| /* |
| * Copyright (c) 2012-2019 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #ifndef __CFG_LEGACY_DP |
| #define __CFG_LEGACY_DP |
| |
| #include "cfg_define.h" |
| #include "cfg_converged.h" |
| #include "qdf_types.h" |
| |
| /* |
| * <ini> |
| * gEnableFlowSteering - Enable rx traffic flow steering |
| * @Default: false |
| * |
| * Enable Rx traffic flow steering to enable Rx interrupts on multiple CEs based |
| * on the flows. Different CEs<==>different IRQs<==>probably different CPUs. |
| * Parallel Rx paths. |
| * 1 - enable 0 - disable |
| * |
| * Usage: Internal |
| * |
| * </ini> |
| */ |
| #define CFG_DP_FLOW_STEERING_ENABLED \ |
| CFG_INI_BOOL( \ |
| "gEnableFlowSteering", \ |
| false, \ |
| "") |
| |
| /* |
| * <ini> |
| * maxMSDUsPerRxInd - Max number of MSDUs per HTT RX IN ORDER INDICATION msg. |
| * Note that this has a direct impact on the size of source CE rings. |
| * It is possible to go below 8, but would require testing; so we are |
| * restricting the lower limit to 8 artificially |
| * |
| * It is recommended that this value is a POWER OF 2. |
| * |
| * Values lower than 8 are for experimental purposes only |
| * |
| * </ini>. |
| */ |
| #define CFG_DP_MAX_MSDUS_PER_RXIND \ |
| CFG_INI_UINT("maxMSDUsPerRxInd", \ |
| 4, 32, 32, CFG_VALUE_OR_DEFAULT, \ |
| "Max number of MSDUs per HTT RX INORDER IND msg") |
| |
| /* |
| * <ini> |
| * gEnableTxSchedWrrVO - Set TX sched parameters for VO |
| * @Default: |
| * |
| * This key is mapping to VO defined in data path module through |
| * OL_TX_SCHED_WRR_ADV_CAT_CFG_SPEC. The user can tune the |
| * WRR TX sched parameters such as skip, credit, limit, credit, disc for VO. |
| * e.g., gEnableTxSchedWrrVO = 10, 9, 8, 1, 8 |
| * |
| * </ini> |
| */ |
| #define CFG_DP_ENABLE_TX_SCHED_WRR_VO \ |
| CFG_INI_STRING("gEnableTxSchedWrrVO", \ |
| 0, 50, "", "et TX sched parameters for VO") |
| |
| /* |
| * <ini> |
| * gEnableTxSchedWrrVI - Set TX sched parameters for VI |
| * @Default: |
| * |
| * This key is mapping to VI defined in data path module through |
| * OL_TX_SCHED_WRR_ADV_CAT_CFG_SPEC. The user can tune the |
| * WRR TX sched parameters such as skip, credit, limit, credit, disc for VI. |
| * e.g., gEnableTxSchedWrrVI = 10, 9, 8, 1, 8 |
| * |
| * </ini> |
| */ |
| #define CFG_DP_ENABLE_TX_SCHED_WRR_VI \ |
| CFG_INI_STRING("gEnableTxSchedWrrVI", \ |
| 0, 50, "", "Set TX sched parameters for VI") |
| |
| /* |
| * <ini> |
| * gEnableTxSchedWrrBE - Set TX sched parameters for BE |
| * @Default: |
| * |
| * This key is mapping to BE defined in data path module through |
| * OL_TX_SCHED_WRR_ADV_CAT_CFG_SPEC. The user can tune the |
| * WRR TX sched parameters such as skip, credit, limit, credit, disc for BE. |
| * e.g., gEnableTxSchedWrrBE = 10, 9, 8, 1, 8 |
| * |
| * </ini> |
| */ |
| #define CFG_DP_ENABLE_TX_SCHED_WRR_BE \ |
| CFG_INI_STRING("gEnableTxSchedWrrBE", \ |
| 0, 50, "", "Set TX sched parameters for BE") |
| |
| /* |
| * <ini> |
| * gEnableTxSchedWrrBK - Set TX sched parameters for BK |
| * @Default: |
| * |
| * This key is mapping to BK defined in data path module through |
| * OL_TX_SCHED_WRR_ADV_CAT_CFG_SPEC. The user can tune the |
| * WRR TX sched parameters such as skip, credit, limit, credit, disc for BK. |
| * e.g., gEnableTxSchedWrrBK = 10, 9, 8, 1, 8 |
| * |
| * </ini> |
| */ |
| #define CFG_DP_ENABLE_TX_SCHED_WRR_BK \ |
| CFG_INI_STRING("gEnableTxSchedWrrBK", \ |
| 0, 50, "", "Set TX sched parameters for BK") |
| |
| #define CFG_DP_CE_CLASSIFY_ENABLE \ |
| CFG_INI_BOOL("gCEClassifyEnable", \ |
| true, "enable CE classify") |
| |
| /* |
| * <ini> |
| * gEnablePeerUnmapConfSupport - Set PEER UNMAP confirmation support |
| * Default: false |
| * 1 - enable 0 - disable |
| * |
| * Enable peer unmap confirmation support in the Host. Host will send |
| * this support to the FW only if FW support is enabled. |
| * |
| * </ini> |
| */ |
| #define CFG_DP_ENABLE_PEER_UMAP_CONF_SUPPORT \ |
| CFG_INI_BOOL("gEnablePeerUnmapConfSupport", \ |
| false, "enable PEER UNMAP CONF support") |
| |
| #define CFG_LEGACY_DP_ALL \ |
| CFG(CFG_DP_FLOW_STEERING_ENABLED) \ |
| CFG(CFG_DP_CE_CLASSIFY_ENABLE) \ |
| CFG(CFG_DP_MAX_MSDUS_PER_RXIND) \ |
| CFG(CFG_DP_ENABLE_TX_SCHED_WRR_VO) \ |
| CFG(CFG_DP_ENABLE_TX_SCHED_WRR_VI) \ |
| CFG(CFG_DP_ENABLE_TX_SCHED_WRR_BE) \ |
| CFG(CFG_DP_ENABLE_TX_SCHED_WRR_BK) \ |
| CFG(CFG_DP_ENABLE_PEER_UMAP_CONF_SUPPORT) |
| |
| #endif |