| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This module contains functions for port emulation entity and RFCOMM |
| * communications |
| * |
| ******************************************************************************/ |
| #include <string.h> |
| |
| #include "bt_target.h" |
| #include "gki.h" |
| #include "rfcdefs.h" |
| #include "port_api.h" |
| #include "btm_int.h" |
| #include "btm_api.h" |
| #include "port_int.h" |
| #include "rfc_int.h" |
| #include "bt_utils.h" |
| |
| /* |
| ** Local function definitions |
| */ |
| UINT32 port_rfc_send_tx_data (tPORT *p_port); |
| void port_rfc_closed (tPORT *p_port, UINT8 res); |
| void port_get_credits (tPORT *p_port, UINT8 k); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function port_open_continue |
| ** |
| ** Description This function is called after security manager completes |
| ** required security checks. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| int port_open_continue (tPORT *p_port) |
| { |
| tRFC_MCB *p_mcb; |
| |
| RFCOMM_TRACE_EVENT ("port_open_continue, p_port:%p", p_port); |
| |
| /* Check if multiplexer channel has already been established */ |
| if ((p_mcb = rfc_alloc_multiplexer_channel (p_port->bd_addr, TRUE)) == NULL) |
| { |
| RFCOMM_TRACE_WARNING ("port_open_continue no mx channel"); |
| port_release_port (p_port); |
| return (PORT_NO_RESOURCES); |
| } |
| |
| p_port->rfc.p_mcb = p_mcb; |
| |
| p_mcb->port_inx[p_port->dlci] = p_port->inx; |
| |
| /* Connection is up and we know local and remote features, select MTU */ |
| port_select_mtu (p_port); |
| |
| if (p_mcb->state == RFC_MX_STATE_CONNECTED) |
| { |
| RFCOMM_ParNegReq (p_mcb, p_port->dlci, p_port->mtu); |
| } |
| else if ((p_mcb->state == RFC_MX_STATE_IDLE) |
| ||(p_mcb->state == RFC_MX_STATE_DISC_WAIT_UA)) |
| { |
| /* In RFC_MX_STATE_IDLE state, MX state machine will create connection */ |
| /* In RFC_MX_STATE_DISC_WAIT_UA state, MX state machine will recreate connection */ |
| /* after disconnecting is completed */ |
| RFCOMM_StartReq (p_mcb); |
| } |
| else |
| { |
| /* MX state machine ignores RFC_MX_EVENT_START_REQ in these states */ |
| /* When it enters RFC_MX_STATE_CONNECTED, it will check any openning ports */ |
| RFCOMM_TRACE_DEBUG ("port_open_continue: mx state(%d) mx channel is openning", p_mcb->state); |
| } |
| return (PORT_SUCCESS); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function port_start_control |
| ** |
| ** Description This function is called in the BTU_TASK context to |
| ** send control information |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void port_start_control (tPORT *p_port) |
| { |
| tRFC_MCB *p_mcb = p_port->rfc.p_mcb; |
| |
| if (p_mcb == NULL) |
| return; |
| |
| RFCOMM_ControlReq (p_mcb, p_port->dlci, &p_port->local_ctrl); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function port_start_par_neg |
| ** |
| ** Description This function is called in the BTU_TASK context to |
| ** send configuration information |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void port_start_par_neg (tPORT *p_port) |
| { |
| tRFC_MCB *p_mcb = p_port->rfc.p_mcb; |
| |
| if (p_mcb == NULL) |
| return; |
| |
| RFCOMM_PortNegReq (p_mcb, p_port->dlci, &p_port->user_port_pars); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function port_start_close |
| ** |
| ** Description This function is called in the BTU_TASK context to |
| ** release DLC |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void port_start_close (tPORT *p_port) |
| { |
| tRFC_MCB *p_mcb = p_port->rfc.p_mcb; |
| UINT8 old_signals; |
| UINT32 events = 0; |
| |
| /* At first indicate to the user that signals on the connection were dropped */ |
| p_port->line_status |= LINE_STATUS_FAILED; |
| old_signals = p_port->peer_ctrl.modem_signal; |
| |
| p_port->peer_ctrl.modem_signal &= ~(PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON); |
| |
| events |= port_get_signal_changes (p_port, old_signals, p_port->peer_ctrl.modem_signal); |
| |
| if(p_port->ev_mask & PORT_EV_CONNECT_ERR) |
| events |= PORT_EV_CONNECT_ERR; |
| |
| if(p_port->ev_mask & PORT_EV_ERR) |
| events |= PORT_EV_ERR; |
| |
| if ((p_port->p_callback != NULL) && events) |
| p_port->p_callback (events, p_port->inx); |
| |
| |
| /* Check if RFCOMM side has been closed while the message was queued */ |
| if ((p_mcb == NULL) || (p_port->rfc.state == RFC_STATE_CLOSED)) |
| { |
| /* Call management callback function before calling port_release_port() to clear tPort */ |
| if (p_port->p_mgmt_callback) |
| p_port->p_mgmt_callback (PORT_CLOSED, p_port->inx); |
| |
| port_release_port (p_port); |
| } |
| else |
| { |
| RFCOMM_DlcReleaseReq (p_mcb, p_port->dlci); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_StartCnf |
| ** |
| ** Description This function is called from the RFCOMM layer when |
| ** establishing of the multiplexer channel is completed. |
| ** Continue establishing of the connection for all ports that |
| ** are in the OPENING state |
| ** |
| *******************************************************************************/ |
| void PORT_StartCnf (tRFC_MCB *p_mcb, UINT16 result) |
| { |
| tPORT *p_port; |
| int i; |
| BOOLEAN no_ports_up = TRUE; |
| |
| RFCOMM_TRACE_EVENT ("PORT_StartCnf result:%d", result); |
| |
| p_port = &rfc_cb.port.port[0]; |
| for (i = 0; i < MAX_RFC_PORTS; i++, p_port++) |
| { |
| if (p_port->rfc.p_mcb == p_mcb) |
| { |
| no_ports_up = FALSE; |
| |
| if (result == RFCOMM_SUCCESS) |
| RFCOMM_ParNegReq (p_mcb, p_port->dlci, p_port->mtu); |
| else |
| { |
| RFCOMM_TRACE_WARNING ("PORT_StartCnf failed result:%d", result); |
| |
| /* Warning: result is also set to 4 when l2cap connection |
| fails due to l2cap connect cnf (no_resources) */ |
| if( result == HCI_ERR_PAGE_TIMEOUT ) |
| p_port->error = PORT_PAGE_TIMEOUT; |
| else |
| p_port->error = PORT_START_FAILED; |
| |
| rfc_release_multiplexer_channel (p_mcb); |
| p_port->rfc.p_mcb = NULL; |
| |
| /* Send event to the application */ |
| if (p_port->p_callback && (p_port->ev_mask & PORT_EV_CONNECT_ERR)) |
| (p_port->p_callback)(PORT_EV_CONNECT_ERR, p_port->inx); |
| |
| if (p_port->p_mgmt_callback) |
| p_port->p_mgmt_callback (PORT_START_FAILED, p_port->inx); |
| |
| port_release_port (p_port); |
| } |
| } |
| } |
| |
| /* There can be a situation when after starting connection, user closes the */ |
| /* port, we can catch it here to close multiplexor channel */ |
| if (no_ports_up) |
| { |
| rfc_check_mcb_active (p_mcb); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_StartInd |
| ** |
| ** Description This function is called from the RFCOMM layer when |
| ** some peer device wants to establish a multiplexer |
| ** connection. Check if there are any ports open with this |
| ** or not assigned multiplexer. |
| ** |
| *******************************************************************************/ |
| void PORT_StartInd (tRFC_MCB *p_mcb) |
| { |
| tPORT *p_port; |
| int i; |
| |
| RFCOMM_TRACE_EVENT ("PORT_StartInd"); |
| |
| p_port = &rfc_cb.port.port[0]; |
| for (i = 0; i < MAX_RFC_PORTS; i++, p_port++) |
| { |
| if ((p_port->rfc.p_mcb == NULL) |
| || (p_port->rfc.p_mcb == p_mcb)) |
| { |
| RFCOMM_TRACE_DEBUG("PORT_StartInd, RFCOMM_StartRsp RFCOMM_SUCCESS: p_mcb:%p", p_mcb); |
| RFCOMM_StartRsp (p_mcb, RFCOMM_SUCCESS); |
| return; |
| } |
| } |
| RFCOMM_StartRsp (p_mcb, RFCOMM_ERROR); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_ParNegInd |
| ** |
| ** Description This function is called from the RFCOMM layer to change |
| ** DLCI parameters (currently only MTU is negotiated). |
| ** If can not find the port do not accept the request. |
| ** Otherwise save the MTU size supported by the peer. |
| ** |
| *******************************************************************************/ |
| void PORT_ParNegInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| UINT8 our_cl; |
| UINT8 our_k; |
| |
| RFCOMM_TRACE_EVENT ("PORT_ParNegInd dlci:%d mtu:%d", dlci, mtu); |
| |
| if (!p_port) |
| { |
| /* This can be a first request for this port */ |
| p_port = port_find_dlci_port (dlci); |
| if (!p_port) |
| { |
| /* If the port cannot be opened, send a DM. Per Errata 1205 */ |
| rfc_send_dm(p_mcb, dlci, FALSE); |
| /* check if this is the last port open, some headsets have |
| problem, they don't disconnect if we send DM */ |
| rfc_check_mcb_active( p_mcb ); |
| RFCOMM_TRACE_EVENT( "PORT_ParNegInd: port not found" ); |
| return; |
| } |
| p_mcb->port_inx[dlci] = p_port->inx; |
| } |
| |
| memcpy (p_port->bd_addr, p_mcb->bd_addr, BD_ADDR_LEN); |
| |
| /* Connection is up and we know local and remote features, select MTU */ |
| port_select_mtu (p_port); |
| |
| p_port->rfc.p_mcb = p_mcb; |
| p_port->mtu = (p_port->mtu < mtu) ? p_port->mtu : mtu; |
| p_port->peer_mtu = p_port->mtu; |
| |
| /* Negotiate the flow control mechanism. If flow control mechanism for */ |
| /* mux has not been set yet, set it now. If either we or peer wants TS 07.10, */ |
| /* use that. Otherwise both must want credit based, so use that. If flow is */ |
| /* already defined for this mux, we respond with that value. */ |
| if (p_mcb->flow == PORT_FC_UNDEFINED) |
| { |
| if ((PORT_FC_DEFAULT == PORT_FC_TS710) || (cl == RFCOMM_PN_CONV_LAYER_TYPE_1)) |
| { |
| p_mcb->flow = PORT_FC_TS710; |
| } |
| else |
| { |
| p_mcb->flow = PORT_FC_CREDIT; |
| } |
| } |
| |
| /* Regardless of our flow control mechanism, if the PN cl is zero, we must */ |
| /* respond with zero. "A responding implementation must set this field to 14 */ |
| /* if (and only if) the PN request was 15." This could happen if a PN is sent */ |
| /* after the DLCI is already established-- the PN in that case must have cl = 0. */ |
| /* See RFCOMM spec 5.5.3 */ |
| if (cl == RFCOMM_PN_CONV_LAYER_TYPE_1) |
| { |
| our_cl = RFCOMM_PN_CONV_LAYER_TYPE_1; |
| our_k = 0; |
| } |
| else if (p_mcb->flow == PORT_FC_CREDIT) |
| { |
| /* get credits */ |
| port_get_credits (p_port, k); |
| |
| /* Set convergence layer and number of credits (k) */ |
| our_cl = RFCOMM_PN_CONV_LAYER_CBFC_R; |
| our_k = (p_port->credit_rx_max < RFCOMM_K_MAX) ? p_port->credit_rx_max : RFCOMM_K_MAX; |
| p_port->credit_rx = our_k; |
| } |
| else |
| { |
| /* must not be using credit based flow control; use TS 7.10 */ |
| our_cl = RFCOMM_PN_CONV_LAYER_TYPE_1; |
| our_k = 0; |
| } |
| RFCOMM_ParNegRsp (p_mcb, dlci, p_port->mtu, our_cl, our_k); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_ParNegCnf |
| ** |
| ** Description This function is called from the RFCOMM layer to change |
| ** DLCI parameters (currently only MTU is negotiated). |
| ** Save the MTU size supported by the peer. |
| ** If the confirmation is received during the port opening |
| ** procedure send EstablishRequest to continue. |
| ** |
| *******************************************************************************/ |
| void PORT_ParNegCnf (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| |
| RFCOMM_TRACE_EVENT ("PORT_ParNegCnf dlci:%d mtu:%d cl: %d k: %d", dlci, mtu, cl, k); |
| |
| if (!p_port) |
| return; |
| |
| /* Flow control mechanism not set yet. Negotiate flow control mechanism. */ |
| if (p_mcb->flow == PORT_FC_UNDEFINED) |
| { |
| /* Our stack is configured for TS07.10 and they responded with credit-based. */ |
| /* This is illegal-- negotiation fails. */ |
| if ((PORT_FC_DEFAULT == PORT_FC_TS710) && (cl == RFCOMM_PN_CONV_LAYER_CBFC_R)) |
| { |
| rfc_send_disc (p_mcb, p_port->dlci); |
| rfc_port_closed (p_port); |
| return; |
| } |
| /* Our stack is configured for credit-based and they responded with credit-based. */ |
| else if (cl == RFCOMM_PN_CONV_LAYER_CBFC_R) |
| { |
| p_mcb->flow = PORT_FC_CREDIT; |
| } |
| /* They responded with any other value. Treat this as negotiation to TS07.10. */ |
| else |
| { |
| p_mcb->flow = PORT_FC_TS710; |
| } |
| } |
| /* If mux flow control mechanism set, we honor that setting regardless of */ |
| /* the CL value in their response. This allows us to gracefully accept any */ |
| /* illegal PN negotiation scenarios. */ |
| |
| p_port->mtu = (p_port->mtu < mtu) ? p_port->mtu : mtu; |
| p_port->peer_mtu = p_port->mtu; |
| |
| if (p_mcb->flow == PORT_FC_CREDIT) |
| { |
| port_get_credits (p_port, k); |
| } |
| |
| if (p_port->state == PORT_STATE_OPENING) |
| RFCOMM_DlcEstablishReq (p_mcb, p_port->dlci, p_port->mtu); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_DlcEstablishInd |
| ** |
| ** Description This function is called from the RFCOMM layer when peer |
| ** device wants to establish a new DLC. If this is not the |
| ** first message in the establishment procedure port_handle |
| ** has a handle to the port control block otherwise the control |
| ** block should be found based on the muliplexer channel and |
| ** dlci. The block should be allocated allocated before |
| ** meaning that application already made open. |
| ** |
| *******************************************************************************/ |
| void PORT_DlcEstablishInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| |
| RFCOMM_TRACE_DEBUG ("PORT_DlcEstablishInd p_mcb:%p, dlci:%d mtu:%di, p_port:%p", p_mcb, dlci, mtu, p_port); |
| RFCOMM_TRACE_DEBUG ("PORT_DlcEstablishInd p_mcb addr:%02x:%02x:%02x:%02x:%02x:%02x", |
| p_mcb->bd_addr[0], p_mcb->bd_addr[1], p_mcb->bd_addr[2], |
| p_mcb->bd_addr[3], p_mcb->bd_addr[4], p_mcb->bd_addr[5]); |
| |
| if (!p_port) |
| { |
| /* This can be a first request for this port */ |
| p_port = port_find_dlci_port (dlci); |
| if (!p_port) |
| { |
| RFCOMM_DlcEstablishRsp (p_mcb, dlci, 0, RFCOMM_ERROR); |
| return; |
| } |
| p_mcb->port_inx[dlci] = p_port->inx; |
| } |
| |
| /* If L2CAP's mtu less then RFCOMM's take it */ |
| if (mtu && (mtu < p_port->peer_mtu)) |
| p_port->peer_mtu = mtu; |
| |
| /* If there was an inactivity timer running for MCB stop it */ |
| rfc_timer_stop (p_mcb); |
| |
| RFCOMM_DlcEstablishRsp (p_mcb, dlci, p_port->mtu, RFCOMM_SUCCESS); |
| |
| /* This is the server side. If application wants to know when connection */ |
| /* is established, thats the place */ |
| if (p_port->p_callback && (p_port->ev_mask & PORT_EV_CONNECTED)) |
| (p_port->p_callback)(PORT_EV_CONNECTED, p_port->inx); |
| |
| if (p_port->p_mgmt_callback) |
| p_port->p_mgmt_callback (PORT_SUCCESS, p_port->inx); |
| |
| p_port->state = PORT_STATE_OPENED; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_DlcEstablishCnf |
| ** |
| ** Description This function is called from the RFCOMM layer when peer |
| ** acknowledges establish procedure (SABME/UA). Send reply |
| ** to the user and set state to OPENED if result was |
| ** successfull. |
| ** |
| *******************************************************************************/ |
| void PORT_DlcEstablishCnf (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT16 result) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| |
| RFCOMM_TRACE_EVENT ("PORT_DlcEstablishCnf dlci:%d mtu:%d result:%d", dlci, mtu, result); |
| |
| if (!p_port) |
| return; |
| |
| if (result != RFCOMM_SUCCESS) |
| { |
| p_port->error = PORT_START_FAILED; |
| port_rfc_closed (p_port, PORT_START_FAILED); |
| return; |
| } |
| |
| /* If L2CAP's mtu less then RFCOMM's take it */ |
| if (mtu && (mtu < p_port->peer_mtu)) |
| p_port->peer_mtu = mtu; |
| |
| /* If there was an inactivity timer running for MCB stop it */ |
| rfc_timer_stop (p_mcb); |
| |
| if (p_port->p_callback && (p_port->ev_mask & PORT_EV_CONNECTED)) |
| (p_port->p_callback)(PORT_EV_CONNECTED, p_port->inx); |
| |
| if (p_port->p_mgmt_callback) |
| p_port->p_mgmt_callback (PORT_SUCCESS, p_port->inx); |
| |
| p_port->state = PORT_STATE_OPENED; |
| |
| /* RPN is required only if we want to tell DTE how the port should be opened */ |
| if ((p_port->uuid == UUID_SERVCLASS_DIALUP_NETWORKING) |
| || (p_port->uuid == UUID_SERVCLASS_FAX)) |
| RFCOMM_PortNegReq (p_port->rfc.p_mcb, p_port->dlci, NULL); |
| else |
| RFCOMM_ControlReq (p_port->rfc.p_mcb, p_port->dlci, &p_port->local_ctrl); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_PortNegInd |
| ** |
| ** Description This function is called from the RFCOMM layer when peer |
| ** device wants to set parameters of the port. As per the spec |
| ** this message has to be sent before the first data packet |
| ** and can be sent before establish. The block should be |
| ** allocated before meaning that application already made open. |
| ** |
| *******************************************************************************/ |
| void PORT_PortNegInd (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars, |
| UINT16 param_mask) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| |
| RFCOMM_TRACE_EVENT ("PORT_PortNegInd"); |
| |
| if (!p_port) |
| { |
| /* This can be a first request for this port */ |
| p_port = port_find_dlci_port (dlci); |
| if (!p_port) |
| { |
| RFCOMM_PortNegRsp (p_mcb, dlci, p_pars, 0); |
| return; |
| } |
| p_mcb->port_inx[dlci] = p_port->inx; |
| } |
| |
| /* Check if the flow control is acceptable on local side */ |
| p_port->peer_port_pars = *p_pars; |
| RFCOMM_PortNegRsp (p_mcb, dlci, p_pars, param_mask); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_PortNegCnf |
| ** |
| ** Description This function is called from the RFCOMM layer to change |
| ** state for the port. Propagate change to the user. |
| ** |
| *******************************************************************************/ |
| void PORT_PortNegCnf (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars, UINT16 result) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| UNUSED(p_pars); |
| |
| RFCOMM_TRACE_EVENT ("PORT_PortNegCnf"); |
| |
| if (!p_port) |
| { |
| RFCOMM_TRACE_WARNING ("PORT_PortNegCnf no port"); |
| return; |
| } |
| /* Port negotiation failed. Drop the connection */ |
| if (result != RFCOMM_SUCCESS) |
| { |
| p_port->error = PORT_PORT_NEG_FAILED; |
| |
| RFCOMM_DlcReleaseReq (p_mcb, p_port->dlci); |
| |
| port_rfc_closed (p_port, PORT_PORT_NEG_FAILED); |
| return; |
| } |
| |
| if (!(p_port->port_ctrl & PORT_CTRL_REQ_SENT)) |
| { |
| RFCOMM_ControlReq (p_port->rfc.p_mcb, p_port->dlci, &p_port->local_ctrl); |
| } |
| else |
| { |
| RFCOMM_TRACE_WARNING ("PORT_PortNegCnf Control Already sent"); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_ControlInd |
| ** |
| ** Description This function is called from the RFCOMM layer on the modem |
| ** signal change. Propagate change to the user. |
| ** |
| *******************************************************************************/ |
| void PORT_ControlInd (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_CTRL *p_pars) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| UINT32 event; |
| UINT8 old_signals; |
| |
| RFCOMM_TRACE_EVENT ("PORT_ControlInd"); |
| |
| if (!p_port) |
| return; |
| |
| old_signals = p_port->peer_ctrl.modem_signal; |
| |
| event = port_get_signal_changes (p_port, old_signals, p_pars->modem_signal); |
| |
| p_port->peer_ctrl = *p_pars; |
| |
| if (!(p_port->port_ctrl & PORT_CTRL_REQ_SENT)) |
| RFCOMM_ControlReq (p_port->rfc.p_mcb, p_port->dlci, &p_port->local_ctrl); |
| else |
| { |
| /* If this is the first time we received control RFCOMM is connected */ |
| if (!(p_port->port_ctrl & PORT_CTRL_IND_RECEIVED)) |
| { |
| event |= (PORT_EV_CONNECTED & p_port->ev_mask); |
| } |
| |
| if (p_port->port_ctrl & PORT_CTRL_REQ_CONFIRMED) |
| { |
| event |= port_rfc_send_tx_data(p_port); |
| } |
| } |
| |
| p_port->port_ctrl |= (PORT_CTRL_IND_RECEIVED | PORT_CTRL_IND_RESPONDED); |
| |
| if (p_pars->break_signal) |
| event |= (PORT_EV_BREAK & p_port->ev_mask); |
| |
| /* execute call back function only if the application is registered for events */ |
| if (event && p_port->p_callback) |
| (p_port->p_callback)(event, p_port->inx); |
| |
| RFCOMM_TRACE_EVENT ("PORT_ControlInd DTR_DSR : %d, RTS_CTS : %d, RI : %d, DCD : %d", |
| ((p_port->peer_ctrl.modem_signal & MODEM_SIGNAL_DTRDSR) ? 1 : 0), |
| ((p_port->peer_ctrl.modem_signal & MODEM_SIGNAL_RTSCTS) ? 1 : 0), |
| ((p_port->peer_ctrl.modem_signal & MODEM_SIGNAL_RI) ? 1 : 0), |
| ((p_port->peer_ctrl.modem_signal & MODEM_SIGNAL_DCD) ? 1 : 0)); |
| |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_ControlCnf |
| ** |
| ** Description This function is called from the RFCOMM layer when |
| ** peer acknowleges change of the modem signals. |
| ** |
| *******************************************************************************/ |
| void PORT_ControlCnf (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_CTRL *p_pars) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| UINT32 event = 0; |
| UNUSED(p_pars); |
| |
| RFCOMM_TRACE_EVENT ("PORT_ControlCnf"); |
| |
| if (!p_port) |
| return; |
| |
| if (!(p_port->port_ctrl & PORT_CTRL_REQ_CONFIRMED)) |
| { |
| p_port->port_ctrl |= PORT_CTRL_REQ_CONFIRMED; |
| |
| if (p_port->port_ctrl & PORT_CTRL_IND_RECEIVED) |
| event = (p_port->ev_mask & PORT_EV_CONNECTED); |
| } |
| |
| if (p_port->port_ctrl & PORT_CTRL_IND_RECEIVED) |
| { |
| event |= port_rfc_send_tx_data(p_port); |
| } |
| |
| /* execute call back function only if the application is registered for events */ |
| if (event && p_port->p_callback) |
| (p_port->p_callback)(event, p_port->inx); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_LineStatusInd |
| ** |
| ** Description This function is called from the RFCOMM layer when |
| ** peer indicates change in the line status |
| ** |
| *******************************************************************************/ |
| void PORT_LineStatusInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT8 line_status) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| UINT32 event = 0; |
| |
| RFCOMM_TRACE_EVENT ("PORT_LineStatusInd"); |
| |
| if (!p_port) |
| return; |
| |
| p_port->line_status |= line_status; |
| |
| if (line_status & PORT_ERR_OVERRUN) |
| event |= PORT_EV_OVERRUN; |
| |
| if (line_status & PORT_ERR_BREAK) |
| event |= PORT_EV_BREAK; |
| |
| if (line_status & ~(PORT_ERR_OVERRUN | PORT_ERR_BREAK)) |
| event |= PORT_EV_ERR; |
| |
| if ((p_port->p_callback != NULL) && (p_port->ev_mask & event)) |
| p_port->p_callback ((p_port->ev_mask & event), p_port->inx); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_DlcReleaseInd |
| ** |
| ** Description This function is called from the RFCOMM layer when |
| ** DLC connection is released. |
| ** |
| *******************************************************************************/ |
| void PORT_DlcReleaseInd (tRFC_MCB *p_mcb, UINT8 dlci) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| |
| RFCOMM_TRACE_EVENT ("PORT_DlcReleaseInd"); |
| |
| if (!p_port) |
| return; |
| |
| port_rfc_closed (p_port, PORT_CLOSED); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_CloseInd |
| ** |
| ** Description This function is called from the RFCOMM layer when |
| ** multiplexer connection is released. |
| ** |
| *******************************************************************************/ |
| void PORT_CloseInd (tRFC_MCB *p_mcb) |
| { |
| tPORT *p_port; |
| int i; |
| |
| RFCOMM_TRACE_EVENT ("PORT_CloseInd"); |
| |
| p_port = &rfc_cb.port.port[0]; |
| for (i = 0; i < MAX_RFC_PORTS; i++, p_port++) |
| { |
| if (p_port->rfc.p_mcb == p_mcb) |
| { |
| port_rfc_closed (p_port, PORT_PEER_CONNECTION_FAILED); |
| } |
| } |
| rfc_release_multiplexer_channel (p_mcb); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function Port_TimeOutCloseMux |
| ** |
| ** Description This function is called when RFCOMM timesout on a command |
| ** as a result multiplexer connection is closed. |
| ** |
| *******************************************************************************/ |
| void Port_TimeOutCloseMux (tRFC_MCB *p_mcb) |
| { |
| tPORT *p_port; |
| int i; |
| |
| RFCOMM_TRACE_EVENT ("Port_TimeOutCloseMux"); |
| |
| p_port = &rfc_cb.port.port[0]; |
| for (i = 0; i < MAX_RFC_PORTS; i++, p_port++) |
| { |
| if (p_port->rfc.p_mcb == p_mcb) |
| { |
| port_rfc_closed (p_port, PORT_PEER_TIMEOUT); |
| } |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_DataInd |
| ** |
| ** Description This function is called from the RFCOMM layer when data |
| ** buffer is received from the peer. |
| ** |
| *******************************************************************************/ |
| void PORT_DataInd (tRFC_MCB *p_mcb, UINT8 dlci, BT_HDR *p_buf) |
| { |
| tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci); |
| UINT8 rx_char1; |
| UINT32 events = 0; |
| UINT8 *p; |
| int i; |
| |
| RFCOMM_TRACE_EVENT("PORT_DataInd with data length %d, p_mcb:%p,p_port:%p,dlci:%d", |
| p_buf->len, p_mcb, p_port, dlci); |
| if (!p_port) |
| { |
| GKI_freebuf (p_buf); |
| return; |
| } |
| /* If client registered callout callback with flow control we can just deliver receive data */ |
| if (p_port->p_data_co_callback) |
| { |
| /* Another packet is delivered to user. Send credits to peer if required */ |
| |
| if(p_port->p_data_co_callback(p_port->inx, (UINT8*)p_buf, -1, DATA_CO_CALLBACK_TYPE_INCOMING)) |
| port_flow_control_peer(p_port, TRUE, 1); |
| else port_flow_control_peer(p_port, FALSE, 0); |
| //GKI_freebuf (p_buf); |
| return; |
| } |
| else RFCOMM_TRACE_ERROR("PORT_DataInd, p_port:%p, p_data_co_callback is null", p_port); |
| /* If client registered callback we can just deliver receive data */ |
| if (p_port->p_data_callback) |
| { |
| /* Another packet is delivered to user. Send credits to peer if required */ |
| port_flow_control_peer(p_port, TRUE, 1); |
| |
| p_port->p_data_callback (p_port->inx, (UINT8 *)(p_buf + 1) + p_buf->offset, p_buf->len); |
| GKI_freebuf (p_buf); |
| return; |
| } |
| |
| /* Check if rx queue exceeds the limit */ |
| if ((p_port->rx.queue_size + p_buf->len > PORT_RX_CRITICAL_WM) |
| || (GKI_queue_length(&p_port->rx.queue) + 1 > p_port->rx_buf_critical)) |
| { |
| RFCOMM_TRACE_EVENT ("PORT_DataInd. Buffer over run. Dropping the buffer"); |
| GKI_freebuf (p_buf); |
| |
| RFCOMM_LineStatusReq (p_mcb, dlci, LINE_STATUS_OVERRUN); |
| return; |
| } |
| |
| /* If user registered to receive notification when a particular byte is */ |
| /* received we mast check all received bytes */ |
| if (((rx_char1 = p_port->user_port_pars.rx_char1) != 0) |
| && (p_port->ev_mask & PORT_EV_RXFLAG)) |
| { |
| for (i = 0, p = (UINT8 *)(p_buf + 1) + p_buf->offset; i < p_buf->len; i++) |
| { |
| if (*p++ == rx_char1) |
| { |
| events |= PORT_EV_RXFLAG; |
| break; |
| } |
| } |
| } |
| |
| PORT_SCHEDULE_LOCK; |
| |
| GKI_enqueue (&p_port->rx.queue, p_buf); |
| p_port->rx.queue_size += p_buf->len; |
| |
| PORT_SCHEDULE_UNLOCK; |
| |
| /* perform flow control procedures if necessary */ |
| port_flow_control_peer(p_port, FALSE, 0); |
| |
| /* If user indicated flow control can not deliver any notifications to him */ |
| if (p_port->rx.user_fc) |
| { |
| if (events & PORT_EV_RXFLAG) |
| p_port->rx_flag_ev_pending = TRUE; |
| |
| return; |
| } |
| |
| events |= PORT_EV_RXCHAR; |
| |
| /* Mask out all events that are not of interest to user */ |
| events &= p_port->ev_mask; |
| |
| if (p_port->p_callback && events) |
| p_port->p_callback (events, p_port->inx); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_FlowInd |
| ** |
| ** Description This function is called from the RFCOMM layer on the flow |
| ** control signal change. Propagate change to the user. |
| ** |
| *******************************************************************************/ |
| void PORT_FlowInd (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN enable_data) |
| { |
| tPORT *p_port = (tPORT *)NULL; |
| UINT32 events = 0; |
| int i; |
| |
| RFCOMM_TRACE_EVENT ("PORT_FlowInd fc:%d", enable_data); |
| |
| if (dlci == 0) |
| { |
| p_mcb->peer_ready = enable_data; |
| } |
| else |
| { |
| if ((p_port = port_find_mcb_dlci_port (p_mcb, dlci)) == NULL) |
| return; |
| |
| p_port->tx.peer_fc = !enable_data; |
| } |
| |
| for (i = 0; i < MAX_RFC_PORTS; i++) |
| { |
| /* If DLCI is 0 event applies to all ports */ |
| if (dlci == 0) |
| { |
| p_port = &rfc_cb.port.port[i]; |
| if (!p_port->in_use |
| || (p_port->rfc.p_mcb != p_mcb) |
| || (p_port->rfc.state != RFC_STATE_OPENED)) |
| continue; |
| } |
| events = 0; |
| |
| /* Check if flow of data is still enabled */ |
| events |= port_flow_control_user (p_port); |
| |
| /* Check if data can be sent and send it */ |
| events |= port_rfc_send_tx_data (p_port); |
| |
| /* Mask out all events that are not of interest to user */ |
| events &= p_port->ev_mask; |
| |
| /* Send event to the application */ |
| if (p_port->p_callback && events) |
| (p_port->p_callback)(events, p_port->inx); |
| |
| /* If DLCI is not 0 event applies to one port only */ |
| if (dlci != 0) |
| break; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function port_rfc_send_tx_data |
| ** |
| ** Description This function is when forward data can be sent to the peer |
| ** |
| *******************************************************************************/ |
| UINT32 port_rfc_send_tx_data (tPORT *p_port) |
| { |
| UINT32 events = 0; |
| BT_HDR *p_buf; |
| |
| /* if there is data to be sent */ |
| if (p_port->tx.queue_size > 0) |
| { |
| /* while the rfcomm peer is not flow controlling us, and peer is ready */ |
| while (!p_port->tx.peer_fc && p_port->rfc.p_mcb && p_port->rfc.p_mcb->peer_ready) |
| { |
| /* get data from tx queue and send it */ |
| PORT_SCHEDULE_LOCK; |
| |
| if ((p_buf = (BT_HDR *)GKI_dequeue (&p_port->tx.queue)) != NULL) |
| { |
| p_port->tx.queue_size -= p_buf->len; |
| |
| PORT_SCHEDULE_UNLOCK; |
| |
| RFCOMM_TRACE_DEBUG ("Sending RFCOMM_DataReq tx.queue_size=%d", p_port->tx.queue_size); |
| |
| RFCOMM_DataReq (p_port->rfc.p_mcb, p_port->dlci, p_buf); |
| |
| events |= PORT_EV_TXCHAR; |
| |
| if (p_port->tx.queue_size == 0) |
| { |
| events |= PORT_EV_TXEMPTY; |
| break; |
| } |
| } |
| /* queue is empty-- all data sent */ |
| else |
| { |
| PORT_SCHEDULE_UNLOCK; |
| |
| events |= PORT_EV_TXEMPTY; |
| break; |
| } |
| } |
| /* If we flow controlled user based on the queue size enable data again */ |
| events |= port_flow_control_user (p_port); |
| } |
| return (events & p_port->ev_mask); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function port_rfc_closed |
| ** |
| ** Description This function when RFCOMM side of port is closed |
| ** |
| *******************************************************************************/ |
| void port_rfc_closed (tPORT *p_port, UINT8 res) |
| { |
| UINT8 old_signals; |
| UINT32 events = 0; |
| tRFC_MCB *p_mcb = p_port->rfc.p_mcb; |
| |
| if ((p_port->state == PORT_STATE_OPENING) && (p_port->is_server)) |
| { |
| /* The servr side has not been informed that connection is up, ignore */ |
| RFCOMM_TRACE_EVENT ("port_rfc_closed in OPENING state ignored"); |
| |
| rfc_port_timer_stop (p_port); |
| p_port->rfc.state = RFC_STATE_CLOSED; |
| |
| if (p_mcb) |
| { |
| p_mcb->port_inx[p_port->dlci] = 0; |
| |
| /* If there are no more ports opened on this MCB release it */ |
| rfc_check_mcb_active (p_mcb); |
| p_port->rfc.p_mcb = NULL; |
| } |
| |
| /* Need to restore DLCI to listening state |
| * if the server was on the initiating RFC |
| */ |
| p_port->dlci &= 0xfe; |
| |
| return; |
| } |
| |
| if ((p_port->state != PORT_STATE_CLOSING) && (p_port->state != PORT_STATE_CLOSED)) |
| { |
| p_port->line_status |= LINE_STATUS_FAILED; |
| |
| old_signals = p_port->peer_ctrl.modem_signal; |
| |
| p_port->peer_ctrl.modem_signal &= ~(PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON); |
| |
| events |= port_get_signal_changes (p_port, old_signals, p_port->peer_ctrl.modem_signal); |
| |
| if(p_port->ev_mask & PORT_EV_CONNECT_ERR) |
| events |= PORT_EV_CONNECT_ERR; |
| } |
| RFCOMM_TRACE_EVENT ("port_rfc_closed state:%d sending events:%x", p_port->state, events); |
| |
| if ((p_port->p_callback != NULL) && events) |
| p_port->p_callback (events, p_port->inx); |
| |
| if (p_port->p_mgmt_callback) |
| p_port->p_mgmt_callback (res, p_port->inx); |
| |
| p_port->rfc.state = RFC_STATE_CLOSED; |
| |
| port_release_port (p_port); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function port_get_credits |
| ** |
| ** Description Set initial values for credits. |
| ** Adjust max number of rx credits based on negotiated MTU. |
| ** Check max allowed num of bytes, max allowed num buffers, |
| ** should be less then 255 |
| ** |
| *******************************************************************************/ |
| void port_get_credits (tPORT *p_port, UINT8 k) |
| { |
| p_port->credit_tx = k; |
| if (p_port->credit_tx == 0) |
| p_port->tx.peer_fc = TRUE; |
| } |
| |
| |
| |