| |
| /* Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| #ifndef _TX_CBF_INFO_H_ |
| #define _TX_CBF_INFO_H_ |
| #if !defined(__ASSEMBLER__) |
| #endif |
| |
| #define NUM_OF_DWORDS_TX_CBF_INFO 16 |
| |
| #define NUM_OF_QWORDS_TX_CBF_INFO 8 |
| |
| |
| struct tx_cbf_info { |
| #ifndef WIFI_BIT_ORDER_BIG_ENDIAN |
| uint32_t sw_peer_id : 16, // [15:0] |
| pre_cbf_duration : 16; // [31:16] |
| uint32_t brpoll_info_valid : 1, // [0:0] |
| trigger_brpoll_info_valid : 1, // [1:1] |
| npda_info_11ac_valid : 1, // [2:2] |
| npda_info_11ax_valid : 1, // [3:3] |
| dot11ax_su_extended : 1, // [4:4] |
| bandwidth : 3, // [7:5] |
| brpoll_info : 8, // [15:8] |
| cbf_response_table_base_index : 8, // [23:16] |
| peer_index : 3, // [26:24] |
| pkt_type : 4, // [30:27] |
| txop_duration_all_ones : 1; // [31:31] |
| uint32_t trigger_brpoll_common_info_15_0 : 16, // [15:0] |
| trigger_brpoll_common_info_31_16 : 16; // [31:16] |
| uint32_t trigger_brpoll_user_info_15_0 : 16, // [15:0] |
| trigger_brpoll_user_info_31_16 : 16; // [31:16] |
| uint32_t addr1_31_0 : 32; // [31:0] |
| uint32_t addr1_47_32 : 16, // [15:0] |
| addr2_15_0 : 16; // [31:16] |
| uint32_t addr2_47_16 : 32; // [31:0] |
| uint32_t addr3_31_0 : 32; // [31:0] |
| uint32_t addr3_47_32 : 16, // [15:0] |
| sta_partial_aid : 11, // [26:16] |
| reserved_8a : 4, // [30:27] |
| cbf_resp_pwr_mgmt : 1; // [31:31] |
| uint32_t group_id : 6, // [5:0] |
| rssi_comb : 8, // [13:6] |
| reserved_9a : 2, // [15:14] |
| vht_ndpa_sta_info : 16; // [31:16] |
| uint32_t he_eht_sta_info_15_0 : 16, // [15:0] |
| he_eht_sta_info_31_16 : 16; // [31:16] |
| uint32_t dot11ax_received_format_indication : 1, // [0:0] |
| dot11ax_received_dl_ul_flag : 1, // [1:1] |
| dot11ax_received_bss_color_id : 6, // [7:2] |
| dot11ax_received_spatial_reuse : 4, // [11:8] |
| dot11ax_received_cp_size : 2, // [13:12] |
| dot11ax_received_ltf_size : 2, // [15:14] |
| dot11ax_received_coding : 1, // [16:16] |
| dot11ax_received_dcm : 1, // [17:17] |
| dot11ax_received_doppler_indication : 1, // [18:18] |
| dot11ax_received_ext_ru_size : 4, // [22:19] |
| dot11ax_dl_ul_flag : 1, // [23:23] |
| reserved_11a : 8; // [31:24] |
| uint32_t sw_response_frame_length : 16, // [15:0] |
| sw_response_tlv_from_crypto : 1, // [16:16] |
| wait_sifs_config_valid : 1, // [17:17] |
| wait_sifs : 2, // [19:18] |
| ranging : 1, // [20:20] |
| secure : 1, // [21:21] |
| tb_ranging_response_required : 2, // [23:22] |
| reserved_12a : 2, // [25:24] |
| u_sig_puncture_pattern_encoding : 6; // [31:26] |
| uint32_t dot11be_puncture_bitmap : 16, // [15:0] |
| dot11be_response : 1, // [16:16] |
| punctured_response : 1, // [17:17] |
| npda_info_11be_valid : 1, // [18:18] |
| eht_duplicate_mode : 2, // [20:19] |
| reserved_13a : 11; // [31:21] |
| uint32_t eht_sta_info_39_32 : 8, // [7:0] |
| reserved_14a : 24; // [31:8] |
| uint32_t tlv64_padding : 32; // [31:0] |
| #else |
| uint32_t pre_cbf_duration : 16, // [31:16] |
| sw_peer_id : 16; // [15:0] |
| uint32_t txop_duration_all_ones : 1, // [31:31] |
| pkt_type : 4, // [30:27] |
| peer_index : 3, // [26:24] |
| cbf_response_table_base_index : 8, // [23:16] |
| brpoll_info : 8, // [15:8] |
| bandwidth : 3, // [7:5] |
| dot11ax_su_extended : 1, // [4:4] |
| npda_info_11ax_valid : 1, // [3:3] |
| npda_info_11ac_valid : 1, // [2:2] |
| trigger_brpoll_info_valid : 1, // [1:1] |
| brpoll_info_valid : 1; // [0:0] |
| uint32_t trigger_brpoll_common_info_31_16 : 16, // [31:16] |
| trigger_brpoll_common_info_15_0 : 16; // [15:0] |
| uint32_t trigger_brpoll_user_info_31_16 : 16, // [31:16] |
| trigger_brpoll_user_info_15_0 : 16; // [15:0] |
| uint32_t addr1_31_0 : 32; // [31:0] |
| uint32_t addr2_15_0 : 16, // [31:16] |
| addr1_47_32 : 16; // [15:0] |
| uint32_t addr2_47_16 : 32; // [31:0] |
| uint32_t addr3_31_0 : 32; // [31:0] |
| uint32_t cbf_resp_pwr_mgmt : 1, // [31:31] |
| reserved_8a : 4, // [30:27] |
| sta_partial_aid : 11, // [26:16] |
| addr3_47_32 : 16; // [15:0] |
| uint32_t vht_ndpa_sta_info : 16, // [31:16] |
| reserved_9a : 2, // [15:14] |
| rssi_comb : 8, // [13:6] |
| group_id : 6; // [5:0] |
| uint32_t he_eht_sta_info_31_16 : 16, // [31:16] |
| he_eht_sta_info_15_0 : 16; // [15:0] |
| uint32_t reserved_11a : 8, // [31:24] |
| dot11ax_dl_ul_flag : 1, // [23:23] |
| dot11ax_received_ext_ru_size : 4, // [22:19] |
| dot11ax_received_doppler_indication : 1, // [18:18] |
| dot11ax_received_dcm : 1, // [17:17] |
| dot11ax_received_coding : 1, // [16:16] |
| dot11ax_received_ltf_size : 2, // [15:14] |
| dot11ax_received_cp_size : 2, // [13:12] |
| dot11ax_received_spatial_reuse : 4, // [11:8] |
| dot11ax_received_bss_color_id : 6, // [7:2] |
| dot11ax_received_dl_ul_flag : 1, // [1:1] |
| dot11ax_received_format_indication : 1; // [0:0] |
| uint32_t u_sig_puncture_pattern_encoding : 6, // [31:26] |
| reserved_12a : 2, // [25:24] |
| tb_ranging_response_required : 2, // [23:22] |
| secure : 1, // [21:21] |
| ranging : 1, // [20:20] |
| wait_sifs : 2, // [19:18] |
| wait_sifs_config_valid : 1, // [17:17] |
| sw_response_tlv_from_crypto : 1, // [16:16] |
| sw_response_frame_length : 16; // [15:0] |
| uint32_t reserved_13a : 11, // [31:21] |
| eht_duplicate_mode : 2, // [20:19] |
| npda_info_11be_valid : 1, // [18:18] |
| punctured_response : 1, // [17:17] |
| dot11be_response : 1, // [16:16] |
| dot11be_puncture_bitmap : 16; // [15:0] |
| uint32_t reserved_14a : 24, // [31:8] |
| eht_sta_info_39_32 : 8; // [7:0] |
| uint32_t tlv64_padding : 32; // [31:0] |
| #endif |
| }; |
| |
| |
| /* Description SW_PEER_ID |
| |
| An identifier indicating from which AP this CBF is being |
| requested. Helps in crosschecking that the MAC and PHY |
| are still in sync on what is stored in the cbf_mem_index |
| location. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_SW_PEER_ID_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_SW_PEER_ID_LSB 0 |
| #define TX_CBF_INFO_SW_PEER_ID_MSB 15 |
| #define TX_CBF_INFO_SW_PEER_ID_MASK 0x000000000000ffff |
| |
| |
| /* Description PRE_CBF_DURATION |
| |
| NPDA_duration_field - SIFS - NDP_pkt_time or BRPOLL_duration_field. |
| The cbf_duration_field = pre_cbf_duration - cbf_pkt_time |
| |
| |
| This will be the pre-NDP duration or pre-LMR duration in |
| case of .11az ranging (field Ranging below is set). |
| */ |
| |
| #define TX_CBF_INFO_PRE_CBF_DURATION_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_PRE_CBF_DURATION_LSB 16 |
| #define TX_CBF_INFO_PRE_CBF_DURATION_MSB 31 |
| #define TX_CBF_INFO_PRE_CBF_DURATION_MASK 0x00000000ffff0000 |
| |
| |
| /* Description BRPOLL_INFO_VALID |
| |
| When set, legacy type brpoll info is valid. TXPCU will have |
| to trigger the PDG for response transmission |
| |
| It will not be clear here what the PHY's response format |
| will be. Could be 11ac or 11ax. MAC is not 'remembering' |
| the format type, but PHY will know. |
| |
| MAC will get to know based on the field Cbf_response_type |
| in the PHYRX_CBF_READ_REQUEST_ACK TLV. |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_BRPOLL_INFO_VALID_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_BRPOLL_INFO_VALID_LSB 32 |
| #define TX_CBF_INFO_BRPOLL_INFO_VALID_MSB 32 |
| #define TX_CBF_INFO_BRPOLL_INFO_VALID_MASK 0x0000000100000000 |
| |
| |
| /* Description TRIGGER_BRPOLL_INFO_VALID |
| |
| When set with Ranging = 0, trigger based brpoll info is |
| valid. |
| When set with Ranging = 1, .11az sounding trigger info is |
| valid for trigger-based ranging (TBR). |
| This also implies that RXPCU has already triggered the PDG |
| for response transmission |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_INFO_VALID_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_INFO_VALID_LSB 33 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_INFO_VALID_MSB 33 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_INFO_VALID_MASK 0x0000000200000000 |
| |
| |
| /* Description NPDA_INFO_11AC_VALID |
| |
| When set, 11ac_NDPA info is valid. |
| TXPCU will have to trigger the PDG for response transmission |
| |
| |
| PHY's response will be be in 11ac format |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_NPDA_INFO_11AC_VALID_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_NPDA_INFO_11AC_VALID_LSB 34 |
| #define TX_CBF_INFO_NPDA_INFO_11AC_VALID_MSB 34 |
| #define TX_CBF_INFO_NPDA_INFO_11AC_VALID_MASK 0x0000000400000000 |
| |
| |
| /* Description NPDA_INFO_11AX_VALID |
| |
| When set, 11ax_NDPA info is valid. |
| TXPCU will have to trigger the PDG for response transmission |
| |
| |
| PHY's response will be be in 11ax format |
| |
| There is a separate Npda_info_11be_valid field near the |
| end of this TLV. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_NPDA_INFO_11AX_VALID_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_NPDA_INFO_11AX_VALID_LSB 35 |
| #define TX_CBF_INFO_NPDA_INFO_11AX_VALID_MSB 35 |
| #define TX_CBF_INFO_NPDA_INFO_11AX_VALID_MASK 0x0000000800000000 |
| |
| |
| /* Description DOT11AX_SU_EXTENDED |
| |
| When set, frame was received in 11ax or 11be extended range |
| format |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_SU_EXTENDED_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_DOT11AX_SU_EXTENDED_LSB 36 |
| #define TX_CBF_INFO_DOT11AX_SU_EXTENDED_MSB 36 |
| #define TX_CBF_INFO_DOT11AX_SU_EXTENDED_MASK 0x0000001000000000 |
| |
| |
| /* Description BANDWIDTH |
| |
| Field only valid when Brpoll_info_valid , Npda_info_11ac_valid |
| or Npda_info_11ax_valid is set. |
| |
| The bandwidth that TXPCU uses to select the final response |
| table entry. That entry will contain all response info |
| for the CBF frame. |
| |
| <enum 0 20_mhz>20 Mhz BW |
| <enum 1 40_mhz>40 Mhz BW |
| <enum 2 80_mhz>80 Mhz BW |
| <enum 3 160_mhz>160 Mhz BW |
| <enum 4 320_mhz>320 Mhz BW |
| <enum 5 240_mhz>240 Mhz BW |
| */ |
| |
| #define TX_CBF_INFO_BANDWIDTH_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_BANDWIDTH_LSB 37 |
| #define TX_CBF_INFO_BANDWIDTH_MSB 39 |
| #define TX_CBF_INFO_BANDWIDTH_MASK 0x000000e000000000 |
| |
| |
| /* Description BRPOLL_INFO |
| |
| Field only valid when Brpoll_info_valid is set. |
| |
| Feedback Segment retransmission feedback field from the |
| BRPOLL frame. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_BRPOLL_INFO_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_BRPOLL_INFO_LSB 40 |
| #define TX_CBF_INFO_BRPOLL_INFO_MSB 47 |
| #define TX_CBF_INFO_BRPOLL_INFO_MASK 0x0000ff0000000000 |
| |
| |
| /* Description CBF_RESPONSE_TABLE_BASE_INDEX |
| |
| Field only valid when Brpoll_info_valid or |
| Npda_info_11ac_valid or Npda_info_11ax_valid is set. |
| |
| When set to 0, use the register based lookup for determining |
| the CBF response rates. |
| |
| When > 0, TXPCU shall use this response table index for |
| the 20 MHz response, and higher BW responses are in the |
| subsequent response table entries |
| |
| This will be the LMR response table base index in case of |
| .11az ranging (field Ranging below is set). |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_CBF_RESPONSE_TABLE_BASE_INDEX_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_CBF_RESPONSE_TABLE_BASE_INDEX_LSB 48 |
| #define TX_CBF_INFO_CBF_RESPONSE_TABLE_BASE_INDEX_MSB 55 |
| #define TX_CBF_INFO_CBF_RESPONSE_TABLE_BASE_INDEX_MASK 0x00ff000000000000 |
| |
| |
| /* Description PEER_INDEX |
| |
| Field only valid when Brpoll_info_valid or |
| Npda_info_11ac_valid or Npda_info_11ax_valid is set. |
| |
| |
| Indicates the CBF peer index to be used by TxPCU to determine |
| the look-up table index for CBF response frames. RxPCU |
| populate this field from the peer_entry. |
| <legal 0-7> |
| */ |
| |
| #define TX_CBF_INFO_PEER_INDEX_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_PEER_INDEX_LSB 56 |
| #define TX_CBF_INFO_PEER_INDEX_MSB 58 |
| #define TX_CBF_INFO_PEER_INDEX_MASK 0x0700000000000000 |
| |
| |
| /* Description PKT_TYPE |
| |
| Received Packet type: |
| <enum 0 dot11a>802.11a PPDU type |
| <enum 1 dot11b>802.11b PPDU type |
| <enum 2 dot11n_mm>802.11n Mixed Mode PPDU type |
| <enum 3 dot11ac>802.11ac PPDU type |
| <enum 4 dot11ax>802.11ax PPDU type |
| <enum 5 dot11ba>802.11ba (WUR) PPDU type |
| <enum 6 dot11be>802.11be PPDU type |
| <enum 7 dot11az>802.11az (ranging) PPDU type |
| <enum 8 dot11n_gf>802.11n Green Field PPDU type (unsupported |
| & aborted) |
| */ |
| |
| #define TX_CBF_INFO_PKT_TYPE_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_PKT_TYPE_LSB 59 |
| #define TX_CBF_INFO_PKT_TYPE_MSB 62 |
| #define TX_CBF_INFO_PKT_TYPE_MASK 0x7800000000000000 |
| |
| |
| /* Description TXOP_DURATION_ALL_ONES |
| |
| When set, either the TXOP_DURATION of the received frame |
| was set to all 1s or there is a BSS color collision. The |
| TXOP_DURATION of the transmit response should be forced |
| to all 1s. |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_TXOP_DURATION_ALL_ONES_OFFSET 0x0000000000000000 |
| #define TX_CBF_INFO_TXOP_DURATION_ALL_ONES_LSB 63 |
| #define TX_CBF_INFO_TXOP_DURATION_ALL_ONES_MSB 63 |
| #define TX_CBF_INFO_TXOP_DURATION_ALL_ONES_MASK 0x8000000000000000 |
| |
| |
| /* Description TRIGGER_BRPOLL_COMMON_INFO_15_0 |
| |
| Field only valid when Trigger_Brpoll_info_valid is set. |
| |
| |
| Trigger based BRPOLL or .11az sounding (TBR) request info... |
| bits [15:0] |
| |
| This is the variable common info field from the trigger |
| related to the BTPOLL. For field definition see IEEE spec |
| |
| |
| Note: final IEEE field might not need all these bits. If |
| so, the extra bits become reserved fields. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_COMMON_INFO_15_0_OFFSET 0x0000000000000008 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_COMMON_INFO_15_0_LSB 0 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_COMMON_INFO_15_0_MSB 15 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_COMMON_INFO_15_0_MASK 0x000000000000ffff |
| |
| |
| /* Description TRIGGER_BRPOLL_COMMON_INFO_31_16 |
| |
| Field only valid when Trigger_Brpoll_info_valid is set. |
| |
| |
| Trigger based BRPOLL or .11az sounding (TBR) request info... |
| bits [31:15] |
| |
| This is the variable common info field from the trigger |
| related to the BTPOLL. For field definition see IEEE spec |
| |
| |
| Note: final IEEE field might not need all these bits. If |
| so, the extra bits become reserved fields. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_COMMON_INFO_31_16_OFFSET 0x0000000000000008 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_COMMON_INFO_31_16_LSB 16 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_COMMON_INFO_31_16_MSB 31 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_COMMON_INFO_31_16_MASK 0x00000000ffff0000 |
| |
| |
| /* Description TRIGGER_BRPOLL_USER_INFO_15_0 |
| |
| Field only valid when Trigger_Brpoll_info_valid is set. |
| |
| |
| BRPOLL or .11az sounding (TBR) trigger Type dependent User |
| information bits [15:0] |
| |
| This is the variable user info field from the trigger related |
| to the BTPOLL. |
| |
| For field definition see IEEE spec |
| |
| Note: final IEEE field might not need all these bits. If |
| so, the extra bits become reserved fields. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_USER_INFO_15_0_OFFSET 0x0000000000000008 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_USER_INFO_15_0_LSB 32 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_USER_INFO_15_0_MSB 47 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_USER_INFO_15_0_MASK 0x0000ffff00000000 |
| |
| |
| /* Description TRIGGER_BRPOLL_USER_INFO_31_16 |
| |
| Field only valid when Trigger_Brpoll_info_valid is set. |
| |
| |
| BRPOLL or .11az sounding (TBR) trigger Type dependent User |
| information bits [31:16] |
| |
| This is the variable user info field from the trigger related |
| to the BTPOLL. |
| |
| For field definition see IEEE spec |
| |
| Note: final IEEE field might not need all these bits. If |
| so, the extra bits become reserved fields. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_USER_INFO_31_16_OFFSET 0x0000000000000008 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_USER_INFO_31_16_LSB 48 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_USER_INFO_31_16_MSB 63 |
| #define TX_CBF_INFO_TRIGGER_BRPOLL_USER_INFO_31_16_MASK 0xffff000000000000 |
| |
| |
| /* Description ADDR1_31_0 |
| |
| CBF address1[31:0] |
| */ |
| |
| #define TX_CBF_INFO_ADDR1_31_0_OFFSET 0x0000000000000010 |
| #define TX_CBF_INFO_ADDR1_31_0_LSB 0 |
| #define TX_CBF_INFO_ADDR1_31_0_MSB 31 |
| #define TX_CBF_INFO_ADDR1_31_0_MASK 0x00000000ffffffff |
| |
| |
| /* Description ADDR1_47_32 |
| |
| CBF address1[47:32] |
| */ |
| |
| #define TX_CBF_INFO_ADDR1_47_32_OFFSET 0x0000000000000010 |
| #define TX_CBF_INFO_ADDR1_47_32_LSB 32 |
| #define TX_CBF_INFO_ADDR1_47_32_MSB 47 |
| #define TX_CBF_INFO_ADDR1_47_32_MASK 0x0000ffff00000000 |
| |
| |
| /* Description ADDR2_15_0 |
| |
| CBF address2[15:0] |
| */ |
| |
| #define TX_CBF_INFO_ADDR2_15_0_OFFSET 0x0000000000000010 |
| #define TX_CBF_INFO_ADDR2_15_0_LSB 48 |
| #define TX_CBF_INFO_ADDR2_15_0_MSB 63 |
| #define TX_CBF_INFO_ADDR2_15_0_MASK 0xffff000000000000 |
| |
| |
| /* Description ADDR2_47_16 |
| |
| CBF address2[47:16] |
| */ |
| |
| #define TX_CBF_INFO_ADDR2_47_16_OFFSET 0x0000000000000018 |
| #define TX_CBF_INFO_ADDR2_47_16_LSB 0 |
| #define TX_CBF_INFO_ADDR2_47_16_MSB 31 |
| #define TX_CBF_INFO_ADDR2_47_16_MASK 0x00000000ffffffff |
| |
| |
| /* Description ADDR3_31_0 |
| |
| CBF address3[31:0] |
| */ |
| |
| #define TX_CBF_INFO_ADDR3_31_0_OFFSET 0x0000000000000018 |
| #define TX_CBF_INFO_ADDR3_31_0_LSB 32 |
| #define TX_CBF_INFO_ADDR3_31_0_MSB 63 |
| #define TX_CBF_INFO_ADDR3_31_0_MASK 0xffffffff00000000 |
| |
| |
| /* Description ADDR3_47_32 |
| |
| CBF address3[47:16] |
| */ |
| |
| #define TX_CBF_INFO_ADDR3_47_32_OFFSET 0x0000000000000020 |
| #define TX_CBF_INFO_ADDR3_47_32_LSB 0 |
| #define TX_CBF_INFO_ADDR3_47_32_MSB 15 |
| #define TX_CBF_INFO_ADDR3_47_32_MASK 0x000000000000ffff |
| |
| |
| /* Description STA_PARTIAL_AID |
| |
| Partial AID field |
| */ |
| |
| #define TX_CBF_INFO_STA_PARTIAL_AID_OFFSET 0x0000000000000020 |
| #define TX_CBF_INFO_STA_PARTIAL_AID_LSB 16 |
| #define TX_CBF_INFO_STA_PARTIAL_AID_MSB 26 |
| #define TX_CBF_INFO_STA_PARTIAL_AID_MASK 0x0000000007ff0000 |
| |
| |
| /* Description RESERVED_8A |
| |
| <legal 0> |
| */ |
| |
| #define TX_CBF_INFO_RESERVED_8A_OFFSET 0x0000000000000020 |
| #define TX_CBF_INFO_RESERVED_8A_LSB 27 |
| #define TX_CBF_INFO_RESERVED_8A_MSB 30 |
| #define TX_CBF_INFO_RESERVED_8A_MASK 0x0000000078000000 |
| |
| |
| /* Description CBF_RESP_PWR_MGMT |
| |
| Power management bit of the response CBF frame or LMR frame |
| in case of .11az ranging (field Ranging below is set). |
| */ |
| |
| #define TX_CBF_INFO_CBF_RESP_PWR_MGMT_OFFSET 0x0000000000000020 |
| #define TX_CBF_INFO_CBF_RESP_PWR_MGMT_LSB 31 |
| #define TX_CBF_INFO_CBF_RESP_PWR_MGMT_MSB 31 |
| #define TX_CBF_INFO_CBF_RESP_PWR_MGMT_MASK 0x0000000080000000 |
| |
| |
| /* Description GROUP_ID |
| |
| Group ID field |
| */ |
| |
| #define TX_CBF_INFO_GROUP_ID_OFFSET 0x0000000000000020 |
| #define TX_CBF_INFO_GROUP_ID_LSB 32 |
| #define TX_CBF_INFO_GROUP_ID_MSB 37 |
| #define TX_CBF_INFO_GROUP_ID_MASK 0x0000003f00000000 |
| |
| |
| /* Description RSSI_COMB |
| |
| The combined RSSI of the legacy STF of RX PPDU of all active |
| chains and bandwidths. |
| */ |
| |
| #define TX_CBF_INFO_RSSI_COMB_OFFSET 0x0000000000000020 |
| #define TX_CBF_INFO_RSSI_COMB_LSB 38 |
| #define TX_CBF_INFO_RSSI_COMB_MSB 45 |
| #define TX_CBF_INFO_RSSI_COMB_MASK 0x00003fc000000000 |
| |
| |
| /* Description RESERVED_9A |
| |
| Bit 14: force_extra_symbol: |
| |
| Set to 1 to force an extra OFDM symbol (or symbols) even |
| if the PPDU encoding process does not result in an extra |
| OFDM symbol (or symbols) |
| |
| Not supported in Hamilton v1 |
| <legal 0-1> |
| */ |
| |
| #define TX_CBF_INFO_RESERVED_9A_OFFSET 0x0000000000000020 |
| #define TX_CBF_INFO_RESERVED_9A_LSB 46 |
| #define TX_CBF_INFO_RESERVED_9A_MSB 47 |
| #define TX_CBF_INFO_RESERVED_9A_MASK 0x0000c00000000000 |
| |
| |
| /* Description VHT_NDPA_STA_INFO |
| |
| Field only valid when Npda_info_11ac_valid is set |
| |
| The complete (RAW) STA INFO field that MAC extracted from |
| the VHT NDPA frame. |
| |
| Put here for backup reasons in case last moment fields got |
| added that PHY needs to be able to interpret |
| |
| This field contains |
| { |
| VHT STA_INFO.NC_INDEX[2:0], |
| VHT STA_INFO.FEEDBACK_TYPE, |
| VHT STA_INFO.AID12[11:0] |
| } |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_VHT_NDPA_STA_INFO_OFFSET 0x0000000000000020 |
| #define TX_CBF_INFO_VHT_NDPA_STA_INFO_LSB 48 |
| #define TX_CBF_INFO_VHT_NDPA_STA_INFO_MSB 63 |
| #define TX_CBF_INFO_VHT_NDPA_STA_INFO_MASK 0xffff000000000000 |
| |
| |
| /* Description HE_EHT_STA_INFO_15_0 |
| |
| Field only valid when Npda_info_11ax_valid or Npda_info_11be_valid |
| is set |
| |
| The first 16 bits of the RAW HE or EHT STA INFO field in |
| the NDPA frame |
| |
| Put here for backup reasons in case last moment fields got |
| added that PHY needs to be able to interpret |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_HE_EHT_STA_INFO_15_0_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_HE_EHT_STA_INFO_15_0_LSB 0 |
| #define TX_CBF_INFO_HE_EHT_STA_INFO_15_0_MSB 15 |
| #define TX_CBF_INFO_HE_EHT_STA_INFO_15_0_MASK 0x000000000000ffff |
| |
| |
| /* Description HE_EHT_STA_INFO_31_16 |
| |
| Field only valid when Npda_info_11ax_valid or Npda_info_11be_valid |
| is set |
| |
| The second 16 bits of the RAW HE or EHT STA INFO field in |
| the NDPA frame |
| |
| Put here for backup reasons in case last moment fields got |
| added that PHY needs to be able to interpret |
| |
| There is an EHT_STA_INFO_39_32 field near the end of this |
| TLV. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_HE_EHT_STA_INFO_31_16_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_HE_EHT_STA_INFO_31_16_LSB 16 |
| #define TX_CBF_INFO_HE_EHT_STA_INFO_31_16_MSB 31 |
| #define TX_CBF_INFO_HE_EHT_STA_INFO_31_16_MASK 0x00000000ffff0000 |
| |
| |
| /* Description DOT11AX_RECEIVED_FORMAT_INDICATION |
| |
| This field is only valid for pkt_type == 11ax |
| |
| Format_Indication from the received frame. |
| |
| <enum 0 HE_SIGA_FORMAT_HE_TRIG> |
| <enum 1 HE_SIGA_FORMAT_SU_OR_EXT_SU> |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_FORMAT_INDICATION_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_FORMAT_INDICATION_LSB 32 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_FORMAT_INDICATION_MSB 32 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_FORMAT_INDICATION_MASK 0x0000000100000000 |
| |
| |
| /* Description DOT11AX_RECEIVED_DL_UL_FLAG |
| |
| This field is only valid for pkt_type == 11ax |
| |
| DL_UL_flag from the received frame |
| |
| Differentiates between DL and UL transmission |
| |
| <enum 0 DL_UL_FLAG_IS_DL_OR_TDLS> |
| <enum 1 DL_UL_FLAG_IS_UL> |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DL_UL_FLAG_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DL_UL_FLAG_LSB 33 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DL_UL_FLAG_MSB 33 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DL_UL_FLAG_MASK 0x0000000200000000 |
| |
| |
| /* Description DOT11AX_RECEIVED_BSS_COLOR_ID |
| |
| This field is only valid for pkt_type == 11ax |
| |
| BSS_color_id from the received frame |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_BSS_COLOR_ID_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_BSS_COLOR_ID_LSB 34 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_BSS_COLOR_ID_MSB 39 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_BSS_COLOR_ID_MASK 0x000000fc00000000 |
| |
| |
| /* Description DOT11AX_RECEIVED_SPATIAL_REUSE |
| |
| This field is only valid for pkt_type == 11ax |
| Spatial reuse from the received frame |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_SPATIAL_REUSE_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_SPATIAL_REUSE_LSB 40 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_SPATIAL_REUSE_MSB 43 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_SPATIAL_REUSE_MASK 0x00000f0000000000 |
| |
| |
| /* Description DOT11AX_RECEIVED_CP_SIZE |
| |
| This field is only valid for pkt_type == 11ax |
| |
| CP size of the received frame |
| |
| <enum 0 0_8_us_sgi > Legacy normal GI. Can also be used |
| for HE |
| <enum 1 0_4_us_sgi > Legacy short GI. Can also be used |
| for HE |
| <enum 2 1_6_us_sgi > HE related GI |
| <enum 3 3_2_us_sgi > HE related GI |
| |
| <legal 0 - 3> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_CP_SIZE_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_CP_SIZE_LSB 44 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_CP_SIZE_MSB 45 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_CP_SIZE_MASK 0x0000300000000000 |
| |
| |
| /* Description DOT11AX_RECEIVED_LTF_SIZE |
| |
| This field is only valid for pkt_type == 11ax |
| |
| LTF size of the received frame |
| |
| <enum 0 ltf_1x > |
| <enum 1 ltf_2x > |
| <enum 2 ltf_4x > |
| <legal 0 - 2> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_LTF_SIZE_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_LTF_SIZE_LSB 46 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_LTF_SIZE_MSB 47 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_LTF_SIZE_MASK 0x0000c00000000000 |
| |
| |
| /* Description DOT11AX_RECEIVED_CODING |
| |
| This field is only valid for pkt_type == 11ax |
| |
| Coding from the received frame |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_CODING_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_CODING_LSB 48 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_CODING_MSB 48 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_CODING_MASK 0x0001000000000000 |
| |
| |
| /* Description DOT11AX_RECEIVED_DCM |
| |
| This field is only valid for pkt_type == 11ax |
| |
| DCM from the received frame |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DCM_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DCM_LSB 49 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DCM_MSB 49 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DCM_MASK 0x0002000000000000 |
| |
| |
| /* Description DOT11AX_RECEIVED_DOPPLER_INDICATION |
| |
| This field is only valid for pkt_type == 11ax |
| |
| Doppler_indication from the received frame |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DOPPLER_INDICATION_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DOPPLER_INDICATION_LSB 50 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DOPPLER_INDICATION_MSB 50 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_DOPPLER_INDICATION_MASK 0x0004000000000000 |
| |
| |
| /* Description DOT11AX_RECEIVED_EXT_RU_SIZE |
| |
| This field is only valid for pkt_type == 11ax OR pkt_type |
| == 11be AND dot11ax_su_extended is set |
| The number of (basic) RUs in this extended range reception |
| |
| |
| RXPCU gets this from the received HE_SIG_A |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_EXT_RU_SIZE_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_EXT_RU_SIZE_LSB 51 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_EXT_RU_SIZE_MSB 54 |
| #define TX_CBF_INFO_DOT11AX_RECEIVED_EXT_RU_SIZE_MASK 0x0078000000000000 |
| |
| |
| /* Description DOT11AX_DL_UL_FLAG |
| |
| This field is only valid for pkt_type == 11ax |
| |
| DL_UL_flag to be used for response frame sent to this device. |
| |
| |
| Differentiates between DL and UL transmission |
| |
| <enum 0 DL_UL_FLAG_IS_DL_OR_TDLS> |
| <enum 1 DL_UL_FLAG_IS_UL> |
| |
| Note: this setting can also come from response look-up table |
| in TXPCU... |
| The selection is SW programmable |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11AX_DL_UL_FLAG_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_DOT11AX_DL_UL_FLAG_LSB 55 |
| #define TX_CBF_INFO_DOT11AX_DL_UL_FLAG_MSB 55 |
| #define TX_CBF_INFO_DOT11AX_DL_UL_FLAG_MASK 0x0080000000000000 |
| |
| |
| /* Description RESERVED_11A |
| |
| <legal 0> |
| */ |
| |
| #define TX_CBF_INFO_RESERVED_11A_OFFSET 0x0000000000000028 |
| #define TX_CBF_INFO_RESERVED_11A_LSB 56 |
| #define TX_CBF_INFO_RESERVED_11A_MSB 63 |
| #define TX_CBF_INFO_RESERVED_11A_MASK 0xff00000000000000 |
| |
| |
| /* Description SW_RESPONSE_FRAME_LENGTH |
| |
| Field only valid when SW_Response_tlv_from_crypto is set |
| |
| |
| This is the size of the frame (in bytes) that SW will generate |
| as the response frame. In those scenarios where TXPCU needs |
| to indicate a frame_length in the PDG_RESPONSE TLV, this |
| will be the value that TXPCU needs to use. |
| |
| Note that this length value includes the FCS. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_SW_RESPONSE_FRAME_LENGTH_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_SW_RESPONSE_FRAME_LENGTH_LSB 0 |
| #define TX_CBF_INFO_SW_RESPONSE_FRAME_LENGTH_MSB 15 |
| #define TX_CBF_INFO_SW_RESPONSE_FRAME_LENGTH_MASK 0x000000000000ffff |
| |
| |
| /* Description SW_RESPONSE_TLV_FROM_CRYPTO |
| |
| Field can only be set by MAC mitigation logic |
| |
| The idea is here that normally TXPCU generates the response |
| frame. |
| But as a backup scenario, in case of a last moment some |
| CBF frame BA format change happens or there is some other |
| issue, the CBF frame could be fully generated in the MAC |
| micro CPU and pushed into TXPCU through the Crypto - TXPCU |
| TLV interface. |
| |
| From TXPCU perspective, all interaction with PDG remains |
| exactly the same, accept that the frame length is now coming |
| from field SW_Response_frame_length and the response frame |
| is pushed into TXPCU over the CRYPTO - TXPCU TLV interface |
| |
| |
| When set, this feature kick in |
| When clear, this feature is not enabled |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_SW_RESPONSE_TLV_FROM_CRYPTO_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_SW_RESPONSE_TLV_FROM_CRYPTO_LSB 16 |
| #define TX_CBF_INFO_SW_RESPONSE_TLV_FROM_CRYPTO_MSB 16 |
| #define TX_CBF_INFO_SW_RESPONSE_TLV_FROM_CRYPTO_MASK 0x0000000000010000 |
| |
| |
| /* Description WAIT_SIFS_CONFIG_VALID |
| |
| When set, TXPCU shall follow the wait_sifs configuration. |
| |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_WAIT_SIFS_CONFIG_VALID_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_WAIT_SIFS_CONFIG_VALID_LSB 17 |
| #define TX_CBF_INFO_WAIT_SIFS_CONFIG_VALID_MSB 17 |
| #define TX_CBF_INFO_WAIT_SIFS_CONFIG_VALID_MASK 0x0000000000020000 |
| |
| |
| /* Description WAIT_SIFS |
| |
| Indicates to the TXPCU how precise the SIFS the response |
| timing shall be... |
| |
| The configuration for this is coming from SW programmable |
| registers in RXPCU, where RXPCU shall allow SW to program |
| different settings for the following scenarios: BRPOLL, |
| NDPA-NDP, 11ax trigger frame based BRPOLL |
| |
| <enum 0 NO_SIFS_TIMING> Transmission shall start with the |
| normal delay in PHY after receiving this notification |
| <enum 1 SIFS_TIMING_DESIRED> Transmission shall be made |
| at the SIFS boundary. If shall never start before SIFS boundary, |
| but if it a little later, it is not ideal and should be |
| flagged, but transmission shall not be aborted. |
| <enum 2 SIFS_TIMING_MANDATED> Transmission shall be made |
| at exactly SIFS boundary. If this notification is received |
| by the PHY after SIFS boundary already passed, the PHY |
| shall abort the transmission |
| <legal 0-2> |
| */ |
| |
| #define TX_CBF_INFO_WAIT_SIFS_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_WAIT_SIFS_LSB 18 |
| #define TX_CBF_INFO_WAIT_SIFS_MSB 19 |
| #define TX_CBF_INFO_WAIT_SIFS_MASK 0x00000000000c0000 |
| |
| |
| /* Description RANGING |
| |
| 0: This TLV is generated for Tx CBF generation. |
| 1: TLV is generated due to an active ranging session (.11az). |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_RANGING_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_RANGING_LSB 20 |
| #define TX_CBF_INFO_RANGING_MSB 20 |
| #define TX_CBF_INFO_RANGING_MASK 0x0000000000100000 |
| |
| |
| /* Description SECURE |
| |
| Field only valid if Ranging is set to 1. |
| 0: Current ranging session is non-secure. |
| 1: Current ranging session is secure. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_SECURE_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_SECURE_LSB 21 |
| #define TX_CBF_INFO_SECURE_MSB 21 |
| #define TX_CBF_INFO_SECURE_MASK 0x0000000000200000 |
| |
| |
| /* Description TB_RANGING_RESPONSE_REQUIRED |
| |
| Field only valid in case of TB Ranging |
| <enum 0 No_TB_Ranging_Resp> |
| <enum 1 CTS2S_Resp_to_TF_poll > DO NOT USE. |
| <enum 2 LMR_Resp_to_TF_report> DO NOT USE. |
| <enum 3 NDP_Resp_to_TF_sound> TXPCU to generate TB ranging |
| NDP in response |
| <legal 0-3> |
| */ |
| |
| #define TX_CBF_INFO_TB_RANGING_RESPONSE_REQUIRED_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_TB_RANGING_RESPONSE_REQUIRED_LSB 22 |
| #define TX_CBF_INFO_TB_RANGING_RESPONSE_REQUIRED_MSB 23 |
| #define TX_CBF_INFO_TB_RANGING_RESPONSE_REQUIRED_MASK 0x0000000000c00000 |
| |
| |
| /* Description RESERVED_12A |
| |
| <legal 0> |
| */ |
| |
| #define TX_CBF_INFO_RESERVED_12A_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_RESERVED_12A_LSB 24 |
| #define TX_CBF_INFO_RESERVED_12A_MSB 25 |
| #define TX_CBF_INFO_RESERVED_12A_MASK 0x0000000003000000 |
| |
| |
| /* Description U_SIG_PUNCTURE_PATTERN_ENCODING |
| |
| This field is only valid if Punctured_response is set |
| |
| The 6-bit value used in U-SIG and/or EHT-SIG Common field |
| for the puncture pattern |
| <legal 0-29> |
| */ |
| |
| #define TX_CBF_INFO_U_SIG_PUNCTURE_PATTERN_ENCODING_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_U_SIG_PUNCTURE_PATTERN_ENCODING_LSB 26 |
| #define TX_CBF_INFO_U_SIG_PUNCTURE_PATTERN_ENCODING_MSB 31 |
| #define TX_CBF_INFO_U_SIG_PUNCTURE_PATTERN_ENCODING_MASK 0x00000000fc000000 |
| |
| |
| /* Description DOT11BE_PUNCTURE_BITMAP |
| |
| This field is only valid if Punctured_response is set |
| |
| The bitmap of 20 MHz sub-bands valid in this EHT reception |
| |
| |
| RXPCU gets this from the received U-SIG and/or EHT-SIG via |
| PHY microcode. |
| |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_DOT11BE_PUNCTURE_BITMAP_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_DOT11BE_PUNCTURE_BITMAP_LSB 32 |
| #define TX_CBF_INFO_DOT11BE_PUNCTURE_BITMAP_MSB 47 |
| #define TX_CBF_INFO_DOT11BE_PUNCTURE_BITMAP_MASK 0x0000ffff00000000 |
| |
| |
| /* Description DOT11BE_RESPONSE |
| |
| Indicates that the peer supports .11be response protocols, |
| e.g. .11be BW indication in scrambler seed, .11be dynamic |
| BW procedure, punctured response, etc. |
| */ |
| |
| #define TX_CBF_INFO_DOT11BE_RESPONSE_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_DOT11BE_RESPONSE_LSB 48 |
| #define TX_CBF_INFO_DOT11BE_RESPONSE_MSB 48 |
| #define TX_CBF_INFO_DOT11BE_RESPONSE_MASK 0x0001000000000000 |
| |
| |
| /* Description PUNCTURED_RESPONSE |
| |
| Field only valid if Dot11be_response is set |
| |
| Indicates that the response shall use preamble puncturing |
| |
| */ |
| |
| #define TX_CBF_INFO_PUNCTURED_RESPONSE_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_PUNCTURED_RESPONSE_LSB 49 |
| #define TX_CBF_INFO_PUNCTURED_RESPONSE_MSB 49 |
| #define TX_CBF_INFO_PUNCTURED_RESPONSE_MASK 0x0002000000000000 |
| |
| |
| /* Description NPDA_INFO_11BE_VALID |
| |
| When set, 11be_NDPA info is valid. |
| TXPCU will have to trigger the PDG for response transmission |
| . |
| |
| PHY's response will be in 11be format. |
| <legal all> |
| */ |
| |
| #define TX_CBF_INFO_NPDA_INFO_11BE_VALID_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_NPDA_INFO_11BE_VALID_LSB 50 |
| #define TX_CBF_INFO_NPDA_INFO_11BE_VALID_MSB 50 |
| #define TX_CBF_INFO_NPDA_INFO_11BE_VALID_MASK 0x0004000000000000 |
| |
| |
| /* Description EHT_DUPLICATE_MODE |
| |
| Field only valid for pkt_type == 11be |
| |
| Indicates EHT duplicate modulation |
| |
| <enum 0 eht_no_duplicate> |
| <enum 1 eht_2x_duplicate> |
| <enum 2 eht_4x_duplicate> |
| |
| <legal 0-2> |
| */ |
| |
| #define TX_CBF_INFO_EHT_DUPLICATE_MODE_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_EHT_DUPLICATE_MODE_LSB 51 |
| #define TX_CBF_INFO_EHT_DUPLICATE_MODE_MSB 52 |
| #define TX_CBF_INFO_EHT_DUPLICATE_MODE_MASK 0x0018000000000000 |
| |
| |
| /* Description RESERVED_13A |
| |
| <legal 0> |
| */ |
| |
| #define TX_CBF_INFO_RESERVED_13A_OFFSET 0x0000000000000030 |
| #define TX_CBF_INFO_RESERVED_13A_LSB 53 |
| #define TX_CBF_INFO_RESERVED_13A_MSB 63 |
| #define TX_CBF_INFO_RESERVED_13A_MASK 0xffe0000000000000 |
| |
| |
| /* Description EHT_STA_INFO_39_32 |
| |
| Field only valid when Npda_info_11be_valid is set |
| |
| The fifth 8 bits of the RAW EHT STA INFO field in the NDPA |
| frame |
| */ |
| |
| #define TX_CBF_INFO_EHT_STA_INFO_39_32_OFFSET 0x0000000000000038 |
| #define TX_CBF_INFO_EHT_STA_INFO_39_32_LSB 0 |
| #define TX_CBF_INFO_EHT_STA_INFO_39_32_MSB 7 |
| #define TX_CBF_INFO_EHT_STA_INFO_39_32_MASK 0x00000000000000ff |
| |
| |
| /* Description RESERVED_14A |
| |
| Can be used for future expansion |
| <legal 0> |
| */ |
| |
| #define TX_CBF_INFO_RESERVED_14A_OFFSET 0x0000000000000038 |
| #define TX_CBF_INFO_RESERVED_14A_LSB 8 |
| #define TX_CBF_INFO_RESERVED_14A_MSB 31 |
| #define TX_CBF_INFO_RESERVED_14A_MASK 0x00000000ffffff00 |
| |
| |
| /* Description TLV64_PADDING |
| |
| Automatic DWORD padding inserted while converting TLV32 |
| to TLV64 for 64 bit ARCH |
| <legal 0> |
| */ |
| |
| #define TX_CBF_INFO_TLV64_PADDING_OFFSET 0x0000000000000038 |
| #define TX_CBF_INFO_TLV64_PADDING_LSB 32 |
| #define TX_CBF_INFO_TLV64_PADDING_MSB 63 |
| #define TX_CBF_INFO_TLV64_PADDING_MASK 0xffffffff00000000 |
| |
| |
| |
| #endif // TX_CBF_INFO |