| /* |
| * Copyright (c) 2016-2017 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /** |
| * DOC: cds_config.h |
| * |
| * Defines the configuration Information for various modules. Default values |
| * are read from the INI file and saved into cds_config_info which are passed |
| * to various modules for the initialization. |
| */ |
| |
| #if !defined(__CDS_CONFIG_H) |
| #define __CDS_CONFIG_H |
| |
| #include "osdep.h" |
| #include "cdp_txrx_mob_def.h" |
| |
| /** |
| * enum cfg_sub_20_channel_width: ini values for su 20 mhz channel width |
| * @WLAN_SUB_20_CH_WIDTH_5: Use 5 mhz channel width |
| * @WLAN_SUB_20_CH_WIDTH_10: Use 10 mhz channel width |
| */ |
| enum cfg_sub_20_channel_width { |
| WLAN_SUB_20_CH_WIDTH_NONE = 0, |
| WLAN_SUB_20_CH_WIDTH_5 = 1, |
| WLAN_SUB_20_CH_WIDTH_10 = 2, |
| }; |
| |
| /** |
| * enum active_bpf_mode - the modes active BPF can operate in |
| * @ACTIVE_BPF_DISABLED: BPF is disabled in active mode |
| * @ACTIVE_BPF_ENABLED: BPF is enabled for all packets |
| * @ACTIVE_BPF_ADAPTIVE: BPF is enabled for packets up to some threshold |
| * @ACTIVE_BPF_MODE_COUNT: The number of active BPF modes |
| */ |
| enum active_bpf_mode { |
| ACTIVE_BPF_DISABLED = 0, |
| ACTIVE_BPF_ENABLED, |
| ACTIVE_BPF_ADAPTIVE, |
| ACTIVE_BPF_MODE_COUNT |
| }; |
| |
| /** |
| * struct cds_config_info - Place Holder for cds configuration |
| * @max_station: Max station supported |
| * @max_bssid: Max Bssid Supported |
| * @powersave_offload_enabled: Indicate if powersave offload is enabled |
| * @sta_maxlimod_dtim: station max listen interval |
| * @sta_mod_dtim: station mode DTIM |
| * @sta_dynamic_dtim: station dynamic DTIM |
| * @driver_type: Enumeration of Driver Type whether FTM or Mission mode |
| * @max_wow_filters: Max wow filters to be configured to fw |
| * @wow_enable: Indicate whether wow is enabled or not |
| * @ol_ini_info: Status of offload enabled from ini 1st bit for arm,2nd for NS |
| * currently rest of bits are not used |
| * @ssdp: Indicate ssdp is enabled or not |
| * @enable_mc_list : To Check if Multicast list filtering is enabled in FW |
| * @dfs_phyerr_filter_offload: DFS Phyerror Filtering offload status from ini |
| * Indicates whether support is enabled or not |
| * @ap_disable_intrabss_fwd: pass intra-bss-fwd info to txrx module |
| * @ap_maxoffload_peers: max offload peer |
| * @ap_maxoffload_reorderbuffs: max offload reorder buffs |
| * @ra_ratelimit_interval: RA rate limit value |
| * @is_ra_ratelimit_enabled: Indicate RA rate limit enabled or not |
| * @reorder_offload: is RX re-ordering offloaded to the fw |
| * @dfs_pri_multiplier: dfs radar pri multiplier |
| * @uc_offload_enabled: IPA Micro controller data path offload enable flag |
| * @uc_txbuf_count: IPA Micro controller data path offload TX buffer count |
| * @uc_txbuf_size: IPA Micro controller data path offload TX buffer size |
| * @uc_rxind_ringcount: IPA Micro controller data path offload RX indication |
| * ring count |
| * @uc_tx_partition_base: IPA Micro controller datapath offload TX partition |
| * base |
| * @enable_rxthread: Rx processing in thread from TXRX |
| * @ip_tcp_udp_checksum_offload: checksum offload enabled or not |
| * @ce_classify_enabled: CE based classification enabled |
| * @max_scan: Maximum number of parallel scans |
| * @tx_flow_stop_queue_th: Threshold to stop queue in percentage |
| * @tx_flow_start_queue_offset: Start queue offset in percentage |
| * @is_lpass_enabled: Indicate whether LPASS is enabled or not |
| * @is_nan_enabled: Indicate whether NAN is enabled or not |
| * @bool bpf_packet_filter_enable; Indicate bpf filter enabled or not |
| * @tx_chain_mask_cck: Tx chain mask enabled or not |
| * @self_gen_frm_pwr: Self gen from power |
| * @sub_20_channel_width: Sub 20 MHz ch width, ini intersected with fw cap |
| * @flow_steering_enabled: Receive flow steering. |
| * @is_fw_timeout: Indicate whether crash host when fw timesout or not |
| * @active_uc_bpf_mode: Setting that determines how BPF is applied in active |
| * mode for uc packets |
| * @active_mc_bc_bpf_mode: Setting that determines how BPF is applied in |
| * active mode for MC/BC packets |
| * @auto_power_save_fail_mode: auto detect power save failure mode |
| * @ito_repeat_count: Indicates ito repeated count |
| * Structure for holding cds ini parameters. |
| */ |
| |
| struct cds_config_info { |
| uint16_t max_station; |
| uint16_t max_bssid; |
| uint8_t powersave_offload_enabled; |
| uint8_t sta_maxlimod_dtim; |
| uint8_t sta_mod_dtim; |
| uint8_t sta_dynamic_dtim; |
| enum qdf_driver_type driver_type; |
| uint8_t max_wow_filters; |
| uint8_t wow_enable; |
| uint8_t ol_ini_info; |
| bool ssdp; |
| bool enable_mc_list; |
| uint8_t dfs_phyerr_filter_offload; |
| uint8_t ap_disable_intrabss_fwd; |
| uint8_t ap_maxoffload_peers; |
| uint8_t ap_maxoffload_reorderbuffs; |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| uint16_t ra_ratelimit_interval; |
| bool is_ra_ratelimit_enabled; |
| #endif |
| uint8_t reorder_offload; |
| int32_t dfs_pri_multiplier; |
| uint8_t uc_offload_enabled; |
| uint32_t uc_txbuf_count; |
| uint32_t uc_txbuf_size; |
| uint32_t uc_rxind_ringcount; |
| uint32_t uc_tx_partition_base; |
| bool enable_rxthread; |
| bool ip_tcp_udp_checksum_offload; |
| bool ce_classify_enabled; |
| uint8_t max_scan; |
| #ifdef QCA_LL_TX_FLOW_CONTROL_V2 |
| uint32_t tx_flow_stop_queue_th; |
| uint32_t tx_flow_start_queue_offset; |
| #endif |
| #ifdef WLAN_FEATURE_LPSS |
| bool is_lpass_enabled; |
| #endif |
| #ifdef WLAN_FEATURE_NAN |
| bool is_nan_enabled; |
| #endif |
| bool bpf_packet_filter_enable; |
| bool tx_chain_mask_cck; |
| uint16_t self_gen_frm_pwr; |
| enum cfg_sub_20_channel_width sub_20_channel_width; |
| bool flow_steering_enabled; |
| bool self_recovery_enabled; |
| bool fw_timeout_crash; |
| struct ol_tx_sched_wrr_ac_specs_t ac_specs[TX_WMM_AC_NUM]; |
| enum active_bpf_mode active_uc_bpf_mode; |
| enum active_bpf_mode active_mc_bc_bpf_mode; |
| bool auto_power_save_fail_mode; |
| uint8_t ito_repeat_count; |
| }; |
| |
| #ifdef WLAN_FEATURE_FILS_SK |
| #define MAX_PMK_LEN 48 |
| #define FILS_MAX_KEYNAME_NAI_LENGTH 255 |
| #define FILS_MAX_REALM_LEN 255 |
| #define FILS_MAX_RRK_LENGTH 64 |
| |
| struct cds_fils_connection_info { |
| bool is_fils_connection; |
| uint8_t keyname_nai[FILS_MAX_KEYNAME_NAI_LENGTH]; |
| uint32_t key_nai_length; |
| uint16_t sequence_number; |
| uint8_t r_rk[FILS_MAX_RRK_LENGTH]; |
| uint32_t r_rk_length; |
| uint8_t realm[FILS_MAX_REALM_LEN]; |
| uint32_t realm_len; |
| uint8_t akm_type; |
| uint8_t auth_type; |
| uint8_t pmk[MAX_PMK_LEN]; |
| uint8_t pmk_len; |
| uint8_t pmkid[16]; |
| }; |
| #endif |
| #endif /* !defined( __CDS_CONFIG_H ) */ |