| <!-- Copyright (c) 2018-2021, The Linux Foundation. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are |
| met: |
| * Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above |
| copyright notice, this list of conditions and the following |
| disclaimer in the documentation and/or other materials provided |
| with the distribution. |
| * Neither the name of The Linux Foundation nor the names of its |
| contributors may be used to endorse or promote products derived |
| from this software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| --> |
| <!-- Changes from Qualcomm Innovation Center are provided under the following license: |
| |
| Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted (subject to the limitations in the |
| disclaimer below) provided that the following conditions are met: |
| |
| * Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| * Redistributions in binary form must reproduce the above |
| copyright notice, this list of conditions and the following |
| disclaimer in the documentation and/or other materials provided |
| with the distribution. |
| |
| * Neither the name of Qualcomm Innovation Center, Inc. nor the names of its |
| contributors may be used to endorse or promote products derived |
| from this software without specific prior written permission. |
| |
| NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE |
| GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT |
| HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED |
| WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER |
| IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| --> |
| <compatibility-matrix version="1.0" type="framework"> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.scve.panorama</name> |
| <version>1.0</version> |
| <interface> |
| <name>IPanoramaTracking</name> |
| <instance>panoTracking</instance> |
| </interface> |
| <interface> |
| <name>IPanoramaStitching</name> |
| <instance>panoStitching</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.scve.objecttracker</name> |
| <version>1.0</version> |
| <interface> |
| <name>IObjectTracker</name> |
| <instance>objectTracker</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.perf</name> |
| <version>2.0-3</version> |
| <interface> |
| <name>IPerf</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.display.color</name> |
| <version>1.0-8</version> |
| <interface> |
| <name>IDisplayColor</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.display.postproc</name> |
| <version>1.0</version> |
| <interface> |
| <name>IDisplayPostproc</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.display.demura</name> |
| <version>1.0</version> |
| <version>2.0</version> |
| <interface> |
| <name>IDemuraFileFinder</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.qseecom</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQSEECom</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.qteeconnector</name> |
| <version>1.0</version> |
| <interface> |
| <name>IAppConnector</name> |
| <instance>default</instance> |
| </interface> |
| <interface> |
| <name>IGPAppConnector</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.debugutils</name> |
| <version>1.0</version> |
| <interface> |
| <name>IDebugUtils</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.factory</name> |
| <version>1.0-1</version> |
| <interface> |
| <name>IFactory</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>com.qualcomm.qti.dpm.api</name> |
| <version>1.0</version> |
| <interface> |
| <name>IdpmQmi</name> |
| <instance>dpmQmiService</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>android.hardware.nfc</name> |
| <version>1.0</version> |
| <interface> |
| <name>INfc</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>android.hardware.radio</name> |
| <version>1.0-4</version> |
| <interface> |
| <name>IRadio</name> |
| <instance>slot1</instance> |
| <instance>slot2</instance> |
| </interface> |
| <interface> |
| <name>ISap</name> |
| <instance>slot1</instance> |
| <instance>slot2</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.seccam</name> |
| <version>1.0</version> |
| <interface> |
| <name>ISecCam</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.bluetooth_audio</name> |
| <version>2.0-1</version> |
| <interface> |
| <name>IBluetoothAudioProvidersFactory</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>com.qualcomm.qti.imscmservice</name> |
| <version>2.0-2</version> |
| <interface> |
| <name>IImsCmService</name> |
| <instance>qti.ims.connectionmanagerservice</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>com.qualcomm.qti.uceservice</name> |
| <version>2.0-1</version> |
| <version>2.2</version> |
| <version>2.3</version> |
| <interface> |
| <name>IUceService</name> |
| <instance>com.qualcomm.qti.uceservice</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>com.qualcomm.qti.wifidisplayhal</name> |
| <version>1.0</version> |
| <interface> |
| <name>IHDCPSession</name> |
| <instance>wifidisplayhdcphal</instance> |
| </interface> |
| <interface> |
| <name>IDSManager</name> |
| <instance>wifidisplaydshal</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.wifidisplaysession</name> |
| <version>1.0</version> |
| <interface> |
| <name>IWifiDisplaySession</name> |
| <instance>wifidisplaysession</instance> |
| </interface> |
| <interface> |
| <name>IWifiDisplaySessionVideoTrack</name> |
| <instance>wifidisplaysessionvideotrack</instance> |
| </interface> |
| <interface> |
| <name>IWifiDisplaySessionAudioTrack</name> |
| <instance>wifidisplaysessionaudiotrack</instance> |
| </interface> |
| <interface> |
| <name>IWifiDisplaySessionImageTrack</name> |
| <instance>wifidisplaysessionimagetrack</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>com.quicinc.cne.server</name> |
| <version>2.0-2</version> |
| <interface> |
| <name>IServer</name> |
| <instance>cnd</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>com.quicinc.cne.api</name> |
| <version>1.0-1</version> |
| <interface> |
| <name>IApiService</name> |
| <instance>cnd</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.nxp.hardware.nfc</name> |
| <version>1.0-1</version> |
| <version>2.0</version> |
| <interface> |
| <name>INqNfc</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.nxp.nxpnfclegacy</name> |
| <version>1.0</version> |
| <interface> |
| <name>INxpNfcLegacy</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.esepowermanager</name> |
| <version>1.0-1</version> |
| <interface> |
| <name>IEsePowerManager</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.alarm</name> |
| <version>1.0</version> |
| <interface> |
| <name>IAlarm</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.data.latency</name> |
| <impl level="generic"></impl> |
| <version>1.0</version> |
| <interface> |
| <name>ILinkLatency</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.data.connection</name> |
| <version>1.0-1</version> |
| <interface> |
| <name>IDataConnection</name> |
| <instance>slot1</instance> |
| <instance>slot2</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.data.connectionfactory</name> |
| <version>1</version> |
| <interface> |
| <name>IFactory</name> |
| <instance>slot0</instance> |
| <instance>slot1</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.cacert</name> |
| <version>1.0</version> |
| <interface> |
| <name>IService</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.fm</name> |
| <version>1.0</version> |
| <interface> |
| <name>IFmHci</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.btconfigstore</name> |
| <version>1.0</version> |
| <version>2.0</version> |
| <interface> |
| <name>IBTConfigStore</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>com.dsi.ant</name> |
| <version>1.0</version> |
| <interface> |
| <name>IAnt</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.iop</name> |
| <version>2.0</version> |
| <interface> |
| <name>IIop</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.qdutils_disp</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQdutilsDisp</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.radio.am</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQcRilAudio</name> |
| <instance>slot1</instance> |
| <instance>slot2</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.radio.am</name> |
| <interface> |
| <name>IQcRilAudio</name> |
| <instance>slot1</instance> |
| <instance>slot2</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.radio.ims</name> |
| <version>1.0-8</version> |
| <interface> |
| <name>IImsRadio</name> |
| <instance>imsradio0</instance> |
| <instance>imsradio1</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.radio.ims</name> |
| <version>1-7</version> |
| <interface> |
| <name>IImsRadio</name> |
| <instance>imsradio0</instance> |
| <instance>imsradio1</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.radio.internal.deviceinfo</name> |
| <version>1.0</version> |
| <interface> |
| <name>IDeviceInfo</name> |
| <instance>deviceinfo</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.radio.lpa</name> |
| <version>1.0-2</version> |
| <interface> |
| <name>IUimLpa</name> |
| <instance>UimLpa0</instance> |
| <instance>UimLpa1</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.radio.qcrilhook</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQtiOemHook</name> |
| <instance>oemhook0</instance> |
| <instance>oemhook1</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.radio.qtiradio</name> |
| <version>1.0</version> |
| <version>2.0-6</version> |
| <interface> |
| <name>IQtiRadio</name> |
| <instance>slot1</instance> |
| <instance>slot2</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.radio.qtiradio</name> |
| <version>1-5</version> |
| <interface> |
| <name>IQtiRadioStable</name> |
| <instance>slot1</instance> |
| <instance>slot2</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.radio.uim_remote_client</name> |
| <version>1.0</version> |
| <interface> |
| <name>IUimRemoteServiceClient</name> |
| <instance>uimRemoteClient0</instance> |
| <instance>uimRemoteClient1</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.radio.uim_remote_server</name> |
| <version>1.0</version> |
| <interface> |
| <name>IUimRemoteServiceServer</name> |
| <instance>uimRemoteServer0</instance> |
| <instance>uimRemoteServer1</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.radio.uim</name> |
| <version>1.1-2</version> |
| <interface> |
| <name>IUim</name> |
| <instance>Uim0</instance> |
| <instance>Uim1</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.sensorscalibrate</name> |
| <version>1.0</version> |
| <interface> |
| <name>ISensorsCalibrate</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.soter</name> |
| <version>1.0</version> |
| <interface> |
| <name>ISoter</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.eid</name> |
| <version>1.0</version> |
| <interface> |
| <name>IEid</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.tui_comm</name> |
| <version>1.0</version> |
| <interface> |
| <name>ITuiComm</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.vpp</name> |
| <version>1.1-3</version> |
| <version>2.0</version> |
| <interface> |
| <name>IHidlVppService</name> |
| <instance>vppService</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.qconfig</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQConfig</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.dsp</name> |
| <version>1.0</version> |
| <interface> |
| <name>IDspService</name> |
| <instance>dspservice</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>android.hardware.wifi.supplicant</name> |
| <version>1.0-2</version> |
| <interface> |
| <name>ISupplicant</name> |
| <instance>default</instance> |
| <instance>wigigp2p</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.wigig.netperftuner</name> |
| <version>1.0</version> |
| <interface> |
| <name>INetPerfTuner</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.wigig.supptunnel</name> |
| <version>1.0</version> |
| <interface> |
| <name>ISuppTunnelProvider</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.fstman</name> |
| <version>1.0</version> |
| <interface> |
| <name>IFstManager</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.imsrtpservice</name> |
| <version>3.0</version> |
| <interface> |
| <name>IRTPService</name> |
| <instance>imsrtpservice</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.mstatservice</name> |
| <version>1.0</version> |
| <interface> |
| <name>IMStatService</name> |
| <instance>mstatservice</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.voiceprint</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQtiVoicePrintService</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>android.hardware.gnss</name> |
| <version>1.0-1</version> |
| <version>2.0-1</version> |
| <interface> |
| <name>IGnss</name> |
| <instance>gnss_vendor</instance> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.gnss</name> |
| <version>1.0-2</version> |
| <version>2.0-1</version> |
| <version>3.0</version> |
| <version>4.0-1</version> |
| <interface> |
| <name>ILocHidlGnss</name> |
| <instance>gnss_vendor</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.gnss</name> |
| <interface> |
| <name>ILocAidlGnss</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.wifi.supplicant</name> |
| <version>2.0-3</version> |
| <interface> |
| <name>ISupplicantVendor</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.wifi.hostapd</name> |
| <version>1.0-3</version> |
| <interface> |
| <name>IHostapdVendor</name> |
| <instance>default</instance> |
| <instance>wigighostapd</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.ims.callinfo</name> |
| <version>1.0</version> |
| <interface> |
| <name>IService</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.data.factory</name> |
| <version>1.0</version> |
| <version>2.0-5</version> |
| <interface> |
| <name>IFactory</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.display.config</name> |
| <version>1.0-15</version> |
| <version>2.0</version> |
| <interface> |
| <name>IDisplayConfig</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.improvetouch.blobmanager</name> |
| <version>1.0</version> |
| <interface> |
| <name>IBlobManager</name> |
| <instance>BlobManagerService</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.improvetouch.gesturemanager</name> |
| <version>1.0</version> |
| <interface> |
| <name>IGestureManager</name> |
| <instance>GestureManagerService</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.improvetouch.touchcompanion</name> |
| <version>1.0</version> |
| <interface> |
| <name>ITouchCompanion</name> |
| <instance>TouchCompanionService</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.wipower</name> |
| <version>1.0</version> |
| <interface> |
| <name>IWipower</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.fingerprint</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQtiExtendedFingerprint</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- Memory PASR HAL --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.memory.pasrmanager</name> |
| <transport>hwbinder</transport> |
| <version>1.0-1</version> |
| <interface> |
| <name>IPasrManager</name> |
| <instance>pasrhal</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.power.pasrmanager</name> |
| <version>1.0</version> |
| <interface> |
| <name>IPasrManager</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.power.powermodule</name> |
| <version>1.0</version> |
| <interface> |
| <name>IPowerModule</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>android.hardware.radio.config</name> |
| <version>1.0-1</version> |
| <interface> |
| <name>IRadioConfig</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.capabilityconfigstore</name> |
| <version>1.0</version> |
| <interface> |
| <name>ICapabilityConfigStore</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.data.iwlan</name> |
| <version>1.0-1</version> |
| <interface> |
| <name>IIWlan</name> |
| <instance>slot1</instance> |
| <instance>slot2</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.cvp</name> |
| <version>1.0</version> |
| <interface> |
| <name>ICvp</name> |
| <instance>cvphalservice</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.audiohalext</name> |
| <version>1.0</version> |
| <interface> |
| <name>IAudioHalExt</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- Codec2 HAl service --> |
| <hal format="hidl" optional="true"> |
| <name>android.hardware.media.c2</name> |
| <version>1.0</version> |
| <version>1.2</version> |
| <interface> |
| <name>IComponentStore</name> |
| <instance>default</instance> |
| <instance>software</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.display.allocator</name> |
| <version>1.0</version> |
| <version>3.0</version> |
| <version>4.0</version> |
| <interface> |
| <name>IQtiAllocator</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.display.mapper</name> |
| <version>2.0</version> |
| <version>3.0</version> |
| <version>4.0</version> |
| <interface> |
| <name>IQtiMapper</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.display.composer</name> |
| <version>2.0-1</version> |
| <version>3.0</version> |
| <version>3.1</version> |
| <interface> |
| <name>IQtiComposer</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- QSPM-HAL service--> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.qspmhal</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQspmhal</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.diaghal</name> |
| <version>1.0</version> |
| <interface> |
| <name>Idiag</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- BluetoothSar service--> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.bluetooth_sar</name> |
| <version>1.0-1</version> |
| <interface> |
| <name>IBluetoothSar</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- WifiStats HAL service--> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.wifi.wifilearner</name> |
| <version>1.0</version> |
| <interface> |
| <name>IWifiStats</name> |
| <instance>wifiStats</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>android.hardware.automotive.evs</name> |
| <version>1.1</version> |
| <interface> |
| <name>IEvsEnumerator</name> |
| <instance>default</instance> |
| <instance>hw/1</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.automotive.qcarcam</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQcarCamera</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- System Helper HAL Service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.systemhelper</name> |
| <version>1.0</version> |
| <interface> |
| <name>ISystemEvent</name> |
| <instance>default</instance> |
| </interface> |
| <interface> |
| <name>ISystemResource</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| |
| <!-- Trusted UI HAL Service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.trustedui</name> |
| <version>1.0-2</version> |
| <interface> |
| <name>ITrustedUI</name> |
| <instance>default</instance> |
| <instance>qtee-vm</instance> |
| </interface> |
| <interface> |
| <name>ITrustedInput</name> |
| <instance>default</instance> |
| <instance>qtee-vm</instance> |
| </interface> |
| </hal> |
| <!-- Secure image data processor HAL Service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.secureprocessor.device</name> |
| <version>1.0</version> |
| <interface> |
| <name>ISecureProcessor</name> |
| <instance>qti-tee</instance> |
| </interface> |
| </hal> |
| <!-- cryptfshw HAL service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.cryptfshw</name> |
| <version>1.0</version> |
| <interface> |
| <name>ICryptfsHw</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- SERVICETRACKER HAL service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.servicetracker</name> |
| <transport>hwbinder</transport> |
| <version>1.0-2</version> |
| <interface> |
| <name>IServicetracker</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- Camera PostProcessing service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.camera.postproc</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>IPostProcService</name> |
| <instance>camerapostprocservice</instance> |
| </interface> |
| </hal> |
| <!-- Camera AON service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.camera.aon</name> |
| <transport>hwbinder</transport> |
| <version>1.0-1</version> |
| <interface> |
| <name>IAONService</name> |
| <instance>aoncameraservice</instance> |
| </interface> |
| </hal> |
| <!-- eMBMS HAL service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.embmssl</name> |
| <version>1.0-1</version> |
| <interface> |
| <name>IEmbms</name> |
| <instance>embmsslServer0</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.qccvndhal</name> |
| <version>1.0</version> |
| <interface> |
| <name>IQccvndhal</name> |
| <instance>qccvndhal</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.ims.factory</name> |
| <version>1.0-1</version> |
| <version>2.0-2</version> |
| <interface> |
| <name>IImsFactory</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.spu</name> |
| <version>1.0-1</version> |
| <version>2.0</version> |
| <interface> |
| <name>ISPUManager</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- SlmAdapter HAL service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.slmadapter</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>ISlmAdapter</name> |
| <instance>SlmAdapter</instance> |
| </interface> |
| </hal> |
| <!-- MwqemAdapter HAL service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.mwqemadapter</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>IMwqemAdapter</name> |
| <instance>MwqemAdapter</instance> |
| </interface> |
| </hal> |
| <!-- DpmService HAL service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.dpmservice</name> |
| <transport>hwbinder</transport> |
| <version>1.0-1</version> |
| <interface> |
| <name>IDpmService</name> |
| <instance>DpmService</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.qccsyshal</name> |
| <transport>hwbinder</transport> |
| <version>1.0-1</version> |
| <interface> |
| <name>IQccsyshal</name> |
| <instance>qccsyshal</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.limits</name> |
| <transport>hwbinder</transport> |
| <version>1.0-1</version> |
| <interface> |
| <name>ILimits</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- Audio Graph Manager service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.AGMIPC</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>IAGM</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- Audio Platform adatation service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.pal</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>IPAL</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- Listen Sound Model Lib service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.ListenSoundModel</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>IListenSoundModel</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.wifi.wifimyftm</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>IWifiMyFtm</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.display.config</name> |
| <version>1-5</version> |
| <interface> |
| <name>IDisplayConfig</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.wifi.wificfr</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>IWificfr</name> |
| <instance>wificfr</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.qesdhal</name> |
| <transport>hwbinder</transport> |
| <version>1.0-1</version> |
| <interface> |
| <name>IQesdhal</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.hardware.sxrhal</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>ISxrCrypto</name> |
| <instance>sxrhalservice</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.qxr</name> |
| <interface> |
| <name>IQXRCoreService</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.qxr</name> |
| <interface> |
| <name>IQXRCamService</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.qxr</name> |
| <interface> |
| <name>IQXRSplitService</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.qxr</name> |
| <interface> |
| <name>IQXRModService</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="aidl" optional="true"> |
| <name>vendor.qti.hardware.qxr</name> |
| <interface> |
| <name>IQXRAudioService</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <!-- IDvr HAL service --> |
| <hal format="hidl" optional="true"> |
| <name>vendor.qti.dvr</name> |
| <transport>hwbinder</transport> |
| <version>1.0</version> |
| <interface> |
| <name>IDvrDisplay</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| <hal format="hidl" optional="true"> |
| <name>vendor.shadowcreator.hardware.nordic</name> |
| <impl level="generic"></impl> |
| <version>1.0</version> |
| <interface> |
| <name>INordic</name> |
| <instance>default</instance> |
| </interface> |
| </hal> |
| </compatibility-matrix> |