| /* |
| * Copyright (c) 2011-2015 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| /** |
| * This file defines WMI services bitmap and the set of WMI services . |
| * defines macrso to set/clear/get different service bits from the bitmap. |
| * the service bitmap is sent up to the host via WMI_READY command. |
| * |
| */ |
| |
| #ifndef _WMI_SERVICES_H_ |
| #define _WMI_SERVICES_H_ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| typedef enum { |
| WMI_SERVICE_BEACON_OFFLOAD = 0, /* beacon offload */ |
| WMI_SERVICE_SCAN_OFFLOAD, /* scan offload */ |
| WMI_SERVICE_ROAM_SCAN_OFFLOAD, /* roam scan offload */ |
| WMI_SERVICE_BCN_MISS_OFFLOAD, /* beacon miss offload */ |
| WMI_SERVICE_STA_PWRSAVE, /* fake sleep + basic power save */ |
| WMI_SERVICE_STA_ADVANCED_PWRSAVE, /* uapsd, pspoll, force sleep */ |
| WMI_SERVICE_AP_UAPSD, /* uapsd on AP */ |
| WMI_SERVICE_AP_DFS, /* DFS on AP */ |
| WMI_SERVICE_11AC, /* supports 11ac */ |
| WMI_SERVICE_BLOCKACK, /* Supports triggering ADDBA/DELBA from host */ |
| WMI_SERVICE_PHYERR, /* PHY error */ |
| WMI_SERVICE_BCN_FILTER, /* Beacon filter support */ |
| WMI_SERVICE_RTT, /* RTT (round trip time) support */ |
| WMI_SERVICE_WOW, /* WOW Support */ |
| WMI_SERVICE_RATECTRL_CACHE, /* Rate-control caching */ |
| WMI_SERVICE_IRAM_TIDS, /* TIDs in IRAM */ |
| WMI_SERVICE_ARPNS_OFFLOAD, /* ARP NS Offload support for STA vdev*/ |
| WMI_SERVICE_NLO, /* Network list offload service */ |
| WMI_SERVICE_GTK_OFFLOAD, /* GTK offload */ |
| WMI_SERVICE_SCAN_SCH, /* Scan Scheduler Service */ |
| WMI_SERVICE_CSA_OFFLOAD, /* CSA offload service */ |
| WMI_SERVICE_CHATTER, /* Chatter service */ |
| WMI_SERVICE_COEX_FREQAVOID, /* FW report freq range to avoid */ |
| WMI_SERVICE_PACKET_POWER_SAVE, /* packet power save service */ |
| WMI_SERVICE_FORCE_FW_HANG, /* Service to test the firmware recovery mechanism */ |
| WMI_SERVICE_GPIO, /* GPIO service */ |
| WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, /* Modulated DTIM support */ |
| WMI_STA_UAPSD_BASIC_AUTO_TRIG, /* Basic version of station UAPSD AC Trigger Generation Method with |
| * variable tigger periods (service, delay, and suspend intervals) */ |
| WMI_STA_UAPSD_VAR_AUTO_TRIG, /* Station UAPSD AC Trigger Generation Method with variable |
| * trigger periods (service, delay, and suspend intervals) */ |
| WMI_SERVICE_STA_KEEP_ALIVE, /* Serivce to support the STA KEEP ALIVE mechanism */ |
| WMI_SERVICE_TX_ENCAP, /* Packet type for TX encapsulation */ |
| WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, /* detect out-of-sync sleeping stations */ |
| WMI_SERVICE_EARLY_RX, /* adaptive early-rx feature */ |
| WMI_SERVICE_STA_SMPS, /* STA MIMO-PS */ |
| WMI_SERVICE_FWTEST, /* Firmware test service */ |
| WMI_SERVICE_STA_WMMAC, /* STA WMMAC */ |
| WMI_SERVICE_TDLS, /* TDLS support */ |
| WMI_SERVICE_BURST, /* SIFS spaced burst support */ |
| WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, /* Dynamic beaocn interval change for SAP/P2p GO in MCC scenario */ |
| WMI_SERVICE_ADAPTIVE_OCS, /* Service to support adaptive off-channel scheduler */ |
| WMI_SERVICE_BA_SSN_SUPPORT, /* target will provide Sequence number for the peer/tid combo */ |
| WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, |
| WMI_SERVICE_WLAN_HB, /* wlan HB service */ |
| WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, /* support LTE/WLAN antenna sharing */ |
| WMI_SERVICE_BATCH_SCAN, /*Service to support batch scan */ |
| WMI_SERVICE_QPOWER, /* QPower service */ |
| WMI_SERVICE_PLMREQ, |
| WMI_SERVICE_THERMAL_MGMT, |
| WMI_SERVICE_RMC, /* RMC support */ |
| WMI_SERVICE_MHF_OFFLOAD, /* multi-hop forwarding offload */ |
| WMI_SERVICE_COEX_SAR, /* target support SAR tx limit from WMI_PDEV_PARAM_TXPOWER_LIMITxG */ |
| WMI_SERVICE_BCN_TXRATE_OVERRIDE, /* Will support the bcn/prb rsp rate override */ |
| WMI_SERVICE_NAN, /* Neighbor Awareness Network */ |
| WMI_SERVICE_L1SS_STAT, /* L1SS statistics counter report */ |
| WMI_SERVICE_ESTIMATE_LINKSPEED, /* Linkspeed Estimation per peer */ |
| WMI_SERVICE_OBSS_SCAN, /* Service to support OBSS scan */ |
| WMI_SERVICE_TDLS_OFFCHAN, /* TDLS off channel support */ |
| WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, /* TDLS UAPSD Buffer STA support */ |
| WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, /* TDLS UAPSD Sleep STA support */ |
| WMI_SERVICE_IBSS_PWRSAVE, /* IBSS power save support */ |
| WMI_SERVICE_LPASS, /*Service to support LPASS */ |
| WMI_SERVICE_EXTSCAN, /* Extended Scans */ |
| WMI_SERVICE_D0WOW, /* D0-WOW Support */ |
| WMI_SERVICE_HSOFFLOAD, /* Hotspot offload feature Support */ |
| WMI_SERVICE_ROAM_HO_OFFLOAD, /* roam handover offload */ |
| WMI_SERVICE_RX_FULL_REORDER, /* target-based Rx full reorder */ |
| WMI_SERVICE_DHCP_OFFLOAD, /* DHCP offload support */ |
| WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, /* STA RX DATA offload to IPA support */ |
| WMI_SERVICE_MDNS_OFFLOAD, /* mDNS responder offload support */ |
| WMI_SERVICE_SAP_AUTH_OFFLOAD, /* softap auth offload */ |
| WMI_SERVICE_DUAL_BAND_SIMULTANEOUS_SUPPORT, /* Dual Band Simultaneous support */ |
| WMI_SERVICE_OCB, /* OCB mode support */ |
| WMI_SERVICE_AP_ARPNS_OFFLOAD, /* arp offload support for ap mode vdev */ |
| WMI_SERVICE_PER_BAND_CHAINMASK_SUPPORT, /* Per band chainmask support */ |
| WMI_SERVICE_PACKET_FILTER_OFFLOAD, /* Per vdev packet filters */ |
| WMI_SERVICE_MGMT_TX_HTT, /* Mgmt Tx via HTT interface */ |
| WMI_SERVICE_MGMT_TX_WMI, /* Mgmt Tx via WMI interface */ |
| WMI_SERVICE_EXT_MSG, /* WMI_SERVICE_READY_EXT msg follows */ |
| WMI_SERVICE_MAWC, /* Motion Aided WiFi Connectivity (MAWC)*/ |
| |
| /* target will send ASSOC_CONF after ASSOC_CMD is processed */ |
| WMI_SERVICE_PEER_ASSOC_CONF, |
| |
| /* enhanced green ap support */ |
| WMI_SERVICE_EGAP, |
| /* FW supports 11W PMF Offload for STA */ |
| WMI_SERVICE_STA_PMF_OFFLOAD, |
| |
| WMI_MAX_SERVICE = 128 /* max service */ |
| } WMI_SERVICE; |
| |
| #define WMI_SERVICE_BM_SIZE ((WMI_MAX_SERVICE + sizeof(A_UINT32)- 1)/sizeof(A_UINT32)) |
| |
| /* |
| * depreciated the name WMI_SERVICE_ROAM_OFFLOAD, but here to help compiling |
| * with old host driver |
| */ |
| #define WMI_SERVICE_ROAM_OFFLOAD WMI_SERVICE_ROAM_SCAN_OFFLOAD |
| |
| /* |
| * turn on the WMI service bit corresponding to the WMI service. |
| */ |
| #define WMI_SERVICE_ENABLE(pwmi_svc_bmap,svc_id) \ |
| ( (pwmi_svc_bmap)[(svc_id)/(sizeof(A_UINT32))] |= \ |
| (1 << ((svc_id)%(sizeof(A_UINT32)))) ) |
| |
| #define WMI_SERVICE_DISABLE(pwmi_svc_bmap,svc_id) \ |
| ( (pwmi_svc_bmap)[(svc_id)/(sizeof(A_UINT32))] &= \ |
| ( ~(1 << ((svc_id)%(sizeof(A_UINT32)))) ) ) |
| |
| #define WMI_SERVICE_IS_ENABLED(pwmi_svc_bmap,svc_id) \ |
| ( ((pwmi_svc_bmap)[(svc_id)/(sizeof(A_UINT32))] & \ |
| (1 << ((svc_id)%(sizeof(A_UINT32)))) ) != 0) |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| #endif /*_WMI_SERVICES_H_*/ |