| /* |
| * Copyright (c) 2017 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| /** |
| * DOC: This file contains the API definitions for the Unified Wireless Module |
| * Interface (WMI) which are specific to Power management offloads (PMO). |
| */ |
| |
| #ifndef _WMI_UNIFIED_PMO_API_H_ |
| #define _WMI_UNIFIED_PMO_API_H_ |
| |
| #include "wlan_pmo_tgt_api.h" |
| #include "wlan_pmo_arp_public_struct.h" |
| #include "wlan_pmo_ns_public_struct.h" |
| #include "wlan_pmo_gtk_public_struct.h" |
| #include "wlan_pmo_wow_public_struct.h" |
| #include "wlan_pmo_pkt_filter_public_struct.h" |
| |
| /** |
| * wmi_unified_add_wow_wakeup_event_cmd() - Configures wow wakeup events. |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @bitmap: Event bitmap |
| * @enable: enable/disable |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_add_wow_wakeup_event_cmd(void *wmi_hdl, |
| uint32_t vdev_id, |
| uint32_t *bitmap, |
| bool enable); |
| |
| /** |
| * wmi_unified_wow_patterns_to_fw_cmd() - Sends WOW patterns to FW. |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @ptrn_id: pattern id |
| * @ptrn: pattern |
| * @ptrn_len: pattern length |
| * @ptrn_offset: pattern offset |
| * @mask: mask |
| * @mask_len: mask length |
| * @user: true for user configured pattern and false for default pattern |
| * @default_patterns: default patterns |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_patterns_to_fw_cmd(void *wmi_hdl, |
| uint8_t vdev_id, uint8_t ptrn_id, |
| const uint8_t *ptrn, uint8_t ptrn_len, |
| uint8_t ptrn_offset, const uint8_t *mask, |
| uint8_t mask_len, bool user, |
| uint8_t default_patterns); |
| |
| /** |
| * wmi_unified_add_clear_mcbc_filter_cmd() - set mcast filter command to fw |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @multicastAddr: mcast address |
| * @clearList: clear list flag |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_add_clear_mcbc_filter_cmd(void *wmi_hdl, |
| uint8_t vdev_id, |
| struct qdf_mac_addr multicast_addr, |
| bool clearList); |
| |
| /** |
| * wmi_unified_multiple_add_clear_mcbc_filter_cmd() - send multiple mcast |
| * filter command to fw |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @mcast_filter_params: mcast filter params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_multiple_add_clear_mcbc_filter_cmd(void *wmi_hdl, |
| uint8_t vdev_id, |
| struct pmo_mcast_filter_params *filter_param); |
| |
| /** |
| * wmi_unified_wow_sta_ra_filter_cmd() - set RA filter pattern in fw |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_sta_ra_filter_cmd(void *wmi_hdl, |
| uint8_t vdev_id, uint8_t default_pattern, |
| uint16_t rate_limit_interval); |
| |
| /** |
| * wmi_unified_enable_enhance_multicast_offload() - enhance multicast offload |
| * @wmi_hdl: wmi handle |
| * @vdev_id: vdev id |
| * @action: true for enable else false |
| * |
| * To configure enhance multicast offload in to firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_enable_enhance_multicast_offload_cmd( |
| void *wmi_hdl, uint8_t vdev_id, bool action); |
| |
| /** |
| * wmi_extract_gtk_rsp_event() - extract gtk rsp params from event |
| * @wmi_handle: wmi handle |
| * @evt_buf: pointer to event buffer |
| * @gtk_rsp_param: Pointer to gtk rsp parameters |
| * @ len: len of gtk rsp event |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_gtk_rsp_event(void *wmi_hdl, void *evt_buf, |
| struct pmo_gtk_rsp_params *gtk_rsp_param, uint32_t len); |
| |
| /** |
| * wmi_unified_process_gtk_offload_getinfo_cmd() - send GTK offload cmd to fw |
| * @wmi_handle: wmi handle |
| * @params: GTK offload params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_process_gtk_offload_getinfo_cmd(void *wmi_hdl, |
| uint8_t vdev_id, |
| uint64_t offload_req_opcode); |
| |
| /** |
| * wmi_unified_action_frame_patterns_cmd() - send action filter wmi cmd |
| * @wmi_handle: wmi handler |
| * @action_params: pointer to action_params |
| * |
| * Return: 0 for success, otherwise appropriate error code |
| */ |
| QDF_STATUS wmi_unified_action_frame_patterns_cmd(void *wmi_hdl, |
| struct pmo_action_wakeup_set_params *action_params); |
| |
| /** |
| * wmi_unified_send_gtk_offload_cmd() - send GTK offload command to fw |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @params: GTK offload parameters |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_send_gtk_offload_cmd(void *wmi_hdl, uint8_t vdev_id, |
| struct pmo_gtk_req *params, |
| bool enable_offload, |
| uint32_t gtk_offload_opcode); |
| |
| /** |
| * wmi_unified_enable_arp_ns_offload_cmd() - enable ARP NS offload |
| * @wmi_hdl: wmi handle |
| * @param: offload request |
| * |
| * To configure ARP NS off load data to firmware |
| * when target goes to wow mode. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_enable_arp_ns_offload_cmd(void *wmi_hdl, |
| struct pmo_arp_offload_params *arp_offload_req, |
| struct pmo_ns_offload_params *ns_offload_req, |
| uint8_t vdev_id); |
| |
| /** |
| * wmi_unified_conf_hw_filter_cmd() - Configure hardware filter in DTIM mode |
| * @opaque_wmi: wmi handle |
| * @req: request parameters to configure to firmware |
| * |
| * Return: QDF_STATUS |
| */ |
| QDF_STATUS wmi_unified_conf_hw_filter_cmd(void *opaque_wmi, |
| struct pmo_hw_filter_params *req); |
| |
| /** |
| * wmi_unified_lphb_config_hbenable_cmd() - enable command of LPHB configuration |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: configuration info |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_hbenable_cmd(void *wmi_hdl, |
| wmi_hb_set_enable_cmd_fixed_param *params); |
| |
| /** |
| * wmi_unified_lphb_config_tcp_params_cmd() - set tcp params of LPHB config req |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: lphb config request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_tcp_params_cmd(void *wmi_hdl, |
| wmi_hb_set_tcp_params_cmd_fixed_param *lphb_conf_req); |
| |
| /** |
| * wmi_unified_lphb_config_tcp_pkt_filter_cmd() - config LPHB tcp packet filter |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: lphb config request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_tcp_pkt_filter_cmd(void *wmi_hdl, |
| wmi_hb_set_tcp_pkt_filter_cmd_fixed_param *g_hb_tcp_filter_fp); |
| |
| /** |
| * wmi_unified_lphb_config_udp_params_cmd() - configure LPHB udp param command |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: lphb config request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_udp_params_cmd(void *wmi_hdl, |
| wmi_hb_set_udp_params_cmd_fixed_param *lphb_conf_req); |
| |
| /** |
| * wmi_unified_lphb_config_udp_pkt_filter_cmd() - configure LPHB udp pkt filter |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: lphb config request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_udp_pkt_filter_cmd(void *wmi_hdl, |
| wmi_hb_set_udp_pkt_filter_cmd_fixed_param *lphb_conf_req); |
| |
| /** |
| * wmi_unified_enable_disable_packet_filter_cmd() - enable/disable packet filter |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @enable: Flag to enable/disable packet filter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_enable_disable_packet_filter_cmd(void *wmi_hdl, |
| uint8_t vdev_id, bool enable); |
| |
| /** |
| * wmi_unified_config_packet_filter_cmd() - configure packet filter in target |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @rcv_filter_param: Packet filter parameters |
| * @filter_id: Filter id |
| * @enable: Flag to add/delete packet filter configuration |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_config_packet_filter_cmd(void *wmi_hdl, |
| uint8_t vdev_id, struct pmo_rcv_pkt_fltr_cfg *rcv_filter_param, |
| uint8_t filter_id, bool enable); |
| |
| #endif /* _WMI_UNIFIED_PMO_API_H_ */ |