| /****************************************************************************** |
| * |
| * Copyright (C) 2004-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains functions for managing the SCO connection used in AG. |
| * |
| ******************************************************************************/ |
| |
| #include <stddef.h> |
| #include "bta_api.h" |
| #include "bta_ag_api.h" |
| #include "bta_ag_co.h" |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| #include "bta_dm_co.h" |
| #endif |
| #include "bta_ag_int.h" |
| #include "btm_api.h" |
| #include "bt_common.h" |
| #include "utl.h" |
| #include "device/include/interop.h" |
| //#include "osi/include/log.h" |
| |
| #ifndef BTA_AG_SCO_DEBUG |
| #define BTA_AG_SCO_DEBUG FALSE |
| #endif |
| |
| /* Codec negotiation timeout */ |
| #ifndef BTA_AG_CODEC_NEGOTIATION_TIMEOUT_MS |
| #define BTA_AG_CODEC_NEGOTIATION_TIMEOUT_MS (5 * 1000) /* 5 seconds */ |
| #endif |
| |
| extern fixed_queue_t *btu_bta_alarm_queue; |
| extern void bta_dm_pm_set_sniff_policy_toggle(BD_ADDR peer_addr, BOOLEAN bDisable); |
| |
| #if BTA_AG_SCO_DEBUG == TRUE |
| static char *bta_ag_sco_evt_str(UINT8 event); |
| static char *bta_ag_sco_state_str(UINT8 state); |
| #endif |
| |
| #define BTA_AG_NO_EDR_ESCO (BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 | \ |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | \ |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | \ |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5) |
| |
| /* sco events */ |
| enum |
| { |
| BTA_AG_SCO_LISTEN_E, /* listen request */ |
| BTA_AG_SCO_OPEN_E, /* open request */ |
| BTA_AG_SCO_XFER_E, /* transfer request */ |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| BTA_AG_SCO_CN_DONE_E, /* codec negotiation done */ |
| BTA_AG_SCO_REOPEN_E, /* Retry with other codec when failed */ |
| #endif |
| BTA_AG_SCO_CLOSE_E, /* close request */ |
| BTA_AG_SCO_SHUTDOWN_E, /* shutdown request */ |
| BTA_AG_SCO_CONN_OPEN_E, /* sco open */ |
| BTA_AG_SCO_CONN_CLOSE_E, /* sco closed */ |
| BTA_AG_SCO_CI_DATA_E /* SCO data ready */ |
| }; |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| #define BTA_AG_NUM_CODECS 4 |
| #define BTA_AG_ESCO_SETTING_IDX_CVSD_S4 0 /* eSCO S4 setting for CVSD */ |
| #define BTA_AG_ESCO_SETTING_IDX_CVSD_S3 1 /* eSCO S3 setting for CVSD */ |
| #define BTA_AG_ESCO_SETTING_IDX_T1 2 /* eSCO setting for mSBC T1 */ |
| #define BTA_AG_ESCO_SETTING_IDX_T2 3 /* eSCO setting for mSBC T2 */ |
| |
| static const tBTM_ESCO_PARAMS bta_ag_esco_params[BTA_AG_NUM_CODECS] = |
| { |
| /* CVSD S4 */ |
| { |
| BTM_64KBITS_RATE, /* TX Bandwidth (64 kbits/sec) */ |
| BTM_64KBITS_RATE, /* RX Bandwidth (64 kbits/sec) */ |
| 0x000c, /* 12 ms (HS/HF can use EV3, 2-EV3, 3-EV3) */ |
| BTM_VOICE_SETTING_CVSD, /* Inp Linear, Air CVSD, 2s Comp, 16bit */ |
| (BTM_SCO_PKT_TYPES_MASK_HV1 + /* Packet Types */ |
| BTM_SCO_PKT_TYPES_MASK_HV2 + |
| BTM_SCO_PKT_TYPES_MASK_HV3 + |
| BTM_SCO_PKT_TYPES_MASK_EV3 + |
| BTM_SCO_PKT_TYPES_MASK_EV4 + |
| BTM_SCO_PKT_TYPES_MASK_EV5 + |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 + |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5), |
| BTM_ESCO_RETRANS_QUALITY /* Retransmission effort */ |
| }, |
| /* CVSD S3 */ |
| { |
| BTM_64KBITS_RATE, /* TX Bandwidth (64 kbits/sec) */ |
| BTM_64KBITS_RATE, /* RX Bandwidth (64 kbits/sec) */ |
| 0x000a, /* 10 ms (HS/HF can use EV3, 2-EV3, 3-EV3) */ |
| BTM_VOICE_SETTING_CVSD, /* Inp Linear, Air CVSD, 2s Comp, 16bit */ |
| (BTM_SCO_PKT_TYPES_MASK_HV1 + /* Packet Types */ |
| BTM_SCO_PKT_TYPES_MASK_HV2 + |
| BTM_SCO_PKT_TYPES_MASK_HV3 + |
| BTM_SCO_PKT_TYPES_MASK_EV3 + |
| BTM_SCO_PKT_TYPES_MASK_EV4 + |
| BTM_SCO_PKT_TYPES_MASK_EV5 + |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 + |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5), |
| BTM_ESCO_RETRANS_POWER /* Retransmission effort */ |
| }, |
| /* mSBC T1 */ |
| { |
| BTM_64KBITS_RATE, /* TX Bandwidth (64 kbits/sec), 8000 */ |
| BTM_64KBITS_RATE, /* RX Bandwidth (64 kbits/sec), 8000 */ |
| 8, /* 8 ms */ |
| BTM_VOICE_SETTING_TRANS, /* Inp Linear, Transparent, 2s Comp, 16bit */ |
| (BTM_SCO_PKT_TYPES_MASK_EV3 | /* Packet Types : EV3 + NO_2_EV3 */ |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5 | |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 ), |
| BTM_ESCO_RETRANS_QUALITY /* Retransmission effort */ |
| }, |
| /* mSBC T2*/ |
| { |
| BTM_64KBITS_RATE, /* TX Bandwidth (64 kbits/sec), 8000 */ |
| BTM_64KBITS_RATE, /* RX Bandwidth (64 kbits/sec), 8000 */ |
| 13, /* 13 ms */ |
| BTM_VOICE_SETTING_TRANS, /* Inp Linear, Transparent, 2s Comp, 16bit */ |
| (BTM_SCO_PKT_TYPES_MASK_EV3 | /* Packet Types : EV3 + 2-EV3 */ |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5), |
| BTM_ESCO_RETRANS_QUALITY /* Retransmission effort */ |
| } |
| }; |
| #else |
| /* WBS not included, CVSD by default */ |
| static const tBTM_ESCO_PARAMS bta_ag_esco_params[] = |
| { |
| /* CVSD S4 */ |
| { |
| BTM_64KBITS_RATE, /* TX Bandwidth (64 kbits/sec) */ |
| BTM_64KBITS_RATE, /* RX Bandwidth (64 kbits/sec) */ |
| 0x000c, /* 12 ms (HS/HF can use EV3, 2-EV3, 3-EV3) */ |
| BTM_VOICE_SETTING_CVSD, /* Inp Linear, Air CVSD, 2s Comp, 16bit */ |
| (BTM_SCO_PKT_TYPES_MASK_HV1 + /* Packet Types */ |
| BTM_SCO_PKT_TYPES_MASK_HV2 + |
| BTM_SCO_PKT_TYPES_MASK_HV3 + |
| BTM_SCO_PKT_TYPES_MASK_EV3 + |
| BTM_SCO_PKT_TYPES_MASK_EV4 + |
| BTM_SCO_PKT_TYPES_MASK_EV5 + |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 + |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5), |
| BTM_ESCO_RETRANS_QUALITY /* Retransmission effort */ |
| }, |
| /* CVSD S3 */ |
| { |
| BTM_64KBITS_RATE, /* TX Bandwidth (64 kbits/sec) */ |
| BTM_64KBITS_RATE, /* RX Bandwidth (64 kbits/sec) */ |
| 0x000a, /* 10 ms (HS/HF can use EV3, 2-EV3, 3-EV3) */ |
| 0x0060, /* Inp Linear, Air CVSD, 2s Comp, 16bit */ |
| (BTM_SCO_PKT_TYPES_MASK_HV1 + /* Packet Types */ |
| BTM_SCO_PKT_TYPES_MASK_HV2 + |
| BTM_SCO_PKT_TYPES_MASK_HV3 + |
| BTM_SCO_PKT_TYPES_MASK_EV3 + |
| BTM_SCO_PKT_TYPES_MASK_EV4 + |
| BTM_SCO_PKT_TYPES_MASK_EV5 + |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 + |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5), |
| BTM_ESCO_RETRANS_POWER /* Retransmission effort */ |
| } |
| }; |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_conn_cback |
| ** |
| ** Description BTM SCO connection callback. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_ag_sco_conn_cback(UINT16 sco_idx) |
| { |
| UINT16 handle; |
| tBTA_AG_SCB *p_scb; |
| |
| /* match callback to scb; first check current sco scb */ |
| if (bta_ag_cb.sco.p_curr_scb != NULL && bta_ag_cb.sco.p_curr_scb->in_use) |
| { |
| handle = bta_ag_scb_to_idx(bta_ag_cb.sco.p_curr_scb); |
| } |
| /* then check for scb connected to this peer */ |
| else |
| { |
| /* Check if SLC is up */ |
| handle = bta_ag_idx_by_bdaddr(BTM_ReadScoBdAddr(sco_idx)); |
| p_scb = bta_ag_scb_by_idx(handle); |
| if(p_scb && !p_scb->svc_conn) |
| handle = 0; |
| } |
| |
| if (handle != 0) { |
| BT_HDR *p_buf = (BT_HDR *)osi_malloc(sizeof(BT_HDR)); |
| p_buf->event = BTA_AG_SCO_OPEN_EVT; |
| p_buf->layer_specific = handle; |
| bta_sys_sendmsg(p_buf); |
| } else { |
| /* no match found; disconnect sco, init sco variables */ |
| bta_ag_cb.sco.p_curr_scb = NULL; |
| bta_ag_cb.sco.state = BTA_AG_SCO_SHUTDOWN_ST; |
| BTM_RemoveSco(sco_idx); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_disc_cback |
| ** |
| ** Description BTM SCO disconnection callback. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_ag_sco_disc_cback(UINT16 sco_idx) |
| { |
| UINT16 handle = 0; |
| |
| APPL_TRACE_IMP("bta_ag_sco_disc_cback(): sco_idx: 0x%x p_cur_scb: 0x%08x sco.state: %d", sco_idx, bta_ag_cb.sco.p_curr_scb, bta_ag_cb.sco.state); |
| |
| APPL_TRACE_DEBUG ("bta_ag_sco_disc_cback(): scb[0] addr: 0x%08x in_use: %u sco_idx: 0x%x sco state: %u", |
| &bta_ag_cb.scb[0], bta_ag_cb.scb[0].in_use, bta_ag_cb.scb[0].sco_idx, bta_ag_cb.scb[0].state); |
| APPL_TRACE_DEBUG ("bta_ag_sco_disc_cback(): scb[1] addr: 0x%08x in_use: %u sco_idx: 0x%x sco state: %u", |
| &bta_ag_cb.scb[1], bta_ag_cb.scb[1].in_use, bta_ag_cb.scb[1].sco_idx, bta_ag_cb.scb[1].state); |
| |
| /* match callback to scb */ |
| if (bta_ag_cb.sco.p_curr_scb != NULL && bta_ag_cb.sco.p_curr_scb->in_use) |
| { |
| /* We only care about callbacks for the active SCO */ |
| if (bta_ag_cb.sco.p_curr_scb->sco_idx != sco_idx) |
| { |
| if (bta_ag_cb.sco.p_curr_scb->sco_idx != 0xFFFF) |
| return; |
| } |
| handle = bta_ag_scb_to_idx(bta_ag_cb.sco.p_curr_scb); |
| } |
| |
| if (handle != 0) |
| { |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| tBTM_STATUS status = BTM_ConfigScoPath(BTM_SCO_ROUTE_PCM, NULL, NULL, TRUE); |
| APPL_TRACE_DEBUG("bta_ag_sco_disc_cback sco close config status = %d", status); |
| /* SCO clean up here */ |
| bta_dm_sco_co_close(); |
| #endif |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| /* Restore settings */ |
| if(bta_ag_cb.sco.p_curr_scb->inuse_codec == BTA_AG_CODEC_MSBC) |
| { |
| #if (BLUETOOTH_QTI_SW == FALSE) /* This change is not needed.*/ |
| /* set_sco_codec(BTM_SCO_CODEC_NONE); we should get a close */ |
| BTM_WriteVoiceSettings (BTM_VOICE_SETTING_CVSD); |
| #endif |
| |
| /* If SCO open was initiated by AG and failed for mSBC,then switch to CVSD |
| as our BT SOC has already tried the T1 safe setting for SCO failure before |
| updating to the BT HOST.*/ |
| if (bta_ag_sco_is_opening (bta_ag_cb.sco.p_curr_scb)) |
| { |
| #if (BLUETOOTH_QTI_SW == FALSE) /* This change is not needed.*/ |
| if (bta_ag_cb.sco.p_curr_scb->codec_msbc_settings == BTA_AG_SCO_MSBC_SETTINGS_T2) |
| { |
| APPL_TRACE_DEBUG("Fallback to mSBC T1 settings"); |
| bta_ag_cb.sco.p_curr_scb->codec_msbc_settings = BTA_AG_SCO_MSBC_SETTINGS_T1; |
| } |
| else |
| { |
| APPL_TRACE_DEBUG("Fallback to CVSD settings"); |
| bta_ag_cb.sco.p_curr_scb->codec_fallback = TRUE; |
| } |
| #else |
| { |
| APPL_TRACE_DEBUG("Fallback to CVSD settings"); |
| bta_ag_cb.sco.p_curr_scb->codec_fallback = TRUE; |
| } |
| #endif |
| } |
| } |
| |
| bta_ag_cb.sco.p_curr_scb->inuse_codec = BTA_AG_CODEC_NONE; |
| #endif |
| |
| BT_HDR *p_buf = (BT_HDR *)osi_malloc(sizeof(BT_HDR)); |
| p_buf->event = BTA_AG_SCO_CLOSE_EVT; |
| p_buf->layer_specific = handle; |
| bta_sys_sendmsg(p_buf); |
| if (interop_match_addr(INTEROP_DISABLE_SNIFF_POLICY_DURING_SCO, |
| (const bt_bdaddr_t *)&bta_ag_cb.sco.p_curr_scb->peer_addr)) { |
| bta_dm_pm_set_sniff_policy_toggle(bta_ag_cb.sco.p_curr_scb->peer_addr, false); |
| } |
| } else { |
| /* no match found */ |
| APPL_TRACE_DEBUG("no scb for ag_sco_disc_cback"); |
| |
| /* sco could be closed after scb dealloc'ed */ |
| if (bta_ag_cb.sco.p_curr_scb != NULL) |
| { |
| bta_ag_cb.sco.p_curr_scb->sco_idx = BTM_INVALID_SCO_INDEX; |
| bta_ag_cb.sco.p_curr_scb = NULL; |
| bta_ag_cb.sco.state = BTA_AG_SCO_SHUTDOWN_ST; |
| } |
| } |
| } |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_read_cback |
| ** |
| ** Description Callback function is the callback function for incoming |
| ** SCO data over HCI. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_ag_sco_read_cback (UINT16 sco_inx, BT_HDR *p_data, tBTM_SCO_DATA_FLAG status) |
| { |
| if (status != BTM_SCO_DATA_CORRECT) |
| { |
| APPL_TRACE_DEBUG("bta_ag_sco_read_cback: status(%d)", status); |
| } |
| |
| /* Callout function must free the data. */ |
| bta_dm_sco_co_in_data (p_data, status); |
| } |
| #endif |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_remove_sco |
| ** |
| ** Description Removes the specified SCO from the system. |
| ** If only_active is TRUE, then SCO is only removed if connected |
| ** |
| ** Returns BOOLEAN - TRUE if Sco removal was started |
| ** |
| *******************************************************************************/ |
| static BOOLEAN bta_ag_remove_sco(tBTA_AG_SCB *p_scb, BOOLEAN only_active) |
| { |
| BOOLEAN removed_started = FALSE; |
| tBTM_STATUS status; |
| |
| if (p_scb->sco_idx != BTM_INVALID_SCO_INDEX) |
| { |
| if (!only_active || p_scb->sco_idx == bta_ag_cb.sco.cur_idx) |
| { |
| status = BTM_RemoveSco(p_scb->sco_idx); |
| |
| APPL_TRACE_IMP("ag remove sco: inx 0x%04x, status:0x%x", p_scb->sco_idx, status); |
| |
| if (status == BTM_CMD_STARTED) |
| { |
| /* Sco is connected; set current control block */ |
| bta_ag_cb.sco.p_curr_scb = p_scb; |
| |
| removed_started = TRUE; |
| } |
| /* If no connection reset the sco handle */ |
| else if ( (status == BTM_SUCCESS) || (status == BTM_UNKNOWN_ADDR) ) |
| { |
| p_scb->sco_idx = BTM_INVALID_SCO_INDEX; |
| } |
| } |
| } |
| return removed_started; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_esco_connreq_cback |
| ** |
| ** Description BTM eSCO connection requests and eSCO change requests |
| ** Only the connection requests are processed by BTA. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_ag_esco_connreq_cback(tBTM_ESCO_EVT event, tBTM_ESCO_EVT_DATA *p_data) |
| { |
| tBTA_AG_SCB *p_scb; |
| UINT16 handle; |
| UINT16 sco_inx = p_data->conn_evt.sco_inx; |
| |
| /* Only process connection requests */ |
| if (event == BTM_ESCO_CONN_REQ_EVT) |
| { |
| if ((handle = bta_ag_idx_by_bdaddr(BTM_ReadScoBdAddr(sco_inx))) != 0 && |
| ((p_scb = bta_ag_scb_by_idx(handle)) != NULL) && p_scb->svc_conn) |
| { |
| p_scb->sco_idx = sco_inx; |
| |
| /* If no other SCO active, allow this one */ |
| if (!bta_ag_cb.sco.p_curr_scb) |
| { |
| APPL_TRACE_IMP("bta_ag_esco_connreq_cback: Accept Conn Request (sco_inx 0x%04x)", sco_inx); |
| bta_ag_sco_conn_rsp(p_scb, &p_data->conn_evt); |
| |
| bta_ag_cb.sco.state = BTA_AG_SCO_OPENING_ST; |
| bta_ag_cb.sco.p_curr_scb = p_scb; |
| bta_ag_cb.sco.cur_idx = p_scb->sco_idx; |
| } |
| else /* Begin a transfer: Close current SCO before responding */ |
| { |
| APPL_TRACE_IMP("bta_ag_esco_connreq_cback: Begin XFER"); |
| bta_ag_cb.sco.p_xfer_scb = p_scb; |
| bta_ag_cb.sco.conn_data = p_data->conn_evt; |
| bta_ag_cb.sco.state = BTA_AG_SCO_OPEN_XFER_ST; |
| |
| if (!bta_ag_remove_sco(bta_ag_cb.sco.p_curr_scb, TRUE)) |
| { |
| APPL_TRACE_ERROR("bta_ag_esco_connreq_cback: Nothing to remove so accept Conn Request (sco_inx 0x%04x)", sco_inx); |
| bta_ag_cb.sco.p_xfer_scb = NULL; |
| bta_ag_cb.sco.state = BTA_AG_SCO_LISTEN_ST; |
| |
| bta_ag_sco_conn_rsp(p_scb, &p_data->conn_evt); |
| } |
| } |
| } |
| /* If error occurred send reject response immediately */ |
| else |
| { |
| APPL_TRACE_WARNING("no scb for bta_ag_esco_connreq_cback or no resources"); |
| BTM_EScoConnRsp(p_data->conn_evt.sco_inx, HCI_ERR_HOST_REJECT_RESOURCES, NULL); |
| } |
| } |
| /* Received a change in the esco link */ |
| else if (event == BTM_ESCO_CHG_EVT) |
| { |
| APPL_TRACE_EVENT("eSCO change event (inx %d): rtrans %d, rxlen %d, txlen %d, txint %d", |
| p_data->chg_evt.sco_inx, |
| p_data->chg_evt.retrans_window, p_data->chg_evt.rx_pkt_len, |
| p_data->chg_evt.tx_pkt_len, p_data->chg_evt.tx_interval); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_cback_sco |
| ** |
| ** Description Call application callback function with SCO event. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_ag_cback_sco(tBTA_AG_SCB *p_scb, UINT8 event) |
| { |
| tBTA_AG_HDR sco; |
| |
| sco.handle = bta_ag_scb_to_idx(p_scb); |
| sco.app_id = p_scb->app_id; |
| |
| /* call close cback */ |
| (*bta_ag_cb.p_cback)(event, (tBTA_AG *) &sco); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_create_sco |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_ag_create_sco(tBTA_AG_SCB *p_scb, BOOLEAN is_orig) |
| { |
| tBTM_STATUS status; |
| UINT8 *p_bd_addr = NULL; |
| tBTM_ESCO_PARAMS params; |
| int codec_index = (p_scb->peer_features & BTA_AG_PEER_FEAT_S4) ? 0 : 1; |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| tBTA_AG_PEER_CODEC esco_codec = BTM_SCO_CODEC_CVSD; |
| #endif |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| tBTM_SCO_ROUTE_TYPE sco_route; |
| tBTA_CODEC_INFO codec_info = {BTA_SCO_CODEC_PCM}; |
| UINT32 pcm_sample_rate; |
| #endif |
| |
| /* Make sure this sco handle is not already in use */ |
| if (p_scb->sco_idx != BTM_INVALID_SCO_INDEX) |
| { |
| APPL_TRACE_WARNING("bta_ag_create_sco: Index 0x%04x Already In Use!", |
| p_scb->sco_idx); |
| return; |
| } |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| if ((p_scb->sco_codec == BTM_SCO_CODEC_MSBC) && |
| !p_scb->codec_fallback && |
| !p_scb->retry_with_sco_only) |
| esco_codec = BTM_SCO_CODEC_MSBC; |
| |
| if (p_scb->codec_fallback) |
| { |
| p_scb->codec_fallback = FALSE; |
| |
| /* Force AG to send +BCS for the next audio connection. */ |
| p_scb->codec_updated = TRUE; |
| } |
| |
| /* If WBS included, use CVSD by default, index is 0 for CVSD by initialization */ |
| /* If eSCO codec is mSBC, index is T2 or T1 */ |
| if (esco_codec == BTM_SCO_CODEC_MSBC) |
| { |
| if (p_scb->codec_msbc_settings == BTA_AG_SCO_MSBC_SETTINGS_T2) |
| { |
| codec_index = BTA_AG_ESCO_SETTING_IDX_T2; |
| } |
| else |
| { |
| codec_index = BTA_AG_ESCO_SETTING_IDX_T1; |
| } |
| } |
| |
| params = bta_ag_esco_params[codec_index]; |
| #else |
| /* When WBS is not included, use CVSD by default */ |
| params = bta_ag_esco_params[codec_index]; |
| #endif |
| |
| if(bta_ag_cb.sco.param_updated) /* If we do not use the default parameters */ |
| params = bta_ag_cb.sco.params; |
| |
| if(!bta_ag_cb.sco.param_updated) |
| { |
| #if (BTM_WBS_INCLUDED == TRUE) |
| if (esco_codec == BTM_SCO_CODEC_CVSD) /* For CVSD */ |
| #endif |
| { |
| /* Use the application packet types (5 slot EV packets not allowed) */ |
| params.packet_types = p_bta_ag_cfg->sco_pkt_types | |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5; |
| } |
| } |
| |
| /* if initiating set current scb and peer bd addr */ |
| if (is_orig) |
| { |
| /* Attempt to use eSCO if remote host supports HFP >= 1.5 */ |
| /* Need to find out from SIG if HSP can use eSCO; for now use SCO */ |
| if (p_scb->conn_service == BTA_AG_HFP && p_scb->peer_version >= HFP_VERSION_1_5 && !p_scb->retry_with_sco_only) |
| { |
| |
| BTM_SetEScoMode(BTM_LINK_TYPE_ESCO, ¶ms); |
| /* If ESCO or EDR ESCO, retry with SCO only in case of failure */ |
| if((params.packet_types & BTM_ESCO_LINK_ONLY_MASK) |
| ||!((params.packet_types & ~(BTM_ESCO_LINK_ONLY_MASK | BTM_SCO_LINK_ONLY_MASK)) ^ BTA_AG_NO_EDR_ESCO)) |
| { |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| if (esco_codec != BTA_AG_CODEC_MSBC) |
| { |
| p_scb->retry_with_sco_only = TRUE; |
| APPL_TRACE_API("Setting retry_with_sco_only to TRUE"); |
| } |
| else /* Do not use SCO when using mSBC */ |
| { |
| p_scb->retry_with_sco_only = FALSE; |
| APPL_TRACE_API("Setting retry_with_sco_only to FALSE"); |
| } |
| #else |
| p_scb->retry_with_sco_only = TRUE; |
| APPL_TRACE_API("Setting retry_with_sco_only to TRUE"); |
| #endif |
| } |
| } |
| else |
| { |
| if(p_scb->retry_with_sco_only) |
| APPL_TRACE_API("retrying with SCO only"); |
| p_scb->retry_with_sco_only = FALSE; |
| |
| BTM_SetEScoMode(BTM_LINK_TYPE_SCO, ¶ms); |
| } |
| |
| bta_ag_cb.sco.p_curr_scb = p_scb; |
| |
| /* tell sys to stop av if any */ |
| bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| #if (BLUETOOTH_QTI_SW == FALSE) /* These changes are not needed*/ |
| /* Allow any platform specific pre-SCO set up to take place */ |
| bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, SCO_STATE_SETUP, |
| esco_codec); |
| |
| /* This setting may not be necessary */ |
| /* To be verified with stable 2049 boards */ |
| if (esco_codec == BTA_AG_CODEC_MSBC) |
| BTM_WriteVoiceSettings (BTM_VOICE_SETTING_TRANS); |
| else |
| BTM_WriteVoiceSettings (BTM_VOICE_SETTING_CVSD); |
| #endif |
| /* save the current codec because sco_codec can be updated while SCO is open. */ |
| p_scb->inuse_codec = esco_codec; |
| #else |
| /* Allow any platform specific pre-SCO set up to take place */ |
| bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, SCO_STATE_SETUP); |
| #endif |
| |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| #if (BTM_WBS_INCLUDED == TRUE) |
| if (esco_codec == BTA_AG_CODEC_MSBC) |
| pcm_sample_rate = BTA_DM_SCO_SAMP_RATE_16K; |
| else |
| #endif |
| pcm_sample_rate = BTA_DM_SCO_SAMP_RATE_8K; |
| |
| sco_route = bta_dm_sco_co_init(pcm_sample_rate, pcm_sample_rate, &codec_info, p_scb->app_id); |
| #endif |
| |
| |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| /* initialize SCO setup, no voice setting for AG, data rate <==> sample rate */ |
| BTM_ConfigScoPath(sco_route, bta_ag_sco_read_cback, NULL, TRUE); |
| #endif |
| bta_ag_cb.sco.cur_idx = p_scb->sco_idx; |
| } |
| else |
| p_scb->retry_with_sco_only = FALSE; |
| |
| p_bd_addr = p_scb->peer_addr; |
| |
| status = BTM_CreateSco(p_bd_addr, is_orig, params.packet_types, |
| &p_scb->sco_idx, bta_ag_sco_conn_cback, |
| bta_ag_sco_disc_cback); |
| if (status == BTM_CMD_STARTED) |
| { |
| if (!is_orig) |
| { |
| BTM_RegForEScoEvts(p_scb->sco_idx, bta_ag_esco_connreq_cback); |
| } |
| else /* Initiating the connection, set the current sco handle */ |
| { |
| bta_ag_cb.sco.cur_idx = p_scb->sco_idx; |
| } |
| } |
| |
| APPL_TRACE_IMP("ag create sco: orig %d, inx 0x%04x, status 0x%x, pkt types 0x%04x", |
| is_orig, p_scb->sco_idx, status, params.packet_types); |
| } |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_attempt_msbc_safe_settings |
| ** |
| ** Description Checks if ESCO connection needs to be attempted using mSBC T1(safe) settings |
| ** |
| ** |
| ** Returns TRUE if T1 settings has to be used, FALSE otherwise |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_ag_attempt_msbc_safe_settings(tBTA_AG_SCB *p_scb) |
| { |
| if (p_scb->svc_conn && p_scb->sco_codec == BTM_SCO_CODEC_MSBC && |
| p_scb->codec_msbc_settings == BTA_AG_SCO_MSBC_SETTINGS_T1) |
| return TRUE; |
| else |
| return FALSE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_codec_negotiation_timer_cback |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_ag_codec_negotiation_timer_cback(void *data) |
| { |
| tBTA_AG_SCB *p_scb = (tBTA_AG_SCB *)data; |
| |
| APPL_TRACE_IMP("codec negotiation timedout, aborting SCO/eSCO creation"); |
| |
| GENERATE_VND_LOGS(); |
| |
| /* Announce that codec negotiation failed. */ |
| bta_ag_sco_codec_nego(p_scb, FALSE); |
| |
| /* call app callback */ |
| bta_ag_cback_sco(p_scb, BTA_AG_AUDIO_CLOSE_EVT); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_codec_negotiate |
| ** |
| ** Description Initiate codec negotiation by sending AT command. |
| ** If not necessary, skip negotiation. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_codec_negotiate(tBTA_AG_SCB *p_scb) |
| { |
| bta_ag_cb.sco.p_curr_scb = p_scb; |
| |
| if ((p_scb->codec_updated || p_scb->codec_fallback || |
| bta_ag_attempt_msbc_safe_settings(p_scb)) && |
| (p_scb->peer_features & BTA_AG_PEER_FEAT_CODEC)) |
| { |
| /* Change the power mode to Active until sco open is completed. */ |
| bta_sys_busy(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| |
| /* Send +BCS to the peer */ |
| bta_ag_send_bcs(p_scb, NULL); |
| |
| /* Start timer to handle timeout */ |
| alarm_set_on_queue(p_scb->codec_negotiation_timer, |
| BTA_AG_CODEC_NEGOTIATION_TIMEOUT_MS, |
| bta_ag_codec_negotiation_timer_cback, |
| p_scb, |
| btu_bta_alarm_queue); |
| } |
| else |
| { |
| /* use same codec type as previous SCO connection, skip codec negotiation */ |
| APPL_TRACE_DEBUG("use same codec type as previous SCO connection,skip codec negotiation"); |
| bta_ag_sco_codec_nego(p_scb, TRUE); |
| } |
| } |
| #endif /* (BTM_WBS_INCLUDED == TRUE ) */ |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_event |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void bta_ag_sco_event(tBTA_AG_SCB *p_scb, UINT8 event) |
| { |
| tBTA_AG_SCO_CB *p_sco = &bta_ag_cb.sco; |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| tBTA_AG_SCB *p_cn_scb = NULL; /* For codec negotiation */ |
| #endif |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| BT_HDR *p_buf; |
| #endif |
| UINT8 in_state = p_sco->state; |
| |
| #if BTA_AG_SCO_DEBUG == TRUE |
| APPL_TRACE_IMP("BTA ag sco evt (hdl 0x%04x): State %d (%s), Event %d (%s)", |
| p_scb->sco_idx, |
| p_sco->state, bta_ag_sco_state_str(p_sco->state), |
| event, bta_ag_sco_evt_str(event)); |
| #else |
| APPL_TRACE_IMP("BTA ag sco evt (hdl 0x%04x): State %d, Event %d", |
| p_scb->sco_idx, p_sco->state, event); |
| #endif |
| |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| if (event == BTA_AG_SCO_CI_DATA_E) |
| { |
| while (TRUE) |
| { |
| bta_dm_sco_co_out_data(&p_buf); |
| if (p_buf) |
| { |
| if (p_sco->state == BTA_AG_SCO_OPEN_ST) |
| BTM_WriteScoData(p_sco->p_curr_scb->sco_idx, p_buf); |
| else |
| osi_free(p_buf); |
| } |
| else |
| break; |
| } |
| |
| return; |
| } |
| #endif |
| |
| switch (p_sco->state) |
| { |
| case BTA_AG_SCO_SHUTDOWN_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_LISTEN_E: |
| /* create sco listen connection */ |
| bta_ag_create_sco(p_scb, FALSE); |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_SHUTDOWN_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| case BTA_AG_SCO_LISTEN_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_LISTEN_E: |
| /* create sco listen connection (Additional channel) */ |
| bta_ag_create_sco(p_scb, FALSE); |
| break; |
| |
| case BTA_AG_SCO_OPEN_E: |
| /* remove listening connection */ |
| bta_ag_remove_sco(p_scb, FALSE); |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| if (p_scb->peer_codecs != BTA_AG_CODEC_NONE) |
| { |
| /* start codec negotiation */ |
| p_sco->state = BTA_AG_SCO_CODEC_ST; |
| p_cn_scb = p_scb; |
| } |
| else |
| { |
| bta_ag_create_sco(p_scb, TRUE); |
| p_sco->state = BTA_AG_SCO_OPENING_ST; |
| } |
| #else |
| /* create sco connection to peer */ |
| bta_ag_create_sco(p_scb, TRUE); |
| p_sco->state = BTA_AG_SCO_OPENING_ST; |
| #endif |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| /* remove listening connection */ |
| bta_ag_remove_sco(p_scb, FALSE); |
| |
| if (p_scb == p_sco->p_curr_scb) |
| p_sco->p_curr_scb = NULL; |
| |
| /* If last SCO instance then finish shutting down */ |
| if (!bta_ag_other_scb_open(p_scb)) |
| { |
| p_sco->state = BTA_AG_SCO_SHUTDOWN_ST; |
| } |
| break; |
| |
| case BTA_AG_SCO_CLOSE_E: |
| /* remove listening connection */ |
| /* Ignore the event. We need to keep listening SCO for the active SLC */ |
| APPL_TRACE_WARNING("BTA_AG_SCO_LISTEN_ST: Ignoring event %d", event); |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| /* sco failed; create sco listen connection */ |
| bta_ag_create_sco(p_scb, FALSE); |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_LISTEN_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| case BTA_AG_SCO_CODEC_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_LISTEN_E: |
| /* create sco listen connection (Additional channel) */ |
| bta_ag_create_sco(p_scb, FALSE); |
| break; |
| |
| case BTA_AG_SCO_CN_DONE_E: |
| /* create sco connection to peer */ |
| bta_ag_create_sco(p_scb, TRUE); |
| p_sco->state = BTA_AG_SCO_OPENING_ST; |
| break; |
| |
| case BTA_AG_SCO_XFER_E: |
| /* save xfer scb */ |
| p_sco->p_xfer_scb = p_scb; |
| p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST; |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| /* remove listening connection */ |
| bta_ag_remove_sco(p_scb, FALSE); |
| |
| if (p_scb == p_sco->p_curr_scb) |
| p_sco->p_curr_scb = NULL; |
| |
| /* If last SCO instance then finish shutting down */ |
| if (!bta_ag_other_scb_open(p_scb)) |
| { |
| p_sco->state = BTA_AG_SCO_SHUTDOWN_ST; |
| } |
| break; |
| |
| case BTA_AG_SCO_CLOSE_E: |
| /* sco open is not started yet. just go back to listening */ |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| /* sco failed; create sco listen connection */ |
| bta_ag_create_sco(p_scb, FALSE); |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_CODEC_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| #endif |
| |
| case BTA_AG_SCO_OPENING_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_LISTEN_E: |
| /* second headset has now joined */ |
| /* create sco listen connection (Additional channel) */ |
| if (p_scb != p_sco->p_curr_scb) |
| { |
| bta_ag_create_sco(p_scb, FALSE); |
| } |
| break; |
| |
| #if (BTM_WBS_INCLUDED == TRUE) |
| case BTA_AG_SCO_REOPEN_E: |
| /* start codec negotiation */ |
| p_sco->state = BTA_AG_SCO_CODEC_ST; |
| p_cn_scb = p_scb; |
| break; |
| #endif |
| |
| case BTA_AG_SCO_XFER_E: |
| /* save xfer scb */ |
| p_sco->p_xfer_scb = p_scb; |
| p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST; |
| break; |
| |
| case BTA_AG_SCO_CLOSE_E: |
| p_sco->state = BTA_AG_SCO_OPEN_CL_ST; |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| /* remove listening connection */ |
| bta_ag_remove_sco(p_scb, FALSE); |
| |
| if (p_scb == p_sco->p_curr_scb) |
| { |
| p_sco->p_curr_scb = NULL; |
| } |
| |
| /* If last SCO instance then finish shutting down */ |
| if (!bta_ag_other_scb_open(p_scb)) |
| { |
| p_sco->state = BTA_AG_SCO_SHUTDOWN_ST; |
| } |
| break; |
| |
| case BTA_AG_SCO_CONN_OPEN_E: |
| p_sco->state = BTA_AG_SCO_OPEN_ST; |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| /* sco failed; create sco listen connection */ |
| bta_ag_create_sco(p_scb, FALSE); |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_OPENING_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| case BTA_AG_SCO_OPEN_CL_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_XFER_E: |
| /* save xfer scb */ |
| p_sco->p_xfer_scb = p_scb; |
| |
| p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST; |
| break; |
| |
| case BTA_AG_SCO_OPEN_E: |
| p_sco->state = BTA_AG_SCO_OPENING_ST; |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| /* remove listening connection */ |
| bta_ag_remove_sco(p_scb, FALSE); |
| |
| if (p_scb == p_sco->p_curr_scb) |
| { |
| p_sco->p_curr_scb = NULL; |
| } |
| |
| /* If last SCO instance then finish shutting down */ |
| if (!bta_ag_other_scb_open(p_scb)) |
| { |
| p_sco->state = BTA_AG_SCO_SHUTDOWN_ST; |
| } |
| break; |
| |
| case BTA_AG_SCO_CONN_OPEN_E: |
| /* close sco connection */ |
| bta_ag_remove_sco(p_scb, TRUE); |
| |
| p_sco->state = BTA_AG_SCO_CLOSING_ST; |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| /* sco failed; create sco listen connection */ |
| |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_OPEN_CL_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| case BTA_AG_SCO_OPEN_XFER_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_CLOSE_E: |
| /* close sco connection */ |
| bta_ag_remove_sco(p_scb, TRUE); |
| |
| p_sco->state = BTA_AG_SCO_CLOSING_ST; |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| /* remove all connection */ |
| bta_ag_remove_sco(p_scb, FALSE); |
| p_sco->state = BTA_AG_SCO_SHUTTING_ST; |
| |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| /* closed sco; place in listen mode and |
| accept the transferred connection */ |
| bta_ag_create_sco(p_scb, FALSE); /* Back into listen mode */ |
| |
| /* Accept sco connection with xfer scb */ |
| bta_ag_sco_conn_rsp(p_sco->p_xfer_scb, &p_sco->conn_data); |
| p_sco->state = BTA_AG_SCO_OPENING_ST; |
| p_sco->p_curr_scb = p_sco->p_xfer_scb; |
| p_sco->cur_idx = p_sco->p_xfer_scb->sco_idx; |
| p_sco->p_xfer_scb = NULL; |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_OPEN_XFER_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| case BTA_AG_SCO_OPEN_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_LISTEN_E: |
| /* second headset has now joined */ |
| /* create sco listen connection (Additional channel) */ |
| if (p_scb != p_sco->p_curr_scb) |
| { |
| bta_ag_create_sco(p_scb, FALSE); |
| } |
| break; |
| |
| case BTA_AG_SCO_XFER_E: |
| /* close current sco connection */ |
| bta_ag_remove_sco(p_sco->p_curr_scb, TRUE); |
| |
| /* save xfer scb */ |
| p_sco->p_xfer_scb = p_scb; |
| |
| p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST; |
| break; |
| |
| case BTA_AG_SCO_CLOSE_E: |
| /* close sco connection if active */ |
| if (bta_ag_remove_sco(p_scb, TRUE)) |
| { |
| p_sco->state = BTA_AG_SCO_CLOSING_ST; |
| } |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| /* remove all listening connections */ |
| bta_ag_remove_sco(p_scb, FALSE); |
| |
| /* If SCO was active on this scb, close it */ |
| if (p_scb == p_sco->p_curr_scb) |
| { |
| p_sco->state = BTA_AG_SCO_SHUTTING_ST; |
| } |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| /* peer closed sco; create sco listen connection */ |
| bta_ag_create_sco(p_scb, FALSE); |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_OPEN_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| case BTA_AG_SCO_CLOSING_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_LISTEN_E: |
| /* create sco listen connection (Additional channel) */ |
| if (p_scb != p_sco->p_curr_scb) |
| { |
| bta_ag_create_sco(p_scb, FALSE); |
| } |
| break; |
| |
| case BTA_AG_SCO_OPEN_E: |
| p_sco->state = BTA_AG_SCO_CLOSE_OP_ST; |
| break; |
| |
| case BTA_AG_SCO_XFER_E: |
| /* save xfer scb */ |
| p_sco->p_xfer_scb = p_scb; |
| |
| p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST; |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| /* If not closing scb, just close it */ |
| if (p_scb != p_sco->p_curr_scb) |
| { |
| /* remove listening connection */ |
| bta_ag_remove_sco(p_scb, FALSE); |
| } |
| else |
| p_sco->state = BTA_AG_SCO_SHUTTING_ST; |
| |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| /* peer closed sco; create sco listen connection */ |
| bta_ag_create_sco(p_scb, FALSE); |
| |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_CLOSING_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| case BTA_AG_SCO_CLOSE_OP_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_CLOSE_E: |
| p_sco->state = BTA_AG_SCO_CLOSING_ST; |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| p_sco->state = BTA_AG_SCO_SHUTTING_ST; |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| if (p_scb->peer_codecs != BTA_AG_CODEC_NONE) |
| { |
| /* start codec negotiation */ |
| p_sco->state = BTA_AG_SCO_CODEC_ST; |
| p_cn_scb = p_scb; |
| } |
| else |
| { |
| bta_ag_create_sco(p_scb, TRUE); |
| p_sco->state = BTA_AG_SCO_OPENING_ST; |
| } |
| #else |
| /* open sco connection */ |
| bta_ag_create_sco(p_scb, TRUE); |
| p_sco->state = BTA_AG_SCO_OPENING_ST; |
| #endif |
| break; |
| |
| case BTA_AG_SCO_LISTEN_E: |
| /* create sco listen connection (Additional channel) */ |
| if (p_scb != p_sco->p_curr_scb) |
| { |
| bta_ag_create_sco(p_scb, FALSE); |
| } |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_CLOSE_OP_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| case BTA_AG_SCO_CLOSE_XFER_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_CONN_OPEN_E: |
| /* close sco connection so headset can be transferred |
| Probably entered this state from "opening state" */ |
| bta_ag_remove_sco(p_scb, TRUE); |
| break; |
| |
| case BTA_AG_SCO_CLOSE_E: |
| /* clear xfer scb */ |
| p_sco->p_xfer_scb = NULL; |
| |
| p_sco->state = BTA_AG_SCO_CLOSING_ST; |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| /* clear xfer scb */ |
| p_sco->p_xfer_scb = NULL; |
| |
| p_sco->state = BTA_AG_SCO_SHUTTING_ST; |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| /* closed sco; place old sco in listen mode, |
| take current sco out of listen, and |
| create originating sco for current */ |
| bta_ag_create_sco(p_scb, FALSE); |
| bta_ag_remove_sco(p_sco->p_xfer_scb, FALSE); |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| if (p_scb->peer_codecs != BTA_AG_CODEC_NONE) |
| { |
| /* start codec negotiation */ |
| p_sco->state = BTA_AG_SCO_CODEC_ST; |
| p_cn_scb = p_sco->p_xfer_scb; |
| p_sco->p_xfer_scb = NULL; |
| } |
| else |
| { |
| bta_ag_create_sco(p_sco->p_xfer_scb, TRUE); |
| p_sco->p_xfer_scb = NULL; |
| p_sco->state = BTA_AG_SCO_OPENING_ST; |
| } |
| #else |
| /* create sco connection to peer */ |
| bta_ag_create_sco(p_sco->p_xfer_scb, TRUE); |
| p_sco->p_xfer_scb = NULL; |
| p_sco->state = BTA_AG_SCO_OPENING_ST; |
| #endif |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_CLOSE_XFER_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| case BTA_AG_SCO_SHUTTING_ST: |
| switch (event) |
| { |
| case BTA_AG_SCO_CONN_OPEN_E: |
| /* close sco connection; wait for conn close event */ |
| bta_ag_remove_sco(p_scb, TRUE); |
| break; |
| |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| /* If last SCO instance then finish shutting down */ |
| if (!bta_ag_other_scb_open(p_scb)) |
| { |
| p_sco->state = BTA_AG_SCO_SHUTDOWN_ST; |
| } |
| else /* Other instance is still listening */ |
| { |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| } |
| |
| /* If SCO closed for other HS which is not being disconnected, |
| then create listen sco connection for it as scb still open */ |
| if (bta_ag_scb_open(p_scb)) |
| { |
| bta_ag_create_sco(p_scb, FALSE); |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| } |
| |
| if (p_scb == p_sco->p_curr_scb) |
| { |
| p_sco->p_curr_scb->sco_idx = BTM_INVALID_SCO_INDEX; |
| p_sco->p_curr_scb = NULL; |
| } |
| break; |
| |
| case BTA_AG_SCO_LISTEN_E: |
| /* create sco listen connection (Additional channel) */ |
| if (p_scb != p_sco->p_curr_scb) |
| { |
| bta_ag_create_sco(p_scb, FALSE); |
| } |
| break; |
| |
| case BTA_AG_SCO_SHUTDOWN_E: |
| if (!bta_ag_other_scb_open(p_scb)) |
| { |
| p_sco->state = BTA_AG_SCO_SHUTDOWN_ST; |
| } |
| else /* Other instance is still listening */ |
| { |
| p_sco->state = BTA_AG_SCO_LISTEN_ST; |
| } |
| |
| if (p_scb == p_sco->p_curr_scb) |
| { |
| p_sco->p_curr_scb->sco_idx = BTM_INVALID_SCO_INDEX; |
| p_sco->p_curr_scb = NULL; |
| } |
| break; |
| |
| default: |
| APPL_TRACE_WARNING("BTA_AG_SCO_SHUTTING_ST: Ignoring event %d", event); |
| break; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| if (p_sco->state != in_state) |
| { |
| #if BTA_AG_SCO_DEBUG == TRUE |
| APPL_TRACE_IMP("BTA AG SCO State Change: [%s] -> [%s] after Event [%s]", |
| bta_ag_sco_state_str(in_state), |
| bta_ag_sco_state_str(p_sco->state), |
| bta_ag_sco_evt_str(event)); |
| #else |
| APPL_TRACE_IMP("BTA AG SCO State Change: [%d] -> [%d] after Event [%d]", |
| in_state, p_sco->state, event); |
| #endif |
| } |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| if (p_cn_scb) |
| { |
| bta_ag_codec_negotiate(p_cn_scb); |
| } |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_is_open |
| ** |
| ** Description Check if sco is open for this scb. |
| ** |
| ** |
| ** Returns TRUE if sco open for this scb, FALSE otherwise. |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_ag_sco_is_open(tBTA_AG_SCB *p_scb) |
| { |
| return ((bta_ag_cb.sco.state == BTA_AG_SCO_OPEN_ST) && |
| (bta_ag_cb.sco.p_curr_scb == p_scb)); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_is_opening |
| ** |
| ** Description Check if sco is in Opening state. |
| ** |
| ** |
| ** Returns TRUE if sco is in Opening state for this scb, FALSE otherwise. |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_ag_sco_is_opening(tBTA_AG_SCB *p_scb) |
| { |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| return (((bta_ag_cb.sco.state == BTA_AG_SCO_OPENING_ST) || |
| (bta_ag_cb.sco.state == BTA_AG_SCO_OPENING_ST)) && |
| (bta_ag_cb.sco.p_curr_scb == p_scb)); |
| #else |
| return ((bta_ag_cb.sco.state == BTA_AG_SCO_OPENING_ST) && |
| (bta_ag_cb.sco.p_curr_scb == p_scb)); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_listen |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_sco_listen(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data) |
| { |
| UNUSED(p_data); |
| bta_ag_sco_event(p_scb, BTA_AG_SCO_LISTEN_E); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_open |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_sco_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data) |
| { |
| UINT8 event; |
| UNUSED(p_data); |
| |
| /* if another scb using sco, this is a transfer */ |
| if (bta_ag_cb.sco.p_curr_scb != NULL && bta_ag_cb.sco.p_curr_scb != p_scb) |
| { |
| event = BTA_AG_SCO_XFER_E; |
| } |
| /* else it is an open */ |
| else |
| { |
| event = BTA_AG_SCO_OPEN_E; |
| } |
| |
| bta_ag_sco_event(p_scb, event); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_close |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_sco_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| /* if scb is in use */ |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| /* sco_idx is not allocated in SCO_CODEC_ST, we still need to move to listening state. */ |
| if ((p_scb->sco_idx != BTM_INVALID_SCO_INDEX) || (bta_ag_cb.sco.state == BTA_AG_SCO_CODEC_ST)) |
| #else |
| if (p_scb->sco_idx != BTM_INVALID_SCO_INDEX) |
| #endif |
| { |
| APPL_TRACE_IMP("bta_ag_sco_close: sco_inx = %d", p_scb->sco_idx); |
| bta_ag_sco_event(p_scb, BTA_AG_SCO_CLOSE_E); |
| } |
| } |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_codec_nego |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_sco_codec_nego(tBTA_AG_SCB *p_scb, BOOLEAN result) |
| { |
| if(result == TRUE) |
| { |
| /* Subsequent sco connection will skip codec negotiation */ |
| p_scb->codec_updated = FALSE; |
| |
| bta_ag_sco_event(p_scb, BTA_AG_SCO_CN_DONE_E); |
| } |
| else /* codec negotiation failed */ |
| bta_ag_sco_event(p_scb, BTA_AG_SCO_CLOSE_E); |
| } |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_shutdown |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_sco_shutdown(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| bta_ag_sco_event(p_scb, BTA_AG_SCO_SHUTDOWN_E); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_conn_open |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_sco_conn_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data) |
| { |
| UNUSED(p_data); |
| |
| bta_ag_sco_event(p_scb, BTA_AG_SCO_CONN_OPEN_E); |
| |
| bta_sys_sco_open(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| |
| #if (BTM_WBS_INCLUDED == TRUE) |
| bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, SCO_STATE_ON, |
| p_scb->inuse_codec); |
| #else |
| bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, SCO_STATE_ON); |
| #endif |
| |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| /* open SCO codec if SCO is routed through transport */ |
| bta_dm_sco_co_open(bta_ag_scb_to_idx(p_scb), BTA_SCO_OUT_PKT_SIZE, BTA_AG_CI_SCO_DATA_EVT); |
| #endif |
| |
| /* call app callback */ |
| bta_ag_cback_sco(p_scb, BTA_AG_AUDIO_OPEN_EVT); |
| |
| p_scb->retry_with_sco_only = FALSE; |
| #if (BTM_WBS_INCLUDED == TRUE) |
| /* reset to mSBC T2 settings as the preferred */ |
| p_scb->codec_msbc_settings = BTA_AG_SCO_MSBC_SETTINGS_T2; |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_conn_close |
| ** |
| ** Description |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_sco_conn_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data) |
| { |
| UINT16 handle = bta_ag_scb_to_idx(p_scb); |
| UNUSED(p_data); |
| |
| /* clear current scb */ |
| bta_ag_cb.sco.p_curr_scb = NULL; |
| p_scb->sco_idx = BTM_INVALID_SCO_INDEX; |
| |
| #if (BTM_WBS_INCLUDED == TRUE) |
| /* codec_fallback is set when AG is initiator and connection failed for mSBC. */ |
| /* OR if codec is msbc and T2 settings failed, then retry Safe T1 settings */ |
| if ((p_scb->codec_fallback && p_scb->svc_conn) || |
| bta_ag_attempt_msbc_safe_settings(p_scb)) |
| { |
| bta_ag_sco_event(p_scb, BTA_AG_SCO_REOPEN_E); |
| } |
| else if (p_scb->retry_with_sco_only && p_scb->svc_conn) |
| { |
| /* retry_with_sco_only is set when AG is initiator and connection failed for eSCO */ |
| bta_ag_create_sco(p_scb, TRUE); |
| } |
| #else |
| /* retry_with_sco_only, will be set only when AG is initiator |
| ** and AG is first trying to establish an eSCO connection */ |
| if (p_scb->retry_with_sco_only && p_scb->svc_conn) |
| { |
| bta_ag_create_sco(p_scb, TRUE); |
| } |
| #endif |
| else |
| { |
| sco_state_t sco_state = bta_ag_cb.sco.p_xfer_scb ? SCO_STATE_OFF_TRANSFER : SCO_STATE_OFF; |
| #if (BTM_WBS_INCLUDED == TRUE) |
| /* Indicate if the closing of audio is because of transfer */ |
| bta_ag_co_audio_state(handle, p_scb->app_id, sco_state, p_scb->inuse_codec); |
| #else |
| /* Indicate if the closing of audio is because of transfer */ |
| bta_ag_co_audio_state(handle, p_scb->app_id, sco_state); |
| #endif |
| bta_ag_sco_event(p_scb, BTA_AG_SCO_CONN_CLOSE_E); |
| |
| bta_sys_sco_close(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| |
| /* if av got suspended by this call, let it resume. */ |
| /* In case call stays alive regardless of sco, av should not be affected. */ |
| if(((p_scb->call_ind == BTA_AG_CALL_INACTIVE) && (p_scb->callsetup_ind == BTA_AG_CALLSETUP_NONE)) |
| || (p_scb->post_sco == BTA_AG_POST_SCO_CALL_END)) |
| { |
| bta_sys_sco_unuse(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| } |
| |
| /* call app callback */ |
| bta_ag_cback_sco(p_scb, BTA_AG_AUDIO_CLOSE_EVT); |
| #if (BTM_WBS_INCLUDED == TRUE) |
| p_scb->codec_msbc_settings = BTA_AG_SCO_MSBC_SETTINGS_T2; |
| #endif |
| } |
| p_scb->retry_with_sco_only = FALSE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_sco_conn_rsp |
| ** |
| ** Description Process the SCO connection request |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_sco_conn_rsp(tBTA_AG_SCB *p_scb, tBTM_ESCO_CONN_REQ_EVT_DATA *p_data) |
| { |
| tBTM_ESCO_PARAMS resp; |
| UINT8 hci_status = HCI_SUCCESS; |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| tBTA_CODEC_INFO codec_info = {BTA_SCO_CODEC_PCM}; |
| UINT32 pcm_sample_rate; |
| #endif |
| |
| if (bta_ag_cb.sco.state == BTA_AG_SCO_LISTEN_ST || |
| bta_ag_cb.sco.state == BTA_AG_SCO_CLOSE_XFER_ST || |
| bta_ag_cb.sco.state == BTA_AG_SCO_OPEN_XFER_ST) |
| { |
| /* If script overrided sco parameter by BTA_CMD_SET_ESCO_PARAM */ |
| if (bta_ag_cb.sco.param_updated) |
| { |
| resp = bta_ag_cb.sco.params; |
| } |
| else |
| { |
| resp.rx_bw = BTM_64KBITS_RATE; |
| resp.tx_bw = BTM_64KBITS_RATE; |
| if ((p_scb->peer_features & BTA_AG_PEER_FEAT_S4) && |
| (p_scb->features & BTA_AG_PEER_FEAT_S4)) |
| { |
| APPL_TRACE_WARNING("bta_ag_sco_conn_rsp with S4 link settings"); |
| resp.max_latency = 12; |
| resp.retrans_effort = BTM_ESCO_RETRANS_QUALITY; |
| } |
| else |
| { |
| resp.max_latency = 10; |
| resp.retrans_effort = BTM_ESCO_RETRANS_POWER; |
| } |
| resp.voice_contfmt = 0x60; |
| |
| if (p_data->link_type == BTM_LINK_TYPE_SCO) |
| { |
| resp.packet_types = (BTM_SCO_LINK_ONLY_MASK | |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 | |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5); |
| } |
| else /* Allow controller to use all types available except 5-slot EDR */ |
| { |
| resp.packet_types = (BTM_SCO_LINK_ALL_PKT_MASK | |
| BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | |
| BTM_SCO_PKT_TYPES_MASK_NO_3_EV5); |
| } |
| } |
| |
| /* tell sys to stop av if any */ |
| bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr); |
| |
| #if (BTM_WBS_INCLUDED == FALSE ) |
| /* Allow any platform specific pre-SCO set up to take place */ |
| bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, SCO_STATE_SETUP); |
| #else |
| /* When HS initiated SCO, it cannot be WBS. */ |
| /* Allow any platform specific pre-SCO set up to take place */ |
| bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, SCO_STATE_SETUP, |
| BTA_AG_CODEC_CVSD); |
| #endif |
| |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| pcm_sample_rate = BTA_DM_SCO_SAMP_RATE_8K; |
| |
| /* initialize SCO setup, no voice setting for AG, data rate <==> sample rate */ |
| BTM_ConfigScoPath(bta_dm_sco_co_init(pcm_sample_rate, pcm_sample_rate, &codec_info, p_scb->app_id), |
| bta_ag_sco_read_cback, NULL, TRUE); |
| #endif |
| } |
| else |
| hci_status = HCI_ERR_HOST_REJECT_DEVICE; |
| |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| /* If SCO open was initiated from HS, it must be CVSD */ |
| p_scb->inuse_codec = BTA_AG_CODEC_NONE; |
| #endif |
| |
| BTM_EScoConnRsp(p_data->sco_inx, hci_status, &resp); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_ci_sco_data |
| ** |
| ** Description Process the SCO data ready callin event |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_ci_sco_data(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data) |
| { |
| UNUSED(p_scb); |
| UNUSED(p_data); |
| |
| #if (BTM_SCO_HCI_INCLUDED == TRUE ) |
| bta_ag_sco_event(p_scb, BTA_AG_SCO_CI_DATA_E); |
| #endif |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_ag_set_esco_param |
| ** |
| ** Description Update esco parameters from script wrapper. |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_ag_set_esco_param(BOOLEAN set_reset, tBTM_ESCO_PARAMS *param) |
| { |
| if(set_reset == FALSE) /* reset the parameters to default */ |
| { |
| bta_ag_cb.sco.param_updated = FALSE; |
| APPL_TRACE_DEBUG("bta_ag_set_esco_param : Resetting ESCO parameters to default"); |
| } |
| else |
| { |
| bta_ag_cb.sco.param_updated = TRUE; |
| bta_ag_cb.sco.params = *param; |
| APPL_TRACE_DEBUG("bta_ag_set_esco_param : Setting ESCO parameters"); |
| } |
| } |
| |
| /******************************************************************************* |
| ** Debugging functions |
| *******************************************************************************/ |
| |
| #if BTA_AG_SCO_DEBUG == TRUE |
| static char *bta_ag_sco_evt_str(UINT8 event) |
| { |
| switch (event) |
| { |
| case BTA_AG_SCO_LISTEN_E: |
| return "Listen Request"; |
| case BTA_AG_SCO_OPEN_E: |
| return "Open Request"; |
| case BTA_AG_SCO_XFER_E: |
| return "Transfer Request"; |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| case BTA_AG_SCO_CN_DONE_E: |
| return "Codec Negotiation Done"; |
| case BTA_AG_SCO_REOPEN_E: |
| return "Reopen Request"; |
| #endif |
| case BTA_AG_SCO_CLOSE_E: |
| return "Close Request"; |
| case BTA_AG_SCO_SHUTDOWN_E: |
| return "Shutdown Request"; |
| case BTA_AG_SCO_CONN_OPEN_E: |
| return "Opened"; |
| case BTA_AG_SCO_CONN_CLOSE_E: |
| return "Closed"; |
| case BTA_AG_SCO_CI_DATA_E : |
| return "Sco Data"; |
| default: |
| return "Unknown SCO Event"; |
| } |
| } |
| |
| static char *bta_ag_sco_state_str(UINT8 state) |
| { |
| switch (state) |
| { |
| case BTA_AG_SCO_SHUTDOWN_ST: |
| return "Shutdown"; |
| case BTA_AG_SCO_LISTEN_ST: |
| return "Listening"; |
| #if (BTM_WBS_INCLUDED == TRUE ) |
| case BTA_AG_SCO_CODEC_ST: |
| return "Codec Negotiation"; |
| #endif |
| case BTA_AG_SCO_OPENING_ST: |
| return "Opening"; |
| case BTA_AG_SCO_OPEN_CL_ST: |
| return "Open while closing"; |
| case BTA_AG_SCO_OPEN_XFER_ST: |
| return "Opening while Transferring"; |
| case BTA_AG_SCO_OPEN_ST: |
| return "Open"; |
| case BTA_AG_SCO_CLOSING_ST: |
| return "Closing"; |
| case BTA_AG_SCO_CLOSE_OP_ST: |
| return "Close while Opening"; |
| case BTA_AG_SCO_CLOSE_XFER_ST: |
| return "Close while Transferring"; |
| case BTA_AG_SCO_SHUTTING_ST: |
| return "Shutting Down"; |
| default: |
| return "Unknown SCO State"; |
| } |
| } |
| |
| #endif |