| #!/usr/bin/env python3 |
| # |
| # Copyright (C) 2016 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); you may not |
| # use this file except in compliance with the License. You may obtain a copy of |
| # the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| # License for the specific language governing permissions and limitations under |
| # the License. |
| """ |
| Basic LE Stress tests. |
| """ |
| |
| import concurrent |
| import pprint |
| import time |
| |
| from queue import Empty |
| from acts.test_decorators import test_tracker_info |
| from acts.test_utils.bt.BluetoothBaseTest import BluetoothBaseTest |
| from acts.test_utils.bt.bt_test_utils import BtTestUtilsError |
| from acts.test_utils.bt.bt_test_utils import clear_bonded_devices |
| from acts.test_utils.bt.bt_test_utils import generate_ble_advertise_objects |
| from acts.test_utils.bt.bt_test_utils import generate_ble_scan_objects |
| from acts.test_utils.bt.bt_test_utils import get_advanced_droid_list |
| from acts.test_utils.bt.bt_test_utils import get_mac_address_of_generic_advertisement |
| from acts.test_utils.bt.bt_test_utils import reset_bluetooth |
| from acts.test_utils.bt.bt_constants import scan_result |
| |
| |
| class BleStressTest(BluetoothBaseTest): |
| default_timeout = 10 |
| PAIRING_TIMEOUT = 20 |
| droid_list = [] |
| |
| def setup_class(self): |
| super().setup_class() |
| self.droid_list = get_advanced_droid_list(self.android_devices) |
| self.scn_ad = self.android_devices[0] |
| self.adv_ad = self.android_devices[1] |
| |
| def teardown_test(self): |
| super().teardown_test() |
| self.log_stats() |
| |
| def bleadvertise_verify_onsuccess_handler(self, event): |
| test_result = True |
| self.log.debug("Verifying onSuccess event") |
| self.log.debug(pprint.pformat(event)) |
| return test_result |
| |
| def _verify_successful_bond(self, target_address): |
| end_time = time.time() + self.PAIRING_TIMEOUT |
| self.log.info("Verifying devices are bonded") |
| while time.time() < end_time: |
| bonded_devices = self.scn_ad.droid.bluetoothGetBondedDevices() |
| if target_address in {d['address'] for d in bonded_devices}: |
| self.log.info("Successfully bonded to device") |
| return True |
| return False |
| |
| @BluetoothBaseTest.bt_test_wrap |
| @test_tracker_info(uuid='22f98085-6ed8-4ad8-b62d-b8d1eae20b89') |
| def test_loop_scanning_1000(self): |
| """Stress start/stop scan instances. |
| |
| This test will start and stop scan instances as fast as possible. This |
| will guarantee that the scan instances are properly being cleaned up |
| when the scan is stopped. |
| |
| Steps: |
| 1. Start a scan instance. |
| 2. Stop the scan instance. |
| 3. Repeat steps 1-2 1000 times. |
| |
| Expected Result: |
| Neither starting or stopping scan instances causes any failures. |
| |
| Returns: |
| Pass if True |
| Fail if False |
| |
| TAGS: LE, Scanning, Stress |
| Priority: 1 |
| """ |
| test_result = True |
| for _ in range(1000): |
| filter_list, scan_settings, scan_callback = generate_ble_scan_objects( |
| self.scn_ad.droid) |
| self.scn_ad.droid.bleStartBleScan(filter_list, scan_settings, |
| scan_callback) |
| self.scn_ad.droid.bleStopBleScan(scan_callback) |
| return test_result |
| |
| @BluetoothBaseTest.bt_test_wrap |
| @test_tracker_info(uuid='6caa84c2-50ac-46f2-a5e5-f942fd2cd6f6') |
| def test_loop_scanning_100_verify_no_hci_timeout(self): |
| """Stress start/stop scan instances variant. |
| |
| This test will start and stop scan instances with a one second timeout |
| in between each iteration. This testcase was added because the specific |
| timing combination caused hci timeouts. |
| |
| Steps: |
| 1. Start a scan instance. |
| 2. Stop the scan instance. |
| 3. Sleep for 1 second. |
| 4. Repeat steps 1-3 100 times. |
| |
| Expected Result: |
| Neither starting or stopping scan instances causes any failures. |
| |
| Returns: |
| Pass if True |
| Fail if False |
| |
| TAGS: LE, Scanning, Stress |
| Priority: 1 |
| """ |
| for _ in range(self.droid_list[1]['max_advertisements']): |
| adv_callback, adv_data, adv_settings = generate_ble_advertise_objects( |
| self.adv_ad.droid) |
| self.adv_ad.droid.bleStartBleAdvertising(adv_callback, adv_data, |
| adv_settings) |
| for _ in range(100): |
| filter_list, scan_settings, scan_callback = generate_ble_scan_objects( |
| self.scn_ad.droid) |
| self.scn_ad.droid.bleStartBleScan(filter_list, scan_settings, |
| scan_callback) |
| self.log.info( |
| self.scn_ad.ed.pop_event(scan_result.format(scan_callback))) |
| self.scn_ad.droid.bleStopBleScan(scan_callback) |
| time.sleep(1) |
| return True |
| |
| @BluetoothBaseTest.bt_test_wrap |
| @test_tracker_info(uuid='5e9e4c8d-b72e-4767-81e5-f907c1834430') |
| def test_loop_advertising_100(self): |
| """Stress start/stop advertising instances. |
| |
| This test will start and stop advertising instances as fast as possible. |
| |
| Steps: |
| 1. Start a advertising instance. |
| 2. Find that an onSuccess callback is triggered. |
| 3. Stop the advertising instance. |
| 4. Repeat steps 1-3 100 times. |
| |
| Expected Result: |
| Neither starting or stopping advertising instances causes any failures. |
| |
| Returns: |
| Pass if True |
| Fail if False |
| |
| TAGS: LE, Advertising, Stress |
| Priority: 1 |
| """ |
| test_result = True |
| for _ in range(100): |
| advertise_callback, advertise_data, advertise_settings = generate_ble_advertise_objects( |
| self.adv_ad.droid) |
| self.adv_ad.droid.bleStartBleAdvertising( |
| advertise_callback, advertise_data, advertise_settings) |
| expected_advertise_event_name = "".join( |
| ["BleAdvertise", |
| str(advertise_callback), "onSuccess"]) |
| worker = self.adv_ad.ed.handle_event( |
| self.bleadvertise_verify_onsuccess_handler, |
| expected_advertise_event_name, ([]), self.default_timeout) |
| try: |
| self.log.debug(worker.result(self.default_timeout)) |
| except Empty as error: |
| self.log.debug(" ".join( |
| ["Test failed with Empty error:", |
| str(error)])) |
| test_result = False |
| except concurrent.futures._base.TimeoutError as error: |
| self.log.debug(" ".join([ |
| "Test failed, filtering callback onSuccess never occurred:", |
| str(error) |
| ])) |
| test_result = False |
| self.adv_ad.droid.bleStopBleAdvertising(advertise_callback) |
| return test_result |
| |
| @BluetoothBaseTest.bt_test_wrap |
| @test_tracker_info(uuid='11a2f51b-7178-4c32-bb5c-7eddd100a50f') |
| def test_restart_advertise_callback_after_bt_toggle(self): |
| """Test to reuse an advertise callback. |
| |
| This will verify if advertising objects can be reused after a bluetooth |
| toggle. |
| |
| Steps: |
| 1. Start a advertising instance. |
| 2. Find that an onSuccess callback is triggered. |
| 3. Stop the advertising instance. |
| 4. Toggle bluetooth off and on. |
| 5. Start an advertising instance on the same objects used in step 1. |
| 6. Find that an onSuccess callback is triggered. |
| |
| Expected Result: |
| Advertisement should start successfully. |
| |
| Returns: |
| Pass if True |
| Fail if False |
| |
| TAGS: LE, Advertising, Stress |
| Priority: 1 |
| """ |
| test_result = True |
| advertise_callback, advertise_data, advertise_settings = generate_ble_advertise_objects( |
| self.adv_ad.droid) |
| self.adv_ad.droid.bleStartBleAdvertising( |
| advertise_callback, advertise_data, advertise_settings) |
| expected_advertise_event_name = "".join( |
| ["BleAdvertise", |
| str(advertise_callback), "onSuccess"]) |
| worker = self.adv_ad.ed.handle_event( |
| self.bleadvertise_verify_onsuccess_handler, |
| expected_advertise_event_name, ([]), self.default_timeout) |
| try: |
| self.log.debug(worker.result(self.default_timeout)) |
| except Empty as error: |
| self.log.debug(" ".join( |
| ["Test failed with Empty error:", |
| str(error)])) |
| test_result = False |
| except concurrent.futures._base.TimeoutError as error: |
| self.log.debug(" ".join([ |
| "Test failed, filtering callback onSuccess never occurred:", |
| str(error) |
| ])) |
| test_result = reset_bluetooth([self.scn_ad]) |
| if not test_result: |
| return test_result |
| time.sleep(5) |
| self.adv_ad.droid.bleStartBleAdvertising( |
| advertise_callback, advertise_data, advertise_settings) |
| worker = self.adv_ad.ed.handle_event( |
| self.bleadvertise_verify_onsuccess_handler, |
| expected_advertise_event_name, ([]), self.default_timeout) |
| try: |
| self.log.debug(worker.result(self.default_timeout)) |
| except Empty as error: |
| self.log.debug(" ".join( |
| ["Test failed with Empty error:", |
| str(error)])) |
| test_result = False |
| except concurrent.futures._base.TimeoutError as error: |
| self.log.debug(" ".join([ |
| "Test failed, filtering callback onSuccess never occurred:", |
| str(error) |
| ])) |
| return test_result |
| |
| @BluetoothBaseTest.bt_test_wrap |
| @test_tracker_info(uuid='88f3c068-41be-41df-920c-c0ecaae1a619') |
| def test_restart_scan_callback_after_bt_toggle(self): |
| """Test to reuse an scan callback. |
| |
| This will verify if scan objects can be reused after a bluetooth |
| toggle. |
| |
| Steps: |
| 1. Start a scanning instance. |
| 3. Stop the scanning instance. |
| 4. Toggle bluetooth off and on. |
| 5. Start an scanning instance on the same objects used in step 1. |
| |
| Expected Result: |
| Scanner should start successfully. |
| |
| Returns: |
| Pass if True |
| Fail if False |
| |
| TAGS: LE, Scanning, Stress |
| Priority: 1 |
| """ |
| test_result = True |
| filter_list, scan_settings, scan_callback = generate_ble_scan_objects( |
| self.scn_ad.droid) |
| self.scn_ad.droid.bleStartBleScan(filter_list, scan_settings, |
| scan_callback) |
| reset_bluetooth([self.scn_ad]) |
| self.scn_ad.droid.bleStartBleScan(filter_list, scan_settings, |
| scan_callback) |
| |
| return test_result |
| |
| @BluetoothBaseTest.bt_test_wrap |
| @test_tracker_info(uuid='ce8adfc0-384f-4751-9438-13a76cada8da') |
| def test_le_pairing(self): |
| """Test LE pairing transport stress |
| |
| This will test LE pairing between two android devices. |
| |
| Steps: |
| 1. Start an LE advertisement on secondary device. |
| 2. Find address from primary device. |
| 3. Discover and bond to LE address. |
| 4. Stop LE advertisement on secondary device. |
| 5. Repeat steps 1-4 100 times |
| |
| Expected Result: |
| LE pairing should pass 100 times. |
| |
| Returns: |
| Pass if True |
| Fail if False |
| |
| TAGS: LE, Scanning, Stress, Pairing |
| Priority: 1 |
| """ |
| iterations = 100 |
| for i in range(iterations): |
| try: |
| target_address, adv_callback, scan_callback = get_mac_address_of_generic_advertisement( |
| self.scn_ad, self.adv_ad) |
| except BtTestUtilsError as err: |
| self.log.error(err) |
| return False |
| self.log.info("Begin interation {}/{}".format(i + 1, iterations)) |
| self.scn_ad.droid.bluetoothStartPairingHelper() |
| self.adv_ad.droid.bluetoothStartPairingHelper() |
| start_time = self.start_timer() |
| self.scn_ad.droid.bluetoothDiscoverAndBond(target_address) |
| if not self._verify_successful_bond(target_address): |
| self.log.error("Failed to bond devices.") |
| return False |
| self.log.info("Total time (ms): {}".format(self.end_timer())) |
| if not self._verify_successful_bond(self.adv_ad.droid.bluetoothGetLocalAddress()): |
| self.log.error("Failed to bond BREDR devices.") |
| return False |
| if not self.scn_ad.droid.bluetoothUnbond(target_address): |
| self.log.error("Failed to unbond device from scanner.") |
| return False |
| time.sleep(2) |
| if not self.adv_ad.droid.bluetoothUnbond(self.scn_ad.droid.bluetoothGetLocalAddress()): |
| self.log.error("Failed to unbond device from advertiser.") |
| return False |
| self.adv_ad.droid.bleStopBleAdvertising(adv_callback) |
| self.scn_ad.droid.bleStopBleScan(scan_callback) |
| # Magic sleep to let unbonding finish |
| time.sleep(2) |
| return True |