hal/wifi3.0/hal_wbm.h

/*
 * Copyright (c) 2016-2019 The Linux Foundation. All rights reserved.
 *
 * Permission to use, copy, modify, and/or distribute this software for
 * any purpose with or without fee is hereby granted, provided that the
 * above copyright notice and this permission notice appear in all
 * copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
 * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
 * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
 * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
 * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
 * PERFORMANCE OF THIS SOFTWARE.
 */

/**
 * hal_setup_link_idle_list - Setup scattered idle list using the
 * buffer list provided
 *
 * @hal_soc: Opaque HAL SOC handle
 * @scatter_bufs_base_paddr: Array of physical base addresses
 * @scatter_bufs_base_vaddr: Array of virtual base addresses
 * @num_scatter_bufs: Number of scatter buffers in the above lists
 * @scatter_buf_size: Size of each scatter buffer
 * @last_buf_end_offset: Offset to the last entry
 * @num_entries: Total entries of all scatter bufs
 *
 */
static void hal_setup_link_idle_list_generic(void *hal_soc,
	qdf_dma_addr_t scatter_bufs_base_paddr[],
	void *scatter_bufs_base_vaddr[], uint32_t num_scatter_bufs,
	uint32_t scatter_buf_size, uint32_t last_buf_end_offset,
	uint32_t num_entries)
{
	int i;
	uint32_t *prev_buf_link_ptr = NULL;
	struct hal_soc *soc = (struct hal_soc *)hal_soc;
	uint32_t reg_scatter_buf_size, reg_tot_scatter_buf_size;
	uint32_t val;

	/* Link the scatter buffers */
	for (i = 0; i < num_scatter_bufs; i++) {
		if (i > 0) {
			prev_buf_link_ptr[0] =
				scatter_bufs_base_paddr[i] & 0xffffffff;
			prev_buf_link_ptr[1] = HAL_SM(
				HWIO_WBM_R0_SCATTERED_LINK_DESC_LIST_BASE_MSB,
				BASE_ADDRESS_39_32,
				((uint64_t)(scatter_bufs_base_paddr[i])
				 >> 32)) | HAL_SM(
				HWIO_WBM_R0_SCATTERED_LINK_DESC_LIST_BASE_MSB,
				ADDRESS_MATCH_TAG,
				ADDRESS_MATCH_TAG_VAL);
		}
		prev_buf_link_ptr = (uint32_t *)(scatter_bufs_base_vaddr[i] +
			scatter_buf_size - WBM_IDLE_SCATTER_BUF_NEXT_PTR_SIZE);
	}

	/* TBD: Register programming partly based on MLD & the rest based on
	 * inputs from HW team. Not complete yet.
	 */

	reg_scatter_buf_size = (scatter_buf_size -
				WBM_IDLE_SCATTER_BUF_NEXT_PTR_SIZE)/64;
	reg_tot_scatter_buf_size = ((scatter_buf_size -
		WBM_IDLE_SCATTER_BUF_NEXT_PTR_SIZE) * num_scatter_bufs)/64;

	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_IDLE_LIST_CONTROL_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		HAL_SM(HWIO_WBM_R0_IDLE_LIST_CONTROL, SCATTER_BUFFER_SIZE,
		reg_scatter_buf_size) |
		HAL_SM(HWIO_WBM_R0_IDLE_LIST_CONTROL, LINK_DESC_IDLE_LIST_MODE,
		0x1));

	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_IDLE_LIST_SIZE_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		HAL_SM(HWIO_WBM_R0_IDLE_LIST_SIZE,
		SCATTER_RING_SIZE_OF_IDLE_LINK_DESC_LIST,
		reg_tot_scatter_buf_size));

	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_SCATTERED_LINK_DESC_LIST_BASE_LSB_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		scatter_bufs_base_paddr[0] & 0xffffffff);

	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_SCATTERED_LINK_DESC_LIST_BASE_MSB_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		((uint64_t)(scatter_bufs_base_paddr[0]) >> 32) &
		HWIO_WBM_R0_SCATTERED_LINK_DESC_LIST_BASE_MSB_BASE_ADDRESS_39_32_BMSK);

	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_SCATTERED_LINK_DESC_LIST_BASE_MSB_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		HAL_SM(HWIO_WBM_R0_SCATTERED_LINK_DESC_LIST_BASE_MSB,
		BASE_ADDRESS_39_32, ((uint64_t)(scatter_bufs_base_paddr[0])
								>> 32)) |
		HAL_SM(HWIO_WBM_R0_SCATTERED_LINK_DESC_LIST_BASE_MSB,
		ADDRESS_MATCH_TAG, ADDRESS_MATCH_TAG_VAL));

	/* ADDRESS_MATCH_TAG field in the above register is expected to match
	 * with the upper bits of link pointer. The above write sets this field
	 * to zero and we are also setting the upper bits of link pointers to
	 * zero while setting up the link list of scatter buffers above
	 */

	/* Setup head and tail pointers for the idle list */
	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_HEAD_INFO_IX0_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		scatter_bufs_base_paddr[num_scatter_bufs-1] & 0xffffffff);
	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_HEAD_INFO_IX1_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		HAL_SM(HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_HEAD_INFO_IX1,
		BUFFER_ADDRESS_39_32,
		((uint64_t)(scatter_bufs_base_paddr[num_scatter_bufs-1])
								>> 32)) |
		HAL_SM(HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_HEAD_INFO_IX1,
		HEAD_POINTER_OFFSET, last_buf_end_offset >> 2));

	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_HEAD_INFO_IX0_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		scatter_bufs_base_paddr[0] & 0xffffffff);

	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_TAIL_INFO_IX0_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		scatter_bufs_base_paddr[0] & 0xffffffff);
	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_TAIL_INFO_IX1_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		HAL_SM(HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_TAIL_INFO_IX1,
		BUFFER_ADDRESS_39_32,
		((uint64_t)(scatter_bufs_base_paddr[0]) >>
		32)) | HAL_SM(HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_TAIL_INFO_IX1,
		TAIL_POINTER_OFFSET, 0));

	HAL_REG_WRITE(soc,
		HWIO_WBM_R0_SCATTERED_LINK_DESC_PTR_HP_ADDR(
		SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		2*num_entries);

	/* Set RING_ID_DISABLE */
	val = HAL_SM(HWIO_WBM_R0_WBM_IDLE_LINK_RING_MISC, RING_ID_DISABLE, 1);

	/*
	 * SRNG_ENABLE bit is not available in HWK v1 (QCA8074v1). Hence
	 * check the presence of the bit before toggling it.
	 */
#ifdef HWIO_WBM_R0_WBM_IDLE_LINK_RING_MISC_SRNG_ENABLE_BMSK
	val |= HAL_SM(HWIO_WBM_R0_WBM_IDLE_LINK_RING_MISC, SRNG_ENABLE, 1);
#endif
	HAL_REG_WRITE(soc,
		      HWIO_WBM_R0_WBM_IDLE_LINK_RING_MISC_ADDR(SEQ_WCSS_UMAC_WBM_REG_OFFSET),
		      val);
}