| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| package com.android.tradefed.invoker; |
| |
| import com.android.ddmlib.Log.LogLevel; |
| import com.android.tradefed.build.BuildRetrievalError; |
| import com.android.tradefed.build.IBuildInfo; |
| import com.android.tradefed.command.CommandRunner.ExitCode; |
| import com.android.tradefed.config.GlobalConfiguration; |
| import com.android.tradefed.config.IConfiguration; |
| import com.android.tradefed.device.DeviceNotAvailableException; |
| import com.android.tradefed.device.DeviceUnresponsiveException; |
| import com.android.tradefed.device.ITestDevice; |
| import com.android.tradefed.device.ITestDevice.RecoveryMode; |
| import com.android.tradefed.device.StubDevice; |
| import com.android.tradefed.device.TestDeviceState; |
| import com.android.tradefed.device.cloud.ManagedRemoteDevice; |
| import com.android.tradefed.guice.InvocationScope; |
| import com.android.tradefed.invoker.sandbox.ParentSandboxInvocationExecution; |
| import com.android.tradefed.invoker.sandbox.SandboxedInvocationExecution; |
| import com.android.tradefed.invoker.shard.ShardBuildCloner; |
| import com.android.tradefed.log.BaseLeveledLogOutput; |
| import com.android.tradefed.log.ILeveledLogOutput; |
| import com.android.tradefed.log.ILogRegistry; |
| import com.android.tradefed.log.LogRegistry; |
| import com.android.tradefed.log.LogUtil.CLog; |
| import com.android.tradefed.postprocessor.IPostProcessor; |
| import com.android.tradefed.result.ITestInvocationListener; |
| import com.android.tradefed.result.InputStreamSource; |
| import com.android.tradefed.result.LogDataType; |
| import com.android.tradefed.result.LogSaverResultForwarder; |
| import com.android.tradefed.result.ResultAndLogForwarder; |
| import com.android.tradefed.result.ResultForwarder; |
| import com.android.tradefed.targetprep.BuildError; |
| import com.android.tradefed.targetprep.DeviceFailedToBootError; |
| import com.android.tradefed.targetprep.TargetSetupError; |
| import com.android.tradefed.testtype.IRemoteTest; |
| import com.android.tradefed.testtype.IResumableTest; |
| import com.android.tradefed.testtype.IRetriableTest; |
| import com.android.tradefed.util.IRunUtil; |
| import com.android.tradefed.util.RunInterruptedException; |
| import com.android.tradefed.util.RunUtil; |
| import com.android.tradefed.util.TimeUtil; |
| |
| import com.google.common.annotations.VisibleForTesting; |
| |
| import java.io.IOException; |
| import java.util.ArrayList; |
| import java.util.Arrays; |
| import java.util.List; |
| import java.util.Map.Entry; |
| |
| /** |
| * Default implementation of {@link ITestInvocation}. |
| * <p/> |
| * Loads major objects based on {@link IConfiguration} |
| * - retrieves build |
| * - prepares target |
| * - runs tests |
| * - reports results |
| */ |
| public class TestInvocation implements ITestInvocation { |
| |
| /** Key of the command line args attributes */ |
| public static final String COMMAND_ARGS_KEY = "command_line_args"; |
| |
| /** |
| * Format of the key in {@link IBuildInfo} to log the battery level for each step of the |
| * invocation. (Setup, test, tear down). |
| */ |
| private static final String BATTERY_ATTRIBUTE_FORMAT_KEY = "%s-battery-%s"; |
| |
| static final String TRADEFED_LOG_NAME = "host_log"; |
| /** Suffix used on host_log for the part before sharding occurs. */ |
| static final String BEFORE_SHARDING_SUFFIX = "_before_sharding"; |
| static final String DEVICE_LOG_NAME_PREFIX = "device_logcat_"; |
| static final String EMULATOR_LOG_NAME_PREFIX = "emulator_log_"; |
| static final String BUILD_ERROR_BUGREPORT_NAME = "build_error_bugreport"; |
| static final String DEVICE_UNRESPONSIVE_BUGREPORT_NAME = "device_unresponsive_bugreport"; |
| static final String INVOCATION_ENDED_BUGREPORT_NAME = "invocation_ended_bugreport"; |
| static final String TARGET_SETUP_ERROR_BUGREPORT_NAME = "target_setup_error_bugreport"; |
| static final String BATT_TAG = "[battery level]"; |
| |
| public enum Stage { |
| ERROR("error"), |
| SETUP("setup"), |
| TEST("test"), |
| TEARDOWN("teardown"); |
| |
| private final String mName; |
| |
| Stage(String name) { |
| mName = name; |
| } |
| |
| public String getName() { |
| return mName; |
| } |
| } |
| |
| /** The different mode an invocation can run into. */ |
| public enum RunMode { |
| REGULAR, |
| PARENT_SANDBOX, |
| SANDBOX, |
| REMOTE_INVOCATION, |
| } |
| |
| private String mStatus = "(not invoked)"; |
| private boolean mStopRequested = false; |
| |
| /** |
| * A {@link ResultForwarder} for forwarding resumed invocations. |
| * <p/> |
| * It filters the invocationStarted event for the resumed invocation, and sums the invocation |
| * elapsed time |
| */ |
| private static class ResumeResultForwarder extends ResultForwarder { |
| |
| long mCurrentElapsedTime; |
| |
| /** |
| * @param listeners |
| */ |
| public ResumeResultForwarder(List<ITestInvocationListener> listeners, |
| long currentElapsedTime) { |
| super(listeners); |
| mCurrentElapsedTime = currentElapsedTime; |
| } |
| |
| @Override |
| public void invocationStarted(IInvocationContext context) { |
| // ignore |
| } |
| |
| @Override |
| public void invocationEnded(long newElapsedTime) { |
| super.invocationEnded(mCurrentElapsedTime + newElapsedTime); |
| } |
| } |
| |
| /** |
| * Display a log message informing the user of a invocation being started. |
| * |
| * @param context the {@link IInvocationContext} |
| * @param config the {@link IConfiguration} |
| */ |
| private void logStartInvocation(IInvocationContext context, IConfiguration config) { |
| String shardSuffix = ""; |
| if (config.getCommandOptions().getShardIndex() != null) { |
| shardSuffix = |
| String.format( |
| " (shard %d of %d)", |
| config.getCommandOptions().getShardIndex() + 1, |
| config.getCommandOptions().getShardCount()); |
| } |
| StringBuilder buildInfos = new StringBuilder(); |
| StringBuilder msg = new StringBuilder("Starting invocation for '"); |
| msg.append(context.getTestTag()); |
| msg.append("' with "); |
| for (Entry<ITestDevice, IBuildInfo> entry : context.getDeviceBuildMap().entrySet()) { |
| msg.append("'[ "); |
| msg.append(entry.getValue().toString()); |
| buildInfos.append(entry.getValue().toString()); |
| msg.append(" on device '"); |
| msg.append(entry.getKey().getSerialNumber()); |
| msg.append("'] "); |
| } |
| msg.append(shardSuffix); |
| CLog.logAndDisplay(LogLevel.INFO, msg.toString()); |
| mStatus = String.format("running %s on build(s) '%s'", context.getTestTag(), |
| buildInfos.toString()) + shardSuffix; |
| } |
| |
| /** |
| * Performs the invocation |
| * |
| * @param config the {@link IConfiguration} |
| * @param context the {@link IInvocationContext} to use. |
| */ |
| private void performInvocation( |
| IConfiguration config, |
| IInvocationContext context, |
| IInvocationExecution invocationPath, |
| IRescheduler rescheduler, |
| ITestInvocationListener listener, |
| boolean devicePreSetupDone) |
| throws Throwable { |
| |
| boolean resumed = false; |
| String bugreportName = null; |
| long startTime = System.currentTimeMillis(); |
| long elapsedTime = -1; |
| Throwable exception = null; |
| Throwable tearDownException = null; |
| ITestDevice badDevice = null; |
| |
| // Ensure that no unexpected attributes are added afterward |
| ((InvocationContext) context).lockAttributes(); |
| try { |
| logDeviceBatteryLevel(context, "initial"); |
| // Run the preInvocationSetup on devices. |
| if (!devicePreSetupDone) { |
| if (!config.getCommandOptions().shouldUseSandboxing()) { |
| invocationPath.runDevicePreInvocationSetup(context, config, listener); |
| } |
| } |
| // Then run the regular setup and run |
| prepareAndRun(config, context, invocationPath, listener); |
| } catch (BuildError e) { |
| exception = e; |
| CLog.w("Build failed on device '%s'. Reason: %s", e.getDeviceDescriptor(), |
| e.toString()); |
| bugreportName = BUILD_ERROR_BUGREPORT_NAME; |
| badDevice = context.getDeviceBySerial(e.getDeviceDescriptor().getSerial()); |
| if (e instanceof DeviceFailedToBootError) { |
| if (badDevice == null) { |
| context.setRecoveryModeForAllDevices(RecoveryMode.NONE); |
| } else { |
| badDevice.setRecoveryMode(RecoveryMode.NONE); |
| } |
| } |
| reportFailure(e, listener, config, context, rescheduler, invocationPath); |
| } catch (TargetSetupError e) { |
| exception = e; |
| CLog.e("Caught exception while running invocation"); |
| CLog.e(e); |
| bugreportName = TARGET_SETUP_ERROR_BUGREPORT_NAME; |
| badDevice = context.getDeviceBySerial(e.getDeviceDescriptor().getSerial()); |
| reportFailure(e, listener, config, context, rescheduler, invocationPath); |
| } catch (DeviceNotAvailableException e) { |
| exception = e; |
| // log a warning here so its captured before reportLogs is called |
| CLog.w("Invocation did not complete due to device %s becoming not available. " + |
| "Reason: %s", e.getSerial(), e.getMessage()); |
| badDevice = context.getDeviceBySerial(e.getSerial()); |
| if ((e instanceof DeviceUnresponsiveException) && badDevice != null |
| && TestDeviceState.ONLINE.equals(badDevice.getDeviceState())) { |
| // under certain cases it might still be possible to grab a bugreport |
| bugreportName = DEVICE_UNRESPONSIVE_BUGREPORT_NAME; |
| } |
| resumed = resume(config, context, rescheduler, System.currentTimeMillis() - startTime); |
| if (!resumed) { |
| reportFailure(e, listener, config, context, rescheduler, invocationPath); |
| } else { |
| CLog.i("Rescheduled failed invocation for resume"); |
| } |
| // Upon reaching here after an exception, it is safe to assume that recovery |
| // has already been attempted so we disable it to avoid re-entry during clean up. |
| if (badDevice != null) { |
| badDevice.setRecoveryMode(RecoveryMode.NONE); |
| } |
| throw e; |
| } catch (RunInterruptedException e) { |
| CLog.w("Invocation interrupted"); |
| reportFailure(e, listener, config, context, rescheduler, invocationPath); |
| } catch (AssertionError e) { |
| exception = e; |
| CLog.e("Caught AssertionError while running invocation: %s", e.toString()); |
| CLog.e(e); |
| reportFailure(e, listener, config, context, rescheduler, invocationPath); |
| } catch (Throwable t) { |
| exception = t; |
| // log a warning here so its captured before reportLogs is called |
| CLog.e("Unexpected exception when running invocation: %s", t.toString()); |
| CLog.e(t); |
| reportFailure(t, listener, config, context, rescheduler, invocationPath); |
| throw t; |
| } finally { |
| for (ITestDevice device : context.getDevices()) { |
| invocationPath.reportLogs(device, listener, Stage.TEST); |
| } |
| getRunUtil().allowInterrupt(false); |
| if (config.getCommandOptions().takeBugreportOnInvocationEnded() || |
| config.getCommandOptions().takeBugreportzOnInvocationEnded()) { |
| if (bugreportName != null) { |
| CLog.i("Bugreport to be taken for failure instead of invocation ended."); |
| } else { |
| bugreportName = INVOCATION_ENDED_BUGREPORT_NAME; |
| } |
| } |
| if (bugreportName != null) { |
| if (badDevice == null) { |
| for (ITestDevice device : context.getDevices()) { |
| takeBugreport(device, listener, bugreportName); |
| } |
| } else { |
| // If we have identified a faulty device only take the bugreport on it. |
| takeBugreport(badDevice, listener, bugreportName); |
| } |
| } |
| mStatus = "tearing down"; |
| try { |
| invocationPath.doTeardown(context, config, listener, exception); |
| } catch (Throwable e) { |
| tearDownException = e; |
| CLog.e("Exception when tearing down invocation: %s", tearDownException.toString()); |
| CLog.e(tearDownException); |
| if (exception == null) { |
| // only report when the exception is new during tear down |
| reportFailure( |
| tearDownException, |
| listener, |
| config, |
| context, |
| rescheduler, |
| invocationPath); |
| } |
| } |
| mStatus = "done running tests"; |
| try { |
| // Clean up host. |
| invocationPath.doCleanUp(context, config, exception); |
| for (ITestDevice device : context.getDevices()) { |
| invocationPath.reportLogs(device, listener, Stage.TEARDOWN); |
| } |
| if (mStopRequested) { |
| CLog.e( |
| "=====================================================================" |
| + "===="); |
| CLog.e( |
| "Invocation was interrupted due to TradeFed stop, results will be " |
| + "affected."); |
| CLog.e( |
| "=====================================================================" |
| + "===="); |
| } |
| reportHostLog(listener, config); |
| elapsedTime = System.currentTimeMillis() - startTime; |
| if (!resumed) { |
| listener.invocationEnded(elapsedTime); |
| } |
| } finally { |
| invocationPath.cleanUpBuilds(context, config); |
| } |
| } |
| if (tearDownException != null) { |
| // this means a DNAE or RTE has happened during teardown, need to throw |
| // if there was a preceding RTE or DNAE stored in 'exception', it would have already |
| // been thrown before exiting the previous try...catch...finally block |
| throw tearDownException; |
| } |
| } |
| |
| /** Do setup and run the tests */ |
| private void prepareAndRun( |
| IConfiguration config, |
| IInvocationContext context, |
| IInvocationExecution invocationPath, |
| ITestInvocationListener listener) |
| throws Throwable { |
| getRunUtil().allowInterrupt(true); |
| logDeviceBatteryLevel(context, "initial -> setup"); |
| invocationPath.doSetup(context, config, listener); |
| logDeviceBatteryLevel(context, "setup -> test"); |
| invocationPath.runTests(context, config, listener); |
| logDeviceBatteryLevel(context, "after test"); |
| } |
| |
| /** |
| * Starts the invocation. |
| * <p/> |
| * Starts logging, and informs listeners that invocation has been started. |
| * |
| * @param config |
| * @param context |
| */ |
| private void startInvocation(IConfiguration config, IInvocationContext context, |
| ITestInvocationListener listener) { |
| logStartInvocation(context, config); |
| listener.invocationStarted(context); |
| } |
| |
| /** |
| * Attempt to reschedule the failed invocation to resume where it left off. |
| * <p/> |
| * @see IResumableTest |
| * |
| * @param config |
| * @return <code>true</code> if invocation was resumed successfully |
| */ |
| private boolean resume(IConfiguration config, IInvocationContext context, |
| IRescheduler rescheduler, long elapsedTime) { |
| for (IRemoteTest test : config.getTests()) { |
| if (test instanceof IResumableTest) { |
| IResumableTest resumeTest = (IResumableTest)test; |
| if (resumeTest.isResumable()) { |
| // resume this config if any test is resumable |
| IConfiguration resumeConfig = config.clone(); |
| // reuse the same build for the resumed invocation |
| ShardBuildCloner.cloneBuildInfos(resumeConfig, resumeConfig, context); |
| |
| // create a result forwarder, to prevent sending two invocationStarted events |
| resumeConfig.setTestInvocationListener(new ResumeResultForwarder( |
| config.getTestInvocationListeners(), elapsedTime)); |
| resumeConfig.setLogOutput(config.getLogOutput().clone()); |
| resumeConfig.setCommandOptions(config.getCommandOptions().clone()); |
| boolean canReschedule = rescheduler.scheduleConfig(resumeConfig); |
| if (!canReschedule) { |
| CLog.i("Cannot reschedule resumed config for build. Cleaning up build."); |
| for (String deviceName : context.getDeviceConfigNames()) { |
| resumeConfig.getDeviceConfigByName(deviceName).getBuildProvider() |
| .cleanUp(context.getBuildInfo(deviceName)); |
| } |
| } |
| // FIXME: is it a bug to return from here, when we may not have completed the |
| // FIXME: config.getTests iteration? |
| return canReschedule; |
| } |
| } |
| } |
| return false; |
| } |
| |
| private void reportFailure( |
| Throwable exception, |
| ITestInvocationListener listener, |
| IConfiguration config, |
| IInvocationContext context, |
| IRescheduler rescheduler, |
| IInvocationExecution invocationPath) { |
| // Always report the failure |
| listener.invocationFailed(exception); |
| // Reset the build (if necessary) and decide if we should reschedule the configuration. |
| boolean shouldReschedule = |
| invocationPath.resetBuildAndReschedule(exception, listener, config, context); |
| if (shouldReschedule) { |
| rescheduleTest(config, rescheduler); |
| } |
| } |
| |
| private void rescheduleTest(IConfiguration config, IRescheduler rescheduler) { |
| for (IRemoteTest test : config.getTests()) { |
| if (!config.getCommandOptions().isLoopMode() && test instanceof IRetriableTest && |
| ((IRetriableTest) test).isRetriable()) { |
| rescheduler.rescheduleCommand(); |
| return; |
| } |
| } |
| } |
| |
| private void reportHostLog(ITestInvocationListener listener, IConfiguration config) { |
| reportHostLog(listener, config, TRADEFED_LOG_NAME); |
| } |
| |
| private void reportHostLog( |
| ITestInvocationListener listener, IConfiguration config, String name) { |
| ILeveledLogOutput logger = config.getLogOutput(); |
| try (InputStreamSource globalLogSource = logger.getLog()) { |
| if (config.getCommandOptions().getHostLogSuffix() != null) { |
| name += config.getCommandOptions().getHostLogSuffix(); |
| } |
| listener.testLog(name, LogDataType.TEXT, globalLogSource); |
| } |
| // once tradefed log is reported, all further log calls for this invocation can get lost |
| // unregister logger so future log calls get directed to the tradefed global log |
| getLogRegistry().unregisterLogger(); |
| logger.closeLog(); |
| } |
| |
| private void takeBugreport( |
| ITestDevice device, ITestInvocationListener listener, String bugreportName) { |
| if (device == null) { |
| return; |
| } |
| if (device.getIDevice() instanceof StubDevice) { |
| return; |
| } |
| // logBugreport will report a regular bugreport if bugreportz is not supported. |
| boolean res = |
| device.logBugreport( |
| String.format("%s_%s", bugreportName, device.getSerialNumber()), listener); |
| if (!res) { |
| CLog.w("Error when collecting bugreport for device '%s'", device.getSerialNumber()); |
| } |
| } |
| |
| /** |
| * Gets the {@link ILogRegistry} to use. |
| * <p/> |
| * Exposed for unit testing. |
| */ |
| ILogRegistry getLogRegistry() { |
| return LogRegistry.getLogRegistry(); |
| } |
| |
| /** |
| * Utility method to fetch the default {@link IRunUtil} singleton |
| * <p /> |
| * Exposed for unit testing. |
| */ |
| IRunUtil getRunUtil() { |
| return RunUtil.getDefault(); |
| } |
| |
| @Override |
| public String toString() { |
| return mStatus; |
| } |
| |
| /** |
| * Log the battery level of each device in the invocation. |
| * |
| * @param context the {@link IInvocationContext} of the invocation. |
| * @param event a {@link String} describing the context of the logging (initial, setup, etc.). |
| */ |
| @VisibleForTesting |
| void logDeviceBatteryLevel(IInvocationContext context, String event) { |
| for (ITestDevice testDevice : context.getDevices()) { |
| if (testDevice == null) { |
| continue; |
| } |
| if (testDevice.getIDevice() instanceof StubDevice) { |
| continue; |
| } |
| Integer batteryLevel = testDevice.getBattery(); |
| if (batteryLevel == null) { |
| CLog.v("Failed to get battery level for %s", testDevice.getSerialNumber()); |
| continue; |
| } |
| CLog.v("%s - %s - %d%%", BATT_TAG, event, batteryLevel); |
| context.getBuildInfo(testDevice) |
| .addBuildAttribute( |
| String.format( |
| BATTERY_ATTRIBUTE_FORMAT_KEY, |
| testDevice.getSerialNumber(), |
| event), |
| batteryLevel.toString()); |
| } |
| } |
| |
| /** |
| * Invoke {@link IInvocationExecution#fetchBuild(IInvocationContext, IConfiguration, |
| * IRescheduler, ITestInvocationListener)} and handles the output as well as failures. |
| * |
| * @param context the {@link IInvocationContext} of the invocation. |
| * @param config the {@link IConfiguration} of this test run. |
| * @param rescheduler the {@link IRescheduler}, for rescheduling portions of the invocation for |
| * execution on another resource(s) |
| * @param listener the {@link ITestInvocation} to report build download failures. |
| * @param invocationPath the {@link IInvocationExecution} driving the invocation. |
| * @return True if we successfully downloaded the build, false otherwise. |
| * @throws DeviceNotAvailableException |
| */ |
| private boolean invokeFetchBuild( |
| IInvocationContext context, |
| IConfiguration config, |
| IRescheduler rescheduler, |
| ITestInvocationListener listener, |
| IInvocationExecution invocationPath) |
| throws DeviceNotAvailableException { |
| Exception buildException = null; |
| boolean res = false; |
| try { |
| res = invocationPath.fetchBuild(context, config, rescheduler, listener); |
| if (res) { |
| // Successful fetch of build. |
| return true; |
| } |
| // In case of build not found issues. |
| mStatus = "(no build to test)"; |
| rescheduleTest(config, rescheduler); |
| // Set the exit code to error |
| buildException = new BuildRetrievalError("No build found to test."); |
| setExitCode(ExitCode.NO_BUILD, buildException); |
| } catch (BuildRetrievalError e) { |
| buildException = e; |
| } |
| // Report an empty invocation, so this error is sent to listeners |
| startInvocation(config, context, listener); |
| // Don't want to use #reportFailure, since that will call buildNotTested |
| listener.invocationFailed(buildException); |
| for (ITestDevice device : context.getDevices()) { |
| invocationPath.reportLogs(device, listener, Stage.ERROR); |
| } |
| reportHostLog(listener, config); |
| listener.invocationEnded(0L); |
| return false; |
| } |
| |
| /** {@inheritDoc} */ |
| @Override |
| public void invoke( |
| IInvocationContext context, |
| IConfiguration config, |
| IRescheduler rescheduler, |
| ITestInvocationListener... extraListeners) |
| throws DeviceNotAvailableException, Throwable { |
| List<ITestInvocationListener> allListeners = |
| new ArrayList<>(config.getTestInvocationListeners().size() + extraListeners.length); |
| allListeners.addAll(config.getTestInvocationListeners()); |
| allListeners.addAll(Arrays.asList(extraListeners)); |
| ITestInvocationListener listener = null; |
| if (!config.getPostProcessors().isEmpty()) { |
| ITestInvocationListener forwarder = new ResultAndLogForwarder(allListeners); |
| // Post-processors are the first layer around the final reporters. |
| for (IPostProcessor postProcessor : config.getPostProcessors()) { |
| if (postProcessor.isDisabled()) { |
| CLog.d("%s has been disabled. skipping.", postProcessor); |
| } else { |
| forwarder = postProcessor.init(forwarder); |
| } |
| } |
| listener = new LogSaverResultForwarder(config.getLogSaver(), Arrays.asList(forwarder)); |
| } else { |
| listener = new LogSaverResultForwarder(config.getLogSaver(), allListeners); |
| } |
| |
| RunMode mode = RunMode.REGULAR; |
| if (config.getConfigurationDescription().shouldUseSandbox()) { |
| mode = RunMode.SANDBOX; |
| } |
| if (config.getCommandOptions().shouldUseSandboxing()) { |
| mode = RunMode.PARENT_SANDBOX; |
| } |
| if (context.getDevices().get(0) instanceof ManagedRemoteDevice) { |
| mode = RunMode.REMOTE_INVOCATION; |
| } |
| IInvocationExecution invocationPath = createInvocationExec(mode); |
| |
| // Create the Guice scope |
| InvocationScope scope = getInvocationScope(); |
| scope.enter(); |
| // Seed our TF objects to the Guice scope |
| scope.seed(IRescheduler.class, rescheduler); |
| scope.seedConfiguration(config); |
| try { |
| mStatus = "fetching build"; |
| ILeveledLogOutput leveledLogOutput = config.getLogOutput(); |
| leveledLogOutput.init(); |
| if (leveledLogOutput instanceof BaseLeveledLogOutput) { |
| ((BaseLeveledLogOutput) leveledLogOutput).initFilters(config); |
| } |
| getLogRegistry().registerLogger(config.getLogOutput()); |
| for (String deviceName : context.getDeviceConfigNames()) { |
| context.getDevice(deviceName).clearLastConnectedWifiNetwork(); |
| context.getDevice(deviceName) |
| .setOptions(config.getDeviceConfigByName(deviceName).getDeviceOptions()); |
| if (config.getDeviceConfigByName(deviceName) |
| .getDeviceOptions() |
| .isLogcatCaptureEnabled()) { |
| if (!(context.getDevice(deviceName).getIDevice() instanceof StubDevice)) { |
| context.getDevice(deviceName).startLogcat(); |
| } |
| } |
| } |
| |
| String cmdLineArgs = config.getCommandLine(); |
| if (cmdLineArgs != null) { |
| CLog.i("Invocation was started with cmd: %s", cmdLineArgs); |
| } |
| |
| long start = System.currentTimeMillis(); |
| boolean providerSuccess = |
| invokeFetchBuild(context, config, rescheduler, listener, invocationPath); |
| long fetchBuildDuration = System.currentTimeMillis() - start; |
| context.addInvocationTimingMetric(IInvocationContext.TimingEvent.FETCH_BUILD, |
| fetchBuildDuration); |
| CLog.d("Fetch build duration: %s", TimeUtil.formatElapsedTime(fetchBuildDuration)); |
| if (!providerSuccess) { |
| return; |
| } |
| |
| boolean deviceInit = false; |
| // If the top level invocation has --use-sandbox do not shard there. It will shard in |
| // the child invocation. |
| if (RunMode.REGULAR.equals(mode) || RunMode.SANDBOX.equals(mode)) { |
| mStatus = "sharding"; |
| |
| // TODO: Handle local sharding and special devices |
| Integer shardCount = config.getCommandOptions().getShardCount(); |
| Integer shardIndex = config.getCommandOptions().getShardIndex(); |
| // Special Handling in case of sharding within the same invocation (in-place): Some |
| // devices (Remote devices for example) require extra preparation step to be |
| // available, but sharding requires the device to be available in some cases. So |
| // we call the device setup early to meet all the requirements. |
| if (shardCount != null && shardIndex != null) { |
| deviceInit = true; |
| startInvocation(config, context, listener); |
| try { |
| invocationPath.runDevicePreInvocationSetup(context, config, listener); |
| } catch (DeviceNotAvailableException | TargetSetupError e) { |
| CLog.e(e); |
| setExitCode(ExitCode.THROWABLE_EXCEPTION, e); |
| try { |
| invocationPath.runDevicePostInvocationTearDown(context, config); |
| } finally { |
| listener.invocationFailed(e); |
| // Reports the logs |
| for (ITestDevice device : context.getDevices()) { |
| invocationPath.reportLogs(device, listener, Stage.ERROR); |
| } |
| reportHostLog(listener, config); |
| listener.invocationEnded(0L); |
| } |
| return; |
| } |
| } |
| |
| boolean sharding = invocationPath.shardConfig(config, context, rescheduler); |
| if (sharding) { |
| CLog.i( |
| "Invocation for %s has been sharded, rescheduling", |
| context.getSerials()); |
| // Log the chunk of parent host_log before sharding |
| reportHostLog(listener, config, TRADEFED_LOG_NAME + BEFORE_SHARDING_SUFFIX); |
| config.getLogSaver().invocationEnded(0L); |
| return; |
| } |
| } |
| // Once we have all the information we can start the invocation. |
| if (!deviceInit) { |
| startInvocation(config, context, listener); |
| } |
| if (config.getTests() == null || config.getTests().isEmpty()) { |
| CLog.e("No tests to run"); |
| if (deviceInit) { |
| // If we did an early setup, do the tear down. |
| invocationPath.runDevicePostInvocationTearDown(context, config); |
| } |
| listener.invocationEnded(0L); |
| return; |
| } |
| |
| performInvocation(config, context, invocationPath, rescheduler, listener, deviceInit); |
| setExitCode(ExitCode.NO_ERROR, null); |
| } catch (IOException e) { |
| CLog.e(e); |
| } finally { |
| scope.exit(); |
| // Ensure build infos are always cleaned up at the end of invocation. |
| invocationPath.cleanUpBuilds(context, config); |
| |
| // ensure we always deregister the logger |
| for (String deviceName : context.getDeviceConfigNames()) { |
| if (!(context.getDevice(deviceName).getIDevice() instanceof StubDevice)) { |
| context.getDevice(deviceName).stopLogcat(); |
| } |
| } |
| // save remaining logs contents to global log |
| getLogRegistry().dumpToGlobalLog(config.getLogOutput()); |
| // Ensure log is unregistered and closed |
| getLogRegistry().unregisterLogger(); |
| config.getLogOutput().closeLog(); |
| config.cleanDynamicOptionFiles(); |
| } |
| } |
| |
| /** Returns the current {@link InvocationScope}. */ |
| @VisibleForTesting |
| InvocationScope getInvocationScope() { |
| return InvocationScope.getDefault(); |
| } |
| |
| /** |
| * Helper to set the exit code. Exposed for testing. |
| */ |
| protected void setExitCode(ExitCode code, Throwable stack) { |
| GlobalConfiguration.getInstance().getCommandScheduler() |
| .setLastInvocationExitCode(code, stack); |
| } |
| |
| public static String getDeviceLogName(Stage stage) { |
| return DEVICE_LOG_NAME_PREFIX + stage.getName(); |
| } |
| |
| public static String getEmulatorLogName(Stage stage) { |
| return EMULATOR_LOG_NAME_PREFIX + stage.getName(); |
| } |
| |
| @Override |
| public void notifyInvocationStopped() { |
| mStopRequested = true; |
| } |
| |
| /** |
| * Create the invocation path that should be followed. |
| * |
| * @param mode The mode we are currently running as. |
| * @return The {@link IInvocationExecution} describing the invocation. |
| */ |
| public IInvocationExecution createInvocationExec(RunMode mode) { |
| switch (mode) { |
| case PARENT_SANDBOX: |
| return new ParentSandboxInvocationExecution(); |
| case SANDBOX: |
| return new SandboxedInvocationExecution(); |
| case REMOTE_INVOCATION: |
| return new RemoteInvocationExecution(); |
| default: |
| return new InvocationExecution(); |
| } |
| } |
| |
| /** Prints a delimiter for a given Stage of the invocation. */ |
| public static void printStageDelimiter(Stage phase, boolean end) { |
| String startEnd = end ? "ENDING" : "STARTING"; |
| String message = String.format("===== %s PHASE %s =====", phase, startEnd); |
| String limit = ""; |
| for (int i = 0; i < message.length(); i++) { |
| limit += "="; |
| } |
| String finalFormat = String.format("\n%s\n%s\n%s", limit, message, limit); |
| CLog.d(finalFormat); |
| } |
| } |