| /****************************************************************************** |
| * |
| * Copyright 2014 Google, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #include <getopt.h> |
| #include <signal.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| |
| #include "btcore/include/property.h" |
| #include "osi/include/osi.h" |
| #include "test/suite/support/callbacks.h" |
| #include "test/suite/support/hal.h" |
| |
| static const Uuid HFP_UUID = |
| Uuid::From128BitBE({{0x00, 0x00, 0x11, 0x1E, 0x00, 0x00, 0x10, 0x00, 0x80, |
| 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB}}); |
| static const Uuid HFP_AG_UUID = |
| Uuid::From128BitBE({{0x00, 0x00, 0x11, 0x1F, 0x00, 0x00, 0x10, 0x00, 0x80, |
| 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB}}); |
| |
| const bt_interface_t* bt_interface; |
| |
| RawAddress bt_remote_bdaddr; |
| |
| static int f_verbose; |
| static bool discover = false; |
| static bool discoverable = false; |
| static bool bond = false; |
| static bool up = false; |
| static bool get_name = false; |
| static bool set_name = false; |
| static bool sco_listen = false; |
| static bool sco_connect = false; |
| |
| static int timeout_in_sec = 30; |
| static char* bd_name; |
| |
| static struct option long_options[] = { |
| {"bdaddr", required_argument, 0, 0}, {"discover", no_argument, 0, 0}, |
| {"discoverable", no_argument, 0, 0}, {"time", required_argument, 0, 0}, |
| {"bond", no_argument, 0, 0}, {"up", no_argument, 0, 0}, |
| {"verbose", no_argument, 0, 0}, {"get_name", no_argument, 0, 0}, |
| {"set_name", required_argument, 0, 0}, {"sco_listen", no_argument, 0, 0}, |
| {"sco_connect", no_argument, 0, 0}, {0, 0, 0, 0}}; |
| |
| static void usage(const char* name); |
| static bool parse_args(int argc, char** argv); |
| static void sig_handler(int signo); |
| |
| bt_property_t* adapter_get_property(bt_property_type_t type); |
| |
| int main(int argc, char** argv) { |
| if (!parse_args(argc, argv)) { |
| usage(argv[0]); |
| } |
| |
| if (bond && discoverable) { |
| fprintf(stderr, "Can only select either bond or discoverable, not both\n"); |
| usage(argv[0]); |
| } |
| |
| if (sco_listen && sco_connect) { |
| fprintf(stderr, |
| "Can only select either sco_listen or sco_connect, not both\n"); |
| usage(argv[0]); |
| } |
| |
| if (!bond && !discover && !discoverable && !up && !get_name && !set_name && |
| !sco_listen && !sco_connect) { |
| fprintf(stderr, "Must specify one command\n"); |
| usage(argv[0]); |
| } |
| |
| if (signal(SIGINT, sig_handler) == SIG_ERR) { |
| fprintf(stderr, "Will be unable to catch signals\n"); |
| } |
| |
| fprintf(stdout, "Bringing up bluetooth adapter\n"); |
| if (!hal_open(callbacks_get_adapter_struct())) { |
| fprintf(stderr, "Unable to open Bluetooth HAL.\n"); |
| return 1; |
| } |
| |
| if (discover) { |
| CALL_AND_WAIT(bt_interface->enable(), adapter_state_changed); |
| fprintf(stdout, "BT adapter is up\n"); |
| |
| fprintf(stdout, "Starting to start discovery\n"); |
| CALL_AND_WAIT(bt_interface->start_discovery(), discovery_state_changed); |
| fprintf(stdout, "Started discovery for %d seconds\n", timeout_in_sec); |
| |
| sleep(timeout_in_sec); |
| |
| fprintf(stdout, "Starting to cancel discovery\n"); |
| CALL_AND_WAIT(bt_interface->cancel_discovery(), discovery_state_changed); |
| fprintf(stdout, "Cancelled discovery after %d seconds\n", timeout_in_sec); |
| } |
| |
| if (discoverable) { |
| CALL_AND_WAIT(bt_interface->enable(), adapter_state_changed); |
| fprintf(stdout, "BT adapter is up\n"); |
| |
| bt_property_t* property = |
| property_new_scan_mode(BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE); |
| |
| int rc = bt_interface->set_adapter_property(property); |
| fprintf(stdout, "Set rc:%d device as discoverable for %d seconds\n", rc, |
| timeout_in_sec); |
| |
| sleep(timeout_in_sec); |
| |
| property_free(property); |
| } |
| |
| if (bond) { |
| if (bdaddr_is_empty(&bt_remote_bdaddr)) { |
| fprintf(stderr, |
| "Must specify a remote device address [ " |
| "--bdaddr=xx:yy:zz:aa:bb:cc ]\n"); |
| exit(1); |
| } |
| |
| CALL_AND_WAIT(bt_interface->enable(), adapter_state_changed); |
| fprintf(stdout, "BT adapter is up\n"); |
| |
| int rc = bt_interface->create_bond( |
| &bt_remote_bdaddr, 0 /* UNKNOWN; Currently not documented :( */); |
| fprintf(stdout, "Started bonding:%d for %d seconds\n", rc, timeout_in_sec); |
| |
| sleep(timeout_in_sec); |
| } |
| |
| if (up) { |
| CALL_AND_WAIT(bt_interface->enable(), adapter_state_changed); |
| fprintf(stdout, "BT adapter is up\n"); |
| |
| fprintf(stdout, "Waiting for %d seconds\n", timeout_in_sec); |
| sleep(timeout_in_sec); |
| } |
| |
| if (get_name) { |
| CALL_AND_WAIT(bt_interface->enable(), adapter_state_changed); |
| fprintf(stdout, "BT adapter is up\n"); |
| int error; |
| CALL_AND_WAIT( |
| error = bt_interface->get_adapter_property(BT_PROPERTY_BDNAME), |
| adapter_properties); |
| if (error != BT_STATUS_SUCCESS) { |
| fprintf(stderr, "Unable to get adapter property\n"); |
| exit(1); |
| } |
| bt_property_t* property = adapter_get_property(BT_PROPERTY_BDNAME); |
| const bt_bdname_t* name = property_as_name(property); |
| if (name) |
| printf("Queried bluetooth device name:%s\n", name->name); |
| else |
| printf("No name\n"); |
| } |
| |
| if (set_name) { |
| CALL_AND_WAIT(bt_interface->enable(), adapter_state_changed); |
| fprintf(stdout, "BT adapter is up\n"); |
| |
| bt_property_t* property = property_new_name(bd_name); |
| printf("Setting bluetooth device name to:%s\n", bd_name); |
| int error; |
| CALL_AND_WAIT(error = bt_interface->set_adapter_property(property), |
| adapter_properties); |
| if (error != BT_STATUS_SUCCESS) { |
| fprintf(stderr, "Unable to set adapter property\n"); |
| exit(1); |
| } |
| CALL_AND_WAIT( |
| error = bt_interface->get_adapter_property(BT_PROPERTY_BDNAME), |
| adapter_properties); |
| if (error != BT_STATUS_SUCCESS) { |
| fprintf(stderr, "Unable to get adapter property\n"); |
| exit(1); |
| } |
| property_free(property); |
| sleep(timeout_in_sec); |
| } |
| |
| const int app_uid = 0; |
| |
| if (sco_listen) { |
| CALL_AND_WAIT(bt_interface->enable(), adapter_state_changed); |
| fprintf(stdout, "BT adapter is up\n"); |
| |
| bt_property_t* property = |
| property_new_scan_mode(BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE); |
| CALL_AND_WAIT(bt_interface->set_adapter_property(property), |
| adapter_properties); |
| property_free(property); |
| |
| const btsock_interface_t* sock = |
| bt_interface->get_profile_interface(BT_PROFILE_SOCKETS_ID); |
| |
| int rfcomm_fd = INVALID_FD; |
| int error = |
| sock->listen(BTSOCK_RFCOMM, "meow", (const uint8_t*)&HFP_AG_UUID, 0, |
| &rfcomm_fd, 0, app_uid); |
| if (error != BT_STATUS_SUCCESS) { |
| fprintf(stderr, "Unable to listen for incoming RFCOMM socket: %d\n", |
| error); |
| exit(1); |
| } |
| |
| int sock_fd = INVALID_FD; |
| error = sock->listen(BTSOCK_SCO, NULL, NULL, 5, &sock_fd, 0, app_uid); |
| if (error != BT_STATUS_SUCCESS) { |
| fprintf(stderr, "Unable to listen for incoming SCO sockets: %d\n", error); |
| exit(1); |
| } |
| fprintf(stdout, "Waiting for incoming SCO connections...\n"); |
| sleep(timeout_in_sec); |
| } |
| |
| if (sco_connect) { |
| if (bdaddr_is_empty(&bt_remote_bdaddr)) { |
| fprintf(stderr, |
| "Must specify a remote device address [ " |
| "--bdaddr=xx:yy:zz:aa:bb:cc ]\n"); |
| exit(1); |
| } |
| |
| CALL_AND_WAIT(bt_interface->enable(), adapter_state_changed); |
| fprintf(stdout, "BT adapter is up\n"); |
| |
| const btsock_interface_t* sock = |
| bt_interface->get_profile_interface(BT_PROFILE_SOCKETS_ID); |
| |
| int rfcomm_fd = INVALID_FD; |
| int error = |
| sock->connect(&bt_remote_bdaddr, BTSOCK_RFCOMM, |
| (const uint8_t*)&HFP_AG_UUID, 0, &rfcomm_fd, 0, app_uid); |
| if (error != BT_STATUS_SUCCESS) { |
| fprintf(stderr, "Unable to connect to RFCOMM socket: %d.\n", error); |
| exit(1); |
| } |
| |
| WAIT(acl_state_changed); |
| |
| fprintf(stdout, "Establishing SCO connection...\n"); |
| |
| int sock_fd = INVALID_FD; |
| error = sock->connect(&bt_remote_bdaddr, BTSOCK_SCO, NULL, 5, &sock_fd, 0, |
| app_uid); |
| if (error != BT_STATUS_SUCCESS) { |
| fprintf(stderr, "Unable to connect to SCO socket: %d.\n", error); |
| exit(1); |
| } |
| sleep(timeout_in_sec); |
| } |
| |
| CALL_AND_WAIT(bt_interface->disable(), adapter_state_changed); |
| fprintf(stdout, "BT adapter is down\n"); |
| } |
| |
| static void sig_handler(int signo) { |
| if (signo == SIGINT) { |
| fprintf(stderr, "Received SIGINT\n"); |
| CALL_AND_WAIT(bt_interface->disable(), adapter_state_changed); |
| fprintf(stderr, "BT adapter is down\n"); |
| exit(1); |
| } |
| } |
| |
| static void usage(const char* name) { |
| fprintf(stderr, |
| "Usage: %s " |
| "[--bond|--discover|--discoverable|--up|--sco_listen|--sco_connect] " |
| "[--bdaddr=<bdaddr>] [--time=<time_in_sec>] --verbose\n", |
| name); |
| fprintf(stderr, " bond: Discover actively advertising devices\n"); |
| fprintf(stderr, " discover: Discover actively advertising devices\n"); |
| fprintf(stderr, |
| " discoverable: Set into a connectable and discoverable mode\n"); |
| fprintf(stderr, " up: Only bring up stack\n"); |
| fprintf(stderr, " sco_listen: Listen for incoming SCO connections\n"); |
| fprintf(stderr, |
| " sco_connect: Establish a SCO connection with another device\n"); |
| fprintf(stderr, " time: Time to hold in the specified mode\n"); |
| exit(1); |
| } |
| |
| static bool parse_args(int argc, char** argv) { |
| while (1) { |
| int option_index = 0; |
| int c = getopt_long_only(argc, argv, "", long_options, &option_index); |
| if (c != 0) break; |
| |
| switch (c) { |
| case 0: |
| if (option_index == 0) { |
| if (!string_to_bdaddr(optarg, &bt_remote_bdaddr)) { |
| return false; |
| } |
| } |
| if (option_index == 1) { |
| discover = true; |
| } |
| if (option_index == 2) { |
| discoverable = true; |
| } |
| if (option_index == 3) { |
| timeout_in_sec = atoi(optarg); |
| } |
| if (option_index == 4) { |
| bond = true; |
| } |
| if (option_index == 5) { |
| up = true; |
| } |
| if (option_index == 6) { |
| f_verbose++; |
| } |
| if (option_index == 7) { |
| get_name = true; |
| } |
| if (option_index == 8) { |
| bd_name = (char*)optarg; |
| set_name = true; |
| } |
| if (option_index == 9) { |
| sco_listen = true; |
| } |
| if (option_index == 10) { |
| sco_connect = true; |
| } |
| break; |
| |
| default: |
| fprintf(stderr, "?? getopt returned character code 0%o ??\n", c); |
| } |
| } |
| |
| if (optind < argc) { |
| fprintf(stderr, "non-option ARGV-elements: "); |
| while (optind < argc) fprintf(stderr, "%s ", argv[optind++]); |
| fprintf(stderr, "\n"); |
| return false; |
| } |
| return true; |
| } |