| /****************************************************************************** |
| * |
| * Copyright (C) 2002-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This module contains API of the audio/video distribution transport |
| * protocol. |
| * |
| ******************************************************************************/ |
| |
| #include <string.h> |
| #include "bt_types.h" |
| #include "bt_target.h" |
| #include "avdt_api.h" |
| #include "avdtc_api.h" |
| #include "avdt_int.h" |
| #include "l2c_api.h" |
| #include "btm_api.h" |
| #include "btu.h" |
| |
| |
| /* Control block for AVDT */ |
| #if AVDT_DYNAMIC_MEMORY == FALSE |
| tAVDT_CB avdt_cb; |
| #endif |
| |
| void avdt_ccb_idle_ccb_timer_timeout(void *data) |
| { |
| tAVDT_CCB *p_ccb = (tAVDT_CCB *)data; |
| uint8_t avdt_event = AVDT_CCB_IDLE_TOUT_EVT; |
| uint8_t err_code = AVDT_ERR_TIMEOUT; |
| |
| avdt_ccb_event(p_ccb, avdt_event, (tAVDT_CCB_EVT *)&err_code); |
| } |
| |
| void avdt_ccb_ret_ccb_timer_timeout(void *data) |
| { |
| tAVDT_CCB *p_ccb = (tAVDT_CCB *)data; |
| uint8_t avdt_event = AVDT_CCB_RET_TOUT_EVT; |
| uint8_t err_code = AVDT_ERR_TIMEOUT; |
| |
| avdt_ccb_event(p_ccb, avdt_event, (tAVDT_CCB_EVT *)&err_code); |
| } |
| |
| void avdt_ccb_rsp_ccb_timer_timeout(void *data) |
| { |
| tAVDT_CCB *p_ccb = (tAVDT_CCB *)data; |
| uint8_t avdt_event = AVDT_CCB_RSP_TOUT_EVT; |
| uint8_t err_code = AVDT_ERR_TIMEOUT; |
| |
| avdt_ccb_event(p_ccb, avdt_event, (tAVDT_CCB_EVT *)&err_code); |
| } |
| |
| void avdt_scb_transport_channel_timer_timeout(void *data) |
| { |
| tAVDT_SCB *p_scb = (tAVDT_SCB *)data; |
| uint8_t avdt_event = AVDT_SCB_TC_TOUT_EVT; |
| |
| avdt_scb_event(p_scb, avdt_event, NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_Register |
| ** |
| ** Description This is the system level registration function for the |
| ** AVDTP protocol. This function initializes AVDTP and |
| ** prepares the protocol stack for its use. This function |
| ** must be called once by the system or platform using AVDTP |
| ** before the other functions of the API an be used. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void AVDT_Register(tAVDT_REG *p_reg, tAVDT_CTRL_CBACK *p_cback) |
| { |
| /* register PSM with L2CAP */ |
| L2CA_Register(AVDT_PSM, (tL2CAP_APPL_INFO *) &avdt_l2c_appl); |
| |
| /* set security level */ |
| BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVDTP, p_reg->sec_mask, |
| AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_SIG); |
| BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVDTP, p_reg->sec_mask, |
| AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_SIG); |
| |
| /* do not use security on the media channel */ |
| BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVDTP_NOSEC, BTM_SEC_NONE, |
| AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_MEDIA); |
| BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVDTP_NOSEC, BTM_SEC_NONE, |
| AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_MEDIA); |
| |
| #if AVDT_REPORTING == TRUE |
| /* do not use security on the reporting channel */ |
| BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVDTP_NOSEC, BTM_SEC_NONE, |
| AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_REPORT); |
| BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVDTP_NOSEC, BTM_SEC_NONE, |
| AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_REPORT); |
| #endif |
| |
| /* initialize AVDTP data structures */ |
| avdt_scb_init(); |
| avdt_ccb_init(); |
| avdt_ad_init(); |
| |
| /* copy registration struct */ |
| memcpy(&avdt_cb.rcb, p_reg, sizeof(tAVDT_REG)); |
| avdt_cb.p_conn_cback = p_cback; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_Deregister |
| ** |
| ** Description This function is called to deregister use AVDTP protocol. |
| ** It is called when AVDTP is no longer being used by any |
| ** application in the system. Before this function can be |
| ** called, all streams must be removed with AVDT_RemoveStream(). |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void AVDT_Deregister(void) |
| { |
| /* deregister PSM with L2CAP */ |
| L2CA_Deregister(AVDT_PSM); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_SINK_Activate |
| ** |
| ** Description Activate SEP of A2DP Sink. In Use parameter is adjusted. |
| ** In Use will be made false in case of activation. A2DP SRC |
| ** will receive in_use as false and can open A2DP Sink |
| ** connection |
| ** |
| ** Returns void. |
| ** |
| *******************************************************************************/ |
| void AVDT_SINK_Activate() |
| { |
| tAVDT_SCB *p_scb = &avdt_cb.scb[0]; |
| int i; |
| AVDT_TRACE_DEBUG("AVDT_SINK_Activate"); |
| /* for all allocated scbs */ |
| for (i = 0; i < AVDT_NUM_SEPS; i++, p_scb++) |
| { |
| if ((p_scb->allocated) && (p_scb->cs.tsep == AVDT_TSEP_SNK)) |
| { |
| AVDT_TRACE_DEBUG("AVDT_SINK_Activate found scb"); |
| /* update in_use */ |
| p_scb->in_use = FALSE; |
| break; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_SINK_Deactivate |
| ** |
| ** Description Deactivate SEP of A2DP Sink. In Use parameter is adjusted. |
| ** In Use will be made TRUE in case of activation. A2DP SRC |
| ** will receive in_use as true and will not open A2DP Sink |
| ** connection |
| ** |
| ** Returns void. |
| ** |
| *******************************************************************************/ |
| void AVDT_SINK_Deactivate() |
| { |
| tAVDT_SCB *p_scb = &avdt_cb.scb[0]; |
| int i; |
| AVDT_TRACE_DEBUG("AVDT_SINK_Deactivate"); |
| /* for all allocated scbs */ |
| for (i = 0; i < AVDT_NUM_SEPS; i++, p_scb++) |
| { |
| if ((p_scb->allocated) && (p_scb->cs.tsep == AVDT_TSEP_SNK)) |
| { |
| AVDT_TRACE_DEBUG("AVDT_SINK_Deactivate, found scb"); |
| /* update in_use */ |
| p_scb->in_use = TRUE; |
| break; |
| } |
| } |
| } |
| |
| void AVDT_AbortReq(UINT8 handle) |
| { |
| AVDT_TRACE_ERROR("%s", __func__); |
| |
| tAVDT_SCB *p_scb = avdt_scb_by_hdl(handle); |
| if (p_scb != NULL) |
| { |
| avdt_scb_event(p_scb, AVDT_SCB_API_ABORT_REQ_EVT, NULL); |
| } else { |
| AVDT_TRACE_ERROR("%s Improper SCB, can not abort the stream", __func__); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_CreateStream |
| ** |
| ** Description Create a stream endpoint. After a stream endpoint is |
| ** created an application can initiate a connection between |
| ** this endpoint and an endpoint on a peer device. In |
| ** addition, a peer device can discover, get the capabilities, |
| ** and connect to this endpoint. |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_CreateStream(UINT8 *p_handle, tAVDT_CS *p_cs) |
| { |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_SCB *p_scb; |
| |
| /* Verify parameters; if invalid, return failure */ |
| if (((p_cs->cfg.psc_mask & (~AVDT_PSC)) != 0) || (p_cs->p_ctrl_cback == NULL)) |
| { |
| result = AVDT_BAD_PARAMS; |
| } |
| /* Allocate scb; if no scbs, return failure */ |
| else if ((p_scb = avdt_scb_alloc(p_cs)) == NULL) |
| { |
| result = AVDT_NO_RESOURCES; |
| } |
| else |
| { |
| *p_handle = avdt_scb_to_hdl(p_scb); |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_RemoveStream |
| ** |
| ** Description Remove a stream endpoint. This function is called when |
| ** the application is no longer using a stream endpoint. |
| ** If this function is called when the endpoint is connected |
| ** the connection is closed and then the stream endpoint |
| ** is removed. |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_RemoveStream(UINT8 handle) |
| { |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_SCB *p_scb; |
| |
| /* look up scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| else |
| { |
| /* send remove event to scb */ |
| avdt_scb_event(p_scb, AVDT_SCB_API_REMOVE_EVT, NULL); |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_DiscoverReq |
| ** |
| ** Description This function initiates a connection to the AVDTP service |
| ** on the peer device, if not already present, and discovers |
| ** the stream endpoints on the peer device. (Please note |
| ** that AVDTP discovery is unrelated to SDP discovery). |
| ** This function can be called at any time regardless of whether |
| ** there is an AVDTP connection to the peer device. |
| ** |
| ** When discovery is complete, an AVDT_DISCOVER_CFM_EVT |
| ** is sent to the application via its callback function. |
| ** The application must not call AVDT_GetCapReq() or |
| ** AVDT_DiscoverReq() again to the same device until |
| ** discovery is complete. |
| ** |
| ** The memory addressed by sep_info is allocated by the |
| ** application. This memory is written to by AVDTP as part |
| ** of the discovery procedure. This memory must remain |
| ** accessible until the application receives the |
| ** AVDT_DISCOVER_CFM_EVT. |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_DiscoverReq(BD_ADDR bd_addr, tAVDT_SEP_INFO *p_sep_info, |
| UINT8 max_seps, tAVDT_CTRL_CBACK *p_cback) |
| { |
| tAVDT_CCB *p_ccb; |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_CCB_EVT evt; |
| |
| /* find channel control block for this bd addr; if none, allocate one */ |
| if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL) |
| { |
| if ((p_ccb = avdt_ccb_alloc(bd_addr)) == NULL) |
| { |
| /* could not allocate channel control block */ |
| result = AVDT_NO_RESOURCES; |
| } |
| } |
| |
| if (result == AVDT_SUCCESS) |
| { |
| /* make sure no discovery or get capabilities req already in progress */ |
| if (p_ccb->proc_busy) |
| { |
| result = AVDT_BUSY; |
| } |
| /* send event to ccb */ |
| else |
| { |
| evt.discover.p_sep_info = p_sep_info; |
| evt.discover.num_seps = max_seps; |
| evt.discover.p_cback = p_cback; |
| avdt_ccb_event(p_ccb, AVDT_CCB_API_DISCOVER_REQ_EVT, &evt); |
| } |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function avdt_get_cap_req |
| ** |
| ** Description internal function to serve both AVDT_GetCapReq and |
| ** AVDT_GetAllCapReq |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| static UINT16 avdt_get_cap_req(BD_ADDR bd_addr, tAVDT_CCB_API_GETCAP *p_evt) |
| { |
| tAVDT_CCB *p_ccb = NULL; |
| UINT16 result = AVDT_SUCCESS; |
| |
| /* verify SEID */ |
| if ((p_evt->single.seid < AVDT_SEID_MIN) || (p_evt->single.seid > AVDT_SEID_MAX)) |
| { |
| AVDT_TRACE_ERROR("seid: %d", p_evt->single.seid); |
| result = AVDT_BAD_PARAMS; |
| } |
| /* find channel control block for this bd addr; if none, allocate one */ |
| else if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL) |
| { |
| if ((p_ccb = avdt_ccb_alloc(bd_addr)) == NULL) |
| { |
| /* could not allocate channel control block */ |
| result = AVDT_NO_RESOURCES; |
| } |
| } |
| |
| if (result == AVDT_SUCCESS) |
| { |
| /* make sure no discovery or get capabilities req already in progress */ |
| if (p_ccb->proc_busy) |
| { |
| result = AVDT_BUSY; |
| } |
| /* send event to ccb */ |
| else |
| { |
| avdt_ccb_event(p_ccb, AVDT_CCB_API_GETCAP_REQ_EVT, (tAVDT_CCB_EVT *)p_evt); |
| } |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_GetCapReq |
| ** |
| ** Description This function initiates a connection to the AVDTP service |
| ** on the peer device, if not already present, and gets the |
| ** capabilities of a stream endpoint on the peer device. |
| ** This function can be called at any time regardless of |
| ** whether there is an AVDTP connection to the peer device. |
| ** |
| ** When the procedure is complete, an AVDT_GETCAP_CFM_EVT is |
| ** sent to the application via its callback function. The |
| ** application must not call AVDT_GetCapReq() or |
| ** AVDT_DiscoverReq() again until the procedure is complete. |
| ** |
| ** The memory pointed to by p_cfg is allocated by the |
| ** application. This memory is written to by AVDTP as part |
| ** of the get capabilities procedure. This memory must |
| ** remain accessible until the application receives |
| ** the AVDT_GETCAP_CFM_EVT. |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_GetCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback) |
| { |
| tAVDT_CCB_API_GETCAP getcap; |
| |
| getcap.single.seid = seid; |
| getcap.single.sig_id = AVDT_SIG_GETCAP; |
| getcap.p_cfg = p_cfg; |
| getcap.p_cback = p_cback; |
| return avdt_get_cap_req (bd_addr, &getcap); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_GetAllCapReq |
| ** |
| ** Description This function initiates a connection to the AVDTP service |
| ** on the peer device, if not already present, and gets the |
| ** capabilities of a stream endpoint on the peer device. |
| ** This function can be called at any time regardless of |
| ** whether there is an AVDTP connection to the peer device. |
| ** |
| ** When the procedure is complete, an AVDT_GETCAP_CFM_EVT is |
| ** sent to the application via its callback function. The |
| ** application must not call AVDT_GetCapReq() or |
| ** AVDT_DiscoverReq() again until the procedure is complete. |
| ** |
| ** The memory pointed to by p_cfg is allocated by the |
| ** application. This memory is written to by AVDTP as part |
| ** of the get capabilities procedure. This memory must |
| ** remain accessible until the application receives |
| ** the AVDT_GETCAP_CFM_EVT. |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_GetAllCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback) |
| { |
| tAVDT_CCB_API_GETCAP getcap; |
| |
| getcap.single.seid = seid; |
| getcap.single.sig_id = AVDT_SIG_GET_ALLCAP; |
| getcap.p_cfg = p_cfg; |
| getcap.p_cback = p_cback; |
| return avdt_get_cap_req (bd_addr, &getcap); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_DelayReport |
| ** |
| ** Description This functions sends a Delay Report to the peer device |
| ** that is associated with a particular SEID. |
| ** This function is called by SNK device. |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_DelayReport(UINT8 handle, UINT8 seid, UINT16 delay) |
| { |
| tAVDT_SCB *p_scb; |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_SCB_EVT evt; |
| |
| /* map handle to scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| else |
| /* send event to scb */ |
| { |
| evt.apidelay.hdr.seid = seid; |
| evt.apidelay.delay = delay; |
| avdt_scb_event(p_scb, AVDT_SCB_API_DELAY_RPT_REQ_EVT, &evt); |
| } |
| |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_OpenReq |
| ** |
| ** Description This function initiates a connection to the AVDTP service |
| ** on the peer device, if not already present, and connects |
| ** to a stream endpoint on a peer device. When the connection |
| ** is completed, an AVDT_OPEN_CFM_EVT is sent to the |
| ** application via the control callback function for this handle. |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_OpenReq(UINT8 handle, BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg) |
| { |
| tAVDT_CCB *p_ccb = NULL; |
| tAVDT_SCB *p_scb = NULL; |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_SCB_EVT evt; |
| |
| /* verify SEID */ |
| if ((seid < AVDT_SEID_MIN) || (seid > AVDT_SEID_MAX)) |
| { |
| result = AVDT_BAD_PARAMS; |
| } |
| /* map handle to scb */ |
| else if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| /* find channel control block for this bd addr; if none, allocate one */ |
| else if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL) |
| { |
| if ((p_ccb = avdt_ccb_alloc(bd_addr)) == NULL) |
| { |
| /* could not allocate channel control block */ |
| result = AVDT_NO_RESOURCES; |
| } |
| } |
| |
| /* send event to scb */ |
| if (result == AVDT_SUCCESS) |
| { |
| evt.msg.config_cmd.hdr.seid = seid; |
| evt.msg.config_cmd.hdr.ccb_idx = avdt_ccb_to_idx(p_ccb); |
| evt.msg.config_cmd.int_seid = handle; |
| evt.msg.config_cmd.p_cfg = p_cfg; |
| avdt_scb_event(p_scb, AVDT_SCB_API_SETCONFIG_REQ_EVT, &evt); |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_ConfigRsp |
| ** |
| ** Description Respond to a configure request from the peer device. This |
| ** function must be called if the application receives an |
| ** AVDT_CONFIG_IND_EVT through its control callback. |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_ConfigRsp(UINT8 handle, UINT8 label, UINT8 error_code, UINT8 category) |
| { |
| tAVDT_SCB *p_scb; |
| tAVDT_SCB_EVT evt; |
| UINT16 result = AVDT_SUCCESS; |
| UINT8 event_code; |
| |
| /* map handle to scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| /* handle special case when this function is called but peer has not send |
| ** a configuration cmd; ignore and return error result |
| */ |
| else if (!p_scb->in_use) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| /* send event to scb */ |
| else |
| { |
| evt.msg.hdr.err_code = error_code; |
| evt.msg.hdr.err_param = category; |
| evt.msg.hdr.label = label; |
| if (error_code == 0) |
| { |
| event_code = AVDT_SCB_API_SETCONFIG_RSP_EVT; |
| } |
| else |
| { |
| event_code = AVDT_SCB_API_SETCONFIG_REJ_EVT; |
| } |
| avdt_scb_event(p_scb, event_code, &evt); |
| } |
| |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_StartReq |
| ** |
| ** Description Start one or more stream endpoints. This initiates the |
| ** transfer of media packets for the streams. All stream |
| ** endpoints must previously be opened. When the streams |
| ** are started, an AVDT_START_CFM_EVT is sent to the |
| ** application via the control callback function for each stream. |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_StartReq(UINT8 *p_handles, UINT8 num_handles) |
| { |
| tAVDT_SCB *p_scb = NULL; |
| tAVDT_CCB_EVT evt; |
| UINT16 result = AVDT_SUCCESS; |
| int i; |
| |
| if ((num_handles == 0) || (num_handles > AVDT_NUM_SEPS)) |
| { |
| result = AVDT_BAD_PARAMS; |
| } |
| else |
| { |
| /* verify handles */ |
| for (i = 0; i < num_handles; i++) |
| { |
| if ((p_scb = avdt_scb_by_hdl(p_handles[i])) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| break; |
| } |
| } |
| } |
| |
| if (result == AVDT_SUCCESS) |
| { |
| if (p_scb->p_ccb == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| else |
| { |
| /* send event to ccb */ |
| memcpy(evt.msg.multi.seid_list, p_handles, num_handles); |
| evt.msg.multi.num_seps = num_handles; |
| avdt_ccb_event(p_scb->p_ccb, AVDT_CCB_API_START_REQ_EVT, &evt); |
| } |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_SuspendReq |
| ** |
| ** Description Suspend one or more stream endpoints. This suspends the |
| ** transfer of media packets for the streams. All stream |
| ** endpoints must previously be open and started. When the |
| ** streams are suspended, an AVDT_SUSPEND_CFM_EVT is sent to |
| ** the application via the control callback function for |
| ** each stream. |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_SuspendReq(UINT8 *p_handles, UINT8 num_handles) |
| { |
| tAVDT_SCB *p_scb = NULL; |
| tAVDT_CCB_EVT evt; |
| UINT16 result = AVDT_SUCCESS; |
| int i; |
| |
| if ((num_handles == 0) || (num_handles > AVDT_NUM_SEPS)) |
| { |
| result = AVDT_BAD_PARAMS; |
| } |
| else |
| { |
| /* verify handles */ |
| for (i = 0; i < num_handles; i++) |
| { |
| if ((p_scb = avdt_scb_by_hdl(p_handles[i])) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| break; |
| } |
| } |
| } |
| |
| if (result == AVDT_SUCCESS) |
| { |
| if (p_scb->p_ccb == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| else |
| { |
| /* send event to ccb */ |
| memcpy(evt.msg.multi.seid_list, p_handles, num_handles); |
| evt.msg.multi.num_seps = num_handles; |
| avdt_ccb_event(p_scb->p_ccb, AVDT_CCB_API_SUSPEND_REQ_EVT, &evt); |
| } |
| } |
| |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_CloseReq |
| ** |
| ** Description Close a stream endpoint. This stops the transfer of media |
| ** packets and closes the transport channel associated with |
| ** this stream endpoint. When the stream is closed, an |
| ** AVDT_CLOSE_CFM_EVT is sent to the application via the |
| ** control callback function for this handle. |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_CloseReq(UINT8 handle) |
| { |
| tAVDT_SCB *p_scb; |
| UINT16 result = AVDT_SUCCESS; |
| |
| /* map handle to scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| else |
| /* send event to scb */ |
| { |
| avdt_scb_event(p_scb, AVDT_SCB_API_CLOSE_REQ_EVT, NULL); |
| } |
| |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_ReconfigReq |
| ** |
| ** Description Reconfigure a stream endpoint. This allows the application |
| ** to change the codec or content protection capabilities of |
| ** a stream endpoint after it has been opened. This function |
| ** can only be called if the stream is opened but not started |
| ** or if the stream has been suspended. When the procedure |
| ** is completed, an AVDT_RECONFIG_CFM_EVT is sent to the |
| ** application via the control callback function for this handle. |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_ReconfigReq(UINT8 handle, tAVDT_CFG *p_cfg) |
| { |
| tAVDT_SCB *p_scb; |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_SCB_EVT evt; |
| |
| /* map handle to scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| /* send event to scb */ |
| else |
| { |
| /* force psc_mask to zero */ |
| p_cfg->psc_mask = 0; |
| |
| evt.msg.reconfig_cmd.p_cfg = p_cfg; |
| avdt_scb_event(p_scb, AVDT_SCB_API_RECONFIG_REQ_EVT, &evt); |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_ReconfigRsp |
| ** |
| ** Description Respond to a reconfigure request from the peer device. |
| ** This function must be called if the application receives |
| ** an AVDT_RECONFIG_IND_EVT through its control callback. |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_ReconfigRsp(UINT8 handle, UINT8 label, UINT8 error_code, UINT8 category) |
| { |
| tAVDT_SCB *p_scb; |
| tAVDT_SCB_EVT evt; |
| UINT16 result = AVDT_SUCCESS; |
| |
| /* map handle to scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| /* send event to scb */ |
| else |
| { |
| evt.msg.hdr.err_code = error_code; |
| evt.msg.hdr.err_param = category; |
| evt.msg.hdr.label = label; |
| avdt_scb_event(p_scb, AVDT_SCB_API_RECONFIG_RSP_EVT, &evt); |
| } |
| |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_SecurityReq |
| ** |
| ** Description Send a security request to the peer device. When the |
| ** security procedure is completed, an AVDT_SECURITY_CFM_EVT |
| ** is sent to the application via the control callback function |
| ** for this handle. (Please note that AVDTP security procedures |
| ** are unrelated to Bluetooth link level security.) |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_SecurityReq(UINT8 handle, UINT8 *p_data, UINT16 len) |
| { |
| tAVDT_SCB *p_scb; |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_SCB_EVT evt; |
| |
| /* map handle to scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| /* send event to scb */ |
| else |
| { |
| evt.msg.security_rsp.p_data = p_data; |
| evt.msg.security_rsp.len = len; |
| avdt_scb_event(p_scb, AVDT_SCB_API_SECURITY_REQ_EVT, &evt); |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_SecurityRsp |
| ** |
| ** Description Respond to a security request from the peer device. |
| ** This function must be called if the application receives |
| ** an AVDT_SECURITY_IND_EVT through its control callback. |
| ** (Please note that AVDTP security procedures are unrelated |
| ** to Bluetooth link level security.) |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_SecurityRsp(UINT8 handle, UINT8 label, UINT8 error_code, |
| UINT8 *p_data, UINT16 len) |
| { |
| tAVDT_SCB *p_scb; |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_SCB_EVT evt; |
| |
| /* map handle to scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| /* send event to scb */ |
| else |
| { |
| evt.msg.security_rsp.hdr.err_code = error_code; |
| evt.msg.security_rsp.hdr.label = label; |
| evt.msg.security_rsp.p_data = p_data; |
| evt.msg.security_rsp.len = len; |
| avdt_scb_event(p_scb, AVDT_SCB_API_SECURITY_RSP_EVT, &evt); |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_WriteReqOpt |
| ** |
| ** Description Send a media packet to the peer device. The stream must |
| ** be started before this function is called. Also, this |
| ** function can only be called if the stream is a SRC. |
| ** |
| ** When AVDTP has sent the media packet and is ready for the |
| ** next packet, an AVDT_WRITE_CFM_EVT is sent to the |
| ** application via the control callback. The application must |
| ** wait for the AVDT_WRITE_CFM_EVT before it makes the next |
| ** call to AVDT_WriteReq(). If the applications calls |
| ** AVDT_WriteReq() before it receives the event the packet |
| ** will not be sent. The application may make its first call |
| ** to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT |
| ** or AVDT_START_IND_EVT. |
| ** |
| ** The application passes the packet using the BT_HDR structure. |
| ** This structure is described in section 2.1. The offset |
| ** field must be equal to or greater than AVDT_MEDIA_OFFSET |
| ** (if NO_RTP is specified, L2CAP_MIN_OFFSET can be used). |
| ** This allows enough space in the buffer for the L2CAP and |
| ** AVDTP headers. |
| ** |
| ** The memory pointed to by p_pkt must be a GKI buffer |
| ** allocated by the application. This buffer will be freed |
| ** by the protocol stack; the application must not free |
| ** this buffer. |
| ** |
| ** The opt parameter allows passing specific options like: |
| ** - NO_RTP : do not add the RTP header to buffer |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_WriteReqOpt(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp, UINT8 m_pt, tAVDT_DATA_OPT_MASK opt) |
| { |
| tAVDT_SCB *p_scb; |
| tAVDT_SCB_EVT evt; |
| UINT16 result = AVDT_SUCCESS; |
| |
| /* map handle to scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| else |
| { |
| evt.apiwrite.p_buf = p_pkt; |
| evt.apiwrite.time_stamp = time_stamp; |
| evt.apiwrite.m_pt = m_pt; |
| evt.apiwrite.opt = opt; |
| avdt_scb_event(p_scb, AVDT_SCB_API_WRITE_REQ_EVT, &evt); |
| } |
| |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_WriteReq |
| ** |
| ** Description Send a media packet to the peer device. The stream must |
| ** be started before this function is called. Also, this |
| ** function can only be called if the stream is a SRC. |
| ** |
| ** When AVDTP has sent the media packet and is ready for the |
| ** next packet, an AVDT_WRITE_CFM_EVT is sent to the |
| ** application via the control callback. The application must |
| ** wait for the AVDT_WRITE_CFM_EVT before it makes the next |
| ** call to AVDT_WriteReq(). If the applications calls |
| ** AVDT_WriteReq() before it receives the event the packet |
| ** will not be sent. The application may make its first call |
| ** to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT |
| ** or AVDT_START_IND_EVT. |
| ** |
| ** The application passes the packet using the BT_HDR structure. |
| ** This structure is described in section 2.1. The offset |
| ** field must be equal to or greater than AVDT_MEDIA_OFFSET. |
| ** This allows enough space in the buffer for the L2CAP and |
| ** AVDTP headers. |
| ** |
| ** The memory pointed to by p_pkt must be a GKI buffer |
| ** allocated by the application. This buffer will be freed |
| ** by the protocol stack; the application must not free |
| ** this buffer. |
| ** |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_WriteReq(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp, UINT8 m_pt) |
| { |
| return AVDT_WriteReqOpt(handle, p_pkt, time_stamp, m_pt, AVDT_DATA_OPT_NONE); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_ConnectReq |
| ** |
| ** Description This function initiates an AVDTP signaling connection |
| ** to the peer device. When the connection is completed, an |
| ** AVDT_CONNECT_IND_EVT is sent to the application via its |
| ** control callback function. If the connection attempt fails |
| ** an AVDT_DISCONNECT_IND_EVT is sent. The security mask |
| ** parameter overrides the outgoing security mask set in |
| ** AVDT_Register(). |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_ConnectReq(BD_ADDR bd_addr, UINT8 sec_mask, tAVDT_CTRL_CBACK *p_cback) |
| { |
| tAVDT_CCB *p_ccb = NULL; |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_CCB_EVT evt; |
| |
| /* find channel control block for this bd addr; if none, allocate one */ |
| if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL) |
| { |
| if ((p_ccb = avdt_ccb_alloc(bd_addr)) == NULL) |
| { |
| /* could not allocate channel control block */ |
| result = AVDT_NO_RESOURCES; |
| } |
| } |
| else if (p_ccb->ll_opened == FALSE) |
| { |
| AVDT_TRACE_WARNING("AVDT_ConnectReq: CCB LL is in the middle of opening"); |
| |
| /* ccb was already allocated for the incoming signalling. */ |
| result = AVDT_BUSY; |
| } |
| |
| if (result == AVDT_SUCCESS) |
| { |
| /* send event to ccb */ |
| evt.connect.p_cback = p_cback; |
| evt.connect.sec_mask = sec_mask; |
| avdt_ccb_event(p_ccb, AVDT_CCB_API_CONNECT_REQ_EVT, &evt); |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_DisconnectReq |
| ** |
| ** Description This function disconnect an AVDTP signaling connection |
| ** to the peer device. When disconnected an |
| ** AVDT_DISCONNECT_IND_EVT is sent to the application via its |
| ** control callback function. |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_DisconnectReq(BD_ADDR bd_addr, tAVDT_CTRL_CBACK *p_cback) |
| { |
| tAVDT_CCB *p_ccb = NULL; |
| UINT16 result = AVDT_SUCCESS; |
| tAVDT_CCB_EVT evt; |
| |
| /* find channel control block for this bd addr; if none, error */ |
| if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL) |
| { |
| result = AVDT_BAD_PARAMS; |
| } |
| |
| if (result == AVDT_SUCCESS) |
| { |
| /* send event to ccb */ |
| evt.disconnect.p_cback = p_cback; |
| avdt_ccb_event(p_ccb, AVDT_CCB_API_DISCONNECT_REQ_EVT, &evt); |
| } |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_GetL2CapChannel |
| ** |
| ** Description Get the L2CAP CID used by the handle. |
| ** |
| ** Returns CID if successful, otherwise 0. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_GetL2CapChannel(UINT8 handle) |
| { |
| tAVDT_SCB *p_scb; |
| tAVDT_CCB *p_ccb; |
| UINT8 tcid; |
| UINT16 lcid = 0; |
| |
| /* map handle to scb */ |
| if (((p_scb = avdt_scb_by_hdl(handle)) != NULL) |
| && ((p_ccb = p_scb->p_ccb) != NULL)) |
| { |
| /* get tcid from type, scb */ |
| tcid = avdt_ad_type_to_tcid(AVDT_CHAN_MEDIA, p_scb); |
| |
| lcid = avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid; |
| } |
| |
| return (lcid); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function AVDT_GetSignalChannel |
| ** |
| ** Description Get the L2CAP CID used by the signal channel of the given handle. |
| ** |
| ** Returns CID if successful, otherwise 0. |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_GetSignalChannel(UINT8 handle, BD_ADDR bd_addr) |
| { |
| tAVDT_SCB *p_scb; |
| tAVDT_CCB *p_ccb; |
| UINT8 tcid = 0; /* tcid is always 0 for signal channel */ |
| UINT16 lcid = 0; |
| |
| /* map handle to scb */ |
| if (((p_scb = avdt_scb_by_hdl(handle)) != NULL) |
| && ((p_ccb = p_scb->p_ccb) != NULL)) |
| { |
| lcid = avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid; |
| } |
| else if ((p_ccb = avdt_ccb_by_bd(bd_addr)) != NULL) |
| { |
| lcid = avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid; |
| } |
| |
| return (lcid); |
| } |
| |
| #if AVDT_MULTIPLEXING == TRUE |
| /******************************************************************************* |
| ** |
| ** Function AVDT_SetMediaBuf |
| ** |
| ** Description Assigns buffer for media packets or forbids using of assigned |
| ** buffer if argument p_buf is NULL. This function can only |
| ** be called if the stream is a SNK. |
| ** |
| ** AVDTP uses this buffer to reassemble fragmented media packets. |
| ** When AVDTP receives a complete media packet, it calls the |
| ** p_media_cback assigned by AVDT_CreateStream(). |
| ** This function can be called during callback to assign a |
| ** different buffer for next media packet or can leave the current |
| ** buffer for next packet. |
| ** |
| ** Returns AVDT_SUCCESS if successful, otherwise error. |
| ** |
| *******************************************************************************/ |
| extern UINT16 AVDT_SetMediaBuf(UINT8 handle, UINT8 *p_buf, UINT32 buf_len) |
| { |
| tAVDT_SCB *p_scb; |
| UINT16 result = AVDT_SUCCESS; |
| |
| /* map handle to scb */ |
| if ((p_scb = avdt_scb_by_hdl(handle)) == NULL) |
| { |
| result = AVDT_BAD_HANDLE; |
| } |
| else |
| { |
| if(p_buf && p_scb->cs.p_media_cback == NULL) |
| result = AVDT_NO_RESOURCES; |
| else |
| { |
| p_scb->p_media_buf = p_buf; |
| p_scb->media_buf_len = buf_len; |
| } |
| } |
| |
| return result; |
| } |
| #endif |
| |
| #if AVDT_REPORTING == TRUE |
| /******************************************************************************* |
| ** |
| ** Function AVDT_SendReport |
| ** |
| ** Description |
| ** |
| ** |
| ** |
| ** Returns |
| ** |
| *******************************************************************************/ |
| UINT16 AVDT_SendReport(UINT8 handle, AVDT_REPORT_TYPE type, |
| tAVDT_REPORT_DATA *p_data) |
| { |
| tAVDT_SCB *p_scb; |
| UINT16 result = AVDT_BAD_PARAMS; |
| tAVDT_TC_TBL *p_tbl; |
| UINT8 *p, *plen, *pm1, *p_end; |
| #if AVDT_MULTIPLEXING == TRUE |
| UINT8 *p_al=NULL, u; |
| #endif |
| UINT32 ssrc; |
| UINT16 len; |
| |
| /* map handle to scb && verify parameters */ |
| if (((p_scb = avdt_scb_by_hdl(handle)) != NULL) |
| && (p_scb->p_ccb != NULL) |
| && (((type == AVDT_RTCP_PT_SR) && (p_scb->cs.tsep == AVDT_TSEP_SRC)) || |
| ((type == AVDT_RTCP_PT_RR) && (p_scb->cs.tsep == AVDT_TSEP_SNK)) || |
| (type == AVDT_RTCP_PT_SDES)) ) |
| { |
| result = AVDT_NO_RESOURCES; |
| |
| /* build SR - assume fit in one packet */ |
| p_tbl = avdt_ad_tc_tbl_by_type(AVDT_CHAN_REPORT, p_scb->p_ccb, p_scb); |
| if (p_tbl->state == AVDT_AD_ST_OPEN) { |
| BT_HDR *p_pkt = (BT_HDR *)osi_malloc(p_tbl->peer_mtu + sizeof(BT_HDR)); |
| |
| p_pkt->offset = L2CAP_MIN_OFFSET; |
| p = (UINT8 *)(p_pkt + 1) + p_pkt->offset; |
| #if AVDT_MULTIPLEXING == TRUE |
| if(p_scb->curr_cfg.psc_mask & AVDT_PSC_MUX) |
| { |
| /* Adaptation Layer header later */ |
| p_al = p; |
| p += 2; |
| } |
| #endif |
| pm1 = p; |
| *p++ = AVDT_MEDIA_OCTET1 | 1; |
| *p++ = type; |
| /* save the location for length */ |
| plen = p; |
| p+= 2; |
| ssrc = avdt_scb_gen_ssrc(p_scb); |
| UINT32_TO_BE_STREAM(p, ssrc); |
| |
| switch(type) |
| { |
| case AVDT_RTCP_PT_SR: /* Sender Report */ |
| *pm1 = AVDT_MEDIA_OCTET1; |
| UINT32_TO_BE_STREAM(p, p_data->sr.ntp_sec); |
| UINT32_TO_BE_STREAM(p, p_data->sr.ntp_frac); |
| UINT32_TO_BE_STREAM(p, p_data->sr.rtp_time); |
| UINT32_TO_BE_STREAM(p, p_data->sr.pkt_count); |
| UINT32_TO_BE_STREAM(p, p_data->sr.octet_count); |
| break; |
| |
| case AVDT_RTCP_PT_RR: /* Receiver Report */ |
| *p++ = p_data->rr.frag_lost; |
| AVDT_TRACE_API("packet_lost: %d", p_data->rr.packet_lost); |
| p_data->rr.packet_lost &= 0xFFFFFF; |
| AVDT_TRACE_API("packet_lost: %d", p_data->rr.packet_lost); |
| UINT24_TO_BE_STREAM(p, p_data->rr.packet_lost); |
| UINT32_TO_BE_STREAM(p, p_data->rr.seq_num_rcvd); |
| UINT32_TO_BE_STREAM(p, p_data->rr.jitter); |
| UINT32_TO_BE_STREAM(p, p_data->rr.lsr); |
| UINT32_TO_BE_STREAM(p, p_data->rr.dlsr); |
| break; |
| |
| case AVDT_RTCP_PT_SDES: /* Source Description */ |
| *p++ = AVDT_RTCP_SDES_CNAME; |
| len = strlen((char *)p_data->cname); |
| if(len > AVDT_MAX_CNAME_SIZE) |
| len = AVDT_MAX_CNAME_SIZE; |
| *p++ = (UINT8)len; |
| strlcpy((char *)p, (char *)p_data->cname, len+1); |
| p += len; |
| break; |
| } |
| p_end = p; |
| len = p - pm1 - 1; |
| UINT16_TO_BE_STREAM(plen, len); |
| |
| #if AVDT_MULTIPLEXING == TRUE |
| if(p_scb->curr_cfg.psc_mask & AVDT_PSC_MUX) |
| { |
| /* Adaptation Layer header */ |
| p = p_al; |
| len++; |
| UINT16_TO_BE_STREAM(p_al, len ); |
| /* TSID, no-fragment bit and coding of length(9-bit length field) */ |
| u = *p; |
| *p = (p_scb->curr_cfg.mux_tsid_report<<3) | AVDT_ALH_LCODE_9BITM0; |
| if(u) |
| *p |= AVDT_ALH_LCODE_9BITM1; |
| } |
| #endif |
| |
| /* set the actual payload length */ |
| p_pkt->len = p_end - p; |
| /* send the packet */ |
| if(L2CAP_DW_FAILED != avdt_ad_write_req(AVDT_CHAN_REPORT, p_scb->p_ccb, p_scb, p_pkt)) |
| result = AVDT_SUCCESS; |
| } |
| } |
| |
| return result; |
| } |
| #endif |
| |
| /****************************************************************************** |
| ** |
| ** Function AVDT_SetTraceLevel |
| ** |
| ** Description Sets the trace level for AVDT. If 0xff is passed, the |
| ** current trace level is returned. |
| ** |
| ** Input Parameters: |
| ** new_level: The level to set the AVDT tracing to: |
| ** 0xff-returns the current setting. |
| ** 0-turns off tracing. |
| ** >= 1-Errors. |
| ** >= 2-Warnings. |
| ** >= 3-APIs. |
| ** >= 4-Events. |
| ** >= 5-Debug. |
| ** |
| ** Returns The new trace level or current trace level if |
| ** the input parameter is 0xff. |
| ** |
| ******************************************************************************/ |
| UINT8 AVDT_SetTraceLevel (UINT8 new_level) |
| { |
| if (new_level != 0xFF) |
| avdt_cb.trace_level = new_level; |
| |
| return (avdt_cb.trace_level); |
| } |