| /* |
| * Copyright (c) 2012-2013, 2017 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| /*=========================================================================== |
| |
| b a p A p i S t a t u s . C |
| |
| OVERVIEW: |
| |
| This software unit holds the implementation of the WLAN BAP modules |
| Status functions. |
| |
| The functions externalized by this module are to be called ONLY by other |
| WLAN modules (HDD) that properly register with the BAP Layer initially. |
| |
| DEPENDENCIES: |
| |
| Are listed for each API below. |
| |
| |
| ===========================================================================*/ |
| |
| /*=========================================================================== |
| |
| EDIT HISTORY FOR FILE |
| |
| |
| This section contains comments describing changes made to the module. |
| Notice that changes are listed in reverse chronological order. |
| |
| |
| $Header: /cygdrive/d/Builds/M7201JSDCAAPAD52240B/WM/platform/msm7200/Src/Drivers/SD/ClientDrivers/WLAN/QCT_BTAMP_RSN/CORE/BAP/src/bapApiStatus.c,v 1.7 2009/03/09 08:45:04 jzmuda Exp jzmuda $$DateTime$$Author: jzmuda $ |
| |
| |
| when who what, where, why |
| ---------- --- -------------------------------------------------------- |
| 2008-09-15 jez Created module |
| |
| ===========================================================================*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Include Files |
| * -------------------------------------------------------------------------*/ |
| //#include "wlan_qct_tl.h" |
| #include "vos_trace.h" |
| |
| /* BT-AMP PAL API header file */ |
| #include "bapApi.h" |
| #include "bapInternal.h" |
| |
| //#define BAP_DEBUG |
| /*---------------------------------------------------------------------------- |
| * Preprocessor Definitions and Constants |
| * -------------------------------------------------------------------------*/ |
| |
| |
| /*---------------------------------------------------------------------------- |
| * Type Declarations |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Global Data Definitions |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Static Variable Definitions |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Static Function Declarations and Definitions |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Externalized Function Definitions |
| * -------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------- |
| * Function Declarations and Documentation |
| * -------------------------------------------------------------------------*/ |
| |
| /* |
| Status Parameters |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadFailedContactCounter() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Failed Contact Counter command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIReadFailedContactCounter: pointer to the "HCI Read Failed Contact Counter" structure. |
| pFailedContactCounter: pointer to return value for the "Failed Contact Counter" |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadFailedContactCounter or |
| pFailedContactCounter is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadFailedContactCounter |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Read_Failed_Contact_Counter_Cmd *pBapHCIReadFailedContactCounter, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including "Read" Command Complete*/ |
| ) |
| { |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadFailedContactCounter */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPResetFailedContactCounter() |
| |
| DESCRIPTION |
| Implements the actual HCI Reset Failed Contact Counter command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIResetFailedContactCounter: pointer to the "HCI Reset Failed Contact Counter" structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIResetFailedContactCounter is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPResetFailedContactCounter |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Reset_Failed_Contact_Counter_Cmd *pBapHCIResetFailedContactCounter, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPResetFailedContactCounter */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadLinkQuality() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Link Quality command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIReadLinkQuality: pointer to the "HCI Read Link Quality" structure. |
| pBapHCILinkQuality: pointer to return value for the "Link Quality" |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadLinkQuality or |
| pBapHCILinkQuality is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadLinkQuality |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Read_Link_Quality_Cmd *pBapHCIReadLinkQuality, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| v_U8_t phyLinkHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %pK", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIReadLinkQuality) || |
| (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Validate the physical link handle extracted from |
| input parameter. This parameter has 2 bytes for physical handle |
| (only lower byte valid) */ |
| phyLinkHandle = (v_U8_t) pBapHCIReadLinkQuality->log_link_handle; |
| |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Quality.log_link_handle |
| = phyLinkHandle; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Quality.link_quality = 0; |
| |
| if (phyLinkHandle != btampContext->phy_link_handle) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid Physical link handle in %s", __func__); |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Quality.status |
| = WLANBAP_ERROR_INVALID_HCI_CMND_PARAM; |
| } |
| else |
| { |
| /* Get the Link quality indication status from control block. |
| Link quality value is being updated on the SME callback */ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Quality.link_quality |
| = btampContext->link_quality; |
| |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Link_Quality.status |
| = WLANBAP_STATUS_SUCCESS; |
| } |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_READ_LINK_QUALITY_CMD; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadLinkQuality */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadRSSI() |
| |
| DESCRIPTION |
| Implements the actual HCI Read RSSI command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIReadRSSI: pointer to the "HCI Read RSSI" structure. |
| pBapHCIRSSI: pointer to return value for the "RSSI". |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadRSSI or |
| pBapHCIRSSI is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadRSSI |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Read_RSSI_Cmd *pBapHCIReadRSSI, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| VOS_STATUS vosStatus; |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; |
| v_U8_t phyLinkHandle; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: btampHandle value: %pK", __func__, btampHandle); |
| |
| /* Validate params */ |
| if ((NULL == btampHandle) || (NULL == pBapHCIReadRSSI) || |
| (NULL == pBapHCIEvent)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid input parameters in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Validate the physical link handle extracted from |
| input parameter. This parameter has 2 bytes for physical handle |
| (only lower byte valid) */ |
| phyLinkHandle = (v_U8_t) pBapHCIReadRSSI->log_link_handle; |
| |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_RSSI.phy_link_handle |
| = phyLinkHandle; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_RSSI.rssi = 0; |
| |
| if (phyLinkHandle != btampContext->phy_link_handle) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "Invalid Physical link handle in %s", __func__); |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_RSSI.status |
| = WLANBAP_ERROR_INVALID_HCI_CMND_PARAM; |
| } |
| else |
| { |
| /* Get the RSSI value for this station (physical link) */ |
| vosStatus = WLANTL_GetRssi(btampContext->pvosGCtx, btampContext->ucSTAId, |
| &pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_RSSI.rssi); |
| |
| if (VOS_STATUS_SUCCESS == vosStatus) |
| { |
| /* GetRssi success, indicate the to upper layer */ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_RSSI.status |
| = WLANBAP_STATUS_SUCCESS; |
| } |
| else |
| { |
| /* API failed, indicate unspecified error to upper layer */ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_RSSI.status |
| = WLANBAP_ERROR_UNSPECIFIED_ERROR; |
| } |
| } |
| |
| /* Fill in the parameters for command complete event... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = TRUE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_READ_RSSI_CMD; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadRSSI */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadLocalAMPInfo() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Local AMP Information command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIReadLocalAMPInfo: pointer to the "HCI Read Local AMP Info" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadLocalAMPInfo or |
| pBapHCILocalAMPInfo is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadLocalAMPInfo |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Read_Local_AMP_Information_Cmd *pBapHCIReadLocalAMPInfo, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| /* Validate params */ |
| if (btampHandle == NULL) { |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| /* Validate params */ |
| if (pBapHCIReadLocalAMPInfo == NULL) { |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, "%s: btampHandle value: %pK", __func__, btampHandle); |
| |
| |
| /* Format the command complete event to return... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_READ_LOCAL_AMP_INFORMATION_CMD; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.status |
| = WLANBAP_STATUS_SUCCESS; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_AMP_Status |
| = WLANBAP_HCI_AMP_STATUS_NOT_SHARED; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_Total_BW |
| = 24000; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_Max_Guaranteed_BW |
| = 12000; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_Min_Latency |
| = 100; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_Max_PDU_Size |
| = WLANBAP_MAX_80211_PAL_PDU_SIZE; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_Controller_Type |
| = 1; |
| #if 0 |
| AMP Info PAL_Capabilities: Size: 2 Octets |
| |
| Value Parameter Description |
| 0xXXXX Bit 0: "Service Type = Guaranteed" is not supported by PAL = 0 |
| "Service Type = Guaranteed" is supported by PAL = 1 |
| Bits 15-1: Reserved (shall be set to 0) |
| (See EFS in Generic AMP FIPD [1]) |
| #endif //0 |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_PAL_Capabilities |
| = 0x00; // was 0x03. Completely wrong. |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_AMP_Assoc_Length |
| = 248; |
| //= 40; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_Max_Flush_Timeout |
| = 10000; //10; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Local_AMP_Info.HC_BE_Flush_Timeout |
| = 10000; //8; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadLocalAMPInfo */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPReadLocalAMPAssoc() |
| |
| DESCRIPTION |
| Implements the actual HCI Read Local AMP Assoc command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIReadLocalAMPAssoc: pointer to the "HCI Read Local AMP Assoc" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIReadLocalAMPAssoc |
| (or pBapHCILocalAMPAssoc) is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPReadLocalAMPAssoc |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Read_Local_AMP_Assoc_Cmd *pBapHCIReadLocalAMPAssoc, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| VOS_STATUS vosStatus; |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; /* btampContext value */ |
| tHalHandle hHal; |
| tBtampAMP_ASSOC btamp_ASSOC; |
| v_U32_t nConsumed = 0; |
| /*- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/ |
| |
| |
| /* Validate params */ |
| if ((pBapHCIReadLocalAMPAssoc == NULL) || (NULL == btampHandle)) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_ERROR, |
| "param is NULL in %s", __func__); |
| |
| return VOS_STATUS_E_FAULT; |
| } |
| hHal = VOS_GET_HAL_CB(btampContext->pvosGCtx); |
| if (NULL == hHal) |
| { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_ERROR, |
| "hHal is NULL in %s", __func__); |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, "%s: btampHandle value: %pK", __func__, btampHandle); |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "In %s, phy_link_handle = %d", __func__, |
| pBapHCIReadLocalAMPAssoc->phy_link_handle); |
| |
| /* Update the MAC address and SSID if in case the Read Local AMP Assoc |
| * Request is made before Create Physical Link creation. |
| */ |
| WLANBAP_ReadMacConfig (btampContext); |
| |
| /* Fill in the contents of an AMP_Assoc structure in preparation |
| * for Packing it into the AMP_assoc_fragment field of the Read |
| * Local AMP Assoc Command Complete Event |
| */ |
| /* Return the local MAC address */ |
| btamp_ASSOC.AMP_Assoc_MAC_Addr.present = 1; |
| vos_mem_copy( |
| btamp_ASSOC.AMP_Assoc_MAC_Addr.mac_addr, |
| btampContext->self_mac_addr, |
| sizeof(btampContext->self_mac_addr)); |
| |
| /*Save the local AMP assoc info*/ |
| vos_mem_copy(btampContext->btamp_AMP_Assoc.HC_mac_addr, |
| btampContext->self_mac_addr, |
| sizeof(btampContext->self_mac_addr)); |
| |
| |
| /* JEZ090303: This logic should return a single channel list with the */ |
| /* selected channel, if we have one. */ |
| //if (btampContext->channel) |
| if (1) |
| { |
| /* Return the local Preferred Channel List */ |
| /* Return both the Regulatory Info and one channel list */ |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.present = 1; |
| vos_mem_copy (btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.country, "XXX", 3); |
| /*Save the local AMP assoc info*/ |
| vos_mem_copy(btampContext->btamp_AMP_Assoc.HC_pref_country, "XXX", 3); |
| |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.num_triplets = 2; |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[0][0] = 201; |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[0][1] = 254; |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[0][2] = 0; |
| |
| if (( BT_INITIATOR == btampContext->BAPDeviceRole ) && |
| ( 0 != btampContext->channel )) |
| { |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][0] = btampContext->channel; |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][1] = 0x01; //we are AP - we start on their 1st preferred channel |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][2] = 0x11; |
| } |
| else |
| { |
| if (btampContext->config.ucPreferredChannel) |
| { |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][0] = btampContext->config.ucPreferredChannel; |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][1] = |
| 0x0B - btampContext->config.ucPreferredChannel + 1; |
| } |
| else |
| { |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][0] = 0x01; |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][1] = 0x0B; //all channels for 1 to 11 |
| } |
| |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][2] = 0x11; |
| } |
| } else |
| { |
| /* Return the local Preferred Channel List */ |
| /* Return only the Regulatory Info */ |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.present = 1; |
| vos_mem_copy (btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.country, "XXX", 3); |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.num_triplets = 1; |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[0][0] = 201; |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[0][1] = 254; |
| btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[0][2] = 0; |
| |
| } |
| |
| /*Save the local AMP assoc info*/ |
| btampContext->btamp_AMP_Assoc.HC_pref_num_triplets = btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.num_triplets; |
| btampContext->btamp_AMP_Assoc.HC_pref_triplets[0][0] = btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[0][0]; |
| btampContext->btamp_AMP_Assoc.HC_pref_triplets[0][1] = btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[0][1]; |
| btampContext->btamp_AMP_Assoc.HC_pref_triplets[0][2] = btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[0][2]; |
| btampContext->btamp_AMP_Assoc.HC_pref_triplets[1][0] = btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][0]; |
| btampContext->btamp_AMP_Assoc.HC_pref_triplets[1][1] = btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][1]; |
| btampContext->btamp_AMP_Assoc.HC_pref_triplets[1][2] = btamp_ASSOC.AMP_Assoc_Preferred_Channel_List.triplets[1][2]; |
| |
| /* Also, at this point, lie and tell the other side we are connected on */ |
| /* the one channel we support. I hope this convinces the peer as BT-AMP AP */ |
| /* We really want him to use our channel. Since we only support one.*/ |
| /* Return the local Connected Channel */ |
| btamp_ASSOC.AMP_Assoc_Connected_Channel.present = 1; |
| vos_mem_copy (btamp_ASSOC.AMP_Assoc_Connected_Channel.country, "XXX", 3); |
| btamp_ASSOC.AMP_Assoc_Connected_Channel.num_triplets = 2; |
| btamp_ASSOC.AMP_Assoc_Connected_Channel.triplets[0][0] = 201; |
| btamp_ASSOC.AMP_Assoc_Connected_Channel.triplets[0][1] = 254; |
| btamp_ASSOC.AMP_Assoc_Connected_Channel.triplets[0][2] = 0; |
| //btamp_ASSOC.AMP_Assoc_Connected_Channel.triplets[1][0] = 0x01; |
| btamp_ASSOC.AMP_Assoc_Connected_Channel.triplets[1][0] = (0 != btampContext->channel)?btampContext->channel:0x01; |
| btamp_ASSOC.AMP_Assoc_Connected_Channel.triplets[1][1] = 0x01; |
| btamp_ASSOC.AMP_Assoc_Connected_Channel.triplets[1][2] = 0x11; |
| |
| |
| /* Return the local PAL Capabilities */ |
| btamp_ASSOC.AMP_Assoc_PAL_Capabilities.present = 1; |
| |
| #if 0 |
| AMP ASSOC Pal Capabilities: Size: 4 Octets |
| |
| Value Description |
| 4 TypeID for 802.11 PAL Capabilities |
| |
| 4 Length |
| |
| 0xXXXXXXXX Bit 0: |
| 0 signifies the PAL is not capable of utilizing |
| received Activity Reports |
| 1 signifies the PAL is capable of utilizing |
| received Activity Reports |
| Bit 1: |
| 0 signifies the PAL is not capable of utilizing |
| scheduling information sent in an Activity Report |
| 1 signifies the PAL is capable of utilizing |
| scheduling information sent in an Activity Report |
| Bits 2..31 Reserved |
| |
| #endif //0 |
| |
| btamp_ASSOC.AMP_Assoc_PAL_Capabilities.pal_capabilities |
| // = btampContext->btamp_Remote_AMP_Assoc.HC_pal_capabilities; |
| //= 0x03; |
| = 0x00; |
| |
| /* Return the local PAL Version */ |
| btamp_ASSOC.AMP_Assoc_PAL_Version.present = 1; |
| |
| /* Return the version and company ID data */ |
| btamp_ASSOC.AMP_Assoc_PAL_Version.pal_version = WLANBAP_PAL_VERSION; |
| btamp_ASSOC.AMP_Assoc_PAL_Version.pal_CompanyID = WLANBAP_QUALCOMM_COMPANY_ID; // Qualcomm Company ID |
| btamp_ASSOC.AMP_Assoc_PAL_Version.pal_subversion = WLANBAP_PAL_SUBVERSION; |
| |
| //Pack the AMP Assoc structure |
| vosStatus = btampPackAMP_ASSOC( |
| hHal, |
| &btamp_ASSOC, |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Read_Local_AMP_Assoc.AMP_assoc_fragment, |
| 248, |
| &nConsumed); |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, "%s: nConsumed value: %d", __func__, nConsumed); |
| |
| /* Format the command complete event to return... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_READ_LOCAL_AMP_ASSOC_CMD; |
| /*Validate the Physical handle*/ |
| if(pBapHCIReadLocalAMPAssoc->phy_link_handle != |
| btampContext->phy_link_handle) { |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, |
| "%s: Wrong Physical Link handle in Read Local AMP Assoc cmd: current: %x, new: %x", __func__, |
| btampContext->phy_link_handle, |
| pBapHCIReadLocalAMPAssoc->phy_link_handle); |
| |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Read_Local_AMP_Assoc.status |
| = WLANBAP_ERROR_NO_CNCT; |
| } else |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Read_Local_AMP_Assoc.status |
| = WLANBAP_STATUS_SUCCESS; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Read_Local_AMP_Assoc.phy_link_handle |
| = pBapHCIReadLocalAMPAssoc->phy_link_handle; |
| /* We will fit in one fragment, so remaining is exactly equal to encoded size*/ |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Read_Read_Local_AMP_Assoc.remaining_length |
| = nConsumed; |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPReadLocalAMPAssoc */ |
| |
| /*---------------------------------------------------------------------------- |
| |
| FUNCTION WLAN_BAPWriteRemoteAMPAssoc() |
| |
| DESCRIPTION |
| Implements the actual HCI Write Remote AMP Assoc command. There |
| is no need for a callback because when this call returns the action |
| has been completed. |
| |
| DEPENDENCIES |
| NA. |
| |
| PARAMETERS |
| |
| IN |
| btampHandle: pointer to the BAP handle. Returned from WLANBAP_GetNewHndl. |
| pBapHCIWriteRemoteAMPAssoc: pointer to the "HCI Write Remote AMP Assoc" Structure. |
| |
| IN/OUT |
| pBapHCIEvent: Return event value for the command complete event. |
| (The caller of this routine is responsible for sending |
| the Command Complete event up the HCI interface.) |
| |
| RETURN VALUE |
| The result code associated with performing the operation |
| |
| VOS_STATUS_E_FAULT: pointer to pBapHCIWriteRemoteAMPAssoc is NULL |
| VOS_STATUS_SUCCESS: Success |
| |
| SIDE EFFECTS |
| |
| ----------------------------------------------------------------------------*/ |
| VOS_STATUS |
| WLAN_BAPWriteRemoteAMPAssoc |
| ( |
| ptBtampHandle btampHandle, |
| tBtampTLVHCI_Write_Remote_AMP_ASSOC_Cmd *pBapHCIWriteRemoteAMPAssoc, |
| tpBtampHCI_Event pBapHCIEvent /* This now encodes ALL event types */ |
| /* Including Command Complete and Command Status*/ |
| ) |
| { |
| tWLAN_BAPEvent bapEvent; /* State machine event */ |
| VOS_STATUS vosStatus; |
| tBtampHCI_Event bapHCIEvent; |
| |
| /* I am using btampContext, instead of pBapPhysLinkMachine */ |
| //tWLAN_BAPbapPhysLinkMachine *pBapPhysLinkMachine; |
| ptBtampContext btampContext = (ptBtampContext) btampHandle; /* btampContext value */ |
| v_U8_t status; /* return the BT-AMP status here */ |
| |
| /* Validate params */ |
| if (pBapHCIWriteRemoteAMPAssoc == NULL) { |
| return VOS_STATUS_E_FAULT; |
| } |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, "%s: btampHandle value: %pK", __func__, btampHandle); |
| |
| /* Fill in the event structure */ |
| bapEvent.event = eWLAN_BAP_HCI_WRITE_REMOTE_AMP_ASSOC; |
| bapEvent.params = pBapHCIWriteRemoteAMPAssoc; |
| |
| VOS_TRACE( VOS_MODULE_ID_BAP, VOS_TRACE_LEVEL_INFO_HIGH, "%s: btampContext value: %pK", __func__, btampContext); |
| |
| /* Handle event */ |
| vosStatus = btampFsm(btampContext, &bapEvent, &status); |
| |
| /* Format the command complete event to return... */ |
| pBapHCIEvent->bapHCIEventCode = BTAMP_TLV_HCI_COMMAND_COMPLETE_EVENT; |
| pBapHCIEvent->u.btampCommandCompleteEvent.present = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.num_hci_command_packets = 1; |
| pBapHCIEvent->u.btampCommandCompleteEvent.command_opcode |
| = BTAMP_TLV_HCI_WRITE_REMOTE_AMP_ASSOC_CMD; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Remote_AMP_Assoc.status |
| = status; |
| pBapHCIEvent->u.btampCommandCompleteEvent.cc_event.Write_Remote_AMP_Assoc.phy_link_handle |
| = pBapHCIWriteRemoteAMPAssoc->phy_link_handle; |
| |
| if(WLANBAP_ERROR_NO_SUITABLE_CHANNEL == status) |
| { |
| /* Format the Physical Link Complete event to return... */ |
| bapHCIEvent.bapHCIEventCode = BTAMP_TLV_HCI_PHYSICAL_LINK_COMPLETE_EVENT; |
| bapHCIEvent.u.btampPhysicalLinkCompleteEvent.present = 1; |
| bapHCIEvent.u.btampPhysicalLinkCompleteEvent.status = status; |
| bapHCIEvent.u.btampPhysicalLinkCompleteEvent.phy_link_handle |
| = btampContext->phy_link_handle; |
| bapHCIEvent.u.btampPhysicalLinkCompleteEvent.ch_number |
| = 0; |
| |
| vosStatus = (*btampContext->pBapHCIEventCB) |
| ( |
| btampContext->pHddHdl, /* this refers the BSL per application context */ |
| &bapHCIEvent, /* This now encodes ALL event types */ |
| VOS_TRUE /* Flag to indicate assoc-specific event */ |
| ); |
| } |
| |
| /* ... */ |
| |
| return VOS_STATUS_SUCCESS; |
| } /* WLAN_BAPWriteRemoteAMPAssoc */ |
| |
| |
| |
| |
| |
| |