| /****************************************************************************** |
| * |
| * Copyright 2003-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains action functions for the audio gateway. |
| * |
| ******************************************************************************/ |
| |
| #include <cstring> |
| |
| #include "bta_ag_api.h" |
| #include "bta_ag_int.h" |
| #include "bta_api.h" |
| #include "bta_dm_api.h" |
| #include "bta_sys.h" |
| #include "l2c_api.h" |
| #include "osi/include/osi.h" |
| #include "port_api.h" |
| #include "utl.h" |
| |
| /***************************************************************************** |
| * Constants |
| ****************************************************************************/ |
| |
| /* maximum length of data to read from RFCOMM */ |
| #define BTA_AG_RFC_READ_MAX 512 |
| |
| /* maximum AT command length */ |
| #define BTA_AG_CMD_MAX 512 |
| |
| const uint16_t bta_ag_uuid[BTA_AG_NUM_IDX] = { |
| UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY, UUID_SERVCLASS_AG_HANDSFREE}; |
| |
| const uint8_t bta_ag_sec_id[BTA_AG_NUM_IDX] = {BTM_SEC_SERVICE_HEADSET_AG, |
| BTM_SEC_SERVICE_AG_HANDSFREE}; |
| |
| const tBTA_SERVICE_ID bta_ag_svc_id[BTA_AG_NUM_IDX] = {BTA_HSP_SERVICE_ID, |
| BTA_HFP_SERVICE_ID}; |
| |
| const tBTA_SERVICE_MASK bta_ag_svc_mask[BTA_AG_NUM_IDX] = { |
| BTA_HSP_SERVICE_MASK, BTA_HFP_SERVICE_MASK}; |
| |
| typedef void (*tBTA_AG_ATCMD_CBACK)(tBTA_AG_SCB* p_scb, uint16_t cmd, |
| uint8_t arg_type, char* p_arg, |
| int16_t int_arg); |
| |
| const tBTA_AG_ATCMD_CBACK bta_ag_at_cback_tbl[BTA_AG_NUM_IDX] = { |
| bta_ag_at_hsp_cback, bta_ag_at_hfp_cback}; |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_cback_open |
| * |
| * Description Send open callback event to application. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_ag_cback_open(tBTA_AG_SCB* p_scb, const RawAddress& bd_addr, |
| tBTA_AG_STATUS status) { |
| tBTA_AG_OPEN open = {}; |
| |
| /* call app callback with open event */ |
| open.hdr.handle = bta_ag_scb_to_idx(p_scb); |
| open.hdr.app_id = p_scb->app_id; |
| open.status = status; |
| open.service_id = bta_ag_svc_id[p_scb->conn_service]; |
| open.bd_addr = bd_addr; |
| |
| (*bta_ag_cb.p_cback)(BTA_AG_OPEN_EVT, (tBTA_AG*)&open); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_register |
| * |
| * Description This function initializes values of the AG cb and sets up |
| * the SDP record for the services. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_register(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| /* initialize control block */ |
| p_scb->reg_services = data.api_register.services; |
| p_scb->serv_sec_mask = data.api_register.sec_mask; |
| p_scb->features = data.api_register.features; |
| p_scb->app_id = data.api_register.app_id; |
| |
| /* create SDP records */ |
| bta_ag_create_records(p_scb, data); |
| |
| /* start RFCOMM servers */ |
| bta_ag_start_servers(p_scb, p_scb->reg_services); |
| |
| /* call app callback with register event */ |
| tBTA_AG_REGISTER reg = {}; |
| reg.hdr.handle = bta_ag_scb_to_idx(p_scb); |
| reg.hdr.app_id = p_scb->app_id; |
| reg.status = BTA_AG_SUCCESS; |
| (*bta_ag_cb.p_cback)(BTA_AG_REGISTER_EVT, (tBTA_AG*)®); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_deregister |
| * |
| * Description This function removes the sdp records, closes the RFCOMM |
| * servers, and deallocates the service control block. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_deregister(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| /* set dealloc */ |
| p_scb->dealloc = true; |
| |
| /* remove sdp records */ |
| bta_ag_del_records(p_scb); |
| |
| /* remove rfcomm servers */ |
| bta_ag_close_servers(p_scb, p_scb->reg_services); |
| |
| /* dealloc */ |
| bta_ag_scb_dealloc(p_scb); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_start_dereg |
| * |
| * Description Start a deregister event. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_start_dereg(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| /* set dealloc */ |
| p_scb->dealloc = true; |
| |
| /* remove sdp records */ |
| bta_ag_del_records(p_scb); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_start_open |
| * |
| * Description This starts an AG open. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_start_open(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| RawAddress pending_bd_addr = {}; |
| |
| /* store parameters */ |
| if (!data.IsEmpty()) { |
| p_scb->peer_addr = data.api_open.bd_addr; |
| p_scb->open_services = data.api_open.services; |
| p_scb->cli_sec_mask = data.api_open.sec_mask; |
| } |
| |
| /* Check if RFCOMM has any incoming connection to avoid collision. */ |
| if (PORT_IsOpening(pending_bd_addr)) { |
| /* Let the incoming connection goes through. */ |
| /* Issue collision for this scb for now. */ |
| /* We will decide what to do when we find incoming connetion later. */ |
| bta_ag_collision_cback(0, BTA_ID_AG, 0, p_scb->peer_addr); |
| return; |
| } |
| |
| /* close servers */ |
| bta_ag_close_servers(p_scb, p_scb->reg_services); |
| |
| /* set role */ |
| p_scb->role = BTA_AG_INT; |
| |
| /* do service search */ |
| bta_ag_do_disc(p_scb, p_scb->open_services); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_disc_int_res |
| * |
| * Description This function handles a discovery result when initiator. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_disc_int_res(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| uint16_t event = BTA_AG_DISC_FAIL_EVT; |
| |
| APPL_TRACE_DEBUG("bta_ag_disc_int_res: Status: %d", data.disc_result.status); |
| |
| /* if found service */ |
| if (data.disc_result.status == SDP_SUCCESS || |
| data.disc_result.status == SDP_DB_FULL) { |
| /* get attributes */ |
| if (bta_ag_sdp_find_attr(p_scb, p_scb->open_services)) { |
| /* set connected service */ |
| p_scb->conn_service = bta_ag_service_to_idx(p_scb->open_services); |
| |
| /* send ourselves sdp ok event */ |
| event = BTA_AG_DISC_OK_EVT; |
| } |
| } |
| |
| /* free discovery db */ |
| bta_ag_free_db(p_scb, data); |
| |
| /* if service not found check if we should search for other service */ |
| if ((event == BTA_AG_DISC_FAIL_EVT) && |
| (data.disc_result.status == SDP_SUCCESS || |
| data.disc_result.status == SDP_DB_FULL || |
| data.disc_result.status == SDP_NO_RECS_MATCH)) { |
| if ((p_scb->open_services & BTA_HFP_SERVICE_MASK) && |
| (p_scb->open_services & BTA_HSP_SERVICE_MASK)) { |
| /* search for HSP */ |
| p_scb->open_services &= ~BTA_HFP_SERVICE_MASK; |
| bta_ag_do_disc(p_scb, p_scb->open_services); |
| } else if ((p_scb->open_services & BTA_HSP_SERVICE_MASK) && |
| (p_scb->hsp_version == HSP_VERSION_1_2)) { |
| /* search for UUID_SERVCLASS_HEADSET instead */ |
| p_scb->hsp_version = HSP_VERSION_1_0; |
| bta_ag_do_disc(p_scb, p_scb->open_services); |
| } else { |
| /* send ourselves sdp ok/fail event */ |
| bta_ag_sm_execute(p_scb, event, data); |
| } |
| } else { |
| /* send ourselves sdp ok/fail event */ |
| bta_ag_sm_execute(p_scb, event, data); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_disc_acp_res |
| * |
| * Description This function handles a discovery result when acceptor. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_disc_acp_res(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| /* if found service */ |
| if (data.disc_result.status == SDP_SUCCESS || |
| data.disc_result.status == SDP_DB_FULL) { |
| /* get attributes */ |
| bta_ag_sdp_find_attr(p_scb, bta_ag_svc_mask[p_scb->conn_service]); |
| } |
| |
| /* free discovery db */ |
| bta_ag_free_db(p_scb, data); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_disc_fail |
| * |
| * Description This function handles a discovery failure. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_disc_fail(tBTA_AG_SCB* p_scb, |
| UNUSED_ATTR const tBTA_AG_DATA& data) { |
| /* reopen registered servers */ |
| bta_ag_start_servers(p_scb, p_scb->reg_services); |
| |
| /* reinitialize stuff */ |
| |
| /* clear the remote BD address */ |
| p_scb->peer_addr = RawAddress::kEmpty; |
| |
| /* call open cback w. failure */ |
| bta_ag_cback_open(p_scb, RawAddress::kEmpty, BTA_AG_FAIL_SDP); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_open_fail |
| * |
| * Description open connection failed. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_open_fail(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| /* call open cback w. failure */ |
| bta_ag_cback_open(p_scb, data.api_open.bd_addr, BTA_AG_FAIL_RESOURCES); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_rfc_fail |
| * |
| * Description RFCOMM connection failed. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_rfc_fail(tBTA_AG_SCB* p_scb, UNUSED_ATTR const tBTA_AG_DATA& data) { |
| /* reinitialize stuff */ |
| p_scb->conn_handle = 0; |
| p_scb->conn_service = 0; |
| p_scb->peer_features = 0; |
| p_scb->peer_codecs = BTA_AG_CODEC_CVSD; |
| p_scb->sco_codec = BTA_AG_CODEC_CVSD; |
| p_scb->role = 0; |
| p_scb->svc_conn = false; |
| p_scb->hsp_version = HSP_VERSION_1_2; |
| /*Clear the BD address*/ |
| p_scb->peer_addr = RawAddress::kEmpty; |
| |
| /* reopen registered servers */ |
| bta_ag_start_servers(p_scb, p_scb->reg_services); |
| |
| /* call open cback w. failure */ |
| bta_ag_cback_open(p_scb, RawAddress::kEmpty, BTA_AG_FAIL_RFCOMM); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_rfc_close |
| * |
| * Description RFCOMM connection closed. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_rfc_close(tBTA_AG_SCB* p_scb, |
| UNUSED_ATTR const tBTA_AG_DATA& data) { |
| tBTA_AG_CLOSE close = {}; |
| tBTA_SERVICE_MASK services; |
| int i, num_active_conn = 0; |
| |
| /* reinitialize stuff */ |
| p_scb->conn_service = 0; |
| p_scb->peer_features = 0; |
| p_scb->peer_codecs = BTA_AG_CODEC_CVSD; |
| p_scb->sco_codec = BTA_AG_CODEC_CVSD; |
| /* Clear these flags upon SLC teardown */ |
| p_scb->codec_updated = false; |
| p_scb->codec_fallback = false; |
| p_scb->codec_msbc_settings = BTA_AG_SCO_MSBC_SETTINGS_T2; |
| p_scb->role = 0; |
| p_scb->post_sco = BTA_AG_POST_SCO_NONE; |
| p_scb->svc_conn = false; |
| p_scb->hsp_version = HSP_VERSION_1_2; |
| bta_ag_at_reinit(&p_scb->at_cb); |
| |
| for (auto& peer_hf_indicator : p_scb->peer_hf_indicators) { |
| peer_hf_indicator = {}; |
| } |
| for (auto& local_hf_indicator : p_scb->local_hf_indicators) { |
| local_hf_indicator = {}; |
| } |
| |
| /* stop timers */ |
| alarm_cancel(p_scb->ring_timer); |
| alarm_cancel(p_scb->codec_negotiation_timer); |
| |
| close.hdr.handle = bta_ag_scb_to_idx(p_scb); |
| close.hdr.app_id = p_scb->app_id; |
| close.bd_addr = p_scb->peer_addr; |
| |
| bta_sys_conn_close(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| |
| if (bta_ag_get_active_device() == p_scb->peer_addr) { |
| bta_clear_active_device(); |
| } |
| |
| /* call close cback */ |
| (*bta_ag_cb.p_cback)(BTA_AG_CLOSE_EVT, (tBTA_AG*)&close); |
| |
| /* if not deregistering (deallocating) reopen registered servers */ |
| if (!p_scb->dealloc) { |
| /* Clear peer bd_addr so instance can be reused */ |
| p_scb->peer_addr = RawAddress::kEmpty; |
| |
| /* start only unopened server */ |
| services = p_scb->reg_services; |
| for (i = 0; i < BTA_AG_NUM_IDX && services != 0; i++) { |
| if (p_scb->serv_handle[i]) |
| services &= ~((tBTA_SERVICE_MASK)1 << (BTA_HSP_SERVICE_ID + i)); |
| } |
| bta_ag_start_servers(p_scb, services); |
| |
| p_scb->conn_handle = 0; |
| |
| /* Make sure SCO state is BTA_AG_SCO_SHUTDOWN_ST */ |
| bta_ag_sco_shutdown(p_scb, tBTA_AG_DATA::kEmpty); |
| |
| /* Check if all the SLCs are down */ |
| for (i = 0; i < BTA_AG_MAX_NUM_CLIENTS; i++) { |
| if (bta_ag_cb.scb[i].in_use && bta_ag_cb.scb[i].svc_conn) |
| num_active_conn++; |
| } |
| |
| if (!num_active_conn) { |
| bta_sys_sco_unuse(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| } |
| |
| } |
| /* else close port and deallocate scb */ |
| else { |
| RFCOMM_RemoveServer(p_scb->conn_handle); |
| bta_ag_scb_dealloc(p_scb); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_rfc_open |
| * |
| * Description Handle RFCOMM channel open. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_rfc_open(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| /* initialize AT feature variables */ |
| p_scb->clip_enabled = false; |
| p_scb->ccwa_enabled = false; |
| p_scb->cmer_enabled = false; |
| p_scb->cmee_enabled = false; |
| p_scb->inband_enabled = |
| ((p_scb->features & BTA_AG_FEAT_INBAND) == BTA_AG_FEAT_INBAND); |
| |
| /* set up AT command interpreter */ |
| p_scb->at_cb.p_at_tbl = bta_ag_at_tbl[p_scb->conn_service]; |
| p_scb->at_cb.p_cmd_cback = bta_ag_at_cback_tbl[p_scb->conn_service]; |
| p_scb->at_cb.p_err_cback = bta_ag_at_err_cback; |
| p_scb->at_cb.p_user = p_scb; |
| p_scb->at_cb.cmd_max_len = BTA_AG_CMD_MAX; |
| bta_ag_at_init(&p_scb->at_cb); |
| |
| bta_sys_conn_open(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| |
| bta_ag_cback_open(p_scb, p_scb->peer_addr, BTA_AG_SUCCESS); |
| |
| if (p_scb->conn_service == BTA_AG_HFP) { |
| /* if hfp start timer for service level conn */ |
| bta_sys_start_timer(p_scb->ring_timer, p_bta_ag_cfg->conn_tout, |
| BTA_AG_SVC_TIMEOUT_EVT, bta_ag_scb_to_idx(p_scb)); |
| } else { |
| /* else service level conn is open */ |
| bta_ag_svc_conn_open(p_scb, data); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_rfc_acp_open |
| * |
| * Description Handle RFCOMM channel open when accepting connection. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_rfc_acp_open(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| uint16_t lcid; |
| int i; |
| tBTA_AG_SCB *ag_scb, *other_scb; |
| RawAddress dev_addr = {}; |
| int status; |
| |
| /* set role */ |
| p_scb->role = BTA_AG_ACP; |
| |
| APPL_TRACE_DEBUG("bta_ag_rfc_acp_open: serv_handle0 = %d serv_handle1 = %d", |
| p_scb->serv_handle[0], p_scb->serv_handle[1]); |
| |
| /* get bd addr of peer */ |
| if (PORT_SUCCESS != |
| (status = PORT_CheckConnection(data.rfc.port_handle, dev_addr, &lcid))) { |
| APPL_TRACE_DEBUG( |
| "bta_ag_rfc_acp_open error PORT_CheckConnection returned status %d", |
| status); |
| } |
| |
| /* Collision Handling */ |
| for (i = 0, ag_scb = &bta_ag_cb.scb[0]; i < BTA_AG_MAX_NUM_CLIENTS; |
| i++, ag_scb++) { |
| if (ag_scb->in_use && alarm_is_scheduled(ag_scb->collision_timer)) { |
| alarm_cancel(ag_scb->collision_timer); |
| |
| if (dev_addr == ag_scb->peer_addr) { |
| /* If incoming and outgoing device are same, nothing more to do. */ |
| /* Outgoing conn will be aborted because we have successful incoming |
| * conn. */ |
| } else { |
| /* Resume outgoing connection. */ |
| other_scb = bta_ag_get_other_idle_scb(p_scb); |
| if (other_scb) { |
| other_scb->peer_addr = ag_scb->peer_addr; |
| other_scb->open_services = ag_scb->open_services; |
| other_scb->cli_sec_mask = ag_scb->cli_sec_mask; |
| |
| bta_ag_resume_open(other_scb); |
| } |
| } |
| |
| break; |
| } |
| } |
| |
| p_scb->peer_addr = dev_addr; |
| |
| /* determine connected service from port handle */ |
| for (i = 0; i < BTA_AG_NUM_IDX; i++) { |
| APPL_TRACE_DEBUG( |
| "bta_ag_rfc_acp_open: i = %d serv_handle = %d port_handle = %d", i, |
| p_scb->serv_handle[i], data.rfc.port_handle); |
| |
| if (p_scb->serv_handle[i] == data.rfc.port_handle) { |
| p_scb->conn_service = i; |
| p_scb->conn_handle = data.rfc.port_handle; |
| break; |
| } |
| } |
| |
| APPL_TRACE_DEBUG("bta_ag_rfc_acp_open: conn_service = %d conn_handle = %d", |
| p_scb->conn_service, p_scb->conn_handle); |
| |
| /* close any unopened server */ |
| bta_ag_close_servers( |
| p_scb, (p_scb->reg_services & ~bta_ag_svc_mask[p_scb->conn_service])); |
| |
| /* do service discovery to get features */ |
| bta_ag_do_disc(p_scb, bta_ag_svc_mask[p_scb->conn_service]); |
| |
| /* continue with common open processing */ |
| bta_ag_rfc_open(p_scb, data); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_rfc_data |
| * |
| * Description Read and process data from RFCOMM. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_rfc_data(tBTA_AG_SCB* p_scb, UNUSED_ATTR const tBTA_AG_DATA& data) { |
| uint16_t len; |
| char buf[BTA_AG_RFC_READ_MAX] = ""; |
| |
| APPL_TRACE_DEBUG("%s", __func__); |
| |
| /* do the following */ |
| for (;;) { |
| /* read data from rfcomm; if bad status, we're done */ |
| if (PORT_ReadData(p_scb->conn_handle, buf, BTA_AG_RFC_READ_MAX, &len) != |
| PORT_SUCCESS) { |
| break; |
| } |
| |
| /* if no data, we're done */ |
| if (len == 0) { |
| break; |
| } |
| |
| /* run AT command interpreter on data */ |
| bta_sys_busy(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| bta_ag_at_parse(&p_scb->at_cb, buf, len); |
| if ((p_scb->sco_idx != BTM_INVALID_SCO_INDEX) && |
| bta_ag_sco_is_open(p_scb)) { |
| APPL_TRACE_DEBUG("%s change link policy for SCO", __func__); |
| bta_sys_sco_open(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| } else { |
| bta_sys_idle(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| } |
| |
| /* no more data to read, we're done */ |
| if (len < BTA_AG_RFC_READ_MAX) { |
| break; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_start_close |
| * |
| * Description Start the process of closing SCO and RFCOMM connection. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_start_close(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| /* Take the link out of sniff and set L2C idle time to 0 */ |
| bta_dm_pm_active(p_scb->peer_addr); |
| L2CA_SetIdleTimeoutByBdAddr(p_scb->peer_addr, 0, BT_TRANSPORT_BR_EDR); |
| |
| /* if SCO is open close SCO and wait on RFCOMM close */ |
| if (bta_ag_sco_is_open(p_scb)) { |
| p_scb->post_sco = BTA_AG_POST_SCO_CLOSE_RFC; |
| } else { |
| p_scb->post_sco = BTA_AG_POST_SCO_NONE; |
| bta_ag_rfc_do_close(p_scb, data); |
| } |
| |
| /* always do SCO shutdown to handle all SCO corner cases */ |
| bta_ag_sco_shutdown(p_scb, data); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_post_sco_open |
| * |
| * Description Perform post-SCO open action, if any |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_post_sco_open(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| switch (p_scb->post_sco) { |
| case BTA_AG_POST_SCO_RING: |
| bta_ag_send_ring(p_scb, data); |
| p_scb->post_sco = BTA_AG_POST_SCO_NONE; |
| break; |
| |
| case BTA_AG_POST_SCO_CALL_CONN: |
| bta_ag_send_call_inds(p_scb, BTA_AG_IN_CALL_CONN_RES); |
| p_scb->post_sco = BTA_AG_POST_SCO_NONE; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_post_sco_close |
| * |
| * Description Perform post-SCO close action, if any |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_post_sco_close(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| switch (p_scb->post_sco) { |
| case BTA_AG_POST_SCO_CLOSE_RFC: |
| bta_ag_rfc_do_close(p_scb, data); |
| p_scb->post_sco = BTA_AG_POST_SCO_NONE; |
| break; |
| |
| case BTA_AG_POST_SCO_CALL_CONN: |
| bta_ag_send_call_inds(p_scb, BTA_AG_IN_CALL_CONN_RES); |
| p_scb->post_sco = BTA_AG_POST_SCO_NONE; |
| break; |
| |
| case BTA_AG_POST_SCO_CALL_ORIG: |
| bta_ag_send_call_inds(p_scb, BTA_AG_OUT_CALL_ORIG_RES); |
| p_scb->post_sco = BTA_AG_POST_SCO_NONE; |
| break; |
| |
| case BTA_AG_POST_SCO_CALL_END: |
| bta_ag_send_call_inds(p_scb, BTA_AG_END_CALL_RES); |
| p_scb->post_sco = BTA_AG_POST_SCO_NONE; |
| break; |
| |
| case BTA_AG_POST_SCO_CALL_END_INCALL: |
| bta_ag_send_call_inds(p_scb, BTA_AG_END_CALL_RES); |
| |
| /* Sending callsetup IND and Ring were defered to after SCO close. */ |
| bta_ag_send_call_inds(p_scb, BTA_AG_IN_CALL_RES); |
| |
| if (bta_ag_inband_enabled(p_scb) && |
| !(p_scb->features & BTA_AG_FEAT_NOSCO)) { |
| p_scb->post_sco = BTA_AG_POST_SCO_RING; |
| bta_ag_sco_open(p_scb, data); |
| } else { |
| p_scb->post_sco = BTA_AG_POST_SCO_NONE; |
| bta_ag_send_ring(p_scb, data); |
| } |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_svc_conn_open |
| * |
| * Description Service level connection opened |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_svc_conn_open(tBTA_AG_SCB* p_scb, |
| UNUSED_ATTR const tBTA_AG_DATA& data) { |
| tBTA_AG_CONN evt = {}; |
| |
| if (!p_scb->svc_conn) { |
| /* set state variable */ |
| p_scb->svc_conn = true; |
| |
| /* Clear AT+BIA mask from previous SLC if any. */ |
| p_scb->bia_masked_out = 0; |
| |
| alarm_cancel(p_scb->ring_timer); |
| |
| /* call callback */ |
| evt.hdr.handle = bta_ag_scb_to_idx(p_scb); |
| evt.hdr.app_id = p_scb->app_id; |
| evt.peer_feat = p_scb->peer_features; |
| evt.bd_addr = p_scb->peer_addr; |
| evt.peer_codec = p_scb->peer_codecs; |
| |
| if ((p_scb->call_ind != BTA_AG_CALL_INACTIVE) || |
| (p_scb->callsetup_ind != BTA_AG_CALLSETUP_NONE)) { |
| bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| } |
| if (bta_ag_get_active_device().IsEmpty()) { |
| bta_ag_api_set_active_device(p_scb->peer_addr); |
| } |
| (*bta_ag_cb.p_cback)(BTA_AG_CONN_EVT, (tBTA_AG*)&evt); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_setcodec |
| * |
| * Description Handle API SetCodec |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_ag_setcodec(tBTA_AG_SCB* p_scb, const tBTA_AG_DATA& data) { |
| tBTA_AG_PEER_CODEC codec_type = data.api_setcodec.codec; |
| tBTA_AG_VAL val = {}; |
| |
| /* Check if the requested codec type is valid */ |
| if ((codec_type != BTA_AG_CODEC_NONE) && (codec_type != BTA_AG_CODEC_CVSD) && |
| (codec_type != BTA_AG_CODEC_MSBC)) { |
| val.num = codec_type; |
| val.hdr.status = BTA_AG_FAIL_RESOURCES; |
| APPL_TRACE_ERROR("bta_ag_setcodec error: unsupported codec type %d", |
| codec_type); |
| (*bta_ag_cb.p_cback)(BTA_AG_WBS_EVT, (tBTA_AG*)&val); |
| return; |
| } |
| |
| if ((p_scb->peer_codecs & codec_type) || (codec_type == BTA_AG_CODEC_NONE) || |
| (codec_type == BTA_AG_CODEC_CVSD)) { |
| p_scb->sco_codec = codec_type; |
| p_scb->codec_updated = true; |
| val.num = codec_type; |
| val.hdr.status = BTA_AG_SUCCESS; |
| APPL_TRACE_DEBUG("bta_ag_setcodec: Updated codec type %d", codec_type); |
| } else { |
| val.num = codec_type; |
| val.hdr.status = BTA_AG_FAIL_RESOURCES; |
| APPL_TRACE_ERROR("bta_ag_setcodec error: unsupported codec type %d", |
| codec_type); |
| } |
| |
| (*bta_ag_cb.p_cback)(BTA_AG_WBS_EVT, (tBTA_AG*)&val); |
| } |