == NULL) |
| { |
| SMP_TRACE_ERROR("%s failed to find Security Record", __func__); |
| return FALSE; |
| } |
| |
| BT_OCTET16 intermediate_link_key; |
| BOOLEAN ret = TRUE; |
| |
| ret = smp_calculate_h6(p_cb->ltk, (UINT8 *)"1pmt" /* reversed "tmp1" */,intermediate_link_key); |
| if (!ret) |
| { |
| SMP_TRACE_ERROR("%s failed to derive intermediate_link_key", __func__); |
| return ret; |
| } |
| |
| BT_OCTET16 link_key; |
| ret = smp_calculate_h6(intermediate_link_key, (UINT8 *) "rbel" /* reversed "lebr" */, link_key); |
| if (!ret) |
| { |
| SMP_TRACE_ERROR("%s failed", __func__); |
| } |
| else |
| { |
| UINT8 link_key_type; |
| if (btm_cb.security_mode == BTM_SEC_MODE_SC) |
| { |
| /* Secure Connections Only Mode */ |
| link_key_type = BTM_LKEY_TYPE_AUTH_COMB_P_256; |
| } |
| else if (controller_get_interface()->supports_secure_connections()) |
| { |
| /* both transports are SC capable */ |
| if (p_cb->sec_level == SMP_SEC_AUTHENTICATED) |
| link_key_type = BTM_LKEY_TYPE_AUTH_COMB_P_256; |
| else |
| link_key_type = BTM_LKEY_TYPE_UNAUTH_COMB_P_256; |
| } |
| else if (btm_cb.security_mode == BTM_SEC_MODE_SP) |
| { |
| /* BR/EDR transport is SSP capable */ |
| if (p_cb->sec_level == SMP_SEC_AUTHENTICATED) |
| link_key_type = BTM_LKEY_TYPE_AUTH_COMB; |
| else |
| link_key_type = BTM_LKEY_TYPE_UNAUTH_COMB; |
| } |
| else |
| { |
| SMP_TRACE_ERROR ("%s failed to update link_key. Sec Mode = %d, sm4 = 0x%02x", |
| __func__, btm_cb.security_mode, p_dev_rec->sm4); |
| return FALSE; |
| } |
| |
| link_key_type += BTM_LTK_DERIVED_LKEY_OFFSET; |
| |
| UINT8 *p; |
| BT_OCTET16 notif_link_key; |
| p = notif_link_key; |
| ARRAY16_TO_STREAM(p, link_key); |
| |
| btm_sec_link_key_notification (bda_for_lk, notif_link_key, link_key_type); |
| |
| SMP_TRACE_EVENT ("%s is completed", __func__); |
| } |
| |
| return ret; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_long_term_key_from_link_key |
| ** |
| ** Description The function calculates and saves SC LTK derived from BR/EDR |
| ** link key. |
| ** |
| ** Returns FALSE if out of resources, TRUE in other cases. |
| ** |
| *******************************************************************************/ |
| BOOLEAN smp_calculate_long_term_key_from_link_key(tSMP_CB *p_cb) |
| { |
| BOOLEAN ret = TRUE; |
| tBTM_SEC_DEV_REC *p_dev_rec; |
| UINT8 rev_link_key[16]; |
| |
| SMP_TRACE_DEBUG ("%s", __FUNCTION__); |
| |
| if ((p_dev_rec = btm_find_dev (p_cb->pairing_bda)) == NULL) |
| { |
| SMP_TRACE_ERROR("%s failed to find Security Record",__FUNCTION__); |
| return FALSE; |
| } |
| |
| UINT8 br_link_key_type; |
| if ((br_link_key_type = BTM_SecGetDeviceLinkKeyType (p_cb->pairing_bda)) |
| == BTM_LKEY_TYPE_IGNORE) |
| { |
| SMP_TRACE_ERROR("%s failed to retrieve BR link type",__FUNCTION__); |
| return FALSE; |
| } |
| |
| if ((br_link_key_type != BTM_LKEY_TYPE_AUTH_COMB_P_256) && |
| (br_link_key_type != BTM_LKEY_TYPE_UNAUTH_COMB_P_256)) |
| { |
| SMP_TRACE_ERROR("%s LE SC LTK can't be derived from LK %d", |
| __FUNCTION__, br_link_key_type); |
| return FALSE; |
| } |
| |
| UINT8 *p1; |
| UINT8 *p2; |
| p1 = rev_link_key; |
| p2 = p_dev_rec->link_key; |
| REVERSE_ARRAY_TO_STREAM(p1, p2, 16); |
| |
| BT_OCTET16 intermediate_long_term_key; |
| /* "tmp2" obtained from the spec */ |
| ret = smp_calculate_h6(rev_link_key, (UINT8 *) "2pmt" /* reversed "tmp2" */, |
| intermediate_long_term_key); |
| |
| if (!ret) |
| { |
| SMP_TRACE_ERROR("%s failed to derive intermediate_long_term_key",__FUNCTION__); |
| return ret; |
| } |
| |
| /* "brle" obtained from the spec */ |
| ret = smp_calculate_h6(intermediate_long_term_key, (UINT8 *) "elrb" /* reversed "brle" */, |
| p_cb->ltk); |
| |
| if (!ret) |
| { |
| SMP_TRACE_ERROR("%s failed",__FUNCTION__); |
| } |
| else |
| { |
| p_cb->sec_level = (br_link_key_type == BTM_LKEY_TYPE_AUTH_COMB_P_256) |
| ? SMP_SEC_AUTHENTICATED : SMP_SEC_UNAUTHENTICATE; |
| SMP_TRACE_EVENT ("%s is completed",__FUNCTION__); |
| } |
| |
| return ret; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_calculate_h6 |
| ** |
| ** Description The function calculates |
| ** C = h6(W, KeyID) = AES-CMAC (KeyID) |
| ** W |
| ** where |
| ** input: W is 128 bit, |
| ** KeyId is 32 bit, |
| ** output: C is 128 bit. |
| ** |
| ** Returns FALSE if out of resources, TRUE in other cases. |
| ** |
| ** Note The LSB is the first octet, the MSB is the last octet of |
| ** the AES-CMAC input/output stream. |
| ** |
| *******************************************************************************/ |
| BOOLEAN smp_calculate_h6(UINT8 *w, UINT8 *keyid, UINT8 *c) |
| { |
| #if SMP_DEBUG == TRUE |
| UINT8 *p_print = NULL; |
| #endif |
| |
| SMP_TRACE_DEBUG ("%s",__FUNCTION__); |
| #if SMP_DEBUG == TRUE |
| p_print = w; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"W", BT_OCTET16_LEN); |
| p_print = keyid; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"keyID", 4); |
| #endif |
| |
| UINT8 *p = NULL; |
| UINT8 key[BT_OCTET16_LEN]; |
| |
| p = key; |
| ARRAY_TO_STREAM(p, w, BT_OCTET16_LEN); |
| |
| #if SMP_DEBUG == TRUE |
| p_print = key; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"K", BT_OCTET16_LEN); |
| #endif |
| |
| UINT8 msg_len = 4 /* KeyID size */; |
| UINT8 msg[4]; |
| |
| p = msg; |
| ARRAY_TO_STREAM(p, keyid, 4); |
| |
| #if SMP_DEBUG == TRUE |
| p_print = msg; |
| smp_debug_print_nbyte_little_endian (p_print,(const UINT8 *) "M", msg_len); |
| #endif |
| |
| BOOLEAN ret = TRUE; |
| UINT8 cmac[BT_OCTET16_LEN]; |
| if (!aes_cipher_msg_auth_code(key, msg, msg_len, BT_OCTET16_LEN, cmac)) |
| { |
| SMP_TRACE_ERROR("%s failed",__FUNCTION__); |
| ret = FALSE; |
| } |
| |
| #if SMP_DEBUG == TRUE |
| p_print = cmac; |
| smp_debug_print_nbyte_little_endian (p_print, (const UINT8 *)"AES-CMAC", BT_OCTET16_LEN); |
| #endif |
| |
| p = c; |
| ARRAY_TO_STREAM(p, cmac, BT_OCTET16_LEN); |
| return ret; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_start_nonce_generation |
| ** |
| ** Description This function starts nonce generation. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_start_nonce_generation(tSMP_CB *p_cb) |
| { |
| SMP_TRACE_DEBUG("%s", __FUNCTION__); |
| p_cb->rand_enc_proc_state = SMP_GEN_NONCE_0_7; |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_finish_nonce_generation |
| ** |
| ** Description This function finishes nonce generation. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_finish_nonce_generation(tSMP_CB *p_cb) |
| { |
| SMP_TRACE_DEBUG("%s", __FUNCTION__); |
| p_cb->rand_enc_proc_state = SMP_GEN_NONCE_8_15; |
| if (!btsnd_hcic_ble_rand((void *)smp_rand_back)) |
| smp_rand_back(NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_process_new_nonce |
| ** |
| ** Description This function notifies SM that it has new nonce. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void smp_process_new_nonce(tSMP_CB *p_cb) |
| { |
| SMP_TRACE_DEBUG ("%s round %d", __FUNCTION__, p_cb->round); |
| smp_sm_event(p_cb, SMP_HAVE_LOC_NONCE_EVT, NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function smp_rand_back |
| ** |
| ** Description This function is to process the rand command finished, |
| ** process the random/encrypted number for further action. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void smp_rand_back(tBTM_RAND_ENC *p) |
| { |
| tSMP_CB *p_cb = &smp_cb; |
| UINT8 *pp = p->param_buf; |
| UINT8 failure = SMP_PAIR_FAIL_UNKNOWN; |
| UINT8 state = p_cb->rand_enc_proc_state & ~0x80; |
| |
| SMP_TRACE_DEBUG ("%s state=0x%x", __FUNCTION__, state); |
| if (p && p->status == HCI_SUCCESS) |
| { |
| switch (state) |
| { |
| case SMP_GEN_SRAND_MRAND: |
| memcpy((void *)p_cb->rand, p->param_buf, p->param_len); |
| smp_generate_rand_cont(p_cb, NULL); |
| break; |
| |
| case SMP_GEN_SRAND_MRAND_CONT: |
| memcpy((void *)&p_cb->rand[8], p->param_buf, p->param_len); |
| smp_generate_confirm(p_cb, NULL); |
| break; |
| |
| case SMP_GEN_DIV_LTK: |
| STREAM_TO_UINT16(p_cb->div, pp); |
| smp_generate_ltk_cont(p_cb, NULL); |
| break; |
| |
| case SMP_GEN_DIV_CSRK: |
| STREAM_TO_UINT16(p_cb->div, pp); |
| smp_compute_csrk(p_cb, NULL); |
| break; |
| |
| case SMP_GEN_TK: |
| smp_proc_passkey(p_cb, p); |
| break; |
| |
| case SMP_GEN_RAND_V: |
| memcpy(p_cb->enc_rand, p->param_buf, BT_OCTET8_LEN); |
| smp_generate_y(p_cb, NULL); |
| break; |
| |
| case SMP_GENERATE_PRIVATE_KEY_0_7: |
| case SMP_GENERATE_PRIVATE_KEY_8_15: |
| case SMP_GENERATE_PRIVATE_KEY_16_23: |
| case SMP_GENERATE_PRIVATE_KEY_24_31: |
| smp_continue_private_key_creation(p_cb, p); |
| break; |
| |
| case SMP_GEN_NONCE_0_7: |
| memcpy((void *)p_cb->rand, p->param_buf, p->param_len); |
| smp_finish_nonce_generation(p_cb); |
| break; |
| |
| case SMP_GEN_NONCE_8_15: |
| memcpy((void *)&p_cb->rand[8], p->param_buf, p->param_len); |
| smp_process_new_nonce(p_cb); |
| break; |
| } |
| |
| return; |
| } |
| |
| SMP_TRACE_ERROR("%s key generation failed: (%d)", __FUNCTION__, p_cb->rand_enc_proc_state); |
| smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &failure); |
| } |
| |
| #endif |
| |