| |
| /* Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| #ifndef _PDG_RESPONSE_RATE_SETTING_H_ |
| #define _PDG_RESPONSE_RATE_SETTING_H_ |
| #if !defined(__ASSEMBLER__) |
| #endif |
| |
| #include "mlo_sta_id_details.h" |
| #define NUM_OF_DWORDS_PDG_RESPONSE_RATE_SETTING 7 |
| |
| |
| struct pdg_response_rate_setting { |
| #ifndef WIFI_BIT_ORDER_BIG_ENDIAN |
| uint32_t reserved_0a : 1, // [0:0] |
| tx_antenna_sector_ctrl : 24, // [24:1] |
| pkt_type : 4, // [28:25] |
| smoothing : 1, // [29:29] |
| ldpc : 1, // [30:30] |
| stbc : 1; // [31:31] |
| uint32_t alt_tx_pwr : 8, // [7:0] |
| alt_min_tx_pwr : 8, // [15:8] |
| alt_nss : 3, // [18:16] |
| alt_tx_chain_mask : 8, // [26:19] |
| alt_bw : 3, // [29:27] |
| stf_ltf_3db_boost : 1, // [30:30] |
| force_extra_symbol : 1; // [31:31] |
| uint32_t alt_rate_mcs : 4, // [3:0] |
| nss : 3, // [6:4] |
| dpd_enable : 1, // [7:7] |
| tx_pwr : 8, // [15:8] |
| min_tx_pwr : 8, // [23:16] |
| tx_chain_mask : 8; // [31:24] |
| uint32_t reserved_3a : 8, // [7:0] |
| sgi : 2, // [9:8] |
| rate_mcs : 4, // [13:10] |
| reserved_3b : 2, // [15:14] |
| tx_pwr_1 : 8, // [23:16] |
| alt_tx_pwr_1 : 8; // [31:24] |
| uint32_t aggregation : 1, // [0:0] |
| dot11ax_bss_color_id : 6, // [6:1] |
| dot11ax_spatial_reuse : 4, // [10:7] |
| dot11ax_cp_ltf_size : 2, // [12:11] |
| dot11ax_dcm : 1, // [13:13] |
| dot11ax_doppler_indication : 1, // [14:14] |
| dot11ax_su_extended : 1, // [15:15] |
| dot11ax_min_packet_extension : 2, // [17:16] |
| dot11ax_pe_nss : 3, // [20:18] |
| dot11ax_pe_content : 1, // [21:21] |
| dot11ax_pe_ltf_size : 2, // [23:22] |
| dot11ax_chain_csd_en : 1, // [24:24] |
| dot11ax_pe_chain_csd_en : 1, // [25:25] |
| dot11ax_dl_ul_flag : 1, // [26:26] |
| reserved_4a : 5; // [31:27] |
| uint32_t dot11ax_ext_ru_start_index : 4, // [3:0] |
| dot11ax_ext_ru_size : 4, // [7:4] |
| eht_duplicate_mode : 2, // [9:8] |
| he_sigb_dcm : 1, // [10:10] |
| he_sigb_0_mcs : 3, // [13:11] |
| num_he_sigb_sym : 5, // [18:14] |
| required_response_time_source : 1, // [19:19] |
| reserved_5a : 6, // [25:20] |
| u_sig_puncture_pattern_encoding : 6; // [31:26] |
| struct mlo_sta_id_details mlo_sta_id_details_rx; |
| uint16_t required_response_time : 12, // [27:16] |
| dot11be_params_placeholder : 4; // [31:28] |
| #else |
| uint32_t stbc : 1, // [31:31] |
| ldpc : 1, // [30:30] |
| smoothing : 1, // [29:29] |
| pkt_type : 4, // [28:25] |
| tx_antenna_sector_ctrl : 24, // [24:1] |
| reserved_0a : 1; // [0:0] |
| uint32_t force_extra_symbol : 1, // [31:31] |
| stf_ltf_3db_boost : 1, // [30:30] |
| alt_bw : 3, // [29:27] |
| alt_tx_chain_mask : 8, // [26:19] |
| alt_nss : 3, // [18:16] |
| alt_min_tx_pwr : 8, // [15:8] |
| alt_tx_pwr : 8; // [7:0] |
| uint32_t tx_chain_mask : 8, // [31:24] |
| min_tx_pwr : 8, // [23:16] |
| tx_pwr : 8, // [15:8] |
| dpd_enable : 1, // [7:7] |
| nss : 3, // [6:4] |
| alt_rate_mcs : 4; // [3:0] |
| uint32_t alt_tx_pwr_1 : 8, // [31:24] |
| tx_pwr_1 : 8, // [23:16] |
| reserved_3b : 2, // [15:14] |
| rate_mcs : 4, // [13:10] |
| sgi : 2, // [9:8] |
| reserved_3a : 8; // [7:0] |
| uint32_t reserved_4a : 5, // [31:27] |
| dot11ax_dl_ul_flag : 1, // [26:26] |
| dot11ax_pe_chain_csd_en : 1, // [25:25] |
| dot11ax_chain_csd_en : 1, // [24:24] |
| dot11ax_pe_ltf_size : 2, // [23:22] |
| dot11ax_pe_content : 1, // [21:21] |
| dot11ax_pe_nss : 3, // [20:18] |
| dot11ax_min_packet_extension : 2, // [17:16] |
| dot11ax_su_extended : 1, // [15:15] |
| dot11ax_doppler_indication : 1, // [14:14] |
| dot11ax_dcm : 1, // [13:13] |
| dot11ax_cp_ltf_size : 2, // [12:11] |
| dot11ax_spatial_reuse : 4, // [10:7] |
| dot11ax_bss_color_id : 6, // [6:1] |
| aggregation : 1; // [0:0] |
| uint32_t u_sig_puncture_pattern_encoding : 6, // [31:26] |
| reserved_5a : 6, // [25:20] |
| required_response_time_source : 1, // [19:19] |
| num_he_sigb_sym : 5, // [18:14] |
| he_sigb_0_mcs : 3, // [13:11] |
| he_sigb_dcm : 1, // [10:10] |
| eht_duplicate_mode : 2, // [9:8] |
| dot11ax_ext_ru_size : 4, // [7:4] |
| dot11ax_ext_ru_start_index : 4; // [3:0] |
| uint32_t dot11be_params_placeholder : 4, // [31:28] |
| required_response_time : 12; // [27:16] |
| struct mlo_sta_id_details mlo_sta_id_details_rx; |
| #endif |
| }; |
| |
| |
| /* Description RESERVED_0A |
| |
| |
| <legal 0> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_0A_OFFSET 0x00000000 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_0A_LSB 0 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_0A_MSB 0 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_0A_MASK 0x00000001 |
| |
| |
| /* Description TX_ANTENNA_SECTOR_CTRL |
| |
| Sectored transmit antenna |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_TX_ANTENNA_SECTOR_CTRL_OFFSET 0x00000000 |
| #define PDG_RESPONSE_RATE_SETTING_TX_ANTENNA_SECTOR_CTRL_LSB 1 |
| #define PDG_RESPONSE_RATE_SETTING_TX_ANTENNA_SECTOR_CTRL_MSB 24 |
| #define PDG_RESPONSE_RATE_SETTING_TX_ANTENNA_SECTOR_CTRL_MASK 0x01fffffe |
| |
| |
| /* Description PKT_TYPE |
| |
| Packet type: |
| <enum 0 dot11a>802.11a PPDU type |
| <enum 1 dot11b>802.11b PPDU type |
| <enum 2 dot11n_mm>802.11n Mixed Mode PPDU type |
| <enum 3 dot11ac>802.11ac PPDU type |
| <enum 4 dot11ax>802.11ax PPDU type |
| <enum 5 dot11ba>802.11ba (WUR) PPDU type |
| <enum 6 dot11be>802.11be PPDU type |
| <enum 7 dot11az>802.11az (ranging) PPDU type |
| <enum 8 dot11n_gf>802.11n Green Field PPDU type (unsupported |
| & aborted) |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_PKT_TYPE_OFFSET 0x00000000 |
| #define PDG_RESPONSE_RATE_SETTING_PKT_TYPE_LSB 25 |
| #define PDG_RESPONSE_RATE_SETTING_PKT_TYPE_MSB 28 |
| #define PDG_RESPONSE_RATE_SETTING_PKT_TYPE_MASK 0x1e000000 |
| |
| |
| /* Description SMOOTHING |
| |
| This field is used by PDG to populate the SMOOTHING filed |
| in the SIG Preamble of the PPDU |
| <legal 0-1> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_SMOOTHING_OFFSET 0x00000000 |
| #define PDG_RESPONSE_RATE_SETTING_SMOOTHING_LSB 29 |
| #define PDG_RESPONSE_RATE_SETTING_SMOOTHING_MSB 29 |
| #define PDG_RESPONSE_RATE_SETTING_SMOOTHING_MASK 0x20000000 |
| |
| |
| /* Description LDPC |
| |
| When set, use LDPC transmission rates |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_LDPC_OFFSET 0x00000000 |
| #define PDG_RESPONSE_RATE_SETTING_LDPC_LSB 30 |
| #define PDG_RESPONSE_RATE_SETTING_LDPC_MSB 30 |
| #define PDG_RESPONSE_RATE_SETTING_LDPC_MASK 0x40000000 |
| |
| |
| /* Description STBC |
| |
| When set, use STBC transmission rates |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_STBC_OFFSET 0x00000000 |
| #define PDG_RESPONSE_RATE_SETTING_STBC_LSB 31 |
| #define PDG_RESPONSE_RATE_SETTING_STBC_MSB 31 |
| #define PDG_RESPONSE_RATE_SETTING_STBC_MASK 0x80000000 |
| |
| |
| /* Description ALT_TX_PWR |
| |
| Coex related AlternativeTransmit parameter |
| |
| Transmit Power in s6.2 format. |
| In units of 0.25 dBm |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_PWR_OFFSET 0x00000004 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_PWR_LSB 0 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_PWR_MSB 7 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_PWR_MASK 0x000000ff |
| |
| |
| /* Description ALT_MIN_TX_PWR |
| |
| Coex related Alternative Transmit parameter |
| |
| Minimum allowed Transmit Power in s6.2 format. |
| In units of 0.25 dBm |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_ALT_MIN_TX_PWR_OFFSET 0x00000004 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_MIN_TX_PWR_LSB 8 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_MIN_TX_PWR_MSB 15 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_MIN_TX_PWR_MASK 0x0000ff00 |
| |
| |
| /* Description ALT_NSS |
| |
| Coex related Alternative Transmit parameter |
| |
| Number of spatial streams. |
| |
| <enum 0 1_spatial_stream>Single spatial stream |
| <enum 1 2_spatial_streams>2 spatial streams |
| <enum 2 3_spatial_streams>3 spatial streams |
| <enum 3 4_spatial_streams>4 spatial streams |
| <enum 4 5_spatial_streams>5 spatial streams |
| <enum 5 6_spatial_streams>6 spatial streams |
| <enum 6 7_spatial_streams>7 spatial streams |
| <enum 7 8_spatial_streams>8 spatial streams |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_ALT_NSS_OFFSET 0x00000004 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_NSS_LSB 16 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_NSS_MSB 18 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_NSS_MASK 0x00070000 |
| |
| |
| /* Description ALT_TX_CHAIN_MASK |
| |
| Coex related Alternative Transmit parameter |
| |
| Chain mask to support up to 8 antennas. |
| <legal 1-255> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_CHAIN_MASK_OFFSET 0x00000004 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_CHAIN_MASK_LSB 19 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_CHAIN_MASK_MSB 26 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_CHAIN_MASK_MASK 0x07f80000 |
| |
| |
| /* Description ALT_BW |
| |
| Coex related Alternative Transmit parameter |
| |
| The BW of the upcoming transmission. |
| |
| <enum 0 20_mhz>20 Mhz BW |
| <enum 1 40_mhz>40 Mhz BW |
| <enum 2 80_mhz>80 Mhz BW |
| <enum 3 160_mhz>160 Mhz BW |
| <enum 4 320_mhz>320 Mhz BW |
| <enum 5 240_mhz>240 Mhz BW |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_ALT_BW_OFFSET 0x00000004 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_BW_LSB 27 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_BW_MSB 29 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_BW_MASK 0x38000000 |
| |
| |
| /* Description STF_LTF_3DB_BOOST |
| |
| Boost the STF and LTF power by 3dB in 11a/n/ac packets. |
| This includes both the legacy preambles and the HT/VHT preambles.0: |
| disable power boost1: enable power boost |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_STF_LTF_3DB_BOOST_OFFSET 0x00000004 |
| #define PDG_RESPONSE_RATE_SETTING_STF_LTF_3DB_BOOST_LSB 30 |
| #define PDG_RESPONSE_RATE_SETTING_STF_LTF_3DB_BOOST_MSB 30 |
| #define PDG_RESPONSE_RATE_SETTING_STF_LTF_3DB_BOOST_MASK 0x40000000 |
| |
| |
| /* Description FORCE_EXTRA_SYMBOL |
| |
| Set to 1 to force an extra OFDM symbol (or symbols) even |
| if the PPDU encoding process does not result in an extra |
| OFDM symbol (or symbols) |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_FORCE_EXTRA_SYMBOL_OFFSET 0x00000004 |
| #define PDG_RESPONSE_RATE_SETTING_FORCE_EXTRA_SYMBOL_LSB 31 |
| #define PDG_RESPONSE_RATE_SETTING_FORCE_EXTRA_SYMBOL_MSB 31 |
| #define PDG_RESPONSE_RATE_SETTING_FORCE_EXTRA_SYMBOL_MASK 0x80000000 |
| |
| |
| /* Description ALT_RATE_MCS |
| |
| Coex related Alternative Transmit parameter |
| |
| For details, refer to MCS_TYPE |
| Note: This is "rate" in case of 11a/11b |
| description |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_ALT_RATE_MCS_OFFSET 0x00000008 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_RATE_MCS_LSB 0 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_RATE_MCS_MSB 3 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_RATE_MCS_MASK 0x0000000f |
| |
| |
| /* Description NSS |
| |
| Number of spatial streams. |
| |
| <enum 0 1_spatial_stream>Single spatial stream |
| <enum 1 2_spatial_streams>2 spatial streams |
| <enum 2 3_spatial_streams>3 spatial streams |
| <enum 3 4_spatial_streams>4 spatial streams |
| <enum 4 5_spatial_streams>5 spatial streams |
| <enum 5 6_spatial_streams>6 spatial streams |
| <enum 6 7_spatial_streams>7 spatial streams |
| <enum 7 8_spatial_streams>8 spatial streams |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_NSS_OFFSET 0x00000008 |
| #define PDG_RESPONSE_RATE_SETTING_NSS_LSB 4 |
| #define PDG_RESPONSE_RATE_SETTING_NSS_MSB 6 |
| #define PDG_RESPONSE_RATE_SETTING_NSS_MASK 0x00000070 |
| |
| |
| /* Description DPD_ENABLE |
| |
| DPD enable control |
| |
| This is needed on a per packet basis |
| <enum 0 dpd_off> DPD profile not applied to current |
| packet |
| <enum 1 dpd_on> DPD profile applied to current packet |
| if available |
| <legal 0-1> |
| |
| This field is not applicable in11ah mode of operation and |
| is ignored by the HW |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DPD_ENABLE_OFFSET 0x00000008 |
| #define PDG_RESPONSE_RATE_SETTING_DPD_ENABLE_LSB 7 |
| #define PDG_RESPONSE_RATE_SETTING_DPD_ENABLE_MSB 7 |
| #define PDG_RESPONSE_RATE_SETTING_DPD_ENABLE_MASK 0x00000080 |
| |
| |
| /* Description TX_PWR |
| |
| Transmit Power in s6.2 format. |
| In units of 0.25 dBm |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_TX_PWR_OFFSET 0x00000008 |
| #define PDG_RESPONSE_RATE_SETTING_TX_PWR_LSB 8 |
| #define PDG_RESPONSE_RATE_SETTING_TX_PWR_MSB 15 |
| #define PDG_RESPONSE_RATE_SETTING_TX_PWR_MASK 0x0000ff00 |
| |
| |
| /* Description MIN_TX_PWR |
| |
| Coex related field: |
| |
| Minimum allowed Transmit Power in s6.2 format. |
| In units of 0.25 dBm |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_MIN_TX_PWR_OFFSET 0x00000008 |
| #define PDG_RESPONSE_RATE_SETTING_MIN_TX_PWR_LSB 16 |
| #define PDG_RESPONSE_RATE_SETTING_MIN_TX_PWR_MSB 23 |
| #define PDG_RESPONSE_RATE_SETTING_MIN_TX_PWR_MASK 0x00ff0000 |
| |
| |
| /* Description TX_CHAIN_MASK |
| |
| Chain mask to support up to 8 antennas. |
| <legal 1-255> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_TX_CHAIN_MASK_OFFSET 0x00000008 |
| #define PDG_RESPONSE_RATE_SETTING_TX_CHAIN_MASK_LSB 24 |
| #define PDG_RESPONSE_RATE_SETTING_TX_CHAIN_MASK_MSB 31 |
| #define PDG_RESPONSE_RATE_SETTING_TX_CHAIN_MASK_MASK 0xff000000 |
| |
| |
| /* Description RESERVED_3A |
| |
| <legal 0> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_3A_OFFSET 0x0000000c |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_3A_LSB 0 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_3A_MSB 7 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_3A_MASK 0x000000ff |
| |
| |
| /* Description SGI |
| |
| Field only valid when pkt type is HT or VHT.For 11ax see |
| field Dot11ax_CP_LTF_size |
| |
| <enum 0 0_8_us_sgi > Legacy normal GI. Can also be used |
| for HE |
| <enum 1 0_4_us_sgi > Legacy short GI. Can also be used |
| for HE |
| <enum 2 1_6_us_sgi > Not used for pre 11ax pkt_types. |
| |
| <enum 3 3_2_us_sgi > Not used for pre 11ax pkt_types |
| |
| |
| <legal 0 - 3> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_SGI_OFFSET 0x0000000c |
| #define PDG_RESPONSE_RATE_SETTING_SGI_LSB 8 |
| #define PDG_RESPONSE_RATE_SETTING_SGI_MSB 9 |
| #define PDG_RESPONSE_RATE_SETTING_SGI_MASK 0x00000300 |
| |
| |
| /* Description RATE_MCS |
| |
| For details, refer to MCS_TYPE description |
| Note: This is "rate" in case of 11a/11b |
| |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_RATE_MCS_OFFSET 0x0000000c |
| #define PDG_RESPONSE_RATE_SETTING_RATE_MCS_LSB 10 |
| #define PDG_RESPONSE_RATE_SETTING_RATE_MCS_MSB 13 |
| #define PDG_RESPONSE_RATE_SETTING_RATE_MCS_MASK 0x00003c00 |
| |
| |
| /* Description RESERVED_3B |
| |
| <legal 0> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_3B_OFFSET 0x0000000c |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_3B_LSB 14 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_3B_MSB 15 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_3B_MASK 0x0000c000 |
| |
| |
| /* Description TX_PWR_1 |
| |
| Default (desired) transmit parameter for the second chain |
| |
| |
| Transmit Power in s6.2 format. |
| In units of 0.25 dBm |
| |
| Note that there is no Min value for this |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_TX_PWR_1_OFFSET 0x0000000c |
| #define PDG_RESPONSE_RATE_SETTING_TX_PWR_1_LSB 16 |
| #define PDG_RESPONSE_RATE_SETTING_TX_PWR_1_MSB 23 |
| #define PDG_RESPONSE_RATE_SETTING_TX_PWR_1_MASK 0x00ff0000 |
| |
| |
| /* Description ALT_TX_PWR_1 |
| |
| Alternate (desired) transmit parameter for the second chain |
| |
| |
| Transmit Power in s6.2 format. |
| In units of 0.25 dBm |
| |
| Note that there is no Min value for this |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_PWR_1_OFFSET 0x0000000c |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_PWR_1_LSB 24 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_PWR_1_MSB 31 |
| #define PDG_RESPONSE_RATE_SETTING_ALT_TX_PWR_1_MASK 0xff000000 |
| |
| |
| /* Description AGGREGATION |
| |
| Field only valid in case of pkt_type == 11n |
| |
| <enum 0 mpdu> Indicates MPDU format. TXPCU will select |
| this setting if the CBF response only contains a single |
| segment |
| <enum 1 a_mpdu> Indicates A-MPDU format. TXPCU will |
| select this setting if the CBF response will contain two |
| or more segments |
| <legal 0-1> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_AGGREGATION_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_AGGREGATION_LSB 0 |
| #define PDG_RESPONSE_RATE_SETTING_AGGREGATION_MSB 0 |
| #define PDG_RESPONSE_RATE_SETTING_AGGREGATION_MASK 0x00000001 |
| |
| |
| /* Description DOT11AX_BSS_COLOR_ID |
| |
| BSS color of the nextwork to which this STA belongs. |
| When generated by TXPCU, this field is set equal to: Dot11ax_received_Bss_color_id |
| |
| |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_BSS_COLOR_ID_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_BSS_COLOR_ID_LSB 1 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_BSS_COLOR_ID_MSB 6 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_BSS_COLOR_ID_MASK 0x0000007e |
| |
| |
| /* Description DOT11AX_SPATIAL_REUSE |
| |
| This field is only valid for pkt_type == 11ax |
| |
| Spatial re-use |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_SPATIAL_REUSE_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_SPATIAL_REUSE_LSB 7 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_SPATIAL_REUSE_MSB 10 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_SPATIAL_REUSE_MASK 0x00000780 |
| |
| |
| /* Description DOT11AX_CP_LTF_SIZE |
| |
| field is only valid for pkt_type == 11ax |
| |
| Indicates the CP and HE-LTF type |
| |
| <enum 0 OneX_LTF_0_8CP> 1xLTF + 0.8 us CP |
| <enum 1 TwoX_LTF_0_8CP> 2x LTF + 0.8 µs CP |
| <enum 2 TwoX_LTF_1_6CP> 2x LTF + 1.6 µs CP |
| <enum 3 FourX_LTF_0_8CP_3_2CP> |
| When DCM == 0 OR STBC == 0: 4x LTF + 3.2 µs CP |
| When DCM == 1 AND STBC == 1: 4x LTF + 0.8 µs CP. Note: |
| In this scenario, Neither DCM nor STBC is applied to HE |
| data field. |
| |
| If ( DCM == 1 ) and ( MCS > 0 ) and (STBC == 0) |
| 0 = 1xLTF + 0.4 usec |
| 1 = 2xLTF + 0.4 usec |
| 2~3 = Reserved |
| |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_CP_LTF_SIZE_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_CP_LTF_SIZE_LSB 11 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_CP_LTF_SIZE_MSB 12 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_CP_LTF_SIZE_MASK 0x00001800 |
| |
| |
| /* Description DOT11AX_DCM |
| |
| field is only valid for pkt_type == 11ax |
| |
| Indicates whether dual sub-carrier modulation is applied |
| |
| 0: No DCM |
| 1:DCM |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DCM_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DCM_LSB 13 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DCM_MSB 13 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DCM_MASK 0x00002000 |
| |
| |
| /* Description DOT11AX_DOPPLER_INDICATION |
| |
| field is only valid for pkt_type == 11ax |
| |
| 0: No Doppler support |
| 1: Doppler support |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DOPPLER_INDICATION_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DOPPLER_INDICATION_LSB 14 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DOPPLER_INDICATION_MSB 14 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DOPPLER_INDICATION_MASK 0x00004000 |
| |
| |
| /* Description DOT11AX_SU_EXTENDED |
| |
| field is only valid for pkt_type == 11ax OR pkt_type == |
| 11be |
| |
| When set, the 11ax or 11be frame is of the extended range |
| format |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_SU_EXTENDED_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_SU_EXTENDED_LSB 15 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_SU_EXTENDED_MSB 15 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_SU_EXTENDED_MASK 0x00008000 |
| |
| |
| /* Description DOT11AX_MIN_PACKET_EXTENSION |
| |
| field is only valid for pkt_type == 11ax OR pkt_type == |
| 11be |
| |
| The min packet extension duration for this user. |
| 0: no extension |
| 1: 8us |
| 2: 16 us |
| 3: 20 us (only for .11be) |
| <legal 0-3> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_MIN_PACKET_EXTENSION_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_MIN_PACKET_EXTENSION_LSB 16 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_MIN_PACKET_EXTENSION_MSB 17 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_MIN_PACKET_EXTENSION_MASK 0x00030000 |
| |
| |
| /* Description DOT11AX_PE_NSS |
| |
| Number of active spatial streams during packet extension. |
| |
| |
| <enum 0 1_spatial_stream>Single spatial stream |
| <enum 1 2_spatial_streams>2 spatial streams |
| <enum 2 3_spatial_streams>3 spatial streams |
| <enum 3 4_spatial_streams>4 spatial streams |
| <enum 4 5_spatial_streams>5 spatial streams |
| <enum 5 6_spatial_streams>6 spatial streams |
| <enum 6 7_spatial_streams>7 spatial streams |
| <enum 7 8_spatial_streams>8 spatial streams |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_NSS_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_NSS_LSB 18 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_NSS_MSB 20 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_NSS_MASK 0x001c0000 |
| |
| |
| /* Description DOT11AX_PE_CONTENT |
| |
| Content of packet extension. Valid for all 11ax packets |
| having packet extension |
| |
| 0-he_ltf, 1-last_data_symbol |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_CONTENT_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_CONTENT_LSB 21 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_CONTENT_MSB 21 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_CONTENT_MASK 0x00200000 |
| |
| |
| /* Description DOT11AX_PE_LTF_SIZE |
| |
| LTF size to be used during packet extention. . This field |
| is valid for both FTM and non-FTM packets. |
| 0-1x |
| 1-2x (unsupported un HWK-1) |
| 2-4x (unsupported un HWK-1) |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_LTF_SIZE_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_LTF_SIZE_LSB 22 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_LTF_SIZE_MSB 23 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_LTF_SIZE_MASK 0x00c00000 |
| |
| |
| /* Description DOT11AX_CHAIN_CSD_EN |
| |
| This field denotes whether to apply CSD on the preamble |
| and data portion of the packet. This field is valid for |
| all transmit packets |
| 0: disable per-chain csd |
| 1: enable per-chain csd |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_CHAIN_CSD_EN_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_CHAIN_CSD_EN_LSB 24 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_CHAIN_CSD_EN_MSB 24 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_CHAIN_CSD_EN_MASK 0x01000000 |
| |
| |
| /* Description DOT11AX_PE_CHAIN_CSD_EN |
| |
| This field denotes whether to apply CSD on the packet extension |
| portion of the packet. This field is valid for all 11ax |
| packets. |
| 0: disable per-chain csd |
| 1: enable per-chain csd |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_CHAIN_CSD_EN_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_CHAIN_CSD_EN_LSB 25 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_CHAIN_CSD_EN_MSB 25 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_PE_CHAIN_CSD_EN_MASK 0x02000000 |
| |
| |
| /* Description DOT11AX_DL_UL_FLAG |
| |
| field is only valid for pkt_type == 11ax |
| |
| <enum 0 DL_UL_FLAG_IS_DL_OR_TDLS> |
| <enum 1 DL_UL_FLAG_IS_UL> |
| |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DL_UL_FLAG_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DL_UL_FLAG_LSB 26 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DL_UL_FLAG_MSB 26 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_DL_UL_FLAG_MASK 0x04000000 |
| |
| |
| /* Description RESERVED_4A |
| |
| <legal 0> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_4A_OFFSET 0x00000010 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_4A_LSB 27 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_4A_MSB 31 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_4A_MASK 0xf8000000 |
| |
| |
| /* Description DOT11AX_EXT_RU_START_INDEX |
| |
| field is only valid for pkt_type == 11ax and Dot11ax_su_extended |
| == 1 |
| |
| RU Number to which User is assigned |
| |
| The RU numbering bitwidth is only enough to cover the 20MHz |
| BW that extended range allows |
| <legal 0-8> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_EXT_RU_START_INDEX_OFFSET 0x00000014 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_EXT_RU_START_INDEX_LSB 0 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_EXT_RU_START_INDEX_MSB 3 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_EXT_RU_START_INDEX_MASK 0x0000000f |
| |
| |
| /* Description DOT11AX_EXT_RU_SIZE |
| |
| field is only valid for pkt_type == 11ax and Dot11ax_su_extended |
| == 1 or pkt_type == 11be and EHT_duplicate_mode == 1 |
| |
| The size of the RU for this user. |
| |
| In case of EHT duplicate transmissions, this field indicates |
| the width of the actual content before duplication, e.g. |
| a 40 MHz PPDU duplicated to 160 MHz will have the bandwidth |
| fields indicating 160 MHz and this field set to e-num 4 |
| (RU_484). |
| |
| <enum 0 RU_26> |
| <enum 1 RU_52> |
| <enum 2 RU_106> |
| <enum 3 RU_242> |
| <enum 4 RU_484> |
| <enum 5 RU_996> |
| <enum 6 RU_1992> |
| <enum 7 RU_FULLBW> Set when the RU occupies the full packet |
| bandwidth |
| <enum 8 RU_FULLBW_240> Set when the RU occupies the full |
| packet bandwidth |
| <enum 9 RU_FULLBW_320> Set when the RU occupies the full |
| packet bandwidth |
| <enum 10 RU_MULTI_LARGE> DO NOT USE |
| <enum 11 RU_78> DO NOT USE |
| <enum 12 RU_132> DO NOT USE |
| <legal 0-12> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_EXT_RU_SIZE_OFFSET 0x00000014 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_EXT_RU_SIZE_LSB 4 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_EXT_RU_SIZE_MSB 7 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11AX_EXT_RU_SIZE_MASK 0x000000f0 |
| |
| |
| /* Description EHT_DUPLICATE_MODE |
| |
| Field only valid for pkt_type == 11be |
| |
| Indicates EHT duplicate modulation |
| |
| <enum 0 eht_no_duplicate> |
| <enum 1 eht_2x_duplicate> |
| <enum 2 eht_4x_duplicate> |
| |
| <legal 0-2> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_EHT_DUPLICATE_MODE_OFFSET 0x00000014 |
| #define PDG_RESPONSE_RATE_SETTING_EHT_DUPLICATE_MODE_LSB 8 |
| #define PDG_RESPONSE_RATE_SETTING_EHT_DUPLICATE_MODE_MSB 9 |
| #define PDG_RESPONSE_RATE_SETTING_EHT_DUPLICATE_MODE_MASK 0x00000300 |
| |
| |
| /* Description HE_SIGB_DCM |
| |
| Indicates whether dual sub-carrier modulation is applied |
| to EHT-SIG |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_HE_SIGB_DCM_OFFSET 0x00000014 |
| #define PDG_RESPONSE_RATE_SETTING_HE_SIGB_DCM_LSB 10 |
| #define PDG_RESPONSE_RATE_SETTING_HE_SIGB_DCM_MSB 10 |
| #define PDG_RESPONSE_RATE_SETTING_HE_SIGB_DCM_MASK 0x00000400 |
| |
| |
| /* Description HE_SIGB_0_MCS |
| |
| Indicates the MCS of EHT-SIG |
| |
| For details, refer to MCS_TYPE description |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_HE_SIGB_0_MCS_OFFSET 0x00000014 |
| #define PDG_RESPONSE_RATE_SETTING_HE_SIGB_0_MCS_LSB 11 |
| #define PDG_RESPONSE_RATE_SETTING_HE_SIGB_0_MCS_MSB 13 |
| #define PDG_RESPONSE_RATE_SETTING_HE_SIGB_0_MCS_MASK 0x00003800 |
| |
| |
| /* Description NUM_HE_SIGB_SYM |
| |
| Indicates the number of EHT-SIG symbols |
| |
| This field is 0-based with 0 indicating that 1 eht_sig symbol |
| needs to be transmitted. |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_NUM_HE_SIGB_SYM_OFFSET 0x00000014 |
| #define PDG_RESPONSE_RATE_SETTING_NUM_HE_SIGB_SYM_LSB 14 |
| #define PDG_RESPONSE_RATE_SETTING_NUM_HE_SIGB_SYM_MSB 18 |
| #define PDG_RESPONSE_RATE_SETTING_NUM_HE_SIGB_SYM_MASK 0x0007c000 |
| |
| |
| /* Description REQUIRED_RESPONSE_TIME_SOURCE |
| |
| <enum 0 reqd_resp_time_src_is_RXPCU> Typically from received |
| HT Control for sync MLO response |
| <enum 1 reqd_resp_time_src_is_FW> |
| Typically from 'PCU_PPDU_SETUP_INIT' for sync MLO response |
| to response |
| <legal all> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_REQUIRED_RESPONSE_TIME_SOURCE_OFFSET 0x00000014 |
| #define PDG_RESPONSE_RATE_SETTING_REQUIRED_RESPONSE_TIME_SOURCE_LSB 19 |
| #define PDG_RESPONSE_RATE_SETTING_REQUIRED_RESPONSE_TIME_SOURCE_MSB 19 |
| #define PDG_RESPONSE_RATE_SETTING_REQUIRED_RESPONSE_TIME_SOURCE_MASK 0x00080000 |
| |
| |
| /* Description RESERVED_5A |
| |
| <legal 0> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_5A_OFFSET 0x00000014 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_5A_LSB 20 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_5A_MSB 25 |
| #define PDG_RESPONSE_RATE_SETTING_RESERVED_5A_MASK 0x03f00000 |
| |
| |
| /* Description U_SIG_PUNCTURE_PATTERN_ENCODING |
| |
| 6-bit value copied from 'RX_RESPONSE_REQUIRED_INFO' and 'TX_CBF_INFO' |
| to pass on to PDG |
| <legal 0-29> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_U_SIG_PUNCTURE_PATTERN_ENCODING_OFFSET 0x00000014 |
| #define PDG_RESPONSE_RATE_SETTING_U_SIG_PUNCTURE_PATTERN_ENCODING_LSB 26 |
| #define PDG_RESPONSE_RATE_SETTING_U_SIG_PUNCTURE_PATTERN_ENCODING_MSB 31 |
| #define PDG_RESPONSE_RATE_SETTING_U_SIG_PUNCTURE_PATTERN_ENCODING_MASK 0xfc000000 |
| |
| |
| /* Description MLO_STA_ID_DETAILS_RX |
| |
| 16-bi value copied from 'RX_RESPONSE_REQUIRED_INFO' to pass |
| on to PDG |
| |
| Bits 10 and 11 are not valid, bits [9:0] reflect 'NSTR_MLO_STA_ID' |
| from address search. |
| |
| See definition of mlo_sta_id_details. |
| */ |
| |
| |
| /* Description NSTR_MLO_STA_ID |
| |
| ID of peer participating in non-STR MLO |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_OFFSET 0x00000018 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_LSB 0 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MSB 9 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_MASK 0x000003ff |
| |
| |
| /* Description BLOCK_SELF_ML_SYNC |
| |
| Only valid for TX |
| |
| When set, this provides an indication to block the peer |
| for self-link. |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_OFFSET 0x00000018 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_LSB 10 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MSB 10 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_BLOCK_SELF_ML_SYNC_MASK 0x00000400 |
| |
| |
| /* Description BLOCK_PARTNER_ML_SYNC |
| |
| Only valid for TX |
| |
| When set, this provides an indication to block the peer |
| for partner links. |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_OFFSET 0x00000018 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_LSB 11 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MSB 11 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_BLOCK_PARTNER_ML_SYNC_MASK 0x00000800 |
| |
| |
| /* Description NSTR_MLO_STA_ID_VALID |
| |
| All the fields in this TLV are valid only if this bit is |
| set. |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_OFFSET 0x00000018 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_LSB 12 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MSB 12 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_NSTR_MLO_STA_ID_VALID_MASK 0x00001000 |
| |
| |
| /* Description RESERVED_0A |
| |
| <legal 0> |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_RESERVED_0A_OFFSET 0x00000018 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_RESERVED_0A_LSB 13 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MSB 15 |
| #define PDG_RESPONSE_RATE_SETTING_MLO_STA_ID_DETAILS_RX_RESERVED_0A_MASK 0x0000e000 |
| |
| |
| /* Description REQUIRED_RESPONSE_TIME |
| |
| When non-zero, indicates that PDG shall pad the response |
| transmission to the indicated duration (in us) |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_REQUIRED_RESPONSE_TIME_OFFSET 0x00000018 |
| #define PDG_RESPONSE_RATE_SETTING_REQUIRED_RESPONSE_TIME_LSB 16 |
| #define PDG_RESPONSE_RATE_SETTING_REQUIRED_RESPONSE_TIME_MSB 27 |
| #define PDG_RESPONSE_RATE_SETTING_REQUIRED_RESPONSE_TIME_MASK 0x0fff0000 |
| |
| |
| /* Description DOT11BE_PARAMS_PLACEHOLDER |
| |
| 4 bytes for use as placeholders for 'Dot11be_*' parameters |
| |
| */ |
| |
| #define PDG_RESPONSE_RATE_SETTING_DOT11BE_PARAMS_PLACEHOLDER_OFFSET 0x00000018 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11BE_PARAMS_PLACEHOLDER_LSB 28 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11BE_PARAMS_PLACEHOLDER_MSB 31 |
| #define PDG_RESPONSE_RATE_SETTING_DOT11BE_PARAMS_PLACEHOLDER_MASK 0xf0000000 |
| |
| |
| |
| #endif // PDG_RESPONSE_RATE_SETTING |