| /* |
| * Copyright 2019 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "BTAudioHalStream" |
| |
| #include <android-base/logging.h> |
| #include <android-base/stringprintf.h> |
| #include <cutils/properties.h> |
| #include <errno.h> |
| #include <inttypes.h> |
| #include <log/log.h> |
| #include <string.h> |
| #include <time.h> |
| #include <unistd.h> |
| |
| #include "stream_apis.h" |
| #include "utils.h" |
| |
| using ::android::base::StringPrintf; |
| using ::android::bluetooth::audio::BluetoothAudioPortOut; |
| using ::android::bluetooth::audio::utils::GetAudioParamString; |
| using ::android::bluetooth::audio::utils::ParseAudioParams; |
| |
| namespace { |
| |
| constexpr unsigned int kMinimumDelayMs = 50; |
| constexpr unsigned int kMaximumDelayMs = 1000; |
| constexpr int kExtraAudioSyncMs = 200; |
| |
| std::ostream& operator<<(std::ostream& os, const audio_config& config) { |
| return os << "audio_config[sample_rate=" << config.sample_rate |
| << ", channels=" << StringPrintf("%#x", config.channel_mask) |
| << ", format=" << config.format << "]"; |
| } |
| |
| void out_calculate_feeding_delay_ms(const BluetoothStreamOut* out, |
| uint32_t* latency_ms, |
| uint64_t* frames = nullptr, |
| struct timespec* timestamp = nullptr) { |
| if (latency_ms == nullptr && frames == nullptr && timestamp == nullptr) { |
| return; |
| } |
| |
| // delay_report is the audio delay from the remote headset receiving data to |
| // the headset playing sound in units of nanoseconds |
| uint64_t delay_report_ns = 0; |
| uint64_t delay_report_ms = 0; |
| // absorbed_bytes is the total number of bytes sent by the Bluetooth stack to |
| // a remote headset |
| uint64_t absorbed_bytes = 0; |
| // absorbed_timestamp is the ... |
| struct timespec absorbed_timestamp = {}; |
| bool timestamp_fetched = false; |
| |
| std::unique_lock<std::mutex> lock(out->mutex_); |
| if (out->bluetooth_output_.GetPresentationPosition( |
| &delay_report_ns, &absorbed_bytes, &absorbed_timestamp)) { |
| delay_report_ms = delay_report_ns / 1000000; |
| // assume kMinimumDelayMs (50ms) < delay_report_ns < kMaximumDelayMs |
| // (1000ms), or it is invalid / ignored and use old delay calculated |
| // by ourselves. |
| if (delay_report_ms > kMinimumDelayMs && |
| delay_report_ms < kMaximumDelayMs) { |
| timestamp_fetched = true; |
| } else if (delay_report_ms >= kMaximumDelayMs) { |
| LOG(INFO) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", delay_report=" << delay_report_ns << "ns abnormal"; |
| } |
| } |
| if (!timestamp_fetched) { |
| // default to old delay if any failure is found when fetching from ports |
| // audio_a2dp_hw: |
| // frames_count = buffer_size / frame_size |
| // latency (sec.) = frames_count / samples_per_second (sample_rate) |
| // Sync from audio_a2dp_hw to add extra delay kExtraAudioSyncMs(+200ms) |
| delay_report_ms = |
| out->frames_count_ * 1000 / out->sample_rate_ + kExtraAudioSyncMs; |
| if (timestamp != nullptr) { |
| clock_gettime(CLOCK_MONOTONIC, &absorbed_timestamp); |
| } |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " uses the legacy delay " << delay_report_ms << " ms"; |
| } |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", delay=" << delay_report_ms << "ms, data=" << absorbed_bytes |
| << " bytes, timestamp=" << absorbed_timestamp.tv_sec << "." |
| << StringPrintf("%09ld", absorbed_timestamp.tv_nsec) << "s"; |
| |
| if (latency_ms != nullptr) { |
| *latency_ms = delay_report_ms; |
| } |
| if (frames != nullptr) { |
| const uint64_t latency_frames = delay_report_ms * out->sample_rate_ / 1000; |
| *frames = absorbed_bytes / audio_stream_out_frame_size(&out->stream_out_); |
| if (out->frames_presented_ < *frames) { |
| // Are we (the audio HAL) reset?! The stack counter is obsoleted. |
| *frames = out->frames_presented_; |
| } else if ((out->frames_presented_ - *frames) > latency_frames) { |
| // Is the Bluetooth output reset / restarted by AVDTP reconfig?! Its |
| // counter was reset but could not be used. |
| *frames = out->frames_presented_; |
| } |
| // suppose frames would be queued in the headset buffer for delay_report |
| // period, so those frames in buffers should not be included in the number |
| // of presented frames at the timestamp. |
| if (*frames > latency_frames) { |
| *frames -= latency_frames; |
| } else { |
| *frames = 0; |
| } |
| } |
| if (timestamp != nullptr) { |
| *timestamp = absorbed_timestamp; |
| } |
| } |
| |
| } // namespace |
| |
| std::ostream& operator<<(std::ostream& os, const BluetoothStreamState& state) { |
| switch (state) { |
| case BluetoothStreamState::DISABLED: |
| return os << "DISABLED"; |
| case BluetoothStreamState::STANDBY: |
| return os << "STANDBY"; |
| case BluetoothStreamState::STARTING: |
| return os << "STARTING"; |
| case BluetoothStreamState::STARTED: |
| return os << "STARTED"; |
| case BluetoothStreamState::SUSPENDING: |
| return os << "SUSPENDING"; |
| case BluetoothStreamState::UNKNOWN: |
| return os << "UNKNOWN"; |
| default: |
| return os << StringPrintf("%#hhx", state); |
| } |
| } |
| |
| static uint32_t out_get_sample_rate(const struct audio_stream* stream) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| audio_config_t audio_cfg; |
| if (out->bluetooth_output_.LoadAudioConfig(&audio_cfg)) { |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " audio_cfg=" << audio_cfg; |
| return audio_cfg.sample_rate; |
| } else { |
| LOG(WARNING) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", sample_rate=" << out->sample_rate_ << " failed"; |
| return out->sample_rate_; |
| } |
| } |
| |
| static int out_set_sample_rate(struct audio_stream* stream, uint32_t rate) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", sample_rate=" << out->sample_rate_; |
| return (rate == out->sample_rate_ ? 0 : -1); |
| } |
| |
| static size_t out_get_buffer_size(const struct audio_stream* stream) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| size_t buffer_size = |
| out->frames_count_ * audio_stream_out_frame_size(&out->stream_out_); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", buffer_size=" << buffer_size; |
| return buffer_size; |
| } |
| |
| static audio_channel_mask_t out_get_channels( |
| const struct audio_stream* stream) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| audio_config_t audio_cfg; |
| if (out->bluetooth_output_.LoadAudioConfig(&audio_cfg)) { |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " audio_cfg=" << audio_cfg; |
| return audio_cfg.channel_mask; |
| } else { |
| LOG(WARNING) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", channels=" << StringPrintf("%#x", out->channel_mask_) << " failure"; |
| return out->channel_mask_; |
| } |
| } |
| |
| static audio_format_t out_get_format(const struct audio_stream* stream) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| audio_config_t audio_cfg; |
| if (out->bluetooth_output_.LoadAudioConfig(&audio_cfg)) { |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " audio_cfg=" << audio_cfg; |
| return audio_cfg.format; |
| } else { |
| LOG(WARNING) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", format=" << out->format_ << " failure"; |
| return out->format_; |
| } |
| } |
| |
| static int out_set_format(struct audio_stream* stream, audio_format_t format) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", format=" << out->format_; |
| return (format == out->format_ ? 0 : -1); |
| } |
| |
| static int out_standby(struct audio_stream* stream) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| std::unique_lock<std::mutex> lock(out->mutex_); |
| int retval = 0; |
| |
| // out->last_write_time_us_ = 0; unnecessary as a stale write time has same |
| // effect |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " being standby (suspend)"; |
| if (out->bluetooth_output_.GetState() == BluetoothStreamState::STARTED) { |
| out->frames_rendered_ = 0; |
| retval = (out->bluetooth_output_.Suspend() ? 0 : -EIO); |
| } else if (out->bluetooth_output_.GetState() == |
| BluetoothStreamState::STARTING || |
| out->bluetooth_output_.GetState() == |
| BluetoothStreamState::SUSPENDING) { |
| LOG(WARNING) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " NOT ready to be standby"; |
| retval = -EBUSY; |
| } else { |
| LOG(DEBUG) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " standby already"; |
| } |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " standby (suspend) retval=" << retval; |
| |
| return retval; |
| } |
| |
| static int out_dump(const struct audio_stream* stream, int fd) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState(); |
| return 0; |
| } |
| |
| static int out_set_parameters(struct audio_stream* stream, |
| const char* kvpairs) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| std::unique_lock<std::mutex> lock(out->mutex_); |
| int retval = 0; |
| |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", kvpairs=[" << kvpairs << "]"; |
| |
| std::unordered_map<std::string, std::string> params = |
| ParseAudioParams(kvpairs); |
| if (params.empty()) return retval; |
| |
| LOG(VERBOSE) << __func__ << ": ParamsMap=[" << GetAudioParamString(params) |
| << "]"; |
| |
| audio_config_t audio_cfg; |
| if (params.find(AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES) != params.end() || |
| params.find(AUDIO_PARAMETER_STREAM_SUP_CHANNELS) != params.end() || |
| params.find(AUDIO_PARAMETER_STREAM_SUP_FORMATS) != params.end()) { |
| if (out->bluetooth_output_.LoadAudioConfig(&audio_cfg)) { |
| out->sample_rate_ = audio_cfg.sample_rate; |
| out->channel_mask_ = audio_cfg.channel_mask; |
| out->format_ = audio_cfg.format; |
| LOG(VERBOSE) << "state=" << out->bluetooth_output_.GetState() << ", sample_rate=" << out->sample_rate_ |
| << ", channels=" << StringPrintf("%#x", out->channel_mask_) << ", format=" << out->format_; |
| } else { |
| LOG(WARNING) << __func__ |
| << ": state=" << out->bluetooth_output_.GetState() |
| << " failed to get audio config"; |
| } |
| } |
| |
| if (params.find("routing") != params.end()) { |
| auto routing_param = params.find("routing"); |
| LOG(INFO) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", stream param '" << routing_param->first.c_str() << "=" |
| << routing_param->second.c_str() << "'"; |
| } |
| |
| if (params.find("A2dpSuspended") != params.end()) { |
| if (params["A2dpSuspended"] == "true") { |
| LOG(INFO) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " stream param stopped"; |
| if (out->bluetooth_output_.GetState() != BluetoothStreamState::DISABLED) { |
| out->frames_rendered_ = 0; |
| out->bluetooth_output_.Stop(); |
| } |
| } else { |
| LOG(INFO) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " stream param standby"; |
| if (out->bluetooth_output_.GetState() == BluetoothStreamState::DISABLED) { |
| out->bluetooth_output_.SetState(BluetoothStreamState::STANDBY); |
| } |
| } |
| } |
| |
| if (params.find("closing") != params.end()) { |
| if (params["closing"] == "true") { |
| LOG(INFO) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " stream param closing, disallow any writes?"; |
| if (out->bluetooth_output_.GetState() != BluetoothStreamState::DISABLED) { |
| out->frames_rendered_ = 0; |
| out->frames_presented_ = 0; |
| out->bluetooth_output_.Stop(); |
| } |
| } |
| } |
| |
| if (params.find("exiting") != params.end()) { |
| if (params["exiting"] == "1") { |
| LOG(INFO) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " stream param exiting"; |
| if (out->bluetooth_output_.GetState() != BluetoothStreamState::DISABLED) { |
| out->frames_rendered_ = 0; |
| out->frames_presented_ = 0; |
| out->bluetooth_output_.Stop(); |
| } |
| } |
| } |
| |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", kvpairs=[" << kvpairs << "], retval=" << retval; |
| return retval; |
| } |
| |
| static char* out_get_parameters(const struct audio_stream* stream, |
| const char* keys) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| std::unique_lock<std::mutex> lock(out->mutex_); |
| |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", keys=[" << keys << "]"; |
| |
| std::unordered_map<std::string, std::string> params = ParseAudioParams(keys); |
| if (params.empty()) return strdup(""); |
| |
| audio_config_t audio_cfg; |
| if (out->bluetooth_output_.LoadAudioConfig(&audio_cfg)) { |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " audio_cfg=" << audio_cfg; |
| } else { |
| LOG(ERROR) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " failed to get audio config"; |
| } |
| |
| std::unordered_map<std::string, std::string> return_params; |
| if (params.find(AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES) != params.end()) { |
| std::string param; |
| if (audio_cfg.sample_rate == 16000) { |
| param = "16000"; |
| } |
| if (audio_cfg.sample_rate == 24000) { |
| param = "24000"; |
| } |
| if (audio_cfg.sample_rate == 44100) { |
| param = "44100"; |
| } |
| if (audio_cfg.sample_rate == 48000) { |
| param = "48000"; |
| } |
| if (audio_cfg.sample_rate == 88200) { |
| param = "88200"; |
| } |
| if (audio_cfg.sample_rate == 96000) { |
| param = "96000"; |
| } |
| if (audio_cfg.sample_rate == 176400) { |
| param = "176400"; |
| } |
| if (audio_cfg.sample_rate == 192000) { |
| param = "192000"; |
| } |
| return_params[AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES] = param; |
| } |
| |
| if (params.find(AUDIO_PARAMETER_STREAM_SUP_CHANNELS) != params.end()) { |
| std::string param; |
| if (audio_cfg.channel_mask == AUDIO_CHANNEL_OUT_MONO) { |
| param = "AUDIO_CHANNEL_OUT_MONO"; |
| } |
| if (audio_cfg.channel_mask == AUDIO_CHANNEL_OUT_STEREO) { |
| param = "AUDIO_CHANNEL_OUT_STEREO"; |
| } |
| return_params[AUDIO_PARAMETER_STREAM_SUP_CHANNELS] = param; |
| } |
| |
| if (params.find(AUDIO_PARAMETER_STREAM_SUP_FORMATS) != params.end()) { |
| std::string param; |
| if (audio_cfg.format == AUDIO_FORMAT_PCM_16_BIT) { |
| param = "AUDIO_FORMAT_PCM_16_BIT"; |
| } |
| if (audio_cfg.format == AUDIO_FORMAT_PCM_24_BIT_PACKED) { |
| param = "AUDIO_FORMAT_PCM_24_BIT_PACKED"; |
| } |
| if (audio_cfg.format == AUDIO_FORMAT_PCM_32_BIT) { |
| param = "AUDIO_FORMAT_PCM_32_BIT"; |
| } |
| return_params[AUDIO_PARAMETER_STREAM_SUP_FORMATS] = param; |
| } |
| |
| std::string result; |
| for (const auto& ptr : return_params) { |
| result += ptr.first + "=" + ptr.second + ";"; |
| } |
| |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", result=[" << result << "]"; |
| return strdup(result.c_str()); |
| } |
| |
| static uint32_t out_get_latency_ms(const struct audio_stream_out* stream) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| uint32_t latency_ms = 0; |
| out_calculate_feeding_delay_ms(out, &latency_ms); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", latency=" << latency_ms << "ms"; |
| return latency_ms; |
| } |
| |
| static int out_set_volume(struct audio_stream_out* stream, float left, |
| float right) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", Left=" << left << ", Right=" << right; |
| return -1; |
| } |
| |
| static ssize_t out_write(struct audio_stream_out* stream, const void* buffer, |
| size_t bytes) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| std::unique_lock<std::mutex> lock(out->mutex_); |
| size_t totalWritten = 0; |
| |
| if (out->bluetooth_output_.GetState() != BluetoothStreamState::STARTED) { |
| LOG(INFO) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " first time bytes=" << bytes; |
| lock.unlock(); |
| if (stream->resume(stream)) { |
| LOG(ERROR) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " failed to resume"; |
| usleep(kBluetoothDefaultOutputBufferMs * 1000); |
| return totalWritten; |
| } |
| lock.lock(); |
| } |
| lock.unlock(); |
| totalWritten = out->bluetooth_output_.WriteData(buffer, bytes); |
| lock.lock(); |
| |
| struct timespec ts = {.tv_sec = 0, .tv_nsec = 0}; |
| clock_gettime(CLOCK_MONOTONIC, &ts); |
| if (totalWritten) { |
| const size_t frames = bytes / audio_stream_out_frame_size(stream); |
| out->frames_rendered_ += frames; |
| out->frames_presented_ += frames; |
| out->last_write_time_us_ = (ts.tv_sec * 1000000000LL + ts.tv_nsec) / 1000; |
| } else { |
| const int64_t now = (ts.tv_sec * 1000000000LL + ts.tv_nsec) / 1000; |
| const int64_t elapsed_time_since_last_write = |
| now - out->last_write_time_us_; |
| // frames_count = written_data / frame_size |
| // play_time (ms) = frames_count / (sample_rate (Sec.) / 1000000) |
| // sleep_time (ms) = play_time - elapsed_time |
| int64_t sleep_time = bytes * 1000000LL / |
| audio_stream_out_frame_size(stream) / |
| out_get_sample_rate(&stream->common) - |
| elapsed_time_since_last_write; |
| if (sleep_time > 0) { |
| LOG(VERBOSE) << __func__ << ": sleep " << (sleep_time / 1000) |
| << " ms when writting FMQ datapath"; |
| lock.unlock(); |
| usleep(sleep_time); |
| lock.lock(); |
| } else { |
| // we don't sleep when we exit standby (this is typical for a real alsa |
| // buffer). |
| sleep_time = 0; |
| } |
| out->last_write_time_us_ = now + sleep_time; |
| } |
| return totalWritten; |
| } |
| |
| static int out_get_render_position(const struct audio_stream_out* stream, |
| uint32_t* dsp_frames) { |
| if (dsp_frames == nullptr) return -EINVAL; |
| |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| // frames = (latency (ms) / 1000) * samples_per_second (sample_rate) |
| const uint64_t latency_frames = |
| (uint64_t)out_get_latency_ms(stream) * out->sample_rate_ / 1000; |
| if (out->frames_rendered_ >= latency_frames) { |
| *dsp_frames = (uint32_t)(out->frames_rendered_ - latency_frames); |
| } else { |
| *dsp_frames = 0; |
| } |
| |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", dsp_frames=" << *dsp_frames; |
| return 0; |
| } |
| |
| static int out_add_audio_effect(const struct audio_stream* stream, |
| effect_handle_t effect) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", effect=" << effect; |
| return 0; |
| } |
| |
| static int out_remove_audio_effect(const struct audio_stream* stream, |
| effect_handle_t effect) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", effect=" << effect; |
| return 0; |
| } |
| |
| static int out_get_next_write_timestamp(const struct audio_stream_out* stream, |
| int64_t* timestamp) { |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| *timestamp = 0; |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", timestamp=" << *timestamp; |
| return -EINVAL; |
| } |
| |
| static int out_pause(struct audio_stream_out* stream) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| std::unique_lock<std::mutex> lock(out->mutex_); |
| int retval = 0; |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", pausing (suspend)"; |
| if (out->bluetooth_output_.GetState() == BluetoothStreamState::STARTED) { |
| out->frames_rendered_ = 0; |
| retval = (out->bluetooth_output_.Suspend() ? 0 : -EIO); |
| } else if (out->bluetooth_output_.GetState() == |
| BluetoothStreamState::STARTING || |
| out->bluetooth_output_.GetState() == |
| BluetoothStreamState::SUSPENDING) { |
| LOG(WARNING) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " NOT ready to pause?!"; |
| retval = -EBUSY; |
| } else { |
| LOG(DEBUG) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " paused already"; |
| } |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", pausing (suspend) retval=" << retval; |
| |
| return retval; |
| } |
| |
| static int out_resume(struct audio_stream_out* stream) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| std::unique_lock<std::mutex> lock(out->mutex_); |
| int retval = 0; |
| |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", resuming (start)"; |
| if (out->bluetooth_output_.GetState() == BluetoothStreamState::STANDBY) { |
| retval = (out->bluetooth_output_.Start() ? 0 : -EIO); |
| } else if (out->bluetooth_output_.GetState() == |
| BluetoothStreamState::STARTING || |
| out->bluetooth_output_.GetState() == |
| BluetoothStreamState::SUSPENDING) { |
| LOG(WARNING) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " NOT ready to resume?!"; |
| retval = -EBUSY; |
| } else if (out->bluetooth_output_.GetState() == |
| BluetoothStreamState::DISABLED) { |
| LOG(WARNING) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " NOT allow to resume?!"; |
| retval = -EINVAL; |
| } else { |
| LOG(DEBUG) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " resumed already"; |
| } |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", resuming (start) retval=" << retval; |
| |
| return retval; |
| } |
| |
| static int out_get_presentation_position(const struct audio_stream_out* stream, |
| uint64_t* frames, |
| struct timespec* timestamp) { |
| if (frames == nullptr || timestamp == nullptr) { |
| return -EINVAL; |
| } |
| |
| const auto* out = reinterpret_cast<const BluetoothStreamOut*>(stream); |
| out_calculate_feeding_delay_ms(out, nullptr, frames, timestamp); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", frames=" << *frames << ", timestamp=" << timestamp->tv_sec |
| << "." << StringPrintf("%09ld", timestamp->tv_nsec) << "s"; |
| return 0; |
| } |
| |
| static void out_update_source_metadata( |
| struct audio_stream_out* stream, |
| const struct source_metadata* source_metadata) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| std::unique_lock<std::mutex> lock(out->mutex_); |
| if (source_metadata == nullptr || source_metadata->track_count == 0) { |
| return; |
| } |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", " << source_metadata->track_count << " track(s)"; |
| out->bluetooth_output_.UpdateMetadata(source_metadata); |
| } |
| |
| static size_t samples_per_ticks(size_t milliseconds, uint32_t sample_rate, |
| size_t channel_count) { |
| return milliseconds * sample_rate * channel_count / 1000; |
| } |
| |
| int adev_open_output_stream(struct audio_hw_device* dev, |
| audio_io_handle_t handle, audio_devices_t devices, |
| audio_output_flags_t flags, |
| struct audio_config* config, |
| struct audio_stream_out** stream_out, |
| const char* address __unused) { |
| *stream_out = nullptr; |
| auto* out = new BluetoothStreamOut; |
| if (!out->bluetooth_output_.SetUp(devices)) { |
| delete out; |
| return -EINVAL; |
| } |
| LOG(VERBOSE) << __func__ << ": device=" << StringPrintf("%#x", devices); |
| |
| out->stream_out_.common.get_sample_rate = out_get_sample_rate; |
| out->stream_out_.common.set_sample_rate = out_set_sample_rate; |
| out->stream_out_.common.get_buffer_size = out_get_buffer_size; |
| out->stream_out_.common.get_channels = out_get_channels; |
| out->stream_out_.common.get_format = out_get_format; |
| out->stream_out_.common.set_format = out_set_format; |
| out->stream_out_.common.standby = out_standby; |
| out->stream_out_.common.dump = out_dump; |
| out->stream_out_.common.set_parameters = out_set_parameters; |
| out->stream_out_.common.get_parameters = out_get_parameters; |
| out->stream_out_.common.add_audio_effect = out_add_audio_effect; |
| out->stream_out_.common.remove_audio_effect = out_remove_audio_effect; |
| out->stream_out_.get_latency = out_get_latency_ms; |
| out->stream_out_.set_volume = out_set_volume; |
| out->stream_out_.write = out_write; |
| out->stream_out_.get_render_position = out_get_render_position; |
| out->stream_out_.get_next_write_timestamp = out_get_next_write_timestamp; |
| out->stream_out_.pause = out_pause; |
| out->stream_out_.resume = out_resume; |
| out->stream_out_.get_presentation_position = out_get_presentation_position; |
| out->stream_out_.update_source_metadata = out_update_source_metadata; |
| |
| if (!out->bluetooth_output_.LoadAudioConfig(config)) { |
| LOG(ERROR) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << " failed to get audio config"; |
| } |
| // WAR to support Mono / 16 bits per sample as the Bluetooth stack required |
| if (config->channel_mask == AUDIO_CHANNEL_OUT_MONO && config->format == AUDIO_FORMAT_PCM_16_BIT) { |
| LOG(INFO) << __func__ << ": force channels=" << StringPrintf("%#x", out->channel_mask_) |
| << " to be AUDIO_CHANNEL_OUT_STEREO"; |
| out->bluetooth_output_.ForcePcmStereoToMono(true); |
| config->channel_mask = AUDIO_CHANNEL_OUT_STEREO; |
| } |
| out->sample_rate_ = config->sample_rate; |
| out->channel_mask_ = config->channel_mask; |
| out->format_ = config->format; |
| // frame is number of samples per channel |
| out->frames_count_ = |
| samples_per_ticks(kBluetoothDefaultOutputBufferMs, out->sample_rate_, 1); |
| out->frames_rendered_ = 0; |
| out->frames_presented_ = 0; |
| |
| *stream_out = &out->stream_out_; |
| LOG(INFO) << __func__ << ": state=" << out->bluetooth_output_.GetState() << ", sample_rate=" << out->sample_rate_ |
| << ", channels=" << StringPrintf("%#x", out->channel_mask_) << ", format=" << out->format_ |
| << ", frames=" << out->frames_count_; |
| return 0; |
| } |
| |
| void adev_close_output_stream(struct audio_hw_device* dev, |
| struct audio_stream_out* stream) { |
| auto* out = reinterpret_cast<BluetoothStreamOut*>(stream); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", stopping"; |
| if (out->bluetooth_output_.GetState() != BluetoothStreamState::DISABLED) { |
| out->frames_rendered_ = 0; |
| out->frames_presented_ = 0; |
| out->bluetooth_output_.Stop(); |
| } |
| out->bluetooth_output_.TearDown(); |
| LOG(VERBOSE) << __func__ << ": state=" << out->bluetooth_output_.GetState() |
| << ", stopped"; |
| delete out; |
| } |
| |
| size_t adev_get_input_buffer_size(const struct audio_hw_device* dev, |
| const struct audio_config* config) { |
| return 320; |
| } |
| |
| int adev_open_input_stream(struct audio_hw_device* dev, |
| audio_io_handle_t handle, audio_devices_t devices, |
| struct audio_config* config, |
| struct audio_stream_in** stream_in, |
| audio_input_flags_t flags __unused, |
| const char* address __unused, |
| audio_source_t source __unused) { |
| return -EINVAL; |
| } |
| |
| void adev_close_input_stream(struct audio_hw_device* dev, |
| struct audio_stream_in* stream_in) {} |