jschung | 25850f0 | 2020-06-17 14:38:11 +0900 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2020 Google LLC |
| 3 | * |
| 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | * you may not use this file except in compliance with the License. |
| 6 | * You may obtain a copy of the License at |
| 7 | * |
| 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | * |
| 10 | * Unless required by applicable law or agreed to in writing, software |
| 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | * See the License for the specific language governing permissions and |
| 14 | * limitations under the License. |
| 15 | */ |
| 16 | |
| 17 | syntax = "proto3"; |
| 18 | |
| 19 | package stress_test; |
| 20 | |
| 21 | option optimize_for = CODE_SIZE; |
| 22 | |
| 23 | message LoggingEventConfig { |
| 24 | // The process name that this event can be found on, or LOGCAT to come from |
| 25 | // 'adb logcat'. |
| 26 | string source = 1; |
| 27 | // The name of the event to trigger. |
| 28 | string name = 2; |
| 29 | // A list of regexes that can be used to detect the specified event. |
| 30 | repeated string regex = 3; |
| 31 | } |
| 32 | |
| 33 | message TimeStampConfig { |
| 34 | enum TimeStampType { |
| 35 | UNKNOWN = 0; |
| 36 | DATE = 1; |
| 37 | MONOTONIC = 2; |
| 38 | } |
| 39 | // If the type is DATE, then we assume it can be parsed by a python datetime. |
| 40 | // MONOTONIC sources are from the device's boot time. |
| 41 | TimeStampType type = 3; |
| 42 | // The regex to extract the string containing the timestamp. |
| 43 | string regex = 4; |
| 44 | // The format string to pass to the python datetime constructor for the |
| 45 | // matched regex. |
| 46 | string date_format = 5; |
| 47 | // The multiplier used on the parsed monotonic time to convert it to seconds. |
| 48 | double monotonic_to_seconds_multiplier = 6; |
| 49 | } |
| 50 | |
| 51 | message FileConfig { |
| 52 | // The file that should be cat-ed on device to get information. Will be used |
| 53 | // by LoggingEventConfigs. |
| 54 | string source = 1; |
| 55 | // The filepath to save the output of this file on the local machine. If |
| 56 | // blank, will be discarded. |
| 57 | string destination = 2; |
| 58 | // The information needed to extract timestamps from the config. |
| 59 | TimeStampConfig time_stamp = 3; |
| 60 | // True if the file spits out a bit of the buffer that it did previously when |
| 61 | // reopened (like the logcat does). |
| 62 | bool repeats_output_on_open = 4; |
| 63 | } |
| 64 | |
| 65 | message ProcessConfig { |
| 66 | // The command to run to produce logging output. |
| 67 | string command = 1; |
| 68 | // The name of the process to be used in LoggingEventConfigs. |
| 69 | string name = 2; |
| 70 | // The filepath to save the output of this process on the local machine. If |
| 71 | // blank, will be discarded. |
| 72 | string destination = 3; |
| 73 | // The information needed to extract timestamps from the config. |
| 74 | TimeStampConfig time_stamp = 4; |
| 75 | // Restart the process if it crashes randomly. |
| 76 | bool restart = 5; |
| 77 | // True if the file spits out a bit of the buffer that it did previously when |
| 78 | // reopened (like the logcat does). |
| 79 | bool repeats_output_on_open = 6; |
| 80 | } |
| 81 | |
| 82 | message DeviceConfig { |
| 83 | // Commands to run once at the beginning of the test for the device. |
| 84 | repeated string setup_command = 1; |
| 85 | // Files that should have their contents monitored for events. |
| 86 | repeated FileConfig file_to_watch = 2; |
| 87 | // Files that should be moved to the local machine after every iteration of |
| 88 | // the stress test. |
| 89 | repeated FileConfig file_to_move = 3; |
| 90 | // All events that can be triggered by this device. |
| 91 | repeated LoggingEventConfig event = 5; |
| 92 | // Any processes that should be monitored for events. |
| 93 | repeated ProcessConfig daemon_process = 6; |
| 94 | // Include any other device definitions before processing the contents of this |
| 95 | // one. Note that if duplicate entries exist for the repeated elements (based |
| 96 | // on the name), only the "latest" in the include chain will be used. |
| 97 | repeated string include = 7; |
| 98 | // A list of tags that should be squelched from the logcat - useful for super |
| 99 | // spammy irrelevant logcat tags. |
| 100 | repeated string tag_to_suppress = 8; |
| 101 | // Either a TestEventConfig without a condition (but a name) that allows extra |
| 102 | // actions to take place when a specific test event occurs, or a standard test |
| 103 | // event that will be invoked regardless of which test is running. |
| 104 | repeated TestEventConfig test_event = 9; |
| 105 | } |
| 106 | |
| 107 | message TestStep { |
| 108 | // Path to raw audio file to play during this test step. |
| 109 | string audio_file = 1; |
| 110 | // Sample rate of audio file. |
| 111 | int32 audio_file_sample_rate = 2; |
| 112 | // Number of channels in audio file. |
| 113 | int32 audio_file_num_channels = 3; |
| 114 | // The sox format of the audio file. |
| 115 | string audio_file_format = 4; |
| 116 | // Command to run on this test step. |
| 117 | string command = 5; |
| 118 | // How many seconds to wait before executing the command/playing the sound in |
| 119 | // this step. |
| 120 | float delay_before = 6; |
| 121 | // How many seconds to wait after executing the command/playing the sound in |
| 122 | // this step. |
| 123 | float delay_after = 7; |
| 124 | } |
| 125 | |
| 126 | message ExpectedResult { |
| 127 | int32 aohd_hotword_detected = 1; |
| 128 | int32 assistant_started = 2; |
| 129 | int32 dsp_false_accept = 3; |
| 130 | int32 logcat_iteration = 4; |
| 131 | int32 software_hotword = 5; |
| 132 | int32 speaker_id_rejected = 6; |
| 133 | int32 vis_software_hotword = 7; |
| 134 | } |
| 135 | |
| 136 | message TestEventConfig { |
| 137 | // The name of the event. (Used for readability/allowing devices to add custom |
| 138 | // actions when an event of a specific name occurs). |
| 139 | string name = 1; |
| 140 | // An eval condition that should only be true when the actions in this event |
| 141 | // should be executed. |
| 142 | string condition = 2; |
| 143 | // List of actions to take when the condition is satisfied. BUGREPORT, NOTIFY, |
| 144 | // REMOVE_DEVICE and ABORT are all special values that take a bugreport, send |
| 145 | // an email, remove the device from the test or stops stress testing |
| 146 | // respectively. |
| 147 | repeated string action = 3; |
| 148 | } |
| 149 | |
| 150 | message StressTestConfig { |
| 151 | // Description of what the test does. |
| 152 | string description = 1; |
| 153 | // List of steps to take in sequence repeatedly to do the stress test. |
| 154 | repeated TestStep step = 2; |
| 155 | // Events that trigger special actions on the device when the condition is |
| 156 | // satisfied. |
| 157 | repeated TestEventConfig event = 3; |
| 158 | // Commands that should be run at the beginning of the test to setup the |
| 159 | // device. |
| 160 | repeated string setup_command = 4; |
| 161 | // Definition of Expected test result |
| 162 | repeated ExpectedResult expected_result = 5; |
| 163 | } |
| 164 | |
| 165 | message EventLogDetails { |
| 166 | int32 iteration = 1; |
| 167 | string name = 2; |
| 168 | } |
| 169 | |
| 170 | message EventLog { |
| 171 | repeated EventLogDetails event = 1; |
| 172 | } |
| 173 | |
| 174 | message DeviceIdentifier { |
| 175 | string device_type = 1; |
| 176 | string serial_number = 2; |
| 177 | } |
| 178 | |
| 179 | message StressTestInfo { |
| 180 | // Metadata info describing the devices involved in the stress test, and a bit |
| 181 | // about what test was actually run. |
| 182 | string test_name = 1; |
| 183 | string test_description = 2; |
| 184 | string uuid = 3; |
| 185 | repeated DeviceIdentifier device = 4; |
| 186 | } |