| /* |
| * Copyright (c) 2012-2019 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /** |
| * DOC: This file contains centralized definitions of converged configuration. |
| */ |
| |
| #ifndef __CFG_FWOL_GENERIC_H |
| #define __CFG_FWOL_GENERIC_H |
| |
| |
| /* |
| * |
| * <ini> |
| * gEnableANI - Enable Adaptive Noise Immunity |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * This ini is used to enable or disable Adaptive Noise Immunity. |
| * |
| * Related: None |
| * |
| * Supported Feature: ANI |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_ANI CFG_INI_BOOL( \ |
| "gEnableANI", \ |
| 1, \ |
| "Enable/Disable Adaptive Noise Immunity") |
| |
| /* |
| * <ini> |
| * gSetRTSForSIFSBursting - set rts for sifs bursting |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini set rts for sifs bursting |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_SET_RTS_FOR_SIFS_BURSTING CFG_INI_BOOL( \ |
| "gSetRTSForSIFSBursting", \ |
| 0, \ |
| "Set rts for sifs bursting") |
| |
| /* |
| * <ini> |
| * gMaxMPDUsInAMPDU - max mpdus in ampdu |
| * @Min: 0 |
| * @Max: 64 |
| * @Default: 0 |
| * |
| * This ini configure max mpdus in ampdu |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_MAX_MPDUS_IN_AMPDU CFG_INI_INT( \ |
| "gMaxMPDUsInAMPDU", \ |
| 0, \ |
| 64, \ |
| 0, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "This ini configure max mpdus in ampdu") |
| |
| /* |
| * <ini> |
| * arp_ac_category - ARP access category |
| * @Min: 0 |
| * @Max: 3 |
| * @Default: 3 |
| * |
| * Firmware by default categorizes ARP packets with VOICE TID. |
| * This ini shall be used to override the default configuration. |
| * Access category enums are referenced in qca-vendor.h |
| * QCA_WLAN_AC_BE = 0 (Best effort) |
| * QCA_WLAN_AC_BK = 1 (Background) |
| * QCA_WLAN_AC_VI = 2 (Video) |
| * QCA_WLAN_AC_VO = 3 (Voice) |
| * |
| * Related: none |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_ARP_AC_CATEGORY CFG_INI_INT( \ |
| "arp_ac_category", \ |
| 0, \ |
| 3, \ |
| 3, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Override the default ARP AC configuration") |
| |
| /* |
| * <ini> |
| * gEnableFastPwrTransition - Configuration for fast power transition |
| * @Min: 0 |
| * @Max: 2 |
| * @Default: 0 |
| * |
| * This ini supported values: |
| * 0x0: Phy register retention disabled (Higher timeline, Good for power) |
| * 0x1: Phy register retention statically enabled |
| * 0x2: Phy register retention enabled/disabled dynamically |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_PHY_REG CFG_INI_UINT( \ |
| "gEnableFastPwrTransition", \ |
| 0x0, \ |
| 0x2, \ |
| 0x0, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Configuration for fast power transition") |
| |
| /* |
| * <ini> |
| * gUpperBrssiThresh - Sets Upper threshold for beacon RSSI |
| * @Min: 36 |
| * @Max: 66 |
| * @Default: 46 |
| * |
| * This ini sets Upper beacon threshold for beacon RSSI in FW |
| * Used to reduced RX chainmask in FW, once this threshold is |
| * reached FW will switch to 1X1 (Single chain). |
| * |
| * Supported Feature: STA |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_UPPER_BRSSI_THRESH CFG_INI_UINT( \ |
| "gUpperBrssiThresh", \ |
| 36, \ |
| 66, \ |
| 46, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Sets Upper threshold for beacon RSSI") |
| |
| /* |
| * <ini> |
| * gLowerBrssiThresh - Sets Lower threshold for beacon RSSI |
| * @Min: 6 |
| * @Max: 36 |
| * @Default: 26 |
| * |
| * This ini sets Lower beacon threshold for beacon RSSI in FW |
| * Used to increase RX chainmask in FW, once this threshold is |
| * reached FW will switch to 2X2 chain. |
| * |
| * Supported Feature: STA |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_LOWER_BRSSI_THRESH CFG_INI_UINT( \ |
| "gLowerBrssiThresh", \ |
| 6, \ |
| 36, \ |
| 26, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Sets Lower threshold for beacon RSSI") |
| |
| /* |
| * <ini> |
| * gDtim1ChRxEnable - Enable/Disable DTIM 1Chrx feature |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * This ini Enables or Disables DTIM 1CHRX feature in FW |
| * If this flag is set FW enables shutting off one chain |
| * while going to power save. |
| * |
| * Supported Feature: STA |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_DTIM_1CHRX_ENABLE CFG_INI_BOOL( \ |
| "gDtim1ChRxEnable", \ |
| 1, \ |
| "Enable/Disable DTIM 1Chrx feature") |
| |
| /* |
| * <ini> |
| * gEnableAlternativeChainmask - Enable Co-Ex Alternative Chainmask |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to enable/disable the Co-ex Alternative Chainmask |
| * feature via the WMI_PDEV_PARAM_ALTERNATIVE_CHAINMASK_SCHEME |
| * firmware parameter. |
| * |
| * Related: None |
| * |
| * Supported Feature: STA |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_COEX_ALT_CHAINMASK CFG_INI_BOOL( \ |
| "gEnableAlternativeChainmask", \ |
| 0, \ |
| "Enable Co-Ex Alternative Chainmask") |
| |
| /* |
| * <ini> |
| * gEnableSmartChainmask - Enable Smart Chainmask |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to enable/disable the Smart Chainmask feature via |
| * the WMI_PDEV_PARAM_SMART_CHAINMASK_SCHEME firmware parameter. |
| * |
| * Related: None |
| * |
| * Supported Feature: STA |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_SMART_CHAINMASK CFG_INI_BOOL( \ |
| "gEnableSmartChainmask", \ |
| 0, \ |
| "Enable/disable the Smart Chainmask feature") |
| |
| /* |
| * <ini> |
| * gEnableRTSProfiles - It will use configuring different RTS profiles |
| * @Min: 0 |
| * @Max: 66 |
| * @Default: 33 |
| * |
| * This ini used for configuring different RTS profiles |
| * to firmware. |
| * Following are the valid values for the rts profile: |
| * RTSCTS_DISABLED 0 |
| * NOT_ALLOWED 1 |
| * NOT_ALLOWED 2 |
| * RTSCTS_DISABLED 16 |
| * RTSCTS_ENABLED_4_SECOND_RATESERIES 17 |
| * CTS2SELF_ENABLED_4_SECOND_RATESERIES 18 |
| * RTSCTS_DISABLED 32 |
| * RTSCTS_ENABLED_4_SWRETRIES 33 |
| * CTS2SELF_ENABLED_4_SWRETRIES 34 |
| * NOT_ALLOWED 48 |
| * NOT_ALLOWED 49 |
| * NOT_ALLOWED 50 |
| * RTSCTS_DISABLED 64 |
| * RTSCTS_ENABLED_4_ALL_RATESERIES 65 |
| * CTS2SELF_ENABLED_4_ALL_RATESERIES 66 |
| * |
| * Related: None |
| * |
| * Supported Feature: STA |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_FW_RTS_PROFILE CFG_INI_INT( \ |
| "gEnableRTSProfiles", \ |
| 0, \ |
| 66, \ |
| 33, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "It is used to configure different RTS profiles") |
| |
| /* <ini> |
| * gFwDebugLogLevel - Firmware debug log level |
| * @Min: 0 |
| * @Max: 255 |
| * @Default: 3 |
| * |
| * This option controls the level of firmware debug log. Default value is |
| * DBGLOG_WARN, which is to enable error and warning logs. |
| * |
| * Related: None |
| * |
| * Supported Features: Debugging |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_FW_DEBUG_LOG_LEVEL CFG_INI_INT( \ |
| "gFwDebugLogLevel", \ |
| 0, \ |
| 255, \ |
| 3, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "enable error and warning logs by default") |
| |
| /* <ini> |
| * gFwDebugLogType - Firmware debug log type |
| * @Min: 0 |
| * @Max: 255 |
| * @Default: 3 |
| * |
| * This option controls how driver is to give the firmware logs to net link |
| * when cnss_diag service is started. |
| * |
| * Related: None |
| * |
| * Supported Features: Debugging |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_FW_LOG_TYPE CFG_INI_INT( \ |
| "gFwDebugLogType", \ |
| 0, \ |
| 255, \ |
| 3, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Default value to be given to the net link cnss_diag service") |
| |
| /* |
| * <ini> |
| * gFwDebugModuleLoglevel - modulized firmware debug log level |
| * @Min: N/A |
| * @Max: N/A |
| * @Default: N/A |
| * |
| * This ini is used to set modulized firmware debug log level. |
| * FW module log level input string format looks like below: |
| * gFwDebugModuleLoglevel="<FW Module ID>,<Log Level>,..." |
| * For example: |
| * gFwDebugModuleLoglevel="1,0,2,1,3,2,4,3,5,4,6,5,7,6" |
| * The above input string means: |
| * For FW module ID 1 enable log level 0 |
| * For FW module ID 2 enable log level 1 |
| * For FW module ID 3 enable log level 2 |
| * For FW module ID 4 enable log level 3 |
| * For FW module ID 5 enable log level 4 |
| * For FW module ID 6 enable log level 5 |
| * For FW module ID 7 enable log level 6 |
| * For valid values of log levels check enum DBGLOG_LOG_LVL and |
| * for valid values of module ids check enum WLAN_MODULE_ID. |
| * |
| * Related: None |
| * |
| * Supported Feature: Debugging |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| |
| #define FW_MODULE_LOG_LEVEL_STRING_LENGTH (512) |
| #define CFG_ENABLE_FW_MODULE_LOG_LEVEL CFG_INI_STRING( \ |
| "gFwDebugModuleLoglevel", \ |
| 0, \ |
| FW_MODULE_LOG_LEVEL_STRING_LENGTH, \ |
| "2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,"\ |
| "46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1,4,1", \ |
| "Set modulized firmware debug log level") |
| |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| /* <ini> |
| * gRAFilterEnable |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * Related: None |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_RA_FILTER_ENABLE CFG_INI_BOOL( \ |
| "gRAFilterEnable", \ |
| 1, \ |
| "Enable RA Filter") |
| #else |
| #define CFG_RA_FILTER_ENABLE |
| #endif |
| |
| /* <ini> |
| * gtsf_gpio_pin |
| * @Min: 0 |
| * @Max: 254 |
| * @Default: 255 |
| * |
| * GPIO pin to toggle when capture tsf |
| * |
| * Related: None |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_SET_TSF_GPIO_PIN CFG_INI_INT( \ |
| "gtsf_gpio_pin", \ |
| 0, \ |
| 254, \ |
| 255, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "GPIO pin to toggle when capture tsf") |
| |
| #ifdef WLAN_FEATURE_TSF_PLUS_EXT_GPIO_IRQ |
| /* <ini> |
| * gtsf_irq_host_gpio_pin |
| * @Min: 0 |
| * @Max: 254 |
| * @Default: 255 |
| * |
| * TSF irq GPIO pin of host platform |
| * |
| * Related: None |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_SET_TSF_IRQ_HOST_GPIO_PIN CFG_INI_INT( \ |
| "gtsf_irq_host_gpio_pin", \ |
| 0, \ |
| 254, \ |
| 255, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "TSF irq GPIO pin of host platform") |
| |
| #define __CFG_SET_TSF_IRQ_HOST_GPIO_PIN CFG(CFG_SET_TSF_IRQ_HOST_GPIO_PIN) |
| #else |
| #define __CFG_SET_TSF_IRQ_HOST_GPIO_PIN |
| #endif |
| |
| #if defined(WLAN_FEATURE_TSF) && defined(WLAN_FEATURE_TSF_PLUS) |
| /* <ini> |
| * gtsf_ptp_options: TSF Plus feature options |
| * @Min: 0 |
| * @Max: 0xff |
| * @Default: 0xf |
| * |
| * CFG_SET_TSF_PTP_OPT_RX (0x1) |
| * CFG_SET_TSF_PTP_OPT_TX (0x2) |
| * CFG_SET_TSF_PTP_OPT_RAW (0x4) |
| * CFG_SET_TSF_DBG_FS (0x8) |
| * |
| * Related: None |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_SET_TSF_PTP_OPT_RX (0x1) |
| #define CFG_SET_TSF_PTP_OPT_TX (0x2) |
| #define CFG_SET_TSF_PTP_OPT_RAW (0x4) |
| #define CFG_SET_TSF_DBG_FS (0x8) |
| |
| #define CFG_SET_TSF_PTP_OPT CFG_INI_UINT( \ |
| "gtsf_ptp_options", \ |
| 0, \ |
| 0xff, \ |
| 0xf, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "TSF Plus feature options") |
| |
| #define __CFG_SET_TSF_PTP_OPT CFG(CFG_SET_TSF_PTP_OPT) |
| #else |
| #define __CFG_SET_TSF_PTP_OPT |
| #endif |
| |
| #ifdef DHCP_SERVER_OFFLOAD |
| /* <ini> |
| * gDHCPServerOffloadEnable |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * DHCP Server offload support |
| * |
| * Related: None |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_DHCP_SERVER_OFFLOAD_SUPPORT CFG_INI_BOOL( \ |
| "gDHCPServerOffloadEnable", \ |
| 0, \ |
| "DHCP Server offload support") |
| |
| /* <ini> |
| * gDHCPMaxNumClients |
| * @Min: 1 |
| * @Max: 8 |
| * @Default: 8 |
| * |
| * Number of DHCP server offload clients |
| * |
| * Related: None |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT CFG_INI_INT( \ |
| "gDHCPMaxNumClients", \ |
| 1, \ |
| 8, \ |
| 8, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Number of DHCP server offload clients") |
| |
| #define CFG_FWOL_DHCP \ |
| CFG(CFG_DHCP_SERVER_OFFLOAD_SUPPORT) \ |
| CFG(CFG_DHCP_SERVER_OFFLOAD_NUM_CLIENT) |
| |
| #else |
| #define CFG_FWOL_DHCP |
| #endif |
| |
| /* |
| * <ini> |
| * gEnableLPRx - Enable/Disable LPRx |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * This ini Enables or disables the LPRx in FW |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| |
| #define CFG_LPRX CFG_INI_BOOL( \ |
| "gEnableLPRx", \ |
| 1, \ |
| "LPRx control") |
| |
| #ifdef WLAN_FEATURE_SAE |
| /* |
| * <ini> |
| * sae_enabled - Enable/Disable SAE support in driver |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * This ini is used to enable/disable SAE support in driver |
| * Driver will update config to supplicant based on this config. |
| * |
| * Related: None |
| * |
| * Supported Feature: SAE |
| * Usage: External |
| * |
| * </ini> |
| */ |
| |
| #define CFG_IS_SAE_ENABLED CFG_INI_BOOL( \ |
| "sae_enabled", \ |
| 1, \ |
| "SAE feature control") |
| #define __CFG_IS_SAE_ENABLED CFG(CFG_IS_SAE_ENABLED) |
| #else |
| #define __CFG_IS_SAE_ENABLED |
| #endif |
| |
| /* |
| * <ini> |
| * gcmp_enabled - ini to enable/disable GCMP |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * Currently Firmware update the sequence number for each TID with 2^3 |
| * because of security issues. But with this PN mechanism, throughput drop |
| * is observed. With this ini FW takes the decision to trade off between |
| * security and throughput |
| * |
| * Supported Feature: STA/SAP/P2P |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| |
| #define CFG_ENABLE_GCMP CFG_INI_BOOL( \ |
| "gcmp_enabled", \ |
| 1, \ |
| "GCMP Feature control param") |
| |
| /* |
| * <ini> |
| * gTxSchDelay - Enable/Disable Tx sch delay |
| * @Min: 0 |
| * @Max: 5 |
| * @Default: 0 |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TX_SCH_DELAY CFG_INI_UINT( \ |
| "gTxSchDelay", \ |
| 0, \ |
| 5, \ |
| 0, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Enable/Disable Tx sch delay") |
| |
| /* |
| * <ini> |
| * gEnableSecondaryRate - Enable/Disable Secondary Retry Rate feature subset |
| * |
| * @Min: 0x0 |
| * @Max: 0x3F |
| * @Default: 0x17 |
| * |
| * It is a 32 bit value such that the various bits represent as below - |
| * Bit-0 : is Enable/Disable Control for "PPDU Secondary Retry Support" |
| * Bit-1 : is Enable/Disable Control for "RTS Black/White-listing Support" |
| * Bit-2 : is Enable/Disable Control for "Higher MCS retry restriction |
| * on XRETRY failures" |
| * Bit 3-5 : is "Xretry threshold" to use |
| * Bit 3~31 : reserved for future use. |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_ENABLE_SECONDARY_RATE CFG_INI_UINT( \ |
| "gEnableSecondaryRate", \ |
| 0, \ |
| 0x3f, \ |
| 0x17, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Secondary Retry Rate feature subset control") |
| |
| #define CFG_FWOL_GENERIC_ALL \ |
| CFG_FWOL_DHCP \ |
| CFG(CFG_ENABLE_ANI) \ |
| CFG(CFG_SET_RTS_FOR_SIFS_BURSTING) \ |
| CFG(CFG_MAX_MPDUS_IN_AMPDU) \ |
| CFG(CFG_ARP_AC_CATEGORY) \ |
| CFG(CFG_ENABLE_PHY_REG) \ |
| CFG(CFG_UPPER_BRSSI_THRESH) \ |
| CFG(CFG_LOWER_BRSSI_THRESH) \ |
| CFG(CFG_DTIM_1CHRX_ENABLE) \ |
| CFG(CFG_ENABLE_COEX_ALT_CHAINMASK) \ |
| CFG(CFG_ENABLE_SMART_CHAINMASK) \ |
| CFG(CFG_ENABLE_FW_RTS_PROFILE) \ |
| CFG(CFG_ENABLE_FW_DEBUG_LOG_LEVEL) \ |
| CFG(CFG_ENABLE_FW_LOG_TYPE) \ |
| CFG(CFG_ENABLE_FW_MODULE_LOG_LEVEL) \ |
| CFG(CFG_RA_FILTER_ENABLE) \ |
| CFG(CFG_SET_TSF_GPIO_PIN) \ |
| __CFG_SET_TSF_IRQ_HOST_GPIO_PIN \ |
| __CFG_SET_TSF_PTP_OPT \ |
| CFG(CFG_LPRX) \ |
| __CFG_IS_SAE_ENABLED \ |
| CFG(CFG_ENABLE_GCMP) \ |
| CFG(CFG_TX_SCH_DELAY) \ |
| CFG(CFG_ENABLE_SECONDARY_RATE) |
| |
| #endif |