| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef _LIBS_CUTILS_TRACE_H |
| #define _LIBS_CUTILS_TRACE_H |
| |
| #include <inttypes.h> |
| #include <stdatomic.h> |
| #include <stdbool.h> |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <sys/cdefs.h> |
| #include <sys/types.h> |
| #include <unistd.h> |
| |
| #include <cutils/compiler.h> |
| |
| __BEGIN_DECLS |
| |
| /** |
| * The ATRACE_TAG macro can be defined before including this header to trace |
| * using one of the tags defined below. It must be defined to one of the |
| * following ATRACE_TAG_* macros. The trace tag is used to filter tracing in |
| * userland to avoid some of the runtime cost of tracing when it is not desired. |
| * |
| * Defining ATRACE_TAG to be ATRACE_TAG_ALWAYS will result in the tracing always |
| * being enabled - this should ONLY be done for debug code, as userland tracing |
| * has a performance cost even when the trace is not being recorded. Defining |
| * ATRACE_TAG to be ATRACE_TAG_NEVER or leaving ATRACE_TAG undefined will result |
| * in the tracing always being disabled. |
| * |
| * ATRACE_TAG_HAL should be bitwise ORed with the relevant tags for tracing |
| * within a hardware module. For example a camera hardware module would set: |
| * #define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL) |
| * |
| * Keep these in sync with frameworks/base/core/java/android/os/Trace.java. |
| */ |
| #define ATRACE_TAG_NEVER 0 // This tag is never enabled. |
| #define ATRACE_TAG_ALWAYS (1<<0) // This tag is always enabled. |
| #define ATRACE_TAG_GRAPHICS (1<<1) |
| #define ATRACE_TAG_INPUT (1<<2) |
| #define ATRACE_TAG_VIEW (1<<3) |
| #define ATRACE_TAG_WEBVIEW (1<<4) |
| #define ATRACE_TAG_WINDOW_MANAGER (1<<5) |
| #define ATRACE_TAG_ACTIVITY_MANAGER (1<<6) |
| #define ATRACE_TAG_SYNC_MANAGER (1<<7) |
| #define ATRACE_TAG_AUDIO (1<<8) |
| #define ATRACE_TAG_VIDEO (1<<9) |
| #define ATRACE_TAG_CAMERA (1<<10) |
| #define ATRACE_TAG_HAL (1<<11) |
| #define ATRACE_TAG_APP (1<<12) |
| #define ATRACE_TAG_RESOURCES (1<<13) |
| #define ATRACE_TAG_DALVIK (1<<14) |
| #define ATRACE_TAG_RS (1<<15) |
| #define ATRACE_TAG_BIONIC (1<<16) |
| #define ATRACE_TAG_POWER (1<<17) |
| #define ATRACE_TAG_PACKAGE_MANAGER (1<<18) |
| #define ATRACE_TAG_SYSTEM_SERVER (1<<19) |
| #define ATRACE_TAG_DATABASE (1<<20) |
| #define ATRACE_TAG_NETWORK (1<<21) |
| #define ATRACE_TAG_LAST ATRACE_TAG_NETWORK |
| |
| // Reserved for initialization. |
| #define ATRACE_TAG_NOT_READY (1ULL<<63) |
| |
| #define ATRACE_TAG_VALID_MASK ((ATRACE_TAG_LAST - 1) | ATRACE_TAG_LAST) |
| |
| #ifndef ATRACE_TAG |
| #define ATRACE_TAG ATRACE_TAG_NEVER |
| #elif ATRACE_TAG > ATRACE_TAG_VALID_MASK |
| #error ATRACE_TAG must be defined to be one of the tags defined in cutils/trace.h |
| #endif |
| |
| /** |
| * Opens the trace file for writing and reads the property for initial tags. |
| * The atrace.tags.enableflags property sets the tags to trace. |
| * This function should not be explicitly called, the first call to any normal |
| * trace function will cause it to be run safely. |
| */ |
| void atrace_setup(); |
| |
| /** |
| * If tracing is ready, set atrace_enabled_tags to the system property |
| * debug.atrace.tags.enableflags. Can be used as a sysprop change callback. |
| */ |
| void atrace_update_tags(); |
| |
| /** |
| * Set whether the process is debuggable. By default the process is not |
| * considered debuggable. If the process is not debuggable then application- |
| * level tracing is not allowed unless the ro.debuggable system property is |
| * set to '1'. |
| */ |
| void atrace_set_debuggable(bool debuggable); |
| |
| /** |
| * Set whether tracing is enabled for the current process. This is used to |
| * prevent tracing within the Zygote process. |
| */ |
| void atrace_set_tracing_enabled(bool enabled); |
| |
| /** |
| * Flag indicating whether setup has been completed, initialized to 0. |
| * Nonzero indicates setup has completed. |
| * Note: This does NOT indicate whether or not setup was successful. |
| */ |
| extern atomic_bool atrace_is_ready; |
| |
| /** |
| * Set of ATRACE_TAG flags to trace for, initialized to ATRACE_TAG_NOT_READY. |
| * A value of zero indicates setup has failed. |
| * Any other nonzero value indicates setup has succeeded, and tracing is on. |
| */ |
| extern uint64_t atrace_enabled_tags; |
| |
| /** |
| * Handle to the kernel's trace buffer, initialized to -1. |
| * Any other value indicates setup has succeeded, and is a valid fd for tracing. |
| */ |
| extern int atrace_marker_fd; |
| |
| /** |
| * atrace_init readies the process for tracing by opening the trace_marker file. |
| * Calling any trace function causes this to be run, so calling it is optional. |
| * This can be explicitly run to avoid setup delay on first trace function. |
| */ |
| #define ATRACE_INIT() atrace_init() |
| static inline void atrace_init() |
| { |
| if (CC_UNLIKELY(!atomic_load_explicit(&atrace_is_ready, memory_order_acquire))) { |
| atrace_setup(); |
| } |
| } |
| |
| /** |
| * Get the mask of all tags currently enabled. |
| * It can be used as a guard condition around more expensive trace calculations. |
| * Every trace function calls this, which ensures atrace_init is run. |
| */ |
| #define ATRACE_GET_ENABLED_TAGS() atrace_get_enabled_tags() |
| static inline uint64_t atrace_get_enabled_tags() |
| { |
| atrace_init(); |
| return atrace_enabled_tags; |
| } |
| |
| /** |
| * Test if a given tag is currently enabled. |
| * Returns nonzero if the tag is enabled, otherwise zero. |
| * It can be used as a guard condition around more expensive trace calculations. |
| */ |
| #define ATRACE_ENABLED() atrace_is_tag_enabled(ATRACE_TAG) |
| static inline uint64_t atrace_is_tag_enabled(uint64_t tag) |
| { |
| return atrace_get_enabled_tags() & tag; |
| } |
| |
| /** |
| * Trace the beginning of a context. name is used to identify the context. |
| * This is often used to time function execution. |
| */ |
| #define ATRACE_BEGIN(name) atrace_begin(ATRACE_TAG, name) |
| static inline void atrace_begin(uint64_t tag, const char* name) |
| { |
| if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { |
| void atrace_begin_body(const char*); |
| atrace_begin_body(name); |
| } |
| } |
| |
| /** |
| * Trace the end of a context. |
| * This should match up (and occur after) a corresponding ATRACE_BEGIN. |
| */ |
| #define ATRACE_END() atrace_end(ATRACE_TAG) |
| static inline void atrace_end(uint64_t tag) |
| { |
| if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { |
| void atrace_end_body(); |
| atrace_end_body(); |
| } |
| } |
| |
| /** |
| * Trace the beginning of an asynchronous event. Unlike ATRACE_BEGIN/ATRACE_END |
| * contexts, asynchronous events do not need to be nested. The name describes |
| * the event, and the cookie provides a unique identifier for distinguishing |
| * simultaneous events. The name and cookie used to begin an event must be |
| * used to end it. |
| */ |
| #define ATRACE_ASYNC_BEGIN(name, cookie) \ |
| atrace_async_begin(ATRACE_TAG, name, cookie) |
| static inline void atrace_async_begin(uint64_t tag, const char* name, |
| int32_t cookie) |
| { |
| if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { |
| void atrace_async_begin_body(const char*, int32_t); |
| atrace_async_begin_body(name, cookie); |
| } |
| } |
| |
| /** |
| * Trace the end of an asynchronous event. |
| * This should have a corresponding ATRACE_ASYNC_BEGIN. |
| */ |
| #define ATRACE_ASYNC_END(name, cookie) atrace_async_end(ATRACE_TAG, name, cookie) |
| static inline void atrace_async_end(uint64_t tag, const char* name, int32_t cookie) |
| { |
| if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { |
| void atrace_async_end_body(const char*, int32_t); |
| atrace_async_end_body(name, cookie); |
| } |
| } |
| |
| /** |
| * Traces an integer counter value. name is used to identify the counter. |
| * This can be used to track how a value changes over time. |
| */ |
| #define ATRACE_INT(name, value) atrace_int(ATRACE_TAG, name, value) |
| static inline void atrace_int(uint64_t tag, const char* name, int32_t value) |
| { |
| if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { |
| void atrace_int_body(const char*, int32_t); |
| atrace_int_body(name, value); |
| } |
| } |
| |
| /** |
| * Traces a 64-bit integer counter value. name is used to identify the |
| * counter. This can be used to track how a value changes over time. |
| */ |
| #define ATRACE_INT64(name, value) atrace_int64(ATRACE_TAG, name, value) |
| static inline void atrace_int64(uint64_t tag, const char* name, int64_t value) |
| { |
| if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) { |
| void atrace_int64_body(const char*, int64_t); |
| atrace_int64_body(name, value); |
| } |
| } |
| |
| __END_DECLS |
| |
| #endif // _LIBS_CUTILS_TRACE_H |