| /* http://frotznet.googlecode.com/svn/trunk/utils/fdevent.c |
| ** |
| ** Copyright 2006, Brian Swetland <swetland@frotz.net> |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| #include <sys/ioctl.h> |
| |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <errno.h> |
| |
| #include <fcntl.h> |
| |
| #include <stdarg.h> |
| #include <stddef.h> |
| |
| #include "adb_trace.h" |
| #include "fdevent.h" |
| #include "transport.h" |
| #include "sysdeps.h" |
| |
| #define TRACE_TAG TRACE_FDEVENT |
| |
| /* !!! Do not enable DEBUG for the adb that will run as the server: |
| ** both stdout and stderr are used to communicate between the client |
| ** and server. Any extra output will cause failures. |
| */ |
| #define DEBUG 0 /* non-0 will break adb server */ |
| |
| // This socket is used when a subproc shell service exists. |
| // It wakes up the fdevent_loop() and cause the correct handling |
| // of the shell's pseudo-tty master. I.e. force close it. |
| int SHELL_EXIT_NOTIFY_FD = -1; |
| |
| static void fatal(const char *fn, const char *fmt, ...) |
| { |
| va_list ap; |
| va_start(ap, fmt); |
| fprintf(stderr, "%s:", fn); |
| vfprintf(stderr, fmt, ap); |
| va_end(ap); |
| abort(); |
| } |
| |
| #define FATAL(x...) fatal(__FUNCTION__, x) |
| |
| #if DEBUG |
| static void dump_fde(fdevent *fde, const char *info) |
| { |
| adb_mutex_lock(&D_lock); |
| fprintf(stderr,"FDE #%03d %c%c%c %s\n", fde->fd, |
| fde->state & FDE_READ ? 'R' : ' ', |
| fde->state & FDE_WRITE ? 'W' : ' ', |
| fde->state & FDE_ERROR ? 'E' : ' ', |
| info); |
| adb_mutex_unlock(&D_lock); |
| } |
| #else |
| #define dump_fde(fde, info) do { } while(0) |
| #endif |
| |
| #define FDE_EVENTMASK 0x00ff |
| #define FDE_STATEMASK 0xff00 |
| |
| #define FDE_ACTIVE 0x0100 |
| #define FDE_PENDING 0x0200 |
| #define FDE_CREATED 0x0400 |
| |
| static void fdevent_plist_enqueue(fdevent *node); |
| static void fdevent_plist_remove(fdevent *node); |
| static fdevent *fdevent_plist_dequeue(void); |
| static void fdevent_subproc_event_func(int fd, unsigned events, void *userdata); |
| |
| static fdevent list_pending = { |
| .next = &list_pending, |
| .prev = &list_pending, |
| }; |
| |
| static fdevent **fd_table = 0; |
| static int fd_table_max = 0; |
| |
| #ifdef CRAPTASTIC |
| //HAVE_EPOLL |
| |
| #include <sys/epoll.h> |
| |
| static int epoll_fd = -1; |
| |
| static void fdevent_init() |
| { |
| /* XXX: what's a good size for the passed in hint? */ |
| epoll_fd = epoll_create(256); |
| |
| if(epoll_fd < 0) { |
| perror("epoll_create() failed"); |
| exit(1); |
| } |
| |
| /* mark for close-on-exec */ |
| fcntl(epoll_fd, F_SETFD, FD_CLOEXEC); |
| } |
| |
| static void fdevent_connect(fdevent *fde) |
| { |
| struct epoll_event ev; |
| |
| memset(&ev, 0, sizeof(ev)); |
| ev.events = 0; |
| ev.data.ptr = fde; |
| |
| #if 0 |
| if(epoll_ctl(epoll_fd, EPOLL_CTL_ADD, fde->fd, &ev)) { |
| perror("epoll_ctl() failed\n"); |
| exit(1); |
| } |
| #endif |
| } |
| |
| static void fdevent_disconnect(fdevent *fde) |
| { |
| struct epoll_event ev; |
| |
| memset(&ev, 0, sizeof(ev)); |
| ev.events = 0; |
| ev.data.ptr = fde; |
| |
| /* technically we only need to delete if we |
| ** were actively monitoring events, but let's |
| ** be aggressive and do it anyway, just in case |
| ** something's out of sync |
| */ |
| epoll_ctl(epoll_fd, EPOLL_CTL_DEL, fde->fd, &ev); |
| } |
| |
| static void fdevent_update(fdevent *fde, unsigned events) |
| { |
| struct epoll_event ev; |
| int active; |
| |
| active = (fde->state & FDE_EVENTMASK) != 0; |
| |
| memset(&ev, 0, sizeof(ev)); |
| ev.events = 0; |
| ev.data.ptr = fde; |
| |
| if(events & FDE_READ) ev.events |= EPOLLIN; |
| if(events & FDE_WRITE) ev.events |= EPOLLOUT; |
| if(events & FDE_ERROR) ev.events |= (EPOLLERR | EPOLLHUP); |
| |
| fde->state = (fde->state & FDE_STATEMASK) | events; |
| |
| if(active) { |
| /* we're already active. if we're changing to *no* |
| ** events being monitored, we need to delete, otherwise |
| ** we need to just modify |
| */ |
| if(ev.events) { |
| if(epoll_ctl(epoll_fd, EPOLL_CTL_MOD, fde->fd, &ev)) { |
| perror("epoll_ctl() failed\n"); |
| exit(1); |
| } |
| } else { |
| if(epoll_ctl(epoll_fd, EPOLL_CTL_DEL, fde->fd, &ev)) { |
| perror("epoll_ctl() failed\n"); |
| exit(1); |
| } |
| } |
| } else { |
| /* we're not active. if we're watching events, we need |
| ** to add, otherwise we can just do nothing |
| */ |
| if(ev.events) { |
| if(epoll_ctl(epoll_fd, EPOLL_CTL_ADD, fde->fd, &ev)) { |
| perror("epoll_ctl() failed\n"); |
| exit(1); |
| } |
| } |
| } |
| } |
| |
| static void fdevent_process() |
| { |
| struct epoll_event events[256]; |
| fdevent *fde; |
| int i, n; |
| |
| n = epoll_wait(epoll_fd, events, 256, -1); |
| |
| if(n < 0) { |
| if(errno == EINTR) return; |
| perror("epoll_wait"); |
| exit(1); |
| } |
| |
| for(i = 0; i < n; i++) { |
| struct epoll_event *ev = events + i; |
| fde = ev->data.ptr; |
| |
| if(ev->events & EPOLLIN) { |
| fde->events |= FDE_READ; |
| } |
| if(ev->events & EPOLLOUT) { |
| fde->events |= FDE_WRITE; |
| } |
| if(ev->events & (EPOLLERR | EPOLLHUP)) { |
| fde->events |= FDE_ERROR; |
| } |
| if(fde->events) { |
| if(fde->state & FDE_PENDING) continue; |
| fde->state |= FDE_PENDING; |
| fdevent_plist_enqueue(fde); |
| } |
| } |
| } |
| |
| #else /* USE_SELECT */ |
| |
| #ifdef HAVE_WINSOCK |
| #include <winsock2.h> |
| #else |
| #include <sys/select.h> |
| #endif |
| |
| static fd_set read_fds; |
| static fd_set write_fds; |
| static fd_set error_fds; |
| |
| static int select_n = 0; |
| |
| static void fdevent_init(void) |
| { |
| FD_ZERO(&read_fds); |
| FD_ZERO(&write_fds); |
| FD_ZERO(&error_fds); |
| } |
| |
| static void fdevent_connect(fdevent *fde) |
| { |
| if(fde->fd >= select_n) { |
| select_n = fde->fd + 1; |
| } |
| } |
| |
| static void fdevent_disconnect(fdevent *fde) |
| { |
| int i, n; |
| |
| FD_CLR(fde->fd, &read_fds); |
| FD_CLR(fde->fd, &write_fds); |
| FD_CLR(fde->fd, &error_fds); |
| |
| for(n = 0, i = 0; i < select_n; i++) { |
| if(fd_table[i] != 0) n = i; |
| } |
| select_n = n + 1; |
| } |
| |
| static void fdevent_update(fdevent *fde, unsigned events) |
| { |
| if(events & FDE_READ) { |
| FD_SET(fde->fd, &read_fds); |
| } else { |
| FD_CLR(fde->fd, &read_fds); |
| } |
| if(events & FDE_WRITE) { |
| FD_SET(fde->fd, &write_fds); |
| } else { |
| FD_CLR(fde->fd, &write_fds); |
| } |
| if(events & FDE_ERROR) { |
| FD_SET(fde->fd, &error_fds); |
| } else { |
| FD_CLR(fde->fd, &error_fds); |
| } |
| |
| fde->state = (fde->state & FDE_STATEMASK) | events; |
| } |
| |
| /* Looks at fd_table[] for bad FDs and sets bit in fds. |
| ** Returns the number of bad FDs. |
| */ |
| static int fdevent_fd_check(fd_set *fds) |
| { |
| int i, n = 0; |
| fdevent *fde; |
| |
| for(i = 0; i < select_n; i++) { |
| fde = fd_table[i]; |
| if(fde == 0) continue; |
| if(fcntl(i, F_GETFL, NULL) < 0) { |
| FD_SET(i, fds); |
| n++; |
| // fde->state |= FDE_DONT_CLOSE; |
| |
| } |
| } |
| return n; |
| } |
| |
| #if !DEBUG |
| static inline void dump_all_fds(const char *extra_msg) {} |
| #else |
| static void dump_all_fds(const char *extra_msg) |
| { |
| int i; |
| fdevent *fde; |
| // per fd: 4 digits (but really: log10(FD_SETSIZE)), 1 staus, 1 blank |
| char msg_buff[FD_SETSIZE*6 + 1], *pb=msg_buff; |
| size_t max_chars = FD_SETSIZE * 6 + 1; |
| int printed_out; |
| #define SAFE_SPRINTF(...) \ |
| do { \ |
| printed_out = snprintf(pb, max_chars, __VA_ARGS__); \ |
| if (printed_out <= 0) { \ |
| D("... snprintf failed.\n"); \ |
| return; \ |
| } \ |
| if (max_chars < (unsigned int)printed_out) { \ |
| D("... snprintf out of space.\n"); \ |
| return; \ |
| } \ |
| pb += printed_out; \ |
| max_chars -= printed_out; \ |
| } while(0) |
| |
| for(i = 0; i < select_n; i++) { |
| fde = fd_table[i]; |
| SAFE_SPRINTF("%d", i); |
| if(fde == 0) { |
| SAFE_SPRINTF("? "); |
| continue; |
| } |
| if(fcntl(i, F_GETFL, NULL) < 0) { |
| SAFE_SPRINTF("b"); |
| } |
| SAFE_SPRINTF(" "); |
| } |
| D("%s fd_table[]->fd = {%s}\n", extra_msg, msg_buff); |
| } |
| #endif |
| |
| static void fdevent_process() |
| { |
| int i, n; |
| fdevent *fde; |
| unsigned events; |
| fd_set rfd, wfd, efd; |
| |
| memcpy(&rfd, &read_fds, sizeof(fd_set)); |
| memcpy(&wfd, &write_fds, sizeof(fd_set)); |
| memcpy(&efd, &error_fds, sizeof(fd_set)); |
| |
| dump_all_fds("pre select()"); |
| |
| n = select(select_n, &rfd, &wfd, &efd, NULL); |
| int saved_errno = errno; |
| D("select() returned n=%d, errno=%d\n", n, n<0?saved_errno:0); |
| |
| dump_all_fds("post select()"); |
| |
| if(n < 0) { |
| switch(saved_errno) { |
| case EINTR: return; |
| case EBADF: |
| // Can't trust the FD sets after an error. |
| FD_ZERO(&wfd); |
| FD_ZERO(&efd); |
| FD_ZERO(&rfd); |
| break; |
| default: |
| D("Unexpected select() error=%d\n", saved_errno); |
| return; |
| } |
| } |
| if(n <= 0) { |
| // We fake a read, as the rest of the code assumes |
| // that errors will be detected at that point. |
| n = fdevent_fd_check(&rfd); |
| } |
| |
| for(i = 0; (i < select_n) && (n > 0); i++) { |
| events = 0; |
| if(FD_ISSET(i, &rfd)) { events |= FDE_READ; n--; } |
| if(FD_ISSET(i, &wfd)) { events |= FDE_WRITE; n--; } |
| if(FD_ISSET(i, &efd)) { events |= FDE_ERROR; n--; } |
| |
| if(events) { |
| fde = fd_table[i]; |
| if(fde == 0) |
| FATAL("missing fde for fd %d\n", i); |
| |
| fde->events |= events; |
| |
| D("got events fde->fd=%d events=%04x, state=%04x\n", |
| fde->fd, fde->events, fde->state); |
| if(fde->state & FDE_PENDING) continue; |
| fde->state |= FDE_PENDING; |
| fdevent_plist_enqueue(fde); |
| } |
| } |
| } |
| |
| #endif |
| |
| static void fdevent_register(fdevent *fde) |
| { |
| if(fde->fd < 0) { |
| FATAL("bogus negative fd (%d)\n", fde->fd); |
| } |
| |
| if(fde->fd >= fd_table_max) { |
| int oldmax = fd_table_max; |
| if(fde->fd > 32000) { |
| FATAL("bogus huuuuge fd (%d)\n", fde->fd); |
| } |
| if(fd_table_max == 0) { |
| fdevent_init(); |
| fd_table_max = 256; |
| } |
| while(fd_table_max <= fde->fd) { |
| fd_table_max *= 2; |
| } |
| fd_table = realloc(fd_table, sizeof(fdevent*) * fd_table_max); |
| if(fd_table == 0) { |
| FATAL("could not expand fd_table to %d entries\n", fd_table_max); |
| } |
| memset(fd_table + oldmax, 0, sizeof(int) * (fd_table_max - oldmax)); |
| } |
| |
| fd_table[fde->fd] = fde; |
| } |
| |
| static void fdevent_unregister(fdevent *fde) |
| { |
| if((fde->fd < 0) || (fde->fd >= fd_table_max)) { |
| FATAL("fd out of range (%d)\n", fde->fd); |
| } |
| |
| if(fd_table[fde->fd] != fde) { |
| FATAL("fd_table out of sync [%d]\n", fde->fd); |
| } |
| |
| fd_table[fde->fd] = 0; |
| |
| if(!(fde->state & FDE_DONT_CLOSE)) { |
| dump_fde(fde, "close"); |
| adb_close(fde->fd); |
| } |
| } |
| |
| static void fdevent_plist_enqueue(fdevent *node) |
| { |
| fdevent *list = &list_pending; |
| |
| node->next = list; |
| node->prev = list->prev; |
| node->prev->next = node; |
| list->prev = node; |
| } |
| |
| static void fdevent_plist_remove(fdevent *node) |
| { |
| node->prev->next = node->next; |
| node->next->prev = node->prev; |
| node->next = 0; |
| node->prev = 0; |
| } |
| |
| static fdevent *fdevent_plist_dequeue(void) |
| { |
| fdevent *list = &list_pending; |
| fdevent *node = list->next; |
| |
| if(node == list) return 0; |
| |
| list->next = node->next; |
| list->next->prev = list; |
| node->next = 0; |
| node->prev = 0; |
| |
| return node; |
| } |
| |
| static void fdevent_call_fdfunc(fdevent* fde) |
| { |
| unsigned events = fde->events; |
| fde->events = 0; |
| if(!(fde->state & FDE_PENDING)) return; |
| fde->state &= (~FDE_PENDING); |
| dump_fde(fde, "callback"); |
| fde->func(fde->fd, events, fde->arg); |
| } |
| |
| static void fdevent_subproc_event_func(int fd, unsigned ev, void *userdata) |
| { |
| |
| D("subproc handling on fd=%d ev=%04x\n", fd, ev); |
| |
| // Hook oneself back into the fde's suitable for select() on read. |
| if((fd < 0) || (fd >= fd_table_max)) { |
| FATAL("fd %d out of range for fd_table \n", fd); |
| } |
| fdevent *fde = fd_table[fd]; |
| fdevent_add(fde, FDE_READ); |
| |
| if(ev & FDE_READ){ |
| int subproc_fd; |
| |
| if(readx(fd, &subproc_fd, sizeof(subproc_fd))) { |
| FATAL("Failed to read the subproc's fd from fd=%d\n", fd); |
| } |
| if((subproc_fd < 0) || (subproc_fd >= fd_table_max)) { |
| D("subproc_fd %d out of range 0, fd_table_max=%d\n", |
| subproc_fd, fd_table_max); |
| return; |
| } |
| fdevent *subproc_fde = fd_table[subproc_fd]; |
| if(!subproc_fde) { |
| D("subproc_fd %d cleared from fd_table\n", subproc_fd); |
| return; |
| } |
| if(subproc_fde->fd != subproc_fd) { |
| // Already reallocated? |
| D("subproc_fd %d != fd_table[].fd %d\n", subproc_fd, subproc_fde->fd); |
| return; |
| } |
| |
| subproc_fde->force_eof = 1; |
| |
| int rcount = 0; |
| ioctl(subproc_fd, FIONREAD, &rcount); |
| D("subproc with fd=%d has rcount=%d err=%d\n", |
| subproc_fd, rcount, errno); |
| |
| if(rcount) { |
| // If there is data left, it will show up in the select(). |
| // This works because there is no other thread reading that |
| // data when in this fd_func(). |
| return; |
| } |
| |
| D("subproc_fde.state=%04x\n", subproc_fde->state); |
| subproc_fde->events |= FDE_READ; |
| if(subproc_fde->state & FDE_PENDING) { |
| return; |
| } |
| subproc_fde->state |= FDE_PENDING; |
| fdevent_call_fdfunc(subproc_fde); |
| } |
| } |
| |
| fdevent *fdevent_create(int fd, fd_func func, void *arg) |
| { |
| fdevent *fde = (fdevent*) malloc(sizeof(fdevent)); |
| if(fde == 0) return 0; |
| fdevent_install(fde, fd, func, arg); |
| fde->state |= FDE_CREATED; |
| return fde; |
| } |
| |
| void fdevent_destroy(fdevent *fde) |
| { |
| if(fde == 0) return; |
| if(!(fde->state & FDE_CREATED)) { |
| FATAL("fde %p not created by fdevent_create()\n", fde); |
| } |
| fdevent_remove(fde); |
| } |
| |
| void fdevent_install(fdevent *fde, int fd, fd_func func, void *arg) |
| { |
| memset(fde, 0, sizeof(fdevent)); |
| fde->state = FDE_ACTIVE; |
| fde->fd = fd; |
| fde->force_eof = 0; |
| fde->func = func; |
| fde->arg = arg; |
| |
| #ifndef HAVE_WINSOCK |
| fcntl(fd, F_SETFL, O_NONBLOCK); |
| #endif |
| fdevent_register(fde); |
| dump_fde(fde, "connect"); |
| fdevent_connect(fde); |
| fde->state |= FDE_ACTIVE; |
| } |
| |
| void fdevent_remove(fdevent *fde) |
| { |
| if(fde->state & FDE_PENDING) { |
| fdevent_plist_remove(fde); |
| } |
| |
| if(fde->state & FDE_ACTIVE) { |
| fdevent_disconnect(fde); |
| dump_fde(fde, "disconnect"); |
| fdevent_unregister(fde); |
| } |
| |
| fde->state = 0; |
| fde->events = 0; |
| } |
| |
| |
| void fdevent_set(fdevent *fde, unsigned events) |
| { |
| events &= FDE_EVENTMASK; |
| |
| if((fde->state & FDE_EVENTMASK) == events) return; |
| |
| if(fde->state & FDE_ACTIVE) { |
| fdevent_update(fde, events); |
| dump_fde(fde, "update"); |
| } |
| |
| fde->state = (fde->state & FDE_STATEMASK) | events; |
| |
| if(fde->state & FDE_PENDING) { |
| /* if we're pending, make sure |
| ** we don't signal an event that |
| ** is no longer wanted. |
| */ |
| fde->events &= (~events); |
| if(fde->events == 0) { |
| fdevent_plist_remove(fde); |
| fde->state &= (~FDE_PENDING); |
| } |
| } |
| } |
| |
| void fdevent_add(fdevent *fde, unsigned events) |
| { |
| fdevent_set( |
| fde, (fde->state & FDE_EVENTMASK) | (events & FDE_EVENTMASK)); |
| } |
| |
| void fdevent_del(fdevent *fde, unsigned events) |
| { |
| fdevent_set( |
| fde, (fde->state & FDE_EVENTMASK) & (~(events & FDE_EVENTMASK))); |
| } |
| |
| void fdevent_subproc_setup() |
| { |
| int s[2]; |
| |
| if(adb_socketpair(s)) { |
| FATAL("cannot create shell-exit socket-pair\n"); |
| } |
| D("socketpair: (%d,%d)", s[0], s[1]); |
| |
| SHELL_EXIT_NOTIFY_FD = s[0]; |
| fdevent *fde; |
| fde = fdevent_create(s[1], fdevent_subproc_event_func, NULL); |
| if(!fde) |
| FATAL("cannot create fdevent for shell-exit handler\n"); |
| fdevent_add(fde, FDE_READ); |
| } |
| |
| void fdevent_loop() |
| { |
| fdevent *fde; |
| fdevent_subproc_setup(); |
| |
| for(;;) { |
| D("--- ---- waiting for events\n"); |
| |
| fdevent_process(); |
| |
| while((fde = fdevent_plist_dequeue())) { |
| fdevent_call_fdfunc(fde); |
| } |
| } |
| } |