| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #ifndef BT_TYPES_H |
| #define BT_TYPES_H |
| |
| #include <stdbool.h> |
| #include <stdint.h> |
| |
| #ifndef FALSE |
| #define FALSE false |
| #endif |
| |
| #ifndef TRUE |
| #define TRUE true |
| #endif |
| |
| #ifdef __arm |
| #define PACKED __packed |
| #define INLINE __inline |
| #else |
| #define PACKED |
| #define INLINE |
| #endif |
| |
| /* READ WELL !! |
| * |
| * This section defines global events. These are events that cross layers. |
| * Any event that passes between layers MUST be one of these events. Tasks |
| * can use their own events internally, but a FUNDAMENTAL design issue is |
| * that global events MUST be one of these events defined below. |
| * |
| * The convention used is the the event name contains the layer that the |
| * event is going to. |
| */ |
| #define BT_EVT_MASK 0xFF00 |
| #define BT_SUB_EVT_MASK 0x00FF |
| /* To Bluetooth Upper Layers */ |
| /************************************/ |
| /* L2CAP event */ |
| #define BT_EVT_TO_BTU_L2C_EVT 0x0900 |
| /* HCI Event */ |
| #define BT_EVT_TO_BTU_HCI_EVT 0x1000 |
| /* event from BR/EDR controller */ |
| #define BT_EVT_TO_BTU_HCI_BR_EDR_EVT (0x0000 | BT_EVT_TO_BTU_HCI_EVT) |
| /* event from local AMP 1 controller */ |
| #define BT_EVT_TO_BTU_HCI_AMP1_EVT (0x0001 | BT_EVT_TO_BTU_HCI_EVT) |
| /* event from local AMP 2 controller */ |
| #define BT_EVT_TO_BTU_HCI_AMP2_EVT (0x0002 | BT_EVT_TO_BTU_HCI_EVT) |
| /* event from local AMP 3 controller */ |
| #define BT_EVT_TO_BTU_HCI_AMP3_EVT (0x0003 | BT_EVT_TO_BTU_HCI_EVT) |
| |
| /* ACL Data from HCI */ |
| #define BT_EVT_TO_BTU_HCI_ACL 0x1100 |
| /* SCO Data from HCI */ |
| #define BT_EVT_TO_BTU_HCI_SCO 0x1200 |
| /* HCI Transport Error */ |
| #define BT_EVT_TO_BTU_HCIT_ERR 0x1300 |
| |
| /* Serial Port Event */ |
| #define BT_EVT_TO_BTU_SP_EVT 0x1400 |
| /* Serial Port Data */ |
| #define BT_EVT_TO_BTU_SP_DATA 0x1500 |
| |
| /* HCI command from upper layer */ |
| #define BT_EVT_TO_BTU_HCI_CMD 0x1600 |
| |
| /* L2CAP segment(s) transmitted */ |
| #define BT_EVT_TO_BTU_L2C_SEG_XMIT 0x1900 |
| |
| /* BlueStackTester event: incoming message from target */ |
| #define BT_EVT_PROXY_INCOMING_MSG 0x1A00 |
| |
| /* Insight BTSIM event */ |
| #define BT_EVT_BTSIM 0x1B00 |
| /* Insight Script Engine event */ |
| #define BT_EVT_BTISE 0x1C00 |
| |
| /* To LM */ |
| /************************************/ |
| /* HCI Command */ |
| #define BT_EVT_TO_LM_HCI_CMD 0x2000 |
| /* HCI ACL Data */ |
| #define BT_EVT_TO_LM_HCI_ACL 0x2100 |
| /* HCI SCO Data */ |
| #define BT_EVT_TO_LM_HCI_SCO 0x2200 |
| /* HCI Transport Error */ |
| #define BT_EVT_TO_LM_HCIT_ERR 0x2300 |
| /* LC event */ |
| #define BT_EVT_TO_LM_LC_EVT 0x2400 |
| /* LC Received LMP command frame */ |
| #define BT_EVT_TO_LM_LC_LMP 0x2500 |
| /* LC Received ACL data */ |
| #define BT_EVT_TO_LM_LC_ACL 0x2600 |
| /* LC Received SCO data (not used) */ |
| #define BT_EVT_TO_LM_LC_SCO 0x2700 |
| /* LMP data transmit complete */ |
| #define BT_EVT_TO_LM_LC_ACL_TX 0x2800 |
| /* LMP Command transmit complete */ |
| #define BT_EVT_TO_LM_LC_LMPC_TX 0x2900 |
| /* Data to be locally loopbacked */ |
| #define BT_EVT_TO_LM_LOCAL_ACL_LB 0x2a00 |
| /* HCI ACL Data ack (not used) */ |
| #define BT_EVT_TO_LM_HCI_ACL_ACK 0x2b00 |
| /* LM Diagnostics commands */ |
| #define BT_EVT_TO_LM_DIAG 0x2c00 |
| |
| #define BT_EVT_TO_BTM_CMDS 0x2f00 |
| #define BT_EVT_TO_BTM_PM_MDCHG_EVT (0x0001 | BT_EVT_TO_BTM_CMDS) |
| |
| #define BT_EVT_TO_TCS_CMDS 0x3000 |
| |
| #define BT_EVT_TO_CTP_CMDS 0x3300 |
| |
| /* ftp events */ |
| #define BT_EVT_TO_FTP_SRVR_CMDS 0x3600 |
| #define BT_EVT_TO_FTP_CLNT_CMDS 0x3700 |
| |
| /* SIM Access Profile events */ |
| #define BT_EVT_TO_BTU_SAP 0x3800 |
| |
| /* opp events */ |
| #define BT_EVT_TO_OPP_SRVR_CMDS 0x3900 |
| #define BT_EVT_TO_OPP_CLNT_CMDS 0x3a00 |
| |
| /* for NFC */ |
| /************************************/ |
| /* NCI Command, Notification or Data*/ |
| #define BT_EVT_TO_NFC_NCI 0x4000 |
| /* Initialization message */ |
| #define BT_EVT_TO_NFC_INIT 0x4100 |
| /* Low power */ |
| #define BT_EVT_TO_NCI_LP 0x4200 |
| /* Error notification to NFC Task */ |
| #define BT_EVT_TO_NFC_ERR 0x4300 |
| |
| /* events to NFCC simulation (NCI packets) */ |
| #define BT_EVT_TO_NFCCSIM_NCI 0x4a00 |
| |
| /* HCISU Events */ |
| |
| #define BT_EVT_HCISU 0x5000 |
| |
| #define BT_EVT_TO_HCISU_RECONFIG_EVT (0x0001 | BT_EVT_HCISU) |
| #define BT_EVT_TO_HCISU_UPDATE_BAUDRATE_EVT (0x0002 | BT_EVT_HCISU) |
| #define BT_EVT_TO_HCISU_LP_ENABLE_EVT (0x0003 | BT_EVT_HCISU) |
| #define BT_EVT_TO_HCISU_LP_DISABLE_EVT (0x0004 | BT_EVT_HCISU) |
| #define BT_EVT_TO_HCISU_LP_APP_SLEEPING_EVT (0x0005 | BT_EVT_HCISU) |
| #define BT_EVT_TO_HCISU_LP_ALLOW_BT_SLEEP_EVT (0x0006 | BT_EVT_HCISU) |
| #define BT_EVT_TO_HCISU_LP_WAKEUP_HOST_EVT (0x0007 | BT_EVT_HCISU) |
| #define BT_EVT_TO_HCISU_LP_RCV_H4IBSS_EVT (0x0008 | BT_EVT_HCISU) |
| #define BT_EVT_TO_HCISU_H5_RESET_EVT (0x0009 | BT_EVT_HCISU) |
| #define BT_EVT_HCISU_START_QUICK_TIMER (0x000a | BT_EVT_HCISU) |
| |
| #define BT_EVT_DATA_TO_AMP_1 0x5100 |
| #define BT_EVT_DATA_TO_AMP_15 0x5f00 |
| |
| /* HSP Events */ |
| |
| #define BT_EVT_BTU_HSP2 0x6000 |
| |
| #define BT_EVT_TO_BTU_HSP2_EVT (0x0001 | BT_EVT_BTU_HSP2) |
| |
| /* BPP Events */ |
| #define BT_EVT_TO_BPP_PR_CMDS 0x6100 /* Printer Events */ |
| #define BT_EVT_TO_BPP_SND_CMDS 0x6200 /* BPP Sender Events */ |
| |
| /* BIP Events */ |
| #define BT_EVT_TO_BIP_CMDS 0x6300 |
| |
| /* HCRP Events */ |
| |
| #define BT_EVT_BTU_HCRP 0x7000 |
| |
| #define BT_EVT_TO_BTU_HCRP_EVT (0x0001 | BT_EVT_BTU_HCRP) |
| #define BT_EVT_TO_BTU_HCRPM_EVT (0x0002 | BT_EVT_BTU_HCRP) |
| |
| #define BT_EVT_BTU_HFP 0x8000 |
| #define BT_EVT_TO_BTU_HFP_EVT (0x0001 | BT_EVT_BTU_HFP) |
| |
| #define BT_EVT_BTU_IPC_EVT 0x9000 |
| #define BT_EVT_BTU_IPC_LOGMSG_EVT (0x0000 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_ACL_EVT (0x0001 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_BTU_EVT (0x0002 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_L2C_EVT (0x0003 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_L2C_MSG_EVT (0x0004 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_BTM_EVT (0x0005 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_AVDT_EVT (0x0006 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_SLIP_EVT (0x0007 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_MGMT_EVT (0x0008 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_BTTRC_EVT (0x0009 | BT_EVT_BTU_IPC_EVT) |
| #define BT_EVT_BTU_IPC_BURST_EVT (0x000A | BT_EVT_BTU_IPC_EVT) |
| |
| /* BTIF Events */ |
| #define BT_EVT_BTIF 0xA000 |
| #define BT_EVT_CONTEXT_SWITCH_EVT (0x0001 | BT_EVT_BTIF) |
| |
| /* Define the header of each buffer used in the Bluetooth stack. |
| */ |
| typedef struct { |
| uint16_t event; |
| uint16_t len; |
| uint16_t offset; |
| uint16_t layer_specific; |
| uint8_t data[]; |
| } BT_HDR; |
| |
| #define BT_HDR_SIZE (sizeof(BT_HDR)) |
| |
| #define BT_PSM_SDP 0x0001 |
| #define BT_PSM_RFCOMM 0x0003 |
| #define BT_PSM_TCS 0x0005 |
| #define BT_PSM_CTP 0x0007 |
| #define BT_PSM_BNEP 0x000F |
| #define BT_PSM_HIDC 0x0011 |
| #define BT_PSM_HIDI 0x0013 |
| #define BT_PSM_UPNP 0x0015 |
| #define BT_PSM_AVCTP 0x0017 |
| #define BT_PSM_AVDTP 0x0019 |
| #define BT_PSM_AVCTP_13 0x001B /* Advanced Control - Browsing */ |
| #define BT_PSM_UDI_CP \ |
| 0x001D /* Unrestricted Digital Information Profile C-Plane */ |
| #define BT_PSM_ATT 0x001F /* Attribute Protocol */ |
| |
| /* These macros extract the HCI opcodes from a buffer |
| */ |
| #define HCI_GET_CMD_HDR_OPCODE(p) \ |
| (uint16_t)((*((uint8_t*)((p) + 1) + (p)->offset) + \ |
| (*((uint8_t*)((p) + 1) + (p)->offset + 1) << 8))) |
| #define HCI_GET_CMD_HDR_PARAM_LEN(p) \ |
| (uint8_t)(*((uint8_t*)((p) + 1) + (p)->offset + 2)) |
| |
| #define HCI_GET_EVT_HDR_OPCODE(p) \ |
| (uint8_t)(*((uint8_t*)((p) + 1) + (p)->offset)) |
| #define HCI_GET_EVT_HDR_PARAM_LEN(p) \ |
| (uint8_t)(*((uint8_t*)((p) + 1) + (p)->offset + 1)) |
| |
| /******************************************************************************* |
| * Macros to get and put bytes to and from a stream (Little Endian format). |
| */ |
| #define UINT64_TO_BE_STREAM(p, u64) \ |
| { \ |
| *(p)++ = (uint8_t)((u64) >> 56); \ |
| *(p)++ = (uint8_t)((u64) >> 48); \ |
| *(p)++ = (uint8_t)((u64) >> 40); \ |
| *(p)++ = (uint8_t)((u64) >> 32); \ |
| *(p)++ = (uint8_t)((u64) >> 24); \ |
| *(p)++ = (uint8_t)((u64) >> 16); \ |
| *(p)++ = (uint8_t)((u64) >> 8); \ |
| *(p)++ = (uint8_t)(u64); \ |
| } |
| #define UINT32_TO_STREAM(p, u32) \ |
| { \ |
| *(p)++ = (uint8_t)(u32); \ |
| *(p)++ = (uint8_t)((u32) >> 8); \ |
| *(p)++ = (uint8_t)((u32) >> 16); \ |
| *(p)++ = (uint8_t)((u32) >> 24); \ |
| } |
| #define UINT24_TO_STREAM(p, u24) \ |
| { \ |
| *(p)++ = (uint8_t)(u24); \ |
| *(p)++ = (uint8_t)((u24) >> 8); \ |
| *(p)++ = (uint8_t)((u24) >> 16); \ |
| } |
| #define UINT16_TO_STREAM(p, u16) \ |
| { \ |
| *(p)++ = (uint8_t)(u16); \ |
| *(p)++ = (uint8_t)((u16) >> 8); \ |
| } |
| #define UINT8_TO_STREAM(p, u8) \ |
| { *(p)++ = (uint8_t)(u8); } |
| #define INT8_TO_STREAM(p, u8) \ |
| { *(p)++ = (int8_t)(u8); } |
| #define ARRAY32_TO_STREAM(p, a) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < 32; ijk++) *(p)++ = (uint8_t)(a)[31 - ijk]; \ |
| } |
| #define ARRAY16_TO_STREAM(p, a) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < 16; ijk++) *(p)++ = (uint8_t)(a)[15 - ijk]; \ |
| } |
| #define ARRAY8_TO_STREAM(p, a) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < 8; ijk++) *(p)++ = (uint8_t)(a)[7 - ijk]; \ |
| } |
| #define BDADDR_TO_STREAM(p, a) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < BD_ADDR_LEN; ijk++) \ |
| *(p)++ = (uint8_t)(a)[BD_ADDR_LEN - 1 - ijk]; \ |
| } |
| #define LAP_TO_STREAM(p, a) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < LAP_LEN; ijk++) \ |
| *(p)++ = (uint8_t)(a)[LAP_LEN - 1 - ijk]; \ |
| } |
| #define DEVCLASS_TO_STREAM(p, a) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < DEV_CLASS_LEN; ijk++) \ |
| *(p)++ = (uint8_t)(a)[DEV_CLASS_LEN - 1 - ijk]; \ |
| } |
| #define ARRAY_TO_STREAM(p, a, len) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < (len); ijk++) *(p)++ = (uint8_t)(a)[ijk]; \ |
| } |
| #define REVERSE_ARRAY_TO_STREAM(p, a, len) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < (len); ijk++) *(p)++ = (uint8_t)(a)[(len)-1 - ijk]; \ |
| } |
| |
| #define STREAM_TO_INT8(u8, p) \ |
| { \ |
| (u8) = (*((int8_t*)p)); \ |
| (p) += 1; \ |
| } |
| #define STREAM_TO_UINT8(u8, p) \ |
| { \ |
| (u8) = (uint8_t)(*(p)); \ |
| (p) += 1; \ |
| } |
| #define STREAM_TO_UINT16(u16, p) \ |
| { \ |
| (u16) = ((uint16_t)(*(p)) + (((uint16_t)(*((p) + 1))) << 8)); \ |
| (p) += 2; \ |
| } |
| #define STREAM_TO_UINT24(u32, p) \ |
| { \ |
| (u32) = (((uint32_t)(*(p))) + ((((uint32_t)(*((p) + 1)))) << 8) + \ |
| ((((uint32_t)(*((p) + 2)))) << 16)); \ |
| (p) += 3; \ |
| } |
| #define STREAM_TO_UINT32(u32, p) \ |
| { \ |
| (u32) = (((uint32_t)(*(p))) + ((((uint32_t)(*((p) + 1)))) << 8) + \ |
| ((((uint32_t)(*((p) + 2)))) << 16) + \ |
| ((((uint32_t)(*((p) + 3)))) << 24)); \ |
| (p) += 4; \ |
| } |
| #define STREAM_TO_BDADDR(a, p) \ |
| { \ |
| int ijk; \ |
| uint8_t* pbda = (uint8_t*)(a) + BD_ADDR_LEN - 1; \ |
| for (ijk = 0; ijk < BD_ADDR_LEN; ijk++) *pbda-- = *(p)++; \ |
| } |
| #define STREAM_TO_ARRAY32(a, p) \ |
| { \ |
| int ijk; \ |
| uint8_t* _pa = (uint8_t*)(a) + 31; \ |
| for (ijk = 0; ijk < 32; ijk++) *_pa-- = *(p)++; \ |
| } |
| #define STREAM_TO_ARRAY16(a, p) \ |
| { \ |
| int ijk; \ |
| uint8_t* _pa = (uint8_t*)(a) + 15; \ |
| for (ijk = 0; ijk < 16; ijk++) *_pa-- = *(p)++; \ |
| } |
| #define STREAM_TO_ARRAY8(a, p) \ |
| { \ |
| int ijk; \ |
| uint8_t* _pa = (uint8_t*)(a) + 7; \ |
| for (ijk = 0; ijk < 8; ijk++) *_pa-- = *(p)++; \ |
| } |
| #define STREAM_TO_DEVCLASS(a, p) \ |
| { \ |
| int ijk; \ |
| uint8_t* _pa = (uint8_t*)(a) + DEV_CLASS_LEN - 1; \ |
| for (ijk = 0; ijk < DEV_CLASS_LEN; ijk++) *_pa-- = *(p)++; \ |
| } |
| #define STREAM_TO_LAP(a, p) \ |
| { \ |
| int ijk; \ |
| uint8_t* plap = (uint8_t*)(a) + LAP_LEN - 1; \ |
| for (ijk = 0; ijk < LAP_LEN; ijk++) *plap-- = *(p)++; \ |
| } |
| #define STREAM_TO_ARRAY(a, p, len) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < (len); ijk++) ((uint8_t*)(a))[ijk] = *(p)++; \ |
| } |
| #define REVERSE_STREAM_TO_ARRAY(a, p, len) \ |
| { \ |
| int ijk; \ |
| uint8_t* _pa = (uint8_t*)(a) + (len)-1; \ |
| for (ijk = 0; ijk < (len); ijk++) *_pa-- = *(p)++; \ |
| } |
| |
| #define STREAM_SKIP_UINT8(p) \ |
| do { \ |
| (p) += 1; \ |
| } while (0) |
| #define STREAM_SKIP_UINT16(p) \ |
| do { \ |
| (p) += 2; \ |
| } while (0) |
| |
| /******************************************************************************* |
| * Macros to get and put bytes to and from a field (Little Endian format). |
| * These are the same as to stream, except the pointer is not incremented. |
| */ |
| #define UINT32_TO_FIELD(p, u32) \ |
| { \ |
| *(uint8_t*)(p) = (uint8_t)(u32); \ |
| *((uint8_t*)(p) + 1) = (uint8_t)((u32) >> 8); \ |
| *((uint8_t*)(p) + 2) = (uint8_t)((u32) >> 16); \ |
| *((uint8_t*)(p) + 3) = (uint8_t)((u32) >> 24); \ |
| } |
| #define UINT24_TO_FIELD(p, u24) \ |
| { \ |
| *(uint8_t*)(p) = (uint8_t)(u24); \ |
| *((uint8_t*)(p) + 1) = (uint8_t)((u24) >> 8); \ |
| *((uint8_t*)(p) + 2) = (uint8_t)((u24) >> 16); \ |
| } |
| #define UINT16_TO_FIELD(p, u16) \ |
| { \ |
| *(uint8_t*)(p) = (uint8_t)(u16); \ |
| *((uint8_t*)(p) + 1) = (uint8_t)((u16) >> 8); \ |
| } |
| #define UINT8_TO_FIELD(p, u8) \ |
| { *(uint8_t*)(p) = (uint8_t)(u8); } |
| |
| /******************************************************************************* |
| * Macros to get and put bytes to and from a stream (Big Endian format) |
| */ |
| #define UINT32_TO_BE_STREAM(p, u32) \ |
| { \ |
| *(p)++ = (uint8_t)((u32) >> 24); \ |
| *(p)++ = (uint8_t)((u32) >> 16); \ |
| *(p)++ = (uint8_t)((u32) >> 8); \ |
| *(p)++ = (uint8_t)(u32); \ |
| } |
| #define UINT24_TO_BE_STREAM(p, u24) \ |
| { \ |
| *(p)++ = (uint8_t)((u24) >> 16); \ |
| *(p)++ = (uint8_t)((u24) >> 8); \ |
| *(p)++ = (uint8_t)(u24); \ |
| } |
| #define UINT16_TO_BE_STREAM(p, u16) \ |
| { \ |
| *(p)++ = (uint8_t)((u16) >> 8); \ |
| *(p)++ = (uint8_t)(u16); \ |
| } |
| #define UINT8_TO_BE_STREAM(p, u8) \ |
| { *(p)++ = (uint8_t)(u8); } |
| #define ARRAY_TO_BE_STREAM(p, a, len) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < (len); ijk++) *(p)++ = (uint8_t)(a)[ijk]; \ |
| } |
| #define ARRAY_TO_BE_STREAM_REVERSE(p, a, len) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < (len); ijk++) *(p)++ = (uint8_t)(a)[(len)-ijk - 1]; \ |
| } |
| |
| #define BE_STREAM_TO_UINT8(u8, p) \ |
| { \ |
| (u8) = (uint8_t)(*(p)); \ |
| (p) += 1; \ |
| } |
| #define BE_STREAM_TO_UINT16(u16, p) \ |
| { \ |
| (u16) = (uint16_t)(((uint16_t)(*(p)) << 8) + (uint16_t)(*((p) + 1))); \ |
| (p) += 2; \ |
| } |
| #define BE_STREAM_TO_UINT24(u32, p) \ |
| { \ |
| (u32) = (((uint32_t)(*((p) + 2))) + ((uint32_t)(*((p) + 1)) << 8) + \ |
| ((uint32_t)(*(p)) << 16)); \ |
| (p) += 3; \ |
| } |
| #define BE_STREAM_TO_UINT32(u32, p) \ |
| { \ |
| (u32) = ((uint32_t)(*((p) + 3)) + ((uint32_t)(*((p) + 2)) << 8) + \ |
| ((uint32_t)(*((p) + 1)) << 16) + ((uint32_t)(*(p)) << 24)); \ |
| (p) += 4; \ |
| } |
| #define BE_STREAM_TO_UINT64(u64, p) \ |
| { \ |
| (u64) = ((uint64_t)(*((p) + 7)) + ((uint64_t)(*((p) + 6)) << 8) + \ |
| ((uint64_t)(*((p) + 5)) << 16) + ((uint64_t)(*((p) + 4)) << 24) + \ |
| ((uint64_t)(*((p) + 3)) << 32) + ((uint64_t)(*((p) + 2)) << 40) + \ |
| ((uint64_t)(*((p) + 1)) << 48) + ((uint64_t)(*(p)) << 56)); \ |
| (p) += 8; \ |
| } |
| #define BE_STREAM_TO_ARRAY(p, a, len) \ |
| { \ |
| int ijk; \ |
| for (ijk = 0; ijk < (len); ijk++) ((uint8_t*)(a))[ijk] = *(p)++; \ |
| } |
| |
| /******************************************************************************* |
| * Macros to get and put bytes to and from a field (Big Endian format). |
| * These are the same as to stream, except the pointer is not incremented. |
| */ |
| #define UINT32_TO_BE_FIELD(p, u32) \ |
| { \ |
| *(uint8_t*)(p) = (uint8_t)((u32) >> 24); \ |
| *((uint8_t*)(p) + 1) = (uint8_t)((u32) >> 16); \ |
| *((uint8_t*)(p) + 2) = (uint8_t)((u32) >> 8); \ |
| *((uint8_t*)(p) + 3) = (uint8_t)(u32); \ |
| } |
| #define UINT24_TO_BE_FIELD(p, u24) \ |
| { \ |
| *(uint8_t*)(p) = (uint8_t)((u24) >> 16); \ |
| *((uint8_t*)(p) + 1) = (uint8_t)((u24) >> 8); \ |
| *((uint8_t*)(p) + 2) = (uint8_t)(u24); \ |
| } |
| #define UINT16_TO_BE_FIELD(p, u16) \ |
| { \ |
| *(uint8_t*)(p) = (uint8_t)((u16) >> 8); \ |
| *((uint8_t*)(p) + 1) = (uint8_t)(u16); \ |
| } |
| #define UINT8_TO_BE_FIELD(p, u8) \ |
| { *(uint8_t*)(p) = (uint8_t)(u8); } |
| |
| /* Common Bluetooth field definitions */ |
| #define BD_ADDR_LEN 6 /* Device address length */ |
| typedef uint8_t BD_ADDR[BD_ADDR_LEN]; /* Device address */ |
| typedef uint8_t* BD_ADDR_PTR; /* Pointer to Device Address */ |
| |
| #ifdef __cplusplus |
| #include <base/strings/stringprintf.h> |
| #include <hardware/bluetooth.h> |
| |
| inline bool operator==(const bt_bdaddr_t& lhs, const bt_bdaddr_t& rhs) { |
| return memcmp(&lhs, &rhs, sizeof(lhs)) == 0; |
| } |
| |
| inline bool operator!=(const bt_bdaddr_t& lhs, const bt_bdaddr_t& rhs) { |
| return !(lhs == rhs); |
| } |
| |
| inline std::ostream& operator<<(std::ostream& os, const bt_bdaddr_t& a) { |
| os << base::StringPrintf("%02x:%02x:%02x:%02x:%02x:%02x", a.address[0], |
| a.address[1], a.address[2], a.address[3], |
| a.address[4], a.address[5]); |
| return os; |
| } |
| #endif |
| |
| #define AMP_KEY_TYPE_GAMP 0 |
| #define AMP_KEY_TYPE_WIFI 1 |
| #define AMP_KEY_TYPE_UWB 2 |
| typedef uint8_t tAMP_KEY_TYPE; |
| |
| #define BT_OCTET8_LEN 8 |
| typedef uint8_t BT_OCTET8[BT_OCTET8_LEN]; /* octet array: size 16 */ |
| |
| #define LINK_KEY_LEN 16 |
| typedef uint8_t LINK_KEY[LINK_KEY_LEN]; /* Link Key */ |
| |
| #define AMP_LINK_KEY_LEN 32 |
| typedef uint8_t |
| AMP_LINK_KEY[AMP_LINK_KEY_LEN]; /* Dedicated AMP and GAMP Link Keys */ |
| |
| #define BT_OCTET16_LEN 16 |
| typedef uint8_t BT_OCTET16[BT_OCTET16_LEN]; /* octet array: size 16 */ |
| |
| #define PIN_CODE_LEN 16 |
| typedef uint8_t PIN_CODE[PIN_CODE_LEN]; /* Pin Code (upto 128 bits) MSB is 0 */ |
| typedef uint8_t* PIN_CODE_PTR; /* Pointer to Pin Code */ |
| |
| #define BT_OCTET32_LEN 32 |
| typedef uint8_t BT_OCTET32[BT_OCTET32_LEN]; /* octet array: size 32 */ |
| |
| #define DEV_CLASS_LEN 3 |
| typedef uint8_t DEV_CLASS[DEV_CLASS_LEN]; /* Device class */ |
| typedef uint8_t* DEV_CLASS_PTR; /* Pointer to Device class */ |
| |
| #define EXT_INQ_RESP_LEN 3 |
| typedef uint8_t EXT_INQ_RESP[EXT_INQ_RESP_LEN]; /* Extended Inquiry Response */ |
| typedef uint8_t* EXT_INQ_RESP_PTR; /* Pointer to Extended Inquiry Response */ |
| |
| #define BD_NAME_LEN 248 |
| typedef uint8_t BD_NAME[BD_NAME_LEN + 1]; /* Device name */ |
| typedef uint8_t* BD_NAME_PTR; /* Pointer to Device name */ |
| |
| #define BD_FEATURES_LEN 8 |
| typedef uint8_t |
| BD_FEATURES[BD_FEATURES_LEN]; /* LMP features supported by device */ |
| |
| #define BT_EVENT_MASK_LEN 8 |
| typedef uint8_t BT_EVENT_MASK[BT_EVENT_MASK_LEN]; /* Event Mask */ |
| |
| #define LAP_LEN 3 |
| typedef uint8_t LAP[LAP_LEN]; /* IAC as passed to Inquiry (LAP) */ |
| typedef uint8_t INQ_LAP[LAP_LEN]; /* IAC as passed to Inquiry (LAP) */ |
| |
| #define RAND_NUM_LEN 16 |
| typedef uint8_t RAND_NUM[RAND_NUM_LEN]; |
| |
| #define ACO_LEN 12 |
| typedef uint8_t ACO[ACO_LEN]; /* Authenticated ciphering offset */ |
| |
| #define COF_LEN 12 |
| typedef uint8_t COF[COF_LEN]; /* ciphering offset number */ |
| |
| typedef struct { |
| uint8_t qos_flags; /* TBD */ |
| uint8_t service_type; /* see below */ |
| uint32_t token_rate; /* bytes/second */ |
| uint32_t token_bucket_size; /* bytes */ |
| uint32_t peak_bandwidth; /* bytes/second */ |
| uint32_t latency; /* microseconds */ |
| uint32_t delay_variation; /* microseconds */ |
| } FLOW_SPEC; |
| |
| /* Values for service_type */ |
| #define NO_TRAFFIC 0 |
| #define BEST_EFFORT 1 |
| #define GUARANTEED 2 |
| |
| /* Service class of the CoD */ |
| #define SERV_CLASS_NETWORKING (1 << 1) |
| #define SERV_CLASS_RENDERING (1 << 2) |
| #define SERV_CLASS_CAPTURING (1 << 3) |
| #define SERV_CLASS_OBJECT_TRANSFER (1 << 4) |
| #define SERV_CLASS_OBJECT_AUDIO (1 << 5) |
| #define SERV_CLASS_OBJECT_TELEPHONY (1 << 6) |
| #define SERV_CLASS_OBJECT_INFORMATION (1 << 7) |
| |
| /* Second byte */ |
| #define SERV_CLASS_LIMITED_DISC_MODE (0x20) |
| |
| /* Field size definitions. Note that byte lengths are rounded up. */ |
| #define ACCESS_CODE_BIT_LEN 72 |
| #define ACCESS_CODE_BYTE_LEN 9 |
| #define SHORTENED_ACCESS_CODE_BIT_LEN 68 |
| |
| typedef uint8_t ACCESS_CODE[ACCESS_CODE_BYTE_LEN]; |
| |
| #define SYNTH_TX 1 /* want synth code to TRANSMIT at this freq */ |
| #define SYNTH_RX 2 /* want synth code to RECEIVE at this freq */ |
| |
| #define SYNC_REPS 1 /* repeats of sync word transmitted to start of burst */ |
| |
| #define BT_1SEC_TIMEOUT_MS (1 * 1000) /* 1 second */ |
| |
| /* Maximum UUID size - 16 bytes, and structure to hold any type of UUID. */ |
| #define MAX_UUID_SIZE 16 |
| typedef struct { |
| #define LEN_UUID_16 2 |
| #define LEN_UUID_32 4 |
| #define LEN_UUID_128 16 |
| |
| uint16_t len; |
| |
| union { |
| uint16_t uuid16; |
| uint32_t uuid32; |
| uint8_t uuid128[MAX_UUID_SIZE]; |
| } uu; |
| |
| } tBT_UUID; |
| |
| #define BT_EIR_FLAGS_TYPE 0x01 |
| #define BT_EIR_MORE_16BITS_UUID_TYPE 0x02 |
| #define BT_EIR_COMPLETE_16BITS_UUID_TYPE 0x03 |
| #define BT_EIR_MORE_32BITS_UUID_TYPE 0x04 |
| #define BT_EIR_COMPLETE_32BITS_UUID_TYPE 0x05 |
| #define BT_EIR_MORE_128BITS_UUID_TYPE 0x06 |
| #define BT_EIR_COMPLETE_128BITS_UUID_TYPE 0x07 |
| #define BT_EIR_SHORTENED_LOCAL_NAME_TYPE 0x08 |
| #define BT_EIR_COMPLETE_LOCAL_NAME_TYPE 0x09 |
| #define BT_EIR_TX_POWER_LEVEL_TYPE 0x0A |
| #define BT_EIR_OOB_BD_ADDR_TYPE 0x0C |
| #define BT_EIR_OOB_COD_TYPE 0x0D |
| #define BT_EIR_OOB_SSP_HASH_C_TYPE 0x0E |
| #define BT_EIR_OOB_SSP_RAND_R_TYPE 0x0F |
| #define BT_EIR_SERVICE_DATA_TYPE 0x16 |
| #define BT_EIR_SERVICE_DATA_16BITS_UUID_TYPE 0x16 |
| #define BT_EIR_SERVICE_DATA_32BITS_UUID_TYPE 0x20 |
| #define BT_EIR_SERVICE_DATA_128BITS_UUID_TYPE 0x21 |
| #define BT_EIR_MANUFACTURER_SPECIFIC_TYPE 0xFF |
| |
| #define BT_OOB_COD_SIZE 3 |
| #define BT_OOB_HASH_C_SIZE 16 |
| #define BT_OOB_RAND_R_SIZE 16 |
| |
| /* Broadcom proprietary UUIDs and reserved PSMs |
| * |
| * The lowest 4 bytes byte of the UUID or GUID depend on the feature. Typically, |
| * the value of those bytes will be the PSM or SCN. |
| */ |
| #define BRCM_PROPRIETARY_UUID_BASE \ |
| 0xDA, 0x23, 0x41, 0x02, 0xA3, 0xBB, 0xC1, 0x71, 0xBA, 0x09, 0x6f, 0x21 |
| #define BRCM_PROPRIETARY_GUID_BASE \ |
| 0xda23, 0x4102, 0xa3, 0xbb, 0xc1, 0x71, 0xba, 0x09, 0x6f, 0x21 |
| |
| /* We will not allocate a PSM in the reserved range to 3rd party apps |
| */ |
| #define BRCM_RESERVED_PSM_START 0x5AE1 |
| #define BRCM_RESERVED_PSM_END 0x5AFF |
| |
| #define BRCM_UTILITY_SERVICE_PSM 0x5AE1 |
| #define BRCM_MATCHER_PSM 0x5AE3 |
| |
| /* Connection statistics |
| */ |
| |
| /* Structure to hold connection stats */ |
| #ifndef BT_CONN_STATS_DEFINED |
| #define BT_CONN_STATS_DEFINED |
| |
| /* These bits are used in the bIsConnected field */ |
| #define BT_CONNECTED_USING_BREDR 1 |
| #define BT_CONNECTED_USING_AMP 2 |
| |
| typedef struct { |
| uint32_t is_connected; |
| int32_t rssi; |
| uint32_t bytes_sent; |
| uint32_t bytes_rcvd; |
| uint32_t duration; |
| } tBT_CONN_STATS; |
| |
| #endif |
| |
| /***************************************************************************** |
| * Low Energy definitions |
| * |
| * Address types |
| */ |
| #define BLE_ADDR_PUBLIC 0x00 |
| #define BLE_ADDR_RANDOM 0x01 |
| #define BLE_ADDR_PUBLIC_ID 0x02 |
| #define BLE_ADDR_RANDOM_ID 0x03 |
| typedef uint8_t tBLE_ADDR_TYPE; |
| #define BLE_ADDR_TYPE_MASK (BLE_ADDR_RANDOM | BLE_ADDR_PUBLIC) |
| |
| #define BT_TRANSPORT_INVALID 0 |
| #define BT_TRANSPORT_BR_EDR 1 |
| #define BT_TRANSPORT_LE 2 |
| typedef uint8_t tBT_TRANSPORT; |
| |
| #define PHY_LE_1M_MASK 1 |
| #define PHY_LE_2M_MASK 2 |
| #define PHY_LE_CODED_MASK 4 |
| |
| #define BLE_ADDR_IS_STATIC(x) (((x)[0] & 0xC0) == 0xC0) |
| |
| typedef struct { |
| tBLE_ADDR_TYPE type; |
| BD_ADDR bda; |
| } tBLE_BD_ADDR; |
| |
| /* Device Types |
| */ |
| #define BT_DEVICE_TYPE_BREDR 0x01 |
| #define BT_DEVICE_TYPE_BLE 0x02 |
| #define BT_DEVICE_TYPE_DUMO 0x03 |
| typedef uint8_t tBT_DEVICE_TYPE; |
| /*****************************************************************************/ |
| |
| /* Define trace levels */ |
| #define BT_TRACE_LEVEL_NONE 0 /* No trace messages to be generated */ |
| #define BT_TRACE_LEVEL_ERROR 1 /* Error condition trace messages */ |
| #define BT_TRACE_LEVEL_WARNING 2 /* Warning condition trace messages */ |
| #define BT_TRACE_LEVEL_API 3 /* API traces */ |
| #define BT_TRACE_LEVEL_EVENT 4 /* Debug messages for events */ |
| #define BT_TRACE_LEVEL_DEBUG 5 /* Full debug messages */ |
| #define BT_TRACE_LEVEL_VERBOSE 6 /* Verbose debug messages */ |
| |
| #define MAX_TRACE_LEVEL 6 |
| |
| /* Define New Trace Type Definition */ |
| /* TRACE_CTRL_TYPE 0x^^000000*/ |
| #define TRACE_CTRL_MASK 0xff000000 |
| #define TRACE_GET_CTRL(x) ((((uint32_t)(x)) & TRACE_CTRL_MASK) >> 24) |
| |
| #define TRACE_CTRL_GENERAL 0x00000000 |
| #define TRACE_CTRL_STR_RESOURCE 0x01000000 |
| #define TRACE_CTRL_SEQ_FLOW 0x02000000 |
| #define TRACE_CTRL_MAX_NUM 3 |
| |
| /* LAYER SPECIFIC 0x00^^0000*/ |
| #define TRACE_LAYER_MASK 0x00ff0000 |
| #define TRACE_GET_LAYER(x) ((((uint32_t)(x)) & TRACE_LAYER_MASK) >> 16) |
| |
| #define TRACE_LAYER_NONE 0x00000000 |
| #define TRACE_LAYER_USB 0x00010000 |
| #define TRACE_LAYER_SERIAL 0x00020000 |
| #define TRACE_LAYER_SOCKET 0x00030000 |
| #define TRACE_LAYER_RS232 0x00040000 |
| #define TRACE_LAYER_TRANS_MAX_NUM 5 |
| #define TRACE_LAYER_TRANS_ALL 0x007f0000 |
| #define TRACE_LAYER_LC 0x00050000 |
| #define TRACE_LAYER_LM 0x00060000 |
| #define TRACE_LAYER_HCI 0x00070000 |
| #define TRACE_LAYER_L2CAP 0x00080000 |
| #define TRACE_LAYER_RFCOMM 0x00090000 |
| #define TRACE_LAYER_SDP 0x000a0000 |
| #define TRACE_LAYER_TCS 0x000b0000 |
| #define TRACE_LAYER_OBEX 0x000c0000 |
| #define TRACE_LAYER_BTM 0x000d0000 |
| #define TRACE_LAYER_ICP 0x00110000 |
| #define TRACE_LAYER_HSP2 0x00120000 |
| #define TRACE_LAYER_SPP 0x00130000 |
| #define TRACE_LAYER_CTP 0x00140000 |
| #define TRACE_LAYER_BPP 0x00150000 |
| #define TRACE_LAYER_HCRP 0x00160000 |
| #define TRACE_LAYER_FTP 0x00170000 |
| #define TRACE_LAYER_OPP 0x00180000 |
| #define TRACE_LAYER_BTU 0x00190000 |
| #define TRACE_LAYER_GKI 0x001a0000 /* OBSOLETED */ |
| #define TRACE_LAYER_BNEP 0x001b0000 |
| #define TRACE_LAYER_PAN 0x001c0000 |
| #define TRACE_LAYER_HFP 0x001d0000 |
| #define TRACE_LAYER_HID 0x001e0000 |
| #define TRACE_LAYER_BIP 0x001f0000 |
| #define TRACE_LAYER_AVP 0x00200000 |
| #define TRACE_LAYER_A2DP 0x00210000 |
| #define TRACE_LAYER_SAP 0x00220000 |
| #define TRACE_LAYER_AMP 0x00230000 |
| #define TRACE_LAYER_MCA 0x00240000 |
| #define TRACE_LAYER_ATT 0x00250000 |
| #define TRACE_LAYER_SMP 0x00260000 |
| #define TRACE_LAYER_NFC 0x00270000 |
| #define TRACE_LAYER_NCI 0x00280000 |
| #define TRACE_LAYER_LLCP 0x00290000 |
| #define TRACE_LAYER_NDEF 0x002a0000 |
| #define TRACE_LAYER_RW 0x002b0000 |
| #define TRACE_LAYER_CE 0x002c0000 |
| #define TRACE_LAYER_P2P 0x002d0000 |
| #define TRACE_LAYER_SNEP 0x002e0000 |
| #define TRACE_LAYER_CHO 0x002f0000 |
| #define TRACE_LAYER_NFA 0x00300000 |
| |
| #define TRACE_LAYER_MAX_NUM 0x0031 |
| |
| /* TRACE_ORIGINATOR 0x0000^^00*/ |
| #define TRACE_ORG_MASK 0x0000ff00 |
| #define TRACE_GET_ORG(x) ((((uint32_t)(x)) & TRACE_ORG_MASK) >> 8) |
| |
| #define TRACE_ORG_STACK 0x00000000 |
| #define TRACE_ORG_HCI_TRANS 0x00000100 |
| #define TRACE_ORG_PROTO_DISP 0x00000200 |
| #define TRACE_ORG_RPC 0x00000300 |
| #define TRACE_ORG_GKI 0x00000400 /* OBSOLETED */ |
| #define TRACE_ORG_APPL 0x00000500 |
| #define TRACE_ORG_SCR_WRAPPER 0x00000600 |
| #define TRACE_ORG_SCR_ENGINE 0x00000700 |
| #define TRACE_ORG_USER_SCR 0x00000800 |
| #define TRACE_ORG_TESTER 0x00000900 |
| #define TRACE_ORG_MAX_NUM 10 /* 32-bit mask; must be < 32 */ |
| #define TRACE_LITE_ORG_MAX_NUM 6 |
| #define TRACE_ORG_ALL 0x03ff |
| #define TRACE_ORG_RPC_TRANS 0x04 |
| |
| #define TRACE_ORG_REG 0x00000909 |
| #define TRACE_ORG_REG_SUCCESS 0x0000090a |
| |
| /* TRACE_TYPE 0x000000^^*/ |
| #define TRACE_TYPE_MASK 0x000000ff |
| #define TRACE_GET_TYPE(x) (((uint32_t)(x)) & TRACE_TYPE_MASK) |
| |
| #define TRACE_TYPE_ERROR 0x00000000 |
| #define TRACE_TYPE_WARNING 0x00000001 |
| #define TRACE_TYPE_API 0x00000002 |
| #define TRACE_TYPE_EVENT 0x00000003 |
| #define TRACE_TYPE_DEBUG 0x00000004 |
| #define TRACE_TYPE_STACK_ONLY_MAX TRACE_TYPE_DEBUG |
| #define TRACE_TYPE_TX 0x00000005 |
| #define TRACE_TYPE_RX 0x00000006 |
| #define TRACE_TYPE_DEBUG_ASSERT 0x00000007 |
| #define TRACE_TYPE_GENERIC 0x00000008 |
| #define TRACE_TYPE_REG 0x00000009 |
| #define TRACE_TYPE_REG_SUCCESS 0x0000000a |
| #define TRACE_TYPE_CMD_TX 0x0000000b |
| #define TRACE_TYPE_EVT_TX 0x0000000c |
| #define TRACE_TYPE_ACL_TX 0x0000000d |
| #define TRACE_TYPE_CMD_RX 0x0000000e |
| #define TRACE_TYPE_EVT_RX 0x0000000f |
| #define TRACE_TYPE_ACL_RX 0x00000010 |
| #define TRACE_TYPE_TARGET_TRACE 0x00000011 |
| #define TRACE_TYPE_SCO_TX 0x00000012 |
| #define TRACE_TYPE_SCO_RX 0x00000013 |
| |
| #define TRACE_TYPE_MAX_NUM 20 |
| #define TRACE_TYPE_ALL 0xffff |
| |
| /* Define color for script type */ |
| #define SCR_COLOR_DEFAULT 0 |
| #define SCR_COLOR_TYPE_COMMENT 1 |
| #define SCR_COLOR_TYPE_COMMAND 2 |
| #define SCR_COLOR_TYPE_EVENT 3 |
| #define SCR_COLOR_TYPE_SELECT 4 |
| |
| /* Define protocol trace flag values */ |
| #define SCR_PROTO_TRACE_HCI_SUMMARY 0x00000001 |
| #define SCR_PROTO_TRACE_HCI_DATA 0x00000002 |
| #define SCR_PROTO_TRACE_L2CAP 0x00000004 |
| #define SCR_PROTO_TRACE_RFCOMM 0x00000008 |
| #define SCR_PROTO_TRACE_SDP 0x00000010 |
| #define SCR_PROTO_TRACE_TCS 0x00000020 |
| #define SCR_PROTO_TRACE_OBEX 0x00000040 |
| #define SCR_PROTO_TRACE_OAPP 0x00000080 /* OBEX Application Profile */ |
| #define SCR_PROTO_TRACE_AMP 0x00000100 |
| #define SCR_PROTO_TRACE_BNEP 0x00000200 |
| #define SCR_PROTO_TRACE_AVP 0x00000400 |
| #define SCR_PROTO_TRACE_MCA 0x00000800 |
| #define SCR_PROTO_TRACE_ATT 0x00001000 |
| #define SCR_PROTO_TRACE_SMP 0x00002000 |
| #define SCR_PROTO_TRACE_NCI 0x00004000 |
| #define SCR_PROTO_TRACE_LLCP 0x00008000 |
| #define SCR_PROTO_TRACE_NDEF 0x00010000 |
| #define SCR_PROTO_TRACE_RW 0x00020000 |
| #define SCR_PROTO_TRACE_CE 0x00040000 |
| #define SCR_PROTO_TRACE_SNEP 0x00080000 |
| #define SCR_PROTO_TRACE_CHO 0x00100000 |
| #define SCR_PROTO_TRACE_ALL 0x001fffff |
| #define SCR_PROTO_TRACE_HCI_LOGGING_VSE \ |
| 0x0800 /* Brcm vs event for logmsg and protocol traces */ |
| |
| #define MAX_SCRIPT_TYPE 5 |
| |
| #define TCS_PSM_INTERCOM 5 |
| #define TCS_PSM_CORDLESS 7 |
| #define BT_PSM_BNEP 0x000F |
| /* Define PSMs HID uses */ |
| #define HID_PSM_CONTROL 0x0011 |
| #define HID_PSM_INTERRUPT 0x0013 |
| |
| /* Define a function for logging */ |
| typedef void(BT_LOG_FUNC)(int trace_type, const char* fmt_str, ...); |
| |
| /* bd addr length and type */ |
| #ifndef BD_ADDR_LEN |
| #define BD_ADDR_LEN 6 |
| typedef uint8_t BD_ADDR[BD_ADDR_LEN]; |
| #endif |
| |
| // From bd.c |
| |
| /***************************************************************************** |
| * Constants |
| ****************************************************************************/ |
| |
| /* global constant for "any" bd addr */ |
| static const BD_ADDR bd_addr_any = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; |
| static const BD_ADDR bd_addr_null = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; |
| |
| /***************************************************************************** |
| * Functions |
| ****************************************************************************/ |
| |
| /******************************************************************************* |
| * |
| * Function bdcpy |
| * |
| * Description Copy bd addr b to a. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static inline void bdcpy(BD_ADDR a, const BD_ADDR b) { |
| int i; |
| |
| for (i = BD_ADDR_LEN; i != 0; i--) { |
| *a++ = *b++; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bdcmp |
| * |
| * Description Compare bd addr b to a. |
| * |
| * |
| * Returns Zero if b==a, nonzero otherwise (like memcmp). |
| * |
| ******************************************************************************/ |
| static inline int bdcmp(const BD_ADDR a, const BD_ADDR b) { |
| int i; |
| |
| for (i = BD_ADDR_LEN; i != 0; i--) { |
| if (*a++ != *b++) { |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bdcmpany |
| * |
| * Description Compare bd addr to "any" bd addr. |
| * |
| * |
| * Returns Zero if a equals bd_addr_any. |
| * |
| ******************************************************************************/ |
| static inline int bdcmpany(const BD_ADDR a) { return bdcmp(a, bd_addr_any); } |
| |
| /******************************************************************************* |
| * |
| * Function bdsetany |
| * |
| * Description Set bd addr to "any" bd addr. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static inline void bdsetany(BD_ADDR a) { bdcpy(a, bd_addr_any); } |
| #endif |