Gitiles
Code Review Sign In
gerrit-public.fairphone.software / platform / vendor / qcom-opensource / wlan / prima / 4d44f639d8a2b071c8bee489364b38a7aaa9726d / . / CORE / SME / inc / csrApi.h
blob: 3bb42d4b0dd3d75690916f9e978ff6b4946c7d9a [file] [log] [blame]
/*
* Copyright (c) 2011-2019 The Linux Foundation. All rights reserved.
*
* Previously licensed under the ISC license by Qualcomm Atheros, Inc.
*
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/*
* This file was originally distributed by Qualcomm Atheros, Inc.
* under proprietary terms before Copyright ownership was assigned
* to the Linux Foundation.
*/
/** ------------------------------------------------------------------------- *
------------------------------------------------------------------------- *
\file csrApi.h
Exports and types for the Common Scan and Roaming Module interfaces.
========================================================================== */
#ifndef CSRAPI_H__
#define CSRAPI_H__
#include "sirApi.h"
#include "sirMacProtDef.h"
#include "csrLinkList.h"
typedef enum
{
eCSR_AUTH_TYPE_NONE, //never used
// MAC layer authentication types
eCSR_AUTH_TYPE_OPEN_SYSTEM,
eCSR_AUTH_TYPE_SHARED_KEY,
eCSR_AUTH_TYPE_SAE,
eCSR_AUTH_TYPE_AUTOSWITCH,
// Upper layer authentication types
eCSR_AUTH_TYPE_WPA,
eCSR_AUTH_TYPE_WPA_PSK,
eCSR_AUTH_TYPE_WPA_NONE,
eCSR_AUTH_TYPE_RSN,
eCSR_AUTH_TYPE_RSN_PSK,
#if defined WLAN_FEATURE_VOWIFI_11R
eCSR_AUTH_TYPE_FT_RSN,
eCSR_AUTH_TYPE_FT_RSN_PSK,
#endif
#ifdef FEATURE_WLAN_WAPI
eCSR_AUTH_TYPE_WAPI_WAI_CERTIFICATE,
eCSR_AUTH_TYPE_WAPI_WAI_PSK,
#endif /* FEATURE_WLAN_WAPI */
#ifdef FEATURE_WLAN_ESE
eCSR_AUTH_TYPE_CCKM_WPA,
eCSR_AUTH_TYPE_CCKM_RSN,
#endif /* FEATURE_WLAN_ESE */
#ifdef WLAN_FEATURE_11W
eCSR_AUTH_TYPE_RSN_PSK_SHA256,
eCSR_AUTH_TYPE_RSN_8021X_SHA256,
#endif
eCSR_NUM_OF_SUPPORT_AUTH_TYPE,
eCSR_AUTH_TYPE_FAILED = 0xff,
eCSR_AUTH_TYPE_UNKNOWN = eCSR_AUTH_TYPE_FAILED,
}eCsrAuthType;
typedef enum
{
eCSR_ENCRYPT_TYPE_NONE,
eCSR_ENCRYPT_TYPE_WEP40_STATICKEY,
eCSR_ENCRYPT_TYPE_WEP104_STATICKEY,
eCSR_ENCRYPT_TYPE_WEP40,
eCSR_ENCRYPT_TYPE_WEP104,
eCSR_ENCRYPT_TYPE_TKIP,
eCSR_ENCRYPT_TYPE_AES,
#ifdef FEATURE_WLAN_WAPI
eCSR_ENCRYPT_TYPE_WPI, //WAPI
#endif /* FEATURE_WLAN_WAPI */
#ifdef FEATURE_WLAN_ESE
eCSR_ENCRYPT_TYPE_KRK,
#endif /* FEATURE_WLAN_ESE */
#ifdef WLAN_FEATURE_11W
//11w BIP
eCSR_ENCRYPT_TYPE_AES_CMAC,
#endif
eCSR_ENCRYPT_TYPE_ANY,
eCSR_NUM_OF_ENCRYPT_TYPE = eCSR_ENCRYPT_TYPE_ANY,
eCSR_ENCRYPT_TYPE_FAILED = 0xff,
eCSR_ENCRYPT_TYPE_UNKNOWN = eCSR_ENCRYPT_TYPE_FAILED,
}eCsrEncryptionType;
/*---------------------------------------------------------------------------
Enumeration of the various Security types
---------------------------------------------------------------------------*/
typedef enum
{
eCSR_SECURITY_TYPE_WPA,
eCSR_SECURITY_TYPE_RSN,
#ifdef FEATURE_WLAN_WAPI
eCSR_SECURITY_TYPE_WAPI,
#endif /* FEATURE_WLAN_WAPI */
eCSR_SECURITY_TYPE_UNKNOWN,
}eCsrSecurityType;
typedef enum
{
eCSR_DOT11_MODE_TAURUS = 0, //This mean everything because it covers all thing we support
eCSR_DOT11_MODE_abg = 0x0001, //11a/b/g only, no HT, no proprietary
eCSR_DOT11_MODE_11a = 0x0002,
eCSR_DOT11_MODE_11b = 0x0004,
eCSR_DOT11_MODE_11g = 0x0008,
eCSR_DOT11_MODE_11n = 0x0010,
eCSR_DOT11_MODE_POLARIS = 0x0020,
eCSR_DOT11_MODE_TITAN = 0x0040,
eCSR_DOT11_MODE_11g_ONLY = 0x0080,
eCSR_DOT11_MODE_11n_ONLY = 0x0100,
eCSR_DOT11_MODE_TAURUS_ONLY = 0x0200,
eCSR_DOT11_MODE_11b_ONLY = 0x0400,
eCSR_DOT11_MODE_11a_ONLY = 0x0800,
#ifdef WLAN_FEATURE_11AC
eCSR_DOT11_MODE_11ac = 0x1000,
eCSR_DOT11_MODE_11ac_ONLY = 0x2000,
#endif
//This is for WIFI test. It is same as eWNIAPI_MAC_PROTOCOL_ALL except when it starts IBSS in 11B of 2.4GHz
//It is for CSR internal use
eCSR_DOT11_MODE_AUTO = 0x4000,
eCSR_NUM_PHY_MODE = 16, //specify the number of maximum bits for phyMode
}eCsrPhyMode;
typedef tANI_U8 tCsrBssid[WNI_CFG_BSSID_LEN];
typedef enum
{
eCSR_BSS_TYPE_NONE,
eCSR_BSS_TYPE_INFRASTRUCTURE,
eCSR_BSS_TYPE_INFRA_AP, // SoftAP AP
eCSR_BSS_TYPE_IBSS, // an IBSS network we will NOT start
eCSR_BSS_TYPE_START_IBSS, // an IBSS network we will start if no partners detected.
eCSR_BSS_TYPE_WDS_AP, // BT-AMP AP
eCSR_BSS_TYPE_WDS_STA, // BT-AMP station
eCSR_BSS_TYPE_ANY, // any BSS type (IBSS or Infrastructure).
}eCsrRoamBssType;
typedef enum {
eCSR_SCAN_REQUEST_11D_SCAN = 1,
eCSR_SCAN_REQUEST_FULL_SCAN,
eCSR_SCAN_IDLE_MODE_SCAN,
eCSR_SCAN_HO_BG_SCAN, // bg scan request in NRT & RT Handoff sub-states
eCSR_SCAN_HO_PROBE_SCAN, // directed probe on an entry from the candidate list
eCSR_SCAN_HO_NT_BG_SCAN, // bg scan request in NT sub-state
eCSR_SCAN_P2P_DISCOVERY,
eCSR_SCAN_SOFTAP_CHANNEL_RANGE,
eCSR_SCAN_P2P_FIND_PEER,
}eCsrRequestType;
typedef enum {
eCSR_SCAN_RESULT_GET = 0,
eCSR_SCAN_RESULT_FLUSH = 1, //to delete all cached scan results
}eCsrScanResultCmd;
typedef enum
{
eCSR_SCAN_SUCCESS,
eCSR_SCAN_FAILURE,
eCSR_SCAN_ABORT,
eCSR_SCAN_FOUND_PEER,
}eCsrScanStatus;
/* Reason to abort the scan
* The reason can used later to decide whether to update the scan results
* to upper layer or not
*/
typedef enum
{
eCSR_SCAN_ABORT_DEFAULT = 1,
eCSR_SCAN_ABORT_DUE_TO_BAND_CHANGE, //Scan aborted due to band change
}eCsrAbortReason;
typedef enum
{
eCSR_INI_SINGLE_CHANNEL_CENTERED = 0,
eCSR_INI_DOUBLE_CHANNEL_HIGH_PRIMARY,
eCSR_INI_DOUBLE_CHANNEL_LOW_PRIMARY,
#ifdef WLAN_FEATURE_11AC
eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_CENTERED,
eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_CENTERED_40MHZ_CENTERED,
eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_CENTERED,
eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW,
eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW,
eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH,
eCSR_INI_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH,
#endif
eCSR_INI_CHANNEL_BONDING_STATE_MAX
}eIniChanBondState;
#define CSR_SCAN_TIME_DEFAULT 0
#define CSR_VALUE_IGNORED 0xFFFFFFFF
#define CSR_RSN_PMKID_SIZE 16
#define CSR_MAX_PMKID_ALLOWED 32
#define CSR_WEP40_KEY_LEN 5
#define CSR_WEP104_KEY_LEN 13
#define CSR_TKIP_KEY_LEN 32
#define CSR_AES_KEY_LEN 16
#define CSR_MAX_TX_POWER ( WNI_CFG_CURRENT_TX_POWER_LEVEL_STAMAX )
#define CSR_MAX_RSC_LEN 16
#ifdef FEATURE_WLAN_WAPI
#define CSR_WAPI_BKID_SIZE 16
#define CSR_MAX_BKID_ALLOWED 16
#define CSR_WAPI_KEY_LEN 32
#define CSR_MAX_KEY_LEN ( CSR_WAPI_KEY_LEN ) //longest one is for WAPI
#else
#define CSR_MAX_KEY_LEN ( CSR_TKIP_KEY_LEN ) //longest one is for TKIP
#endif /* FEATURE_WLAN_WAPI */
#ifdef FEATURE_WLAN_ESE
#define CSR_KRK_KEY_LEN 16
#endif
typedef struct tagCsrChannelInfo
{
tANI_U8 numOfChannels;
tANI_U8 *ChannelList; //it will be an array of channels
}tCsrChannelInfo, *tpCsrChannelInfo;
typedef struct tagCsrSSIDInfo
{
tSirMacSSid SSID;
tANI_BOOLEAN handoffPermitted;
tANI_BOOLEAN ssidHidden;
}tCsrSSIDInfo;
typedef struct tagCsrSSIDs
{
tANI_U32 numOfSSIDs;
tCsrSSIDInfo *SSIDList; //To be allocated for array of SSIDs
}tCsrSSIDs;
typedef struct tagCsrBSSIDs
{
tANI_U32 numOfBSSIDs;
tCsrBssid *bssid;
}tCsrBSSIDs;
typedef struct tagCsrStaParams
{
tANI_U16 capability;
tANI_U8 extn_capability[SIR_MAC_MAX_EXTN_CAP];
tANI_U8 supported_rates_len;
tANI_U8 supported_rates[SIR_MAC_MAX_SUPP_RATES];
tANI_U8 htcap_present;
tSirHTCap HTCap;
tANI_U8 vhtcap_present;
tSirVHTCap VHTCap;
tANI_U8 uapsd_queues;
tANI_U8 max_sp;
tANI_U8 supported_channels_len;
tANI_U8 supported_channels[SIR_MAC_MAX_SUPP_CHANNELS];
tANI_U8 supported_oper_classes_len;
tANI_U8 supported_oper_classes[SIR_MAC_MAX_SUPP_OPER_CLASSES];
}tCsrStaParams;
typedef struct tagCsrScanRequest
{
tSirScanType scanType;
tCsrBssid bssid;
eCsrRoamBssType BSSType;
tCsrSSIDs SSIDs;
tCsrChannelInfo ChannelInfo;
tANI_U32 minChnTime; //in units of milliseconds
tANI_U32 maxChnTime; //in units of milliseconds
tANI_U32 min_chntime_btc_esco; //in units of milliseconds
tANI_U32 max_chntime_btc_esco; //in units of milliseconds
tANI_U32 restTime; //in units of milliseconds //ignored when not connected
tANI_U32 uIEFieldLen;
tANI_U8 *pIEField;
bool scan_randomize;
bool nl_scan;
eCsrRequestType requestType; //11d scan or full scan
tANI_BOOLEAN p2pSearch;
tANI_BOOLEAN skipDfsChnlInP2pSearch;
}tCsrScanRequest;
typedef struct tagCsrBGScanRequest
{
tSirScanType scanType;
tSirMacSSid SSID;
tCsrChannelInfo ChannelInfo;
tANI_U32 scanInterval; //in units of milliseconds
tANI_U32 minChnTime; //in units of milliseconds
tANI_U32 maxChnTime; //in units of milliseconds
tANI_U32 min_chntime_btc_esco; //in units of milliseconds
tANI_U32 max_chntime_btc_esco; //in units of milliseconds
tANI_U32 restTime; //in units of milliseconds //ignored when not connected
tANI_U32 throughputImpact; //specify whether BG scan cares about impacting throughput //ignored when not connected
tCsrBssid bssid; //how to use it?? Apple
}tCsrBGScanRequest, *tpCsrBGScanRequest;
typedef struct tagCsrScanResultInfo
{
//Carry the IEs for the current BSSDescription. A pointer to tDot11fBeaconIEs. Maybe NULL for start BSS.
void *pvIes;
tAniSSID ssId;
v_TIME_t timer; // timer is variable which is used for hidden SSID's timer value
//This member must be the last in the structure because the end of tSirBssDescription is an
// array with nonknown size at this time
tSirBssDescription BssDescriptor;
}tCsrScanResultInfo;
typedef struct tagCsrEncryptionList
{
tANI_U32 numEntries;
eCsrEncryptionType encryptionType[eCSR_NUM_OF_ENCRYPT_TYPE];
}tCsrEncryptionList, *tpCsrEncryptionList;
typedef struct tagCsrAuthList
{
tANI_U32 numEntries;
eCsrAuthType authType[eCSR_NUM_OF_SUPPORT_AUTH_TYPE];
}tCsrAuthList, *tpCsrAuthList;
#ifdef WLAN_FEATURE_VOWIFI_11R
typedef struct tagCsrMobilityDomainInfo
{
tANI_U8 mdiePresent;
tANI_U16 mobilityDomain;
} tCsrMobilityDomainInfo;
#endif
#ifdef FEATURE_WLAN_ESE
typedef struct tagCsrEseCckmInfo
{
tANI_U32 reassoc_req_num;
tANI_BOOLEAN krk_plumbed;
tANI_U8 krk[CSR_KRK_KEY_LEN];
} tCsrEseCckmInfo;
#endif
#if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD)
#define CSR_DOT11F_IE_RSN_MAX_LEN (114) /*TODO: duplicate one in dot11f.h */
typedef struct tagCsrEseCckmIe
{
tANI_U8 cckmIe[CSR_DOT11F_IE_RSN_MAX_LEN];
tANI_U8 cckmIeLen;
} tCsrEseCckmIe;
#endif /* FEATURE_WLAN_ESE && FEATURE_WLAN_ESE_UPLOAD */
typedef struct tagCsrScanResultFilter
{
tCsrBSSIDs BSSIDs; //each bssid has a length of WNI_CFG_BSSID_LEN (6)
tCsrSSIDs SSIDs;
tCsrChannelInfo ChannelInfo;
tCsrAuthList authType;
tCsrEncryptionList EncryptionType;
//eCSR_ENCRYPT_TYPE_ANY cannot be set in multicast encryption type. If caller doesn't case,
//put all supported encryption types in here
tCsrEncryptionList mcEncryptionType;
eCsrRoamBssType BSSType;
//this is a bit mask of all the needed phy mode defined in eCsrPhyMode
tANI_U32 phyMode;
//If countryCode[0] is not 0, countryCode is checked independent of fCheckUnknownCountryCode
tANI_U8 countryCode[WNI_CFG_COUNTRY_CODE_LEN];
tANI_U8 uapsd_mask;
/*For WPS filtering if true => auth and ecryption should be ignored*/
tANI_BOOLEAN bWPSAssociation;
tANI_BOOLEAN bOSENAssociation;
#if defined WLAN_FEATURE_VOWIFI
/*For measurement reports --> if set, only SSID, BSSID and channel is considered for filtering.*/
tANI_BOOLEAN fMeasurement;
#endif
#ifdef WLAN_FEATURE_VOWIFI_11R
tCsrMobilityDomainInfo MDID;
#endif
tANI_BOOLEAN p2pResult;
#ifdef WLAN_FEATURE_11W
// Management Frame Protection
tANI_BOOLEAN MFPEnabled;
tANI_U8 MFPRequired;
tANI_U8 MFPCapable;
#endif
#ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD
tANI_BOOLEAN isPERRoamScan;
#endif
tCsrBssid bssid_hint;
bool ignore_pmf_cap;
}tCsrScanResultFilter;
typedef struct sCsrChnPower_
{
tANI_U8 firstChannel;
tANI_U8 numChannels;
tANI_U8 maxtxPower;
}sCsrChnPower;
typedef struct sCsrChannel_
{
tANI_U8 numChannels;
tANI_U8 channelList[WNI_CFG_VALID_CHANNEL_LIST_LEN];
}sCsrChannel;
typedef struct tagCsr11dinfo
{
sCsrChannel Channels;
tANI_U8 countryCode[WNI_CFG_COUNTRY_CODE_LEN+1];
//max power channel list
sCsrChnPower ChnPower[WNI_CFG_VALID_CHANNEL_LIST_LEN];
}tCsr11dinfo;
typedef enum
{
eCSR_ROAM_CANCELLED = 1,
//this mean error happens before association_start or roaming_start is called.
eCSR_ROAM_FAILED,
//a CSR trigger roaming operation starts, callback may get a pointer to tCsrConnectedProfile
eCSR_ROAM_ROAMING_START,
//a CSR trigger roaming operation is completed
eCSR_ROAM_ROAMING_COMPLETION,
//Connection completed status.
eCSR_ROAM_CONNECT_COMPLETION,
//an association or start_IBSS operation starts,
//callback may get a pointer to tCsrRoamProfile and a pointer to tSirBssDescription
eCSR_ROAM_ASSOCIATION_START,
//a roaming operation is finish, see eCsrRoamResult for
//possible data passed back
eCSR_ROAM_ASSOCIATION_COMPLETION,
eCSR_ROAM_DISASSOCIATED,
eCSR_ROAM_ASSOCIATION_FAILURE,
//when callback with this flag. callback gets a pointer to the BSS desc.
eCSR_ROAM_SHOULD_ROAM,
//A new candidate for PMKID is found
eCSR_ROAM_SCAN_FOUND_NEW_BSS,
//CSR is done lostlink roaming and still cannot reconnect
eCSR_ROAM_LOSTLINK,
//a link lost is detected. CSR starts roaming.
eCSR_ROAM_LOSTLINK_DETECTED,
//TKIP MIC error detected, callback gets a pointer to tpSirSmeMicFailureInd
eCSR_ROAM_MIC_ERROR_IND,
eCSR_ROAM_IBSS_IND, //IBSS indications.
//Update the connection status, useful for IBSS: new peer added, network is active etc.
eCSR_ROAM_CONNECT_STATUS_UPDATE,
eCSR_ROAM_GEN_INFO,
eCSR_ROAM_SET_KEY_COMPLETE,
eCSR_ROAM_REMOVE_KEY_COMPLETE,
eCSR_ROAM_IBSS_LEAVE, //IBSS indications.
//BSS in WDS mode status indication
eCSR_ROAM_WDS_IND,
//BSS in SoftAP mode status indication
eCSR_ROAM_INFRA_IND,
eCSR_ROAM_WPS_PBC_PROBE_REQ_IND,
#ifdef WLAN_FEATURE_VOWIFI_11R
eCSR_ROAM_FT_RESPONSE,
#endif
eCSR_ROAM_FT_START,
eCSR_ROAM_REMAIN_CHAN_READY,
eCSR_ROAM_SEND_ACTION_CNF,
//this mean error happens before association_start or roaming_start is called.
eCSR_ROAM_SESSION_OPENED,
eCSR_ROAM_FT_REASSOC_FAILED,
#ifdef FEATURE_WLAN_LFR
eCSR_ROAM_PMK_NOTIFY,
#endif
#ifdef FEATURE_WLAN_LFR_METRICS
eCSR_ROAM_PREAUTH_INIT_NOTIFY,
eCSR_ROAM_PREAUTH_STATUS_SUCCESS,
eCSR_ROAM_PREAUTH_STATUS_FAILURE,
eCSR_ROAM_HANDOVER_SUCCESS,
#endif
#ifdef FEATURE_WLAN_TDLS
eCSR_ROAM_TDLS_STATUS_UPDATE,
eCSR_ROAM_RESULT_MGMT_TX_COMPLETE_IND,
#endif
eCSR_ROAM_DISCONNECT_ALL_P2P_CLIENTS, //Disaconnect all the clients
eCSR_ROAM_SEND_P2P_STOP_BSS, //Stopbss triggered from SME due to different
// beacon interval
#ifdef WLAN_FEATURE_11W
eCSR_ROAM_UNPROT_MGMT_FRAME_IND,
#endif
#ifdef WLAN_FEATURE_RMC
eCSR_ROAM_IBSS_PEER_INFO_COMPLETE,
#endif
#ifdef WLAN_FEATURE_AP_HT40_24G
eCSR_ROAM_2040_COEX_INFO_IND,
#endif
#if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD)
eCSR_ROAM_TSM_IE_IND,
eCSR_ROAM_CCKM_PREAUTH_NOTIFY,
eCSR_ROAM_ESE_ADJ_AP_REPORT_IND,
eCSR_ROAM_ESE_BCN_REPORT_IND,
#endif /* FEATURE_WLAN_ESE && FEATURE_WLAN_ESE_UPLOAD */
eCSR_ROAM_UPDATE_MAX_RATE_IND,
eCSR_ROAM_LOST_LINK_PARAMS_IND,
eCSR_ROAM_UPDATE_SCAN_RESULT,
eCSR_ROAM_ECSA_BCN_TX_IND,
eCSR_ROAM_ECSA_CHAN_CHANGE_RSP,
eCSR_ROAM_STA_CHANNEL_SWITCH,
}eRoamCmdStatus;
//comment inside indicates what roaming callback gets
typedef enum
{
eCSR_ROAM_RESULT_NONE,
//this means no more action in CSR
//If roamStatus is eCSR_ROAM_ASSOCIATION_COMPLETION, tCsrRoamInfo's pBssDesc may pass back
eCSR_ROAM_RESULT_FAILURE,
//Pass back pointer to tCsrRoamInfo
eCSR_ROAM_RESULT_ASSOCIATED,
eCSR_ROAM_RESULT_NOT_ASSOCIATED,
eCSR_ROAM_RESULT_MIC_FAILURE,
eCSR_ROAM_RESULT_FORCED,
eCSR_ROAM_RESULT_DISASSOC_IND,
eCSR_ROAM_RESULT_DEAUTH_IND,
eCSR_ROAM_RESULT_CAP_CHANGED,
//This means we starts an IBSS
//tCsrRoamInfo's pBssDesc may pass back
eCSR_ROAM_RESULT_IBSS_STARTED,
//START_BSS failed
//tCsrRoamInfo's pBssDesc may pass back
eCSR_ROAM_RESULT_IBSS_START_FAILED,
eCSR_ROAM_RESULT_IBSS_JOIN_SUCCESS,
eCSR_ROAM_RESULT_IBSS_JOIN_FAILED,
eCSR_ROAM_RESULT_IBSS_CONNECT,
eCSR_ROAM_RESULT_IBSS_INACTIVE,
//If roamStatus is eCSR_ROAM_ASSOCIATION_COMPLETION
//tCsrRoamInfo's pBssDesc may pass back. and the peer's MAC address in peerMacOrBssid
//If roamStatus is eCSR_ROAM_IBSS_IND,
//the peer's MAC address in peerMacOrBssid and a beacon frame of the IBSS in pbFrames
eCSR_ROAM_RESULT_IBSS_NEW_PEER,
//Peer departed from IBSS, Callback may get a pointer tSmeIbssPeerInd in pIbssPeerInd
eCSR_ROAM_RESULT_IBSS_PEER_DEPARTED,
//Coalescing in the IBSS network (joined an IBSS network)
//Callback pass a BSSID in peerMacOrBssid
eCSR_ROAM_RESULT_IBSS_COALESCED,
//If roamStatus is eCSR_ROAM_ROAMING_START, callback may get a pointer to tCsrConnectedProfile used to connect.
eCSR_ROAM_RESULT_IBSS_STOP,
eCSR_ROAM_RESULT_LOSTLINK,
eCSR_ROAM_RESULT_MIC_ERROR_UNICAST,
eCSR_ROAM_RESULT_MIC_ERROR_GROUP,
eCSR_ROAM_RESULT_AUTHENTICATED,
eCSR_ROAM_RESULT_NEW_RSN_BSS,
#ifdef FEATURE_WLAN_WAPI
eCSR_ROAM_RESULT_NEW_WAPI_BSS,
#endif /* FEATURE_WLAN_WAPI */
// WDS started successfully
eCSR_ROAM_RESULT_WDS_STARTED,
// WDS start failed
eCSR_ROAM_RESULT_WDS_START_FAILED,
// WDS stopped
eCSR_ROAM_RESULT_WDS_STOPPED,
// WDS joined successfully in STA mode
eCSR_ROAM_RESULT_WDS_ASSOCIATED,
// A station joined WDS AP
eCSR_ROAM_RESULT_WDS_ASSOCIATION_IND,
// WDS join failed in STA mode
eCSR_ROAM_RESULT_WDS_NOT_ASSOCIATED,
// WDS disassociated
eCSR_ROAM_RESULT_WDS_DISASSOCIATED,
// INFRA started successfully
eCSR_ROAM_RESULT_INFRA_STARTED,
// INFRA start failed
eCSR_ROAM_RESULT_INFRA_START_FAILED,
// INFRA stopped
eCSR_ROAM_RESULT_INFRA_STOPPED,
// A station joining INFRA AP
eCSR_ROAM_RESULT_INFRA_ASSOCIATION_IND,
// A station joined INFRA AP
eCSR_ROAM_RESULT_INFRA_ASSOCIATION_CNF,
// INFRA disassociated
eCSR_ROAM_RESULT_INFRA_DISASSOCIATED,
eCSR_ROAM_RESULT_WPS_PBC_PROBE_REQ_IND,
eCSR_ROAM_RESULT_SEND_ACTION_FAIL,
// peer rejected assoc because max assoc limit reached. callback gets pointer to peer
eCSR_ROAM_RESULT_MAX_ASSOC_EXCEEDED,
//Assoc rejected due to concurrent session running on a different channel
eCSR_ROAM_RESULT_ASSOC_FAIL_CON_CHANNEL,
#ifdef FEATURE_WLAN_TDLS
eCSR_ROAM_RESULT_ADD_TDLS_PEER,
eCSR_ROAM_RESULT_UPDATE_TDLS_PEER,
eCSR_ROAM_RESULT_DELETE_TDLS_PEER,
eCSR_ROAM_RESULT_TEARDOWN_TDLS_PEER_IND,
eCSR_ROAM_RESULT_DELETE_ALL_TDLS_PEER_IND,
eCSR_ROAM_RESULT_LINK_ESTABLISH_REQ_RSP,
eCSR_ROAM_RESULT_CHANNEL_SWITCH_REQ_RSP,
#endif
#ifdef WLAN_FEATURE_RMC
eCSR_ROAM_RESULT_IBSS_PEER_INFO_SUCCESS,
eCSR_ROAM_RESULT_IBSS_PEER_INFO_FAILED,
#endif
/* If Scan for SSID failed to found proper BSS */
eCSR_ROAM_RESULT_SCAN_FOR_SSID_FAILURE,
}eCsrRoamResult;
/*----------------------------------------------------------------------------
List of link quality indications HDD can receive from SME
-----------------------------------------------------------------------------*/
typedef enum
{
eCSR_ROAM_LINK_QUAL_MIN_IND = -1,
eCSR_ROAM_LINK_QUAL_POOR_IND = 0, /* bad link */
eCSR_ROAM_LINK_QUAL_GOOD_IND = 1, /* acceptable for voice */
eCSR_ROAM_LINK_QUAL_VERY_GOOD_IND = 2, /* suitable for voice */
eCSR_ROAM_LINK_QUAL_EXCELLENT_IND = 3, /* suitable for voice */
eCSR_ROAM_LINK_QUAL_MAX_IND /* invalid value */
} eCsrRoamLinkQualityInd;
typedef enum
{
eCSR_DISCONNECT_REASON_UNSPECIFIED = 0,
eCSR_DISCONNECT_REASON_MIC_ERROR,
eCSR_DISCONNECT_REASON_DISASSOC,
eCSR_DISCONNECT_REASON_DEAUTH,
eCSR_DISCONNECT_REASON_HANDOFF,
eCSR_DISCONNECT_REASON_IBSS_JOIN_FAILURE,
eCSR_DISCONNECT_REASON_IBSS_LEAVE,
}eCsrRoamDisconnectReason;
typedef enum
{
// Not associated in Infra or participating in an IBSS / Ad-hoc network.
eCSR_ASSOC_STATE_TYPE_NOT_CONNECTED,
// Associated in an Infrastructure network.
eCSR_ASSOC_STATE_TYPE_INFRA_ASSOCIATED,
// Participating in an IBSS network though disconnected (no partner stations
// in the IBSS).
eCSR_ASSOC_STATE_TYPE_IBSS_DISCONNECTED,
// Participating in an IBSS network with partner stations also present
eCSR_ASSOC_STATE_TYPE_IBSS_CONNECTED,
// Participating in a WDS network in AP or STA mode but not connected yet
eCSR_ASSOC_STATE_TYPE_WDS_DISCONNECTED,
// Participating in a WDS network and connected peer to peer
eCSR_ASSOC_STATE_TYPE_WDS_CONNECTED,
// Participating in a Infra network in AP not yet in connected state
eCSR_ASSOC_STATE_TYPE_INFRA_DISCONNECTED,
// Participating in a Infra network and connected to a peer
eCSR_ASSOC_STATE_TYPE_INFRA_CONNECTED,
}eCsrConnectState;
// This parameter is no longer supported in the Profile. Need to set this in the global properties
// for the adapter.
typedef enum eCSR_MEDIUM_ACCESS
{
eCSR_MEDIUM_ACCESS_AUTO = 0,
eCSR_MEDIUM_ACCESS_DCF,
eCSR_MEDIUM_ACCESS_eDCF,
eCSR_MEDIUM_ACCESS_HCF,
eCSR_MEDIUM_ACCESS_WMM_eDCF_802dot1p,
eCSR_MEDIUM_ACCESS_WMM_eDCF_DSCP,
eCSR_MEDIUM_ACCESS_WMM_eDCF_NoClassify,
eCSR_MEDIUM_ACCESS_11e_eDCF = eCSR_MEDIUM_ACCESS_eDCF,
eCSR_MEDIUM_ACCESS_11e_HCF = eCSR_MEDIUM_ACCESS_HCF,
}eCsrMediaAccessType;
typedef enum
{
eCSR_TX_RATE_AUTO = 0, // use rate adaption to determine Tx rate.
eCSR_TX_RATE_1Mbps = 0x00000001,
eCSR_TX_RATE_2Mbps = 0x00000002,
eCSR_TX_RATE_5_5Mbps = 0x00000004,
eCSR_TX_RATE_6Mbps = 0x00000008,
eCSR_TX_RATE_9Mbps = 0x00000010,
eCSR_TX_RATE_11Mbps = 0x00000020,
eCSR_TX_RATE_12Mbps = 0x00000040,
eCSR_TX_RATE_18Mbps = 0x00000080,
eCSR_TX_RATE_24Mbps = 0x00000100,
eCSR_TX_RATE_36Mbps = 0x00000200,
eCSR_TX_RATE_42Mbps = 0x00000400,
eCSR_TX_RATE_48Mbps = 0x00000800,
eCSR_TX_RATE_54Mbps = 0x00001000,
eCSR_TX_RATE_72Mbps = 0x00002000,
eCSR_TX_RATE_84Mbps = 0x00004000,
eCSR_TX_RATE_96Mbps = 0x00008000,
eCSR_TX_RATE_108Mbps = 0x00010000,
eCSR_TX_RATE_126Mbps = 0x00020000,
eCSR_TX_RATE_144Mbps = 0x00040000,
eCSR_TX_RATE_168Mbps = 0x00080000,
eCSR_TX_RATE_192Mbps = 0x00100000,
eCSR_TX_RATE_216Mbps = 0x00200000,
eCSR_TX_RATE_240Mbps = 0x00400000,
}eCsrExposedTxRate;
typedef enum
{
eCSR_OPERATING_CHANNEL_ALL = 0,
eCSR_OPERATING_CHANNEL_AUTO = eCSR_OPERATING_CHANNEL_ALL,
eCSR_OPERATING_CHANNEL_ANY = eCSR_OPERATING_CHANNEL_ALL,
}eOperationChannel;
typedef enum
{
eCSR_DOT11_FRAG_THRESH_AUTO = -1,
eCSR_DOT11_FRAG_THRESH_MIN = 256,
eCSR_DOT11_FRAG_THRESH_MAX = 2346,
eCSR_DOT11_FRAG_THRESH_DEFAULT = 2000
}eCsrDot11FragThresh;
//for channel bonding for ibss
typedef enum
{
eCSR_CB_OFF = 0,
eCSR_CB_AUTO = 1,
eCSR_CB_DOWN = 2,
eCSR_CB_UP = 3,
}eCsrCBChoice;
//For channel bonding, the channel number gap is 4, either up or down. For both 11a and 11g mode.
#define CSR_CB_CHANNEL_GAP 4
#define CSR_CB_CENTER_CHANNEL_OFFSET 2
#define CSR_MAX_24GHz_CHANNEL_NUMBER ( SIR_11B_CHANNEL_END )
#define CSR_MIN_5GHz_CHANNEL_NUMBER ( SIR_11A_CHANNEL_BEGIN )
#define CSR_MAX_5GHz_CHANNEL_NUMBER ( SIR_11A_CHANNEL_END )
// WEP keysize (in bits)...
typedef enum
{
eCSR_SECURITY_WEP_KEYSIZE_40 = 40, // 40 bit key + 24bit IV = 64bit WEP
eCSR_SECURITY_WEP_KEYSIZE_104 = 104, // 104bit key + 24bit IV = 128bit WEP
eCSR_SECURITY_WEP_KEYSIZE_MIN = eCSR_SECURITY_WEP_KEYSIZE_40,
eCSR_SECURITY_WEP_KEYSIZE_MAX = eCSR_SECURITY_WEP_KEYSIZE_104,
eCSR_SECURITY_WEP_KEYSIZE_MAX_BYTES = ( eCSR_SECURITY_WEP_KEYSIZE_MAX / 8 ),
}eCsrWEPKeySize;
// Possible values for the WEP static key ID...
typedef enum
{
eCSR_SECURITY_WEP_STATIC_KEY_ID_MIN = 0,
eCSR_SECURITY_WEP_STATIC_KEY_ID_MAX = 3,
eCSR_SECURITY_WEP_STATIC_KEY_ID_DEFAULT = 0,
eCSR_SECURITY_WEP_STATIC_KEY_ID_INVALID = -1,
}eCsrWEPStaticKeyID;
// Two extra key indicies are used for the IGTK (which is used by BIP)
#define CSR_MAX_NUM_KEY (eCSR_SECURITY_WEP_STATIC_KEY_ID_MAX + 2 + 1)
typedef enum
{
eCSR_SECURITY_SET_KEY_ACTION_NO_CHANGE,
eCSR_SECURITY_SET_KEY_ACTION_SET_KEY,
eCSR_SECURITY_SET_KEY_ACTION_DELETE_KEY,
}eCsrSetKeyAction;
typedef enum
{
eCSR_BAND_ALL,
eCSR_BAND_24,
eCSR_BAND_5G,
eCSR_BAND_MAX,
}eCsrBand;
typedef enum
{
// Roaming because HDD requested for reassoc by changing one of the fields in
// tCsrRoamModifyProfileFields. OR
// Roaming because SME requested for reassoc by changing one of the fields in
// tCsrRoamModifyProfileFields.
eCsrRoamReasonStaCapabilityChanged,
// Roaming because SME requested for reassoc to a different AP, as part of
// inter AP handoff.
eCsrRoamReasonBetterAP,
// Roaming because SME requested it as the link is lost - placeholder, will
// clean it up once handoff code gets in
eCsrRoamReasonSmeIssuedForLostLink,
}eCsrRoamReasonCodes;
typedef enum
{
eCsrRoamWmmAuto = 0,
eCsrRoamWmmQbssOnly = 1,
eCsrRoamWmmNoQos = 2,
} eCsrRoamWmmUserModeType;
typedef enum
{
eCSR_REQUESTER_MIN = 0,
eCSR_DIAG,
eCSR_UMA_GAN,
eCSR_HDD
} eCsrStatsRequesterType;
typedef enum
{
INIT = 0,
REINIT,
} driver_load_type;
typedef struct tagPmkidCandidateInfo
{
tCsrBssid BSSID;
tANI_BOOLEAN preAuthSupported;
}tPmkidCandidateInfo;
typedef struct tagPmkidCacheInfo
{
tCsrBssid BSSID;
tANI_U8 PMKID[CSR_RSN_PMKID_SIZE];
}tPmkidCacheInfo;
#ifdef FEATURE_WLAN_WAPI
typedef struct tagBkidCandidateInfo
{
tCsrBssid BSSID;
tANI_BOOLEAN preAuthSupported;
}tBkidCandidateInfo;
typedef struct tagBkidCacheInfo
{
tCsrBssid BSSID;
tANI_U8 BKID[CSR_WAPI_BKID_SIZE];
}tBkidCacheInfo;
#endif /* FEATURE_WLAN_WAPI */
typedef struct tagCsrKeys
{
tANI_U8 KeyLength[ CSR_MAX_NUM_KEY ]; //Also use to indicate whether the key index is set
tANI_U8 KeyMaterial[ CSR_MAX_NUM_KEY ][ CSR_MAX_KEY_LEN ];
tANI_U8 defaultIndex;
}tCsrKeys;
/* Following are fields which are part of tCsrRoamConnectedProfile might need
modification dynamically once STA is up & running and this could trigger
reassoc */
typedef struct tagCsrRoamModifyProfileFields
{
// during connect this specifies ACs U-APSD is to be setup
// for (Bit0:VO; Bit1:VI; Bit2:BK; Bit3:BE all other bits are ignored).
// During assoc response this COULD carry confirmation of what ACs U-APSD
// got setup for. Later if an APP looking for APSD, SME-QoS might need to
// modify this field
tANI_U8 uapsd_mask;
// HDD might ask to modify this field
tANI_U16 listen_interval;
}tCsrRoamModifyProfileFields;
typedef struct tagCsrRoamProfile
{
//For eCSR_BSS_TYPE_WDS_AP. There must be one SSID in SSIDs.
//For eCSR_BSS_TYPE_WDS_STA. There must be two SSIDs. Index 0 is the SSID of the WDS-AP
//that we need to join. Index 1 is the SSID for self BSS.
tCsrSSIDs SSIDs;
tCsrBSSIDs BSSIDs;
tANI_U32 phyMode; //this is a bit mask of all the needed phy mode defined in eCsrPhyMode
eCsrRoamBssType BSSType;
tCsrAuthList AuthType;
eCsrAuthType negotiatedAuthType;
tCsrEncryptionList EncryptionType;
//This field is for output only, not for input
eCsrEncryptionType negotiatedUCEncryptionType;
//eCSR_ENCRYPT_TYPE_ANY cannot be set in multicast encryption type. If caller doesn't case,
//put all supported encryption types in here
tCsrEncryptionList mcEncryptionType;
//This field is for output only, not for input
eCsrEncryptionType negotiatedMCEncryptionType;
#ifdef WLAN_FEATURE_11W
// Management Frame Protection
tANI_BOOLEAN MFPEnabled;
tANI_U8 MFPRequired;
tANI_U8 MFPCapable;
#endif
tCsrKeys Keys;
eCsrCBChoice CBMode; //up, down or auto
tCsrChannelInfo ChannelInfo;
tANI_U8 operationChannel;
tANI_U16 beaconInterval; //If this is 0, SME will fill in for caller.
// during connect this specifies ACs U-APSD is to be setup
// for (Bit0:VO; Bit1:VI; Bit2:BK; Bit3:BE all other bits are ignored).
// During assoc response this COULD carry confirmation of what ACs U-APSD got setup for
tANI_U8 uapsd_mask;
tANI_U32 nWPAReqIELength; //The byte count in the pWPAReqIE
tANI_U8 *pWPAReqIE; //If not null, it has the IE byte stream for WPA
tANI_U32 nRSNReqIELength; //The byte count in the pRSNReqIE
tANI_U8 *pRSNReqIE; //If not null, it has the IE byte stream for RSN
#ifdef FEATURE_WLAN_WAPI
tANI_U32 nWAPIReqIELength; //The byte count in the pWAPIReqIE
tANI_U8 *pWAPIReqIE; //If not null, it has the IE byte stream for WAPI
#endif /* FEATURE_WLAN_WAPI */
//The byte count in the pAddIE for scan (at the time of join)
tANI_U32 nAddIEScanLength;
/* Additional IE information.
* It has the IE byte stream for additional IE,
* which can be WSC IE and/or P2P IE
*/
tANI_U8 addIEScan[SIR_MAC_MAX_ADD_IE_LENGTH+2]; //Additional IE information.
tANI_U32 nAddIEAssocLength; //The byte count in the pAddIE for assoc
tANI_U8 *pAddIEAssoc; //If not null, it has the IE byte stream for additional IE, which can be WSC IE and/or P2P IE
tANI_U8 countryCode[WNI_CFG_COUNTRY_CODE_LEN]; //it is ignored if [0] is 0.
/*WPS Association if true => auth and ecryption should be ignored*/
tANI_BOOLEAN bWPSAssociation;
tANI_BOOLEAN bOSENAssociation;
tANI_U32 nWSCReqIELength; //The byte count in the pWSCReqIE
tANI_U8 *pWSCReqIE; //If not null, it has the IE byte stream for WSC
tANI_U8 ieee80211d;
tANI_U8 privacy;
tANI_BOOLEAN fwdWPSPBCProbeReq;
tAniAuthType csr80211AuthType;
tANI_U32 dtimPeriod;
tANI_BOOLEAN ApUapsdEnable;
tANI_BOOLEAN protEnabled;
tANI_BOOLEAN obssProtEnabled;
tANI_U16 cfg_protection;
tANI_U8 wps_state;
#ifdef WLAN_FEATURE_VOWIFI_11R
tCsrMobilityDomainInfo MDID;
#endif
tVOS_CON_MODE csrPersona;
bool force_24ghz_in_ht20;
tCsrBssid bssid_hint;
bool force_rsne_override;
}tCsrRoamProfile;
typedef struct tagCsrRoamConnectedProfile
{
tSirMacSSid SSID;
tANI_BOOLEAN handoffPermitted;
tANI_BOOLEAN ssidHidden;
tCsrBssid bssid;
eCsrRoamBssType BSSType;
eCsrAuthType AuthType;
tCsrAuthList AuthInfo;
eCsrEncryptionType EncryptionType;
tCsrEncryptionList EncryptionInfo;
eCsrEncryptionType mcEncryptionType;
tCsrEncryptionList mcEncryptionInfo;
eCsrCBChoice CBMode; //up, down or auto
tANI_U8 operationChannel;
tANI_U16 beaconInterval;
tCsrKeys Keys;
// meaningless on connect. It's an OUT param from CSR's point of view
// During assoc response carries the ACM bit-mask i.e. what
// ACs have ACM=1 (if any),
// (Bit0:VO; Bit1:VI; Bit2:BK; Bit3:BE all other bits are ignored)
tANI_U8 acm_mask;
tCsrRoamModifyProfileFields modifyProfileFields;
tANI_U32 nAddIEAssocLength; //The byte count in the pAddIE for assoc
tANI_U8 *pAddIEAssoc; //If not null, it has the IE byte stream for additional IE, which can be WSC IE and/or P2P IE
tSirBssDescription *pBssDesc;
tANI_BOOLEAN qap; //AP supports QoS
tANI_BOOLEAN qosConnection; //A connection is QoS enabled
#ifdef WLAN_FEATURE_VOWIFI_11R
tCsrMobilityDomainInfo MDID;
#endif
#ifdef FEATURE_WLAN_ESE
tCsrEseCckmInfo eseCckmInfo;
tANI_BOOLEAN isESEAssoc;
#endif
tANI_U32 dot11Mode;
#ifdef WLAN_FEATURE_11W
/* Management Frame Protection */
tANI_BOOLEAN MFPEnabled;
tANI_U8 MFPRequired;
tANI_U8 MFPCapable;
#endif
}tCsrRoamConnectedProfile;
#ifdef WLAN_FEATURE_VOWIFI_11R
typedef struct tagCsr11rConfigParams
{
tANI_BOOLEAN IsFTResourceReqSupported;
} tCsr11rConfigParams;
#endif
#ifdef WLAN_FEATURE_NEIGHBOR_ROAMING
typedef struct tagCsrNeighborRoamConfigParams
{
tANI_U32 nNeighborScanTimerPeriod;
tANI_U8 nNeighborLookupRssiThreshold;
tANI_U8 nNeighborReassocRssiThreshold;
tANI_U16 nNeighborScanMinChanTime;
tANI_U16 nNeighborScanMaxChanTime;
sCsrChannel neighborScanChanList;
tANI_U8 nMaxNeighborRetries;
tANI_U16 nNeighborResultsRefreshPeriod;
tANI_U16 nEmptyScanRefreshPeriod;
tANI_U8 nNeighborInitialForcedRoamTo5GhEnable;
tANI_U8 nWeakZoneRssiThresholdForRoam;
}tCsrNeighborRoamConfigParams;
#endif
typedef struct tagCsrConfigParam
{
tANI_U32 FragmentationThreshold;
tANI_U32 channelBondingMode24GHz; // keep this tANI_U32. This gets converted to ePhyChannelBondState
tANI_U32 channelBondingMode5GHz; // in csrChangeDefaultConfigParam using convertCBIniValueToPhyCBState
eCsrPhyMode phyMode;
eCsrBand eBand;
tANI_U32 RTSThreshold;
tANI_U32 HeartbeatThresh50;
tANI_U32 HeartbeatThresh24;
eCsrCBChoice cbChoice;
eCsrBand bandCapability; //indicate hw capability
tANI_U32 bgScanInterval;
tANI_U16 TxRate;
eCsrRoamWmmUserModeType WMMSupportMode;
tANI_BOOLEAN Is11eSupportEnabled;
tANI_BOOLEAN Is11dSupportEnabled;
tANI_BOOLEAN Is11dSupportEnabledOriginal;
tANI_BOOLEAN Is11hSupportEnabled;
tANI_BOOLEAN shortSlotTime;
tANI_BOOLEAN ProprietaryRatesEnabled;
tANI_U8 AdHocChannel24;
tANI_U8 AdHocChannel5G;
tANI_U32 impsSleepTime; //in units of seconds
tANI_U32 nScanResultAgeCount; //this number minus one is the number of times a scan doesn't find it before it is removed
tANI_U32 scanAgeTimeNCNPS; //scan result aging time threshold when Not-Connect-No-Power-Save, in seconds
tANI_U32 scanAgeTimeNCPS; //scan result aging time threshold when Not-Connect-Power-Save, in seconds
tANI_U32 scanAgeTimeCNPS; //scan result aging time threshold when Connect-No-Power-Save, in seconds,
tANI_U32 scanAgeTimeCPS; //scan result aging time threshold when Connect-Power-Savein seconds
tANI_U32 nRoamingTime; //In seconds, CSR will try this long before gives up. 0 means no roaming
tANI_U8 bCatRssiOffset; //to set the RSSI difference for each category
tANI_U8 fEnableMCCMode; //to set MCC Enable/Disable mode
tANI_U8 fAllowMCCGODiffBI; //to allow MCC GO different B.I than STA's. NOTE: make sure if RIVA firmware can handle this combination before enabling this
//at the moment, this flag is provided only to pass Wi-Fi Cert. 5.1.12
tCsr11dinfo Csr11dinfo;
//Whether to limit the channels to the ones set in Csr11dInfo. If true, the opertaional
//channels are limited to the default channel list. It is an "AND" operation between the
//default channels and the channels in the 802.11d IE.
tANI_BOOLEAN fEnforce11dChannels;
//Country Code Priority
//0 = 802.11D > Country IOCTL > NV
//1 = Country IOCTL > 802.11D > NV
tANI_BOOLEAN fSupplicantCountryCodeHasPriority;
//When true, AP with unknown country code won't be see.
//"Unknown country code" means either Ap doesn't have 11d IE or we cannot
//find a domain for the country code in its 11d IE.
tANI_BOOLEAN fEnforceCountryCodeMatch;
//When true, only APs in the default domain can be seen. If the Ap has "unknown country
//code", or the domain of the country code doesn't match the default domain, the Ap is
//not acceptable.
tANI_BOOLEAN fEnforceDefaultDomain;
tANI_U16 vccRssiThreshold;
tANI_U32 vccUlMacLossThreshold;
tANI_U32 nPassiveMinChnTime; //in units of milliseconds
tANI_U32 nPassiveMaxChnTime; //in units of milliseconds
tANI_U32 nActiveMinChnTime; //in units of milliseconds
tANI_U32 nActiveMaxChnTime; //in units of milliseconds
tANI_U32 nInitialDwellTime; //in units of milliseconds
uint32_t min_chntime_btc_esco; //in units of milliseconds
uint32_t max_chntime_btc_esco; //in units of milliseconds
uint32_t min_chntime_btc_sco;
uint32_t max_chntime_btc_sco;
tANI_U32 disableAggWithBtc;
#ifdef WLAN_AP_STA_CONCURRENCY
tANI_U32 nPassiveMinChnTimeConc; //in units of milliseconds
tANI_U32 nPassiveMaxChnTimeConc; //in units of milliseconds
tANI_U32 nActiveMinChnTimeConc; //in units of milliseconds
tANI_U32 nActiveMaxChnTimeConc; //in units of milliseconds
tANI_U32 nRestTimeConc; //in units of milliseconds
tANI_U8 nNumStaChanCombinedConc; //number of channels combined for
//STA in each split scan operation
tANI_U8 nNumP2PChanCombinedConc; //number of channels combined for
//P2P in each split scan operation
#endif
tANI_BOOLEAN IsIdleScanEnabled;
//in dBm, the maximum TX power
//The actual TX power is the lesser of this value and 11d.
//If 11d is disable, the lesser of this and default setting.
tANI_U8 nTxPowerCap;
tANI_U32 statsReqPeriodicity; //stats request frequency from PE while in full power
tANI_U32 statsReqPeriodicityInPS;//stats request frequency from PE while in power save
#ifdef WLAN_FEATURE_VOWIFI_11R
tCsr11rConfigParams csr11rConfig;
#endif
#ifdef FEATURE_WLAN_ESE
tANI_U8 isEseIniFeatureEnabled;
#endif
#ifdef FEATURE_WLAN_LFR
tANI_U8 isFastRoamIniFeatureEnabled;
tANI_U8 MAWCEnabled;
#endif
#if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR)
tANI_U8 isFastTransitionEnabled;
tANI_U8 RoamRssiDiff;
tANI_U8 nImmediateRoamRssiDiff;
tANI_BOOLEAN isWESModeEnabled;
#endif
#ifdef WLAN_FEATURE_NEIGHBOR_ROAMING
tCsrNeighborRoamConfigParams neighborRoamConfig;
#endif
/* Instead of Reassoc, send ADDTS/DELTS even when ACM is off for that AC
* This is mandated by WMM-AC certification */
tANI_BOOLEAN addTSWhenACMIsOff;
/*channelPowerInfoList24 has been seen corrupted. Set this flag to true trying to
* detect when it happens. Adding this into code because we can't reproduce it easily.
* We don't know when it happens. */
tANI_BOOLEAN fValidateList;
/*Customer wants to start with an active scan based on the default country code.
* This optimization will minimize the driver load to association time.
* Based on this flag we will bypass the initial passive scan needed for 11d
* to determine the country code & domain */
tANI_BOOLEAN fEnableBypass11d;
/*Customer wants to optimize the scan time. Avoiding scans(passive) on DFS
* channels while swipping through both bands can save some time
* (apprx 1.3 sec) */
tANI_U8 fEnableDFSChnlScan;
//To enable/disable scanning 2.4Ghz channels twice on a single scan request from HDD
tANI_BOOLEAN fScanTwice;
#ifdef WLAN_FEATURE_11AC
tANI_U32 nVhtChannelWidth;
tANI_U8 enableTxBF;
tANI_U8 txBFCsnValue;
tANI_BOOLEAN enableVhtFor24GHz;
tANI_U8 enableMuBformee;
#endif
/*
* To enable/disable scanning only 2.4Ghz channels on first scan
*/
tANI_BOOLEAN fFirstScanOnly2GChnl;
#if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR)
tANI_BOOLEAN nRoamPrefer5GHz;
tANI_BOOLEAN nRoamIntraBand;
tANI_U8 nProbes;
tANI_U16 nRoamScanHomeAwayTime;
#ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD
tANI_BOOLEAN isRoamOffloadScanEnabled;
tANI_BOOLEAN bFastRoamInConIniFeatureEnabled;
v_BOOL_t isPERRoamEnabled;
v_BOOL_t isPERRoamCCAEnabled;
v_S15_t PERRoamFullScanThreshold;
v_S15_t PERMinRssiThresholdForRoam;
v_U32_t rateUpThreshold;
v_U32_t rateDownThreshold;
v_U32_t waitPeriodForNextPERScan;
v_U32_t PERtimerThreshold;
v_U32_t PERroamTriggerPercent;
#endif
#ifdef WLAN_FEATURE_LFR_MBB
tANI_BOOLEAN enable_lfr_mbb;
#endif
#endif
tANI_BOOLEAN ignorePeerErpInfo;
tANI_U8 scanCfgAgingTime;
tANI_U8 enableTxLdpc;
tANI_U8 isAmsduSupportInAMPDU;
tANI_U8 nSelect5GHzMargin;
tANI_U8 isCoalesingInIBSSAllowed;
tANI_U8 allowDFSChannelRoam;
tANI_BOOLEAN initialScanSkipDFSCh;
tANI_BOOLEAN sendDeauthBeforeCon;
eCsrBand scanBandPreference;
#ifdef WLAN_FEATURE_AP_HT40_24G
tANI_BOOLEAN apHT40_24GEnabled;
tANI_U32 channelBondingAPMode24GHz; // Use for SAP/P2P GO 2.4GHz channel Bonding
#endif
tANI_U32 nOBSSScanWidthTriggerInterval;
tANI_U8 roamDelayStatsEnabled;
tANI_BOOLEAN ignorePeerHTopMode;
tANI_BOOLEAN disableP2PMacSpoofing;
tANI_BOOLEAN enableFatalEvent;
tANI_U8 max_chan_for_dwell_time_cfg;
uint32_t enable_edca_params;
uint32_t edca_vo_cwmin;
uint32_t edca_vi_cwmin;
uint32_t edca_bk_cwmin;
uint32_t edca_be_cwmin;
uint32_t edca_vo_cwmax;
uint32_t edca_vi_cwmax;
uint32_t edca_bk_cwmax;
uint32_t edca_be_cwmax;
uint32_t edca_vo_aifs;
uint32_t edca_vi_aifs;
uint32_t edca_bk_aifs;
uint32_t edca_be_aifs;
tANI_BOOLEAN disable_scan_during_sco;
uint32_t sta_auth_retries_for_code17;
uint32_t sta_sap_scc_on_dfs_chan;
tANI_U8 agg_btc_sco_oui[3];
tANI_U8 num_ba_buff_btc_sco;
tANI_U8 num_ba_buff;
bool force_scc_with_ecsa;
}tCsrConfigParam;
//Tush
typedef struct tagCsrUpdateConfigParam
{
tCsr11dinfo Csr11dinfo;
}tCsrUpdateConfigParam;
typedef struct tagCsrRoamInfo
{
tCsrRoamProfile *pProfile; //may be NULL
tSirBssDescription *pBssDesc; //May be NULL
tANI_U32 nBeaconLength; //the length, in bytes, of the beacon frame, can be 0
tANI_U32 nAssocReqLength; //the length, in bytes, of the assoc req frame, can be 0
tANI_U32 nAssocRspLength; //The length, in bytes, of the assoc rsp frame, can be 0
tANI_U32 nFrameLength;
tANI_U8 frameType;
tANI_U8 *pbFrames; //Point to a buffer contain the beacon, assoc req, assoc rsp frame, in that order
//user needs to use nBeaconLength, nAssocReqLength, nAssocRspLength to desice where
//each frame starts and ends.
tANI_BOOLEAN fReassocReq; //set to true if for re-association
tANI_BOOLEAN fReassocRsp; //set to true if for re-association
tCsrBssid bssid;
//Only valid in IBSS
//this is the peers MAC address for eCSR_ROAM_RESULT_IBSS_NEW_PEER or PEER_DEPARTED
tCsrBssid peerMac;
tSirResultCodes statusCode;
tANI_U32 reasonCode; //this could be our own defined or sent from the other BSS(per 802.11 spec)
tANI_U8 staId; // Peer stationId when connected
/*The DPU signatures will be sent eventually to TL to help it determine the
association to which a packet belongs to*/
/*Unicast DPU signature*/
tANI_U8 ucastSig;
/*Broadcast DPU signature*/
tANI_U8 bcastSig;
tANI_BOOLEAN fAuthRequired; //FALSE means auth needed from supplicant. TRUE means authenticated(static WEP, open)
tANI_U8 sessionId;
tANI_U8 rsnIELen;
tANI_U8 *prsnIE;
tANI_U8 addIELen;
tANI_U8 *paddIE;
union
{
tSirMicFailureInfo *pMICFailureInfo;
tCsrRoamConnectedProfile *pConnectedProfile;
tSirWPSPBCProbeReq *pWPSPBCProbeReq;
tSirLostLinkParamsInfo *pLostLinkParams;
} u;
tANI_BOOLEAN wmmEnabledSta; //set to true if WMM enabled STA
#ifdef WLAN_FEATURE_AP_HT40_24G
tANI_BOOLEAN HT40MHzIntoEnabledSta; //set to true if 40 MHz Intolerant enabled STA
#endif
tANI_U32 dtimPeriod;
#ifdef FEATURE_WLAN_ESE
tANI_BOOLEAN isESEAssoc;
#ifdef FEATURE_WLAN_ESE_UPLOAD
tSirTsmIE tsmIe;
tANI_U32 timestamp[2];
tANI_U16 tsmRoamDelay;
tSirEseBcnReportRsp *pEseBcnReportRsp;
#endif /* FEATURE_WLAN_ESE_UPLOAD */
#endif
#ifdef WLAN_FEATURE_VOWIFI_11R
tANI_BOOLEAN is11rAssoc;
#endif
void* pRemainCtx;
tANI_U32 rxChan;
#ifdef FEATURE_WLAN_TDLS
tANI_U8 staType;
#endif
// Required for indicating the frames to upper layer
tANI_U32 beaconLength;
tANI_U8* beaconPtr;
tANI_U32 assocReqLength;
tANI_U8* assocReqPtr;
tANI_S8 rxRssi;
tANI_U32 maxRateFlags;
#ifdef WLAN_FEATURE_AP_HT40_24G
tpSirHT2040CoexInfoInd pSmeHT2040CoexInfoInd;
#endif
tDot11fIEHTCaps ht_caps;
tDot11fIEVHTCaps vht_caps;
tDot11fIEhs20vendor_ie hs20vendor_ie;
tDot11fIEVHTOperation vht_operation;
tDot11fIEHTInfo ht_operation;
bool reassoc;
struct sir_channel_chanege_rsp *ap_chan_change_rsp;
tSirSmeChanInfo chan_info;
tSirMacHTChannelWidth ch_width;
}tCsrRoamInfo;
typedef struct tagCsrFreqScanInfo
{
tANI_U32 nStartFreq; //in unit of MHz
tANI_U32 nEndFreq; //in unit of MHz
tSirScanType scanType;
}tCsrFreqScanInfo;
typedef struct sSirSmeAssocIndToUpperLayerCnf
{
tANI_U16 messageType; // eWNI_SME_ASSOC_CNF
tANI_U16 length;
tANI_U8 sessionId;
tSirResultCodes statusCode;
tSirMacAddr bssId; // Self BSSID
tSirMacAddr peerMacAddr;
tANI_U16 aid;
tSirMacAddr alternateBssId;
tANI_U8 alternateChannelId;
tANI_U8 wmmEnabledSta; //set to true if WMM enabled STA
tSirRSNie rsnIE; // RSN IE received from peer
tSirAddie addIE; // Additional IE received from peer, which can be WSC and/or P2P IE
tANI_U8 reassocReq; //set to true if reassoc
#ifdef WLAN_FEATURE_AP_HT40_24G
tANI_U8 HT40MHzIntoEnabledSta; //set to true if 40 MHz Intolerant enabled STA
#endif
uint32_t rate_flags;
tSirSmeChanInfo chan_info;
tSirMacHTChannelWidth ch_width;
tDot11fIEHTCaps HTCaps;
tDot11fIEVHTCaps VHTCaps;
} tSirSmeAssocIndToUpperLayerCnf, *tpSirSmeAssocIndToUpperLayerCnf;
typedef struct tagCsrSummaryStatsInfo
{
tANI_U32 retry_cnt[4];
tANI_U32 multiple_retry_cnt[4];
tANI_U32 tx_frm_cnt[4];
//tANI_U32 num_rx_frm_crc_err; same as rx_error_cnt
//tANI_U32 num_rx_frm_crc_ok; same as rx_frm_cnt
tANI_U32 rx_frm_cnt;
tANI_U32 frm_dup_cnt;
tANI_U32 fail_cnt[4];
tANI_U32 rts_fail_cnt;
tANI_U32 ack_fail_cnt;
tANI_U32 rts_succ_cnt;
tANI_U32 rx_discard_cnt;
tANI_U32 rx_error_cnt;
tANI_U32 tx_byte_cnt;
}tCsrSummaryStatsInfo;
typedef struct tagCsrGlobalClassAStatsInfo
{
tANI_U32 rx_frag_cnt;
tANI_U32 promiscuous_rx_frag_cnt;
//tANI_U32 rx_fcs_err;
tANI_U32 rx_input_sensitivity;
tANI_U32 max_pwr;
//tANI_U32 default_pwr;
tANI_U32 sync_fail_cnt;
tANI_U32 tx_rate;
//mcs index for HT20 and HT40 rates
tANI_U32 mcs_index;
//to defferentiate between HT20 and HT40 rates;short and long guard interval
tANI_U32 tx_rate_flags;
}tCsrGlobalClassAStatsInfo;
typedef struct tagCsrGlobalClassBStatsInfo
{
tANI_U32 uc_rx_wep_unencrypted_frm_cnt;
tANI_U32 uc_rx_mic_fail_cnt;
tANI_U32 uc_tkip_icv_err;
tANI_U32 uc_aes_ccmp_format_err;
tANI_U32 uc_aes_ccmp_replay_cnt;
tANI_U32 uc_aes_ccmp_decrpt_err;
tANI_U32 uc_wep_undecryptable_cnt;
tANI_U32 uc_wep_icv_err;
tANI_U32 uc_rx_decrypt_succ_cnt;
tANI_U32 uc_rx_decrypt_fail_cnt;
tANI_U32 mcbc_rx_wep_unencrypted_frm_cnt;
tANI_U32 mcbc_rx_mic_fail_cnt;
tANI_U32 mcbc_tkip_icv_err;
tANI_U32 mcbc_aes_ccmp_format_err;
tANI_U32 mcbc_aes_ccmp_replay_cnt;
tANI_U32 mcbc_aes_ccmp_decrpt_err;
tANI_U32 mcbc_wep_undecryptable_cnt;
tANI_U32 mcbc_wep_icv_err;
tANI_U32 mcbc_rx_decrypt_succ_cnt;
tANI_U32 mcbc_rx_decrypt_fail_cnt;
}tCsrGlobalClassBStatsInfo;
typedef struct tagCsrGlobalClassCStatsInfo
{
tANI_U32 rx_amsdu_cnt;
tANI_U32 rx_ampdu_cnt;
tANI_U32 tx_20_frm_cnt;
tANI_U32 rx_20_frm_cnt;
tANI_U32 rx_mpdu_in_ampdu_cnt;
tANI_U32 ampdu_delimiter_crc_err;
}tCsrGlobalClassCStatsInfo;
typedef struct tagCsrGlobalClassDStatsInfo
{
tANI_U32 tx_uc_frm_cnt;
tANI_U32 tx_mc_frm_cnt;
tANI_U32 tx_bc_frm_cnt;
tANI_U32 rx_uc_frm_cnt;
tANI_U32 rx_mc_frm_cnt;
tANI_U32 rx_bc_frm_cnt;
tANI_U32 tx_uc_byte_cnt[4];
tANI_U32 tx_mc_byte_cnt;
tANI_U32 tx_bc_byte_cnt;
tANI_U32 rx_uc_byte_cnt[4];
tANI_U32 rx_mc_byte_cnt;
tANI_U32 rx_bc_byte_cnt;
tANI_U32 rx_byte_cnt;
tANI_U32 num_rx_bytes_crc_ok;
tANI_U32 rx_rate;
}tCsrGlobalClassDStatsInfo;
typedef struct tagCsrPerStaStatsInfo
{
tANI_U32 tx_frag_cnt[4];
tANI_U32 tx_ampdu_cnt;
tANI_U32 tx_mpdu_in_ampdu_cnt;
} tCsrPerStaStatsInfo;
typedef struct tagCsrRoamSetKey
{
eCsrEncryptionType encType;
tAniKeyDirection keyDirection; //Tx, Rx or Tx-and-Rx
tCsrBssid peerMac; //Peers MAC address. ALL 1's for group key
tANI_U8 paeRole; //0 for supplicant
tANI_U8 keyId; // Kye index
tANI_U16 keyLength; //Number of bytes containing the key in pKey
tANI_U8 Key[CSR_MAX_KEY_LEN];
tANI_U8 keyRsc[CSR_MAX_RSC_LEN];
} tCsrRoamSetKey;
typedef struct tagCsrRoamRemoveKey
{
eCsrEncryptionType encType;
tCsrBssid peerMac; //Peers MAC address. ALL 1's for group key
tANI_U8 keyId; //key index
} tCsrRoamRemoveKey;
#ifdef FEATURE_WLAN_TDLS
typedef struct tagCsrLinkEstablishParams
{
tSirMacAddr peerMac;
tANI_U8 uapsdQueues;
tANI_U8 qos;
tANI_U8 maxSp;
tANI_U8 isBufSta;
tANI_U8 isOffChannelSupported;
tANI_U8 isResponder;
tANI_U8 supportedChannelsLen;
tANI_U8 supportedChannels[SIR_MAC_MAX_SUPP_CHANNELS];
tANI_U8 supportedOperClassesLen;
tANI_U8 supportedOperClasses[SIR_MAC_MAX_SUPP_OPER_CLASSES];
}tCsrTdlsLinkEstablishParams;
typedef struct tagCsrTdlsSendMgmt
{
tSirMacAddr peerMac;
tANI_U8 frameType;
tANI_U8 dialog;
tANI_U16 statusCode;
tANI_U8 responder;
tANI_U32 peerCapability;
tANI_U8 *buf;
tANI_U8 len;
}tCsrTdlsSendMgmt;
#endif
typedef void * tScanResultHandle;
#define CSR_INVALID_SCANRESULT_HANDLE (NULL)
#ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD
typedef struct tagCsrHandoffRequest
{
tCsrBssid bssid;
tANI_U8 channel;
/* To check if its a REASSOC or a FASTREASSOC IOCTL */
tANI_U8 src;
}tCsrHandoffRequest;
#endif
typedef enum {
REASSOC = 0,
FASTREASSOC = 1,
CONNECT_CMD_USERSPACE = 2,
} handoff_src;
#if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD)
typedef struct tagCsrEseBeaconReqParams
{
tANI_U16 measurementToken;
tANI_U8 channel;
tANI_U8 scanMode;
tANI_U16 measurementDuration;
} tCsrEseBeaconReqParams, *tpCsrEseBeaconReqParams;
typedef struct tagCsrEseBeaconReq
{
tANI_U8 numBcnReqIe;
tCsrEseBeaconReqParams bcnReq[SIR_ESE_MAX_MEAS_IE_REQS];
} tCsrEseBeaconReq, *tpCsrEseBeaconReq;
#endif /* FEATURE_WLAN_ESE && FEATURE_WLAN_ESE_UPLOAD */
struct tagCsrDelStaParams
{
tCsrBssid peerMacAddr;
u16 reason_code;
u8 subtype;
};
/**
* struct csr_set_tx_max_pwr_per_band - Req params to
* set max tx power per band
* @band: band for which power to be set
* @power: power to set in dB
*/
struct csr_set_tx_max_pwr_per_band {
eCsrBand band;
tPowerdBm power;
};
////////////////////////////////////////////Common SCAN starts
//void *p2 -- the second context pass in for the caller
//***what if callback is called before requester gets the scanId??
typedef eHalStatus (*csrScanCompleteCallback)(tHalHandle, void *p2, tANI_U32 scanID, eCsrScanStatus status);
///////////////////////////////////////////Common Roam starts
//pContext is the pContext passed in with the roam request
//pParam is a pointer to a tCsrRoamInfo, see definition of eRoamCmdStatus and
// eRoamCmdResult for detail valid members. It may be NULL
//roamId is to identify the callback related roam request. 0 means unsolicit
//roamStatus is a flag indicating the status of the callback
//roamResult is the result
typedef eHalStatus (*csrRoamCompleteCallback)(void *pContext, tCsrRoamInfo *pParam, tANI_U32 roamId,
eRoamCmdStatus roamStatus, eCsrRoamResult roamResult);
typedef eHalStatus (*csrRoamSessionCloseCallback)(void *pContext);
/* ---------------------------------------------------------------------------
\fn csrRoamGetNumPMKIDCache
\brief return number of PMKID cache entries
\return tANI_U32 - the number of PMKID cache entries
-------------------------------------------------------------------------------*/
//tANI_U32 csrRoamGetNumPMKIDCache(tHalHandle hHal);
/* ---------------------------------------------------------------------------
\fn csrRoamGetPMKIDCache
\brief return PMKID cache from CSR
\param pNum - caller allocated memory that has the space of the number of pBuf tPmkidCacheInfo as input. Upon returned, *pNum has the
needed or actually number in tPmkidCacheInfo.
\param pPmkidCache - Caller allocated memory that contains PMKID cache, if any, upon return
\return eHalStatus - when fail, it usually means the buffer allocated is not big enough
-------------------------------------------------------------------------------*/
//eHalStatus csrRoamGetPMKIDCache(tHalHandle hHal, tANI_U32 *pNum, tPmkidCacheInfo *pPmkidCache);
//pProfile - pointer to tCsrRoamProfile
#define CSR_IS_START_IBSS(pProfile) (eCSR_BSS_TYPE_START_IBSS == (pProfile)->BSSType)
#define CSR_IS_JOIN_TO_IBSS(pProfile) (eCSR_BSS_TYPE_IBSS == (pProfile)->BSSType)
#define CSR_IS_IBSS(pProfile) ( CSR_IS_START_IBSS(pProfile) || CSR_IS_JOIN_TO_IBSS(pProfile) )
#define CSR_IS_INFRASTRUCTURE(pProfile) (eCSR_BSS_TYPE_INFRASTRUCTURE == (pProfile)->BSSType)
#define CSR_IS_ANY_BSS_TYPE(pProfile) (eCSR_BSS_TYPE_ANY == (pProfile)->BSSType)
#define CSR_IS_WDS_AP( pProfile ) ( eCSR_BSS_TYPE_WDS_AP == (pProfile)->BSSType )
#define CSR_IS_WDS_STA( pProfile ) ( eCSR_BSS_TYPE_WDS_STA == (pProfile)->BSSType )
#define CSR_IS_WDS( pProfile ) ( CSR_IS_WDS_AP( pProfile ) || CSR_IS_WDS_STA( pProfile ) )
#define CSR_IS_INFRA_AP( pProfile ) ( eCSR_BSS_TYPE_INFRA_AP == (pProfile)->BSSType )
//pProfile - pointer to tCsrRoamConnectedProfile
#define CSR_IS_CONN_INFRA_AP( pProfile ) ( eCSR_BSS_TYPE_INFRA_AP == (pProfile)->BSSType )
#define CSR_IS_CONN_WDS_AP( pProfile ) ( eCSR_BSS_TYPE_WDS_AP == (pProfile)->BSSType )
#define CSR_IS_CONN_WDS_STA( pProfile ) ( eCSR_BSS_TYPE_WDS_STA == (pProfile)->BSSType )
#define CSR_IS_CONN_WDS( pProfile ) ( CSR_IS_WDS_AP( pProfile ) || CSR_IS_WDS_STA( pProfile ) )
///////////////////////////////////////////Common Roam ends
/* ---------------------------------------------------------------------------
\fn csrSetChannels
\brief HDD calls this function to change some global settings.
caller must set the all fields or call csrGetConfigParam to prefill the fields.
\param pParam - caller allocated memory
\return eHalStatus
-------------------------------------------------------------------------------*/
eHalStatus csrSetChannels(tHalHandle hHal, tCsrConfigParam *pParam );
eHalStatus csrSetRegInfo(tHalHandle hHal, tANI_U8 *apCntryCode);
//enum to string conversion for debug output
const char * get_eRoamCmdStatus_str(eRoamCmdStatus val);
const char * get_eCsrRoamResult_str(eCsrRoamResult val);
/* ---------------------------------------------------------------------------
\fn csrSetPhyMode
\brief HDD calls this function to set the phyMode.
This function must be called after CFG is downloaded and all the band/mode setting already passed into
CSR.
\param phyMode - indicate the phyMode needs to set to. The value has to be either 0, or some bits set.
See eCsrPhyMode for definition
\param eBand - specify the operational band (2.4, 5 or both)
\param pfRestartNeeded - pointer to a caller allocated space. Upon successful return, it indicates whether
a restart is needed to apply the change
\return eHalStatus
-------------------------------------------------------------------------------*/
eHalStatus csrSetPhyMode(tHalHandle hHal, tANI_U32 phyMode, eCsrBand eBand, tANI_BOOLEAN *pfRestartNeeded);
void csrDumpInit(tHalHandle hHal);
/*---------------------------------------------------------------------------
This is the type for a link quality callback to be registered with SME
for indications
Once the link quality has been indicated, subsequently, link indications are
posted each time there is a CHANGE in link quality.
*** If there is no change in link, there will be no indication ***
The indications may be based on one or more criteria internal to SME
such as RSSI and PER.
\param ind - Indication being posted
\param pContext - any user data given at callback registration.
\return None
---------------------------------------------------------------------------*/
typedef void (* csrRoamLinkQualityIndCallback)
(eCsrRoamLinkQualityInd ind, void *pContext);
/*---------------------------------------------------------------------------
This is the type for a statistics callback to be registered with SME
for stats reporting
Since the client requesting for the stats already know which class/type of
stats it asked for, the callback will carry them in the rsp buffer
(void * stats) whose size will be same as the size of requested stats &
will be exactly in the same order requested in the stats mask from LSB to MSB
\param stats - stats rsp buffer sent back with the report
\param pContext - any user data given at callback registration.
\return None
---------------------------------------------------------------------------*/
typedef void ( *tCsrStatsCallback) (void * stats, void *pContext);
/*---------------------------------------------------------------------------
This is the type for a rssi callback to be registered with SME
for getting rssi
\param rssi - rssi
\param pContext - any user data given at callback registration.
\return None
---------------------------------------------------------------------------*/
typedef void ( *tCsrRssiCallback) (v_S7_t rssi, tANI_U32 staId, void *pContext);
#if defined(FEATURE_WLAN_ESE) && defined(FEATURE_WLAN_ESE_UPLOAD)
/*---------------------------------------------------------------------------
This is the type for a tsm stats callback to be registered with SME
for getting tsm stats
\param tsmMetrics - tsmMetrics
\param pContext - any user data given at callback registration.
\return None
---------------------------------------------------------------------------*/
typedef void ( *tCsrTsmStatsCallback) (tAniTrafStrmMetrics tsmMetrics, tANI_U32 staId, void *pContext);
#endif /* FEATURE_WLAN_ESE && FEATURE_WLAN_ESE_UPLOAD */
/*---------------------------------------------------------------------------
This is the type for a snr callback to be registered with SME
for getting snr
\param snr
\param pContext - any user data given at callback registration.
\return None
---------------------------------------------------------------------------*/
typedef void (*tCsrSnrCallback) (v_S7_t snr, tANI_U32 staId, void *pContext);
/*---------------------------------------------------------------------------
This is the type for a get current antenna callback to be registered with SME
for getting cuurently used antenna index
\param antennaId to be filled by firmware.
\param pContext - any user data given at callback registration.
\return None
---------------------------------------------------------------------------*/
typedef void ( *tCsrAntennaIndexCallback) (int antennaId, void *pContext);
#ifdef WLAN_FEATURE_VOWIFI_11R
eHalStatus csrRoamIssueFTPreauthReq(tHalHandle hHal, tANI_U32 sessionId, tpSirBssDescription pBssDescription);
#endif
/*---------------------------------------------------------------------------
This is the function to change the Band configuraiton (ALL/2.4 GHZ/5 GHZ)
\param hHal - handle to Hal context
\param eBand - band value
\return eHalStatus
---------------------------------------------------------------------------*/
eHalStatus csrSetBand(tHalHandle hHal, eCsrBand eBand);
/*---------------------------------------------------------------------------
This is the function to get the current operating band value
\param hHal - handl to Hal context
\return eCsrband - band value
---------------------------------------------------------------------------*/
eCsrBand csrGetCurrentBand (tHalHandle hHal);
/**
* csrConvertCBIniValueToPhyCBState() - convert ini CB value to Phy CB val
* @cb_ini_value: ini value of cb mode
*
* Return: phy CB val
*/
ePhyChanBondState csrConvertCBIniValueToPhyCBState(v_U32_t cb_ini_val);
#endif