Gitiles
Code Review Sign In
gerrit-public.fairphone.software / platform / vendor / qcom-opensource / wlan / prima / 978210714e2038eec41f5418d38ffcdbc9692129 / . / CORE / HDD / inc / wlan_hdd_cfg.h
blob: 7d63f0c9b13ae2675db8cbe56f572713cd22c03e [file] [log] [blame]
/*
* Copyright (c) 2012-2019 The Linux Foundation. All rights reserved.
*
* Previously licensed under the ISC license by Qualcomm Atheros, Inc.
*
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/*
* This file was originally distributed by Qualcomm Atheros, Inc.
* under proprietary terms before Copyright ownership was assigned
* to the Linux Foundation.
*/
#if !defined( HDD_CONFIG_H__ )
#define HDD_CONFIG_H__
/**===========================================================================
\file hdd_Config.h
\brief Android WLAN Adapter Configuration functions
==========================================================================*/
/* $HEADER$ */
/*---------------------------------------------------------------------------
Include files
-------------------------------------------------------------------------*/
#include <wlan_hdd_includes.h>
#include <wlan_hdd_wmm.h>
#include <vos_types.h>
#include <csrApi.h>
#ifdef DHCP_SERVER_OFFLOAD
#define IPADDR_NUM_ENTRIES (4)
#define IPADDR_STRING_LENGTH (16)
#define DHCP_START_POOL_ADDRESS 100
#endif /* DHCP_SERVER_OFFLOAD */
//Number of items that can be configured
#define MAX_CFG_INI_ITEMS 1024
#ifdef SAP_AUTH_OFFLOAD
/* 802.11 pre-share key length */
#define WLAN_PSK_STRING_LENGTH (64)
#endif /* SAP_AUTH_OFFLOAD */
/*
* Maximum length of the default SAP interface created using
* gEnabledefaultSAP ini param.
*/
#define CFG_CONCURRENT_IFACE_MAX_LEN 16
// Defines for all of the things we read from the configuration (registry).
#define CFG_RTS_THRESHOLD_NAME "RTSThreshold"
#define CFG_RTS_THRESHOLD_MIN WNI_CFG_RTS_THRESHOLD_STAMIN // min is 0, meaning always use RTS.
#define CFG_RTS_THRESHOLD_MAX WNI_CFG_RTS_THRESHOLD_STAMAX // max is the max frame size
#define CFG_RTS_THRESHOLD_DEFAULT WNI_CFG_RTS_THRESHOLD_STADEF
#define CFG_FRAG_THRESHOLD_NAME "gFragmentationThreshold"
#define CFG_FRAG_THRESHOLD_MIN WNI_CFG_FRAGMENTATION_THRESHOLD_STAMIN
#define CFG_FRAG_THRESHOLD_MAX WNI_CFG_FRAGMENTATION_THRESHOLD_STAMAX
#define CFG_FRAG_THRESHOLD_DEFAULT WNI_CFG_FRAGMENTATION_THRESHOLD_STADEF
#define CFG_CALIBRATION_NAME "gCalibration"
#define CFG_CALIBRATION_MIN ( 0 )
#define CFG_CALIBRATION_MAX ( 1 )
#define CFG_CALIBRATION_MAC_DEFAULT ( 1 )
#define CFG_CALIBRATION_DEFAULT CFG_CALIBRATION_MAC_DEFAULT
#define CFG_CALIBRATION_PERIOD_NAME "gCalibrationPeriod"
#define CFG_CALIBRATION_PERIOD_MIN ( 2 )
#define CFG_CALIBRATION_PERIOD_MAX ( 10 )
#define CFG_CALIBRATION_PERIOD_MAC_DEFAULT ( 5 )
#define CFG_CALIBRATION_PERIOD_DEFAULT CFG_CALIBRATION_PERIOD_MAC_DEFAULT
#define CFG_OPERATING_CHANNEL_NAME "gOperatingChannel"
#define CFG_OPERATING_CHANNEL_MIN ( 0 )
#define CFG_OPERATING_CHANNEL_MAX ( 14 )
#define CFG_OPERATING_CHANNEL_DEFAULT ( 1 )
#define CFG_SHORT_SLOT_TIME_ENABLED_NAME "gShortSlotTimeEnabled"
#define CFG_SHORT_SLOT_TIME_ENABLED_MIN WNI_CFG_SHORT_SLOT_TIME_STAMIN
#define CFG_SHORT_SLOT_TIME_ENABLED_MAX WNI_CFG_SHORT_SLOT_TIME_STAMAX
#define CFG_SHORT_SLOT_TIME_ENABLED_DEFAULT WNI_CFG_SHORT_SLOT_TIME_STADEF
#define CFG_11D_SUPPORT_ENABLED_NAME "g11dSupportEnabled"
#define CFG_11D_SUPPORT_ENABLED_MIN WNI_CFG_11D_ENABLED_STAMIN
#define CFG_11D_SUPPORT_ENABLED_MAX WNI_CFG_11D_ENABLED_STAMAX
#define CFG_11D_SUPPORT_ENABLED_DEFAULT WNI_CFG_11D_ENABLED_STADEF // Default is ON
#define CFG_11H_SUPPORT_ENABLED_NAME "g11hSupportEnabled"
#define CFG_11H_SUPPORT_ENABLED_MIN ( 0 )
#define CFG_11H_SUPPORT_ENABLED_MAX ( 1 )
#define CFG_11H_SUPPORT_ENABLED_DEFAULT ( 1 ) // Default is ON
#define CFG_ENFORCE_11D_CHANNELS_NAME "gEnforce11dChannel"
#define CFG_ENFORCE_11D_CHANNELS_MIN ( 0 )
#define CFG_ENFORCE_11D_CHANNELS_MAX ( 1 )
#define CFG_ENFORCE_11D_CHANNELS_DEFAULT ( 0 )
//COUNTRY Code Priority
#define CFG_COUNTRY_CODE_PRIORITY_NAME "gCountryCodePriority"
#define CFG_COUNTRY_CODE_PRIORITY_MIN ( 0 )
#define CFG_COUNTRY_CODE_PRIORITY_MAX ( 1 )
#define CFG_COUNTRY_CODE_PRIORITY_DEFAULT ( 1 )
#define CFG_ENFORCE_COUNTRY_CODE_MATCH_NAME "gEnforceCountryCodeMatch"
#define CFG_ENFORCE_COUNTRY_CODE_MATCH_MIN ( 0 )
#define CFG_ENFORCE_COUNTRY_CODE_MATCH_MAX ( 1 )
#define CFG_ENFORCE_COUNTRY_CODE_MATCH_DEFAULT ( 0 )
#define CFG_ENFORCE_DEFAULT_DOMAIN_NAME "gEnforceDefaultDomain"
#define CFG_ENFORCE_DEFAULT_DOMAIN_MIN ( 0 )
#define CFG_ENFORCE_DEFAULT_DOMAIN_MAX ( 1 )
#define CFG_ENFORCE_DEFAULT_DOMAIN_DEFAULT ( 0 )
#define CFG_GENERIC_ID1_NAME "gCfg1Id"
#define CFG_GENERIC_ID1_MIN ( 0 )
#define CFG_GENERIC_ID1_MAX ( 0xffffffff )
#define CFG_GENERIC_ID1_DEFAULT ( 0 )
#define CFG_GENERIC_ID2_NAME "gCfg2Id"
#define CFG_GENERIC_ID2_MIN ( 0 )
#define CFG_GENERIC_ID2_MAX ( 0xffffffff )
#define CFG_GENERIC_ID2_DEFAULT ( 0 )
#define CFG_GENERIC_ID3_NAME "gCfg3Id"
#define CFG_GENERIC_ID3_MIN ( 0 )
#define CFG_GENERIC_ID3_MAX ( 0xffffffff )
#define CFG_GENERIC_ID3_DEFAULT ( 0 )
#define CFG_GENERIC_ID4_NAME "gCfg4Id"
#define CFG_GENERIC_ID4_MIN ( 0 )
#define CFG_GENERIC_ID4_MAX ( 0xffffffff )
#define CFG_GENERIC_ID4_DEFAULT ( 0 )
#define CFG_GENERIC_ID5_NAME "gCfg5Id"
#define CFG_GENERIC_ID5_MIN ( 0 )
#define CFG_GENERIC_ID5_MAX ( 0xffffffff )
#define CFG_GENERIC_ID5_DEFAULT ( 0 )
#define CFG_GENERIC_VALUE1_NAME "gCfg1Value"
#define CFG_GENERIC_VALUE1_MIN ( 0 )
#define CFG_GENERIC_VALUE1_MAX ( 0xffffffff )
#define CFG_GENERIC_VALUE1_DEFAULT ( 0 )
#define CFG_GENERIC_VALUE2_NAME "gCfg2Value"
#define CFG_GENERIC_VALUE2_MIN ( 0 )
#define CFG_GENERIC_VALUE2_MAX ( 0xffffffff )
#define CFG_GENERIC_VALUE2_DEFAULT ( 0 )
#define CFG_GENERIC_VALUE3_NAME "gCfg3Value"
#define CFG_GENERIC_VALUE3_MIN ( 0 )
#define CFG_GENERIC_VALUE3_MAX ( 0xffffffff )
#define CFG_GENERIC_VALUE3_DEFAULT ( 0 )
#define CFG_GENERIC_VALUE4_NAME "gCfg4Value"
#define CFG_GENERIC_VALUE4_MIN ( 0 )
#define CFG_GENERIC_VALUE4_MAX ( 0xffffffff )
#define CFG_GENERIC_VALUE4_DEFAULT ( 0 )
#define CFG_GENERIC_VALUE5_NAME "gCfg5Value"
#define CFG_GENERIC_VALUE5_MIN ( 0 )
#define CFG_GENERIC_VALUE5_MAX ( 0xffffffff )
#define CFG_GENERIC_VALUE5_DEFAULT ( 0 )
#define CFG_HEARTBEAT_THRESH_24_NAME "gHeartbeat24"
#define CFG_HEARTBEAT_THRESH_24_MIN WNI_CFG_HEART_BEAT_THRESHOLD_STAMIN
#define CFG_HEARTBEAT_THRESH_24_MAX WNI_CFG_HEART_BEAT_THRESHOLD_STAMAX
#define CFG_HEARTBEAT_THRESH_24_DEFAULT WNI_CFG_HEART_BEAT_THRESHOLD_STADEF
#define CFG_POWER_USAGE_NAME "gPowerUsage"
#define CFG_POWER_USAGE_MIN "Min" //Minimum Power Save
#define CFG_POWER_USAGE_MAX "Max" //Maximum Power Save
#define CFG_POWER_USAGE_DEFAULT "Mod" //Moderate Power Save
//Enable suspend on Android
#define CFG_ENABLE_SUSPEND_NAME "gEnableSuspend"
#define CFG_ENABLE_SUSPEND_MIN ( 0 ) //No support for suspend
#define CFG_ENABLE_SUSPEND_MAX ( 3 ) //Map to Deep Sleep
#define CFG_ENABLE_SUSPEND_DEFAULT ( 1 ) //Map to Standby
//Driver start/stop command mappings
#define CFG_ENABLE_ENABLE_DRIVER_STOP_NAME "gEnableDriverStop"
#define CFG_ENABLE_ENABLE_DRIVER_STOP_MIN ( 0 ) //No support for stop
#define CFG_ENABLE_ENABLE_DRIVER_STOP_MAX ( 2 ) //Map to Deep Sleep
#define CFG_ENABLE_ENABLE_DRIVER_STOP_DEFAULT ( 0 )
#define CFG_WOWL_PATTERN_NAME "gWowlPattern"
#define CFG_WOWL_PATTERN_DEFAULT ""
//IMPS = IdleModePowerSave
#define CFG_ENABLE_IMPS_NAME "gEnableImps"
#define CFG_ENABLE_IMPS_MIN ( 0 )
#define CFG_ENABLE_IMPS_MAX ( 1 )
#define CFG_ENABLE_IMPS_DEFAULT ( 1 )
//SSR = SubSytemRestart
#define CFG_SSR_PANIC_ON_FAILURE_NAME "gSsrPanicOnFailure"
#define CFG_SSR_PANIC_ON_FAILURE_MIN ( 0 )
#define CFG_SSR_PANIC_ON_FAILURE_MAX ( 1 )
#define CFG_SSR_PANIC_ON_FAILURE_DEFAULT ( 0 )
#define CFG_IMPS_MINIMUM_SLEEP_TIME_NAME "gImpsMinSleepTime"
#define CFG_IMPS_MINIMUM_SLEEP_TIME_MIN ( 0 )
#define CFG_IMPS_MINIMUM_SLEEP_TIME_MAX ( 65535 )
#define CFG_IMPS_MINIMUM_SLEEP_TIME_DEFAULT ( 5 )
#define CFG_IMPS_MODERATE_SLEEP_TIME_NAME "gImpsModSleepTime"
#define CFG_IMPS_MODERATE_SLEEP_TIME_MIN ( 0 )
#define CFG_IMPS_MODERATE_SLEEP_TIME_MAX ( 65535 )
#define CFG_IMPS_MODERATE_SLEEP_TIME_DEFAULT ( 10)
#define CFG_IMPS_MAXIMUM_SLEEP_TIME_NAME "gImpsMaxSleepTime"
#define CFG_IMPS_MAXIMUM_SLEEP_TIME_MIN ( 0 )
#define CFG_IMPS_MAXIMUM_SLEEP_TIME_MAX ( 65535 )
#define CFG_IMPS_MAXIMUM_SLEEP_TIME_DEFAULT ( 15 )
/*If there is scan on STA interface back to back with
*time diff nDeferScanTimeInterval, driver will not
*issue a new scan. Driver will return cached result to kernel.
*the interval is in msec
*/
#define CFG_DEFER_SCAN_TIME_INTERVAL "gDeferScanTimeInterval"
#define CFG_DEFER_SCAN_TIME_INTERVAL_MIN ( 0 )
#define CFG_DEFER_SCAN_TIME_INTERVAL_MAX ( 65535 )
#define CFG_DEFER_SCAN_TIME_INTERVAL_DEFAULT ( 2000 )
//BMPS = BeaconModePowerSave
#define CFG_ENABLE_BMPS_NAME "gEnableBmps"
#define CFG_ENABLE_BMPS_MIN ( 0 )
#define CFG_ENABLE_BMPS_MAX ( 1 )
#define CFG_ENABLE_BMPS_DEFAULT ( 1 )
#define CFG_BMPS_MINIMUM_LI_NAME "gBmpsMinListenInterval"
#define CFG_BMPS_MINIMUM_LI_MIN ( 1 )
#define CFG_BMPS_MINIMUM_LI_MAX ( 65535 )
#define CFG_BMPS_MINIMUM_LI_DEFAULT ( 1 )
#define CFG_BMPS_MODERATE_LI_NAME "gBmpsModListenInterval"
#define CFG_BMPS_MODERATE_LI_MIN ( 1 )
#define CFG_BMPS_MODERATE_LI_MAX ( 65535 )
#define CFG_BMPS_MODERATE_LI_DEFAULT ( 1 )
#define CFG_BMPS_MAXIMUM_LI_NAME "gBmpsMaxListenInterval"
#define CFG_BMPS_MAXIMUM_LI_MIN ( 1 )
#define CFG_BMPS_MAXIMUM_LI_MAX ( 65535 )
#define CFG_BMPS_MAXIMUM_LI_DEFAULT ( 1 )
// gEnableAutoBmpsTimer has been previously published as an externally
// configurable parameter. See analysis of CR 178211 for detailed info
// on why we want to *always* set this to 1 i.e. we no longer want
// this parameter to be configurable. the clean solution would be for
// users to not define this item in winreg so that the default value
// (which needs to be changed to 1) gets picked up but we cannot rely on that
// since this item has been published already hence the proposed
// solution to change the name of the item along with the change in the
// default value. also we could decide to not read this item from registry
// but leaving open the option of being able to configure this item for
// ASW's internal use
#define CFG_ENABLE_AUTO_BMPS_TIMER_NAME "gEnableAutoBmpsTimer_INTERNAL"
#define CFG_ENABLE_AUTO_BMPS_TIMER_MIN ( 0 )
#define CFG_ENABLE_AUTO_BMPS_TIMER_MAX ( 1 )
#define CFG_ENABLE_AUTO_BMPS_TIMER_DEFAULT ( 1 )
/*
* gEnableDynamicRAstartRate usage:
*
* 11B and 11A/G rates can be specified in multiples of 0.5
* So for 5.5 mbps, gEnableDynamicRAstartRate=11
* and for 12 mbps, gEnableDynamicRAstartRate=24 etc.
*
* for MCS 0 - 7 rates, Bit 7 should set to 1 and Bit 0-6
* represent the MCS index.
* So for MCS0, gEnableDynamicRAstartRate=128
* and for MCS2, gEnableDynamicRAstartRate=130 etc.
*
* Any invalid non-zero value will set the start rate
* to 6 mbps (value 1 will also set it to 6 mbps)
*
* Bit 8 is used to enable PER discount logic in RA
* Ex: if PER discount logic needs to be enabled along with
* RA start rate as 6mbps:
* (Bit 8 for PER discount logic and Bit 0 for 6 mbps)
* gEnableDynamicRAstartRate=257
*/
#define CFG_ENABLE_DYNAMIC_RA_START_RATE_NAME "gEnableDynamicRAstartRate"
#define CFG_ENABLE_DYNAMIC_RA_START_RATE_MIN (0)
#define CFG_ENABLE_DYNAMIC_RA_START_RATE_MAX (65535)
#define CFG_ENABLE_DYNAMIC_RA_START_RATE_DEFAULT (0)
/*
* gEnableRTTsupport
*
* @Min: 0 - Disabled
* @Max: 1 - Enabled
* @Default: 1 - Enabled
*
* The param is used to enable/disable support for RTT
*/
#define CFG_ENABLE_RTT_SUPPORT "gEnableRTTSupport"
#define CFG_ENABLE_RTT_SUPPORT_DEFAULT (1)
#define CFG_ENABLE_RTT_SUPPORT_MIN (0)
#define CFG_ENABLE_RTT_SUPPORT_MAX (1)
/* Bit mask value to enable RTS/CTS for different modes
* for 2.4 GHz, HT20 - 0x0001, for 2.4 GHz, HT40 - 0x0002
* for 2.4 GHz, VHT20 - 0x0004, for 2.4 GHz, VHT40 - 0x0008
* for 5 GHz, HT20 - 0x0100, for 5 GHz, HT40 - 0x0200
* for 5 GHz, VHT20 - 0x0400, for 5 GHz, VHT40 - 0x0800
* for 5 GHz, VHT80 - 0x1000
*/
#define CFG_ENABLE_RTSCTS_HTVHT_NAME "gEnableRtsCtsHtVht"
#define CFG_ENABLE_RTSCTS_HTVHT_MIN ( 0x0000 )
#define CFG_ENABLE_RTSCTS_HTVHT_MAX ( 0x1f0f )
#define CFG_ENABLE_RTSCTS_HTVHT_DEFAULT ( 0x0000 )
#define CFG_AUTO_BMPS_TIMER_VALUE_NAME "gAutoBmpsTimerValue"
#define CFG_AUTO_BMPS_TIMER_VALUE_MIN ( 1000 )
#define CFG_AUTO_BMPS_TIMER_VALUE_MAX ( 4294967295UL )
#define CFG_AUTO_BMPS_TIMER_VALUE_DEFAULT ( 1000 )
#define CFG_MAX_RX_AMPDU_FACTOR_NAME "gMaxRxAmpduFactor"
#define CFG_MAX_RX_AMPDU_FACTOR_MIN WNI_CFG_MAX_RX_AMPDU_FACTOR_STAMIN
#define CFG_MAX_RX_AMPDU_FACTOR_MAX WNI_CFG_MAX_RX_AMPDU_FACTOR_STAMAX
#define CFG_MAX_RX_AMPDU_FACTOR_DEFAULT WNI_CFG_MAX_RX_AMPDU_FACTOR_STADEF
//Configuration added to enable/disable CTS2SELF in
//Adaptive RX drain feature
#define CFG_ENABLE_ADAPT_RX_DRAIN_NAME "gEnableAdaptRxDrain"
#define CFG_ENABLE_ADAPT_RX_DRAIN_MIN WNI_CFG_ENABLE_ADAPT_RX_DRAIN_STAMIN
#define CFG_ENABLE_ADAPT_RX_DRAIN_MAX WNI_CFG_ENABLE_ADAPT_RX_DRAIN_STAMAX
#define CFG_ENABLE_ADAPT_RX_DRAIN_DEFAULT WNI_CFG_ENABLE_ADAPT_RX_DRAIN_STADEF
typedef enum
{
eHDD_DOT11_MODE_AUTO = 0, //covers all things we support
eHDD_DOT11_MODE_abg, //11a/b/g only, no HT, no proprietary
eHDD_DOT11_MODE_11b,
eHDD_DOT11_MODE_11g,
eHDD_DOT11_MODE_11n,
eHDD_DOT11_MODE_11g_ONLY,
eHDD_DOT11_MODE_11n_ONLY,
eHDD_DOT11_MODE_11b_ONLY,
#ifdef WLAN_FEATURE_11AC
eHDD_DOT11_MODE_11ac_ONLY,
eHDD_DOT11_MODE_11ac,
#endif
}eHddDot11Mode;
#define CFG_DOT11_MODE_NAME "gDot11Mode"
#define CFG_DOT11_MODE_MIN eHDD_DOT11_MODE_AUTO
#ifdef WLAN_FEATURE_11AC
#define CFG_DOT11_MODE_MAX eHDD_DOT11_MODE_11ac
#define CFG_DOT11_MODE_DEFAULT eHDD_DOT11_MODE_11ac
#else
#define CFG_DOT11_MODE_MAX eHDD_DOT11_MODE_11b_ONLY
#define CFG_DOT11_MODE_DEFAULT eHDD_DOT11_MODE_11n
#endif
#define CFG_SAP_ENABLE_11AC_NAME "gSapEnable11AC"
#define CFG_SAP_ENABLE_11AC_MIN ( 0 )
#define CFG_SAP_ENABLE_11AC_MAX ( 1 )
#define CFG_SAP_ENABLE_11AC_DEFAULT ( 1 )
#define CFG_CHANNEL_BONDING_MODE_24GHZ_NAME "gChannelBondingMode24GHz"
#define CFG_CHANNEL_BONDING_MODE_MIN WNI_CFG_CHANNEL_BONDING_MODE_STAMIN
#define CFG_CHANNEL_BONDING_MODE_MAX WNI_CFG_CHANNEL_BONDING_MODE_STAMAX
#define CFG_CHANNEL_BONDING_MODE_DEFAULT WNI_CFG_CHANNEL_BONDING_MODE_STADEF
#define CFG_OVERRIDE_HT40_20_24GHZ_NAME "override_ht20_40_24g"
#define CFG_OVERRIDE_HT40_20_24GHZ_MIN 0
#define CFG_OVERRIDE_HT40_20_24GHZ_MAX 1
#define CFG_OVERRIDE_HT40_20_24GHZ_DEFAULT 0
#define CFG_CHANNEL_BONDING_MODE_5GHZ_NAME "gChannelBondingMode5GHz"
#define CFG_CHANNEL_BONDING_MODE_MIN WNI_CFG_CHANNEL_BONDING_MODE_STAMIN
#define CFG_CHANNEL_BONDING_MODE_MAX WNI_CFG_CHANNEL_BONDING_MODE_STAMAX
#define CFG_CHANNEL_BONDING_MODE_DEFAULT WNI_CFG_CHANNEL_BONDING_MODE_STADEF
#define CFG_FIXED_RATE_NAME "gFixedRate"
#define CFG_FIXED_RATE_MIN WNI_CFG_FIXED_RATE_STAMIN
#define CFG_FIXED_RATE_MAX WNI_CFG_FIXED_RATE_STAMAX
#define CFG_FIXED_RATE_DEFAULT WNI_CFG_FIXED_RATE_STADEF
#define CFG_SHORT_GI_20MHZ_NAME "gShortGI20Mhz"
#define CFG_SHORT_GI_20MHZ_MIN WNI_CFG_SHORT_GI_20MHZ_STAMIN
#define CFG_SHORT_GI_20MHZ_MAX WNI_CFG_SHORT_GI_20MHZ_STAMAX
#define CFG_SHORT_GI_20MHZ_DEFAULT WNI_CFG_SHORT_GI_20MHZ_STADEF
#define CFG_BLOCK_ACK_AUTO_SETUP_NAME "gBlockAckAutoSetup"
#define CFG_BLOCK_ACK_AUTO_SETUP_MIN ( 0 )
#define CFG_BLOCK_ACK_AUTO_SETUP_MAX ( 1 )
#define CFG_BLOCK_ACK_AUTO_SETUP_DEFAULT ( 1 )
#define CFG_SCAN_RESULT_AGE_COUNT_NAME "gScanResultAgeCount"
#define CFG_SCAN_RESULT_AGE_COUNT_MIN ( 1 )
#define CFG_SCAN_RESULT_AGE_COUNT_MAX ( 100 )
#define CFG_SCAN_RESULT_AGE_COUNT_DEFAULT ( 3 )
//All in seconds
//Not Connect, No Power Save
#define CFG_SCAN_RESULT_AGE_TIME_NCNPS_NAME "gScanResultAgeNCNPS"
#define CFG_SCAN_RESULT_AGE_TIME_NCNPS_MIN ( 10 )
#define CFG_SCAN_RESULT_AGE_TIME_NCNPS_MAX ( 10000 )
#define CFG_SCAN_RESULT_AGE_TIME_NCNPS_DEFAULT ( 50 )
//Not Connect, Power Save
#define CFG_SCAN_RESULT_AGE_TIME_NCPS_NAME "gScanResultAgeNCPS"
#define CFG_SCAN_RESULT_AGE_TIME_NCPS_MIN ( 10 )
#define CFG_SCAN_RESULT_AGE_TIME_NCPS_MAX ( 10000 )
#define CFG_SCAN_RESULT_AGE_TIME_NCPS_DEFAULT ( 300 )
//Connect, No Power Save
#define CFG_SCAN_RESULT_AGE_TIME_CNPS_NAME "gScanResultAgeCNPS"
#define CFG_SCAN_RESULT_AGE_TIME_CNPS_MIN ( 10 )
#define CFG_SCAN_RESULT_AGE_TIME_CNPS_MAX ( 10000 )
#define CFG_SCAN_RESULT_AGE_TIME_CNPS_DEFAULT ( 150 )
//Connect, Power Save
#define CFG_SCAN_RESULT_AGE_TIME_CPS_NAME "gScanResultAgeCPS"
#define CFG_SCAN_RESULT_AGE_TIME_CPS_MIN ( 10 )
#define CFG_SCAN_RESULT_AGE_TIME_CPS_MAX ( 10000 )
#define CFG_SCAN_RESULT_AGE_TIME_CPS_DEFAULT ( 600 )
#define CFG_RSSI_CATEGORY_GAP_NAME "gRssiCatGap"
#define CFG_RSSI_CATEGORY_GAP_MIN ( 5 )
#define CFG_RSSI_CATEGORY_GAP_MAX ( 100 )
#define CFG_RSSI_CATEGORY_GAP_DEFAULT ( 5 )
#if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR)
#define CFG_ROAM_PREFER_5GHZ "gRoamPrefer5GHz"
#define CFG_ROAM_PREFER_5GHZ_MIN ( 0 )
#define CFG_ROAM_PREFER_5GHZ_MAX ( 1 )
#define CFG_ROAM_PREFER_5GHZ_DEFAULT ( 1 )
/*
To enable, set gRoamIntraBand=1 (Roaming within band)
To disable, set gRoamIntraBand=0 (Roaming across band)
*/
#define CFG_ROAM_INTRA_BAND "gRoamIntraBand"
#define CFG_ROAM_INTRA_BAND_MIN ( 0 )
#define CFG_ROAM_INTRA_BAND_MAX ( 1 )
#define CFG_ROAM_INTRA_BAND_DEFAULT ( 0 )
#endif
#define CFG_SHORT_PREAMBLE_NAME "gShortPreamble"
#define CFG_SHORT_PREAMBLE_MIN WNI_CFG_SHORT_PREAMBLE_STAMIN
#define CFG_SHORT_PREAMBLE_MAX WNI_CFG_SHORT_PREAMBLE_STAMAX
#define CFG_SHORT_PREAMBLE_DEFAULT WNI_CFG_SHORT_PREAMBLE_STADEF
#define CFG_IBSS_AUTO_BSSID_NAME "gAutoIbssBssid"
#define CFG_IBSS_AUTO_BSSID_MIN WNI_CFG_IBSS_AUTO_BSSID_STAMIN
#define CFG_IBSS_AUTO_BSSID_MAX WNI_CFG_IBSS_AUTO_BSSID_STAMAX
#define CFG_IBSS_AUTO_BSSID_DEFAULT WNI_CFG_IBSS_AUTO_BSSID_STADEF
#define CFG_IBSS_BSSID_NAME "gIbssBssid"
#define CFG_IBSS_BSSID_MIN "000000000000"
#define CFG_IBSS_BSSID_MAX "ffffffffffff"
#define CFG_IBSS_BSSID_DEFAULT "000AF5040506"
#define CFG_INTF0_MAC_ADDR_NAME "Intf0MacAddress"
#define CFG_INTF0_MAC_ADDR_MIN "000000000000"
#define CFG_INTF0_MAC_ADDR_MAX "ffffffffffff"
#define CFG_INTF0_MAC_ADDR_DEFAULT "000AF5898980"
#define CFG_INTF1_MAC_ADDR_NAME "Intf1MacAddress"
#define CFG_INTF1_MAC_ADDR_MIN "000000000000"
#define CFG_INTF1_MAC_ADDR_MAX "ffffffffffff"
#define CFG_INTF1_MAC_ADDR_DEFAULT "000AF5898981"
#define CFG_INTF2_MAC_ADDR_NAME "Intf2MacAddress"
#define CFG_INTF2_MAC_ADDR_MIN "000000000000"
#define CFG_INTF2_MAC_ADDR_MAX "ffffffffffff"
#define CFG_INTF2_MAC_ADDR_DEFAULT "000AF5898982"
#define CFG_INTF3_MAC_ADDR_NAME "Intf3MacAddress"
#define CFG_INTF3_MAC_ADDR_MIN "000000000000"
#define CFG_INTF3_MAC_ADDR_MAX "ffffffffffff"
#define CFG_INTF3_MAC_ADDR_DEFAULT "000AF5898983"
#define CFG_AP_QOS_UAPSD_MODE_NAME "gEnableApUapsd" // ACs to setup U-APSD for at assoc
#define CFG_AP_QOS_UAPSD_MODE_MIN ( 0 )
#define CFG_AP_QOS_UAPSD_MODE_MAX ( 1 )
#define CFG_AP_QOS_UAPSD_MODE_DEFAULT ( 1 )
#define CFG_AP_COUNTRY_CODE "gAPCntryCode"
#define CFG_AP_COUNTRY_CODE_MIN "USI"
#define CFG_AP_COUNTRY_CODE_MAX "USI"
#define CFG_AP_COUNTRY_CODE_DEFAULT "FFF"
#define CFG_AP_ENABLE_RANDOM_BSSID_NAME "gEnableApRandomBssid"
#define CFG_AP_ENABLE_RANDOM_BSSID_MIN ( 0 )
#define CFG_AP_ENABLE_RANDOM_BSSID_MAX ( 1 )
#define CFG_AP_ENABLE_RANDOM_BSSID_DEFAULT ( 0 )
#define CFG_AP_ENABLE_PROTECTION_MODE_NAME "gEnableApProt"
#define CFG_AP_ENABLE_PROTECTION_MODE_MIN ( 0 )
#define CFG_AP_ENABLE_PROTECTION_MODE_MAX ( 1 )
#define CFG_AP_ENABLE_PROTECTION_MODE_DEFAULT ( 1 )
// Bit map for CFG_AP_PROTECTION_MODE_DEFAULT
// LOWER byte for associated stations
// UPPER byte for overlapping stations
// each byte will have the following info
// bit15 bit14 bit13 bit12 bit11 bit10 bit9 bit8
// OBSS RIFS LSIG_TXOP NON_GF HT20 FROM_11G FROM_11B FROM_11A
// bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
// OBSS RIFS LSIG_TXOP NON_GF HT_20 FROM_11G FROM_11B FROM_11A
#define CFG_AP_PROTECTION_MODE_NAME "gApProtection"
#define CFG_AP_PROTECTION_MODE_MIN ( 0x0 )
#define CFG_AP_PROTECTION_MODE_MAX ( 0xFFFF )
#define CFG_AP_PROTECTION_MODE_DEFAULT ( 0xBFFF )
#define CFG_AP_OBSS_PROTECTION_MODE_NAME "gEnableApOBSSProt"
#define CFG_AP_OBSS_PROTECTION_MODE_MIN ( 0 )
#define CFG_AP_OBSS_PROTECTION_MODE_MAX ( 1 )
#define CFG_AP_OBSS_PROTECTION_MODE_DEFAULT ( 0 )
#define CFG_AP_STA_SECURITY_SEPERATION_NAME "gDisableIntraBssFwd"
#define CFG_AP_STA_SECURITY_SEPERATION_MIN ( 0 )
#define CFG_AP_STA_SECURITY_SEPERATION_MAX ( 1 )
#define CFG_AP_STA_SECURITY_SEPERATION_DEFAULT ( 0 )
#define CFG_AP_LISTEN_MODE_NAME "gEnablePhyAgcListenMode"
#define CFG_AP_LISTEN_MODE_MIN (0)
#define CFG_AP_LISTEN_MODE_MAX (128)
#define CFG_AP_LISTEN_MODE_DEFAULT (128)
#define CFG_AP_AUTO_SHUT_OFF "gAPAutoShutOff"
#define CFG_AP_AUTO_SHUT_OFF_MIN ( 0 )
#define CFG_AP_AUTO_SHUT_OFF_MAX ( 4294967295UL )
#define CFG_AP_AUTO_SHUT_OFF_DEFAULT ( 0 )
#define CFG_FRAMES_PROCESSING_TH_MODE_NAME "gMinFramesProcThres"
#define CFG_FRAMES_PROCESSING_TH_MIN ( 0 )
#define CFG_FRAMES_PROCESSING_TH_MAX ( 39 )
#define CFG_FRAMES_PROCESSING_TH_DEFAULT ( 0 )
#define CFG_SAP_CHANNEL_SELECT_START_CHANNEL "gAPChannelSelectStartChannel"
#define CFG_SAP_CHANNEL_SELECT_START_CHANNEL_MIN (0)
#define CFG_SAP_CHANNEL_SELECT_START_CHANNEL_MAX (0xFF)
#define CFG_SAP_CHANNEL_SELECT_START_CHANNEL_DEFAULT (0)
#define CFG_SAP_CHANNEL_SELECT_END_CHANNEL "gAPChannelSelectEndChannel"
#define CFG_SAP_CHANNEL_SELECT_END_CHANNEL_MIN (0)
#define CFG_SAP_CHANNEL_SELECT_END_CHANNEL_MAX (0xFF)
#define CFG_SAP_CHANNEL_SELECT_END_CHANNEL_DEFAULT (11)
#define CFG_SAP_CHANNEL_SELECT_OPERATING_BAND "gAPChannelSelectOperatingBand"
#define CFG_SAP_CHANNEL_SELECT_OPERATING_BAND_MIN (0)
#define CFG_SAP_CHANNEL_SELECT_OPERATING_BAND_MAX (0x5)
#define CFG_SAP_CHANNEL_SELECT_OPERATING_BAND_DEFAULT (0)
#define CFG_DISABLE_PACKET_FILTER "gDisablePacketFilter"
#define CFG_DISABLE_PACKET_FILTER_MIN (0)
#define CFG_DISABLE_PACKET_FILTER_MAX (0x1)
#define CFG_DISABLE_PACKET_FILTER_DEFAULT (0)
#define CFG_ENABLE_LTE_COEX "gEnableLTECoex"
#define CFG_ENABLE_LTE_COEX_MIN ( 0 )
#define CFG_ENABLE_LTE_COEX_MAX ( 1 )
#define CFG_ENABLE_LTE_COEX_DEFAULT ( 0 )
#define CFG_AP_KEEP_ALIVE_PERIOD_NAME "gApKeepAlivePeriod"
#define CFG_AP_KEEP_ALIVE_PERIOD_MIN ( 3 )
#define CFG_AP_KEEP_ALIVE_PERIOD_MAX ( 255 )
#define CFG_AP_KEEP_ALIVE_PERIOD_DEFAULT ( 5 )
#define CFG_GO_KEEP_ALIVE_PERIOD_NAME "gGoKeepAlivePeriod"
#define CFG_GO_KEEP_ALIVE_PERIOD_MIN ( 3 )
#define CFG_GO_KEEP_ALIVE_PERIOD_MAX ( 255 )
#define CFG_GO_KEEP_ALIVE_PERIOD_DEFAULT ( 5 )
#define CFG_AP_LINK_MONITOR_PERIOD_NAME "gApLinkMonitorPeriod"
#define CFG_AP_LINK_MONITOR_PERIOD_MIN ( 3 )
#define CFG_AP_LINK_MONITOR_PERIOD_MAX ( 50 )
#define CFG_AP_LINK_MONITOR_PERIOD_DEFAULT ( 10 )
/* gGoLinkMonitorPeriod is period where link is idle and where
* we send NULL frame
*/
#define CFG_GO_LINK_MONITOR_PERIOD_NAME "gGoLinkMonitorPeriod"
#define CFG_GO_LINK_MONITOR_PERIOD_MIN ( 3 )
#define CFG_GO_LINK_MONITOR_PERIOD_MAX ( 50 )
#define CFG_GO_LINK_MONITOR_PERIOD_DEFAULT ( 10 )
#define CFG_BEACON_INTERVAL_NAME "gBeaconInterval"
#define CFG_BEACON_INTERVAL_MIN WNI_CFG_BEACON_INTERVAL_STAMIN
#define CFG_BEACON_INTERVAL_MAX WNI_CFG_BEACON_INTERVAL_STAMAX
#define CFG_BEACON_INTERVAL_DEFAULT WNI_CFG_BEACON_INTERVAL_STADEF
//Additional Handoff related Parameters
#define CFG_ENABLE_IDLE_SCAN_NAME "gEnableIdleScan"
#define CFG_ENABLE_IDLE_SCAN_MIN ( 0 )
#define CFG_ENABLE_IDLE_SCAN_MAX ( 1 )
#define CFG_ENABLE_IDLE_SCAN_DEFAULT ( 1 )
#define CFG_ROAMING_TIME_NAME "gRoamingTime"
#define CFG_ROAMING_TIME_MIN ( 0 )
#define CFG_ROAMING_TIME_MAX ( 4294967UL )
#define CFG_ROAMING_TIME_DEFAULT ( 10 )
#define CFG_VCC_RSSI_TRIGGER_NAME "gVccRssiTrigger"
#define CFG_VCC_RSSI_TRIGGER_MIN ( 0 )
#define CFG_VCC_RSSI_TRIGGER_MAX ( 80 )
#define CFG_VCC_RSSI_TRIGGER_DEFAULT ( 80 )
#define CFG_VCC_UL_MAC_LOSS_THRESH_NAME "gVccUlMacLossThresh"
#define CFG_VCC_UL_MAC_LOSS_THRESH_MIN ( 0 )
#define CFG_VCC_UL_MAC_LOSS_THRESH_MAX ( 9 )
#define CFG_VCC_UL_MAC_LOSS_THRESH_DEFAULT ( 9 )
#define CFG_PASSIVE_MAX_CHANNEL_TIME_NAME "gPassiveMaxChannelTime"
#define CFG_PASSIVE_MAX_CHANNEL_TIME_MIN ( 0 )
#define CFG_PASSIVE_MAX_CHANNEL_TIME_MAX ( 10000 )
#define CFG_PASSIVE_MAX_CHANNEL_TIME_DEFAULT ( 110 )
#define CFG_PASSIVE_MIN_CHANNEL_TIME_NAME "gPassiveMinChannelTime"
#define CFG_PASSIVE_MIN_CHANNEL_TIME_MIN ( 0 )
#define CFG_PASSIVE_MIN_CHANNEL_TIME_MAX ( 10000 )
#define CFG_PASSIVE_MIN_CHANNEL_TIME_DEFAULT ( 60 )
#define CFG_ACTIVE_MAX_CHANNEL_TIME_NAME "gActiveMaxChannelTime"
#define CFG_ACTIVE_MAX_CHANNEL_TIME_MIN ( 0 )
#define CFG_ACTIVE_MAX_CHANNEL_TIME_MAX ( 10000 )
#define CFG_ACTIVE_MAX_CHANNEL_TIME_DEFAULT ( 50 )
#define CFG_ACTIVE_MIN_CHANNEL_TIME_NAME "gActiveMinChannelTime"
#define CFG_ACTIVE_MIN_CHANNEL_TIME_MIN ( 0 )
#define CFG_ACTIVE_MIN_CHANNEL_TIME_MAX ( 10000 )
#define CFG_ACTIVE_MIN_CHANNEL_TIME_DEFAULT ( 30 )
/* Max Dwell time during BTC eSCO call in msec*/
#define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_NAME "gActiveMaxChannelTimeBtc"
#define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_MIN ( 0 )
#define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_MAX ( 10000 )
#define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_DEFAULT ( 120 )
/* Min Dwell time during BTC eSCO call in msec*/
#define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_NAME "gActiveMinChannelTimeBtc"
#define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_MIN ( 0 )
#define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_MAX ( 10000 )
#define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_DEFAULT ( 60 )
/* Min Dwell time during BTC SCO call in msec*/
#define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_SCO_NAME "gActiveMinChannelTimeBtcSCO"
#define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_SCO_MIN (0)
#define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_SCO_MAX (10000)
#define CFG_ACTIVE_MIN_CHANNEL_TIME_BTC_SCO_DEFAULT (20)
/* Max Dwell time during BTC SCO call in msec*/
#define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_SCO_NAME "gActiveMaxChannelTimeBtcSCO"
#define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_SCO_MIN (0)
#define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_SCO_MAX (10000)
#define CFG_ACTIVE_MAX_CHANNEL_TIME_BTC_SCO_DEFAULT (40)
#define CFG_RETRY_LIMIT_ZERO_NAME "gRetryLimitZero"
#define CFG_RETRY_LIMIT_ZERO_MIN ( 0 )
#define CFG_RETRY_LIMIT_ZERO_MAX ( 15 )
#define CFG_RETRY_LIMIT_ZERO_DEFAULT ( 5 )
#define CFG_RETRY_LIMIT_ONE_NAME "gRetryLimitOne"
#define CFG_RETRY_LIMIT_ONE_MIN ( 0 )
#define CFG_RETRY_LIMIT_ONE_MAX ( 15 )
#define CFG_RETRY_LIMIT_ONE_DEFAULT ( 10 )
#define CFG_RETRY_LIMIT_TWO_NAME "gRetryLimitTwo"
#define CFG_RETRY_LIMIT_TWO_MIN ( 0 )
#define CFG_RETRY_LIMIT_TWO_MAX ( 15 )
#define CFG_RETRY_LIMIT_TWO_DEFAULT ( 15 )
#define CFG_DISABLE_AGG_WITH_BTC_NAME "gDisableAggWithBTC"
#define CFG_DISABLE_AGG_WITH_BTC_MIN ( 0 )
#define CFG_DISABLE_AGG_WITH_BTC_MAX ( 1 )
#define CFG_DISABLE_AGG_WITH_BTC_DEFAULT ( 1 )
#ifdef WLAN_AP_STA_CONCURRENCY
#define CFG_PASSIVE_MAX_CHANNEL_TIME_CONC_NAME "gPassiveMaxChannelTimeConc"
#define CFG_PASSIVE_MAX_CHANNEL_TIME_CONC_MIN ( 0 )
#define CFG_PASSIVE_MAX_CHANNEL_TIME_CONC_MAX ( 10000 )
#define CFG_PASSIVE_MAX_CHANNEL_TIME_CONC_DEFAULT ( 110 )
#define CFG_PASSIVE_MIN_CHANNEL_TIME_CONC_NAME "gPassiveMinChannelTimeConc"
#define CFG_PASSIVE_MIN_CHANNEL_TIME_CONC_MIN ( 0 )
#define CFG_PASSIVE_MIN_CHANNEL_TIME_CONC_MAX ( 10000 )
#define CFG_PASSIVE_MIN_CHANNEL_TIME_CONC_DEFAULT ( 60 )
#define CFG_ACTIVE_MAX_CHANNEL_TIME_CONC_NAME "gActiveMaxChannelTimeConc"
#define CFG_ACTIVE_MAX_CHANNEL_TIME_CONC_MIN ( 0 )
#define CFG_ACTIVE_MAX_CHANNEL_TIME_CONC_MAX ( 10000 )
#define CFG_ACTIVE_MAX_CHANNEL_TIME_CONC_DEFAULT ( 40 )
#define CFG_ACTIVE_MIN_CHANNEL_TIME_CONC_NAME "gActiveMinChannelTimeConc"
#define CFG_ACTIVE_MIN_CHANNEL_TIME_CONC_MIN ( 0 )
#define CFG_ACTIVE_MIN_CHANNEL_TIME_CONC_MAX ( 10000 )
#define CFG_ACTIVE_MIN_CHANNEL_TIME_CONC_DEFAULT ( 20 )
#define CFG_REST_TIME_CONC_NAME "gRestTimeConc"
#define CFG_REST_TIME_CONC_MIN ( 0 )
#define CFG_REST_TIME_CONC_MAX ( 10000 )
#define CFG_REST_TIME_CONC_DEFAULT ( 100 )
#define CFG_NUM_STA_CHAN_COMBINED_CONC_NAME "gNumStaChanCombinedConc"
#define CFG_NUM_STA_CHAN_COMBINED_CONC_MIN ( 1 )
#define CFG_NUM_STA_CHAN_COMBINED_CONC_MAX ( 255 )
#define CFG_NUM_STA_CHAN_COMBINED_CONC_DEFAULT ( 3 )
#define CFG_NUM_P2P_CHAN_COMBINED_CONC_NAME "gNumP2PChanCombinedConc"
#define CFG_NUM_P2P_CHAN_COMBINED_CONC_MIN ( 1 )
#define CFG_NUM_P2P_CHAN_COMBINED_CONC_MAX ( 255 )
#define CFG_NUM_P2P_CHAN_COMBINED_CONC_DEFAULT ( 1 )
#endif
#define CFG_MAX_PS_POLL_NAME "gMaxPsPoll"
#define CFG_MAX_PS_POLL_MIN WNI_CFG_MAX_PS_POLL_STAMIN
#define CFG_MAX_PS_POLL_MAX WNI_CFG_MAX_PS_POLL_STAMAX
#define CFG_MAX_PS_POLL_DEFAULT WNI_CFG_MAX_PS_POLL_STADEF
#define CFG_MAX_TX_POWER_NAME "gTxPowerCap"
#define CFG_MAX_TX_POWER_MIN WNI_CFG_CURRENT_TX_POWER_LEVEL_STAMIN
#define CFG_MAX_TX_POWER_MAX WNI_CFG_CURRENT_TX_POWER_LEVEL_STAMAX
//Not to use CFG default because if no registry setting, this is ignored by SME.
#define CFG_MAX_TX_POWER_DEFAULT WNI_CFG_CURRENT_TX_POWER_LEVEL_STAMAX
#define CFG_LOW_GAIN_OVERRIDE_NAME "gLowGainOverride"
#define CFG_LOW_GAIN_OVERRIDE_MIN WNI_CFG_LOW_GAIN_OVERRIDE_STAMIN
#define CFG_LOW_GAIN_OVERRIDE_MAX WNI_CFG_LOW_GAIN_OVERRIDE_STAMAX
#define CFG_LOW_GAIN_OVERRIDE_DEFAULT WNI_CFG_LOW_GAIN_OVERRIDE_STADEF
#define CFG_RSSI_FILTER_PERIOD_NAME "gRssiFilterPeriod"
#define CFG_RSSI_FILTER_PERIOD_MIN WNI_CFG_RSSI_FILTER_PERIOD_STAMIN
#define CFG_RSSI_FILTER_PERIOD_MAX WNI_CFG_RSSI_FILTER_PERIOD_STAMAX
// Increased this value for Non-ESE AP. This is cause FW RSSI Monitoring
// the consumer of this value is ON by default. So to impact power numbers
// we are setting this to a high value.
#define CFG_RSSI_FILTER_PERIOD_DEFAULT WNI_CFG_RSSI_FILTER_PERIOD_STADEF
#define CFG_IGNORE_DTIM_NAME "gIgnoreDtim"
#define CFG_IGNORE_DTIM_MIN WNI_CFG_IGNORE_DTIM_STAMIN
#define CFG_IGNORE_DTIM_MAX WNI_CFG_IGNORE_DTIM_STAMAX
#define CFG_IGNORE_DTIM_DEFAULT WNI_CFG_IGNORE_DTIM_STADEF
#define CFG_MAX_LI_MODULATED_DTIM_NAME "gMaxLIModulatedDTIM"
#define CFG_MAX_LI_MODULATED_DTIM_MIN ( 1 )
#define CFG_MAX_LI_MODULATED_DTIM_MAX ( 10 )
#define CFG_MAX_LI_MODULATED_DTIM_DEFAULT ( 10 )
#define CFG_RX_ANT_CONFIGURATION_NAME "gNumRxAnt"
#define CFG_RX_ANT_CONFIGURATION_NAME_MIN ( 1 )
#define CFG_RX_ANT_CONFIGURATION_NAME_MAX ( 2 )
#define CFG_RX_ANT_CONFIGURATION_NAME_DEFAULT ( 2 )
#define CFG_FW_HEART_BEAT_MONITORING_NAME "gEnableFWHeartBeatMonitoring"
#define CFG_FW_HEART_BEAT_MONITORING_MIN ( 0 )
#define CFG_FW_HEART_BEAT_MONITORING_MAX ( 1 )
#define CFG_FW_HEART_BEAT_MONITORING_DEFAULT ( 1 )
#define CFG_FW_BEACON_FILTERING_NAME "gEnableFWBeaconFiltering"
#define CFG_FW_BEACON_FILTERING_MIN ( 0 )
#define CFG_FW_BEACON_FILTERING_MAX ( 1 )
#define CFG_FW_BEACON_FILTERING_DEFAULT ( 1 )
#define CFG_FW_RSSI_MONITORING_NAME "gEnableFWRssiMonitoring"
#define CFG_FW_RSSI_MONITORING_MIN ( 0 )
#define CFG_FW_RSSI_MONITORING_MAX ( 1 )
#define CFG_FW_RSSI_MONITORING_DEFAULT ( 1 )
#define CFG_DATA_INACTIVITY_TIMEOUT_NAME "gDataInactivityTimeout"
#define CFG_DATA_INACTIVITY_TIMEOUT_MIN ( 1 )
#define CFG_DATA_INACTIVITY_TIMEOUT_MAX ( 255 )
#define CFG_DATA_INACTIVITY_TIMEOUT_DEFAULT ( 20 )
#define CFG_NTH_BEACON_FILTER_NAME "gNthBeaconFilter"
#define CFG_NTH_BEACON_FILTER_MIN ( WNI_CFG_NTH_BEACON_FILTER_STAMIN )
#define CFG_NTH_BEACON_FILTER_MAX ( WNI_CFG_NTH_BEACON_FILTER_STAMAX )
#define CFG_NTH_BEACON_FILTER_DEFAULT ( WNI_CFG_NTH_BEACON_FILTER_STADEF )
#define CFG_RF_SETTLING_TIME_CLK_NAME "rfSettlingTimeUs"
#define CFG_RF_SETTLING_TIME_CLK_MIN ( 0 )
#define CFG_RF_SETTLING_TIME_CLK_MAX ( 60000 )
#define CFG_RF_SETTLING_TIME_CLK_DEFAULT ( 1500 )
#define CFG_INFRA_STA_KEEP_ALIVE_PERIOD_NAME "gStaKeepAlivePeriod"
#define CFG_INFRA_STA_KEEP_ALIVE_PERIOD_MIN ( 0 )
#define CFG_INFRA_STA_KEEP_ALIVE_PERIOD_MAX ( 65535)
#define CFG_INFRA_STA_KEEP_ALIVE_PERIOD_DEFAULT ( 30 )
//WMM configuration
#define CFG_QOS_WMM_MODE_NAME "WmmIsEnabled"
#define CFG_QOS_WMM_MODE_MIN (0)
#define CFG_QOS_WMM_MODE_MAX (2) //HDD_WMM_NO_QOS
#define CFG_QOS_WMM_MODE_DEFAULT (0) //HDD_WMM_AUTO
#define CFG_QOS_WMM_80211E_ENABLED_NAME "80211eIsEnabled"
#define CFG_QOS_WMM_80211E_ENABLED_MIN (0)
#define CFG_QOS_WMM_80211E_ENABLED_MAX (1)
#define CFG_QOS_WMM_80211E_ENABLED_DEFAULT (0)
#define CFG_QOS_WMM_UAPSD_MASK_NAME "UapsdMask" // ACs to setup U-APSD for at assoc
#define CFG_QOS_WMM_UAPSD_MASK_MIN (0x00)
#define CFG_QOS_WMM_UAPSD_MASK_MAX (0xFF)
#define CFG_QOS_WMM_UAPSD_MASK_DEFAULT (0xaa)
#define CFG_QOS_WMM_UAPSD_MASK_DYMANIC_WMM_PS_DEFAULT (0x0)
#define CFG_QOS_WMM_UAPSD_MASK_LEGACY_WMM_PS_DEFAULT (0x0)
#define CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_NAME "InfraUapsdVoSrvIntv"
#define CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_MIN (0)
#define CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_MAX (4294967295UL )
#define CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_DEFAULT (20)
#define CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_NAME "InfraUapsdVoSuspIntv"
#define CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_MIN (0)
#define CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_MAX (4294967295UL )
#define CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_DEFAULT (2000)
#define CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_NAME "InfraUapsdViSrvIntv"
#define CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_MIN (0)
#define CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_MAX (4294967295UL)
#define CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_DEFAULT (300)
#define CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_NAME "InfraUapsdViSuspIntv"
#define CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_MIN (0)
#define CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_MAX (4294967295UL)
#define CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_DEFAULT (2000)
#define CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_NAME "InfraUapsdBeSrvIntv"
#define CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_MIN (0)
#define CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_MAX (4294967295UL)
#define CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_DEFAULT (300)
#define CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_NAME "InfraUapsdBeSuspIntv"
#define CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_MIN (0)
#define CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_MAX (4294967295UL)
#define CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_DEFAULT (2000)
#define CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_NAME "InfraUapsdBkSrvIntv"
#define CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_MIN (0)
#define CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_MAX (4294967295UL)
#define CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_DEFAULT (300)
#define CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_NAME "InfraUapsdBkSuspIntv"
#define CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_MIN (0)
#define CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_MAX (4294967295UL)
#define CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_DEFAULT (2000)
#ifdef FEATURE_WLAN_ESE
#define CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_NAME "InfraInactivityInterval"
#define CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_MIN (0)
#define CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_MAX (4294967295UL)
#define CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_DEFAULT (0) //disabled
#define CFG_ESE_FEATURE_ENABLED_NAME "EseEnabled"
#define CFG_ESE_FEATURE_ENABLED_MIN (0)
#define CFG_ESE_FEATURE_ENABLED_MAX (1)
#define CFG_ESE_FEATURE_ENABLED_DEFAULT (0) //disabled
#endif // FEATURE_WLAN_ESE
#ifdef FEATURE_WLAN_LFR
#define CFG_LFR_FEATURE_ENABLED_NAME "FastRoamEnabled"
#define CFG_LFR_FEATURE_ENABLED_MIN (0)
#define CFG_LFR_FEATURE_ENABLED_MAX (1)
#define CFG_LFR_FEATURE_ENABLED_DEFAULT (0) //disabled
#define CFG_LFR_MAWC_FEATURE_ENABLED_NAME "MAWCEnabled"
#define CFG_LFR_MAWC_FEATURE_ENABLED_MIN (0)
#define CFG_LFR_MAWC_FEATURE_ENABLED_MAX (1)
#define CFG_LFR_MAWC_FEATURE_ENABLED_DEFAULT (0) /* disabled */
#endif // FEATURE_WLAN_LFR
#if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR)
// This flag will control fasttransition in case of 11r and ESE.
// Basically with this the whole neighbor roam, pre-auth, reassoc
// can be turned ON/OFF.
// With this turned OFF 11r will completely not work.
// For 11r this flag has to be ON.
// For ESE fastroam will not work.
#define CFG_FAST_TRANSITION_ENABLED_NAME "FastTransitionEnabled"
#define CFG_FAST_TRANSITION_ENABLED_NAME_MIN (0)
#define CFG_FAST_TRANSITION_ENABLED_NAME_MAX (1)
#define CFG_FAST_TRANSITION_ENABLED_NAME_DEFAULT (1) //Enabled
/* This parameter is used to decide whether to Roam or not.
* AP1 is the currently associated AP and AP2 is chosen for roaming.
* The Roaming will happen only if AP2 has better Signal Quality and it has a RSSI better than AP1
* in terms of RoamRssiDiff,and RoamRssiDiff is the number of units (typically measured in dB) AP2
* is better than AP1.
* This check is not done if the value is Zero */
#define CFG_ROAM_RSSI_DIFF_NAME "RoamRssiDiff"
#define CFG_ROAM_RSSI_DIFF_MIN (0)
#define CFG_ROAM_RSSI_DIFF_MAX (30)
#define CFG_ROAM_RSSI_DIFF_DEFAULT (5)
/*
* Following a scan and if potential roam candidate(s) are found,
* then determine whether to register for reassoc threshold or roam
* immediately based on this configuration parameter. If the RSSI
* of any available candidate is better than the currently associated
* AP by at least gImmediateRoamRssiDiff, then being to roam
* immediately.
* NOTE: Value of 0 means that immediate roaming is enabled by default
*/
#define CFG_IMMEDIATE_ROAM_RSSI_DIFF_NAME "gImmediateRoamRssiDiff"
#define CFG_IMMEDIATE_ROAM_RSSI_DIFF_MIN (0)
#define CFG_IMMEDIATE_ROAM_RSSI_DIFF_MAX (125)
#define CFG_IMMEDIATE_ROAM_RSSI_DIFF_DEFAULT (0)
/*This parameter is used to set Wireless Extended Security Mode.*/
#define CFG_ENABLE_WES_MODE_NAME "gWESModeEnabled"
#define CFG_ENABLE_WES_MODE_NAME_MIN (0)
#define CFG_ENABLE_WES_MODE_NAME_MAX (1)
#define CFG_ENABLE_WES_MODE_NAME_DEFAULT (0)
#define CFG_ROAM_SCAN_N_PROBES "gRoamScanNProbes"
#define CFG_ROAM_SCAN_N_PROBES_MIN (1)
#define CFG_ROAM_SCAN_N_PROBES_MAX (10)
#define CFG_ROAM_SCAN_N_PROBES_DEFAULT (2)
#define CFG_ROAM_SCAN_HOME_AWAY_TIME "gRoamScanHomeAwayTime"
#define CFG_ROAM_SCAN_HOME_AWAY_TIME_MIN (3)
#define CFG_ROAM_SCAN_HOME_AWAY_TIME_MAX (300)
#define CFG_ROAM_SCAN_HOME_AWAY_TIME_DEFAULT (CFG_ROAM_SCAN_HOME_AWAY_TIME_MIN)
#endif /* (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR) */
#ifdef FEATURE_WLAN_OKC
#define CFG_OKC_FEATURE_ENABLED_NAME "OkcEnabled"
#define CFG_OKC_FEATURE_ENABLED_MIN (0)
#define CFG_OKC_FEATURE_ENABLED_MAX (1)
#define CFG_OKC_FEATURE_ENABLED_DEFAULT (1)
#endif
#ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD
#define CFG_ROAM_SCAN_OFFLOAD_ENABLED "gRoamScanOffloadEnabled"
#define CFG_ROAM_SCAN_OFFLOAD_ENABLED_MIN (0)
#define CFG_ROAM_SCAN_OFFLOAD_ENABLED_MAX (1)
#define CFG_ROAM_SCAN_OFFLOAD_ENABLED_DEFAULT (1)
/* Enable/disable PER based roaming */
#define CFG_PER_ROAM_SCAN_OFFLOAD_ENABLED "gPERRoamEnable"
#define CFG_PER_ROAM_SCAN_OFFLOAD_ENABLED_MIN (0)
#define CFG_PER_ROAM_SCAN_OFFLOAD_ENABLED_MAX (1)
#define CFG_PER_ROAM_SCAN_OFFLOAD_ENABLED_DEFAULT (0)
/*
* Rate at which to stop monitoring data rates for PER based Roam
* Value: MBPS * 10
* Min: Minimum rate of data transfer
* Max: Max rate for 1x1 transmission
*/
#define CFG_PER_ROAM_SCAN_RATE_UP_THRESHOLD "gPERRoamUpThresholdRate"
#define CFG_PER_ROAM_SCAN_RATE_UP_THRESHOLD_MIN (20)
#define CFG_PER_ROAM_SCAN_RATE_UP_THRESHOLD_MAX (3330)
#define CFG_PER_ROAM_SCAN_RATE_UP_THRESHOLD_DEFAULT (400)
/*
* rate at which to start monitoring data rates for PER based roam
* Value: MBPS * 10
*/
#define CFG_PER_ROAM_SCAN_RATE_DOWN_THRESHOLD "gPERRoamDownThresholdRate"
#define CFG_PER_ROAM_SCAN_RATE_DOWN_THRESHOLD_MIN (10)
#define CFG_PER_ROAM_SCAN_RATE_DOWN_THRESHOLD_MAX (3330)
#define CFG_PER_ROAM_SCAN_RATE_DOWN_THRESHOLD_DEFAULT (200)
/*
* time to wait before start monitoring again once a roam scan has been
* triggered. (Minimum time difference between two scans)
* Value : seconds
*/
#define CFG_PER_ROAM_SCAN_WAIT_TIME "gPERRoamScanInterval"
#define CFG_PER_ROAM_SCAN_WAIT_TIME_MIN (10)
#define CFG_PER_ROAM_SCAN_WAIT_TIME_MAX (3600)
#define CFG_PER_ROAM_SCAN_WAIT_TIME_DEFAULT (300)
/* Time to collect stats to trigger roam scan for Tx path */
#define CFG_PER_ROAM_SCAN_PER_TIME_THRESHOLD "gPERRoamStatsTime"
#define CFG_PER_ROAM_SCAN_PER_TIME_THRESHOLD_MIN (5)
#define CFG_PER_ROAM_SCAN_PER_TIME_THRESHOLD_MAX (25)
#define CFG_PER_ROAM_SCAN_PER_TIME_THRESHOLD_DEFAULT (10)
/* Rx monitoring is enabled to trigger a PER based roam scan */
#define CFG_PER_ROAM_SCAN_RX_MONITOR_ENABLED "gPERRoamRxMonitorEnable"
#define CFG_PER_ROAM_SCAN_RX_MONITOR_ENABLED_MIN (0)
#define CFG_PER_ROAM_SCAN_RX_MONITOR_ENABLED_MAX (1)
#define CFG_PER_ROAM_SCAN_RX_MONITOR_ENABLED_DEFAULT (1)
/*
* Minimum number of packets required to consider if PER based roam scan
* needs to be triggered in Rx
*/
#define CFG_PER_ROAM_SCAN_RX_MIN_PACKETS "gPERRoamRxPktThreshold"
#define CFG_PER_ROAM_SCAN_RX_MIN_PACKETS_MIN (10)
#define CFG_PER_ROAM_SCAN_RX_MIN_PACKETS_MAX (10000)
#define CFG_PER_ROAM_SCAN_RX_MIN_PACKETS_DEFAULT (50)
/*
* Minimum percentage of packets needs to be below gPERRoamScanRateDownThreshold
* to trigger a roam scan
*/
#define CFG_PER_ROAM_SCAN_MIN_PERCENTAGE "gPERRoamTriggerPercent"
#define CFG_PER_ROAM_SCAN_MIN_PERCENTAGE_MIN (20)
#define CFG_PER_ROAM_SCAN_MIN_PERCENTAGE_MAX (100)
#define CFG_PER_ROAM_SCAN_MIN_PERCENTAGE_DEFAULT (60)
/* Channel sensing is enabled/disabled for PER based roam scan */
#define CFG_PER_ROAM_SCAN_CCA_ENABLED "gPERRoamCCAEnabled"
#define CFG_PER_ROAM_SCAN_CCA_ENABLED_MIN (0)
#define CFG_PER_ROAM_SCAN_CCA_ENABLED_MAX (1)
#define CFG_PER_ROAM_SCAN_CCA_ENABLED_DEFAULT (0)
#define CFG_PER_ROAM_FULL_SCAN_RSSI_THRESHOLD "gPERRoamFullScanRssiDiffThreshold"
#define CFG_PER_ROAM_FULL_SCAN_RSSI_THRESHOLD_MIN (5)
#define CFG_PER_ROAM_FULL_SCAN_RSSI_THRESHOLD_MAX (50)
#define CFG_PER_ROAM_FULL_SCAN_RSSI_THRESHOLD_DEFAULT (10)
/*
* Minimum RSSI value below which candidate will not be eligible for roam
*/
#define CFG_PER_ROAM_BAD_RSSI "gPERMinRssiThresholdForRoam"
#define CFG_PER_ROAM_BAD_RSSI_MIN (-100)
#define CFG_PER_ROAM_BAD_RSSI_MAX (-40)
#define CFG_PER_ROAM_BAD_RSSI_DEFAULT (-80)
#endif
#define CFG_QOS_WMM_PKT_CLASSIFY_BASIS_NAME "PktClassificationBasis" // DSCP or 802.1Q
#define CFG_QOS_WMM_PKT_CLASSIFY_BASIS_MIN (0)
#define CFG_QOS_WMM_PKT_CLASSIFY_BASIS_MAX (1)
#define CFG_QOS_WMM_PKT_CLASSIFY_BASIS_DEFAULT (0) //DSCP
/* default TSPEC parameters for AC_VO */
#define CFG_QOS_WMM_INFRA_DIR_AC_VO_NAME "InfraDirAcVo"
#define CFG_QOS_WMM_INFRA_DIR_AC_VO_MIN (0)
#define CFG_QOS_WMM_INFRA_DIR_AC_VO_MAX (3)
#define CFG_QOS_WMM_INFRA_DIR_AC_VO_DEFAULT (3) //WLAN_QCT_CUST_WMM_TSDIR_BOTH
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_NAME "InfraNomMsduSizeAcVo"
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_MIN (0x0)
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_MAX (0xFFFF)
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_DEFAULT (0x80D0)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_NAME "InfraMeanDataRateAcVo"
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_MIN (0x0)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_MAX (0xFFFFFFFF)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_DEFAULT (0x14500)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_NAME "InfraMinPhyRateAcVo"
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_MIN (0x0)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_MAX (0xFFFFFFFF)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_DEFAULT (0x5B8D80)
#define CFG_QOS_WMM_INFRA_SBA_AC_VO_NAME "InfraSbaAcVo"
#define CFG_QOS_WMM_INFRA_SBA_AC_VO_MIN (0x2001)
#define CFG_QOS_WMM_INFRA_SBA_AC_VO_MAX (0xFFFF)
#define CFG_QOS_WMM_INFRA_SBA_AC_VO_DEFAULT (0x2001)
/* default TSPEC parameters for AC_VI */
#define CFG_QOS_WMM_INFRA_DIR_AC_VI_NAME "InfraDirAcVi"
#define CFG_QOS_WMM_INFRA_DIR_AC_VI_MIN (0)
#define CFG_QOS_WMM_INFRA_DIR_AC_VI_MAX (3)
#define CFG_QOS_WMM_INFRA_DIR_AC_VI_DEFAULT (3) //WLAN_QCT_CUST_WMM_TSDIR_BOTH
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_NAME "InfraNomMsduSizeAcVi"
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_MIN (0x0)
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_MAX (0xFFFF)
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_DEFAULT (0x85DC)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_NAME "InfraMeanDataRateAcVi"
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_MIN (0x0)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_MAX (0xFFFFFFFF)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_DEFAULT (0x57E40)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_NAME "InfraMinPhyRateAcVi"
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_MIN (0x0)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_MAX (0xFFFFFFFF)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_DEFAULT (0x5B8D80)
#define CFG_QOS_WMM_INFRA_SBA_AC_VI_NAME "InfraSbaAcVi"
#define CFG_QOS_WMM_INFRA_SBA_AC_VI_MIN (0x2001)
#define CFG_QOS_WMM_INFRA_SBA_AC_VI_MAX (0xFFFF)
#define CFG_QOS_WMM_INFRA_SBA_AC_VI_DEFAULT (0x2001)
/* default TSPEC parameters for AC_BE*/
#define CFG_QOS_WMM_INFRA_DIR_AC_BE_NAME "InfraDirAcBe"
#define CFG_QOS_WMM_INFRA_DIR_AC_BE_MIN (0)
#define CFG_QOS_WMM_INFRA_DIR_AC_BE_MAX (3)
#define CFG_QOS_WMM_INFRA_DIR_AC_BE_DEFAULT (3) //WLAN_QCT_CUST_WMM_TSDIR_BOTH
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_NAME "InfraNomMsduSizeAcBe"
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_MIN (0x0)
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_MAX (0xFFFF)
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_DEFAULT (0x85DC)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_NAME "InfraMeanDataRateAcBe"
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_MIN (0x0)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_MAX (0xFFFFFFFF)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_DEFAULT (0x493E0)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_NAME "InfraMinPhyRateAcBe"
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_MIN (0x0)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_MAX (0xFFFFFFFF)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_DEFAULT (0x5B8D80)
#define CFG_QOS_WMM_INFRA_SBA_AC_BE_NAME "InfraSbaAcBe"
#define CFG_QOS_WMM_INFRA_SBA_AC_BE_MIN (0x2001)
#define CFG_QOS_WMM_INFRA_SBA_AC_BE_MAX (0xFFFF)
#define CFG_QOS_WMM_INFRA_SBA_AC_BE_DEFAULT (0x2001)
/* default TSPEC parameters for AC_Bk*/
#define CFG_QOS_WMM_INFRA_DIR_AC_BK_NAME "InfraDirAcBk"
#define CFG_QOS_WMM_INFRA_DIR_AC_BK_MIN (0)
#define CFG_QOS_WMM_INFRA_DIR_AC_BK_MAX (3)
#define CFG_QOS_WMM_INFRA_DIR_AC_BK_DEFAULT (3) //WLAN_QCT_CUST_WMM_TSDIR_BOTH
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_NAME "InfraNomMsduSizeAcBk"
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_MIN (0x0)
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_MAX (0xFFFF)
#define CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_DEFAULT (0x85DC)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_NAME "InfraMeanDataRateAcBk"
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_MIN (0x0)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_MAX (0xFFFFFFFF)
#define CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_DEFAULT (0x493E0)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_NAME "InfraMinPhyRateAcBk"
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_MIN (0x0)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_MAX (0xFFFFFFFF)
#define CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_DEFAULT (0x5B8D80)
#define CFG_QOS_WMM_INFRA_SBA_AC_BK_NAME "InfraSbaAcBk"
#define CFG_QOS_WMM_INFRA_SBA_AC_BK_MIN (0x2001)
#define CFG_QOS_WMM_INFRA_SBA_AC_BK_MAX (0xFFFF)
#define CFG_QOS_WMM_INFRA_SBA_AC_BK_DEFAULT (0x2001)
// TL configuration
#define CFG_TL_WFQ_BK_WEIGHT_NAME "WfqBkWeight"
#define CFG_TL_WFQ_BK_WEIGHT_MIN 1
#define CFG_TL_WFQ_BK_WEIGHT_MAX 0xFF
#define CFG_TL_WFQ_BK_WEIGHT_DEFAULT 1
#define CFG_TL_WFQ_BE_WEIGHT_NAME "WfqBeWeight"
#define CFG_TL_WFQ_BE_WEIGHT_MIN 1
#define CFG_TL_WFQ_BE_WEIGHT_MAX 0xFF
#define CFG_TL_WFQ_BE_WEIGHT_DEFAULT 3
#define CFG_TL_WFQ_VI_WEIGHT_NAME "WfqViWeight"
#define CFG_TL_WFQ_VI_WEIGHT_MIN 1
#define CFG_TL_WFQ_VI_WEIGHT_MAX 0xFF
#define CFG_TL_WFQ_VI_WEIGHT_DEFAULT 7
#define CFG_TL_WFQ_VO_WEIGHT_NAME "WfqVoWeight"
#define CFG_TL_WFQ_VO_WEIGHT_MIN 1
#define CFG_TL_WFQ_VO_WEIGHT_MAX 0xFF
#define CFG_TL_WFQ_VO_WEIGHT_DEFAULT 7
#define CFG_TL_DELAYED_TRGR_FRM_INT_NAME "DelayedTriggerFrmInt"
#define CFG_TL_DELAYED_TRGR_FRM_INT_MIN 1
#define CFG_TL_DELAYED_TRGR_FRM_INT_MAX (4294967295UL)
#define CFG_TL_DELAYED_TRGR_FRM_INT_DEFAULT 3000
#define CFG_REORDER_TIME_BK_NAME "BkReorderTime"
#define CFG_REORDER_TIME_BK_MIN 30
#define CFG_REORDER_TIME_BK_MAX 1000
#define CFG_REORDER_TIME_BK_DEFAULT 100
#define CFG_REORDER_TIME_BE_NAME "BeReorderTime"
#define CFG_REORDER_TIME_BE_MIN 30
#define CFG_REORDER_TIME_BE_MAX 1000
#define CFG_REORDER_TIME_BE_DEFAULT 100
#define CFG_REORDER_TIME_VI_NAME "ViReorderTime"
#define CFG_REORDER_TIME_VI_MIN 30
#define CFG_REORDER_TIME_VI_MAX 1000
#define CFG_REORDER_TIME_VI_DEFAULT 100
#define CFG_REORDER_TIME_VO_NAME "VoReorderTime"
#define CFG_REORDER_TIME_VO_MIN 30
#define CFG_REORDER_TIME_VO_MAX 1000
#define CFG_REORDER_TIME_VO_DEFAULT 40
#define CFG_ENABLE_PN_REPLAY_NAME "PNreplayCheck"
#define CFG_ENABLE_PN_REPLAY_MIN 0
#define CFG_ENABLE_PN_REPLAY_MAX 1
#define CFG_ENABLE_PN_REPLAY_DEFAULT 0
#if defined WLAN_FEATURE_VOWIFI
#define CFG_RRM_ENABLE_NAME "gRrmEnable"
#define CFG_RRM_ENABLE_MIN (0)
#define CFG_RRM_ENABLE_MAX (1)
#define CFG_RRM_ENABLE_DEFAULT (0)
#define CFG_RRM_OPERATING_CHAN_MAX_DURATION_NAME "gRrmOperChanMax" //section 11.10.3 IEEE std. 802.11k-2008
#define CFG_RRM_OPERATING_CHAN_MAX_DURATION_MIN (0) //Maxduration = 2^(maxDuration - 4) * bcnIntvl.
#define CFG_RRM_OPERATING_CHAN_MAX_DURATION_MAX (8)
#define CFG_RRM_OPERATING_CHAN_MAX_DURATION_DEFAULT (3) //max duration = 2^-1 * bcnIntvl (50% of bcn intvl)
#define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_NAME "gRrmNonOperChanMax" //Same as above.
#define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_MIN (0)
#define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_MAX (8)
#define CFG_RRM_NON_OPERATING_CHAN_MAX_DURATION_DEFAULT (3)
#define CFG_RRM_MEAS_RANDOMIZATION_INTVL_NAME "gRrmRandnIntvl"
#define CFG_RRM_MEAS_RANDOMIZATION_INTVL_MIN (10)
#define CFG_RRM_MEAS_RANDOMIZATION_INTVL_MAX (100)
#define CFG_RRM_MEAS_RANDOMIZATION_INTVL_DEFAULT (100)
#endif
#define CFG_QOS_IMPLICIT_SETUP_ENABLED_NAME "ImplicitQosIsEnabled"
#define CFG_QOS_IMPLICIT_SETUP_ENABLED_MIN (0)
#define CFG_QOS_IMPLICIT_SETUP_ENABLED_MAX (1)
#define CFG_QOS_IMPLICIT_SETUP_ENABLED_DEFAULT (1)
#define CFG_ENABLE_LOGP_NAME "gEnableLogp"
#define CFG_ENABLE_LOGP_MIN ( 0 )
#define CFG_ENABLE_LOGP_MAX ( 1 )
#define CFG_ENABLE_LOGP_DEFAULT ( 1 )
#define CFG_BTC_EXECUTION_MODE_NAME "BtcExecutionMode"
#define CFG_BTC_EXECUTION_MODE_MIN ( 0 )
#define CFG_BTC_EXECUTION_MODE_MAX ( 5 )
#define CFG_BTC_EXECUTION_MODE_DEFAULT ( 0 )
#define CFG_BTC_DHCP_PROTECTION_NAME "BtcConsBtSlotToBlockDuringDhcp"
#define CFG_BTC_DHCP_PROTECTION_MIN ( 0 )
#define CFG_BTC_DHCP_PROTECTION_MAX ( 0xFF )
#define CFG_BTC_DHCP_PROTECTION_DEFAULT ( 0 )
#define CFG_BTC_A2DP_DHCP_PROTECTION_NAME "BtcA2DPDhcpProtectLevel"
#define CFG_BTC_A2DP_DHCP_PROTECTION_MIN ( 0 )
#define CFG_BTC_A2DP_DHCP_PROTECTION_MAX ( 0xFF )
#define CFG_BTC_A2DP_DHCP_PROTECTION_DEFAULT ( 7 )
#define CFG_BTC_STATIC_LEN_INQ_BT_NAME "btcStaticLenInqBt"
#define CFG_BTC_STATIC_LEN_INQ_BT_MIN ( 5000 )
#define CFG_BTC_STATIC_LEN_INQ_BT_MAX ( 500000 )
#define CFG_BTC_STATIC_LEN_INQ_BT_DEFAULT ( 120000 )
#define CFG_BTC_STATIC_LEN_PAGE_BT_NAME "btcStaticLenPageBt"
#define CFG_BTC_STATIC_LEN_PAGE_BT_MIN ( 5000 )
#define CFG_BTC_STATIC_LEN_PAGE_BT_MAX ( 500000 )
#define CFG_BTC_STATIC_LEN_PAGE_BT_DEFAULT ( 120000 )
#define CFG_BTC_STATIC_LEN_CONN_BT_NAME "btcStaticLenConnBt"
#define CFG_BTC_STATIC_LEN_CONN_BT_MIN ( 5000 )
#define CFG_BTC_STATIC_LEN_CONN_BT_MAX ( 500000 )
#define CFG_BTC_STATIC_LEN_CONN_BT_DEFAULT ( 120000 )
#define CFG_BTC_STATIC_LEN_LE_BT_NAME "btcStaticLenLeBt"
#define CFG_BTC_STATIC_LEN_LE_BT_MIN ( 5000 )
#define CFG_BTC_STATIC_LEN_LE_BT_MAX ( 500000 )
#define CFG_BTC_STATIC_LEN_LE_BT_DEFAULT ( 120000 )
#define CFG_BTC_STATIC_LEN_INQ_WLAN_NAME "btcStaticLenInqWlan"
#define CFG_BTC_STATIC_LEN_INQ_WLAN_MIN ( 0 )
#define CFG_BTC_STATIC_LEN_INQ_WLAN_MAX ( 500000 )
#define CFG_BTC_STATIC_LEN_INQ_WLAN_DEFAULT ( 30000 )
#define CFG_BTC_STATIC_LEN_PAGE_WLAN_NAME "btcStaticLenPageWlan"
#define CFG_BTC_STATIC_LEN_PAGE_WLAN_MIN ( 0 )
#define CFG_BTC_STATIC_LEN_PAGE_WLAN_MAX ( 500000 )
#define CFG_BTC_STATIC_LEN_PAGE_WLAN_DEFAULT ( 30000 )
#define CFG_BTC_STATIC_LEN_CONN_WLAN_NAME "btcStaticLenConnWlan"
#define CFG_BTC_STATIC_LEN_CONN_WLAN_MIN ( 0 )
#define CFG_BTC_STATIC_LEN_CONN_WLAN_MAX ( 500000 )
#define CFG_BTC_STATIC_LEN_CONN_WLAN_DEFAULT ( 30000 )
#define CFG_BTC_STATIC_LEN_LE_WLAN_NAME "btcStaticLenLeWlan"
#define CFG_BTC_STATIC_LEN_LE_WLAN_MIN ( 0 )
#define CFG_BTC_STATIC_LEN_LE_WLAN_MAX ( 500000 )
#define CFG_BTC_STATIC_LEN_LE_WLAN_DEFAULT ( 30000 )
#define CFG_BTC_DYN_MAX_LEN_BT_NAME "btcDynMaxLenBt"
#define CFG_BTC_DYN_MAX_LEN_BT_MIN ( 25000 )
#define CFG_BTC_DYN_MAX_LEN_BT_MAX ( 500000 )
#define CFG_BTC_DYN_MAX_LEN_BT_DEFAULT ( 250000 )
#define CFG_BTC_DYN_MAX_LEN_WLAN_NAME "btcDynMaxLenWlan"
#define CFG_BTC_DYN_MAX_LEN_WLAN_MIN ( 15000 )
#define CFG_BTC_DYN_MAX_LEN_WLAN_MAX ( 500000 )
#define CFG_BTC_DYN_MAX_LEN_WLAN_DEFAULT ( 45000 )
#define CFG_BTC_MAX_SCO_BLOCK_PERC_NAME "btcMaxScoBlockPerc"
#define CFG_BTC_MAX_SCO_BLOCK_PERC_MIN ( 0 )
#define CFG_BTC_MAX_SCO_BLOCK_PERC_MAX ( 100 )
#define CFG_BTC_MAX_SCO_BLOCK_PERC_DEFAULT ( 1 )
#define CFG_BTC_DHCP_PROT_ON_A2DP_NAME "btcDhcpProtOnA2dp"
#define CFG_BTC_DHCP_PROT_ON_A2DP_MIN ( 0 )
#define CFG_BTC_DHCP_PROT_ON_A2DP_MAX ( 1 )
#define CFG_BTC_DHCP_PROT_ON_A2DP_DEFAULT ( 1 )
#define CFG_BTC_DHCP_PROT_ON_SCO_NAME "btcDhcpProtOnSco"
#define CFG_BTC_DHCP_PROT_ON_SCO_MIN ( 0 )
#define CFG_BTC_DHCP_PROT_ON_SCO_MAX ( 1 )
#define CFG_BTC_DHCP_PROT_ON_SCO_DEFAULT ( 0 )
#define CFG_MWS_COEX_V1_WAN_FREQ_NAME "mwsCoexVictim1WANFreq"
#define CFG_MWS_COEX_VX_WAN_FREQ_MIN ( 0 )
#define CFG_MWS_COEX_VX_WAN_FREQ_MAX ( 0xFFFFFFFF )
#define CFG_MWS_COEX_VX_WAN_FREQ_DEFAULT ( 0 )
#define CFG_MWS_COEX_V1_WLAN_FREQ_NAME "mwsCoexVictim1WLANFreq"
#define CFG_MWS_COEX_VX_WLAN_FREQ_MIN ( 0 )
#define CFG_MWS_COEX_VX_WLAN_FREQ_MAX ( 0xFFFFFFFF )
#define CFG_MWS_COEX_VX_WLAN_FREQ_DEFAULT ( 0 )
#define CFG_MWS_COEX_V1_CONFIG_NAME "mwsCoexVictim1Config"
#define CFG_MWS_COEX_V1_CONFIG2_NAME "mwsCoexVictim1Config2"
#define CFG_MWS_COEX_VX_CONFIG_MIN ( 0 )
#define CFG_MWS_COEX_VX_CONFIG_MAX ( 0xFFFFFFFF )
#define CFG_MWS_COEX_VX_CONFIG_DEFAULT ( 0 )
#define CFG_MWS_COEX_V2_WAN_FREQ_NAME "mwsCoexVictim2WANFreq"
#define CFG_MWS_COEX_V2_WLAN_FREQ_NAME "mwsCoexVictim2WLANFreq"
#define CFG_MWS_COEX_V2_CONFIG_NAME "mwsCoexVictim2Config"
#define CFG_MWS_COEX_V2_CONFIG2_NAME "mwsCoexVictim2Config2"
#define CFG_MWS_COEX_V3_WAN_FREQ_NAME "mwsCoexVictim3WANFreq"
#define CFG_MWS_COEX_V3_WLAN_FREQ_NAME "mwsCoexVictim3WLANFreq"
#define CFG_MWS_COEX_V3_CONFIG_NAME "mwsCoexVictim3Config"
#define CFG_MWS_COEX_V3_CONFIG2_NAME "mwsCoexVictim3Config2"
#define CFG_MWS_COEX_V4_WAN_FREQ_NAME "mwsCoexVictim4WANFreq"
#define CFG_MWS_COEX_V4_WLAN_FREQ_NAME "mwsCoexVictim4WLANFreq"
#define CFG_MWS_COEX_V4_CONFIG_NAME "mwsCoexVictim4Config"
#define CFG_MWS_COEX_V4_CONFIG2_NAME "mwsCoexVictim4Config2"
#define CFG_MWS_COEX_V5_WAN_FREQ_NAME "mwsCoexVictim5WANFreq"
#define CFG_MWS_COEX_V5_WLAN_FREQ_NAME "mwsCoexVictim5WLANFreq"
#define CFG_MWS_COEX_V5_CONFIG_NAME "mwsCoexVictim5Config"
#define CFG_MWS_COEX_V5_CONFIG2_NAME "mwsCoexVictim5Config2"
#define CFG_MWS_COEX_V6_WAN_FREQ_NAME "mwsCoexVictim6WANFreq"
#define CFG_MWS_COEX_V6_WLAN_FREQ_NAME "mwsCoexVictim6WLANFreq"
#define CFG_MWS_COEX_V6_CONFIG_NAME "mwsCoexVictim6Config"
#define CFG_MWS_COEX_V6_CONFIG2_NAME "mwsCoexVictim6Config2"
#define CFG_MWS_COEX_V7_WAN_FREQ_NAME "mwsCoexVictim7WANFreq"
#define CFG_MWS_COEX_V7_WLAN_FREQ_NAME "mwsCoexVictim7WLANFreq"
#define CFG_MWS_COEX_V7_CONFIG_NAME "mwsCoexVictim7Config"
#define CFG_MWS_COEX_V7_CONFIG2_NAME "mwsCoexVictim7Config2"
#define CFG_MWS_COEX_V8_WAN_FREQ_NAME "mwsCoexVictim8WANFreq"
#define CFG_MWS_COEX_V8_WLAN_FREQ_NAME "mwsCoexVictim8WLANFreq"
#define CFG_MWS_COEX_V8_CONFIG_NAME "mwsCoexVictim8Config"
#define CFG_MWS_COEX_V8_CONFIG2_NAME "mwsCoexVictim8Config2"
#define CFG_MWS_COEX_V9_WAN_FREQ_NAME "mwsCoexVictim9WANFreq"
#define CFG_MWS_COEX_V9_WLAN_FREQ_NAME "mwsCoexVictim9WLANFreq"
#define CFG_MWS_COEX_V9_CONFIG_NAME "mwsCoexVictim9Config"
#define CFG_MWS_COEX_V9_CONFIG2_NAME "mwsCoexVictim9Config2"
#define CFG_MWS_COEX_V10_WAN_FREQ_NAME "mwsCoexVictim10WANFreq"
#define CFG_MWS_COEX_V10_WLAN_FREQ_NAME "mwsCoexVictim10WLANFreq"
#define CFG_MWS_COEX_V10_CONFIG_NAME "mwsCoexVictim10Config"
#define CFG_MWS_COEX_V10_CONFIG2_NAME "mwsCoexVictim10Config2"
#define CFG_MWS_COEX_MODEM_BACKOFF_NAME "mwsCoexModemBackoff"
#define CFG_MWS_COEX_MODEM_BACKOFF_MIN ( 0 )
#define CFG_MWS_COEX_MODEM_BACKOFF_MAX ( 0xFFFFFFFF )
#define CFG_MWS_COEX_MODEM_BACKOFF_DEFAULT ( 0 )
#define CFG_MWS_COEX_CONFIG1_NAME "mwsCoexConfig1"
#define CFG_MWS_COEX_CONFIGX_MIN ( 0 )
#define CFG_MWS_COEX_CONFIGX_MAX ( 0xFFFFFFFF )
#define CFG_MWS_COEX_CONFIGX_DEFAULT ( 0 )
#define CFG_MWS_COEX_CONFIG2_NAME "mwsCoexConfig2"
#define CFG_MWS_COEX_CONFIG3_NAME "mwsCoexConfig3"
#define CFG_MWS_COEX_CONFIG4_NAME "mwsCoexConfig4"
#define CFG_MWS_COEX_CONFIG5_NAME "mwsCoexConfig5"
#define CFG_MWS_COEX_CONFIG6_NAME "mwsCoexConfig6"
#define CFG_SAR_POWER_BACKOFF_NAME "SARPowerBackoff"
#define CFG_SAR_POWER_BACKOFF_MIN ( 0 )
#define CFG_SAR_POWER_BACKOFF_MAX ( 0xFFFFFFFF )
#define CFG_SAR_POWER_BACKOFF_DEFAULT ( 13 )
#if defined WLAN_FEATURE_VOWIFI_11R
#define CFG_FT_RESOURCE_REQ_NAME "gFTResourceReqSupported"
#define CFG_FT_RESOURCE_REQ_MIN (0)
#define CFG_FT_RESOURCE_REQ_MAX (1)
#define CFG_FT_RESOURCE_REQ_DEFAULT (0)
#endif
#define CFG_TELE_BCN_TRANS_LI_NAME "telescopicBeaconTransListenInterval"
#define CFG_TELE_BCN_TRANS_LI_MIN ( 0 )
#define CFG_TELE_BCN_TRANS_LI_MAX ( 7 )
#define CFG_TELE_BCN_TRANS_LI_DEFAULT ( 3 )
#define CFG_TELE_BCN_TRANS_LI_NUM_IDLE_BCNS_NAME "telescopicBeaconTransListenIntervalNumIdleBcns"
#define CFG_TELE_BCN_TRANS_LI_NUM_IDLE_BCNS_MIN ( 5 )
#define CFG_TELE_BCN_TRANS_LI_NUM_IDLE_BCNS_MAX ( 255 )
#define CFG_TELE_BCN_TRANS_LI_NUM_IDLE_BCNS_DEFAULT ( 10 )
#define CFG_TELE_BCN_MAX_LI_NAME "telescopicBeaconMaxListenInterval"
#define CFG_TELE_BCN_MAX_LI_MIN ( 0 )
#define CFG_TELE_BCN_MAX_LI_MAX ( 7 )
#define CFG_TELE_BCN_MAX_LI_DEFAULT ( 5 )
#define CFG_TELE_BCN_MAX_LI_NUM_IDLE_BCNS_NAME "telescopicBeaconMaxListenIntervalNumIdleBcns"
#define CFG_TELE_BCN_MAX_LI_NUM_IDLE_BCNS_MIN ( 5 )
#define CFG_TELE_BCN_MAX_LI_NUM_IDLE_BCNS_MAX ( 255 )
#define CFG_TELE_BCN_MAX_LI_NUM_IDLE_BCNS_DEFAULT ( 15 )
#define CFG_BCN_EARLY_TERM_WAKE_NAME "beaconEarlyTerminationWakeInterval"
#define CFG_BCN_EARLY_TERM_WAKE_MIN ( 2 )
#define CFG_BCN_EARLY_TERM_WAKE_MAX ( 255 )
#define CFG_BCN_EARLY_TERM_WAKE_DEFAULT ( 3 )
#define CFG_ENABLE_ROAM_DELAY_STATS "gEnableRoamDelayStats"
#define CFG_ENABLE_ROAM_DELAY_STATS_MIN ( 0 )
#define CFG_ENABLE_ROAM_DELAY_STATS_MAX ( 1 )
#define CFG_ENABLE_ROAM_DELAY_STATS_DEFAULT ( 0 )
#ifdef WLAN_FEATURE_NEIGHBOR_ROAMING
#define CFG_NEIGHBOR_SCAN_TIMER_PERIOD_NAME "gNeighborScanTimerPeriod"
#define CFG_NEIGHBOR_SCAN_TIMER_PERIOD_MIN (3)
#define CFG_NEIGHBOR_SCAN_TIMER_PERIOD_MAX (300)
#define CFG_NEIGHBOR_SCAN_TIMER_PERIOD_DEFAULT (200)
#define CFG_NEIGHBOR_REASSOC_RSSI_THRESHOLD_NAME "gNeighborReassocThreshold"
#define CFG_NEIGHBOR_REASSOC_RSSI_THRESHOLD_MIN (10)
#define CFG_NEIGHBOR_REASSOC_RSSI_THRESHOLD_MAX (125)
#define CFG_NEIGHBOR_REASSOC_RSSI_THRESHOLD_DEFAULT (83)
#define CFG_NEIGHBOR_LOOKUP_RSSI_THRESHOLD_NAME "gNeighborLookupThreshold"
#define CFG_NEIGHBOR_LOOKUP_RSSI_THRESHOLD_MIN (0)
#define CFG_NEIGHBOR_LOOKUP_RSSI_THRESHOLD_MAX (120)
#define CFG_NEIGHBOR_LOOKUP_RSSI_THRESHOLD_DEFAULT (0) /*A Zero value indicates the host to calculate
Adaptive thresold based on the minimum
supported data rate.*/
#define CFG_NEIGHBOR_SCAN_CHAN_LIST_NAME "gNeighborScanChannelList"
#define CFG_NEIGHBOR_SCAN_CHAN_LIST_DEFAULT ""
#define CFG_NEIGHBOR_SCAN_MIN_CHAN_TIME_NAME "gNeighborScanChannelMinTime"
#define CFG_NEIGHBOR_SCAN_MIN_CHAN_TIME_MIN (10)
#define CFG_NEIGHBOR_SCAN_MIN_CHAN_TIME_MAX (40)
#define CFG_NEIGHBOR_SCAN_MIN_CHAN_TIME_DEFAULT (20)
#define CFG_NEIGHBOR_SCAN_MAX_CHAN_TIME_NAME "gNeighborScanChannelMaxTime"
#define CFG_NEIGHBOR_SCAN_MAX_CHAN_TIME_MIN (3)
#define CFG_NEIGHBOR_SCAN_MAX_CHAN_TIME_MAX (300)
#define CFG_NEIGHBOR_SCAN_MAX_CHAN_TIME_DEFAULT (30)
#define CFG_11R_NEIGHBOR_REQ_MAX_TRIES_NAME "gMaxNeighborReqTries"
#define CFG_11R_NEIGHBOR_REQ_MAX_TRIES_MIN (1)
#define CFG_11R_NEIGHBOR_REQ_MAX_TRIES_MAX (4)
#define CFG_11R_NEIGHBOR_REQ_MAX_TRIES_DEFAULT (3)
#define CFG_NEIGHBOR_SCAN_RESULTS_REFRESH_PERIOD_NAME "gNeighborScanRefreshPeriod"
#define CFG_NEIGHBOR_SCAN_RESULTS_REFRESH_PERIOD_MIN (1000)
#define CFG_NEIGHBOR_SCAN_RESULTS_REFRESH_PERIOD_MAX (60000)
#define CFG_NEIGHBOR_SCAN_RESULTS_REFRESH_PERIOD_DEFAULT (20000)
#define CFG_EMPTY_SCAN_REFRESH_PERIOD_NAME "gEmptyScanRefreshPeriod"
#define CFG_EMPTY_SCAN_REFRESH_PERIOD_MIN (0)
#define CFG_EMPTY_SCAN_REFRESH_PERIOD_MAX (60000)
#define CFG_EMPTY_SCAN_REFRESH_PERIOD_DEFAULT (0)
#define CFG_NEIGHBOR_INITIAL_FORCED_ROAM_TO_5GH_ENABLE_NAME "gNeighborInitialForcedRoamTo5GhEnable"
#define CFG_NEIGHBOR_INITIAL_FORCED_ROAM_TO_5GH_ENABLE_MIN (0)
#define CFG_NEIGHBOR_INITIAL_FORCED_ROAM_TO_5GH_ENABLE_MAX (1)
#define CFG_NEIGHBOR_INITIAL_FORCED_ROAM_TO_5GH_ENABLE_DEFAULT (0)
/*
* gWeakZoneRssiThresholdForRoam is the minimum threshold value to get
* candidate list from firmware, firmware filters the received candidate with
* this param before sending candidate list to host.
*/
#define CFG_NEIGHBOR_WEAK_ZONE_RSSI_THRESHOLD_FOR_ROAM_NAME "gWeakZoneRssiThresholdForRoam"
#define CFG_NEIGHBOR_WEAK_ZONE_RSSI_THRESHOLD_FOR_ROAM_MIN (40)
#define CFG_NEIGHBOR_WEAK_ZONE_RSSI_THRESHOLD_FOR_ROAM_MAX (100)
#define CFG_NEIGHBOR_WEAK_ZONE_RSSI_THRESHOLD_FOR_ROAM_DEFAULT (80)
#endif /* WLAN_FEATURE_NEIGHBOR_ROAMING */
#define CFG_QOS_WMM_BURST_SIZE_DEFN_NAME "burstSizeDefinition"
#define CFG_QOS_WMM_BURST_SIZE_DEFN_MIN (0)
#define CFG_QOS_WMM_BURST_SIZE_DEFN_MAX (1)
#define CFG_QOS_WMM_BURST_SIZE_DEFN_DEFAULT (0)
#define CFG_QOS_WMM_TS_INFO_ACK_POLICY_NAME "tsInfoAckPolicy"
#define CFG_QOS_WMM_TS_INFO_ACK_POLICY_MIN (0x00)
#define CFG_QOS_WMM_TS_INFO_ACK_POLICY_MAX (0x01)
#define CFG_QOS_WMM_TS_INFO_ACK_POLICY_DEFAULT (0x00)
#define CFG_SINGLE_TID_RC_NAME "SingleTIDRC"
#define CFG_SINGLE_TID_RC_MIN (0) // Seperate replay counter for all TID
#define CFG_SINGLE_TID_RC_MAX (1) // Single replay counter for all TID
#define CFG_SINGLE_TID_RC_DEFAULT (1)
#define CFG_MCAST_BCAST_FILTER_SETTING_NAME "McastBcastFilter"
#define CFG_MCAST_BCAST_FILTER_SETTING_MIN (0)
#define CFG_MCAST_BCAST_FILTER_SETTING_MAX (3)
#define CFG_MCAST_BCAST_FILTER_SETTING_DEFAULT (0)
#define CFG_DYNAMIC_PSPOLL_VALUE_NAME "gDynamicPSPollvalue"
#define CFG_DYNAMIC_PSPOLL_VALUE_MIN (0)
#define CFG_DYNAMIC_PSPOLL_VALUE_MAX (255)
#define CFG_DYNAMIC_PSPOLL_VALUE_DEFAULT (0)
#define CFG_TELE_BCN_WAKEUP_EN_NAME "gTelescopicBeaconWakeupEn"
#define CFG_TELE_BCN_WAKEUP_EN_MIN (0)
#define CFG_TELE_BCN_WAKEUP_EN_MAX (1)
#define CFG_TELE_BCN_WAKEUP_EN_DEFAULT (0)
#define CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_NAME "gAddTSWhenACMIsOff"
#define CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_MIN (0)
#define CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_MAX (1) //Send AddTs even when ACM is not set for the AC
#define CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_DEFAULT (0)
#define CFG_VALIDATE_SCAN_LIST_NAME "gValidateScanList"
#define CFG_VALIDATE_SCAN_LIST_MIN (0)
#define CFG_VALIDATE_SCAN_LIST_MAX (1)
#define CFG_VALIDATE_SCAN_LIST_DEFAULT (0)
#define CFG_NULLDATA_AP_RESP_TIMEOUT_NAME "gNullDataApRespTimeout"
#define CFG_NULLDATA_AP_RESP_TIMEOUT_MIN ( WNI_CFG_PS_NULLDATA_AP_RESP_TIMEOUT_STAMIN )
#define CFG_NULLDATA_AP_RESP_TIMEOUT_MAX ( WNI_CFG_PS_NULLDATA_AP_RESP_TIMEOUT_STAMAX )
#define CFG_NULLDATA_AP_RESP_TIMEOUT_DEFAULT ( WNI_CFG_PS_NULLDATA_AP_RESP_TIMEOUT_STADEF )
#define CFG_AP_DATA_AVAIL_POLL_PERIOD_NAME "gApDataAvailPollInterval"
#define CFG_AP_DATA_AVAIL_POLL_PERIOD_MIN ( WNI_CFG_AP_DATA_AVAIL_POLL_PERIOD_STAMIN )
#define CFG_AP_DATA_AVAIL_POLL_PERIOD_MAX ( WNI_CFG_AP_DATA_AVAIL_POLL_PERIOD_STAMAX )
#define CFG_AP_DATA_AVAIL_POLL_PERIOD_DEFAULT ( WNI_CFG_AP_DATA_AVAIL_POLL_PERIOD_STADEF )
#define CFG_ENABLE_HOST_ARPOFFLOAD_NAME "hostArpOffload"
#define CFG_ENABLE_HOST_ARPOFFLOAD_MIN ( 0 )
#define CFG_ENABLE_HOST_ARPOFFLOAD_MAX ( 1 )
#define CFG_ENABLE_HOST_ARPOFFLOAD_DEFAULT ( 1 )
#define CFG_ENABLE_HOST_NSOFFLOAD_NAME "hostNSOffload"
#define CFG_ENABLE_HOST_NSOFFLOAD_MIN ( 0 )
#define CFG_ENABLE_HOST_NSOFFLOAD_MAX ( 1 )
#define CFG_ENABLE_HOST_NSOFFLOAD_DEFAULT ( 1 )
#define CFG_ENABLE_BTAMP_NAME "gEnableBtAmp"
#define CFG_ENABLE_BTAMP_MIN ( 0 )
#define CFG_ENABLE_BTAMP_MAX ( 1 )
#define CFG_ENABLE_BTAMP_DEFAULT ( 0 )
#ifdef WLAN_BTAMP_FEATURE
#define CFG_BT_AMP_PREFERRED_CHANNEL_NAME "BtAmpPreferredChannel"
#define CFG_BT_AMP_PREFERRED_CHANNEL_MIN (1)
#define CFG_BT_AMP_PREFERRED_CHANNEL_MAX (11)
#define CFG_BT_AMP_PREFERRED_CHANNEL_DEFAULT (1)
#endif //WLAN_BTAMP_FEATURE
#define CFG_BAND_CAPABILITY_NAME "BandCapability"
#define CFG_BAND_CAPABILITY_MIN (0)
#define CFG_BAND_CAPABILITY_MAX (2)
#define CFG_BAND_CAPABILITY_DEFAULT (1)
#define CFG_ENABLE_BEACON_EARLY_TERMINATION_NAME "enableBeaconEarlyTermination"
#define CFG_ENABLE_BEACON_EARLY_TERMINATION_MIN ( 0 )
#define CFG_ENABLE_BEACON_EARLY_TERMINATION_MAX ( 1 )
#define CFG_ENABLE_BEACON_EARLY_TERMINATION_DEFAULT ( 0 )
#define CFG_ENABLE_CLOSE_LOOP_NAME "gEnableCloseLoop"
#define CFG_ENABLE_CLOSE_LOOP_MIN WNI_CFG_FIXED_RATE_STAMIN
#define CFG_ENABLE_CLOSE_LOOP_MAX WNI_CFG_FIXED_RATE_STAMAX
#define CFG_ENABLE_CLOSE_LOOP_DEFAULT WNI_CFG_FIXED_RATE_STADEF
#define CFG_ENABLE_BYPASS_11D_NAME "gEnableBypass11d"
#define CFG_ENABLE_BYPASS_11D_MIN ( 0 )
#define CFG_ENABLE_BYPASS_11D_MAX ( 1 )
#define CFG_ENABLE_BYPASS_11D_DEFAULT ( 1 )
/*
* gEnableDFSChnlScan
* 0: disable scan on DFS channels
* 1: enables passive scan on DFS channels
* 2: enables active scan on DFS channels for static list.
* Static or cfg list is the channel list set by ioctl SETROAMSCANCHANNELS.
*/
#define CFG_ENABLE_DFS_CHNL_SCAN_NAME "gEnableDFSChnlScan"
#define CFG_ENABLE_DFS_CHNL_SCAN_MIN ( 0 )
#define CFG_ENABLE_DFS_CHNL_SCAN_MAX ( 2 )
#define CFG_ENABLE_DFS_CHNL_SCAN_DEFAULT ( 1 )
#define CFG_ENABLE_DFS_PNO_CHNL_SCAN_NAME "gEnableDFSPnoChnlScan"
#define CFG_ENABLE_DFS_PNO_CHNL_SCAN_MIN ( 0 )
#define CFG_ENABLE_DFS_PNO_CHNL_SCAN_MAX ( 1 )
#define CFG_ENABLE_DFS_PNO_CHNL_SCAN_DEFAULT ( 1 )
/*
* gStaAuthRetriesForCode17
* It is for an IOT issue.
* When DUT receives MAX_ASSOC_STA_REACHED_STATUS as
* response for Auth frame this ini decides how many
* times DUT has to retry.
*
* This is mainly for an AP where it wants to force
* the Station to connect to its 5G profile session
* (Dual band AP) by rejecting the Auth on 2.4G band.
* But if a station is only 2.4G capable it can try
* 3 times where third time AP will allow the
* station to connect to this AP.
*/
#define CFG_STA_AUTH_RETRIES_FOR_CODE17_NAME "gStaAuthRetriesForCode17"
#define CFG_STA_AUTH_RETRIES_FOR_CODE17_MIN ( 0 )
#define CFG_STA_AUTH_RETRIES_FOR_CODE17_MAX ( 5 )
#define CFG_STA_AUTH_RETRIES_FOR_CODE17_DEFAULT ( 0 )
/*
* <ini>
* gindoor_channel_support - Mark indoor channels as enabled or passive
* @Min: 0
* @Max: 1
* @Default: 0
*
* This ini is used to control the state of indoor channels. If the
* value is 1 then the indoor channels will be marked as enabled and
* if the value is 0 then the indoor channels will be marked as
* DFS
*
* The default value is 0
* </ini>
*/
#define CFG_INDOOR_CHANNEL_SUPPORT_NAME "gindoor_channel_support"
#define CFG_INDOOR_CHANNEL_SUPPORT_MIN (0)
#define CFG_INDOOR_CHANNEL_SUPPORT_MAX (1)
#define CFG_INDOOR_CHANNEL_SUPPORT_DEFAULT (0)
/*
* <ini>
* g_mark_indoor_as_disable - Enable/Disable Indoor channel
* @Min: 0
* @Max: 1
* @Default: 0
*
* This ini is used to mark the Indoor channel as
* disable when SAP start and revert it on SAP stop,
* so SAP will not turn on indoor channel and
* sta will not scan/associate and roam on indoor
* channels.
*
* Related: If g_mark_indoor_as_disable set, turn the
* indoor channels to disable and update Wiphy & fw.
*
* Supported Feature: SAP/STA
*
* Usage: External
*
* </ini>
*/
#define CFG_MARK_INDOOR_AS_DISABLE_NAME "g_mark_indoor_as_disable"
#define CFG_MARK_INDOOR_AS_DISABLE_MIN (0)
#define CFG_MARK_INDOOR_AS_DISABLE_MAX (1)
#define CFG_MARK_INDOOR_AS_DISABLE_DEFAULT (0)
typedef enum
{
eHDD_LINK_SPEED_REPORT_ACTUAL = 0,
eHDD_LINK_SPEED_REPORT_MAX = 1,
eHDD_LINK_SPEED_REPORT_MAX_SCALED = 2,
}eHddLinkSpeedReportType;
#ifdef WLAN_FEATURE_11AC
#define CFG_VHT_CHANNEL_WIDTH "gVhtChannelWidth"
#define CFG_VHT_CHANNEL_WIDTH_MIN ( 0 )
#define CFG_VHT_CHANNEL_WIDTH_MAX ( 2 )
#define CFG_VHT_CHANNEL_WIDTH_DEFAULT ( 2 )
#define CFG_VHT_ENABLE_RX_MCS_8_9 "gVhtRxMCS"
#define CFG_VHT_ENABLE_RX_MCS_8_9_MIN ( 0 )
#define CFG_VHT_ENABLE_RX_MCS_8_9_MAX ( 2 )
#define CFG_VHT_ENABLE_RX_MCS_8_9_DEFAULT ( 0 )
#define CFG_VHT_ENABLE_TX_MCS_8_9 "gVhtTxMCS"
#define CFG_VHT_ENABLE_TX_MCS_8_9_MIN ( 0 )
#define CFG_VHT_ENABLE_TX_MCS_8_9_MAX ( 2 )
#define CFG_VHT_ENABLE_TX_MCS_8_9_DEFAULT ( 0 )
#endif
#define CFG_REPORT_MAX_LINK_SPEED "gReportMaxLinkSpeed"
#define CFG_REPORT_MAX_LINK_SPEED_MIN ( eHDD_LINK_SPEED_REPORT_ACTUAL )
#define CFG_REPORT_MAX_LINK_SPEED_MAX ( eHDD_LINK_SPEED_REPORT_MAX_SCALED )
#define CFG_REPORT_MAX_LINK_SPEED_DEFAULT ( eHDD_LINK_SPEED_REPORT_MAX_SCALED )
/*
* RSSI Thresholds
* Used when eHDD_LINK_SPEED_REPORT_SCALED is selected
*/
#define CFG_LINK_SPEED_RSSI_HIGH "gLinkSpeedRssiHigh"
#define CFG_LINK_SPEED_RSSI_HIGH_MIN ( -127 )
#define CFG_LINK_SPEED_RSSI_HIGH_MAX ( 0 )
#define CFG_LINK_SPEED_RSSI_HIGH_DEFAULT ( -55 )
#define CFG_LINK_SPEED_RSSI_MID "gLinkSpeedRssiMed"
#define CFG_LINK_SPEED_RSSI_MID_MIN ( -127 )
#define CFG_LINK_SPEED_RSSI_MID_MAX ( 0 )
#define CFG_LINK_SPEED_RSSI_MID_DEFAULT ( -65 )
#define CFG_LINK_SPEED_RSSI_LOW "gLinkSpeedRssiLow"
#define CFG_LINK_SPEED_RSSI_LOW_MIN ( -127 )
#define CFG_LINK_SPEED_RSSI_LOW_MAX ( 0 )
#define CFG_LINK_SPEED_RSSI_LOW_DEFAULT ( -80 )
#define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_NAME "isP2pDeviceAddrAdministrated"
#define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_MIN ( 0 )
#define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_MAX ( 1 )
#define CFG_P2P_DEVICE_ADDRESS_ADMINISTRATED_DEFAULT ( 1 )
#define CFG_ENABLE_SSR "gEnableSSR"
#define CFG_ENABLE_SSR_MIN ( 0 )
#define CFG_ENABLE_SSR_MAX ( 1 )
#define CFG_ENABLE_SSR_DEFAULT ( 1 )
#define CFG_BTC_ACTIVE_WLAN_LEN_NAME "btcActiveWlanLen"
#define CFG_BTC_ACTIVE_WLAN_LEN_MIN ( 0 )
#define CFG_BTC_ACTIVE_WLAN_LEN_MAX ( 250000 )
#define CFG_BTC_ACTIVE_WLAN_LEN_DEFAULT ( 60000 )
#define CFG_BTC_ACTIVE_BT_LEN_NAME "btcActiveBtLen"
#define CFG_BTC_ACTIVE_BT_LEN_MIN ( 0 )
#define CFG_BTC_ACTIVE_BT_LEN_MAX ( 250000 )
#define CFG_BTC_ACTIVE_BT_LEN_DEFAULT ( 90000 )
#define CFG_BTC_SAP_ACTIVE_WLAN_LEN_NAME "btcSapActiveWlanLen"
#define CFG_BTC_SAP_ACTIVE_WLAN_LEN_MIN ( 0 )
#define CFG_BTC_SAP_ACTIVE_WLAN_LEN_MAX ( 250000 )
#define CFG_BTC_SAP_ACTIVE_WLAN_LEN_DEFAULT ( 30000 )
#define CFG_BTC_SAP_ACTIVE_BT_LEN_NAME "btcSapActiveBtLen"
#define CFG_BTC_SAP_ACTIVE_BT_LEN_MIN ( 0 )
#define CFG_BTC_SAP_ACTIVE_BT_LEN_MAX ( 250000 )
#define CFG_BTC_SAP_ACTIVE_BT_LEN_DEFAULT ( 30000 )
#define CFG_OBSS_HT40_SCAN_ACTIVE_DWELL_TIME_NAME "gObssScanActiveDwellTime"
#define CFG_OBSS_HT40_SCAN_ACTIVE_DWELL_TIME_MIN ( 5 )
#define CFG_OBSS_HT40_SCAN_ACTIVE_DWELL_TIME_MAX ( 1000 )
#define CFG_OBSS_HT40_SCAN_ACTIVE_DWELL_TIME_DEFAULT ( 10 )
#define CFG_OBSS_HT40_SCAN_PASSIVE_DWELL_TIME_NAME "gObssScanPassiveDwellTime"
#define CFG_OBSS_HT40_SCAN_PASSIVE_DWELL_TIME_MIN ( 10 )
#define CFG_OBSS_HT40_SCAN_PASSIVE_DWELL_TIME_MAX ( 1000 )
#define CFG_OBSS_HT40_SCAN_PASSIVE_DWELL_TIME_DEFAULT ( 20 )
#define CFG_OBSS_HT40_SCAN_WIDTH_TRIGGER_INTERVAL_NAME "gObssScanWidthTriggerInterval"
#define CFG_OBSS_HT40_SCAN_WIDTH_TRIGGER_INTERVAL_MIN ( 10 )
#define CFG_OBSS_HT40_SCAN_WIDTH_TRIGGER_INTERVAL_MAX ( 900 )
#define CFG_OBSS_HT40_SCAN_WIDTH_TRIGGER_INTERVAL_DEFAULT ( 200 )
/* RPS configurations */
#define CFG_RPS_CPU_MAP_MIN (0)
#define CFG_RPS_CPU_MAP_MAX (0xff)
#define CFG_RPS_CPU_MAP_NAME "rps_mask"
#define CFG_RPS_CPU_MAP_DEFAULT (0x00)
#define CFG_MULTICAST_HOST_FW_MSGS "gMulticastHostMsgs"
#define CFG_MULTICAST_HOST_FW_MSGS_MIN (0)
#define CFG_MULTICAST_HOST_FW_MSGS_MAX (1)
#define CFG_MULTICAST_HOST_FW_MSGS_DEFAULT (1)
#define CFG_ENABLE_TCP_DELACK_NAME "gEnableDelAck"
#define CFG_ENABLE_TCP_DELACK_MIN (0)
#define CFG_ENABLE_TCP_DELACK_MAX (1)
#define CFG_ENABLE_TCP_DELACK_DEFAULT (1)
#define CFG_BTC_2M_DYN_LONG_WLAN_LEN_NAME "gBTC2MDynLongWLAN"
#define CFG_BTC_2M_DYN_LONG_WLAN_LEN_MIN (15000)
#define CFG_BTC_2M_DYN_LONG_WLAN_LEN_MAX (55000)
#define CFG_BTC_2M_DYN_LONG_WLAN_LEN_DEFAULT (35000)
#define CFG_BTC_2M_DYN_LONG_BT_LEN_NAME "gBTC2MDynLongBT"
#define CFG_BTC_2M_DYN_LONG_BT_LEN_MIN (15000)
#define CFG_BTC_2M_DYN_LONG_BT_LEN_MAX (25000)
#define CFG_BTC_2M_DYN_LONG_BT_LEN_DEFAULT (25000)
#define CFG_BTC_2M_DYN_LONG_BT_EXT_LEN_NAME "gBTC2MDynLongBTExt"
#define CFG_BTC_2M_DYN_LONG_BT_EXT_LEN_MIN (5000)
#define CFG_BTC_2M_DYN_LONG_BT_EXT_LEN_MAX (15000)
#define CFG_BTC_2M_DYN_LONG_BT_EXT_LEN_DEFAULT (15000)
#define CFG_BTC_2M_DYN_LONG_NUM_BT_EXT_NAME "gBTC2MDynLongNumBTExt"
#define CFG_BTC_2M_DYN_LONG_NUM_BT_EXT_MIN (5)
#define CFG_BTC_2M_DYN_LONG_NUM_BT_EXT_MAX (15)
#define CFG_BTC_2M_DYN_LONG_NUM_BT_EXT_DEFAULT (15)
#ifdef SAP_AUTH_OFFLOAD
/* Enable/Disable SAP Authentication offload
* Default: enable
*/
#define CFG_ENABLE_SAP_AUTH_OFL_NAME "gEnableSAPAuthOffload"
#define CFG_ENABLE_SAP_AUTH_OFL_MIN ( 0 )
#define CFG_ENABLE_SAP_AUTH_OFL_MAX ( 1 )
#define CFG_ENABLE_SAP_AUTH_OFL_DEFAULT ( 1 )
/* SAP Authentication offload Security Type
* 0: None Security
* 1: WPA2-PSK CCMP
*/
#define CFG_SAP_AUTH_OFL_SECURITY_TYPE_NAME "gSAPAuthOffloadSec"
#define CFG_SAP_AUTH_OFL_SECURITY_TYPE_MIN ( 0 )
#define CFG_SAP_AUTH_OFL_SECURITY_TYPE_MAX ( 1 )
#define CFG_SAP_AUTH_OFL_SECURITY_TYPE_DEFAULT ( 0 )
/* SAP Authentication offload Security Key */
#define CFG_SAP_AUTH_OFL_KEY_NAME "gSAPAuthOffloadKey"
#define CFG_SAP_AUTH_OFL_KEY_DEFAULT ""
#endif /* SAP_AUTH_OFFLOAD */
/* In cfg.dat 1=1MBPS, 2=2MBPS, 3=5_5MBPS, 4=11MBPS, 5=6MBPS, 6=9MBPS,
* 7=12MBPS, 8=18MBPS, 9=24MBPS. But 6=9MBPS and 8=18MBPS are not basic
* 11g rates and should not be set by gDefaultRateIndex24Ghz. So instead
* of using index 1-9 we will use 1-7 and if user set gDefaultRateIndex24Ghz=6
* set 7=12MBPS in CFG and if user set gDefaultRateIndex24Ghz=7 set
* 9=24MBPS in CFG.
*/
#define HDD_DEFAULT_RATE_12MBPS 6
#define HDD_DEFAULT_RATE_24MBPS 7
#define CFG_DEFAULT_RATE_12MBPS 7
#define CFG_DEFAULT_RATE_24MBPS 9
#define CFG_DEFAULT_RATE_INDEX_24GH "gDefaultRateIndex24Ghz"
#define CFG_DEFAULT_RATE_INDEX_24GH_MIN ( 1 )
#define CFG_DEFAULT_RATE_INDEX_24GH_MAX ( 7 )
#define CFG_DEFAULT_RATE_INDEX_24GH_DEFAULT ( 1 )
/*
* This INI item is used to control subsystem restart(SSR) test framework
* Set its value to 1 to enable APPS trigerred SSR testing
*/
#define CFG_ENABLE_CRASH_INJECT "gEnableForceTargetAssert"
#define CFG_ENABLE_CRASH_INJECT_MIN (0)
#define CFG_ENABLE_CRASH_INJECT_MAX (1)
#define CFG_ENABLE_CRASH_INJECT_DEFAULT (0)
static __inline tANI_U32 defHddRateToDefCfgRate( tANI_U32 defRateIndex )
{
switch(defRateIndex){
case HDD_DEFAULT_RATE_12MBPS:
return CFG_DEFAULT_RATE_12MBPS;
break;
case HDD_DEFAULT_RATE_24MBPS:
return CFG_DEFAULT_RATE_24MBPS;
break;
default:
return defRateIndex;
}
}
/*
* VOS Trace Enable Control
* Notes:
* the MIN/MAX/DEFAULT values apply for all modules
* the DEFAULT value is outside the valid range. if the DEFAULT
* value is not overridden, then no change will be made to the
* "built in" default values compiled into the code
* values are a bitmap indicating which log levels are to enabled
* (must match order of vos_trace_level enumerations)
* 00000001 FATAL
* 00000010 ERROR
* 00000100 WARN
* 00001000 INFO
* 00010000 INFO HIGH
* 00100000 INFO MED
* 01000000 INFO LOW
* 10000000 DEBUG
*
* hence a value of 0xFF would set all bits (enable all logs)
*/
#define CFG_VOS_TRACE_ENABLE_BAP_NAME "vosTraceEnableBAP"
#define CFG_VOS_TRACE_ENABLE_TL_NAME "vosTraceEnableTL"
#define CFG_VOS_TRACE_ENABLE_WDI_NAME "vosTraceEnableWDI"
#define CFG_VOS_TRACE_ENABLE_HDD_NAME "vosTraceEnableHDD"
#define CFG_VOS_TRACE_ENABLE_SME_NAME "vosTraceEnableSME"
#define CFG_VOS_TRACE_ENABLE_PE_NAME "vosTraceEnablePE"
#define CFG_VOS_TRACE_ENABLE_PMC_NAME "vosTraceEnablePMC"
#define CFG_VOS_TRACE_ENABLE_WDA_NAME "vosTraceEnableWDA"
#define CFG_VOS_TRACE_ENABLE_SYS_NAME "vosTraceEnableSYS"
#define CFG_VOS_TRACE_ENABLE_VOSS_NAME "vosTraceEnableVOSS"
#define CFG_VOS_TRACE_ENABLE_SAP_NAME "vosTraceEnableSAP"
#define CFG_VOS_TRACE_ENABLE_HDD_SAP_NAME "vosTraceEnableHDDSAP"
#define CFG_VOS_TRACE_ENABLE_MIN (0)
#define CFG_VOS_TRACE_ENABLE_MAX (0xff)
#define CFG_VOS_TRACE_ENABLE_DEFAULT (0xffff)
/*
* WDI Trace Enable Control
* Notes:
* the MIN/MAX/DEFAULT values apply for all modules
* the DEFAULT value is outside the valid range. if the DEFAULT
* value is not overridden, then no change will be made to the
* "built in" default values compiled into the code
* values are a bitmap indicating which log levels are to enabled
* (must match order of wpt_tracelevel enumerations)
* 00000001 FATAL
* 00000010 ERROR
* 00000100 WARN
* 00001000 INFO
* 00010000 INFO HIGH
* 00100000 INFO MED
* 01000000 INFO LOW
*
* hence a value of 0x7F would set all bits (enable all logs)
*/
#define CFG_WDI_TRACE_ENABLE_DAL_NAME "wdiTraceEnableDAL"
#define CFG_WDI_TRACE_ENABLE_CTL_NAME "wdiTraceEnableCTL"
#define CFG_WDI_TRACE_ENABLE_DAT_NAME "wdiTraceEnableDAT"
#define CFG_WDI_TRACE_ENABLE_PAL_NAME "wdiTraceEnablePAL"
#define CFG_WDI_TRACE_ENABLE_MIN (0)
#define CFG_WDI_TRACE_ENABLE_MAX (0x7f)
#define CFG_WDI_TRACE_ENABLE_DEFAULT (0xffffffff)
#define HDD_MCASTBCASTFILTER_FILTER_NONE 0x00
#define HDD_MCASTBCASTFILTER_FILTER_ALL_MULTICAST 0x01
#define HDD_MCASTBCASTFILTER_FILTER_ALL_BROADCAST 0x02
#define HDD_MCASTBCASTFILTER_FILTER_ALL_MULTICAST_BROADCAST 0x03
#define HDD_MULTICAST_FILTER_LIST 0x04
/*
*
* SAP Auto Channel Enable
* Notes:
* Auto Channel selection for SAP configuration
* 0 - Disable Auto Channel
* 1 - Enable auto channel selection in auto mode.
* When enable auto channel, channel provided by Supplicant will be ignored.
*
* Default configuration: Auto channel is disabled.
*/
#define CFG_SAP_AUTO_CHANNEL_SELECTION_NAME "gApAutoChannelSelection"
#define CFG_SAP_AUTO_CHANNEL_SELECTION_MIN ( 0 )
#define CFG_SAP_AUTO_CHANNEL_SELECTION_MAX ( 1 )
#define CFG_SAP_AUTO_CHANNEL_SELECTION_DEFAULT ( 0 )
/* ACS Scan band preference
* 0 -- No preference
* 1 -- Scan 2.4G first
* 2 -- Scan 5G first
*/
#define CFG_SAP_SCAN_BAND_PREFERENCE "gAcsScanBandPreference"
#define CFG_SAP_SCAN_BAND_PREFERENCE_MIN (0)
#define CFG_SAP_SCAN_BAND_PREFERENCE_MAX (2)
#define CFG_SAP_SCAN_BAND_PREFERENCE_DEFAULT (0)
#define CFG_ACS_BAND_SWITCH_THRESHOLD "gACSBandSwitchThreshold"
#define CFG_ACS_BAND_SWITCH_THRESHOLD_MIN (0)
#define CFG_ACS_BAND_SWITCH_THRESHOLD_MAX (4444)
/* 2 BSS, maximus RSSI -90 */
#define CFG_ACS_BAND_SWITCH_THRESHOLD_DEFAULT (296)
/*BMPS Logic
* Notes:
* 1 - Then Host driver and above layers control the PS mechanism
* 0 - Diver/Core Stack internally control the Power saving mechanism
*/
#define CFG_ANDRIOD_POWER_SAVE_NAME "isAndroidPsEn"
#define CFG_ANDRIOD_POWER_SAVE_MIN ( 0 )
#define CFG_ANDRIOD_POWER_SAVE_MAX ( 1 )
#define CFG_ANDRIOD_POWER_SAVE_DEFAULT ( 0 )
/*
* Enable Dynamic DTIM
* Options
* 0 -Disable DynamicDTIM
* 1 to 5 - SLM will switch to DTIM specified here when host suspends and
* switch DTIM1 when host resumes */
#define CFG_ENABLE_DYNAMIC_DTIM_NAME "gEnableDynamicDTIM"
#define CFG_ENABLE_DYNAMIC_DTIM_MIN ( 0 )
#define CFG_ENABLE_DYNAMIC_DTIM_MAX ( 5 )
#define CFG_ENABLE_DYNAMIC_DTIM_DEFAULT ( 0 )
/*
* Enable First Scan 2G Only
* Options
* 0 - Disable First Scan 2G Option
* 1 - Enable First Scan 2G Option
*/
#define CFG_ENABLE_FIRST_SCAN_2G_ONLY_NAME "gEnableFirstScan2GOnly"
#define CFG_ENABLE_FIRST_SCAN_2G_ONLY_MIN ( 0 )
#define CFG_ENABLE_FIRST_SCAN_2G_ONLY_MAX ( 1 )
#define CFG_ENABLE_FIRST_SCAN_2G_ONLY_DEFAULT ( 0 )
/*
* Skip DFS Channel in case of P2P Search
* Options
* 0 - Don't Skip DFS Channel in case of P2P Search
* 1 - Skip DFS Channel in case of P2P Search
*/
#define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_NAME "gSkipDfsChannelInP2pSearch"
#define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_MIN ( 0 )
#define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_MAX ( 1 )
#define CFG_ENABLE_SKIP_DFS_IN_P2P_SEARCH_DEFAULT ( 1 )
/*
* Ignore Dynamic Dtim in case of P2P
* Options
* 0 - Consider Dynamic Dtim incase of P2P
* 1 - Ignore Dynamic Dtim incase of P2P
*/
#define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_NAME "gIgnoreDynamicDtimInP2pMode"
#define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_MIN ( 0 )
#define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_MAX ( 1 )
#define CFG_IGNORE_DYNAMIC_DTIM_IN_P2P_MODE_DEFAULT ( 0 )
#define CFG_ENABLE_AUTOMATIC_TX_POWER_CONTROL_NAME "gEnableAutomaticTxPowerControl"
#define CFG_ENABLE_AUTOMATIC_TX_POWER_CONTROL_MIN ( 0 )
#define CFG_ENABLE_AUTOMATIC_TX_POWER_CONTROL_MAX ( 1 )
#define CFG_ENABLE_AUTOMATIC_TX_POWER_CONTROL_DEFAULT ( 1 )
#define CFG_SHORT_GI_40MHZ_NAME "gShortGI40Mhz"
#define CFG_SHORT_GI_40MHZ_MIN 0
#define CFG_SHORT_GI_40MHZ_MAX 1
#define CFG_SHORT_GI_40MHZ_DEFAULT 1
/*
* Enable / Disable MCC feature
* Default: Enable
*/
#define CFG_ENABLE_MCC_ENABLED_NAME "gEnableMCCMode"
#define CFG_ENABLE_MCC_ENABLED_MIN ( 0 )
#define CFG_ENABLE_MCC_ENABLED_MAX ( 1 )
#define CFG_ENABLE_MCC_ENABLED_DEFAULT ( 1 )
/*
* Allow GO in MCC mode to accept different beacon interval than STA's.
* Added for Wi-Fi Cert. 5.1.12
* Default: gAllowMCCGODiffBI = 2
* If gAllowMCCGODiffBI = 1 // Set to 1 for WFA certification. GO Beacon
* interval is not changed. MCC GO
* doesn't work well in optimized way.
* In worst scenario, it may invite STA
* disconnection.
* gAllowMCCGODiffBI = 2 //If set to 2 workaround 1 disassoc all the clients
* and update beacon Interval
* gAllowMCCGODiffBI = 3 //If set to 3 tear down the P2P link in auto/
* Non-autonomous -GO case
* gAllowMCCGODiffBI = 4 //If set to 4 don't disconnect the P2P client
* in autonomous/Non-autonomous -GO case update
* the BI dynamically
*/
#define CFG_ALLOW_MCC_GO_DIFF_BI_NAME "gAllowMCCGODiffBI"
#define CFG_ALLOW_MCC_GO_DIFF_BI_MIN ( 0 )
#define CFG_ALLOW_MCC_GO_DIFF_BI_MAX ( 4 )
#define CFG_ALLOW_MCC_GO_DIFF_BI_DEFAULT ( 4 )
/*
* Enable/Disable Thermal Mitigation feature
* Default: Disable
*/
#define CFG_THERMAL_MIGRATION_ENABLE_NAME "gThermalMitigationEnable"
#define CFG_THERMAL_MIGRATION_ENABLE_MIN ( 0 )
#define CFG_THERMAL_MIGRATION_ENABLE_MAX ( 1 )
#define CFG_THERMAL_MIGRATION_ENABLE_DEFAULT ( 1 )
/*
* Enable/Disable Modulated DTIM feature
* Default: Disable
*/
#define CFG_ENABLE_MODULATED_DTIM_NAME "gEnableModulatedDTIM"
#define CFG_ENABLE_MODULATED_DTIM_MIN ( 0 )
#define CFG_ENABLE_MODULATED_DTIM_MAX ( 5 )
#define CFG_ENABLE_MODULATED_DTIM_DEFAULT ( 0 )
/*
* Enable/Disable Multicast MAC Address List feature
* Default: Disable
*/
#define CFG_MC_ADDR_LIST_ENABLE_NAME "gMCAddrListEnable"
#define CFG_MC_ADDR_LIST_ENABLE_MIN ( 0 )
#define CFG_MC_ADDR_LIST_ENABLE_MAX ( 1 )
#define CFG_MC_ADDR_LIST_ENABLE_DEFAULT ( 0 )
/* Set number of buffers to be advertised during ADDBA negotiation*/
#define CFG_NUM_BUFF_ADVERT_NAME "gNumBuffAdvert"
#define CFG_NUM_BUFF_ADVERT_MIN ( 0 )
#define CFG_NUM_BUFF_ADVERT_MAX ( 128 )
#define CFG_NUM_BUFF_ADVERT_DEFAULT ( 64 )
/*
* Allow MCC to modify config
*/
#define CFG_MCC_CONFIG_PARAM_NAME "gMccAllowCfgModify"
#define CFG_MCC_CONFIG_PARAM_MIN ( 0x0000 )
#define CFG_MCC_CONFIG_PARAM_MAX ( 0x01ff )
#define CFG_MCC_CONFIG_PARAM_DEFAULT ( 0x000C )
#define CFG_ENABLE_RX_STBC "gEnableRXSTBC"
#define CFG_ENABLE_RX_STBC_MIN ( 0 )
#define CFG_ENABLE_RX_STBC_MAX ( 1 )
#define CFG_ENABLE_RX_STBC_DEFAULT ( 1 )
/*
* Enable/Disable vsta based on MAX Assoc limit
* defined in WCNSS_qcom_cfg.ini.
*/
#ifdef WLAN_SOFTAP_VSTA_FEATURE
#define CFG_VSTA_SUPPORT_ENABLE "gEnableVSTASupport"
#define CFG_VSTA_SUPPORT_ENABLE_MIN ( 0 )
#define CFG_VSTA_SUPPORT_ENABLE_MAX ( 1 )
#define CFG_VSTA_SUPPORT_ENABLE_DEFAULT ( 0 )
#endif
#ifdef FEATURE_WLAN_TDLS
#define CFG_TDLS_SUPPORT_ENABLE "gEnableTDLSSupport"
#define CFG_TDLS_SUPPORT_ENABLE_MIN ( 0 )
#define CFG_TDLS_SUPPORT_ENABLE_MAX ( 1 )
#define CFG_TDLS_SUPPORT_ENABLE_DEFAULT ( 0 )
#define CFG_TDLS_IMPLICIT_TRIGGER "gEnableTDLSImplicitTrigger"
#define CFG_TDLS_IMPLICIT_TRIGGER_MIN ( 0 )
#define CFG_TDLS_IMPLICIT_TRIGGER_MAX ( 1 )
#define CFG_TDLS_IMPLICIT_TRIGGER_DEFAULT ( 0 )
#define CFG_TDLS_TX_STATS_PERIOD "gTDLSTxStatsPeriod"
#define CFG_TDLS_TX_STATS_PERIOD_MIN (1000)
#define CFG_TDLS_TX_STATS_PERIOD_MAX ( 4294967295UL )
#define CFG_TDLS_TX_STATS_PERIOD_DEFAULT (2000)
#define CFG_TDLS_TX_PACKET_THRESHOLD "gTDLSTxPacketThreshold"
#define CFG_TDLS_TX_PACKET_THRESHOLD_MIN ( 0 )
#define CFG_TDLS_TX_PACKET_THRESHOLD_MAX ( 4294967295UL )
#define CFG_TDLS_TX_PACKET_THRESHOLD_DEFAULT (40)
#define CFG_TDLS_DISCOVERY_PERIOD "gTDLSDiscoveryPeriod"
#define CFG_TDLS_DISCOVERY_PERIOD_MIN ( 5000 )
#define CFG_TDLS_DISCOVERY_PERIOD_MAX ( 4294967295UL )
#define CFG_TDLS_DISCOVERY_PERIOD_DEFAULT ( 20000 )
#define CFG_TDLS_MAX_DISCOVERY_ATTEMPT "gTDLSMaxDiscoveryAttempt"
#define CFG_TDLS_MAX_DISCOVERY_ATTEMPT_MIN ( 1 )
#define CFG_TDLS_MAX_DISCOVERY_ATTEMPT_MAX ( 100 )
#define CFG_TDLS_MAX_DISCOVERY_ATTEMPT_DEFAULT (5)
#define CFG_TDLS_IDLE_TIMEOUT "gTDLSIdleTimeout"
#define CFG_TDLS_IDLE_TIMEOUT_MIN ( 2000 )
#define CFG_TDLS_IDLE_TIMEOUT_MAX ( 40000 )
#define CFG_TDLS_IDLE_TIMEOUT_DEFAULT ( 5000 )
#define CFG_TDLS_IDLE_PACKET_THRESHOLD "gTDLSIdlePacketThreshold"
#define CFG_TDLS_IDLE_PACKET_THRESHOLD_MIN ( 0 )
#define CFG_TDLS_IDLE_PACKET_THRESHOLD_MAX ( 40000 )
#define CFG_TDLS_IDLE_PACKET_THRESHOLD_DEFAULT ( 5 )
#define CFG_TDLS_RSSI_HYSTERESIS "gTDLSRssiHysteresis"
#define CFG_TDLS_RSSI_HYSTERESIS_MIN ( 0 )
#define CFG_TDLS_RSSI_HYSTERESIS_MAX ( 100 )
#define CFG_TDLS_RSSI_HYSTERESIS_DEFAULT ( 100 )
#define CFG_TDLS_RSSI_TRIGGER_THRESHOLD "gTDLSRSSITriggerThreshold"
#define CFG_TDLS_RSSI_TRIGGER_THRESHOLD_MIN ( -120 )
#define CFG_TDLS_RSSI_TRIGGER_THRESHOLD_MAX ( 0 )
#define CFG_TDLS_RSSI_TRIGGER_THRESHOLD_DEFAULT ( -75 )
#define CFG_TDLS_RSSI_TEARDOWN_THRESHOLD "gTDLSRSSITeardownThreshold"
#define CFG_TDLS_RSSI_TEARDOWN_THRESHOLD_MIN ( -120 )
#define CFG_TDLS_RSSI_TEARDOWN_THRESHOLD_MAX ( 0 )
#define CFG_TDLS_RSSI_TEARDOWN_THRESHOLD_DEFAULT ( -75 )
#define CFG_TDLS_QOS_WMM_UAPSD_MASK_NAME "gTDLSUapsdMask" // ACs to setup U-APSD for TDLS Sta
#define CFG_TDLS_QOS_WMM_UAPSD_MASK_MIN (0)
#define CFG_TDLS_QOS_WMM_UAPSD_MASK_MAX (15)
#define CFG_TDLS_QOS_WMM_UAPSD_MASK_DEFAULT (0)
#define CFG_TDLS_BUFFER_STA_SUPPORT_ENABLE "gEnableTDLSBufferSta"
#define CFG_TDLS_BUFFER_STA_SUPPORT_ENABLE_MIN (0)
#define CFG_TDLS_BUFFER_STA_SUPPORT_ENABLE_MAX (1)
#define CFG_TDLS_BUFFER_STA_SUPPORT_ENABLE_DEFAULT (1)
#define CFG_TDLS_PUAPSD_INACTIVITY_TIME "gTDLSPuapsdInactivityTime"
#define CFG_TDLS_PUAPSD_INACTIVITY_TIME_MIN (0)
#define CFG_TDLS_PUAPSD_INACTIVITY_TIME_MAX (10)
#define CFG_TDLS_PUAPSD_INACTIVITY_TIME_DEFAULT (0)
#define CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD "gTDLSPuapsdRxFrameThreshold"
#define CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD_MIN (10)
#define CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD_MAX (20)
#define CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD_DEFAULT (10)
#define CFG_TDLS_EXTERNAL_CONTROL "gTDLSExternalControl"
#define CFG_TDLS_EXTERNAL_CONTROL_MIN (0)
#define CFG_TDLS_EXTERNAL_CONTROL_MAX (1)
#define CFG_TDLS_EXTERNAL_CONTROL_DEFAULT (1)
#define CFG_TDLS_OFF_CHANNEL_SUPPORT_ENABLE "gEnableTDLSOffChannel"
#define CFG_TDLS_OFF_CHANNEL_SUPPORT_ENABLE_MIN (0)
#define CFG_TDLS_OFF_CHANNEL_SUPPORT_ENABLE_MAX (1)
#define CFG_TDLS_OFF_CHANNEL_SUPPORT_ENABLE_DEFAULT (1)
#define CFG_TDLS_WMM_MODE_ENABLE "gEnableTDLSWmmMode"
#define CFG_TDLS_WMM_MODE_ENABLE_MIN (0)
#define CFG_TDLS_WMM_MODE_ENABLE_MAX (1)
#define CFG_TDLS_WMM_MODE_ENABLE_DEFAULT (1)
#define CFG_TDLS_SCAN_COEX_SUPPORT_ENABLE "gEnableTDLSScanCoexistence"
#define CFG_TDLS_SCAN_COEX_SUPPORT_ENABLE_MIN (0)
#define CFG_TDLS_SCAN_COEX_SUPPORT_ENABLE_MAX (1)
#define CFG_TDLS_SCAN_COEX_SUPPORT_ENABLE_DEFAULT (0)
/* Enable/Disable Consecutive Beacon miss */
#define CFG_ENABLE_CONSECUTIVE_BMISS_NAME "gEnableConcBmiss"
#define CFG_ENABLE_CONSECUTIVE_BMISS_MIN ( 2 )
#define CFG_ENABLE_CONSECUTIVE_BMISS_MAX ( 10 )
#define CFG_ENABLE_CONSECUTIVE_BMISS_DEFAULT ( 5 )
/* Enable/Disable units of beacon wait time */
#define CFG_ENABLE_UNITS_BEACON_WAIT_NAME "gEnableUnitBwait"
#define CFG_ENABLE_UNITS_BEACON_WAIT_MIN ( 2 )
#define CFG_ENABLE_UNITS_BEACON_WAIT_MAX ( 10 )
#define CFG_ENABLE_UNITS_BEACON_WAIT_DEFAULT ( 2 )
/* if gEnableTDLSScan
* 0: Same as gEnableTDLSScanCoexistence ; driver will do disconnect if
* Peer is not buffer STA capable.
* 1: Dut will scan in all cases.
* 2: If peer is not buffer STA capable, use CTS2self to do scan.
*/
#define CFG_TDLS_SCAN_ENABLE "gEnableTDLSScan"
#define CFG_TDLS_SCAN_ENABLE_MIN (0)
#define CFG_TDLS_SCAN_ENABLE_MAX (2)
#define CFG_TDLS_SCAN_ENABLE_DEFAULT (1)
#define CFG_TDLS_ENABLE_DEFER_TIMER "gTDLSEnableDeferTime"
#define CFG_TDLS_ENABLE_DEFER_TIMER_MIN (2000)
#define CFG_TDLS_ENABLE_DEFER_TIMER_MAX (6000)
#define CFG_TDLS_ENABLE_DEFER_TIMER_DEFAULT (5000)
#endif
#ifdef WLAN_FEATURE_LINK_LAYER_STATS
#define CFG_LINK_LAYER_STATS_ENABLE "gEnableLLStats"
#define CFG_LINK_LAYER_STATS_ENABLE_MIN (0)
#define CFG_LINK_LAYER_STATS_ENABLE_MAX (1)
#define CFG_LINK_LAYER_STATS_ENABLE_DEFAULT (1)
#endif
#ifdef WLAN_FEATURE_EXTSCAN
#define CFG_EXTSCAN_ENABLE "gEnableEXTScan"
#define CFG_EXTSCAN_ENABLE_MIN (0)
#define CFG_EXTSCAN_ENABLE_MAX (1)
#define CFG_EXTSCAN_ENABLE_DEFAULT (1)
#endif
#ifdef WLAN_ACTIVEMODE_OFFLOAD_FEATURE
#define CFG_ACTIVEMODE_OFFLOAD_ENABLE "gEnableActiveModeOffload"
#define CFG_ACTIVEMODE_OFFLOAD_ENABLE_MIN ( 0 )
#define CFG_ACTIVEMODE_OFFLOAD_ENABLE_MAX ( 1 )
#define CFG_ACTIVEMODE_OFFLOAD_ENABLE_DEFAULT ( 1 )
#endif
/* Enable/Disable LPWR Image(cMEM uBSP) Transition */
#define CFG_ENABLE_LPWR_IMG_TRANSITION_NAME "gEnableLpwrImgTransition"
#define CFG_ENABLE_LPWR_IMG_TRANSITION_MIN ( 0 )
#define CFG_ENABLE_LPWR_IMG_TRANSITION_MAX ( 1 )
#define CFG_ENABLE_LPWR_IMG_TRANSITION_DEFAULT ( 1 )
/*
* Scan Aging timeout value in seconds
*/
#define CFG_SCAN_AGING_PARAM_NAME "gScanAgingTime"
#define CFG_SCAN_AGING_PARAM_MIN ( 0 )
#define CFG_SCAN_AGING_PARAM_MAX ( 200 )
#define CFG_SCAN_AGING_PARAM_DEFAULT ( 60 )
/* Config Param to enable the txLdpc capability
* 0 - disable
* 1 - HT LDPC enable
* 2 - VHT LDPC enable
* 3 - HT & VHT LDPC enable */
#define CFG_TX_LDPC_ENABLE_FEATURE "gTxLdpcEnable"
#define CFG_TX_LDPC_ENABLE_FEATURE_MIN ( 0 )
#define CFG_TX_LDPC_ENABLE_FEATURE_MAX ( 3 )
#define CFG_TX_LDPC_ENABLE_FEATURE_DEFAULT ( 0 )
/*
* Enable / Disable MCC Adaptive Scheduler feature
* Default: Enable
*/
#define CFG_ENABLE_MCC_ADATIVE_SCHEDULER_ENABLED_NAME "gEnableMCCAdaptiveScheduler"
#define CFG_ENABLE_MCC_ADATIVE_SCHEDULER_ENABLED_MIN ( 0 )
#define CFG_ENABLE_MCC_ADATIVE_SCHEDULER_ENABLED_MAX ( 1 )
#define CFG_ENABLE_MCC_ADATIVE_SCHEDULER_ENABLED_DEFAULT ( 1 )
#ifdef WLAN_FEATURE_11AC
#define CFG_VHT_SU_BEAMFORMEE_CAP_FEATURE "gTxBFEnable"
#define CFG_VHT_SU_BEAMFORMEE_CAP_FEATURE_MIN ( WNI_CFG_VHT_SU_BEAMFORMEE_CAP_STAMIN )
#define CFG_VHT_SU_BEAMFORMEE_CAP_FEATURE_MAX ( WNI_CFG_VHT_SU_BEAMFORMEE_CAP_STAMAX )
#define CFG_VHT_SU_BEAMFORMEE_CAP_FEATURE_DEFAULT ( WNI_CFG_VHT_SU_BEAMFORMEE_CAP_STADEF )
#define CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED "gTxBFCsnValue"
#define CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_MIN ( WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_STAMIN )
#define CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_MAX ( WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_STAMAX - 1 )
#define CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_DEFAULT ( WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_STAMAX - 1 )
#define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE "gEnableMuBformee"
#define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE_MIN ( 0 )
#define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE_MAX ( 1 )
#define CFG_VHT_ENABLE_MU_BFORMEE_CAP_FEATURE_DEFAULT ( 1 )
#define CFG_VHT_AMPDU_LEN_EXP_NAME "gVhtMaxAmpduLenExp"
#define CFG_VHT_AMPDU_LEN_EXP_MIN ( 0 )
#define CFG_VHT_AMPDU_LEN_EXP_MAX ( 7 )
#define CFG_VHT_AMPDU_LEN_EXP_DEFAULT ( 7 )
#endif
/*
* SAP ALLOW All Channels
*/
#define CFG_SAP_ALLOW_ALL_CHANNEL_PARAM_NAME "gSapAllowAllChannel"
#define CFG_SAP_ALLOW_ALL_CHANNEL_PARAM_MIN ( 0 )
#define CFG_SAP_ALLOW_ALL_CHANNEL_PARAM_MAX ( 1 )
#define CFG_SAP_ALLOW_ALL_CHANNEL_PARAM_DEFAULT ( 0 )
#ifdef WLAN_FEATURE_11AC
#define CFG_DISABLE_LDPC_WITH_TXBF_AP "gDisableLDPCWithTxbfAP"
#define CFG_DISABLE_LDPC_WITH_TXBF_AP_MIN ( 0 )
#define CFG_DISABLE_LDPC_WITH_TXBF_AP_MAX ( 1 )
#define CFG_DISABLE_LDPC_WITH_TXBF_AP_DEFAULT ( 0 )
#endif
#define CFG_LIST_OF_NON_DFS_COUNTRY_CODE "gListOfNonDfsCountryCode"
#define CFG_LIST_OF_NON_DFS_COUNTRY_CODE_DEFAULT "JO,MA"
/*
* IBSS Operating Channels for 2.4G and 5GHz channels
*/
#define CFG_IBSS_ADHOC_CHANNEL_5GHZ_NAME "gAdHocChannel5G"
#define CFG_IBSS_ADHOC_CHANNEL_5GHZ_MIN ( 36 )
#define CFG_IBSS_ADHOC_CHANNEL_5GHZ_MAX ( 165 )
#define CFG_IBSS_ADHOC_CHANNEL_5GHZ_DEFAULT ( 44 )
#define CFG_IBSS_ADHOC_CHANNEL_24GHZ_NAME "gAdHocChannel24G"
#define CFG_IBSS_ADHOC_CHANNEL_24GHZ_MIN ( 1 )
#define CFG_IBSS_ADHOC_CHANNEL_24GHZ_MAX ( 14 )
#define CFG_IBSS_ADHOC_CHANNEL_24GHZ_DEFAULT ( 6 )
#define CFG_LIST_OF_NON_11AC_COUNTRY_CODE "gListOfNon11acCountryCode"
#define CFG_LIST_OF_NON_11AC_COUNTRY_CODE_DEFAULT "RU,UA,ZA"
/* Parameter to control VHT support in 2.4 GHz band */
#define CFG_ENABLE_VHT_FOR_24GHZ_NAME "gEnableVhtFor24GHzBand"
#define CFG_ENABLE_VHT_FOR_24GHZ_MIN (0)
#define CFG_ENABLE_VHT_FOR_24GHZ_MAX (1)
#define CFG_ENABLE_VHT_FOR_24GHZ_DEFAULT (0)
#define CFG_MAX_MEDIUM_TIME "gMaxMediumTime"
#define CFG_MAX_MEDIUM_TIME_STAMIN WNI_CFG_MAX_MEDIUM_TIME_STAMIN
#define CFG_MAX_MEDIUM_TIME_STAMAX WNI_CFG_MAX_MEDIUM_TIME_STAMAX
#define CFG_MAX_MEDIUM_TIME_STADEFAULT WNI_CFG_MAX_MEDIUM_TIME_STADEF
/*
* SAP/P2P-GO mode traffic monitor
*/
#define CFG_ENABLE_TRAFFIC_MONITOR "gEnableTrafficMonitor"
#define CFG_ENABLE_TRAFFIC_MONITOR_MIN ( 0 )
#define CFG_ENABLE_TRAFFIC_MONITOR_MAX ( 1 )
#define CFG_ENABLE_TRAFFIC_MONITOR_DEFAULT ( 0 )
#define CFG_TRAFFIC_IDLE_TIMEOUT "gTrafficIdleTimeout"
#define CFG_TRAFFIC_IDLE_TIMEOUT_MIN ( 3000 )
#define CFG_TRAFFIC_IDLE_TIMEOUT_MAX ( 10000 )
#define CFG_TRAFFIC_IDLE_TIMEOUT_DEFAULT ( 5000 )
/*
* SCAN Offload
*/
#define CFG_SCAN_OFFLOAD_NAME "gEnableDirectedScanOffload"
#define CFG_SCAN_OFFLOAD_DISABLE ( 0 )
#define CFG_SCAN_OFFLOAD_ENABLE ( 1 )
#define CFG_SCAN_OFFLOAD_DEFAULT ( CFG_SCAN_OFFLOAD_DISABLE )
/*
* Enable legacy fast roaming (LFR) on STA link during concurrent sessions
*/
#ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD
#define CFG_ENABLE_FAST_ROAM_IN_CONCURRENCY "gEnableFastRoamInConcurrency"
#define CFG_ENABLE_FAST_ROAM_IN_CONCURRENCY_MIN ( 0 )
#define CFG_ENABLE_FAST_ROAM_IN_CONCURRENCY_MAX ( 1 )
#define CFG_ENABLE_FAST_ROAM_IN_CONCURRENCY_DEFAULT ( 1 )
#endif
/*
* FlexConnectPowerFactor parameter
* Default: Disable (0)
*/
#define CFG_FLEX_CONNECT_POWER_FACTOR_NAME "gFlexConnectPowerFactor"
#define CFG_FLEX_CONNECT_POWER_FACTOR_MIN ( 0 )
#define CFG_FLEX_CONNECT_POWER_FACTOR_MAX ( 9 )
#define CFG_FLEX_CONNECT_POWER_FACTOR_DEFAULT ( 0 )
/*
* Enable heart beat monitoring offload to FW
*/
#define CFG_ENABLE_HEART_BEAT_OFFLOAD "gEnableIbssHeartBeatOffload"
#define CFG_ENABLE_HEART_BEAT_OFFLOAD_MIN ( 0 )
#define CFG_ENABLE_HEART_BEAT_OFFLOAD_MAX ( 1 )
#define CFG_ENABLE_HEART_BEAT_OFFLOAD_DEFAULT ( 1 )
#define CFG_ANTENNA_DIVERSITY_PARAM_NAME "gAntennaDiversity"
#define CFG_ANTENNA_DIVERSITY_PARAM_MIN ( 0 )
#define CFG_ANTENNA_DIVERSITY_PARAM_MAX ( 3 )
#define CFG_ANTENNA_DIVERSITY_PARAM_DEFAULT ( 0 )
#define CFG_ENABLE_SNR_MONITORING_NAME "gEnableSNRMonitoring"
#define CFG_ENABLE_SNR_MONITORING_MIN ( 0 )
#define CFG_ENABLE_SNR_MONITORING_MAX ( 1 )
#define CFG_ENABLE_SNR_MONITORING_DEFAULT ( 0 )
//Macro to enable/disable dynamic timer
#define CFG_DYNAMIC_SPLIT_SCAN_NAME "gEnableDynSplitScan"
#define CFG_DYNAMIC_SPLIT_SCAN_MIN ( 0 )
#define CFG_DYNAMIC_SPLIT_SCAN_MAX ( 1 )
#define CFG_DYNAMIC_SPLIT_SCAN_DEFAULT ( 1 )
//Macro to monitor the packet count
#define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_THRSHLD_NAME "gSplitScanTxRxThreshold"
#define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_THRSHLD_MIN ( 10 )
#define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_THRSHLD_MAX ( 100 )
#define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_THRSHLD_DEFAULT ( 50 )
//Macro to handle the monitor timer value in milliseconds
#define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_TIMER_NAME "gSplitScanTxRxTimer"
#define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_TIMER_MIN ( 1000 )
#define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_TIMER_MAX ( 10000 )
#define CFG_SPLIT_SCAN_TRAFFIC_MONITOR_TIMER_DEFAULT ( 5000 )
#ifdef FEATURE_WLAN_SCAN_PNO
#define CFG_PNO_SCAN_SUPPORT "gPNOScanSupport"
#define CFG_PNO_SCAN_SUPPORT_ENABLE ( 1 )
#define CFG_PNO_SCAN_SUPPORT_DISABLE ( 0 )
#define CFG_PNO_SCAN_SUPPORT_DEFAULT ( 1 )
#define CFG_PNO_SCAN_TIMER_REPEAT_VALUE "gPNOScanTimerRepeatValue"
#define CFG_PNO_SCAN_TIMER_REPEAT_VALUE_DEFAULT ( 6 )
#define CFG_PNO_SCAN_TIMER_REPEAT_VALUE_MIN ( 0 )
#define CFG_PNO_SCAN_TIMER_REPEAT_VALUE_MAX ( 0xffffffff )
#endif
/* Not supporting this feature in pronto */
#define CFG_AMSDU_SUPPORT_IN_AMPDU_NAME "gAmsduSupportInAMPDU"
#define CFG_AMSDU_SUPPORT_IN_AMPDU_MIN (0)
#define CFG_AMSDU_SUPPORT_IN_AMPDU_MAX (0)
#define CFG_AMSDU_SUPPORT_IN_AMPDU_DEFAULT (0) //disabled
/* Prefer connecting to 5G AP even if its RSSI is lower by
gSelect5GHzMargin dBm than 2.4G AP.
This feature requires the dependent cfg.ini "gRoamPrefer5GHz" set to 1 */
#define CFG_STRICT_5GHZ_PREF_BY_MARGIN "gSelect5GHzMargin"
#define CFG_STRICT_5GHZ_PREF_BY_MARGIN_MIN (0)
#define CFG_STRICT_5GHZ_PREF_BY_MARGIN_MAX (60)
#define CFG_STRICT_5GHZ_PREF_BY_MARGIN_DEFAULT (0) //set 0 to disable
#define CFG_COALESING_IN_IBSS_NAME "gCoalesingInIBSS"
#define CFG_COALESING_IN_IBSS_MIN (0)
#define CFG_COALESING_IN_IBSS_MAX (1)
#define CFG_COALESING_IN_IBSS_DEFAULT (0) //disabled
#define CFG_DISABLE_ATH_NAME "gAthDisable"
#define CFG_DISABLE_ATH_MIN (0)
#define CFG_DISABLE_ATH_MAX (1)
#define CFG_DISABLE_ATH_DEFAULT (0)
//Enable Memory Debug
#ifdef MEMORY_DEBUG
#define CFG_ENABLE_MEMORY_DEBUG_NAME "gEnableMemoryDebug"
#define CFG_ENABLE_MEMORY_DEBUG_MIN (0)
#define CFG_ENABLE_MEMORY_DEBUG_MAX (1)
#define CFG_ENABLE_MEMORY_DEBUG_DEFAULT (0)
#endif
#define CFG_OVERRIDE_COUNTRY_CODE "gStaCountryCode"
#define CFG_OVERRIDE_COUNTRY_CODE_DEFAULT "000"
/*Once the period expires the RSSI will be compared with Threshold
* and if needed trigger events will be raised
*/
#define CFG_ASD_PROBE_INTERVAL_NAME "gAsdProbeInterval"
#define CFG_ASD_PROBE_INTERVAL_DEFAULT (50)
#define CFG_ASD_PROBE_INTERVAL_MIN (1)
#define CFG_ASD_PROBE_INTERVAL_MAX (500)
/* RSSI Threshold used to trigger probing activity/selection process*/
#define CFG_ASD_TRIGGER_THRESHOLD_NAME "gAsdTriggerThreshold"
#define CFG_ASD_TRIGGER_THRESHOLD_DEFAULT (-60)
#define CFG_ASD_TRIGGER_THRESHOLD_MIN (-100)
#define CFG_ASD_TRIGGER_THRESHOLD_MAX (-10)
/*RSSI Hysteresis Threshold for RSSI-RTT*/
#define CFG_ASD_RTT_RSSI_HYST_THRESHOLD_NAME "gAsdRTTRssiHystThreshold"
#define CFG_ASD_RTT_RSSI_HYST_THRESHOLD_DEFAULT (3)
#define CFG_ASD_RTT_RSSI_HYST_THRESHOLD_MIN (0)
#define CFG_ASD_RTT_RSSI_HYST_THRESHOLD_MAX (5)
//Enable debug for remain on channel issues
#define CFG_DEBUG_P2P_REMAIN_ON_CHANNEL_NAME "gDebugP2pRemainOnChannel"
#define CFG_DEBUG_P2P_REMAIN_ON_CHANNEL_DEFAULT ( 0 )
#define CFG_DEBUG_P2P_REMAIN_ON_CHANNEL_MIN ( 0 )
#define CFG_DEBUG_P2P_REMAIN_ON_CHANNEL_MAX ( 1 )
#define CFG_CTS2S_DURING_BTC_SCO_NAME "btcCTS2SduringSCO"
#define CFG_CTS2S_DURING_BTC_SCO_DEFAULT WNI_CFG_BTC_CTS2S_DURING_SCO_STADEF
#define CFG_CTS2S_DURING_BTC_SCO_MIN WNI_CFG_BTC_CTS2S_DURING_SCO_STAMIN
#define CFG_CTS2S_DURING_BTC_SCO_MAX WNI_CFG_BTC_CTS2S_DURING_SCO_STAMAX
#define CFG_BTC_FAST_WLAN_CONN_PREF "gBtcFastWlanConnPref"
#define CFG_BTC_FAST_WLAN_CONN_PREF_DEFAULT ( 1 )
#define CFG_BTC_FAST_WLAN_CONN_PREF_MIN ( 0 )
#define CFG_BTC_FAST_WLAN_CONN_PREF_MAX ( 5 )
#define CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN "gBtcStaticOppWlanIdleWlanLen"
#define CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN_DEFAULT ( 30000 )
#define CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN_MIN ( 0 )
#define CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN_MAX ( 250000 )
#define CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN "gBtcStaticOppWlanIdleBtLen"
#define CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN_DEFAULT ( 120000 )
#define CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN_MIN ( 0 )
#define CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN_MAX ( 250000 )
#define CFG_BTC_DISABLE_WLAN_LINK_CRITICAL "gBtcDisableWlanLinkCritical"
#define CFG_BTC_DISABLE_WLAN_LINK_CRITICAL_DEFAULT ( 0 )
#define CFG_BTC_DISABLE_WLAN_LINK_CRITICAL_MIN ( 0 )
#define CFG_BTC_DISABLE_WLAN_LINK_CRITICAL_MAX ( 1 )
/*
* Connection related log Enable/Disable.
* 0x1 - Enable mgmt pkt logs (no probe req/rsp).
* 0x2 - Enable EAPOL pkt logs.
* 0x4 - Enable DHCP pkt logs.
* 0x0 - Disable all the above connection related logs.
*/
#define CFG_ENABLE_DEBUG_CONNECT_ISSUE "gEnableDebugLog"
#define CFG_ENABLE_DEBUG_CONNECT_ISSUE_MIN (0)
#define CFG_ENABLE_DEBUG_CONNECT_ISSUE_MAX (0xFF)
#define CFG_ENABLE_DEBUG_CONNECT_ISSUE_DEFAULT (0)
#define CFG_ENABLE_STRICT_REGULATORY_FOR_FCC_NAME "gEnableStrictRegulatoryForFCC"
#define CFG_ENABLE_STRICT_REGULATORY_FOR_FCC_MIN ( 0 )
#define CFG_ENABLE_STRICT_REGULATORY_FOR_FCC_MAX ( 1 )
#define CFG_ENABLE_STRICT_REGULATORY_FOR_FCC_DEFAULT ( 0 )
#define CFG_ADVERTISE_CONCURRENT_OPERATION_NAME "gAdvertiseConcurrentOperation"
#define CFG_ADVERTISE_CONCURRENT_OPERATION_DEFAULT ( 1 )
#define CFG_ADVERTISE_CONCURRENT_OPERATION_MIN ( 0 )
#define CFG_ADVERTISE_CONCURRENT_OPERATION_MAX ( 1 )
#define CFG_RA_FILTER_ENABLE_NAME "gRAFilterEnable"
#define CFG_RA_FILTER_ENABLE_DEFAULT (0)
#define CFG_RA_FILTER_ENABLE_MIN (0)
#define CFG_RA_FILTER_ENABLE_MAX (1)
#define CFG_RA_RATE_LIMIT_INTERVAL_NAME "gRARateLimitInterval"
#define CFG_RA_RATE_LIMIT_INTERVAL_DEFAULT (60)
#define CFG_RA_RATE_LIMIT_INTERVAL_MIN (0)
#define CFG_RA_RATE_LIMIT_INTERVAL_MAX (3600)
#define CFG_ROAMING_DFS_CHANNEL_NAME "gAllowDFSChannelRoam"
#define CFG_ROAMING_DFS_CHANNEL_MIN (0)
#define CFG_ROAMING_DFS_CHANNEL_MAX (1)
#define CFG_ROAMING_DFS_CHANNEL_DEFAULT (1)
#define CFG_TCP_DELACK_COMPUTE_INTERVAL "gTcpDelAckComputeInterval"
#define CFG_TCP_DELACK_COMPUTE_INTERVAL_DEFAULT ( 2000 )
#define CFG_TCP_DELACK_COMPUTE_INTERVAL_MIN ( 1000 )
#define CFG_TCP_DELACK_COMPUTE_INTERVAL_MAX ( 10000 )
#define CFG_TCP_DELACK_THRESHOLD_HIGH "gTcpDelAckThresholdHigh"
#define CFG_TCP_DELACK_THRESHOLD_HIGH_DEFAULT ( 17000 )
#define CFG_TCP_DELACK_THRESHOLD_HIGH_MIN ( 1000 )
#define CFG_TCP_DELACK_THRESHOLD_HIGH_MAX ( 25000 )
#define CFG_TCP_DELACK_THRESHOLD_LOW "gTcpDelAckThresholdLow"
#define CFG_TCP_DELACK_THRESHOLD_LOW_DEFAULT ( 12000 )
#define CFG_TCP_DELACK_THRESHOLD_LOW_MIN ( 0 )
#define CFG_TCP_DELACK_THRESHOLD_LOW_MAX ( 25000 )
#ifdef WLAN_LOGGING_SOCK_SVC_ENABLE
//Enable WLAN Logging to app space
#define CFG_WLAN_LOGGING_SUPPORT_NAME "wlanLoggingEnable"
#define CFG_WLAN_LOGGING_SUPPORT_ENABLE ( 1 )
#define CFG_WLAN_LOGGING_SUPPORT_DISABLE ( 0 )
#define CFG_WLAN_LOGGING_SUPPORT_DEFAULT ( 1 )
//Enable FATAL and ERROR logs for kmsg console
#define CFG_WLAN_LOGGING_FE_CONSOLE_SUPPORT_NAME "wlanLoggingFEToConsole"
#define CFG_WLAN_LOGGING_FE_CONSOLE_SUPPORT_ENABLE ( 1 )
#define CFG_WLAN_LOGGING_FE_CONSOLE_SUPPORT_DISABLE ( 0 )
#define CFG_WLAN_LOGGING_FE_CONSOLE_SUPPORT_DEFAULT ( 1 )
//Number of buffers to be used for WLAN logging
#define CFG_WLAN_LOGGING_NUM_BUF_NAME "wlanLoggingNumBuf"
#define CFG_WLAN_LOGGING_NUM_BUF_MIN ( 4 )
#define CFG_WLAN_LOGGING_NUM_BUF_MAX ( 64 )
#define CFG_WLAN_LOGGING_NUM_BUF_DEFAULT ( 32 )
//Number of buffers to be used for WLAN logging
#define CFG_WLAN_PKT_STATS_NUM_BUF_NAME "wlanPerPktStatsNumBuf"
#define CFG_WLAN_PKT_STATS_NUM_BUF_MIN ( 4 )
#define CFG_WLAN_PKT_STATS_NUM_BUF_MAX ( 64 )
#define CFG_WLAN_PKT_STATS_NUM_BUF_DEFAULT ( 16 )
#endif //WLAN_LOGGING_SOCK_SVC_ENABLE
//Enable PerPKT stats Logging
#define CFG_WLAN_PKT_STATS_LOGGING_NAME "wlanPerPktStatsLogEnable"
#define CFG_WLAN_PKT_STATS_LOGGING_ENABLE ( 1 )
#define CFG_WLAN_PKT_STATS_LOGGING_DISABLE ( 0 )
#define CFG_WLAN_PKT_STATS_LOGGING_DEFAULT ( 1 )
#define CFG_IGNORE_PEER_ERP_INFO_NAME "gIgnorePeerErpInfo"
#define CFG_IGNORE_PEER_ERP_INFO_MIN ( 0 )
#define CFG_IGNORE_PEER_ERP_INFO_MAX ( 1 )
#define CFG_IGNORE_PEER_ERP_INFO_DEFAULT ( 0 )
#define CFG_IGNORE_PEER_HT_MODE_NAME "gIgnorePeerHTopMode"
#define CFG_IGNORE_PEER_HT_MODE_MIN ( 0 )
#define CFG_IGNORE_PEER_HT_MODE_MAX ( 1 )
#define CFG_IGNORE_PEER_HT_MODE_DEFAULT ( 0 )
#define CFG_INITIAL_DWELL_TIME_NAME "gInitialDwellTime"
#define CFG_INITIAL_DWELL_TIME_DEFAULT (0)
#define CFG_INITIAL_DWELL_TIME_MIN (0)
#define CFG_INITIAL_DWELL_TIME_MAX (100)
#define CFG_INITIAL_SCAN_SKIP_DFS_CH_NAME "gInitialScanSkipDFSCh"
#define CFG_INITIAL_SCAN_SKIP_DFS_CH_DEFAULT (1)
#define CFG_INITIAL_SCAN_SKIP_DFS_CH_MIN (0)
#define CFG_INITIAL_SCAN_SKIP_DFS_CH_MAX (1)
#define CFG_BTC_FATAL_HID_NSNIFF_BLK_GUIDANCE_NAME "btcFatalHidnSniffBlkGuidance"
#define CFG_BTC_FATAL_HID_NSNIFF_BLK_GUIDANCE_MIN ( 0 )
#define CFG_BTC_FATAL_HID_NSNIFF_BLK_GUIDANCE_MAX ( 2 )
#define CFG_BTC_FATAL_HID_NSNIFF_BLK_GUIDANCE_DEFAULT ( 2 )
#define CFG_BTC_CRITICAL_HID_NSNIFF_BLK_GUIDANCE_NAME "btcCriticalHidnSniffBlkGuidance"
#define CFG_BTC_CRITICAL_HID_NSNIFF_BLK_GUIDANCE_MIN ( 0 )
#define CFG_BTC_CRITICAL_HID_NSNIFF_BLK_GUIDANCE_MAX ( 1 )
#define CFG_BTC_CRITICAL_HID_NSNIFF_BLK_GUIDANCE_DEFAULT ( 1 )
#define CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD_NAME "btcA2dpTxQueueThold"
#define CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD_MIN ( 0 )
#define CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD_MAX ( 1 )
#define CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD_DEFAULT ( 0 )
#define CFG_BTC_DYN_OPP_TX_QUEUE_THOLD_NAME "btcOppTxQueueThold"
#define CFG_BTC_DYN_OPP_TX_QUEUE_THOLD_MIN ( 0 )
#define CFG_BTC_DYN_OPP_TX_QUEUE_THOLD_MAX ( 3 )
#define CFG_BTC_DYN_OPP_TX_QUEUE_THOLD_DEFAULT ( 1 )
#ifdef WLAN_FEATURE_11W
#define CFG_PMF_SA_QUERY_MAX_RETRIES_NAME "pmfSaQueryMaxRetries"
#define CFG_PMF_SA_QUERY_MAX_RETRIES_DEFAULT ( 5 )
#define CFG_PMF_SA_QUERY_MAX_RETRIES_MIN ( 0 )
#define CFG_PMF_SA_QUERY_MAX_RETRIES_MAX ( 20 )
#define CFG_PMF_SA_QUERY_RETRY_INTERVAL_NAME "pmfSaQueryRetryInterval"
#define CFG_PMF_SA_QUERY_RETRY_INTERVAL_DEFAULT ( 200 )
#define CFG_PMF_SA_QUERY_RETRY_INTERVAL_MIN ( 0 )
#define CFG_PMF_SA_QUERY_RETRY_INTERVAL_MAX ( 2000 )
#endif
#define CFG_DEFER_IMPS_FOR_TIME_NAME "gDeferIMPStime"
#define CFG_DEFER_IMPS_FOR_TIME_MIN (0)
#define CFG_DEFER_IMPS_FOR_TIME_MAX (500)
#define CFG_DEFER_IMPS_FOR_TIME_DEFAULT (200)
/* If last disconnection was due to HB failure and we reconnect
* to same AP next time, send Deauth before starting connection
*/
#define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION "gSendDeauthBeforeCon"
#define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION_MIN (0)
#define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION_MAX (1)
#define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION_DEFAULT (0)
/* gEnableMacAddrSpoof = 0 => disable mac spoofing
= 1 => enable mac spoofing in both HOST and FW
= 2 => enable mac spoofing in FW and
disable mac spoofing in HOST
*/
#define CFG_ENABLE_MAC_ADDR_SPOOFING "gEnableMacAddrSpoof"
#define CFG_ENABLE_MAC_ADDR_SPOOFING_MIN (0)
#define CFG_ENABLE_MAC_ADDR_SPOOFING_MAX (2)
#define CFG_ENABLE_MAC_ADDR_SPOOFING_DEFAULT (0)
/* Disable Mac Spoof for p2p Scan */
#define CFG_DISABLE_P2P_MAC_ADDR_SPOOFING "gDisableP2PMacAddrSpoof"
#define CFG_DISABLE_P2P_MAC_ADDR_SPOOFING_MIN (0)
#define CFG_DISABLE_P2P_MAC_ADDR_SPOOFING_MAX (1)
#define CFG_DISABLE_P2P_MAC_ADDR_SPOOFING_DEFAULT (1)
#define CFG_ENABLE_FATAL_EVENT_TRIGGER "gEnableFatalEvent"
#define CFG_ENABLE_FATAL_EVENT_TRIGGER_MIN (0)
#define CFG_ENABLE_FATAL_EVENT_TRIGGER_MAX (1)
#define CFG_ENABLE_FATAL_EVENT_TRIGGER_DEFAULT (1)
#define CFG_ENABLE_MGMT_LOGGING "gEnableMgmtLogging"
#define CFG_ENABLE_MGMT_LOGGING_MIN (0)
#define CFG_ENABLE_MGMT_LOGGING_MAX (1)
#define CFG_ENABLE_MGMT_LOGGING_DEFAULT (0)
#define CFG_ENABLE_BMUHW_TRACING "gEnableBMUHWtracing"
#define CFG_ENABLE_BMUHW_TRACING_MIN (0)
#define CFG_ENABLE_BMUHW_TRACING_MAX (1)
#define CFG_ENABLE_BMUHW_TRACING_DEFAULT (1)
#define CFG_ENABLE_FW_LOGGING "gEnableFWLogging"
#define CFG_ENABLE_FW_LOGGING_MIN (0)
#define CFG_ENABLE_FW_LOGGING_MAX (1)
#define CFG_ENABLE_FW_LOGGING_DEFAULT (1)
// firmware will wakeup the host to send logs always
#define CFG_ENABLE_FW_CONTINIOUS_LOGGING "gEnableContFWLogging"
#define CFG_ENABLE_FW_CONTINIOUS_LOGGING_MIN (0)
#define CFG_ENABLE_FW_CONTINIOUS_LOGGING_MAX (1)
#define CFG_ENABLE_FW_CONTINIOUS_LOGGING_DEFAULT (0)
/* when firmware log reaches this threshold and
* if host is awake it will push the logs.
*/
#define CFG_MIN_LOGGING_BUFFER_SIZE "gMinLoggingBufferSize"
#define CFG_MIN_LOGGING_BUFFER_SIZE_MIN (0)
#define CFG_MIN_LOGGING_BUFFER_SIZE_MAX (6)
#define CFG_MIN_LOGGING_BUFFER_SIZE_DEFAULT (1)
// Max ring size in firmware to log msgs when host is suspended state
#define CFG_MAX_LOGGING_BUFFER_SIZE "gMaxLoggingBufferSize"
#define CFG_MAX_LOGGING_BUFFER_SIZE_MIN (0)
#define CFG_MAX_LOGGING_BUFFER_SIZE_MAX (6)
#define CFG_MAX_LOGGING_BUFFER_SIZE_DEFAULT (6)
#define CFG_ENABLE_CH_AVOID "gEnableChannelAvoidance"
#define CFG_ENABLE_CH_AVOID_MIN ( 0 )
#define CFG_ENABLE_CH_AVOID_MAX ( 1 )
#define CFG_ENABLE_CH_AVOID_DEFAULT ( 1 )
#define CFG_MAX_CONCURRENT_CONNECTIONS_NAME "gMaxConcurrentActiveSessions"
#define CFG_MAX_CONCURRENT_CONNECTIONS_DEFAULT ( 2 )
#define CFG_MAX_CONCURRENT_CONNECTIONS_MIN ( 1 )
#define CFG_MAX_CONCURRENT_CONNECTIONS_MAX ( 4 )
#ifdef WLAN_FEATURE_AP_HT40_24G
#define CFG_ENABLE_HT_2040_COEX "gApHT4024G"
#define CFG_ENABLE_HT_2040_COEX_MIN ( 0 )
#define CFG_ENABLE_HT_2040_COEX_MAX ( 1 )
#define CFG_ENABLE_HT_2040_COEX_DEFAULT ( 0 )
#endif
//Enable Dynamic WMM PS support
#define CFG_ENABLE_DYNAMIC_WMMPS_NAME "gEnableDynamicWMMPS"
#define CFG_ENABLE_DYNAMIC_WMM_PS_MIN (0)
#define CFG_ENABLE_DYNAMIC_WMM_PS_MAX (1)
#define CFG_ENABLE_DYNAMIC_WMM_PS_DEFAULT (1)
/*
* If the number of consecutive SPs for which the firmware has sent
* trigger frame (because more data bit was set to 1 at end of SP)
* when dynamic WMM PS support is enabled exceeds this value then
* firmware will come out of power save mode
*/
#define CFG_MAX_UAPSD_CONSEC_SP_NAME "gMaxUapsdConsecSP"
#define CFG_MAX_UAPSD_CONSEC_SP_DEFAULT ( 10 )
#define CFG_MAX_UAPSD_CONSEC_SP_MIN ( 0 )
#define CFG_MAX_UAPSD_CONSEC_SP_MAX ( 500 )
/*
* If the number of frames received in the "gUapsdConsecRxCntMeasWindow"
* exceeds this value then firmware will come out of power save mode.
* Comes into effect only when dynamic WMM PS is enabled.
*/
#define CFG_MAX_UAPSD_CONSEC_RX_CNT_NAME "gMaxUapsdConsecRxCnt"
#define CFG_MAX_UAPSD_CONSEC_RX_CNT_DEFAULT ( 50 )
#define CFG_MAX_UAPSD_CONSEC_RX_CNT_MIN ( 0 )
#define CFG_MAX_UAPSD_CONSEC_RX_CNT_MAX ( 5000 )
/*
* If the number of frames transmitted in the "gUapsdConsecTxCntMeasWindow"
* exceeds this value then firmware will come out of power save mode.
* Comes into effect only when dynamic WMM PS is enabled.
*/
#define CFG_MAX_UAPSD_CONSEC_TX_CNT_NAME "gMaxUapsdConsecTxCnt"
#define CFG_MAX_UAPSD_CONSEC_TX_CNT_DEFAULT ( 50 )
#define CFG_MAX_UAPSD_CONSEC_TX_CNT_MIN ( 0 )
#define CFG_MAX_UAPSD_CONSEC_TX_CNT_MAX ( 5000 )
// Read the description in "gMaxUapsdConsecRxCnt", the interval is in msec
#define CFG_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW_NAME "gUapsdConsecRxCntMeasWindow"
#define CFG_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW_DEFAULT ( 500 )
#define CFG_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW_MIN ( 50 )
#define CFG_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW_MAX ( 50000 )
// Read the description in "gMaxUapsdConsecTxCnt", the interval is in msec
#define CFG_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW_NAME "gUapsdConsecTxCntMeasWindow"
#define CFG_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW_DEFAULT ( 500 )
#define CFG_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW_MIN ( 50 )
#define CFG_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW_MAX ( 50000 )
/*
* number of PS poll frames that can be sent by the firmware to retrieve
* Data before the firmware comes out of power save mode for an AC
* which is neither Delivery or Trigger enabled when dynamic WMM PS
* is configured.
* Comes into effect only when dynamic WMM PS is enabled.
*/
#define CFG_UAPSD_PSPOLL_NAME "gMaxPsPollInWmmUapsdMode"
#define CFG_UAPSD_PSPOLL_MIN (0)
#define CFG_UAPSD_PSPOLL_MAX (255)
#define CFG_UAPSD_PSPOLL_DEFAULT (0)
/*
* If the number of itervals for which the firmware detects no activity
* on the WMM PS enabled ACs exceeds this value then the firmware will
* go to power save mode. The length of the interval is dynamically
* calculated by the firmware depending on the configured service
* intervals.
* Comes into effect only when dynamic WMM PS is enabled.
*/
#define CFG_MAX_UAPSD_INACT_INTVL_NAME "gMaxUapsdInactivityIntervals"
#define CFG_MAX_UAPSD_INACT_INTVL_MIN (1)
#define CFG_MAX_UAPSD_INACT_INTVL_MAX (255)
#define CFG_MAX_UAPSD_INACT_INTVL_DEFAULT (10)
#define CFG_BURST_MODE_BE_TXOP_VALUE "gBurstModeTXOPValue"
#define CFG_BURST_MODE_BE_TXOP_VALUE_MIN ( 0 )
#define CFG_BURST_MODE_BE_TXOP_VALUE_MAX ( 12288 )
#define CFG_BURST_MODE_BE_TXOP_VALUE_DEFAULT ( 0 )
#define CFG_P2P_LISTEN_DEFER_INTERVAL_NAME "gP2PListenDeferInterval"
#define CFG_P2P_LISTEN_DEFER_INTERVAL_MIN ( 100 )
#define CFG_P2P_LISTEN_DEFER_INTERVAL_MAX ( 200 )
#define CFG_P2P_LISTEN_DEFER_INTERVAL_DEFAULT ( 100 )
#define CFG_BTC_ENABLE_IND_TIMER_VALUE "gBtcEnableIndTimerVal"
#define CFG_BTC_ENABLE_IND_TIMER_VALUE_MIN ( 5 )
#define CFG_BTC_ENABLE_IND_TIMER_VALUE_MAX ( 60 )
#define CFG_BTC_ENABLE_IND_TIMER_VALUE_DEFAULT ( 60 )
#define CFG_DXE_REPLENISH_RX_TIMER_VALUE "gDXEReplenishRXTimerVal"
#define CFG_DXE_REPLENISH_RX_TIMER_VALUE_MIN ( 0 )
#define CFG_DXE_REPLENISH_RX_TIMER_VALUE_MAX ( 20000 )
#define CFG_DXE_REPLENISH_RX_TIMER_VALUE_DEFAULT ( 6000 )
#define CFG_DXE_SSR_ENABLE "gDxeSSREnable"
#define CFG_DXE_SSR_ENABLE_DEFAULT ( 1 )
#define CFG_DXE_SSR_ENABLE_MIN ( 0 )
#define CFG_DXE_SSR_ENABLE_MAX ( 1 )
#define CFG_TOGGLE_ARP_BDRATES_NAME "gToggleArpBDRates"
#define CFG_TOGGLE_ARP_BDRATES_MIN 0
#define CFG_TOGGLE_ARP_BDRATES_MAX 2
#define CFG_TOGGLE_ARP_BDRATES_DEFAULT 0
#define CFG_DISABLE_BAR_WAKEUP_HOST_NAME "gDisableBarWakeUp"
#define CFG_DISABLE_BAR_WAKEUP_HOST_MIN 0
#define CFG_DISABLE_BAR_WAKEUP_HOST_MAX 1
#define CFG_DISABLE_BAR_WAKEUP_HOST_DEFAULT 0
#ifdef DHCP_SERVER_OFFLOAD
/*
* Enable/Disable DHCP Server Offload
* Default: Disable
*/
#define CFG_DHCP_SERVER_OFFLOAD_SUPPORT_NAME "gDHCPServerOffloadEnable"
#define CFG_DHCP_SERVER_OFFLOAD_SUPPORT_MIN ( 0 )
#define CFG_DHCP_SERVER_OFFLOAD_SUPPORT_MAX ( 1 )
#define CFG_DHCP_SERVER_OFFLOAD_SUPPORT_DEFAULT ( 1 )
/* Max number of DHCP clients to be supported */
#define CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT_NAME "gDHCPMaxNumClients"
#define CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT_MIN ( 1 )
#define CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT_MAX ( 4 )
#define CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT_DEFAULT ( 4 )
/* Start address of the pool */
#define CFG_DHCP_SERVER_OFFLOAD_START_LSB_NAME "gDHCPStartLsb"
#define CFG_DHCP_SERVER_OFFLOAD_START_LSB_MIN ( 100 )
#define CFG_DHCP_SERVER_OFFLOAD_START_LSB_MAX ( 255 )
#define CFG_DHCP_SERVER_OFFLOAD_START_LSB_DEFAULT ( 100 )
/* DHCP Server IP*/
#define CFG_DHCP_SERVER_IP_NAME "gDHCPServerIP"
#define CFG_DHCP_SERVER_IP_DEFAULT "192.168.43.1"
#endif /* DHCP_SERVER_OFFLOAD */
#ifdef MDNS_OFFLOAD
/*
* Enable/Disable multicast DNS Offload
* 0x0 - Disable mDNS (Default)
* 0x1 - Enable mDNS
*/
#define CFG_MDNS_OFFLOAD_SUPPORT_NAME "gMDNSOffloadEnable"
#define CFG_MDNS_OFFLOAD_SUPPORT_MIN ( 0 )
#define CFG_MDNS_OFFLOAD_SUPPORT_MAX ( 1 )
#define CFG_MDNS_OFFLOAD_SUPPORT_ENABLE ( 1 )
#define CFG_MDNS_OFFLOAD_SUPPORT_DEFAULT ( 1 )
/* Set FQDN string for mDNS */
#define CFG_MDNS_FQDN_NAME "gMDNSFqdn"
#define CFG_MDNS_FQDN_DEFAULT "_GoProRemote._tcp.local"
/* Set UFQDN string for mDNS */
#define CFG_MDNS_UNIQUE_FQDN_NAME "gMDNSUniqueFqdn"
#define CFG_MDNS_UNIQUE_FQDN_DEFAULT "service._GoProRemote._tcp.local"
/* Set the response Type A to mDNS queries */
#define CFG_MDNS_RESPONSE_TYPE_A_NAME "gMDNSResponseTypeA"
#define CFG_MDNS_RESPONSE_TYPE_A_DEFAULT "goprobp-D89685121212.local"
#define CFG_MDNS_RESPONSE_TYPE_A_IPV4_NAME "gMDNSResponseTypeAIpv4Addr"
#define CFG_MDNS_RESPONSE_TYPE_A_IPV4_MIN ( 1 )
#define CFG_MDNS_RESPONSE_TYPE_A_IPV4_MAX ( 0xffffffff )
#define CFG_MDNS_RESPONSE_TYPE_A_IPV4_DEFAULT ( 0xc0a80102 )
/* Set the response Type TXT to mDNS queries */
#define CFG_MDNS_RESPONSE_TYPE_TXT_NAME "gMDNSResponseTypeTXT"
#define CFG_MDNS_RESPONSE_TYPE_TXT_DEFAULT "GoProBP-D89685121212._GoProRemote._tcp.local"
#define CFG_MDNS_RESPONSE_TYPE_TXT_CNT_NAME "gMDNSResponseTypeTXTContent"
#define CFG_MDNS_RESPONSE_TYPE_TXT_CNT_DEFAULT "Device=HERO 3+-BAWA Model=BAWA Version=HD3.11.02.00 Wifi Version=4.0.36.0 Protocol Version=2"
/* Set the response Type PTR to mDNS queries */
#define CFG_MDNS_RESPONSE_TYPE_PTR_NAME "gMDNSResponseTypePTR"
#define CFG_MDNS_RESPONSE_TYPE_PTR_DEFAULT "_GoProRemote._tcp.local"
#define CFG_MDNS_RESPONSE_TYPE_PTR_DN_NAME "gMDNSResponseTypePTRDomainName"
#define CFG_MDNS_RESPONSE_TYPE_PTR_DN_DEFAULT "GoProBP-D89685121212._GoProRemote._tcp.local"
/* Set the response Type SRV to mDNS queries */
#define CFG_MDNS_RESPONSE_TYPE_SRV_NAME "gMDNSResponseTypeSRV"
#define CFG_MDNS_RESPONSE_TYPE_SRV_DEFAULT "GoProBP-D89685121212._GoProRemote._tcp.local"
/* Set the response Type SRV Priority to mDNS queries */
#define CFG_MDNS_RESPONSE_TYPE_SRV_PRIORITY_NAME "gMDNSResponseTypeSRVPriority"
#define CFG_MDNS_RESPONSE_TYPE_SRV_PRIORITY_MIN ( 0 )
#define CFG_MDNS_RESPONSE_TYPE_SRV_PRIORITY_MAX ( 65535 )
#define CFG_MDNS_RESPONSE_TYPE_SRV_PRIORITY_DEFAULT ( 0 )
/* Set the response Type SRV Weight to mDNS queries */
#define CFG_MDNS_RESPONSE_TYPE_SRV_WEIGHT_NAME "gMDNSResponseTypeSRVWeight"
#define CFG_MDNS_RESPONSE_TYPE_SRV_WEIGHT_MIN ( 0 )
#define CFG_MDNS_RESPONSE_TYPE_SRV_WEIGHT_MAX ( 65525 )
#define CFG_MDNS_RESPONSE_TYPE_SRV_WEIGHT_DEFAULT ( 0 )
/* Set the response Type SRV Port to mDNS queries */
#define CFG_MDNS_RESPONSE_TYPE_SRV_PORT_NAME "gMDNSResponseTypeSRVPort"
#define CFG_MDNS_RESPONSE_TYPE_SRV_PORT_MIN ( 0 )
#define CFG_MDNS_RESPONSE_TYPE_SRV_PORT_MAX ( 65525 )
#define CFG_MDNS_RESPONSE_TYPE_SRV_PORT_DEFAULT ( 80 )
/* Set the response Type SRV Target to mDNS queries */
#define CFG_MDNS_RESPONSE_TYPE_SRV_TGT_NAME "gMDNSResponseTypeSRVTarget"
#define CFG_MDNS_RESPONSE_TYPE_SRV_TGT_DEFAULT "goprobp-D89685121212.local"
#endif /* MDNS_OFFLOAD */
/*
* gExtScanConcMode is used to manage EXT Scan during concurrency
* This can be useful during WFD session. To avoid glitches during WFD
* either ext scan has to be disabled or use split scan
* 0: Disable EXT Scan
* 1: Use Split scan
* 2: Enable EXT Scan
*/
#define CFG_EXT_SCAN_CONC_MODE "gExtScanConcMode"
#define CFG_EXT_SCAN_CONC_MODE_MIN (0)
#define CFG_EXT_SCAN_CONC_MODE_MAX (2)
#define CFG_EXT_SCAN_CONC_MODE_DEFAULT (0)
/*
* If within gLinkFailTimeout period(values is mentioned in msec) if FW
* doesn't receive acks for gLinkFailTxCnt number of packets, then link will
* be disconnected.
*/
#define CFG_LINK_FAIL_TIMEOUT_NAME "gLinkFailTimeout"
#define CFG_LINK_FAIL_TIMEOUT_MIN ( 1000 )
#define CFG_LINK_FAIL_TIMEOUT_MAX ( 60000 )
#define CFG_LINK_FAIL_TIMEOUT_DEF ( 6000 )
#define CFG_LINK_FAIL_TX_CNT_NAME "gLinkFailTxCnt"
#define CFG_LINK_FAIL_TX_CNT_MIN ( 50 )
#define CFG_LINK_FAIL_TX_CNT_MAX ( 1000 )
#define CFG_LINK_FAIL_TX_CNT_DEF ( 200 )
#define CFG_OPTIMIZE_CA_EVENT_NAME "gOptimizeCAevent"
#define CFG_OPTIMIZE_CA_EVENT_DISABLE ( 0 )
#define CFG_OPTIMIZE_CA_EVENT_ENABLE ( 1 )
#define CFG_OPTIMIZE_CA_EVENT_DEFAULT ( 0 )
#define CFG_FWR_MEM_DUMP_NAME "gEnableFwrMemDump"
#define CFG_FWR_MEM_DUMP_MAX ( 1 )
#define CFG_FWR_MEM_DUMP_MIN ( 0 )
#define CFG_FWR_MEM_DUMP_DEF ( 1 )
#define CFG_ACTIVE_PASSIVE_CHAN_CONV_NAME "gActivePassiveChCon"
#define CFG_ACTIVE_PASSIVE_CHAN_CONV_MIN (0)
#define CFG_ACTIVE_PASSIVE_CHAN_CONV_MAX (1)
#define CFG_ACTIVE_PASSIVE_CHAN_CONV_DEF (1)
#define CFG_WIFI_CONFIG_ENABLE "gEnableWifiConfig"
#define CFG_WIFI_CONFIG_MIN (0)
#define CFG_WIFI_CONFIG_MAX (1)
#define CFG_WIFI_CONFIG_DEFAULT (1)
#define CFG_MAXCHAN_FOR_CHANTIME_CORR_NAME "gMaxChannelForMoreDwellTime"
#define CFG_MAXCHAN_FOR_CHANTIME_CORR_MIN (0)
#define CFG_MAXCHAN_FOR_CHANTIME_CORR_MAX (35)
#define CFG_MAXCHAN_FOR_CHANTIME_CORR_DEFAULT (10)
/*
* BOffsetCorrectionEnable : This ini will control enabling/disabling
* of rate dependent power offsets in firmware
*/
#define CFG_SAR_BOFFSET_SET_CORRECTION_NAME "gBOffsetCorrectionEnable"
#define CFG_SAR_BOFFSET_SET_CORRECTION_MIN (0)
#define CFG_SAR_BOFFSET_SET_CORRECTION_MAX (1)
#define CFG_SAR_BOFFSET_SET_CORRECTION_DEFAULT (0)
/*
* If gEnableEdcaParams is set to 1, params gEdcaVoCwmin,
* gEdcaViCwmin, gEdcaBkCwmin, gEdcaBeCwmin, gEdcaVoCwmax,
* gEdcaViCwmax, gEdcaBkCwmax, gEdcaBeCwmax, gEdcaVoAifs,
* gEdcaViAifs, gEdcaBkAifs and gEdcaBeAifs values are used
* to overwrite the values received from AP
*/
#define CFG_ENABLE_EDCA_INI_NAME "gEnableEdcaParams"
#define CFG_ENABLE_EDCA_INI_MIN (0)
#define CFG_ENABLE_EDCA_INI_MAX (1)
#define CFG_ENABLE_EDCA_INI_DEFAULT (0)
/* Cwmin value for EDCA_AC_VO. CWVomin = 2^gEdcaVoCwmin -1 */
#define CFG_EDCA_VO_CWMIN_VALUE_NAME "gEdcaVoCwmin"
#define CFG_EDCA_VO_CWMIN_VALUE_MIN (0x0)
#define CFG_EDCA_VO_CWMIN_VALUE_MAX (15)
#define CFG_EDCA_VO_CWMIN_VALUE_DEFAULT (2)
/* Cwmin value for EDCA_AC_VI. CWVimin = 2^gEdcaViCwmin -1 */
#define CFG_EDCA_VI_CWMIN_VALUE_NAME "gEdcaViCwmin"
#define CFG_EDCA_VI_CWMIN_VALUE_MIN (0x0)
#define CFG_EDCA_VI_CWMIN_VALUE_MAX (15)
#define CFG_EDCA_VI_CWMIN_VALUE_DEFAULT (3)
/* Cwmin value for EDCA_AC_BK. CWBkmin = 2^gEdcaBkCwmin -1 */
#define CFG_EDCA_BK_CWMIN_VALUE_NAME "gEdcaBkCwmin"
#define CFG_EDCA_BK_CWMIN_VALUE_MIN (0x0)
#define CFG_EDCA_BK_CWMIN_VALUE_MAX (15)
#define CFG_EDCA_BK_CWMIN_VALUE_DEFAULT (4)
/* Cwmin value for EDCA_AC_BE. CWBemin = 2^gEdcaBeCwmin -1 */
#define CFG_EDCA_BE_CWMIN_VALUE_NAME "gEdcaBeCwmin"
#define CFG_EDCA_BE_CWMIN_VALUE_MIN (0x0)
#define CFG_EDCA_BE_CWMIN_VALUE_MAX (15)
#define CFG_EDCA_BE_CWMIN_VALUE_DEFAULT (4)
/* Cwmax value for EDCA_AC_VO. CWVomax = 2^gEdcaVoCwmax -1 */
#define CFG_EDCA_VO_CWMAX_VALUE_NAME "gEdcaVoCwmax"
#define CFG_EDCA_VO_CWMAX_VALUE_MIN (0)
#define CFG_EDCA_VO_CWMAX_VALUE_MAX (15)
#define CFG_EDCA_VO_CWMAX_VALUE_DEFAULT (3)
/* Cwmax value for EDCA_AC_VI. CWVimax = 2^gEdcaViCwmax -1 */
#define CFG_EDCA_VI_CWMAX_VALUE_NAME "gEdcaViCwmax"
#define CFG_EDCA_VI_CWMAX_VALUE_MIN (0)
#define CFG_EDCA_VI_CWMAX_VALUE_MAX (15)
#define CFG_EDCA_VI_CWMAX_VALUE_DEFAULT (4)
/* Cwmax value for EDCA_AC_BK. CWBkmax = 2^gEdcaBkCwmax -1 */
#define CFG_EDCA_BK_CWMAX_VALUE_NAME "gEdcaBkCwmax"
#define CFG_EDCA_BK_CWMAX_VALUE_MIN (0)
#define CFG_EDCA_BK_CWMAX_VALUE_MAX (15)
#define CFG_EDCA_BK_CWMAX_VALUE_DEFAULT (10)
/* Cwmax value for EDCA_AC_BE. CWBemax = 2^gEdcaBeCwmax -1 */
#define CFG_EDCA_BE_CWMAX_VALUE_NAME "gEdcaBeCwmax"
#define CFG_EDCA_BE_CWMAX_VALUE_MIN (0)
#define CFG_EDCA_BE_CWMAX_VALUE_MAX (15)
#define CFG_EDCA_BE_CWMAX_VALUE_DEFAULT (10)
/* Aifs value for EDCA_AC_VO.*/
#define CFG_EDCA_VO_AIFS_VALUE_NAME "gEdcaVoAifs"
#define CFG_EDCA_VO_AIFS_VALUE_MIN (0)
#define CFG_EDCA_VO_AIFS_VALUE_MAX (15)
#define CFG_EDCA_VO_AIFS_VALUE_DEFAULT (2)
/* Aifs value for EDCA_AC_VI.*/
#define CFG_EDCA_VI_AIFS_VALUE_NAME "gEdcaViAifs"
#define CFG_EDCA_VI_AIFS_VALUE_MIN (0)
#define CFG_EDCA_VI_AIFS_VALUE_MAX (15)
#define CFG_EDCA_VI_AIFS_VALUE_DEFAULT (2)
/* Aifs value for EDCA_AC_BK.*/
#define CFG_EDCA_BK_AIFS_VALUE_NAME "gEdcaBkAifs"
#define CFG_EDCA_BK_AIFS_VALUE_MIN (0)
#define CFG_EDCA_BK_AIFS_VALUE_MAX (15)
#define CFG_EDCA_BK_AIFS_VALUE_DEFAULT (7)
/* Aifs value for EDCA_AC_BE.*/
#define CFG_EDCA_BE_AIFS_VALUE_NAME "gEdcaBeAifs"
#define CFG_EDCA_BE_AIFS_VALUE_MIN (0)
#define CFG_EDCA_BE_AIFS_VALUE_MAX (15)
#define CFG_EDCA_BE_AIFS_VALUE_DEFAULT (3)
/* If gSendMgmtPktViaWQ5 is enabled, mgmt packet will go via WQ5 */
#define CFG_SEND_MGMT_PKT_VIA_WQ5_NAME "gSendMgmtPktViaWQ5"
#define CFG_SEND_MGMT_PKT_VIA_WQ5_MIN ( 0 )
#define CFG_SEND_MGMT_PKT_VIA_WQ5_MAX ( 1)
#define CFG_SEND_MGMT_PKT_VIA_WQ5_DEF ( 0 )
/*
* gSapProbeRespOffload: when set in sap, offloads the
* probe response transmission to firmware
*/
#define CFG_SAP_PROBE_RESP_OFFLOAD_NAME "gSapProbeRespOffload"
#define CFG_SAP_PROBE_RESP_OFFLOAD_MIN (0)
#define CFG_SAP_PROBE_RESP_OFFLOAD_MAX (1)
#define CFG_SAP_PROBE_RESP_OFFLOAD_DEFAULT (1)
/*
* gDisableScanDuringSco is used to disable/enable scan during SCO call
* This can be useful to avoid glitches because of EXIT_IMPS invoked by scan
* when SCO call in progress
* 0: Enable scan
* 1: Disable scan
*/
#define CFG_DISABLE_SCAN_DURING_SCO "gDisableScanDuringSco"
#define CFG_DISABLE_SCAN_DURING_SCO_MIN (0)
#define CFG_DISABLE_SCAN_DURING_SCO_MAX (1)
#define CFG_DISABLE_SCAN_DURING_SCO_DEFAULT (0)
#define CFG_SAP_INTERNAL_RESTART_NAME "gEnableSapInternalRestart"
#define CFG_SAP_INTERNAL_RESTART_MIN (0)
#define CFG_SAP_INTERNAL_RESTART_MAX (1)
#define CFG_SAP_INTERNAL_RESTART_DEFAULT (1)
/*
* maximum interval (in seconds) for a
* single scan plan supported by the device.
*/
#define CFG_MAX_SCHED_SCAN_PLAN_INT_NAME "g_max_sched_scan_plan_int"
#define CFG_MAX_SCHED_SCAN_PLAN_INT_MIN (1)
#define CFG_MAX_SCHED_SCAN_PLAN_INT_MAX (7200)
#define CFG_MAX_SCHED_SCAN_PLAN_INT_DEFAULT (3600)
/*
* maximum number of iterations for a single
* scan plan supported by the device.
*/
#define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_NAME "g_max_sched_scan_plan_itrns"
#define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_MIN (1)
#define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_MAX (100)
#define CFG_MAX_SCHED_SCAN_PLAN_ITRNS_DEFAULT (10)
/*
* gEnableLFRMBB is used to disable/enable LFR Make before Break
* 1: Enable LFR Make before Break
* 0: Disable LFR Make before Break
*/
#define CFG_ENABLE_LFR_MBB "gEnableLFRMBB"
#define CFG_ENABLE_LFR_MBB_MIN (0)
#define CFG_ENABLE_LFR_MBB_MAX (1)
#define CFG_ENABLE_LFR_MBB_DEFAULT (0)
/* Value for TRIGGER_NULLFRAME_BEFORE_HB.*/
#define CFG_TRIGGER_NULLFRAME_BEFORE_HB_NAME "gTriggerNullframeBeforeHb"
#define CFG_TRIGGER_NULLFRAME_BEFORE_HB_MIN (0)
#define CFG_TRIGGER_NULLFRAME_BEFORE_HB_MAX (1)
#define CFG_TRIGGER_NULLFRAME_BEFORE_HB_DEFAULT (0)
/*
* If enabled ecsa will be used to switch channel to force scc else SAP
* will be restarted.
*/
#define CFG_FORCE_SCC_WITH_ECSA_NAME "force_scc_with_ecsa"
#define CFG_FORCE_SCC_WITH_ECSA_MIN (0)
#define CFG_FORCE_SCC_WITH_ECSA_MAX (1)
#define CFG_FORCE_SCC_WITH_ECSA_DEFAULT (1)
#define CFG_STA_SAP_SCC_ON_DFS_CHAN "sta_sap_scc_on_dfs_chan"
#define CFG_STA_SAP_SCC_ON_DFS_CHAN_MIN (0)
#define CFG_STA_SAP_SCC_ON_DFS_CHAN_MAX (1)
#define CFG_STA_SAP_SCC_ON_DFS_CHAN_DEFAULT (0)
/*
* gEnableAggBTCScoOUI is used to enable aggregation during SCO
* with specific AP based on OUI. If set to nothing, feature is
* enabled for all APs. Ini supports only single OUI.
* ex: gEnableAggBTCScoOUI=74-EA-CB - enable with specific AP
*/
#define CFG_ENABLE_AGG_BTC_SCO_OUI_NAME "gEnableAggBTCScoOUI"
#define CFG_ENABLE_AGG_BTC_SCO_OUI_DEFAULT ""
/*
* gNumBuffBTCSco is used to set block ack buffer size for
* aggregation during SCO. If this is set to 0 or 1, aggregation
* during SCO feature is disabled. To enable aggregation
* during SCO, gNumBuffBTCSco should be set to be greater than 1.
*/
#define CFG_NUM_BUFF_BTC_SCO_INVALID 1
#define CFG_NUM_BUFF_BTC_SCO_NAME "gNumBuffBTCSco"
#define CFG_NUM_BUFF_BTC_SCO_MIN (0)
#define CFG_NUM_BUFF_BTC_SCO_MAX (10)
#define CFG_NUM_BUFF_BTC_SCO_DEFAULT (0)
/* Value for ENABLE_POWERSAVE_OFFLOAD*/
#define CFG_ENABLE_POWERSAVE_OFFLOAD_NAME "gEnablePowerSaveOffload"
#define CFG_ENABLE_POWERSAVE_OFFLOAD_MIN (1)
#define CFG_ENABLE_POWERSAVE_OFFLOAD_MAX (2)
#define CFG_ENABLE_POWERSAVE_OFFLOAD_DEFAULT (1)
/*
* <ini>
* force_rsne_override - force rsnie override from user
* @Min: 0
* @Max: 1
* @Default: 0
*
* This ini is used to enable/disable test mode to force rsne override used in
* security enhancement test cases to pass the RSNIE sent by user in
* assoc request.
*
* Related: None
*
* Supported Feature: STA
*
* Usage: internal
*
* </ini>
*/
#define CFG_FORCE_RSNE_OVERRIDE_NAME "force_rsne_override"
#define CFG_FORCE_RSNE_OVERRIDE_MIN (0)
#define CFG_FORCE_RSNE_OVERRIDE_MAX (1)
#define CFG_FORCE_RSNE_OVERRIDE_DEFAULT (0)
/*
* <ini>
* gEnabledefaultSAP - This will control the creation of default SAP
* interface
* @Default: NULL
*
* This ini is used for providing control to create a default SAP session
* along with the creation of wlan0 and p2p0. The name of the interface is
* specified as the parameter
*
* Usage: External
*
* </ini>
*/
#define CFG_ENABLE_DEFAULT_SAP "gEnabledefaultSAP"
#define CFG_ENABLE_DEFAULT_SAP_DEFAULT ""
/*
* <ini>
* sae_enabled - Enable/Disable SAE support in driver
* @Min: 0
* @Max: 1
* @Default: 1
*
* This ini is used to enable/disable SAE support in driver
* Driver will update config to supplicant based on this config.
*
* Related: None
*
* Supported Feature: SAE
* Usage: External
*
* </ini>
*/
#define CFG_IS_SAE_ENABLED_NAME "sae_enabled"
#define CFG_IS_SAE_ENABLED_DEFAULT (1)
#define CFG_IS_SAE_ENABLED_MIN (0)
#define CFG_IS_SAE_ENABLED_MAX (1)
/*---------------------------------------------------------------------------
Type declarations
-------------------------------------------------------------------------*/
typedef struct
{
//Bitmap to track what is explicitly configured
DECLARE_BITMAP(bExplicitCfg, MAX_CFG_INI_ITEMS);
//Config parameters
v_U32_t RTSThreshold;
v_U32_t FragmentationThreshold;
v_U32_t nCheckForHangTime;
v_U32_t Calibration;
v_U32_t CalibrationPeriod;
v_U8_t OperatingChannel;
v_BOOL_t ShortSlotTimeEnabled;
v_BOOL_t Is11dSupportEnabled;
v_BOOL_t Is11hSupportEnabled;
v_U32_t nDeferScanTimeInterval;
v_BOOL_t fEnforce11dChannels;
v_BOOL_t fSupplicantCountryCodeHasPriority;
v_BOOL_t fEnforceCountryCodeMatch;
v_BOOL_t fEnforceDefaultDomain;
v_U32_t Cfg1Id;
v_U32_t Cfg2Id;
v_U32_t Cfg3Id;
v_U32_t Cfg4Id;
v_U32_t Cfg5Id;
v_U32_t Cfg1Value;
v_U32_t Cfg2Value;
v_U32_t Cfg3Value;
v_U32_t Cfg4Value;
v_U32_t Cfg5Value;
v_U32_t HeartbeatThresh24;
char PowerUsageControl[4];
v_U8_t nEnableSuspend;
v_U8_t nEnableDriverStop;
v_BOOL_t fIsImpsEnabled;
v_BOOL_t fIsSsrPanicOnFailure;
v_BOOL_t fIsLogpEnabled;
v_U8_t btcExecutionMode;
v_U8_t btcConsBtSlotsToBlockDuringDhcp;
v_U8_t btcA2DPBtSubIntervalsDuringDhcp;
v_U32_t btcStaticLenInqBt;
v_U32_t btcStaticLenPageBt;
v_U32_t btcStaticLenConnBt;
v_U32_t btcStaticLenLeBt;
v_U32_t btcStaticLenInqWlan;
v_U32_t btcStaticLenPageWlan;
v_U32_t btcStaticLenConnWlan;
v_U32_t btcStaticLenLeWlan;
v_U32_t btcDynMaxLenBt;
v_U32_t btcDynMaxLenWlan;
v_U32_t btcMaxScoBlockPerc;
v_U32_t btcDhcpProtOnA2dp;
v_U32_t btcDhcpProtOnSco;
v_U32_t mwsCoexVictimWANFreq[10];
v_U32_t mwsCoexVictimWLANFreq[10];
v_U32_t mwsCoexVictimConfig[10];
v_U32_t mwsCoexVictimConfig2[10];
v_U32_t mwsCoexModemBackoff;
v_U32_t mwsCoexConfig[6];
v_U32_t SARPowerBackoff;
v_U32_t nImpsModSleepTime;
v_U32_t nImpsMaxSleepTime;
v_U32_t nImpsMinSleepTime;
v_BOOL_t fIsBmpsEnabled;
v_U32_t nBmpsModListenInterval;
v_U32_t nBmpsMaxListenInterval;
v_U32_t nBmpsMinListenInterval;
v_BOOL_t fIsAutoBmpsTimerEnabled;
v_U32_t nAutoBmpsTimerValue;
eHddDot11Mode dot11Mode;
v_U32_t nChannelBondingMode24GHz;
bool override_ht20_40_24g;
v_U32_t nChannelBondingMode5GHz;
v_U32_t MaxRxAmpduFactor;
v_U32_t nBAAgingTimerInterval;
v_U16_t TxRate;
v_U32_t AdaptiveThresholdAlgo;
v_U32_t ShortGI20MhzEnable;
v_U32_t BlockAckAutoSetup;
v_U32_t ScanResultAgeCount;
v_U32_t nScanAgeTimeNCNPS;
v_U32_t nScanAgeTimeNCPS;
v_U32_t nScanAgeTimeCNPS;
v_U32_t nScanAgeTimeCPS;
v_U8_t nRssiCatGap;
v_BOOL_t fIsShortPreamble;
v_BOOL_t fIsAutoIbssBssid;
v_MACADDR_t IbssBssid;
v_U32_t AdHocChannel5G;
v_U32_t AdHocChannel24G;
v_U8_t intfAddrMask;
v_MACADDR_t intfMacAddr[VOS_MAX_CONCURRENCY_PERSONA];
v_BOOL_t apUapsdEnabled;
v_BOOL_t apRandomBssidEnabled;
v_BOOL_t apProtEnabled;
v_U16_t apProtection;
v_BOOL_t apOBSSProtEnabled;
v_U8_t MinFramesProcThres;
v_U8_t apCntryCode[4];
v_BOOL_t apDisableIntraBssFwd;
v_U8_t nEnableListenMode;
v_U32_t nAPAutoShutOff;
v_U8_t apStartChannelNum;
v_U8_t apEndChannelNum;
v_U8_t apOperatingBand;
v_BOOL_t apAutoChannelSelection;
v_U8_t enableLTECoex;
v_U32_t apKeepAlivePeriod;
v_U32_t goKeepAlivePeriod;
v_U32_t apLinkMonitorPeriod;
v_U32_t goLinkMonitorPeriod;
v_U32_t nBeaconInterval;
v_U8_t nTxPowerCap; //In dBm
v_BOOL_t fIsLowGainOverride;
v_U8_t disablePacketFilter;
#if defined WLAN_FEATURE_VOWIFI
v_BOOL_t fRrmEnable;
v_U8_t nInChanMeasMaxDuration;
v_U8_t nOutChanMeasMaxDuration;
v_U16_t nRrmRandnIntvl;
#endif
#ifdef WLAN_FEATURE_VOWIFI_11R
//Vowifi 11r params
v_BOOL_t fFTResourceReqSupported;
#endif
v_BOOL_t gEnableRoamDelayStats;
#ifdef WLAN_FEATURE_NEIGHBOR_ROAMING
v_U16_t nNeighborScanPeriod;
v_U8_t nNeighborReassocRssiThreshold;
v_U8_t nNeighborLookupRssiThreshold;
v_U8_t neighborScanChanList[WNI_CFG_VALID_CHANNEL_LIST_LEN];
v_U16_t nNeighborScanMinChanTime;
v_U16_t nNeighborScanMaxChanTime;
v_U16_t nMaxNeighborReqTries;
v_U16_t nNeighborResultsRefreshPeriod;
v_U16_t nEmptyScanRefreshPeriod;
v_U8_t nNeighborInitialForcedRoamTo5GhEnable;
v_U8_t nWeakZoneRssiThresholdForRoam;
#endif
//Additional Handoff params
v_BOOL_t nEnableIdleScan;
v_U32_t nRoamingTime;
v_U16_t nVccRssiTrigger;
v_U32_t nVccUlMacLossThreshold;
v_U32_t nPassiveMinChnTime; //in units of milliseconds
v_U32_t nPassiveMaxChnTime; //in units of milliseconds
v_U32_t nActiveMinChnTime; //in units of milliseconds
v_U32_t nActiveMaxChnTime; //in units of milliseconds
v_U32_t nInitialDwellTime; //in units of milliseconds
uint32_t min_chntime_btc_esco; //in units of milliseconds
uint32_t max_chntime_btc_esco; //in units of milliseconds
uint32_t min_chntime_btc_sco;
uint32_t max_chntime_btc_sco;
#ifdef WLAN_AP_STA_CONCURRENCY
v_U32_t nPassiveMinChnTimeConc; //in units of milliseconds
v_U32_t nPassiveMaxChnTimeConc; //in units of milliseconds
v_U32_t nActiveMinChnTimeConc; //in units of milliseconds
v_U32_t nActiveMaxChnTimeConc; //in units of milliseconds
v_U32_t nRestTimeConc; //in units of milliseconds
v_U8_t nNumStaChanCombinedConc; //number of channels combined for
//STA in each split scan operation
v_U8_t nNumP2PChanCombinedConc; //number of channels combined for
//P2P in each split scan operation
#endif
v_U8_t nMaxPsPoll;
v_U8_t nRssiFilterPeriod;
v_BOOL_t fIgnoreDtim;
v_U8_t fMaxLIModulatedDTIM;
v_U8_t nRxAnt;
v_U8_t fEnableFwHeartBeatMonitoring;
v_U8_t fEnableFwBeaconFiltering;
v_BOOL_t fEnableFwRssiMonitoring;
v_U8_t nDataInactivityTimeout;
v_U8_t nthBeaconFilter;
//WMM QoS Configuration
hdd_wmm_user_mode_t WmmMode;
v_BOOL_t b80211eIsEnabled;
v_U8_t UapsdMask; // what ACs to setup U-APSD for at assoc
v_U32_t InfraUapsdVoSrvIntv;
v_U32_t InfraUapsdVoSuspIntv;
v_U32_t InfraUapsdViSrvIntv;
v_U32_t InfraUapsdViSuspIntv;
v_U32_t InfraUapsdBeSrvIntv;
v_U32_t InfraUapsdBeSuspIntv;
v_U32_t InfraUapsdBkSrvIntv;
v_U32_t InfraUapsdBkSuspIntv;
#ifdef FEATURE_WLAN_LFR
v_BOOL_t isFastRoamIniFeatureEnabled;
v_BOOL_t MAWCEnabled;
#endif
#ifdef FEATURE_WLAN_ESE
v_U32_t InfraInactivityInterval;
v_BOOL_t isEseIniFeatureEnabled;
#endif
#if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR)
v_BOOL_t isFastTransitionEnabled;
v_U8_t RoamRssiDiff;
v_U8_t nImmediateRoamRssiDiff;
v_BOOL_t isWESModeEnabled;
#endif
#ifdef FEATURE_WLAN_OKC
v_BOOL_t isOkcIniFeatureEnabled;
#endif
#ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD
v_BOOL_t isRoamOffloadScanEnabled;
v_BOOL_t isPERRoamEnabled;
v_BOOL_t isPERRoamRxPathEnabled;
v_BOOL_t isPERRoamCCAEnabled;
v_S15_t PERRoamFullScanThreshold;
v_S15_t PERMinRssiThresholdForRoam;
v_U16_t rateUpThreshold;
v_U16_t rateDownThreshold;
v_U16_t PERroamTriggerPercent;
v_U32_t waitPeriodForNextPERScan;
v_U32_t PERtimerThreshold;
v_U32_t PERroamRxPktsThreshold;
#endif
#ifdef WLAN_FEATURE_LFR_MBB
tANI_BOOLEAN enable_lfr_mbb;
#endif
hdd_wmm_classification_t PktClassificationBasis; // DSCP or 802.1Q
v_BOOL_t bImplicitQosEnabled;
/* default TSPEC parameters for AC_VO */
sme_QosWmmDirType InfraDirAcVo;
v_U16_t InfraNomMsduSizeAcVo;
v_U32_t InfraMeanDataRateAcVo;
v_U32_t InfraMinPhyRateAcVo;
v_U16_t InfraSbaAcVo;
/* default TSPEC parameters for AC_VI */
sme_QosWmmDirType InfraDirAcVi;
v_U16_t InfraNomMsduSizeAcVi;
v_U32_t InfraMeanDataRateAcVi;
v_U32_t InfraMinPhyRateAcVi;
v_U16_t InfraSbaAcVi;
/* default TSPEC parameters for AC_BE */
sme_QosWmmDirType InfraDirAcBe;
v_U16_t InfraNomMsduSizeAcBe;
v_U32_t InfraMeanDataRateAcBe;
v_U32_t InfraMinPhyRateAcBe;
v_U16_t InfraSbaAcBe;
/* default TSPEC parameters for AC_BK */
sme_QosWmmDirType InfraDirAcBk;
v_U16_t InfraNomMsduSizeAcBk;
v_U32_t InfraMeanDataRateAcBk;
v_U32_t InfraMinPhyRateAcBk;
v_U16_t InfraSbaAcBk;
/* TL related configuration */
v_U8_t WfqBkWeight;
v_U8_t WfqBeWeight;
v_U8_t WfqViWeight;
v_U8_t WfqVoWeight;
v_U32_t DelayedTriggerFrmInt;
v_U16_t BkReorderAgingTime;
v_U16_t BeReorderAgingTime;
v_U16_t ViReorderAgingTime;
v_U16_t VoReorderAgingTime;
v_BOOL_t enablePNReplay;
/* Wowl pattern */
char wowlPattern[1024];
/* Control for Replay counetr. value 1 means
single replay counter for all TID*/
v_BOOL_t bSingleTidRc;
v_U8_t mcastBcastFilterSetting;
v_BOOL_t fhostArpOffload;
v_BOOL_t fhostNSOffload;
v_BOOL_t burstSizeDefinition;
v_U8_t tsInfoAckPolicy;
/* RF Settling Time Clock */
v_U32_t rfSettlingTimeUs;
v_U8_t enableBtAmp;
#ifdef WLAN_BTAMP_FEATURE
v_U8_t preferredChannel;
#endif //WLAN_BTAMP_FEATURE
v_U8_t dynamicPsPollValue;
v_BOOL_t AddTSWhenACMIsOff;
v_BOOL_t fValidateScanList;
v_U32_t infraStaKeepAlivePeriod;
v_U8_t nNullDataApRespTimeout;
v_U8_t nBandCapability;
v_U32_t apDataAvailPollPeriodInMs;
v_BOOL_t fEnableBeaconEarlyTermination;
v_BOOL_t teleBcnWakeupEn;
/* VOS Trace Control*/
v_U16_t vosTraceEnableBAP;
v_U16_t vosTraceEnableTL;
v_U16_t vosTraceEnableWDI;
v_U16_t vosTraceEnableHDD;
v_U16_t vosTraceEnableSME;
v_U16_t vosTraceEnablePE;
v_U16_t vosTraceEnablePMC;
v_U16_t vosTraceEnableWDA;
v_U16_t vosTraceEnableSYS;
v_U16_t vosTraceEnableVOSS;
v_U16_t vosTraceEnableSAP;
v_U16_t vosTraceEnableHDDSAP;
/* WDI Trace Control */
v_U32_t wdiTraceEnableDAL;
v_U32_t wdiTraceEnableCTL;
v_U32_t wdiTraceEnableDAT;
v_U32_t wdiTraceEnablePAL;
v_U16_t nTeleBcnTransListenInterval;
v_U16_t nTeleBcnMaxListenInterval;
v_U16_t nTeleBcnTransLiNumIdleBeacons;
v_U16_t nTeleBcnMaxLiNumIdleBeacons;
v_U8_t bcnEarlyTermWakeInterval;
v_U32_t enableCloseLoop;
v_U8_t enableBypass11d;
v_U8_t enableDFSChnlScan;
v_U8_t enableDFSPnoChnlScan;
v_U8_t enableDynamicDTIM;
v_U8_t enableAutomaticTxPowerControl;
v_U8_t ShortGI40MhzEnable;
eHddLinkSpeedReportType reportMaxLinkSpeed;
v_S31_t linkSpeedRssiHigh;
#if defined (WLAN_FEATURE_VOWIFI_11R) || defined (FEATURE_WLAN_ESE) || defined(FEATURE_WLAN_LFR)
v_BOOL_t nRoamPrefer5GHz;
v_BOOL_t nRoamIntraBand;
v_U8_t nProbes;
v_U16_t nRoamScanHomeAwayTime;
#endif
v_S31_t linkSpeedRssiMid;
v_S31_t linkSpeedRssiLow;
v_U8_t enableMCC;
v_U8_t allowMCCGODiffBI;
v_BOOL_t isP2pDeviceAddrAdministrated;
v_U8_t thermalMitigationEnable;
#ifdef WLAN_FEATURE_11AC
v_U8_t vhtChannelWidth;
v_U8_t vhtRxMCS;
v_U8_t vhtTxMCS;
v_BOOL_t enableTxBF;
v_U8_t txBFCsnValue;
v_BOOL_t enableMuBformee;
v_U8_t gVhtMaxAmpduLenExp;
#endif
v_U8_t enableModulatedDTIM;
v_U32_t fEnableMCAddrList;
v_BOOL_t enableFirstScan2GOnly;
v_BOOL_t skipDfsChnlInP2pSearch;
v_BOOL_t ignoreDynamicDtimInP2pMode;
v_U16_t configMccParam;
v_U32_t numBuffAdvert;
v_BOOL_t enableRxSTBC;
#ifdef FEATURE_WLAN_TDLS
v_BOOL_t fEnableTDLSSupport;
v_BOOL_t fEnableTDLSImplicitTrigger;
v_U32_t fTDLSTxStatsPeriod;
v_U32_t fTDLSTxPacketThreshold;
v_U32_t fTDLSDiscoveryPeriod;
v_U32_t fTDLSMaxDiscoveryAttempt;
v_U32_t fTDLSIdleTimeout;
v_U32_t fTDLSIdlePacketThreshold;
v_U32_t fTDLSRSSIHysteresis;
v_S31_t fTDLSRSSITriggerThreshold;
v_S31_t fTDLSRSSITeardownThreshold;
v_U32_t fTDLSUapsdMask; // what ACs to setup U-APSD for TDLS
v_U32_t fEnableTDLSBufferSta;
v_U32_t fTDLSPuapsdInactivityTimer;
v_U32_t fTDLSRxFrameThreshold;
v_BOOL_t fTDLSExternalControl;
v_U32_t fEnableTDLSOffChannel;
v_U32_t fEnableTDLSWmmMode;
v_BOOL_t fEnableTDLSScanCoexSupport;
v_BOOL_t fEnableTDLSScan;
#endif
#ifdef WLAN_FEATURE_LINK_LAYER_STATS
v_BOOL_t fEnableLLStats;
#endif
#ifdef WLAN_FEATURE_EXTSCAN
v_BOOL_t fEnableEXTScan;
#endif
#ifdef WLAN_SOFTAP_VSTA_FEATURE
v_BOOL_t fEnableVSTASupport;
#endif
#ifdef WLAN_ACTIVEMODE_OFFLOAD_FEATURE
v_BOOL_t fEnableActiveModeOffload;
#endif
v_U32_t enableLpwrImgTransition;
v_U32_t enable_conc_bmiss;
v_U32_t enable_units_bwait;
v_U8_t scanAgingTimeout;
v_BOOL_t enableTxLdpc;
v_U8_t disableLDPCWithTxbfAP;
v_U8_t enableMCCAdaptiveScheduler;
v_BOOL_t isAndroidPsEn;
v_BOOL_t sapAllowAllChannel;
v_U8_t retryLimitZero;
v_U8_t retryLimitOne;
v_U8_t retryLimitTwo;
v_U8_t disableAggWithBtc;
char listOfNonDfsCountryCode[128];
v_BOOL_t enableSSR;
char listOfNon11acCountryCode[128];
v_U32_t cfgMaxMediumTime;
v_U8_t enableTrafficMonitor;
v_U32_t trafficIdleTimeout;
v_BOOL_t enableVhtFor24GHzBand;
v_U8_t fScanOffload;
#ifdef WLAN_FEATURE_ROAM_SCAN_OFFLOAD
/* Flag indicating whether legacy fast roam during concurrency is enabled in cfg.ini or not */
v_BOOL_t bFastRoamInConIniFeatureEnabled;
#endif
v_BOOL_t fEnableAdaptRxDrain;
//TX and RX traffic threshold for split scan
v_U8_t txRxThresholdForSplitScan;
v_U8_t dynSplitscan; //Enable/Disable dynamic
//splitscan
//Traffic monitor timer for split scan
v_U32_t trafficMntrTmrForSplitScan;
v_U8_t flexConnectPowerFactor;
v_BOOL_t enableIbssHeartBeatOffload;
v_U32_t antennaDiversity;
v_BOOL_t fEnableSNRMonitoring;
/*PNO related parameters */
#ifdef FEATURE_WLAN_SCAN_PNO
v_BOOL_t configPNOScanSupport;
v_U32_t configPNOScanTimerRepeatValue;
#endif
v_U8_t isAmsduSupportInAMPDU;
v_U8_t nSelect5GHzMargin;
v_U8_t isCoalesingInIBSSAllowed;
v_BOOL_t cfgAthDisable;
v_U32_t cfgBtcActiveWlanLen;
v_U32_t cfgBtcActiveBtLen;
v_U32_t cfgBtcSapActiveWlanLen;
v_U32_t cfgBtcSapActiveBtLen;
#ifdef MEMORY_DEBUG
v_BOOL_t IsMemoryDebugSupportEnabled;
#endif
char overrideCountryCode[4];
v_U32_t gAsdProbeInterval;
v_S7_t gAsdTriggerThreshold;
v_U32_t gAsdRTTRssiHystThreshold;
v_BOOL_t debugP2pRemainOnChannel;
v_U32_t cfgBtcCTS2SduringSCO;
v_U32_t gEnableDebugLog;
v_U16_t nOBSSScanActiveDwellTime;
v_U16_t nOBSSScanPassiveDwellTime;
v_U16_t nOBSSScanWidthTriggerInterval;
v_BOOL_t gEnableStrictRegulatoryForFCC;
v_BOOL_t advertiseConcurrentOperation;
v_U32_t defaultRateIndex24Ghz;
v_BOOL_t sapEnable11AC;
v_BOOL_t cfgRAFilterEnable;
v_U16_t cfgRARateLimitInterval;
v_U8_t allowDFSChannelRoam;
#ifdef WLAN_LOGGING_SOCK_SVC_ENABLE
//WLAN Logging
v_U32_t wlanLoggingEnable;
v_U32_t wlanLoggingFEToConsole;
v_U32_t wlanLoggingNumBuf;
v_U32_t wlanPerPktStatsLogEnable;
v_U32_t wlanPerPktStatsNumBuf;
#endif
v_BOOL_t ignorePeerErpInfo;
v_BOOL_t initialScanSkipDFSCh;
v_U32_t cfgBtcFatalHidnSniffBlkGuidance;
v_U32_t cfgBtcCriticalHidnSniffBlkGuidance;
v_U32_t cfgBtcA2dpTxQueueThold;
v_U32_t cfgBtcOppTxQueueThold;
v_U32_t tcpDelAckComputeInterval;
v_U32_t tcpDelAckThresholdHigh;
v_U32_t tcpDelAckThresholdLow;
#ifdef WLAN_FEATURE_11W
v_U32_t pmfSaQueryMaxRetries;
v_U32_t pmfSaQueryRetryInterval;
#endif
v_U32_t deferImpsTime;
v_BOOL_t sendDeauthBeforeCon;
v_U8_t enableMacSpoofing;
v_BOOL_t disableP2PMacSpoofing;
v_BOOL_t enableFatalEvent;
v_BOOL_t enableMgmtLogging;
v_BOOL_t enableBMUHWtracing;
v_BOOL_t enableFWLogging;
v_BOOL_t enableContFWLogging;
v_U8_t minLoggingBufferSize;
v_U8_t maxLoggingBufferSize;
v_BOOL_t fenableCHAvoidance;
v_U8_t gMaxConcurrentActiveSessions;
v_U32_t enableDynamicWMMPS;
v_U32_t maxUapsdConsecSP;
v_U32_t maxUapsdConsecRxCnt;
v_U32_t maxUapsdConsecTxCnt;
v_U32_t uapsdConsecRxCntMeasWindow;
v_U32_t uapsdConsecTxCntMeasWindow;
v_U32_t maxPsPollInWmmUapsdMode;
v_U32_t maxUapsdInactivityIntervals;
v_U32_t burstModeTXOPValue;
v_U8_t acsScanBandPreference;
v_U16_t acsBandSwitchThreshold;
v_U32_t enableDynamicRAStartRate;
v_U32_t enableRtsCtsHtVht;
#ifdef WLAN_FEATURE_AP_HT40_24G
v_BOOL_t apHT40_24GEnabled;
#endif
v_U16_t gP2PListenDeferInterval;
v_U8_t btcEnableIndTimerVal;
v_U8_t btcFastWlanConnPref;
v_U32_t dxeReplenishRXTimerVal;
v_U32_t dxeSSREnable;
v_U8_t multicast_host_msgs;
v_BOOL_t toggleArpBDRates;
v_U32_t btcStaticOppWlanIdleWlanLen;
v_U32_t btcStaticOppWlanIdleBtLen;
v_U32_t btc_disable_wlan_link_critical;
v_U32_t linkFailTimeout;
v_U32_t linkFailTxCnt;
v_BOOL_t ignorePeerHTopMode;
v_U8_t gOptimizeCAevent;
v_BOOL_t enableFwrMemDump;
v_U8_t gActivePassiveChCon;
v_U32_t cfgExtScanConcMode;
v_U16_t rps_mask;
v_BOOL_t fEnableWifiConfig;
v_BOOL_t crash_inject_enabled;
v_U32_t enable_delack;
v_BOOL_t disableBarWakeUp;
v_U8_t max_chan_for_dwell_time_cfg;
v_U16_t tdls_enable_defer_time;
v_U8_t boffset_correction_enable;
#ifdef DHCP_SERVER_OFFLOAD
v_BOOL_t enable_dhcp_srv_offload;
v_U32_t dhcp_max_num_clients;
v_U8_t dhcp_srv_ip[IPADDR_STRING_LENGTH];
v_U8_t dhcp_start_lsb;
#endif /* DHCP_SERVER_OFFLOAD */
#ifdef MDNS_OFFLOAD
uint32_t enable_mdns_offload;
uint8_t mdns_fqdn[MAX_MDNS_FQDN_LEN];
uint8_t mdns_uniquefqdn[MAX_MDNS_FQDN_LEN];
uint8_t mdns_resp_type_a[MAX_MDNS_RESP_LEN];
uint32_t mdns_resp_type_a_ipv4;
uint8_t mdns_resp_type_txt[MAX_MDNS_RESP_LEN];
uint8_t mdns_resp_type_txt_content[MAX_MDNS_RESP_LEN];
uint8_t mdns_resp_type_ptr[MAX_MDNS_RESP_LEN];
uint8_t mdns_resp_type_ptr_dname[MAX_MDNS_RESP_LEN];
uint8_t mdns_resp_type_srv[MAX_MDNS_RESP_LEN];
uint16_t mdns_resp_type_srv_priority;
uint16_t mdns_resp_type_srv_weight;
uint16_t mdns_resp_type_srv_port;
uint8_t mdns_resp_type_srv_target[MAX_MDNS_RESP_LEN];
#endif /* MDNS_OFFLOAD */
uint32_t enable_edca_params;
uint32_t edca_vo_cwmin;
uint32_t edca_vi_cwmin;
uint32_t edca_bk_cwmin;
uint32_t edca_be_cwmin;
uint32_t edca_vo_cwmax;
uint32_t edca_vi_cwmax;
uint32_t edca_bk_cwmax;
uint32_t edca_be_cwmax;
uint32_t edca_vo_aifs;
uint32_t edca_vi_aifs;
uint32_t edca_bk_aifs;
uint32_t edca_be_aifs;
v_BOOL_t sendMgmtPktViaWQ5;
v_BOOL_t sap_probe_resp_offload;
v_BOOL_t disable_scan_during_sco;
v_BOOL_t sap_internal_restart;
#ifdef SAP_AUTH_OFFLOAD
bool enable_sap_auth_offload;
uint32_t sap_auth_offload_sec_type;
uint8_t sap_auth_offload_key[WLAN_PSK_STRING_LENGTH];
#endif /* SAP_AUTH_OFFLOAD */
uint32_t max_sched_scan_plan_interval;
uint32_t max_sched_scan_plan_iterations;
uint32_t sta_auth_retries_for_code17;
uint32_t trigger_nullframe_before_hb;
bool force_scc_with_ecsa;
uint8_t enable_rtt_support;
uint32_t sta_sap_scc_on_dfs_chan;
uint8_t enable_aggr_btc_sco_oui[9];
uint8_t num_buff_aggr_btc_sco;
/* control marking indoor channel passive to disable */
bool disable_indoor_channel;
uint32_t enable_power_save_offload;
uint32_t btc_dyn_wlan_len;
uint32_t btc_dyn_bt_len;
uint32_t btc_dyn_bt_ext_len;
uint32_t btc_dyn_num_bt_ext;
bool indoor_channel_support;
bool force_rsne_override;
char enabledefaultSAP[CFG_CONCURRENT_IFACE_MAX_LEN];
#ifdef WLAN_FEATURE_SAE
bool is_sae_enabled;
#endif
} hdd_config_t;
/*---------------------------------------------------------------------------
Function declarations and documenation
-------------------------------------------------------------------------*/
VOS_STATUS hdd_parse_config_ini(hdd_context_t *pHddCtx);
VOS_STATUS hdd_set_sme_config( hdd_context_t *pHddCtx );
v_BOOL_t hdd_update_config_dat ( hdd_context_t *pHddCtx );
VOS_STATUS hdd_cfg_get_config(hdd_context_t *pHddCtx, char *pBuf, int buflen);
eCsrPhyMode hdd_cfg_xlate_to_csr_phy_mode( eHddDot11Mode dot11Mode );
VOS_STATUS hdd_execute_config_command(hdd_context_t *pHddCtx, char *command);
tANI_BOOLEAN hdd_is_okc_mode_enabled(hdd_context_t *pHddCtx);
VOS_STATUS hdd_string_to_u8_array(char *str, tANI_U8 *intArray, tANI_U8 *len,
tANI_U8 intArrayMaxLen, char *seperator,
bool to_hex);
#ifdef MDNS_OFFLOAD
int hdd_string_to_string_array(char *data, uint8_t *datalist,
char separator, uint8_t *num_entries,
uint8_t max_entries,
uint8_t max_len_entry);
#endif /* MDNS_OFFLOAD */
#define VAR_OFFSET( _Struct, _Var ) (offsetof(_Struct, _Var))
#define VAR_SIZE( _Struct, _Var ) (sizeof(((_Struct *)0)->_Var))
#define VAR_FLAGS_NONE ( 0 )
#define VAR_FLAGS_REQUIRED ( 1 << 0 ) // bit 0 is Required or Optional
#define VAR_FLAGS_OPTIONAL ( 0 << 0 )
#define VAR_FLAGS_RANGE_CHECK ( 1 << 1 ) // bit 1 tells if range checking is required.
// If less than MIN, assume MIN.
// If greater than MAX, assume MAX.
#define VAR_FLAGS_RANGE_CHECK_ASSUME_MINMAX ( VAR_FLAGS_RANGE_CHECK )
#define VAR_FLAGS_RANGE_CHECK_ASSUME_DEFAULT ( 1 << 2 ) // bit 2 is range checking that assumes the DEFAULT value
// If less than MIN, assume DEFAULT,
// If grateer than MAX, assume DEFAULT.
#define VAR_FLAGS_DYNAMIC_CFG ( 1 << 3 ) // Bit 3 indicates that
// the config item can be
// modified dynamicially
// on a running system
typedef enum
{
WLAN_PARAM_Integer,
WLAN_PARAM_SignedInteger,
WLAN_PARAM_HexInteger,
WLAN_PARAM_String,
WLAN_PARAM_MacAddr,
}WLAN_PARAMETER_TYPE;
#define REG_VARIABLE( _Name, _Type, _Struct, _VarName, \
_Flags, _Default, _Min, _Max ) \
{ \
( _Name ), \
( _Type ), \
( _Flags ), \
VAR_OFFSET( _Struct, _VarName ), \
VAR_SIZE( _Struct, _VarName ), \
( _Default ), \
( _Min ), \
( _Max ), \
NULL, \
0 \
}
#define REG_DYNAMIC_VARIABLE( _Name, _Type, _Struct, _VarName, \
_Flags, _Default, _Min, _Max, \
_CBFunc, _CBParam ) \
{ \
( _Name ), \
( _Type ), \
( VAR_FLAGS_DYNAMIC_CFG | ( _Flags ) ), \
VAR_OFFSET( _Struct, _VarName ), \
VAR_SIZE( _Struct, _VarName ), \
( _Default ), \
( _Min ), \
( _Max ), \
( _CBFunc ), \
( _CBParam ) \
}
#define REG_VARIABLE_STRING( _Name, _Type, _Struct, _VarName, \
_Flags, _Default ) \
{ \
( _Name ), \
( _Type ), \
( _Flags ), \
VAR_OFFSET( _Struct, _VarName ), \
VAR_SIZE( _Struct, _VarName ), \
(unsigned long)( _Default ), \
0, \
0, \
NULL, \
0 \
}
typedef struct tREG_TABLE_ENTRY {
char* RegName; // variable name in the qcom_cfg.ini file
WLAN_PARAMETER_TYPE RegType; // variable type in the hdd_config_t structure
unsigned long Flags; // Specify optional parms and if RangeCheck is performed
unsigned short VarOffset; // offset to field from the base address of the structure
unsigned short VarSize; // size (in bytes) of the field
unsigned long VarDefault; // default value to use
unsigned long VarMin; // minimum value, for range checking
unsigned long VarMax; // maximum value, for range checking
// Dynamic modification notifier
void (*pfnDynamicNotify)(hdd_context_t *pHddCtx, unsigned long NotifyId);
unsigned long NotifyId; // Dynamic modification identifier
} REG_TABLE_ENTRY;
static __inline unsigned long utilMin( unsigned long a, unsigned long b )
{
return( ( a < b ) ? a : b );
}
#endif