| /****************************************************************************** |
| * |
| * Copyright (C) 2014 The Android Open Source Project |
| * Copyright 2003 - 2004 Open Interface North America, Inc. All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /******************************************************************************* |
| $Revision: #1 $ |
| ******************************************************************************/ |
| |
| #ifndef _OI_CODEC_SBC_CORE_H |
| #define _OI_CODEC_SBC_CORE_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| @file |
| Declarations of codec functions, data types, and macros. |
| |
| @ingroup codec_lib |
| */ |
| |
| /** |
| @addtogroup codec_lib |
| @{ |
| */ |
| |
| /* Non-BM3 users of of the codec must include oi_codec_sbc_bm3defs.h prior to |
| * including this file, or else these includes will fail because the BM3 SDK is |
| * not in the include path */ |
| #ifndef _OI_CODEC_SBC_BM3DEFS_H |
| #include "oi_stddefs.h" |
| #include "oi_status.h" |
| #endif |
| |
| #include <stdint.h> |
| |
| #define SBC_MAX_CHANNELS 2 |
| #define SBC_MAX_BANDS 8 |
| #define SBC_MAX_BLOCKS 16 |
| #define SBC_MIN_BITPOOL 2 /**< Minimum size of the bit allocation pool used to encode the stream */ |
| #define SBC_MAX_BITPOOL 250 /**< Maximum size of the bit allocation pool used to encode the stream */ |
| #define SBC_MAX_ONE_CHANNEL_BPS 320000 |
| #define SBC_MAX_TWO_CHANNEL_BPS 512000 |
| |
| |
| #define SBC_WBS_BITRATE 62000 |
| #define SBC_WBS_BITPOOL 27 |
| #define SBC_WBS_NROF_BLOCKS 16 |
| #define SBC_WBS_FRAME_LEN 62 |
| #define SBC_WBS_SAMPLES_PER_FRAME 128 |
| |
| |
| #define SBC_HEADER_LEN 4 |
| #define SBC_MAX_FRAME_LEN (SBC_HEADER_LEN + \ |
| ((SBC_MAX_BANDS * SBC_MAX_CHANNELS / 2) + \ |
| (SBC_MAX_BANDS + SBC_MAX_BLOCKS * SBC_MAX_BITPOOL + 7)/8)) |
| #define SBC_MAX_SAMPLES_PER_FRAME (SBC_MAX_BANDS * SBC_MAX_BLOCKS) |
| |
| #define SBC_MAX_SCALEFACTOR_BYTES ((4*(SBC_MAX_CHANNELS * SBC_MAX_BANDS) + 7)/8) |
| |
| #define OI_SBC_SYNCWORD 0x9c |
| #define OI_SBC_ENHANCED_SYNCWORD 0x9d |
| |
| /**@name Sampling frequencies */ |
| /**@{*/ |
| #define SBC_FREQ_16000 0 /**< The sampling frequency is 16 kHz. One possible value for the @a frequency parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_FREQ_32000 1 /**< The sampling frequency is 32 kHz. One possible value for the @a frequency parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_FREQ_44100 2 /**< The sampling frequency is 44.1 kHz. One possible value for the @a frequency parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_FREQ_48000 3 /**< The sampling frequency is 48 kHz. One possible value for the @a frequency parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| /**@}*/ |
| |
| /**@name Channel modes */ |
| /**@{*/ |
| #define SBC_MONO 0 /**< The mode of the encoded channel is mono. One possible value for the @a mode parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_DUAL_CHANNEL 1 /**< The mode of the encoded channel is dual-channel. One possible value for the @a mode parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_STEREO 2 /**< The mode of the encoded channel is stereo. One possible value for the @a mode parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_JOINT_STEREO 3 /**< The mode of the encoded channel is joint stereo. One possible value for the @a mode parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| /**@}*/ |
| |
| /**@name Subbands */ |
| /**@{*/ |
| #define SBC_SUBBANDS_4 0 /**< The encoded stream has 4 subbands. One possible value for the @a subbands parameter of OI_CODEC_SBC_EncoderConfigure()*/ |
| #define SBC_SUBBANDS_8 1 /**< The encoded stream has 8 subbands. One possible value for the @a subbands parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| /**@}*/ |
| |
| /**@name Block lengths */ |
| /**@{*/ |
| #define SBC_BLOCKS_4 0 /**< A block size of 4 blocks was used to encode the stream. One possible value for the @a blocks parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_BLOCKS_8 1 /**< A block size of 8 blocks was used to encode the stream is. One possible value for the @a blocks parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_BLOCKS_12 2 /**< A block size of 12 blocks was used to encode the stream. One possible value for the @a blocks parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_BLOCKS_16 3 /**< A block size of 16 blocks was used to encode the stream. One possible value for the @a blocks parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| /**@}*/ |
| |
| /**@name Bit allocation methods */ |
| /**@{*/ |
| #define SBC_LOUDNESS 0 /**< The bit allocation method. One possible value for the @a loudness parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| #define SBC_SNR 1 /**< The bit allocation method. One possible value for the @a loudness parameter of OI_CODEC_SBC_EncoderConfigure() */ |
| /**@}*/ |
| |
| /** |
| @} |
| |
| @addtogroup codec_internal |
| @{ |
| */ |
| |
| typedef int16_t SBC_BUFFER_T; |
| |
| |
| /** Used internally. */ |
| typedef struct { |
| uint16_t frequency; /**< The sampling frequency. Input parameter. */ |
| uint8_t freqIndex; |
| |
| uint8_t nrof_blocks; /**< The block size used to encode the stream. Input parameter. */ |
| uint8_t blocks; |
| |
| |
| uint8_t nrof_subbands; /**< The number of subbands of the encoded stream. Input parameter. */ |
| uint8_t subbands; |
| |
| uint8_t mode; /**< The mode of the encoded channel. Input parameter. */ |
| uint8_t nrof_channels; /**< The number of channels of the encoded stream. */ |
| |
| uint8_t alloc; /**< The bit allocation method. Input parameter. */ |
| uint8_t bitpool; /**< Size of the bit allocation pool used to encode the stream. Input parameter. */ |
| uint8_t crc; /**< Parity check byte used for error detection. */ |
| uint8_t join; /**< Whether joint stereo has been used. */ |
| uint8_t enhanced; |
| uint8_t min_bitpool; /**< This value is only used when encoding. SBC_MAX_BITPOOL if variable |
| bitpools are disallowed, otherwise the minimum bitpool size that will |
| be used by the bit allocator. */ |
| |
| uint8_t cachedInfo; /**< Information about the previous frame */ |
| } OI_CODEC_SBC_FRAME_INFO; |
| |
| /** Used internally. */ |
| typedef struct { |
| const OI_CHAR *codecInfo; |
| OI_CODEC_SBC_FRAME_INFO frameInfo; |
| int8_t scale_factor[SBC_MAX_CHANNELS*SBC_MAX_BANDS]; |
| uint32_t frameCount; |
| int32_t *subdata; |
| |
| SBC_BUFFER_T *filterBuffer[SBC_MAX_CHANNELS]; |
| int32_t filterBufferLen; |
| OI_UINT filterBufferOffset; |
| |
| union { |
| uint8_t uint8[SBC_MAX_CHANNELS*SBC_MAX_BANDS]; |
| uint32_t uint32[SBC_MAX_CHANNELS*SBC_MAX_BANDS/4]; |
| } bits; |
| uint8_t maxBitneed; /**< Running maximum bitneed */ |
| OI_BYTE formatByte; |
| uint8_t pcmStride; |
| uint8_t maxChannels; |
| } OI_CODEC_SBC_COMMON_CONTEXT; |
| |
| |
| /* |
| * A smaller value reduces RAM usage at the expense of increased CPU usage. Values in the range |
| * 27..50 are recommended, beyond 50 there is a diminishing return on reduced CPU usage. |
| */ |
| #define SBC_CODEC_MIN_FILTER_BUFFERS 16 |
| #define SBC_CODEC_FAST_FILTER_BUFFERS 27 |
| |
| /* Expands to the number of uint32_ts needed to ensure enough memory to encode |
| * or decode streams of numChannels channels, using numBuffers buffers. |
| * Example: |
| * uint32_t decoderData[CODEC_DATA_WORDS(SBC_MAX_CHANNELS, SBC_DECODER_FAST_SYNTHESIS_BUFFERS)]; |
| * */ |
| #define CODEC_DATA_WORDS(numChannels, numBuffers) \ |
| ((\ |
| (sizeof(int32_t) * SBC_MAX_BLOCKS * (numChannels) * SBC_MAX_BANDS) \ |
| + (sizeof(SBC_BUFFER_T) * SBC_MAX_CHANNELS * SBC_MAX_BANDS * (numBuffers)) \ |
| + (sizeof (uint32_t) - 1) \ |
| ) / sizeof(uint32_t)) |
| |
| /** Opaque parameter to decoding functions; maintains decoder context. */ |
| typedef struct { |
| OI_CODEC_SBC_COMMON_CONTEXT common; |
| uint8_t limitFrameFormat; /* Boolean, set by OI_CODEC_SBC_DecoderLimit() */ |
| uint8_t restrictSubbands; |
| uint8_t enhancedEnabled; |
| uint8_t bufferedBlocks; |
| } OI_CODEC_SBC_DECODER_CONTEXT; |
| |
| typedef struct { |
| uint32_t data[CODEC_DATA_WORDS(1, SBC_CODEC_FAST_FILTER_BUFFERS)]; |
| } OI_CODEC_SBC_CODEC_DATA_MONO; |
| |
| typedef struct { |
| uint32_t data[CODEC_DATA_WORDS(2, SBC_CODEC_FAST_FILTER_BUFFERS)]; |
| } OI_CODEC_SBC_CODEC_DATA_STEREO; |
| |
| /** |
| @} |
| |
| @addtogroup codec_lib |
| @{ |
| */ |
| |
| /** |
| * This function resets the decoder. The context must be reset when |
| * changing streams, or if the following stream parameters change: |
| * number of subbands, stereo mode, or frequency. |
| * |
| * @param context Pointer to the decoder context structure to be reset. |
| * |
| * @param enhanced If true, enhanced SBC operation is enabled. If enabled, |
| * the codec will recognize the alternative syncword for |
| * decoding an enhanced SBC stream. Enhancements should not |
| * be enabled unless the stream is known to be generated |
| * by an enhanced encoder, or there is a small possibility |
| * for decoding glitches if synchronization were to be lost. |
| */ |
| OI_STATUS OI_CODEC_SBC_DecoderReset(OI_CODEC_SBC_DECODER_CONTEXT *context, |
| uint32_t *decoderData, |
| uint32_t decoderDataBytes, |
| uint8_t maxChannels, |
| uint8_t pcmStride, |
| OI_BOOL enhanced); |
| |
| /** |
| * This function restricts the kind of SBC frames that the Decoder will |
| * process. Its use is optional. If used, it must be called after |
| * calling OI_CODEC_SBC_DecoderReset(). After it is called, any calls |
| * to OI_CODEC_SBC_DecodeFrame() with SBC frames that do not conform |
| * to the Subband and Enhanced SBC setting will be rejected with an |
| * OI_STATUS_INVALID_PARAMETERS return. |
| * |
| * @param context Pointer to the decoder context structure to be limited. |
| * |
| * @param enhanced If true, all frames passed to the decoder must be |
| * Enhanced SBC frames. If false, all frames must be |
| * standard SBC frames. |
| * |
| * @param subbands May be set to SBC_SUBBANDS_4 or SBC_SUBBANDS_8. All |
| * frames passed to the decoder must be encoded with |
| * the requested number of subbands. |
| * |
| */ |
| OI_STATUS OI_CODEC_SBC_DecoderLimit(OI_CODEC_SBC_DECODER_CONTEXT *context, |
| OI_BOOL enhanced, |
| uint8_t subbands); |
| |
| /** |
| * This function sets the decoder parameters for a raw decode where the decoder parameters are not |
| * available in the sbc data stream. OI_CODEC_SBC_DecoderReset must be called |
| * prior to calling this function. |
| * |
| * @param context Decoder context structure. This must be the context must be |
| * used each time a frame is decoded. |
| * |
| * @param enhanced Set to true to enable Qualcomm proprietary |
| * quality enhancements. |
| * |
| * @param frequency One of SBC_FREQ_16000, SBC_FREQ_32000, SBC_FREQ_44100, |
| * SBC_FREQ_48000 |
| * |
| * @param mode One of SBC_MONO, SBC_DUAL_CHANNEL, SBC_STEREO, |
| * SBC_JOINT_STEREO |
| * |
| * @param subbands One of SBC_SUBBANDS_4, SBC_SUBBANDS_8 |
| * |
| * @param blocks One of SBC_BLOCKS_4, SBC_BLOCKS_8, SBC_BLOCKS_12, |
| * SBC_BLOCKS_16 |
| * |
| * @param alloc One of SBC_LOUDNESS, SBC_SNR |
| * |
| * @param maxBitpool The maximum bitpool size for this context |
| */ |
| OI_STATUS OI_CODEC_SBC_DecoderConfigureRaw(OI_CODEC_SBC_DECODER_CONTEXT *context, |
| OI_BOOL enhanced, |
| uint8_t frequency, |
| uint8_t mode, |
| uint8_t subbands, |
| uint8_t blocks, |
| uint8_t alloc, |
| uint8_t maxBitpool); |
| |
| /** |
| * Decode one SBC frame. The frame has no header bytes. The context must have been previously |
| * initialized by calling OI_CODEC_SBC_DecoderConfigureRaw(). |
| * |
| * @param context Pointer to a decoder context structure. The same context |
| * must be used each time when decoding from the same stream. |
| * |
| * @param bitpool The actual bitpool size for this frame. Must be <= the maxbitpool specified |
| * in the call to OI_CODEC_SBC_DecoderConfigureRaw(), |
| * |
| * @param frameData Address of a pointer to the SBC data to decode. This |
| * value will be updated to point to the next frame after |
| * successful decoding. |
| * |
| * @param frameBytes Pointer to a uint32_t containing the number of available |
| * bytes of frame data. This value will be updated to reflect |
| * the number of bytes remaining after a decoding operation. |
| * |
| * @param pcmData Address of an array of int16_t pairs, which will be |
| * populated with the decoded audio data. This address |
| * is not updated. |
| * |
| * @param pcmBytes Pointer to a uint32_t in/out parameter. On input, it |
| * should contain the number of bytes available for pcm |
| * data. On output, it will contain the number of bytes |
| * written. Note that this differs from the semantics of |
| * frameBytes. |
| */ |
| OI_STATUS OI_CODEC_SBC_DecodeRaw(OI_CODEC_SBC_DECODER_CONTEXT *context, |
| uint8_t bitpool, |
| const OI_BYTE **frameData, |
| uint32_t *frameBytes, |
| int16_t *pcmData, |
| uint32_t *pcmBytes); |
| |
| /** |
| * Decode one SBC frame. |
| * |
| * @param context Pointer to a decoder context structure. The same context |
| * must be used each time when decoding from the same stream. |
| * |
| * @param frameData Address of a pointer to the SBC data to decode. This |
| * value will be updated to point to the next frame after |
| * successful decoding. |
| * |
| * @param frameBytes Pointer to a uint32_t containing the number of available |
| * bytes of frame data. This value will be updated to reflect |
| * the number of bytes remaining after a decoding operation. |
| * |
| * @param pcmData Address of an array of int16_t pairs, which will be |
| * populated with the decoded audio data. This address |
| * is not updated. |
| * |
| * @param pcmBytes Pointer to a uint32_t in/out parameter. On input, it |
| * should contain the number of bytes available for pcm |
| * data. On output, it will contain the number of bytes |
| * written. Note that this differs from the semantics of |
| * frameBytes. |
| */ |
| OI_STATUS OI_CODEC_SBC_DecodeFrame(OI_CODEC_SBC_DECODER_CONTEXT *context, |
| const OI_BYTE **frameData, |
| uint32_t *frameBytes, |
| int16_t *pcmData, |
| uint32_t *pcmBytes); |
| |
| /** |
| * Calculate the number of SBC frames but don't decode. CRC's are not checked, |
| * but the Sync word is found prior to count calculation. |
| * |
| * @param frameData Pointer to the SBC data. |
| * |
| * @param frameBytes Number of bytes avaiable in the frameData buffer |
| * |
| */ |
| uint8_t OI_CODEC_SBC_FrameCount(OI_BYTE *frameData, |
| uint32_t frameBytes); |
| |
| /** |
| * Analyze an SBC frame but don't do the decode. |
| * |
| * @param context Pointer to a decoder context structure. The same context |
| * must be used each time when decoding from the same stream. |
| * |
| * @param frameData Address of a pointer to the SBC data to decode. This |
| * value will be updated to point to the next frame after |
| * successful decoding. |
| * |
| * @param frameBytes Pointer to a uint32_t containing the number of available |
| * bytes of frame data. This value will be updated to reflect |
| * the number of bytes remaining after a decoding operation. |
| * |
| */ |
| OI_STATUS OI_CODEC_SBC_SkipFrame(OI_CODEC_SBC_DECODER_CONTEXT *context, |
| const OI_BYTE **frameData, |
| uint32_t *frameBytes); |
| |
| /* Common functions */ |
| |
| /** |
| Calculate the frame length. |
| |
| @param frame The frame whose length to calculate |
| |
| @return the length of an individual encoded frame in |
| bytes |
| */ |
| uint16_t OI_CODEC_SBC_CalculateFramelen(OI_CODEC_SBC_FRAME_INFO *frame); |
| |
| |
| /** |
| * Calculate the maximum bitpool size that fits within a given frame length. |
| * |
| * @param frame The frame to calculate the bitpool size for |
| * @param frameLen The frame length to fit the bitpool to |
| * |
| * @return the maximum bitpool that will fit in the specified frame length |
| */ |
| uint16_t OI_CODEC_SBC_CalculateBitpool(OI_CODEC_SBC_FRAME_INFO *frame, |
| uint16_t frameLen); |
| |
| /** |
| Calculate the bit rate. |
| |
| @param frame The frame whose bit rate to calculate |
| |
| @return the approximate bit rate in bits per second, |
| assuming that stream parameters are constant |
| */ |
| uint32_t OI_CODEC_SBC_CalculateBitrate(OI_CODEC_SBC_FRAME_INFO *frame); |
| |
| /** |
| Calculate decoded audio data length for one frame. |
| |
| @param frame The frame whose audio data length to calculate |
| |
| @return length of decoded audio data for a |
| single frame, in bytes |
| */ |
| uint16_t OI_CODEC_SBC_CalculatePcmBytes(OI_CODEC_SBC_COMMON_CONTEXT *common); |
| |
| /** |
| * Get the codec version text. |
| * |
| * @return pointer to text string containing codec version text |
| * |
| */ |
| OI_CHAR *OI_CODEC_Version(void); |
| |
| |
| /** |
| @} |
| |
| @addtogroup codec_internal |
| @{ |
| */ |
| |
| extern const OI_CHAR* const OI_CODEC_SBC_FreqText[]; |
| extern const OI_CHAR* const OI_CODEC_SBC_ModeText[]; |
| extern const OI_CHAR* const OI_CODEC_SBC_SubbandsText[]; |
| extern const OI_CHAR* const OI_CODEC_SBC_BlocksText[]; |
| extern const OI_CHAR* const OI_CODEC_SBC_AllocText[]; |
| |
| /** |
| @} |
| |
| @addtogroup codec_lib |
| @{ |
| */ |
| |
| #ifdef OI_DEBUG |
| void OI_CODEC_SBC_DumpConfig(OI_CODEC_SBC_FRAME_INFO *frameInfo); |
| #else |
| #define OI_CODEC_SBC_DumpConfig(f) |
| #endif |
| |
| /** |
| @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| |
| #endif /* _OI_CODEC_SBC_CORE_H */ |
| |
| |