| // |
| // Copyright (C) 2012 The Android Open Source Project |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| |
| #include "update_engine/real_system_state.h" |
| |
| #include <string> |
| |
| #include <base/bind.h> |
| #include <base/files/file_util.h> |
| #include <base/location.h> |
| #include <base/time/time.h> |
| #include <brillo/make_unique_ptr.h> |
| #include <brillo/message_loops/message_loop.h> |
| |
| #include "update_engine/common/boot_control.h" |
| #include "update_engine/common/boot_control_stub.h" |
| #include "update_engine/common/constants.h" |
| #include "update_engine/common/hardware.h" |
| #include "update_engine/common/utils.h" |
| #include "update_engine/update_manager/state_factory.h" |
| #include "update_engine/weave_service_factory.h" |
| |
| using brillo::MessageLoop; |
| |
| namespace chromeos_update_engine { |
| |
| RealSystemState::RealSystemState(const scoped_refptr<dbus::Bus>& bus) |
| : debugd_proxy_(bus), |
| power_manager_proxy_(bus), |
| session_manager_proxy_(bus), |
| shill_proxy_(bus), |
| libcros_proxy_(bus) { |
| } |
| |
| RealSystemState::~RealSystemState() { |
| // Prevent any DBus communication from UpdateAttempter when shutting down the |
| // daemon. |
| if (update_attempter_) |
| update_attempter_->ClearObservers(); |
| } |
| |
| bool RealSystemState::Initialize() { |
| metrics_lib_.Init(); |
| |
| boot_control_ = boot_control::CreateBootControl(); |
| if (!boot_control_) { |
| LOG(WARNING) << "Unable to create BootControl instance, using stub " |
| << "instead. All update attempts will fail."; |
| boot_control_ = brillo::make_unique_ptr(new BootControlStub()); |
| } |
| |
| hardware_ = hardware::CreateHardware(); |
| if (!hardware_) { |
| LOG(ERROR) << "Error intializing the HardwareInterface."; |
| return false; |
| } |
| |
| LOG_IF(INFO, !hardware_->IsNormalBootMode()) << "Booted in dev mode."; |
| LOG_IF(INFO, !hardware_->IsOfficialBuild()) << "Booted non-official build."; |
| |
| if (!shill_proxy_.Init()) { |
| LOG(ERROR) << "Failed to initialize shill proxy."; |
| return false; |
| } |
| |
| // Initialize standard and powerwash-safe prefs. |
| base::FilePath non_volatile_path; |
| // TODO(deymo): Fall back to in-memory prefs if there's no physical directory |
| // available. |
| if (!hardware_->GetNonVolatileDirectory(&non_volatile_path)) { |
| LOG(ERROR) << "Failed to get a non-volatile directory."; |
| return false; |
| } |
| Prefs* prefs; |
| prefs_.reset(prefs = new Prefs()); |
| if (!prefs->Init(non_volatile_path.Append(kPrefsSubDirectory))) { |
| LOG(ERROR) << "Failed to initialize preferences."; |
| return false; |
| } |
| |
| base::FilePath powerwash_safe_path; |
| if (!hardware_->GetPowerwashSafeDirectory(&powerwash_safe_path)) { |
| // TODO(deymo): Fall-back to in-memory prefs if there's no powerwash-safe |
| // directory, or disable powerwash feature. |
| powerwash_safe_path = non_volatile_path.Append("powerwash-safe"); |
| LOG(WARNING) << "No powerwash-safe directory, using non-volatile one."; |
| } |
| powerwash_safe_prefs_.reset(prefs = new Prefs()); |
| if (!prefs->Init( |
| powerwash_safe_path.Append(kPowerwashSafePrefsSubDirectory))) { |
| LOG(ERROR) << "Failed to initialize powerwash preferences."; |
| return false; |
| } |
| |
| // Check the system rebooted marker file. |
| std::string boot_id; |
| if (utils::GetBootId(&boot_id)) { |
| std::string prev_boot_id; |
| system_rebooted_ = (!prefs_->GetString(kPrefsBootId, &prev_boot_id) || |
| prev_boot_id != boot_id); |
| prefs_->SetString(kPrefsBootId, boot_id); |
| } else { |
| LOG(WARNING) << "Couldn't detect the bootid, assuming system was rebooted."; |
| system_rebooted_ = true; |
| } |
| |
| // Initialize the OmahaRequestParams with the default settings. These settings |
| // will be re-initialized before every request using the actual request |
| // options. This initialization here pre-loads current channel and version, so |
| // the DBus service can access it. |
| if (!request_params_.Init("", "", false)) { |
| LOG(WARNING) << "Ignoring OmahaRequestParams initialization error. Some " |
| "features might not work properly."; |
| } |
| |
| certificate_checker_.reset( |
| new CertificateChecker(prefs_.get(), &openssl_wrapper_)); |
| certificate_checker_->Init(); |
| |
| // Initialize the UpdateAttempter before the UpdateManager. |
| update_attempter_.reset( |
| new UpdateAttempter(this, certificate_checker_.get(), &libcros_proxy_, |
| &debugd_proxy_)); |
| update_attempter_->Init(); |
| |
| weave_service_ = ConstructWeaveService(update_attempter_.get()); |
| if (weave_service_) |
| update_attempter_->AddObserver(weave_service_.get()); |
| |
| // Initialize the Update Manager using the default state factory. |
| chromeos_update_manager::State* um_state = |
| chromeos_update_manager::DefaultStateFactory( |
| &policy_provider_, &shill_proxy_, &session_manager_proxy_, this); |
| if (!um_state) { |
| LOG(ERROR) << "Failed to initialize the Update Manager."; |
| return false; |
| } |
| update_manager_.reset( |
| new chromeos_update_manager::UpdateManager( |
| &clock_, base::TimeDelta::FromSeconds(5), |
| base::TimeDelta::FromHours(12), um_state)); |
| |
| // The P2P Manager depends on the Update Manager for its initialization. |
| p2p_manager_.reset(P2PManager::Construct( |
| nullptr, &clock_, update_manager_.get(), "cros_au", |
| kMaxP2PFilesToKeep, base::TimeDelta::FromDays(kMaxP2PFileAgeDays))); |
| |
| if (!payload_state_.Initialize(this)) { |
| LOG(ERROR) << "Failed to initialize the payload state object."; |
| return false; |
| } |
| |
| // All is well. Initialization successful. |
| return true; |
| } |
| |
| bool RealSystemState::StartUpdater() { |
| // Initiate update checks. |
| update_attempter_->ScheduleUpdates(); |
| |
| // Update boot flags after 45 seconds. |
| MessageLoop::current()->PostDelayedTask( |
| FROM_HERE, |
| base::Bind(&UpdateAttempter::UpdateBootFlags, |
| base::Unretained(update_attempter_.get())), |
| base::TimeDelta::FromSeconds(45)); |
| |
| // Broadcast the update engine status on startup to ensure consistent system |
| // state on crashes. |
| MessageLoop::current()->PostTask(FROM_HERE, base::Bind( |
| &UpdateAttempter::BroadcastStatus, |
| base::Unretained(update_attempter_.get()))); |
| |
| // Run the UpdateEngineStarted() method on |update_attempter|. |
| MessageLoop::current()->PostTask(FROM_HERE, base::Bind( |
| &UpdateAttempter::UpdateEngineStarted, |
| base::Unretained(update_attempter_.get()))); |
| return true; |
| } |
| |
| void RealSystemState::AddObserver(ServiceObserverInterface* observer) { |
| CHECK(update_attempter_.get()); |
| update_attempter_->AddObserver(observer); |
| } |
| |
| void RealSystemState::RemoveObserver(ServiceObserverInterface* observer) { |
| CHECK(update_attempter_.get()); |
| update_attempter_->RemoveObserver(observer); |
| } |
| |
| } // namespace chromeos_update_engine |