| /* |
| * Copyright (c) 2013-2016 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| #ifndef WMA_H |
| #define WMA_H |
| |
| #include "a_types.h" |
| #include "qdf_types.h" |
| #include "osapi_linux.h" |
| #include "htc_packet.h" |
| #include "i_qdf_event.h" |
| #include "wmi_services.h" |
| #include "wmi_unified.h" |
| #include "wmi_version.h" |
| #include "qdf_types.h" |
| #include "cfg_api.h" |
| #include "qdf_status.h" |
| #include "cds_sched.h" |
| #include "sir_mac_prot_def.h" |
| #include "wma_types.h" |
| #include "ol_txrx_types.h" |
| #include <linux/workqueue.h> |
| #include "utils_api.h" |
| #include "lim_types.h" |
| #include "wmi_unified_api.h" |
| #include "cdp_txrx_cmn.h" |
| #include "ol_defines.h" |
| #include "dbglog.h" |
| |
| /* Platform specific configuration for max. no. of fragments */ |
| #define QCA_OL_11AC_TX_MAX_FRAGS 2 |
| |
| /* Private */ |
| |
| #define WMA_READY_EVENTID_TIMEOUT 6000 |
| #define WMA_SERVICE_READY_EXT_TIMEOUT 6000 |
| #define WMA_TGT_SUSPEND_COMPLETE_TIMEOUT 6000 |
| #define WMA_WAKE_LOCK_TIMEOUT 1000 |
| #define WMA_RESUME_TIMEOUT 6000 |
| #define MAX_MEM_CHUNKS 32 |
| |
| #define WMA_CRASH_INJECT_TIMEOUT 5000 |
| |
| /* MAC ID to PDEV ID mapping is as given below |
| * MAC_ID PDEV_ID |
| * 0 1 |
| * 1 2 |
| * SOC Level WMI_PDEV_ID_SOC |
| */ |
| #define WMA_MAC_TO_PDEV_MAP(x) ((x) + (1)) |
| #define WMA_PDEV_TO_MAC_MAP(x) ((x) - (1)) |
| |
| /* In prima 12 HW stations are supported including BCAST STA(staId 0) |
| * and SELF STA(staId 1) so total ASSOC stations which can connect to Prima |
| * SoftAP = 12 - 1(Self STa) - 1(Bcast Sta) = 10 Stations. |
| */ |
| |
| #ifdef WLAN_SOFTAP_VSTA_FEATURE |
| #define WMA_MAX_SUPPORTED_STAS 38 |
| #else |
| #define WMA_MAX_SUPPORTED_STAS 12 |
| #endif |
| #define WMA_MAX_SUPPORTED_BSS 5 |
| |
| #define FRAGMENT_SIZE 3072 |
| |
| #define WMA_INVALID_VDEV_ID 0xFF |
| #define MAX_MEM_CHUNKS 32 |
| #define WMA_MAX_VDEV_SIZE 20 |
| #define WMA_VDEV_TBL_ENTRY_ADD 1 |
| #define WMA_VDEV_TBL_ENTRY_DEL 0 |
| |
| /* 11A/G channel boundary */ |
| #define WMA_11A_CHANNEL_BEGIN 34 |
| #define WMA_11A_CHANNEL_END 165 |
| #define WMA_11G_CHANNEL_BEGIN 1 |
| #define WMA_11G_CHANNEL_END 14 |
| |
| #define WMA_11P_CHANNEL_BEGIN (170) |
| #define WMA_11P_CHANNEL_END (184) |
| |
| #define WMA_LOGD(args ...) \ |
| QDF_TRACE(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_DEBUG, ## args) |
| #define WMA_LOGI(args ...) \ |
| QDF_TRACE(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_INFO, ## args) |
| #define WMA_LOGW(args ...) \ |
| QDF_TRACE(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_WARN, ## args) |
| #define WMA_LOGE(args ...) \ |
| QDF_TRACE(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_ERROR, ## args) |
| #define WMA_LOGP(args ...) \ |
| QDF_TRACE(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_FATAL, ## args) |
| |
| #define WMA_DEBUG_ALWAYS |
| |
| #ifdef WMA_DEBUG_ALWAYS |
| #define WMA_LOGA(args ...) \ |
| QDF_TRACE(QDF_MODULE_ID_WMA, QDF_TRACE_LEVEL_FATAL, ## args) |
| #else |
| #define WMA_LOGA(args ...) |
| #endif |
| |
| #define ALIGNED_WORD_SIZE 4 |
| #define WLAN_HAL_MSG_TYPE_MAX_ENUM_SIZE 0x7FFF |
| #define WMA_WILDCARD_PDEV_ID 0x0 |
| |
| /* Prefix used by scan req ids generated on the host */ |
| #define WMA_HOST_SCAN_REQID_PREFIX 0xA000 |
| /* Prefix used by roam scan req ids generated on the host */ |
| #define WMA_HOST_ROAM_SCAN_REQID_PREFIX 0xA800 |
| /* Prefix used by scan requestor id on host */ |
| #define WMA_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 |
| |
| #define WMA_HW_DEF_SCAN_MAX_DURATION 30000 /* 30 secs */ |
| |
| /* Max offchannel duration */ |
| #define WMA_BURST_SCAN_MAX_NUM_OFFCHANNELS (3) |
| #define WMA_SCAN_NPROBES_DEFAULT (2) |
| #define WMA_SCAN_IDLE_TIME_DEFAULT (25) |
| #define WMA_P2P_SCAN_MAX_BURST_DURATION (180) |
| #define WMA_CTS_DURATION_MS_MAX (32) |
| #define WMA_GO_MIN_ACTIVE_SCAN_BURST_DURATION (40) |
| #define WMA_GO_MAX_ACTIVE_SCAN_BURST_DURATION (120) |
| #define WMA_DWELL_TIME_PASSIVE_DEFAULT (110) |
| #define WMA_DWELL_TIME_PROBE_TIME_MAP_SIZE (11) |
| #define WMA_3PORT_CONC_SCAN_MAX_BURST_DURATION (25) |
| |
| #define WMA_SEC_TO_USEC (1000000) |
| |
| #define BEACON_TX_BUFFER_SIZE (512) |
| |
| /* WMA_ETHER_TYPE_OFFSET = sa(6) + da(6) */ |
| #define WMA_ETHER_TYPE_OFFSET (6 + 6) |
| /* WMA_ICMP_V6_HEADER_OFFSET = sa(6) + da(6) + eth_type(2) + icmp_v6_hdr(6)*/ |
| #define WMA_ICMP_V6_HEADER_OFFSET (6 + 6 + 2 + 6) |
| /* WMA_ICMP_V6_TYPE_OFFSET = sa(6) + da(6) + eth_type(2) + 40 */ |
| #define WMA_ICMP_V6_TYPE_OFFSET (6 + 6 + 2 + 40) |
| /* WMA_IPV4_PROTOCOL = sa(6) + da(6) + eth_type(2) + 9 */ |
| #define WMA_IPV4_PROTOCOL (6 + 6 + 2 + 9) |
| #define WMA_ICMP_V6_HEADER_TYPE (0x3A) |
| #define WMA_ICMP_V6_RA_TYPE (0x86) |
| #define WMA_ICMP_V6_NS_TYPE (0x87) |
| #define WMA_ICMP_V6_NA_TYPE (0x88) |
| #define WMA_BCAST_MAC_ADDR (0xFF) |
| #define WMA_MCAST_IPV4_MAC_ADDR (0x01) |
| #define WMA_MCAST_IPV6_MAC_ADDR (0x33) |
| #define WMA_ICMP_PROTOCOL (0x01) |
| |
| #define WMA_IS_EAPOL_GET_MIN_LEN 14 |
| #define WMA_EAPOL_SUBTYPE_GET_MIN_LEN 21 |
| #define WMA_EAPOL_INFO_GET_MIN_LEN 23 |
| #define WMA_IS_DHCP_GET_MIN_LEN 38 |
| #define WMA_DHCP_SUBTYPE_GET_MIN_LEN 0x11D |
| #define WMA_DHCP_INFO_GET_MIN_LEN 50 |
| #define WMA_IS_ARP_GET_MIN_LEN 14 |
| #define WMA_ARP_SUBTYPE_GET_MIN_LEN 22 |
| #define WMA_IPV4_PROTO_GET_MIN_LEN 24 |
| #define WMA_IPV4_PKT_INFO_GET_MIN_LEN 42 |
| #define WMA_ICMP_SUBTYPE_GET_MIN_LEN 35 |
| #define WMA_IPV6_PROTO_GET_MIN_LEN 21 |
| #define WMA_IPV6_PKT_INFO_GET_MIN_LEN 62 |
| #define WMA_ICMPV6_SUBTYPE_GET_MIN_LEN 55 |
| |
| /** |
| * ds_mode: distribution system mode |
| * @IEEE80211_NO_DS: NO DS at either side |
| * @IEEE80211_TO_DS: DS at receiver side |
| * @IEEE80211_FROM_DS: DS at sender side |
| * @IEEE80211_DS_TO_DS: DS at both sender and revceiver side |
| */ |
| enum ds_mode { |
| IEEE80211_NO_DS, |
| IEEE80211_TO_DS, |
| IEEE80211_FROM_DS, |
| IEEE80211_DS_TO_DS |
| }; |
| |
| /* Roaming default values |
| * All time and period values are in milliseconds. |
| * All rssi values are in dB except for WMA_NOISE_FLOOR_DBM_DEFAULT. |
| */ |
| |
| #define WMA_ROAM_SCAN_CHANNEL_SWITCH_TIME (4) |
| #define WMA_NOISE_FLOOR_DBM_DEFAULT (-96) |
| #define WMA_ROAM_RSSI_DIFF_DEFAULT (5) |
| #define WMA_ROAM_DWELL_TIME_ACTIVE_DEFAULT (100) |
| #define WMA_ROAM_DWELL_TIME_PASSIVE_DEFAULT (110) |
| #define WMA_ROAM_MIN_REST_TIME_DEFAULT (50) |
| #define WMA_ROAM_MAX_REST_TIME_DEFAULT (500) |
| #define WMA_ROAM_LOW_RSSI_TRIGGER_DEFAULT (20) |
| #define WMA_ROAM_LOW_RSSI_TRIGGER_VERYLOW (10) |
| #define WMA_ROAM_BEACON_WEIGHT_DEFAULT (14) |
| #define WMA_ROAM_OPP_SCAN_PERIOD_DEFAULT (120000) |
| #define WMA_ROAM_OPP_SCAN_AGING_PERIOD_DEFAULT (WMA_ROAM_OPP_SCAN_PERIOD_DEFAULT * 5) |
| #define WMA_ROAM_BMISS_FIRST_BCNT_DEFAULT (10) |
| #define WMA_ROAM_BMISS_FINAL_BCNT_DEFAULT (10) |
| #define WMA_ROAM_BMISS_FIRST_BCNT_DEFAULT_P2P (15) |
| #define WMA_ROAM_BMISS_FINAL_BCNT_DEFAULT_P2P (45) |
| |
| #define WMA_INVALID_KEY_IDX 0xff |
| #define WMA_DFS_RADAR_FOUND 1 |
| |
| #define WMA_MAX_RF_CHAINS(x) ((1 << x) - 1) |
| #define WMA_MIN_RF_CHAINS (1) |
| |
| #ifdef FEATURE_WLAN_EXTSCAN |
| #define WMA_MAX_EXTSCAN_MSG_SIZE 1536 |
| #define WMA_EXTSCAN_REST_TIME 100 |
| #define WMA_EXTSCAN_MAX_SCAN_TIME 50000 |
| #define WMA_EXTSCAN_BURST_DURATION 150 |
| #endif |
| |
| #define WMA_BCN_BUF_MAX_SIZE 2500 |
| #define WMA_NOA_IE_SIZE(num_desc) (2 + (13 * (num_desc))) |
| #define WMA_MAX_NOA_DESCRIPTORS 4 |
| |
| #define WMA_TIM_SUPPORTED_PVB_LENGTH ((HAL_NUM_STA / 8) + 1) |
| |
| #define WMA_WOW_PTRN_MASK_VALID 0xFF |
| #define WMA_NUM_BITS_IN_BYTE 8 |
| |
| #define WMA_AP_WOW_DEFAULT_PTRN_MAX 4 |
| #define WMA_STA_WOW_DEFAULT_PTRN_MAX 5 |
| |
| #define WMA_BSS_STATUS_STARTED 0x1 |
| #define WMA_BSS_STATUS_STOPPED 0x2 |
| |
| #define WMA_TARGET_REQ_TYPE_VDEV_START 0x1 |
| #define WMA_TARGET_REQ_TYPE_VDEV_STOP 0x2 |
| #define WMA_TARGET_REQ_TYPE_VDEV_DEL 0x3 |
| |
| #define WMA_PEER_ASSOC_CNF_START 0x01 |
| #define WMA_PEER_ASSOC_TIMEOUT (3000) /* 3 seconds */ |
| |
| #define WMA_DELETE_STA_RSP_START 0x02 |
| #define WMA_DELETE_STA_TIMEOUT (6000) /* 6 seconds */ |
| |
| #define WMA_DEL_P2P_SELF_STA_RSP_START 0x03 |
| |
| #define WMA_VDEV_START_REQUEST_TIMEOUT (3000) /* 3 seconds */ |
| #define WMA_VDEV_STOP_REQUEST_TIMEOUT (3000) /* 3 seconds */ |
| |
| #define WMA_TGT_INVALID_SNR 0x127 |
| |
| #define WMA_TX_Q_RECHECK_TIMER_WAIT 2 /* 2 ms */ |
| #define WMA_TX_Q_RECHECK_TIMER_MAX_WAIT 20 /* 20 ms */ |
| #define WMA_MAX_NUM_ARGS 8 |
| |
| #define WMA_SMPS_MASK_LOWER_16BITS 0xFF |
| #define WMA_SMPS_MASK_UPPER_3BITS 0x7 |
| #define WMA_SMPS_PARAM_VALUE_S 29 |
| |
| #define WMA_MAX_SCAN_ID 0x00FF |
| |
| /* |
| * Setting the Tx Comp Timeout to 1 secs. |
| * TODO: Need to Revist the Timing |
| */ |
| #define WMA_TX_FRAME_COMPLETE_TIMEOUT 1000 |
| #define WMA_TX_FRAME_BUFFER_NO_FREE 0 |
| #define WMA_TX_FRAME_BUFFER_FREE 1 |
| |
| /* Default InActivity Time is 200 ms */ |
| #define POWERSAVE_DEFAULT_INACTIVITY_TIME 200 |
| |
| /* Default Listen Interval */ |
| #define POWERSAVE_DEFAULT_LISTEN_INTERVAL 1 |
| |
| /* |
| * TODO: Add WMI_CMD_ID_MAX as part of WMI_CMD_ID |
| * instead of assigning it to the last valid wmi |
| * cmd+1 to avoid updating this when a command is |
| * added/deleted. |
| */ |
| #define WMI_CMDID_MAX (WMI_TXBF_CMDID + 1) |
| |
| #define WMA_NLO_FREQ_THRESH 1000 /* in MHz */ |
| #define WMA_SEC_TO_MSEC(sec) (sec * 1000) /* sec to msec */ |
| #define WMA_MSEC_TO_USEC(msec) (msec * 1000) /* msec to usec */ |
| |
| /* Default rssi threshold defined in CFG80211 */ |
| #define WMA_RSSI_THOLD_DEFAULT -300 |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| #define WMA_PNO_MATCH_WAKE_LOCK_TIMEOUT (5 * 1000) /* in msec */ |
| #define WMA_PNO_SCAN_COMPLETE_WAKE_LOCK_TIMEOUT (2 * 1000) /* in msec */ |
| #endif |
| #define WMA_AUTH_REQ_RECV_WAKE_LOCK_TIMEOUT (5 * 1000) /* in msec */ |
| #define WMA_ASSOC_REQ_RECV_WAKE_LOCK_DURATION (5 * 1000) /* in msec */ |
| #define WMA_DEAUTH_RECV_WAKE_LOCK_DURATION (5 * 1000) /* in msec */ |
| #define WMA_DISASSOC_RECV_WAKE_LOCK_DURATION (5 * 1000) /* in msec */ |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| #define WMA_AUTO_SHUTDOWN_WAKE_LOCK_DURATION (5 * 1000) /* in msec */ |
| #endif |
| #define WMA_BMISS_EVENT_WAKE_LOCK_DURATION (4 * 1000) /* in msec */ |
| #define WMA_FW_RSP_EVENT_WAKE_LOCK_DURATION (3 * 1000) /* in msec */ |
| |
| #define WMA_TXMIC_LEN 8 |
| #define WMA_RXMIC_LEN 8 |
| |
| /* |
| * Length = (2 octets for Index and CTWin/Opp PS) and |
| * (13 octets for each NOA Descriptors) |
| */ |
| |
| #define WMA_P2P_NOA_IE_OPP_PS_SET (0x80) |
| #define WMA_P2P_NOA_IE_CTWIN_MASK (0x7F) |
| |
| #define WMA_P2P_IE_ID 0xdd |
| #define WMA_P2P_WFA_OUI { 0x50, 0x6f, 0x9a } |
| #define WMA_P2P_WFA_VER 0x09 /* ver 1.0 */ |
| #define WMA_WSC_OUI { 0x00, 0x50, 0xF2 } /* Microsoft WSC OUI byte */ |
| |
| /* P2P Sub element defintions (according to table 5 of Wifi's P2P spec) */ |
| #define WMA_P2P_SUB_ELEMENT_STATUS 0 |
| #define WMA_P2P_SUB_ELEMENT_MINOR_REASON 1 |
| #define WMA_P2P_SUB_ELEMENT_CAPABILITY 2 |
| #define WMA_P2P_SUB_ELEMENT_DEVICE_ID 3 |
| #define WMA_P2P_SUB_ELEMENT_GO_INTENT 4 |
| #define WMA_P2P_SUB_ELEMENT_CONFIGURATION_TIMEOUT 5 |
| #define WMA_P2P_SUB_ELEMENT_LISTEN_CHANNEL 6 |
| #define WMA_P2P_SUB_ELEMENT_GROUP_BSSID 7 |
| #define WMA_P2P_SUB_ELEMENT_EXTENDED_LISTEN_TIMING 8 |
| #define WMA_P2P_SUB_ELEMENT_INTENDED_INTERFACE_ADDR 9 |
| #define WMA_P2P_SUB_ELEMENT_MANAGEABILITY 10 |
| #define WMA_P2P_SUB_ELEMENT_CHANNEL_LIST 11 |
| #define WMA_P2P_SUB_ELEMENT_NOA 12 |
| #define WMA_P2P_SUB_ELEMENT_DEVICE_INFO 13 |
| #define WMA_P2P_SUB_ELEMENT_GROUP_INFO 14 |
| #define WMA_P2P_SUB_ELEMENT_GROUP_ID 15 |
| #define WMA_P2P_SUB_ELEMENT_INTERFACE 16 |
| #define WMA_P2P_SUB_ELEMENT_OP_CHANNEL 17 |
| #define WMA_P2P_SUB_ELEMENT_INVITATION_FLAGS 18 |
| #define WMA_P2P_SUB_ELEMENT_VENDOR 221 |
| |
| /* Macros for handling unaligned memory accesses */ |
| #define P2PIE_PUT_LE16(a, val) \ |
| do { \ |
| (a)[1] = ((u16) (val)) >> 8; \ |
| (a)[0] = ((u16) (val)) & 0xff; \ |
| } while (0) |
| |
| #define P2PIE_PUT_LE32(a, val) \ |
| do { \ |
| (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \ |
| (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \ |
| (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \ |
| (a)[0] = (u8) (((u32) (val)) & 0xff); \ |
| } while (0) |
| |
| |
| #define WMA_DEFAULT_MAX_PSPOLL_BEFORE_WAKE 1 |
| |
| #define WMA_DEFAULT_QPOWER_MAX_PSPOLL_BEFORE_WAKE 1 |
| #define WMA_DEFAULT_QPOWER_TX_WAKE_THRESHOLD 2 |
| #define WMA_DEFAULT_SIFS_BURST_DURATION 8160 |
| |
| #define WMA_VHT_PPS_PAID_MATCH 1 |
| #define WMA_VHT_PPS_GID_MATCH 2 |
| #define WMA_VHT_PPS_DELIM_CRC_FAIL 3 |
| |
| #define WMA_DFS_MAX_20M_SUB_CH 8 |
| #define WMA_80MHZ_START_CENTER_CH_DIFF 6 |
| #define WMA_160MHZ_START_CENTER_CH_DIFF 14 |
| #define WMA_NEXT_20MHZ_START_CH_DIFF 4 |
| |
| #define WMA_DEFAULT_HW_MODE_INDEX 0xFFFF |
| |
| /** |
| * struct probeTime_dwellTime - probe time, dwell time map |
| * @dwell_time: dwell time |
| * @probe_time: repeat probe time |
| */ |
| typedef struct probeTime_dwellTime { |
| uint8_t dwell_time; |
| uint8_t probe_time; |
| } t_probeTime_dwellTime; |
| |
| static const t_probeTime_dwellTime |
| probe_time_dwell_time_map[WMA_DWELL_TIME_PROBE_TIME_MAP_SIZE] = { |
| {28, 0}, /* 0 SSID */ |
| {28, 20}, /* 1 SSID */ |
| {28, 20}, /* 2 SSID */ |
| {28, 20}, /* 3 SSID */ |
| {28, 20}, /* 4 SSID */ |
| {28, 20}, /* 5 SSID */ |
| {28, 20}, /* 6 SSID */ |
| {28, 11}, /* 7 SSID */ |
| {28, 11}, /* 8 SSID */ |
| {28, 11}, /* 9 SSID */ |
| {28, 8} /* 10 SSID */ |
| }; |
| |
| typedef void (*txFailIndCallback)(uint8_t *peer_mac, uint8_t seqNo); |
| |
| /** |
| * enum t_wma_drv_type - wma driver type |
| * @WMA_DRIVER_TYPE_PRODUCTION: production driver type |
| * @WMA_DRIVER_TYPE_MFG: manufacture driver type |
| * @WMA_DRIVER_TYPE_INVALID: invalid driver type |
| */ |
| typedef enum { |
| WMA_DRIVER_TYPE_PRODUCTION = 0, |
| WMA_DRIVER_TYPE_MFG = 1, |
| WMA_DRIVER_TYPE_INVALID = 0x7FFFFFFF |
| } t_wma_drv_type; |
| |
| #ifdef FEATURE_WLAN_TDLS |
| /** |
| * enum t_wma_tdls_mode - TDLS mode |
| * @WMA_TDLS_SUPPORT_NOT_ENABLED: tdls is disable |
| * @WMA_TDLS_SUPPORT_DISABLED: suppress implicit trigger and not respond to peer |
| * @WMA_TDLS_SUPPORT_EXPLICIT_TRIGGER_ONLY: suppress implicit trigger, |
| * but respond to the peer |
| * @WMA_TDLS_SUPPORT_ENABLED: implicit trigger |
| * @WMA_TDLS_SUPPORT_ACTIVE_EXTERNAL_CONTROL: External control means |
| * implicit trigger but only to a peer mac configured by user space. |
| */ |
| typedef enum { |
| WMA_TDLS_SUPPORT_NOT_ENABLED = 0, |
| WMA_TDLS_SUPPORT_DISABLED, |
| WMA_TDLS_SUPPORT_EXPLICIT_TRIGGER_ONLY, |
| WMA_TDLS_SUPPORT_ENABLED, |
| WMA_TDLS_SUPPORT_ACTIVE_EXTERNAL_CONTROL, |
| } t_wma_tdls_mode; |
| |
| /** |
| * enum wma_tdls_peer_notification - TDLS events |
| * @WMA_TDLS_SHOULD_DISCOVER: tdls discovery recommended for peer (always based |
| * on tx bytes per second > tx_discover threshold |
| * NB: notification will be re-sent after |
| * discovery_request_interval_ms |
| * @WMA_TDLS_SHOULD_TEARDOWN: tdls link tear down recommended for peer |
| * due to tx bytes per second below |
| * tx_teardown_threshold |
| * NB: this notification sent once |
| * @WMA_TDLS_PEER_DISCONNECTED: tx peer TDLS link tear down complete |
| */ |
| enum wma_tdls_peer_notification { |
| WMA_TDLS_SHOULD_DISCOVER, |
| WMA_TDLS_SHOULD_TEARDOWN, |
| WMA_TDLS_PEER_DISCONNECTED, |
| }; |
| |
| /** |
| * enum wma_tdls_peer_reason - TDLS peer reason |
| * @WMA_TDLS_TEARDOWN_REASON_TX: tdls teardown recommended due to low transmits |
| * @WMA_TDLS_TEARDOWN_REASON_RATE: tdls tear down recommended due to |
| * packet rates < AP rates |
| * @WMA_TDLS_TEARDOWN_REASON_RSSI: tdls link tear down recommended |
| * due to poor RSSI |
| * @WMA_TDLS_TEARDOWN_REASON_SCAN: tdls link tear down recommended |
| * due to offchannel scan |
| * @WMA_TDLS_DISCONNECTED_REASON_PEER_DELETE: tdls peer disconnected |
| * due to peer deletion |
| */ |
| enum wma_tdls_peer_reason { |
| WMA_TDLS_TEARDOWN_REASON_TX, |
| WMA_TDLS_TEARDOWN_REASON_RATE, |
| WMA_TDLS_TEARDOWN_REASON_RSSI, |
| WMA_TDLS_TEARDOWN_REASON_SCAN, |
| WMA_TDLS_DISCONNECTED_REASON_PEER_DELETE, |
| }; |
| #endif /* FEATURE_WLAN_TDLS */ |
| |
| /** |
| * enum wma_rx_exec_ctx - wma rx execution context |
| * @WMA_RX_WORK_CTX: work queue context execution |
| * @WMA_RX_TASKLET_CTX: tasklet context execution |
| * @WMA_RX_SERIALIZER_CTX: MC thread context execution |
| * |
| */ |
| enum wma_rx_exec_ctx { |
| WMA_RX_WORK_CTX, |
| WMA_RX_TASKLET_CTX, |
| WMA_RX_SERIALIZER_CTX |
| }; |
| |
| /** |
| * enum wma_phy_idx |
| * @PHY1: to notify caller that PHY1 specific param needed |
| * @PHY2: to notify caller that PHY2 specific param needed |
| * @PHY1_PHY2: to notify caller that both PHY's param needed |
| * Note: Firmware sends phy map in terms of bitmask, so enum |
| * also needs to be defined that way. |
| * |
| * For example, 0x3 = 0011 = BIT0 corresponds to one phy and |
| * BIT1 coresponds to another phy. There is no direct relation between |
| * each bit to particular PHY (ex. PHYA or PHYB). |
| * |
| * In simple terms, 3 means referring both PHYs & 1 or 2 means |
| * referring to either PHYA or PHYB. |
| */ |
| enum wma_phy_idx { |
| PHY1 = 0x1, /* 0x1 */ |
| PHY2, /* 0x2 */ |
| PHY1_PHY2, /* 0x3 */ |
| }; |
| |
| /** |
| * struct wma_mem_chunk - memory chunks |
| * @vaddr: virtual address |
| * @paddr: physical address |
| * @memctx: dma mapped memory |
| * @len: length of data |
| * @req_id: request id |
| * |
| * memory chunck allocated by Host to be managed by FW |
| * used only for low latency interfaces like pcie |
| */ |
| struct wma_mem_chunk { |
| uint32_t *vaddr; |
| uint32_t paddr; |
| qdf_dma_mem_context(memctx); |
| uint32_t len; |
| uint32_t req_id; |
| }; |
| |
| /** |
| * struct p2p_scan_param - p2p scan listen parameters |
| * @scan_id: scan id |
| * @p2p_scan_type: p2p scan type |
| */ |
| struct p2p_scan_param { |
| uint32_t scan_id; |
| tSirP2pScanType p2p_scan_type; |
| }; |
| |
| /** |
| * struct scan_param - scan parameters |
| * @scan_id: scan id |
| * @scan_requestor_id: scan requestor id |
| * @p2p_scan_type: p2p scan type |
| */ |
| struct scan_param { |
| uint32_t scan_id; |
| uint32_t scan_requestor_id; |
| tSirP2pScanType p2p_scan_type; |
| uint32_t chan_freq; |
| }; |
| |
| /** |
| * struct beacon_info - structure to store beacon template |
| * @buf: skb ptr |
| * @len: length |
| * @dma_mapped: is it dma mapped or not |
| * @tim_ie_offset: TIM IE offset |
| * @dtim_count: DTIM count |
| * @seq_no: sequence no |
| * @noa_sub_ie: NOA sub IE |
| * @noa_sub_ie_len: NOA sub IE length |
| * @noa_ie: NOA IE |
| * @p2p_ie_offset: p2p IE offset |
| * @lock: lock |
| */ |
| struct beacon_info { |
| qdf_nbuf_t buf; |
| uint32_t len; |
| uint8_t dma_mapped; |
| uint32_t tim_ie_offset; |
| uint8_t dtim_count; |
| uint16_t seq_no; |
| uint8_t noa_sub_ie[2 + WMA_NOA_IE_SIZE(WMA_MAX_NOA_DESCRIPTORS)]; |
| uint16_t noa_sub_ie_len; |
| uint8_t *noa_ie; |
| uint16_t p2p_ie_offset; |
| qdf_spinlock_t lock; |
| }; |
| |
| /** |
| * struct beacon_tim_ie - structure to store TIM IE of beacon |
| * @tim_ie: tim ie |
| * @tim_len: tim ie length |
| * @dtim_count: dtim count |
| * @dtim_period: dtim period |
| * @tim_bitctl: tim bit control |
| * @tim_bitmap: tim bitmap |
| */ |
| struct beacon_tim_ie { |
| uint8_t tim_ie; |
| uint8_t tim_len; |
| uint8_t dtim_count; |
| uint8_t dtim_period; |
| uint8_t tim_bitctl; |
| uint8_t tim_bitmap[1]; |
| } __ATTRIB_PACK; |
| |
| /** |
| * struct pps - packet power save parameter |
| * @paid_match_enable: paid match enable |
| * @gid_match_enable: gid match enable |
| * @tim_clear: time clear |
| * @dtim_clear: dtim clear |
| * @eof_delim: eof delim |
| * @mac_match: mac match |
| * @delim_fail: delim fail |
| * @nsts_zero: nsts zero |
| * @rssi_chk: RSSI check |
| * @ebt_5g: ebt 5GHz |
| */ |
| struct pps { |
| bool paid_match_enable; |
| bool gid_match_enable; |
| bool tim_clear; |
| bool dtim_clear; |
| bool eof_delim; |
| bool mac_match; |
| bool delim_fail; |
| bool nsts_zero; |
| bool rssi_chk; |
| bool ebt_5g; |
| }; |
| |
| /** |
| * struct qpower_params - qpower related parameters |
| * @max_ps_poll_cnt: max ps poll count |
| * @max_tx_before_wake: max tx before wake |
| * @spec_ps_poll_wake_interval: ps poll wake interval |
| * @max_spec_nodata_ps_poll: no data ps poll |
| */ |
| struct qpower_params { |
| uint32_t max_ps_poll_cnt; |
| uint32_t max_tx_before_wake; |
| uint32_t spec_ps_poll_wake_interval; |
| uint32_t max_spec_nodata_ps_poll; |
| }; |
| |
| |
| /** |
| * struct gtx_config_t - GTX config |
| * @gtxRTMask: for HT and VHT rate masks |
| * @gtxUsrcfg: host request for GTX mask |
| * @gtxPERThreshold: PER Threshold (default: 10%) |
| * @gtxPERMargin: PER margin (default: 2%) |
| * @gtxTPCstep: TCP step (default: 1) |
| * @gtxTPCMin: TCP min (default: 5) |
| * @gtxBWMask: BW mask (20/40/80/160 Mhz) |
| */ |
| typedef struct { |
| uint32_t gtxRTMask[2]; |
| uint32_t gtxUsrcfg; |
| uint32_t gtxPERThreshold; |
| uint32_t gtxPERMargin; |
| uint32_t gtxTPCstep; |
| uint32_t gtxTPCMin; |
| uint32_t gtxBWMask; |
| } gtx_config_t; |
| |
| /** |
| * struct pdev_cli_config_t - store pdev parameters |
| * @ani_enable: ANI is enabled/disable on target |
| * @ani_poll_len: store ANI polling period |
| * @ani_listen_len: store ANI listening period |
| * @ani_ofdm_level: store ANI OFDM immunity level |
| * @ani_cck_level: store ANI CCK immunity level |
| * @cwmenable: Dynamic bw is enable/disable in fw |
| * @txchainmask: tx chain mask |
| * @rxchainmask: rx chain mask |
| * @txpow2g: tx power limit for 2GHz |
| * @txpow5g: tx power limit for 5GHz |
| * @burst_enable: is burst enable/disable |
| * @burst_dur: burst duration |
| * |
| * This structure stores pdev parameters. |
| * Some of these parameters are set in fw and some |
| * parameters are only maintained in host. |
| */ |
| typedef struct { |
| uint32_t ani_enable; |
| uint32_t ani_poll_len; |
| uint32_t ani_listen_len; |
| uint32_t ani_ofdm_level; |
| uint32_t ani_cck_level; |
| uint32_t cwmenable; |
| uint32_t cts_cbw; |
| uint32_t txchainmask; |
| uint32_t rxchainmask; |
| uint32_t txpow2g; |
| uint32_t txpow5g; |
| uint32_t burst_enable; |
| uint32_t burst_dur; |
| } pdev_cli_config_t; |
| |
| /** |
| * struct vdev_cli_config_t - store vdev parameters |
| * @nss: nss width |
| * @ldpc: is ldpc is enable/disable |
| * @tx_stbc: TX STBC is enable/disable |
| * @rx_stbc: RX STBC is enable/disable |
| * @shortgi: short gi is enable/disable |
| * @rtscts_en: RTS/CTS is enable/disable |
| * @chwidth: channel width |
| * @tx_rate: tx rate |
| * @ampdu: ampdu size |
| * @amsdu: amsdu size |
| * @erx_adjust: enable/disable early rx enable |
| * @erx_bmiss_num: target bmiss number per sample |
| * @erx_bmiss_cycle: sample cycle |
| * @erx_slop_step: slop_step value |
| * @erx_init_slop: init slop |
| * @erx_adj_pause: pause adjust enable/disable |
| * @erx_dri_sample: enable/disable drift sample |
| * @pps_params: packet power save parameters |
| * @qpower_params: qpower parameters |
| * @gtx_info: GTX offload info |
| * |
| * This structure stores vdev parameters. |
| * Some of these parameters are set in fw and some |
| * parameters are only maintained in host. |
| */ |
| typedef struct { |
| uint32_t nss; |
| uint32_t ldpc; |
| uint32_t tx_stbc; |
| uint32_t rx_stbc; |
| uint32_t shortgi; |
| uint32_t rtscts_en; |
| uint32_t chwidth; |
| uint32_t tx_rate; |
| uint32_t ampdu; |
| uint32_t amsdu; |
| uint32_t erx_adjust; |
| uint32_t erx_bmiss_num; |
| uint32_t erx_bmiss_cycle; |
| uint32_t erx_slop_step; |
| uint32_t erx_init_slop; |
| uint32_t erx_adj_pause; |
| uint32_t erx_dri_sample; |
| struct pps pps_params; |
| struct qpower_params qpower_params; |
| gtx_config_t gtx_info; |
| } vdev_cli_config_t; |
| |
| /** |
| * struct wma_version_info - Store wmi version info |
| * @major: wmi major version |
| * @minor: wmi minor version |
| * @revision: wmi revision number |
| */ |
| struct wma_version_info { |
| u_int32_t major; |
| u_int32_t minor; |
| u_int32_t revision; |
| }; |
| |
| /** |
| * struct wma_wow - store wow patterns |
| * @magic_ptrn_enable: magic pattern enable/disable |
| * @wow_enable: wow enable/disable |
| * @wow_enable_cmd_sent: is wow enable command sent to fw |
| * @deauth_enable: is deauth wakeup enable/disable |
| * @disassoc_enable: is disassoc wakeup enable/disable |
| * @bmiss_enable: is bmiss wakeup enable/disable |
| * @gtk_pdev_enable: is GTK based wakeup enable/disable |
| * @gtk_err_enable: is GTK error wakeup enable/disable |
| * @lphb_cache: lphb cache |
| * |
| * This structure stores wow patterns and |
| * wow related parameters in host. |
| */ |
| struct wma_wow { |
| bool magic_ptrn_enable; |
| bool wow_enable; |
| bool wow_enable_cmd_sent; |
| bool deauth_enable; |
| bool disassoc_enable; |
| bool bmiss_enable; |
| bool gtk_err_enable[WMA_MAX_SUPPORTED_BSS]; |
| #ifdef FEATURE_WLAN_LPHB |
| /* currently supports only vdev 0. |
| * cache has two entries: one for TCP and one for UDP. |
| */ |
| tSirLPHBReq lphb_cache[2]; |
| #endif |
| }; |
| |
| #ifdef WLAN_FEATURE_11W |
| #define CMAC_IPN_LEN (6) |
| #define WMA_IGTK_KEY_INDEX_4 (4) |
| #define WMA_IGTK_KEY_INDEX_5 (5) |
| |
| /** |
| * struct wma_igtk_ipn_t - GTK IPN info |
| * @ipn: IPN info |
| */ |
| typedef struct { |
| uint8_t ipn[CMAC_IPN_LEN]; |
| } wma_igtk_ipn_t; |
| |
| /** |
| * struct wma_igtk_key_t - GTK key |
| * @key_length: key length |
| * @key: key |
| * @key_id: key id |
| */ |
| typedef struct { |
| uint16_t key_length; |
| uint8_t key[CSR_AES_KEY_LEN]; |
| |
| /* IPN is maintained per iGTK keyID |
| * 0th index for iGTK keyID = 4; |
| * 1st index for iGTK KeyID = 5 |
| */ |
| wma_igtk_ipn_t key_id[2]; |
| } wma_igtk_key_t; |
| #endif |
| |
| /** |
| * struct vdev_restart_params_t - vdev restart parameters |
| * @vdev_id: vdev id |
| * @ssid: ssid |
| * @flags: flags |
| * @requestor_id: requestor id |
| * @chan: channel |
| * @hidden_ssid_restart_in_progress: hidden ssid restart flag |
| * @ssidHidden: is ssid hidden or not |
| */ |
| typedef struct { |
| A_UINT32 vdev_id; |
| wmi_ssid ssid; |
| A_UINT32 flags; |
| A_UINT32 requestor_id; |
| A_UINT32 disable_hw_ack; |
| wmi_channel chan; |
| qdf_atomic_t hidden_ssid_restart_in_progress; |
| uint8_t ssidHidden; |
| } vdev_restart_params_t; |
| |
| /** |
| * struct wma_txrx_node - txrx node |
| * @addr: mac address |
| * @bssid: bssid |
| * @handle: wma handle |
| * @beacon: beacon info |
| * @vdev_restart_params: vdev restart parameters |
| * @config: per vdev config parameters |
| * @scan_info: scan info |
| * @type: type |
| * @sub_type: sub type |
| * @nlo_match_evt_received: is nlo match event received or not |
| * @pno_in_progress: is pno in progress or not |
| * @plm_in_progress: is plm in progress or not |
| * @ptrn_match_enable: is pattern match is enable or not |
| * @num_wow_default_patterns: number of default wow patterns configured for vdev |
| * @num_wow_user_patterns: number of user wow patterns configured for vdev |
| * @conn_state: connection state |
| * @beaconInterval: beacon interval |
| * @llbCoexist: 11b coexist |
| * @shortSlotTimeSupported: is short slot time supported or not |
| * @dtimPeriod: DTIM period |
| * @chanmode: channel mode |
| * @vht_capable: VHT capablity flag |
| * @ht_capable: HT capablity flag |
| * @mhz: channel frequency in KHz |
| * @chan_width: channel bandwidth |
| * @vdev_up: is vdev up or not |
| * @tsfadjust: TSF adjust |
| * @addBssStaContext: add bss context |
| * @aid: association id |
| * @rmfEnabled: Robust Management Frame (RMF) enabled/disabled |
| * @key: GTK key |
| * @uapsd_cached_val: uapsd cached value |
| * @stats_rsp: stats response |
| * @fw_stats_set: fw stats value |
| * @del_staself_req: delete sta self request |
| * @bss_status: bss status |
| * @rate_flags: rate flags |
| * @nss: nss value |
| * @is_channel_switch: is channel switch |
| * @pause_bitmap: pause bitmap |
| * @tx_power: tx power in dbm |
| * @max_tx_power: max tx power in dbm |
| * @nwType: network type (802.11a/b/g/n/ac) |
| * @staKeyParams: sta key parameters |
| * @ps_enabled: is powersave enable/disable |
| * @dtim_policy: DTIM policy |
| * @peer_count: peer count |
| * @roam_synch_in_progress: flag is in progress or not |
| * @plink_status_req: link status request |
| * @psnr_req: snr request |
| * @delay_before_vdev_stop: delay |
| * @tx_streams: number of tx streams can be used by the vdev |
| * @rx_streams: number of rx streams can be used by the vdev |
| * @chain_mask: chain mask can be used by the vdev |
| * @mac_id: the mac on which vdev is on |
| * @wep_default_key_idx: wep default index for group key |
| * @arp_offload_req: cached arp offload request |
| * @ns_offload_req: cached ns offload request |
| * It stores parameters per vdev in wma. |
| */ |
| struct wma_txrx_node { |
| uint8_t addr[IEEE80211_ADDR_LEN]; |
| uint8_t bssid[IEEE80211_ADDR_LEN]; |
| void *handle; |
| struct beacon_info *beacon; |
| vdev_restart_params_t vdev_restart_params; |
| vdev_cli_config_t config; |
| struct scan_param scan_info; |
| struct p2p_scan_param p2p_scan_info; |
| uint32_t type; |
| uint32_t sub_type; |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| bool nlo_match_evt_received; |
| bool pno_in_progress; |
| #endif |
| #ifdef FEATURE_WLAN_ESE |
| bool plm_in_progress; |
| #endif |
| bool ptrn_match_enable; |
| uint8_t num_wow_default_patterns; |
| uint8_t num_wow_user_patterns; |
| bool conn_state; |
| tSirMacBeaconInterval beaconInterval; |
| uint8_t llbCoexist; |
| uint8_t shortSlotTimeSupported; |
| uint8_t dtimPeriod; |
| WLAN_PHY_MODE chanmode; |
| uint8_t vht_capable; |
| uint8_t ht_capable; |
| A_UINT32 mhz; |
| enum phy_ch_width chan_width; |
| bool vdev_active; |
| bool vdev_up; |
| uint64_t tsfadjust; |
| void *addBssStaContext; |
| uint8_t aid; |
| uint8_t rmfEnabled; |
| #ifdef WLAN_FEATURE_11W |
| wma_igtk_key_t key; |
| #endif /* WLAN_FEATURE_11W */ |
| uint32_t uapsd_cached_val; |
| tAniGetPEStatsRsp *stats_rsp; |
| uint8_t fw_stats_set; |
| void *del_staself_req; |
| qdf_atomic_t bss_status; |
| uint8_t rate_flags; |
| uint8_t nss; |
| bool is_channel_switch; |
| uint16_t pause_bitmap; |
| int8_t tx_power; |
| int8_t max_tx_power; |
| uint32_t nwType; |
| void *staKeyParams; |
| bool ps_enabled; |
| uint32_t dtim_policy; |
| uint32_t peer_count; |
| bool roam_synch_in_progress; |
| void *plink_status_req; |
| void *psnr_req; |
| uint8_t delay_before_vdev_stop; |
| #ifdef FEATURE_WLAN_EXTSCAN |
| bool extscan_in_progress; |
| #endif |
| uint32_t alt_modulated_dtim; |
| bool alt_modulated_dtim_enabled; |
| uint32_t tx_streams; |
| uint32_t rx_streams; |
| uint32_t chain_mask; |
| uint32_t mac_id; |
| bool roaming_in_progress; |
| int32_t roam_synch_delay; |
| uint8_t nss_2g; |
| uint8_t nss_5g; |
| bool p2p_lo_in_progress; |
| uint8_t wep_default_key_idx; |
| tSirHostOffloadReq arp_offload_req; |
| tSirHostOffloadReq ns_offload_req; |
| }; |
| |
| #if defined(QCA_WIFI_FTM) |
| #define MAX_UTF_EVENT_LENGTH 2048 |
| #define MAX_WMI_UTF_LEN 252 |
| |
| /** |
| * struct SEG_HDR_INFO_STRUCT - header info |
| * @len: length |
| * @msgref: message refrence |
| * @segmentInfo: segment info |
| * @pad: padding |
| */ |
| typedef struct { |
| A_UINT32 len; |
| A_UINT32 msgref; |
| A_UINT32 segmentInfo; |
| A_UINT32 pad; |
| } SEG_HDR_INFO_STRUCT; |
| |
| /** |
| * struct utf_event_info - UTF event info |
| * @data: data ptr |
| * @length: length |
| * @offset: offset |
| * @currentSeq: curent squence |
| * @expectedSeq: expected sequence |
| */ |
| struct utf_event_info { |
| uint8_t *data; |
| uint32_t length; |
| qdf_size_t offset; |
| uint8_t currentSeq; |
| uint8_t expectedSeq; |
| }; |
| #endif |
| |
| /** |
| * struct scan_timer_info - scan timer info |
| * @vdev_id: vdev id |
| * @scan_id: scan id |
| */ |
| typedef struct { |
| uint8_t vdev_id; |
| uint32_t scan_id; |
| } scan_timer_info; |
| |
| /** |
| * struct ibss_power_save_params - IBSS power save parameters |
| * @atimWindowLength: ATIM window length |
| * @isPowerSaveAllowed: is power save allowed |
| * @isPowerCollapseAllowed: is power collapsed allowed |
| * @isAwakeonTxRxEnabled: is awake on tx/rx enabled |
| * @inactivityCount: inactivity count |
| * @txSPEndInactivityTime: tx SP end inactivity time |
| * @ibssPsWarmupTime: IBSS power save warm up time |
| * @ibssPs1RxChainInAtimEnable: IBSS power save rx chain in ATIM enable |
| */ |
| typedef struct { |
| uint32_t atimWindowLength; |
| uint32_t isPowerSaveAllowed; |
| uint32_t isPowerCollapseAllowed; |
| uint32_t isAwakeonTxRxEnabled; |
| uint32_t inactivityCount; |
| uint32_t txSPEndInactivityTime; |
| uint32_t ibssPsWarmupTime; |
| uint32_t ibssPs1RxChainInAtimEnable; |
| } ibss_power_save_params; |
| |
| /** |
| * struct dbs_hw_mode_info - WLAN_DBS_HW_MODES_TLV Format |
| * @tlv_header: TLV header, TLV tag and len; tag equals WMITLV_TAG_ARRAY_UINT32 |
| * @hw_mode_list: WLAN_DBS_HW_MODE_LIST entries |
| */ |
| struct dbs_hw_mode_info { |
| uint32_t tlv_header; |
| uint32_t *hw_mode_list; |
| }; |
| |
| /* Current HTC credit is 2, pool size of 50 is sufficient */ |
| #define WMI_DESC_POOL_MAX 50 |
| |
| /** |
| * struct wmi_desc_t - wmi management Tx descriptor. |
| * @tx_cmpl_cb_func: completion callback function, when DL completion and |
| * OTA done. |
| * @ota_post_proc_func: Post process callback function registered. |
| * @nbuf: Network buffer to be freed. |
| * @desc_id: WMI descriptor. |
| */ |
| |
| struct wmi_desc_t { |
| pWMATxRxCompFunc tx_cmpl_cb; |
| pWMAAckFnTxComp ota_post_proc_cb; |
| qdf_nbuf_t nbuf; |
| uint32_t desc_id; |
| }; |
| |
| /** |
| * union wmi_desc_elem_t - linked list wmi desc pool. |
| * @next: Pointer next descritor in the pool. |
| * @wmi_desc: wmi descriptor element. |
| */ |
| union wmi_desc_elem_t { |
| union wmi_desc_elem_t *next; |
| struct wmi_desc_t wmi_desc; |
| }; |
| |
| /** |
| * struct dual_mac_config - Dual MAC configurations |
| * @prev_scan_config: Previous scan configuration |
| * @prev_fw_mode_config: Previous FW mode configuration |
| * @cur_scan_config: Current scan configuration |
| * @cur_fw_mode_config: Current FW mode configuration |
| * @req_scan_config: Requested scan configuration |
| * @req_fw_mode_config: Requested FW mode configuration |
| */ |
| struct dual_mac_config { |
| uint32_t prev_scan_config; |
| uint32_t prev_fw_mode_config; |
| uint32_t cur_scan_config; |
| uint32_t cur_fw_mode_config; |
| uint32_t req_scan_config; |
| uint32_t req_fw_mode_config; |
| |
| }; |
| |
| |
| /** |
| * struct wma_ini_config - Structure to hold wma ini configuration |
| * @max_no_of_peers: Max Number of supported |
| * |
| * Placeholder for WMA ini parameters. |
| */ |
| struct wma_ini_config { |
| uint8_t max_no_of_peers; |
| }; |
| |
| /** |
| * struct wmi_valid_channels - Channel details part of WMI_SCAN_CHAN_LIST_CMDID |
| * @num_channels: Number of channels |
| * @channel_list: Channel list |
| */ |
| struct wma_valid_channels { |
| uint8_t num_channels; |
| uint8_t channel_list[MAX_NUM_CHAN]; |
| }; |
| |
| /** |
| * struct hw_mode_idx_to_mac_cap_idx - map between hw_mode to capabilities |
| * @num_of_macs: number of macs/PHYs for given hw_mode through hw_mode_id |
| * @mac_cap_idx: index of the mac/PHY for given hw_mode through hw_mode_id |
| * @hw_mode_id: given hw_mode id |
| */ |
| struct hw_mode_idx_to_mac_cap_idx { |
| uint8_t num_of_macs; |
| uint8_t mac_cap_idx; |
| uint8_t hw_mode_id; |
| }; |
| |
| /** |
| * struct extended_caps - new extended caps given by firmware |
| * @num_hw_modes: number of hardware modes for current SOC |
| * @each_hw_mode_cap: hw mode id to phy id mapping |
| * @each_phy_cap_per_hwmode: PHY's caps for each hw mode |
| * @num_phy_for_hal_reg_cap: number of phy for hal reg cap |
| * @hw_mode_to_mac_cap_map: map between hw_mode to capabilities |
| */ |
| struct extended_caps { |
| WMI_SOC_MAC_PHY_HW_MODE_CAPS num_hw_modes; |
| WMI_HW_MODE_CAPABILITIES *each_hw_mode_cap; |
| WMI_MAC_PHY_CAPABILITIES *each_phy_cap_per_hwmode; |
| WMI_SOC_HAL_REG_CAPABILITIES num_phy_for_hal_reg_cap; |
| WMI_HAL_REG_CAPABILITIES_EXT *each_phy_hal_reg_cap; |
| struct hw_mode_idx_to_mac_cap_idx *hw_mode_to_mac_cap_map; |
| }; |
| |
| /** |
| * struct t_wma_handle - wma context |
| * @wmi_handle: wmi handle |
| * @htc_handle: htc handle |
| * @cds_context: cds handle |
| * @mac_context: mac context |
| * @wma_ready_event: wma rx ready event |
| * @wma_resume_event: wma resume event |
| * @target_suspend: target suspend event |
| * @recovery_event: wma FW recovery event |
| * @max_station: max stations |
| * @max_bssid: max bssid |
| * @frame_xln_reqd: frame transmission required |
| * @driver_type: driver type |
| * @myaddr: current mac address |
| * @hwaddr: mac address from EEPROM |
| * @target_abi_vers: target firmware version |
| * @final_abi_vers: The final ABI version to be used for communicating |
| * @target_fw_version: Target f/w build version |
| * @lpss_support: LPSS feature is supported in target or not |
| * @egap_support: Enhanced Green AP support flag |
| * @wmi_ready: wmi status flag |
| * @wlan_init_status: wlan init status |
| * @qdf_dev: qdf device |
| * @phy_capability: PHY Capability from Target |
| * @max_frag_entry: Max number of Fragment entry |
| * @wmi_service_bitmap: wmi services bitmap received from Target |
| * @wlan_resource_config: resource config |
| * @frameTransRequired: frame transmission required |
| * @wmaGlobalSystemRole: global system role |
| * @tx_frm_download_comp_cb: Tx Frame Compl Cb registered by umac |
| * @tx_frm_download_comp_event: Event to wait for tx download completion |
| * @tx_queue_empty_event: wait for tx queue to get flushed |
| * @umac_ota_ack_cb: Ack Complete Callback registered by umac |
| * @umac_data_ota_ack_cb: ack complete callback |
| * @last_umac_data_ota_timestamp: timestamp when OTA of last umac data was done |
| * @last_umac_data_nbuf: cache nbuf ptr for the last umac data buf |
| * @needShutdown: is shutdown needed or not |
| * @num_mem_chunks: number of memory chunk |
| * @mem_chunks: memory chunks |
| * @tgt_cfg_update_cb: configuration update callback |
| * @dfs_radar_indication_cb: Callback to indicate radar to HDD |
| * @reg_cap: regulatory capablities |
| * @scan_id: scan id |
| * @interfaces: txrx nodes(per vdev) |
| * @pdevconfig: pdev related configrations |
| * @vdev_resp_queue: vdev response queue |
| * @vdev_respq_lock: vdev response queue lock |
| * @ht_cap_info: HT capablity info |
| * @vht_cap_info: VHT capablity info |
| * @vht_supp_mcs: VHT supported MCS |
| * @num_rf_chains: number of RF chains |
| * @utf_event_info: UTF event information |
| * @is_fw_assert: is fw asserted |
| * @wow: wow related patterns & parameters |
| * @no_of_suspend_ind: number of suspend indications |
| * @no_of_resume_ind: number of resume indications |
| * @mArpInfo: arp info |
| * @powersave_mode: power save mode |
| * @ptrn_match_enable_all_vdev: is pattern match is enable/disable |
| * @pGetRssiReq: get RSSI request |
| * @thermal_mgmt_info: Thermal mitigation related info |
| * @roam_offload_enabled: is roam offload enable/disable |
| * @ol_ini_info: store ini status of arp offload, ns offload |
| * @ssdp: ssdp flag |
| * @enable_mc_list : To Check if Multicast list filtering is enabled in FW |
| * @ibss_started: is IBSS started or not |
| * @ibsskey_info: IBSS key info |
| * @dfs_ic: DFS umac interface information |
| * @hddTxFailCb: tx fail indication callback |
| * @pno_wake_lock: PNO wake lock |
| * @extscan_wake_lock: extscan wake lock |
| * @wow_wake_lock: wow wake lock |
| * @wow_nack: wow negative ack flag |
| * @ap_client_cnt: ap client count |
| * @is_wow_bus_suspended: is wow bus suspended flag |
| * @wma_scan_comp_timer: scan completion timer |
| * @dfs_phyerr_filter_offload: dfs phy error filter is offloaded or not |
| * @suitable_ap_hb_failure: better ap found |
| * @wma_ibss_power_save_params: IBSS Power Save config Parameters |
| * @IsRArateLimitEnabled: RA rate limiti s enabled or not |
| * @RArateLimitInterval: RA rate limit interval |
| * @is_lpass_enabled: Flag to indicate if LPASS feature is enabled or not |
| * @is_nan_enabled: Flag to indicate if NaN feature is enabled or not |
| * @staMaxLIModDtim: station max listen interval |
| * @staModDtim: station mode DTIM |
| * @staDynamicDtim: station dynamic DTIM |
| * @enable_mhf_offload: is MHF offload enable/disable |
| * @last_mhf_entries_timestamp: timestamp when last entries where set |
| * @dfs_pri_multiplier: DFS multiplier |
| * @hw_bd_id: hardware board id |
| * @hw_bd_info: hardware board info |
| * @in_d0wow: D0WOW is enable/disable |
| * @miracast_value: miracast value |
| * @log_completion_timer: log completion timer |
| * @mgmt_rx: management rx callback |
| * @num_dbs_hw_modes: Number of HW modes supported by the FW |
| * @dbs_mode: DBS HW mode list |
| * @old_hw_mode_index: Previous configured HW mode index |
| * @new_hw_mode_index: Current configured HW mode index |
| * @extended_caps phy_caps: extended caps per hw mode |
| * @peer_authorized_cb: peer authorized hdd callback |
| * @ocb_callback: callback to OCB commands |
| * @ocb_resp: response to OCB commands |
| * @wow_pno_match_wake_up_count: PNO match wake up count |
| * @wow_pno_complete_wake_up_count: PNO complete wake up count |
| * @wow_gscan_wake_up_count: Gscan wake up count |
| * @wow_low_rssi_wake_up_count: Low rssi wake up count |
| * @wow_rssi_breach_wake_up_count: RSSI breach wake up count |
| * @wow_ucast_wake_up_count: WoW unicast packet wake up count |
| * @wow_bcast_wake_up_count: WoW brodcast packet wake up count |
| * @wow_ipv4_mcast_wake_up_count: WoW IPV4 mcast packet wake up count |
| * @wow_ipv6_mcast_wake_up_count: WoW IPV6 mcast packet wake up count |
| * @wow_ipv6_mcast_ra_stats: WoW IPV6 mcast RA packet wake up count |
| * @wow_ipv6_mcast_ns_stats: WoW IPV6 mcast NS packet wake up count |
| * @wow_ipv6_mcast_na_stats: WoW IPV6 mcast NA packet wake up count |
| * @wow_icmpv4_count: WoW ipv4 icmp packet wake up count |
| * @wow_icmpv6_count: WoW ipv6 icmp packet wake up count |
| * @dual_mac_cfg: Dual mac configuration params for scan and fw mode |
| * |
| * @max_scan: maximum scan requests than can be queued |
| * This structure is global wma context |
| * It contains global wma module parameters and |
| * handle of other modules. |
| * @saved_wmi_init_cmd: Saved WMI INIT command |
| * @bool bpf_packet_filter_enable: BPF filter enabled or not |
| * @service_ready_ext_evt: Wait event for service ready ext |
| * @wmi_cmd_rsp_wake_lock: wmi command response wake lock |
| * @wmi_cmd_rsp_runtime_lock: wmi command response bus lock |
| * @saved_chan: saved channel list sent as part of WMI_SCAN_CHAN_LIST_CMDID |
| */ |
| typedef struct { |
| void *wmi_handle; |
| void *htc_handle; |
| void *cds_context; |
| void *mac_context; |
| qdf_event_t wma_ready_event; |
| qdf_event_t wma_resume_event; |
| qdf_event_t target_suspend; |
| qdf_event_t runtime_suspend; |
| qdf_event_t recovery_event; |
| uint16_t max_station; |
| uint16_t max_bssid; |
| uint32_t frame_xln_reqd; |
| t_wma_drv_type driver_type; |
| uint8_t myaddr[IEEE80211_ADDR_LEN]; |
| uint8_t hwaddr[IEEE80211_ADDR_LEN]; |
| wmi_abi_version target_abi_vers; |
| wmi_abi_version final_abi_vers; |
| uint32_t target_fw_version; |
| #ifdef WLAN_FEATURE_LPSS |
| uint8_t lpss_support; |
| #endif |
| uint8_t ap_arpns_support; |
| #ifdef FEATURE_GREEN_AP |
| bool egap_support; |
| #endif |
| bool wmi_ready; |
| uint32_t wlan_init_status; |
| qdf_device_t qdf_dev; |
| uint32_t phy_capability; |
| uint32_t max_frag_entry; |
| uint32_t wmi_service_bitmap[WMI_SERVICE_BM_SIZE]; |
| wmi_resource_config wlan_resource_config; |
| uint32_t frameTransRequired; |
| tBssSystemRole wmaGlobalSystemRole; |
| pWMATxRxCompFunc tx_frm_download_comp_cb; |
| qdf_event_t tx_frm_download_comp_event; |
| /* |
| * Dummy event to wait for draining MSDUs left in hardware tx |
| * queue and before requesting VDEV_STOP. Nobody will set this |
| * and wait will timeout, and code will poll the pending tx |
| * descriptors number to be zero. |
| */ |
| qdf_event_t tx_queue_empty_event; |
| pWMAAckFnTxComp umac_ota_ack_cb[SIR_MAC_MGMT_RESERVED15]; |
| pWMAAckFnTxComp umac_data_ota_ack_cb; |
| unsigned long last_umac_data_ota_timestamp; |
| qdf_nbuf_t last_umac_data_nbuf; |
| bool needShutdown; |
| uint32_t num_mem_chunks; |
| struct wmi_host_mem_chunk mem_chunks[MAX_MEM_CHUNKS]; |
| wma_tgt_cfg_cb tgt_cfg_update_cb; |
| wma_dfs_radar_indication_cb dfs_radar_indication_cb; |
| HAL_REG_CAPABILITIES reg_cap; |
| uint32_t scan_id; |
| struct wma_txrx_node *interfaces; |
| pdev_cli_config_t pdevconfig; |
| qdf_list_t vdev_resp_queue; |
| qdf_spinlock_t vdev_respq_lock; |
| qdf_list_t wma_hold_req_queue; |
| qdf_spinlock_t wma_hold_req_q_lock; |
| uint32_t ht_cap_info; |
| uint32_t vht_cap_info; |
| uint32_t vht_supp_mcs; |
| uint32_t num_rf_chains; |
| #if defined(QCA_WIFI_FTM) |
| struct utf_event_info utf_event_info; |
| #endif |
| uint8_t is_fw_assert; |
| struct wma_wow wow; |
| uint8_t no_of_suspend_ind; |
| uint8_t no_of_resume_ind; |
| /* Have a back up of arp info to send along |
| * with ns info suppose if ns also enabled |
| */ |
| tSirHostOffloadReq mArpInfo; |
| struct wma_tx_ack_work_ctx *ack_work_ctx; |
| uint8_t powersave_mode; |
| bool ptrn_match_enable_all_vdev; |
| void *pGetRssiReq; |
| t_thermal_mgmt thermal_mgmt_info; |
| bool roam_offload_enabled; |
| /* Here ol_ini_info is used to store ini |
| * status of arp offload, ns offload |
| * and others. Currently 1st bit is used |
| * for arp off load and 2nd bit for ns |
| * offload currently, rest bits are unused |
| */ |
| uint8_t ol_ini_info; |
| bool ssdp; |
| bool enable_mc_list; |
| uint8_t ibss_started; |
| tSetBssKeyParams ibsskey_info; |
| struct ieee80211com *dfs_ic; |
| txFailIndCallback hddTxFailCb; |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| qdf_wake_lock_t pno_wake_lock; |
| #endif |
| #ifdef FEATURE_WLAN_EXTSCAN |
| qdf_wake_lock_t extscan_wake_lock; |
| #endif |
| qdf_wake_lock_t wow_wake_lock; |
| int wow_nack; |
| bool wow_initial_wake_up; |
| qdf_atomic_t is_wow_bus_suspended; |
| qdf_mc_timer_t wma_scan_comp_timer; |
| uint8_t dfs_phyerr_filter_offload; |
| bool suitable_ap_hb_failure; |
| ibss_power_save_params wma_ibss_power_save_params; |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| bool IsRArateLimitEnabled; |
| uint16_t RArateLimitInterval; |
| #endif |
| #ifdef WLAN_FEATURE_LPSS |
| bool is_lpass_enabled; |
| #endif |
| #ifdef WLAN_FEATURE_NAN |
| bool is_nan_enabled; |
| #endif |
| uint8_t staMaxLIModDtim; |
| uint8_t staModDtim; |
| uint8_t staDynamicDtim; |
| uint8_t enable_mhf_offload; |
| unsigned long last_mhf_entries_timestamp; |
| int32_t dfs_pri_multiplier; |
| uint32_t hw_bd_id; |
| uint32_t hw_bd_info[HW_BD_INFO_SIZE]; |
| uint32_t miracast_value; |
| qdf_mc_timer_t log_completion_timer; |
| wma_mgmt_frame_rx_callback mgmt_rx; |
| uint32_t num_dbs_hw_modes; |
| struct dbs_hw_mode_info hw_mode; |
| uint32_t old_hw_mode_index; |
| uint32_t new_hw_mode_index; |
| struct extended_caps phy_caps; |
| qdf_atomic_t scan_id_counter; |
| wma_peer_authorized_fp peer_authorized_cb; |
| uint32_t wow_pno_match_wake_up_count; |
| uint32_t wow_pno_complete_wake_up_count; |
| uint32_t wow_gscan_wake_up_count; |
| uint32_t wow_low_rssi_wake_up_count; |
| uint32_t wow_rssi_breach_wake_up_count; |
| uint32_t wow_ucast_wake_up_count; |
| uint32_t wow_bcast_wake_up_count; |
| uint32_t wow_ipv4_mcast_wake_up_count; |
| uint32_t wow_ipv6_mcast_wake_up_count; |
| uint32_t wow_ipv6_mcast_ra_stats; |
| uint32_t wow_ipv6_mcast_ns_stats; |
| uint32_t wow_ipv6_mcast_na_stats; |
| uint32_t wow_icmpv4_count; |
| uint32_t wow_icmpv6_count; |
| uint32_t wow_oem_response_wake_up_count; |
| |
| /* OCB request contexts */ |
| struct sir_ocb_config *ocb_config_req; |
| struct dual_mac_config dual_mac_cfg; |
| struct { |
| uint16_t pool_size; |
| uint16_t num_free; |
| union wmi_desc_elem_t *array; |
| union wmi_desc_elem_t *freelist; |
| qdf_spinlock_t wmi_desc_pool_lock; |
| } wmi_desc_pool; |
| uint8_t max_scan; |
| uint16_t self_gen_frm_pwr; |
| bool tx_chain_mask_cck; |
| /* Going with a timer instead of wait event because on receiving the |
| * service ready event, we will be waiting on the MC thread for the |
| * service extended ready event which is also processed in MC thread. |
| * This leads to MC thread being stuck. Alternative was to process |
| * these events in tasklet/workqueue context. But, this leads to |
| * race conditions when the events are processed in two different |
| * context. So, processing ready event and extended ready event in |
| * the serialized MC thread context with a timer. |
| */ |
| qdf_mc_timer_t service_ready_ext_timer; |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| void (*csr_roam_synch_cb)(tpAniSirGlobal mac, |
| roam_offload_synch_ind *roam_synch_data, |
| tpSirBssDescription bss_desc_ptr, |
| enum sir_roam_op_code reason); |
| QDF_STATUS (*pe_roam_synch_cb)(tpAniSirGlobal mac, |
| roam_offload_synch_ind *roam_synch_data, |
| tpSirBssDescription bss_desc_ptr); |
| #endif |
| qdf_wake_lock_t wmi_cmd_rsp_wake_lock; |
| qdf_runtime_lock_t wmi_cmd_rsp_runtime_lock; |
| qdf_runtime_lock_t wma_runtime_resume_lock; |
| uint32_t fine_time_measurement_cap; |
| bool bpf_enabled; |
| bool bpf_packet_filter_enable; |
| struct wma_ini_config ini_config; |
| struct wma_valid_channels saved_chan; |
| /* NAN datapath support enabled in firmware */ |
| bool nan_datapath_enabled; |
| QDF_STATUS (*pe_ndp_event_handler)(tpAniSirGlobal mac_ctx, |
| cds_msg_t *msg); |
| bool sub_20_support; |
| } t_wma_handle, *tp_wma_handle; |
| |
| /** |
| * struct wma_target_cap - target capabality |
| * @wmi_service_bitmap: wmi services bitmap |
| * @wlan_resource_config: resource config |
| */ |
| struct wma_target_cap { |
| /* wmi services bitmap received from Target */ |
| uint32_t wmi_service_bitmap[WMI_SERVICE_BM_SIZE]; |
| /* default resource config,the os shim can overwrite it */ |
| wmi_resource_config wlan_resource_config; |
| }; |
| |
| /** |
| * struct t_wma_start_req - wma start request parameters |
| * @pConfigBuffer: config buffer |
| * @usConfigBufferLen: Length of the config buffer above |
| * @driver_type: Production or FTM driver |
| * @pUserData: user data |
| * @pIndUserData: indication function pointer to send to UMAC |
| * |
| * The shared memory between WDI and HAL is 4K so maximum data can be |
| * transferred from WDI to HAL is 4K |
| */ |
| typedef struct { |
| void *pConfigBuffer; |
| uint16_t usConfigBufferLen; |
| t_wma_drv_type driver_type; |
| void *pUserData; |
| void *pIndUserData; |
| } t_wma_start_req; |
| |
| /* Enumeration for Version */ |
| typedef enum { |
| WLAN_HAL_MSG_VERSION0 = 0, |
| WLAN_HAL_MSG_VERSION1 = 1, |
| WLAN_HAL_MSG_WCNSS_CTRL_VERSION = 0x7FFF, /*define as 2 bytes data */ |
| WLAN_HAL_MSG_VERSION_MAX_FIELD = WLAN_HAL_MSG_WCNSS_CTRL_VERSION |
| } tHalHostMsgVersion; |
| |
| /** |
| * struct sHalMacStartParameter - mac start request parameters |
| * @driverType: driver type (production/FTM) |
| * @uConfigBufferLen: length of config buffer |
| */ |
| typedef struct qdf_packed sHalMacStartParameter { |
| tDriverType driverType; |
| uint32_t uConfigBufferLen; |
| |
| /* Following this there is a TLV formatted buffer of length |
| * "uConfigBufferLen" bytes containing all config values. |
| * The TLV is expected to be formatted like this: |
| * 0 15 31 31+CFG_LEN-1 length-1 |
| * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......| |
| */ |
| } tHalMacStartParameter, *tpHalMacStartParameter; |
| |
| extern void cds_wma_complete_cback(void *p_cds_context); |
| extern void wma_send_regdomain_info_to_fw(uint32_t reg_dmn, uint16_t regdmn2G, |
| uint16_t regdmn5G, int8_t ctl2G, |
| int8_t ctl5G); |
| /** |
| * enum frame_index - Frame index |
| * @GENERIC_NODOWNLD_NOACK_COMP_INDEX: Frame index for no download comp no ack |
| * @GENERIC_DOWNLD_COMP_NOACK_COMP_INDEX: Frame index for download comp no ack |
| * @GENERIC_DOWNLD_COMP_ACK_COMP_INDEX: Frame index for download comp and ack |
| * @GENERIC_NODOWLOAD_ACK_COMP_INDEX: Frame index for no download comp and ack |
| * @FRAME_INDEX_MAX: maximum frame index |
| */ |
| enum frame_index { |
| GENERIC_NODOWNLD_NOACK_COMP_INDEX, |
| GENERIC_DOWNLD_COMP_NOACK_COMP_INDEX, |
| GENERIC_DOWNLD_COMP_ACK_COMP_INDEX, |
| GENERIC_NODOWLOAD_ACK_COMP_INDEX, |
| FRAME_INDEX_MAX |
| }; |
| |
| /** |
| * struct wma_tx_ack_work_ctx - tx ack work context |
| * @wma_handle: wma handle |
| * @sub_type: sub type |
| * @status: status |
| * @ack_cmp_work: work structure |
| */ |
| struct wma_tx_ack_work_ctx { |
| tp_wma_handle wma_handle; |
| uint16_t sub_type; |
| int32_t status; |
| qdf_work_t ack_cmp_work; |
| }; |
| |
| /** |
| * struct wma_target_req - target request parameters |
| * @event_timeout: event timeout |
| * @node: list |
| * @user_data: user data |
| * @msg_type: message type |
| * @vdev_id: vdev id |
| * @type: type |
| */ |
| struct wma_target_req { |
| qdf_mc_timer_t event_timeout; |
| qdf_list_node_t node; |
| void *user_data; |
| uint32_t msg_type; |
| uint8_t vdev_id; |
| uint8_t type; |
| }; |
| |
| /** |
| * struct wma_vdev_start_req - vdev start request parameters |
| * @beacon_intval: beacon interval |
| * @dtim_period: dtim period |
| * @max_txpow: max tx power |
| * @chan_offset: channel offset |
| * @is_dfs: is dfs supported or not |
| * @vdev_id: vdev id |
| * @chan: channel |
| * @oper_mode: operating mode |
| * @ssid: ssid |
| * @hidden_ssid: hidden ssid |
| * @pmf_enabled: is pmf enabled or not |
| * @vht_capable: VHT capabality |
| * @ht_capable: HT capabality |
| * @dfs_pri_multiplier: DFS multiplier |
| * @dot11_mode: 802.11 mode |
| * @is_half_rate: is the channel operating at 10MHz |
| * @is_quarter_rate: is the channel operating at 5MHz |
| * @preferred_tx_streams: policy manager indicates the preferred |
| * number of transmit streams |
| * @preferred_rx_streams: policy manager indicates the preferred |
| * number of receive streams |
| */ |
| struct wma_vdev_start_req { |
| uint32_t beacon_intval; |
| uint32_t dtim_period; |
| int32_t max_txpow; |
| enum phy_ch_width chan_width; |
| bool is_dfs; |
| uint8_t vdev_id; |
| uint8_t chan; |
| uint8_t oper_mode; |
| tSirMacSSid ssid; |
| uint8_t hidden_ssid; |
| uint8_t pmf_enabled; |
| uint8_t vht_capable; |
| uint8_t ch_center_freq_seg0; |
| uint8_t ch_center_freq_seg1; |
| uint8_t ht_capable; |
| int32_t dfs_pri_multiplier; |
| uint8_t dot11_mode; |
| bool is_half_rate; |
| bool is_quarter_rate; |
| uint32_t preferred_tx_streams; |
| uint32_t preferred_rx_streams; |
| uint8_t beacon_tx_rate; |
| }; |
| |
| /** |
| * struct wma_set_key_params - set key parameters |
| * @vdev_id: vdev id |
| * @def_key_idx: used to see if we have to read the key from cfg |
| * @key_len: key length |
| * @peer_mac: peer mac address |
| * @singl_tid_rc: 1=Single TID based Replay Count, 0=Per TID based RC |
| * @key_type: key type |
| * @key_idx: key index |
| * @unicast: unicast flag |
| * @key_data: key data |
| */ |
| struct wma_set_key_params { |
| uint8_t vdev_id; |
| /* def_key_idx can be used to see if we have to read the key from cfg */ |
| uint32_t def_key_idx; |
| uint16_t key_len; |
| uint8_t peer_mac[IEEE80211_ADDR_LEN]; |
| uint8_t singl_tid_rc; |
| enum eAniEdType key_type; |
| uint32_t key_idx; |
| bool unicast; |
| uint8_t key_data[SIR_MAC_MAX_KEY_LENGTH]; |
| }; |
| |
| /** |
| * struct t_thermal_cmd_params - thermal command parameters |
| * @minTemp: minimum temprature |
| * @maxTemp: maximum temprature |
| * @thermalEnable: thermal enable |
| */ |
| typedef struct { |
| uint16_t minTemp; |
| uint16_t maxTemp; |
| uint8_t thermalEnable; |
| } t_thermal_cmd_params, *tp_thermal_cmd_params; |
| |
| /** |
| * enum wma_cfg_cmd_id - wma cmd ids |
| * @WMA_VDEV_TXRX_FWSTATS_ENABLE_CMDID: txrx firmware stats enable command |
| * @WMA_VDEV_TXRX_FWSTATS_RESET_CMDID: txrx firmware stats reset command |
| * @WMA_VDEV_MCC_SET_TIME_LATENCY: set MCC latency time |
| * @WMA_VDEV_MCC_SET_TIME_QUOTA: set MCC time quota |
| * @WMA_VDEV_IBSS_SET_ATIM_WINDOW_SIZE: set IBSS ATIM window size |
| * @WMA_VDEV_IBSS_SET_POWER_SAVE_ALLOWED: set IBSS enable power save |
| * @WMA_VDEV_IBSS_SET_POWER_COLLAPSE_ALLOWED: set IBSS power collapse enable |
| * @WMA_VDEV_IBSS_SET_AWAKE_ON_TX_RX: awake IBSS on TX/RX |
| * @WMA_VDEV_IBSS_SET_INACTIVITY_TIME: set IBSS inactivity time |
| * @WMA_VDEV_IBSS_SET_TXSP_END_INACTIVITY_TIME: set IBSS TXSP |
| * @WMA_VDEV_IBSS_PS_SET_WARMUP_TIME_SECS: set IBSS power save warmup time |
| * @WMA_VDEV_IBSS_PS_SET_1RX_CHAIN_IN_ATIM_WINDOW: set IBSS power save ATIM |
| * @WMA_VDEV_DFS_CONTROL_CMDID: DFS control command |
| * @WMA_VDEV_TXRX_GET_IPA_UC_FW_STATS_CMDID: get IPA microcontroller fw stats |
| * |
| * wma command ids for configuration request which |
| * does not involve sending a wmi command. |
| */ |
| enum wma_cfg_cmd_id { |
| WMA_VDEV_TXRX_FWSTATS_ENABLE_CMDID = WMI_CMDID_MAX, |
| WMA_VDEV_TXRX_FWSTATS_RESET_CMDID, |
| WMA_VDEV_MCC_SET_TIME_LATENCY, |
| WMA_VDEV_MCC_SET_TIME_QUOTA, |
| WMA_VDEV_IBSS_SET_ATIM_WINDOW_SIZE, |
| WMA_VDEV_IBSS_SET_POWER_SAVE_ALLOWED, |
| WMA_VDEV_IBSS_SET_POWER_COLLAPSE_ALLOWED, |
| WMA_VDEV_IBSS_SET_AWAKE_ON_TX_RX, |
| WMA_VDEV_IBSS_SET_INACTIVITY_TIME, |
| WMA_VDEV_IBSS_SET_TXSP_END_INACTIVITY_TIME, |
| WMA_VDEV_IBSS_PS_SET_WARMUP_TIME_SECS, |
| WMA_VDEV_IBSS_PS_SET_1RX_CHAIN_IN_ATIM_WINDOW, |
| WMA_VDEV_DFS_CONTROL_CMDID, |
| WMA_VDEV_TXRX_GET_IPA_UC_FW_STATS_CMDID, |
| WMA_CMD_ID_MAX |
| }; |
| |
| /** |
| * struct wma_trigger_uapsd_params - trigger uapsd parameters |
| * @wmm_ac: wmm access catagory |
| * @user_priority: user priority |
| * @service_interval: service interval |
| * @suspend_interval: suspend interval |
| * @delay_interval: delay interval |
| */ |
| typedef struct wma_trigger_uapsd_params { |
| uint32_t wmm_ac; |
| uint32_t user_priority; |
| uint32_t service_interval; |
| uint32_t suspend_interval; |
| uint32_t delay_interval; |
| } t_wma_trigger_uapsd_params, *tp_wma_trigger_uapsd_params; |
| |
| /** |
| * enum uapsd_peer_param_max_sp - U-APSD maximum service period of peer station |
| * @UAPSD_MAX_SP_LEN_UNLIMITED: unlimited max service period |
| * @UAPSD_MAX_SP_LEN_2: max service period = 2 |
| * @UAPSD_MAX_SP_LEN_4: max service period = 4 |
| * @UAPSD_MAX_SP_LEN_6: max service period = 6 |
| */ |
| enum uapsd_peer_param_max_sp { |
| UAPSD_MAX_SP_LEN_UNLIMITED = 0, |
| UAPSD_MAX_SP_LEN_2 = 2, |
| UAPSD_MAX_SP_LEN_4 = 4, |
| UAPSD_MAX_SP_LEN_6 = 6 |
| }; |
| |
| /** |
| * enum uapsd_peer_param_enabled_ac - U-APSD Enabled AC's of peer station |
| * @UAPSD_VO_ENABLED: enable uapsd for voice |
| * @UAPSD_VI_ENABLED: enable uapsd for video |
| * @UAPSD_BK_ENABLED: enable uapsd for background |
| * @UAPSD_BE_ENABLED: enable uapsd for best effort |
| */ |
| enum uapsd_peer_param_enabled_ac { |
| UAPSD_VO_ENABLED = 0x01, |
| UAPSD_VI_ENABLED = 0x02, |
| UAPSD_BK_ENABLED = 0x04, |
| UAPSD_BE_ENABLED = 0x08 |
| }; |
| |
| /** |
| * enum profile_id_t - Firmware profiling index |
| * @PROF_CPU_IDLE: cpu idle profile |
| * @PROF_PPDU_PROC: ppdu processing profile |
| * @PROF_PPDU_POST: ppdu post profile |
| * @PROF_HTT_TX_INPUT: htt tx input profile |
| * @PROF_MSDU_ENQ: msdu enqueue profile |
| * @PROF_PPDU_POST_HAL: ppdu post profile |
| * @PROF_COMPUTE_TX_TIME: tx time profile |
| * @PROF_MAX_ID: max profile index |
| */ |
| enum profile_id_t { |
| PROF_CPU_IDLE, |
| PROF_PPDU_PROC, |
| PROF_PPDU_POST, |
| PROF_HTT_TX_INPUT, |
| PROF_MSDU_ENQ, |
| PROF_PPDU_POST_HAL, |
| PROF_COMPUTE_TX_TIME, |
| PROF_MAX_ID, |
| }; |
| |
| /** |
| * struct p2p_ie - P2P IE structural definition. |
| * @p2p_id: p2p id |
| * @p2p_len: p2p length |
| * @p2p_oui: p2p OUI |
| * @p2p_oui_type: p2p OUI type |
| */ |
| struct p2p_ie { |
| uint8_t p2p_id; |
| uint8_t p2p_len; |
| uint8_t p2p_oui[3]; |
| uint8_t p2p_oui_type; |
| } __packed; |
| |
| /** |
| * struct p2p_noa_descriptor - noa descriptor |
| * @type_count: 255: continuous schedule, 0: reserved |
| * @duration: Absent period duration in micro seconds |
| * @interval: Absent period interval in micro seconds |
| * @start_time: 32 bit tsf time when in starts |
| */ |
| struct p2p_noa_descriptor { |
| uint8_t type_count; |
| uint32_t duration; |
| uint32_t interval; |
| uint32_t start_time; |
| } __packed; |
| |
| /** |
| * struct p2p_sub_element_noa - p2p noa element |
| * @p2p_sub_id: p2p sub id |
| * @p2p_sub_len: p2p sub length |
| * @index: identifies instance of NOA su element |
| * @oppPS: oppPS state of the AP |
| * @ctwindow: ctwindow in TUs |
| * @num_descriptors: number of NOA descriptors |
| * @noa_descriptors: noa descriptors |
| */ |
| struct p2p_sub_element_noa { |
| uint8_t p2p_sub_id; |
| uint8_t p2p_sub_len; |
| uint8_t index; /* identifies instance of NOA su element */ |
| uint8_t oppPS:1, /* oppPS state of the AP */ |
| ctwindow:7; /* ctwindow in TUs */ |
| uint8_t num_descriptors; /* number of NOA descriptors */ |
| struct p2p_noa_descriptor noa_descriptors[WMA_MAX_NOA_DESCRIPTORS]; |
| }; |
| |
| /** |
| * struct wma_decap_info_t - decapsulation info |
| * @hdr: header |
| * @hdr_len: header length |
| */ |
| struct wma_decap_info_t { |
| uint8_t hdr[sizeof(struct ieee80211_qosframe_addr4)]; |
| int32_t hdr_len; |
| }; |
| |
| /** |
| * enum packet_power_save - packet power save params |
| * @WMI_VDEV_PPS_PAID_MATCH: paid match param |
| * @WMI_VDEV_PPS_GID_MATCH: gid match param |
| * @WMI_VDEV_PPS_EARLY_TIM_CLEAR: early tim clear param |
| * @WMI_VDEV_PPS_EARLY_DTIM_CLEAR: early dtim clear param |
| * @WMI_VDEV_PPS_EOF_PAD_DELIM: eof pad delim param |
| * @WMI_VDEV_PPS_MACADDR_MISMATCH: macaddr mismatch param |
| * @WMI_VDEV_PPS_DELIM_CRC_FAIL: delim CRC fail param |
| * @WMI_VDEV_PPS_GID_NSTS_ZERO: gid nsts zero param |
| * @WMI_VDEV_PPS_RSSI_CHECK: RSSI check param |
| * @WMI_VDEV_PPS_5G_EBT: 5G ebt param |
| */ |
| typedef enum { |
| WMI_VDEV_PPS_PAID_MATCH = 0, |
| WMI_VDEV_PPS_GID_MATCH = 1, |
| WMI_VDEV_PPS_EARLY_TIM_CLEAR = 2, |
| WMI_VDEV_PPS_EARLY_DTIM_CLEAR = 3, |
| WMI_VDEV_PPS_EOF_PAD_DELIM = 4, |
| WMI_VDEV_PPS_MACADDR_MISMATCH = 5, |
| WMI_VDEV_PPS_DELIM_CRC_FAIL = 6, |
| WMI_VDEV_PPS_GID_NSTS_ZERO = 7, |
| WMI_VDEV_PPS_RSSI_CHECK = 8, |
| WMI_VDEV_VHT_SET_GID_MGMT = 9, |
| WMI_VDEV_PPS_5G_EBT = 10 |
| } packet_power_save; |
| |
| /** |
| * enum green_tx_param - green tx parameters |
| * @WMI_VDEV_PARAM_GTX_HT_MCS: ht mcs param |
| * @WMI_VDEV_PARAM_GTX_VHT_MCS: vht mcs param |
| * @WMI_VDEV_PARAM_GTX_USR_CFG: user cfg param |
| * @WMI_VDEV_PARAM_GTX_THRE: thre param |
| * @WMI_VDEV_PARAM_GTX_MARGIN: green tx margin param |
| * @WMI_VDEV_PARAM_GTX_STEP: green tx step param |
| * @WMI_VDEV_PARAM_GTX_MINTPC: mintpc param |
| * @WMI_VDEV_PARAM_GTX_BW_MASK: bandwidth mask |
| */ |
| typedef enum { |
| WMI_VDEV_PARAM_GTX_HT_MCS, |
| WMI_VDEV_PARAM_GTX_VHT_MCS, |
| WMI_VDEV_PARAM_GTX_USR_CFG, |
| WMI_VDEV_PARAM_GTX_THRE, |
| WMI_VDEV_PARAM_GTX_MARGIN, |
| WMI_VDEV_PARAM_GTX_STEP, |
| WMI_VDEV_PARAM_GTX_MINTPC, |
| WMI_VDEV_PARAM_GTX_BW_MASK, |
| } green_tx_param; |
| |
| #ifdef FEATURE_WLAN_TDLS |
| /** |
| * struct wma_tdls_params - TDLS parameters |
| * @vdev_id: vdev id |
| * @tdls_state: TDLS state |
| * @notification_interval_ms: notification inerval |
| * @tx_discovery_threshold: tx discovery threshold |
| * @tx_teardown_threshold: tx teardown threashold |
| * @rssi_teardown_threshold: RSSI teardown threshold |
| * @rssi_delta: RSSI delta |
| * @tdls_options: TDLS options |
| * @peer_traffic_ind_window: raffic indication window |
| * @peer_traffic_response_timeout: traffic response timeout |
| * @puapsd_mask: uapsd mask |
| * @puapsd_inactivity_time: uapsd inactivity time |
| * @puapsd_rx_frame_threshold: uapsd rx frame threshold |
| * @teardown_notification_ms: tdls teardown notification interval |
| * @tdls_peer_kickout_threshold: tdls packet threshold for |
| * peer kickout operation |
| */ |
| typedef struct wma_tdls_params { |
| uint32_t vdev_id; |
| uint32_t tdls_state; |
| uint32_t notification_interval_ms; |
| uint32_t tx_discovery_threshold; |
| uint32_t tx_teardown_threshold; |
| int32_t rssi_teardown_threshold; |
| int32_t rssi_delta; |
| uint32_t tdls_options; |
| uint32_t peer_traffic_ind_window; |
| uint32_t peer_traffic_response_timeout; |
| uint32_t puapsd_mask; |
| uint32_t puapsd_inactivity_time; |
| uint32_t puapsd_rx_frame_threshold; |
| uint32_t teardown_notification_ms; |
| uint32_t tdls_peer_kickout_threshold; |
| } t_wma_tdls_params; |
| |
| /** |
| * struct wma_tdls_peer_event - TDLS peer event |
| * @vdev_id: vdev id |
| * @peer_macaddr: peer MAC address |
| * @peer_status: TDLS peer status |
| * @peer_reason: TDLS peer reason |
| */ |
| typedef struct { |
| A_UINT32 vdev_id; |
| wmi_mac_addr peer_macaddr; |
| A_UINT32 peer_status; |
| A_UINT32 peer_reason; |
| } wma_tdls_peer_event; |
| |
| #endif /* FEATURE_WLAN_TDLS */ |
| |
| /** |
| * struct wma_dfs_radar_channel_list - dfs radar channel list |
| * @nchannels: nuber of channels |
| * @channels: Channel number including bonded channels on which |
| * radar is present |
| */ |
| struct wma_dfs_radar_channel_list { |
| A_UINT32 nchannels; |
| uint8_t channels[WMA_DFS_MAX_20M_SUB_CH]; |
| }; |
| |
| /** |
| * struct wma_dfs_radar_indication - Structure to indicate RADAR |
| * @vdev_id: vdev id |
| * @chan_list: Channel list on which RADAR is detected |
| * @dfs_radar_status: Flag to Indicate RADAR presence on the current channel |
| * @use_nol: Flag to indicate use NOL |
| */ |
| struct wma_dfs_radar_indication { |
| A_UINT32 vdev_id; |
| struct wma_dfs_radar_channel_list chan_list; |
| uint32_t dfs_radar_status; |
| int use_nol; |
| }; |
| |
| /** |
| * enum uapsd_ac - U-APSD Access Categories |
| * @UAPSD_BE: best effort |
| * @UAPSD_BK: back ground |
| * @UAPSD_VI: video |
| * @UAPSD_VO: voice |
| */ |
| enum uapsd_ac { |
| UAPSD_BE, |
| UAPSD_BK, |
| UAPSD_VI, |
| UAPSD_VO |
| }; |
| |
| QDF_STATUS wma_disable_uapsd_per_ac(tp_wma_handle wma_handle, |
| uint32_t vdev_id, enum uapsd_ac ac); |
| |
| /** |
| * enum uapsd_up - U-APSD User Priorities |
| * @UAPSD_UP_BE: best effort |
| * @UAPSD_UP_BK: back ground |
| * @UAPSD_UP_RESV: reserve |
| * @UAPSD_UP_EE: Excellent Effort |
| * @UAPSD_UP_CL: Critical Applications |
| * @UAPSD_UP_VI: video |
| * @UAPSD_UP_VO: voice |
| * @UAPSD_UP_NC: Network Control |
| */ |
| enum uapsd_up { |
| UAPSD_UP_BE, |
| UAPSD_UP_BK, |
| UAPSD_UP_RESV, |
| UAPSD_UP_EE, |
| UAPSD_UP_CL, |
| UAPSD_UP_VI, |
| UAPSD_UP_VO, |
| UAPSD_UP_NC, |
| UAPSD_UP_MAX |
| }; |
| |
| /** |
| * struct wma_unit_test_cmd - unit test command parameters |
| * @vdev_id: vdev id |
| * @module_id: module id |
| * @num_args: number of arguments |
| * @args: arguments |
| */ |
| typedef struct wma_unit_test_cmd { |
| uint32_t vdev_id; |
| WLAN_MODULE_ID module_id; |
| uint32_t num_args; |
| uint32_t args[WMA_MAX_NUM_ARGS]; |
| } t_wma_unit_test_cmd; |
| |
| /** |
| * struct wma_roam_invoke_cmd - roam invoke command |
| * @vdev_id: vdev id |
| * @bssid: mac address |
| * @channel: channel |
| */ |
| struct wma_roam_invoke_cmd { |
| uint32_t vdev_id; |
| uint8_t bssid[IEEE80211_ADDR_LEN]; |
| uint32_t channel; |
| }; |
| |
| /** |
| * struct wma_process_fw_event_params - fw event parameters |
| * @wmi_handle: wmi handle |
| * @evt_buf: event buffer |
| */ |
| typedef struct { |
| void *wmi_handle; |
| void *evt_buf; |
| } wma_process_fw_event_params; |
| |
| int wma_process_fw_event_handler(void *ctx, void *ev, uint8_t rx_ctx); |
| |
| A_UINT32 e_csr_auth_type_to_rsn_authmode(eCsrAuthType authtype, |
| eCsrEncryptionType encr); |
| A_UINT32 e_csr_encryption_type_to_rsn_cipherset(eCsrEncryptionType encr); |
| |
| /* |
| * WMA-DFS Hooks |
| */ |
| int ol_if_dfs_attach(struct ieee80211com *ic, void *ptr, void *radar_info); |
| uint64_t ol_if_get_tsf64(struct ieee80211com *ic); |
| int ol_if_dfs_disable(struct ieee80211com *ic); |
| struct dfs_ieee80211_channel *ieee80211_find_channel(struct ieee80211com *ic, |
| int freq, uint32_t flags); |
| int ol_if_dfs_enable(struct ieee80211com *ic, int *is_fastclk, void *pe); |
| uint32_t ieee80211_ieee2mhz(uint32_t chan, uint32_t flags); |
| int ol_if_dfs_get_ext_busy(struct ieee80211com *ic); |
| int ol_if_dfs_get_mib_cycle_counts_pct(struct ieee80211com *ic, |
| uint32_t *rxc_pcnt, uint32_t *rxf_pcnt, |
| uint32_t *txf_pcnt); |
| uint16_t ol_if_dfs_usenol(struct ieee80211com *ic); |
| void ieee80211_mark_dfs(struct ieee80211com *ic, |
| struct dfs_ieee80211_channel *ichan); |
| int wma_dfs_indicate_radar(struct ieee80211com *ic, |
| struct dfs_ieee80211_channel *ichan); |
| uint16_t dfs_usenol(struct ieee80211com *ic); |
| |
| QDF_STATUS wma_trigger_uapsd_params(tp_wma_handle wma_handle, uint32_t vdev_id, |
| tp_wma_trigger_uapsd_params |
| trigger_uapsd_params); |
| |
| /* added to get average snr for both data and beacon */ |
| QDF_STATUS wma_send_snr_request(tp_wma_handle wma_handle, void *pGetRssiReq); |
| |
| |
| QDF_STATUS wma_update_vdev_tbl(tp_wma_handle wma_handle, uint8_t vdev_id, |
| ol_txrx_vdev_handle tx_rx_vdev_handle, |
| uint8_t *mac, uint32_t vdev_type, bool add_del); |
| |
| void wma_send_flush_logs_to_fw(tp_wma_handle wma_handle); |
| void wma_log_completion_timeout(void *data); |
| |
| QDF_STATUS wma_set_rssi_monitoring(tp_wma_handle wma, |
| struct rssi_monitor_req *req); |
| |
| QDF_STATUS wma_send_pdev_set_pcl_cmd(tp_wma_handle wma_handle, |
| struct wmi_pcl_chan_weights *msg); |
| |
| QDF_STATUS wma_send_pdev_set_hw_mode_cmd(tp_wma_handle wma_handle, |
| struct sir_hw_mode *msg); |
| QDF_STATUS wma_get_scan_id(uint32_t *scan_id); |
| |
| QDF_STATUS wma_send_pdev_set_dual_mac_config(tp_wma_handle wma_handle, |
| struct sir_dual_mac_config *msg); |
| QDF_STATUS wma_send_pdev_set_antenna_mode(tp_wma_handle wma_handle, |
| struct sir_antenna_mode_param *msg); |
| QDF_STATUS wma_crash_inject(tp_wma_handle wma_handle, uint32_t type, |
| uint32_t delay_time_ms); |
| |
| struct wma_target_req *wma_fill_vdev_req(tp_wma_handle wma, |
| uint8_t vdev_id, |
| uint32_t msg_type, uint8_t type, |
| void *params, uint32_t timeout); |
| struct wma_target_req *wma_fill_hold_req(tp_wma_handle wma, |
| uint8_t vdev_id, uint32_t msg_type, |
| uint8_t type, void *params, |
| uint32_t timeout); |
| |
| QDF_STATUS wma_vdev_start(tp_wma_handle wma, |
| struct wma_vdev_start_req *req, bool isRestart); |
| |
| void wma_remove_vdev_req(tp_wma_handle wma, uint8_t vdev_id, |
| uint8_t type); |
| |
| int wmi_desc_pool_init(tp_wma_handle wma_handle, uint32_t pool_size); |
| void wmi_desc_pool_deinit(tp_wma_handle wma_handle); |
| struct wmi_desc_t *wmi_desc_get(tp_wma_handle wma_handle); |
| void wmi_desc_put(tp_wma_handle wma_handle, struct wmi_desc_t *wmi_desc); |
| int wma_mgmt_tx_completion_handler(void *handle, uint8_t *cmpl_event_params, |
| uint32_t len); |
| int wma_mgmt_tx_bundle_completion_handler(void *handle, |
| uint8_t *cmpl_event_params, uint32_t len); |
| void wma_set_dfs_region(tp_wma_handle wma, enum dfs_region dfs_region); |
| uint32_t wma_get_vht_ch_width(void); |
| QDF_STATUS |
| wma_config_debug_module_cmd(wmi_unified_t wmi_handle, A_UINT32 param, |
| A_UINT32 val, A_UINT32 *module_id_bitmap, |
| A_UINT32 bitmap_len); |
| #ifdef FEATURE_LFR_SUBNET_DETECTION |
| QDF_STATUS wma_set_gateway_params(tp_wma_handle wma, |
| struct gateway_param_update_req *req); |
| #else |
| static inline QDF_STATUS wma_set_gateway_params(tp_wma_handle wma, |
| struct gateway_param_update_req *req) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| #endif /* FEATURE_LFR_SUBNET_DETECTION */ |
| |
| #if defined(FEATURE_LRO) |
| QDF_STATUS wma_lro_config_cmd(tp_wma_handle wma_handle, |
| struct wma_lro_config_cmd_t *wma_lro_cmd); |
| #else |
| static inline QDF_STATUS wma_lro_config_cmd(tp_wma_handle wma_handle, |
| struct wma_lro_config_cmd_t *wma_lro_cmd) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| #endif |
| void |
| wma_indicate_err(enum ol_rx_err_type err_type, |
| struct ol_error_info *err_info); |
| |
| QDF_STATUS wma_ht40_stop_obss_scan(tp_wma_handle wma_handle, |
| int32_t vdev_id); |
| |
| void wma_process_fw_test_cmd(WMA_HANDLE handle, |
| struct set_fwtest_params *wma_fwtest); |
| |
| QDF_STATUS wma_send_ht40_obss_scanind(tp_wma_handle wma, |
| struct obss_ht40_scanind *req); |
| |
| int wma_get_bpf_caps_event_handler(void *handle, |
| u_int8_t *cmd_param_info, |
| u_int32_t len); |
| uint32_t wma_get_num_of_setbits_from_bitmask(uint32_t mask); |
| QDF_STATUS wma_get_bpf_capabilities(tp_wma_handle wma); |
| QDF_STATUS wma_set_bpf_instructions(tp_wma_handle wma, |
| struct sir_bpf_set_offload *bpf_set_offload); |
| void wma_process_set_pdev_ie_req(tp_wma_handle wma, |
| struct set_ie_param *ie_params); |
| void wma_process_set_pdev_ht_ie_req(tp_wma_handle wma, |
| struct set_ie_param *ie_params); |
| void wma_process_set_pdev_vht_ie_req(tp_wma_handle wma, |
| struct set_ie_param *ie_params); |
| void wma_remove_peer(tp_wma_handle wma, u_int8_t *bssid, |
| u_int8_t vdev_id, ol_txrx_peer_handle peer, |
| bool roam_synch_in_progress); |
| |
| QDF_STATUS wma_add_wow_wakeup_event(tp_wma_handle wma, |
| uint32_t vdev_id, |
| uint32_t bitmap, |
| bool enable); |
| QDF_STATUS wma_create_peer(tp_wma_handle wma, ol_txrx_pdev_handle pdev, |
| ol_txrx_vdev_handle vdev, u8 peer_addr[6], |
| u_int32_t peer_type, u_int8_t vdev_id, |
| bool roam_synch_in_progress); |
| |
| #endif |
| struct wma_ini_config *wma_get_ini_handle(tp_wma_handle wma_handle); |
| WLAN_PHY_MODE wma_chan_phy_mode(u8 chan, enum phy_ch_width chan_width, |
| u8 dot11_mode); |
| |
| #ifdef FEATURE_OEM_DATA_SUPPORT |
| QDF_STATUS wma_start_oem_data_req(tp_wma_handle wma_handle, |
| struct oem_data_req *oem_req); |
| #endif |
| |
| QDF_STATUS wma_enable_disable_caevent_ind(tp_wma_handle wma_handle, |
| uint8_t val); |