| /****************************************************************************** |
| * |
| * Copyright (C) 2000-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /***************************************************************************** |
| ** |
| ** Name: btm_acl.cc |
| ** |
| ** Description: This file contains functions that handle ACL connections. |
| ** This includes operations such as hold and sniff modes, |
| ** supported packet types. |
| ** |
| ** This module contains both internal and external (API) |
| ** functions. External (API) functions are distinguishable |
| ** by their names beginning with uppercase BTM. |
| ** |
| ** |
| ******************************************************************************/ |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include <stdio.h> |
| #include <stddef.h> |
| |
| #include "bt_types.h" |
| #include "bt_target.h" |
| #include "device/include/controller.h" |
| #include "bt_common.h" |
| #include "hcimsgs.h" |
| #include "btu.h" |
| #include "btm_api.h" |
| #include "btm_int.h" |
| #include "l2c_int.h" |
| #include "hcidefs.h" |
| #include "bt_utils.h" |
| |
| |
| extern fixed_queue_t *btu_general_alarm_queue; |
| |
| static void btm_read_remote_features (uint16_t handle); |
| static void btm_read_remote_ext_features (uint16_t handle, uint8_t page_number); |
| static void btm_process_remote_ext_features (tACL_CONN *p_acl_cb, uint8_t num_read_pages); |
| |
| /* 3 seconds timeout waiting for responses */ |
| #define BTM_DEV_REPLY_TIMEOUT_MS (3 * 1000) |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_init |
| ** |
| ** Description This function is called at BTM startup to initialize |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_acl_init (void) |
| { |
| BTM_TRACE_DEBUG ("btm_acl_init"); |
| /* Initialize nonzero defaults */ |
| btm_cb.btm_def_link_super_tout = HCI_DEFAULT_INACT_TOUT; |
| btm_cb.acl_disc_reason = 0xff ; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_bda_to_acl |
| ** |
| ** Description This function returns the FIRST acl_db entry for the passed BDA. |
| ** |
| ** Parameters bda : BD address of the remote device |
| ** transport : Physical transport used for ACL connection (BR/EDR or LE) |
| ** |
| ** Returns Returns pointer to the ACL DB for the requested BDA if found. |
| ** NULL if not found. |
| ** |
| *******************************************************************************/ |
| tACL_CONN *btm_bda_to_acl (const BD_ADDR bda, tBT_TRANSPORT transport) |
| { |
| tACL_CONN *p = &btm_cb.acl_db[0]; |
| uint16_t xx; |
| if (bda) |
| { |
| for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p++) |
| { |
| if ((p->in_use) && (!memcmp (p->remote_addr, bda, BD_ADDR_LEN)) |
| #if (BLE_INCLUDED == TRUE) |
| && p->transport == transport |
| #endif |
| ) |
| { |
| BTM_TRACE_DEBUG ("btm_bda_to_acl found"); |
| return(p); |
| } |
| } |
| } |
| |
| /* If here, no BD Addr found */ |
| return((tACL_CONN *)NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_handle_to_acl_index |
| ** |
| ** Description This function returns the FIRST acl_db entry for the passed hci_handle. |
| ** |
| ** Returns index to the acl_db or MAX_L2CAP_LINKS. |
| ** |
| *******************************************************************************/ |
| uint8_t btm_handle_to_acl_index (uint16_t hci_handle) |
| { |
| tACL_CONN *p = &btm_cb.acl_db[0]; |
| uint8_t xx; |
| BTM_TRACE_DEBUG ("btm_handle_to_acl_index"); |
| for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p++) |
| { |
| if ((p->in_use) && (p->hci_handle == hci_handle)) |
| { |
| break; |
| } |
| } |
| |
| /* If here, no BD Addr found */ |
| return(xx); |
| } |
| |
| #if (BLE_PRIVACY_SPT == TRUE) |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_get_acl_remote_addr |
| ** |
| ** Description This function reads the active remote address used for the |
| ** connection. |
| ** |
| ** Returns success return true, otherwise false. |
| ** |
| *******************************************************************************/ |
| bool btm_ble_get_acl_remote_addr(tBTM_SEC_DEV_REC *p_dev_rec, BD_ADDR conn_addr, |
| tBLE_ADDR_TYPE *p_addr_type) |
| { |
| #if (BLE_INCLUDED == TRUE) |
| bool st = true; |
| |
| if (p_dev_rec == NULL) |
| { |
| BTM_TRACE_ERROR("btm_ble_get_acl_remote_addr can not find device with matching address"); |
| return false; |
| } |
| |
| switch (p_dev_rec->ble.active_addr_type) |
| { |
| case BTM_BLE_ADDR_PSEUDO: |
| memcpy(conn_addr, p_dev_rec->bd_addr, BD_ADDR_LEN); |
| * p_addr_type = p_dev_rec->ble.ble_addr_type; |
| break; |
| |
| case BTM_BLE_ADDR_RRA: |
| memcpy(conn_addr, p_dev_rec->ble.cur_rand_addr, BD_ADDR_LEN); |
| * p_addr_type = BLE_ADDR_RANDOM; |
| break; |
| |
| case BTM_BLE_ADDR_STATIC: |
| memcpy(conn_addr, p_dev_rec->ble.static_addr, BD_ADDR_LEN); |
| * p_addr_type = p_dev_rec->ble.static_addr_type; |
| break; |
| |
| default: |
| BTM_TRACE_ERROR("Unknown active address: %d", p_dev_rec->ble.active_addr_type); |
| st = false; |
| break; |
| } |
| |
| return st; |
| #else |
| UNUSED(p_dev_rec); |
| UNUSED(conn_addr); |
| UNUSED(p_addr_type); |
| return false; |
| #endif |
| } |
| #endif |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_created |
| ** |
| ** Description This function is called by L2CAP when an ACL connection |
| ** is created. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_acl_created (BD_ADDR bda, DEV_CLASS dc, BD_NAME bdn, |
| uint16_t hci_handle, uint8_t link_role, tBT_TRANSPORT transport) |
| { |
| tBTM_SEC_DEV_REC *p_dev_rec = NULL; |
| tACL_CONN *p; |
| uint8_t xx; |
| |
| BTM_TRACE_DEBUG ("btm_acl_created hci_handle=%d link_role=%d transport=%d", |
| hci_handle,link_role, transport); |
| /* Ensure we don't have duplicates */ |
| p = btm_bda_to_acl(bda, transport); |
| if (p != (tACL_CONN *)NULL) |
| { |
| p->hci_handle = hci_handle; |
| p->link_role = link_role; |
| #if (BLE_INCLUDED == TRUE) |
| p->transport = transport; |
| #endif |
| BTM_TRACE_DEBUG ("Duplicate btm_acl_created: RemBdAddr: %02x%02x%02x%02x%02x%02x", |
| bda[0], bda[1], bda[2], bda[3], bda[4], bda[5]); |
| BTM_SetLinkPolicy(p->remote_addr, &btm_cb.btm_def_link_policy); |
| return; |
| } |
| |
| /* Allocate acl_db entry */ |
| for (xx = 0, p = &btm_cb.acl_db[0]; xx < MAX_L2CAP_LINKS; xx++, p++) |
| { |
| if (!p->in_use) |
| { |
| p->in_use = true; |
| p->hci_handle = hci_handle; |
| p->link_role = link_role; |
| p->link_up_issued = false; |
| memcpy (p->remote_addr, bda, BD_ADDR_LEN); |
| |
| #if (BLE_INCLUDED == TRUE) |
| p->transport = transport; |
| #if (BLE_PRIVACY_SPT == TRUE) |
| if (transport == BT_TRANSPORT_LE) |
| btm_ble_refresh_local_resolvable_private_addr(bda, |
| btm_cb.ble_ctr_cb.addr_mgnt_cb.private_addr); |
| #else |
| p->conn_addr_type = BLE_ADDR_PUBLIC; |
| memcpy(p->conn_addr, &controller_get_interface()->get_address()->address, BD_ADDR_LEN); |
| |
| #endif |
| #endif |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE; |
| |
| btm_pm_sm_alloc(xx); |
| |
| |
| if (dc) |
| memcpy (p->remote_dc, dc, DEV_CLASS_LEN); |
| |
| if (bdn) |
| memcpy (p->remote_name, bdn, BTM_MAX_REM_BD_NAME_LEN); |
| |
| /* if BR/EDR do something more */ |
| if (transport == BT_TRANSPORT_BR_EDR) |
| { |
| btsnd_hcic_read_rmt_clk_offset (p->hci_handle); |
| btsnd_hcic_rmt_ver_req (p->hci_handle); |
| } |
| p_dev_rec = btm_find_dev_by_handle (hci_handle); |
| |
| #if (BLE_INCLUDED == TRUE) |
| if (p_dev_rec ) |
| { |
| BTM_TRACE_DEBUG ("device_type=0x%x", p_dev_rec->device_type); |
| } |
| #endif |
| |
| if (p_dev_rec && !(transport == BT_TRANSPORT_LE)) |
| { |
| /* If remote features already known, copy them and continue connection setup */ |
| if ((p_dev_rec->num_read_pages) && |
| (p_dev_rec->num_read_pages <= (HCI_EXT_FEATURES_PAGE_MAX + 1))) |
| { |
| memcpy (p->peer_lmp_features, p_dev_rec->features, |
| (HCI_FEATURE_BYTES_PER_PAGE * p_dev_rec->num_read_pages)); |
| p->num_read_pages = p_dev_rec->num_read_pages; |
| |
| const uint8_t req_pend = (p_dev_rec->sm4 & BTM_SM4_REQ_PEND); |
| |
| /* Store the Peer Security Capabilites (in SM4 and rmt_sec_caps) */ |
| btm_sec_set_peer_sec_caps(p, p_dev_rec); |
| |
| BTM_TRACE_API("%s: pend:%d", __func__, req_pend); |
| if (req_pend) |
| { |
| /* Request for remaining Security Features (if any) */ |
| l2cu_resubmit_pending_sec_req (p_dev_rec->bd_addr); |
| } |
| btm_establish_continue (p); |
| return; |
| } |
| } |
| |
| #if (BLE_INCLUDED == TRUE) |
| /* If here, features are not known yet */ |
| if (p_dev_rec && transport == BT_TRANSPORT_LE) |
| { |
| #if (BLE_PRIVACY_SPT == TRUE) |
| btm_ble_get_acl_remote_addr (p_dev_rec, p->active_remote_addr, |
| &p->active_remote_addr_type); |
| #endif |
| |
| if (HCI_LE_SLAVE_INIT_FEAT_EXC_SUPPORTED(controller_get_interface()->get_features_ble()->as_array) |
| || link_role == HCI_ROLE_MASTER) |
| { |
| btsnd_hcic_ble_read_remote_feat(p->hci_handle); |
| } |
| else |
| { |
| btm_establish_continue(p); |
| } |
| } |
| else |
| #endif |
| { |
| btm_read_remote_features (p->hci_handle); |
| } |
| |
| /* read page 1 - on rmt feature event for buffer reasons */ |
| return; |
| } |
| } |
| } |
| |
| void btm_acl_update_conn_addr(uint8_t conn_handle, BD_ADDR address) { |
| uint8_t idx = btm_handle_to_acl_index(conn_handle); |
| if (idx != MAX_L2CAP_LINKS) { |
| memcpy(btm_cb.acl_db[idx].conn_addr, address, BD_ADDR_LEN); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_report_role_change |
| ** |
| ** Description This function is called when the local device is deemed |
| ** to be down. It notifies L2CAP of the failure. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_acl_report_role_change (uint8_t hci_status, BD_ADDR bda) |
| { |
| tBTM_ROLE_SWITCH_CMPL ref_data; |
| BTM_TRACE_DEBUG ("btm_acl_report_role_change"); |
| if (btm_cb.devcb.p_switch_role_cb |
| && (bda && (0 == memcmp(btm_cb.devcb.switch_role_ref_data.remote_bd_addr, bda, BD_ADDR_LEN)))) |
| { |
| memcpy (&ref_data, &btm_cb.devcb.switch_role_ref_data, sizeof(tBTM_ROLE_SWITCH_CMPL)); |
| ref_data.hci_status = hci_status; |
| (*btm_cb.devcb.p_switch_role_cb)(&ref_data); |
| memset (&btm_cb.devcb.switch_role_ref_data, 0, sizeof(tBTM_ROLE_SWITCH_CMPL)); |
| btm_cb.devcb.p_switch_role_cb = NULL; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_removed |
| ** |
| ** Description This function is called by L2CAP when an ACL connection |
| ** is removed. Since only L2CAP creates ACL links, we use |
| ** the L2CAP link index as our index into the control blocks. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_acl_removed (BD_ADDR bda, tBT_TRANSPORT transport) |
| { |
| tACL_CONN *p; |
| tBTM_BL_EVENT_DATA evt_data; |
| #if (BLE_INCLUDED == TRUE) |
| tBTM_SEC_DEV_REC *p_dev_rec=NULL; |
| #endif |
| BTM_TRACE_DEBUG ("btm_acl_removed"); |
| p = btm_bda_to_acl(bda, transport); |
| if (p != (tACL_CONN *)NULL) |
| { |
| p->in_use = false; |
| |
| /* if the disconnected channel has a pending role switch, clear it now */ |
| btm_acl_report_role_change(HCI_ERR_NO_CONNECTION, bda); |
| |
| /* Only notify if link up has had a chance to be issued */ |
| if (p->link_up_issued) |
| { |
| p->link_up_issued = false; |
| |
| /* If anyone cares, tell him database changed */ |
| if (btm_cb.p_bl_changed_cb) |
| { |
| evt_data.event = BTM_BL_DISCN_EVT; |
| evt_data.discn.p_bda = bda; |
| #if (BLE_INCLUDED == TRUE) |
| evt_data.discn.handle = p->hci_handle; |
| evt_data.discn.transport = p->transport; |
| #endif |
| (*btm_cb.p_bl_changed_cb)(&evt_data); |
| } |
| |
| btm_acl_update_busy_level (BTM_BLI_ACL_DOWN_EVT); |
| } |
| |
| #if (BLE_INCLUDED == TRUE) |
| |
| BTM_TRACE_DEBUG ("acl hci_handle=%d transport=%d connectable_mode=0x%0x link_role=%d", |
| p->hci_handle, |
| p->transport, |
| btm_cb.ble_ctr_cb.inq_var.connectable_mode, |
| p->link_role); |
| |
| p_dev_rec = btm_find_dev(bda); |
| if ( p_dev_rec) |
| { |
| BTM_TRACE_DEBUG("before update p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags); |
| if (p->transport == BT_TRANSPORT_LE) |
| { |
| BTM_TRACE_DEBUG("LE link down"); |
| p_dev_rec->sec_flags &= ~(BTM_SEC_LE_ENCRYPTED | BTM_SEC_ROLE_SWITCHED); |
| if ( (p_dev_rec->sec_flags & BTM_SEC_LE_LINK_KEY_KNOWN) == 0) |
| { |
| BTM_TRACE_DEBUG("Not Bonded"); |
| p_dev_rec->sec_flags &= ~(BTM_SEC_LE_LINK_KEY_AUTHED | BTM_SEC_LE_AUTHENTICATED); |
| } |
| else |
| { |
| BTM_TRACE_DEBUG("Bonded"); |
| } |
| } |
| else |
| { |
| BTM_TRACE_DEBUG("Bletooth link down"); |
| p_dev_rec->sec_flags &= ~(BTM_SEC_AUTHORIZED | BTM_SEC_AUTHENTICATED |
| | BTM_SEC_ENCRYPTED | BTM_SEC_ROLE_SWITCHED); |
| } |
| BTM_TRACE_DEBUG("after update p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags); |
| } |
| else |
| { |
| BTM_TRACE_ERROR("Device not found"); |
| |
| } |
| #endif |
| |
| /* Clear the ACL connection data */ |
| memset(p, 0, sizeof(tACL_CONN)); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_device_down |
| ** |
| ** Description This function is called when the local device is deemed |
| ** to be down. It notifies L2CAP of the failure. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_acl_device_down (void) |
| { |
| tACL_CONN *p = &btm_cb.acl_db[0]; |
| uint16_t xx; |
| BTM_TRACE_DEBUG ("btm_acl_device_down"); |
| for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p++) |
| { |
| if (p->in_use) |
| { |
| BTM_TRACE_DEBUG ("hci_handle=%d HCI_ERR_HW_FAILURE ",p->hci_handle ); |
| l2c_link_hci_disc_comp (p->hci_handle, HCI_ERR_HW_FAILURE); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_update_busy_level |
| ** |
| ** Description This function is called to update the busy level of the system |
| ** . |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_acl_update_busy_level (tBTM_BLI_EVENT event) |
| { |
| bool old_inquiry_state = btm_cb.is_inquiry; |
| tBTM_BL_UPDATE_DATA evt; |
| evt.busy_level_flags = 0; |
| switch (event) |
| { |
| case BTM_BLI_ACL_UP_EVT: |
| BTM_TRACE_DEBUG ("BTM_BLI_ACL_UP_EVT"); |
| break; |
| case BTM_BLI_ACL_DOWN_EVT: |
| BTM_TRACE_DEBUG ("BTM_BLI_ACL_DOWN_EVT"); |
| break; |
| case BTM_BLI_PAGE_EVT: |
| BTM_TRACE_DEBUG ("BTM_BLI_PAGE_EVT"); |
| btm_cb.is_paging = true; |
| evt.busy_level_flags= BTM_BL_PAGING_STARTED; |
| break; |
| case BTM_BLI_PAGE_DONE_EVT: |
| BTM_TRACE_DEBUG ("BTM_BLI_PAGE_DONE_EVT"); |
| btm_cb.is_paging = false; |
| evt.busy_level_flags = BTM_BL_PAGING_COMPLETE; |
| break; |
| case BTM_BLI_INQ_EVT: |
| BTM_TRACE_DEBUG ("BTM_BLI_INQ_EVT"); |
| btm_cb.is_inquiry = true; |
| evt.busy_level_flags = BTM_BL_INQUIRY_STARTED; |
| break; |
| case BTM_BLI_INQ_CANCEL_EVT: |
| BTM_TRACE_DEBUG ("BTM_BLI_INQ_CANCEL_EVT"); |
| btm_cb.is_inquiry = false; |
| evt.busy_level_flags = BTM_BL_INQUIRY_CANCELLED; |
| break; |
| case BTM_BLI_INQ_DONE_EVT: |
| BTM_TRACE_DEBUG ("BTM_BLI_INQ_DONE_EVT"); |
| btm_cb.is_inquiry = false; |
| evt.busy_level_flags = BTM_BL_INQUIRY_COMPLETE; |
| break; |
| } |
| |
| uint8_t busy_level; |
| if (btm_cb.is_paging || btm_cb.is_inquiry) |
| busy_level = 10; |
| else |
| busy_level = BTM_GetNumAclLinks(); |
| |
| if ((busy_level != btm_cb.busy_level) ||(old_inquiry_state != btm_cb.is_inquiry)) |
| { |
| evt.event = BTM_BL_UPDATE_EVT; |
| evt.busy_level = busy_level; |
| btm_cb.busy_level = busy_level; |
| if (btm_cb.p_bl_changed_cb && (btm_cb.bl_evt_mask & BTM_BL_UPDATE_MASK)) |
| { |
| (*btm_cb.p_bl_changed_cb)((tBTM_BL_EVENT_DATA *)&evt); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetRole |
| ** |
| ** Description This function is called to get the role of the local device |
| ** for the ACL connection with the specified remote device |
| ** |
| ** Returns BTM_SUCCESS if connection exists. |
| ** BTM_UNKNOWN_ADDR if no active link with bd addr specified |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_GetRole (BD_ADDR remote_bd_addr, uint8_t *p_role) |
| { |
| tACL_CONN *p; |
| BTM_TRACE_DEBUG ("BTM_GetRole"); |
| if ((p = btm_bda_to_acl(remote_bd_addr, BT_TRANSPORT_BR_EDR)) == NULL) |
| { |
| *p_role = BTM_ROLE_UNDEFINED; |
| return(BTM_UNKNOWN_ADDR); |
| } |
| |
| /* Get the current role */ |
| *p_role = p->link_role; |
| return(BTM_SUCCESS); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SwitchRole |
| ** |
| ** Description This function is called to switch role between master and |
| ** slave. If role is already set it will do nothing. If the |
| ** command was initiated, the callback function is called upon |
| ** completion. |
| ** |
| ** Returns BTM_SUCCESS if already in specified role. |
| ** BTM_CMD_STARTED if command issued to controller. |
| ** BTM_NO_RESOURCES if couldn't allocate memory to issue command |
| ** BTM_UNKNOWN_ADDR if no active link with bd addr specified |
| ** BTM_MODE_UNSUPPORTED if local device does not support role switching |
| ** BTM_BUSY if the previous command is not completed |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_SwitchRole (BD_ADDR remote_bd_addr, uint8_t new_role, tBTM_CMPL_CB *p_cb) |
| { |
| tACL_CONN *p; |
| tBTM_SEC_DEV_REC *p_dev_rec = NULL; |
| #if (BTM_SCO_INCLUDED == TRUE) |
| bool is_sco_active; |
| #endif |
| tBTM_STATUS status; |
| tBTM_PM_MODE pwr_mode; |
| tBTM_PM_PWR_MD settings; |
| BD_ADDR_PTR p_bda; |
| BTM_TRACE_API ("BTM_SwitchRole BDA: %02x-%02x-%02x-%02x-%02x-%02x", |
| remote_bd_addr[0], remote_bd_addr[1], remote_bd_addr[2], |
| remote_bd_addr[3], remote_bd_addr[4], remote_bd_addr[5]); |
| |
| /* Make sure the local device supports switching */ |
| if (!controller_get_interface()->supports_master_slave_role_switch()) |
| return(BTM_MODE_UNSUPPORTED); |
| |
| if (btm_cb.devcb.p_switch_role_cb && p_cb) |
| { |
| p_bda = btm_cb.devcb.switch_role_ref_data.remote_bd_addr; |
| BTM_TRACE_DEBUG ("Role switch on other device is in progress 0x%02x%02x%02x%02x%02x%02x", |
| p_bda[0], p_bda[1], p_bda[2], |
| p_bda[3], p_bda[4], p_bda[5]); |
| return(BTM_BUSY); |
| } |
| |
| if ((p = btm_bda_to_acl(remote_bd_addr, BT_TRANSPORT_BR_EDR)) == NULL) |
| return(BTM_UNKNOWN_ADDR); |
| |
| /* Finished if already in desired role */ |
| if (p->link_role == new_role) |
| return(BTM_SUCCESS); |
| |
| #if (BTM_SCO_INCLUDED == TRUE) |
| /* Check if there is any SCO Active on this BD Address */ |
| is_sco_active = btm_is_sco_active_by_bdaddr(remote_bd_addr); |
| |
| if (is_sco_active == true) |
| return(BTM_NO_RESOURCES); |
| #endif |
| |
| /* Ignore role switch request if the previous request was not completed */ |
| if (p->switch_role_state != BTM_ACL_SWKEY_STATE_IDLE) |
| { |
| BTM_TRACE_DEBUG ("BTM_SwitchRole busy: %d", |
| p->switch_role_state); |
| return(BTM_BUSY); |
| } |
| |
| if ((status = BTM_ReadPowerMode(p->remote_addr, &pwr_mode)) != BTM_SUCCESS) |
| return(status); |
| |
| /* Wake up the link if in sniff or park before attempting switch */ |
| if (pwr_mode == BTM_PM_MD_PARK || pwr_mode == BTM_PM_MD_SNIFF) |
| { |
| memset( (void*)&settings, 0, sizeof(settings)); |
| settings.mode = BTM_PM_MD_ACTIVE; |
| status = BTM_SetPowerMode (BTM_PM_SET_ONLY_ID, p->remote_addr, &settings); |
| if (status != BTM_CMD_STARTED) |
| return(BTM_WRONG_MODE); |
| |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_MODE_CHANGE; |
| } |
| /* some devices do not support switch while encryption is on */ |
| else |
| { |
| p_dev_rec = btm_find_dev (remote_bd_addr); |
| if ((p_dev_rec != NULL) |
| && ((p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED) != 0) |
| && !BTM_EPR_AVAILABLE(p)) |
| { |
| /* bypass turning off encryption if change link key is already doing it */ |
| if (p->encrypt_state != BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF) |
| { |
| btsnd_hcic_set_conn_encrypt (p->hci_handle, false); |
| p->encrypt_state = BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF; |
| } |
| |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF; |
| } |
| else |
| { |
| btsnd_hcic_switch_role (remote_bd_addr, new_role); |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_IN_PROGRESS; |
| |
| #if (BTM_DISC_DURING_RS == TRUE) |
| if (p_dev_rec) |
| p_dev_rec->rs_disc_pending = BTM_SEC_RS_PENDING; |
| #endif |
| } |
| } |
| |
| /* Initialize return structure in case request fails */ |
| if (p_cb) |
| { |
| memcpy (btm_cb.devcb.switch_role_ref_data.remote_bd_addr, remote_bd_addr, |
| BD_ADDR_LEN); |
| btm_cb.devcb.switch_role_ref_data.role = new_role; |
| /* initialized to an error code */ |
| btm_cb.devcb.switch_role_ref_data.hci_status = HCI_ERR_UNSUPPORTED_VALUE; |
| btm_cb.devcb.p_switch_role_cb = p_cb; |
| } |
| return(BTM_CMD_STARTED); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_encrypt_change |
| ** |
| ** Description This function is when encryption of the connection is |
| ** completed by the LM. Checks to see if a role switch or |
| ** change of link key was active and initiates or continues |
| ** process if needed. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_acl_encrypt_change (uint16_t handle, uint8_t status, uint8_t encr_enable) |
| { |
| tACL_CONN *p; |
| uint8_t xx; |
| tBTM_SEC_DEV_REC *p_dev_rec; |
| tBTM_BL_ROLE_CHG_DATA evt; |
| |
| BTM_TRACE_DEBUG ("btm_acl_encrypt_change handle=%d status=%d encr_enabl=%d", |
| handle, status, encr_enable); |
| xx = btm_handle_to_acl_index(handle); |
| /* don't assume that we can never get a bad hci_handle */ |
| if (xx < MAX_L2CAP_LINKS) |
| p = &btm_cb.acl_db[xx]; |
| else |
| return; |
| |
| /* Process Role Switch if active */ |
| if (p->switch_role_state == BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF) |
| { |
| /* if encryption turn off failed we still will try to switch role */ |
| if (encr_enable) |
| { |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE; |
| p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE; |
| } |
| else |
| { |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_SWITCHING; |
| p->encrypt_state = BTM_ACL_ENCRYPT_STATE_TEMP_FUNC; |
| } |
| |
| btsnd_hcic_switch_role(p->remote_addr, (uint8_t)!p->link_role); |
| #if (BTM_DISC_DURING_RS == TRUE) |
| if ((p_dev_rec = btm_find_dev (p->remote_addr)) != NULL) |
| p_dev_rec->rs_disc_pending = BTM_SEC_RS_PENDING; |
| #endif |
| |
| } |
| /* Finished enabling Encryption after role switch */ |
| else if (p->switch_role_state == BTM_ACL_SWKEY_STATE_ENCRYPTION_ON) |
| { |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE; |
| p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE; |
| btm_acl_report_role_change(btm_cb.devcb.switch_role_ref_data.hci_status, p->remote_addr); |
| |
| /* if role change event is registered, report it now */ |
| if (btm_cb.p_bl_changed_cb && (btm_cb.bl_evt_mask & BTM_BL_ROLE_CHG_MASK)) |
| { |
| evt.event = BTM_BL_ROLE_CHG_EVT; |
| evt.new_role = btm_cb.devcb.switch_role_ref_data.role; |
| evt.p_bda = btm_cb.devcb.switch_role_ref_data.remote_bd_addr; |
| evt.hci_status = btm_cb.devcb.switch_role_ref_data.hci_status; |
| (*btm_cb.p_bl_changed_cb)((tBTM_BL_EVENT_DATA *)&evt); |
| |
| BTM_TRACE_DEBUG("Role Switch Event: new_role 0x%02x, HCI Status 0x%02x, rs_st:%d", |
| evt.new_role, evt.hci_status, p->switch_role_state); |
| } |
| |
| #if (BTM_DISC_DURING_RS == TRUE) |
| /* If a disconnect is pending, issue it now that role switch has completed */ |
| if ((p_dev_rec = btm_find_dev (p->remote_addr)) != NULL) |
| { |
| if (p_dev_rec->rs_disc_pending == BTM_SEC_DISC_PENDING) |
| { |
| BTM_TRACE_WARNING("btm_acl_encrypt_change -> Issuing delayed HCI_Disconnect!!!"); |
| btsnd_hcic_disconnect(p_dev_rec->hci_handle, HCI_ERR_PEER_USER); |
| } |
| BTM_TRACE_ERROR("btm_acl_encrypt_change: tBTM_SEC_DEV:0x%x rs_disc_pending=%d", |
| PTR_TO_UINT(p_dev_rec), p_dev_rec->rs_disc_pending); |
| p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING; /* reset flag */ |
| } |
| #endif |
| } |
| } |
| /******************************************************************************* |
| ** |
| ** Function BTM_SetLinkPolicy |
| ** |
| ** Description Create and send HCI "Write Policy Set" command |
| ** |
| ** Returns status of the operation |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_SetLinkPolicy (BD_ADDR remote_bda, uint16_t *settings) |
| { |
| tACL_CONN *p; |
| uint8_t *localFeatures = BTM_ReadLocalFeatures(); |
| BTM_TRACE_DEBUG ("BTM_SetLinkPolicy"); |
| /* BTM_TRACE_API ("BTM_SetLinkPolicy: requested settings: 0x%04x", *settings ); */ |
| |
| /* First, check if hold mode is supported */ |
| if (*settings != HCI_DISABLE_ALL_LM_MODES) |
| { |
| if ( (*settings & HCI_ENABLE_MASTER_SLAVE_SWITCH) && (!HCI_SWITCH_SUPPORTED(localFeatures)) ) |
| { |
| *settings &= (~HCI_ENABLE_MASTER_SLAVE_SWITCH); |
| BTM_TRACE_API ("BTM_SetLinkPolicy switch not supported (settings: 0x%04x)", *settings ); |
| } |
| if ( (*settings & HCI_ENABLE_HOLD_MODE) && (!HCI_HOLD_MODE_SUPPORTED(localFeatures)) ) |
| { |
| *settings &= (~HCI_ENABLE_HOLD_MODE); |
| BTM_TRACE_API ("BTM_SetLinkPolicy hold not supported (settings: 0x%04x)", *settings ); |
| } |
| if ( (*settings & HCI_ENABLE_SNIFF_MODE) && (!HCI_SNIFF_MODE_SUPPORTED(localFeatures)) ) |
| { |
| *settings &= (~HCI_ENABLE_SNIFF_MODE); |
| BTM_TRACE_API ("BTM_SetLinkPolicy sniff not supported (settings: 0x%04x)", *settings ); |
| } |
| if ( (*settings & HCI_ENABLE_PARK_MODE) && (!HCI_PARK_MODE_SUPPORTED(localFeatures)) ) |
| { |
| *settings &= (~HCI_ENABLE_PARK_MODE); |
| BTM_TRACE_API ("BTM_SetLinkPolicy park not supported (settings: 0x%04x)", *settings ); |
| } |
| } |
| |
| if ((p = btm_bda_to_acl(remote_bda, BT_TRANSPORT_BR_EDR)) != NULL) { |
| btsnd_hcic_write_policy_set(p->hci_handle, *settings); |
| return BTM_CMD_STARTED; |
| } |
| |
| /* If here, no BD Addr found */ |
| return(BTM_UNKNOWN_ADDR); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SetDefaultLinkPolicy |
| ** |
| ** Description Set the default value for HCI "Write Policy Set" command |
| ** to use when an ACL link is created. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTM_SetDefaultLinkPolicy (uint16_t settings) |
| { |
| uint8_t *localFeatures = BTM_ReadLocalFeatures(); |
| |
| BTM_TRACE_DEBUG("BTM_SetDefaultLinkPolicy setting:0x%04x", settings); |
| |
| if((settings & HCI_ENABLE_MASTER_SLAVE_SWITCH) && (!HCI_SWITCH_SUPPORTED(localFeatures))) |
| { |
| settings &= ~HCI_ENABLE_MASTER_SLAVE_SWITCH; |
| BTM_TRACE_DEBUG("BTM_SetDefaultLinkPolicy switch not supported (settings: 0x%04x)", settings); |
| } |
| if ((settings & HCI_ENABLE_HOLD_MODE) && (!HCI_HOLD_MODE_SUPPORTED(localFeatures))) |
| { |
| settings &= ~HCI_ENABLE_HOLD_MODE; |
| BTM_TRACE_DEBUG("BTM_SetDefaultLinkPolicy hold not supported (settings: 0x%04x)", settings); |
| } |
| if ((settings & HCI_ENABLE_SNIFF_MODE) && (!HCI_SNIFF_MODE_SUPPORTED(localFeatures))) |
| { |
| settings &= ~HCI_ENABLE_SNIFF_MODE; |
| BTM_TRACE_DEBUG("BTM_SetDefaultLinkPolicy sniff not supported (settings: 0x%04x)", settings); |
| } |
| if ((settings & HCI_ENABLE_PARK_MODE) && (!HCI_PARK_MODE_SUPPORTED(localFeatures))) |
| { |
| settings &= ~HCI_ENABLE_PARK_MODE; |
| BTM_TRACE_DEBUG("BTM_SetDefaultLinkPolicy park not supported (settings: 0x%04x)", settings); |
| } |
| BTM_TRACE_DEBUG("Set DefaultLinkPolicy:0x%04x", settings); |
| |
| btm_cb.btm_def_link_policy = settings; |
| |
| /* Set the default Link Policy of the controller */ |
| btsnd_hcic_write_def_policy_set(settings); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_remote_version_complete |
| ** |
| ** Description This function is called when the command complete message |
| ** is received from the HCI for the remote version info. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_remote_version_complete (uint8_t *p) |
| { |
| tACL_CONN *p_acl_cb = &btm_cb.acl_db[0]; |
| uint8_t status; |
| uint16_t handle; |
| int xx; |
| BTM_TRACE_DEBUG ("btm_read_remote_version_complete"); |
| |
| STREAM_TO_UINT8 (status, p); |
| STREAM_TO_UINT16 (handle, p); |
| |
| /* Look up the connection by handle and copy features */ |
| for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_acl_cb++) |
| { |
| if ((p_acl_cb->in_use) && (p_acl_cb->hci_handle == handle)) |
| { |
| if (status == HCI_SUCCESS) |
| { |
| STREAM_TO_UINT8 (p_acl_cb->lmp_version, p); |
| STREAM_TO_UINT16 (p_acl_cb->manufacturer, p); |
| STREAM_TO_UINT16 (p_acl_cb->lmp_subversion, p); |
| } |
| |
| #if (BLE_INCLUDED == TRUE) |
| if (p_acl_cb->transport == BT_TRANSPORT_LE) |
| l2cble_notify_le_connection (p_acl_cb->remote_addr); |
| #endif // (defined(BLE_INCLUDED) && (BLE_INCLUDED == true)) |
| break; |
| } |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_process_remote_ext_features |
| ** |
| ** Description Local function called to process all extended features pages |
| ** read from a remote device. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_process_remote_ext_features (tACL_CONN *p_acl_cb, uint8_t num_read_pages) |
| { |
| uint16_t handle = p_acl_cb->hci_handle; |
| tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev_by_handle (handle); |
| uint8_t page_idx; |
| |
| BTM_TRACE_DEBUG ("btm_process_remote_ext_features"); |
| |
| /* Make sure we have the record to save remote features information */ |
| if (p_dev_rec == NULL) |
| { |
| /* Get a new device; might be doing dedicated bonding */ |
| p_dev_rec = btm_find_or_alloc_dev (p_acl_cb->remote_addr); |
| } |
| |
| p_acl_cb->num_read_pages = num_read_pages; |
| p_dev_rec->num_read_pages = num_read_pages; |
| |
| /* Move the pages to placeholder */ |
| for (page_idx = 0; page_idx < num_read_pages; page_idx++) |
| { |
| if (page_idx > HCI_EXT_FEATURES_PAGE_MAX) |
| { |
| BTM_TRACE_ERROR("%s: page=%d unexpected", __func__, page_idx); |
| break; |
| } |
| memcpy (p_dev_rec->features[page_idx], p_acl_cb->peer_lmp_features[page_idx], |
| HCI_FEATURE_BYTES_PER_PAGE); |
| } |
| |
| const uint8_t req_pend = (p_dev_rec->sm4 & BTM_SM4_REQ_PEND); |
| |
| /* Store the Peer Security Capabilites (in SM4 and rmt_sec_caps) */ |
| btm_sec_set_peer_sec_caps(p_acl_cb, p_dev_rec); |
| |
| BTM_TRACE_API("%s: pend:%d", __func__, req_pend); |
| if (req_pend) |
| { |
| /* Request for remaining Security Features (if any) */ |
| l2cu_resubmit_pending_sec_req (p_dev_rec->bd_addr); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_remote_features |
| ** |
| ** Description Local function called to send a read remote supported features/ |
| ** remote extended features page[0]. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_remote_features (uint16_t handle) |
| { |
| uint8_t acl_idx; |
| tACL_CONN *p_acl_cb; |
| |
| BTM_TRACE_DEBUG("btm_read_remote_features() handle: %d", handle); |
| |
| if ((acl_idx = btm_handle_to_acl_index(handle)) >= MAX_L2CAP_LINKS) |
| { |
| BTM_TRACE_ERROR("btm_read_remote_features handle=%d invalid", handle); |
| return; |
| } |
| |
| p_acl_cb = &btm_cb.acl_db[acl_idx]; |
| p_acl_cb->num_read_pages = 0; |
| memset (p_acl_cb->peer_lmp_features, 0, sizeof(p_acl_cb->peer_lmp_features)); |
| |
| /* first send read remote supported features HCI command */ |
| /* because we don't know whether the remote support extended feature command */ |
| btsnd_hcic_rmt_features_req (handle); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_remote_ext_features |
| ** |
| ** Description Local function called to send a read remote extended features |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_remote_ext_features (uint16_t handle, uint8_t page_number) |
| { |
| BTM_TRACE_DEBUG("btm_read_remote_ext_features() handle: %d page: %d", handle, page_number); |
| |
| btsnd_hcic_rmt_ext_features(handle, page_number); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_remote_features_complete |
| ** |
| ** Description This function is called when the remote supported features |
| ** complete event is received from the HCI. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_remote_features_complete (uint8_t *p) |
| { |
| tACL_CONN *p_acl_cb; |
| uint8_t status; |
| uint16_t handle; |
| uint8_t acl_idx; |
| |
| BTM_TRACE_DEBUG ("btm_read_remote_features_complete"); |
| STREAM_TO_UINT8 (status, p); |
| |
| if (status != HCI_SUCCESS) |
| { |
| BTM_TRACE_ERROR ("btm_read_remote_features_complete failed (status 0x%02x)", status); |
| return; |
| } |
| |
| STREAM_TO_UINT16 (handle, p); |
| |
| if ((acl_idx = btm_handle_to_acl_index(handle)) >= MAX_L2CAP_LINKS) |
| { |
| BTM_TRACE_ERROR("btm_read_remote_features_complete handle=%d invalid", handle); |
| return; |
| } |
| |
| p_acl_cb = &btm_cb.acl_db[acl_idx]; |
| |
| /* Copy the received features page */ |
| STREAM_TO_ARRAY(p_acl_cb->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0], p, |
| HCI_FEATURE_BYTES_PER_PAGE); |
| |
| if ((HCI_LMP_EXTENDED_SUPPORTED(p_acl_cb->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0])) && |
| (controller_get_interface()->supports_reading_remote_extended_features())) |
| { |
| /* if the remote controller has extended features and local controller supports |
| ** HCI_Read_Remote_Extended_Features command then start reading these feature starting |
| ** with extended features page 1 */ |
| BTM_TRACE_DEBUG ("Start reading remote extended features"); |
| btm_read_remote_ext_features(handle, HCI_EXT_FEATURES_PAGE_1); |
| return; |
| } |
| |
| /* Remote controller has no extended features. Process remote controller supported features |
| (features page HCI_EXT_FEATURES_PAGE_0). */ |
| btm_process_remote_ext_features (p_acl_cb, 1); |
| |
| /* Continue with HCI connection establishment */ |
| btm_establish_continue (p_acl_cb); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_remote_ext_features_complete |
| ** |
| ** Description This function is called when the remote extended features |
| ** complete event is received from the HCI. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_remote_ext_features_complete (uint8_t *p) |
| { |
| tACL_CONN *p_acl_cb; |
| uint8_t page_num, max_page; |
| uint16_t handle; |
| uint8_t acl_idx; |
| |
| BTM_TRACE_DEBUG ("btm_read_remote_ext_features_complete"); |
| |
| ++p; |
| STREAM_TO_UINT16 (handle, p); |
| STREAM_TO_UINT8 (page_num, p); |
| STREAM_TO_UINT8 (max_page, p); |
| |
| /* Validate parameters */ |
| if ((acl_idx = btm_handle_to_acl_index(handle)) >= MAX_L2CAP_LINKS) |
| { |
| BTM_TRACE_ERROR("btm_read_remote_ext_features_complete handle=%d invalid", handle); |
| return; |
| } |
| |
| if (max_page > HCI_EXT_FEATURES_PAGE_MAX) |
| { |
| BTM_TRACE_ERROR("btm_read_remote_ext_features_complete page=%d unknown", max_page); |
| return; |
| } |
| |
| p_acl_cb = &btm_cb.acl_db[acl_idx]; |
| |
| /* Copy the received features page */ |
| STREAM_TO_ARRAY(p_acl_cb->peer_lmp_features[page_num], p, HCI_FEATURE_BYTES_PER_PAGE); |
| |
| /* If there is the next remote features page and |
| * we have space to keep this page data - read this page */ |
| if ((page_num < max_page) && (page_num < HCI_EXT_FEATURES_PAGE_MAX)) |
| { |
| page_num++; |
| BTM_TRACE_DEBUG("BTM reads next remote extended features page (%d)", page_num); |
| btm_read_remote_ext_features (handle, page_num); |
| return; |
| } |
| |
| /* Reading of remote feature pages is complete */ |
| BTM_TRACE_DEBUG("BTM reached last remote extended features page (%d)", page_num); |
| |
| /* Process the pages */ |
| btm_process_remote_ext_features (p_acl_cb, (uint8_t) (page_num + 1)); |
| |
| /* Continue with HCI connection establishment */ |
| btm_establish_continue (p_acl_cb); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_remote_ext_features_failed |
| ** |
| ** Description This function is called when the remote extended features |
| ** complete event returns a failed status. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_remote_ext_features_failed (uint8_t status, uint16_t handle) |
| { |
| tACL_CONN *p_acl_cb; |
| uint8_t acl_idx; |
| |
| BTM_TRACE_WARNING ("btm_read_remote_ext_features_failed (status 0x%02x) for handle %d", |
| status, handle); |
| |
| if ((acl_idx = btm_handle_to_acl_index(handle)) >= MAX_L2CAP_LINKS) |
| { |
| BTM_TRACE_ERROR("btm_read_remote_ext_features_failed handle=%d invalid", handle); |
| return; |
| } |
| |
| p_acl_cb = &btm_cb.acl_db[acl_idx]; |
| |
| /* Process supported features only */ |
| btm_process_remote_ext_features (p_acl_cb, 1); |
| |
| /* Continue HCI connection establishment */ |
| btm_establish_continue (p_acl_cb); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_establish_continue |
| ** |
| ** Description This function is called when the command complete message |
| ** is received from the HCI for the read local link policy request. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_establish_continue (tACL_CONN *p_acl_cb) |
| { |
| tBTM_BL_EVENT_DATA evt_data; |
| BTM_TRACE_DEBUG ("btm_establish_continue"); |
| #if (BTM_BYPASS_EXTRA_ACL_SETUP == FALSE) |
| #if (BLE_INCLUDED == TRUE) |
| if (p_acl_cb->transport == BT_TRANSPORT_BR_EDR) |
| #endif |
| { |
| /* For now there are a some devices that do not like sending */ |
| /* commands events and data at the same time. */ |
| /* Set the packet types to the default allowed by the device */ |
| btm_set_packet_types (p_acl_cb, btm_cb.btm_acl_pkt_types_supported); |
| |
| if (btm_cb.btm_def_link_policy) |
| BTM_SetLinkPolicy (p_acl_cb->remote_addr, &btm_cb.btm_def_link_policy); |
| } |
| #endif |
| p_acl_cb->link_up_issued = true; |
| |
| /* If anyone cares, tell him database changed */ |
| if (btm_cb.p_bl_changed_cb) |
| { |
| evt_data.event = BTM_BL_CONN_EVT; |
| evt_data.conn.p_bda = p_acl_cb->remote_addr; |
| evt_data.conn.p_bdn = p_acl_cb->remote_name; |
| evt_data.conn.p_dc = p_acl_cb->remote_dc; |
| evt_data.conn.p_features = p_acl_cb->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0]; |
| #if (BLE_INCLUDED == TRUE) |
| evt_data.conn.handle = p_acl_cb->hci_handle; |
| evt_data.conn.transport = p_acl_cb->transport; |
| #endif |
| |
| (*btm_cb.p_bl_changed_cb)(&evt_data); |
| } |
| btm_acl_update_busy_level (BTM_BLI_ACL_UP_EVT); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SetDefaultLinkSuperTout |
| ** |
| ** Description Set the default value for HCI "Write Link Supervision Timeout" |
| ** command to use when an ACL link is created. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void BTM_SetDefaultLinkSuperTout (uint16_t timeout) |
| { |
| BTM_TRACE_DEBUG ("BTM_SetDefaultLinkSuperTout"); |
| btm_cb.btm_def_link_super_tout = timeout; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetLinkSuperTout |
| ** |
| ** Description Read the link supervision timeout value of the connection |
| ** |
| ** Returns status of the operation |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_GetLinkSuperTout (BD_ADDR remote_bda, uint16_t *p_timeout) |
| { |
| tACL_CONN *p = btm_bda_to_acl(remote_bda, BT_TRANSPORT_BR_EDR); |
| |
| BTM_TRACE_DEBUG ("BTM_GetLinkSuperTout"); |
| if (p != (tACL_CONN *)NULL) |
| { |
| *p_timeout = p->link_super_tout; |
| return(BTM_SUCCESS); |
| } |
| /* If here, no BD Addr found */ |
| return(BTM_UNKNOWN_ADDR); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SetLinkSuperTout |
| ** |
| ** Description Create and send HCI "Write Link Supervision Timeout" command |
| ** |
| ** Returns status of the operation |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_SetLinkSuperTout (BD_ADDR remote_bda, uint16_t timeout) |
| { |
| tACL_CONN *p = btm_bda_to_acl(remote_bda, BT_TRANSPORT_BR_EDR); |
| |
| BTM_TRACE_DEBUG ("BTM_SetLinkSuperTout"); |
| if (p != (tACL_CONN *)NULL) |
| { |
| p->link_super_tout = timeout; |
| |
| /* Only send if current role is Master; 2.0 spec requires this */ |
| if (p->link_role == BTM_ROLE_MASTER) |
| { |
| btsnd_hcic_write_link_super_tout(LOCAL_BR_EDR_CONTROLLER_ID, |
| p->hci_handle, timeout); |
| return(BTM_CMD_STARTED); |
| } |
| else |
| return(BTM_SUCCESS); |
| } |
| |
| /* If here, no BD Addr found */ |
| return(BTM_UNKNOWN_ADDR); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_IsAclConnectionUp |
| ** |
| ** Description This function is called to check if an ACL connection exists |
| ** to a specific remote BD Address. |
| ** |
| ** Returns true if connection is up, else false. |
| ** |
| *******************************************************************************/ |
| bool BTM_IsAclConnectionUp (BD_ADDR remote_bda, tBT_TRANSPORT transport) |
| { |
| tACL_CONN *p; |
| |
| BTM_TRACE_API ("BTM_IsAclConnectionUp: RemBdAddr: %02x%02x%02x%02x%02x%02x", |
| remote_bda[0], remote_bda[1], remote_bda[2], |
| remote_bda[3], remote_bda[4], remote_bda[5]); |
| |
| p = btm_bda_to_acl(remote_bda, transport); |
| if (p != (tACL_CONN *)NULL) |
| { |
| return(true); |
| } |
| |
| /* If here, no BD Addr found */ |
| return(false); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetNumAclLinks |
| ** |
| ** Description This function is called to count the number of |
| ** ACL links that are active. |
| ** |
| ** Returns uint16_t Number of active ACL links |
| ** |
| *******************************************************************************/ |
| uint16_t BTM_GetNumAclLinks (void) |
| { |
| uint16_t num_acl = 0; |
| |
| for (uint16_t i = 0; i < MAX_L2CAP_LINKS; ++i) |
| { |
| if (btm_cb.acl_db[i].in_use) |
| ++num_acl; |
| } |
| |
| return num_acl; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_get_acl_disc_reason_code |
| ** |
| ** Description This function is called to get the disconnection reason code |
| ** returned by the HCI at disconnection complete event. |
| ** |
| ** Returns true if connection is up, else false. |
| ** |
| *******************************************************************************/ |
| uint16_t btm_get_acl_disc_reason_code (void) |
| { |
| uint8_t res = btm_cb.acl_disc_reason; |
| BTM_TRACE_DEBUG ("btm_get_acl_disc_reason_code"); |
| return(res); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetHCIConnHandle |
| ** |
| ** Description This function is called to get the handle for an ACL connection |
| ** to a specific remote BD Address. |
| ** |
| ** Returns the handle of the connection, or 0xFFFF if none. |
| ** |
| *******************************************************************************/ |
| uint16_t BTM_GetHCIConnHandle (BD_ADDR remote_bda, tBT_TRANSPORT transport) |
| { |
| tACL_CONN *p; |
| BTM_TRACE_DEBUG ("BTM_GetHCIConnHandle"); |
| p = btm_bda_to_acl(remote_bda, transport); |
| if (p != (tACL_CONN *)NULL) |
| { |
| return(p->hci_handle); |
| } |
| |
| /* If here, no BD Addr found */ |
| return(0xFFFF); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_process_clk_off_comp_evt |
| ** |
| ** Description This function is called when clock offset command completes. |
| ** |
| ** Input Parms hci_handle - connection handle associated with the change |
| ** clock offset |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_process_clk_off_comp_evt (uint16_t hci_handle, uint16_t clock_offset) |
| { |
| uint8_t xx; |
| BTM_TRACE_DEBUG ("btm_process_clk_off_comp_evt"); |
| /* Look up the connection by handle and set the current mode */ |
| if ((xx = btm_handle_to_acl_index(hci_handle)) < MAX_L2CAP_LINKS) |
| btm_cb.acl_db[xx].clock_offset = clock_offset; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_role_changed |
| ** |
| ** Description This function is called whan a link's master/slave role change |
| ** event or command status event (with error) is received. |
| ** It updates the link control block, and calls |
| ** the registered callback with status and role (if registered). |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_acl_role_changed (uint8_t hci_status, BD_ADDR bd_addr, uint8_t new_role) |
| { |
| uint8_t *p_bda = (bd_addr) ? bd_addr : |
| btm_cb.devcb.switch_role_ref_data.remote_bd_addr; |
| tACL_CONN *p = btm_bda_to_acl(p_bda, BT_TRANSPORT_BR_EDR); |
| tBTM_ROLE_SWITCH_CMPL *p_data = &btm_cb.devcb.switch_role_ref_data; |
| tBTM_SEC_DEV_REC *p_dev_rec; |
| tBTM_BL_ROLE_CHG_DATA evt; |
| |
| BTM_TRACE_DEBUG ("btm_acl_role_changed"); |
| /* Ignore any stray events */ |
| if (p == NULL) |
| { |
| /* it could be a failure */ |
| if (hci_status != HCI_SUCCESS) |
| btm_acl_report_role_change(hci_status, bd_addr); |
| return; |
| } |
| |
| p_data->hci_status = hci_status; |
| |
| if (hci_status == HCI_SUCCESS) |
| { |
| p_data->role = new_role; |
| memcpy(p_data->remote_bd_addr, p_bda, BD_ADDR_LEN); |
| |
| /* Update cached value */ |
| p->link_role = new_role; |
| |
| /* Reload LSTO: link supervision timeout is reset in the LM after a role switch */ |
| if (new_role == BTM_ROLE_MASTER) |
| { |
| BTM_SetLinkSuperTout (p->remote_addr, p->link_super_tout); |
| } |
| } |
| else |
| { |
| /* so the BTM_BL_ROLE_CHG_EVT uses the old role */ |
| new_role = p->link_role; |
| } |
| |
| /* Check if any SCO req is pending for role change */ |
| btm_sco_chk_pend_rolechange (p->hci_handle); |
| |
| /* if switching state is switching we need to turn encryption on */ |
| /* if idle, we did not change encryption */ |
| if (p->switch_role_state == BTM_ACL_SWKEY_STATE_SWITCHING) |
| { |
| btsnd_hcic_set_conn_encrypt (p->hci_handle, true); |
| p->encrypt_state = BTM_ACL_ENCRYPT_STATE_ENCRYPT_ON; |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_ON; |
| return; |
| } |
| |
| /* Set the switch_role_state to IDLE since the reply received from HCI */ |
| /* regardless of its result either success or failed. */ |
| if (p->switch_role_state == BTM_ACL_SWKEY_STATE_IN_PROGRESS) |
| { |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE; |
| p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE; |
| } |
| |
| /* if role switch complete is needed, report it now */ |
| btm_acl_report_role_change(hci_status, bd_addr); |
| |
| /* if role change event is registered, report it now */ |
| if (btm_cb.p_bl_changed_cb && (btm_cb.bl_evt_mask & BTM_BL_ROLE_CHG_MASK)) |
| { |
| evt.event = BTM_BL_ROLE_CHG_EVT; |
| evt.new_role = new_role; |
| evt.p_bda = p_bda; |
| evt.hci_status = hci_status; |
| (*btm_cb.p_bl_changed_cb)((tBTM_BL_EVENT_DATA *)&evt); |
| } |
| |
| BTM_TRACE_DEBUG("Role Switch Event: new_role 0x%02x, HCI Status 0x%02x, rs_st:%d", |
| p_data->role, p_data->hci_status, p->switch_role_state); |
| |
| #if (BTM_DISC_DURING_RS == TRUE) |
| /* If a disconnect is pending, issue it now that role switch has completed */ |
| if ((p_dev_rec = btm_find_dev (p_bda)) != NULL) |
| { |
| if (p_dev_rec->rs_disc_pending == BTM_SEC_DISC_PENDING) |
| { |
| BTM_TRACE_WARNING("btm_acl_role_changed -> Issuing delayed HCI_Disconnect!!!"); |
| btsnd_hcic_disconnect(p_dev_rec->hci_handle, HCI_ERR_PEER_USER); |
| } |
| BTM_TRACE_ERROR("tBTM_SEC_DEV:0x%x rs_disc_pending=%d", |
| PTR_TO_UINT(p_dev_rec), p_dev_rec->rs_disc_pending); |
| p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING; /* reset flag */ |
| } |
| |
| #endif |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_AllocateSCN |
| ** |
| ** Description Look through the Server Channel Numbers for a free one. |
| ** |
| ** Returns Allocated SCN number or 0 if none. |
| ** |
| *******************************************************************************/ |
| |
| uint8_t BTM_AllocateSCN(void) |
| { |
| uint8_t x; |
| BTM_TRACE_DEBUG ("BTM_AllocateSCN"); |
| |
| // stack reserves scn 1 for HFP, HSP we still do the correct way |
| for (x = 1; x < BTM_MAX_SCN; x++) |
| { |
| if (!btm_cb.btm_scn[x]) |
| { |
| btm_cb.btm_scn[x] = true; |
| return(x+1); |
| } |
| } |
| |
| return(0); /* No free ports */ |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_TryAllocateSCN |
| ** |
| ** Description Try to allocate a fixed server channel |
| ** |
| ** Returns Returns true if server channel was available |
| ** |
| *******************************************************************************/ |
| |
| bool BTM_TryAllocateSCN(uint8_t scn) |
| { |
| /* Make sure we don't exceed max port range. |
| * Stack reserves scn 1 for HFP, HSP we still do the correct way. |
| */ |
| if ( (scn>=BTM_MAX_SCN) || (scn == 1) ) |
| return false; |
| |
| /* check if this port is available */ |
| if (!btm_cb.btm_scn[scn-1]) |
| { |
| btm_cb.btm_scn[scn-1] = true; |
| return true; |
| } |
| |
| return (false); /* Port was busy */ |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_FreeSCN |
| ** |
| ** Description Free the specified SCN. |
| ** |
| ** Returns true or false |
| ** |
| *******************************************************************************/ |
| bool BTM_FreeSCN(uint8_t scn) |
| { |
| BTM_TRACE_DEBUG ("BTM_FreeSCN "); |
| if (scn <= BTM_MAX_SCN) |
| { |
| btm_cb.btm_scn[scn-1] = false; |
| return(true); |
| } |
| else |
| return(false); /* Illegal SCN passed in */ |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_set_packet_types |
| ** |
| ** Description This function sets the packet types used for a specific |
| ** ACL connection. It is called internally by btm_acl_created |
| ** or by an application/profile by BTM_SetPacketTypes. |
| ** |
| ** Returns status of the operation |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_set_packet_types (tACL_CONN *p, uint16_t pkt_types) |
| { |
| uint16_t temp_pkt_types; |
| BTM_TRACE_DEBUG ("btm_set_packet_types"); |
| /* Save in the ACL control blocks, types that we support */ |
| temp_pkt_types = (pkt_types & BTM_ACL_SUPPORTED_PKTS_MASK & |
| btm_cb.btm_acl_pkt_types_supported); |
| |
| /* OR in any exception packet types if at least 2.0 version of spec */ |
| temp_pkt_types |= ((pkt_types & BTM_ACL_EXCEPTION_PKTS_MASK) | |
| (btm_cb.btm_acl_pkt_types_supported & BTM_ACL_EXCEPTION_PKTS_MASK)); |
| |
| /* Exclude packet types not supported by the peer */ |
| btm_acl_chk_peer_pkt_type_support (p, &temp_pkt_types); |
| |
| BTM_TRACE_DEBUG ("SetPacketType Mask -> 0x%04x", temp_pkt_types); |
| |
| btsnd_hcic_change_conn_type (p->hci_handle, temp_pkt_types); |
| p->pkt_types_mask = temp_pkt_types; |
| |
| return(BTM_CMD_STARTED); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_get_max_packet_size |
| ** |
| ** Returns Returns maximum packet size that can be used for current |
| ** connection, 0 if connection is not established |
| ** |
| *******************************************************************************/ |
| uint16_t btm_get_max_packet_size (BD_ADDR addr) |
| { |
| tACL_CONN *p = btm_bda_to_acl(addr, BT_TRANSPORT_BR_EDR); |
| uint16_t pkt_types = 0; |
| uint16_t pkt_size = 0; |
| BTM_TRACE_DEBUG ("btm_get_max_packet_size"); |
| if (p != NULL) |
| { |
| pkt_types = p->pkt_types_mask; |
| } |
| else |
| { |
| /* Special case for when info for the local device is requested */ |
| if (memcmp (controller_get_interface()->get_address(), addr, BD_ADDR_LEN) == 0) |
| { |
| pkt_types = btm_cb.btm_acl_pkt_types_supported; |
| } |
| } |
| |
| if (pkt_types) |
| { |
| if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_3_DH5)) |
| pkt_size = HCI_EDR3_DH5_PACKET_SIZE; |
| else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_2_DH5)) |
| pkt_size = HCI_EDR2_DH5_PACKET_SIZE; |
| else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_3_DH3)) |
| pkt_size = HCI_EDR3_DH3_PACKET_SIZE; |
| else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DH5) |
| pkt_size = HCI_DH5_PACKET_SIZE; |
| else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_2_DH3)) |
| pkt_size = HCI_EDR2_DH3_PACKET_SIZE; |
| else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DM5) |
| pkt_size = HCI_DM5_PACKET_SIZE; |
| else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DH3) |
| pkt_size = HCI_DH3_PACKET_SIZE; |
| else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DM3) |
| pkt_size = HCI_DM3_PACKET_SIZE; |
| else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_3_DH1)) |
| pkt_size = HCI_EDR3_DH1_PACKET_SIZE; |
| else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_2_DH1)) |
| pkt_size = HCI_EDR2_DH1_PACKET_SIZE; |
| else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DH1) |
| pkt_size = HCI_DH1_PACKET_SIZE; |
| else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DM1) |
| pkt_size = HCI_DM1_PACKET_SIZE; |
| } |
| |
| return(pkt_size); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadRemoteVersion |
| ** |
| ** Returns If connected report peer device info |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_ReadRemoteVersion (BD_ADDR addr, uint8_t *lmp_version, |
| uint16_t *manufacturer, uint16_t *lmp_sub_version) |
| { |
| tACL_CONN *p = btm_bda_to_acl(addr, BT_TRANSPORT_BR_EDR); |
| BTM_TRACE_DEBUG ("BTM_ReadRemoteVersion"); |
| if (p == NULL) |
| return(BTM_UNKNOWN_ADDR); |
| |
| if (lmp_version) |
| *lmp_version = p->lmp_version; |
| |
| if (manufacturer) |
| *manufacturer = p->manufacturer; |
| |
| if (lmp_sub_version) |
| *lmp_sub_version = p->lmp_subversion; |
| |
| return(BTM_SUCCESS); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadRemoteFeatures |
| ** |
| ** Returns pointer to the remote supported features mask (8 bytes) |
| ** |
| *******************************************************************************/ |
| uint8_t *BTM_ReadRemoteFeatures (BD_ADDR addr) |
| { |
| tACL_CONN *p = btm_bda_to_acl(addr, BT_TRANSPORT_BR_EDR); |
| BTM_TRACE_DEBUG ("BTM_ReadRemoteFeatures"); |
| if (p == NULL) |
| { |
| return(NULL); |
| } |
| |
| return(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0]); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadRemoteExtendedFeatures |
| ** |
| ** Returns pointer to the remote extended features mask (8 bytes) |
| ** or NULL if bad page |
| ** |
| *******************************************************************************/ |
| uint8_t *BTM_ReadRemoteExtendedFeatures (BD_ADDR addr, uint8_t page_number) |
| { |
| tACL_CONN *p = btm_bda_to_acl(addr, BT_TRANSPORT_BR_EDR); |
| BTM_TRACE_DEBUG ("BTM_ReadRemoteExtendedFeatures"); |
| if (p == NULL) |
| { |
| return(NULL); |
| } |
| |
| if (page_number > HCI_EXT_FEATURES_PAGE_MAX) |
| { |
| BTM_TRACE_ERROR("Warning: BTM_ReadRemoteExtendedFeatures page %d unknown", page_number); |
| return NULL; |
| } |
| |
| return(p->peer_lmp_features[page_number]); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadNumberRemoteFeaturesPages |
| ** |
| ** Returns number of features pages read from the remote device. |
| ** |
| *******************************************************************************/ |
| uint8_t BTM_ReadNumberRemoteFeaturesPages (BD_ADDR addr) |
| { |
| tACL_CONN *p = btm_bda_to_acl(addr, BT_TRANSPORT_BR_EDR); |
| BTM_TRACE_DEBUG ("BTM_ReadNumberRemoteFeaturesPages"); |
| if (p == NULL) |
| { |
| return(0); |
| } |
| |
| return(p->num_read_pages); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadAllRemoteFeatures |
| ** |
| ** Returns pointer to all features of the remote (24 bytes). |
| ** |
| *******************************************************************************/ |
| uint8_t *BTM_ReadAllRemoteFeatures (BD_ADDR addr) |
| { |
| tACL_CONN *p = btm_bda_to_acl(addr, BT_TRANSPORT_BR_EDR); |
| BTM_TRACE_DEBUG ("BTM_ReadAllRemoteFeatures"); |
| if (p == NULL) |
| { |
| return(NULL); |
| } |
| |
| return(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0]); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_RegBusyLevelNotif |
| ** |
| ** Description This function is called to register a callback to receive |
| ** busy level change events. |
| ** |
| ** Returns BTM_SUCCESS if successfully registered, otherwise error |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_RegBusyLevelNotif (tBTM_BL_CHANGE_CB *p_cb, uint8_t *p_level, |
| tBTM_BL_EVENT_MASK evt_mask) |
| { |
| BTM_TRACE_DEBUG ("BTM_RegBusyLevelNotif"); |
| if (p_level) |
| *p_level = btm_cb.busy_level; |
| |
| btm_cb.bl_evt_mask = evt_mask; |
| |
| if (!p_cb) |
| btm_cb.p_bl_changed_cb = NULL; |
| else if (btm_cb.p_bl_changed_cb) |
| return(BTM_BUSY); |
| else |
| btm_cb.p_bl_changed_cb = p_cb; |
| |
| return(BTM_SUCCESS); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SetQoS |
| ** |
| ** Description This function is called to setup QoS |
| ** |
| ** Returns status of the operation |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_SetQoS (BD_ADDR bd, FLOW_SPEC *p_flow, tBTM_CMPL_CB *p_cb) |
| { |
| tACL_CONN *p = &btm_cb.acl_db[0]; |
| |
| BTM_TRACE_API ("BTM_SetQoS: BdAddr: %02x%02x%02x%02x%02x%02x", |
| bd[0], bd[1], bd[2], |
| bd[3], bd[4], bd[5]); |
| |
| /* If someone already waiting on the version, do not allow another */ |
| if (btm_cb.devcb.p_qos_setup_cmpl_cb) |
| return(BTM_BUSY); |
| |
| if ( (p = btm_bda_to_acl(bd, BT_TRANSPORT_BR_EDR)) != NULL) |
| { |
| btm_cb.devcb.p_qos_setup_cmpl_cb = p_cb; |
| alarm_set_on_queue(btm_cb.devcb.qos_setup_timer, |
| BTM_DEV_REPLY_TIMEOUT_MS, |
| btm_qos_setup_timeout, NULL, |
| btu_general_alarm_queue); |
| |
| btsnd_hcic_qos_setup(p->hci_handle, p_flow->qos_flags, p_flow->service_type, |
| p_flow->token_rate, p_flow->peak_bandwidth, |
| p_flow->latency,p_flow->delay_variation); |
| return(BTM_CMD_STARTED); |
| } |
| |
| /* If here, no BD Addr found */ |
| return(BTM_UNKNOWN_ADDR); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_qos_setup_timeout |
| ** |
| ** Description Callback when QoS setup times out. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_qos_setup_timeout(UNUSED_ATTR void *data) |
| { |
| tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_qos_setup_cmpl_cb; |
| btm_cb.devcb.p_qos_setup_cmpl_cb = NULL; |
| if (p_cb) |
| (*p_cb)((void *) NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_qos_setup_complete |
| ** |
| ** Description This function is called when the command complete message |
| ** is received from the HCI for the qos setup request. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_qos_setup_complete(uint8_t status, uint16_t handle, FLOW_SPEC *p_flow) |
| { |
| tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_qos_setup_cmpl_cb; |
| tBTM_QOS_SETUP_CMPL qossu; |
| |
| BTM_TRACE_DEBUG("%s", __func__); |
| alarm_cancel(btm_cb.devcb.qos_setup_timer); |
| btm_cb.devcb.p_qos_setup_cmpl_cb = NULL; |
| |
| /* If there was a registered callback, call it */ |
| if (p_cb) |
| { |
| memset(&qossu, 0, sizeof(tBTM_QOS_SETUP_CMPL)); |
| qossu.status = status; |
| qossu.handle = handle; |
| if (p_flow != NULL) |
| { |
| qossu.flow.qos_flags = p_flow->qos_flags; |
| qossu.flow.service_type = p_flow->service_type; |
| qossu.flow.token_rate = p_flow->token_rate; |
| qossu.flow.peak_bandwidth = p_flow->peak_bandwidth; |
| qossu.flow.latency = p_flow->latency; |
| qossu.flow.delay_variation = p_flow->delay_variation; |
| } |
| BTM_TRACE_DEBUG ("BTM: p_flow->delay_variation: 0x%02x", |
| qossu.flow.delay_variation); |
| (*p_cb)(&qossu); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadRSSI |
| ** |
| ** Description This function is called to read the link policy settings. |
| ** The address of link policy results are returned in the callback. |
| ** (tBTM_RSSI_RESULTS) |
| ** |
| ** Returns BTM_CMD_STARTED if successfully initiated or error code |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_ReadRSSI (const BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb) |
| { |
| tACL_CONN *p; |
| tBT_TRANSPORT transport = BT_TRANSPORT_BR_EDR; |
| #if (BLE_INCLUDED == TRUE) |
| tBT_DEVICE_TYPE dev_type; |
| tBLE_ADDR_TYPE addr_type; |
| #endif |
| BTM_TRACE_API ("BTM_ReadRSSI: RemBdAddr: %02x%02x%02x%02x%02x%02x", |
| remote_bda[0], remote_bda[1], remote_bda[2], |
| remote_bda[3], remote_bda[4], remote_bda[5]); |
| |
| /* If someone already waiting on the version, do not allow another */ |
| if (btm_cb.devcb.p_rssi_cmpl_cb) |
| return(BTM_BUSY); |
| |
| #if (BLE_INCLUDED == TRUE) |
| BTM_ReadDevInfo(remote_bda, &dev_type, &addr_type); |
| if (dev_type == BT_DEVICE_TYPE_BLE) |
| transport = BT_TRANSPORT_LE; |
| #endif |
| |
| p = btm_bda_to_acl(remote_bda, transport); |
| if (p != (tACL_CONN *)NULL) |
| { |
| btm_cb.devcb.p_rssi_cmpl_cb = p_cb; |
| alarm_set_on_queue(btm_cb.devcb.read_rssi_timer, |
| BTM_DEV_REPLY_TIMEOUT_MS, btm_read_rssi_timeout, |
| NULL, btu_general_alarm_queue); |
| |
| btsnd_hcic_read_rssi (p->hci_handle); |
| return(BTM_CMD_STARTED); |
| } |
| |
| /* If here, no BD Addr found */ |
| return(BTM_UNKNOWN_ADDR); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadLinkQuality |
| ** |
| ** Description This function is called to read the link qulaity. |
| ** The value of the link quality is returned in the callback. |
| ** (tBTM_LINK_QUALITY_RESULTS) |
| ** |
| ** Returns BTM_CMD_STARTED if successfully initiated or error code |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_ReadLinkQuality (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb) |
| { |
| tACL_CONN *p; |
| |
| BTM_TRACE_API ("BTM_ReadLinkQuality: RemBdAddr: %02x%02x%02x%02x%02x%02x", |
| remote_bda[0], remote_bda[1], remote_bda[2], |
| remote_bda[3], remote_bda[4], remote_bda[5]); |
| |
| /* If someone already waiting on the version, do not allow another */ |
| if (btm_cb.devcb.p_link_qual_cmpl_cb) |
| return(BTM_BUSY); |
| |
| p = btm_bda_to_acl(remote_bda, BT_TRANSPORT_BR_EDR); |
| if (p != (tACL_CONN *)NULL) |
| { |
| btm_cb.devcb.p_link_qual_cmpl_cb = p_cb; |
| alarm_set_on_queue(btm_cb.devcb.read_link_quality_timer, |
| BTM_DEV_REPLY_TIMEOUT_MS, |
| btm_read_link_quality_timeout, NULL, |
| btu_general_alarm_queue); |
| |
| btsnd_hcic_get_link_quality(p->hci_handle); |
| return(BTM_CMD_STARTED); |
| } |
| |
| /* If here, no BD Addr found */ |
| return(BTM_UNKNOWN_ADDR); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadTxPower |
| ** |
| ** Description This function is called to read the current |
| ** TX power of the connection. The tx power level results |
| ** are returned in the callback. |
| ** (tBTM_RSSI_RESULTS) |
| ** |
| ** Returns BTM_CMD_STARTED if successfully initiated or error code |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_ReadTxPower (BD_ADDR remote_bda, tBT_TRANSPORT transport, tBTM_CMPL_CB *p_cb) |
| { |
| tACL_CONN *p; |
| #define BTM_READ_RSSI_TYPE_CUR 0x00 |
| #define BTM_READ_RSSI_TYPE_MAX 0X01 |
| |
| BTM_TRACE_API ("BTM_ReadTxPower: RemBdAddr: %02x%02x%02x%02x%02x%02x", |
| remote_bda[0], remote_bda[1], remote_bda[2], |
| remote_bda[3], remote_bda[4], remote_bda[5]); |
| |
| /* If someone already waiting on the version, do not allow another */ |
| if (btm_cb.devcb.p_tx_power_cmpl_cb) |
| return(BTM_BUSY); |
| |
| p = btm_bda_to_acl(remote_bda, transport); |
| if (p != (tACL_CONN *)NULL) |
| { |
| btm_cb.devcb.p_tx_power_cmpl_cb = p_cb; |
| alarm_set_on_queue(btm_cb.devcb.read_tx_power_timer, |
| BTM_DEV_REPLY_TIMEOUT_MS, |
| btm_read_tx_power_timeout, NULL, |
| btu_general_alarm_queue); |
| |
| #if (BLE_INCLUDED == TRUE) |
| if (p->transport == BT_TRANSPORT_LE) |
| { |
| memcpy(btm_cb.devcb.read_tx_pwr_addr, remote_bda, BD_ADDR_LEN); |
| btsnd_hcic_ble_read_adv_chnl_tx_power(); |
| } |
| else |
| #endif |
| { |
| btsnd_hcic_read_tx_power(p->hci_handle, BTM_READ_RSSI_TYPE_CUR); |
| } |
| |
| return(BTM_CMD_STARTED); |
| } |
| |
| /* If here, no BD Addr found */ |
| return (BTM_UNKNOWN_ADDR); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_tx_power_timeout |
| ** |
| ** Description Callback when reading the tx power times out. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_tx_power_timeout(UNUSED_ATTR void *data) |
| { |
| tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_tx_power_cmpl_cb; |
| btm_cb.devcb.p_tx_power_cmpl_cb = NULL; |
| if (p_cb) |
| (*p_cb)((void *) NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_tx_power_complete |
| ** |
| ** Description This function is called when the command complete message |
| ** is received from the HCI for the read tx power request. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_tx_power_complete(uint8_t *p, bool is_ble) |
| { |
| tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_tx_power_cmpl_cb; |
| tBTM_TX_POWER_RESULTS results; |
| uint16_t handle; |
| tACL_CONN *p_acl_cb = &btm_cb.acl_db[0]; |
| uint16_t index; |
| |
| BTM_TRACE_DEBUG("%s", __func__); |
| alarm_cancel(btm_cb.devcb.read_tx_power_timer); |
| btm_cb.devcb.p_tx_power_cmpl_cb = NULL; |
| |
| /* If there was a registered callback, call it */ |
| if (p_cb) |
| { |
| STREAM_TO_UINT8 (results.hci_status, p); |
| |
| if (results.hci_status == HCI_SUCCESS) |
| { |
| results.status = BTM_SUCCESS; |
| |
| if (!is_ble) |
| { |
| STREAM_TO_UINT16 (handle, p); |
| STREAM_TO_UINT8 (results.tx_power, p); |
| |
| /* Search through the list of active channels for the correct BD Addr */ |
| for (index = 0; index < MAX_L2CAP_LINKS; index++, p_acl_cb++) |
| { |
| if ((p_acl_cb->in_use) && (handle == p_acl_cb->hci_handle)) |
| { |
| memcpy (results.rem_bda, p_acl_cb->remote_addr, BD_ADDR_LEN); |
| break; |
| } |
| } |
| } |
| #if (BLE_INCLUDED == TRUE) |
| else |
| { |
| STREAM_TO_UINT8 (results.tx_power, p); |
| memcpy(results.rem_bda, btm_cb.devcb.read_tx_pwr_addr, BD_ADDR_LEN); |
| } |
| #endif |
| BTM_TRACE_DEBUG ("BTM TX power Complete: tx_power %d, hci status 0x%02x", |
| results.tx_power, results.hci_status); |
| } |
| else |
| results.status = BTM_ERR_PROCESSING; |
| |
| (*p_cb)(&results); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_rssi_timeout |
| ** |
| ** Description Callback when reading the RSSI times out. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_rssi_timeout(UNUSED_ATTR void *data) |
| { |
| tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_rssi_cmpl_cb; |
| btm_cb.devcb.p_rssi_cmpl_cb = NULL; |
| if (p_cb) |
| (*p_cb)((void *) NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_rssi_complete |
| ** |
| ** Description This function is called when the command complete message |
| ** is received from the HCI for the read rssi request. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_rssi_complete (uint8_t *p) |
| { |
| tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_rssi_cmpl_cb; |
| tBTM_RSSI_RESULTS results; |
| uint16_t handle; |
| tACL_CONN *p_acl_cb = &btm_cb.acl_db[0]; |
| uint16_t index; |
| |
| BTM_TRACE_DEBUG("%s", __func__); |
| alarm_cancel(btm_cb.devcb.read_rssi_timer); |
| btm_cb.devcb.p_rssi_cmpl_cb = NULL; |
| |
| /* If there was a registered callback, call it */ |
| if (p_cb) |
| { |
| STREAM_TO_UINT8 (results.hci_status, p); |
| |
| if (results.hci_status == HCI_SUCCESS) |
| { |
| results.status = BTM_SUCCESS; |
| |
| STREAM_TO_UINT16 (handle, p); |
| |
| STREAM_TO_UINT8 (results.rssi, p); |
| BTM_TRACE_DEBUG ("BTM RSSI Complete: rssi %d, hci status 0x%02x", |
| results.rssi, results.hci_status); |
| |
| /* Search through the list of active channels for the correct BD Addr */ |
| for (index = 0; index < MAX_L2CAP_LINKS; index++, p_acl_cb++) |
| { |
| if ((p_acl_cb->in_use) && (handle == p_acl_cb->hci_handle)) |
| { |
| memcpy (results.rem_bda, p_acl_cb->remote_addr, BD_ADDR_LEN); |
| break; |
| } |
| } |
| } |
| else |
| results.status = BTM_ERR_PROCESSING; |
| |
| (*p_cb)(&results); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_link_quality_timeout |
| ** |
| ** Description Callback when reading the link quality times out. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_link_quality_timeout(UNUSED_ATTR void *data) |
| { |
| tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_link_qual_cmpl_cb; |
| btm_cb.devcb.p_link_qual_cmpl_cb = NULL; |
| if (p_cb) |
| (*p_cb)((void *) NULL); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_read_link_quality_complete |
| ** |
| ** Description This function is called when the command complete message |
| ** is received from the HCI for the read link quality. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_read_link_quality_complete(uint8_t *p) |
| { |
| tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_link_qual_cmpl_cb; |
| tBTM_LINK_QUALITY_RESULTS results; |
| uint16_t handle; |
| tACL_CONN *p_acl_cb = &btm_cb.acl_db[0]; |
| uint16_t index; |
| |
| BTM_TRACE_DEBUG("%s", __func__); |
| alarm_cancel(btm_cb.devcb.read_link_quality_timer); |
| btm_cb.devcb.p_link_qual_cmpl_cb = NULL; |
| |
| /* If there was a registered callback, call it */ |
| if (p_cb) |
| { |
| STREAM_TO_UINT8 (results.hci_status, p); |
| |
| if (results.hci_status == HCI_SUCCESS) |
| { |
| results.status = BTM_SUCCESS; |
| |
| STREAM_TO_UINT16 (handle, p); |
| |
| STREAM_TO_UINT8 (results.link_quality, p); |
| BTM_TRACE_DEBUG ("BTM Link Quality Complete: Link Quality %d, hci status 0x%02x", |
| results.link_quality, results.hci_status); |
| |
| /* Search through the list of active channels for the correct BD Addr */ |
| for (index = 0; index < MAX_L2CAP_LINKS; index++, p_acl_cb++) |
| { |
| if ((p_acl_cb->in_use) && (handle == p_acl_cb->hci_handle)) |
| { |
| memcpy (results.rem_bda, p_acl_cb->remote_addr, BD_ADDR_LEN); |
| break; |
| } |
| } |
| } |
| else |
| results.status = BTM_ERR_PROCESSING; |
| |
| (*p_cb)(&results); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_remove_acl |
| ** |
| ** Description This function is called to disconnect an ACL connection |
| ** |
| ** Returns BTM_SUCCESS if successfully initiated, otherwise BTM_NO_RESOURCES. |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_remove_acl (BD_ADDR bd_addr, tBT_TRANSPORT transport) |
| { |
| uint16_t hci_handle = BTM_GetHCIConnHandle(bd_addr, transport); |
| tBTM_STATUS status = BTM_SUCCESS; |
| |
| BTM_TRACE_DEBUG ("btm_remove_acl"); |
| #if (BTM_DISC_DURING_RS == TRUE) |
| tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr); |
| |
| /* Role Switch is pending, postpone until completed */ |
| if (p_dev_rec && (p_dev_rec->rs_disc_pending == BTM_SEC_RS_PENDING)) |
| { |
| p_dev_rec->rs_disc_pending = BTM_SEC_DISC_PENDING; |
| } |
| else /* otherwise can disconnect right away */ |
| #endif |
| { |
| if (hci_handle != 0xFFFF && p_dev_rec && |
| p_dev_rec->sec_state!= BTM_SEC_STATE_DISCONNECTING) |
| { |
| btsnd_hcic_disconnect(hci_handle, HCI_ERR_PEER_USER); |
| } |
| else |
| status = BTM_UNKNOWN_ADDR; |
| } |
| |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SetTraceLevel |
| ** |
| ** Description This function sets the trace level for BTM. If called with |
| ** a value of 0xFF, it simply returns the current trace level. |
| ** |
| ** Returns The new or current trace level |
| ** |
| *******************************************************************************/ |
| uint8_t BTM_SetTraceLevel (uint8_t new_level) |
| { |
| BTM_TRACE_DEBUG ("BTM_SetTraceLevel"); |
| if (new_level != 0xFF) |
| btm_cb.trace_level = new_level; |
| |
| return(btm_cb.trace_level); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_cont_rswitch |
| ** |
| ** Description This function is called to continue processing an active |
| ** role switch. It first disables encryption if enabled and |
| ** EPR is not supported |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_cont_rswitch (tACL_CONN *p, tBTM_SEC_DEV_REC *p_dev_rec, |
| uint8_t hci_status) |
| { |
| BTM_TRACE_DEBUG ("btm_cont_rswitch"); |
| /* Check to see if encryption needs to be turned off if pending |
| change of link key or role switch */ |
| if (p->switch_role_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE) |
| { |
| /* Must turn off Encryption first if necessary */ |
| /* Some devices do not support switch or change of link key while encryption is on */ |
| if (p_dev_rec != NULL && ((p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED) != 0) |
| && !BTM_EPR_AVAILABLE(p)) |
| { |
| btsnd_hcic_set_conn_encrypt(p->hci_handle, false); |
| p->encrypt_state = BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF; |
| if (p->switch_role_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE) |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF; |
| } |
| else /* Encryption not used or EPR supported, continue with switch |
| and/or change of link key */ |
| { |
| if (p->switch_role_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE) |
| { |
| p->switch_role_state = BTM_ACL_SWKEY_STATE_IN_PROGRESS; |
| #if (BTM_DISC_DURING_RS == TRUE) |
| if (p_dev_rec) |
| p_dev_rec->rs_disc_pending = BTM_SEC_RS_PENDING; |
| #endif |
| btsnd_hcic_switch_role(p->remote_addr, (uint8_t)!p->link_role); |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_resubmit_page |
| ** |
| ** Description send pending page request |
| ** |
| *******************************************************************************/ |
| void btm_acl_resubmit_page (void) |
| { |
| tBTM_SEC_DEV_REC *p_dev_rec; |
| BT_HDR *p_buf; |
| uint8_t *pp; |
| BD_ADDR bda; |
| BTM_TRACE_DEBUG ("btm_acl_resubmit_page"); |
| /* If there were other page request schedule can start the next one */ |
| if ((p_buf = (BT_HDR *)fixed_queue_try_dequeue(btm_cb.page_queue)) != NULL) |
| { |
| /* skip 3 (2 bytes opcode and 1 byte len) to get to the bd_addr |
| * for both create_conn and rmt_name */ |
| pp = (uint8_t *)(p_buf + 1) + p_buf->offset + 3; |
| |
| STREAM_TO_BDADDR (bda, pp); |
| |
| p_dev_rec = btm_find_or_alloc_dev (bda); |
| |
| memcpy (btm_cb.connecting_bda, p_dev_rec->bd_addr, BD_ADDR_LEN); |
| memcpy (btm_cb.connecting_dc, p_dev_rec->dev_class, DEV_CLASS_LEN); |
| |
| btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p_buf); |
| } |
| else |
| btm_cb.paging = false; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_reset_paging |
| ** |
| ** Description set paging to false and free the page queue - called at hci_reset |
| ** |
| *******************************************************************************/ |
| void btm_acl_reset_paging (void) |
| { |
| BT_HDR *p; |
| BTM_TRACE_DEBUG ("btm_acl_reset_paging"); |
| /* If we sent reset we are definitely not paging any more */ |
| while ((p = (BT_HDR *)fixed_queue_try_dequeue(btm_cb.page_queue)) != NULL) |
| osi_free(p); |
| |
| btm_cb.paging = false; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_paging |
| ** |
| ** Description send a paging command or queue it in btm_cb |
| ** |
| *******************************************************************************/ |
| void btm_acl_paging (BT_HDR *p, BD_ADDR bda) |
| { |
| tBTM_SEC_DEV_REC *p_dev_rec; |
| |
| BTM_TRACE_DEBUG ("btm_acl_paging discing:%d, paging:%d BDA: %06x%06x", |
| btm_cb.discing, btm_cb.paging, |
| (bda[0]<<16) + (bda[1]<<8) + bda[2], (bda[3]<<16) + (bda[4] << 8) + bda[5]); |
| if (btm_cb.discing) |
| { |
| btm_cb.paging = true; |
| fixed_queue_enqueue(btm_cb.page_queue, p); |
| } |
| else |
| { |
| if (!BTM_ACL_IS_CONNECTED (bda)) |
| { |
| BTM_TRACE_DEBUG ("connecting_bda: %06x%06x", |
| (btm_cb.connecting_bda[0]<<16) + (btm_cb.connecting_bda[1]<<8) + |
| btm_cb.connecting_bda[2], |
| (btm_cb.connecting_bda[3]<<16) + (btm_cb.connecting_bda[4] << 8) + |
| btm_cb.connecting_bda[5]); |
| if (btm_cb.paging && |
| memcmp (bda, btm_cb.connecting_bda, BD_ADDR_LEN) != 0) |
| { |
| fixed_queue_enqueue(btm_cb.page_queue, p); |
| } |
| else |
| { |
| p_dev_rec = btm_find_or_alloc_dev (bda); |
| memcpy (btm_cb.connecting_bda, p_dev_rec->bd_addr, BD_ADDR_LEN); |
| memcpy (btm_cb.connecting_dc, p_dev_rec->dev_class, DEV_CLASS_LEN); |
| |
| btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p); |
| } |
| |
| btm_cb.paging = true; |
| } |
| else /* ACL is already up */ |
| { |
| btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_notif_conn_collision |
| ** |
| ** Description Send connection collision event to upper layer if registered |
| ** |
| ** Returns true if sent out to upper layer, |
| ** false if no one needs the notification. |
| ** |
| *******************************************************************************/ |
| bool btm_acl_notif_conn_collision (BD_ADDR bda) |
| { |
| tBTM_BL_EVENT_DATA evt_data; |
| |
| /* Report possible collision to the upper layer. */ |
| if (btm_cb.p_bl_changed_cb) |
| { |
| BTM_TRACE_DEBUG ("btm_acl_notif_conn_collision: RemBdAddr: %02x%02x%02x%02x%02x%02x", |
| bda[0], bda[1], bda[2], bda[3], bda[4], bda[5]); |
| |
| evt_data.event = BTM_BL_COLLISION_EVT; |
| evt_data.conn.p_bda = bda; |
| |
| #if (BLE_INCLUDED == TRUE) |
| evt_data.conn.transport = BT_TRANSPORT_BR_EDR; |
| evt_data.conn.handle = BTM_INVALID_HCI_HANDLE; |
| #endif |
| (*btm_cb.p_bl_changed_cb)(&evt_data); |
| return true; |
| } |
| else |
| return false; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_acl_chk_peer_pkt_type_support |
| ** |
| ** Description Check if peer supports requested packets |
| ** |
| *******************************************************************************/ |
| void btm_acl_chk_peer_pkt_type_support (tACL_CONN *p, uint16_t *p_pkt_type) |
| { |
| /* 3 and 5 slot packets? */ |
| if (!HCI_3_SLOT_PACKETS_SUPPORTED(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0])) |
| *p_pkt_type &= ~(BTM_ACL_PKT_TYPES_MASK_DH3 +BTM_ACL_PKT_TYPES_MASK_DM3); |
| |
| if (!HCI_5_SLOT_PACKETS_SUPPORTED(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0])) |
| *p_pkt_type &= ~(BTM_ACL_PKT_TYPES_MASK_DH5 + BTM_ACL_PKT_TYPES_MASK_DM5); |
| |
| /* 2 and 3 MPS support? */ |
| if (!HCI_EDR_ACL_2MPS_SUPPORTED(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0])) |
| /* Not supported. Add 'not_supported' mask for all 2MPS packet types */ |
| *p_pkt_type |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH1 + BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 + |
| BTM_ACL_PKT_TYPES_MASK_NO_2_DH5); |
| |
| if (!HCI_EDR_ACL_3MPS_SUPPORTED(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0])) |
| /* Not supported. Add 'not_supported' mask for all 3MPS packet types */ |
| *p_pkt_type |= (BTM_ACL_PKT_TYPES_MASK_NO_3_DH1 + BTM_ACL_PKT_TYPES_MASK_NO_3_DH3 + |
| BTM_ACL_PKT_TYPES_MASK_NO_3_DH5); |
| |
| /* EDR 3 and 5 slot support? */ |
| if (HCI_EDR_ACL_2MPS_SUPPORTED(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0]) |
| || HCI_EDR_ACL_3MPS_SUPPORTED(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0])) |
| { |
| if (!HCI_3_SLOT_EDR_ACL_SUPPORTED(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0])) |
| /* Not supported. Add 'not_supported' mask for all 3-slot EDR packet types */ |
| *p_pkt_type |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 + BTM_ACL_PKT_TYPES_MASK_NO_3_DH3); |
| |
| if (!HCI_5_SLOT_EDR_ACL_SUPPORTED(p->peer_lmp_features[HCI_EXT_FEATURES_PAGE_0])) |
| /* Not supported. Add 'not_supported' mask for all 5-slot EDR packet types */ |
| *p_pkt_type |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH5 + BTM_ACL_PKT_TYPES_MASK_NO_3_DH5); |
| } |
| } |