components/mlme/dispatcher/inc/cfg_mlme_generic.h - platform/vendor/qcom-opensource/wlan/qcacld-3.0 - Gitiles

 /*
  * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for
  * any purpose with or without fee is hereby granted, provided that the
  * above copyright notice and this permission notice appear in all
  * copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
  * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
  * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
  * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
  * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  * PERFORMANCE OF THIS SOFTWARE.
  */

 /**
  * DOC: This file contains centralized definitions of converged configuration.
  */

 #ifndef __CFG_MLME_GENERIC_H
 #define __CFG_MLME_GENERIC_H

 #ifdef WLAN_FEATURE_11W
 #define CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE	CFG_INI_UINT
 #define CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE	CFG_INI_UINT
 #else
 #define CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE	CFG_UINT
 #define CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE	CFG_UINT
 #endif /*WLAN_FEATURE_11W*/

 /*
  * pmfSaQueryMaxRetries - Control PMF SA query retries for SAP
  * @Min: 0
  * @Max: 20
  * @Default: 5
  *
  * This ini to set the number of PMF SA query retries for SAP
  *
  * Related: None.
  *
  * Supported Feature: PMF(11W)
  *
  */
 #define CFG_PMF_SA_QUERY_MAX_RETRIES CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE( \
 		"pmfSaQueryMaxRetries", \
 		0, \
 		20, \
 		5, \
 		CFG_VALUE_OR_DEFAULT, \
 		"PMF SA query retries for SAP")
 /*
  * pmfSaQueryRetryInterval - Control PMF SA query retry interval
  * for SAP in ms
  * @Min: 10
  * @Max: 2000
  * @Default: 200
  *
  * This ini to set the PMF SA query retry interval for SAP in ms
  *
  * Related: None.
  *
  * Supported Feature: PMF(11W)
  *
  */
 #define CFG_PMF_SA_QUERY_RETRY_INTERVAL CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE( \
 		"pmfSaQueryRetryInterval", \
 		10, \
 		2000, \
 		200, \
 		CFG_VALUE_OR_DEFAULT, \
 		"PMF SA query retry interval for SAP")

 #define CFG_RTT3_ENABLE CFG_BOOL( \
 		"rtt3_enabled", \
 		1, \
 		"RTT3 enable/disable info")

 /*
  * <ini>
  * BandCapability - Preferred band (0: Both,  1: 2.4G only,  2: 5G only)
  * @Min: 0
  * @Max: 2
  * @Default: 0
  *
  * This ini is used to set default band capability
  * (0: Both, 1: 2.4G only, 2: 5G only)
  *
  * Related: None
  *
  * Supported Feature: STA
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_BAND_CAPABILITY CFG_INI_UINT( \
 	"BandCapability", \
 	0, \
 	2, \
 	0, \
 	CFG_VALUE_OR_DEFAULT, \
 	"Band Capability")

 /*
  * <ini>
  * gPreventLinkDown - Enable to prevent bus link from going down
  * @Min: 0
  * @Max: 1
  * @Default: 0
  *
  * Enable to prevent bus link from going down. Useful for platforms that do not
  * (yet) support link down suspend cases.
  *
  * Related: N/A
  *
  * Supported Feature: Suspend/Resume
  *
  * Usage: Internal
  *
  * </ini>
  */
 #if defined(QCA_WIFI_NAPIER_EMULATION) || defined(QCA_WIFI_QCA6290)
 #define CFG_PREVENT_LINK_DOWN CFG_INI_BOOL( \
 	"gPreventLinkDown", \
 	1, \
 	"Prevent Bus Link Down")
 #else
 #define CFG_PREVENT_LINK_DOWN CFG_INI_BOOL( \
 	"gPreventLinkDown", \
 	0, \
 	"Prevent Bus Link Down")
 #endif /* QCA_WIFI_NAPIER_EMULATION */

 /*
  * <ini>
  * gSelect5GHzMargin - Sets RSSI preference for 5GHz over 2.4GHz AP.
  * @Min: 0
  * @Max: 60
  * @Default: 0
  *
  * Prefer connecting to 5G AP even if its RSSI is lower by gSelect5GHzMargin
  * dBm than 2.4G AP. This feature requires the dependent cfg.ini
  * "gRoamPrefer5GHz" set to 1
  *
  * Related: gRoamPrefer5GHz
  *
  * Supported Feature: Roaming
  *
  * Usage: External
  *
  * </ini>
  */
 #define CFG_SELECT_5GHZ_MARGIN CFG_INI_UINT( \
 	"gSelect5GHzMargin", \
 	0, \
 	60, \
 	0, \
 	CFG_VALUE_OR_DEFAULT, \
 	"Select 5Ghz Margin")

 /*
  * <ini>
  * gEnableMemDeepSleep - Sets Memory Deep Sleep on/off.
  * @Min: 0
  * @Max: 1
  * @Default: 1
  *
  *
  * Related: None
  *
  * Supported Feature: General
  *
  * Usage: External
  *
  * </ini>
  */
 #define CFG_ENABLE_MEM_DEEP_SLEEP CFG_INI_BOOL( \
 	"gEnableMemDeepSleep", \
 	1, \
 	"Enable Memory Deep Sleep")

 /*
  * <ini>
  *
  * gEnableCckTxFirOverride - Enable/disable CCK TxFIR Override
  * @Min: 0 (disabled)
  * @Max: 1 (enabled)
  * @Default: 0 (disabled)
  *
  * When operating in an 802.11b mode, this configuration item forces a 2x2 radio
  * configuration into 1x for Tx and 2x for Rx (ie 1x2) for regulatory compliance
  * reasons.
  *
  * Related: enable2x2
  *
  * Supported Feature: 802.11b, 2x2
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_ENABLE_CCK_TX_FIR_OVERRIDE CFG_INI_BOOL( \
 	"gEnableCckTxFirOverride", \
 	0, \
 	"Enable CCK TX FIR Override")

 /*
  * <ini>
  *
  * gEnableForceTargetAssert - Enable/disable SSR
  * @Min: 0 (disabled)
  * @Max: 1 (enabled)
  * @Default: 0 (disabled)
  *
  * This INI item is used to control subsystem restart(SSR) test framework
  * Set it's value to 1 to enable APPS trigerred SSR testing
  *
  * Related: None
  *
  * Supported Feature: General
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_ENABLE_CRASH_INJECT CFG_INI_BOOL( \
 	"gEnableForceTargetAssert", \
 	0, \
 	"Enable Crash Inject")

 /*
  * <ini>
  *
  * gEnableLpassSupport - Enable/disable LPASS Support
  * @Min: 0 (disabled)
  * @Max: 1 (enabled)
  * @Default: 0 (disabled)
  *
  * Related: None
  *
  * Supported Feature: General
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #ifdef WLAN_FEATURE_LPSS
 #define CFG_ENABLE_LPASS_SUPPORT CFG_INI_BOOL( \
 	"gEnableLpassSupport", \
 	0, \
 	"Enable LPASS Support")
 #else
 #define CFG_ENABLE_LPASS_SUPPORT CFG_BOOL( \
 	"gEnableLpassSupport", \
 	0, \
 	"Enable LPASS Support")
 #endif

 /*
  * <ini>
  *
  * gEnableSelfRecovery - Enable/disable Self Recovery
  * @Min: 0 (disabled)
  * @Max: 1 (enabled)
  * @Default: 0 (disabled)
  *
  * Related: None
  *
  * Supported Feature: General
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_ENABLE_SELF_RECOVERY CFG_INI_BOOL( \
 	"gEnableSelfRecovery", \
 	0, \
 	"Enable Self Recovery")

 /*
  * <ini>
  *
  * gSapDot11mc - Enable/disable SAP 802.11mc support
  * @Min: 0 (disabled)
  * @Max: 1 (enabled)
  * @Default: 0 (disabled)
  *
  * Related: None
  *
  * Supported Feature: General
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_SAP_DOT11MC CFG_INI_BOOL( \
 	"gSapDot11mc", \
 	0, \
 	"SAP 802.11mc support")

 /*
  * <ini>
  *
  * gEnableFatalEvent - Enable/Disable BUG report in case of fatal event
  * @Min: 0 (disabled)
  * @Max: 1 (enabled)
  * @Default: 1 (enabled)
  *
  * Related: None
  *
  * Supported Feature: General
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_ENABLE_FATAL_EVENT_TRIGGER CFG_INI_BOOL( \
 	"gEnableFatalEvent", \
 	1, \
 	"Enable Fatal Event Trigger")

 /*
  * <ini>
  * gSub20ChannelWidth - Control sub 20 channel width (5/10 Mhz)
  * @Min: 0
  * @Max: 2
  * @Default: 0
  *
  * This ini is used to set the sub 20 channel width.
  * gSub20ChannelWidth=0: indicates do not use Sub 20 MHz bandwidth
  * gSub20ChannelWidth=1: Bring up SAP/STA in 5 MHz bandwidth
  * gSub20ChannelWidth=2: Bring up SAP/STA in 10 MHz bandwidth
  *
  * Related: None
  *
  * Supported Feature: 5/10 Mhz channel width support
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_SUB_20_CHANNEL_WIDTH CFG_INI_UINT( \
 	"gSub20ChannelWidth", \
 	0, \
 	2, \
 	0, \
 	CFG_VALUE_OR_DEFAULT, \
 	"Sub 20 Channel Width")

 /*
  * <ini>
  * goptimize_chan_avoid_event - Optimize channel avoidance indication
  *				coming from firmware
  * @Min: 0
  * @Max: 1
  * @Default: 0
  *
  * Related: None
  *
  * Supported Feature: General
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_OPTIMIZE_CA_EVENT CFG_INI_BOOL( \
 	"goptimize_chan_avoid_event", \
 	0, \
 	"Optimize FW CA Event")

 /*
  * <ini>
  * fw_timeout_crash - Enable/Disable BUG ON
  * @Min: 0
  * @Max: 1
  * @Default: 1
  *
  * This ini is used to Trigger host crash when firmware fails to send the
  * response to host
  * fw_timeout_crash = 0 Disabled
  * fw_timeout_crash = 1 Trigger host crash
  *
  * Related: None
  *
  * Supported Feature: SSR
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_CRASH_FW_TIMEOUT CFG_INI_BOOL( \
 	"fw_timeout_crash", \
 	1, \
 	"Enable FW Timeout Crash")

 /*
  * <ini>
  * gDroppedPktDisconnectTh - Sets dropped packet threshold in firmware
  * @Min: 0
  * @Max: 65535
  * @Default: 512
  *
  * This INI is the packet drop threshold will trigger disconnect from remote
  * peer.
  *
  * Related: None
  *
  * Supported Feature: connection
  *
  * Usage: External
  *
  * </ini>
  */
 #define CFG_DROPPED_PKT_DISCONNECT_THRESHOLD CFG_INI_UINT( \
 	"gDroppedPktDisconnectTh", \
 	0, \
 	65535, \
 	512, \
 	CFG_VALUE_OR_DEFAULT, \
 	"Dropped Pkt Disconnect threshold")

 /*
  * <ini>
  * gItoRepeatCount - sets ito repeated count
  * @Min: 0
  * @Max: 5
  * @Default: 0
  *
  * This ini sets the ito count in FW
  *
  * Usage: External
  *
  * </ini>
  */
 #define CFG_ITO_REPEAT_COUNT CFG_INI_UINT( \
 	"gItoRepeatCount", \
 	0, \
 	5, \
 	0, \
 	CFG_VALUE_OR_DEFAULT, \
 	"ITO Repeat Count")

 /*
  * <ini>
  * gEnableDebugLog - Enable/Disable the Connection related logs
  * @Min: 0
  * @Max: 0xFF
  * @Default: 0x0F
  *
  * This ini is used to enable/disable the connection related logs
  * 0x1 - Enable mgmt pkt logs (excpet probe req/rsp, beacons).
  * 0x2 - Enable EAPOL pkt logs.
  * 0x4 - Enable DHCP pkt logs.
  * 0x8 - Enable mgmt action frames logs.
  * 0x0 - Disable all the above connection related logs.
  * The default value of 0x0F will enable all the above logs
  *
  * Related: None
  *
  * Supported Feature: STA
  *
  * Usage: Internal/External
  *
  * </ini>
  */
 #define CFG_ENABLE_DEBUG_PACKET_LOG CFG_INI_UINT( \
 				"gEnableDebugLog", \
 				0, 0xFF, 0x0F, \
 				CFG_VALUE_OR_DEFAULT, \
 				"Enable debug log")

 #define CFG_GENERIC_ALL \
 	CFG(CFG_ENABLE_DEBUG_PACKET_LOG) \
 	CFG(CFG_PMF_SA_QUERY_MAX_RETRIES) \
 	CFG(CFG_PMF_SA_QUERY_RETRY_INTERVAL) \
 	CFG(CFG_RTT3_ENABLE) \
 	CFG(CFG_BAND_CAPABILITY) \
 	CFG(CFG_PREVENT_LINK_DOWN) \
 	CFG(CFG_SELECT_5GHZ_MARGIN) \
 	CFG(CFG_ENABLE_MEM_DEEP_SLEEP) \
 	CFG(CFG_ENABLE_CCK_TX_FIR_OVERRIDE) \
 	CFG(CFG_ENABLE_CRASH_INJECT) \
 	CFG(CFG_ENABLE_LPASS_SUPPORT) \
 	CFG(CFG_ENABLE_SELF_RECOVERY) \
 	CFG(CFG_SAP_DOT11MC) \
 	CFG(CFG_ENABLE_FATAL_EVENT_TRIGGER) \
 	CFG(CFG_SUB_20_CHANNEL_WIDTH) \
 	CFG(CFG_OPTIMIZE_CA_EVENT) \
 	CFG(CFG_CRASH_FW_TIMEOUT) \
 	CFG(CFG_DROPPED_PKT_DISCONNECT_THRESHOLD) \
 	CFG(CFG_ITO_REPEAT_COUNT)

 #endif /* __CFG_MLME_GENERIC_H */
	/*
	* Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
	*
	* Permission to use, copy, modify, and/or distribute this software for
	* any purpose with or without fee is hereby granted, provided that the
	* above copyright notice and this permission notice appear in all
	* copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
	* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
	* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
	* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
	* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
	* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
	* PERFORMANCE OF THIS SOFTWARE.
	*/

	/**
	* DOC: This file contains centralized definitions of converged configuration.
	*/

	#ifndef __CFG_MLME_GENERIC_H
	#define __CFG_MLME_GENERIC_H

	#ifdef WLAN_FEATURE_11W
	#define CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE CFG_INI_UINT
	#define CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE CFG_INI_UINT
	#else
	#define CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE CFG_UINT
	#define CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE CFG_UINT
	#endif /WLAN_FEATURE_11W/

	/*
	* pmfSaQueryMaxRetries - Control PMF SA query retries for SAP
	* @Min: 0
	* @Max: 20
	* @Default: 5
	*
	* This ini to set the number of PMF SA query retries for SAP
	*
	* Related: None.
	*
	* Supported Feature: PMF(11W)
	*
	*/
	#define CFG_PMF_SA_QUERY_MAX_RETRIES CFG_PMF_SA_QUERY_MAX_RETRIES_TYPE( \
	"pmfSaQueryMaxRetries", \
	0, \
	20, \
	5, \
	CFG_VALUE_OR_DEFAULT, \
	"PMF SA query retries for SAP")
	/*
	* pmfSaQueryRetryInterval - Control PMF SA query retry interval
	* for SAP in ms
	* @Min: 10
	* @Max: 2000
	* @Default: 200
	*
	* This ini to set the PMF SA query retry interval for SAP in ms
	*
	* Related: None.
	*
	* Supported Feature: PMF(11W)
	*
	*/
	#define CFG_PMF_SA_QUERY_RETRY_INTERVAL CFG_PMF_SA_QUERY_RETRY_INTERVAL_TYPE( \
	"pmfSaQueryRetryInterval", \
	10, \
	2000, \
	200, \
	CFG_VALUE_OR_DEFAULT, \
	"PMF SA query retry interval for SAP")

	#define CFG_RTT3_ENABLE CFG_BOOL( \
	"rtt3_enabled", \
	1, \
	"RTT3 enable/disable info")

	/*
	* <ini>
	* BandCapability - Preferred band (0: Both, 1: 2.4G only, 2: 5G only)
	* @Min: 0
	* @Max: 2
	* @Default: 0
	*
	* This ini is used to set default band capability
	* (0: Both, 1: 2.4G only, 2: 5G only)
	*
	* Related: None
	*
	* Supported Feature: STA
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_BAND_CAPABILITY CFG_INI_UINT( \
	"BandCapability", \
	0, \
	2, \
	0, \
	CFG_VALUE_OR_DEFAULT, \
	"Band Capability")

	/*
	* <ini>
	* gPreventLinkDown - Enable to prevent bus link from going down
	* @Min: 0
	* @Max: 1
	* @Default: 0
	*
	* Enable to prevent bus link from going down. Useful for platforms that do not
	* (yet) support link down suspend cases.
	*
	* Related: N/A
	*
	* Supported Feature: Suspend/Resume
	*
	* Usage: Internal
	*
	* </ini>
	*/
	#if defined(QCA_WIFI_NAPIER_EMULATION) \|\| defined(QCA_WIFI_QCA6290)
	#define CFG_PREVENT_LINK_DOWN CFG_INI_BOOL( \
	"gPreventLinkDown", \
	1, \
	"Prevent Bus Link Down")
	#else
	#define CFG_PREVENT_LINK_DOWN CFG_INI_BOOL( \
	"gPreventLinkDown", \
	0, \
	"Prevent Bus Link Down")
	#endif /* QCA_WIFI_NAPIER_EMULATION */

	/*
	* <ini>
	* gSelect5GHzMargin - Sets RSSI preference for 5GHz over 2.4GHz AP.
	* @Min: 0
	* @Max: 60
	* @Default: 0
	*
	* Prefer connecting to 5G AP even if its RSSI is lower by gSelect5GHzMargin
	* dBm than 2.4G AP. This feature requires the dependent cfg.ini
	* "gRoamPrefer5GHz" set to 1
	*
	* Related: gRoamPrefer5GHz
	*
	* Supported Feature: Roaming
	*
	* Usage: External
	*
	* </ini>
	*/
	#define CFG_SELECT_5GHZ_MARGIN CFG_INI_UINT( \
	"gSelect5GHzMargin", \
	0, \
	60, \
	0, \
	CFG_VALUE_OR_DEFAULT, \
	"Select 5Ghz Margin")

	/*
	* <ini>
	* gEnableMemDeepSleep - Sets Memory Deep Sleep on/off.
	* @Min: 0
	* @Max: 1
	* @Default: 1
	*
	*
	* Related: None
	*
	* Supported Feature: General
	*
	* Usage: External
	*
	* </ini>
	*/
	#define CFG_ENABLE_MEM_DEEP_SLEEP CFG_INI_BOOL( \
	"gEnableMemDeepSleep", \
	1, \
	"Enable Memory Deep Sleep")

	/*
	* <ini>
	*
	* gEnableCckTxFirOverride - Enable/disable CCK TxFIR Override
	* @Min: 0 (disabled)
	* @Max: 1 (enabled)
	* @Default: 0 (disabled)
	*
	* When operating in an 802.11b mode, this configuration item forces a 2x2 radio
	* configuration into 1x for Tx and 2x for Rx (ie 1x2) for regulatory compliance
	* reasons.
	*
	* Related: enable2x2
	*
	* Supported Feature: 802.11b, 2x2
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_ENABLE_CCK_TX_FIR_OVERRIDE CFG_INI_BOOL( \
	"gEnableCckTxFirOverride", \
	0, \
	"Enable CCK TX FIR Override")

	/*
	* <ini>
	*
	* gEnableForceTargetAssert - Enable/disable SSR
	* @Min: 0 (disabled)
	* @Max: 1 (enabled)
	* @Default: 0 (disabled)
	*
	* This INI item is used to control subsystem restart(SSR) test framework
	* Set it's value to 1 to enable APPS trigerred SSR testing
	*
	* Related: None
	*
	* Supported Feature: General
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_ENABLE_CRASH_INJECT CFG_INI_BOOL( \
	"gEnableForceTargetAssert", \
	0, \
	"Enable Crash Inject")

	/*
	* <ini>
	*
	* gEnableLpassSupport - Enable/disable LPASS Support
	* @Min: 0 (disabled)
	* @Max: 1 (enabled)
	* @Default: 0 (disabled)
	*
	* Related: None
	*
	* Supported Feature: General
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#ifdef WLAN_FEATURE_LPSS
	#define CFG_ENABLE_LPASS_SUPPORT CFG_INI_BOOL( \
	"gEnableLpassSupport", \
	0, \
	"Enable LPASS Support")
	#else
	#define CFG_ENABLE_LPASS_SUPPORT CFG_BOOL( \
	"gEnableLpassSupport", \
	0, \
	"Enable LPASS Support")
	#endif

	/*
	* <ini>
	*
	* gEnableSelfRecovery - Enable/disable Self Recovery
	* @Min: 0 (disabled)
	* @Max: 1 (enabled)
	* @Default: 0 (disabled)
	*
	* Related: None
	*
	* Supported Feature: General
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_ENABLE_SELF_RECOVERY CFG_INI_BOOL( \
	"gEnableSelfRecovery", \
	0, \
	"Enable Self Recovery")

	/*
	* <ini>
	*
	* gSapDot11mc - Enable/disable SAP 802.11mc support
	* @Min: 0 (disabled)
	* @Max: 1 (enabled)
	* @Default: 0 (disabled)
	*
	* Related: None
	*
	* Supported Feature: General
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_SAP_DOT11MC CFG_INI_BOOL( \
	"gSapDot11mc", \
	0, \
	"SAP 802.11mc support")

	/*
	* <ini>
	*
	* gEnableFatalEvent - Enable/Disable BUG report in case of fatal event
	* @Min: 0 (disabled)
	* @Max: 1 (enabled)
	* @Default: 1 (enabled)
	*
	* Related: None
	*
	* Supported Feature: General
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_ENABLE_FATAL_EVENT_TRIGGER CFG_INI_BOOL( \
	"gEnableFatalEvent", \
	1, \
	"Enable Fatal Event Trigger")

	/*
	* <ini>
	* gSub20ChannelWidth - Control sub 20 channel width (5/10 Mhz)
	* @Min: 0
	* @Max: 2
	* @Default: 0
	*
	* This ini is used to set the sub 20 channel width.
	* gSub20ChannelWidth=0: indicates do not use Sub 20 MHz bandwidth
	* gSub20ChannelWidth=1: Bring up SAP/STA in 5 MHz bandwidth
	* gSub20ChannelWidth=2: Bring up SAP/STA in 10 MHz bandwidth
	*
	* Related: None
	*
	* Supported Feature: 5/10 Mhz channel width support
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_SUB_20_CHANNEL_WIDTH CFG_INI_UINT( \
	"gSub20ChannelWidth", \
	0, \
	2, \
	0, \
	CFG_VALUE_OR_DEFAULT, \
	"Sub 20 Channel Width")

	/*
	* <ini>
	* goptimize_chan_avoid_event - Optimize channel avoidance indication
	* coming from firmware
	* @Min: 0
	* @Max: 1
	* @Default: 0
	*
	* Related: None
	*
	* Supported Feature: General
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_OPTIMIZE_CA_EVENT CFG_INI_BOOL( \
	"goptimize_chan_avoid_event", \
	0, \
	"Optimize FW CA Event")

	/*
	* <ini>
	* fw_timeout_crash - Enable/Disable BUG ON
	* @Min: 0
	* @Max: 1
	* @Default: 1
	*
	* This ini is used to Trigger host crash when firmware fails to send the
	* response to host
	* fw_timeout_crash = 0 Disabled
	* fw_timeout_crash = 1 Trigger host crash
	*
	* Related: None
	*
	* Supported Feature: SSR
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_CRASH_FW_TIMEOUT CFG_INI_BOOL( \
	"fw_timeout_crash", \
	1, \
	"Enable FW Timeout Crash")

	/*
	* <ini>
	* gDroppedPktDisconnectTh - Sets dropped packet threshold in firmware
	* @Min: 0
	* @Max: 65535
	* @Default: 512
	*
	* This INI is the packet drop threshold will trigger disconnect from remote
	* peer.
	*
	* Related: None
	*
	* Supported Feature: connection
	*
	* Usage: External
	*
	* </ini>
	*/
	#define CFG_DROPPED_PKT_DISCONNECT_THRESHOLD CFG_INI_UINT( \
	"gDroppedPktDisconnectTh", \
	0, \
	65535, \
	512, \
	CFG_VALUE_OR_DEFAULT, \
	"Dropped Pkt Disconnect threshold")

	/*
	* <ini>
	* gItoRepeatCount - sets ito repeated count
	* @Min: 0
	* @Max: 5
	* @Default: 0
	*
	* This ini sets the ito count in FW
	*
	* Usage: External
	*
	* </ini>
	*/
	#define CFG_ITO_REPEAT_COUNT CFG_INI_UINT( \
	"gItoRepeatCount", \
	0, \
	5, \
	0, \
	CFG_VALUE_OR_DEFAULT, \
	"ITO Repeat Count")

	/*
	* <ini>
	* gEnableDebugLog - Enable/Disable the Connection related logs
	* @Min: 0
	* @Max: 0xFF
	* @Default: 0x0F
	*
	* This ini is used to enable/disable the connection related logs
	* 0x1 - Enable mgmt pkt logs (excpet probe req/rsp, beacons).
	* 0x2 - Enable EAPOL pkt logs.
	* 0x4 - Enable DHCP pkt logs.
	* 0x8 - Enable mgmt action frames logs.
	* 0x0 - Disable all the above connection related logs.
	* The default value of 0x0F will enable all the above logs
	*
	* Related: None
	*
	* Supported Feature: STA
	*
	* Usage: Internal/External
	*
	* </ini>
	*/
	#define CFG_ENABLE_DEBUG_PACKET_LOG CFG_INI_UINT( \
	"gEnableDebugLog", \
	0, 0xFF, 0x0F, \
	CFG_VALUE_OR_DEFAULT, \
	"Enable debug log")

	#define CFG_GENERIC_ALL \
	CFG(CFG_ENABLE_DEBUG_PACKET_LOG) \
	CFG(CFG_PMF_SA_QUERY_MAX_RETRIES) \
	CFG(CFG_PMF_SA_QUERY_RETRY_INTERVAL) \
	CFG(CFG_RTT3_ENABLE) \
	CFG(CFG_BAND_CAPABILITY) \
	CFG(CFG_PREVENT_LINK_DOWN) \
	CFG(CFG_SELECT_5GHZ_MARGIN) \
	CFG(CFG_ENABLE_MEM_DEEP_SLEEP) \
	CFG(CFG_ENABLE_CCK_TX_FIR_OVERRIDE) \
	CFG(CFG_ENABLE_CRASH_INJECT) \
	CFG(CFG_ENABLE_LPASS_SUPPORT) \
	CFG(CFG_ENABLE_SELF_RECOVERY) \
	CFG(CFG_SAP_DOT11MC) \
	CFG(CFG_ENABLE_FATAL_EVENT_TRIGGER) \
	CFG(CFG_SUB_20_CHANNEL_WIDTH) \
	CFG(CFG_OPTIMIZE_CA_EVENT) \
	CFG(CFG_CRASH_FW_TIMEOUT) \
	CFG(CFG_DROPPED_PKT_DISCONNECT_THRESHOLD) \
	CFG(CFG_ITO_REPEAT_COUNT)

	#endif /* __CFG_MLME_GENERIC_H */