| /* |
| * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /** |
| * DOC: This file contains configuration definitions for MLME STA. |
| */ |
| |
| #ifndef CFG_MLME_STA_H__ |
| #define CFG_MLME_STA_H__ |
| |
| #include "wlan_mlme_public_struct.h" |
| |
| /* |
| * <ini> |
| * gStaKeepAlivePeriod - STA keep alive period |
| * |
| * |
| * @Min: 0 |
| * @Max: 1000 |
| * @Default: 30 |
| * |
| * This ini is used to control how frequently STA should send NULL frames to AP |
| * (period in seconds) to notify AP of its existence. |
| * |
| * Related: None |
| * |
| * Supported Feature: STA |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_INFRA_STA_KEEP_ALIVE_PERIOD CFG_INI_UINT( \ |
| "gStaKeepAlivePeriod", \ |
| 0, \ |
| 1000, \ |
| 30, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "send default NULL frame to AP") |
| |
| /* |
| * <ini> |
| * tgt_gtx_usr_cfg - target gtx user config |
| * @Min: 0 |
| * @Max: 32 |
| * @Default: 32 |
| * |
| * This ini is used to set target gtx user config. |
| * |
| * Related: None |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TGT_GTX_USR_CFG CFG_INI_UINT( \ |
| "tgt_gtx_usr_cfg", \ |
| 0, \ |
| 32, \ |
| 32, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "target gtx user config") |
| |
| /* |
| * <ini> |
| * pmkidModes - Enable PMKID modes |
| * This INI is used to enable PMKID feature options |
| * @Min: 0 |
| * @Max: 3 |
| * @Default: 3 |
| * |
| * Related: None |
| * |
| * Supported Feature: Scan |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_PMKID_MODES CFG_INI_UINT( \ |
| "pmkidModes", \ |
| 0, \ |
| 3, \ |
| 3, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "PMKID feature options") |
| |
| /* |
| * <ini> |
| * gIgnorePeerErpInfo - Ignore peer information |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to ignore default peer info |
| * |
| * Related: None |
| * |
| * Supported Feature: STA |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_IGNORE_PEER_ERP_INFO CFG_INI_BOOL( \ |
| "gIgnorePeerErpInfo", \ |
| 0, \ |
| "ignore default peer info") |
| |
| /* |
| * <ini> |
| * gStaPrefer80MHzOver160MHz - set sta preference to connect in 80HZ/160HZ |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to set sta preference to connect in 80HZ/160HZ |
| * |
| * 0 - Connects in 160MHz 1x1 when AP is 160MHz 2x2 |
| * 1 - Connects in 80MHz 2x2 when AP is 160MHz 2x2 |
| * |
| * Related: NA |
| * |
| * Supported Feature: 11AC |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_STA_PREFER_80MHZ_OVER_160MHZ CFG_INI_BOOL( \ |
| "gStaPrefer80MHzOver160MHz", \ |
| 0, \ |
| "Sta preference to connect in 80HZ/160HZ") |
| |
| /* |
| * <ini> |
| * gEnable5gEBT - Enables/disables 5G early beacon termination. When enabled |
| * terminate the reception of beacon if the TIM element is |
| * clear for the power saving |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * This ini is used to set default 5G early beacon termination |
| * |
| * Related: None |
| * |
| * Supported Feature: STA |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_PPS_ENABLE_5G_EBT CFG_INI_BOOL( \ |
| "gEnable5gEBT", \ |
| 1, \ |
| "5G early beacon termination") |
| |
| /* |
| * <ini> |
| * gSendDeauthBeforeCon - Send deauth before connection or not |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to set whether send deauth before connection or |
| * not. If last disconnection was due to HB failure and we reconnect |
| * to same AP next time, send deauth before starting connection. |
| * |
| * Related: None |
| * |
| * Supported Feature: STA |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_DEAUTH_BEFORE_CONNECTION CFG_INI_BOOL( \ |
| "gSendDeauthBeforeCon", \ |
| 0, \ |
| "send deauth before connection") |
| |
| /* |
| * <ini> |
| * gDot11PMode - 802.11p mode |
| * @Min: CFG_11P_DISABLED |
| * @Max: CFG_11P_CONCURRENT |
| * @Default: CFG_11P_DISABLED |
| * |
| * This ini used to set 802.11p mode. |
| * |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_DOT11P_MODE CFG_INI_UINT( \ |
| "gDot11PMode", \ |
| CFG_11P_DISABLED, \ |
| CFG_11P_CONCURRENT, \ |
| CFG_11P_DISABLED, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "802.11p mode") |
| |
| /* |
| * <ini> |
| * gEnable_go_cts2self_for_sta - Indicate firmware to stop NOA and |
| * start using cts2self |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * When gEnable_go_cts2self_for_sta is enabled then if a legacy |
| * client connects to P2P GO, Host will send a WMI VDEV command |
| * to FW to stop using NOA for P2P GO |
| * and start using CTS2SELF. |
| * |
| * |
| * Supported Feature: P2P |
| * |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_GO_CTS2SELF_FOR_STA CFG_INI_BOOL( \ |
| "gEnable_go_cts2self_for_sta", \ |
| 0, \ |
| "firmware to stop NOA and start using cts2self") |
| |
| /* |
| * <ini> |
| * g_qcn_ie_support - QCN IE support |
| * @Min: 0 (disabled) |
| * @Max: 1 (enabled) |
| * @Default: 1 (enabled) |
| * |
| * This config item is used to support QCN IE in probe/assoc/reassoc request |
| * for STA mode. QCN IE support is not added for SAP mode. |
| * |
| * Related: N/A |
| * |
| * Supported Feature: N/A |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_QCN_IE_SUPPORT CFG_INI_BOOL( \ |
| "g_qcn_ie_support", \ |
| 1, \ |
| "QCN IE support") |
| |
| /* |
| * <ini> |
| * g_fils_max_chan_guard_time - Set maximum channel guard time(ms) |
| * @Min: 0 |
| * @Max: 10 |
| * @Default: 0 |
| * |
| * This ini is used to set maximum channel guard time in milliseconds. |
| * |
| * Related: None |
| * |
| * Supported Feature: FILS |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_FILS_MAX_CHAN_GUARD_TIME CFG_INI_UINT( \ |
| "g_fils_max_chan_guard_time", \ |
| 0, \ |
| 10, \ |
| 0, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Set maximum channel guard time") |
| |
| /* |
| * <ini> |
| * SingleTIDRC - Set replay counter for all TID's |
| * @Min: 0 Separate replay counter for all TID |
| * @Max: 1 Single replay counter for all TID |
| * @Default: 1 |
| * |
| * This ini is used to set replay counter for all TID's |
| * |
| * 0 - Separate replay counter for all TID |
| * 1 - Single replay counter for all TID |
| * |
| * Related: None. |
| * |
| * Supported Feature: WMM |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_SINGLE_TID_RC CFG_INI_BOOL( \ |
| "SingleTIDRC", \ |
| 1, \ |
| "replay counter for all TID") |
| |
| /* |
| * wait_cnf_timeout - Wait assoc cnf timeout |
| * @Min: 10 |
| * @Max: 3000 |
| * @Default: 1000 |
| * |
| * This is internal configure for waiting assoc cnf timeout |
| * |
| * Related: None |
| * |
| * Usage: Internal |
| * |
| */ |
| #define CFG_WT_CNF_TIMEOUT CFG_UINT( \ |
| "wait_cnf_timeout", \ |
| 10, \ |
| 3000, \ |
| 1000, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Wait confirm timeout") |
| |
| /* |
| * <ini> |
| * gStaMiracastMccRestTimeVal - Rest time when Miracast is running. |
| * @Min: 100 |
| * @Max: 500 |
| * @Default: 400 |
| * |
| * This ini is used to set rest time for home channel for Miracast before |
| * going for scan. |
| * |
| * Related: None. |
| * |
| * Supported Feature: Concurrency |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| |
| #define CFG_STA_MCAST_MCC_REST_TIME CFG_INI_UINT( \ |
| "gStaMiracastMccRestTimeVal", \ |
| 100, \ |
| 500, \ |
| 400, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Rest time when Miracast is running") |
| |
| /* |
| * current_rssi - current rssi |
| * @Min: 0 |
| * @Max: 127 |
| * @Default: 0 |
| * |
| * This is internal configure for current rssi |
| * |
| * Related: None |
| * |
| * Usage: Internal |
| * |
| */ |
| #define CFG_CURRENT_RSSI CFG_UINT( \ |
| "current_rssi", \ |
| 0, \ |
| 127, \ |
| 0, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Current RSSI") |
| |
| /* |
| * <ini> |
| * gAllowTPCfromAP - Support for AP power constraint |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * This ini controls driver to honor/dishonor power constraint from AP. |
| * |
| * Related: None. |
| * |
| * Supported Feature: Concurrency |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TX_POWER_CTRL CFG_INI_BOOL( \ |
| "gAllowTPCfromAP", \ |
| 1, \ |
| "Support for AP power constraint") |
| |
| /* |
| * <ini> |
| * gStaKeepAliveMethod - Which keepalive method to use |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * This ini determines which keepalive method to use for station interfaces |
| * 1) Use null data packets |
| * 2) Use gratuitous ARP packets |
| * |
| * Related: gStaKeepAlivePeriod, gApKeepAlivePeriod, gGoKeepAlivePeriod |
| * |
| * Supported Feature: STA, Keepalive |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_STA_KEEPALIVE_METHOD CFG_INI_INT( \ |
| "gStaKeepAliveMethod", \ |
| MLME_STA_KEEPALIVE_NULL_DATA, \ |
| MLME_STA_KEEPALIVE_COUNT - 1, \ |
| MLME_STA_KEEPALIVE_GRAT_ARP, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Which keepalive method to use") |
| #ifdef WLAN_FEATURE_BCN_RPT_VSIE |
| /* |
| * <ini> |
| * enable_bcn_rpt_err_vsie - Enable/Disable ini for beacon report Err reasons |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to send vendor specific error reasons in beacon report |
| * response frame in case driver rejects the beacon report measurement request |
| * |
| * Related: None |
| * |
| * Supported Feature: STA |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_BCN_RPT_ERR_VSIE CFG_INI_BOOL( \ |
| "enable_bcn_rpt_err_vsie", \ |
| 0, \ |
| "To Enable err vsie in beacon report rsp") |
| #define ENABLE_BCN_RPT_ERR_VSIE_ALL CFG(CFG_ENABLE_BCN_RPT_ERR_VSIE) |
| #else |
| #define ENABLE_BCN_RPT_ERR_VSIE_ALL |
| #endif |
| |
| #define CFG_STA_ALL \ |
| CFG(CFG_INFRA_STA_KEEP_ALIVE_PERIOD) \ |
| CFG(CFG_TGT_GTX_USR_CFG) \ |
| CFG(CFG_PMKID_MODES) \ |
| CFG(CFG_IGNORE_PEER_ERP_INFO) \ |
| CFG(CFG_STA_PREFER_80MHZ_OVER_160MHZ) \ |
| CFG(CFG_PPS_ENABLE_5G_EBT) \ |
| CFG(CFG_ENABLE_DEAUTH_BEFORE_CONNECTION) \ |
| CFG(CFG_DOT11P_MODE) \ |
| CFG(CFG_ENABLE_GO_CTS2SELF_FOR_STA) \ |
| CFG(CFG_QCN_IE_SUPPORT) \ |
| CFG(CFG_STA_MCAST_MCC_REST_TIME) \ |
| CFG(CFG_FILS_MAX_CHAN_GUARD_TIME) \ |
| CFG(CFG_SINGLE_TID_RC) \ |
| CFG(CFG_STA_KEEPALIVE_METHOD) \ |
| CFG(CFG_WT_CNF_TIMEOUT) \ |
| CFG(CFG_CURRENT_RSSI) \ |
| CFG(CFG_TX_POWER_CTRL) \ |
| ENABLE_BCN_RPT_ERR_VSIE_ALL |
| #endif /* CFG_MLME_STA_H__ */ |