| // | 
 | // Copyright (C) 2012 The Android Open Source Project | 
 | // | 
 | // Licensed under the Apache License, Version 2.0 (the "License"); | 
 | // you may not use this file except in compliance with the License. | 
 | // You may obtain a copy of the License at | 
 | // | 
 | //      http://www.apache.org/licenses/LICENSE-2.0 | 
 | // | 
 | // Unless required by applicable law or agreed to in writing, software | 
 | // distributed under the License is distributed on an "AS IS" BASIS, | 
 | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 | // See the License for the specific language governing permissions and | 
 | // limitations under the License. | 
 | // | 
 |  | 
 | #include "update_engine/payload_state.h" | 
 |  | 
 | #include <algorithm> | 
 | #include <string> | 
 |  | 
 | #include <base/logging.h> | 
 | #include <base/strings/string_util.h> | 
 | #include <base/strings/stringprintf.h> | 
 | #include <metrics/metrics_library.h> | 
 | #include <policy/device_policy.h> | 
 |  | 
 | #include "update_engine/common/clock.h" | 
 | #include "update_engine/common/constants.h" | 
 | #include "update_engine/common/hardware_interface.h" | 
 | #include "update_engine/common/prefs.h" | 
 | #include "update_engine/common/utils.h" | 
 | #include "update_engine/metrics_utils.h" | 
 | #include "update_engine/omaha_request_params.h" | 
 | #include "update_engine/payload_consumer/install_plan.h" | 
 | #include "update_engine/system_state.h" | 
 |  | 
 | using base::Time; | 
 | using base::TimeDelta; | 
 | using std::min; | 
 | using std::string; | 
 |  | 
 | namespace chromeos_update_engine { | 
 |  | 
 | const TimeDelta PayloadState::kDurationSlack = TimeDelta::FromSeconds(600); | 
 |  | 
 | // We want to upperbound backoffs to 16 days | 
 | static const int kMaxBackoffDays = 16; | 
 |  | 
 | // We want to randomize retry attempts after the backoff by +/- 6 hours. | 
 | static const uint32_t kMaxBackoffFuzzMinutes = 12 * 60; | 
 |  | 
 | PayloadState::PayloadState() | 
 |     : prefs_(nullptr), | 
 |       using_p2p_for_downloading_(false), | 
 |       p2p_num_attempts_(0), | 
 |       payload_attempt_number_(0), | 
 |       full_payload_attempt_number_(0), | 
 |       url_index_(0), | 
 |       url_failure_count_(0), | 
 |       url_switch_count_(0), | 
 |       attempt_num_bytes_downloaded_(0), | 
 |       attempt_connection_type_(metrics::ConnectionType::kUnknown), | 
 |       attempt_type_(AttemptType::kUpdate) { | 
 |   for (int i = 0; i <= kNumDownloadSources; i++) | 
 |     total_bytes_downloaded_[i] = current_bytes_downloaded_[i] = 0; | 
 | } | 
 |  | 
 | bool PayloadState::Initialize(SystemState* system_state) { | 
 |   system_state_ = system_state; | 
 |   prefs_ = system_state_->prefs(); | 
 |   powerwash_safe_prefs_ = system_state_->powerwash_safe_prefs(); | 
 |   LoadResponseSignature(); | 
 |   LoadPayloadAttemptNumber(); | 
 |   LoadFullPayloadAttemptNumber(); | 
 |   LoadUrlIndex(); | 
 |   LoadUrlFailureCount(); | 
 |   LoadUrlSwitchCount(); | 
 |   LoadBackoffExpiryTime(); | 
 |   LoadUpdateTimestampStart(); | 
 |   // The LoadUpdateDurationUptime() method relies on LoadUpdateTimestampStart() | 
 |   // being called before it. Don't reorder. | 
 |   LoadUpdateDurationUptime(); | 
 |   for (int i = 0; i < kNumDownloadSources; i++) { | 
 |     DownloadSource source = static_cast<DownloadSource>(i); | 
 |     LoadCurrentBytesDownloaded(source); | 
 |     LoadTotalBytesDownloaded(source); | 
 |   } | 
 |   LoadNumReboots(); | 
 |   LoadNumResponsesSeen(); | 
 |   LoadRollbackVersion(); | 
 |   LoadP2PFirstAttemptTimestamp(); | 
 |   LoadP2PNumAttempts(); | 
 |   return true; | 
 | } | 
 |  | 
 | void PayloadState::SetResponse(const OmahaResponse& omaha_response) { | 
 |   // Always store the latest response. | 
 |   response_ = omaha_response; | 
 |  | 
 |   // Compute the candidate URLs first as they are used to calculate the | 
 |   // response signature so that a change in enterprise policy for | 
 |   // HTTP downloads being enabled or not could be honored as soon as the | 
 |   // next update check happens. | 
 |   ComputeCandidateUrls(); | 
 |  | 
 |   // Check if the "signature" of this response (i.e. the fields we care about) | 
 |   // has changed. | 
 |   string new_response_signature = CalculateResponseSignature(); | 
 |   bool has_response_changed = (response_signature_ != new_response_signature); | 
 |  | 
 |   // If the response has changed, we should persist the new signature and | 
 |   // clear away all the existing state. | 
 |   if (has_response_changed) { | 
 |     LOG(INFO) << "Resetting all persisted state as this is a new response"; | 
 |     SetNumResponsesSeen(num_responses_seen_ + 1); | 
 |     SetResponseSignature(new_response_signature); | 
 |     ResetPersistedState(); | 
 |     return; | 
 |   } | 
 |  | 
 |   // This is the earliest point at which we can validate whether the URL index | 
 |   // we loaded from the persisted state is a valid value. If the response | 
 |   // hasn't changed but the URL index is invalid, it's indicative of some | 
 |   // tampering of the persisted state. | 
 |   if (static_cast<uint32_t>(url_index_) >= candidate_urls_.size()) { | 
 |     LOG(INFO) << "Resetting all payload state as the url index seems to have " | 
 |                  "been tampered with"; | 
 |     ResetPersistedState(); | 
 |     return; | 
 |   } | 
 |  | 
 |   // Update the current download source which depends on the latest value of | 
 |   // the response. | 
 |   UpdateCurrentDownloadSource(); | 
 | } | 
 |  | 
 | void PayloadState::SetUsingP2PForDownloading(bool value) { | 
 |   using_p2p_for_downloading_ = value; | 
 |   // Update the current download source which depends on whether we are | 
 |   // using p2p or not. | 
 |   UpdateCurrentDownloadSource(); | 
 | } | 
 |  | 
 | void PayloadState::DownloadComplete() { | 
 |   LOG(INFO) << "Payload downloaded successfully"; | 
 |   IncrementPayloadAttemptNumber(); | 
 |   IncrementFullPayloadAttemptNumber(); | 
 | } | 
 |  | 
 | void PayloadState::DownloadProgress(size_t count) { | 
 |   if (count == 0) | 
 |     return; | 
 |  | 
 |   CalculateUpdateDurationUptime(); | 
 |   UpdateBytesDownloaded(count); | 
 |  | 
 |   // We've received non-zero bytes from a recent download operation.  Since our | 
 |   // URL failure count is meant to penalize a URL only for consecutive | 
 |   // failures, downloading bytes successfully means we should reset the failure | 
 |   // count (as we know at least that the URL is working). In future, we can | 
 |   // design this to be more sophisticated to check for more intelligent failure | 
 |   // patterns, but right now, even 1 byte downloaded will mark the URL to be | 
 |   // good unless it hits 10 (or configured number of) consecutive failures | 
 |   // again. | 
 |  | 
 |   if (GetUrlFailureCount() == 0) | 
 |     return; | 
 |  | 
 |   LOG(INFO) << "Resetting failure count of Url" << GetUrlIndex() | 
 |             << " to 0 as we received " << count << " bytes successfully"; | 
 |   SetUrlFailureCount(0); | 
 | } | 
 |  | 
 | void PayloadState::AttemptStarted(AttemptType attempt_type) { | 
 |   // Flush previous state from abnormal attempt failure, if any. | 
 |   ReportAndClearPersistedAttemptMetrics(); | 
 |  | 
 |   attempt_type_ = attempt_type; | 
 |  | 
 |   ClockInterface *clock = system_state_->clock(); | 
 |   attempt_start_time_boot_ = clock->GetBootTime(); | 
 |   attempt_start_time_monotonic_ = clock->GetMonotonicTime(); | 
 |   attempt_num_bytes_downloaded_ = 0; | 
 |  | 
 |   metrics::ConnectionType type; | 
 |   NetworkConnectionType network_connection_type; | 
 |   NetworkTethering tethering; | 
 |   ConnectionManagerInterface* connection_manager = | 
 |       system_state_->connection_manager(); | 
 |   if (!connection_manager->GetConnectionProperties(&network_connection_type, | 
 |                                                    &tethering)) { | 
 |     LOG(ERROR) << "Failed to determine connection type."; | 
 |     type = metrics::ConnectionType::kUnknown; | 
 |   } else { | 
 |     type = metrics_utils::GetConnectionType(network_connection_type, tethering); | 
 |   } | 
 |   attempt_connection_type_ = type; | 
 |  | 
 |   if (attempt_type == AttemptType::kUpdate) | 
 |     PersistAttemptMetrics(); | 
 | } | 
 |  | 
 | void PayloadState::UpdateResumed() { | 
 |   LOG(INFO) << "Resuming an update that was previously started."; | 
 |   UpdateNumReboots(); | 
 |   AttemptStarted(AttemptType::kUpdate); | 
 | } | 
 |  | 
 | void PayloadState::UpdateRestarted() { | 
 |   LOG(INFO) << "Starting a new update"; | 
 |   ResetDownloadSourcesOnNewUpdate(); | 
 |   SetNumReboots(0); | 
 |   AttemptStarted(AttemptType::kUpdate); | 
 | } | 
 |  | 
 | void PayloadState::UpdateSucceeded() { | 
 |   // Send the relevant metrics that are tracked in this class to UMA. | 
 |   CalculateUpdateDurationUptime(); | 
 |   SetUpdateTimestampEnd(system_state_->clock()->GetWallclockTime()); | 
 |  | 
 |   switch (attempt_type_) { | 
 |     case AttemptType::kUpdate: | 
 |       CollectAndReportAttemptMetrics(ErrorCode::kSuccess); | 
 |       CollectAndReportSuccessfulUpdateMetrics(); | 
 |       ClearPersistedAttemptMetrics(); | 
 |       break; | 
 |  | 
 |     case AttemptType::kRollback: | 
 |       metrics::ReportRollbackMetrics(system_state_, | 
 |                                      metrics::RollbackResult::kSuccess); | 
 |       break; | 
 |   } | 
 |  | 
 |   // Reset the number of responses seen since it counts from the last | 
 |   // successful update, e.g. now. | 
 |   SetNumResponsesSeen(0); | 
 |  | 
 |   CreateSystemUpdatedMarkerFile(); | 
 | } | 
 |  | 
 | void PayloadState::UpdateFailed(ErrorCode error) { | 
 |   ErrorCode base_error = utils::GetBaseErrorCode(error); | 
 |   LOG(INFO) << "Updating payload state for error code: " << base_error | 
 |             << " (" << utils::CodeToString(base_error) << ")"; | 
 |  | 
 |   if (candidate_urls_.size() == 0) { | 
 |     // This means we got this error even before we got a valid Omaha response | 
 |     // or don't have any valid candidates in the Omaha response. | 
 |     // So we should not advance the url_index_ in such cases. | 
 |     LOG(INFO) << "Ignoring failures until we get a valid Omaha response."; | 
 |     return; | 
 |   } | 
 |  | 
 |   switch (attempt_type_) { | 
 |     case AttemptType::kUpdate: | 
 |       CollectAndReportAttemptMetrics(base_error); | 
 |       ClearPersistedAttemptMetrics(); | 
 |       break; | 
 |  | 
 |     case AttemptType::kRollback: | 
 |       metrics::ReportRollbackMetrics(system_state_, | 
 |                                      metrics::RollbackResult::kFailed); | 
 |       break; | 
 |   } | 
 |  | 
 |   switch (base_error) { | 
 |     // Errors which are good indicators of a problem with a particular URL or | 
 |     // the protocol used in the URL or entities in the communication channel | 
 |     // (e.g. proxies). We should try the next available URL in the next update | 
 |     // check to quickly recover from these errors. | 
 |     case ErrorCode::kPayloadHashMismatchError: | 
 |     case ErrorCode::kPayloadSizeMismatchError: | 
 |     case ErrorCode::kDownloadPayloadVerificationError: | 
 |     case ErrorCode::kDownloadPayloadPubKeyVerificationError: | 
 |     case ErrorCode::kSignedDeltaPayloadExpectedError: | 
 |     case ErrorCode::kDownloadInvalidMetadataMagicString: | 
 |     case ErrorCode::kDownloadSignatureMissingInManifest: | 
 |     case ErrorCode::kDownloadManifestParseError: | 
 |     case ErrorCode::kDownloadMetadataSignatureError: | 
 |     case ErrorCode::kDownloadMetadataSignatureVerificationError: | 
 |     case ErrorCode::kDownloadMetadataSignatureMismatch: | 
 |     case ErrorCode::kDownloadOperationHashVerificationError: | 
 |     case ErrorCode::kDownloadOperationExecutionError: | 
 |     case ErrorCode::kDownloadOperationHashMismatch: | 
 |     case ErrorCode::kDownloadInvalidMetadataSize: | 
 |     case ErrorCode::kDownloadInvalidMetadataSignature: | 
 |     case ErrorCode::kDownloadOperationHashMissingError: | 
 |     case ErrorCode::kDownloadMetadataSignatureMissingError: | 
 |     case ErrorCode::kPayloadMismatchedType: | 
 |     case ErrorCode::kUnsupportedMajorPayloadVersion: | 
 |     case ErrorCode::kUnsupportedMinorPayloadVersion: | 
 |       IncrementUrlIndex(); | 
 |       break; | 
 |  | 
 |     // Errors which seem to be just transient network/communication related | 
 |     // failures and do not indicate any inherent problem with the URL itself. | 
 |     // So, we should keep the current URL but just increment the | 
 |     // failure count to give it more chances. This way, while we maximize our | 
 |     // chances of downloading from the URLs that appear earlier in the response | 
 |     // (because download from a local server URL that appears earlier in a | 
 |     // response is preferable than downloading from the next URL which could be | 
 |     // a internet URL and thus could be more expensive). | 
 |  | 
 |     case ErrorCode::kError: | 
 |     case ErrorCode::kDownloadTransferError: | 
 |     case ErrorCode::kDownloadWriteError: | 
 |     case ErrorCode::kDownloadStateInitializationError: | 
 |     case ErrorCode::kOmahaErrorInHTTPResponse:  // Aggregate for HTTP errors. | 
 |       IncrementFailureCount(); | 
 |       break; | 
 |  | 
 |     // Errors which are not specific to a URL and hence shouldn't result in | 
 |     // the URL being penalized. This can happen in two cases: | 
 |     // 1. We haven't started downloading anything: These errors don't cost us | 
 |     // anything in terms of actual payload bytes, so we should just do the | 
 |     // regular retries at the next update check. | 
 |     // 2. We have successfully downloaded the payload: In this case, the | 
 |     // payload attempt number would have been incremented and would take care | 
 |     // of the backoff at the next update check. | 
 |     // In either case, there's no need to update URL index or failure count. | 
 |     case ErrorCode::kOmahaRequestError: | 
 |     case ErrorCode::kOmahaResponseHandlerError: | 
 |     case ErrorCode::kPostinstallRunnerError: | 
 |     case ErrorCode::kFilesystemCopierError: | 
 |     case ErrorCode::kInstallDeviceOpenError: | 
 |     case ErrorCode::kKernelDeviceOpenError: | 
 |     case ErrorCode::kDownloadNewPartitionInfoError: | 
 |     case ErrorCode::kNewRootfsVerificationError: | 
 |     case ErrorCode::kNewKernelVerificationError: | 
 |     case ErrorCode::kPostinstallBootedFromFirmwareB: | 
 |     case ErrorCode::kPostinstallFirmwareRONotUpdatable: | 
 |     case ErrorCode::kOmahaRequestEmptyResponseError: | 
 |     case ErrorCode::kOmahaRequestXMLParseError: | 
 |     case ErrorCode::kOmahaResponseInvalid: | 
 |     case ErrorCode::kOmahaUpdateIgnoredPerPolicy: | 
 |     case ErrorCode::kOmahaUpdateDeferredPerPolicy: | 
 |     case ErrorCode::kOmahaUpdateDeferredForBackoff: | 
 |     case ErrorCode::kPostinstallPowerwashError: | 
 |     case ErrorCode::kUpdateCanceledByChannelChange: | 
 |     case ErrorCode::kOmahaRequestXMLHasEntityDecl: | 
 |     case ErrorCode::kFilesystemVerifierError: | 
 |       LOG(INFO) << "Not incrementing URL index or failure count for this error"; | 
 |       break; | 
 |  | 
 |     case ErrorCode::kSuccess:                            // success code | 
 |     case ErrorCode::kUmaReportedMax:                     // not an error code | 
 |     case ErrorCode::kOmahaRequestHTTPResponseBase:       // aggregated already | 
 |     case ErrorCode::kDevModeFlag:                       // not an error code | 
 |     case ErrorCode::kResumedFlag:                        // not an error code | 
 |     case ErrorCode::kTestImageFlag:                      // not an error code | 
 |     case ErrorCode::kTestOmahaUrlFlag:                   // not an error code | 
 |     case ErrorCode::kSpecialFlags:                       // not an error code | 
 |       // These shouldn't happen. Enumerating these  explicitly here so that we | 
 |       // can let the compiler warn about new error codes that are added to | 
 |       // action_processor.h but not added here. | 
 |       LOG(WARNING) << "Unexpected error code for UpdateFailed"; | 
 |       break; | 
 |  | 
 |     // Note: Not adding a default here so as to let the compiler warn us of | 
 |     // any new enums that were added in the .h but not listed in this switch. | 
 |   } | 
 | } | 
 |  | 
 | bool PayloadState::ShouldBackoffDownload() { | 
 |   if (response_.disable_payload_backoff) { | 
 |     LOG(INFO) << "Payload backoff logic is disabled. " | 
 |                  "Can proceed with the download"; | 
 |     return false; | 
 |   } | 
 |   if (GetUsingP2PForDownloading() && !GetP2PUrl().empty()) { | 
 |     LOG(INFO) << "Payload backoff logic is disabled because download " | 
 |               << "will happen from local peer (via p2p)."; | 
 |     return false; | 
 |   } | 
 |   if (system_state_->request_params()->interactive()) { | 
 |     LOG(INFO) << "Payload backoff disabled for interactive update checks."; | 
 |     return false; | 
 |   } | 
 |   if (response_.is_delta_payload) { | 
 |     // If delta payloads fail, we want to fallback quickly to full payloads as | 
 |     // they are more likely to succeed. Exponential backoffs would greatly | 
 |     // slow down the fallback to full payloads.  So we don't backoff for delta | 
 |     // payloads. | 
 |     LOG(INFO) << "No backoffs for delta payloads. " | 
 |               << "Can proceed with the download"; | 
 |     return false; | 
 |   } | 
 |  | 
 |   if (!system_state_->hardware()->IsOfficialBuild()) { | 
 |     // Backoffs are needed only for official builds. We do not want any delays | 
 |     // or update failures due to backoffs during testing or development. | 
 |     LOG(INFO) << "No backoffs for test/dev images. " | 
 |               << "Can proceed with the download"; | 
 |     return false; | 
 |   } | 
 |  | 
 |   if (backoff_expiry_time_.is_null()) { | 
 |     LOG(INFO) << "No backoff expiry time has been set. " | 
 |               << "Can proceed with the download"; | 
 |     return false; | 
 |   } | 
 |  | 
 |   if (backoff_expiry_time_ < Time::Now()) { | 
 |     LOG(INFO) << "The backoff expiry time (" | 
 |               << utils::ToString(backoff_expiry_time_) | 
 |               << ") has elapsed. Can proceed with the download"; | 
 |     return false; | 
 |   } | 
 |  | 
 |   LOG(INFO) << "Cannot proceed with downloads as we need to backoff until " | 
 |             << utils::ToString(backoff_expiry_time_); | 
 |   return true; | 
 | } | 
 |  | 
 | void PayloadState::Rollback() { | 
 |   SetRollbackVersion(system_state_->request_params()->app_version()); | 
 |   AttemptStarted(AttemptType::kRollback); | 
 | } | 
 |  | 
 | void PayloadState::IncrementPayloadAttemptNumber() { | 
 |   // Update the payload attempt number for both payload types: full and delta. | 
 |   SetPayloadAttemptNumber(GetPayloadAttemptNumber() + 1); | 
 | } | 
 |  | 
 | void PayloadState::IncrementFullPayloadAttemptNumber() { | 
 |   // Update the payload attempt number for full payloads and the backoff time. | 
 |   if (response_.is_delta_payload) { | 
 |     LOG(INFO) << "Not incrementing payload attempt number for delta payloads"; | 
 |     return; | 
 |   } | 
 |  | 
 |   LOG(INFO) << "Incrementing the full payload attempt number"; | 
 |   SetFullPayloadAttemptNumber(GetFullPayloadAttemptNumber() + 1); | 
 |   UpdateBackoffExpiryTime(); | 
 | } | 
 |  | 
 | void PayloadState::IncrementUrlIndex() { | 
 |   uint32_t next_url_index = GetUrlIndex() + 1; | 
 |   if (next_url_index < candidate_urls_.size()) { | 
 |     LOG(INFO) << "Incrementing the URL index for next attempt"; | 
 |     SetUrlIndex(next_url_index); | 
 |   } else { | 
 |     LOG(INFO) << "Resetting the current URL index (" << GetUrlIndex() << ") to " | 
 |               << "0 as we only have " << candidate_urls_.size() | 
 |               << " candidate URL(s)"; | 
 |     SetUrlIndex(0); | 
 |     IncrementPayloadAttemptNumber(); | 
 |     IncrementFullPayloadAttemptNumber(); | 
 |   } | 
 |  | 
 |   // If we have multiple URLs, record that we just switched to another one | 
 |   if (candidate_urls_.size() > 1) | 
 |     SetUrlSwitchCount(url_switch_count_ + 1); | 
 |  | 
 |   // Whenever we update the URL index, we should also clear the URL failure | 
 |   // count so we can start over fresh for the new URL. | 
 |   SetUrlFailureCount(0); | 
 | } | 
 |  | 
 | void PayloadState::IncrementFailureCount() { | 
 |   uint32_t next_url_failure_count = GetUrlFailureCount() + 1; | 
 |   if (next_url_failure_count < response_.max_failure_count_per_url) { | 
 |     LOG(INFO) << "Incrementing the URL failure count"; | 
 |     SetUrlFailureCount(next_url_failure_count); | 
 |   } else { | 
 |     LOG(INFO) << "Reached max number of failures for Url" << GetUrlIndex() | 
 |               << ". Trying next available URL"; | 
 |     IncrementUrlIndex(); | 
 |   } | 
 | } | 
 |  | 
 | void PayloadState::UpdateBackoffExpiryTime() { | 
 |   if (response_.disable_payload_backoff) { | 
 |     LOG(INFO) << "Resetting backoff expiry time as payload backoff is disabled"; | 
 |     SetBackoffExpiryTime(Time()); | 
 |     return; | 
 |   } | 
 |  | 
 |   if (GetFullPayloadAttemptNumber() == 0) { | 
 |     SetBackoffExpiryTime(Time()); | 
 |     return; | 
 |   } | 
 |  | 
 |   // Since we're doing left-shift below, make sure we don't shift more | 
 |   // than this. E.g. if int is 4-bytes, don't left-shift more than 30 bits, | 
 |   // since we don't expect value of kMaxBackoffDays to be more than 100 anyway. | 
 |   int num_days = 1;  // the value to be shifted. | 
 |   const int kMaxShifts = (sizeof(num_days) * 8) - 2; | 
 |  | 
 |   // Normal backoff days is 2 raised to (payload_attempt_number - 1). | 
 |   // E.g. if payload_attempt_number is over 30, limit power to 30. | 
 |   int power = min(GetFullPayloadAttemptNumber() - 1, kMaxShifts); | 
 |  | 
 |   // The number of days is the minimum of 2 raised to (payload_attempt_number | 
 |   // - 1) or kMaxBackoffDays. | 
 |   num_days = min(num_days << power, kMaxBackoffDays); | 
 |  | 
 |   // We don't want all retries to happen exactly at the same time when | 
 |   // retrying after backoff. So add some random minutes to fuzz. | 
 |   int fuzz_minutes = utils::FuzzInt(0, kMaxBackoffFuzzMinutes); | 
 |   TimeDelta next_backoff_interval = TimeDelta::FromDays(num_days) + | 
 |                                     TimeDelta::FromMinutes(fuzz_minutes); | 
 |   LOG(INFO) << "Incrementing the backoff expiry time by " | 
 |             << utils::FormatTimeDelta(next_backoff_interval); | 
 |   SetBackoffExpiryTime(Time::Now() + next_backoff_interval); | 
 | } | 
 |  | 
 | void PayloadState::UpdateCurrentDownloadSource() { | 
 |   current_download_source_ = kNumDownloadSources; | 
 |  | 
 |   if (using_p2p_for_downloading_) { | 
 |     current_download_source_ = kDownloadSourceHttpPeer; | 
 |   } else if (GetUrlIndex() < candidate_urls_.size())  { | 
 |     string current_url = candidate_urls_[GetUrlIndex()]; | 
 |     if (base::StartsWith(current_url, "https://", | 
 |                          base::CompareCase::INSENSITIVE_ASCII)) { | 
 |       current_download_source_ = kDownloadSourceHttpsServer; | 
 |     } else if (base::StartsWith(current_url, "http://", | 
 |                                 base::CompareCase::INSENSITIVE_ASCII)) { | 
 |       current_download_source_ = kDownloadSourceHttpServer; | 
 |     } | 
 |   } | 
 |  | 
 |   LOG(INFO) << "Current download source: " | 
 |             << utils::ToString(current_download_source_); | 
 | } | 
 |  | 
 | void PayloadState::UpdateBytesDownloaded(size_t count) { | 
 |   SetCurrentBytesDownloaded( | 
 |       current_download_source_, | 
 |       GetCurrentBytesDownloaded(current_download_source_) + count, | 
 |       false); | 
 |   SetTotalBytesDownloaded( | 
 |       current_download_source_, | 
 |       GetTotalBytesDownloaded(current_download_source_) + count, | 
 |       false); | 
 |  | 
 |   attempt_num_bytes_downloaded_ += count; | 
 | } | 
 |  | 
 | PayloadType PayloadState::CalculatePayloadType() { | 
 |   PayloadType payload_type; | 
 |   OmahaRequestParams* params = system_state_->request_params(); | 
 |   if (response_.is_delta_payload) { | 
 |     payload_type = kPayloadTypeDelta; | 
 |   } else if (params->delta_okay()) { | 
 |     payload_type = kPayloadTypeFull; | 
 |   } else {  // Full payload, delta was not allowed by request. | 
 |     payload_type = kPayloadTypeForcedFull; | 
 |   } | 
 |   return payload_type; | 
 | } | 
 |  | 
 | // TODO(zeuthen): Currently we don't report the UpdateEngine.Attempt.* | 
 | // metrics if the attempt ends abnormally, e.g. if the update_engine | 
 | // process crashes or the device is rebooted. See | 
 | // http://crbug.com/357676 | 
 | void PayloadState::CollectAndReportAttemptMetrics(ErrorCode code) { | 
 |   int attempt_number = GetPayloadAttemptNumber(); | 
 |  | 
 |   PayloadType payload_type = CalculatePayloadType(); | 
 |  | 
 |   int64_t payload_size = response_.size; | 
 |  | 
 |   int64_t payload_bytes_downloaded = attempt_num_bytes_downloaded_; | 
 |  | 
 |   ClockInterface *clock = system_state_->clock(); | 
 |   TimeDelta duration = clock->GetBootTime() - attempt_start_time_boot_; | 
 |   TimeDelta duration_uptime = clock->GetMonotonicTime() - | 
 |       attempt_start_time_monotonic_; | 
 |  | 
 |   int64_t payload_download_speed_bps = 0; | 
 |   int64_t usec = duration_uptime.InMicroseconds(); | 
 |   if (usec > 0) { | 
 |     double sec = static_cast<double>(usec) / Time::kMicrosecondsPerSecond; | 
 |     double bps = static_cast<double>(payload_bytes_downloaded) / sec; | 
 |     payload_download_speed_bps = static_cast<int64_t>(bps); | 
 |   } | 
 |  | 
 |   DownloadSource download_source = current_download_source_; | 
 |  | 
 |   metrics::DownloadErrorCode payload_download_error_code = | 
 |     metrics::DownloadErrorCode::kUnset; | 
 |   ErrorCode internal_error_code = ErrorCode::kSuccess; | 
 |   metrics::AttemptResult attempt_result = metrics_utils::GetAttemptResult(code); | 
 |  | 
 |   // Add additional detail to AttemptResult | 
 |   switch (attempt_result) { | 
 |     case metrics::AttemptResult::kPayloadDownloadError: | 
 |       payload_download_error_code = metrics_utils::GetDownloadErrorCode(code); | 
 |       break; | 
 |  | 
 |     case metrics::AttemptResult::kInternalError: | 
 |       internal_error_code = code; | 
 |       break; | 
 |  | 
 |     // Explicit fall-through for cases where we do not have additional | 
 |     // detail. We avoid the default keyword to force people adding new | 
 |     // AttemptResult values to visit this code and examine whether | 
 |     // additional detail is needed. | 
 |     case metrics::AttemptResult::kUpdateSucceeded: | 
 |     case metrics::AttemptResult::kMetadataMalformed: | 
 |     case metrics::AttemptResult::kOperationMalformed: | 
 |     case metrics::AttemptResult::kOperationExecutionError: | 
 |     case metrics::AttemptResult::kMetadataVerificationFailed: | 
 |     case metrics::AttemptResult::kPayloadVerificationFailed: | 
 |     case metrics::AttemptResult::kVerificationFailed: | 
 |     case metrics::AttemptResult::kPostInstallFailed: | 
 |     case metrics::AttemptResult::kAbnormalTermination: | 
 |     case metrics::AttemptResult::kNumConstants: | 
 |     case metrics::AttemptResult::kUnset: | 
 |       break; | 
 |   } | 
 |  | 
 |   metrics::ReportUpdateAttemptMetrics(system_state_, | 
 |                                       attempt_number, | 
 |                                       payload_type, | 
 |                                       duration, | 
 |                                       duration_uptime, | 
 |                                       payload_size, | 
 |                                       payload_bytes_downloaded, | 
 |                                       payload_download_speed_bps, | 
 |                                       download_source, | 
 |                                       attempt_result, | 
 |                                       internal_error_code, | 
 |                                       payload_download_error_code, | 
 |                                       attempt_connection_type_); | 
 | } | 
 |  | 
 | void PayloadState::PersistAttemptMetrics() { | 
 |   // TODO(zeuthen): For now we only persist whether an attempt was in | 
 |   // progress and not values/metrics related to the attempt. This | 
 |   // means that when this happens, of all the UpdateEngine.Attempt.* | 
 |   // metrics, only UpdateEngine.Attempt.Result is reported (with the | 
 |   // value |kAbnormalTermination|). In the future we might want to | 
 |   // persist more data so we can report other metrics in the | 
 |   // UpdateEngine.Attempt.* namespace when this happens. | 
 |   prefs_->SetBoolean(kPrefsAttemptInProgress, true); | 
 | } | 
 |  | 
 | void PayloadState::ClearPersistedAttemptMetrics() { | 
 |   prefs_->Delete(kPrefsAttemptInProgress); | 
 | } | 
 |  | 
 | void PayloadState::ReportAndClearPersistedAttemptMetrics() { | 
 |   bool attempt_in_progress = false; | 
 |   if (!prefs_->GetBoolean(kPrefsAttemptInProgress, &attempt_in_progress)) | 
 |     return; | 
 |   if (!attempt_in_progress) | 
 |     return; | 
 |  | 
 |   metrics::ReportAbnormallyTerminatedUpdateAttemptMetrics(system_state_); | 
 |  | 
 |   ClearPersistedAttemptMetrics(); | 
 | } | 
 |  | 
 | void PayloadState::CollectAndReportSuccessfulUpdateMetrics() { | 
 |   string metric; | 
 |  | 
 |   // Report metrics collected from all known download sources to UMA. | 
 |   int64_t total_bytes_by_source[kNumDownloadSources]; | 
 |   int64_t successful_bytes = 0; | 
 |   int64_t total_bytes = 0; | 
 |   int64_t successful_mbs = 0; | 
 |   int64_t total_mbs = 0; | 
 |  | 
 |   for (int i = 0; i < kNumDownloadSources; i++) { | 
 |     DownloadSource source = static_cast<DownloadSource>(i); | 
 |     int64_t bytes; | 
 |  | 
 |     // Only consider this download source (and send byte counts) as | 
 |     // having been used if we downloaded a non-trivial amount of bytes | 
 |     // (e.g. at least 1 MiB) that contributed to the final success of | 
 |     // the update. Otherwise we're going to end up with a lot of | 
 |     // zero-byte events in the histogram. | 
 |  | 
 |     bytes = GetCurrentBytesDownloaded(source); | 
 |     successful_bytes += bytes; | 
 |     successful_mbs += bytes / kNumBytesInOneMiB; | 
 |     SetCurrentBytesDownloaded(source, 0, true); | 
 |  | 
 |     bytes = GetTotalBytesDownloaded(source); | 
 |     total_bytes_by_source[i] = bytes; | 
 |     total_bytes += bytes; | 
 |     total_mbs += bytes / kNumBytesInOneMiB; | 
 |     SetTotalBytesDownloaded(source, 0, true); | 
 |   } | 
 |  | 
 |   int download_overhead_percentage = 0; | 
 |   if (successful_bytes > 0) { | 
 |     download_overhead_percentage = (total_bytes - successful_bytes) * 100ULL / | 
 |                                    successful_bytes; | 
 |   } | 
 |  | 
 |   int url_switch_count = static_cast<int>(url_switch_count_); | 
 |  | 
 |   int reboot_count = GetNumReboots(); | 
 |  | 
 |   SetNumReboots(0); | 
 |  | 
 |   TimeDelta duration = GetUpdateDuration(); | 
 |  | 
 |   prefs_->Delete(kPrefsUpdateTimestampStart); | 
 |   prefs_->Delete(kPrefsUpdateDurationUptime); | 
 |  | 
 |   PayloadType payload_type = CalculatePayloadType(); | 
 |  | 
 |   int64_t payload_size = response_.size; | 
 |  | 
 |   int attempt_count = GetPayloadAttemptNumber(); | 
 |  | 
 |   int updates_abandoned_count = num_responses_seen_ - 1; | 
 |  | 
 |   metrics::ReportSuccessfulUpdateMetrics(system_state_, | 
 |                                          attempt_count, | 
 |                                          updates_abandoned_count, | 
 |                                          payload_type, | 
 |                                          payload_size, | 
 |                                          total_bytes_by_source, | 
 |                                          download_overhead_percentage, | 
 |                                          duration, | 
 |                                          reboot_count, | 
 |                                          url_switch_count); | 
 | } | 
 |  | 
 | void PayloadState::UpdateNumReboots() { | 
 |   // We only update the reboot count when the system has been detected to have | 
 |   // been rebooted. | 
 |   if (!system_state_->system_rebooted()) { | 
 |     return; | 
 |   } | 
 |  | 
 |   SetNumReboots(GetNumReboots() + 1); | 
 | } | 
 |  | 
 | void PayloadState::SetNumReboots(uint32_t num_reboots) { | 
 |   CHECK(prefs_); | 
 |   num_reboots_ = num_reboots; | 
 |   prefs_->SetInt64(kPrefsNumReboots, num_reboots); | 
 |   LOG(INFO) << "Number of Reboots during current update attempt = " | 
 |             << num_reboots_; | 
 | } | 
 |  | 
 | void PayloadState::ResetPersistedState() { | 
 |   SetPayloadAttemptNumber(0); | 
 |   SetFullPayloadAttemptNumber(0); | 
 |   SetUrlIndex(0); | 
 |   SetUrlFailureCount(0); | 
 |   SetUrlSwitchCount(0); | 
 |   UpdateBackoffExpiryTime();  // This will reset the backoff expiry time. | 
 |   SetUpdateTimestampStart(system_state_->clock()->GetWallclockTime()); | 
 |   SetUpdateTimestampEnd(Time());  // Set to null time | 
 |   SetUpdateDurationUptime(TimeDelta::FromSeconds(0)); | 
 |   ResetDownloadSourcesOnNewUpdate(); | 
 |   ResetRollbackVersion(); | 
 |   SetP2PNumAttempts(0); | 
 |   SetP2PFirstAttemptTimestamp(Time());  // Set to null time | 
 |   SetScatteringWaitPeriod(TimeDelta()); | 
 | } | 
 |  | 
 | void PayloadState::ResetRollbackVersion() { | 
 |   CHECK(powerwash_safe_prefs_); | 
 |   rollback_version_ = ""; | 
 |   powerwash_safe_prefs_->Delete(kPrefsRollbackVersion); | 
 | } | 
 |  | 
 | void PayloadState::ResetDownloadSourcesOnNewUpdate() { | 
 |   for (int i = 0; i < kNumDownloadSources; i++) { | 
 |     DownloadSource source = static_cast<DownloadSource>(i); | 
 |     SetCurrentBytesDownloaded(source, 0, true); | 
 |     // Note: Not resetting the TotalBytesDownloaded as we want that metric | 
 |     // to count the bytes downloaded across various update attempts until | 
 |     // we have successfully applied the update. | 
 |   } | 
 | } | 
 |  | 
 | int64_t PayloadState::GetPersistedValue(const string& key) { | 
 |   CHECK(prefs_); | 
 |   if (!prefs_->Exists(key)) | 
 |     return 0; | 
 |  | 
 |   int64_t stored_value; | 
 |   if (!prefs_->GetInt64(key, &stored_value)) | 
 |     return 0; | 
 |  | 
 |   if (stored_value < 0) { | 
 |     LOG(ERROR) << key << ": Invalid value (" << stored_value | 
 |                << ") in persisted state. Defaulting to 0"; | 
 |     return 0; | 
 |   } | 
 |  | 
 |   return stored_value; | 
 | } | 
 |  | 
 | string PayloadState::CalculateResponseSignature() { | 
 |   string response_sign = base::StringPrintf( | 
 |       "NumURLs = %d\n", static_cast<int>(candidate_urls_.size())); | 
 |  | 
 |   for (size_t i = 0; i < candidate_urls_.size(); i++) | 
 |     response_sign += base::StringPrintf("Candidate Url%d = %s\n", | 
 |                                         static_cast<int>(i), | 
 |                                         candidate_urls_[i].c_str()); | 
 |  | 
 |   response_sign += base::StringPrintf( | 
 |       "Payload Size = %ju\n" | 
 |       "Payload Sha256 Hash = %s\n" | 
 |       "Metadata Size = %ju\n" | 
 |       "Metadata Signature = %s\n" | 
 |       "Is Delta Payload = %d\n" | 
 |       "Max Failure Count Per Url = %d\n" | 
 |       "Disable Payload Backoff = %d\n", | 
 |       static_cast<uintmax_t>(response_.size), | 
 |       response_.hash.c_str(), | 
 |       static_cast<uintmax_t>(response_.metadata_size), | 
 |       response_.metadata_signature.c_str(), | 
 |       response_.is_delta_payload, | 
 |       response_.max_failure_count_per_url, | 
 |       response_.disable_payload_backoff); | 
 |   return response_sign; | 
 | } | 
 |  | 
 | void PayloadState::LoadResponseSignature() { | 
 |   CHECK(prefs_); | 
 |   string stored_value; | 
 |   if (prefs_->Exists(kPrefsCurrentResponseSignature) && | 
 |       prefs_->GetString(kPrefsCurrentResponseSignature, &stored_value)) { | 
 |     SetResponseSignature(stored_value); | 
 |   } | 
 | } | 
 |  | 
 | void PayloadState::SetResponseSignature(const string& response_signature) { | 
 |   CHECK(prefs_); | 
 |   response_signature_ = response_signature; | 
 |   LOG(INFO) << "Current Response Signature = \n" << response_signature_; | 
 |   prefs_->SetString(kPrefsCurrentResponseSignature, response_signature_); | 
 | } | 
 |  | 
 | void PayloadState::LoadPayloadAttemptNumber() { | 
 |   SetPayloadAttemptNumber(GetPersistedValue(kPrefsPayloadAttemptNumber)); | 
 | } | 
 |  | 
 | void PayloadState::LoadFullPayloadAttemptNumber() { | 
 |   SetFullPayloadAttemptNumber(GetPersistedValue( | 
 |       kPrefsFullPayloadAttemptNumber)); | 
 | } | 
 |  | 
 | void PayloadState::SetPayloadAttemptNumber(int payload_attempt_number) { | 
 |   CHECK(prefs_); | 
 |   payload_attempt_number_ = payload_attempt_number; | 
 |   LOG(INFO) << "Payload Attempt Number = " << payload_attempt_number_; | 
 |   prefs_->SetInt64(kPrefsPayloadAttemptNumber, payload_attempt_number_); | 
 | } | 
 |  | 
 | void PayloadState::SetFullPayloadAttemptNumber( | 
 |     int full_payload_attempt_number) { | 
 |   CHECK(prefs_); | 
 |   full_payload_attempt_number_ = full_payload_attempt_number; | 
 |   LOG(INFO) << "Full Payload Attempt Number = " << full_payload_attempt_number_; | 
 |   prefs_->SetInt64(kPrefsFullPayloadAttemptNumber, | 
 |       full_payload_attempt_number_); | 
 | } | 
 |  | 
 | void PayloadState::LoadUrlIndex() { | 
 |   SetUrlIndex(GetPersistedValue(kPrefsCurrentUrlIndex)); | 
 | } | 
 |  | 
 | void PayloadState::SetUrlIndex(uint32_t url_index) { | 
 |   CHECK(prefs_); | 
 |   url_index_ = url_index; | 
 |   LOG(INFO) << "Current URL Index = " << url_index_; | 
 |   prefs_->SetInt64(kPrefsCurrentUrlIndex, url_index_); | 
 |  | 
 |   // Also update the download source, which is purely dependent on the | 
 |   // current URL index alone. | 
 |   UpdateCurrentDownloadSource(); | 
 | } | 
 |  | 
 | void PayloadState::LoadScatteringWaitPeriod() { | 
 |   SetScatteringWaitPeriod( | 
 |       TimeDelta::FromSeconds(GetPersistedValue(kPrefsWallClockWaitPeriod))); | 
 | } | 
 |  | 
 | void PayloadState::SetScatteringWaitPeriod(TimeDelta wait_period) { | 
 |   CHECK(prefs_); | 
 |   scattering_wait_period_ = wait_period; | 
 |   LOG(INFO) << "Scattering Wait Period (seconds) = " | 
 |             << scattering_wait_period_.InSeconds(); | 
 |   if (scattering_wait_period_.InSeconds() > 0) { | 
 |     prefs_->SetInt64(kPrefsWallClockWaitPeriod, | 
 |                      scattering_wait_period_.InSeconds()); | 
 |   } else { | 
 |     prefs_->Delete(kPrefsWallClockWaitPeriod); | 
 |   } | 
 | } | 
 |  | 
 | void PayloadState::LoadUrlSwitchCount() { | 
 |   SetUrlSwitchCount(GetPersistedValue(kPrefsUrlSwitchCount)); | 
 | } | 
 |  | 
 | void PayloadState::SetUrlSwitchCount(uint32_t url_switch_count) { | 
 |   CHECK(prefs_); | 
 |   url_switch_count_ = url_switch_count; | 
 |   LOG(INFO) << "URL Switch Count = " << url_switch_count_; | 
 |   prefs_->SetInt64(kPrefsUrlSwitchCount, url_switch_count_); | 
 | } | 
 |  | 
 | void PayloadState::LoadUrlFailureCount() { | 
 |   SetUrlFailureCount(GetPersistedValue(kPrefsCurrentUrlFailureCount)); | 
 | } | 
 |  | 
 | void PayloadState::SetUrlFailureCount(uint32_t url_failure_count) { | 
 |   CHECK(prefs_); | 
 |   url_failure_count_ = url_failure_count; | 
 |   LOG(INFO) << "Current URL (Url" << GetUrlIndex() | 
 |             << ")'s Failure Count = " << url_failure_count_; | 
 |   prefs_->SetInt64(kPrefsCurrentUrlFailureCount, url_failure_count_); | 
 | } | 
 |  | 
 | void PayloadState::LoadBackoffExpiryTime() { | 
 |   CHECK(prefs_); | 
 |   int64_t stored_value; | 
 |   if (!prefs_->Exists(kPrefsBackoffExpiryTime)) | 
 |     return; | 
 |  | 
 |   if (!prefs_->GetInt64(kPrefsBackoffExpiryTime, &stored_value)) | 
 |     return; | 
 |  | 
 |   Time stored_time = Time::FromInternalValue(stored_value); | 
 |   if (stored_time > Time::Now() + TimeDelta::FromDays(kMaxBackoffDays)) { | 
 |     LOG(ERROR) << "Invalid backoff expiry time (" | 
 |                << utils::ToString(stored_time) | 
 |                << ") in persisted state. Resetting."; | 
 |     stored_time = Time(); | 
 |   } | 
 |   SetBackoffExpiryTime(stored_time); | 
 | } | 
 |  | 
 | void PayloadState::SetBackoffExpiryTime(const Time& new_time) { | 
 |   CHECK(prefs_); | 
 |   backoff_expiry_time_ = new_time; | 
 |   LOG(INFO) << "Backoff Expiry Time = " | 
 |             << utils::ToString(backoff_expiry_time_); | 
 |   prefs_->SetInt64(kPrefsBackoffExpiryTime, | 
 |                    backoff_expiry_time_.ToInternalValue()); | 
 | } | 
 |  | 
 | TimeDelta PayloadState::GetUpdateDuration() { | 
 |   Time end_time = update_timestamp_end_.is_null() | 
 |     ? system_state_->clock()->GetWallclockTime() : | 
 |       update_timestamp_end_; | 
 |   return end_time - update_timestamp_start_; | 
 | } | 
 |  | 
 | void PayloadState::LoadUpdateTimestampStart() { | 
 |   int64_t stored_value; | 
 |   Time stored_time; | 
 |  | 
 |   CHECK(prefs_); | 
 |  | 
 |   Time now = system_state_->clock()->GetWallclockTime(); | 
 |  | 
 |   if (!prefs_->Exists(kPrefsUpdateTimestampStart)) { | 
 |     // The preference missing is not unexpected - in that case, just | 
 |     // use the current time as start time | 
 |     stored_time = now; | 
 |   } else if (!prefs_->GetInt64(kPrefsUpdateTimestampStart, &stored_value)) { | 
 |     LOG(ERROR) << "Invalid UpdateTimestampStart value. Resetting."; | 
 |     stored_time = now; | 
 |   } else { | 
 |     stored_time = Time::FromInternalValue(stored_value); | 
 |   } | 
 |  | 
 |   // Sanity check: If the time read from disk is in the future | 
 |   // (modulo some slack to account for possible NTP drift | 
 |   // adjustments), something is fishy and we should report and | 
 |   // reset. | 
 |   TimeDelta duration_according_to_stored_time = now - stored_time; | 
 |   if (duration_according_to_stored_time < -kDurationSlack) { | 
 |     LOG(ERROR) << "The UpdateTimestampStart value (" | 
 |                << utils::ToString(stored_time) | 
 |                << ") in persisted state is " | 
 |                << utils::FormatTimeDelta(duration_according_to_stored_time) | 
 |                << " in the future. Resetting."; | 
 |     stored_time = now; | 
 |   } | 
 |  | 
 |   SetUpdateTimestampStart(stored_time); | 
 | } | 
 |  | 
 | void PayloadState::SetUpdateTimestampStart(const Time& value) { | 
 |   CHECK(prefs_); | 
 |   update_timestamp_start_ = value; | 
 |   prefs_->SetInt64(kPrefsUpdateTimestampStart, | 
 |                    update_timestamp_start_.ToInternalValue()); | 
 |   LOG(INFO) << "Update Timestamp Start = " | 
 |             << utils::ToString(update_timestamp_start_); | 
 | } | 
 |  | 
 | void PayloadState::SetUpdateTimestampEnd(const Time& value) { | 
 |   update_timestamp_end_ = value; | 
 |   LOG(INFO) << "Update Timestamp End = " | 
 |             << utils::ToString(update_timestamp_end_); | 
 | } | 
 |  | 
 | TimeDelta PayloadState::GetUpdateDurationUptime() { | 
 |   return update_duration_uptime_; | 
 | } | 
 |  | 
 | void PayloadState::LoadUpdateDurationUptime() { | 
 |   int64_t stored_value; | 
 |   TimeDelta stored_delta; | 
 |  | 
 |   CHECK(prefs_); | 
 |  | 
 |   if (!prefs_->Exists(kPrefsUpdateDurationUptime)) { | 
 |     // The preference missing is not unexpected - in that case, just | 
 |     // we'll use zero as the delta | 
 |   } else if (!prefs_->GetInt64(kPrefsUpdateDurationUptime, &stored_value)) { | 
 |     LOG(ERROR) << "Invalid UpdateDurationUptime value. Resetting."; | 
 |     stored_delta = TimeDelta::FromSeconds(0); | 
 |   } else { | 
 |     stored_delta = TimeDelta::FromInternalValue(stored_value); | 
 |   } | 
 |  | 
 |   // Sanity-check: Uptime can never be greater than the wall-clock | 
 |   // difference (modulo some slack). If it is, report and reset | 
 |   // to the wall-clock difference. | 
 |   TimeDelta diff = GetUpdateDuration() - stored_delta; | 
 |   if (diff < -kDurationSlack) { | 
 |     LOG(ERROR) << "The UpdateDurationUptime value (" | 
 |                << utils::FormatTimeDelta(stored_delta) | 
 |                << ") in persisted state is " | 
 |                << utils::FormatTimeDelta(diff) | 
 |                << " larger than the wall-clock delta. Resetting."; | 
 |     stored_delta = update_duration_current_; | 
 |   } | 
 |  | 
 |   SetUpdateDurationUptime(stored_delta); | 
 | } | 
 |  | 
 | void PayloadState::LoadNumReboots() { | 
 |   SetNumReboots(GetPersistedValue(kPrefsNumReboots)); | 
 | } | 
 |  | 
 | void PayloadState::LoadRollbackVersion() { | 
 |   CHECK(powerwash_safe_prefs_); | 
 |   string rollback_version; | 
 |   if (powerwash_safe_prefs_->GetString(kPrefsRollbackVersion, | 
 |                                        &rollback_version)) { | 
 |     SetRollbackVersion(rollback_version); | 
 |   } | 
 | } | 
 |  | 
 | void PayloadState::SetRollbackVersion(const string& rollback_version) { | 
 |   CHECK(powerwash_safe_prefs_); | 
 |   LOG(INFO) << "Blacklisting version "<< rollback_version; | 
 |   rollback_version_ = rollback_version; | 
 |   powerwash_safe_prefs_->SetString(kPrefsRollbackVersion, rollback_version); | 
 | } | 
 |  | 
 | void PayloadState::SetUpdateDurationUptimeExtended(const TimeDelta& value, | 
 |                                                    const Time& timestamp, | 
 |                                                    bool use_logging) { | 
 |   CHECK(prefs_); | 
 |   update_duration_uptime_ = value; | 
 |   update_duration_uptime_timestamp_ = timestamp; | 
 |   prefs_->SetInt64(kPrefsUpdateDurationUptime, | 
 |                    update_duration_uptime_.ToInternalValue()); | 
 |   if (use_logging) { | 
 |     LOG(INFO) << "Update Duration Uptime = " | 
 |               << utils::FormatTimeDelta(update_duration_uptime_); | 
 |   } | 
 | } | 
 |  | 
 | void PayloadState::SetUpdateDurationUptime(const TimeDelta& value) { | 
 |   Time now = system_state_->clock()->GetMonotonicTime(); | 
 |   SetUpdateDurationUptimeExtended(value, now, true); | 
 | } | 
 |  | 
 | void PayloadState::CalculateUpdateDurationUptime() { | 
 |   Time now = system_state_->clock()->GetMonotonicTime(); | 
 |   TimeDelta uptime_since_last_update = now - update_duration_uptime_timestamp_; | 
 |   TimeDelta new_uptime = update_duration_uptime_ + uptime_since_last_update; | 
 |   // We're frequently called so avoid logging this write | 
 |   SetUpdateDurationUptimeExtended(new_uptime, now, false); | 
 | } | 
 |  | 
 | string PayloadState::GetPrefsKey(const string& prefix, DownloadSource source) { | 
 |   return prefix + "-from-" + utils::ToString(source); | 
 | } | 
 |  | 
 | void PayloadState::LoadCurrentBytesDownloaded(DownloadSource source) { | 
 |   string key = GetPrefsKey(kPrefsCurrentBytesDownloaded, source); | 
 |   SetCurrentBytesDownloaded(source, GetPersistedValue(key), true); | 
 | } | 
 |  | 
 | void PayloadState::SetCurrentBytesDownloaded( | 
 |     DownloadSource source, | 
 |     uint64_t current_bytes_downloaded, | 
 |     bool log) { | 
 |   CHECK(prefs_); | 
 |  | 
 |   if (source >= kNumDownloadSources) | 
 |     return; | 
 |  | 
 |   // Update the in-memory value. | 
 |   current_bytes_downloaded_[source] = current_bytes_downloaded; | 
 |  | 
 |   string prefs_key = GetPrefsKey(kPrefsCurrentBytesDownloaded, source); | 
 |   prefs_->SetInt64(prefs_key, current_bytes_downloaded); | 
 |   LOG_IF(INFO, log) << "Current bytes downloaded for " | 
 |                     << utils::ToString(source) << " = " | 
 |                     << GetCurrentBytesDownloaded(source); | 
 | } | 
 |  | 
 | void PayloadState::LoadTotalBytesDownloaded(DownloadSource source) { | 
 |   string key = GetPrefsKey(kPrefsTotalBytesDownloaded, source); | 
 |   SetTotalBytesDownloaded(source, GetPersistedValue(key), true); | 
 | } | 
 |  | 
 | void PayloadState::SetTotalBytesDownloaded( | 
 |     DownloadSource source, | 
 |     uint64_t total_bytes_downloaded, | 
 |     bool log) { | 
 |   CHECK(prefs_); | 
 |  | 
 |   if (source >= kNumDownloadSources) | 
 |     return; | 
 |  | 
 |   // Update the in-memory value. | 
 |   total_bytes_downloaded_[source] = total_bytes_downloaded; | 
 |  | 
 |   // Persist. | 
 |   string prefs_key = GetPrefsKey(kPrefsTotalBytesDownloaded, source); | 
 |   prefs_->SetInt64(prefs_key, total_bytes_downloaded); | 
 |   LOG_IF(INFO, log) << "Total bytes downloaded for " | 
 |                     << utils::ToString(source) << " = " | 
 |                     << GetTotalBytesDownloaded(source); | 
 | } | 
 |  | 
 | void PayloadState::LoadNumResponsesSeen() { | 
 |   SetNumResponsesSeen(GetPersistedValue(kPrefsNumResponsesSeen)); | 
 | } | 
 |  | 
 | void PayloadState::SetNumResponsesSeen(int num_responses_seen) { | 
 |   CHECK(prefs_); | 
 |   num_responses_seen_ = num_responses_seen; | 
 |   LOG(INFO) << "Num Responses Seen = " << num_responses_seen_; | 
 |   prefs_->SetInt64(kPrefsNumResponsesSeen, num_responses_seen_); | 
 | } | 
 |  | 
 | void PayloadState::ComputeCandidateUrls() { | 
 |   bool http_url_ok = true; | 
 |  | 
 |   if (system_state_->hardware()->IsOfficialBuild()) { | 
 |     const policy::DevicePolicy* policy = system_state_->device_policy(); | 
 |     if (policy && policy->GetHttpDownloadsEnabled(&http_url_ok) && !http_url_ok) | 
 |       LOG(INFO) << "Downloads via HTTP Url are not enabled by device policy"; | 
 |   } else { | 
 |     LOG(INFO) << "Allowing HTTP downloads for unofficial builds"; | 
 |     http_url_ok = true; | 
 |   } | 
 |  | 
 |   candidate_urls_.clear(); | 
 |   for (size_t i = 0; i < response_.payload_urls.size(); i++) { | 
 |     string candidate_url = response_.payload_urls[i]; | 
 |     if (base::StartsWith(candidate_url, "http://", | 
 |                          base::CompareCase::INSENSITIVE_ASCII) && | 
 |         !http_url_ok) { | 
 |       continue; | 
 |     } | 
 |     candidate_urls_.push_back(candidate_url); | 
 |     LOG(INFO) << "Candidate Url" << (candidate_urls_.size() - 1) | 
 |               << ": " << candidate_url; | 
 |   } | 
 |  | 
 |   LOG(INFO) << "Found " << candidate_urls_.size() << " candidate URLs " | 
 |             << "out of " << response_.payload_urls.size() << " URLs supplied"; | 
 | } | 
 |  | 
 | void PayloadState::CreateSystemUpdatedMarkerFile() { | 
 |   CHECK(prefs_); | 
 |   int64_t value = system_state_->clock()->GetWallclockTime().ToInternalValue(); | 
 |   prefs_->SetInt64(kPrefsSystemUpdatedMarker, value); | 
 | } | 
 |  | 
 | void PayloadState::BootedIntoUpdate(TimeDelta time_to_reboot) { | 
 |   // Send |time_to_reboot| as a UMA stat. | 
 |   string metric = metrics::kMetricTimeToRebootMinutes; | 
 |   system_state_->metrics_lib()->SendToUMA(metric, | 
 |                                           time_to_reboot.InMinutes(), | 
 |                                           0,         // min: 0 minute | 
 |                                           30*24*60,  // max: 1 month (approx) | 
 |                                           kNumDefaultUmaBuckets); | 
 |   LOG(INFO) << "Uploading " << utils::FormatTimeDelta(time_to_reboot) | 
 |             << " for metric " <<  metric; | 
 | } | 
 |  | 
 | void PayloadState::UpdateEngineStarted() { | 
 |   // Flush previous state from abnormal attempt failure, if any. | 
 |   ReportAndClearPersistedAttemptMetrics(); | 
 |  | 
 |   // Avoid the UpdateEngineStarted actions if this is not the first time we | 
 |   // run the update engine since reboot. | 
 |   if (!system_state_->system_rebooted()) | 
 |     return; | 
 |  | 
 |   // Figure out if we just booted into a new update | 
 |   if (prefs_->Exists(kPrefsSystemUpdatedMarker)) { | 
 |     int64_t stored_value; | 
 |     if (prefs_->GetInt64(kPrefsSystemUpdatedMarker, &stored_value)) { | 
 |       Time system_updated_at = Time::FromInternalValue(stored_value); | 
 |       if (!system_updated_at.is_null()) { | 
 |         TimeDelta time_to_reboot = | 
 |             system_state_->clock()->GetWallclockTime() - system_updated_at; | 
 |         if (time_to_reboot.ToInternalValue() < 0) { | 
 |           LOG(ERROR) << "time_to_reboot is negative - system_updated_at: " | 
 |                      << utils::ToString(system_updated_at); | 
 |         } else { | 
 |           BootedIntoUpdate(time_to_reboot); | 
 |         } | 
 |       } | 
 |     } | 
 |     prefs_->Delete(kPrefsSystemUpdatedMarker); | 
 |   } | 
 |   // Check if it is needed to send metrics about a failed reboot into a new | 
 |   // version. | 
 |   ReportFailedBootIfNeeded(); | 
 | } | 
 |  | 
 | void PayloadState::ReportFailedBootIfNeeded() { | 
 |   // If the kPrefsTargetVersionInstalledFrom is present, a successfully applied | 
 |   // payload was marked as ready immediately before the last reboot, and we | 
 |   // need to check if such payload successfully rebooted or not. | 
 |   if (prefs_->Exists(kPrefsTargetVersionInstalledFrom)) { | 
 |     int64_t installed_from = 0; | 
 |     if (!prefs_->GetInt64(kPrefsTargetVersionInstalledFrom, &installed_from)) { | 
 |       LOG(ERROR) << "Error reading TargetVersionInstalledFrom on reboot."; | 
 |       return; | 
 |     } | 
 |     // Old Chrome OS devices will write 2 or 4 in this setting, with the | 
 |     // partition number. We are now using slot numbers (0 or 1) instead, so | 
 |     // the following comparison will not match if we are comparing an old | 
 |     // partition number against a new slot number, which is the correct outcome | 
 |     // since we successfully booted the new update in that case. If the boot | 
 |     // failed, we will read this value from the same version, so it will always | 
 |     // be compatible. | 
 |     if (installed_from == system_state_->boot_control()->GetCurrentSlot()) { | 
 |       // A reboot was pending, but the chromebook is again in the same | 
 |       // BootDevice where the update was installed from. | 
 |       int64_t target_attempt; | 
 |       if (!prefs_->GetInt64(kPrefsTargetVersionAttempt, &target_attempt)) { | 
 |         LOG(ERROR) << "Error reading TargetVersionAttempt when " | 
 |                       "TargetVersionInstalledFrom was present."; | 
 |         target_attempt = 1; | 
 |       } | 
 |  | 
 |       // Report the UMA metric of the current boot failure. | 
 |       string metric = metrics::kMetricFailedUpdateCount; | 
 |       LOG(INFO) << "Uploading " << target_attempt | 
 |                 << " (count) for metric " <<  metric; | 
 |       system_state_->metrics_lib()->SendToUMA( | 
 |            metric, | 
 |            target_attempt, | 
 |            1,    // min value | 
 |            50,   // max value | 
 |            kNumDefaultUmaBuckets); | 
 |     } else { | 
 |       prefs_->Delete(kPrefsTargetVersionAttempt); | 
 |       prefs_->Delete(kPrefsTargetVersionUniqueId); | 
 |     } | 
 |     prefs_->Delete(kPrefsTargetVersionInstalledFrom); | 
 |   } | 
 | } | 
 |  | 
 | void PayloadState::ExpectRebootInNewVersion(const string& target_version_uid) { | 
 |   // Expect to boot into the new partition in the next reboot setting the | 
 |   // TargetVersion* flags in the Prefs. | 
 |   string stored_target_version_uid; | 
 |   string target_version_id; | 
 |   string target_partition; | 
 |   int64_t target_attempt; | 
 |  | 
 |   if (prefs_->Exists(kPrefsTargetVersionUniqueId) && | 
 |       prefs_->GetString(kPrefsTargetVersionUniqueId, | 
 |                         &stored_target_version_uid) && | 
 |       stored_target_version_uid == target_version_uid) { | 
 |     if (!prefs_->GetInt64(kPrefsTargetVersionAttempt, &target_attempt)) | 
 |       target_attempt = 0; | 
 |   } else { | 
 |     prefs_->SetString(kPrefsTargetVersionUniqueId, target_version_uid); | 
 |     target_attempt = 0; | 
 |   } | 
 |   prefs_->SetInt64(kPrefsTargetVersionAttempt, target_attempt + 1); | 
 |  | 
 |   prefs_->SetInt64(kPrefsTargetVersionInstalledFrom, | 
 |                    system_state_->boot_control()->GetCurrentSlot()); | 
 | } | 
 |  | 
 | void PayloadState::ResetUpdateStatus() { | 
 |   // Remove the TargetVersionInstalledFrom pref so that if the machine is | 
 |   // rebooted the next boot is not flagged as failed to rebooted into the | 
 |   // new applied payload. | 
 |   prefs_->Delete(kPrefsTargetVersionInstalledFrom); | 
 |  | 
 |   // Also decrement the attempt number if it exists. | 
 |   int64_t target_attempt; | 
 |   if (prefs_->GetInt64(kPrefsTargetVersionAttempt, &target_attempt)) | 
 |     prefs_->SetInt64(kPrefsTargetVersionAttempt, target_attempt - 1); | 
 | } | 
 |  | 
 | int PayloadState::GetP2PNumAttempts() { | 
 |   return p2p_num_attempts_; | 
 | } | 
 |  | 
 | void PayloadState::SetP2PNumAttempts(int value) { | 
 |   p2p_num_attempts_ = value; | 
 |   LOG(INFO) << "p2p Num Attempts = " << p2p_num_attempts_; | 
 |   CHECK(prefs_); | 
 |   prefs_->SetInt64(kPrefsP2PNumAttempts, value); | 
 | } | 
 |  | 
 | void PayloadState::LoadP2PNumAttempts() { | 
 |   SetP2PNumAttempts(GetPersistedValue(kPrefsP2PNumAttempts)); | 
 | } | 
 |  | 
 | Time PayloadState::GetP2PFirstAttemptTimestamp() { | 
 |   return p2p_first_attempt_timestamp_; | 
 | } | 
 |  | 
 | void PayloadState::SetP2PFirstAttemptTimestamp(const Time& time) { | 
 |   p2p_first_attempt_timestamp_ = time; | 
 |   LOG(INFO) << "p2p First Attempt Timestamp = " | 
 |             << utils::ToString(p2p_first_attempt_timestamp_); | 
 |   CHECK(prefs_); | 
 |   int64_t stored_value = time.ToInternalValue(); | 
 |   prefs_->SetInt64(kPrefsP2PFirstAttemptTimestamp, stored_value); | 
 | } | 
 |  | 
 | void PayloadState::LoadP2PFirstAttemptTimestamp() { | 
 |   int64_t stored_value = GetPersistedValue(kPrefsP2PFirstAttemptTimestamp); | 
 |   Time stored_time = Time::FromInternalValue(stored_value); | 
 |   SetP2PFirstAttemptTimestamp(stored_time); | 
 | } | 
 |  | 
 | void PayloadState::P2PNewAttempt() { | 
 |   CHECK(prefs_); | 
 |   // Set timestamp, if it hasn't been set already | 
 |   if (p2p_first_attempt_timestamp_.is_null()) { | 
 |     SetP2PFirstAttemptTimestamp(system_state_->clock()->GetWallclockTime()); | 
 |   } | 
 |   // Increase number of attempts | 
 |   SetP2PNumAttempts(GetP2PNumAttempts() + 1); | 
 | } | 
 |  | 
 | bool PayloadState::P2PAttemptAllowed() { | 
 |   if (p2p_num_attempts_ > kMaxP2PAttempts) { | 
 |     LOG(INFO) << "Number of p2p attempts is " << p2p_num_attempts_ | 
 |               << " which is greater than " | 
 |               << kMaxP2PAttempts | 
 |               << " - disallowing p2p."; | 
 |     return false; | 
 |   } | 
 |  | 
 |   if (!p2p_first_attempt_timestamp_.is_null()) { | 
 |     Time now = system_state_->clock()->GetWallclockTime(); | 
 |     TimeDelta time_spent_attempting_p2p = now - p2p_first_attempt_timestamp_; | 
 |     if (time_spent_attempting_p2p.InSeconds() < 0) { | 
 |       LOG(ERROR) << "Time spent attempting p2p is negative" | 
 |                  << " - disallowing p2p."; | 
 |       return false; | 
 |     } | 
 |     if (time_spent_attempting_p2p.InSeconds() > kMaxP2PAttemptTimeSeconds) { | 
 |       LOG(INFO) << "Time spent attempting p2p is " | 
 |                 << utils::FormatTimeDelta(time_spent_attempting_p2p) | 
 |                 << " which is greater than " | 
 |                 << utils::FormatTimeDelta(TimeDelta::FromSeconds( | 
 |                        kMaxP2PAttemptTimeSeconds)) | 
 |                 << " - disallowing p2p."; | 
 |       return false; | 
 |     } | 
 |   } | 
 |  | 
 |   return true; | 
 | } | 
 |  | 
 | }  // namespace chromeos_update_engine |