softap/sdk/qsap_api.h - platform/system/qcom - Gitiles

 /*
  * Copyright (c) 2010, The Linux Foundation. All rights reserved.

  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
  * met:
  *  * Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *  * Redistributions in binary form must reproduce the above
  *    copyright notice, this list of conditions and the following
  *    disclaimer in the documentation and/or other materials provided
  *    with the distribution.
  *  * Neither the name of The Linux Foundation nor the names of its
  *    contributors may be used to endorse or promote products derived
  *    from this software without specific prior written permission.

  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
  * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
  * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
  * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */


 #ifndef _QSAP_API_H_
 #define _QSAP_API_H_

 #if __cplusplus
 extern "C" {
 #endif
 #include <android/log.h>
 typedef unsigned char      u8;
 typedef char               s8;
 typedef unsigned short int u16;
 typedef signed short int   s16;
 typedef unsigned int       u32;
 typedef signed int         s32;

 /** Success and error messages */
 #define SUCCESS                     "success"
 #define ERR_INVALID_ARG             "failure invalid arguments"
 #define ERR_INVALID_PARAM           "failure invalid parameter"
 #define ERR_UNKNOWN                 "failure unknown error"
 #define ERR_INVALIDCMD              "failure invalid command"
 #define ERR_INVALIDREQ              "failure invalid request"
 #define ERR_FEATURE_NOT_ENABLED     "failure feature not enabled"
 #define ERR_NOT_SUPPORTED           "failure not supported"
 #define ERR_NOT_READY               "failure not ready"
 #define ERR_RES_UNAVAILABLE         "failure resource unavailable"
 #define ERR_SOFTAP_NOT_STARTED      "failure softap not started"

 /** Error numbers used with the SDK */
 enum error_val {
     eERR_UNKNOWN = -1,
     eSUCCESS = 0,
     eERR_STOP_BSS,
     eERR_BSS_NOT_STARTED,
     eERR_COMMIT,
     eERR_START_SAP,
     eERR_STOP_SAP,
     eERR_RELOAD_SAP,
     eERR_FILE_OPEN,
     eERR_CONF_FILE,
     eERR_INVALID_MAC_ADDR,
     eERR_SEND_TO_HOSTAPD,
     eERR_CONFIG_PARAM_MISSING,
     eERR_CHAN_READ,
     eERR_FEATURE_NOT_ENABLED,
     eERR_UNLOAD_FAILED_SDIO,
     eERR_UNLOAD_FAILED_SOFTAP,
     eERR_LOAD_FAILED_SDIOIF,
     eERR_LOAD_FAILED_SOFTAP,
     eERR_SET_CHAN_RANGE,
     eERR_GET_AUTO_CHAN
 };

 #ifndef WIFI_DRIVER_CONF_FILE
 #define WIFI_DRIVER_CONF_FILE            NULL
 #endif

 #ifndef WIFI_DRIVER_DEF_CONF_FILE
 #define WIFI_DRIVER_DEF_CONF_FILE        NULL
 #endif

 /** Configuration file name for SAP+SAP*/
 #define CONFIG_FILE_2G "/data/vendor/wifi/hostapd/hostapd_dual2g.conf"
 #define CONFIG_FILE_5G "/data/vendor/wifi/hostapd/hostapd_dual5g.conf"
 #define CONFIG_FILE_60G "/data/vendor/wifi/hostapd/hostapd_60g.conf"

 /** Configuration file name for OWE-transition */
 #define CONFIG_FILE_OWE "/data/vendor/wifi/hostapd/hostapd_owe.conf"

 /** Configuration file name */
 #define CONFIG_FILE "/data/vendor/wifi/hostapd/hostapd.conf"

 /** Default configuration file path */
 #define DEFAULT_CONFIG_FILE_PATH "/vendor/etc/hostapd/hostapd_default.conf"

 /** Default Accept list file name */
 #define DEFAULT_ACCEPT_LIST_FILE_PATH "/vendor/etc/hostapd/hostapd.accept"

 /** Accept list file name */
 #define ACCEPT_LIST_FILE "/data/vendor/wifi/hostapd/hostapd.accept"

 /** Default Deny list file name */
 #define DEFAULT_DENY_LIST_FILE_PATH "/vendor/etc/hostapd/hostapd.deny"

 /** Deny list file name */
 #define DENY_LIST_FILE "/data/vendor/wifi/hostapd/hostapd.deny"

 /** Default Ini file */
 #define DEFAULT_INI_FILE "/persist/qcom/softap/qcom_cfg_default.ini"

 /** SDK control interface path */
 #define SDK_CTRL_IF "/data/vendor/wifi/hostapd/ctrl/softap_sdk_ctrl"

 /** Maximum length of the line in the configuration file */
 #define MAX_CONF_LINE_LEN  (156)

 /** MAC address length in acsii string format*/
 #define MAC_ADDR_LEN       (17)

 /** MAC address length, as integer */
 #define MAC_ADDR_LEN_INT   (6)
 /** Maximum number of MAC address in the allow / deny MAC list */
 #define MAX_ALLOWED_MAC    (15)

 /** Maximum length of the file path */
 #define MAX_FILE_PATH_LEN  (128)

 /** WPS key length - 8 digit key, usually*/
 #define WPS_KEY_LEN   (8)

 /** Maximum length of the SSID */
 #define SSD_MAX_LEN (32)
 #define CTRY_MAX_LEN (3)

 /** Beacon interval 50 to 65535 */
 #define BCN_INTERVAL_MIN  (1)
 #define BCN_INTERVAL_MAX  (65535)

 /** Passphrase max length 63 bytes, Minumum lenght is 8.
   * NOTE: If Passphrase length is 64, then phassphrase is treated as PSK.
   */
 #define PASSPHRASE_MIN    (8)
 #define PASSPHRASE_MAX    (63)

 /** DTIM period 1 to 255 -- Qualcomm 10 */
 #define DTIM_PERIOD_MIN    (1)
 #define DTIM_PERIOD_MAX    (255)

 /** WEP key lengths in ASCII and hex */
 #define WEP_64_KEY_ASCII  (5)
 #define WEP_64_KEY_HEX    (10)

 #define WEP_128_KEY_ASCII (13)
 #define WEP_128_KEY_HEX   (26)

 #define WEP_152_KEY_ASCII (16)
 #define WEP_152_KEY_HEX   (32)

 #define WPS_PIN_LEN (8)

 #define CHANNEL_MIN    (0)
 #define CHANNEL_MAX    (14)
 #define AUTO_CHANNEL    (0)
 #define BG_MAX_CHANNEL  (11)

 /** Fragmentation threshold 256 to 2346 */
 #define FRAG_THRESHOLD_MIN  (256)
 #define FRAG_THRESHOLD_MAX  (2346)

 /** RTS threshold 1 to 2347 */
 #define RTS_THRESHOLD_MIN   (1)
 #define RTS_THRESHOLD_MAX   (2347)

 #define MIN_UUID_LEN   (1)
 #define MAX_UUID_LEN   (36)

 #define MIN_DEVICENAME_LEN   (1)
 #define MAX_DEVICENAME_LEN   (32)

 #define MIN_MANUFACTURER_LEN   (1)
 #define MAX_MANUFACTURER_LEN   (64)

 #define MIN_MODELNAME_LEN   (1)
 #define MAX_MODELNAME_LEN   (32)

 #define MIN_MODELNUM_LEN   (1)
 #define MAX_MODELNUM_LEN   (32)

 #define MIN_SERIALNUM_LEN  (1)
 #define MAX_SERIALNUM_LEN  (32)

 #define MIN_DEV_TYPE_LEN  (1)
 #define MAX_DEV_TYPE_LEN  (20)

 #define MIN_OS_VERSION_LEN  (1)
 #define MAX_OS_VERSION_LEN  (12)

 #define MIN_FRIENDLY_NAME_LEN  (1)
 #define MAX_FRIENDLY_NAME_LEN  (64)

 #define MAX_URL_LEN  (128)

 #define MIN_MODEL_DESC_LEN  (1)
 #define MAX_MODEL_DESC_LEN  (128)

 #define MIN_UPC_LEN  (1)
 #define MAX_UPC_LEN  (128)

 #define GTK_MIN   (30)

 #define MAX_INT_STR (8)

 /** Tx Power range 2dBm to 18 dBm */
 #define MIN_TX_POWER (2)
 #define MAX_TX_POWER (30)

 /** Data rate index */
 #define MIN_DATA_RATE_IDX (0)
 #define MAX_DATA_RATE_IDX (28)
 #define AUTO_DATA_RATE                   (0)
 #define B_MODE_MAX_DATA_RATE_IDX         (4)
 #define G_ONLY_MODE_MAX_DATA_RATE_IDX    (12)

 /** parameters for read config */
 #define GET_COMMENTED_VALUE 1
 #define GET_ENABLED_ONLY    0

 #define MAX_RESP_LEN 255

 /** AP shutoff time */
 #define AP_SHUTOFF_MIN    (0)
 #define AP_SHUTOFF_MAX    (120)

 /** AP shutoff time */
 #define AP_ENERGY_DETECT_TH_MIN    (0)
 #define AP_ENERGY_DETECT_TH_MAX    (9)

 /** command request index - in the array Cmd_req[] */
 enum eCmd_req {
     eCMD_GET = 0,
     eCMD_SET = 1,

     eCMD_REQ_LAST
 };

 /** config request index - in the array Conf_req[] */
 enum eConf_req {
     CONF_2g = 0,
     CONF_5g = 1,
     CONF_owe = 2,
     CONF_60g = 3,

     CONF_REQ_LAST
 };

 /**
   * Command numbers, these numbers form the index into the array of
   * command names stored in the 'cmd_list'.
   *
   * Warning: An addtion of an entry in 'esap_cmd', should be followed
   * by an addition of a command name string in the 'cmd_list' array
   */
 typedef enum esap_cmd {
     eCMD_INVALID             = -1,
     eCMD_SSID                = 0,
     eCMD_BSSID               = 1,
     eCMD_CHAN                = 2,
     eCMD_BCN_INTERVAL        = 3,
     eCMD_DTIM_PERIOD         = 4,
     eCMD_HW_MODE             = 5,
     eCMD_AUTH_ALGS           = 6,
     eCMD_SEC_MODE            = 7,
     eCMD_WEP_KEY0            = 8,
     eCMD_WEP_KEY1            = 9,
     eCMD_WEP_KEY2            = 10,
     eCMD_WEP_KEY3            = 11,
     eCMD_DEFAULT_KEY         = 12,
     eCMD_PASSPHRASE          = 13,
     eCMD_WPA_PAIRWISE        = 14,
     eCMD_RSN_PAIRWISE        = 15,
     eCMD_MAC_ADDR            = 16,
     eCMD_RESET_AP            = 17,
     eCMD_MAC_ACL             = 18,
     eCMD_ADD_TO_ALLOW        = 19,
     eCMD_ADD_TO_DENY         = 20,
     eCMD_REMOVE_FROM_ALLOW   = 21,
     eCMD_REMOVE_FROM_DENY    = 22,
     eCMD_ALLOW_LIST          = 23,
     eCMD_DENY_LIST           = 24,
     eCMD_COMMIT              = 25,
     eCMD_ENABLE_SOFTAP       = 26,
     eCMD_DISASSOC_STA        = 27,
     eCMD_RESET_TO_DEFAULT    = 28,
     eCMD_PROTECTION_FLAG     = 29,
     eCMD_DATA_RATES          = 30,
     eCMD_ASSOC_STA_MACS      = 31,
     eCMD_TX_POWER            = 32,
     eCMD_SDK_VERSION         = 33,
     eCMD_WMM_STATE           = 34,

     /** WARNING: The order of WPS commands should not be altered.
         New commands SHOULD be added above or below this            */
     eCMD_WPS_STATE           = 35,
     eCMD_WPS_CONFIG_METHOD     = 36,
     eCMD_UUID                = 37,
     eCMD_DEVICE_NAME         = 38,
     eCMD_MANUFACTURER        = 39,
     eCMD_MODEL_NAME          = 40,
     eCMD_MODEL_NUMBER        = 41,
     eCMD_SERIAL_NUMBER       = 42,
     eCMD_DEVICE_TYPE         = 43,
     eCMD_OS_VERSION          = 44,
     eCMD_FRIENDLY_NAME       = 45,
     eCMD_MANUFACTURER_URL    = 46,
     eCMD_MODEL_DESC          = 47,
     eCMD_MODEL_URL           = 48,
     eCMD_UPC                 = 49,
     /******************************************************/

     eCMD_FRAG_THRESHOLD      = 50,
     eCMD_RTS_THRESHOLD       = 51,
     eCMD_GTK_TIMEOUT         = 52,
     eCMD_COUNTRY_CODE        = 53,
     eCMD_INTRA_BSS_FORWARD   = 54,
     eCMD_REGULATORY_DOMAIN   = 55,
     eCMD_AP_STATISTICS       = 56,
     eCMD_AP_AUTOSHUTOFF      = 57,
     eCMD_AP_ENERGY_DETECT_TH = 58,
     eCMD_BASIC_RATES         = 59,
     eCMD_REQUIRE_HT          = 60,
     eCMD_IEEE80211N          = 61,
     eCMD_SET_CHANNEL_RANGE   = 62,
     eCMD_GET_AUTO_CHANNEL    = 63,
     eCMD_IEEE80211W          = 64,
     eCMD_WPA_KEY_MGMT        = 65,
     eCMD_SET_MAX_CLIENTS     = 66,
     eCMD_IEEE80211AC         = 67,
     eCMD_VHT_OPER_CH_WIDTH   = 68,
     eCMD_ACS_CHAN_LIST       = 69,
     eCMD_HT_CAPAB            = 70,
     eCMD_IEEE80211H          = 71,

     eCMD_ENABLE_WIGIG_SOFTAP = 72,
     eCMD_INTERFACE           = 73,
     eCMD_SSID2               = 74,
     eCMD_BRIDGE              = 75,
     eCMD_CTRL_INTERFACE      = 76,
     eCMD_VENDOR_ELEMENT      = 77,
     eCMD_ASSOCRESP_ELEMENT   = 78,
     eCMD_ACS_EXCLUDE_DFS     = 79,
     eCMD_WOWLAN_TRIGGERS     = 80,
     eCMD_ACCEPT_MAC_FILE     = 81,
     eCMD_DENY_MAC_FILE       = 82,
     eCMD_OWE_TRANS_IFNAME    = 83,
     eCMD_SAE_REQUIRE_MPF     = 84,

     eCMD_IEEE80211AX         = 85,

     eCMD_ENABLE_EDMG         = 86,
     eCMD_EDMG_CHANNEL        = 87,

     eCMD_LAST     /** New command numbers should be added above this */
 } esap_cmd_t;

 /** non-commands */
 typedef enum esap_str {
     STR_WPA                      = 0,
     STR_ACCEPT_MAC_FILE          = 1,
     STR_DENY_MAC_FILE            = 2,
     STR_MAC_IN_INI               = 3,
     STR_PROT_FLAG_IN_INI         = 4,
     STR_DATA_RATE_IN_INI         = 5,
     STR_TX_POWER_IN_INI          = 6,
     STR_FRAG_THRESHOLD_IN_INI    = 7,
     STR_RTS_THRESHOLD_IN_INI     = 8,
     STR_COUNTRY_CODE_IN_INI      = 9,
     STR_INTRA_BSS_FORWARD_IN_INI = 10,
     STR_WMM_IN_INI               = 11,
     STR_802DOT11D_IN_INI         = 12,
     STR_HT_80211N                = 13,
     STR_CTRL_INTERFACE           = 14,
     STR_INTERFACE                = 15,
     STR_EAP_SERVER               = 16,
     STR_AP_AUTOSHUTOFF           = 17,
     STR_AP_ENERGY_DETECT_TH      = 18,
     eSTR_LAST
 } esap_str_t;

 /** Supported security mode */
 typedef enum sec_mode {
     SEC_MODE_NONE            = 0,
     SEC_MODE_WEP             = 1,
     SEC_MODE_WPA_PSK         = 2,
     SEC_MODE_WPA2_PSK        = 3,
     SEC_MODE_WPA_WPA2_PSK    = 4,

     SEC_MODE_INVALID
 } sec_mode_t;

 /** security mode in the configuration file */
 enum wpa_in_conf_file {
     WPA_IN_CONF_FILE = 1,
     WPA2_IN_CONF_FILE = 2,
     WPA_WPA2_IN_CONF_FILE = 3
 };

 enum {
     DISABLE   = 0,
     ENABLE    = 1
 };

 enum {
     FALSE = 0,
     TRUE = 1
 };

 /** IEEE 802.11 operating mode */
 enum oper_mode {
     HW_MODE_B = 0,
     HW_MODE_G = 1,
     HW_MODE_N = 2,
     HW_MODE_G_ONLY = 3,
     HW_MODE_N_ONLY = 4,
     HW_MODE_A = 5,
     HW_MODE_ANY = 6,
     HW_MODE_AD = 7,

     HW_MODE_UNKNOWN
 };

 /** Authentication algorithm */
 enum auth_alg {
     AHTH_ALG_OPEN = 1,
     AUTH_ALG_SHARED = 2,
     AUTH_ALG_OPEN_SHARED = 3,

     AUTH_ALG_INVALID
 };

 /** Allow or Deny MAC address list selection */
 enum macaddr_acl {
     ACL_DENY_LIST = 0,
     ACL_ALLOW_LIST = 1,
     ACL_ALLOW_AND_DENY_LIST = 2
 };

 enum ap_reset {
     SAP_RESET_BSS = 0,
     SAP_RESET_DRIVER_BSS = 1,
     SAP_STOP_BSS = 2,
     SAP_STOP_DRIVER_BSS = 3,
 #ifdef QCOM_WLAN_CONCURRENCY
     SAP_INITAP = 4,
     SAP_EXITAP = 5,
 #endif
     SAP_RESET_INVALID
 };

 enum wmm_state {
     WMM_AUTO_IN_INI = 0,
     WMM_ENABLED_IN_INI = 1,
     WMM_DISABLED_IN_INI = 2
 };

 enum wps_state {
     WPS_STATE_DISABLE = 0,
     WPS_STATE_ENABLE  = 2
 };


 enum wps_config {
     WPS_CONFIG_PBC = 0,
     WPS_CONFIG_PIN = 1,
 };

 /** Choose the configuration file */
 enum eChoose_conf_file {
     HOSTAPD_CONF_QCOM_FILE = 0,
     INI_CONF_FILE = 1
 };

 struct Command
 {
     s8  * name;
     s8  * default_value;
 };

 /** STA Channel information*/
 typedef struct sta_channel_info {
         int subioctl;
         int stastartchan;
         int staendchan;
         int staband;
 } sta_channel_info;

 /**SAP Channel information*/
 typedef struct sap_channel_info {
         int startchan;
         int endchan;
         int band;
 } sap_channel_info;

 /**SAP  auto Channel information*/
 typedef struct sap_auto_channel_info {
         int subioctl;
 } sap_auto_channel_info;

 /** Validate enable / disable softap */
 #define IS_VALID_SOFTAP_ENABLE(x) (((value == ENABLE) || (value == DISABLE)) ? TRUE: FALSE)

 /** Validate the channel */
 #define IS_VALID_CHANNEL(x) ((value >= CHANNEL_MIN) && (value <= CHANNEL_MAX) ? TRUE : FALSE)

 /** Validate the security mode */
 #define IS_VALID_SEC_MODE(x) (((x >= SEC_MODE_NONE) && (x < SEC_MODE_INVALID)) ? TRUE : FALSE)

 /** Validate the selection of access or deny MAC address list */
 #define IS_VALID_MAC_ACL(x) (((x==ACL_DENY_LIST) || (x==ACL_ALLOW_LIST) || (x==ACL_ALLOW_AND_DENY_LIST)) ? TRUE : FALSE)

 /** Validate the broadcast SSID status */
 #define IS_VALID_BSSID(x) (((value == ENABLE) || (value == DISABLE)) ? TRUE: FALSE)

 /** Validate the length of the passphrase */
 #define IS_VALID_PASSPHRASE_LEN(x) ((((x >= PASSPHRASE_MIN) && (x <= PASSPHRASE_MAX)) || (x == 0)) ? TRUE: FALSE)

 /** Validate the beacon interval */
 #define IS_VALID_BEACON(x) (((x >= BCN_INTERVAL_MIN) && (x <= BCN_INTERVAL_MAX)) ? TRUE: FALSE)

 /** Validate the DTIM period */
 #define IS_VALID_DTIM_PERIOD(x) (((x >= DTIM_PERIOD_MIN) && (x <= DTIM_PERIOD_MAX)) ? TRUE: FALSE)

 /** Validate the WEP index */
 #define IS_VALID_WEP_KEY_IDX(x) ((x >= 0) && (x < 4) ? TRUE : FALSE)

 /** Validate the pairwise encryption */
 #define IS_VALID_PAIRWISE(x) (((!strcmp(x, "TKIP")) || (!strcmp(x, "CCMP")) || \
                     (!strcmp(x, "TKIP CCMP")) || (!strcmp(x, "CCMP TKIP")) || (!strcmp(x, "GCMP"))) ? TRUE : FALSE)

 /** Validate the WMM status */
 #define IS_VALID_WMM_STATE(x) (((x >= WMM_AUTO_IN_INI) && (x <= WMM_DISABLED_IN_INI)) ? TRUE: FALSE)

 /** Validate the WPS status */
 #define IS_VALID_WPS_STATE(x) (((x == ENABLE) || (x == DISABLE)) ? TRUE: FALSE)

 /** Validate the fragmentation threshold */
 #define IS_VALID_FRAG_THRESHOLD(x) (((x >= FRAG_THRESHOLD_MIN) && (x <= FRAG_THRESHOLD_MAX)) ? TRUE: FALSE)

 /** Validate the RTS threshold value */
 #define IS_VALID_RTS_THRESHOLD(x) (((x >= RTS_THRESHOLD_MIN) && (x <= RTS_THRESHOLD_MAX)) ? TRUE: FALSE)

 /** Validate the GTK */
 #define IS_VALID_GTK(x) ((x >= GTK_MIN) ? TRUE: FALSE)

 /** Validate the intra-bss forwarding status */
 #define IS_VALID_INTRA_BSS_STATUS(x) (((x == ENABLE) || (x == DISABLE)) ? TRUE: FALSE)

 /** Validate the protection flag */
 #define IS_VALID_PROTECTION(x) (((x == ENABLE) || (x == DISABLE)) ? TRUE: FALSE)

 /** Validate the UUID length */
 #define IS_VALID_UUID_LEN(x) (((x >= MIN_UUID_LEN) && (x <= MAX_UUID_LEN)) ? TRUE : FALSE)

 /** Validate the device name length */
 #define IS_VALID_DEVICENAME_LEN(x) (((x >= MIN_DEVICENAME_LEN) && (x <= MAX_DEVICENAME_LEN)) ? TRUE : FALSE)

 /** Validate the Manufacturer length */
 #define IS_VALID_MANUFACTURER_LEN(x) (((x >= MIN_MANUFACTURER_LEN) && (x <= MAX_MANUFACTURER_LEN)) ? TRUE : FALSE)

 /** Validate the Model name length */
 #define IS_VALID_MODELNAME_LEN(x) (((x >= MIN_MODELNAME_LEN) && (x <= MAX_MODELNAME_LEN)) ? TRUE : FALSE)

 /** Validate the Model number length */
 #define IS_VALID_MODELNUM_LEN(x) (((x >= MIN_MODELNUM_LEN) && (x <= MAX_MODELNUM_LEN)) ? TRUE : FALSE)

 /** Validate the Model serial number length */
 #define IS_VALID_SERIALNUM_LEN(x) (((x >= MIN_SERIALNUM_LEN) && (x <= MAX_SERIALNUM_LEN)) ? TRUE : FALSE)

 /** Validate the Primary device type length */
 #define IS_VALID_DEV_TYPE_LEN(x) (((x >= MIN_DEV_TYPE_LEN) && (x <= MAX_DEV_TYPE_LEN)) ? TRUE : FALSE)

 /** Validate the OS version length */
 #define IS_VALID_OS_VERSION_LEN(x) (((x >= MIN_OS_VERSION_LEN) && (x <= MAX_OS_VERSION_LEN)) ? TRUE : FALSE)

 /** Validate the friendly name length */
 #define IS_VALID_FRIENDLY_NAME_LEN(x) (((x >= MIN_FRIENDLY_NAME_LEN) && (x <= MAX_FRIENDLY_NAME_LEN)) ? TRUE : FALSE)

 /** Validate the URL length */
 #define IS_VALID_URL_LEN(x) (((x > 0) && (x <= MAX_URL_LEN)) ? TRUE : FALSE)

 /** Validate the model description length */
 #define IS_VALID_MODEL_DESC_LEN(x) (((x > MIN_MODEL_DESC_LEN) && (x <= MAX_MODEL_DESC_LEN)) ? TRUE : FALSE)

 /** Validate the Universal Product Code (UPC) length */
 #define IS_VALID_UPC_LEN(x) (((x > MIN_UPC_LEN) && (x <= MAX_UPC_LEN)) ? TRUE : FALSE)

 /** Validate the Tx power index */
 #define IS_VALID_TX_POWER(x) (((x >= MIN_TX_POWER ) && (x <= MAX_TX_POWER)) ? TRUE : FALSE)

 /** Validate the Data rate */
 #define IS_VALID_DATA_RATE_IDX(x) (((x >= MIN_DATA_RATE_IDX) && (x <= MAX_DATA_RATE_IDX)) ? TRUE : FALSE )

 /** Validate WPS config */
 #define IS_VALID_WPS_CONFIG(x) (((x == WPS_CONFIG_PBC) || (x == WPS_CONFIG_PIN)) ? TRUE : FALSE)

 /** Validate the 802dot11d state */
 #define IS_VALID_802DOT11D_STATE(x) (((x == ENABLE) || (x == DISABLE)) ? TRUE: FALSE)

 /** Validate the AP shutoff time */
 #define IS_VALID_APSHUTOFFTIME(x) (((x >= AP_SHUTOFF_MIN) && (x <= AP_SHUTOFF_MAX)) ? TRUE : FALSE)

 /** Validate the AP shutoff time */
 #define IS_VALID_ENERGY_DETECT_TH(x) ((((x >= AP_ENERGY_DETECT_TH_MIN) && (x <= AP_ENERGY_DETECT_TH_MAX)) ||( x == 128)) ? TRUE : FALSE)

 /** Validate the 802dot11h state */
 #define IS_VALID_DFS_STATE(x) (((x == ENABLE) || (x == DISABLE)) ? TRUE: FALSE)

 /** Function declartion */
 int qsap_hostd_exec(int argc, char ** argv);
 void qsap_hostd_exec_cmd(s8 *pcmd, s8 *presp, u32 *plen);
 s8 *qsap_get_config_value(s8 *pfile, struct Command *pcmd, s8 *pbuf, u32 *plen);
 int qsapsetSoftap(int argc, char *argv[]);
 int qsap_add_or_remove_interface(const char *iface_name, int create_iface);
 void qsap_del_ctrl_iface(void);
 s16 wifi_qsap_reset_to_default(s8 *pcfgfile, s8 *pdefault);
 void check_for_configuration_files(void);
 void qsap_set_ini_filename(void);
 int qsap_set_channel_range(s8 * cmd);
 int qsap_get_sap_auto_channel_slection(s32 *pautochan);
 int qsap_get_mode(s32 *pmode);
 int qsap_prepare_softap(void);
 int qsap_unprepare_softap(void);
 int qsap_is_fst_enabled(void);
 int qsap_control_bridge(int argc, char ** argv);
 int linux_get_ifhwaddr(const char *ifname, char *addr);

 #if __cplusplus
 };  // extern "C"
 #endif

 #endif
	/*
	* Copyright (c) 2010, The Linux Foundation. All rights reserved.

	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are
	* met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above
	* copyright notice, this list of conditions and the following
	* disclaimer in the documentation and/or other materials provided
	* with the distribution.
	* * Neither the name of The Linux Foundation nor the names of its
	* contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.

	* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
	* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
	* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
	* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
	* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
	* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/


	#ifndef _QSAP_API_H_
	#define _QSAP_API_H_

	#if __cplusplus
	extern "C" {
	#endif
	#include <android/log.h>
	typedef unsigned char u8;
	typedef char s8;
	typedef unsigned short int u16;
	typedef signed short int s16;
	typedef unsigned int u32;
	typedef signed int s32;

	/** Success and error messages */
	#define SUCCESS "success"
	#define ERR_INVALID_ARG "failure invalid arguments"
	#define ERR_INVALID_PARAM "failure invalid parameter"
	#define ERR_UNKNOWN "failure unknown error"
	#define ERR_INVALIDCMD "failure invalid command"
	#define ERR_INVALIDREQ "failure invalid request"
	#define ERR_FEATURE_NOT_ENABLED "failure feature not enabled"
	#define ERR_NOT_SUPPORTED "failure not supported"
	#define ERR_NOT_READY "failure not ready"
	#define ERR_RES_UNAVAILABLE "failure resource unavailable"
	#define ERR_SOFTAP_NOT_STARTED "failure softap not started"

	/** Error numbers used with the SDK */
	enum error_val {
	eERR_UNKNOWN = -1,
	eSUCCESS = 0,
	eERR_STOP_BSS,
	eERR_BSS_NOT_STARTED,
	eERR_COMMIT,
	eERR_START_SAP,
	eERR_STOP_SAP,
	eERR_RELOAD_SAP,
	eERR_FILE_OPEN,
	eERR_CONF_FILE,
	eERR_INVALID_MAC_ADDR,
	eERR_SEND_TO_HOSTAPD,
	eERR_CONFIG_PARAM_MISSING,
	eERR_CHAN_READ,
	eERR_FEATURE_NOT_ENABLED,
	eERR_UNLOAD_FAILED_SDIO,
	eERR_UNLOAD_FAILED_SOFTAP,
	eERR_LOAD_FAILED_SDIOIF,
	eERR_LOAD_FAILED_SOFTAP,
	eERR_SET_CHAN_RANGE,
	eERR_GET_AUTO_CHAN
	};

	#ifndef WIFI_DRIVER_CONF_FILE
	#define WIFI_DRIVER_CONF_FILE NULL
	#endif

	#ifndef WIFI_DRIVER_DEF_CONF_FILE
	#define WIFI_DRIVER_DEF_CONF_FILE NULL
	#endif

	/** Configuration file name for SAP+SAP*/
	#define CONFIG_FILE_2G "/data/vendor/wifi/hostapd/hostapd_dual2g.conf"
	#define CONFIG_FILE_5G "/data/vendor/wifi/hostapd/hostapd_dual5g.conf"
	#define CONFIG_FILE_60G "/data/vendor/wifi/hostapd/hostapd_60g.conf"

	/** Configuration file name for OWE-transition */
	#define CONFIG_FILE_OWE "/data/vendor/wifi/hostapd/hostapd_owe.conf"

	/** Configuration file name */
	#define CONFIG_FILE "/data/vendor/wifi/hostapd/hostapd.conf"

	/** Default configuration file path */
	#define DEFAULT_CONFIG_FILE_PATH "/vendor/etc/hostapd/hostapd_default.conf"

	/** Default Accept list file name */
	#define DEFAULT_ACCEPT_LIST_FILE_PATH "/vendor/etc/hostapd/hostapd.accept"

	/** Accept list file name */
	#define ACCEPT_LIST_FILE "/data/vendor/wifi/hostapd/hostapd.accept"

	/** Default Deny list file name */
	#define DEFAULT_DENY_LIST_FILE_PATH "/vendor/etc/hostapd/hostapd.deny"

	/** Deny list file name */
	#define DENY_LIST_FILE "/data/vendor/wifi/hostapd/hostapd.deny"

	/** Default Ini file */
	#define DEFAULT_INI_FILE "/persist/qcom/softap/qcom_cfg_default.ini"

	/** SDK control interface path */
	#define SDK_CTRL_IF "/data/vendor/wifi/hostapd/ctrl/softap_sdk_ctrl"

	/** Maximum length of the line in the configuration file */
	#define MAX_CONF_LINE_LEN (156)

	/** MAC address length in acsii string format*/
	#define MAC_ADDR_LEN (17)

	/** MAC address length, as integer */
	#define MAC_ADDR_LEN_INT (6)
	/** Maximum number of MAC address in the allow / deny MAC list */
	#define MAX_ALLOWED_MAC (15)

	/** Maximum length of the file path */
	#define MAX_FILE_PATH_LEN (128)

	/** WPS key length - 8 digit key, usually*/
	#define WPS_KEY_LEN (8)

	/** Maximum length of the SSID */
	#define SSD_MAX_LEN (32)
	#define CTRY_MAX_LEN (3)

	/** Beacon interval 50 to 65535 */
	#define BCN_INTERVAL_MIN (1)
	#define BCN_INTERVAL_MAX (65535)

	/** Passphrase max length 63 bytes, Minumum lenght is 8.
	* NOTE: If Passphrase length is 64, then phassphrase is treated as PSK.
	*/
	#define PASSPHRASE_MIN (8)
	#define PASSPHRASE_MAX (63)

	/** DTIM period 1 to 255 -- Qualcomm 10 */
	#define DTIM_PERIOD_MIN (1)
	#define DTIM_PERIOD_MAX (255)

	/** WEP key lengths in ASCII and hex */
	#define WEP_64_KEY_ASCII (5)
	#define WEP_64_KEY_HEX (10)

	#define WEP_128_KEY_ASCII (13)
	#define WEP_128_KEY_HEX (26)

	#define WEP_152_KEY_ASCII (16)
	#define WEP_152_KEY_HEX (32)

	#define WPS_PIN_LEN (8)

	#define CHANNEL_MIN (0)
	#define CHANNEL_MAX (14)
	#define AUTO_CHANNEL (0)
	#define BG_MAX_CHANNEL (11)

	/** Fragmentation threshold 256 to 2346 */
	#define FRAG_THRESHOLD_MIN (256)
	#define FRAG_THRESHOLD_MAX (2346)

	/** RTS threshold 1 to 2347 */
	#define RTS_THRESHOLD_MIN (1)
	#define RTS_THRESHOLD_MAX (2347)

	#define MIN_UUID_LEN (1)
	#define MAX_UUID_LEN (36)

	#define MIN_DEVICENAME_LEN (1)
	#define MAX_DEVICENAME_LEN (32)

	#define MIN_MANUFACTURER_LEN (1)
	#define MAX_MANUFACTURER_LEN (64)

	#define MIN_MODELNAME_LEN (1)
	#define MAX_MODELNAME_LEN (32)

	#define MIN_MODELNUM_LEN (1)
	#define MAX_MODELNUM_LEN (32)

	#define MIN_SERIALNUM_LEN (1)
	#define MAX_SERIALNUM_LEN (32)

	#define MIN_DEV_TYPE_LEN (1)
	#define MAX_DEV_TYPE_LEN (20)

	#define MIN_OS_VERSION_LEN (1)
	#define MAX_OS_VERSION_LEN (12)

	#define MIN_FRIENDLY_NAME_LEN (1)
	#define MAX_FRIENDLY_NAME_LEN (64)

	#define MAX_URL_LEN (128)

	#define MIN_MODEL_DESC_LEN (1)
	#define MAX_MODEL_DESC_LEN (128)

	#define MIN_UPC_LEN (1)
	#define MAX_UPC_LEN (128)

	#define GTK_MIN (30)

	#define MAX_INT_STR (8)

	/** Tx Power range 2dBm to 18 dBm */
	#define MIN_TX_POWER (2)
	#define MAX_TX_POWER (30)

	/** Data rate index */
	#define MIN_DATA_RATE_IDX (0)
	#define MAX_DATA_RATE_IDX (28)
	#define AUTO_DATA_RATE (0)
	#define B_MODE_MAX_DATA_RATE_IDX (4)
	#define G_ONLY_MODE_MAX_DATA_RATE_IDX (12)

	/** parameters for read config */
	#define GET_COMMENTED_VALUE 1
	#define GET_ENABLED_ONLY 0

	#define MAX_RESP_LEN 255

	/** AP shutoff time */
	#define AP_SHUTOFF_MIN (0)
	#define AP_SHUTOFF_MAX (120)

	/** AP shutoff time */
	#define AP_ENERGY_DETECT_TH_MIN (0)
	#define AP_ENERGY_DETECT_TH_MAX (9)

	/** command request index - in the array Cmd_req[] */
	enum eCmd_req {
	eCMD_GET = 0,
	eCMD_SET = 1,

	eCMD_REQ_LAST
	};

	/** config request index - in the array Conf_req[] */
	enum eConf_req {
	CONF_2g = 0,
	CONF_5g = 1,
	CONF_owe = 2,
	CONF_60g = 3,

	CONF_REQ_LAST
	};

	/**
	* Command numbers, these numbers form the index into the array of
	* command names stored in the 'cmd_list'.
	*
	* Warning: An addtion of an entry in 'esap_cmd', should be followed
	* by an addition of a command name string in the 'cmd_list' array
	*/
	typedef enum esap_cmd {
	eCMD_INVALID = -1,
	eCMD_SSID = 0,
	eCMD_BSSID = 1,
	eCMD_CHAN = 2,
	eCMD_BCN_INTERVAL = 3,
	eCMD_DTIM_PERIOD = 4,
	eCMD_HW_MODE = 5,
	eCMD_AUTH_ALGS = 6,
	eCMD_SEC_MODE = 7,
	eCMD_WEP_KEY0 = 8,
	eCMD_WEP_KEY1 = 9,
	eCMD_WEP_KEY2 = 10,
	eCMD_WEP_KEY3 = 11,
	eCMD_DEFAULT_KEY = 12,
	eCMD_PASSPHRASE = 13,
	eCMD_WPA_PAIRWISE = 14,
	eCMD_RSN_PAIRWISE = 15,
	eCMD_MAC_ADDR = 16,
	eCMD_RESET_AP = 17,
	eCMD_MAC_ACL = 18,
	eCMD_ADD_TO_ALLOW = 19,
	eCMD_ADD_TO_DENY = 20,
	eCMD_REMOVE_FROM_ALLOW = 21,
	eCMD_REMOVE_FROM_DENY = 22,
	eCMD_ALLOW_LIST = 23,
	eCMD_DENY_LIST = 24,
	eCMD_COMMIT = 25,
	eCMD_ENABLE_SOFTAP = 26,
	eCMD_DISASSOC_STA = 27,
	eCMD_RESET_TO_DEFAULT = 28,
	eCMD_PROTECTION_FLAG = 29,
	eCMD_DATA_RATES = 30,
	eCMD_ASSOC_STA_MACS = 31,
	eCMD_TX_POWER = 32,
	eCMD_SDK_VERSION = 33,
	eCMD_WMM_STATE = 34,

	/** WARNING: The order of WPS commands should not be altered.
	New commands SHOULD be added above or below this */
	eCMD_WPS_STATE = 35,
	eCMD_WPS_CONFIG_METHOD = 36,
	eCMD_UUID = 37,
	eCMD_DEVICE_NAME = 38,
	eCMD_MANUFACTURER = 39,
	eCMD_MODEL_NAME = 40,
	eCMD_MODEL_NUMBER = 41,
	eCMD_SERIAL_NUMBER = 42,
	eCMD_DEVICE_TYPE = 43,
	eCMD_OS_VERSION = 44,
	eCMD_FRIENDLY_NAME = 45,
	eCMD_MANUFACTURER_URL = 46,
	eCMD_MODEL_DESC = 47,
	eCMD_MODEL_URL = 48,
	eCMD_UPC = 49,
	/******************************************************/

	eCMD_FRAG_THRESHOLD = 50,
	eCMD_RTS_THRESHOLD = 51,
	eCMD_GTK_TIMEOUT = 52,
	eCMD_COUNTRY_CODE = 53,
	eCMD_INTRA_BSS_FORWARD = 54,
	eCMD_REGULATORY_DOMAIN = 55,
	eCMD_AP_STATISTICS = 56,
	eCMD_AP_AUTOSHUTOFF = 57,
	eCMD_AP_ENERGY_DETECT_TH = 58,
	eCMD_BASIC_RATES = 59,
	eCMD_REQUIRE_HT = 60,
	eCMD_IEEE80211N = 61,
	eCMD_SET_CHANNEL_RANGE = 62,
	eCMD_GET_AUTO_CHANNEL = 63,
	eCMD_IEEE80211W = 64,
	eCMD_WPA_KEY_MGMT = 65,
	eCMD_SET_MAX_CLIENTS = 66,
	eCMD_IEEE80211AC = 67,
	eCMD_VHT_OPER_CH_WIDTH = 68,
	eCMD_ACS_CHAN_LIST = 69,
	eCMD_HT_CAPAB = 70,
	eCMD_IEEE80211H = 71,

	eCMD_ENABLE_WIGIG_SOFTAP = 72,
	eCMD_INTERFACE = 73,
	eCMD_SSID2 = 74,
	eCMD_BRIDGE = 75,
	eCMD_CTRL_INTERFACE = 76,
	eCMD_VENDOR_ELEMENT = 77,
	eCMD_ASSOCRESP_ELEMENT = 78,
	eCMD_ACS_EXCLUDE_DFS = 79,
	eCMD_WOWLAN_TRIGGERS = 80,
	eCMD_ACCEPT_MAC_FILE = 81,
	eCMD_DENY_MAC_FILE = 82,
	eCMD_OWE_TRANS_IFNAME = 83,
	eCMD_SAE_REQUIRE_MPF = 84,

	eCMD_IEEE80211AX = 85,

	eCMD_ENABLE_EDMG = 86,
	eCMD_EDMG_CHANNEL = 87,

	eCMD_LAST /** New command numbers should be added above this */
	} esap_cmd_t;

	/** non-commands */
	typedef enum esap_str {
	STR_WPA = 0,
	STR_ACCEPT_MAC_FILE = 1,
	STR_DENY_MAC_FILE = 2,
	STR_MAC_IN_INI = 3,
	STR_PROT_FLAG_IN_INI = 4,
	STR_DATA_RATE_IN_INI = 5,
	STR_TX_POWER_IN_INI = 6,
	STR_FRAG_THRESHOLD_IN_INI = 7,
	STR_RTS_THRESHOLD_IN_INI = 8,
	STR_COUNTRY_CODE_IN_INI = 9,
	STR_INTRA_BSS_FORWARD_IN_INI = 10,
	STR_WMM_IN_INI = 11,
	STR_802DOT11D_IN_INI = 12,
	STR_HT_80211N = 13,
	STR_CTRL_INTERFACE = 14,
	STR_INTERFACE = 15,
	STR_EAP_SERVER = 16,
	STR_AP_AUTOSHUTOFF = 17,
	STR_AP_ENERGY_DETECT_TH = 18,
	eSTR_LAST
	} esap_str_t;

	/** Supported security mode */
	typedef enum sec_mode {
	SEC_MODE_NONE = 0,
	SEC_MODE_WEP = 1,
	SEC_MODE_WPA_PSK = 2,
	SEC_MODE_WPA2_PSK = 3,
	SEC_MODE_WPA_WPA2_PSK = 4,

	SEC_MODE_INVALID
	} sec_mode_t;

	/** security mode in the configuration file */
	enum wpa_in_conf_file {
	WPA_IN_CONF_FILE = 1,
	WPA2_IN_CONF_FILE = 2,
	WPA_WPA2_IN_CONF_FILE = 3
	};

	enum {
	DISABLE = 0,
	ENABLE = 1
	};

	enum {
	FALSE = 0,
	TRUE = 1
	};

	/** IEEE 802.11 operating mode */
	enum oper_mode {
	HW_MODE_B = 0,
	HW_MODE_G = 1,
	HW_MODE_N = 2,
	HW_MODE_G_ONLY = 3,
	HW_MODE_N_ONLY = 4,
	HW_MODE_A = 5,
	HW_MODE_ANY = 6,
	HW_MODE_AD = 7,

	HW_MODE_UNKNOWN
	};

	/** Authentication algorithm */
	enum auth_alg {
	AHTH_ALG_OPEN = 1,
	AUTH_ALG_SHARED = 2,
	AUTH_ALG_OPEN_SHARED = 3,

	AUTH_ALG_INVALID
	};

	/** Allow or Deny MAC address list selection */
	enum macaddr_acl {
	ACL_DENY_LIST = 0,
	ACL_ALLOW_LIST = 1,
	ACL_ALLOW_AND_DENY_LIST = 2
	};

	enum ap_reset {
	SAP_RESET_BSS = 0,
	SAP_RESET_DRIVER_BSS = 1,
	SAP_STOP_BSS = 2,
	SAP_STOP_DRIVER_BSS = 3,
	#ifdef QCOM_WLAN_CONCURRENCY
	SAP_INITAP = 4,
	SAP_EXITAP = 5,
	#endif
	SAP_RESET_INVALID
	};

	enum wmm_state {
	WMM_AUTO_IN_INI = 0,
	WMM_ENABLED_IN_INI = 1,
	WMM_DISABLED_IN_INI = 2
	};

	enum wps_state {
	WPS_STATE_DISABLE = 0,
	WPS_STATE_ENABLE = 2
	};


	enum wps_config {
	WPS_CONFIG_PBC = 0,
	WPS_CONFIG_PIN = 1,
	};

	/** Choose the configuration file */
	enum eChoose_conf_file {
	HOSTAPD_CONF_QCOM_FILE = 0,
	INI_CONF_FILE = 1
	};

	struct Command
	{
	s8 * name;
	s8 * default_value;
	};

	/** STA Channel information*/
	typedef struct sta_channel_info {
	int subioctl;
	int stastartchan;
	int staendchan;
	int staband;
	} sta_channel_info;

	/*SAP Channel information/
	typedef struct sap_channel_info {
	int startchan;
	int endchan;
	int band;
	} sap_channel_info;

	/*SAP auto Channel information/
	typedef struct sap_auto_channel_info {
	int subioctl;
	} sap_auto_channel_info;

	/** Validate enable / disable softap */
	#define IS_VALID_SOFTAP_ENABLE(x) (((value == ENABLE) \|\| (value == DISABLE)) ? TRUE: FALSE)

	/** Validate the channel */
	#define IS_VALID_CHANNEL(x) ((value >= CHANNEL_MIN) && (value <= CHANNEL_MAX) ? TRUE : FALSE)

	/** Validate the security mode */
	#define IS_VALID_SEC_MODE(x) (((x >= SEC_MODE_NONE) && (x < SEC_MODE_INVALID)) ? TRUE : FALSE)

	/** Validate the selection of access or deny MAC address list */
	#define IS_VALID_MAC_ACL(x) (((x==ACL_DENY_LIST) \|\| (x==ACL_ALLOW_LIST) \|\| (x==ACL_ALLOW_AND_DENY_LIST)) ? TRUE : FALSE)

	/** Validate the broadcast SSID status */
	#define IS_VALID_BSSID(x) (((value == ENABLE) \|\| (value == DISABLE)) ? TRUE: FALSE)

	/** Validate the length of the passphrase */
	#define IS_VALID_PASSPHRASE_LEN(x) ((((x >= PASSPHRASE_MIN) && (x <= PASSPHRASE_MAX)) \|\| (x == 0)) ? TRUE: FALSE)

	/** Validate the beacon interval */
	#define IS_VALID_BEACON(x) (((x >= BCN_INTERVAL_MIN) && (x <= BCN_INTERVAL_MAX)) ? TRUE: FALSE)

	/** Validate the DTIM period */
	#define IS_VALID_DTIM_PERIOD(x) (((x >= DTIM_PERIOD_MIN) && (x <= DTIM_PERIOD_MAX)) ? TRUE: FALSE)

	/** Validate the WEP index */
	#define IS_VALID_WEP_KEY_IDX(x) ((x >= 0) && (x < 4) ? TRUE : FALSE)

	/** Validate the pairwise encryption */
	#define IS_VALID_PAIRWISE(x) (((!strcmp(x, "TKIP")) \|\| (!strcmp(x, "CCMP")) \|\| \
	(!strcmp(x, "TKIP CCMP")) \|\| (!strcmp(x, "CCMP TKIP")) \|\| (!strcmp(x, "GCMP"))) ? TRUE : FALSE)

	/** Validate the WMM status */
	#define IS_VALID_WMM_STATE(x) (((x >= WMM_AUTO_IN_INI) && (x <= WMM_DISABLED_IN_INI)) ? TRUE: FALSE)

	/** Validate the WPS status */
	#define IS_VALID_WPS_STATE(x) (((x == ENABLE) \|\| (x == DISABLE)) ? TRUE: FALSE)

	/** Validate the fragmentation threshold */
	#define IS_VALID_FRAG_THRESHOLD(x) (((x >= FRAG_THRESHOLD_MIN) && (x <= FRAG_THRESHOLD_MAX)) ? TRUE: FALSE)

	/** Validate the RTS threshold value */
	#define IS_VALID_RTS_THRESHOLD(x) (((x >= RTS_THRESHOLD_MIN) && (x <= RTS_THRESHOLD_MAX)) ? TRUE: FALSE)

	/** Validate the GTK */
	#define IS_VALID_GTK(x) ((x >= GTK_MIN) ? TRUE: FALSE)

	/** Validate the intra-bss forwarding status */
	#define IS_VALID_INTRA_BSS_STATUS(x) (((x == ENABLE) \|\| (x == DISABLE)) ? TRUE: FALSE)

	/** Validate the protection flag */
	#define IS_VALID_PROTECTION(x) (((x == ENABLE) \|\| (x == DISABLE)) ? TRUE: FALSE)

	/** Validate the UUID length */
	#define IS_VALID_UUID_LEN(x) (((x >= MIN_UUID_LEN) && (x <= MAX_UUID_LEN)) ? TRUE : FALSE)

	/** Validate the device name length */
	#define IS_VALID_DEVICENAME_LEN(x) (((x >= MIN_DEVICENAME_LEN) && (x <= MAX_DEVICENAME_LEN)) ? TRUE : FALSE)

	/** Validate the Manufacturer length */
	#define IS_VALID_MANUFACTURER_LEN(x) (((x >= MIN_MANUFACTURER_LEN) && (x <= MAX_MANUFACTURER_LEN)) ? TRUE : FALSE)

	/** Validate the Model name length */
	#define IS_VALID_MODELNAME_LEN(x) (((x >= MIN_MODELNAME_LEN) && (x <= MAX_MODELNAME_LEN)) ? TRUE : FALSE)

	/** Validate the Model number length */
	#define IS_VALID_MODELNUM_LEN(x) (((x >= MIN_MODELNUM_LEN) && (x <= MAX_MODELNUM_LEN)) ? TRUE : FALSE)

	/** Validate the Model serial number length */
	#define IS_VALID_SERIALNUM_LEN(x) (((x >= MIN_SERIALNUM_LEN) && (x <= MAX_SERIALNUM_LEN)) ? TRUE : FALSE)

	/** Validate the Primary device type length */
	#define IS_VALID_DEV_TYPE_LEN(x) (((x >= MIN_DEV_TYPE_LEN) && (x <= MAX_DEV_TYPE_LEN)) ? TRUE : FALSE)

	/** Validate the OS version length */
	#define IS_VALID_OS_VERSION_LEN(x) (((x >= MIN_OS_VERSION_LEN) && (x <= MAX_OS_VERSION_LEN)) ? TRUE : FALSE)

	/** Validate the friendly name length */
	#define IS_VALID_FRIENDLY_NAME_LEN(x) (((x >= MIN_FRIENDLY_NAME_LEN) && (x <= MAX_FRIENDLY_NAME_LEN)) ? TRUE : FALSE)

	/** Validate the URL length */
	#define IS_VALID_URL_LEN(x) (((x > 0) && (x <= MAX_URL_LEN)) ? TRUE : FALSE)

	/** Validate the model description length */
	#define IS_VALID_MODEL_DESC_LEN(x) (((x > MIN_MODEL_DESC_LEN) && (x <= MAX_MODEL_DESC_LEN)) ? TRUE : FALSE)

	/** Validate the Universal Product Code (UPC) length */
	#define IS_VALID_UPC_LEN(x) (((x > MIN_UPC_LEN) && (x <= MAX_UPC_LEN)) ? TRUE : FALSE)

	/** Validate the Tx power index */
	#define IS_VALID_TX_POWER(x) (((x >= MIN_TX_POWER ) && (x <= MAX_TX_POWER)) ? TRUE : FALSE)

	/** Validate the Data rate */
	#define IS_VALID_DATA_RATE_IDX(x) (((x >= MIN_DATA_RATE_IDX) && (x <= MAX_DATA_RATE_IDX)) ? TRUE : FALSE )

	/** Validate WPS config */
	#define IS_VALID_WPS_CONFIG(x) (((x == WPS_CONFIG_PBC) \|\| (x == WPS_CONFIG_PIN)) ? TRUE : FALSE)

	/** Validate the 802dot11d state */
	#define IS_VALID_802DOT11D_STATE(x) (((x == ENABLE) \|\| (x == DISABLE)) ? TRUE: FALSE)

	/** Validate the AP shutoff time */
	#define IS_VALID_APSHUTOFFTIME(x) (((x >= AP_SHUTOFF_MIN) && (x <= AP_SHUTOFF_MAX)) ? TRUE : FALSE)

	/** Validate the AP shutoff time */
	#define IS_VALID_ENERGY_DETECT_TH(x) ((((x >= AP_ENERGY_DETECT_TH_MIN) && (x <= AP_ENERGY_DETECT_TH_MAX)) \|\|( x == 128)) ? TRUE : FALSE)

	/** Validate the 802dot11h state */
	#define IS_VALID_DFS_STATE(x) (((x == ENABLE) \|\| (x == DISABLE)) ? TRUE: FALSE)

	/** Function declartion */
	int qsap_hostd_exec(int argc, char ** argv);
	void qsap_hostd_exec_cmd(s8 pcmd, s8 presp, u32 *plen);
	s8 qsap_get_config_value(s8 pfile, struct Command pcmd, s8 pbuf, u32 *plen);
	int qsapsetSoftap(int argc, char *argv[]);
	int qsap_add_or_remove_interface(const char *iface_name, int create_iface);
	void qsap_del_ctrl_iface(void);
	s16 wifi_qsap_reset_to_default(s8 pcfgfile, s8 pdefault);
	void check_for_configuration_files(void);
	void qsap_set_ini_filename(void);
	int qsap_set_channel_range(s8 * cmd);
	int qsap_get_sap_auto_channel_slection(s32 *pautochan);
	int qsap_get_mode(s32 *pmode);
	int qsap_prepare_softap(void);
	int qsap_unprepare_softap(void);
	int qsap_is_fst_enabled(void);
	int qsap_control_bridge(int argc, char ** argv);
	int linux_get_ifhwaddr(const char ifname, char addr);

	#if __cplusplus
	}; // extern "C"
	#endif

	#endif