| # |
| # Copyright 2018 - The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import logging |
| import os |
| import random |
| import socket |
| import threading |
| import time |
| |
| from acts import asserts |
| from acts import base_test |
| from acts import test_runner |
| from acts.controllers import adb |
| from acts.test_decorators import test_tracker_info |
| from acts.test_utils.tel.tel_data_utils import wait_for_cell_data_connection |
| from acts.test_utils.tel.tel_test_utils import verify_http_connection |
| from acts.test_utils.tel.tel_test_utils import _check_file_existance |
| from acts.test_utils.tel.tel_test_utils import _generate_file_directory_and_file_name |
| from acts.test_utils.wifi import wifi_test_utils as wutils |
| from acts.test_utils.net.connectivity_const import MULTIPATH_PREFERENCE_NONE as NONE |
| from acts.test_utils.net.connectivity_const import MULTIPATH_PREFERENCE_HANDOVER as HANDOVER |
| from acts.test_utils.net.connectivity_const import MULTIPATH_PREFERENCE_RELIABILITY as RELIABILITY |
| from acts.test_utils.net.connectivity_const import MULTIPATH_PREFERENCE_PERFORMANCE as PERFORMANCE |
| |
| DOWNLOAD_PATH = "/sdcard/Download/" |
| RELIABLE = RELIABILITY | HANDOVER |
| |
| class DataCostTest(base_test.BaseTestClass): |
| """ Tests for Wifi Tethering """ |
| |
| def setup_class(self): |
| """ Setup devices for tethering and unpack params """ |
| |
| req_params = ("wifi_network", "download_file") |
| self.unpack_userparams(req_params) |
| |
| for ad in self.android_devices: |
| wutils.reset_wifi(ad) |
| ad.droid.telephonyToggleDataConnection(True) |
| wait_for_cell_data_connection(self.log, ad, True) |
| asserts.assert_true( |
| verify_http_connection(self.log, ad), |
| "HTTP verification failed on cell data connection") |
| |
| def teardown_class(self): |
| for ad in self.android_devices: |
| wutils.reset_wifi(ad) |
| ad.droid.telephonyToggleDataConnection(True) |
| |
| """ Helper functions """ |
| |
| def _get_total_data_usage_for_device(self, ad, conn_type, sub_id): |
| """ Get total data usage in MB for device |
| |
| Args: |
| ad: Android device object |
| conn_type: MOBILE/WIFI data usage |
| sub_id: subscription id |
| |
| Returns: |
| Data usage in MB |
| """ |
| # end time should be in milli seconds and at least 2 hours more than the |
| # actual end time. NetStats:bucket is of size 2 hours and to ensure to |
| # get the most recent data usage, end_time should be +2hours |
| end_time = int(time.time() * 1000) + 2 * 1000 * 60 * 60 |
| data_usage = ad.droid.connectivityQuerySummaryForDevice( |
| conn_type, sub_id, 0, end_time) |
| data_usage /= 1000.0 * 1000.0 # convert data_usage to MB |
| self.log.info("Total data usage is: %s" % data_usage) |
| return data_usage |
| |
| def _check_if_multipath_preference_valid(self, val, exp): |
| """ Check if multipath value is same as expected |
| |
| Args: |
| val: multipath preference for the network |
| exp: expected multipath preference value |
| """ |
| if exp == NONE: |
| asserts.assert_true(val == exp, "Multipath value should be 0") |
| else: |
| asserts.assert_true(val >= exp, |
| "Multipath value should be at least %s" % exp) |
| |
| def _verify_multipath_preferences(self, |
| ad, |
| wifi_pref, |
| cell_pref, |
| wifi_network, |
| cell_network): |
| """ Verify mutlipath preferences for wifi and cell networks |
| |
| Args: |
| ad: Android device object |
| wifi_pref: Expected multipath value for wifi network |
| cell_pref: Expected multipath value for cell network |
| wifi_network: Wifi network id on the device |
| cell_network: Cell network id on the device |
| """ |
| wifi_multipath = \ |
| ad.droid.connectivityGetMultipathPreferenceForNetwork(wifi_network) |
| cell_multipath = \ |
| ad.droid.connectivityGetMultipathPreferenceForNetwork(cell_network) |
| self.log.info("WiFi multipath preference: %s" % wifi_multipath) |
| self.log.info("Cell multipath preference: %s" % cell_multipath) |
| self.log.info("Checking multipath preference for wifi") |
| self._check_if_multipath_preference_valid(wifi_multipath, wifi_pref) |
| self.log.info("Checking multipath preference for cell") |
| self._check_if_multipath_preference_valid(cell_multipath, cell_pref) |
| |
| """ Test Cases """ |
| |
| @test_tracker_info(uuid="e86c8108-3e84-4668-bae4-e5d2c8c27910") |
| def test_multipath_preference_low_data_limit(self): |
| """ Verify multipath preference when mobile data limit is low |
| |
| Steps: |
| 1. DUT has WiFi and LTE data |
| 2. Set mobile data usage limit to low value |
| 3. Verify that multipath preference is 0 for cell network |
| """ |
| # set vars |
| ad = self.android_devices[0] |
| sub_id = str(ad.droid.telephonyGetSubscriberId()) |
| cell_network = ad.droid.connectivityGetActiveNetwork() |
| self.log.info("cell network %s" % cell_network) |
| wutils.wifi_connect(ad, self.wifi_network) |
| wifi_network = ad.droid.connectivityGetActiveNetwork() |
| self.log.info("wifi network %s" % wifi_network) |
| |
| # verify mulipath preference values |
| self._verify_multipath_preferences( |
| ad, RELIABLE, RELIABLE, wifi_network, cell_network) |
| |
| # set low data limit on mobile data |
| total_pre = self._get_total_data_usage_for_device(ad, 0, sub_id) |
| self.log.info("Setting data usage limit to %sMB" % (total_pre + 5)) |
| ad.droid.connectivitySetDataUsageLimit( |
| sub_id, int((total_pre + 5) * 1000.0 * 1000.0)) |
| self.log.info("Setting data warning limit to %sMB" % (total_pre + 5)) |
| ad.droid.connectivitySetDataWarningLimit( |
| sub_id, int((total_pre + 5) * 1000.0 * 1000.0)) |
| |
| # reset data limit |
| ad.droid.connectivityFactoryResetNetworkPolicies(sub_id) |
| ad.droid.connectivitySetDataWarningLimit(sub_id, -1) |
| |
| # verify multipath preference values |
| self._verify_multipath_preferences( |
| ad, RELIABLE, NONE, wifi_network, cell_network) |
| |
| @test_tracker_info(uuid="a2781411-d880-476a-9f40-2c67e0f97db9") |
| def test_multipath_preference_data_download(self): |
| """ Verify multipath preference when large file is downloaded |
| |
| Steps: |
| 1. DUT has WiFi and LTE data |
| 2. WiFi is active network |
| 3. Download large file over cell network |
| 4. Verify multipath preference on cell network is 0 |
| """ |
| # set vars |
| ad = self.android_devices[1] |
| cell_network = ad.droid.connectivityGetActiveNetwork() |
| self.log.info("cell network %s" % cell_network) |
| wutils.wifi_connect(ad, self.wifi_network) |
| wifi_network = ad.droid.connectivityGetActiveNetwork() |
| self.log.info("wifi network %s" % wifi_network) |
| |
| # verify multipath preference for wifi and cell networks |
| self._verify_multipath_preferences( |
| ad, RELIABLE, RELIABLE, wifi_network, cell_network) |
| |
| # download file with cell network |
| ad.droid.connectivityNetworkOpenConnection(cell_network, |
| self.download_file) |
| file_folder, file_name = _generate_file_directory_and_file_name( |
| self.download_file, DOWNLOAD_PATH) |
| file_path = os.path.join(file_folder, file_name) |
| self.log.info("File path: %s" % file_path) |
| if _check_file_existance(ad, file_path): |
| self.log.info("File exists. Removing file %s" % file_name) |
| ad.adb.shell("rm -rf %s%s" % (DOWNLOAD_PATH, file_name)) |
| |
| # verify multipath preference values |
| self._verify_multipath_preferences( |
| ad, RELIABLE, NONE, wifi_network, cell_network) |
| |
| # TODO gmoturu@: Need to add tests that use the mobility rig and test when |
| # the WiFi signal is poor and data signal is good. |