blob: b1f2d6546852ce8b809a83e2138d02da82674250 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains the Bluetooth Manager (BTM) API function external
* definitions.
*
******************************************************************************/
#ifndef BTM_BLE_API_H
#define BTM_BLE_API_H
#include <hardware/bt_common_types.h>
#include "bt_common.h"
#include "btm_api.h"
#include "btm_ble_api_types.h"
#include "osi/include/alarm.h"
tBTM_BLE_SCAN_SETUP_CBACK bta_ble_scan_setup_cb;
/*****************************************************************************
* EXTERNAL FUNCTION DECLARATIONS
****************************************************************************/
/*******************************************************************************
*
* Function BTM_SecAddBleDevice
*
* Description Add/modify device. This function will be normally called
* during host startup to restore all required information
* for a LE device stored in the NVRAM.
*
* Parameters: bd_addr - BD address of the peer
* bd_name - Name of the peer device. NULL if unknown.
* dev_type - Remote device's device type.
* addr_type - LE device address type.
*
* Returns true if added OK, else false
*
******************************************************************************/
extern bool BTM_SecAddBleDevice(const BD_ADDR bd_addr, BD_NAME bd_name,
tBT_DEVICE_TYPE dev_type,
tBLE_ADDR_TYPE addr_type);
/*******************************************************************************
*
* Function BTM_SecAddBleKey
*
* Description Add/modify LE device information. This function will be
* normally called during host startup to restore all required
* information stored in the NVRAM.
*
* Parameters: bd_addr - BD address of the peer
* p_le_key - LE key values.
* key_type - LE SMP key type.
*
* Returns true if added OK, else false
*
******************************************************************************/
extern bool BTM_SecAddBleKey(BD_ADDR bd_addr, tBTM_LE_KEY_VALUE* p_le_key,
tBTM_LE_KEY_TYPE key_type);
/*******************************************************************************
*
* Function BTM_BleSetAdvParams
*
* Description This function is called to set advertising parameters.
*
* Parameters: None.
*
* Returns void
*
******************************************************************************/
extern tBTM_STATUS BTM_BleSetAdvParams(uint16_t adv_int_min,
uint16_t adv_int_max,
tBLE_BD_ADDR* p_dir_bda,
tBTM_BLE_ADV_CHNL_MAP chnl_map);
/*******************************************************************************
*
* Function BTM_BleObtainVendorCapabilities
*
* Description This function is called to obatin vendor capabilties
*
* Parameters p_cmn_vsc_cb - Returns the vednor capabilities
*
* Returns void
*
******************************************************************************/
extern void BTM_BleObtainVendorCapabilities(tBTM_BLE_VSC_CB* p_cmn_vsc_cb);
/*******************************************************************************
*
* Function BTM_BleSetScanParams
*
* Description This function is called to set Scan parameters.
*
* Parameters client_if - Client IF value
* scan_interval - Scan interval
* scan_window - Scan window
* scan_type - Scan type
* scan_setup_status_cback - Scan setup status callback
*
* Returns void
*
******************************************************************************/
extern void BTM_BleSetScanParams(
tGATT_IF client_if, uint32_t scan_interval, uint32_t scan_window,
tBLE_SCAN_MODE scan_type,
tBLE_SCAN_PARAM_SETUP_CBACK scan_setup_status_cback);
/*******************************************************************************
*
* Function BTM_BleGetVendorCapabilities
*
* Description This function reads local LE features
*
* Parameters p_cmn_vsc_cb : Locala LE capability structure
*
* Returns void
*
******************************************************************************/
extern void BTM_BleGetVendorCapabilities(tBTM_BLE_VSC_CB* p_cmn_vsc_cb);
/*******************************************************************************
*
* Function BTM_BleSetStorageConfig
*
* Description This function is called to setup storage configuration and
* setup callbacks.
*
* Parameters uint8_t batch_scan_full_max -Batch scan full maximum
uint8_t batch_scan_trunc_max - Batch scan truncated value
maximum
uint8_t batch_scan_notify_threshold - Threshold value
tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback - Setup callback
tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback -Threshold
callback
void *p_ref - Reference value
*
* Returns tBTM_STATUS
*
******************************************************************************/
extern tBTM_STATUS BTM_BleSetStorageConfig(
uint8_t batch_scan_full_max, uint8_t batch_scan_trunc_max,
uint8_t batch_scan_notify_threshold,
tBTM_BLE_SCAN_SETUP_CBACK* p_setup_cback,
tBTM_BLE_SCAN_THRESHOLD_CBACK* p_thres_cback,
tBTM_BLE_SCAN_REP_CBACK* p_cback, tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
*
* Function BTM_BleEnableBatchScan
*
* Description This function is called to enable batch scan
*
* Parameters tBTM_BLE_BATCH_SCAN_MODE scan_mode - Batch scan mode
uint32_t scan_interval -Scan interval
uint32_t scan_window - Scan window value
tBLE_ADDR_TYPE addr_type - Address type
tBTM_BLE_DISCARD_RULE discard_rule - Data discard rules
*
* Returns tBTM_STATUS
*
******************************************************************************/
extern tBTM_STATUS BTM_BleEnableBatchScan(tBTM_BLE_BATCH_SCAN_MODE scan_mode,
uint32_t scan_interval,
uint32_t scan_window,
tBTM_BLE_DISCARD_RULE discard_rule,
tBLE_ADDR_TYPE addr_type,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
*
* Function BTM_BleDisableBatchScan
*
* Description This function is called to disable batch scanning
*
* Parameters void
*
******************************************************************************/
extern tBTM_STATUS BTM_BleDisableBatchScan(tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
*
* Function BTM_BleReadScanReports
*
* Description This function is called to read batch scan reports
*
* Parameters tBLE_SCAN_MODE scan_mode - Scan mode report to be read out
tBTM_BLE_SCAN_REP_CBACK* p_cback - Reports callback
*
* Returns tBTM_STATUS
*
******************************************************************************/
extern tBTM_STATUS BTM_BleReadScanReports(tBLE_SCAN_MODE scan_mode,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
*
* Function BTM_BleTrackAdvertiser
*
* Description This function is called to read batch scan reports
*
* Parameters p_track_cback - Tracking callback
* ref_value - Reference value
*
* Returns tBTM_STATUS
*
******************************************************************************/
extern tBTM_STATUS BTM_BleTrackAdvertiser(
tBTM_BLE_TRACK_ADV_CBACK* p_track_cback, tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
*
* Function BTM_BleWriteScanRsp
*
* Description This function is called to write LE scan response.
*
* Parameters: p_scan_rsp: scan response.
*
* Returns status
*
******************************************************************************/
extern void BTM_BleWriteScanRsp(uint8_t* data, uint8_t length,
tBTM_BLE_ADV_DATA_CMPL_CBACK* p_adv_data_cback);
/*******************************************************************************
*
* Function BTM_BleObserve
*
* Description This procedure keep the device listening for advertising
* events from a broadcast device.
*
* Parameters start: start or stop observe.
*
* Returns void
*
******************************************************************************/
extern tBTM_STATUS BTM_BleObserve(bool start, uint8_t duration,
tBTM_INQ_RESULTS_CB* p_results_cb,
tBTM_CMPL_CB* p_cmpl_cb);
/*******************************************************************************
*
* Function BTM_GetDeviceIDRoot
*
* Description This function is called to read the local device identity
* root.
*
* Returns void
* the local device ER is copied into er
*
******************************************************************************/
extern void BTM_GetDeviceIDRoot(BT_OCTET16 ir);
/*******************************************************************************
*
* Function BTM_GetDeviceEncRoot
*
* Description This function is called to read the local device encryption
* root.
*
* Returns void
* the local device ER is copied into er
*
******************************************************************************/
extern void BTM_GetDeviceEncRoot(BT_OCTET16 er);
/*******************************************************************************
*
* Function BTM_GetDeviceDHK
*
* Description This function is called to read the local device DHK.
*
* Returns void
* the local device DHK is copied into dhk
*
******************************************************************************/
extern void BTM_GetDeviceDHK(BT_OCTET16 dhk);
/*******************************************************************************
*
* Function BTM_SecurityGrant
*
* Description This function is called to grant security process.
*
* Parameters bd_addr - peer device bd address.
* res - result of the operation BTM_SUCCESS if success.
* Otherwise, BTM_REPEATED_ATTEMPTS is too many
* attempts.
*
* Returns None
*
******************************************************************************/
extern void BTM_SecurityGrant(BD_ADDR bd_addr, uint8_t res);
/*******************************************************************************
*
* Function BTM_BlePasskeyReply
*
* Description This function is called after Security Manager submitted
* passkey request to the application.
*
* Parameters: bd_addr - Address of the device for which passkey was
* requested
* res - result of the operation SMP_SUCCESS if success
* passkey - numeric value in the range of
* BTM_MIN_PASSKEY_VAL(0) -
* BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
*
******************************************************************************/
extern void BTM_BlePasskeyReply(BD_ADDR bd_addr, uint8_t res, uint32_t passkey);
/*******************************************************************************
*
* Function BTM_BleConfirmReply
*
* Description This function is called after Security Manager submitted
* numeric comparison request to the application.
*
* Parameters: bd_addr - Address of the device with which numeric
* comparison was requested
* res - comparison result BTM_SUCCESS if success
*
******************************************************************************/
extern void BTM_BleConfirmReply(BD_ADDR bd_addr, uint8_t res);
/*******************************************************************************
*
* Function BTM_LeOobDataReply
*
* Description This function is called to provide the OOB data for
* SMP in response to BTM_LE_OOB_REQ_EVT
*
* Parameters: bd_addr - Address of the peer device
* res - result of the operation SMP_SUCCESS if success
* p_data - simple pairing Randomizer C.
*
******************************************************************************/
extern void BTM_BleOobDataReply(BD_ADDR bd_addr, uint8_t res, uint8_t len,
uint8_t* p_data);
/*******************************************************************************
*
* Function BTM_BleSecureConnectionOobDataReply
*
* Description This function is called to provide the OOB data for
* SMP in response to BTM_LE_OOB_REQ_EVT when secure connection
* data is available
*
* Parameters: bd_addr - Address of the peer device
* p_c - pointer to Confirmation
* p_r - pointer to Randomizer.
*
******************************************************************************/
extern void BTM_BleSecureConnectionOobDataReply(BD_ADDR bd_addr, uint8_t* p_c,
uint8_t* p_r);
/*******************************************************************************
*
* Function BTM_BleDataSignature
*
* Description This function is called to sign the data using AES128 CMAC
* algorith.
*
* Parameter bd_addr: target device the data to be signed for.
* p_text: singing data
* len: length of the signing data
* signature: output parameter where data signature is going to
* be stored.
*
* Returns true if signing sucessul, otherwise false.
*
******************************************************************************/
extern bool BTM_BleDataSignature(BD_ADDR bd_addr, uint8_t* p_text, uint16_t len,
BLE_SIGNATURE signature);
/*******************************************************************************
*
* Function BTM_BleVerifySignature
*
* Description This function is called to verify the data signature
*
* Parameter bd_addr: target device the data to be signed for.
* p_orig: original data before signature.
* len: length of the signing data
* counter: counter used when doing data signing
* p_comp: signature to be compared against.
* Returns true if signature verified correctly; otherwise false.
*
******************************************************************************/
extern bool BTM_BleVerifySignature(BD_ADDR bd_addr, uint8_t* p_orig,
uint16_t len, uint32_t counter,
uint8_t* p_comp);
/*******************************************************************************
*
* Function BTM_ReadConnectionAddr
*
* Description Read the local device random address.
*
* Returns void
*
******************************************************************************/
extern void BTM_ReadConnectionAddr(BD_ADDR remote_bda, BD_ADDR local_conn_addr,
tBLE_ADDR_TYPE* p_addr_type);
/*******************************************************************************
*
* Function BTM_ReadRemoteConnectionAddr
*
* Description Read the remote device address currently used.
*
* Returns void
*
******************************************************************************/
extern bool BTM_ReadRemoteConnectionAddr(BD_ADDR pseudo_addr, BD_ADDR conn_addr,
tBLE_ADDR_TYPE* p_addr_type);
/*******************************************************************************
*
* Function BTM_BleLoadLocalKeys
*
* Description Local local identity key, encryption root or sign counter.
*
* Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID,
* BTM_BLE_KEY_TYPE_ER
* or BTM_BLE_KEY_TYPE_COUNTER.
* p_key: pointer to the key.
*
* Returns non2.
*
******************************************************************************/
extern void BTM_BleLoadLocalKeys(uint8_t key_type, tBTM_BLE_LOCAL_KEYS* p_key);
/*******************************************************************************
*
* Function BTM_BleSetBgConnType
*
* Description This function is called to set BLE background connection
* procedure type. It can be auto connection, or selective
* connection.
*
* Parameters conn_type: it can be auto connection, or selective
* connection.
* p_select_cback: callback function when selective connection
* procedure is being used.
*
* Returns void
*
******************************************************************************/
extern bool BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE conn_type,
tBTM_BLE_SEL_CBACK* p_select_cback);
/*******************************************************************************
*
* Function BTM_BleUpdateBgConnDev
*
* Description This function is called to add or remove a device into/from
* background connection procedure. The background connection
* procedure is decided by the background connection type, it
*can be
* auto connection, or selective connection.
*
* Parameters add_remove: true to add; false to remove.
* remote_bda: device address to add/remove.
*
* Returns void
*
******************************************************************************/
extern bool BTM_BleUpdateBgConnDev(bool add_remove, BD_ADDR remote_bda);
/*******************************************************************************
*
* Function BTM_BleClearBgConnDev
*
* Description This function is called to clear the whitelist,
* end any pending whitelist connections,
* and reset the local bg device list.
*
* Parameters void
*
* Returns void
*
******************************************************************************/
extern void BTM_BleClearBgConnDev(void);
/********************************************************
*
* Function BTM_BleSetPrefConnParams
*
* Description Set a peripheral's preferred connection parameters. When
* any of the value does not want to be updated while others
* do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to
* leave untouched.
*
* Parameters: bd_addr - BD address of the peripheral
* min_conn_int - minimum preferred connection interval
* max_conn_int - maximum preferred connection interval
* slave_latency - preferred slave latency
* supervision_tout - preferred supervision timeout
*
* Returns void
*
******************************************************************************/
extern void BTM_BleSetPrefConnParams(BD_ADDR bd_addr, uint16_t min_conn_int,
uint16_t max_conn_int,
uint16_t slave_latency,
uint16_t supervision_tout);
/******************************************************************************
*
* Function BTM_BleSetConnScanParams
*
* Description Set scan parameters used in BLE connection request
*
* Parameters: scan_interval - scan interval
* scan_window - scan window
*
* Returns void
*
******************************************************************************/
extern void BTM_BleSetConnScanParams(uint32_t scan_interval,
uint32_t scan_window);
/******************************************************************************
*
* Function BTM_BleReadControllerFeatures
*
* Description Reads BLE specific controller features
*
* Parameters: tBTM_BLE_CTRL_FEATURES_CBACK : Callback to notify when
* features are read
*
* Returns void
*
******************************************************************************/
extern void BTM_BleReadControllerFeatures(
tBTM_BLE_CTRL_FEATURES_CBACK* p_vsc_cback);
/*******************************************************************************
*
* Function BTM_CheckAdvData
*
* Description This function is called to get ADV data for a specific type.
*
* Parameters p_adv - pointer of ADV data
* type - finding ADV data type
* p_length - return the length of ADV data not including type
*
* Returns pointer of ADV data
*
******************************************************************************/
extern uint8_t* BTM_CheckAdvData(uint8_t* p_adv, uint8_t type,
uint8_t* p_length);
/*******************************************************************************
*
* Function BTM__BLEReadDiscoverability
*
* Description This function is called to read the current LE
* discoverability mode of the device.
*
* Returns BTM_BLE_NON_DISCOVERABLE ,BTM_BLE_LIMITED_DISCOVERABLE or
* BTM_BLE_GENRAL_DISCOVERABLE
*
******************************************************************************/
uint16_t BTM_BleReadDiscoverability();
/*******************************************************************************
*
* Function BTM__BLEReadConnectability
*
* Description This function is called to read the current LE
* connectibility mode of the device.
*
* Returns BTM_BLE_NON_CONNECTABLE or BTM_BLE_CONNECTABLE
*
******************************************************************************/
extern uint16_t BTM_BleReadConnectability();
/*******************************************************************************
*
* Function BTM_ReadDevInfo
*
* Description This function is called to read the device/address type
* of BD address.
*
* Parameter remote_bda: remote device address
* p_dev_type: output parameter to read the device type.
* p_addr_type: output parameter to read the address type.
*
******************************************************************************/
extern void BTM_ReadDevInfo(const BD_ADDR remote_bda,
tBT_DEVICE_TYPE* p_dev_type,
tBLE_ADDR_TYPE* p_addr_type);
/*******************************************************************************
*
* Function BTM_ReadConnectedTransportAddress
*
* Description This function is called to read the paired device/address
* type of other device paired corresponding to the BD_address
*
* Parameter remote_bda: remote device address, carry out the transport
* address
* transport: active transport
*
* Return true if an active link is identified; false otherwise
*
******************************************************************************/
extern bool BTM_ReadConnectedTransportAddress(BD_ADDR remote_bda,
tBT_TRANSPORT transport);
/*******************************************************************************
*
* Function BTM_BleConfigPrivacy
*
* Description This function is called to enable or disable the privacy in
* the local device.
*
* Parameters enable: true to enable it; false to disable it.
*
* Returns bool privacy mode set success; otherwise failed.
*
******************************************************************************/
extern bool BTM_BleConfigPrivacy(bool enable);
/*******************************************************************************
*
* Function BTM_BleLocalPrivacyEnabled
*
* Description Checks if local device supports private address
*
* Returns Return true if local privacy is enabled else false
*
******************************************************************************/
extern bool BTM_BleLocalPrivacyEnabled(void);
/*******************************************************************************
*
* Function BTM_BleEnableMixedPrivacyMode
*
* Description This function is called to enabled Mixed mode if privacy 1.2
* is applicable in controller.
*
* Parameters mixed_on: mixed mode to be used or not.
*
* Returns void
*
******************************************************************************/
extern void BTM_BleEnableMixedPrivacyMode(bool mixed_on);
/*******************************************************************************
*
* Function BTM_BleMaxMultiAdvInstanceCount
*
* Description Returns the maximum number of multi adv instances supported
* by the controller.
*
* Returns Max multi adv instance count
*
******************************************************************************/
extern uint8_t BTM_BleMaxMultiAdvInstanceCount();
/*******************************************************************************
*
* Function BTM_BleSetConnectableMode
*
* Description This function is called to set BLE connectable mode for a
* peripheral device.
*
* Parameters connectable_mode: directed connectable mode, or
* non-directed. It can be
* BTM_BLE_CONNECT_EVT,
* BTM_BLE_CONNECT_DIR_EVT or
* BTM_BLE_CONNECT_LO_DUTY_DIR_EVT
*
* Returns BTM_ILLEGAL_VALUE if controller does not support BLE.
* BTM_SUCCESS is status set successfully; otherwise failure.
*
******************************************************************************/
extern tBTM_STATUS BTM_BleSetConnectableMode(
tBTM_BLE_CONN_MODE connectable_mode);
/*******************************************************************************
*
* Function BTM_BleTurnOnPrivacyOnRemote
*
* Description This function is called to enable or disable the privacy on
* the remote device.
*
* Parameters bd_addr: remote device address.
* privacy_on: true to enable it; false to disable it.
*
* Returns void
*
******************************************************************************/
extern void BTM_BleTurnOnPrivacyOnRemote(BD_ADDR bd_addr, bool privacy_on);
/*******************************************************************************
*
* Function BTM_BleUpdateAdvFilterPolicy
*
* Description This function update the filter policy of advertiser.
*
* Parameter adv_policy: advertising filter policy
*
* Return void
******************************************************************************/
extern void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy);
/*******************************************************************************
*
* Function BTM_BleReceiverTest
*
* Description This function is called to start the LE Receiver test
*
* Parameter rx_freq - Frequency Range
* p_cmd_cmpl_cback - Command Complete callback
*
******************************************************************************/
void BTM_BleReceiverTest(uint8_t rx_freq, tBTM_CMPL_CB* p_cmd_cmpl_cback);
/*******************************************************************************
*
* Function BTM_BleTransmitterTest
*
* Description This function is called to start the LE Transmitter test
*
* Parameter tx_freq - Frequency Range
* test_data_len - Length in bytes of payload data in each
* packet
* packet_payload - Pattern to use in the payload
* p_cmd_cmpl_cback - Command Complete callback
*
******************************************************************************/
void BTM_BleTransmitterTest(uint8_t tx_freq, uint8_t test_data_len,
uint8_t packet_payload,
tBTM_CMPL_CB* p_cmd_cmpl_cback);
/*******************************************************************************
*
* Function BTM_BleTestEnd
*
* Description This function is called to stop the in-progress TX or RX test
*
* Parameter p_cmd_cmpl_cback - Command complete callback
*
******************************************************************************/
void BTM_BleTestEnd(tBTM_CMPL_CB* p_cmd_cmpl_cback);
/*******************************************************************************
*
* Function BTM_UseLeLink
*
* Description Select the underlying physical link to use.
*
* Returns true to use LE, false use BR/EDR.
*
******************************************************************************/
extern bool BTM_UseLeLink(BD_ADDR bd_addr);
/*******************************************************************************
*
* Function BTM_BleStackEnable
*
* Description Enable/Disable BLE functionality on stack regardless of
* controller capability.
*
* Parameters: enable: true to enable, false to disable.
*
* Returns true if added OK, else false
*
******************************************************************************/
extern tBTM_STATUS BTM_BleStackEnable(bool enable);
/*******************************************************************************
*
* Function BTM_GetLeSecurityState
*
* Description This function is called to get security mode 1 flags and
* encryption key size for LE peer.
*
* Returns bool true if LE device is found, false otherwise.
*
******************************************************************************/
extern bool BTM_GetLeSecurityState(BD_ADDR bd_addr, uint8_t* p_le_dev_sec_flags,
uint8_t* p_le_key_size);
/*******************************************************************************
*
* Function BTM_BleSecurityProcedureIsRunning
*
* Description This function indicates if LE security procedure is
* currently running with the peer.
*
* Returns bool true if security procedure is running, false otherwise.
*
******************************************************************************/
extern bool BTM_BleSecurityProcedureIsRunning(BD_ADDR bd_addr);
/*******************************************************************************
*
* Function BTM_BleGetSupportedKeySize
*
* Description This function gets the maximum encryption key size in bytes
* the local device can suport.
* record.
*
* Returns the key size or 0 if the size can't be retrieved.
*
******************************************************************************/
extern uint8_t BTM_BleGetSupportedKeySize(BD_ADDR bd_addr);
/*******************************************************************************
*
* Function BTM_BleAdvFilterParamSetup
*
* Description This function is called to setup the adv data payload filter
* condition.
*
* Parameters p_target: enabble the filter condition on a target device;
* if NULL enable the generic scan condition.
* enable: enable or disable the filter condition
*
* Returns void
*
******************************************************************************/
extern tBTM_STATUS BTM_BleAdvFilterParamSetup(
int action, tBTM_BLE_PF_FILT_INDEX filt_index,
tBTM_BLE_PF_FILT_PARAMS* p_filt_params, tBLE_BD_ADDR* p_target,
tBTM_BLE_PF_PARAM_CBACK* p_cmpl_cback, tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
*
* Function BTM_BleCfgFilterCondition
*
* Description This function is called to configure the adv data payload
* filter condition.
*
* Parameters action: to read/write/clear
* cond_type: filter condition type.
* p_cond: filter condition paramter
*
* Returns tBTM_STATUS
*
******************************************************************************/
extern tBTM_STATUS BTM_BleCfgFilterCondition(
tBTM_BLE_SCAN_COND_OP action, tBTM_BLE_PF_COND_TYPE cond_type,
tBTM_BLE_PF_FILT_INDEX filt_index, tBTM_BLE_PF_COND_PARAM* p_cond,
tBTM_BLE_PF_CFG_CBACK* p_cmpl_cback, tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
*
* Function BTM_BleEnableDisableFilterFeature
*
* Description Enable or disable the APCF feature
*
* Parameters enable - true - enables APCF, false - disables APCF
* ref_value - Ref value
*
* Returns tBTM_STATUS
*
******************************************************************************/
extern tBTM_STATUS BTM_BleEnableDisableFilterFeature(
uint8_t enable, tBTM_BLE_PF_STATUS_CBACK* p_stat_cback,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
*
* Function BTM_BleGetEnergyInfo
*
* Description This function obtains the energy info
*
* Parameters p_ener_cback - Callback pointer
*
* Returns status
*
******************************************************************************/
extern tBTM_STATUS BTM_BleGetEnergyInfo(
tBTM_BLE_ENERGY_INFO_CBACK* p_ener_cback);
/*******************************************************************************
*
* Function BTM_SetBleDataLength
*
* Description Set the maximum BLE transmission packet size
*
* Returns BTM_SUCCESS if success; otherwise failed.
*
******************************************************************************/
extern tBTM_STATUS BTM_SetBleDataLength(BD_ADDR bd_addr,
uint16_t tx_pdu_length);
extern void btm_ble_multi_adv_cleanup(void);
#endif