| /* |
| * Copyright (c) 2012-2017 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| /** |
| * DOC: wlan_hdd_main.c |
| * |
| * WLAN Host Device Driver implementation |
| * |
| */ |
| |
| /* Include Files */ |
| #include <wlan_hdd_includes.h> |
| #include <cds_api.h> |
| #include <cds_sched.h> |
| #include <linux/cpu.h> |
| #include <linux/etherdevice.h> |
| #include <linux/firmware.h> |
| #include <wlan_hdd_tx_rx.h> |
| #include <wni_api.h> |
| #include <wlan_hdd_cfg.h> |
| #include <wlan_ptt_sock_svc.h> |
| #include <dbglog_host.h> |
| #include <wlan_logging_sock_svc.h> |
| #include <wlan_hdd_wowl.h> |
| #include <wlan_hdd_misc.h> |
| #include <wlan_hdd_wext.h> |
| #include "wlan_hdd_trace.h" |
| #include "wlan_hdd_ioctl.h" |
| #include "wlan_hdd_ftm.h" |
| #include "wlan_hdd_power.h" |
| #include "wlan_hdd_stats.h" |
| #include "wlan_hdd_scan.h" |
| #include "wlan_hdd_request_manager.h" |
| #include "qdf_types.h" |
| #include "qdf_trace.h" |
| #include <cdp_txrx_peer_ops.h> |
| #include <cdp_txrx_misc.h> |
| |
| #include <net/addrconf.h> |
| #include <linux/wireless.h> |
| #include <net/cfg80211.h> |
| #include <linux/inetdevice.h> |
| #include <net/addrconf.h> |
| #include "wlan_hdd_cfg80211.h" |
| #include "wlan_hdd_ext_scan.h" |
| #include "wlan_hdd_p2p.h" |
| #include <linux/rtnetlink.h> |
| #include "sap_api.h" |
| #include <linux/semaphore.h> |
| #include <linux/ctype.h> |
| #include <linux/compat.h> |
| #ifdef MSM_PLATFORM |
| #include <soc/qcom/subsystem_restart.h> |
| #endif |
| #include <wlan_hdd_hostapd.h> |
| #include <wlan_hdd_softap_tx_rx.h> |
| #include "cfg_api.h" |
| #include "qwlan_version.h" |
| #include "wma_types.h" |
| #include "wlan_hdd_tdls.h" |
| #ifdef FEATURE_WLAN_CH_AVOID |
| #include "cds_regdomain.h" |
| #include "cdp_txrx_flow_ctrl_v2.h" |
| #endif /* FEATURE_WLAN_CH_AVOID */ |
| #include "pld_common.h" |
| #include "wlan_hdd_ocb.h" |
| #include "wlan_hdd_nan.h" |
| #include "wlan_hdd_debugfs.h" |
| #include "wlan_hdd_driver_ops.h" |
| #include "epping_main.h" |
| #include "wlan_hdd_memdump.h" |
| |
| #include <wlan_hdd_ipa.h> |
| #include "hif.h" |
| #include "wma.h" |
| #include "wlan_policy_mgr_api.h" |
| #include "wlan_hdd_tsf.h" |
| #include "wlan_hdd_green_ap.h" |
| #include "bmi.h" |
| #include <wlan_hdd_regulatory.h> |
| #include "wlan_hdd_lpass.h" |
| #include "nan_api.h" |
| #include <wlan_hdd_napi.h> |
| #include "wlan_hdd_disa.h" |
| #include <dispatcher_init_deinit.h> |
| #include "wlan_hdd_object_manager.h" |
| #include "cds_utils.h" |
| #include <cdp_txrx_handle.h> |
| #include <qca_vendor.h> |
| #include "wlan_pmo_ucfg_api.h" |
| #include "sir_api.h" |
| #include "os_if_wifi_pos.h" |
| #include "wifi_pos_api.h" |
| #include "wlan_hdd_oemdata.h" |
| #include "wlan_hdd_he.h" |
| #include "os_if_nan.h" |
| #include "nan_public_structs.h" |
| #include "wlan_reg_ucfg_api.h" |
| |
| #ifdef CNSS_GENL |
| #include <net/cnss_nl.h> |
| #endif |
| #include "wlan_reg_ucfg_api.h" |
| |
| #ifdef MODULE |
| #define WLAN_MODULE_NAME module_name(THIS_MODULE) |
| #else |
| #define WLAN_MODULE_NAME "wlan" |
| #endif |
| |
| #ifdef TIMER_MANAGER |
| #define TIMER_MANAGER_STR " +TIMER_MANAGER" |
| #else |
| #define TIMER_MANAGER_STR "" |
| #endif |
| |
| #ifdef MEMORY_DEBUG |
| #define MEMORY_DEBUG_STR " +MEMORY_DEBUG" |
| #else |
| #define MEMORY_DEBUG_STR "" |
| #endif |
| |
| int wlan_start_ret_val; |
| static DECLARE_COMPLETION(wlan_start_comp); |
| static unsigned int dev_num = 1; |
| static struct cdev wlan_hdd_state_cdev; |
| static struct class *class; |
| static dev_t device; |
| #ifndef MODULE |
| static struct gwlan_loader *wlan_loader; |
| static ssize_t wlan_boot_cb(struct kobject *kobj, |
| struct kobj_attribute *attr, |
| const char *buf, size_t count); |
| struct gwlan_loader { |
| bool loaded_state; |
| struct kobject *boot_wlan_obj; |
| struct attribute_group *attr_group; |
| }; |
| |
| static struct kobj_attribute wlan_boot_attribute = |
| __ATTR(boot_wlan, 0220, NULL, wlan_boot_cb); |
| |
| static struct attribute *attrs[] = { |
| &wlan_boot_attribute.attr, |
| NULL, |
| }; |
| |
| #define MODULE_INITIALIZED 1 |
| #endif |
| |
| /* the Android framework expects this param even though we don't use it */ |
| #define BUF_LEN 20 |
| static char fwpath_buffer[BUF_LEN]; |
| static struct kparam_string fwpath = { |
| .string = fwpath_buffer, |
| .maxlen = BUF_LEN, |
| }; |
| |
| static char *country_code; |
| static int enable_11d = -1; |
| static int enable_dfs_chan_scan = -1; |
| |
| /* |
| * spinlock for synchronizing asynchronous request/response |
| * (full description of use in wlan_hdd_main.h) |
| */ |
| DEFINE_SPINLOCK(hdd_context_lock); |
| |
| #define WLAN_NLINK_CESIUM 30 |
| |
| static qdf_wake_lock_t wlan_wake_lock; |
| |
| #define WOW_MAX_FILTER_LISTS 1 |
| #define WOW_MAX_FILTERS_PER_LIST 4 |
| #define WOW_MIN_PATTERN_SIZE 6 |
| #define WOW_MAX_PATTERN_SIZE 64 |
| |
| #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 11, 0)) |
| static const struct wiphy_wowlan_support wowlan_support_reg_init = { |
| .flags = WIPHY_WOWLAN_ANY | |
| WIPHY_WOWLAN_MAGIC_PKT | |
| WIPHY_WOWLAN_DISCONNECT | |
| WIPHY_WOWLAN_SUPPORTS_GTK_REKEY | |
| WIPHY_WOWLAN_GTK_REKEY_FAILURE | |
| WIPHY_WOWLAN_EAP_IDENTITY_REQ | |
| WIPHY_WOWLAN_4WAY_HANDSHAKE | |
| WIPHY_WOWLAN_RFKILL_RELEASE, |
| .n_patterns = WOW_MAX_FILTER_LISTS * WOW_MAX_FILTERS_PER_LIST, |
| .pattern_min_len = WOW_MIN_PATTERN_SIZE, |
| .pattern_max_len = WOW_MAX_PATTERN_SIZE, |
| }; |
| #endif |
| |
| /* internal function declaration */ |
| |
| struct sock *cesium_nl_srv_sock; |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| static void wlan_hdd_auto_shutdown_cb(void); |
| #endif |
| |
| void hdd_start_complete(int ret) |
| { |
| wlan_start_ret_val = ret; |
| |
| complete(&wlan_start_comp); |
| } |
| |
| /** |
| * hdd_set_rps_cpu_mask - set RPS CPU mask for interfaces |
| * @hdd_ctx: pointer to hdd_context_t |
| * |
| * Return: none |
| */ |
| static void hdd_set_rps_cpu_mask(hdd_context_t *hdd_ctx) |
| { |
| hdd_adapter_t *adapter; |
| hdd_adapter_list_node_t *adapter_node, *next; |
| QDF_STATUS status = QDF_STATUS_SUCCESS; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| while (NULL != adapter_node && QDF_STATUS_SUCCESS == status) { |
| adapter = adapter_node->pAdapter; |
| if (NULL != adapter) |
| hdd_send_rps_ind(adapter); |
| status = hdd_get_next_adapter(hdd_ctx, adapter_node, &next); |
| adapter_node = next; |
| } |
| } |
| |
| /** |
| * wlan_hdd_txrx_pause_cb() - pause callback from txrx layer |
| * @vdev_id: vdev_id |
| * @action: action type |
| * @reason: reason type |
| * |
| * Return: none |
| */ |
| void wlan_hdd_txrx_pause_cb(uint8_t vdev_id, |
| enum netif_action_type action, enum netif_reason_type reason) |
| { |
| hdd_context_t *hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| hdd_adapter_t *adapter; |
| |
| if (!hdd_ctx) { |
| hdd_err("hdd ctx is NULL"); |
| return; |
| } |
| adapter = hdd_get_adapter_by_vdev(hdd_ctx, vdev_id); |
| |
| wlan_hdd_netif_queue_control(adapter, action, reason); |
| } |
| |
| /* |
| * Store WLAN driver version and timestamp info in global variables such that |
| * crash debugger can extract them from driver debug symbol and crashdump for |
| * post processing |
| */ |
| uint8_t g_wlan_driver_version[] = QWLAN_VERSIONSTR; |
| uint8_t g_wlan_driver_timestamp[] = BUILD_TIMESTAMP; |
| |
| /** |
| * hdd_device_mode_to_string() - return string conversion of device mode |
| * @device_mode: device mode |
| * |
| * This utility function helps log string conversion of device mode. |
| * |
| * Return: string conversion of device mode, if match found; |
| * "Unknown" otherwise. |
| */ |
| const char *hdd_device_mode_to_string(uint8_t device_mode) |
| { |
| switch (device_mode) { |
| CASE_RETURN_STRING(QDF_STA_MODE); |
| CASE_RETURN_STRING(QDF_SAP_MODE); |
| CASE_RETURN_STRING(QDF_P2P_CLIENT_MODE); |
| CASE_RETURN_STRING(QDF_P2P_GO_MODE); |
| CASE_RETURN_STRING(QDF_FTM_MODE); |
| CASE_RETURN_STRING(QDF_IBSS_MODE); |
| CASE_RETURN_STRING(QDF_P2P_DEVICE_MODE); |
| CASE_RETURN_STRING(QDF_OCB_MODE); |
| CASE_RETURN_STRING(QDF_NDI_MODE); |
| default: |
| return "Unknown"; |
| } |
| } |
| |
| /** |
| * hdd_validate_channel_and_bandwidth() - Validate the channel-bandwidth combo |
| * @adapter: HDD adapter |
| * @chan_number: Channel number |
| * @chan_bw: Bandwidth |
| * |
| * Checks if the given bandwidth is valid for the given channel number. |
| * |
| * Return: 0 for success, non-zero for failure |
| */ |
| int hdd_validate_channel_and_bandwidth(hdd_adapter_t *adapter, |
| uint32_t chan_number, |
| enum phy_ch_width chan_bw) |
| { |
| uint8_t chan[WNI_CFG_VALID_CHANNEL_LIST_LEN]; |
| uint32_t len = WNI_CFG_VALID_CHANNEL_LIST_LEN, i; |
| bool found = false; |
| tHalHandle hal; |
| |
| hal = WLAN_HDD_GET_HAL_CTX(adapter); |
| if (!hal) { |
| hdd_err("Invalid HAL context"); |
| return -EINVAL; |
| } |
| |
| if (0 != sme_cfg_get_str(hal, WNI_CFG_VALID_CHANNEL_LIST, chan, &len)) { |
| hdd_err("No valid channel list"); |
| return -EOPNOTSUPP; |
| } |
| |
| for (i = 0; i < len; i++) { |
| if (chan[i] == chan_number) { |
| found = true; |
| break; |
| } |
| } |
| |
| if (found == false) { |
| hdd_err("Channel not in driver's valid channel list"); |
| return -EOPNOTSUPP; |
| } |
| |
| if ((!WLAN_REG_IS_24GHZ_CH(chan_number)) && |
| (!WLAN_REG_IS_5GHZ_CH(chan_number))) { |
| hdd_err("CH %d is not in 2.4GHz or 5GHz", chan_number); |
| return -EINVAL; |
| } |
| |
| if (WLAN_REG_IS_24GHZ_CH(chan_number)) { |
| if (chan_bw == CH_WIDTH_80MHZ) { |
| hdd_err("BW80 not possible in 2.4GHz band"); |
| return -EINVAL; |
| } |
| if ((chan_bw != CH_WIDTH_20MHZ) && (chan_number == 14) && |
| (chan_bw != CH_WIDTH_MAX)) { |
| hdd_err("Only BW20 possible on channel 14"); |
| return -EINVAL; |
| } |
| } |
| |
| if (WLAN_REG_IS_5GHZ_CH(chan_number)) { |
| if ((chan_bw != CH_WIDTH_20MHZ) && (chan_number == 165) && |
| (chan_bw != CH_WIDTH_MAX)) { |
| hdd_err("Only BW20 possible on channel 165"); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int __hdd_netdev_notifier_call(struct notifier_block *nb, |
| unsigned long state, void *data) |
| { |
| #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 11, 0)) |
| struct netdev_notifier_info *dev_notif_info = data; |
| struct net_device *dev = dev_notif_info->dev; |
| #else |
| struct net_device *dev = data; |
| #endif |
| hdd_adapter_t *adapter = WLAN_HDD_GET_PRIV_PTR(dev); |
| hdd_context_t *hdd_ctx; |
| |
| ENTER_DEV(dev); |
| |
| /* Make sure that this callback corresponds to our device. */ |
| if ((strncmp(dev->name, "wlan", 4)) && (strncmp(dev->name, "p2p", 3))) |
| return NOTIFY_DONE; |
| |
| if ((adapter->magic != WLAN_HDD_ADAPTER_MAGIC) || |
| (adapter->dev != dev)) { |
| hdd_err("device adapter is not matching!!!"); |
| return NOTIFY_DONE; |
| } |
| |
| if (!dev->ieee80211_ptr) { |
| hdd_err("ieee80211_ptr is NULL!!!"); |
| return NOTIFY_DONE; |
| } |
| |
| hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| if (NULL == hdd_ctx) { |
| hdd_err("HDD Context Null Pointer"); |
| QDF_ASSERT(0); |
| return NOTIFY_DONE; |
| } |
| if (cds_is_driver_recovering()) |
| return NOTIFY_DONE; |
| |
| hdd_debug("%s New Net Device State = %lu", |
| dev->name, state); |
| |
| switch (state) { |
| case NETDEV_REGISTER: |
| break; |
| |
| case NETDEV_UNREGISTER: |
| break; |
| |
| case NETDEV_UP: |
| sme_ch_avoid_update_req(hdd_ctx->hHal); |
| break; |
| |
| case NETDEV_DOWN: |
| break; |
| |
| case NETDEV_CHANGE: |
| if (true == adapter->isLinkUpSvcNeeded) |
| complete(&adapter->linkup_event_var); |
| break; |
| |
| case NETDEV_GOING_DOWN: |
| if (adapter->scan_info.mScanPending != false) { |
| wlan_abort_scan(hdd_ctx->hdd_pdev, INVAL_PDEV_ID, |
| adapter->sessionId, INVALID_SCAN_ID, true); |
| } else { |
| cds_flush_work(&adapter->scan_block_work); |
| hdd_debug("Scan is not Pending from user"); |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| /** |
| * hdd_netdev_notifier_call() - netdev notifier callback function |
| * @nb: pointer to notifier block |
| * @state: state |
| * @ndev: ndev pointer |
| * |
| * Return: 0 on success, error number otherwise. |
| */ |
| static int hdd_netdev_notifier_call(struct notifier_block *nb, |
| unsigned long state, |
| void *ndev) |
| { |
| int ret; |
| |
| cds_ssr_protect(__func__); |
| ret = __hdd_netdev_notifier_call(nb, state, ndev); |
| cds_ssr_unprotect(__func__); |
| |
| return ret; |
| } |
| |
| struct notifier_block hdd_netdev_notifier = { |
| .notifier_call = hdd_netdev_notifier_call, |
| }; |
| |
| /* variable to hold the insmod parameters */ |
| static int con_mode; |
| |
| /* Variable to hold connection mode including module parameter con_mode */ |
| static int curr_con_mode; |
| |
| /** |
| * hdd_map_nl_chan_width() - Map NL channel width to internal representation |
| * @ch_width: NL channel width |
| * |
| * Converts the NL channel width to the driver's internal representation |
| * |
| * Return: Converted channel width. In case of non matching NL channel width, |
| * CH_WIDTH_MAX will be returned. |
| */ |
| enum phy_ch_width hdd_map_nl_chan_width(enum nl80211_chan_width ch_width) |
| { |
| uint8_t fw_ch_bw; |
| |
| fw_ch_bw = wma_get_vht_ch_width(); |
| switch (ch_width) { |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| case NL80211_CHAN_WIDTH_20: |
| return CH_WIDTH_20MHZ; |
| case NL80211_CHAN_WIDTH_40: |
| return CH_WIDTH_40MHZ; |
| case NL80211_CHAN_WIDTH_80: |
| return CH_WIDTH_80MHZ; |
| case NL80211_CHAN_WIDTH_80P80: |
| if (fw_ch_bw == WNI_CFG_VHT_CHANNEL_WIDTH_80_PLUS_80MHZ) |
| return CH_WIDTH_80P80MHZ; |
| else if (fw_ch_bw == WNI_CFG_VHT_CHANNEL_WIDTH_160MHZ) |
| return CH_WIDTH_160MHZ; |
| else |
| return CH_WIDTH_80MHZ; |
| case NL80211_CHAN_WIDTH_160: |
| if (fw_ch_bw >= WNI_CFG_VHT_CHANNEL_WIDTH_160MHZ) |
| return CH_WIDTH_160MHZ; |
| else |
| return CH_WIDTH_80MHZ; |
| case NL80211_CHAN_WIDTH_5: |
| return CH_WIDTH_5MHZ; |
| case NL80211_CHAN_WIDTH_10: |
| return CH_WIDTH_10MHZ; |
| default: |
| hdd_err("Invalid channel width %d, setting to default", |
| ch_width); |
| return CH_WIDTH_INVALID; |
| } |
| } |
| |
| /* wlan_hdd_find_opclass() - Find operating class for a channel |
| * @hal: handler to HAL |
| * @channel: channel id |
| * @bw_offset: bandwidth offset |
| * |
| * Function invokes sme api to find the operating class |
| * |
| * Return: operating class |
| */ |
| uint8_t wlan_hdd_find_opclass(tHalHandle hal, uint8_t channel, |
| uint8_t bw_offset) |
| { |
| uint8_t opclass = 0; |
| |
| sme_get_opclass(hal, channel, bw_offset, &opclass); |
| return opclass; |
| } |
| |
| /** |
| * hdd_qdf_trace_enable() - configure initial QDF Trace enable |
| * @module_id: Module whose trace level is being configured |
| * @bitmask: Bitmask of log levels to be enabled |
| * |
| * Called immediately after the cfg.ini is read in order to configure |
| * the desired trace levels. |
| * |
| * Return: None |
| */ |
| int hdd_qdf_trace_enable(QDF_MODULE_ID module_id, uint32_t bitmask) |
| { |
| QDF_TRACE_LEVEL level; |
| int qdf_print_idx = -1; |
| int status = -1; |
| /* |
| * if the bitmask is the default value, then a bitmask was not |
| * specified in cfg.ini, so leave the logging level alone (it |
| * will remain at the "compiled in" default value) |
| */ |
| if (CFG_QDF_TRACE_ENABLE_DEFAULT == bitmask) |
| return 0; |
| |
| qdf_print_idx = qdf_get_pidx(); |
| |
| /* a mask was specified. start by disabling all logging */ |
| status = qdf_print_set_category_verbose(qdf_print_idx, module_id, |
| QDF_TRACE_LEVEL_NONE, 0); |
| |
| if (QDF_STATUS_SUCCESS != status) |
| return -EINVAL; |
| /* now cycle through the bitmask until all "set" bits are serviced */ |
| level = QDF_TRACE_LEVEL_FATAL; |
| while (0 != bitmask) { |
| if (bitmask & 1) { |
| status = qdf_print_set_category_verbose(qdf_print_idx, |
| module_id, level, 1); |
| if (QDF_STATUS_SUCCESS != status) |
| return -EINVAL; |
| } |
| |
| level++; |
| bitmask >>= 1; |
| } |
| return 0; |
| } |
| |
| /** |
| * wlan_hdd_validate_context() - check the HDD context |
| * @hdd_ctx: HDD context pointer |
| * |
| * Return: 0 if the context is valid. Error code otherwise |
| */ |
| int wlan_hdd_validate_context(hdd_context_t *hdd_ctx) |
| { |
| if (NULL == hdd_ctx || NULL == hdd_ctx->config) { |
| hdd_err("%pS HDD context is Null", (void *)_RET_IP_); |
| return -ENODEV; |
| } |
| |
| if (cds_is_driver_recovering()) { |
| hdd_debug("%pS Recovery in Progress. State: 0x%x Ignore!!!", |
| (void *)_RET_IP_, cds_get_driver_state()); |
| return -EAGAIN; |
| } |
| |
| if (cds_is_load_or_unload_in_progress()) { |
| return -EAGAIN; |
| } |
| |
| if (hdd_ctx->start_modules_in_progress || |
| hdd_ctx->stop_modules_in_progress) { |
| hdd_debug("%pS Start/Stop Modules in progress. Ignore!!!", |
| (void *)_RET_IP_); |
| return -EAGAIN; |
| } |
| |
| return 0; |
| } |
| |
| int hdd_validate_adapter(hdd_adapter_t *adapter) |
| { |
| if (!adapter) { |
| hdd_err("adapter is null"); |
| return -EINVAL; |
| } |
| |
| if (adapter->magic != WLAN_HDD_ADAPTER_MAGIC) { |
| hdd_err("bad adapter magic: 0x%x (should be 0x%x)", |
| adapter->magic, WLAN_HDD_ADAPTER_MAGIC); |
| return -EINVAL; |
| } |
| |
| if (!adapter->dev) { |
| hdd_err("adapter net_device is null"); |
| return -EINVAL; |
| } |
| |
| if (!(adapter->dev->flags & IFF_UP)) { |
| hdd_info("adapter net_device is not up"); |
| return -EAGAIN; |
| } |
| |
| if (adapter->sessionId == HDD_SESSION_ID_INVALID) { |
| hdd_info("adapter session is not open"); |
| return -EAGAIN; |
| } |
| |
| if (adapter->sessionId >= MAX_NUMBER_OF_ADAPTERS) { |
| hdd_err("bad adapter session Id: %u", adapter->sessionId); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * wlan_hdd_validate_modules_state() - Check modules status |
| * @hdd_ctx: HDD context pointer |
| * |
| * Check's the driver module's state and returns true if the |
| * modules are enabled returns false if modules are closed. |
| * |
| * Return: True if modules are enabled or false. |
| */ |
| bool wlan_hdd_validate_modules_state(hdd_context_t *hdd_ctx) |
| { |
| mutex_lock(&hdd_ctx->iface_change_lock); |
| if (hdd_ctx->driver_status != DRIVER_MODULES_ENABLED) { |
| mutex_unlock(&hdd_ctx->iface_change_lock); |
| hdd_notice("Modules not enabled, Present status: %d", |
| hdd_ctx->driver_status); |
| return false; |
| } |
| mutex_unlock(&hdd_ctx->iface_change_lock); |
| return true; |
| } |
| |
| /** |
| * hdd_set_ibss_power_save_params() - update IBSS Power Save params to WMA. |
| * @hdd_adapter_t Hdd adapter. |
| * |
| * This function sets the IBSS power save config parameters to WMA |
| * which will send it to firmware if FW supports IBSS power save |
| * before vdev start. |
| * |
| * Return: QDF_STATUS QDF_STATUS_SUCCESS on Success and QDF_STATUS_E_FAILURE |
| * on failure. |
| */ |
| QDF_STATUS hdd_set_ibss_power_save_params(hdd_adapter_t *adapter) |
| { |
| int ret; |
| hdd_context_t *hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| |
| if (hdd_ctx == NULL) { |
| hdd_err("HDD context is null"); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_IBSS_SET_ATIM_WINDOW_SIZE, |
| hdd_ctx->config->ibssATIMWinSize, |
| VDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMA_VDEV_IBSS_SET_ATIM_WINDOW_SIZE failed %d", ret); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_IBSS_SET_POWER_SAVE_ALLOWED, |
| hdd_ctx->config->isIbssPowerSaveAllowed, |
| VDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMA_VDEV_IBSS_SET_POWER_SAVE_ALLOWED failed %d", |
| ret); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_IBSS_SET_POWER_COLLAPSE_ALLOWED, |
| hdd_ctx->config-> |
| isIbssPowerCollapseAllowed, VDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMA_VDEV_IBSS_SET_POWER_COLLAPSE_ALLOWED failed %d", |
| ret); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_IBSS_SET_AWAKE_ON_TX_RX, |
| hdd_ctx->config->isIbssAwakeOnTxRx, |
| VDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMA_VDEV_IBSS_SET_AWAKE_ON_TX_RX failed %d", ret); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_IBSS_SET_INACTIVITY_TIME, |
| hdd_ctx->config->ibssInactivityCount, |
| VDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMA_VDEV_IBSS_SET_INACTIVITY_TIME failed %d", ret); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_IBSS_SET_TXSP_END_INACTIVITY_TIME, |
| hdd_ctx->config->ibssTxSpEndInactivityTime, |
| VDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMA_VDEV_IBSS_SET_TXSP_END_INACTIVITY_TIME failed %d", |
| ret); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_IBSS_PS_SET_WARMUP_TIME_SECS, |
| hdd_ctx->config->ibssPsWarmupTime, |
| VDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMA_VDEV_IBSS_PS_SET_WARMUP_TIME_SECS failed %d", |
| ret); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_IBSS_PS_SET_1RX_CHAIN_IN_ATIM_WINDOW, |
| hdd_ctx->config->ibssPs1RxChainInAtimEnable, |
| VDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMA_VDEV_IBSS_PS_SET_1RX_CHAIN_IN_ATIM_WINDOW failed %d", |
| ret); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| #define INTF_MACADDR_MASK 0x7 |
| |
| /** |
| * hdd_update_macaddr() - update mac address |
| * @config: hdd configuration |
| * @hw_macaddr: mac address |
| * |
| * Mac address for multiple virtual interface is found as following |
| * i) The mac address of the first interface is just the actual hw mac address. |
| * ii) MSM 3 or 4 bits of byte5 of the actual mac address are used to |
| * define the mac address for the remaining interfaces and locally |
| * admistered bit is set. INTF_MACADDR_MASK is based on the number of |
| * supported virtual interfaces, right now this is 0x07 (meaning 8 |
| * interface). |
| * Byte[3] of second interface will be hw_macaddr[3](bit5..7) + 1, |
| * for third interface it will be hw_macaddr[3](bit5..7) + 2, etc. |
| * |
| * Return: None |
| */ |
| void hdd_update_macaddr(struct hdd_config *config, |
| struct qdf_mac_addr hw_macaddr) |
| { |
| int8_t i; |
| uint8_t macaddr_b3, tmp_br3; |
| |
| qdf_mem_copy(config->intfMacAddr[0].bytes, hw_macaddr.bytes, |
| QDF_MAC_ADDR_SIZE); |
| for (i = 1; i < QDF_MAX_CONCURRENCY_PERSONA; i++) { |
| qdf_mem_copy(config->intfMacAddr[i].bytes, hw_macaddr.bytes, |
| QDF_MAC_ADDR_SIZE); |
| macaddr_b3 = config->intfMacAddr[i].bytes[3]; |
| tmp_br3 = ((macaddr_b3 >> 4 & INTF_MACADDR_MASK) + i) & |
| INTF_MACADDR_MASK; |
| macaddr_b3 += tmp_br3; |
| |
| /* XOR-ing bit-24 of the mac address. This will give enough |
| * mac address range before collision |
| */ |
| macaddr_b3 ^= (1 << 7); |
| |
| /* Set locally administered bit */ |
| config->intfMacAddr[i].bytes[0] |= 0x02; |
| config->intfMacAddr[i].bytes[3] = macaddr_b3; |
| hdd_debug("config->intfMacAddr[%d]: " |
| MAC_ADDRESS_STR, i, |
| MAC_ADDR_ARRAY(config->intfMacAddr[i].bytes)); |
| } |
| } |
| |
| static void hdd_update_tgt_services(hdd_context_t *hdd_ctx, |
| struct wma_tgt_services *cfg) |
| { |
| struct hdd_config *config = hdd_ctx->config; |
| |
| /* Set up UAPSD */ |
| config->apUapsdEnabled &= cfg->uapsd; |
| |
| /* 11AX mode support */ |
| if ((config->dot11Mode == eHDD_DOT11_MODE_11ax || |
| config->dot11Mode == eHDD_DOT11_MODE_11ax_ONLY) && !cfg->en_11ax) |
| config->dot11Mode = eHDD_DOT11_MODE_11ac; |
| |
| /* 11AC mode support */ |
| if ((config->dot11Mode == eHDD_DOT11_MODE_11ac || |
| config->dot11Mode == eHDD_DOT11_MODE_11ac_ONLY) && !cfg->en_11ac) |
| config->dot11Mode = eHDD_DOT11_MODE_AUTO; |
| |
| /* ARP offload: override user setting if invalid */ |
| config->fhostArpOffload &= cfg->arp_offload; |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| /* PNO offload */ |
| hdd_debug("PNO Capability in f/w = %d", cfg->pno_offload); |
| if (cfg->pno_offload) |
| config->PnoOffload = true; |
| #endif |
| #ifdef FEATURE_WLAN_TDLS |
| config->fEnableTDLSSupport &= cfg->en_tdls; |
| config->fEnableTDLSOffChannel = config->fEnableTDLSOffChannel && |
| cfg->en_tdls_offchan; |
| config->fEnableTDLSBufferSta = config->fEnableTDLSBufferSta && |
| cfg->en_tdls_uapsd_buf_sta; |
| if (config->fTDLSUapsdMask && cfg->en_tdls_uapsd_sleep_sta) |
| config->fEnableTDLSSleepSta = true; |
| else |
| config->fEnableTDLSSleepSta = false; |
| #endif |
| #ifdef WLAN_FEATURE_ROAM_OFFLOAD |
| config->isRoamOffloadEnabled &= cfg->en_roam_offload; |
| #endif |
| sme_update_tgt_services(hdd_ctx->hHal, cfg); |
| |
| } |
| |
| /** |
| * hdd_update_vdev_nss() - sets the vdev nss |
| * @hdd_ctx: HDD context |
| * |
| * Sets the Nss per vdev type based on INI |
| * |
| * Return: None |
| */ |
| static void hdd_update_vdev_nss(hdd_context_t *hdd_ctx) |
| { |
| struct hdd_config *cfg_ini = hdd_ctx->config; |
| uint8_t max_supp_nss = 1; |
| |
| if (cfg_ini->enable2x2 && !cds_is_sub_20_mhz_enabled()) |
| max_supp_nss = 2; |
| |
| sme_update_vdev_type_nss(hdd_ctx->hHal, max_supp_nss, |
| cfg_ini->vdev_type_nss_2g, eCSR_BAND_24); |
| |
| sme_update_vdev_type_nss(hdd_ctx->hHal, max_supp_nss, |
| cfg_ini->vdev_type_nss_5g, eCSR_BAND_5G); |
| } |
| |
| /** |
| * hdd_update_hw_dbs_capable() - sets the dbs capability of the device |
| * @hdd_ctx: HDD context |
| * |
| * Sets the DBS capability as per INI and firmware capability |
| * |
| * Return: None |
| */ |
| static void hdd_update_hw_dbs_capable(hdd_context_t *hdd_ctx) |
| { |
| struct hdd_config *cfg_ini = hdd_ctx->config; |
| uint8_t hw_dbs_capable = 0; |
| |
| if ((!cfg_ini->dual_mac_feature_disable) |
| && policy_mgr_is_hw_dbs_capable(hdd_ctx->hdd_psoc)) |
| hw_dbs_capable = 1; |
| |
| sme_update_hw_dbs_capable(hdd_ctx->hHal, hw_dbs_capable); |
| } |
| |
| static void hdd_update_tgt_ht_cap(hdd_context_t *hdd_ctx, |
| struct wma_tgt_ht_cap *cfg) |
| { |
| QDF_STATUS status; |
| uint32_t value, val32; |
| uint16_t val16; |
| struct hdd_config *pconfig = hdd_ctx->config; |
| tSirMacHTCapabilityInfo *phtCapInfo; |
| uint8_t mcs_set[SIZE_OF_SUPPORTED_MCS_SET]; |
| uint8_t enable_tx_stbc; |
| |
| /* check and update RX STBC */ |
| if (pconfig->enableRxSTBC && !cfg->ht_rx_stbc) |
| pconfig->enableRxSTBC = cfg->ht_rx_stbc; |
| |
| /* get the MPDU density */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_MPDU_DENSITY, &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get MPDU DENSITY"); |
| value = 0; |
| } |
| |
| /* |
| * MPDU density: |
| * override user's setting if value is larger |
| * than the one supported by target |
| */ |
| if (value > cfg->mpdu_density) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, WNI_CFG_MPDU_DENSITY, |
| cfg->mpdu_density); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set MPDU DENSITY to CCM"); |
| } |
| |
| /* get the HT capability info */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_HT_CAP_INFO, &val32); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_err("could not get HT capability info"); |
| return; |
| } |
| val16 = (uint16_t) val32; |
| phtCapInfo = (tSirMacHTCapabilityInfo *) &val16; |
| |
| /* Set the LDPC capability */ |
| phtCapInfo->advCodingCap = cfg->ht_rx_ldpc; |
| |
| if (pconfig->ShortGI20MhzEnable && !cfg->ht_sgi_20) |
| pconfig->ShortGI20MhzEnable = cfg->ht_sgi_20; |
| |
| if (pconfig->ShortGI40MhzEnable && !cfg->ht_sgi_40) |
| pconfig->ShortGI40MhzEnable = cfg->ht_sgi_40; |
| |
| hdd_ctx->num_rf_chains = cfg->num_rf_chains; |
| hdd_ctx->ht_tx_stbc_supported = cfg->ht_tx_stbc; |
| |
| enable_tx_stbc = pconfig->enableTxSTBC; |
| |
| if (pconfig->enable2x2 && (cfg->num_rf_chains == 2)) { |
| pconfig->enable2x2 = 1; |
| } else { |
| pconfig->enable2x2 = 0; |
| enable_tx_stbc = 0; |
| |
| /* 1x1 */ |
| /* Update Rx Highest Long GI data Rate */ |
| if (sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_RX_HIGHEST_SUPPORTED_DATA_RATE, |
| VHT_RX_HIGHEST_SUPPORTED_DATA_RATE_1_1) |
| == QDF_STATUS_E_FAILURE) { |
| hdd_err("Could not pass on WNI_CFG_VHT_RX_HIGHEST_SUPPORTED_DATA_RATE to CCM"); |
| } |
| |
| /* Update Tx Highest Long GI data Rate */ |
| if (sme_cfg_set_int |
| (hdd_ctx->hHal, |
| WNI_CFG_VHT_TX_HIGHEST_SUPPORTED_DATA_RATE, |
| VHT_TX_HIGHEST_SUPPORTED_DATA_RATE_1_1) == |
| QDF_STATUS_E_FAILURE) { |
| hdd_err("VHT_TX_HIGHEST_SUPP_RATE_1_1 to CCM fail"); |
| } |
| } |
| if (!(cfg->ht_tx_stbc && pconfig->enable2x2)) |
| enable_tx_stbc = 0; |
| phtCapInfo->txSTBC = enable_tx_stbc; |
| |
| val32 = val16; |
| status = sme_cfg_set_int(hdd_ctx->hHal, WNI_CFG_HT_CAP_INFO, val32); |
| if (status != QDF_STATUS_SUCCESS) |
| hdd_err("could not set HT capability to CCM"); |
| #define WLAN_HDD_RX_MCS_ALL_NSTREAM_RATES 0xff |
| value = SIZE_OF_SUPPORTED_MCS_SET; |
| if (sme_cfg_get_str(hdd_ctx->hHal, WNI_CFG_SUPPORTED_MCS_SET, mcs_set, |
| &value) == QDF_STATUS_SUCCESS) { |
| hdd_debug("Read MCS rate set"); |
| |
| if (pconfig->enable2x2) { |
| for (value = 0; value < cfg->num_rf_chains; value++) |
| mcs_set[value] = |
| WLAN_HDD_RX_MCS_ALL_NSTREAM_RATES; |
| |
| status = |
| sme_cfg_set_str(hdd_ctx->hHal, |
| WNI_CFG_SUPPORTED_MCS_SET, |
| mcs_set, |
| SIZE_OF_SUPPORTED_MCS_SET); |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set MCS SET to CCM"); |
| } |
| } |
| #undef WLAN_HDD_RX_MCS_ALL_NSTREAM_RATES |
| } |
| |
| static void hdd_update_tgt_vht_cap(hdd_context_t *hdd_ctx, |
| struct wma_tgt_vht_cap *cfg) |
| { |
| QDF_STATUS status; |
| uint32_t value = 0; |
| struct hdd_config *pconfig = hdd_ctx->config; |
| struct wiphy *wiphy = hdd_ctx->wiphy; |
| struct ieee80211_supported_band *band_5g = |
| wiphy->bands[NL80211_BAND_5GHZ]; |
| uint32_t temp = 0; |
| uint32_t ch_width = eHT_CHANNEL_WIDTH_80MHZ; |
| |
| if (!band_5g) { |
| hdd_debug("5GHz band disabled, skipping capability population"); |
| return; |
| } |
| |
| /* Get the current MPDU length */ |
| status = |
| sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_MAX_MPDU_LENGTH, |
| &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get MPDU LENGTH"); |
| value = 0; |
| } |
| |
| /* |
| * VHT max MPDU length: |
| * override if user configured value is too high |
| * that the target cannot support |
| */ |
| if (value > cfg->vht_max_mpdu) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_MAX_MPDU_LENGTH, |
| cfg->vht_max_mpdu); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set VHT MAX MPDU LENGTH"); |
| } |
| |
| sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_BASIC_MCS_SET, &temp); |
| temp = (temp & VHT_MCS_1x1) | pconfig->vhtRxMCS; |
| |
| if (pconfig->enable2x2) |
| temp = (temp & VHT_MCS_2x2) | (pconfig->vhtRxMCS2x2 << 2); |
| |
| if (sme_cfg_set_int(hdd_ctx->hHal, WNI_CFG_VHT_BASIC_MCS_SET, temp) == |
| QDF_STATUS_E_FAILURE) { |
| hdd_err("Could not pass VHT_BASIC_MCS_SET to CCM"); |
| } |
| |
| sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_RX_MCS_MAP, &temp); |
| temp = (temp & VHT_MCS_1x1) | pconfig->vhtRxMCS; |
| if (pconfig->enable2x2) |
| temp = (temp & VHT_MCS_2x2) | (pconfig->vhtRxMCS2x2 << 2); |
| |
| if (sme_cfg_set_int(hdd_ctx->hHal, WNI_CFG_VHT_RX_MCS_MAP, temp) == |
| QDF_STATUS_E_FAILURE) { |
| hdd_err("Could not pass WNI_CFG_VHT_RX_MCS_MAP to CCM"); |
| } |
| |
| sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_TX_MCS_MAP, &temp); |
| temp = (temp & VHT_MCS_1x1) | pconfig->vhtTxMCS; |
| if (pconfig->enable2x2) |
| temp = (temp & VHT_MCS_2x2) | (pconfig->vhtTxMCS2x2 << 2); |
| |
| hdd_debug("vhtRxMCS2x2 - %x temp - %u enable2x2 %d", |
| pconfig->vhtRxMCS2x2, temp, pconfig->enable2x2); |
| |
| if (sme_cfg_set_int(hdd_ctx->hHal, WNI_CFG_VHT_TX_MCS_MAP, temp) == |
| QDF_STATUS_E_FAILURE) { |
| hdd_err("Could not pass WNI_CFG_VHT_TX_MCS_MAP to CCM"); |
| } |
| /* Get the current RX LDPC setting */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_LDPC_CODING_CAP, |
| &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get VHT LDPC CODING CAP"); |
| value = 0; |
| } |
| |
| /* Set the LDPC capability */ |
| if (value && !cfg->vht_rx_ldpc) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_LDPC_CODING_CAP, |
| cfg->vht_rx_ldpc); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set VHT LDPC CODING CAP to CCM"); |
| } |
| |
| /* Get current GI 80 value */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_SHORT_GI_80MHZ, |
| &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get SHORT GI 80MHZ"); |
| value = 0; |
| } |
| |
| /* set the Guard interval 80MHz */ |
| if (value && !cfg->vht_short_gi_80) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_SHORT_GI_80MHZ, |
| cfg->vht_short_gi_80); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set SHORT GI 80MHZ to CCM"); |
| } |
| |
| /* Get VHT TX STBC cap */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_TXSTBC, &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get VHT TX STBC"); |
| value = 0; |
| } |
| |
| /* VHT TX STBC cap */ |
| if (value && !cfg->vht_tx_stbc) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, WNI_CFG_VHT_TXSTBC, |
| cfg->vht_tx_stbc); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set the VHT TX STBC to CCM"); |
| } |
| |
| /* Get VHT RX STBC cap */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_RXSTBC, &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get VHT RX STBC"); |
| value = 0; |
| } |
| |
| /* VHT RX STBC cap */ |
| if (value && !cfg->vht_rx_stbc) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, WNI_CFG_VHT_RXSTBC, |
| cfg->vht_rx_stbc); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set the VHT RX STBC to CCM"); |
| } |
| |
| /* Get VHT SU Beamformer cap */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_SU_BEAMFORMER_CAP, |
| &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get VHT SU BEAMFORMER CAP"); |
| value = 0; |
| } |
| |
| /* set VHT SU Beamformer cap */ |
| if (value && !cfg->vht_su_bformer) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_SU_BEAMFORMER_CAP, |
| cfg->vht_su_bformer); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set VHT SU BEAMFORMER CAP"); |
| } |
| |
| /* check and update SU BEAMFORMEE capabality */ |
| if (pconfig->enableTxBF && !cfg->vht_su_bformee) |
| pconfig->enableTxBF = cfg->vht_su_bformee; |
| |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_SU_BEAMFORMEE_CAP, |
| pconfig->enableTxBF); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set VHT SU BEAMFORMEE CAP"); |
| |
| /* Get VHT MU Beamformer cap */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_MU_BEAMFORMER_CAP, |
| &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get VHT MU BEAMFORMER CAP"); |
| value = 0; |
| } |
| |
| /* set VHT MU Beamformer cap */ |
| if (value && !cfg->vht_mu_bformer) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_MU_BEAMFORMER_CAP, |
| cfg->vht_mu_bformer); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set the VHT MU BEAMFORMER CAP to CCM"); |
| } |
| |
| /* Get VHT MU Beamformee cap */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_MU_BEAMFORMEE_CAP, |
| &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get VHT MU BEAMFORMEE CAP"); |
| value = 0; |
| } |
| |
| /* set VHT MU Beamformee cap */ |
| if (value && !cfg->vht_mu_bformee) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_MU_BEAMFORMEE_CAP, |
| cfg->vht_mu_bformee); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set VHT MU BEAMFORMER CAP"); |
| } |
| |
| /* Get VHT MAX AMPDU Len exp */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_AMPDU_LEN_EXPONENT, |
| &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get VHT AMPDU LEN"); |
| value = 0; |
| } |
| |
| /* |
| * VHT max AMPDU len exp: |
| * override if user configured value is too high |
| * that the target cannot support. |
| * Even though Rome publish ampdu_len=7, it can |
| * only support 4 because of some h/w bug. |
| */ |
| |
| if (value > cfg->vht_max_ampdu_len_exp) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_AMPDU_LEN_EXPONENT, |
| cfg->vht_max_ampdu_len_exp); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set the VHT AMPDU LEN EXP"); |
| } |
| |
| /* Get VHT TXOP PS CAP */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, WNI_CFG_VHT_TXOP_PS, &value); |
| |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get VHT TXOP PS"); |
| value = 0; |
| } |
| |
| /* set VHT TXOP PS cap */ |
| if (value && !cfg->vht_txop_ps) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, WNI_CFG_VHT_TXOP_PS, |
| cfg->vht_txop_ps); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set the VHT TXOP PS"); |
| } |
| |
| if (WMI_VHT_CAP_MAX_MPDU_LEN_11454 == cfg->vht_max_mpdu) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454; |
| else if (WMI_VHT_CAP_MAX_MPDU_LEN_7935 == cfg->vht_max_mpdu) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991; |
| else |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895; |
| |
| |
| if (cfg->supp_chan_width & (1 << eHT_CHANNEL_WIDTH_80P80MHZ)) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_SUPPORTED_CHAN_WIDTH_SET, |
| VHT_CAP_160_AND_80P80_SUPP); |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set the VHT CAP 160"); |
| band_5g->vht_cap.cap |= |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ; |
| ch_width = eHT_CHANNEL_WIDTH_80P80MHZ; |
| } else if (cfg->supp_chan_width & (1 << eHT_CHANNEL_WIDTH_160MHZ)) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_SUPPORTED_CHAN_WIDTH_SET, |
| VHT_CAP_160_SUPP); |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("could not set the VHT CAP 160"); |
| band_5g->vht_cap.cap |= |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; |
| ch_width = eHT_CHANNEL_WIDTH_160MHZ; |
| } |
| pconfig->vhtChannelWidth = QDF_MIN(pconfig->vhtChannelWidth, |
| ch_width); |
| /* Get the current GI 160 value */ |
| status = sme_cfg_get_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_SHORT_GI_160_AND_80_PLUS_80MHZ, |
| &value); |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("could not get GI 80 & 160"); |
| value = 0; |
| } |
| /* set the Guard interval 160MHz */ |
| if (value && !cfg->vht_short_gi_160) { |
| status = sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_SHORT_GI_160_AND_80_PLUS_80MHZ, |
| cfg->vht_short_gi_160); |
| |
| if (status == QDF_STATUS_E_FAILURE) |
| hdd_err("failed to set SHORT GI 160MHZ"); |
| } |
| |
| if (cfg->vht_rx_ldpc & WMI_VHT_CAP_RX_LDPC) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_RXLDPC; |
| |
| if (cfg->vht_short_gi_80 & WMI_VHT_CAP_SGI_80MHZ) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_SHORT_GI_80; |
| if (cfg->vht_short_gi_160 & WMI_VHT_CAP_SGI_160MHZ) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_SHORT_GI_160; |
| |
| if (cfg->vht_tx_stbc & WMI_VHT_CAP_TX_STBC) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_TXSTBC; |
| |
| if (cfg->vht_rx_stbc & WMI_VHT_CAP_RX_STBC_1SS) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_RXSTBC_1; |
| if (cfg->vht_rx_stbc & WMI_VHT_CAP_RX_STBC_2SS) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_RXSTBC_2; |
| if (cfg->vht_rx_stbc & WMI_VHT_CAP_RX_STBC_3SS) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_RXSTBC_3; |
| |
| band_5g->vht_cap.cap |= |
| (cfg->vht_max_ampdu_len_exp << |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT); |
| |
| if (cfg->vht_su_bformer & WMI_VHT_CAP_SU_BFORMER) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE; |
| if (cfg->vht_su_bformee & WMI_VHT_CAP_SU_BFORMEE) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE; |
| if (cfg->vht_mu_bformer & WMI_VHT_CAP_MU_BFORMER) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE; |
| if (cfg->vht_mu_bformee & WMI_VHT_CAP_MU_BFORMEE) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; |
| |
| if (cfg->vht_txop_ps & WMI_VHT_CAP_TXOP_PS) |
| band_5g->vht_cap.cap |= IEEE80211_VHT_CAP_VHT_TXOP_PS; |
| |
| } |
| |
| /** |
| * hdd_generate_macaddr_auto() - Auto-generate mac address |
| * @hdd_ctx: Pointer to the HDD context |
| * |
| * Auto-generate mac address using device serial number. |
| * Keep the first 3 bytes of OUI as before and replace |
| * the last 3 bytes with the lower 3 bytes of serial number. |
| * |
| * Return: 0 for success |
| * Non zero failure code for errors |
| */ |
| static int hdd_generate_macaddr_auto(hdd_context_t *hdd_ctx) |
| { |
| unsigned int serialno = 0; |
| struct qdf_mac_addr mac_addr = { |
| {0x00, 0x0A, 0xF5, 0x00, 0x00, 0x00} |
| }; |
| |
| serialno = pld_socinfo_get_serial_number(hdd_ctx->parent_dev); |
| if (serialno == 0) |
| return -EINVAL; |
| |
| serialno &= 0x00ffffff; |
| |
| mac_addr.bytes[3] = (serialno >> 16) & 0xff; |
| mac_addr.bytes[4] = (serialno >> 8) & 0xff; |
| mac_addr.bytes[5] = serialno & 0xff; |
| |
| hdd_update_macaddr(hdd_ctx->config, mac_addr); |
| return 0; |
| } |
| |
| /** |
| * hdd_update_ra_rate_limit() - Update RA rate limit from target |
| * configuration to cfg_ini in HDD |
| * @hdd_ctx: Pointer to hdd_ctx |
| * @cfg: target configuration |
| * |
| * Return: None |
| */ |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| static void hdd_update_ra_rate_limit(hdd_context_t *hdd_ctx, |
| struct wma_tgt_cfg *cfg) |
| { |
| hdd_ctx->config->IsRArateLimitEnabled = cfg->is_ra_rate_limit_enabled; |
| } |
| #else |
| static void hdd_update_ra_rate_limit(hdd_context_t *hdd_ctx, |
| struct wma_tgt_cfg *cfg) |
| { |
| } |
| #endif |
| |
| void hdd_update_tgt_cfg(void *context, void *param) |
| { |
| int ret; |
| hdd_context_t *hdd_ctx = (hdd_context_t *) context; |
| struct wma_tgt_cfg *cfg = param; |
| uint8_t temp_band_cap; |
| struct cds_config_info *cds_cfg = cds_get_ini_config(); |
| uint8_t antenna_mode; |
| |
| /* Reuse same pdev for module start/stop or SSR */ |
| if ((hdd_get_conparam() == QDF_GLOBAL_FTM_MODE) || |
| !cds_is_driver_loading()) { |
| hdd_err("Reuse pdev for module start/stop or SSR"); |
| /* Restore pdev to MAC/WMA contexts */ |
| sme_store_pdev(hdd_ctx->hHal, hdd_ctx->hdd_pdev); |
| } else { |
| ret = hdd_objmgr_create_and_store_pdev(hdd_ctx); |
| if (ret) { |
| hdd_err("pdev creation fails!"); |
| QDF_BUG(0); |
| } |
| } |
| |
| if (cds_cfg) { |
| if (hdd_ctx->config->enable_sub_20_channel_width != |
| WLAN_SUB_20_CH_WIDTH_NONE && !cfg->sub_20_support) { |
| hdd_err("User requested sub 20 MHz channel width but unsupported by FW."); |
| cds_cfg->sub_20_channel_width = |
| WLAN_SUB_20_CH_WIDTH_NONE; |
| } else { |
| cds_cfg->sub_20_channel_width = |
| hdd_ctx->config->enable_sub_20_channel_width; |
| } |
| } |
| |
| /* first store the INI band capability */ |
| temp_band_cap = hdd_ctx->config->nBandCapability; |
| |
| hdd_ctx->config->nBandCapability = cfg->band_cap; |
| |
| /* |
| * now overwrite the target band capability with INI |
| * setting if INI setting is a subset |
| */ |
| |
| if ((hdd_ctx->config->nBandCapability == eCSR_BAND_ALL) && |
| (temp_band_cap != eCSR_BAND_ALL)) |
| hdd_ctx->config->nBandCapability = temp_band_cap; |
| else if ((hdd_ctx->config->nBandCapability != eCSR_BAND_ALL) && |
| (temp_band_cap != eCSR_BAND_ALL) && |
| (hdd_ctx->config->nBandCapability != temp_band_cap)) { |
| hdd_warn("ini BandCapability not supported by the target"); |
| } |
| |
| if (!cds_is_driver_recovering()) { |
| hdd_ctx->reg.reg_domain = cfg->reg_domain; |
| hdd_ctx->reg.eeprom_rd_ext = cfg->eeprom_rd_ext; |
| } |
| |
| /* This can be extended to other configurations like ht, vht cap... */ |
| |
| if (!qdf_is_macaddr_zero(&cfg->hw_macaddr)) { |
| hdd_update_macaddr(hdd_ctx->config, cfg->hw_macaddr); |
| hdd_ctx->update_mac_addr_to_fw = false; |
| } else { |
| static struct qdf_mac_addr default_mac_addr = { |
| {0x00, 0x0A, 0xF5, 0x89, 0x89, 0xFF} |
| }; |
| if (qdf_is_macaddr_equal(&hdd_ctx->config->intfMacAddr[0], |
| &default_mac_addr)) { |
| if (hdd_generate_macaddr_auto(hdd_ctx) != 0) |
| hdd_err("Fail to auto-generate MAC, using MAC from ini file " |
| MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(hdd_ctx->config-> |
| intfMacAddr[0].bytes)); |
| } else { |
| hdd_err("Invalid MAC passed from target, using MAC from ini file " |
| MAC_ADDRESS_STR, |
| MAC_ADDR_ARRAY(hdd_ctx->config-> |
| intfMacAddr[0].bytes)); |
| } |
| hdd_ctx->update_mac_addr_to_fw = true; |
| } |
| |
| hdd_ctx->target_fw_version = cfg->target_fw_version; |
| hdd_ctx->target_fw_vers_ext = cfg->target_fw_vers_ext; |
| |
| hdd_ctx->max_intf_count = cfg->max_intf_count; |
| |
| hdd_lpass_target_config(hdd_ctx, cfg); |
| hdd_green_ap_target_config(hdd_ctx, cfg); |
| |
| hdd_ctx->ap_arpns_support = cfg->ap_arpns_support; |
| hdd_update_tgt_services(hdd_ctx, &cfg->services); |
| |
| hdd_update_tgt_ht_cap(hdd_ctx, &cfg->ht_cap); |
| |
| hdd_update_tgt_vht_cap(hdd_ctx, &cfg->vht_cap); |
| if (cfg->services.en_11ax) { |
| hdd_info("11AX: 11ax is enabled - update HDD config"); |
| hdd_update_tgt_he_cap(hdd_ctx, cfg); |
| } |
| |
| hdd_update_vdev_nss(hdd_ctx); |
| |
| hdd_update_hw_dbs_capable(hdd_ctx); |
| |
| hdd_ctx->config->fine_time_meas_cap &= cfg->fine_time_measurement_cap; |
| hdd_ctx->fine_time_meas_cap_target = cfg->fine_time_measurement_cap; |
| hdd_debug("fine_time_meas_cap: 0x%x", |
| hdd_ctx->config->fine_time_meas_cap); |
| |
| antenna_mode = (hdd_ctx->config->enable2x2 == 0x01) ? |
| HDD_ANTENNA_MODE_2X2 : HDD_ANTENNA_MODE_1X1; |
| hdd_update_smps_antenna_mode(hdd_ctx, antenna_mode); |
| hdd_debug("Init current antenna mode: %d", |
| hdd_ctx->current_antenna_mode); |
| |
| hdd_ctx->bpf_enabled = (cfg->bpf_enabled && |
| hdd_ctx->config->bpf_packet_filter_enable); |
| hdd_update_ra_rate_limit(hdd_ctx, cfg); |
| |
| if ((hdd_ctx->config->txBFCsnValue > |
| WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_FW_DEF) && |
| !cfg->tx_bfee_8ss_enabled) |
| hdd_ctx->config->txBFCsnValue = |
| WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED_FW_DEF; |
| |
| if (sme_cfg_set_int(hdd_ctx->hHal, |
| WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED, |
| hdd_ctx->config->txBFCsnValue) == QDF_STATUS_E_FAILURE) |
| hdd_err("fw update WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED to CFG fails"); |
| |
| |
| hdd_debug("Target BPF %d Host BPF %d 8ss fw support %d txBFCsnValue %d", |
| cfg->bpf_enabled, hdd_ctx->config->bpf_packet_filter_enable, |
| cfg->tx_bfee_8ss_enabled, hdd_ctx->config->txBFCsnValue); |
| /* |
| * If BPF is enabled, maxWowFilters set to WMA_STA_WOW_DEFAULT_PTRN_MAX |
| * because we need atleast WMA_STA_WOW_DEFAULT_PTRN_MAX free slots to |
| * configure the STA mode wow pattern. |
| */ |
| if (hdd_ctx->bpf_enabled) |
| hdd_ctx->config->maxWoWFilters = WMA_STA_WOW_DEFAULT_PTRN_MAX; |
| |
| hdd_ctx->wmi_max_len = cfg->wmi_max_len; |
| |
| /* Configure NAN datapath features */ |
| hdd_nan_datapath_target_config(hdd_ctx, cfg); |
| hdd_ctx->dfs_cac_offload = cfg->dfs_cac_offload; |
| } |
| |
| bool hdd_dfs_indicate_radar(hdd_context_t *hdd_ctx) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| hdd_adapter_t *adapter; |
| QDF_STATUS status; |
| hdd_ap_ctx_t *ap_ctx; |
| |
| if (!hdd_ctx || hdd_ctx->config->disableDFSChSwitch) { |
| hdd_info("skip tx block hdd_ctx=%p, disableDFSChSwitch=%d", |
| hdd_ctx, hdd_ctx->config->disableDFSChSwitch); |
| return true; |
| } |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| ap_ctx = WLAN_HDD_GET_AP_CTX_PTR(adapter); |
| |
| if ((QDF_SAP_MODE == adapter->device_mode || |
| QDF_P2P_GO_MODE == adapter->device_mode) && |
| (wlan_reg_is_dfs_ch(hdd_ctx->hdd_pdev, |
| ap_ctx->operatingChannel))) { |
| WLAN_HDD_GET_AP_CTX_PTR(adapter)->dfs_cac_block_tx = |
| true; |
| hdd_info("tx blocked for session: %d", |
| adapter->sessionId); |
| } |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * hdd_is_valid_mac_address() - validate MAC address |
| * @pMacAddr: Pointer to the input MAC address |
| * |
| * This function validates whether the given MAC address is valid or not |
| * Expected MAC address is of the format XX:XX:XX:XX:XX:XX |
| * where X is the hexa decimal digit character and separated by ':' |
| * This algorithm works even if MAC address is not separated by ':' |
| * |
| * This code checks given input string mac contains exactly 12 hexadecimal |
| * digits and a separator colon : appears in the input string only after |
| * an even number of hex digits. |
| * |
| * Return: 1 for valid and 0 for invalid |
| */ |
| bool hdd_is_valid_mac_address(const uint8_t *pMacAddr) |
| { |
| int xdigit = 0; |
| int separator = 0; |
| |
| while (*pMacAddr) { |
| if (isxdigit(*pMacAddr)) { |
| xdigit++; |
| } else if (':' == *pMacAddr) { |
| if (0 == xdigit || ((xdigit / 2) - 1) != separator) |
| break; |
| |
| ++separator; |
| } else { |
| /* Invalid MAC found */ |
| return 0; |
| } |
| ++pMacAddr; |
| } |
| return xdigit == 12 && (separator == 5 || separator == 0); |
| } |
| |
| /** |
| * hdd_mon_mode_ether_setup() - Update monitor mode struct net_device. |
| * @dev: Handle to struct net_device to be updated. |
| * |
| * Return: None |
| */ |
| static void hdd_mon_mode_ether_setup(struct net_device *dev) |
| { |
| dev->header_ops = NULL; |
| dev->type = ARPHRD_IEEE80211_RADIOTAP; |
| dev->hard_header_len = ETH_HLEN; |
| dev->mtu = ETH_DATA_LEN; |
| dev->addr_len = ETH_ALEN; |
| dev->tx_queue_len = 1000; /* Ethernet wants good queues */ |
| dev->flags = IFF_BROADCAST|IFF_MULTICAST; |
| dev->priv_flags |= IFF_TX_SKB_SHARING; |
| |
| memset(dev->broadcast, 0xFF, ETH_ALEN); |
| } |
| |
| /** |
| * __hdd__mon_open() - HDD Open function |
| * @dev: Pointer to net_device structure |
| * |
| * This is called in response to ifconfig up |
| * |
| * Return: 0 for success; non-zero for failure |
| */ |
| static int __hdd_mon_open(struct net_device *dev) |
| { |
| int ret; |
| |
| ENTER_DEV(dev); |
| hdd_mon_mode_ether_setup(dev); |
| ret = hdd_set_mon_rx_cb(dev); |
| return ret; |
| } |
| |
| /** |
| * hdd_mon_open() - Wrapper function for __hdd_mon_open to protect it from SSR |
| * @dev: Pointer to net_device structure |
| * |
| * This is called in response to ifconfig up |
| * |
| * Return: 0 for success; non-zero for failure |
| */ |
| static int hdd_mon_open(struct net_device *dev) |
| { |
| int ret; |
| |
| cds_ssr_protect(__func__); |
| ret = __hdd_mon_open(dev); |
| cds_ssr_unprotect(__func__); |
| |
| return ret; |
| } |
| |
| /** |
| * hdd_start_adapter() - Wrapper function for device specific adapter |
| * @adapter: pointer to HDD adapter |
| * |
| * This function is called to start the device specific adapter for |
| * the mode passed in the adapter's device_mode. |
| * |
| * Return: 0 for success; non-zero for failure |
| */ |
| int hdd_start_adapter(hdd_adapter_t *adapter) |
| { |
| |
| int ret; |
| enum tQDF_ADAPTER_MODE device_mode = adapter->device_mode; |
| |
| ENTER_DEV(adapter->dev); |
| hdd_debug("Start_adapter for mode : %d", adapter->device_mode); |
| |
| switch (device_mode) { |
| case QDF_P2P_CLIENT_MODE: |
| case QDF_P2P_DEVICE_MODE: |
| case QDF_OCB_MODE: |
| case QDF_STA_MODE: |
| case QDF_MONITOR_MODE: |
| ret = hdd_start_station_adapter(adapter); |
| if (ret) |
| goto err_start_adapter; |
| break; |
| case QDF_P2P_GO_MODE: |
| case QDF_SAP_MODE: |
| ret = hdd_start_ap_adapter(adapter); |
| if (ret) |
| goto err_start_adapter; |
| break; |
| case QDF_IBSS_MODE: |
| /* |
| * For IBSS interface is initialized as part of |
| * hdd_init_station_mode() |
| */ |
| return 0; |
| case QDF_FTM_MODE: |
| ret = hdd_start_ftm_adapter(adapter); |
| if (ret) |
| goto err_start_adapter; |
| break; |
| default: |
| hdd_err("Invalid session type %d", device_mode); |
| QDF_ASSERT(0); |
| goto err_start_adapter; |
| } |
| if (hdd_set_fw_params(adapter)) |
| hdd_err("Failed to set the FW params for the adapter!"); |
| |
| /* |
| * Action frame registered in one adapter which will |
| * applicable to all interfaces |
| */ |
| wlan_hdd_cfg80211_register_frames(adapter); |
| EXIT(); |
| return 0; |
| err_start_adapter: |
| return -EINVAL; |
| } |
| |
| /** |
| * hdd_enable_power_management() - API to Enable Power Management |
| * |
| * API invokes Bus Interface Layer power management functionality |
| * |
| * Return: None |
| */ |
| static void hdd_enable_power_management(void) |
| { |
| void *hif_ctx = cds_get_context(QDF_MODULE_ID_HIF); |
| |
| if (!hif_ctx) { |
| hdd_err("Bus Interface Context is Invalid"); |
| return; |
| } |
| |
| hif_enable_power_management(hif_ctx, cds_is_packet_log_enabled()); |
| } |
| |
| /** |
| * hdd_disable_power_management() - API to disable Power Management |
| * |
| * API disable Bus Interface Layer Power management functionality |
| * |
| * Return: None |
| */ |
| static void hdd_disable_power_management(void) |
| { |
| void *hif_ctx = cds_get_context(QDF_MODULE_ID_HIF); |
| |
| if (!hif_ctx) { |
| hdd_err("Bus Interface Context is Invalid"); |
| return; |
| } |
| |
| hif_disable_power_management(hif_ctx); |
| } |
| |
| /** |
| * hdd_update_hw_sw_info() - API to update the HW/SW information |
| * |
| * API to update the HW and SW information in the driver |
| * |
| * Return: None |
| */ |
| static void hdd_update_hw_sw_info(hdd_context_t *hdd_ctx) |
| { |
| void *hif_sc; |
| |
| hif_sc = cds_get_context(QDF_MODULE_ID_HIF); |
| if (!hif_sc) { |
| hdd_err("HIF context is NULL"); |
| return; |
| } |
| |
| /* |
| * target hw version/revision would only be retrieved after firmware |
| * download |
| */ |
| hif_get_hw_info(hif_sc, &hdd_ctx->target_hw_version, |
| &hdd_ctx->target_hw_revision, |
| &hdd_ctx->target_hw_name); |
| |
| /* Get the wlan hw/fw version */ |
| hdd_wlan_get_version(hdd_ctx, NULL, NULL); |
| |
| return; |
| } |
| |
| /** |
| * hdd_update_cds_ac_specs_params() - update cds ac_specs params |
| * @hdd_ctx: Pointer to hdd context |
| * |
| * Return: none |
| */ |
| static void |
| hdd_update_cds_ac_specs_params(hdd_context_t *hdd_ctx) |
| { |
| uint8_t num_entries = 0; |
| uint8_t tx_sched_wrr_param[TX_SCHED_WRR_PARAMS_NUM]; |
| uint8_t *tx_sched_wrr_ac; |
| int i; |
| cds_context_type *cds_ctx; |
| |
| if (NULL == hdd_ctx) |
| return; |
| |
| if (NULL == hdd_ctx->config) { |
| /* Do nothing if hdd_ctx is invalid */ |
| hdd_err("%s: Warning: hdd_ctx->cfg_ini is NULL", __func__); |
| return; |
| } |
| |
| cds_ctx = cds_get_context(QDF_MODULE_ID_QDF); |
| |
| if (!cds_ctx) { |
| hdd_err("Invalid CDS Context"); |
| return; |
| } |
| |
| for (i = 0; i < OL_TX_NUM_WMM_AC; i++) { |
| switch (i) { |
| case OL_TX_WMM_AC_BE: |
| tx_sched_wrr_ac = hdd_ctx->config->tx_sched_wrr_be; |
| break; |
| case OL_TX_WMM_AC_BK: |
| tx_sched_wrr_ac = hdd_ctx->config->tx_sched_wrr_bk; |
| break; |
| case OL_TX_WMM_AC_VI: |
| tx_sched_wrr_ac = hdd_ctx->config->tx_sched_wrr_vi; |
| break; |
| case OL_TX_WMM_AC_VO: |
| tx_sched_wrr_ac = hdd_ctx->config->tx_sched_wrr_vo; |
| break; |
| default: |
| tx_sched_wrr_ac = NULL; |
| break; |
| } |
| |
| hdd_string_to_u8_array(tx_sched_wrr_ac, |
| tx_sched_wrr_param, |
| &num_entries, |
| sizeof(tx_sched_wrr_param)); |
| |
| if (num_entries == TX_SCHED_WRR_PARAMS_NUM) { |
| cds_ctx->ac_specs[i].wrr_skip_weight = |
| tx_sched_wrr_param[0]; |
| cds_ctx->ac_specs[i].credit_threshold = |
| tx_sched_wrr_param[1]; |
| cds_ctx->ac_specs[i].send_limit = |
| tx_sched_wrr_param[2]; |
| cds_ctx->ac_specs[i].credit_reserve = |
| tx_sched_wrr_param[3]; |
| cds_ctx->ac_specs[i].discard_weight = |
| tx_sched_wrr_param[4]; |
| } |
| |
| num_entries = 0; |
| } |
| } |
| |
| #ifdef FEATURE_WLAN_MCC_TO_SCC_SWITCH |
| static enum policy_mgr_con_mode wlan_hdd_get_mode_for_non_connected_vdev( |
| struct wlan_objmgr_psoc *psoc, uint8_t vdev_id) |
| { |
| hdd_adapter_t *adapter = NULL; |
| hdd_context_t *hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| |
| adapter = hdd_get_adapter_by_vdev(hdd_ctx, vdev_id); |
| if (!adapter) { |
| hdd_err("Adapter is NULL"); |
| return PM_MAX_NUM_OF_MODE; |
| } |
| |
| return policy_mgr_convert_device_mode_to_qdf_type( |
| adapter->device_mode); |
| } |
| |
| static void hdd_register_policy_manager_callback( |
| struct wlan_objmgr_psoc *psoc) |
| { |
| struct policy_mgr_hdd_cbacks hdd_cbacks; |
| hdd_cbacks.sap_restart_chan_switch_cb = |
| sap_restart_chan_switch_cb; |
| hdd_cbacks.wlan_hdd_get_channel_for_sap_restart = |
| wlan_hdd_get_channel_for_sap_restart; |
| hdd_cbacks.get_mode_for_non_connected_vdev = |
| wlan_hdd_get_mode_for_non_connected_vdev; |
| |
| if (QDF_STATUS_SUCCESS != |
| policy_mgr_register_hdd_cb(psoc, &hdd_cbacks)) { |
| hdd_err("HDD callback registration with policy manager failed"); |
| } |
| } |
| #else |
| static void hdd_register_policy_manager_callback( |
| struct wlan_objmgr_psoc *psoc) |
| { |
| } |
| #endif |
| |
| #ifdef WLAN_FEATURE_NAN_CONVERGENCE |
| static void hdd_nan_register_callbacks(hdd_context_t *hdd_ctx) |
| { |
| struct nan_callbacks cb_obj = {0}; |
| |
| cb_obj.ndi_open = hdd_ndi_open; |
| cb_obj.ndi_close = hdd_ndi_close; |
| cb_obj.ndi_start = hdd_ndi_start; |
| cb_obj.ndi_delete = hdd_ndi_delete; |
| cb_obj.drv_ndi_create_rsp_handler = hdd_ndi_drv_ndi_create_rsp_handler; |
| cb_obj.drv_ndi_delete_rsp_handler = hdd_ndi_drv_ndi_delete_rsp_handler; |
| |
| cb_obj.new_peer_ind = hdd_ndp_new_peer_handler; |
| cb_obj.get_peer_idx = hdd_ndp_get_peer_idx; |
| cb_obj.peer_departed_ind = hdd_ndp_peer_departed_handler; |
| |
| os_if_nan_register_hdd_callbacks(hdd_ctx->hdd_psoc, &cb_obj); |
| } |
| #else |
| static void hdd_nan_register_callbacks(hdd_context_t *hdd_ctx) |
| { |
| } |
| #endif |
| |
| /** |
| * hdd_wlan_start_modules() - Single driver state machine for starting modules |
| * @hdd_ctx: HDD context |
| * @adapter: HDD adapter |
| * @reinit: flag to indicate from SSR or normal path |
| * |
| * This function maintains the driver state machine it will be invoked from |
| * startup, reinit and change interface. Depending on the driver state shall |
| * perform the opening of the modules. |
| * |
| * Return: 0 for success; non-zero for failure |
| */ |
| int hdd_wlan_start_modules(hdd_context_t *hdd_ctx, hdd_adapter_t *adapter, |
| bool reinit) |
| { |
| int ret; |
| qdf_device_t qdf_dev; |
| QDF_STATUS status; |
| p_cds_contextType p_cds_context; |
| bool unint = false; |
| void *hif_ctx; |
| |
| ENTER(); |
| |
| p_cds_context = cds_get_global_context(); |
| if (!p_cds_context) { |
| hdd_err("Global Context is NULL"); |
| QDF_ASSERT(0); |
| return -EINVAL; |
| } |
| |
| hdd_debug("start modules called in state! :%d reinit: %d", |
| hdd_ctx->driver_status, reinit); |
| |
| qdf_dev = cds_get_context(QDF_MODULE_ID_QDF_DEVICE); |
| if (!qdf_dev) { |
| hdd_err("QDF Device Context is Invalid return"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&hdd_ctx->iface_change_lock); |
| hdd_ctx->start_modules_in_progress = true; |
| |
| if (QDF_TIMER_STATE_RUNNING == |
| qdf_mc_timer_get_current_state(&hdd_ctx->iface_change_timer)) { |
| |
| hdd_set_idle_ps_config(hdd_ctx, false); |
| hdd_debug("Interface change Timer running Stop timer"); |
| qdf_mc_timer_stop(&hdd_ctx->iface_change_timer); |
| } |
| |
| switch (hdd_ctx->driver_status) { |
| case DRIVER_MODULES_UNINITIALIZED: |
| unint = true; |
| /* Fall through dont add break here */ |
| case DRIVER_MODULES_CLOSED: |
| if (!reinit && !unint) { |
| ret = pld_power_on(qdf_dev->dev); |
| if (ret) { |
| hdd_err("Failed to Powerup the device: %d", ret); |
| goto release_lock; |
| } |
| } |
| ret = hdd_hif_open(qdf_dev->dev, qdf_dev->drv_hdl, qdf_dev->bid, |
| qdf_dev->bus_type, |
| (reinit == true) ? HIF_ENABLE_TYPE_REINIT : |
| HIF_ENABLE_TYPE_PROBE); |
| if (ret) { |
| hdd_err("Failed to open hif: %d", ret); |
| goto power_down; |
| } |
| |
| hif_ctx = cds_get_context(QDF_MODULE_ID_HIF); |
| if (!hif_ctx) { |
| hdd_err("hif context is null!!"); |
| goto power_down; |
| } |
| |
| status = ol_cds_init(qdf_dev, hif_ctx); |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("No Memory to Create BMI Context :%d", status); |
| goto hif_close; |
| } |
| |
| ret = hdd_update_config(hdd_ctx); |
| if (ret) { |
| hdd_err("Failed to update configuration :%d", ret); |
| goto ol_cds_free; |
| } |
| |
| hdd_update_cds_ac_specs_params(hdd_ctx); |
| |
| status = cds_open(hdd_ctx->hdd_psoc); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("Failed to Open CDS: %d", status); |
| goto ol_cds_free; |
| } |
| |
| /* initalize components configurations after psoc open */ |
| ret = hdd_update_components_config(hdd_ctx); |
| if (ret) { |
| hdd_err("Failed to update components configs :%d", |
| ret); |
| goto close; |
| } |
| |
| /* |
| * NAN compoenet requires certian operations like, open adapter, |
| * close adapter, etc. to be initiated by HDD, for those |
| * register HDD callbacks with UMAC's NAN componenet. |
| */ |
| hdd_nan_register_callbacks(hdd_ctx); |
| |
| hdd_ctx->hHal = cds_get_context(QDF_MODULE_ID_SME); |
| |
| status = cds_pre_enable(hdd_ctx->pcds_context); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("Failed to pre-enable CDS: %d", status); |
| goto close; |
| } |
| |
| hdd_register_policy_manager_callback( |
| hdd_ctx->hdd_psoc); |
| |
| hdd_update_hw_sw_info(hdd_ctx); |
| hdd_ctx->driver_status = DRIVER_MODULES_OPENED; |
| |
| if (QDF_GLOBAL_FTM_MODE == hdd_get_conparam()) { |
| sme_register_ftm_msg_processor(hdd_ctx->hHal, |
| hdd_ftm_mc_process_msg); |
| break; |
| } |
| if (unint) { |
| hdd_debug("In phase-1 initialization don't enable modules"); |
| break; |
| } |
| |
| if (reinit) { |
| if (hdd_ipa_uc_ssr_reinit(hdd_ctx)) { |
| hdd_err("HDD IPA UC reinit failed"); |
| goto post_disable; |
| } |
| } |
| |
| /* Fall through dont add break here */ |
| case DRIVER_MODULES_OPENED: |
| if (!adapter) { |
| hdd_alert("adapter is Null"); |
| goto post_disable; |
| } |
| if (QDF_GLOBAL_FTM_MODE == hdd_get_conparam()) { |
| hdd_err("in ftm mode, no need to configure cds modules"); |
| break; |
| } |
| if (hdd_configure_cds(hdd_ctx, adapter)) { |
| hdd_err("Failed to Enable cds modules"); |
| goto post_disable; |
| } |
| hdd_enable_power_management(); |
| hdd_info("Driver Modules Successfully Enabled"); |
| hdd_ctx->driver_status = DRIVER_MODULES_ENABLED; |
| break; |
| case DRIVER_MODULES_ENABLED: |
| hdd_info("Driver modules already Enabled"); |
| break; |
| default: |
| hdd_err("WLAN start invoked in wrong state! :%d\n", |
| hdd_ctx->driver_status); |
| goto release_lock; |
| } |
| hdd_ctx->start_modules_in_progress = false; |
| mutex_unlock(&hdd_ctx->iface_change_lock); |
| EXIT(); |
| return 0; |
| |
| post_disable: |
| cds_post_disable(); |
| |
| close: |
| hdd_ctx->driver_status = DRIVER_MODULES_CLOSED; |
| cds_close(hdd_ctx->hdd_psoc, p_cds_context); |
| |
| ol_cds_free: |
| ol_cds_free(); |
| |
| hif_close: |
| hdd_hif_close(hdd_ctx, p_cds_context->pHIFContext); |
| power_down: |
| if (!reinit && !unint) |
| pld_power_off(qdf_dev->dev); |
| release_lock: |
| hdd_ctx->start_modules_in_progress = false; |
| mutex_unlock(&hdd_ctx->iface_change_lock); |
| EXIT(); |
| |
| return -EINVAL; |
| } |
| |
| #ifdef WIFI_POS_CONVERGED |
| static int hdd_activate_wifi_pos(hdd_context_t *hdd_ctx) |
| { |
| int ret = os_if_wifi_pos_register_nl(); |
| |
| if (ret) |
| hdd_err("os_if_wifi_pos_register_nl failed"); |
| |
| return ret; |
| } |
| |
| static int hdd_deactivate_wifi_pos(void) |
| { |
| int ret = os_if_wifi_pos_deregister_nl(); |
| |
| if (ret) |
| hdd_err("os_if_wifi_pos_deregister_nl failed"); |
| |
| return ret; |
| } |
| |
| /** |
| * hdd_populate_wifi_pos_cfg - populates wifi_pos parameters |
| * @hdd_ctx: hdd context |
| * |
| * Return: status of operation |
| */ |
| static void hdd_populate_wifi_pos_cfg(hdd_context_t *hdd_ctx) |
| { |
| struct wlan_objmgr_psoc *psoc = hdd_ctx->hdd_psoc; |
| struct hdd_config *cfg = hdd_ctx->config; |
| |
| wifi_pos_set_oem_target_type(psoc, hdd_ctx->target_type); |
| wifi_pos_set_oem_fw_version(psoc, hdd_ctx->target_fw_version); |
| wifi_pos_set_drv_ver_major(psoc, QWLAN_VERSION_MAJOR); |
| wifi_pos_set_drv_ver_minor(psoc, QWLAN_VERSION_MINOR); |
| wifi_pos_set_drv_ver_patch(psoc, QWLAN_VERSION_PATCH); |
| wifi_pos_set_drv_ver_build(psoc, QWLAN_VERSION_BUILD); |
| wifi_pos_set_dwell_time_min(psoc, cfg->nNeighborScanMinChanTime); |
| wifi_pos_set_dwell_time_max(psoc, cfg->nNeighborScanMaxChanTime); |
| } |
| #else |
| static int hdd_activate_wifi_pos(hdd_context_t *hdd_ctx) |
| { |
| return oem_activate_service(hdd_ctx); |
| } |
| |
| static int hdd_deactivate_wifi_pos(void) |
| { |
| return 0; |
| } |
| |
| static void hdd_populate_wifi_pos_cfg(hdd_context_t *hdd_ctx) |
| { |
| } |
| #endif |
| |
| /** |
| * __hdd_open() - HDD Open function |
| * @dev: Pointer to net_device structure |
| * |
| * This is called in response to ifconfig up |
| * |
| * Return: 0 for success; non-zero for failure |
| */ |
| static int __hdd_open(struct net_device *dev) |
| { |
| hdd_adapter_t *adapter = WLAN_HDD_GET_PRIV_PTR(dev); |
| hdd_context_t *hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| int ret; |
| |
| ENTER_DEV(dev); |
| MTRACE(qdf_trace(QDF_MODULE_ID_HDD, TRACE_CODE_HDD_OPEN_REQUEST, |
| adapter->sessionId, adapter->device_mode)); |
| |
| ret = wlan_hdd_validate_context(hdd_ctx); |
| if (ret) |
| return ret; |
| |
| |
| ret = hdd_wlan_start_modules(hdd_ctx, adapter, false); |
| if (ret) { |
| hdd_err("Failed to start WLAN modules return"); |
| return -ret; |
| } |
| |
| |
| if (!test_bit(SME_SESSION_OPENED, &adapter->event_flags)) { |
| ret = hdd_start_adapter(adapter); |
| if (ret) { |
| hdd_err("Failed to start adapter :%d", |
| adapter->device_mode); |
| return ret; |
| } |
| } |
| |
| set_bit(DEVICE_IFACE_OPENED, &adapter->event_flags); |
| if (hdd_conn_is_connected(WLAN_HDD_GET_STATION_CTX_PTR(adapter))) { |
| hdd_info("Enabling Tx Queues"); |
| /* Enable TX queues only when we are connected */ |
| wlan_hdd_netif_queue_control(adapter, |
| WLAN_START_ALL_NETIF_QUEUE, |
| WLAN_CONTROL_PATH); |
| } |
| |
| /* Enable carrier and transmit queues for NDI */ |
| if (WLAN_HDD_IS_NDI(adapter)) { |
| hdd_notice("Enabling Tx Queues"); |
| wlan_hdd_netif_queue_control(adapter, |
| WLAN_START_ALL_NETIF_QUEUE_N_CARRIER, |
| WLAN_CONTROL_PATH); |
| } |
| |
| hdd_populate_wifi_pos_cfg(hdd_ctx); |
| |
| return ret; |
| } |
| |
| |
| /** |
| * hdd_open() - Wrapper function for __hdd_open to protect it from SSR |
| * @dev: Pointer to net_device structure |
| * |
| * This is called in response to ifconfig up |
| * |
| * Return: 0 for success; non-zero for failure |
| */ |
| static int hdd_open(struct net_device *dev) |
| { |
| int ret; |
| |
| cds_ssr_protect(__func__); |
| ret = __hdd_open(dev); |
| cds_ssr_unprotect(__func__); |
| |
| return ret; |
| } |
| |
| /** |
| * __hdd_stop() - HDD stop function |
| * @dev: Pointer to net_device structure |
| * |
| * This is called in response to ifconfig down |
| * |
| * Return: 0 for success; non-zero for failure |
| */ |
| static int __hdd_stop(struct net_device *dev) |
| { |
| hdd_adapter_t *adapter = WLAN_HDD_GET_PRIV_PTR(dev); |
| hdd_context_t *hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| int ret; |
| |
| ENTER_DEV(dev); |
| |
| MTRACE(qdf_trace(QDF_MODULE_ID_HDD, TRACE_CODE_HDD_STOP_REQUEST, |
| adapter->sessionId, adapter->device_mode)); |
| |
| ret = wlan_hdd_validate_context(hdd_ctx); |
| if (0 != ret) |
| return ret; |
| |
| /* Nothing to be done if the interface is not opened */ |
| if (false == test_bit(DEVICE_IFACE_OPENED, &adapter->event_flags)) { |
| hdd_err("NETDEV Interface is not OPENED"); |
| return -ENODEV; |
| } |
| |
| /* Make sure the interface is marked as closed */ |
| clear_bit(DEVICE_IFACE_OPENED, &adapter->event_flags); |
| hdd_notice("Disabling OS Tx queues"); |
| |
| /* |
| * Disable TX on the interface, after this hard_start_xmit() will not |
| * be called on that interface |
| */ |
| hdd_notice("Disabling queues"); |
| wlan_hdd_netif_queue_control(adapter, |
| WLAN_STOP_ALL_NETIF_QUEUE_N_CARRIER, |
| WLAN_CONTROL_PATH); |
| |
| /* |
| * NAN data interface is different in some sense. The traffic on NDI is |
| * bursty in nature and depends on the need to transfer. The service |
| * layer may down the interface after the usage and up again when |
| * required. In some sense, the NDI is expected to be available |
| * (like SAP) iface until NDI delete request is issued by the service |
| * layer. Skip BSS termination and adapter deletion for NAN Data |
| * interface (NDI). |
| */ |
| if (WLAN_HDD_IS_NDI(adapter)) |
| return 0; |
| |
| /* |
| * The interface is marked as down for outside world (aka kernel) |
| * But the driver is pretty much alive inside. The driver needs to |
| * tear down the existing connection on the netdev (session) |
| * cleanup the data pipes and wait until the control plane is stabilized |
| * for this interface. The call also needs to wait until the above |
| * mentioned actions are completed before returning to the caller. |
| * Notice that hdd_stop_adapter is requested not to close the session |
| * That is intentional to be able to scan if it is a STA/P2P interface |
| */ |
| hdd_stop_adapter(hdd_ctx, adapter, true); |
| |
| /* DeInit the adapter. This ensures datapath cleanup as well */ |
| hdd_deinit_adapter(hdd_ctx, adapter, true); |
| |
| |
| /* |
| * Find if any iface is up. If any iface is up then can't put device to |
| * sleep/power save mode |
| */ |
| if (hdd_check_for_opened_interfaces(hdd_ctx)) { |
| hdd_debug("Closing all modules from the hdd_stop"); |
| qdf_mc_timer_start(&hdd_ctx->iface_change_timer, |
| hdd_ctx->config->iface_change_wait_time); |
| } |
| |
| EXIT(); |
| return 0; |
| } |
| |
| /** |
| * hdd_stop() - Wrapper function for __hdd_stop to protect it from SSR |
| * @dev: pointer to net_device structure |
| * |
| * This is called in response to ifconfig down |
| * |
| * Return: 0 for success and error number for failure |
| */ |
| static int hdd_stop(struct net_device *dev) |
| { |
| int ret; |
| |
| cds_ssr_protect(__func__); |
| ret = __hdd_stop(dev); |
| cds_ssr_unprotect(__func__); |
| |
| return ret; |
| } |
| |
| /** |
| * __hdd_uninit() - HDD uninit function |
| * @dev: Pointer to net_device structure |
| * |
| * This is called during the netdev unregister to uninitialize all data |
| * associated with the device |
| * |
| * Return: None |
| */ |
| static void __hdd_uninit(struct net_device *dev) |
| { |
| hdd_adapter_t *adapter = WLAN_HDD_GET_PRIV_PTR(dev); |
| |
| ENTER_DEV(dev); |
| |
| do { |
| if (WLAN_HDD_ADAPTER_MAGIC != adapter->magic) { |
| hdd_err("Invalid magic"); |
| break; |
| } |
| |
| if (NULL == adapter->pHddCtx) { |
| hdd_err("NULL hdd_ctx"); |
| break; |
| } |
| |
| if (dev != adapter->dev) |
| hdd_err("Invalid device reference"); |
| |
| hdd_deinit_adapter(adapter->pHddCtx, adapter, true); |
| |
| /* after uninit our adapter structure will no longer be valid */ |
| adapter->dev = NULL; |
| adapter->magic = 0; |
| } while (0); |
| |
| EXIT(); |
| } |
| |
| /** |
| * hdd_uninit() - Wrapper function to protect __hdd_uninit from SSR |
| * @dev: pointer to net_device structure |
| * |
| * This is called during the netdev unregister to uninitialize all data |
| * associated with the device |
| * |
| * Return: none |
| */ |
| static void hdd_uninit(struct net_device *dev) |
| { |
| cds_ssr_protect(__func__); |
| __hdd_uninit(dev); |
| cds_ssr_unprotect(__func__); |
| } |
| |
| static int hdd_open_cesium_nl_sock(void) |
| { |
| #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0)) |
| struct netlink_kernel_cfg cfg = { |
| .groups = WLAN_NLINK_MCAST_GRP_ID, |
| .input = NULL |
| }; |
| #endif |
| int ret = 0; |
| |
| #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 6, 0)) |
| cesium_nl_srv_sock = netlink_kernel_create(&init_net, WLAN_NLINK_CESIUM, |
| #if (LINUX_VERSION_CODE < KERNEL_VERSION(3, 7, 0)) |
| THIS_MODULE, |
| #endif |
| &cfg); |
| #else |
| cesium_nl_srv_sock = netlink_kernel_create(&init_net, WLAN_NLINK_CESIUM, |
| WLAN_NLINK_MCAST_GRP_ID, |
| NULL, NULL, THIS_MODULE); |
| #endif |
| |
| if (cesium_nl_srv_sock == NULL) { |
| hdd_err("NLINK: cesium netlink_kernel_create failed"); |
| ret = -ECONNREFUSED; |
| } |
| |
| return ret; |
| } |
| |
| static void hdd_close_cesium_nl_sock(void) |
| { |
| if (NULL != cesium_nl_srv_sock) { |
| netlink_kernel_release(cesium_nl_srv_sock); |
| cesium_nl_srv_sock = NULL; |
| } |
| } |
| |
| /** |
| * __hdd_set_mac_address() - set the user specified mac address |
| * @dev: Pointer to the net device. |
| * @addr: Pointer to the sockaddr. |
| * |
| * This function sets the user specified mac address using |
| * the command ifconfig wlanX hw ether <mac adress>. |
| * |
| * Return: 0 for success, non zero for failure |
| */ |
| static int __hdd_set_mac_address(struct net_device *dev, void *addr) |
| { |
| hdd_adapter_t *adapter = WLAN_HDD_GET_PRIV_PTR(dev); |
| hdd_context_t *hdd_ctx; |
| struct sockaddr *psta_mac_addr = addr; |
| QDF_STATUS qdf_ret_status = QDF_STATUS_SUCCESS; |
| int ret; |
| |
| ENTER_DEV(dev); |
| |
| hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| ret = wlan_hdd_validate_context(hdd_ctx); |
| if (0 != ret) |
| return ret; |
| |
| memcpy(&adapter->macAddressCurrent, psta_mac_addr->sa_data, ETH_ALEN); |
| memcpy(dev->dev_addr, psta_mac_addr->sa_data, ETH_ALEN); |
| |
| EXIT(); |
| return qdf_ret_status; |
| } |
| |
| /** |
| * hdd_set_mac_address() - Wrapper function to protect __hdd_set_mac_address() |
| * function from SSR |
| * @dev: pointer to net_device structure |
| * @addr: Pointer to the sockaddr |
| * |
| * This function sets the user specified mac address using |
| * the command ifconfig wlanX hw ether <mac adress>. |
| * |
| * Return: 0 for success. |
| */ |
| static int hdd_set_mac_address(struct net_device *dev, void *addr) |
| { |
| int ret; |
| |
| cds_ssr_protect(__func__); |
| ret = __hdd_set_mac_address(dev, addr); |
| cds_ssr_unprotect(__func__); |
| |
| return ret; |
| } |
| |
| uint8_t *wlan_hdd_get_intf_addr(hdd_context_t *hdd_ctx) |
| { |
| int i; |
| |
| for (i = 0; i < QDF_MAX_CONCURRENCY_PERSONA; i++) { |
| if (0 == ((hdd_ctx->config->intfAddrMask) & (1 << i))) |
| break; |
| } |
| |
| if (QDF_MAX_CONCURRENCY_PERSONA == i) |
| return NULL; |
| |
| hdd_ctx->config->intfAddrMask |= (1 << i); |
| return &hdd_ctx->config->intfMacAddr[i].bytes[0]; |
| } |
| |
| void wlan_hdd_release_intf_addr(hdd_context_t *hdd_ctx, uint8_t *releaseAddr) |
| { |
| int i; |
| |
| for (i = 0; i < QDF_MAX_CONCURRENCY_PERSONA; i++) { |
| if (!memcmp(releaseAddr, |
| &hdd_ctx->config->intfMacAddr[i].bytes[0], |
| 6)) { |
| hdd_ctx->config->intfAddrMask &= ~(1 << i); |
| break; |
| } |
| } |
| } |
| |
| #ifdef WLAN_FEATURE_PACKET_FILTERING |
| /** |
| * __hdd_set_multicast_list() - set the multicast address list |
| * @dev: Pointer to the WLAN device. |
| * @skb: Pointer to OS packet (sk_buff). |
| * |
| * This funciton sets the multicast address list. |
| * |
| * Return: None |
| */ |
| static void __hdd_set_multicast_list(struct net_device *dev) |
| { |
| hdd_adapter_t *adapter = WLAN_HDD_GET_PRIV_PTR(dev); |
| int i = 0, status; |
| struct netdev_hw_addr *ha; |
| hdd_context_t *hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| struct pmo_mc_addr_list_params *mc_list_request = NULL; |
| struct wlan_objmgr_psoc *psoc = hdd_ctx->hdd_psoc; |
| int mc_count = 0; |
| |
| ENTER_DEV(dev); |
| if (QDF_GLOBAL_FTM_MODE == hdd_get_conparam()) |
| goto out; |
| |
| status = wlan_hdd_validate_context(hdd_ctx); |
| if (0 != status) |
| goto out; |
| |
| mc_list_request = qdf_mem_malloc(sizeof(*mc_list_request)); |
| if (!mc_list_request) { |
| hdd_err("Cannot allocate mc_list_request"); |
| goto out; |
| } |
| |
| if (dev->flags & IFF_ALLMULTI) { |
| hdd_debug("allow all multicast frames"); |
| hdd_disable_and_flush_mc_addr_list(adapter, |
| pmo_mc_list_change_notify); |
| } else { |
| mc_count = netdev_mc_count(dev); |
| if (mc_count > pmo_ucfg_max_mc_addr_supported(psoc)) { |
| hdd_debug("Exceeded max MC filter addresses (%d). Allowing all MC frames by disabling MC address filtering", |
| pmo_ucfg_max_mc_addr_supported(psoc)); |
| hdd_disable_and_flush_mc_addr_list(adapter, |
| pmo_mc_list_change_notify); |
| goto out; |
| } |
| netdev_for_each_mc_addr(ha, dev) { |
| hdd_debug("ha_addr[%d] "MAC_ADDRESS_STR, |
| i, MAC_ADDR_ARRAY(ha->addr)); |
| if (i == mc_count) |
| break; |
| memset(&(mc_list_request->mc_addr[i].bytes), |
| 0, ETH_ALEN); |
| memcpy(&(mc_list_request->mc_addr[i].bytes), |
| ha->addr, ETH_ALEN); |
| hdd_info("mlist[%d] = %pM", i, |
| mc_list_request->mc_addr[i].bytes); |
| i++; |
| } |
| } |
| |
| mc_list_request->psoc = psoc; |
| mc_list_request->vdev_id = adapter->sessionId; |
| mc_list_request->count = mc_count; |
| status = hdd_cache_mc_addr_list(mc_list_request); |
| if (status == 0) { |
| hdd_enable_mc_addr_filtering(adapter, |
| pmo_mc_list_change_notify); |
| } else { |
| hdd_err("error while caching mc list"); |
| } |
| out: |
| if (mc_list_request) |
| qdf_mem_free(mc_list_request); |
| EXIT(); |
| } |
| |
| |
| /** |
| * hdd_set_multicast_list() - SSR wrapper function for __hdd_set_multicast_list |
| * @dev: pointer to net_device |
| * |
| * Return: none |
| */ |
| static void hdd_set_multicast_list(struct net_device *dev) |
| { |
| cds_ssr_protect(__func__); |
| __hdd_set_multicast_list(dev); |
| cds_ssr_unprotect(__func__); |
| } |
| #endif |
| |
| /** |
| * hdd_select_queue() - used by Linux OS to decide which queue to use first |
| * @dev: Pointer to the WLAN device. |
| * @skb: Pointer to OS packet (sk_buff). |
| * |
| * This function is registered with the Linux OS for network |
| * core to decide which queue to use first. |
| * |
| * Return: ac, Queue Index/access category corresponding to UP in IP header |
| */ |
| static uint16_t hdd_select_queue(struct net_device *dev, struct sk_buff *skb |
| #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 13, 0)) |
| , void *accel_priv |
| #endif |
| #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 14, 0)) |
| , select_queue_fallback_t fallback |
| #endif |
| ) |
| { |
| return hdd_wmm_select_queue(dev, skb); |
| } |
| |
| static const struct net_device_ops wlan_drv_ops = { |
| .ndo_open = hdd_open, |
| .ndo_stop = hdd_stop, |
| .ndo_uninit = hdd_uninit, |
| .ndo_start_xmit = hdd_hard_start_xmit, |
| .ndo_tx_timeout = hdd_tx_timeout, |
| .ndo_get_stats = hdd_get_stats, |
| .ndo_do_ioctl = hdd_ioctl, |
| .ndo_set_mac_address = hdd_set_mac_address, |
| .ndo_select_queue = hdd_select_queue, |
| #ifdef WLAN_FEATURE_PACKET_FILTERING |
| .ndo_set_rx_mode = hdd_set_multicast_list, |
| #endif |
| }; |
| |
| /* Monitor mode net_device_ops, doesnot Tx and most of operations. */ |
| static const struct net_device_ops wlan_mon_drv_ops = { |
| .ndo_open = hdd_mon_open, |
| .ndo_stop = hdd_stop, |
| .ndo_get_stats = hdd_get_stats, |
| }; |
| |
| /** |
| * hdd_set_station_ops() - update net_device ops for monitor mode |
| * @pWlanDev: Handle to struct net_device to be updated. |
| * Return: None |
| */ |
| void hdd_set_station_ops(struct net_device *pWlanDev) |
| { |
| if (QDF_GLOBAL_MONITOR_MODE == cds_get_conparam()) |
| pWlanDev->netdev_ops = &wlan_mon_drv_ops; |
| else |
| pWlanDev->netdev_ops = &wlan_drv_ops; |
| } |
| |
| #ifdef FEATURE_RUNTIME_PM |
| /** |
| * hdd_runtime_suspend_context_init() - API to initialize HDD Runtime Contexts |
| * @hdd_ctx: HDD context |
| * |
| * Return: None |
| */ |
| static void hdd_runtime_suspend_context_init(hdd_context_t *hdd_ctx) |
| { |
| struct hdd_runtime_pm_context *ctx = &hdd_ctx->runtime_context; |
| |
| ctx->roc = qdf_runtime_lock_init("roc"); |
| ctx->dfs = qdf_runtime_lock_init("dfs"); |
| } |
| |
| /** |
| * hdd_runtime_suspend_context_deinit() - API to deinit HDD runtime context |
| * @hdd_ctx: HDD Context |
| * |
| * Return: None |
| */ |
| static void hdd_runtime_suspend_context_deinit(hdd_context_t *hdd_ctx) |
| { |
| struct hdd_runtime_pm_context *ctx = &hdd_ctx->runtime_context; |
| |
| qdf_runtime_lock_deinit(ctx->roc); |
| ctx->roc = NULL; |
| qdf_runtime_lock_deinit(ctx->dfs); |
| ctx->dfs = NULL; |
| } |
| |
| static void hdd_adapter_runtime_suspend_init(hdd_adapter_t *adapter) |
| { |
| struct hdd_connect_pm_context *ctx = &adapter->connect_rpm_ctx; |
| |
| ctx->connect = qdf_runtime_lock_init("connect"); |
| } |
| |
| static void hdd_adapter_runtime_suspend_denit(hdd_adapter_t *adapter) |
| { |
| struct hdd_connect_pm_context *ctx = &adapter->connect_rpm_ctx; |
| |
| qdf_runtime_lock_deinit(ctx->connect); |
| ctx->connect = NULL; |
| } |
| #else /* FEATURE_RUNTIME_PM */ |
| static void hdd_runtime_suspend_context_init(hdd_context_t *hdd_ctx) {} |
| static void hdd_runtime_suspend_context_deinit(hdd_context_t *hdd_ctx) {} |
| static inline void hdd_adapter_runtime_suspend_init(hdd_adapter_t *adapter) {} |
| static inline void hdd_adapter_runtime_suspend_denit(hdd_adapter_t *adapter) {} |
| #endif /* FEATURE_RUNTIME_PM */ |
| /** |
| * hdd_alloc_station_adapter() - allocate the station hdd adapter |
| * @hdd_ctx: global hdd context |
| * @macAddr: mac address to assign to the interface |
| * @name: User-visible name of the interface |
| * |
| * hdd adapter pointer would point to the netdev->priv space, this function |
| * would retrive the pointer, and setup the hdd adapter configuration. |
| * |
| * Return: the pointer to hdd adapter, otherwise NULL |
| */ |
| static hdd_adapter_t *hdd_alloc_station_adapter(hdd_context_t *hdd_ctx, |
| tSirMacAddr macAddr, |
| unsigned char name_assign_type, |
| const char *name) |
| { |
| struct net_device *pWlanDev = NULL; |
| hdd_adapter_t *adapter = NULL; |
| /* |
| * cfg80211 initialization and registration.... |
| */ |
| pWlanDev = alloc_netdev_mq(sizeof(hdd_adapter_t), name, |
| #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 17, 0)) || defined(WITH_BACKPORTS) |
| name_assign_type, |
| #endif |
| (QDF_GLOBAL_MONITOR_MODE == cds_get_conparam() ? |
| hdd_mon_mode_ether_setup : ether_setup), |
| NUM_TX_QUEUES); |
| |
| if (pWlanDev != NULL) { |
| |
| /* Save the pointer to the net_device in the HDD adapter */ |
| adapter = (hdd_adapter_t *) netdev_priv(pWlanDev); |
| |
| qdf_mem_zero(adapter, sizeof(hdd_adapter_t)); |
| |
| adapter->dev = pWlanDev; |
| adapter->pHddCtx = hdd_ctx; |
| adapter->magic = WLAN_HDD_ADAPTER_MAGIC; |
| adapter->sessionId = HDD_SESSION_ID_INVALID; |
| |
| init_completion(&adapter->session_open_comp_var); |
| init_completion(&adapter->session_close_comp_var); |
| init_completion(&adapter->disconnect_comp_var); |
| init_completion(&adapter->linkup_event_var); |
| init_completion(&adapter->cancel_rem_on_chan_var); |
| init_completion(&adapter->rem_on_chan_ready_event); |
| init_completion(&adapter->sta_authorized_event); |
| init_completion(&adapter->offchannel_tx_event); |
| init_completion(&adapter->tx_action_cnf_event); |
| #ifdef FEATURE_WLAN_TDLS |
| init_completion(&adapter->tdls_add_station_comp); |
| init_completion(&adapter->tdls_del_station_comp); |
| init_completion(&adapter->tdls_mgmt_comp); |
| init_completion(&adapter->tdls_link_establish_req_comp); |
| #endif |
| init_completion(&adapter->ibss_peer_info_comp); |
| init_completion(&adapter->change_country_code); |
| |
| |
| init_completion(&adapter->scan_info.abortscan_event_var); |
| init_completion(&adapter->lfr_fw_status.disable_lfr_event); |
| |
| adapter->offloads_configured = false; |
| adapter->isLinkUpSvcNeeded = false; |
| adapter->higherDtimTransition = true; |
| /* Init the net_device structure */ |
| strlcpy(pWlanDev->name, name, IFNAMSIZ); |
| |
| qdf_mem_copy(pWlanDev->dev_addr, (void *)macAddr, |
| sizeof(tSirMacAddr)); |
| qdf_mem_copy(adapter->macAddressCurrent.bytes, macAddr, |
| sizeof(tSirMacAddr)); |
| pWlanDev->watchdog_timeo = HDD_TX_TIMEOUT; |
| |
| if (hdd_ctx->config->enable_ip_tcp_udp_checksum_offload) |
| pWlanDev->features |= |
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; |
| pWlanDev->features |= NETIF_F_RXCSUM; |
| |
| hdd_set_tso_flags(hdd_ctx, pWlanDev); |
| |
| hdd_set_station_ops(adapter->dev); |
| |
| pWlanDev->destructor = free_netdev; |
| pWlanDev->ieee80211_ptr = &adapter->wdev; |
| pWlanDev->tx_queue_len = HDD_NETDEV_TX_QUEUE_LEN; |
| adapter->wdev.wiphy = hdd_ctx->wiphy; |
| adapter->wdev.netdev = pWlanDev; |
| /* set pWlanDev's parent to underlying device */ |
| SET_NETDEV_DEV(pWlanDev, hdd_ctx->parent_dev); |
| hdd_wmm_init(adapter); |
| hdd_adapter_runtime_suspend_init(adapter); |
| spin_lock_init(&adapter->pause_map_lock); |
| adapter->start_time = adapter->last_time = qdf_system_ticks(); |
| } |
| |
| return adapter; |
| } |
| |
| static QDF_STATUS hdd_register_interface(hdd_adapter_t *adapter, |
| bool rtnl_held) |
| { |
| struct net_device *pWlanDev = adapter->dev; |
| |
| if (rtnl_held) { |
| if (strnchr(pWlanDev->name, strlen(pWlanDev->name), '%')) { |
| if (dev_alloc_name(pWlanDev, pWlanDev->name) < 0) { |
| hdd_err("Failed:dev_alloc_name"); |
| return QDF_STATUS_E_FAILURE; |
| } |
| } |
| if (register_netdevice(pWlanDev)) { |
| hdd_err("Failed:register_netdev"); |
| return QDF_STATUS_E_FAILURE; |
| } |
| } else { |
| if (register_netdev(pWlanDev)) { |
| hdd_err("Failed:register_netdev"); |
| return QDF_STATUS_E_FAILURE; |
| } |
| } |
| set_bit(NET_DEVICE_REGISTERED, &adapter->event_flags); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| QDF_STATUS hdd_sme_close_session_callback(void *pContext) |
| { |
| hdd_adapter_t *adapter = pContext; |
| |
| if (NULL == adapter) { |
| hdd_err("NULL adapter"); |
| return QDF_STATUS_E_INVAL; |
| } |
| |
| if (WLAN_HDD_ADAPTER_MAGIC != adapter->magic) { |
| hdd_err("Invalid magic"); |
| return QDF_STATUS_NOT_INITIALIZED; |
| } |
| |
| /* |
| * For NAN Data interface, the close session results in the final |
| * indication to the userspace |
| */ |
| if (adapter->device_mode == QDF_NDI_MODE) |
| hdd_ndp_session_end_handler(adapter); |
| |
| clear_bit(SME_SESSION_OPENED, &adapter->event_flags); |
| |
| /* |
| * We can be blocked while waiting for scheduled work to be |
| * flushed, and the adapter structure can potentially be freed, in |
| * which case the magic will have been reset. So make sure the |
| * magic is still good, and hence the adapter structure is still |
| * valid, before signaling completion |
| */ |
| if (WLAN_HDD_ADAPTER_MAGIC == adapter->magic) |
| complete(&adapter->session_close_comp_var); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * hdd_check_and_init_tdls() - check and init TDLS operation for desired mode |
| * @adapter: pointer to device adapter |
| * |
| * This routine will check the mode of adapter and if it is required then it |
| * will initialize the TDLS operations |
| * |
| * Return: QDF_STATUS |
| */ |
| #ifdef FEATURE_WLAN_TDLS |
| static QDF_STATUS hdd_check_and_init_tdls(hdd_adapter_t *adapter) |
| { |
| if (adapter->device_mode == QDF_IBSS_MODE) |
| return QDF_STATUS_SUCCESS; |
| |
| if (wlan_hdd_tdls_init(adapter)) { |
| hdd_err("wlan_hdd_tdls_init failed"); |
| return QDF_STATUS_E_FAILURE; |
| } |
| set_bit(TDLS_INIT_DONE, &adapter->event_flags); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| #else |
| static QDF_STATUS hdd_check_and_init_tdls(hdd_adapter_t *adapter) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| #endif |
| |
| int hdd_vdev_ready(hdd_adapter_t *adapter) |
| { |
| QDF_STATUS status; |
| |
| status = pmo_vdev_ready(adapter->hdd_vdev); |
| status = ucfg_reg_11d_vdev_created_update(adapter->hdd_vdev); |
| |
| return qdf_status_to_os_return(status); |
| } |
| |
| int hdd_vdev_destroy(hdd_adapter_t *adapter) |
| { |
| QDF_STATUS status; |
| int errno; |
| hdd_context_t *hdd_ctx; |
| unsigned long rc; |
| |
| hdd_info("destroying vdev %d", adapter->sessionId); |
| |
| /* vdev created sanity check */ |
| if (!test_bit(SME_SESSION_OPENED, &adapter->event_flags)) { |
| hdd_err("vdev for Id %d does not exist", adapter->sessionId); |
| return -EINVAL; |
| } |
| status = ucfg_reg_11d_vdev_delete_update(adapter->hdd_vdev); |
| /* do vdev logical destroy via objmgr */ |
| errno = hdd_objmgr_destroy_vdev(adapter); |
| if (errno) { |
| hdd_err("failed to destroy objmgr vdev: %d", errno); |
| return errno; |
| } |
| |
| /* |
| * In SSR case, there is no need to destroy vdev in firmware since |
| * it has already asserted. vdev can be released directly. |
| */ |
| if (cds_is_driver_recovering()) |
| goto release_vdev; |
| |
| /* close sme session (destroy vdev in firmware via legacy API) */ |
| INIT_COMPLETION(adapter->session_close_comp_var); |
| hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| status = sme_close_session(hdd_ctx->hHal, adapter->sessionId, |
| hdd_sme_close_session_callback, adapter); |
| if (QDF_IS_STATUS_ERROR(status)) { |
| hdd_err("failed to close sme session: %d", status); |
| return qdf_status_to_os_return(status); |
| } |
| |
| /* block on a completion variable until sme session is closed */ |
| rc = wait_for_completion_timeout( |
| &adapter->session_close_comp_var, |
| msecs_to_jiffies(WLAN_WAIT_TIME_SESSIONOPENCLOSE)); |
| if (!rc) { |
| hdd_err("timed out waiting for close sme session: %ld", rc); |
| if (adapter->device_mode == QDF_NDI_MODE) |
| hdd_ndp_session_end_handler(adapter); |
| clear_bit(SME_SESSION_OPENED, &adapter->event_flags); |
| return -ETIMEDOUT; |
| } |
| |
| release_vdev: |
| /* now that sme session is closed, allow physical vdev destroy */ |
| errno = hdd_objmgr_release_vdev(adapter); |
| if (errno) { |
| hdd_err("failed to release objmgr vdev: %d", errno); |
| return errno; |
| } |
| |
| hdd_info("vdev destroyed successfully"); |
| |
| return 0; |
| } |
| |
| int hdd_vdev_create(hdd_adapter_t *adapter) |
| { |
| QDF_STATUS status; |
| int errno; |
| hdd_context_t *hdd_ctx; |
| uint32_t type; |
| uint32_t sub_type; |
| unsigned long rc; |
| |
| hdd_info("creating new vdev"); |
| |
| /* determine vdev (sub)type */ |
| status = cds_get_vdev_types(adapter->device_mode, &type, &sub_type); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_err("failed to get vdev type: %d", status); |
| return qdf_status_to_os_return(status); |
| } |
| |
| /* do vdev create via objmgr */ |
| hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| errno = hdd_objmgr_create_and_store_vdev(hdd_ctx->hdd_pdev, adapter); |
| if (errno) { |
| hdd_err("failed to create objmgr vdev: %d", errno); |
| return errno; |
| } |
| |
| /* Open a SME session (prepare vdev in firmware via legacy API) */ |
| INIT_COMPLETION(adapter->session_open_comp_var); |
| status = sme_open_session(hdd_ctx->hHal, hdd_sme_roam_callback, adapter, |
| (uint8_t *)&adapter->macAddressCurrent, |
| adapter->sessionId, type, sub_type); |
| if (QDF_IS_STATUS_ERROR(status)) { |
| hdd_err("failed to open sme session: %d", status); |
| errno = qdf_status_to_os_return(status); |
| goto objmgr_vdev_destroy; |
| } |
| |
| /* block on a completion variable until sme session is opened */ |
| rc = wait_for_completion_timeout( |
| &adapter->session_open_comp_var, |
| msecs_to_jiffies(WLAN_WAIT_TIME_SESSIONOPENCLOSE)); |
| if (!rc) { |
| hdd_err("timed out waiting for open sme session: %ld", rc); |
| errno = -ETIMEDOUT; |
| goto objmgr_vdev_destroy; |
| } |
| |
| /* firmware ready for component communication, raise vdev_ready event */ |
| errno = hdd_vdev_ready(adapter); |
| if (errno) { |
| hdd_err("failed to dispatch vdev ready event: %d", errno); |
| goto hdd_vdev_destroy; |
| } |
| |
| hdd_info("vdev %d created successfully", adapter->sessionId); |
| |
| return 0; |
| |
| /* |
| * Due to legacy constraints, we need to destroy in the same order as |
| * create. So, split error handling into 2 cases to accommodate. |
| */ |
| |
| objmgr_vdev_destroy: |
| QDF_BUG(!hdd_objmgr_release_and_destroy_vdev(adapter)); |
| |
| return errno; |
| |
| hdd_vdev_destroy: |
| QDF_BUG(!hdd_vdev_destroy(adapter)); |
| |
| return errno; |
| } |
| |
| QDF_STATUS hdd_init_station_mode(hdd_adapter_t *adapter) |
| { |
| hdd_station_ctx_t *pHddStaCtx = &adapter->sessionCtx.station; |
| hdd_context_t *hdd_ctx; |
| QDF_STATUS status; |
| int ret_val; |
| |
| ret_val = hdd_vdev_create(adapter); |
| if (ret_val) { |
| hdd_err("failed to create vdev: %d", ret_val); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| sme_set_curr_device_mode(hdd_ctx->hHal, adapter->device_mode); |
| sme_set_pdev_ht_vht_ies(hdd_ctx->hHal, hdd_ctx->config->enable2x2); |
| sme_set_vdev_ies_per_band(hdd_ctx->hHal, adapter->sessionId); |
| |
| /* Register wireless extensions */ |
| status = hdd_register_wext(adapter->dev); |
| if (QDF_IS_STATUS_ERROR(status)) { |
| hdd_err("failed to register wireless extensions: %d", status); |
| goto error_register_wext; |
| } |
| |
| /* Set the Connection State to Not Connected */ |
| hdd_debug("Set HDD connState to eConnectionState_NotConnected"); |
| pHddStaCtx->conn_info.connState = eConnectionState_NotConnected; |
| |
| /* set fast roaming capability in sme session */ |
| status = sme_config_fast_roaming(hdd_ctx->hHal, adapter->sessionId, |
| adapter->fast_roaming_allowed); |
| /* Set the default operation channel */ |
| pHddStaCtx->conn_info.operationChannel = |
| hdd_ctx->config->OperatingChannel; |
| |
| /* Make the default Auth Type as OPEN */ |
| pHddStaCtx->conn_info.authType = eCSR_AUTH_TYPE_OPEN_SYSTEM; |
| |
| status = hdd_init_tx_rx(adapter); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_err("hdd_init_tx_rx() failed, status code %08d [x%08x]", |
| status, status); |
| goto error_init_txrx; |
| } |
| |
| set_bit(INIT_TX_RX_SUCCESS, &adapter->event_flags); |
| |
| status = hdd_wmm_adapter_init(adapter); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_err("hdd_wmm_adapter_init() failed, status code %08d [x%08x]", |
| status, status); |
| goto error_wmm_init; |
| } |
| |
| set_bit(WMM_INIT_DONE, &adapter->event_flags); |
| |
| ret_val = wma_cli_set_command(adapter->sessionId, |
| WMI_PDEV_PARAM_BURST_ENABLE, |
| hdd_ctx->config->enableSifsBurst, |
| PDEV_CMD); |
| if (ret_val) |
| hdd_err("WMI_PDEV_PARAM_BURST_ENABLE set failed %d", ret_val); |
| |
| status = hdd_check_and_init_tdls(adapter); |
| if (status != QDF_STATUS_SUCCESS) |
| goto error_tdls_init; |
| |
| adapter->dev->features |= NETIF_F_LRO; |
| return QDF_STATUS_SUCCESS; |
| |
| error_tdls_init: |
| clear_bit(WMM_INIT_DONE, &adapter->event_flags); |
| hdd_wmm_adapter_close(adapter); |
| error_wmm_init: |
| clear_bit(INIT_TX_RX_SUCCESS, &adapter->event_flags); |
| hdd_deinit_tx_rx(adapter); |
| error_init_txrx: |
| hdd_unregister_wext(adapter->dev); |
| error_register_wext: |
| QDF_BUG(!hdd_vdev_destroy(adapter)); |
| |
| return status; |
| } |
| |
| void hdd_cleanup_actionframe(hdd_context_t *hdd_ctx, hdd_adapter_t *adapter) |
| { |
| hdd_cfg80211_state_t *cfgState; |
| |
| cfgState = WLAN_HDD_GET_CFG_STATE_PTR(adapter); |
| |
| if (NULL != cfgState->buf) { |
| unsigned long rc; |
| |
| rc = wait_for_completion_timeout( |
| &adapter->tx_action_cnf_event, |
| msecs_to_jiffies(ACTION_FRAME_TX_TIMEOUT)); |
| if (!rc) { |
| hdd_err("HDD Wait for Action Confirmation Failed!!"); |
| /* |
| * Inform tx status as FAILURE to upper layer and free |
| * cfgState->buf |
| */ |
| hdd_send_action_cnf(adapter, false); |
| } |
| } |
| } |
| |
| /** |
| * hdd_station_adapter_deinit() - De-initialize the station adapter |
| * @hdd_ctx: global hdd context |
| * @adapter: HDD adapter |
| * @rtnl_held: Used to indicate whether or not the caller is holding |
| * the kernel rtnl_mutex |
| * |
| * This function De-initializes the STA/P2P/OCB adapter. |
| * |
| * Return: None. |
| */ |
| static void hdd_station_adapter_deinit(hdd_context_t *hdd_ctx, |
| hdd_adapter_t *adapter, |
| bool rtnl_held) |
| { |
| ENTER_DEV(adapter->dev); |
| |
| if (adapter->dev) { |
| if (rtnl_held) |
| adapter->dev->wireless_handlers = NULL; |
| else { |
| rtnl_lock(); |
| adapter->dev->wireless_handlers = NULL; |
| rtnl_unlock(); |
| } |
| } |
| |
| if (test_bit(INIT_TX_RX_SUCCESS, &adapter->event_flags)) { |
| hdd_deinit_tx_rx(adapter); |
| clear_bit(INIT_TX_RX_SUCCESS, &adapter->event_flags); |
| } |
| |
| if (test_bit(WMM_INIT_DONE, &adapter->event_flags)) { |
| hdd_wmm_adapter_close(adapter); |
| clear_bit(WMM_INIT_DONE, &adapter->event_flags); |
| } |
| |
| hdd_cleanup_actionframe(hdd_ctx, adapter); |
| wlan_hdd_tdls_exit(adapter); |
| |
| EXIT(); |
| } |
| |
| /** |
| * hdd_ap_adapter_deinit() - De-initialize the ap adapter |
| * @hdd_ctx: global hdd context |
| * @adapter: HDD adapter |
| * @rtnl_held: the rtnl lock hold flag |
| * This function De-initializes the AP/P2PGo adapter. |
| * |
| * Return: None. |
| */ |
| static void hdd_ap_adapter_deinit(hdd_context_t *hdd_ctx, |
| hdd_adapter_t *adapter, |
| bool rtnl_held) |
| { |
| ENTER_DEV(adapter->dev); |
| |
| if (test_bit(WMM_INIT_DONE, &adapter->event_flags)) { |
| hdd_wmm_adapter_close(adapter); |
| clear_bit(WMM_INIT_DONE, &adapter->event_flags); |
| } |
| wlan_hdd_undo_acs(adapter); |
| |
| hdd_cleanup_actionframe(hdd_ctx, adapter); |
| |
| hdd_unregister_hostapd(adapter, rtnl_held); |
| |
| EXIT(); |
| } |
| |
| void hdd_deinit_adapter(hdd_context_t *hdd_ctx, hdd_adapter_t *adapter, |
| bool rtnl_held) |
| { |
| ENTER(); |
| |
| switch (adapter->device_mode) { |
| case QDF_STA_MODE: |
| case QDF_P2P_CLIENT_MODE: |
| case QDF_P2P_DEVICE_MODE: |
| { |
| hdd_station_adapter_deinit(hdd_ctx, adapter, rtnl_held); |
| break; |
| } |
| |
| case QDF_SAP_MODE: |
| case QDF_P2P_GO_MODE: |
| { |
| |
| hdd_ap_adapter_deinit(hdd_ctx, adapter, rtnl_held); |
| break; |
| } |
| |
| default: |
| break; |
| } |
| |
| EXIT(); |
| } |
| |
| static void hdd_cleanup_adapter(hdd_context_t *hdd_ctx, hdd_adapter_t *adapter, |
| bool rtnl_held) |
| { |
| struct net_device *pWlanDev = NULL; |
| |
| if (adapter) |
| pWlanDev = adapter->dev; |
| else { |
| hdd_err("adapter is Null"); |
| return; |
| } |
| |
| hdd_debugfs_exit(adapter); |
| |
| if (adapter->scan_info.default_scan_ies) { |
| qdf_mem_free(adapter->scan_info.default_scan_ies); |
| adapter->scan_info.default_scan_ies = NULL; |
| } |
| |
| hdd_adapter_runtime_suspend_denit(adapter); |
| |
| /* |
| * The adapter is marked as closed. When hdd_wlan_exit() call returns, |
| * the driver is almost closed and cannot handle either control |
| * messages or data. However, unregister_netdevice() call above will |
| * eventually invoke hdd_stop(ndo_close) driver callback, which attempts |
| * to close the active connections(basically excites control path) which |
| * is not right. Setting this flag helps hdd_stop() to recognize that |
| * the interface is closed and restricts any operations on that |
| */ |
| clear_bit(DEVICE_IFACE_OPENED, &adapter->event_flags); |
| |
| if (test_bit(NET_DEVICE_REGISTERED, &adapter->event_flags)) { |
| if (rtnl_held) |
| unregister_netdevice(pWlanDev); |
| else |
| unregister_netdev(pWlanDev); |
| /* |
| * Note that the adapter is no longer valid at this point |
| * since the memory has been reclaimed |
| */ |
| } |
| } |
| |
| static QDF_STATUS hdd_check_for_existing_macaddr(hdd_context_t *hdd_ctx, |
| tSirMacAddr macAddr) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| hdd_adapter_t *adapter; |
| QDF_STATUS status; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| if (adapter |
| && !qdf_mem_cmp(adapter->macAddressCurrent.bytes, |
| macAddr, sizeof(tSirMacAddr))) { |
| return QDF_STATUS_E_FAILURE; |
| } |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| #ifdef CONFIG_FW_LOGS_BASED_ON_INI |
| /** |
| * hdd_set_fw_log_params() - Set log parameters to FW |
| * @hdd_ctx: HDD Context |
| * @adapter: HDD Adapter |
| * |
| * This function set the FW Debug log level based on the INI. |
| * |
| * Return: None |
| */ |
| static void hdd_set_fw_log_params(hdd_context_t *hdd_ctx, |
| hdd_adapter_t *adapter) |
| { |
| uint8_t count = 0, numentries = 0, |
| moduleloglevel[FW_MODULE_LOG_LEVEL_STRING_LENGTH]; |
| uint32_t value = 0; |
| int ret; |
| |
| if (QDF_GLOBAL_FTM_MODE == cds_get_conparam() || |
| (!hdd_ctx->config->enable_fw_log)) { |
| hdd_debug("enable_fw_log not enabled in INI or in FTM mode return"); |
| return; |
| } |
| |
| /* Enable FW logs based on INI configuration */ |
| hdd_ctx->fw_log_settings.dl_type = |
| hdd_ctx->config->enableFwLogType; |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMI_DBGLOG_TYPE, |
| hdd_ctx->config->enableFwLogType, |
| DBG_CMD); |
| if (ret != 0) |
| hdd_err("Failed to enable FW log type ret %d", |
| ret); |
| |
| hdd_ctx->fw_log_settings.dl_loglevel = |
| hdd_ctx->config->enableFwLogLevel; |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMI_DBGLOG_LOG_LEVEL, |
| hdd_ctx->config->enableFwLogLevel, |
| DBG_CMD); |
| if (ret != 0) |
| hdd_err("Failed to enable FW log level ret %d", |
| ret); |
| |
| hdd_string_to_u8_array( |
| hdd_ctx->config->enableFwModuleLogLevel, |
| moduleloglevel, |
| &numentries, |
| FW_MODULE_LOG_LEVEL_STRING_LENGTH); |
| |
| while (count < numentries) { |
| /* |
| * FW module log level input string looks like |
| * below: |
| * gFwDebugModuleLoglevel=<FW Module ID>, |
| * <Log Level>,... |
| * For example: |
| * gFwDebugModuleLoglevel= |
| * 1,0,2,1,3,2,4,3,5,4,6,5,7,6 |
| * Above input string means : |
| * For FW module ID 1 enable log level 0 |
| * For FW module ID 2 enable log level 1 |
| * For FW module ID 3 enable log level 2 |
| * For FW module ID 4 enable log level 3 |
| * For FW module ID 5 enable log level 4 |
| * For FW module ID 6 enable log level 5 |
| * For FW module ID 7 enable log level 6 |
| */ |
| |
| if ((moduleloglevel[count] > WLAN_MODULE_ID_MAX) |
| || (moduleloglevel[count + 1] > DBGLOG_LVL_MAX)) { |
| hdd_err("Module id %d and dbglog level %d input length is more than max", |
| moduleloglevel[count], |
| moduleloglevel[count + 1]); |
| return; |
| } |
| |
| value = moduleloglevel[count] << 16; |
| value |= moduleloglevel[count + 1]; |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMI_DBGLOG_MOD_LOG_LEVEL, |
| value, DBG_CMD); |
| if (ret != 0) |
| hdd_err("Failed to enable FW module log level %d ret %d", |
| value, ret); |
| |
| count += 2; |
| } |
| |
| } |
| #else |
| static void hdd_set_fw_log_params(hdd_context_t *hdd_ctx, |
| hdd_adapter_t *adapter) |
| { |
| } |
| |
| #endif |
| |
| /** |
| * hdd_set_fw_params() - Set parameters to firmware |
| * @adapter: HDD adapter |
| * |
| * This function Sets various parameters to fw once the |
| * adapter is started. |
| * |
| * Return: 0 on success or errno on failure |
| */ |
| int hdd_set_fw_params(hdd_adapter_t *adapter) |
| { |
| int ret; |
| hdd_context_t *hdd_ctx; |
| |
| ENTER_DEV(adapter->dev); |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| if (!hdd_ctx) |
| return -EINVAL; |
| |
| if ((cds_get_conparam() != QDF_GLOBAL_FTM_MODE) && |
| (!hdd_ctx->config->enable2x2)) { |
| #define HDD_DTIM_1CHAIN_RX_ID 0x5 |
| #define HDD_SMPS_PARAM_VALUE_S 29 |
| /* |
| * Disable DTIM 1 chain Rx when in 1x1, |
| * we are passing two value |
| * as param_id << 29 | param_value. |
| * Below param_value = 0(disable) |
| */ |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMI_STA_SMPS_PARAM_CMDID, |
| HDD_DTIM_1CHAIN_RX_ID << |
| HDD_SMPS_PARAM_VALUE_S, |
| VDEV_CMD); |
| if (ret) { |
| hdd_err("DTIM 1 chain set failed %d", ret); |
| goto error; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMI_PDEV_PARAM_TX_CHAIN_MASK, |
| hdd_ctx->config->txchainmask1x1, |
| PDEV_CMD); |
| if (ret) { |
| hdd_err("WMI_PDEV_PARAM_TX_CHAIN_MASK set failed %d", |
| ret); |
| goto error; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMI_PDEV_PARAM_RX_CHAIN_MASK, |
| hdd_ctx->config->rxchainmask1x1, |
| PDEV_CMD); |
| if (ret) { |
| hdd_err("WMI_PDEV_PARAM_RX_CHAIN_MASK set failed %d", |
| ret); |
| goto error; |
| } |
| #undef HDD_DTIM_1CHAIN_RX_ID |
| #undef HDD_SMPS_PARAM_VALUE_S |
| } else { |
| hdd_debug("FTM Mode or 2x2 mode - Do not set 1x1 params"); |
| } |
| |
| if (QDF_GLOBAL_FTM_MODE != cds_get_conparam()) { |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMI_PDEV_PARAM_HYST_EN, |
| hdd_ctx->config->enableMemDeepSleep, |
| PDEV_CMD); |
| |
| if (ret) { |
| hdd_err("WMI_PDEV_PARAM_HYST_EN set failed %d", |
| ret); |
| goto error; |
| } |
| |
| ret = wma_cli_set_command(adapter->sessionId, |
| WMI_VDEV_PARAM_ENABLE_RTSCTS, |
| hdd_ctx->config->rts_profile, |
| VDEV_CMD); |
| if (ret) { |
| hdd_err("FAILED TO SET RTSCTS Profile ret:%d", ret); |
| goto error; |
| } |
| } |
| |
| hdd_set_fw_log_params(hdd_ctx, adapter); |
| |
| EXIT(); |
| return 0; |
| |
| error: |
| return -EINVAL; |
| } |
| |
| /** |
| * hdd_open_adapter() - open and setup the hdd adatper |
| * @hdd_ctx: global hdd context |
| * @session_type: type of the interface to be created |
| * @iface_name: User-visible name of the interface |
| * @macAddr: MAC address to assign to the interface |
| * @name_assign_type: the name of assign type of the netdev |
| * @rtnl_held: the rtnl lock hold flag |
| * |
| * This function open and setup the hdd adpater according to the device |
| * type request, assign the name, the mac address assigned, and then prepared |
| * the hdd related parameters, queue, lock and ready to start. |
| * |
| * Return: the pointer of hdd adapter, otherwise NULL. |
| */ |
| hdd_adapter_t *hdd_open_adapter(hdd_context_t *hdd_ctx, uint8_t session_type, |
| const char *iface_name, tSirMacAddr macAddr, |
| unsigned char name_assign_type, |
| bool rtnl_held) |
| { |
| hdd_adapter_t *adapter = NULL; |
| hdd_adapter_list_node_t *pHddAdapterNode = NULL; |
| QDF_STATUS status = QDF_STATUS_E_FAILURE; |
| hdd_cfg80211_state_t *cfgState; |
| |
| hdd_info("%s interface created. iftype: %d", iface_name, session_type); |
| |
| if (hdd_ctx->current_intf_count >= hdd_ctx->max_intf_count) { |
| /* |
| * Max limit reached on the number of vdevs configured by the |
| * host. Return error |
| */ |
| hdd_err("Unable to add virtual intf: currentVdevCnt=%d,hostConfiguredVdevCnt=%d", |
| hdd_ctx->current_intf_count, hdd_ctx->max_intf_count); |
| return NULL; |
| } |
| |
| if (macAddr == NULL) { |
| /* Not received valid macAddr */ |
| hdd_err("Unable to add virtual intf: Not able to get valid mac address"); |
| return NULL; |
| } |
| status = hdd_check_for_existing_macaddr(hdd_ctx, macAddr); |
| if (QDF_STATUS_E_FAILURE == status) { |
| hdd_err("Duplicate MAC addr: " MAC_ADDRESS_STR |
| " already exists", |
| MAC_ADDR_ARRAY(macAddr)); |
| return NULL; |
| } |
| |
| switch (session_type) { |
| case QDF_STA_MODE: |
| /* Reset locally administered bit if the device mode is STA */ |
| WLAN_HDD_RESET_LOCALLY_ADMINISTERED_BIT(macAddr); |
| /* fall through */ |
| case QDF_P2P_CLIENT_MODE: |
| case QDF_P2P_DEVICE_MODE: |
| case QDF_OCB_MODE: |
| case QDF_NDI_MODE: |
| case QDF_MONITOR_MODE: |
| adapter = hdd_alloc_station_adapter(hdd_ctx, macAddr, |
| name_assign_type, |
| iface_name); |
| |
| if (NULL == adapter) { |
| hdd_err("failed to allocate adapter for session %d", |
| session_type); |
| return NULL; |
| } |
| |
| if (QDF_P2P_CLIENT_MODE == session_type) |
| adapter->wdev.iftype = NL80211_IFTYPE_P2P_CLIENT; |
| else if (QDF_P2P_DEVICE_MODE == session_type) |
| adapter->wdev.iftype = NL80211_IFTYPE_P2P_DEVICE; |
| else if (QDF_MONITOR_MODE == session_type) |
| adapter->wdev.iftype = NL80211_IFTYPE_MONITOR; |
| else |
| adapter->wdev.iftype = NL80211_IFTYPE_STATION; |
| |
| adapter->device_mode = session_type; |
| |
| if (QDF_NDI_MODE == session_type) { |
| status = hdd_init_nan_data_mode(adapter); |
| if (QDF_STATUS_SUCCESS != status) |
| goto err_free_netdev; |
| } |
| |
| /* |
| * Workqueue which gets scheduled in IPv4 notification |
| * callback |
| */ |
| INIT_WORK(&adapter->ipv4NotifierWorkQueue, |
| hdd_ipv4_notifier_work_queue); |
| |
| #ifdef WLAN_NS_OFFLOAD |
| /* |
| * Workqueue which gets scheduled in IPv6 |
| * notification callback. |
| */ |
| INIT_WORK(&adapter->ipv6NotifierWorkQueue, |
| hdd_ipv6_notifier_work_queue); |
| #endif |
| status = hdd_register_interface(adapter, rtnl_held); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_deinit_adapter(hdd_ctx, adapter, rtnl_held); |
| goto err_free_netdev; |
| } |
| |
| /* Stop the Interface TX queue. */ |
| hdd_info("Disabling queues"); |
| wlan_hdd_netif_queue_control(adapter, |
| WLAN_STOP_ALL_NETIF_QUEUE_N_CARRIER, |
| WLAN_CONTROL_PATH); |
| break; |
| |
| |
| case QDF_P2P_GO_MODE: |
| case QDF_SAP_MODE: |
| adapter = hdd_wlan_create_ap_dev(hdd_ctx, macAddr, |
| name_assign_type, |
| (uint8_t *) iface_name); |
| if (NULL == adapter) { |
| hdd_err("failed to allocate adapter for session %d", |
| session_type); |
| return NULL; |
| } |
| |
| adapter->wdev.iftype = |
| (session_type == |
| QDF_SAP_MODE) ? NL80211_IFTYPE_AP : |
| NL80211_IFTYPE_P2P_GO; |
| adapter->device_mode = session_type; |
| |
| status = hdd_register_hostapd(adapter, rtnl_held); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_deinit_adapter(hdd_ctx, adapter, rtnl_held); |
| goto err_free_netdev; |
| } |
| hdd_info("Disabling queues"); |
| wlan_hdd_netif_queue_control(adapter, |
| WLAN_STOP_ALL_NETIF_QUEUE_N_CARRIER, |
| WLAN_CONTROL_PATH); |
| break; |
| case QDF_FTM_MODE: |
| adapter = hdd_alloc_station_adapter(hdd_ctx, macAddr, |
| name_assign_type, |
| "wlan0"); |
| if (NULL == adapter) { |
| hdd_err("Failed to allocate adapter for FTM mode"); |
| return NULL; |
| } |
| adapter->wdev.iftype = NL80211_IFTYPE_STATION; |
| adapter->device_mode = session_type; |
| status = hdd_register_interface(adapter, rtnl_held); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_deinit_adapter(hdd_ctx, adapter, rtnl_held); |
| goto err_free_netdev; |
| } |
| /* Stop the Interface TX queue. */ |
| hdd_info("Disabling queues"); |
| wlan_hdd_netif_queue_control(adapter, |
| WLAN_STOP_ALL_NETIF_QUEUE_N_CARRIER, |
| WLAN_CONTROL_PATH); |
| break; |
| default: |
| hdd_err("Invalid session type %d", session_type); |
| QDF_ASSERT(0); |
| return NULL; |
| } |
| |
| INIT_WORK(&adapter->scan_block_work, wlan_hdd_cfg80211_scan_block_cb); |
| |
| cfgState = WLAN_HDD_GET_CFG_STATE_PTR(adapter); |
| mutex_init(&cfgState->remain_on_chan_ctx_lock); |
| |
| if (QDF_STATUS_SUCCESS == status) { |
| /* Add it to the hdd's session list. */ |
| pHddAdapterNode = |
| qdf_mem_malloc(sizeof(hdd_adapter_list_node_t)); |
| if (NULL == pHddAdapterNode) { |
| status = QDF_STATUS_E_NOMEM; |
| } else { |
| pHddAdapterNode->pAdapter = adapter; |
| status = hdd_add_adapter_back(hdd_ctx, pHddAdapterNode); |
| } |
| } |
| |
| if (QDF_STATUS_SUCCESS != status) { |
| if (NULL != adapter) { |
| hdd_cleanup_adapter(hdd_ctx, adapter, rtnl_held); |
| adapter = NULL; |
| } |
| if (NULL != pHddAdapterNode) |
| qdf_mem_free(pHddAdapterNode); |
| |
| return NULL; |
| } |
| |
| if (QDF_STATUS_SUCCESS == status) { |
| policy_mgr_set_concurrency_mode(hdd_ctx->hdd_psoc, |
| session_type); |
| |
| /* Adapter successfully added. Increment the vdev count */ |
| hdd_ctx->current_intf_count++; |
| |
| hdd_debug("current_intf_count=%d", |
| hdd_ctx->current_intf_count); |
| |
| hdd_check_and_restart_sap_with_non_dfs_acs(); |
| } |
| |
| if (QDF_STATUS_SUCCESS != hdd_debugfs_init(adapter)) |
| hdd_err("Interface %s wow debug_fs init failed", iface_name); |
| |
| return adapter; |
| |
| err_free_netdev: |
| wlan_hdd_release_intf_addr(hdd_ctx, adapter->macAddressCurrent.bytes); |
| free_netdev(adapter->dev); |
| |
| return NULL; |
| } |
| |
| QDF_STATUS hdd_close_adapter(hdd_context_t *hdd_ctx, hdd_adapter_t *adapter, |
| bool rtnl_held) |
| { |
| hdd_adapter_list_node_t *adapterNode, *pCurrent, *pNext; |
| QDF_STATUS status; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &pCurrent); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_warn("adapter list empty %d", |
| status); |
| return status; |
| } |
| |
| while (pCurrent->pAdapter != adapter) { |
| status = hdd_get_next_adapter(hdd_ctx, pCurrent, &pNext); |
| if (QDF_STATUS_SUCCESS != status) |
| break; |
| |
| pCurrent = pNext; |
| } |
| adapterNode = pCurrent; |
| if (QDF_STATUS_SUCCESS == status) { |
| hdd_debug("wait for bus bw work to flush"); |
| hdd_bus_bw_compute_timer_stop(hdd_ctx); |
| cancel_work_sync(&hdd_ctx->bus_bw_work); |
| |
| /* cleanup adapter */ |
| policy_mgr_clear_concurrency_mode(hdd_ctx->hdd_psoc, |
| adapter->device_mode); |
| hdd_cleanup_adapter(hdd_ctx, adapterNode->pAdapter, rtnl_held); |
| hdd_remove_adapter(hdd_ctx, adapterNode); |
| qdf_mem_free(adapterNode); |
| adapterNode = NULL; |
| |
| /* conditionally restart the bw timer */ |
| hdd_bus_bw_compute_timer_try_start(hdd_ctx); |
| |
| /* Adapter removed. Decrement vdev count */ |
| if (hdd_ctx->current_intf_count != 0) |
| hdd_ctx->current_intf_count--; |
| |
| /* Fw will take care incase of concurrency */ |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * hdd_close_all_adapters - Close all open adapters |
| * @hdd_ctx: Hdd context |
| * rtnl_held: True if RTNL lock held |
| * |
| * Close all open adapters. |
| * |
| * Return: QDF status code |
| */ |
| QDF_STATUS hdd_close_all_adapters(hdd_context_t *hdd_ctx, bool rtnl_held) |
| { |
| hdd_adapter_list_node_t *pHddAdapterNode; |
| QDF_STATUS status; |
| |
| ENTER(); |
| |
| do { |
| status = hdd_remove_front_adapter(hdd_ctx, &pHddAdapterNode); |
| if (pHddAdapterNode && QDF_STATUS_SUCCESS == status) { |
| wlan_hdd_release_intf_addr(hdd_ctx, |
| pHddAdapterNode->pAdapter->macAddressCurrent.bytes); |
| hdd_cleanup_adapter(hdd_ctx, pHddAdapterNode->pAdapter, |
| rtnl_held); |
| qdf_mem_free(pHddAdapterNode); |
| /* Adapter removed. Decrement vdev count */ |
| if (hdd_ctx->current_intf_count != 0) |
| hdd_ctx->current_intf_count--; |
| } |
| } while (NULL != pHddAdapterNode && QDF_STATUS_E_EMPTY != status); |
| |
| EXIT(); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| void wlan_hdd_reset_prob_rspies(hdd_adapter_t *pHostapdAdapter) |
| { |
| struct qdf_mac_addr *bssid = NULL; |
| tSirUpdateIE updateIE; |
| |
| switch (pHostapdAdapter->device_mode) { |
| case QDF_STA_MODE: |
| case QDF_P2P_CLIENT_MODE: |
| { |
| hdd_station_ctx_t *pHddStaCtx = |
| WLAN_HDD_GET_STATION_CTX_PTR(pHostapdAdapter); |
| bssid = &pHddStaCtx->conn_info.bssId; |
| break; |
| } |
| case QDF_SAP_MODE: |
| case QDF_P2P_GO_MODE: |
| case QDF_IBSS_MODE: |
| { |
| bssid = &pHostapdAdapter->macAddressCurrent; |
| break; |
| } |
| case QDF_FTM_MODE: |
| case QDF_P2P_DEVICE_MODE: |
| default: |
| /* |
| * wlan_hdd_reset_prob_rspies should not have been called |
| * for these kind of devices |
| */ |
| hdd_err("Unexpected request for the current device type %d", |
| pHostapdAdapter->device_mode); |
| return; |
| } |
| |
| qdf_copy_macaddr(&updateIE.bssid, bssid); |
| updateIE.smeSessionId = pHostapdAdapter->sessionId; |
| updateIE.ieBufferlength = 0; |
| updateIE.pAdditionIEBuffer = NULL; |
| updateIE.append = true; |
| updateIE.notify = false; |
| if (sme_update_add_ie(WLAN_HDD_GET_HAL_CTX(pHostapdAdapter), |
| &updateIE, |
| eUPDATE_IE_PROBE_RESP) == QDF_STATUS_E_FAILURE) { |
| hdd_err("Could not pass on PROBE_RSP_BCN data to PE"); |
| } |
| } |
| |
| QDF_STATUS hdd_stop_adapter(hdd_context_t *hdd_ctx, hdd_adapter_t *adapter, |
| const bool bCloseSession) |
| { |
| QDF_STATUS qdf_ret_status = QDF_STATUS_SUCCESS; |
| hdd_wext_state_t *pWextState = WLAN_HDD_GET_WEXT_STATE_PTR(adapter); |
| union iwreq_data wrqu; |
| tSirUpdateIE updateIE; |
| unsigned long rc; |
| hdd_scaninfo_t *scan_info = NULL; |
| |
| ENTER(); |
| |
| scan_info = &adapter->scan_info; |
| hdd_notice("Disabling queues"); |
| wlan_hdd_netif_queue_control(adapter, |
| WLAN_STOP_ALL_NETIF_QUEUE_N_CARRIER, |
| WLAN_CONTROL_PATH); |
| switch (adapter->device_mode) { |
| case QDF_STA_MODE: |
| case QDF_P2P_CLIENT_MODE: |
| case QDF_IBSS_MODE: |
| case QDF_P2P_DEVICE_MODE: |
| case QDF_NDI_MODE: |
| if ((QDF_NDI_MODE == adapter->device_mode) || |
| hdd_conn_is_connected( |
| WLAN_HDD_GET_STATION_CTX_PTR(adapter)) || |
| hdd_is_connecting( |
| WLAN_HDD_GET_STATION_CTX_PTR(adapter))) { |
| INIT_COMPLETION(adapter->disconnect_comp_var); |
| /* |
| * For NDI do not use pWextState from sta_ctx, if needed |
| * extract from ndi_ctx. |
| */ |
| if (QDF_NDI_MODE == adapter->device_mode) |
| qdf_ret_status = sme_roam_disconnect( |
| hdd_ctx->hHal, |
| adapter->sessionId, |
| eCSR_DISCONNECT_REASON_NDI_DELETE); |
| else if (pWextState->roamProfile.BSSType == |
| eCSR_BSS_TYPE_START_IBSS) |
| qdf_ret_status = sme_roam_disconnect( |
| hdd_ctx->hHal, |
| adapter->sessionId, |
| eCSR_DISCONNECT_REASON_IBSS_LEAVE); |
| else if (QDF_STA_MODE == adapter->device_mode) |
| qdf_ret_status = |
| wlan_hdd_try_disconnect(adapter); |
| else |
| qdf_ret_status = sme_roam_disconnect( |
| hdd_ctx->hHal, |
| adapter->sessionId, |
| eCSR_DISCONNECT_REASON_UNSPECIFIED); |
| /* success implies disconnect command got |
| * queued up successfully |
| */ |
| if (qdf_ret_status == QDF_STATUS_SUCCESS && |
| QDF_STA_MODE != adapter->device_mode) { |
| rc = wait_for_completion_timeout( |
| &adapter->disconnect_comp_var, |
| msecs_to_jiffies |
| (WLAN_WAIT_TIME_DISCONNECT)); |
| if (!rc) |
| hdd_warn("disconn_comp_var wait fail"); |
| } |
| if (qdf_ret_status != QDF_STATUS_SUCCESS) |
| hdd_warn("failed to post disconnect"); |
| memset(&wrqu, '\0', sizeof(wrqu)); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN); |
| wireless_send_event(adapter->dev, SIOCGIWAP, &wrqu, |
| NULL); |
| } |
| if (scan_info != NULL && scan_info->mScanPending) |
| wlan_hdd_scan_abort(adapter); |
| |
| wlan_hdd_cleanup_remain_on_channel_ctx(adapter); |
| |
| #ifdef WLAN_OPEN_SOURCE |
| cancel_work_sync(&adapter->ipv4NotifierWorkQueue); |
| #endif |
| |
| hdd_deregister_tx_flow_control(adapter); |
| |
| #ifdef WLAN_NS_OFFLOAD |
| #ifdef WLAN_OPEN_SOURCE |
| cancel_work_sync(&adapter->ipv6NotifierWorkQueue); |
| #endif |
| #endif |
| |
| /* |
| * It is possible that the caller of this function does not |
| * wish to close the session |
| */ |
| if (true == bCloseSession) { |
| if (0 != wlan_hdd_try_disconnect(adapter)) { |
| hdd_err("Error: Can't disconnect adapter"); |
| return QDF_STATUS_E_FAILURE; |
| } |
| hdd_vdev_destroy(adapter); |
| } |
| break; |
| |
| case QDF_SAP_MODE: |
| case QDF_P2P_GO_MODE: |
| /* Any softap specific cleanup here... */ |
| if (adapter->device_mode == QDF_P2P_GO_MODE) |
| wlan_hdd_cleanup_remain_on_channel_ctx(adapter); |
| |
| hdd_deregister_tx_flow_control(adapter); |
| |
| mutex_lock(&hdd_ctx->sap_lock); |
| if (test_bit(SOFTAP_BSS_STARTED, &adapter->event_flags)) { |
| QDF_STATUS status; |
| QDF_STATUS qdf_status; |
| |
| /* Stop Bss. */ |
| status = wlansap_stop_bss( |
| WLAN_HDD_GET_SAP_CTX_PTR(adapter)); |
| |
| if (QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_hostapd_state_t *hostapd_state = |
| WLAN_HDD_GET_HOSTAP_STATE_PTR(adapter); |
| qdf_event_reset(&hostapd_state-> |
| qdf_stop_bss_event); |
| qdf_status = |
| qdf_wait_single_event(&hostapd_state-> |
| qdf_stop_bss_event, |
| SME_CMD_TIMEOUT_VALUE); |
| |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| hdd_err("failure waiting for wlansap_stop_bss %d", |
| qdf_status); |
| } |
| } else { |
| hdd_err("failure in wlansap_stop_bss"); |
| } |
| clear_bit(SOFTAP_BSS_STARTED, &adapter->event_flags); |
| policy_mgr_decr_session_set_pcl(hdd_ctx->hdd_psoc, |
| adapter->device_mode, |
| adapter->sessionId); |
| |
| qdf_copy_macaddr(&updateIE.bssid, |
| &adapter->macAddressCurrent); |
| updateIE.smeSessionId = adapter->sessionId; |
| updateIE.ieBufferlength = 0; |
| updateIE.pAdditionIEBuffer = NULL; |
| updateIE.append = false; |
| updateIE.notify = false; |
| /* Probe bcn reset */ |
| if (sme_update_add_ie(WLAN_HDD_GET_HAL_CTX(adapter), |
| &updateIE, eUPDATE_IE_PROBE_BCN) |
| == QDF_STATUS_E_FAILURE) { |
| hdd_err("Could not pass on PROBE_RSP_BCN data to PE"); |
| } |
| /* Assoc resp reset */ |
| if (sme_update_add_ie(WLAN_HDD_GET_HAL_CTX(adapter), |
| &updateIE, |
| eUPDATE_IE_ASSOC_RESP) == |
| QDF_STATUS_E_FAILURE) { |
| hdd_err("Could not pass on ASSOC_RSP data to PE"); |
| } |
| /* Reset WNI_CFG_PROBE_RSP Flags */ |
| wlan_hdd_reset_prob_rspies(adapter); |
| qdf_mem_free(adapter->sessionCtx.ap.beacon); |
| adapter->sessionCtx.ap.beacon = NULL; |
| } |
| |
| /* |
| * If Do_Not_Break_Stream was enabled clear avoid channel list. |
| */ |
| if (policy_mgr_is_dnsc_set(adapter->hdd_vdev)) |
| wlan_hdd_send_avoid_freq_for_dnbs(hdd_ctx, 0); |
| |
| if (true == bCloseSession) |
| hdd_vdev_destroy(adapter); |
| mutex_unlock(&hdd_ctx->sap_lock); |
| break; |
| case QDF_OCB_MODE: |
| cdp_clear_peer(cds_get_context(QDF_MODULE_ID_SOC), |
| (struct cdp_pdev *)cds_get_context(QDF_MODULE_ID_TXRX), |
| WLAN_HDD_GET_STATION_CTX_PTR(adapter)->conn_info.staId[0]); |
| break; |
| default: |
| break; |
| } |
| |
| EXIT(); |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * hdd_deinit_all_adapters - deinit all adapters |
| * @hdd_ctx: HDD context |
| * @rtnl_held: True if RTNL lock held |
| * |
| */ |
| void hdd_deinit_all_adapters(hdd_context_t *hdd_ctx, bool rtnl_held) |
| { |
| hdd_adapter_list_node_t *adapter_node = NULL, *next = NULL; |
| QDF_STATUS status; |
| hdd_adapter_t *adapter; |
| |
| ENTER(); |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| |
| while (NULL != adapter_node && QDF_STATUS_SUCCESS == status) { |
| adapter = adapter_node->pAdapter; |
| hdd_deinit_adapter(hdd_ctx, adapter, rtnl_held); |
| status = hdd_get_next_adapter(hdd_ctx, adapter_node, &next); |
| adapter_node = next; |
| } |
| |
| EXIT(); |
| } |
| |
| QDF_STATUS hdd_stop_all_adapters(hdd_context_t *hdd_ctx) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| QDF_STATUS status; |
| hdd_adapter_t *adapter; |
| |
| ENTER(); |
| |
| cds_flush_work(&hdd_ctx->sap_pre_cac_work); |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| hdd_stop_adapter(hdd_ctx, adapter, true); |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| EXIT(); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| QDF_STATUS hdd_reset_all_adapters(hdd_context_t *hdd_ctx) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| QDF_STATUS status; |
| hdd_adapter_t *adapter; |
| hdd_station_ctx_t *pHddStaCtx; |
| struct qdf_mac_addr peerMacAddr; |
| tdlsCtx_t *tdls_ctx; |
| |
| ENTER(); |
| |
| cds_flush_work(&hdd_ctx->sap_pre_cac_work); |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| hdd_notice("Disabling queues for adapter type: %d", |
| adapter->device_mode); |
| |
| if ((adapter->device_mode == QDF_STA_MODE) || |
| (adapter->device_mode == QDF_P2P_CLIENT_MODE)) { |
| /* Stop tdls timers */ |
| tdls_ctx = WLAN_HDD_GET_TDLS_CTX_PTR(adapter); |
| if (tdls_ctx) |
| wlan_hdd_tdls_timers_stop(tdls_ctx); |
| } |
| |
| if (hdd_ctx->config->sap_internal_restart && |
| adapter->device_mode == QDF_SAP_MODE) { |
| wlan_hdd_netif_queue_control(adapter, |
| WLAN_STOP_ALL_NETIF_QUEUE, |
| WLAN_CONTROL_PATH); |
| if (test_bit(SOFTAP_BSS_STARTED, |
| &adapter->event_flags)) { |
| hdd_sap_indicate_disconnect_for_sta(adapter); |
| hdd_cleanup_actionframe(hdd_ctx, adapter); |
| hdd_sap_destroy_events(adapter); |
| } |
| clear_bit(SOFTAP_BSS_STARTED, &adapter->event_flags); |
| } else { |
| wlan_hdd_netif_queue_control(adapter, |
| WLAN_STOP_ALL_NETIF_QUEUE_N_CARRIER, |
| WLAN_CONTROL_PATH); |
| } |
| |
| adapter->sessionCtx.station.hdd_ReassocScenario = false; |
| |
| hdd_deinit_tx_rx(adapter); |
| policy_mgr_decr_session_set_pcl(hdd_ctx->hdd_psoc, |
| adapter->device_mode, adapter->sessionId); |
| if (test_bit(WMM_INIT_DONE, &adapter->event_flags)) { |
| hdd_wmm_adapter_close(adapter); |
| clear_bit(WMM_INIT_DONE, &adapter->event_flags); |
| } |
| |
| /* |
| * If adapter is SAP, set session ID to invalid since SAP |
| * session will be cleanup during SSR. |
| */ |
| if (adapter->device_mode == QDF_SAP_MODE) |
| wlansap_set_invalid_session( |
| WLAN_HDD_GET_SAP_CTX_PTR(adapter)); |
| |
| /* Delete peers if any for STA and P2P client modes */ |
| if (adapter->device_mode == QDF_STA_MODE || |
| adapter->device_mode == QDF_P2P_CLIENT_MODE) { |
| pHddStaCtx = WLAN_HDD_GET_STATION_CTX_PTR(adapter); |
| qdf_copy_macaddr(&peerMacAddr, |
| &pHddStaCtx->conn_info.bssId); |
| |
| hdd_objmgr_remove_peer_object(adapter->hdd_vdev, |
| peerMacAddr.bytes); |
| } |
| |
| /* Destroy vdev which will be recreated during reinit. */ |
| hdd_vdev_destroy(adapter); |
| |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| EXIT(); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| bool hdd_check_for_opened_interfaces(hdd_context_t *hdd_ctx) |
| { |
| hdd_adapter_list_node_t *adapter_node = NULL, *next = NULL; |
| QDF_STATUS status; |
| bool close_modules = true; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| while ((NULL != adapter_node) && (QDF_STATUS_SUCCESS == status)) { |
| if (test_bit(DEVICE_IFACE_OPENED, |
| &adapter_node->pAdapter->event_flags)) { |
| hdd_debug("Still other ifaces are up cannot close modules"); |
| close_modules = false; |
| break; |
| } |
| status = hdd_get_next_adapter(hdd_ctx, adapter_node, &next); |
| adapter_node = next; |
| } |
| |
| return close_modules; |
| } |
| |
| /** |
| * hdd_is_interface_up()- Checkfor interface up before ssr |
| * @hdd_ctx: HDD context |
| * |
| * check if there are any wlan interfaces before SSR accordingly start |
| * the interface. |
| * |
| * Return: 0 if interface was opened else false |
| */ |
| static bool hdd_is_interface_up(hdd_adapter_t *adapter) |
| { |
| if (test_bit(DEVICE_IFACE_OPENED, &adapter->event_flags)) |
| return true; |
| else |
| return false; |
| } |
| |
| #if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0)) \ |
| && !defined(WITH_BACKPORTS) |
| struct cfg80211_bss *hdd_cfg80211_get_bss(struct wiphy *wiphy, |
| struct ieee80211_channel *channel, |
| const u8 *bssid, const u8 *ssid, |
| size_t ssid_len) |
| { |
| return cfg80211_get_bss(wiphy, channel, bssid, |
| ssid, ssid_len, |
| WLAN_CAPABILITY_ESS, |
| WLAN_CAPABILITY_ESS); |
| } |
| #else |
| struct cfg80211_bss *hdd_cfg80211_get_bss(struct wiphy *wiphy, |
| struct ieee80211_channel *channel, |
| const u8 *bssid, const u8 *ssid, |
| size_t ssid_len) |
| { |
| return cfg80211_get_bss(wiphy, channel, bssid, |
| ssid, ssid_len, |
| IEEE80211_BSS_TYPE_ESS, |
| IEEE80211_PRIVACY_ANY); |
| } |
| #endif |
| |
| #if defined CFG80211_CONNECT_BSS |
| #if defined CFG80211_CONNECT_TIMEOUT_REASON_CODE || \ |
| (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0)) |
| /** |
| * hdd_convert_timeout_reason() - Convert to kernel specific enum |
| * @timeout_reason: reason for connect timeout |
| * |
| * This function is used to convert host timeout |
| * reason enum to kernel specific enum. |
| * |
| * Return: nl timeout enum |
| */ |
| static enum nl80211_timeout_reason hdd_convert_timeout_reason( |
| tSirResultCodes timeout_reason) |
| { |
| switch (timeout_reason) { |
| case eSIR_SME_JOIN_TIMEOUT_RESULT_CODE: |
| return NL80211_TIMEOUT_SCAN; |
| case eSIR_SME_AUTH_TIMEOUT_RESULT_CODE: |
| return NL80211_TIMEOUT_AUTH; |
| case eSIR_SME_ASSOC_TIMEOUT_RESULT_CODE: |
| return NL80211_TIMEOUT_ASSOC; |
| default: |
| return NL80211_TIMEOUT_UNSPECIFIED; |
| } |
| } |
| |
| /** |
| * hdd_cfg80211_connect_timeout() - API to send connection timeout reason |
| * @dev: network device |
| * @bssid: bssid to which we want to associate |
| * @timeout_reason: reason for connect timeout |
| * |
| * This API is used to send connection timeout reason to supplicant |
| * |
| * Return: void |
| */ |
| static void hdd_cfg80211_connect_timeout(struct net_device *dev, |
| const u8 *bssid, |
| tSirResultCodes timeout_reason) |
| { |
| enum nl80211_timeout_reason nl_timeout_reason; |
| |
| nl_timeout_reason = hdd_convert_timeout_reason(timeout_reason); |
| |
| cfg80211_connect_timeout(dev, bssid, NULL, 0, GFP_KERNEL, |
| nl_timeout_reason); |
| } |
| |
| /** |
| * __hdd_connect_bss() - API to send connection status to supplicant |
| * @dev: network device |
| * @bssid: bssid to which we want to associate |
| * @req_ie: Request Information Element |
| * @req_ie_len: len of the req IE |
| * @resp_ie: Response IE |
| * @resp_ie_len: len of ht response IE |
| * @status: status |
| * @gfp: Kernel Flag |
| * @timeout_reason: reason for connect timeout |
| * |
| * Return: void |
| */ |
| static void __hdd_connect_bss(struct net_device *dev, const u8 *bssid, |
| struct cfg80211_bss *bss, const u8 *req_ie, |
| size_t req_ie_len, const u8 *resp_ie, |
| size_t resp_ie_len, int status, gfp_t gfp, |
| tSirResultCodes timeout_reason) |
| { |
| enum nl80211_timeout_reason nl_timeout_reason; |
| |
| nl_timeout_reason = hdd_convert_timeout_reason(timeout_reason); |
| |
| cfg80211_connect_bss(dev, bssid, bss, req_ie, req_ie_len, |
| resp_ie, resp_ie_len, status, gfp, |
| nl_timeout_reason); |
| } |
| #else |
| #if defined CFG80211_CONNECT_TIMEOUT |
| static void hdd_cfg80211_connect_timeout(struct net_device *dev, |
| const u8 *bssid, |
| tSirResultCodes timeout_reason) |
| { |
| cfg80211_connect_timeout(dev, bssid, NULL, 0, GFP_KERNEL); |
| } |
| #endif |
| |
| static void __hdd_connect_bss(struct net_device *dev, const u8 *bssid, |
| struct cfg80211_bss *bss, const u8 *req_ie, |
| size_t req_ie_len, const u8 *resp_ie, |
| size_t resp_ie_len, int status, gfp_t gfp, |
| tSirResultCodes timeout_reason) |
| { |
| cfg80211_connect_bss(dev, bssid, bss, req_ie, req_ie_len, |
| resp_ie, resp_ie_len, status, gfp); |
| } |
| #endif |
| |
| /** |
| * hdd_connect_bss() - API to send connection status to supplicant |
| * @dev: network device |
| * @bssid: bssid to which we want to associate |
| * @req_ie: Request Information Element |
| * @req_ie_len: len of the req IE |
| * @resp_ie: Response IE |
| * @resp_ie_len: len of ht response IE |
| * @status: status |
| * @gfp: Kernel Flag |
| * @connect_timeout: If timed out waiting for Auth/Assoc/Probe resp |
| * @timeout_reason: reason for connect timeout |
| * |
| * The API is a wrapper to send connection status to supplicant |
| * |
| * Return: Void |
| */ |
| #if defined CFG80211_CONNECT_TIMEOUT |
| static void hdd_connect_bss(struct net_device *dev, const u8 *bssid, |
| struct cfg80211_bss *bss, const u8 *req_ie, |
| size_t req_ie_len, const u8 *resp_ie, |
| size_t resp_ie_len, int status, gfp_t gfp, |
| bool connect_timeout, |
| tSirResultCodes timeout_reason) |
| { |
| if (connect_timeout) |
| hdd_cfg80211_connect_timeout(dev, bssid, timeout_reason); |
| else |
| __hdd_connect_bss(dev, bssid, bss, req_ie, req_ie_len, resp_ie, |
| resp_ie_len, status, gfp, timeout_reason); |
| } |
| #else |
| static void hdd_connect_bss(struct net_device *dev, const u8 *bssid, |
| struct cfg80211_bss *bss, const u8 *req_ie, |
| size_t req_ie_len, const u8 *resp_ie, |
| size_t resp_ie_len, int status, gfp_t gfp, |
| bool connect_timeout, |
| tSirResultCodes timeout_reason) |
| { |
| __hdd_connect_bss(dev, bssid, bss, req_ie, req_ie_len, resp_ie, |
| resp_ie_len, status, gfp, timeout_reason); |
| } |
| #endif |
| |
| /** |
| * hdd_connect_result() - API to send connection status to supplicant |
| * @dev: network device |
| * @bssid: bssid to which we want to associate |
| * @roam_info: information about connected bss |
| * @req_ie: Request Information Element |
| * @req_ie_len: len of the req IE |
| * @resp_ie: Response IE |
| * @resp_ie_len: len of ht response IE |
| * @status: status |
| * @gfp: Kernel Flag |
| * @connect_timeout: If timed out waiting for Auth/Assoc/Probe resp |
| * @timeout_reason: reason for connect timeout |
| * |
| * The API is a wrapper to send connection status to supplicant |
| * and allow runtime suspend |
| * |
| * Return: Void |
| */ |
| void hdd_connect_result(struct net_device *dev, const u8 *bssid, |
| tCsrRoamInfo *roam_info, const u8 *req_ie, |
| size_t req_ie_len, const u8 *resp_ie, |
| size_t resp_ie_len, u16 status, gfp_t gfp, |
| bool connect_timeout, |
| tSirResultCodes timeout_reason) |
| { |
| hdd_adapter_t *padapter = (hdd_adapter_t *) netdev_priv(dev); |
| struct cfg80211_bss *bss = NULL; |
| |
| if (WLAN_STATUS_SUCCESS == status) { |
| struct ieee80211_channel *chan; |
| int freq; |
| int chan_no = roam_info->pBssDesc->channelId; |
| |
| if (chan_no <= 14) |
| freq = ieee80211_channel_to_frequency(chan_no, |
| NL80211_BAND_2GHZ); |
| else |
| freq = ieee80211_channel_to_frequency(chan_no, |
| NL80211_BAND_5GHZ); |
| |
| chan = ieee80211_get_channel(padapter->wdev.wiphy, freq); |
| bss = hdd_cfg80211_get_bss(padapter->wdev.wiphy, chan, bssid, |
| roam_info->u.pConnectedProfile->SSID.ssId, |
| roam_info->u.pConnectedProfile->SSID.length); |
| } |
| |
| hdd_connect_bss(dev, bssid, bss, req_ie, |
| req_ie_len, resp_ie, resp_ie_len, |
| status, gfp, connect_timeout, timeout_reason); |
| |
| qdf_runtime_pm_allow_suspend(padapter->connect_rpm_ctx.connect); |
| hdd_allow_suspend(WIFI_POWER_EVENT_WAKELOCK_CONNECT); |
| } |
| #else |
| void hdd_connect_result(struct net_device *dev, const u8 *bssid, |
| tCsrRoamInfo *roam_info, const u8 *req_ie, |
| size_t req_ie_len, const u8 *resp_ie, |
| size_t resp_ie_len, u16 status, gfp_t gfp, |
| bool connect_timeout, |
| tSirResultCodes timeout_reason) |
| { |
| hdd_adapter_t *padapter = (hdd_adapter_t *) netdev_priv(dev); |
| |
| cfg80211_connect_result(dev, bssid, req_ie, req_ie_len, |
| resp_ie, resp_ie_len, status, gfp); |
| qdf_runtime_pm_allow_suspend(padapter->connect_rpm_ctx.connect); |
| hdd_allow_suspend(WIFI_POWER_EVENT_WAKELOCK_CONNECT); |
| } |
| #endif |
| |
| |
| QDF_STATUS hdd_start_all_adapters(hdd_context_t *hdd_ctx) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| QDF_STATUS status; |
| hdd_adapter_t *adapter; |
| #ifndef MSM_PLATFORM |
| struct qdf_mac_addr bcastMac = QDF_MAC_ADDR_BROADCAST_INITIALIZER; |
| #endif |
| eConnectionState connState; |
| |
| ENTER(); |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| |
| if (!hdd_is_interface_up(adapter)) |
| goto get_adapter; |
| |
| hdd_wmm_init(adapter); |
| |
| switch (adapter->device_mode) { |
| case QDF_STA_MODE: |
| case QDF_P2P_CLIENT_MODE: |
| case QDF_P2P_DEVICE_MODE: |
| |
| connState = (WLAN_HDD_GET_STATION_CTX_PTR(adapter)) |
| ->conn_info.connState; |
| |
| hdd_init_station_mode(adapter); |
| /* Open the gates for HDD to receive Wext commands */ |
| adapter->isLinkUpSvcNeeded = false; |
| adapter->scan_info.mScanPending = false; |
| |
| /* Indicate disconnect event to supplicant |
| * if associated previously |
| */ |
| if (eConnectionState_Associated == connState || |
| eConnectionState_IbssConnected == connState || |
| eConnectionState_NotConnected == connState || |
| eConnectionState_IbssDisconnected == connState || |
| eConnectionState_Disconnecting == connState) { |
| union iwreq_data wrqu; |
| |
| memset(&wrqu, '\0', sizeof(wrqu)); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN); |
| wireless_send_event(adapter->dev, SIOCGIWAP, |
| &wrqu, NULL); |
| adapter->sessionCtx.station. |
| hdd_ReassocScenario = false; |
| |
| /* indicate disconnected event to nl80211 */ |
| wlan_hdd_cfg80211_indicate_disconnect( |
| adapter->dev, false, |
| WLAN_REASON_UNSPECIFIED); |
| } else if (eConnectionState_Connecting == connState) { |
| /* |
| * Indicate connect failure to supplicant if we |
| * were in the process of connecting |
| */ |
| hdd_connect_result(adapter->dev, NULL, NULL, |
| NULL, 0, NULL, 0, |
| WLAN_STATUS_ASSOC_DENIED_UNSPEC, |
| GFP_KERNEL, false, 0); |
| } |
| |
| hdd_register_tx_flow_control(adapter, |
| hdd_tx_resume_timer_expired_handler, |
| hdd_tx_resume_cb); |
| |
| break; |
| |
| case QDF_SAP_MODE: |
| if (hdd_ctx->config->sap_internal_restart) |
| hdd_init_ap_mode(adapter, true); |
| |
| break; |
| |
| case QDF_P2P_GO_MODE: |
| #ifdef MSM_PLATFORM |
| hdd_debug("[SSR] send stop ap to supplicant"); |
| cfg80211_ap_stopped(adapter->dev, GFP_KERNEL); |
| #else |
| hdd_debug("[SSR] send restart supplicant"); |
| /* event supplicant to restart */ |
| cfg80211_del_sta(adapter->dev, |
| (const u8 *)&bcastMac.bytes[0], |
| GFP_KERNEL); |
| #endif |
| break; |
| |
| default: |
| break; |
| } |
| get_adapter: |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| EXIT(); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| QDF_STATUS hdd_get_front_adapter(hdd_context_t *hdd_ctx, |
| hdd_adapter_list_node_t **padapterNode) |
| { |
| QDF_STATUS status; |
| |
| qdf_spin_lock_bh(&hdd_ctx->hdd_adapter_lock); |
| status = qdf_list_peek_front(&hdd_ctx->hddAdapters, |
| (qdf_list_node_t **) padapterNode); |
| qdf_spin_unlock_bh(&hdd_ctx->hdd_adapter_lock); |
| return status; |
| } |
| |
| QDF_STATUS hdd_get_next_adapter(hdd_context_t *hdd_ctx, |
| hdd_adapter_list_node_t *adapterNode, |
| hdd_adapter_list_node_t **pNextAdapterNode) |
| { |
| QDF_STATUS status; |
| |
| qdf_spin_lock_bh(&hdd_ctx->hdd_adapter_lock); |
| status = qdf_list_peek_next(&hdd_ctx->hddAdapters, |
| (qdf_list_node_t *) adapterNode, |
| (qdf_list_node_t **) pNextAdapterNode); |
| |
| qdf_spin_unlock_bh(&hdd_ctx->hdd_adapter_lock); |
| return status; |
| } |
| |
| QDF_STATUS hdd_remove_adapter(hdd_context_t *hdd_ctx, |
| hdd_adapter_list_node_t *adapterNode) |
| { |
| QDF_STATUS status; |
| |
| qdf_spin_lock_bh(&hdd_ctx->hdd_adapter_lock); |
| status = qdf_list_remove_node(&hdd_ctx->hddAdapters, |
| &adapterNode->node); |
| qdf_spin_unlock_bh(&hdd_ctx->hdd_adapter_lock); |
| return status; |
| } |
| |
| QDF_STATUS hdd_remove_front_adapter(hdd_context_t *hdd_ctx, |
| hdd_adapter_list_node_t **padapterNode) |
| { |
| QDF_STATUS status; |
| |
| qdf_spin_lock_bh(&hdd_ctx->hdd_adapter_lock); |
| status = qdf_list_remove_front(&hdd_ctx->hddAdapters, |
| (qdf_list_node_t **) padapterNode); |
| qdf_spin_unlock_bh(&hdd_ctx->hdd_adapter_lock); |
| return status; |
| } |
| |
| QDF_STATUS hdd_add_adapter_back(hdd_context_t *hdd_ctx, |
| hdd_adapter_list_node_t *adapterNode) |
| { |
| QDF_STATUS status; |
| |
| qdf_spin_lock_bh(&hdd_ctx->hdd_adapter_lock); |
| status = qdf_list_insert_back(&hdd_ctx->hddAdapters, |
| (qdf_list_node_t *) adapterNode); |
| qdf_spin_unlock_bh(&hdd_ctx->hdd_adapter_lock); |
| return status; |
| } |
| |
| QDF_STATUS hdd_add_adapter_front(hdd_context_t *hdd_ctx, |
| hdd_adapter_list_node_t *adapterNode) |
| { |
| QDF_STATUS status; |
| |
| qdf_spin_lock_bh(&hdd_ctx->hdd_adapter_lock); |
| status = qdf_list_insert_front(&hdd_ctx->hddAdapters, |
| (qdf_list_node_t *) adapterNode); |
| qdf_spin_unlock_bh(&hdd_ctx->hdd_adapter_lock); |
| return status; |
| } |
| |
| hdd_adapter_t *hdd_get_adapter_by_macaddr(hdd_context_t *hdd_ctx, |
| tSirMacAddr macAddr) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| hdd_adapter_t *adapter; |
| QDF_STATUS status; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| |
| if (adapter |
| && !qdf_mem_cmp(adapter->macAddressCurrent.bytes, |
| macAddr, sizeof(tSirMacAddr))) |
| return adapter; |
| |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| return NULL; |
| |
| } |
| |
| hdd_adapter_t *hdd_get_adapter_by_vdev(hdd_context_t *hdd_ctx, |
| uint32_t vdev_id) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| hdd_adapter_t *adapter; |
| QDF_STATUS qdf_status; |
| |
| qdf_status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while ((NULL != adapterNode) && (QDF_STATUS_SUCCESS == qdf_status)) { |
| adapter = adapterNode->pAdapter; |
| |
| if (adapter->sessionId == vdev_id) |
| return adapter; |
| |
| qdf_status = |
| hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| hdd_err("vdev_id %d does not exist with host", vdev_id); |
| |
| return NULL; |
| } |
| |
| /** |
| * hdd_get_adapter_by_sme_session_id() - Return adapter with |
| * the sessionid |
| * @hdd_ctx: hdd context. |
| * @sme_session_id: sme session is for the adapter to get. |
| * |
| * This function is used to get the adapter with provided session id |
| * |
| * Return: adapter pointer if found |
| * |
| */ |
| hdd_adapter_t *hdd_get_adapter_by_sme_session_id(hdd_context_t *hdd_ctx, |
| uint32_t sme_session_id) |
| { |
| hdd_adapter_list_node_t *adapter_node = NULL, *next = NULL; |
| hdd_adapter_t *adapter; |
| QDF_STATUS qdf_status; |
| |
| |
| qdf_status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| |
| while ((NULL != adapter_node) && |
| (QDF_STATUS_SUCCESS == qdf_status)) { |
| adapter = adapter_node->pAdapter; |
| |
| if (adapter && |
| adapter->sessionId == sme_session_id) |
| return adapter; |
| |
| qdf_status = |
| hdd_get_next_adapter(hdd_ctx, |
| adapter_node, &next); |
| adapter_node = next; |
| } |
| return NULL; |
| } |
| |
| hdd_adapter_t *hdd_get_adapter_by_iface_name(hdd_context_t *hdd_ctx, |
| const char *iface_name) |
| { |
| hdd_adapter_list_node_t *adapter_node = NULL, *next = NULL; |
| hdd_adapter_t *adapter; |
| QDF_STATUS qdf_status; |
| |
| qdf_status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| |
| while ((NULL != adapter_node) && |
| (QDF_STATUS_SUCCESS == qdf_status)) { |
| adapter = adapter_node->pAdapter; |
| |
| if (adapter && |
| !qdf_str_cmp(adapter->dev->name, iface_name)) |
| return adapter; |
| |
| qdf_status = |
| hdd_get_next_adapter(hdd_ctx, |
| adapter_node, &next); |
| adapter_node = next; |
| } |
| return NULL; |
| } |
| |
| /** |
| * hdd_get_adapter() - to get adapter matching the mode |
| * @hdd_ctx: hdd context |
| * @mode: adapter mode |
| * |
| * This routine will return the pointer to adapter matching |
| * with the passed mode. |
| * |
| * Return: pointer to adapter or null |
| */ |
| hdd_adapter_t *hdd_get_adapter(hdd_context_t *hdd_ctx, |
| enum tQDF_ADAPTER_MODE mode) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| hdd_adapter_t *adapter; |
| QDF_STATUS status; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| |
| if (adapter && (mode == adapter->device_mode)) |
| return adapter; |
| |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| return NULL; |
| |
| } |
| |
| /** |
| * hdd_get_operating_channel() - return operating channel of the device mode |
| * @hdd_ctx: Pointer to the HDD context. |
| * @mode: Device mode for which operating channel is required. |
| * Suported modes: |
| * QDF_STA_MODE, |
| * QDF_P2P_CLIENT_MODE, |
| * QDF_SAP_MODE, |
| * QDF_P2P_GO_MODE. |
| * |
| * This API returns the operating channel of the requested device mode |
| * |
| * Return: channel number. "0" id the requested device is not found OR it is |
| * not connected. |
| */ |
| uint8_t hdd_get_operating_channel(hdd_context_t *hdd_ctx, |
| enum tQDF_ADAPTER_MODE mode) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| QDF_STATUS status; |
| hdd_adapter_t *adapter; |
| uint8_t operatingChannel = 0; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| |
| if (mode == adapter->device_mode) { |
| switch (adapter->device_mode) { |
| case QDF_STA_MODE: |
| case QDF_P2P_CLIENT_MODE: |
| if (hdd_conn_is_connected |
| (WLAN_HDD_GET_STATION_CTX_PTR |
| (adapter))) { |
| operatingChannel = |
| (WLAN_HDD_GET_STATION_CTX_PTR |
| (adapter))->conn_info. |
| operationChannel; |
| } |
| break; |
| case QDF_SAP_MODE: |
| case QDF_P2P_GO_MODE: |
| /* softap connection info */ |
| if (test_bit |
| (SOFTAP_BSS_STARTED, |
| &adapter->event_flags)) |
| operatingChannel = |
| (WLAN_HDD_GET_AP_CTX_PTR |
| (adapter))->operatingChannel; |
| break; |
| default: |
| break; |
| } |
| |
| /* Found the device of interest. break the loop */ |
| break; |
| } |
| |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| return operatingChannel; |
| } |
| |
| static inline QDF_STATUS hdd_unregister_wext_all_adapters(hdd_context_t * |
| hdd_ctx) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| QDF_STATUS status; |
| hdd_adapter_t *adapter; |
| |
| ENTER(); |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| if ((adapter->device_mode == QDF_STA_MODE) || |
| (adapter->device_mode == QDF_P2P_CLIENT_MODE) || |
| (adapter->device_mode == QDF_IBSS_MODE) || |
| (adapter->device_mode == QDF_P2P_DEVICE_MODE) || |
| (adapter->device_mode == QDF_SAP_MODE) || |
| (adapter->device_mode == QDF_P2P_GO_MODE)) { |
| wlan_hdd_cfg80211_deregister_frames(adapter); |
| hdd_unregister_wext(adapter->dev); |
| } |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| EXIT(); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| QDF_STATUS hdd_abort_mac_scan_all_adapters(hdd_context_t *hdd_ctx) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| QDF_STATUS status; |
| hdd_adapter_t *adapter; |
| |
| ENTER(); |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| if ((adapter->device_mode == QDF_STA_MODE) || |
| (adapter->device_mode == QDF_P2P_CLIENT_MODE) || |
| (adapter->device_mode == QDF_IBSS_MODE) || |
| (adapter->device_mode == QDF_P2P_DEVICE_MODE) || |
| (adapter->device_mode == QDF_SAP_MODE) || |
| (adapter->device_mode == QDF_P2P_GO_MODE)) { |
| wlan_abort_scan(hdd_ctx->hdd_pdev, INVAL_PDEV_ID, |
| adapter->sessionId, INVALID_SCAN_ID, false); |
| } |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| EXIT(); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * hdd_abort_sched_scan_all_adapters() - stops scheduled (PNO) scans for all |
| * adapters |
| * @hdd_ctx: The HDD context containing the adapters to operate on |
| * |
| * return: QDF_STATUS_SUCCESS |
| */ |
| static QDF_STATUS hdd_abort_sched_scan_all_adapters(hdd_context_t *hdd_ctx) |
| { |
| hdd_adapter_list_node_t *adapter_node = NULL, *next_node = NULL; |
| QDF_STATUS status; |
| hdd_adapter_t *adapter; |
| int err; |
| |
| ENTER(); |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| |
| while (NULL != adapter_node && QDF_STATUS_SUCCESS == status) { |
| adapter = adapter_node->pAdapter; |
| if ((adapter->device_mode == QDF_STA_MODE) || |
| (adapter->device_mode == QDF_P2P_CLIENT_MODE) || |
| (adapter->device_mode == QDF_IBSS_MODE) || |
| (adapter->device_mode == QDF_P2P_DEVICE_MODE) || |
| (adapter->device_mode == QDF_SAP_MODE) || |
| (adapter->device_mode == QDF_P2P_GO_MODE)) { |
| err = wlan_hdd_sched_scan_stop(adapter->dev); |
| if (err) |
| hdd_err("Unable to stop scheduled scan"); |
| } |
| status = hdd_get_next_adapter(hdd_ctx, adapter_node, |
| &next_node); |
| adapter_node = next_node; |
| } |
| |
| EXIT(); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| #ifdef WLAN_NS_OFFLOAD |
| /** |
| * hdd_wlan_unregister_ip6_notifier() - unregister IPv6 change notifier |
| * @hdd_ctx: Pointer to hdd context |
| * |
| * Unregister for IPv6 address change notifications. |
| * |
| * Return: None |
| */ |
| static void hdd_wlan_unregister_ip6_notifier(hdd_context_t *hdd_ctx) |
| { |
| unregister_inet6addr_notifier(&hdd_ctx->ipv6_notifier); |
| } |
| |
| /** |
| * hdd_wlan_register_ip6_notifier() - register IPv6 change notifier |
| * @hdd_ctx: Pointer to hdd context |
| * |
| * Register for IPv6 address change notifications. |
| * |
| * Return: 0 on success and errno on failure. |
| */ |
| static int hdd_wlan_register_ip6_notifier(hdd_context_t *hdd_ctx) |
| { |
| int ret; |
| |
| hdd_ctx->ipv6_notifier.notifier_call = wlan_hdd_ipv6_changed; |
| ret = register_inet6addr_notifier(&hdd_ctx->ipv6_notifier); |
| if (ret) { |
| hdd_err("Failed to register IPv6 notifier: %d", ret); |
| goto out; |
| } |
| |
| hdd_debug("Registered IPv6 notifier"); |
| out: |
| return ret; |
| } |
| #else |
| /** |
| * hdd_wlan_unregister_ip6_notifier() - unregister IPv6 change notifier |
| * @hdd_ctx: Pointer to hdd context |
| * |
| * Unregister for IPv6 address change notifications. |
| * |
| * Return: None |
| */ |
| static void hdd_wlan_unregister_ip6_notifier(hdd_context_t *hdd_ctx) |
| { |
| } |
| |
| /** |
| * hdd_wlan_register_ip6_notifier() - register IPv6 change notifier |
| * @hdd_ctx: Pointer to hdd context |
| * |
| * Register for IPv6 address change notifications. |
| * |
| * Return: None |
| */ |
| static int hdd_wlan_register_ip6_notifier(hdd_context_t *hdd_ctx) |
| { |
| return 0; |
| } |
| #endif |
| |
| #ifdef WLAN_LOGGING_SOCK_SVC_ENABLE |
| /** |
| * hdd_logging_sock_activate_svc() - Activate logging |
| * @hdd_ctx: HDD context |
| * |
| * Activates the logging service |
| * |
| * Return: Zero in case of success, negative value otherwise |
| */ |
| static int hdd_logging_sock_activate_svc(hdd_context_t *hdd_ctx) |
| { |
| int ret; |
| struct hdd_config *config = hdd_ctx->config; |
| |
| if (!config->wlanLoggingEnable) |
| return 0; |
| |
| ret = wlan_logging_sock_activate_svc(config->wlanLoggingToConsole, |
| config->wlanLoggingNumBuf); |
| if (ret) |
| hdd_err("wlan_logging_sock_activate_svc failed: %d", ret); |
| return ret; |
| } |
| |
| /** |
| * wlan_hdd_logging_sock_deactivate_svc() - Deactivate logging |
| * @hdd_ctx: HDD context |
| * |
| * Deactivates the logging service |
| * |
| * Return: 0 on deactivating the logging service |
| */ |
| static int hdd_logging_sock_deactivate_svc(hdd_context_t *hdd_ctx) |
| { |
| if (hdd_ctx && hdd_ctx->config->wlanLoggingEnable) |
| return wlan_logging_sock_deactivate_svc(); |
| |
| return 0; |
| } |
| #else |
| static inline int hdd_logging_sock_activate_svc(hdd_context_t *hdd_ctx) |
| { |
| return 0; |
| } |
| |
| static inline int hdd_logging_sock_deactivate_svc(hdd_context_t *hdd_ctx) |
| { |
| return 0; |
| } |
| #endif |
| |
| /** |
| * hdd_register_notifiers - Register netdev notifiers. |
| * @hdd_ctx: HDD context |
| * |
| * Register netdev notifiers like IPv4 and IPv6. |
| * |
| * Return: 0 on success and errno on failure |
| */ |
| static int hdd_register_notifiers(hdd_context_t *hdd_ctx) |
| { |
| int ret; |
| |
| ret = register_netdevice_notifier(&hdd_netdev_notifier); |
| if (ret) { |
| hdd_err("register_netdevice_notifier failed: %d", ret); |
| goto out; |
| } |
| |
| ret = hdd_wlan_register_ip6_notifier(hdd_ctx); |
| if (ret) |
| goto unregister_notifier; |
| |
| hdd_ctx->ipv4_notifier.notifier_call = wlan_hdd_ipv4_changed; |
| ret = register_inetaddr_notifier(&hdd_ctx->ipv4_notifier); |
| if (ret) { |
| hdd_err("Failed to register IPv4 notifier: %d", ret); |
| goto unregister_ip6_notifier; |
| } |
| |
| return 0; |
| |
| unregister_ip6_notifier: |
| hdd_wlan_unregister_ip6_notifier(hdd_ctx); |
| unregister_notifier: |
| unregister_netdevice_notifier(&hdd_netdev_notifier); |
| out: |
| return ret; |
| |
| } |
| |
| /** |
| * hdd_unregister_notifiers - Unregister netdev notifiers. |
| * @hdd_ctx: HDD context |
| * |
| * Unregister netdev notifiers like IPv4 and IPv6. |
| * |
| * Return: None. |
| */ |
| void hdd_unregister_notifiers(hdd_context_t *hdd_ctx) |
| { |
| hdd_wlan_unregister_ip6_notifier(hdd_ctx); |
| |
| unregister_inetaddr_notifier(&hdd_ctx->ipv4_notifier); |
| |
| unregister_netdevice_notifier(&hdd_netdev_notifier); |
| } |
| |
| /** |
| * hdd_exit_netlink_services - Exit netlink services |
| * @hdd_ctx: HDD context |
| * |
| * Exit netlink services like cnss_diag, cesium netlink socket, ptt socket and |
| * nl service. |
| * |
| * Return: None. |
| */ |
| static void hdd_exit_netlink_services(hdd_context_t *hdd_ctx) |
| { |
| hdd_close_cesium_nl_sock(); |
| hdd_deactivate_wifi_pos(); |
| ptt_sock_deactivate_svc(); |
| |
| nl_srv_exit(); |
| } |
| |
| /** |
| * hdd_init_netlink_services- Init netlink services |
| * @hdd_ctx: HDD context |
| * |
| * Init netlink services like cnss_diag, cesium netlink socket, ptt socket and |
| * nl service. |
| * |
| * Return: 0 on success and errno on failure. |
| */ |
| static int hdd_init_netlink_services(hdd_context_t *hdd_ctx) |
| { |
| int ret; |
| |
| ret = wlan_hdd_nl_init(hdd_ctx); |
| if (ret) { |
| hdd_err("nl_srv_init failed: %d", ret); |
| goto out; |
| } |
| cds_set_radio_index(hdd_ctx->radio_index); |
| |
| ret = hdd_activate_wifi_pos(hdd_ctx); |
| if (ret) { |
| hdd_err("hdd_activate_wifi_pos failed: %d", ret); |
| goto err_nl_srv; |
| } |
| |
| ret = ptt_sock_activate_svc(); |
| if (ret) { |
| hdd_err("ptt_sock_activate_svc failed: %d", ret); |
| goto err_nl_srv; |
| } |
| |
| ret = hdd_open_cesium_nl_sock(); |
| if (ret) |
| hdd_err("hdd_open_cesium_nl_sock failed ret: %d", ret); |
| |
| ret = cnss_diag_activate_service(); |
| if (ret) { |
| hdd_err("cnss_diag_activate_service failed: %d", ret); |
| goto err_close_cesium; |
| } |
| |
| return 0; |
| |
| err_close_cesium: |
| hdd_close_cesium_nl_sock(); |
| ptt_sock_deactivate_svc(); |
| err_nl_srv: |
| nl_srv_exit(); |
| out: |
| return ret; |
| } |
| |
| /** |
| * hdd_rx_wake_lock_destroy() - Destroy RX wakelock |
| * @hdd_ctx: HDD context. |
| * |
| * Destroy RX wakelock. |
| * |
| * Return: None. |
| */ |
| static void hdd_rx_wake_lock_destroy(hdd_context_t *hdd_ctx) |
| { |
| qdf_wake_lock_destroy(&hdd_ctx->rx_wake_lock); |
| } |
| |
| /** |
| * hdd_rx_wake_lock_create() - Create RX wakelock |
| * @hdd_ctx: HDD context. |
| * |
| * Create RX wakelock. |
| * |
| * Return: None. |
| */ |
| static void hdd_rx_wake_lock_create(hdd_context_t *hdd_ctx) |
| { |
| qdf_wake_lock_create(&hdd_ctx->rx_wake_lock, "qcom_rx_wakelock"); |
| } |
| |
| /** |
| * hdd_roc_context_init() - Init ROC context |
| * @hdd_ctx: HDD context. |
| * |
| * Initialize ROC context. |
| * |
| * Return: 0 on success and errno on failure. |
| */ |
| static int hdd_roc_context_init(hdd_context_t *hdd_ctx) |
| { |
| qdf_spinlock_create(&hdd_ctx->hdd_roc_req_q_lock); |
| qdf_list_create(&hdd_ctx->hdd_roc_req_q, MAX_ROC_REQ_QUEUE_ENTRY); |
| |
| INIT_DELAYED_WORK(&hdd_ctx->roc_req_work, wlan_hdd_roc_request_dequeue); |
| |
| return 0; |
| } |
| |
| /** |
| * hdd_roc_context_destroy() - Destroy ROC context |
| * @hdd_ctx: HDD context. |
| * |
| * Destroy roc list and flush the pending roc work. |
| * |
| * Return: None. |
| */ |
| static void hdd_roc_context_destroy(hdd_context_t *hdd_ctx) |
| { |
| flush_delayed_work(&hdd_ctx->roc_req_work); |
| qdf_list_destroy(&hdd_ctx->hdd_roc_req_q); |
| qdf_spinlock_destroy(&hdd_ctx->hdd_roc_req_q_lock); |
| } |
| |
| /** |
| * hdd_context_deinit() - Deinitialize HDD context |
| * @hdd_ctx: HDD context. |
| * |
| * Deinitialize HDD context along with all the feature specific contexts but |
| * do not free hdd context itself. Caller of this API is supposed to free |
| * HDD context. |
| * |
| * return: 0 on success and errno on failure. |
| */ |
| static int hdd_context_deinit(hdd_context_t *hdd_ctx) |
| { |
| wlan_hdd_cfg80211_deinit(hdd_ctx->wiphy); |
| |
| hdd_roc_context_destroy(hdd_ctx); |
| |
| hdd_sap_context_destroy(hdd_ctx); |
| |
| hdd_rx_wake_lock_destroy(hdd_ctx); |
| |
| hdd_tdls_context_destroy(hdd_ctx); |
| |
| hdd_scan_context_destroy(hdd_ctx); |
| |
| qdf_list_destroy(&hdd_ctx->hddAdapters); |
| |
| return 0; |
| } |
| |
| /** |
| * hdd_context_destroy() - Destroy HDD context |
| * @hdd_ctx: HDD context to be destroyed. |
| * |
| * Free config and HDD context as well as destroy all the resources. |
| * |
| * Return: None |
| */ |
| static void hdd_context_destroy(hdd_context_t *hdd_ctx) |
| { |
| if (QDF_GLOBAL_FTM_MODE != hdd_get_conparam()) |
| hdd_logging_sock_deactivate_svc(hdd_ctx); |
| |
| wlan_hdd_deinit_tx_rx_histogram(hdd_ctx); |
| |
| hdd_context_deinit(hdd_ctx); |
| |
| qdf_mem_free(hdd_ctx->config); |
| hdd_ctx->config = NULL; |
| |
| wiphy_free(hdd_ctx->wiphy); |
| } |
| |
| /** |
| * wlan_destroy_bug_report_lock() - Destroy bug report lock |
| * |
| * This function is used to destroy bug report lock |
| * |
| * Return: None |
| */ |
| static void wlan_destroy_bug_report_lock(void) |
| { |
| p_cds_contextType p_cds_context; |
| |
| p_cds_context = cds_get_global_context(); |
| if (!p_cds_context) { |
| hdd_err("cds context is NULL"); |
| return; |
| } |
| |
| qdf_spinlock_destroy(&p_cds_context->bug_report_lock); |
| } |
| |
| /** |
| * hdd_wlan_exit() - HDD WLAN exit function |
| * @hdd_ctx: Pointer to the HDD Context |
| * |
| * This is the driver exit point (invoked during rmmod) |
| * |
| * Return: None |
| */ |
| static void hdd_wlan_exit(hdd_context_t *hdd_ctx) |
| { |
| v_CONTEXT_t p_cds_context = hdd_ctx->pcds_context; |
| QDF_STATUS qdf_status; |
| struct wiphy *wiphy = hdd_ctx->wiphy; |
| int driver_status; |
| |
| ENTER(); |
| |
| if (QDF_TIMER_STATE_RUNNING == |
| qdf_mc_timer_get_current_state(&hdd_ctx->iface_change_timer)) { |
| hdd_debug("Stop interface change timer"); |
| qdf_mc_timer_stop(&hdd_ctx->iface_change_timer); |
| } |
| |
| if (!QDF_IS_STATUS_SUCCESS |
| (qdf_mc_timer_destroy(&hdd_ctx->iface_change_timer))) |
| hdd_err("Cannot delete interface change timer"); |
| |
| |
| hdd_unregister_notifiers(hdd_ctx); |
| |
| qdf_mc_timer_destroy(&hdd_ctx->tdls_source_timer); |
| |
| hdd_bus_bandwidth_destroy(hdd_ctx); |
| |
| #ifdef FEATURE_WLAN_AP_AP_ACS_OPTIMIZE |
| if (QDF_TIMER_STATE_RUNNING == |
| qdf_mc_timer_get_current_state(&hdd_ctx->skip_acs_scan_timer)) { |
| qdf_mc_timer_stop(&hdd_ctx->skip_acs_scan_timer); |
| } |
| |
| if (!QDF_IS_STATUS_SUCCESS |
| (qdf_mc_timer_destroy(&hdd_ctx->skip_acs_scan_timer))) { |
| hdd_err("Cannot deallocate ACS Skip timer"); |
| } |
| qdf_spin_lock(&hdd_ctx->acs_skip_lock); |
| qdf_mem_free(hdd_ctx->last_acs_channel_list); |
| hdd_ctx->last_acs_channel_list = NULL; |
| hdd_ctx->num_of_channels = 0; |
| qdf_spin_unlock(&hdd_ctx->acs_skip_lock); |
| #endif |
| |
| mutex_lock(&hdd_ctx->iface_change_lock); |
| driver_status = hdd_ctx->driver_status; |
| mutex_unlock(&hdd_ctx->iface_change_lock); |
| |
| /* |
| * Powersave Offload Case |
| * Disable Idle Power Save Mode |
| */ |
| hdd_set_idle_ps_config(hdd_ctx, false); |
| |
| if (driver_status != DRIVER_MODULES_CLOSED) { |
| hdd_unregister_wext_all_adapters(hdd_ctx); |
| /* |
| * Cancel any outstanding scan requests. We are about to close |
| * all of our adapters, but an adapter structure is what SME |
| * passes back to our callback function. Hence if there |
| * are any outstanding scan requests then there is a |
| * race condition between when the adapter is closed and |
| * when the callback is invoked. We try to resolve that |
| * race condition here by canceling any outstanding scans |
| * before we close the adapters. |
| * Note that the scans may be cancelled in an asynchronous |
| * manner, so ideally there needs to be some kind of |
| * synchronization. Rather than introduce a new |
| * synchronization here, we will utilize the fact that we are |
| * about to Request Full Power, and since that is synchronized, |
| * the expectation is that by the time Request Full Power has |
| * completed, all scans will be cancelled |
| */ |
| wlan_cfg80211_cleanup_scan_queue(hdd_ctx->hdd_pdev); |
| hdd_abort_mac_scan_all_adapters(hdd_ctx); |
| hdd_abort_sched_scan_all_adapters(hdd_ctx); |
| hdd_stop_all_adapters(hdd_ctx); |
| } |
| |
| wlan_destroy_bug_report_lock(); |
| |
| /* |
| * Close the scheduler before calling cds_close to make sure |
| * no thread is scheduled after the each module close is |
| * is called i.e after all the data structures are freed. |
| */ |
| qdf_status = cds_sched_close(p_cds_context); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| hdd_err("Failed to close CDS Scheduler"); |
| QDF_ASSERT(QDF_IS_STATUS_SUCCESS(qdf_status)); |
| } |
| |
| hdd_wlan_stop_modules(hdd_ctx, false); |
| |
| qdf_spinlock_destroy(&hdd_ctx->hdd_adapter_lock); |
| qdf_spinlock_destroy(&hdd_ctx->sta_update_info_lock); |
| qdf_spinlock_destroy(&hdd_ctx->connection_status_lock); |
| |
| /* |
| * Close CDS |
| * This frees pMac(HAL) context. There should not be any call |
| * that requires pMac access after this. |
| */ |
| |
| hdd_green_ap_deinit(hdd_ctx); |
| hdd_request_manager_deinit(); |
| |
| hdd_runtime_suspend_context_deinit(hdd_ctx); |
| hdd_close_all_adapters(hdd_ctx, false); |
| |
| hdd_ipa_cleanup(hdd_ctx); |
| |
| /* Free up RoC request queue and flush workqueue */ |
| cds_flush_work(&hdd_ctx->roc_req_work); |
| |
| wlansap_global_deinit(); |
| wlan_hdd_deinit_chan_info(hdd_ctx); |
| /* |
| * If there is re_init failure wiphy would have already de-registered |
| * check the wiphy status before un-registering again |
| */ |
| if (wiphy && wiphy->registered) { |
| wiphy_unregister(wiphy); |
| wlan_hdd_cfg80211_deinit(wiphy); |
| hdd_lpass_notify_stop(hdd_ctx); |
| } |
| |
| hdd_exit_netlink_services(hdd_ctx); |
| mutex_destroy(&hdd_ctx->iface_change_lock); |
| #ifdef FEATURE_WLAN_CH_AVOID |
| mutex_destroy(&hdd_ctx->avoid_freq_lock); |
| #endif |
| |
| driver_status = hdd_objmgr_release_and_destroy_pdev(hdd_ctx); |
| if (driver_status) |
| hdd_err("Pdev delete failed"); |
| |
| driver_status = hdd_objmgr_release_and_destroy_psoc(hdd_ctx); |
| if (driver_status) |
| hdd_err("Psoc delete failed"); |
| hdd_context_destroy(hdd_ctx); |
| } |
| |
| void __hdd_wlan_exit(void) |
| { |
| hdd_context_t *hdd_ctx; |
| |
| ENTER(); |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| if (!hdd_ctx) { |
| hdd_err("Invalid HDD Context"); |
| EXIT(); |
| return; |
| } |
| |
| /* Check IPA HW Pipe shutdown */ |
| hdd_ipa_uc_force_pipe_shutdown(hdd_ctx); |
| |
| memdump_deinit(); |
| hdd_driver_memdump_deinit(); |
| |
| /* Do all the cleanup before deregistering the driver */ |
| hdd_wlan_exit(hdd_ctx); |
| |
| EXIT(); |
| } |
| |
| #ifdef FEATURE_WLAN_AP_AP_ACS_OPTIMIZE |
| /** |
| * hdd_skip_acs_scan_timer_handler() - skip ACS scan timer timeout handler |
| * @data: pointer to hdd_context_t |
| * |
| * This function will reset acs_scan_status to eSAP_DO_NEW_ACS_SCAN. |
| * Then new ACS request will do a fresh scan without reusing the cached |
| * scan information. |
| * |
| * Return: void |
| */ |
| static void hdd_skip_acs_scan_timer_handler(void *data) |
| { |
| hdd_context_t *hdd_ctx = (hdd_context_t *) data; |
| |
| hdd_debug("ACS Scan result expired. Reset ACS scan skip"); |
| hdd_ctx->skip_acs_scan_status = eSAP_DO_NEW_ACS_SCAN; |
| qdf_spin_lock(&hdd_ctx->acs_skip_lock); |
| qdf_mem_free(hdd_ctx->last_acs_channel_list); |
| hdd_ctx->last_acs_channel_list = NULL; |
| hdd_ctx->num_of_channels = 0; |
| qdf_spin_unlock(&hdd_ctx->acs_skip_lock); |
| |
| if (!hdd_ctx->hHal) |
| return; |
| sme_scan_flush_result(hdd_ctx->hHal); |
| } |
| #endif |
| |
| #ifdef QCA_HT_2040_COEX |
| /** |
| * hdd_wlan_set_ht2040_mode() - notify FW with HT20/HT40 mode |
| * @adapter: pointer to adapter |
| * @staId: station id |
| * @macAddrSTA: station MAC address |
| * @channel_type: channel type |
| * |
| * This function notifies FW with HT20/HT40 mode |
| * |
| * Return: 0 if successful, error number otherwise |
| */ |
| int hdd_wlan_set_ht2040_mode(hdd_adapter_t *adapter, uint16_t staId, |
| struct qdf_mac_addr macAddrSTA, int channel_type) |
| { |
| int status; |
| QDF_STATUS qdf_status; |
| hdd_context_t *hdd_ctx = NULL; |
| |
| hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| |
| status = wlan_hdd_validate_context(hdd_ctx); |
| if (status) |
| return status; |
| |
| if (!hdd_ctx->hHal) |
| return -EINVAL; |
| |
| qdf_status = sme_notify_ht2040_mode(hdd_ctx->hHal, staId, macAddrSTA, |
| adapter->sessionId, channel_type); |
| if (QDF_STATUS_SUCCESS != qdf_status) { |
| hdd_err("Fail to send notification with ht2040 mode"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| /** |
| * hdd_wlan_notify_modem_power_state() - notify FW with modem power status |
| * @state: state |
| * |
| * This function notifies FW with modem power status |
| * |
| * Return: 0 if successful, error number otherwise |
| */ |
| int hdd_wlan_notify_modem_power_state(int state) |
| { |
| int status; |
| QDF_STATUS qdf_status; |
| hdd_context_t *hdd_ctx; |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| status = wlan_hdd_validate_context(hdd_ctx); |
| if (status) |
| return status; |
| |
| if (!hdd_ctx->hHal) |
| return -EINVAL; |
| |
| qdf_status = sme_notify_modem_power_state(hdd_ctx->hHal, state); |
| if (QDF_STATUS_SUCCESS != qdf_status) { |
| hdd_err("Fail to send notification with modem power state %d", |
| state); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /** |
| * |
| * hdd_post_cds_enable_config() - HDD post cds start config helper |
| * @adapter - Pointer to the HDD |
| * |
| * Return: None |
| */ |
| QDF_STATUS hdd_post_cds_enable_config(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS qdf_ret_status; |
| |
| /* |
| * Send ready indication to the HDD. This will kick off the MAC |
| * into a 'running' state and should kick off an initial scan. |
| */ |
| qdf_ret_status = sme_hdd_ready_ind(hdd_ctx->hHal); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_ret_status)) { |
| hdd_err("sme_hdd_ready_ind() failed with status code %08d [x%08x]", |
| qdf_ret_status, qdf_ret_status); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /* wake lock APIs for HDD */ |
| void hdd_prevent_suspend(uint32_t reason) |
| { |
| qdf_wake_lock_acquire(&wlan_wake_lock, reason); |
| } |
| |
| void hdd_allow_suspend(uint32_t reason) |
| { |
| qdf_wake_lock_release(&wlan_wake_lock, reason); |
| } |
| |
| void hdd_prevent_suspend_timeout(uint32_t timeout, uint32_t reason) |
| { |
| cds_host_diag_log_work(&wlan_wake_lock, timeout, reason); |
| qdf_wake_lock_timeout_acquire(&wlan_wake_lock, timeout); |
| } |
| |
| /** |
| * hdd_exchange_version_and_caps() - exchange version and capability with target |
| * @hdd_ctx: Pointer to HDD context |
| * |
| * This is the HDD function to exchange version and capability information |
| * between Host and Target |
| * |
| * This function gets reported version of FW. |
| * It also finds the version of target headers used to compile the host; |
| * It compares the above two and prints a warning if they are different; |
| * It gets the SW and HW version string; |
| * Finally, it exchanges capabilities between host and target i.e. host |
| * and target exchange a msg indicating the features they support through a |
| * bitmap |
| * |
| * Return: None |
| */ |
| void hdd_exchange_version_and_caps(hdd_context_t *hdd_ctx) |
| { |
| |
| tSirVersionType versionCompiled; |
| tSirVersionType versionReported; |
| tSirVersionString versionString; |
| uint8_t fwFeatCapsMsgSupported = 0; |
| QDF_STATUS vstatus; |
| |
| memset(&versionCompiled, 0, sizeof(versionCompiled)); |
| memset(&versionReported, 0, sizeof(versionReported)); |
| |
| /* retrieve and display WCNSS version information */ |
| do { |
| |
| vstatus = sme_get_wcnss_wlan_compiled_version(hdd_ctx->hHal, |
| &versionCompiled); |
| if (!QDF_IS_STATUS_SUCCESS(vstatus)) { |
| hdd_err("unable to retrieve WCNSS WLAN compiled version"); |
| break; |
| } |
| |
| vstatus = sme_get_wcnss_wlan_reported_version(hdd_ctx->hHal, |
| &versionReported); |
| if (!QDF_IS_STATUS_SUCCESS(vstatus)) { |
| hdd_err("unable to retrieve WCNSS WLAN reported version"); |
| break; |
| } |
| |
| if ((versionCompiled.major != versionReported.major) || |
| (versionCompiled.minor != versionReported.minor) || |
| (versionCompiled.version != versionReported.version) || |
| (versionCompiled.revision != versionReported.revision)) { |
| pr_err("%s: WCNSS WLAN Version %u.%u.%u.%u, " |
| "Host expected %u.%u.%u.%u\n", |
| WLAN_MODULE_NAME, |
| (int)versionReported.major, |
| (int)versionReported.minor, |
| (int)versionReported.version, |
| (int)versionReported.revision, |
| (int)versionCompiled.major, |
| (int)versionCompiled.minor, |
| (int)versionCompiled.version, |
| (int)versionCompiled.revision); |
| } else { |
| pr_info("%s: WCNSS WLAN version %u.%u.%u.%u\n", |
| WLAN_MODULE_NAME, |
| (int)versionReported.major, |
| (int)versionReported.minor, |
| (int)versionReported.version, |
| (int)versionReported.revision); |
| } |
| |
| vstatus = sme_get_wcnss_software_version(hdd_ctx->hHal, |
| versionString, |
| sizeof(versionString)); |
| if (!QDF_IS_STATUS_SUCCESS(vstatus)) { |
| hdd_err("unable to retrieve WCNSS software version string"); |
| break; |
| } |
| |
| pr_info("%s: WCNSS software version %s\n", |
| WLAN_MODULE_NAME, versionString); |
| |
| vstatus = sme_get_wcnss_hardware_version(hdd_ctx->hHal, |
| versionString, |
| sizeof(versionString)); |
| if (!QDF_IS_STATUS_SUCCESS(vstatus)) { |
| hdd_err("unable to retrieve WCNSS hardware version string"); |
| break; |
| } |
| |
| pr_info("%s: WCNSS hardware version %s\n", |
| WLAN_MODULE_NAME, versionString); |
| |
| /* |
| * 1.Check if FW version is greater than 0.1.1.0. Only then |
| * send host-FW capability exchange message |
| * 2.Host-FW capability exchange message is only present on |
| * target 1.1 so send the message only if it the target is 1.1 |
| * minor numbers for different target branches: |
| * 0 -> (1.0)Mainline Build |
| * 1 -> (1.1)Mainline Build |
| * 2->(1.04) Stability Build |
| */ |
| if (((versionReported.major > 0) || (versionReported.minor > 1) |
| || ((versionReported.minor >= 1) |
| && (versionReported.version >= 1))) |
| && ((versionReported.major == 1) |
| && (versionReported.minor >= 1))) |
| fwFeatCapsMsgSupported = 1; |
| |
| if (fwFeatCapsMsgSupported) { |
| /* |
| * Indicate if IBSS heartbeat monitoring needs to be |
| * offloaded |
| */ |
| if (!hdd_ctx->config->enableIbssHeartBeatOffload) { |
| sme_disable_feature_capablity |
| (IBSS_HEARTBEAT_OFFLOAD); |
| } |
| |
| sme_feature_caps_exchange(hdd_ctx->hHal); |
| } |
| |
| } while (0); |
| |
| } |
| |
| /* Initialize channel list in sme based on the country code */ |
| QDF_STATUS hdd_set_sme_chan_list(hdd_context_t *hdd_ctx) |
| { |
| |
| return sme_init_chan_list(hdd_ctx->hHal, |
| hdd_ctx->reg.alpha2, |
| hdd_ctx->reg.cc_src); |
| } |
| |
| /** |
| * hdd_is_5g_supported() - check if hardware supports 5GHz |
| * @hdd_ctx: Pointer to the hdd context |
| * |
| * HDD function to know if hardware supports 5GHz |
| * |
| * Return: true if hardware supports 5GHz |
| */ |
| bool hdd_is_5g_supported(hdd_context_t *hdd_ctx) |
| { |
| if (!hdd_ctx || !hdd_ctx->config) |
| return true; |
| |
| if (hdd_ctx->config->nBandCapability != eCSR_BAND_24) |
| return true; |
| else |
| return false; |
| } |
| |
| static int hdd_wiphy_init(hdd_context_t *hdd_ctx) |
| { |
| struct wiphy *wiphy; |
| int ret_val; |
| |
| wiphy = hdd_ctx->wiphy; |
| |
| /* |
| * The channel information in |
| * wiphy needs to be initialized before wiphy registration |
| */ |
| ret_val = hdd_regulatory_init(hdd_ctx, wiphy); |
| if (ret_val) { |
| hdd_err("regulatory init failed"); |
| return ret_val; |
| } |
| |
| #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 11, 0)) |
| wiphy->wowlan = &wowlan_support_reg_init; |
| #else |
| wiphy->wowlan.flags = WIPHY_WOWLAN_ANY | |
| WIPHY_WOWLAN_MAGIC_PKT | |
| WIPHY_WOWLAN_DISCONNECT | |
| WIPHY_WOWLAN_SUPPORTS_GTK_REKEY | |
| WIPHY_WOWLAN_GTK_REKEY_FAILURE | |
| WIPHY_WOWLAN_EAP_IDENTITY_REQ | |
| WIPHY_WOWLAN_4WAY_HANDSHAKE | |
| WIPHY_WOWLAN_RFKILL_RELEASE; |
| |
| wiphy->wowlan.n_patterns = (WOW_MAX_FILTER_LISTS * |
| WOW_MAX_FILTERS_PER_LIST); |
| wiphy->wowlan.pattern_min_len = WOW_MIN_PATTERN_SIZE; |
| wiphy->wowlan.pattern_max_len = WOW_MAX_PATTERN_SIZE; |
| #endif |
| |
| /* registration of wiphy dev with cfg80211 */ |
| ret_val = wlan_hdd_cfg80211_register(wiphy); |
| if (0 > ret_val) { |
| hdd_err("wiphy registration failed"); |
| return ret_val; |
| } |
| |
| if (!hdd_ctx->reg_offload) |
| hdd_program_country_code(hdd_ctx); |
| |
| return ret_val; |
| } |
| |
| /** |
| * hdd_pld_request_bus_bandwidth() - Function to control bus bandwidth |
| * @hdd_ctx - handle to hdd context |
| * @tx_packets - transmit packet count |
| * @rx_packets - receive packet count |
| * |
| * The function controls the bus bandwidth and dynamic control of |
| * tcp delayed ack configuration |
| * |
| * Returns: None |
| */ |
| #ifdef MSM_PLATFORM |
| static void hdd_pld_request_bus_bandwidth(hdd_context_t *hdd_ctx, |
| const uint64_t tx_packets, |
| const uint64_t rx_packets) |
| { |
| uint64_t total = tx_packets + rx_packets; |
| uint64_t temp_rx = 0; |
| uint64_t temp_tx = 0; |
| enum pld_bus_width_type next_vote_level = PLD_BUS_WIDTH_NONE; |
| static enum wlan_tp_level next_rx_level = WLAN_SVC_TP_NONE; |
| enum wlan_tp_level next_tx_level = WLAN_SVC_TP_NONE; |
| uint32_t delack_timer_cnt = hdd_ctx->config->tcp_delack_timer_count; |
| uint16_t index = 0; |
| bool vote_level_change = false; |
| bool rx_level_change = false; |
| bool tx_level_change = false; |
| |
| if (total > hdd_ctx->config->busBandwidthHighThreshold) |
| next_vote_level = PLD_BUS_WIDTH_HIGH; |
| else if (total > hdd_ctx->config->busBandwidthMediumThreshold) |
| next_vote_level = PLD_BUS_WIDTH_MEDIUM; |
| else if (total > hdd_ctx->config->busBandwidthLowThreshold) |
| next_vote_level = PLD_BUS_WIDTH_LOW; |
| else |
| next_vote_level = PLD_BUS_WIDTH_NONE; |
| |
| if (hdd_ctx->cur_vote_level != next_vote_level) { |
| hdd_debug("trigger level %d, tx_packets: %lld, rx_packets: %lld", |
| next_vote_level, tx_packets, rx_packets); |
| hdd_ctx->cur_vote_level = next_vote_level; |
| vote_level_change = true; |
| pld_request_bus_bandwidth(hdd_ctx->parent_dev, next_vote_level); |
| if (next_vote_level == PLD_BUS_WIDTH_LOW) { |
| if (hdd_ctx->hbw_requested) { |
| pld_remove_pm_qos(hdd_ctx->parent_dev); |
| hdd_ctx->hbw_requested = false; |
| } |
| if (cds_sched_handle_throughput_req(false)) |
| hdd_warn("low bandwidth set rx affinity fail"); |
| } else { |
| if (!hdd_ctx->hbw_requested) { |
| pld_request_pm_qos(hdd_ctx->parent_dev, 1); |
| hdd_ctx->hbw_requested = true; |
| } |
| |
| if (cds_sched_handle_throughput_req(true)) |
| hdd_warn("high bandwidth set rx affinity fail"); |
| } |
| hdd_napi_apply_throughput_policy(hdd_ctx, tx_packets, rx_packets); |
| } |
| |
| /* fine-tuning parameters for RX Flows */ |
| temp_rx = (rx_packets + hdd_ctx->prev_rx) / 2; |
| |
| hdd_ctx->prev_rx = rx_packets; |
| |
| if (temp_rx > hdd_ctx->config->tcpDelackThresholdHigh) { |
| if ((hdd_ctx->cur_rx_level != WLAN_SVC_TP_HIGH) && |
| (++hdd_ctx->rx_high_ind_cnt == delack_timer_cnt)) { |
| next_rx_level = WLAN_SVC_TP_HIGH; |
| } |
| } else { |
| hdd_ctx->rx_high_ind_cnt = 0; |
| next_rx_level = WLAN_SVC_TP_LOW; |
| } |
| |
| if (hdd_ctx->cur_rx_level != next_rx_level) { |
| hdd_debug("TCP DELACK trigger level %d, average_rx: %llu", |
| next_rx_level, temp_rx); |
| hdd_ctx->cur_rx_level = next_rx_level; |
| rx_level_change = true; |
| /* Send throughput indication only if it is enabled. |
| * Disabling tcp_del_ack will revert the tcp stack behavior |
| * to default delayed ack. Note that this will disable the |
| * dynamic delayed ack mechanism across the system |
| */ |
| if (hdd_ctx->config->enable_tcp_delack) |
| wlan_hdd_send_svc_nlink_msg(hdd_ctx->radio_index, |
| WLAN_SVC_WLAN_TP_IND, |
| &next_rx_level, |
| sizeof(next_rx_level)); |
| } |
| |
| /* fine-tuning parameters for TX Flows */ |
| temp_tx = (tx_packets + hdd_ctx->prev_tx) / 2; |
| hdd_ctx->prev_tx = tx_packets; |
| if (temp_tx > hdd_ctx->config->tcp_tx_high_tput_thres) |
| next_tx_level = WLAN_SVC_TP_HIGH; |
| else |
| next_tx_level = WLAN_SVC_TP_LOW; |
| |
| if (hdd_ctx->cur_tx_level != next_tx_level) { |
| hdd_debug("change TCP TX trigger level %d, average_tx: %llu", |
| next_tx_level, temp_tx); |
| hdd_ctx->cur_tx_level = next_tx_level; |
| tx_level_change = true; |
| wlan_hdd_send_svc_nlink_msg(hdd_ctx->radio_index, |
| WLAN_SVC_WLAN_TP_TX_IND, |
| &next_tx_level, |
| sizeof(next_tx_level)); |
| } |
| |
| index = hdd_ctx->hdd_txrx_hist_idx; |
| |
| if (vote_level_change || tx_level_change || rx_level_change) { |
| hdd_ctx->hdd_txrx_hist[index].next_tx_level = next_tx_level; |
| hdd_ctx->hdd_txrx_hist[index].next_rx_level = next_rx_level; |
| hdd_ctx->hdd_txrx_hist[index].next_vote_level = next_vote_level; |
| hdd_ctx->hdd_txrx_hist[index].interval_rx = rx_packets; |
| hdd_ctx->hdd_txrx_hist[index].interval_tx = tx_packets; |
| hdd_ctx->hdd_txrx_hist[index].qtime = qdf_get_log_timestamp(); |
| hdd_ctx->hdd_txrx_hist_idx++; |
| hdd_ctx->hdd_txrx_hist_idx &= NUM_TX_RX_HISTOGRAM_MASK; |
| } |
| } |
| |
| #define HDD_BW_GET_DIFF(_x, _y) (unsigned long)((ULONG_MAX - (_y)) + (_x) + 1) |
| static void hdd_bus_bw_work_handler(struct work_struct *work) |
| { |
| hdd_context_t *hdd_ctx = container_of(work, hdd_context_t, |
| bus_bw_work); |
| hdd_adapter_t *adapter = NULL; |
| uint64_t tx_packets = 0, rx_packets = 0; |
| uint64_t fwd_tx_packets = 0, fwd_rx_packets = 0; |
| uint64_t fwd_tx_packets_diff = 0, fwd_rx_packets_diff = 0; |
| uint64_t total_tx = 0, total_rx = 0; |
| hdd_adapter_list_node_t *adapterNode = NULL; |
| QDF_STATUS status = 0; |
| A_STATUS ret; |
| bool connected = false; |
| uint32_t ipa_tx_packets = 0, ipa_rx_packets = 0; |
| |
| if (wlan_hdd_validate_context(hdd_ctx)) |
| return; |
| |
| for (status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| NULL != adapterNode && QDF_STATUS_SUCCESS == status; |
| status = |
| hdd_get_next_adapter(hdd_ctx, adapterNode, &adapterNode)) { |
| |
| if (adapterNode->pAdapter == NULL) |
| continue; |
| adapter = adapterNode->pAdapter; |
| /* |
| * Validate magic so we don't end up accessing |
| * an invalid adapter. |
| */ |
| if (adapter->magic != WLAN_HDD_ADAPTER_MAGIC) |
| continue; |
| |
| if ((adapter->device_mode == QDF_STA_MODE || |
| adapter->device_mode == QDF_P2P_CLIENT_MODE) && |
| WLAN_HDD_GET_STATION_CTX_PTR(adapter)->conn_info.connState |
| != eConnectionState_Associated) { |
| |
| continue; |
| } |
| |
| if ((adapter->device_mode == QDF_SAP_MODE || |
| adapter->device_mode == QDF_P2P_GO_MODE) && |
| WLAN_HDD_GET_AP_CTX_PTR(adapter)->bApActive == false) { |
| |
| continue; |
| } |
| |
| tx_packets += HDD_BW_GET_DIFF(adapter->stats.tx_packets, |
| adapter->prev_tx_packets); |
| rx_packets += HDD_BW_GET_DIFF(adapter->stats.rx_packets, |
| adapter->prev_rx_packets); |
| |
| if (adapter->device_mode == QDF_SAP_MODE || |
| adapter->device_mode == QDF_P2P_GO_MODE || |
| adapter->device_mode == QDF_IBSS_MODE) { |
| |
| ret = cdp_get_intra_bss_fwd_pkts_count( |
| cds_get_context(QDF_MODULE_ID_SOC), |
| adapter->sessionId, |
| &fwd_tx_packets, &fwd_rx_packets); |
| if (ret == A_OK) { |
| fwd_tx_packets_diff += HDD_BW_GET_DIFF( |
| fwd_tx_packets, |
| adapter->prev_fwd_tx_packets); |
| fwd_rx_packets_diff += HDD_BW_GET_DIFF( |
| fwd_tx_packets, |
| adapter->prev_fwd_rx_packets); |
| } |
| } |
| |
| total_rx += adapter->stats.rx_packets; |
| total_tx += adapter->stats.tx_packets; |
| |
| spin_lock_bh(&hdd_ctx->bus_bw_lock); |
| adapter->prev_tx_packets = adapter->stats.tx_packets; |
| adapter->prev_rx_packets = adapter->stats.rx_packets; |
| adapter->prev_fwd_tx_packets = fwd_tx_packets; |
| adapter->prev_fwd_rx_packets = fwd_rx_packets; |
| spin_unlock_bh(&hdd_ctx->bus_bw_lock); |
| connected = true; |
| } |
| |
| /* add intra bss forwarded tx and rx packets */ |
| tx_packets += fwd_tx_packets_diff; |
| rx_packets += fwd_rx_packets_diff; |
| |
| hdd_ipa_uc_stat_query(hdd_ctx, &ipa_tx_packets, &ipa_rx_packets); |
| tx_packets += (uint64_t)ipa_tx_packets; |
| rx_packets += (uint64_t)ipa_rx_packets; |
| |
| if (!connected) { |
| hdd_err("bus bandwidth timer running in disconnected state"); |
| return; |
| } |
| |
| hdd_pld_request_bus_bandwidth(hdd_ctx, tx_packets, rx_packets); |
| |
| hdd_ipa_set_perf_level(hdd_ctx, tx_packets, rx_packets); |
| hdd_ipa_uc_stat_request(adapter, 2); |
| |
| /* ensure periodic timer should still be running before restarting it */ |
| qdf_spinlock_acquire(&hdd_ctx->bus_bw_timer_lock); |
| if (hdd_ctx->bus_bw_timer_running) |
| qdf_timer_mod(&hdd_ctx->bus_bw_timer, |
| hdd_ctx->config->busBandwidthComputeInterval); |
| qdf_spinlock_release(&hdd_ctx->bus_bw_timer_lock); |
| } |
| |
| /** |
| * __hdd_bus_bw_cbk() - Bus bandwidth data structure callback. |
| * @arg: Argument of timer function |
| * |
| * Schedule a workqueue in this function where all the processing is done. |
| * |
| * Return: None. |
| */ |
| static void __hdd_bus_bw_cbk(void *arg) |
| { |
| hdd_context_t *hdd_ctx = (hdd_context_t *) arg; |
| |
| if (wlan_hdd_validate_context(hdd_ctx)) |
| return; |
| |
| schedule_work(&hdd_ctx->bus_bw_work); |
| } |
| |
| /** |
| * hdd_bus_bw_cbk() - Wrapper for bus bw callback for SSR protection. |
| * @arg: Argument of timer function |
| * |
| * Return: None. |
| */ |
| static void hdd_bus_bw_cbk(void *arg) |
| { |
| cds_ssr_protect(__func__); |
| __hdd_bus_bw_cbk(arg); |
| cds_ssr_unprotect(__func__); |
| } |
| |
| int hdd_bus_bandwidth_init(hdd_context_t *hdd_ctx) |
| { |
| spin_lock_init(&hdd_ctx->bus_bw_lock); |
| INIT_WORK(&hdd_ctx->bus_bw_work, |
| hdd_bus_bw_work_handler); |
| hdd_ctx->bus_bw_timer_running = false; |
| qdf_spinlock_create(&hdd_ctx->bus_bw_timer_lock); |
| qdf_timer_init(NULL, |
| &hdd_ctx->bus_bw_timer, |
| hdd_bus_bw_cbk, (void *)hdd_ctx, |
| QDF_TIMER_TYPE_SW); |
| |
| return 0; |
| } |
| |
| void hdd_bus_bandwidth_destroy(hdd_context_t *hdd_ctx) |
| { |
| if (hdd_ctx->bus_bw_timer_running) |
| hdd_reset_tcp_delack(hdd_ctx); |
| |
| hdd_debug("wait for bus bw work to flush"); |
| cancel_work_sync(&hdd_ctx->bus_bw_work); |
| qdf_timer_free(&hdd_ctx->bus_bw_timer); |
| hdd_ctx->bus_bw_timer_running = false; |
| qdf_spinlock_destroy(&hdd_ctx->bus_bw_timer_lock); |
| } |
| #endif |
| |
| /** |
| * wlan_hdd_init_tx_rx_histogram() - init tx/rx histogram stats |
| * @hdd_ctx: hdd context |
| * |
| * Return: 0 for success or error code |
| */ |
| static int wlan_hdd_init_tx_rx_histogram(hdd_context_t *hdd_ctx) |
| { |
| hdd_ctx->hdd_txrx_hist = qdf_mem_malloc( |
| (sizeof(struct hdd_tx_rx_histogram) * NUM_TX_RX_HISTOGRAM)); |
| if (hdd_ctx->hdd_txrx_hist == NULL) { |
| hdd_err("Failed malloc for hdd_txrx_hist"); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| /** |
| * wlan_hdd_deinit_tx_rx_histogram() - deinit tx/rx histogram stats |
| * @hdd_ctx: hdd context |
| * |
| * Return: none |
| */ |
| void wlan_hdd_deinit_tx_rx_histogram(hdd_context_t *hdd_ctx) |
| { |
| if (!hdd_ctx || hdd_ctx->hdd_txrx_hist == NULL) |
| return; |
| |
| qdf_mem_free(hdd_ctx->hdd_txrx_hist); |
| hdd_ctx->hdd_txrx_hist = NULL; |
| } |
| |
| static uint8_t *convert_level_to_string(uint32_t level) |
| { |
| switch (level) { |
| /* initialize the wlan sub system */ |
| case WLAN_SVC_TP_NONE: |
| return "NONE"; |
| case WLAN_SVC_TP_LOW: |
| return "LOW"; |
| case WLAN_SVC_TP_MEDIUM: |
| return "MED"; |
| case WLAN_SVC_TP_HIGH: |
| return "HIGH"; |
| default: |
| return "INVAL"; |
| } |
| } |
| |
| |
| /** |
| * wlan_hdd_display_tx_rx_histogram() - display tx rx histogram |
| * @hdd_ctx: hdd context |
| * |
| * Return: none |
| */ |
| void wlan_hdd_display_tx_rx_histogram(hdd_context_t *hdd_ctx) |
| { |
| int i; |
| |
| #ifdef MSM_PLATFORM |
| hdd_debug("BW compute Interval: %dms", |
| hdd_ctx->config->busBandwidthComputeInterval); |
| hdd_debug("BW High TH: %d BW Med TH: %d BW Low TH: %d", |
| hdd_ctx->config->busBandwidthHighThreshold, |
| hdd_ctx->config->busBandwidthMediumThreshold, |
| hdd_ctx->config->busBandwidthLowThreshold); |
| hdd_debug("Enable TCP DEL ACK: %d", |
| hdd_ctx->config->enable_tcp_delack); |
| hdd_debug("TCP DEL High TH: %d TCP DEL Low TH: %d", |
| hdd_ctx->config->tcpDelackThresholdHigh, |
| hdd_ctx->config->tcpDelackThresholdLow); |
| hdd_debug("TCP TX HIGH TP TH: %d (Use to set tcp_output_bytes_limit)", |
| hdd_ctx->config->tcp_tx_high_tput_thres); |
| #endif |
| |
| hdd_debug("Total entries: %d Current index: %d", |
| NUM_TX_RX_HISTOGRAM, hdd_ctx->hdd_txrx_hist_idx); |
| |
| hdd_debug("[index][timestamp]: interval_rx, interval_tx, bus_bw_level, RX TP Level, TX TP Level"); |
| |
| for (i = 0; i < NUM_TX_RX_HISTOGRAM; i++) { |
| /* using hdd_log to avoid printing function name */ |
| if (hdd_ctx->hdd_txrx_hist[i].qtime > 0) |
| hdd_log(QDF_TRACE_LEVEL_ERROR, |
| "[%3d][%15llu]: %6llu, %6llu, %s, %s, %s", |
| i, hdd_ctx->hdd_txrx_hist[i].qtime, |
| hdd_ctx->hdd_txrx_hist[i].interval_rx, |
| hdd_ctx->hdd_txrx_hist[i].interval_tx, |
| convert_level_to_string( |
| hdd_ctx->hdd_txrx_hist[i]. |
| next_vote_level), |
| convert_level_to_string( |
| hdd_ctx->hdd_txrx_hist[i]. |
| next_rx_level), |
| convert_level_to_string( |
| hdd_ctx->hdd_txrx_hist[i]. |
| next_tx_level)); |
| } |
| |
| return; |
| } |
| |
| /** |
| * wlan_hdd_clear_tx_rx_histogram() - clear tx rx histogram |
| * @hdd_ctx: hdd context |
| * |
| * Return: none |
| */ |
| void wlan_hdd_clear_tx_rx_histogram(hdd_context_t *hdd_ctx) |
| { |
| hdd_ctx->hdd_txrx_hist_idx = 0; |
| qdf_mem_zero(hdd_ctx->hdd_txrx_hist, |
| (sizeof(struct hdd_tx_rx_histogram) * NUM_TX_RX_HISTOGRAM)); |
| } |
| |
| /** |
| * wlan_hdd_display_netif_queue_history() - display netif queue history |
| * @pHddCtx: hdd context |
| * |
| * Return: none |
| */ |
| void wlan_hdd_display_netif_queue_history(hdd_context_t *hdd_ctx) |
| { |
| |
| hdd_adapter_t *adapter = NULL; |
| hdd_adapter_list_node_t *adapter_node = NULL, *next = NULL; |
| QDF_STATUS status; |
| int i; |
| qdf_time_t total, pause, unpause, curr_time, delta; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| while (NULL != adapter_node && QDF_STATUS_SUCCESS == status) { |
| adapter = adapter_node->pAdapter; |
| |
| hdd_debug("Netif queue operation statistics:"); |
| hdd_debug("Session_id %d device mode %d", |
| adapter->sessionId, adapter->device_mode); |
| hdd_debug("Current pause_map value %x", adapter->pause_map); |
| curr_time = qdf_system_ticks(); |
| total = curr_time - adapter->start_time; |
| delta = curr_time - adapter->last_time; |
| if (adapter->pause_map) { |
| pause = adapter->total_pause_time + delta; |
| unpause = adapter->total_unpause_time; |
| } else { |
| unpause = adapter->total_unpause_time + delta; |
| pause = adapter->total_pause_time; |
| } |
| hdd_debug("Total: %ums Pause: %ums Unpause: %ums", |
| qdf_system_ticks_to_msecs(total), |
| qdf_system_ticks_to_msecs(pause), |
| qdf_system_ticks_to_msecs(unpause)); |
| hdd_debug("reason_type: pause_cnt: unpause_cnt: pause_time"); |
| |
| for (i = WLAN_CONTROL_PATH; i < WLAN_REASON_TYPE_MAX; i++) { |
| qdf_time_t pause_delta = 0; |
| |
| if (adapter->pause_map & (1 << i)) |
| pause_delta = delta; |
| |
| /* using hdd_log to avoid printing function name */ |
| hdd_log(QDF_TRACE_LEVEL_ERROR, |
| "%s: %d: %d: %ums", |
| hdd_reason_type_to_string(i), |
| adapter->queue_oper_stats[i].pause_count, |
| adapter->queue_oper_stats[i].unpause_count, |
| qdf_system_ticks_to_msecs( |
| adapter->queue_oper_stats[i].total_pause_time + |
| pause_delta)); |
| } |
| |
| hdd_debug("Netif queue operation history:"); |
| hdd_debug("Total entries: %d current index %d", |
| WLAN_HDD_MAX_HISTORY_ENTRY, adapter->history_index); |
| |
| hdd_debug("index: time: action_type: reason_type: pause_map"); |
| |
| for (i = 0; i < WLAN_HDD_MAX_HISTORY_ENTRY; i++) { |
| /* using hdd_log to avoid printing function name */ |
| if (adapter->queue_oper_history[i].time == 0) |
| continue; |
| hdd_log(QDF_TRACE_LEVEL_ERROR, |
| "%d: %u: %s: %s: %x", |
| i, qdf_system_ticks_to_msecs( |
| adapter->queue_oper_history[i].time), |
| hdd_action_type_to_string( |
| adapter->queue_oper_history[i].netif_action), |
| hdd_reason_type_to_string( |
| adapter->queue_oper_history[i].netif_reason), |
| adapter->queue_oper_history[i].pause_map); |
| } |
| |
| status = hdd_get_next_adapter(hdd_ctx, adapter_node, &next); |
| adapter_node = next; |
| } |
| |
| |
| } |
| |
| /** |
| * wlan_hdd_clear_netif_queue_history() - clear netif queue operation history |
| * @hdd_ctx: hdd context |
| * |
| * Return: none |
| */ |
| void wlan_hdd_clear_netif_queue_history(hdd_context_t *hdd_ctx) |
| { |
| hdd_adapter_t *adapter = NULL; |
| hdd_adapter_list_node_t *adapter_node = NULL, *next = NULL; |
| QDF_STATUS status; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| while (NULL != adapter_node && QDF_STATUS_SUCCESS == status) { |
| adapter = adapter_node->pAdapter; |
| |
| qdf_mem_zero(adapter->queue_oper_stats, |
| sizeof(adapter->queue_oper_stats)); |
| qdf_mem_zero(adapter->queue_oper_history, |
| sizeof(adapter->queue_oper_history)); |
| adapter->history_index = 0; |
| adapter->start_time = adapter->last_time = qdf_system_ticks(); |
| adapter->total_pause_time = 0; |
| adapter->total_unpause_time = 0; |
| status = hdd_get_next_adapter(hdd_ctx, adapter_node, &next); |
| adapter_node = next; |
| } |
| } |
| |
| /** |
| * hdd_11d_scan_done() - callback for 11d scan completion of flushing results |
| * @halHandle: Hal handle |
| * @pContext: Pointer to the context |
| * @sessionId: Session ID |
| * @scanId: Scan ID |
| * @status: Status |
| * |
| * This is the callback to be executed when 11d scan is completed to flush out |
| * the scan results |
| * |
| * 11d scan is done during driver load and is a passive scan on all |
| * channels supported by the device, 11d scans may find some APs on |
| * frequencies which are forbidden to be used in the regulatory domain |
| * the device is operating in. If these APs are notified to the supplicant |
| * it may try to connect to these APs, thus flush out all the scan results |
| * which are present in SME after 11d scan is done. |
| * |
| * Return: QDF_STATUS_SUCCESS |
| */ |
| static QDF_STATUS hdd_11d_scan_done(tHalHandle halHandle, void *pContext, |
| uint8_t sessionId, uint32_t scanId, |
| eCsrScanStatus status) |
| { |
| ENTER(); |
| |
| sme_scan_flush_result(halHandle); |
| |
| EXIT(); |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| #ifdef WLAN_FEATURE_OFFLOAD_PACKETS |
| /** |
| * hdd_init_offloaded_packets_ctx() - Initialize offload packets context |
| * @hdd_ctx: hdd global context |
| * |
| * Return: none |
| */ |
| static void hdd_init_offloaded_packets_ctx(hdd_context_t *hdd_ctx) |
| { |
| uint8_t i; |
| |
| mutex_init(&hdd_ctx->op_ctx.op_lock); |
| for (i = 0; i < MAXNUM_PERIODIC_TX_PTRNS; i++) { |
| hdd_ctx->op_ctx.op_table[i].request_id = MAX_REQUEST_ID; |
| hdd_ctx->op_ctx.op_table[i].pattern_id = i; |
| } |
| } |
| #else |
| static void hdd_init_offloaded_packets_ctx(hdd_context_t *hdd_ctx) |
| { |
| } |
| #endif |
| |
| #ifdef WLAN_FEATURE_WOW_PULSE |
| /** |
| * wlan_hdd_set_wow_pulse() - call SME to send wmi cmd of wow pulse |
| * @phddctx: hdd_context_t structure pointer |
| * @enable: enable or disable this behaviour |
| * |
| * Return: int |
| */ |
| static int wlan_hdd_set_wow_pulse(hdd_context_t *phddctx, bool enable) |
| { |
| struct hdd_config *pcfg_ini = phddctx->config; |
| struct wow_pulse_mode wow_pulse_set_info; |
| QDF_STATUS status; |
| |
| hdd_debug("wow pulse enable flag is %d", enable); |
| |
| if (false == phddctx->config->wow_pulse_support) |
| return 0; |
| |
| /* prepare the request to send to SME */ |
| if (enable == true) { |
| wow_pulse_set_info.wow_pulse_enable = true; |
| wow_pulse_set_info.wow_pulse_pin = |
| pcfg_ini->wow_pulse_pin; |
| wow_pulse_set_info.wow_pulse_interval_low = |
| pcfg_ini->wow_pulse_interval_low; |
| wow_pulse_set_info.wow_pulse_interval_high = |
| pcfg_ini->wow_pulse_interval_high; |
| } else { |
| wow_pulse_set_info.wow_pulse_enable = false; |
| wow_pulse_set_info.wow_pulse_pin = 0; |
| wow_pulse_set_info.wow_pulse_interval_low = 0; |
| wow_pulse_set_info.wow_pulse_interval_high = 0; |
| } |
| hdd_debug("enable %d pin %d low %d high %d", |
| wow_pulse_set_info.wow_pulse_enable, |
| wow_pulse_set_info.wow_pulse_pin, |
| wow_pulse_set_info.wow_pulse_interval_low, |
| wow_pulse_set_info.wow_pulse_interval_high); |
| |
| status = sme_set_wow_pulse(&wow_pulse_set_info); |
| if (QDF_STATUS_E_FAILURE == status) { |
| hdd_debug("sme_set_wow_pulse failure!"); |
| return -EIO; |
| } |
| hdd_debug("sme_set_wow_pulse success!"); |
| return 0; |
| } |
| #else |
| static inline int wlan_hdd_set_wow_pulse(hdd_context_t *phddctx, bool enable) |
| { |
| return 0; |
| } |
| #endif |
| |
| #ifdef WLAN_FEATURE_FASTPATH |
| /** |
| * hdd_enable_fastpath() - Enable fastpath if enabled in config INI |
| * @hdd_cfg: hdd config |
| * @context: lower layer context |
| * |
| * Return: none |
| */ |
| void hdd_enable_fastpath(struct hdd_config *hdd_cfg, |
| void *context) |
| { |
| if (hdd_cfg->fastpath_enable) |
| hif_enable_fastpath(context); |
| } |
| #endif |
| |
| #if defined(FEATURE_WLAN_CH_AVOID) |
| /** |
| * hdd_set_thermal_level_cb() - set thermal level callback function |
| * @context: hdd context pointer |
| * @level: thermal level |
| * |
| * Change IPA data path to SW path when the thermal throttle level greater |
| * than 0, and restore the original data path when throttle level is 0 |
| * |
| * Return: none |
| */ |
| static void hdd_set_thermal_level_cb(void *context, u_int8_t level) |
| { |
| hdd_context_t *hdd_ctx = context; |
| |
| /* Change IPA to SW path when throttle level greater than 0 */ |
| if (level > THROTTLE_LEVEL_0) |
| hdd_ipa_send_mcc_scc_msg(hdd_ctx, true); |
| else |
| /* restore original concurrency mode */ |
| hdd_ipa_send_mcc_scc_msg(hdd_ctx, hdd_ctx->mcc_mode); |
| } |
| |
| /** |
| * hdd_get_safe_channel_from_pcl_and_acs_range() - Get safe channel for SAP |
| * restart |
| * @adapter: AP adapter, which should be checked for NULL |
| * |
| * Get a safe channel to restart SAP. PCL already takes into account the |
| * unsafe channels. So, the PCL is validated with the ACS range to provide |
| * a safe channel for the SAP to restart. |
| * |
| * Return: Channel number to restart SAP in case of success. In case of any |
| * failure, the channel number returned is zero. |
| */ |
| static uint8_t hdd_get_safe_channel_from_pcl_and_acs_range( |
| hdd_adapter_t *adapter) |
| { |
| struct sir_pcl_list pcl; |
| QDF_STATUS status; |
| uint32_t i, j; |
| tHalHandle *hal_handle; |
| hdd_context_t *hdd_ctx; |
| bool found = false; |
| |
| hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| if (!hdd_ctx) { |
| hdd_err("invalid HDD context"); |
| return INVALID_CHANNEL_ID; |
| } |
| |
| hal_handle = WLAN_HDD_GET_HAL_CTX(adapter); |
| if (!hal_handle) { |
| hdd_err("invalid HAL handle"); |
| return INVALID_CHANNEL_ID; |
| } |
| |
| status = policy_mgr_get_pcl_for_existing_conn(hdd_ctx->hdd_psoc, |
| PM_SAP_MODE, pcl.pcl_list, &pcl.pcl_len, |
| pcl.weight_list, QDF_ARRAY_SIZE(pcl.weight_list)); |
| if (QDF_IS_STATUS_ERROR(status)) { |
| hdd_err("Get PCL failed"); |
| return INVALID_CHANNEL_ID; |
| } |
| |
| if (!pcl.pcl_len) { |
| hdd_err("pcl length is zero. this is not expected"); |
| return INVALID_CHANNEL_ID; |
| } |
| |
| hdd_debug("start:%d end:%d", |
| adapter->sessionCtx.ap.sapConfig.acs_cfg.start_ch, |
| adapter->sessionCtx.ap.sapConfig.acs_cfg.end_ch); |
| |
| /* PCL already takes unsafe channel into account */ |
| for (i = 0; i < pcl.pcl_len; i++) { |
| hdd_debug("chan[%d]:%d", i, pcl.pcl_list[i]); |
| if ((pcl.pcl_list[i] >= |
| adapter->sessionCtx.ap.sapConfig.acs_cfg.start_ch) && |
| (pcl.pcl_list[i] <= |
| adapter->sessionCtx.ap.sapConfig.acs_cfg.end_ch)) { |
| hdd_debug("found PCL safe chan:%d", pcl.pcl_list[i]); |
| return pcl.pcl_list[i]; |
| } |
| } |
| |
| hdd_debug("no safe channel from PCL found in ACS range"); |
| |
| /* Try for safe channel from all valid channel */ |
| pcl.pcl_len = MAX_NUM_CHAN; |
| status = sme_get_cfg_valid_channels(pcl.pcl_list, |
| &pcl.pcl_len); |
| if (QDF_IS_STATUS_ERROR(status)) { |
| hdd_err("error in getting valid channel list"); |
| return INVALID_CHANNEL_ID; |
| } |
| |
| for (i = 0; i < pcl.pcl_len; i++) { |
| hdd_debug("chan[%d]:%d", i, pcl.pcl_list[i]); |
| found = false; |
| for (j = 0; j < hdd_ctx->unsafe_channel_count; j++) { |
| if (pcl.pcl_list[i] == |
| hdd_ctx->unsafe_channel_list[j]) { |
| hdd_debug("unsafe chan:%d", pcl.pcl_list[i]); |
| found = true; |
| break; |
| } |
| } |
| |
| if (found) |
| continue; |
| |
| if ((pcl.pcl_list[i] >= |
| adapter->sessionCtx.ap.sapConfig.acs_cfg.start_ch) && |
| (pcl.pcl_list[i] <= |
| adapter->sessionCtx.ap.sapConfig.acs_cfg.end_ch)) { |
| hdd_debug("found safe chan:%d", pcl.pcl_list[i]); |
| return pcl.pcl_list[i]; |
| } |
| } |
| |
| return INVALID_CHANNEL_ID; |
| } |
| |
| /** |
| * hdd_switch_sap_channel() - Move SAP to the given channel |
| * @adapter: AP adapter |
| * @channel: Channel |
| * |
| * Moves the SAP interface by invoking the function which |
| * executes the callback to perform channel switch using (E)CSA. |
| * |
| * Return: None |
| */ |
| void hdd_switch_sap_channel(hdd_adapter_t *adapter, uint8_t channel) |
| { |
| hdd_ap_ctx_t *hdd_ap_ctx; |
| tHalHandle *hal_handle; |
| hdd_context_t *hdd_ctx; |
| |
| if (!adapter) { |
| hdd_err("invalid adapter"); |
| return; |
| } |
| |
| hdd_ap_ctx = WLAN_HDD_GET_AP_CTX_PTR(adapter); |
| |
| hal_handle = WLAN_HDD_GET_HAL_CTX(adapter); |
| if (!hal_handle) { |
| hdd_err("invalid HAL handle"); |
| return; |
| } |
| |
| hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| |
| hdd_ap_ctx->sapConfig.channel = channel; |
| hdd_ap_ctx->sapConfig.ch_params.ch_width = |
| hdd_ap_ctx->sapConfig.ch_width_orig; |
| |
| hdd_debug("chan:%d width:%d", |
| channel, hdd_ap_ctx->sapConfig.ch_width_orig); |
| |
| wlan_reg_set_channel_params(hdd_ctx->hdd_pdev, |
| hdd_ap_ctx->sapConfig.channel, |
| hdd_ap_ctx->sapConfig.sec_ch, |
| &hdd_ap_ctx->sapConfig.ch_params); |
| |
| policy_mgr_change_sap_channel_with_csa(hdd_ctx->hdd_psoc, |
| adapter->sessionId, channel, |
| hdd_ap_ctx->sapConfig.ch_width_orig); |
| } |
| |
| int hdd_update_acs_timer_reason(hdd_adapter_t *adapter, uint8_t reason) |
| { |
| struct hdd_external_acs_timer_context *timer_context; |
| |
| set_bit(VENDOR_ACS_RESPONSE_PENDING, &adapter->event_flags); |
| |
| if (QDF_TIMER_STATE_RUNNING == |
| qdf_mc_timer_get_current_state(&adapter->sessionCtx. |
| ap.vendor_acs_timer)) { |
| qdf_mc_timer_stop(&adapter->sessionCtx.ap.vendor_acs_timer); |
| } |
| timer_context = (struct hdd_external_acs_timer_context *) |
| adapter->sessionCtx.ap.vendor_acs_timer.user_data; |
| timer_context->reason = reason; |
| qdf_mc_timer_start(&adapter->sessionCtx.ap.vendor_acs_timer, |
| WLAN_VENDOR_ACS_WAIT_TIME); |
| /* Update config to application */ |
| hdd_cfg80211_update_acs_config(adapter, reason); |
| hdd_notice("Updated ACS config to nl with reason %d", reason); |
| |
| return 0; |
| } |
| |
| /** |
| * hdd_unsafe_channel_restart_sap() - restart sap if sap is on unsafe channel |
| * @hdd_ctx: hdd context pointer |
| * |
| * hdd_unsafe_channel_restart_sap check all unsafe channel list |
| * and if ACS is enabled, driver will ask userspace to restart the |
| * sap. User space on LTE coex indication restart driver. |
| * |
| * Return - none |
| */ |
| void hdd_unsafe_channel_restart_sap(hdd_context_t *hdd_ctxt) |
| { |
| QDF_STATUS status; |
| hdd_adapter_list_node_t *adapter_node = NULL, *next = NULL; |
| hdd_adapter_t *adapter_temp; |
| uint32_t i; |
| bool found = false; |
| uint8_t restart_chan; |
| |
| status = hdd_get_front_adapter(hdd_ctxt, &adapter_node); |
| while (NULL != adapter_node && QDF_STATUS_SUCCESS == status) { |
| adapter_temp = adapter_node->pAdapter; |
| |
| if (!adapter_temp) { |
| hdd_err("adapter is NULL, moving to next one"); |
| goto next_adapater; |
| } |
| |
| if (!((adapter_temp->device_mode == QDF_SAP_MODE) && |
| (adapter_temp->sessionCtx.ap.sapConfig.acs_cfg.acs_mode))) { |
| hdd_debug("skip device mode:%d acs:%d", |
| adapter_temp->device_mode, |
| adapter_temp->sessionCtx.ap.sapConfig. |
| acs_cfg.acs_mode); |
| goto next_adapater; |
| } |
| |
| found = false; |
| for (i = 0; i < hdd_ctxt->unsafe_channel_count; i++) { |
| if (adapter_temp->sessionCtx.ap.operatingChannel == |
| hdd_ctxt->unsafe_channel_list[i]) { |
| found = true; |
| hdd_debug("operating ch:%d is unsafe", |
| adapter_temp->sessionCtx.ap.operatingChannel); |
| break; |
| } |
| } |
| |
| if (!found) { |
| hdd_debug("ch:%d is safe. no need to change channel", |
| adapter_temp->sessionCtx.ap.operatingChannel); |
| goto next_adapater; |
| } |
| |
| if (hdd_ctxt->config->vendor_acs_support && |
| hdd_ctxt->config->acs_support_for_dfs_ltecoex) { |
| hdd_update_acs_timer_reason(adapter_temp, |
| QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX); |
| goto next_adapater; |
| } else |
| restart_chan = |
| hdd_get_safe_channel_from_pcl_and_acs_range( |
| adapter_temp); |
| if (!restart_chan) { |
| hdd_err("fail to restart SAP"); |
| } else { |
| /* |
| * SAP restart due to unsafe channel. While |
| * restarting the SAP, make sure to clear |
| * acs_channel, channel to reset to |
| * 0. Otherwise these settings will override |
| * the ACS while restart. |
| */ |
| hdd_ctxt->acs_policy.acs_channel = AUTO_CHANNEL_SELECT; |
| adapter_temp->sessionCtx.ap.sapConfig.channel = |
| AUTO_CHANNEL_SELECT; |
| hdd_debug("sending coex indication"); |
| wlan_hdd_send_svc_nlink_msg(hdd_ctxt->radio_index, |
| WLAN_SVC_LTE_COEX_IND, NULL, 0); |
| hdd_switch_sap_channel(adapter_temp, restart_chan); |
| } |
| |
| next_adapater: |
| status = hdd_get_next_adapter(hdd_ctxt, adapter_node, &next); |
| adapter_node = next; |
| } |
| } |
| |
| /** |
| * hdd_ch_avoid_cb() - Avoid notified channels from FW handler |
| * @adapter: HDD adapter pointer |
| * @indParam: Channel avoid notification parameter |
| * |
| * Avoid channel notification from FW handler. |
| * FW will send un-safe channel list to avoid over wrapping. |
| * hostapd should not use notified channel |
| * |
| * Return: None |
| */ |
| void hdd_ch_avoid_cb(void *hdd_context, void *indi_param) |
| { |
| hdd_context_t *hdd_ctxt; |
| tSirChAvoidIndType *ch_avoid_indi; |
| uint8_t range_loop; |
| enum channel_enum channel_loop, start_channel_idx = INVALID_CHANNEL, |
| end_channel_idx = INVALID_CHANNEL; |
| uint16_t start_channel; |
| uint16_t end_channel; |
| v_CONTEXT_t cds_context; |
| tHddAvoidFreqList hdd_avoid_freq_list; |
| uint32_t i; |
| |
| /* Basic sanity */ |
| if (!hdd_context || !indi_param) { |
| hdd_err("Invalid arguments"); |
| return; |
| } |
| |
| hdd_ctxt = (hdd_context_t *) hdd_context; |
| ch_avoid_indi = (tSirChAvoidIndType *) indi_param; |
| cds_context = hdd_ctxt->pcds_context; |
| |
| /* Make unsafe channel list */ |
| hdd_debug("band count %d", |
| ch_avoid_indi->avoid_range_count); |
| |
| /* generate vendor specific event */ |
| qdf_mem_zero((void *)&hdd_avoid_freq_list, sizeof(tHddAvoidFreqList)); |
| for (i = 0; i < ch_avoid_indi->avoid_range_count; i++) { |
| hdd_avoid_freq_list.avoidFreqRange[i].startFreq = |
| ch_avoid_indi->avoid_freq_range[i].start_freq; |
| hdd_avoid_freq_list.avoidFreqRange[i].endFreq = |
| ch_avoid_indi->avoid_freq_range[i].end_freq; |
| } |
| hdd_avoid_freq_list.avoidFreqRangeCount = |
| ch_avoid_indi->avoid_range_count; |
| |
| mutex_lock(&hdd_ctxt->avoid_freq_lock); |
| hdd_ctxt->coex_avoid_freq_list = hdd_avoid_freq_list; |
| mutex_unlock(&hdd_ctxt->avoid_freq_lock); |
| |
| /* clear existing unsafe channel cache */ |
| hdd_ctxt->unsafe_channel_count = 0; |
| qdf_mem_zero(hdd_ctxt->unsafe_channel_list, |
| sizeof(hdd_ctxt->unsafe_channel_list)); |
| |
| for (range_loop = 0; range_loop < ch_avoid_indi->avoid_range_count; |
| range_loop++) { |
| if (hdd_ctxt->unsafe_channel_count >= NUM_CHANNELS) { |
| hdd_warn("LTE Coex unsafe channel list full"); |
| break; |
| } |
| |
| start_channel = ieee80211_frequency_to_channel( |
| ch_avoid_indi->avoid_freq_range[range_loop].start_freq); |
| end_channel = ieee80211_frequency_to_channel( |
| ch_avoid_indi->avoid_freq_range[range_loop].end_freq); |
| hdd_debug("start %d : %d, end %d : %d", |
| ch_avoid_indi->avoid_freq_range[range_loop].start_freq, |
| start_channel, |
| ch_avoid_indi->avoid_freq_range[range_loop].end_freq, |
| end_channel); |
| |
| /* do not process frequency bands that are not mapped to |
| * predefined channels |
| */ |
| if (start_channel == 0 || end_channel == 0) |
| continue; |
| |
| for (channel_loop = CHAN_ENUM_1; channel_loop <= |
| CHAN_ENUM_184; channel_loop++) { |
| if (WLAN_REG_CH_TO_FREQ(channel_loop) >= |
| ch_avoid_indi->avoid_freq_range[ |
| range_loop].start_freq) { |
| start_channel_idx = channel_loop; |
| break; |
| } |
| } |
| for (channel_loop = CHAN_ENUM_1; channel_loop <= |
| CHAN_ENUM_184; channel_loop++) { |
| if (WLAN_REG_CH_TO_FREQ(channel_loop) >= |
| ch_avoid_indi->avoid_freq_range[ |
| range_loop].end_freq) { |
| end_channel_idx = channel_loop; |
| if (WLAN_REG_CH_TO_FREQ(channel_loop) > |
| ch_avoid_indi->avoid_freq_range[ |
| range_loop].end_freq) |
| end_channel_idx--; |
| break; |
| } |
| } |
| |
| if (start_channel_idx == INVALID_CHANNEL || |
| end_channel_idx == INVALID_CHANNEL) |
| continue; |
| |
| for (channel_loop = start_channel_idx; channel_loop <= |
| end_channel_idx; channel_loop++) { |
| hdd_ctxt->unsafe_channel_list[ |
| hdd_ctxt->unsafe_channel_count++] = |
| WLAN_REG_CH_NUM(channel_loop); |
| if (hdd_ctxt->unsafe_channel_count >= |
| NUM_CHANNELS) { |
| hdd_warn("LTECoex unsafe ch list full"); |
| break; |
| } |
| } |
| } |
| |
| hdd_debug("number of unsafe channels is %d ", |
| hdd_ctxt->unsafe_channel_count); |
| |
| if (pld_set_wlan_unsafe_channel(hdd_ctxt->parent_dev, |
| hdd_ctxt->unsafe_channel_list, |
| hdd_ctxt->unsafe_channel_count)) { |
| hdd_err("Failed to set unsafe channel"); |
| |
| /* clear existing unsafe channel cache */ |
| hdd_ctxt->unsafe_channel_count = 0; |
| qdf_mem_zero(hdd_ctxt->unsafe_channel_list, |
| sizeof(hdd_ctxt->unsafe_channel_list)); |
| |
| return; |
| } |
| |
| for (channel_loop = 0; |
| channel_loop < hdd_ctxt->unsafe_channel_count; channel_loop++) { |
| hdd_debug("channel %d is not safe ", |
| hdd_ctxt->unsafe_channel_list[channel_loop]); |
| } |
| |
| mutex_lock(&hdd_ctxt->avoid_freq_lock); |
| if (hdd_ctxt->dnbs_avoid_freq_list.avoidFreqRangeCount) |
| if (wlan_hdd_merge_avoid_freqs(&hdd_avoid_freq_list, |
| &hdd_ctxt->dnbs_avoid_freq_list)) { |
| mutex_unlock(&hdd_ctxt->avoid_freq_lock); |
| hdd_debug("unable to merge avoid freqs"); |
| return; |
| } |
| mutex_unlock(&hdd_ctxt->avoid_freq_lock); |
| /* |
| * first update the unsafe channel list to the platform driver and |
| * send the avoid freq event to the application |
| */ |
| wlan_hdd_send_avoid_freq_event(hdd_ctxt, &hdd_avoid_freq_list); |
| |
| if (!hdd_ctxt->unsafe_channel_count) { |
| hdd_debug("no unsafe channels - not restarting SAP"); |
| return; |
| } |
| hdd_unsafe_channel_restart_sap(hdd_ctxt); |
| } |
| |
| /** |
| * hdd_init_channel_avoidance() - Initialize channel avoidance |
| * @hdd_ctx: HDD global context |
| * |
| * Initialize the channel avoidance logic by retrieving the unsafe |
| * channel list from the platform driver and plumbing the data |
| * down to the lower layers. Then subscribe to subsequent channel |
| * avoidance events. |
| * |
| * Return: None |
| */ |
| static void hdd_init_channel_avoidance(hdd_context_t *hdd_ctx) |
| { |
| uint16_t unsafe_channel_count; |
| int index; |
| |
| pld_get_wlan_unsafe_channel(hdd_ctx->parent_dev, |
| hdd_ctx->unsafe_channel_list, |
| &(hdd_ctx->unsafe_channel_count), |
| sizeof(uint16_t) * NUM_CHANNELS); |
| |
| hdd_debug("num of unsafe channels is %d", |
| hdd_ctx->unsafe_channel_count); |
| |
| unsafe_channel_count = QDF_MIN((uint16_t)hdd_ctx->unsafe_channel_count, |
| (uint16_t)NUM_CHANNELS); |
| |
| for (index = 0; index < unsafe_channel_count; index++) { |
| hdd_debug("channel %d is not safe", |
| hdd_ctx->unsafe_channel_list[index]); |
| |
| } |
| |
| /* Plug in avoid channel notification callback */ |
| sme_add_ch_avoid_callback(hdd_ctx->hHal, hdd_ch_avoid_cb); |
| } |
| #else |
| static void hdd_init_channel_avoidance(hdd_context_t *hdd_ctx) |
| { |
| } |
| static void hdd_set_thermal_level_cb(void *context, u_int8_t level) |
| { |
| } |
| #endif /* defined(FEATURE_WLAN_CH_AVOID) */ |
| |
| /** |
| * hdd_indicate_mgmt_frame() - Wrapper to indicate management frame to |
| * user space |
| * @frame_ind: Management frame data to be informed. |
| * |
| * This function is used to indicate management frame to |
| * user space |
| * |
| * Return: None |
| * |
| */ |
| void hdd_indicate_mgmt_frame(tSirSmeMgmtFrameInd *frame_ind) |
| { |
| hdd_context_t *hdd_ctx = NULL; |
| hdd_adapter_t *adapter = NULL; |
| void *cds_context = NULL; |
| int i; |
| |
| /* Get the global VOSS context.*/ |
| cds_context = cds_get_global_context(); |
| if (!cds_context) { |
| hdd_err("Global CDS context is Null"); |
| return; |
| } |
| /* Get the HDD context.*/ |
| hdd_ctx = (hdd_context_t *)cds_get_context(QDF_MODULE_ID_HDD); |
| |
| if (0 != wlan_hdd_validate_context(hdd_ctx)) |
| return; |
| |
| if (SME_SESSION_ID_ANY == frame_ind->sessionId) { |
| for (i = 0; i < CSR_ROAM_SESSION_MAX; i++) { |
| adapter = |
| hdd_get_adapter_by_sme_session_id(hdd_ctx, i); |
| if (adapter) |
| break; |
| } |
| } else { |
| adapter = hdd_get_adapter_by_sme_session_id(hdd_ctx, |
| frame_ind->sessionId); |
| } |
| |
| if ((NULL != adapter) && |
| (WLAN_HDD_ADAPTER_MAGIC == adapter->magic)) |
| __hdd_indicate_mgmt_frame(adapter, |
| frame_ind->frame_len, |
| frame_ind->frameBuf, |
| frame_ind->frameType, |
| frame_ind->rxChan, |
| frame_ind->rxRssi); |
| } |
| |
| static void hdd_lte_coex_restart_sap(hdd_adapter_t *adapter, |
| hdd_context_t *hdd_ctx) |
| { |
| uint8_t restart_chan = 0; |
| |
| restart_chan = |
| hdd_get_safe_channel_from_pcl_and_acs_range(adapter); |
| if (!restart_chan) { |
| hdd_alert("fail to restart SAP"); |
| } else { |
| /* SAP restart due to unsafe channel. While restarting |
| * the SAP, make sure to clear acs_channel, channel to |
| * reset to 0. Otherwise these settings will override |
| * the ACS while restart. |
| */ |
| hdd_ctx->acs_policy.acs_channel = AUTO_CHANNEL_SELECT; |
| adapter->sessionCtx.ap.sapConfig.channel = |
| AUTO_CHANNEL_SELECT; |
| hdd_info("sending coex indication"); |
| wlan_hdd_send_svc_nlink_msg(hdd_ctx->radio_index, |
| WLAN_SVC_LTE_COEX_IND, NULL, 0); |
| hdd_switch_sap_channel(adapter, restart_chan); |
| } |
| } |
| |
| void hdd_acs_response_timeout_handler(void *context) |
| { |
| struct hdd_external_acs_timer_context *timer_context = |
| (struct hdd_external_acs_timer_context *)context; |
| hdd_adapter_t *adapter; |
| hdd_context_t *hdd_ctx; |
| uint8_t reason; |
| |
| ENTER(); |
| if (!timer_context) { |
| hdd_err("invlaid timer context"); |
| return; |
| } |
| adapter = timer_context->adapter; |
| reason = timer_context->reason; |
| |
| |
| if ((!adapter) || |
| (adapter->magic != WLAN_HDD_ADAPTER_MAGIC)) { |
| hdd_err("invalid adapter or adapter has invalid magic"); |
| return; |
| } |
| hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| if (wlan_hdd_validate_context(hdd_ctx)) |
| return; |
| |
| if (test_bit(VENDOR_ACS_RESPONSE_PENDING, &adapter->event_flags)) |
| clear_bit(VENDOR_ACS_RESPONSE_PENDING, &adapter->event_flags); |
| else |
| return; |
| |
| hdd_err("ACS timeout happened for %s reason %d", |
| adapter->dev->name, reason); |
| switch (reason) { |
| /* SAP init case */ |
| case QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT: |
| wlan_sap_set_vendor_acs(WLAN_HDD_GET_SAP_CTX_PTR(adapter), |
| false); |
| wlan_hdd_cfg80211_start_acs(adapter); |
| break; |
| /* DFS detected on current channel */ |
| case QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS: |
| wlan_sap_update_next_channel( |
| WLAN_HDD_GET_SAP_CTX_PTR(adapter), 0, 0); |
| sme_update_new_channel_event(WLAN_HDD_GET_HAL_CTX(adapter), |
| adapter->sessionId); |
| break; |
| /* LTE coex event on current channel */ |
| case QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX: |
| hdd_lte_coex_restart_sap(adapter, hdd_ctx); |
| break; |
| default: |
| hdd_info("invalid reason for timer invoke"); |
| |
| } |
| } |
| |
| /** |
| * wlan_hdd_disable_all_dual_mac_features() - Disable dual mac features |
| * @hdd_ctx: HDD context |
| * |
| * Disables all the dual mac features like DBS, Agile DFS etc. |
| * |
| * Return: QDF_STATUS_SUCCESS on success |
| */ |
| static QDF_STATUS wlan_hdd_disable_all_dual_mac_features(hdd_context_t *hdd_ctx) |
| { |
| struct policy_mgr_dual_mac_config cfg = {0}; |
| QDF_STATUS status; |
| |
| if (!hdd_ctx) { |
| hdd_err("HDD context is NULL"); |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| cfg.scan_config = 0; |
| cfg.fw_mode_config = 0; |
| cfg.set_dual_mac_cb = policy_mgr_soc_set_dual_mac_cfg_cb; |
| |
| hdd_debug("Disabling all dual mac features..."); |
| |
| status = sme_soc_set_dual_mac_config(cfg); |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("sme_soc_set_dual_mac_config failed %d", status); |
| return status; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * hdd_override_ini_config - Override INI config |
| * @hdd_ctx: HDD context |
| * |
| * Override INI config based on module parameter. |
| * |
| * Return: None |
| */ |
| static void hdd_override_ini_config(hdd_context_t *hdd_ctx) |
| { |
| |
| if (0 == enable_dfs_chan_scan || 1 == enable_dfs_chan_scan) { |
| hdd_ctx->config->enableDFSChnlScan = enable_dfs_chan_scan; |
| hdd_debug("Module enable_dfs_chan_scan set to %d", |
| enable_dfs_chan_scan); |
| } |
| if (0 == enable_11d || 1 == enable_11d) { |
| hdd_ctx->config->Is11dSupportEnabled = enable_11d; |
| hdd_debug("Module enable_11d set to %d", enable_11d); |
| } |
| |
| if (!hdd_ipa_is_present(hdd_ctx)) |
| hdd_ctx->config->IpaConfig = 0; |
| } |
| |
| /** |
| * hdd_set_trace_level_for_each - Set trace level for each INI config |
| * @hdd_ctx - HDD context |
| * |
| * Set trace level for each module based on INI config. |
| * |
| * Return: None |
| */ |
| static void hdd_set_trace_level_for_each(hdd_context_t *hdd_ctx) |
| { |
| hdd_qdf_trace_enable(QDF_MODULE_ID_WMI, |
| hdd_ctx->config->qdf_trace_enable_wdi); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_HDD, |
| hdd_ctx->config->qdf_trace_enable_hdd); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_SME, |
| hdd_ctx->config->qdf_trace_enable_sme); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_PE, |
| hdd_ctx->config->qdf_trace_enable_pe); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_WMA, |
| hdd_ctx->config->qdf_trace_enable_wma); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_SYS, |
| hdd_ctx->config->qdf_trace_enable_sys); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_QDF, |
| hdd_ctx->config->qdf_trace_enable_qdf); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_SAP, |
| hdd_ctx->config->qdf_trace_enable_sap); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_HDD_SOFTAP, |
| hdd_ctx->config->qdf_trace_enable_hdd_sap); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_BMI, |
| hdd_ctx->config->qdf_trace_enable_bmi); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_CFG, |
| hdd_ctx->config->qdf_trace_enable_cfg); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_EPPING, |
| hdd_ctx->config->qdf_trace_enable_epping); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_QDF_DEVICE, |
| hdd_ctx->config->qdf_trace_enable_qdf_devices); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_TXRX, |
| hdd_ctx->config->cfd_trace_enable_txrx); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_HTC, |
| hdd_ctx->config->qdf_trace_enable_htc); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_HIF, |
| hdd_ctx->config->qdf_trace_enable_hif); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_HDD_SAP_DATA, |
| hdd_ctx->config->qdf_trace_enable_hdd_sap_data); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_HDD_DATA, |
| hdd_ctx->config->qdf_trace_enable_hdd_data); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_WIFIPOS, |
| hdd_ctx->config->qdf_trace_enable_wifi_pos); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_NAN, |
| hdd_ctx->config->qdf_trace_enable_nan); |
| hdd_qdf_trace_enable(QDF_MODULE_ID_REGULATORY, |
| hdd_ctx->config->qdf_trace_enable_regulatory); |
| |
| hdd_cfg_print(hdd_ctx); |
| } |
| |
| /** |
| * hdd_context_init() - Initialize HDD context |
| * @hdd_ctx: HDD context. |
| * |
| * Initialize HDD context along with all the feature specific contexts. |
| * |
| * return: 0 on success and errno on failure. |
| */ |
| static int hdd_context_init(hdd_context_t *hdd_ctx) |
| { |
| int ret; |
| |
| hdd_ctx->ioctl_scan_mode = eSIR_ACTIVE_SCAN; |
| hdd_ctx->max_intf_count = CSR_ROAM_SESSION_MAX; |
| |
| hdd_init_ll_stats_ctx(); |
| |
| init_completion(&hdd_ctx->mc_sus_event_var); |
| init_completion(&hdd_ctx->ready_to_suspend); |
| |
| qdf_spinlock_create(&hdd_ctx->connection_status_lock); |
| qdf_spinlock_create(&hdd_ctx->sta_update_info_lock); |
| qdf_spinlock_create(&hdd_ctx->hdd_adapter_lock); |
| |
| qdf_list_create(&hdd_ctx->hddAdapters, MAX_NUMBER_OF_ADAPTERS); |
| |
| init_completion(&hdd_ctx->set_antenna_mode_cmpl); |
| |
| ret = hdd_scan_context_init(hdd_ctx); |
| if (ret) |
| goto list_destroy; |
| |
| hdd_tdls_context_init(hdd_ctx, false); |
| |
| hdd_rx_wake_lock_create(hdd_ctx); |
| |
| ret = hdd_sap_context_init(hdd_ctx); |
| if (ret) |
| goto scan_destroy; |
| |
| ret = hdd_roc_context_init(hdd_ctx); |
| if (ret) |
| goto sap_destroy; |
| |
| wlan_hdd_cfg80211_extscan_init(hdd_ctx); |
| |
| hdd_init_offloaded_packets_ctx(hdd_ctx); |
| |
| ret = wlan_hdd_cfg80211_init(hdd_ctx->parent_dev, hdd_ctx->wiphy, |
| hdd_ctx->config); |
| if (ret) |
| goto roc_destroy; |
| |
| return 0; |
| |
| roc_destroy: |
| hdd_roc_context_destroy(hdd_ctx); |
| |
| sap_destroy: |
| hdd_sap_context_destroy(hdd_ctx); |
| |
| scan_destroy: |
| hdd_scan_context_destroy(hdd_ctx); |
| hdd_rx_wake_lock_destroy(hdd_ctx); |
| hdd_tdls_context_destroy(hdd_ctx); |
| list_destroy: |
| qdf_list_destroy(&hdd_ctx->hddAdapters); |
| |
| return ret; |
| } |
| |
| /** |
| * hdd_context_create() - Allocate and inialize HDD context. |
| * @dev: Device Pointer to the underlying device |
| * |
| * Allocate and initialize HDD context. HDD context is allocated as part of |
| * wiphy allocation and then context is initialized. |
| * |
| * Return: HDD context on success and ERR_PTR on failure |
| */ |
| static hdd_context_t *hdd_context_create(struct device *dev) |
| { |
| QDF_STATUS status; |
| int ret = 0; |
| hdd_context_t *hdd_ctx; |
| v_CONTEXT_t p_cds_context; |
| int qdf_print_idx = -1; |
| |
| struct category_info cinfo[MAX_SUPPORTED_CATEGORY] = { |
| [QDF_MODULE_ID_TLSHIM] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_WMI] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_HTT] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_HDD] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_SME] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_PE] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_WMA] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_SYS] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_QDF] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_SAP] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_HDD_SOFTAP] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_HDD_DATA] = {QDF_DATA_PATH_TRACE_LEVEL}, |
| [QDF_MODULE_ID_HDD_SAP_DATA] = {QDF_DATA_PATH_TRACE_LEVEL}, |
| [QDF_MODULE_ID_HIF] = {QDF_DATA_PATH_TRACE_LEVEL}, |
| [QDF_MODULE_ID_HTC] = {QDF_DATA_PATH_TRACE_LEVEL}, |
| [QDF_MODULE_ID_TXRX] = {QDF_DATA_PATH_TRACE_LEVEL}, |
| [QDF_MODULE_ID_QDF_DEVICE] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_CFG] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_BMI] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_EPPING] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_QVIT] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_DP] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_SOC] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_OS_IF] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_TARGET_IF] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_SCHEDULER] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_MGMT_TXRX] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_PMO] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_SCAN] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_POLICY_MGR] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_P2P] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_TDLS] = {QDF_TRACE_LEVEL_ALL}, |
| [QDF_MODULE_ID_REGULATORY] = {QDF_TRACE_LEVEL_ALL}, |
| }; |
| |
| status = qdf_print_setup(); |
| if (status != QDF_STATUS_SUCCESS) { |
| pr_err("QDF print control object setup failed\n"); |
| ret = -EINVAL; |
| goto err_out; |
| } |
| /* Register the module here with QDF */ |
| qdf_print_idx = qdf_print_ctrl_register(cinfo, NULL, NULL, |
| "MCL_WLAN"); |
| |
| /* if qdf_print_idx is negative */ |
| if (qdf_print_idx < 0) { |
| pr_err("QDF print control can not be registered %d\n", |
| qdf_print_idx); |
| ret = -EINVAL; |
| goto err_out; |
| } |
| |
| /* Store the qdf_pidx information into qdf module */ |
| qdf_set_pidx(qdf_print_idx); |
| |
| ENTER(); |
| |
| p_cds_context = cds_get_global_context(); |
| if (p_cds_context == NULL) { |
| hdd_err("Failed to get CDS global context"); |
| ret = -EINVAL; |
| goto err_out; |
| } |
| |
| hdd_ctx = hdd_cfg80211_wiphy_alloc(sizeof(hdd_context_t)); |
| |
| if (hdd_ctx == NULL) { |
| ret = -ENOMEM; |
| goto err_out; |
| } |
| |
| hdd_ctx->pcds_context = p_cds_context; |
| hdd_ctx->parent_dev = dev; |
| hdd_ctx->last_scan_reject_session_id = 0xFF; |
| |
| hdd_ctx->config = qdf_mem_malloc(sizeof(struct hdd_config)); |
| if (hdd_ctx->config == NULL) { |
| hdd_err("Failed to alloc memory for HDD config!"); |
| ret = -ENOMEM; |
| goto err_free_hdd_context; |
| } |
| |
| /* Read and parse the qcom_cfg.ini file */ |
| status = hdd_parse_config_ini(hdd_ctx); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_err("Error (status: %d) parsing INI file: %s", status, |
| WLAN_INI_FILE); |
| ret = -EINVAL; |
| goto err_free_config; |
| } |
| |
| hdd_debug("setting timer multiplier: %u", |
| hdd_ctx->config->timer_multiplier); |
| qdf_timer_set_multiplier(hdd_ctx->config->timer_multiplier); |
| |
| hdd_debug("Setting configuredMcastBcastFilter: %d", |
| hdd_ctx->config->mcastBcastFilterSetting); |
| |
| if (hdd_ctx->config->fhostNSOffload) |
| hdd_ctx->ns_offload_enable = true; |
| |
| cds_set_fatal_event(hdd_ctx->config->enable_fatal_event); |
| |
| hdd_override_ini_config(hdd_ctx); |
| |
| ((cds_context_type *) (p_cds_context))->pHDDContext = (void *)hdd_ctx; |
| |
| ret = hdd_context_init(hdd_ctx); |
| |
| if (ret) |
| goto err_free_config; |
| |
| |
| ret = pld_set_fw_log_mode(hdd_ctx->parent_dev, |
| hdd_ctx->config->enable_fw_log); |
| |
| if (ret && cds_is_fw_down()) |
| goto err_deinit_hdd_context; |
| |
| /* Uses to enabled logging after SSR */ |
| hdd_ctx->fw_log_settings.enable = hdd_ctx->config->enable_fw_log; |
| |
| if (QDF_GLOBAL_FTM_MODE == hdd_get_conparam()) |
| goto skip_multicast_logging; |
| |
| cds_set_multicast_logging(hdd_ctx->config->multicast_host_fw_msgs); |
| |
| ret = wlan_hdd_init_tx_rx_histogram(hdd_ctx); |
| if (ret) |
| goto err_deinit_hdd_context; |
| |
| ret = hdd_logging_sock_activate_svc(hdd_ctx); |
| if (ret) |
| goto err_free_histogram; |
| |
| skip_multicast_logging: |
| hdd_set_trace_level_for_each(hdd_ctx); |
| |
| return hdd_ctx; |
| |
| err_free_histogram: |
| wlan_hdd_deinit_tx_rx_histogram(hdd_ctx); |
| |
| err_deinit_hdd_context: |
| hdd_context_deinit(hdd_ctx); |
| |
| err_free_config: |
| qdf_mem_free(hdd_ctx->config); |
| |
| err_free_hdd_context: |
| wiphy_free(hdd_ctx->wiphy); |
| |
| err_out: |
| return ERR_PTR(ret); |
| } |
| |
| #ifdef WLAN_OPEN_P2P_INTERFACE |
| /** |
| * hdd_open_p2p_interface - Open P2P interface |
| * @hdd_ctx: HDD context |
| * @rtnl_held: True if RTNL lock held |
| * |
| * Open P2P interface during probe. This function called to open the P2P |
| * interface at probe along with STA interface. |
| * |
| * Return: 0 on success and errno on failure |
| */ |
| static int hdd_open_p2p_interface(hdd_context_t *hdd_ctx, bool rtnl_held) |
| { |
| hdd_adapter_t *adapter; |
| uint8_t *p2p_dev_addr; |
| |
| if (hdd_ctx->config->isP2pDeviceAddrAdministrated && |
| !(hdd_ctx->config->intfMacAddr[0].bytes[0] & 0x02)) { |
| qdf_mem_copy(hdd_ctx->p2pDeviceAddress.bytes, |
| hdd_ctx->config->intfMacAddr[0].bytes, |
| sizeof(tSirMacAddr)); |
| |
| /* |
| * Generate the P2P Device Address. This consists of |
| * the device's primary MAC address with the locally |
| * administered bit set. |
| */ |
| hdd_ctx->p2pDeviceAddress.bytes[0] |= 0x02; |
| } else { |
| p2p_dev_addr = wlan_hdd_get_intf_addr(hdd_ctx); |
| if (p2p_dev_addr == NULL) { |
| hdd_err("Failed to allocate mac_address for p2p_device"); |
| return -ENOSPC; |
| } |
| |
| qdf_mem_copy(&hdd_ctx->p2pDeviceAddress.bytes[0], p2p_dev_addr, |
| QDF_MAC_ADDR_SIZE); |
| } |
| |
| adapter = hdd_open_adapter(hdd_ctx, QDF_P2P_DEVICE_MODE, "p2p%d", |
| &hdd_ctx->p2pDeviceAddress.bytes[0], |
| NET_NAME_UNKNOWN, rtnl_held); |
| |
| if (NULL == adapter) { |
| hdd_err("Failed to do hdd_open_adapter for P2P Device Interface"); |
| return -ENOSPC; |
| } |
| |
| return 0; |
| } |
| #else |
| static inline int hdd_open_p2p_interface(hdd_context_t *hdd_ctx, |
| bool rtnl_held) |
| { |
| return 0; |
| } |
| #endif |
| |
| static int hdd_open_ocb_interface(hdd_context_t *hdd_ctx, bool rtnl_held) |
| { |
| hdd_adapter_t *adapter; |
| int ret = 0; |
| |
| adapter = hdd_open_adapter(hdd_ctx, QDF_OCB_MODE, "wlanocb%d", |
| wlan_hdd_get_intf_addr(hdd_ctx), |
| NET_NAME_UNKNOWN, rtnl_held); |
| if (adapter == NULL) { |
| hdd_err("Failed to open 802.11p interface"); |
| ret = -ENOSPC; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * hdd_start_station_adapter()- Start the Station Adapter |
| * @adapter: HDD adapter |
| * |
| * This function initializes the adapter for the station mode. |
| * |
| * Return: 0 on success or errno on failure. |
| */ |
| int hdd_start_station_adapter(hdd_adapter_t *adapter) |
| { |
| QDF_STATUS status; |
| |
| ENTER_DEV(adapter->dev); |
| |
| status = hdd_init_station_mode(adapter); |
| |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_err("Error Initializing station mode: %d", status); |
| return qdf_status_to_os_return(status); |
| } |
| |
| hdd_register_tx_flow_control(adapter, |
| hdd_tx_resume_timer_expired_handler, |
| hdd_tx_resume_cb); |
| |
| EXIT(); |
| return 0; |
| } |
| |
| /** |
| * hdd_start_ap_adapter()- Start AP Adapter |
| * @adapter: HDD adapter |
| * |
| * This function initializes the adapter for the AP mode. |
| * |
| * Return: 0 on success errno on failure. |
| */ |
| int hdd_start_ap_adapter(hdd_adapter_t *adapter) |
| { |
| QDF_STATUS status; |
| |
| ENTER(); |
| |
| status = hdd_init_ap_mode(adapter, false); |
| |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_err("Error Initializing the AP mode: %d", status); |
| return qdf_status_to_os_return(status); |
| } |
| |
| hdd_register_tx_flow_control(adapter, |
| hdd_softap_tx_resume_timer_expired_handler, |
| hdd_softap_tx_resume_cb); |
| |
| EXIT(); |
| return 0; |
| } |
| |
| /** |
| * hdd_start_ftm_adapter()- Start FTM adapter |
| * @adapter: HDD adapter |
| * |
| * This function initializes the adapter for the FTM mode. |
| * |
| * Return: 0 on success or errno on failure. |
| */ |
| int hdd_start_ftm_adapter(hdd_adapter_t *adapter) |
| { |
| QDF_STATUS qdf_status; |
| |
| ENTER_DEV(adapter->dev); |
| |
| qdf_status = hdd_init_tx_rx(adapter); |
| |
| if (QDF_STATUS_SUCCESS != qdf_status) { |
| hdd_err("Failed to start FTM adapter: %d", qdf_status); |
| return qdf_status_to_os_return(qdf_status); |
| } |
| |
| return 0; |
| EXIT(); |
| } |
| |
| /** |
| * hdd_open_interfaces - Open all required interfaces |
| * hdd_ctx: HDD context |
| * rtnl_held: True if RTNL lock is held |
| * |
| * Open all the interfaces like STA, P2P and OCB based on the configuration. |
| * |
| * Return: 0 if all interfaces were created, otherwise negative errno |
| */ |
| static int hdd_open_interfaces(hdd_context_t *hdd_ctx, bool rtnl_held) |
| { |
| hdd_adapter_t *adapter; |
| int ret; |
| |
| if (hdd_ctx->config->dot11p_mode == WLAN_HDD_11P_STANDALONE) |
| /* Create only 802.11p interface */ |
| return hdd_open_ocb_interface(hdd_ctx, rtnl_held); |
| |
| adapter = hdd_open_adapter(hdd_ctx, QDF_STA_MODE, "wlan%d", |
| wlan_hdd_get_intf_addr(hdd_ctx), |
| NET_NAME_UNKNOWN, rtnl_held); |
| |
| if (adapter == NULL) |
| return -ENOSPC; |
| |
| /* fast roaming is allowed only on first STA, i.e. wlan adapter */ |
| adapter->fast_roaming_allowed = true; |
| |
| ret = hdd_open_p2p_interface(hdd_ctx, rtnl_held); |
| if (ret) |
| goto err_close_adapters; |
| |
| /* Open 802.11p Interface */ |
| if (hdd_ctx->config->dot11p_mode == WLAN_HDD_11P_CONCURRENT) { |
| ret = hdd_open_ocb_interface(hdd_ctx, rtnl_held); |
| if (ret) |
| goto err_close_adapters; |
| } |
| |
| return 0; |
| |
| err_close_adapters: |
| hdd_close_all_adapters(hdd_ctx, rtnl_held); |
| return ret; |
| } |
| |
| /** |
| * hdd_update_country_code - Update country code |
| * @hdd_ctx: HDD context |
| * |
| * Update country code based on module parameter country_code |
| * |
| * Return: 0 on success and errno on failure |
| */ |
| static int hdd_update_country_code(hdd_context_t *hdd_ctx) |
| { |
| if (!country_code) |
| return 0; |
| |
| return hdd_reg_set_country(hdd_ctx, country_code); |
| } |
| |
| #ifdef QCA_LL_TX_FLOW_CONTROL_V2 |
| /** |
| * hdd_txrx_populate_cds_config() - Populate txrx cds configuration |
| * @cds_cfg: CDS Configuration |
| * @hdd_ctx: Pointer to hdd context |
| * |
| * Return: none |
| */ |
| static inline void hdd_txrx_populate_cds_config(struct cds_config_info |
| *cds_cfg, |
| hdd_context_t *hdd_ctx) |
| { |
| cds_cfg->tx_flow_stop_queue_th = |
| hdd_ctx->config->TxFlowStopQueueThreshold; |
| cds_cfg->tx_flow_start_queue_offset = |
| hdd_ctx->config->TxFlowStartQueueOffset; |
| } |
| #else |
| static inline void hdd_txrx_populate_cds_config(struct cds_config_info |
| *cds_cfg, |
| hdd_context_t *hdd_ctx) |
| { |
| } |
| #endif |
| |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| /** |
| * hdd_ra_populate_cds_config() - Populate RA filtering cds configuration |
| * @cds_cfg: CDS Configuration |
| * @hdd_ctx: Pointer to hdd context |
| * |
| * Return: none |
| */ |
| static inline void hdd_ra_populate_cds_config(struct cds_config_info *cds_cfg, |
| hdd_context_t *hdd_ctx) |
| { |
| cds_cfg->ra_ratelimit_interval = |
| hdd_ctx->config->RArateLimitInterval; |
| cds_cfg->is_ra_ratelimit_enabled = |
| hdd_ctx->config->IsRArateLimitEnabled; |
| } |
| #else |
| static inline void hdd_ra_populate_cds_config(struct cds_config_info *cds_cfg, |
| hdd_context_t *hdd_ctx) |
| { |
| } |
| #endif |
| |
| /** |
| * hdd_update_cds_config() - API to update cds configuration parameters |
| * @hdd_ctx: HDD Context |
| * |
| * Return: 0 for Success, errno on failure |
| */ |
| static int hdd_update_cds_config(hdd_context_t *hdd_ctx) |
| { |
| struct cds_config_info *cds_cfg; |
| |
| cds_cfg = (struct cds_config_info *)qdf_mem_malloc(sizeof(*cds_cfg)); |
| if (!cds_cfg) { |
| hdd_err("failed to allocate cds config"); |
| return -ENOMEM; |
| } |
| |
| cds_cfg->driver_type = DRIVER_TYPE_PRODUCTION; |
| if (!hdd_ctx->config->nMaxPsPoll || |
| !hdd_ctx->config->enablePowersaveOffload) { |
| cds_cfg->powersave_offload_enabled = |
| hdd_ctx->config->enablePowersaveOffload; |
| } else { |
| if ((hdd_ctx->config->enablePowersaveOffload == |
| PS_QPOWER_NODEEPSLEEP) || |
| (hdd_ctx->config->enablePowersaveOffload == |
| PS_LEGACY_NODEEPSLEEP)) |
| cds_cfg->powersave_offload_enabled = |
| PS_LEGACY_NODEEPSLEEP; |
| else |
| cds_cfg->powersave_offload_enabled = |
| PS_LEGACY_DEEPSLEEP; |
| hdd_info("Qpower disabled in cds config, %d", |
| cds_cfg->powersave_offload_enabled); |
| } |
| cds_cfg->sta_dynamic_dtim = hdd_ctx->config->enableDynamicDTIM; |
| cds_cfg->sta_mod_dtim = hdd_ctx->config->enableModulatedDTIM; |
| cds_cfg->sta_maxlimod_dtim = hdd_ctx->config->fMaxLIModulatedDTIM; |
| cds_cfg->wow_enable = hdd_ctx->config->wowEnable; |
| cds_cfg->max_wow_filters = hdd_ctx->config->maxWoWFilters; |
| |
| /* Here ol_ini_info is used to store ini status of arp offload |
| * ns offload and others. Currently 1st bit is used for arp |
| * off load and 2nd bit for ns offload currently, rest bits are unused |
| */ |
| if (hdd_ctx->config->fhostArpOffload) |
| cds_cfg->ol_ini_info = cds_cfg->ol_ini_info | 0x1; |
| if (hdd_ctx->config->fhostNSOffload) |
| cds_cfg->ol_ini_info = cds_cfg->ol_ini_info | 0x2; |
| |
| /* |
| * Copy the DFS Phyerr Filtering Offload status. |
| * This parameter reflects the value of the |
| * dfs_phyerr_filter_offload flag as set in the ini. |
| */ |
| cds_cfg->dfs_phyerr_filter_offload = |
| hdd_ctx->config->fDfsPhyerrFilterOffload; |
| if (hdd_ctx->config->ssdp) |
| cds_cfg->ssdp = hdd_ctx->config->ssdp; |
| |
| cds_cfg->enable_mc_list = hdd_ctx->config->fEnableMCAddrList; |
| cds_cfg->ap_maxoffload_peers = hdd_ctx->config->apMaxOffloadPeers; |
| |
| cds_cfg->ap_maxoffload_reorderbuffs = |
| hdd_ctx->config->apMaxOffloadReorderBuffs; |
| |
| cds_cfg->ap_disable_intrabss_fwd = |
| hdd_ctx->config->apDisableIntraBssFwd; |
| |
| cds_cfg->dfs_pri_multiplier = |
| hdd_ctx->config->dfsRadarPriMultiplier; |
| cds_cfg->reorder_offload = |
| hdd_ctx->config->reorderOffloadSupport; |
| |
| /* IPA micro controller data path offload resource config item */ |
| cds_cfg->uc_offload_enabled = hdd_ipa_uc_is_enabled(hdd_ctx); |
| if (!is_power_of_2(hdd_ctx->config->IpaUcTxBufCount)) { |
| /* IpaUcTxBufCount should be power of 2 */ |
| hdd_debug("Round down IpaUcTxBufCount %d to nearest power of 2", |
| hdd_ctx->config->IpaUcTxBufCount); |
| hdd_ctx->config->IpaUcTxBufCount = |
| rounddown_pow_of_two( |
| hdd_ctx->config->IpaUcTxBufCount); |
| if (!hdd_ctx->config->IpaUcTxBufCount) { |
| hdd_err("Failed to round down IpaUcTxBufCount"); |
| return -EINVAL; |
| } |
| hdd_debug("IpaUcTxBufCount rounded down to %d", |
| hdd_ctx->config->IpaUcTxBufCount); |
| } |
| cds_cfg->uc_txbuf_count = hdd_ctx->config->IpaUcTxBufCount; |
| cds_cfg->uc_txbuf_size = hdd_ctx->config->IpaUcTxBufSize; |
| if (!is_power_of_2(hdd_ctx->config->IpaUcRxIndRingCount)) { |
| /* IpaUcRxIndRingCount should be power of 2 */ |
| hdd_debug("Round down IpaUcRxIndRingCount %d to nearest power of 2", |
| hdd_ctx->config->IpaUcRxIndRingCount); |
| hdd_ctx->config->IpaUcRxIndRingCount = |
| rounddown_pow_of_two( |
| hdd_ctx->config->IpaUcRxIndRingCount); |
| if (!hdd_ctx->config->IpaUcRxIndRingCount) { |
| hdd_err("Failed to round down IpaUcRxIndRingCount"); |
| return -EINVAL; |
| } |
| hdd_debug("IpaUcRxIndRingCount rounded down to %d", |
| hdd_ctx->config->IpaUcRxIndRingCount); |
| } |
| cds_cfg->uc_rxind_ringcount = |
| hdd_ctx->config->IpaUcRxIndRingCount; |
| cds_cfg->uc_tx_partition_base = |
| hdd_ctx->config->IpaUcTxPartitionBase; |
| cds_cfg->max_scan = hdd_ctx->config->max_scan_count; |
| |
| cds_cfg->ip_tcp_udp_checksum_offload = |
| hdd_ctx->config->enable_ip_tcp_udp_checksum_offload; |
| cds_cfg->enable_rxthread = hdd_ctx->enableRxThread; |
| cds_cfg->ce_classify_enabled = |
| hdd_ctx->config->ce_classify_enabled; |
| cds_cfg->bpf_packet_filter_enable = |
| hdd_ctx->config->bpf_packet_filter_enable; |
| cds_cfg->tx_chain_mask_cck = hdd_ctx->config->tx_chain_mask_cck; |
| cds_cfg->self_gen_frm_pwr = hdd_ctx->config->self_gen_frm_pwr; |
| cds_cfg->max_station = hdd_ctx->config->maxNumberOfPeers; |
| cds_cfg->sub_20_channel_width = WLAN_SUB_20_CH_WIDTH_NONE; |
| cds_cfg->flow_steering_enabled = hdd_ctx->config->flow_steering_enable; |
| cds_cfg->self_recovery_enabled = hdd_ctx->config->enableSelfRecovery; |
| cds_cfg->fw_timeout_crash = hdd_ctx->config->fw_timeout_crash; |
| cds_cfg->active_uc_bpf_mode = hdd_ctx->config->active_uc_bpf_mode; |
| cds_cfg->active_mc_bc_bpf_mode = hdd_ctx->config->active_mc_bc_bpf_mode; |
| |
| hdd_ra_populate_cds_config(cds_cfg, hdd_ctx); |
| hdd_txrx_populate_cds_config(cds_cfg, hdd_ctx); |
| hdd_nan_populate_cds_config(cds_cfg, hdd_ctx); |
| hdd_lpass_populate_cds_config(cds_cfg, hdd_ctx); |
| cds_init_ini_config(cds_cfg); |
| return 0; |
| } |
| |
| /** |
| * hdd_update_user_config() - API to update user configuration |
| * parameters to obj mgr which are used by multiple components |
| * @hdd_ctx: HDD Context |
| * |
| * Return: 0 for Success, errno on failure |
| */ |
| static int hdd_update_user_config(hdd_context_t *hdd_ctx) |
| { |
| struct wlan_objmgr_psoc_user_config *user_config; |
| |
| user_config = qdf_mem_malloc(sizeof(*user_config)); |
| if (user_config == NULL) { |
| hdd_alert("Failed to alloc memory for user_config!"); |
| return -ENOMEM; |
| } |
| |
| user_config->dot11_mode = hdd_ctx->config->dot11Mode; |
| user_config->dual_mac_feature_disable = |
| hdd_ctx->config->dual_mac_feature_disable; |
| user_config->indoor_channel_support = |
| hdd_ctx->config->indoor_channel_support; |
| user_config->is_11d_support_enabled = |
| hdd_ctx->config->Is11dSupportEnabled; |
| user_config->is_11h_support_enabled = |
| hdd_ctx->config->Is11hSupportEnabled; |
| user_config->optimize_chan_avoid_event = |
| hdd_ctx->config->goptimize_chan_avoid_event; |
| user_config->skip_dfs_chnl_in_p2p_search = |
| hdd_ctx->config->skipDfsChnlInP2pSearch; |
| user_config->band_capability = hdd_ctx->config->nBandCapability; |
| wlan_objmgr_psoc_set_user_config(hdd_ctx->hdd_psoc, user_config); |
| |
| qdf_mem_free(user_config); |
| return 0; |
| } |
| |
| /** |
| * hdd_init_thermal_info - Initialize thermal level |
| * @hdd_ctx: HDD context |
| * |
| * Initialize thermal level at SME layer and set the thermal level callback |
| * which would be called when a configured thermal threshold is hit. |
| * |
| * Return: 0 on success and errno on failure |
| */ |
| static int hdd_init_thermal_info(hdd_context_t *hdd_ctx) |
| { |
| tSmeThermalParams thermal_param; |
| QDF_STATUS status; |
| |
| thermal_param.smeThermalMgmtEnabled = |
| hdd_ctx->config->thermalMitigationEnable; |
| thermal_param.smeThrottlePeriod = hdd_ctx->config->throttlePeriod; |
| |
| thermal_param.sme_throttle_duty_cycle_tbl[0] = |
| hdd_ctx->config->throttle_dutycycle_level0; |
| thermal_param.sme_throttle_duty_cycle_tbl[1] = |
| hdd_ctx->config->throttle_dutycycle_level1; |
| thermal_param.sme_throttle_duty_cycle_tbl[2] = |
| hdd_ctx->config->throttle_dutycycle_level2; |
| thermal_param.sme_throttle_duty_cycle_tbl[3] = |
| hdd_ctx->config->throttle_dutycycle_level3; |
| |
| thermal_param.smeThermalLevels[0].smeMinTempThreshold = |
| hdd_ctx->config->thermalTempMinLevel0; |
| thermal_param.smeThermalLevels[0].smeMaxTempThreshold = |
| hdd_ctx->config->thermalTempMaxLevel0; |
| thermal_param.smeThermalLevels[1].smeMinTempThreshold = |
| hdd_ctx->config->thermalTempMinLevel1; |
| thermal_param.smeThermalLevels[1].smeMaxTempThreshold = |
| hdd_ctx->config->thermalTempMaxLevel1; |
| thermal_param.smeThermalLevels[2].smeMinTempThreshold = |
| hdd_ctx->config->thermalTempMinLevel2; |
| thermal_param.smeThermalLevels[2].smeMaxTempThreshold = |
| hdd_ctx->config->thermalTempMaxLevel2; |
| thermal_param.smeThermalLevels[3].smeMinTempThreshold = |
| hdd_ctx->config->thermalTempMinLevel3; |
| thermal_param.smeThermalLevels[3].smeMaxTempThreshold = |
| hdd_ctx->config->thermalTempMaxLevel3; |
| |
| status = sme_init_thermal_info(hdd_ctx->hHal, thermal_param); |
| |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| return qdf_status_to_os_return(status); |
| |
| sme_add_set_thermal_level_callback(hdd_ctx->hHal, |
| hdd_set_thermal_level_cb); |
| |
| return 0; |
| |
| } |
| |
| #if defined(CONFIG_HDD_INIT_WITH_RTNL_LOCK) |
| /** |
| * hdd_hold_rtnl_lock - Hold RTNL lock |
| * |
| * Hold RTNL lock |
| * |
| * Return: True if held and false otherwise |
| */ |
| static inline bool hdd_hold_rtnl_lock(void) |
| { |
| rtnl_lock(); |
| return true; |
| } |
| |
| /** |
| * hdd_release_rtnl_lock - Release RTNL lock |
| * |
| * Release RTNL lock |
| * |
| * Return: None |
| */ |
| static inline void hdd_release_rtnl_lock(void) |
| { |
| rtnl_unlock(); |
| } |
| #else |
| static inline bool hdd_hold_rtnl_lock(void) { return false; } |
| static inline void hdd_release_rtnl_lock(void) { } |
| #endif |
| |
| #if !defined(REMOVE_PKT_LOG) |
| |
| /* MAX iwpriv command support */ |
| #define PKTLOG_SET_BUFF_SIZE 3 |
| #define PKTLOG_CLEAR_BUFF 4 |
| #define MAX_PKTLOG_SIZE 16 |
| |
| /** |
| * hdd_pktlog_set_buff_size() - set pktlog buffer size |
| * @hdd_ctx: hdd context |
| * @set_value2: pktlog buffer size value |
| * |
| * |
| * Return: 0 for success or error. |
| */ |
| static int hdd_pktlog_set_buff_size(hdd_context_t *hdd_ctx, int set_value2) |
| { |
| struct sir_wifi_start_log start_log = { 0 }; |
| QDF_STATUS status; |
| |
| start_log.ring_id = RING_ID_PER_PACKET_STATS; |
| start_log.verbose_level = WLAN_LOG_LEVEL_OFF; |
| start_log.ini_triggered = cds_is_packet_log_enabled(); |
| start_log.user_triggered = 1; |
| start_log.size = set_value2; |
| start_log.is_pktlog_buff_clear = false; |
| |
| status = sme_wifi_start_logger(hdd_ctx->hHal, start_log); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("sme_wifi_start_logger failed(err=%d)", status); |
| EXIT(); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * hdd_pktlog_clear_buff() - clear pktlog buffer |
| * @hdd_ctx: hdd context |
| * |
| * Return: 0 for success or error. |
| */ |
| static int hdd_pktlog_clear_buff(hdd_context_t *hdd_ctx) |
| { |
| struct sir_wifi_start_log start_log; |
| QDF_STATUS status; |
| |
| start_log.ring_id = RING_ID_PER_PACKET_STATS; |
| start_log.verbose_level = WLAN_LOG_LEVEL_OFF; |
| start_log.ini_triggered = cds_is_packet_log_enabled(); |
| start_log.user_triggered = 1; |
| start_log.size = 0; |
| start_log.is_pktlog_buff_clear = true; |
| |
| status = sme_wifi_start_logger(hdd_ctx->hHal, start_log); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("sme_wifi_start_logger failed(err=%d)", status); |
| EXIT(); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * hdd_process_pktlog_command() - process pktlog command |
| * @hdd_ctx: hdd context |
| * @set_value: value set by user |
| * @set_value2: pktlog buffer size value |
| * |
| * This function process pktlog command. |
| * set_value2 only matters when set_value is 3 (set buff size) |
| * otherwise we ignore it. |
| * |
| * Return: 0 for success or error. |
| */ |
| int hdd_process_pktlog_command(hdd_context_t *hdd_ctx, uint32_t set_value, |
| int set_value2) |
| { |
| int ret; |
| bool enable; |
| uint8_t user_triggered = 0; |
| |
| ret = wlan_hdd_validate_context(hdd_ctx); |
| if (0 != ret) |
| return ret; |
| |
| hdd_debug("set pktlog %d, set size %d", set_value, set_value2); |
| |
| if (set_value > PKTLOG_CLEAR_BUFF) { |
| hdd_err("invalid pktlog value %d", set_value); |
| return -EINVAL; |
| } |
| |
| if (set_value == PKTLOG_SET_BUFF_SIZE) { |
| if (set_value2 <= 0) { |
| hdd_err("invalid pktlog size %d", set_value2); |
| return -EINVAL; |
| } else if (set_value2 > MAX_PKTLOG_SIZE) { |
| hdd_err("Pktlog buff size is too large. max value is 16MB.\n"); |
| return -EINVAL; |
| } |
| return hdd_pktlog_set_buff_size(hdd_ctx, set_value2); |
| } else if (set_value == PKTLOG_CLEAR_BUFF) { |
| return hdd_pktlog_clear_buff(hdd_ctx); |
| } |
| |
| /* |
| * set_value = 0 then disable packetlog |
| * set_value = 1 enable packetlog forcefully |
| * set_vlaue = 2 then disable packetlog if disabled through ini or |
| * enable packetlog with AUTO type. |
| */ |
| enable = ((set_value > 0) && cds_is_packet_log_enabled()) ? |
| true : false; |
| |
| if (1 == set_value) { |
| enable = true; |
| user_triggered = 1; |
| } |
| |
| return hdd_pktlog_enable_disable(hdd_ctx, enable, user_triggered, 0); |
| } |
| /** |
| * hdd_pktlog_enable_disable() - Enable/Disable packet logging |
| * @hdd_ctx: HDD context |
| * @enable: Flag to enable/disable |
| * @user_triggered: triggered through iwpriv |
| * @size: buffer size to be used for packetlog |
| * |
| * Return: 0 on success; error number otherwise |
| */ |
| int hdd_pktlog_enable_disable(hdd_context_t *hdd_ctx, bool enable, |
| uint8_t user_triggered, int size) |
| { |
| struct sir_wifi_start_log start_log; |
| QDF_STATUS status; |
| |
| start_log.ring_id = RING_ID_PER_PACKET_STATS; |
| start_log.verbose_level = |
| enable ? WLAN_LOG_LEVEL_ACTIVE : WLAN_LOG_LEVEL_OFF; |
| start_log.ini_triggered = cds_is_packet_log_enabled(); |
| start_log.user_triggered = user_triggered; |
| start_log.size = size; |
| start_log.is_pktlog_buff_clear = false; |
| /* |
| * Use "is_iwpriv_command" flag to distinguish iwpriv command from other |
| * commands. Host uses this flag to decide whether to send pktlog |
| * disable command to fw without sending pktlog enable command |
| * previously. For eg, If vendor sends pktlog disable command without |
| * sending pktlog enable command, then host discards the packet |
| * but for iwpriv command, host will send it to fw. |
| */ |
| start_log.is_iwpriv_command = 1; |
| status = sme_wifi_start_logger(hdd_ctx->hHal, start_log); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("sme_wifi_start_logger failed(err=%d)", status); |
| EXIT(); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| #endif /* REMOVE_PKT_LOG */ |
| |
| /** |
| * hdd_get_platform_wlan_mac_buff() - API to query platform driver |
| * for MAC address |
| * @dev: Device Pointer |
| * @num: Number of Valid Mac address |
| * |
| * Return: Pointer to MAC address buffer |
| */ |
| static uint8_t *hdd_get_platform_wlan_mac_buff(struct device *dev, |
| uint32_t *num) |
| { |
| return pld_get_wlan_mac_address(dev, num); |
| } |
| |
| /** |
| * hdd_populate_random_mac_addr() - API to populate random mac addresses |
| * @hdd_ctx: HDD Context |
| * @num: Number of random mac addresses needed |
| * |
| * Generate random addresses using bit manipulation on the base mac address |
| * |
| * Return: None |
| */ |
| static void hdd_populate_random_mac_addr(hdd_context_t *hdd_ctx, uint32_t num) |
| { |
| uint32_t start_idx = QDF_MAX_CONCURRENCY_PERSONA - num; |
| uint32_t iter; |
| struct hdd_config *ini = hdd_ctx->config; |
| uint8_t *buf = NULL; |
| uint8_t macaddr_b3, tmp_br3; |
| uint8_t *src = ini->intfMacAddr[0].bytes; |
| |
| for (iter = start_idx; iter < QDF_MAX_CONCURRENCY_PERSONA; ++iter) { |
| buf = ini->intfMacAddr[iter].bytes; |
| qdf_mem_copy(buf, src, QDF_MAC_ADDR_SIZE); |
| macaddr_b3 = buf[3]; |
| tmp_br3 = ((macaddr_b3 >> 4 & INTF_MACADDR_MASK) + iter) & |
| INTF_MACADDR_MASK; |
| macaddr_b3 += tmp_br3; |
| macaddr_b3 ^= (1 << INTF_MACADDR_MASK); |
| buf[0] |= 0x02; |
| buf[3] = macaddr_b3; |
| hdd_debug(MAC_ADDRESS_STR, MAC_ADDR_ARRAY(buf)); |
| } |
| } |
| |
| /** |
| * hdd_platform_wlan_mac() - API to get mac addresses from platform driver |
| * @hdd_ctx: HDD Context |
| * |
| * API to get mac addresses from platform driver and update the driver |
| * structures and configure FW with the base mac address. |
| * Return: int |
| */ |
| static int hdd_platform_wlan_mac(hdd_context_t *hdd_ctx) |
| { |
| uint32_t no_of_mac_addr, iter; |
| uint32_t max_mac_addr = QDF_MAX_CONCURRENCY_PERSONA; |
| uint32_t mac_addr_size = QDF_MAC_ADDR_SIZE; |
| uint8_t *addr, *buf; |
| struct device *dev = hdd_ctx->parent_dev; |
| struct hdd_config *ini = hdd_ctx->config; |
| tSirMacAddr mac_addr; |
| QDF_STATUS status; |
| |
| addr = hdd_get_platform_wlan_mac_buff(dev, &no_of_mac_addr); |
| |
| if (no_of_mac_addr == 0 || !addr) { |
| hdd_warn("Platform Driver Doesn't have wlan mac addresses"); |
| return -EINVAL; |
| } |
| |
| if (no_of_mac_addr > max_mac_addr) |
| no_of_mac_addr = max_mac_addr; |
| |
| qdf_mem_copy(&mac_addr, addr, mac_addr_size); |
| |
| for (iter = 0; iter < no_of_mac_addr; ++iter, addr += mac_addr_size) { |
| buf = ini->intfMacAddr[iter].bytes; |
| qdf_mem_copy(buf, addr, QDF_MAC_ADDR_SIZE); |
| hdd_debug(MAC_ADDRESS_STR, MAC_ADDR_ARRAY(buf)); |
| } |
| |
| status = sme_set_custom_mac_addr(mac_addr); |
| |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| return -EAGAIN; |
| |
| if (no_of_mac_addr < max_mac_addr) |
| hdd_populate_random_mac_addr(hdd_ctx, max_mac_addr - |
| no_of_mac_addr); |
| return 0; |
| } |
| |
| /** |
| * hdd_update_mac_addr_to_fw() - API to update wlan mac addresses to FW |
| * @hdd_ctx: HDD Context |
| * |
| * Update MAC address to FW. If MAC address passed by FW is invalid, host |
| * will generate its own MAC and update it to FW. |
| * |
| * Return: 0 for success |
| * Non-zero error code for failure |
| */ |
| static int hdd_update_mac_addr_to_fw(hdd_context_t *hdd_ctx) |
| { |
| tSirMacAddr customMacAddr; |
| QDF_STATUS status; |
| |
| qdf_mem_copy(&customMacAddr, |
| &hdd_ctx->config->intfMacAddr[0].bytes[0], |
| sizeof(tSirMacAddr)); |
| status = sme_set_custom_mac_addr(customMacAddr); |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| return -EAGAIN; |
| return 0; |
| } |
| |
| /** |
| * hdd_initialize_mac_address() - API to get wlan mac addresses |
| * @hdd_ctx: HDD Context |
| * |
| * Get MAC addresses from platform driver or wlan_mac.bin. If platform driver |
| * is provisioned with mac addresses, driver uses it, else it will use |
| * wlan_mac.bin to update HW MAC addresses. |
| * |
| * Return: None |
| */ |
| static void hdd_initialize_mac_address(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS status; |
| int ret; |
| |
| ret = hdd_platform_wlan_mac(hdd_ctx); |
| if (ret == 0) |
| return; |
| |
| hdd_info("MAC is not programmed in platform driver ret: %d, use wlan_mac.bin", |
| ret); |
| |
| status = hdd_update_mac_config(hdd_ctx); |
| |
| if (QDF_IS_STATUS_SUCCESS(status)) |
| return; |
| |
| hdd_info("MAC is not programmed in wlan_mac.bin ret %d, use default MAC", |
| status); |
| |
| if (hdd_ctx->update_mac_addr_to_fw) { |
| ret = hdd_update_mac_addr_to_fw(hdd_ctx); |
| if (ret != 0) { |
| hdd_err("MAC address out-of-sync, ret:%d", ret); |
| QDF_ASSERT(ret); |
| } |
| } |
| } |
| |
| /** |
| * hdd_tsf_init() - Initialize the TSF synchronization interface |
| * @hdd_ctx: HDD global context |
| * |
| * When TSF synchronization via GPIO is supported by the driver and |
| * has been enabled in the configuration file, this function plumbs |
| * the GPIO value down to firmware via SME. |
| * |
| * Return: None |
| */ |
| #ifdef WLAN_FEATURE_TSF |
| static void hdd_tsf_init(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS status; |
| |
| if (hdd_ctx->config->tsf_gpio_pin == TSF_GPIO_PIN_INVALID) |
| return; |
| |
| status = sme_set_tsf_gpio(hdd_ctx->hHal, |
| hdd_ctx->config->tsf_gpio_pin); |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| hdd_err("Set tsf GPIO failed, status: %d", status); |
| } |
| #else |
| static void hdd_tsf_init(hdd_context_t *hdd_ctx) |
| { |
| } |
| #endif |
| |
| static int hdd_set_smart_chainmask_enabled(hdd_context_t *hdd_ctx) |
| { |
| int vdev_id = 0; |
| int param_id = WMI_PDEV_PARAM_SMART_CHAINMASK_SCHEME; |
| int value = hdd_ctx->config->smart_chainmask_enabled; |
| int vpdev = PDEV_CMD; |
| int ret; |
| |
| ret = wma_cli_set_command(vdev_id, param_id, value, vpdev); |
| if (ret) |
| hdd_err("WMI_PDEV_PARAM_SMART_CHAINMASK_SCHEME failed %d", ret); |
| |
| return ret; |
| } |
| |
| static int hdd_set_alternative_chainmask_enabled(hdd_context_t *hdd_ctx) |
| { |
| int vdev_id = 0; |
| int param_id = WMI_PDEV_PARAM_ALTERNATIVE_CHAINMASK_SCHEME; |
| int value = hdd_ctx->config->alternative_chainmask_enabled; |
| int vpdev = PDEV_CMD; |
| int ret; |
| |
| ret = wma_cli_set_command(vdev_id, param_id, value, vpdev); |
| if (ret) |
| hdd_err("WMI_PDEV_PARAM_ALTERNATIVE_CHAINMASK_SCHEME failed %d", |
| ret); |
| |
| return ret; |
| } |
| |
| static int hdd_set_ani_enabled(hdd_context_t *hdd_ctx) |
| { |
| int vdev_id = 0; |
| int param_id = WMI_PDEV_PARAM_ANI_ENABLE; |
| int value = hdd_ctx->config->ani_enabled; |
| int vpdev = PDEV_CMD; |
| int ret; |
| |
| ret = wma_cli_set_command(vdev_id, param_id, value, vpdev); |
| if (ret) |
| hdd_err("WMI_PDEV_PARAM_ANI_ENABLE failed %d", ret); |
| |
| return ret; |
| } |
| |
| /** |
| * hdd_pre_enable_configure() - Configurations prior to cds_enable |
| * @hdd_ctx: HDD context |
| * |
| * Pre configurations to be done at lower layer before calling cds enable. |
| * |
| * Return: 0 on success and errno on failure. |
| */ |
| static int hdd_pre_enable_configure(hdd_context_t *hdd_ctx) |
| { |
| int ret; |
| QDF_STATUS status; |
| tSirRetStatus hal_status; |
| void *soc = cds_get_context(QDF_MODULE_ID_SOC); |
| |
| cdp_register_pause_cb(soc, wlan_hdd_txrx_pause_cb); |
| /* |
| * Set 802.11p config |
| * TODO-OCB: This has been temporarily added here to ensure this |
| * parameter is set in CSR when we init the channel list. This should |
| * be removed once the 5.9 GHz channels are added to the regulatory |
| * domain. |
| */ |
| hdd_set_dot11p_config(hdd_ctx); |
| |
| /* |
| * Note that the cds_pre_enable() sequence triggers the cfg download. |
| * The cfg download must occur before we update the SME config |
| * since the SME config operation must access the cfg database |
| */ |
| status = hdd_set_sme_config(hdd_ctx); |
| |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_err("Failed hdd_set_sme_config: %d", status); |
| ret = qdf_status_to_os_return(status); |
| goto out; |
| } |
| |
| status = hdd_set_policy_mgr_user_cfg(hdd_ctx); |
| if (QDF_STATUS_SUCCESS != status) { |
| hdd_alert("Failed hdd_set_policy_mgr_user_cfg: %d", status); |
| ret = qdf_status_to_os_return(status); |
| goto out; |
| } |
| |
| ret = wma_cli_set_command(0, WMI_PDEV_PARAM_TX_CHAIN_MASK_1SS, |
| hdd_ctx->config->tx_chain_mask_1ss, |
| PDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMI_PDEV_PARAM_TX_CHAIN_MASK_1SS failed %d", ret); |
| goto out; |
| } |
| |
| ret = hdd_set_smart_chainmask_enabled(hdd_ctx); |
| if (ret) |
| goto out; |
| |
| ret = hdd_set_alternative_chainmask_enabled(hdd_ctx); |
| if (ret) |
| goto out; |
| |
| ret = hdd_set_ani_enabled(hdd_ctx); |
| if (ret) |
| goto out; |
| |
| ret = wma_cli_set_command(0, WMI_PDEV_PARAM_ARP_AC_OVERRIDE, |
| hdd_ctx->config->arp_ac_category, |
| PDEV_CMD); |
| if (0 != ret) { |
| hdd_err("WMI_PDEV_PARAM_ARP_AC_OVERRIDE ac: %d ret: %d", |
| hdd_ctx->config->arp_ac_category, ret); |
| goto out; |
| } |
| |
| |
| status = hdd_set_sme_chan_list(hdd_ctx); |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("Failed to init channel list: %d", status); |
| ret = qdf_status_to_os_return(status); |
| goto out; |
| } |
| |
| /* Apply the cfg.ini to cfg.dat */ |
| if (!hdd_update_config_cfg(hdd_ctx)) { |
| hdd_err("config update failed"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* |
| * Set the MAC Address Currently this is used by HAL to add self sta. |
| * Remove this once self sta is added as part of session open. |
| */ |
| hal_status = cfg_set_str(hdd_ctx->hHal, WNI_CFG_STA_ID, |
| hdd_ctx->config->intfMacAddr[0].bytes, |
| sizeof(hdd_ctx->config->intfMacAddr[0])); |
| |
| if (!IS_SIR_STATUS_SUCCESS(hal_status)) { |
| hdd_err("Failed to set MAC Address. HALStatus is %08d [x%08x]", |
| hal_status, hal_status); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| hdd_init_channel_avoidance(hdd_ctx); |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * wlan_hdd_p2p_lo_event_callback - P2P listen offload stop event handler |
| * @context_ptr - hdd context pointer |
| * @event_ptr - event structure pointer |
| * |
| * This is the p2p listen offload stop event handler, it sends vendor |
| * event back to supplicant to notify the stop reason. |
| * |
| * Return: None |
| */ |
| static void wlan_hdd_p2p_lo_event_callback(void *context_ptr, |
| void *event_ptr) |
| { |
| hdd_context_t *hdd_ctx = (hdd_context_t *)context_ptr; |
| struct sir_p2p_lo_event *evt = event_ptr; |
| struct sk_buff *vendor_event; |
| |
| ENTER(); |
| |
| if (hdd_ctx == NULL) { |
| hdd_err("Invalid HDD context pointer"); |
| return; |
| } |
| |
| vendor_event = |
| cfg80211_vendor_event_alloc(hdd_ctx->wiphy, |
| NULL, sizeof(uint32_t) + NLMSG_HDRLEN, |
| QCA_NL80211_VENDOR_SUBCMD_P2P_LO_EVENT_INDEX, |
| GFP_KERNEL); |
| |
| if (!vendor_event) { |
| hdd_err("cfg80211_vendor_event_alloc failed"); |
| return; |
| } |
| |
| if (nla_put_u32(vendor_event, |
| QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON, |
| evt->reason_code)) { |
| hdd_err("nla put failed"); |
| kfree_skb(vendor_event); |
| return; |
| } |
| |
| cfg80211_vendor_event(vendor_event, GFP_KERNEL); |
| } |
| |
| /** |
| * hdd_adaptive_dwelltime_init() - initialization for adaptive dwell time config |
| * @hdd_ctx: HDD context |
| * |
| * This function sends the adaptive dwell time config configuration to the |
| * firmware via WMA |
| * |
| * Return: 0 - success, < 0 - failure |
| */ |
| static int hdd_adaptive_dwelltime_init(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS status; |
| struct adaptive_dwelltime_params dwelltime_params; |
| |
| dwelltime_params.is_enabled = |
| hdd_ctx->config->adaptive_dwell_mode_enabled; |
| dwelltime_params.dwelltime_mode = |
| hdd_ctx->config->global_adapt_dwelltime_mode; |
| dwelltime_params.lpf_weight = |
| hdd_ctx->config->adapt_dwell_lpf_weight; |
| dwelltime_params.passive_mon_intval = |
| hdd_ctx->config->adapt_dwell_passive_mon_intval; |
| dwelltime_params.wifi_act_threshold = |
| hdd_ctx->config->adapt_dwell_wifi_act_threshold; |
| |
| status = sme_set_adaptive_dwelltime_config(hdd_ctx->hHal, |
| &dwelltime_params); |
| |
| hdd_debug("Sending Adaptive Dwelltime Configuration to fw"); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("Failed to send Adaptive Dwelltime configuration!"); |
| return -EAGAIN; |
| } |
| return 0; |
| } |
| |
| int hdd_dbs_scan_selection_init(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS status; |
| struct wmi_dbs_scan_sel_params dbs_scan_params; |
| uint32_t i = 0; |
| uint8_t count = 0, numentries = 0; |
| uint8_t dbs_scan_config[CDS_DBS_SCAN_PARAM_PER_CLIENT |
| * CDS_DBS_SCAN_CLIENTS_MAX]; |
| |
| /* check if DBS is enabled or supported */ |
| if ((hdd_ctx->config->dual_mac_feature_disable) |
| || (!policy_mgr_is_hw_dbs_capable(hdd_ctx->hdd_psoc))) |
| return -EINVAL; |
| |
| hdd_string_to_u8_array(hdd_ctx->config->dbs_scan_selection, |
| dbs_scan_config, &numentries, |
| (CDS_DBS_SCAN_PARAM_PER_CLIENT |
| * CDS_DBS_SCAN_CLIENTS_MAX)); |
| |
| hdd_info("numentries %hu", numentries); |
| if (!numentries) { |
| hdd_info("Donot send scan_selection_config"); |
| return 0; |
| } |
| |
| /* hdd_set_fw_log_params */ |
| dbs_scan_params.num_clients = 0; |
| while (count < (numentries - 2)) { |
| dbs_scan_params.module_id[i] = dbs_scan_config[count]; |
| dbs_scan_params.num_dbs_scans[i] = dbs_scan_config[count + 1]; |
| dbs_scan_params.num_non_dbs_scans[i] = |
| dbs_scan_config[count + 2]; |
| dbs_scan_params.num_clients++; |
| hdd_debug("module:%d NDS:%d NNDS:%d", |
| dbs_scan_params.module_id[i], |
| dbs_scan_params.num_dbs_scans[i], |
| dbs_scan_params.num_non_dbs_scans[i]); |
| count += CDS_DBS_SCAN_PARAM_PER_CLIENT; |
| i++; |
| } |
| |
| dbs_scan_params.pdev_id = 0; |
| |
| hdd_debug("clients:%d pdev:%d", |
| dbs_scan_params.num_clients, dbs_scan_params.pdev_id); |
| |
| status = sme_set_dbs_scan_selection_config(hdd_ctx->hHal, |
| &dbs_scan_params); |
| hdd_debug("Sending DBS Scan Selection Configuration to fw"); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("Failed to send DBS Scan selection configuration!"); |
| return -EAGAIN; |
| } |
| return 0; |
| } |
| |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| /** |
| * hdd_set_auto_shutdown_cb() - Set auto shutdown callback |
| * @hdd_ctx: HDD context |
| * |
| * Set auto shutdown callback to get indications from firmware to indicate |
| * userspace to shutdown WLAN after a configured amount of inactivity. |
| * |
| * Return: 0 on success and errno on failure. |
| */ |
| static int hdd_set_auto_shutdown_cb(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS status; |
| |
| if (!hdd_ctx->config->WlanAutoShutdown) |
| return 0; |
| |
| status = sme_set_auto_shutdown_cb(hdd_ctx->hHal, |
| wlan_hdd_auto_shutdown_cb); |
| if (status != QDF_STATUS_SUCCESS) |
| hdd_err("Auto shutdown feature could not be enabled: %d", |
| status); |
| |
| return qdf_status_to_os_return(status); |
| } |
| #else |
| static int hdd_set_auto_shutdown_cb(hdd_context_t *hdd_ctx) |
| { |
| return 0; |
| } |
| #endif |
| |
| /** |
| * hdd_features_init() - Init features |
| * @hdd_ctx: HDD context |
| * @adapter: Primary adapter context |
| * |
| * Initialize features and their feature context after WLAN firmware is up. |
| * |
| * Return: 0 on success and errno on failure. |
| */ |
| static int hdd_features_init(hdd_context_t *hdd_ctx, hdd_adapter_t *adapter) |
| { |
| tSirTxPowerLimit hddtxlimit; |
| QDF_STATUS status; |
| int ret; |
| |
| ENTER(); |
| |
| ret = hdd_update_country_code(hdd_ctx); |
| if (ret) { |
| hdd_err("Failed to update country code: %d", ret); |
| goto out; |
| } |
| |
| /* FW capabilities received, Set the Dot11 mode */ |
| sme_setdef_dot11mode(hdd_ctx->hHal); |
| sme_set_prefer_80MHz_over_160MHz(hdd_ctx->hHal, |
| hdd_ctx->config->sta_prefer_80MHz_over_160MHz); |
| |
| |
| if (hdd_ctx->config->fIsImpsEnabled) |
| hdd_set_idle_ps_config(hdd_ctx, true); |
| else |
| hdd_set_idle_ps_config(hdd_ctx, false); |
| |
| if (hdd_ctx->config->enable_go_cts2self_for_sta) |
| sme_set_cts2self_for_p2p_go(hdd_ctx->hHal); |
| |
| if (hdd_lro_init(hdd_ctx)) |
| hdd_err("Unable to initialize LRO in fw"); |
| |
| if (hdd_adaptive_dwelltime_init(hdd_ctx)) |
| hdd_err("Unable to send adaptive dwelltime setting to FW"); |
| |
| if (hdd_dbs_scan_selection_init(hdd_ctx)) |
| hdd_err("Unable to send DBS scan selection setting to FW"); |
| |
| ret = hdd_init_thermal_info(hdd_ctx); |
| if (ret) { |
| hdd_err("Error while initializing thermal information"); |
| goto deregister_frames; |
| } |
| |
| if (cds_is_packet_log_enabled()) |
| hdd_pktlog_enable_disable(hdd_ctx, true, 0, 0); |
| |
| hddtxlimit.txPower2g = hdd_ctx->config->TxPower2g; |
| hddtxlimit.txPower5g = hdd_ctx->config->TxPower5g; |
| status = sme_txpower_limit(hdd_ctx->hHal, &hddtxlimit); |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| hdd_err("Error setting txlimit in sme: %d", status); |
| |
| hdd_tsf_init(hdd_ctx); |
| |
| ret = hdd_register_cb(hdd_ctx); |
| if (ret) { |
| hdd_err("Failed to register HDD callbacks!"); |
| goto deregister_frames; |
| } |
| |
| if (hdd_ctx->config->dual_mac_feature_disable) { |
| status = wlan_hdd_disable_all_dual_mac_features(hdd_ctx); |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("Failed to disable dual mac features"); |
| goto deregister_cb; |
| } |
| } |
| if (hdd_ctx->config->goptimize_chan_avoid_event) { |
| status = sme_enable_disable_chanavoidind_event( |
| hdd_ctx->hHal, 0); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("Failed to disable Chan Avoidance Indication"); |
| goto deregister_cb; |
| } |
| } |
| |
| /* register P2P Listen Offload event callback */ |
| if (wma_is_p2p_lo_capable()) |
| sme_register_p2p_lo_event(hdd_ctx->hHal, hdd_ctx, |
| wlan_hdd_p2p_lo_event_callback); |
| |
| ret = hdd_set_auto_shutdown_cb(hdd_ctx); |
| |
| if (ret) |
| goto deregister_cb; |
| |
| EXIT(); |
| return 0; |
| |
| deregister_cb: |
| hdd_deregister_cb(hdd_ctx); |
| deregister_frames: |
| wlan_hdd_cfg80211_deregister_frames(adapter); |
| out: |
| return -EINVAL; |
| |
| } |
| |
| #ifdef NAPIER_SCAN |
| /** |
| * |
| * hdd_post_cds_enable_config() - HDD post cds start config helper |
| * @adapter - Pointer to the HDD |
| * |
| * Return: None |
| */ |
| static inline QDF_STATUS hdd_register_bcn_cb(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS status; |
| |
| status = ucfg_scan_register_bcn_cb(hdd_ctx->hdd_psoc, |
| wlan_cfg80211_inform_bss_frame, |
| SCAN_CB_TYPE_INFORM_BCN); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("failed with status code %08d [x%08x]", |
| status, status); |
| return status; |
| } |
| |
| return QDF_STATUS_SUCCESS; |
| } |
| #else |
| static inline QDF_STATUS hdd_register_bcn_cb(hdd_context_t *hdd_ctx) |
| { |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| #endif |
| |
| /** |
| * hdd_configure_cds() - Configure cds modules |
| * @hdd_ctx: HDD context |
| * @adapter: Primary adapter context |
| * |
| * Enable Cds modules after WLAN firmware is up. |
| * |
| * Return: 0 on success and errno on failure. |
| */ |
| int hdd_configure_cds(hdd_context_t *hdd_ctx, hdd_adapter_t *adapter) |
| { |
| int ret; |
| QDF_STATUS status; |
| |
| ret = hdd_pre_enable_configure(hdd_ctx); |
| if (ret) { |
| hdd_err("Failed to pre-configure cds"); |
| goto out; |
| } |
| |
| /* Always get latest IPA resources allocated from cds_open and configure |
| * IPA module before configuring them to FW. Sequence required as crash |
| * observed otherwise. |
| */ |
| if (hdd_ipa_uc_ol_init(hdd_ctx)) { |
| hdd_err("Failed to setup pipes"); |
| goto out; |
| } |
| |
| /* |
| * Start CDS which starts up the SME/MAC/HAL modules and everything |
| * else |
| */ |
| status = cds_enable(hdd_ctx->hdd_psoc, hdd_ctx->pcds_context); |
| |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("cds_enable failed"); |
| goto out; |
| } |
| |
| status = hdd_post_cds_enable_config(hdd_ctx); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("hdd_post_cds_enable_config failed"); |
| goto cds_disable; |
| } |
| status = hdd_register_bcn_cb(hdd_ctx); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_alert("hdd_post_cds_enable_config failed"); |
| goto cds_disable; |
| } |
| |
| ret = hdd_features_init(hdd_ctx, adapter); |
| if (ret) |
| goto cds_disable; |
| |
| |
| return 0; |
| |
| cds_disable: |
| cds_disable(hdd_ctx->hdd_psoc, hdd_ctx->pcds_context); |
| |
| out: |
| return -EINVAL; |
| } |
| |
| /** |
| * hdd_deconfigure_cds() -De-Configure cds |
| * @hdd_ctx: HDD context |
| * |
| * Deconfigure Cds modules before WLAN firmware is down. |
| * |
| * Return: 0 on success and errno on failure. |
| */ |
| static int hdd_deconfigure_cds(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS qdf_status; |
| int ret = 0; |
| |
| ENTER(); |
| /* De-register the SME callbacks */ |
| hdd_deregister_cb(hdd_ctx); |
| |
| qdf_status = cds_disable(hdd_ctx->hdd_psoc, hdd_ctx->pcds_context); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| hdd_err("Failed to Disable the CDS Modules! :%d", |
| qdf_status); |
| ret = -EINVAL; |
| } |
| |
| EXIT(); |
| return ret; |
| } |
| |
| #ifdef FEATURE_WLAN_MCC_TO_SCC_SWITCH |
| static void hdd_deregister_policy_manager_callback( |
| struct wlan_objmgr_psoc *psoc) |
| { |
| if (QDF_STATUS_SUCCESS != |
| policy_mgr_deregister_hdd_cb(psoc)) { |
| hdd_err("HDD callback deregister with policy manager failed"); |
| } |
| } |
| #else |
| static void hdd_deregister_policy_manager_callback( |
| struct wlan_objmgr_psoc *psoc) |
| { |
| } |
| #endif |
| |
| /** |
| * hdd_wlan_stop_modules - Single driver state machine for stoping modules |
| * @hdd_ctx: HDD context |
| * @ftm_mode: ftm mode |
| * |
| * This function maintains the driver state machine it will be invoked from |
| * exit, shutdown and con_mode change handler. Depending on the driver state |
| * shall perform the stopping/closing of the modules. |
| * |
| * Return: 0 for success; non-zero for failure |
| */ |
| int hdd_wlan_stop_modules(hdd_context_t *hdd_ctx, bool ftm_mode) |
| { |
| void *hif_ctx; |
| qdf_device_t qdf_ctx; |
| QDF_STATUS qdf_status; |
| int ret = 0; |
| bool is_idle_stop = !cds_is_driver_unloading() && |
| !cds_is_driver_recovering(); |
| int active_threads; |
| |
| ENTER(); |
| |
| hdd_deregister_policy_manager_callback(hdd_ctx->hdd_psoc); |
| |
| qdf_ctx = cds_get_context(QDF_MODULE_ID_QDF_DEVICE); |
| if (!qdf_ctx) { |
| hdd_err("QDF device context NULL"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&hdd_ctx->iface_change_lock); |
| hdd_ctx->stop_modules_in_progress = true; |
| |
| active_threads = cds_return_external_threads_count(); |
| if (active_threads > 0 || hdd_ctx->isWiphySuspended) { |
| hdd_warn("External threads %d wiphy suspend %d", |
| active_threads, hdd_ctx->isWiphySuspended); |
| |
| cds_print_external_threads(); |
| |
| if (is_idle_stop && !ftm_mode) { |
| mutex_unlock(&hdd_ctx->iface_change_lock); |
| qdf_mc_timer_start(&hdd_ctx->iface_change_timer, |
| hdd_ctx->config->iface_change_wait_time); |
| hdd_ctx->stop_modules_in_progress = false; |
| return 0; |
| } |
| } |
| |
| hdd_info("Present Driver Status: %d", hdd_ctx->driver_status); |
| |
| switch (hdd_ctx->driver_status) { |
| case DRIVER_MODULES_UNINITIALIZED: |
| hdd_info("Modules not initialized just return"); |
| goto done; |
| case DRIVER_MODULES_CLOSED: |
| hdd_info("Modules already closed"); |
| goto done; |
| case DRIVER_MODULES_ENABLED: |
| hdd_disable_power_management(); |
| if (hdd_deconfigure_cds(hdd_ctx)) { |
| hdd_err("Failed to de-configure CDS"); |
| QDF_ASSERT(0); |
| ret = -EINVAL; |
| } |
| hdd_debug("successfully Disabled the CDS modules!"); |
| hdd_ctx->driver_status = DRIVER_MODULES_OPENED; |
| break; |
| case DRIVER_MODULES_OPENED: |
| hdd_debug("Closing CDS modules!"); |
| break; |
| default: |
| hdd_err("Trying to stop wlan in a wrong state: %d", |
| hdd_ctx->driver_status); |
| QDF_ASSERT(0); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| qdf_status = cds_post_disable(); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| hdd_err("Failed to process post CDS disable Modules! :%d", |
| qdf_status); |
| ret = -EINVAL; |
| QDF_ASSERT(0); |
| } |
| qdf_status = cds_close(hdd_ctx->hdd_psoc, hdd_ctx->pcds_context); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| hdd_warn("Failed to stop CDS: %d", qdf_status); |
| ret = -EINVAL; |
| QDF_ASSERT(0); |
| } |
| |
| hif_ctx = cds_get_context(QDF_MODULE_ID_HIF); |
| if (!hif_ctx) { |
| hdd_err("Hif context is Null"); |
| ret = -EINVAL; |
| } |
| |
| hdd_hif_close(hdd_ctx, hif_ctx); |
| |
| ol_cds_free(); |
| |
| if (is_idle_stop) { |
| ret = pld_power_off(qdf_ctx->dev); |
| if (ret) |
| hdd_err("CNSS power down failed put device into Low power mode:%d", |
| ret); |
| } |
| hdd_ctx->driver_status = DRIVER_MODULES_CLOSED; |
| /* |
| * Reset total mac phy during module stop such that during |
| * next module start same psoc is used to populate new service |
| * ready data |
| */ |
| hdd_ctx->hdd_psoc->total_mac_phy = 0; |
| |
| done: |
| hdd_ctx->stop_modules_in_progress = false; |
| mutex_unlock(&hdd_ctx->iface_change_lock); |
| EXIT(); |
| |
| return ret; |
| |
| } |
| |
| /** |
| * hdd_iface_change_callback() - Function invoked when stop modules expires |
| * @priv: pointer to hdd context |
| * |
| * This function is invoked when the timer waiting for the interface change |
| * expires, it shall cut-down the power to wlan and stop all the modules. |
| * |
| * Return: void |
| */ |
| static void hdd_iface_change_callback(void *priv) |
| { |
| hdd_context_t *hdd_ctx = (hdd_context_t *) priv; |
| int ret; |
| int status = wlan_hdd_validate_context(hdd_ctx); |
| |
| if (status) |
| return; |
| |
| ENTER(); |
| hdd_debug("Interface change timer expired close the modules!"); |
| ret = hdd_wlan_stop_modules(hdd_ctx, false); |
| if (ret) |
| hdd_err("Failed to stop modules"); |
| EXIT(); |
| } |
| |
| /** |
| * hdd_state_info_dump() - prints state information of hdd layer |
| * @buf: buffer pointer |
| * @size: size of buffer to be filled |
| * |
| * This function is used to dump state information of hdd layer |
| * |
| * Return: None |
| */ |
| static void hdd_state_info_dump(char **buf_ptr, uint16_t *size) |
| { |
| hdd_context_t *hdd_ctx; |
| hdd_adapter_list_node_t *adapter_node = NULL, *next = NULL; |
| QDF_STATUS status; |
| hdd_station_ctx_t *hdd_sta_ctx; |
| hdd_adapter_t *adapter; |
| uint16_t len = 0; |
| char *buf = *buf_ptr; |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| if (!hdd_ctx) { |
| hdd_err("Failed to get hdd context "); |
| return; |
| } |
| |
| hdd_debug("size of buffer: %d", *size); |
| |
| len += scnprintf(buf + len, *size - len, |
| "\n isWiphySuspended %d", hdd_ctx->isWiphySuspended); |
| len += scnprintf(buf + len, *size - len, |
| "\n is_scheduler_suspended %d", |
| hdd_ctx->is_scheduler_suspended); |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| |
| while (NULL != adapter_node && QDF_STATUS_SUCCESS == status) { |
| adapter = adapter_node->pAdapter; |
| if (adapter->dev) |
| len += scnprintf(buf + len, *size - len, |
| "\n device name: %s", adapter->dev->name); |
| len += scnprintf(buf + len, *size - len, |
| "\n device_mode: %d", adapter->device_mode); |
| switch (adapter->device_mode) { |
| case QDF_STA_MODE: |
| case QDF_P2P_CLIENT_MODE: |
| hdd_sta_ctx = WLAN_HDD_GET_STATION_CTX_PTR(adapter); |
| len += scnprintf(buf + len, *size - len, |
| "\n connState: %d", |
| hdd_sta_ctx->conn_info.connState); |
| break; |
| |
| default: |
| break; |
| } |
| status = hdd_get_next_adapter(hdd_ctx, adapter_node, &next); |
| adapter_node = next; |
| } |
| |
| *size -= len; |
| *buf_ptr += len; |
| } |
| |
| /** |
| * hdd_register_debug_callback() - registration function for hdd layer |
| * to print hdd state information |
| * |
| * Return: None |
| */ |
| static void hdd_register_debug_callback(void) |
| { |
| qdf_register_debug_callback(QDF_MODULE_ID_HDD, &hdd_state_info_dump); |
| } |
| |
| /* |
| * wlan_init_bug_report_lock() - Initialize bug report lock |
| * |
| * This function is used to create bug report lock |
| * |
| * Return: None |
| */ |
| static void wlan_init_bug_report_lock(void) |
| { |
| p_cds_contextType p_cds_context; |
| |
| p_cds_context = cds_get_global_context(); |
| if (!p_cds_context) { |
| hdd_err("cds context is NULL"); |
| return; |
| } |
| |
| qdf_spinlock_create(&p_cds_context->bug_report_lock); |
| } |
| |
| /** |
| * hdd_wlan_startup() - HDD init function |
| * @dev: Pointer to the underlying device |
| * |
| * This is the driver startup code executed once a WLAN device has been detected |
| * |
| * Return: 0 for success, < 0 for failure |
| */ |
| int hdd_wlan_startup(struct device *dev) |
| { |
| QDF_STATUS status; |
| hdd_context_t *hdd_ctx; |
| int ret; |
| bool rtnl_held; |
| int set_value; |
| |
| ENTER(); |
| |
| hdd_ctx = hdd_context_create(dev); |
| |
| if (IS_ERR(hdd_ctx)) |
| return PTR_ERR(hdd_ctx); |
| |
| ret = hdd_objmgr_create_and_store_psoc(hdd_ctx, |
| DEFAULT_PSOC_ID); |
| if (ret) { |
| hdd_err("Psoc creation fails!"); |
| QDF_BUG(0); |
| goto err_hdd_free_context; |
| } |
| |
| qdf_mc_timer_init(&hdd_ctx->iface_change_timer, QDF_TIMER_TYPE_SW, |
| hdd_iface_change_callback, (void *)hdd_ctx); |
| |
| mutex_init(&hdd_ctx->iface_change_lock); |
| #ifdef FEATURE_WLAN_CH_AVOID |
| mutex_init(&hdd_ctx->avoid_freq_lock); |
| #endif |
| |
| ret = hdd_init_netlink_services(hdd_ctx); |
| if (ret) |
| goto err_hdd_free_context; |
| |
| hdd_request_manager_init(); |
| hdd_green_ap_init(hdd_ctx); |
| |
| ret = hdd_wlan_start_modules(hdd_ctx, NULL, false); |
| if (ret) { |
| hdd_err("Failed to start modules: %d", ret); |
| goto err_exit_nl_srv; |
| } |
| |
| wlan_init_bug_report_lock(); |
| |
| wlan_hdd_update_wiphy(hdd_ctx); |
| |
| if (0 != wlan_hdd_set_wow_pulse(hdd_ctx, true)) |
| hdd_debug("Failed to set wow pulse"); |
| |
| hdd_ctx->hHal = cds_get_context(QDF_MODULE_ID_SME); |
| |
| if (NULL == hdd_ctx->hHal) { |
| hdd_err("HAL context is null"); |
| goto err_stop_modules; |
| } |
| |
| ret = hdd_wiphy_init(hdd_ctx); |
| if (ret) { |
| hdd_err("Failed to initialize wiphy: %d", ret); |
| goto err_stop_modules; |
| } |
| |
| if (hdd_ctx->config->enable_dp_trace) |
| qdf_dp_trace_init(); |
| |
| if (hdd_ipa_init(hdd_ctx) == QDF_STATUS_E_FAILURE) |
| goto err_wiphy_unregister; |
| |
| wlan_hdd_init_chan_info(hdd_ctx); |
| |
| hdd_initialize_mac_address(hdd_ctx); |
| |
| rtnl_held = hdd_hold_rtnl_lock(); |
| |
| ret = hdd_open_interfaces(hdd_ctx, rtnl_held); |
| if (ret) { |
| hdd_err("Failed to open interfaces: %d", ret); |
| goto err_release_rtnl_lock; |
| } |
| |
| hdd_release_rtnl_lock(); |
| rtnl_held = false; |
| |
| wlan_hdd_update_11n_mode(hdd_ctx->config); |
| |
| #ifdef FEATURE_WLAN_AP_AP_ACS_OPTIMIZE |
| status = qdf_mc_timer_init(&hdd_ctx->skip_acs_scan_timer, |
| QDF_TIMER_TYPE_SW, |
| hdd_skip_acs_scan_timer_handler, |
| (void *)hdd_ctx); |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| hdd_err("Failed to init ACS Skip timer"); |
| qdf_spinlock_create(&hdd_ctx->acs_skip_lock); |
| #endif |
| |
| qdf_mc_timer_init(&hdd_ctx->tdls_source_timer, |
| QDF_TIMER_TYPE_SW, |
| wlan_hdd_change_tdls_mode, |
| hdd_ctx); |
| |
| hdd_bus_bandwidth_init(hdd_ctx); |
| |
| hdd_lpass_notify_start(hdd_ctx); |
| |
| if (hdd_ctx->rps) |
| hdd_set_rps_cpu_mask(hdd_ctx); |
| |
| ret = hdd_register_notifiers(hdd_ctx); |
| if (ret) |
| goto err_close_adapters; |
| |
| status = wlansap_global_init(); |
| if (QDF_IS_STATUS_ERROR(status)) |
| goto err_close_adapters; |
| |
| hdd_runtime_suspend_context_init(hdd_ctx); |
| memdump_init(); |
| hdd_driver_memdump_init(); |
| |
| if (hdd_enable_egap(hdd_ctx)) |
| hdd_debug("enhance green ap is not enabled"); |
| |
| if (hdd_ctx->config->fIsImpsEnabled) |
| hdd_set_idle_ps_config(hdd_ctx, true); |
| |
| if (hdd_ctx->config->sifs_burst_duration) { |
| set_value = (SIFS_BURST_DUR_MULTIPLIER) * |
| hdd_ctx->config->sifs_burst_duration; |
| |
| if ((set_value > 0) && (set_value <= SIFS_BURST_DUR_MAX)) |
| wma_cli_set_command(0, (int)WMI_PDEV_PARAM_BURST_DUR, |
| set_value, PDEV_CMD); |
| } |
| |
| if (hdd_ctx->config->is_force_1x1) |
| wma_cli_set_command(0, (int)WMI_PDEV_PARAM_SET_IOT_PATTERN, |
| 1, PDEV_CMD); |
| |
| if (hdd_ctx->config->max_mpdus_inampdu) { |
| set_value = hdd_ctx->config->max_mpdus_inampdu; |
| wma_cli_set_command(0, (int)WMI_PDEV_PARAM_MAX_MPDUS_IN_AMPDU, |
| set_value, PDEV_CMD); |
| } |
| |
| if (hdd_ctx->config->enable_rts_sifsbursting) { |
| set_value = hdd_ctx->config->enable_rts_sifsbursting; |
| wma_cli_set_command(0, |
| (int)WMI_PDEV_PARAM_ENABLE_RTS_SIFS_BURSTING, |
| set_value, PDEV_CMD); |
| } |
| |
| qdf_mc_timer_start(&hdd_ctx->iface_change_timer, |
| hdd_ctx->config->iface_change_wait_time); |
| |
| hdd_start_complete(0); |
| goto success; |
| |
| err_close_adapters: |
| hdd_close_all_adapters(hdd_ctx, rtnl_held); |
| |
| err_release_rtnl_lock: |
| if (rtnl_held) |
| hdd_release_rtnl_lock(); |
| |
| hdd_ipa_cleanup(hdd_ctx); |
| |
| err_wiphy_unregister: |
| wiphy_unregister(hdd_ctx->wiphy); |
| |
| err_stop_modules: |
| hdd_wlan_stop_modules(hdd_ctx, false); |
| |
| err_exit_nl_srv: |
| if (DRIVER_MODULES_CLOSED == hdd_ctx->driver_status) { |
| status = cds_sched_close(hdd_ctx->pcds_context); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("Failed to close CDS Scheduler"); |
| QDF_ASSERT(QDF_IS_STATUS_SUCCESS(status)); |
| } |
| } |
| |
| hdd_green_ap_deinit(hdd_ctx); |
| hdd_request_manager_deinit(); |
| hdd_exit_netlink_services(hdd_ctx); |
| |
| cds_deinit_ini_config(); |
| err_hdd_free_context: |
| if (cds_is_fw_down()) |
| hdd_err("Not setting the complete event as fw is down"); |
| else |
| hdd_start_complete(ret); |
| |
| qdf_mc_timer_destroy(&hdd_ctx->iface_change_timer); |
| mutex_destroy(&hdd_ctx->iface_change_lock); |
| hdd_context_destroy(hdd_ctx); |
| return -EIO; |
| |
| success: |
| EXIT(); |
| return 0; |
| } |
| |
| /** |
| * hdd_wlan_update_target_info() - update target type info |
| * @hdd_ctx: HDD context |
| * @context: hif context |
| * |
| * Update target info received from firmware in hdd context |
| * Return:None |
| */ |
| |
| void hdd_wlan_update_target_info(hdd_context_t *hdd_ctx, void *context) |
| { |
| struct hif_target_info *tgt_info = hif_get_target_info_handle(context); |
| |
| if (!tgt_info) { |
| hdd_err("Target info is Null"); |
| return; |
| } |
| |
| hdd_ctx->target_type = tgt_info->target_type; |
| } |
| |
| /** |
| * hdd_register_cb - Register HDD callbacks. |
| * @hdd_ctx: HDD context |
| * |
| * Register the HDD callbacks to CDS/SME. |
| * |
| * Return: 0 for success or Error code for failure |
| */ |
| int hdd_register_cb(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS status; |
| int ret = 0; |
| |
| ENTER(); |
| |
| sme_register11d_scan_done_callback(hdd_ctx->hHal, hdd_11d_scan_done); |
| |
| sme_register_oem_data_rsp_callback(hdd_ctx->hHal, |
| hdd_send_oem_data_rsp_msg); |
| |
| status = sme_fw_mem_dump_register_cb(hdd_ctx->hHal, |
| wlan_hdd_cfg80211_fw_mem_dump_cb); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("Failed to register memdump callback"); |
| ret = -EINVAL; |
| return ret; |
| } |
| sme_register_mgmt_frame_ind_callback(hdd_ctx->hHal, |
| hdd_indicate_mgmt_frame); |
| sme_set_tsfcb(hdd_ctx->hHal, hdd_get_tsf_cb, hdd_ctx); |
| sme_nan_register_callback(hdd_ctx->hHal, |
| wlan_hdd_cfg80211_nan_callback); |
| sme_stats_ext_register_callback(hdd_ctx->hHal, |
| wlan_hdd_cfg80211_stats_ext_callback); |
| |
| sme_ext_scan_register_callback(hdd_ctx->hHal, |
| wlan_hdd_cfg80211_extscan_callback); |
| |
| sme_set_rssi_threshold_breached_cb(hdd_ctx->hHal, |
| hdd_rssi_threshold_breached); |
| |
| sme_set_link_layer_stats_ind_cb(hdd_ctx->hHal, |
| wlan_hdd_cfg80211_link_layer_stats_callback); |
| |
| sme_rso_cmd_status_cb(hdd_ctx->hHal, wlan_hdd_rso_cmd_status_cb); |
| |
| sme_set_link_layer_ext_cb(hdd_ctx->hHal, |
| wlan_hdd_cfg80211_link_layer_stats_ext_callback); |
| |
| status = sme_set_lost_link_info_cb(hdd_ctx->hHal, |
| hdd_lost_link_info_cb); |
| /* print error and not block the startup process */ |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| hdd_err("set lost link info callback failed"); |
| |
| wlan_hdd_dcc_register_for_dcc_stats_event(hdd_ctx); |
| |
| sme_register_set_connection_info_cb(hdd_ctx->hHal, |
| hdd_set_connection_in_progress, |
| hdd_is_connection_in_progress); |
| |
| status = sme_congestion_register_callback(hdd_ctx->hHal, |
| hdd_update_cca_info_cb); |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| hdd_err("set congestion callback failed"); |
| |
| EXIT(); |
| |
| return ret; |
| } |
| |
| /** |
| * hdd_deregister_cb() - De-Register HDD callbacks. |
| * @hdd_ctx: HDD context |
| * |
| * De-Register the HDD callbacks to CDS/SME. |
| * |
| * Return: void |
| */ |
| void hdd_deregister_cb(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS status; |
| |
| ENTER(); |
| |
| status = sme_deregister_for_dcc_stats_event(hdd_ctx->hHal); |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| hdd_err("De-register of dcc stats callback failed: %d", |
| status); |
| |
| sme_reset_link_layer_stats_ind_cb(hdd_ctx->hHal); |
| sme_reset_rssi_threshold_breached_cb(hdd_ctx->hHal); |
| |
| sme_stats_ext_register_callback(hdd_ctx->hHal, |
| wlan_hdd_cfg80211_stats_ext_callback); |
| |
| sme_nan_deregister_callback(hdd_ctx->hHal); |
| status = sme_reset_tsfcb(hdd_ctx->hHal); |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| hdd_err("Failed to de-register tsfcb the callback:%d", |
| status); |
| status = sme_fw_mem_dump_unregister_cb(hdd_ctx->hHal); |
| if (!QDF_IS_STATUS_SUCCESS(status)) |
| hdd_err("Failed to de-register the fw mem dump callback: %d", |
| status); |
| |
| sme_deregister_oem_data_rsp_callback(hdd_ctx->hHal); |
| sme_deregister11d_scan_done_callback(hdd_ctx->hHal); |
| |
| EXIT(); |
| } |
| |
| /** |
| * hdd_softap_sta_deauth() - handle deauth req from HDD |
| * @adapter: Pointer to the HDD |
| * @enable: bool value |
| * |
| * This to take counter measure to handle deauth req from HDD |
| * |
| * Return: None |
| */ |
| QDF_STATUS hdd_softap_sta_deauth(hdd_adapter_t *adapter, |
| struct tagCsrDelStaParams *pDelStaParams) |
| { |
| QDF_STATUS qdf_status = QDF_STATUS_E_FAULT; |
| |
| ENTER(); |
| |
| hdd_debug("hdd_softap_sta_deauth:(%p, false)", |
| (WLAN_HDD_GET_CTX(adapter))->pcds_context); |
| |
| /* Ignore request to deauth bcmc station */ |
| if (pDelStaParams->peerMacAddr.bytes[0] & 0x1) |
| return qdf_status; |
| |
| qdf_status = |
| wlansap_deauth_sta(WLAN_HDD_GET_SAP_CTX_PTR(adapter), |
| pDelStaParams); |
| |
| EXIT(); |
| return qdf_status; |
| } |
| |
| /** |
| * hdd_softap_sta_disassoc() - take counter measure to handle deauth req from HDD |
| * @adapter: Pointer to the HDD |
| * @p_del_sta_params: pointer to station deletion parameters |
| * |
| * This to take counter measure to handle deauth req from HDD |
| * |
| * Return: None |
| */ |
| void hdd_softap_sta_disassoc(hdd_adapter_t *adapter, |
| struct tagCsrDelStaParams *pDelStaParams) |
| { |
| ENTER(); |
| |
| hdd_debug("hdd_softap_sta_disassoc:(%p, false)", |
| (WLAN_HDD_GET_CTX(adapter))->pcds_context); |
| |
| /* Ignore request to disassoc bcmc station */ |
| if (pDelStaParams->peerMacAddr.bytes[0] & 0x1) |
| return; |
| |
| wlansap_disassoc_sta(WLAN_HDD_GET_SAP_CTX_PTR(adapter), |
| pDelStaParams); |
| } |
| |
| void hdd_softap_tkip_mic_fail_counter_measure(hdd_adapter_t *adapter, |
| bool enable) |
| { |
| ENTER(); |
| |
| hdd_debug("hdd_softap_tkip_mic_fail_counter_measure:(%p, false)", |
| (WLAN_HDD_GET_CTX(adapter))->pcds_context); |
| |
| wlansap_set_counter_measure(WLAN_HDD_GET_SAP_CTX_PTR(adapter), |
| (bool) enable); |
| } |
| |
| /** |
| * hdd_issta_p2p_clientconnected() - check if sta or p2p client is connected |
| * @hdd_ctx: HDD Context |
| * |
| * API to find if there is any STA or P2P-Client is connected |
| * |
| * Return: true if connected; false otherwise |
| */ |
| QDF_STATUS hdd_issta_p2p_clientconnected(hdd_context_t *hdd_ctx) |
| { |
| return sme_is_sta_p2p_client_connected(hdd_ctx->hHal); |
| } |
| |
| /** |
| * wlan_hdd_disable_roaming() - disable roaming on all STAs except the input one |
| * @adapter: HDD adapter pointer |
| * |
| * This function loop through each adapter and disable roaming on each STA |
| * device mode except the input adapter. |
| * |
| * Note: On the input adapter roaming is not enabled yet hence no need to |
| * disable. |
| * |
| * Return: None |
| */ |
| void wlan_hdd_disable_roaming(hdd_adapter_t *adapter) |
| { |
| hdd_context_t *hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| hdd_adapter_t *adapterIdx = NULL; |
| hdd_adapter_list_node_t *adapterNode = NULL; |
| hdd_adapter_list_node_t *pNext = NULL; |
| QDF_STATUS status; |
| |
| if (hdd_ctx->config->isFastRoamIniFeatureEnabled && |
| hdd_ctx->config->isRoamOffloadScanEnabled && |
| QDF_STA_MODE == adapter->device_mode && |
| policy_mgr_is_sta_active_connection_exists( |
| hdd_ctx->hdd_psoc)) { |
| hdd_debug("Connect received on STA sessionId(%d)", |
| adapter->sessionId); |
| /* |
| * Loop through adapter and disable roaming for each STA device |
| * mode except the input adapter. |
| */ |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapterIdx = adapterNode->pAdapter; |
| |
| if (QDF_STA_MODE == adapterIdx->device_mode |
| && adapter->sessionId != adapterIdx->sessionId) { |
| hdd_debug("Disable Roaming on sessionId(%d)", |
| adapterIdx->sessionId); |
| sme_stop_roaming(WLAN_HDD_GET_HAL_CTX |
| (adapterIdx), |
| adapterIdx->sessionId, 0); |
| } |
| |
| status = hdd_get_next_adapter(hdd_ctx, |
| adapterNode, |
| &pNext); |
| adapterNode = pNext; |
| } |
| } |
| } |
| |
| /** |
| * wlan_hdd_enable_roaming() - enable roaming on all STAs except the input one |
| * @adapter: HDD adapter pointer |
| * |
| * This function loop through each adapter and enable roaming on each STA |
| * device mode except the input adapter. |
| * Note: On the input adapter no need to enable roaming because link got |
| * disconnected on this. |
| * |
| * Return: None |
| */ |
| void wlan_hdd_enable_roaming(hdd_adapter_t *adapter) |
| { |
| hdd_context_t *hdd_ctx = WLAN_HDD_GET_CTX(adapter); |
| hdd_adapter_t *adapterIdx = NULL; |
| hdd_adapter_list_node_t *adapterNode = NULL; |
| hdd_adapter_list_node_t *pNext = NULL; |
| QDF_STATUS status; |
| |
| if (hdd_ctx->config->isFastRoamIniFeatureEnabled && |
| hdd_ctx->config->isRoamOffloadScanEnabled && |
| QDF_STA_MODE == adapter->device_mode && |
| policy_mgr_is_sta_active_connection_exists( |
| hdd_ctx->hdd_psoc)) { |
| hdd_debug("Disconnect received on STA sessionId(%d)", |
| adapter->sessionId); |
| /* |
| * Loop through adapter and enable roaming for each STA device |
| * mode except the input adapter. |
| */ |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapterIdx = adapterNode->pAdapter; |
| |
| if (QDF_STA_MODE == adapterIdx->device_mode |
| && adapter->sessionId != adapterIdx->sessionId) { |
| hdd_debug("Enabling Roaming on sessionId(%d)", |
| adapterIdx->sessionId); |
| sme_start_roaming(WLAN_HDD_GET_HAL_CTX |
| (adapterIdx), |
| adapterIdx->sessionId, |
| REASON_CONNECT); |
| } |
| |
| status = hdd_get_next_adapter(hdd_ctx, |
| adapterNode, |
| &pNext); |
| adapterNode = pNext; |
| } |
| } |
| } |
| |
| /** |
| * nl_srv_bcast_svc() - Wrapper function to send bcast msgs to SVC mcast group |
| * @skb: sk buffer pointer |
| * |
| * Sends the bcast message to SVC multicast group with generic nl socket |
| * if CNSS_GENL is enabled. Else, use the legacy netlink socket to send. |
| * |
| * Return: None |
| */ |
| static void nl_srv_bcast_svc(struct sk_buff *skb) |
| { |
| #ifdef CNSS_GENL |
| nl_srv_bcast(skb, CLD80211_MCGRP_SVC_MSGS, WLAN_NL_MSG_SVC); |
| #else |
| nl_srv_bcast(skb); |
| #endif |
| } |
| |
| void wlan_hdd_send_svc_nlink_msg(int radio, int type, void *data, int len) |
| { |
| struct sk_buff *skb; |
| struct nlmsghdr *nlh; |
| tAniMsgHdr *ani_hdr; |
| void *nl_data = NULL; |
| int flags = GFP_KERNEL; |
| struct radio_index_tlv *radio_info; |
| int tlv_len; |
| |
| if (in_interrupt() || irqs_disabled() || in_atomic()) |
| flags = GFP_ATOMIC; |
| |
| skb = alloc_skb(NLMSG_SPACE(WLAN_NL_MAX_PAYLOAD), flags); |
| |
| if (skb == NULL) |
| return; |
| |
| nlh = (struct nlmsghdr *)skb->data; |
| nlh->nlmsg_pid = 0; /* from kernel */ |
| nlh->nlmsg_flags = 0; |
| nlh->nlmsg_seq = 0; |
| nlh->nlmsg_type = WLAN_NL_MSG_SVC; |
| |
| ani_hdr = NLMSG_DATA(nlh); |
| ani_hdr->type = type; |
| |
| switch (type) { |
| case WLAN_SVC_FW_CRASHED_IND: |
| case WLAN_SVC_FW_SHUTDOWN_IND: |
| case WLAN_SVC_LTE_COEX_IND: |
| case WLAN_SVC_WLAN_AUTO_SHUTDOWN_IND: |
| case WLAN_SVC_WLAN_AUTO_SHUTDOWN_CANCEL_IND: |
| ani_hdr->length = 0; |
| nlh->nlmsg_len = NLMSG_LENGTH((sizeof(tAniMsgHdr))); |
| break; |
| case WLAN_SVC_WLAN_STATUS_IND: |
| case WLAN_SVC_WLAN_VERSION_IND: |
| case WLAN_SVC_DFS_CAC_START_IND: |
| case WLAN_SVC_DFS_CAC_END_IND: |
| case WLAN_SVC_DFS_RADAR_DETECT_IND: |
| case WLAN_SVC_DFS_ALL_CHANNEL_UNAVAIL_IND: |
| case WLAN_SVC_WLAN_TP_IND: |
| case WLAN_SVC_WLAN_TP_TX_IND: |
| case WLAN_SVC_RPS_ENABLE_IND: |
| ani_hdr->length = len; |
| nlh->nlmsg_len = NLMSG_LENGTH((sizeof(tAniMsgHdr) + len)); |
| nl_data = (char *)ani_hdr + sizeof(tAniMsgHdr); |
| memcpy(nl_data, data, len); |
| break; |
| |
| default: |
| hdd_err("WLAN SVC: Attempt to send unknown nlink message %d", |
| type); |
| kfree_skb(skb); |
| return; |
| } |
| |
| /* |
| * Add radio index at the end of the svc event in TLV format |
| * to maintain the backward compatibility with userspace |
| * applications. |
| */ |
| |
| tlv_len = 0; |
| |
| if ((sizeof(*ani_hdr) + len + sizeof(struct radio_index_tlv)) |
| < WLAN_NL_MAX_PAYLOAD) { |
| radio_info = (struct radio_index_tlv *)((char *) ani_hdr + |
| sizeof(*ani_hdr) + len); |
| radio_info->type = (unsigned short) WLAN_SVC_WLAN_RADIO_INDEX; |
| radio_info->length = (unsigned short) sizeof(radio_info->radio); |
| radio_info->radio = radio; |
| tlv_len = sizeof(*radio_info); |
| QDF_TRACE(QDF_MODULE_ID_HDD, QDF_TRACE_LEVEL_DEBUG, |
| "Added radio index tlv - radio index %d", |
| radio_info->radio); |
| } |
| |
| nlh->nlmsg_len += tlv_len; |
| skb_put(skb, NLMSG_SPACE(sizeof(tAniMsgHdr) + len + tlv_len)); |
| |
| nl_srv_bcast_svc(skb); |
| } |
| |
| #ifdef FEATURE_WLAN_AUTO_SHUTDOWN |
| void wlan_hdd_auto_shutdown_cb(void) |
| { |
| hdd_context_t *hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| |
| if (!hdd_ctx) |
| return; |
| |
| hdd_debug("Wlan Idle. Sending Shutdown event.."); |
| wlan_hdd_send_svc_nlink_msg(hdd_ctx->radio_index, |
| WLAN_SVC_WLAN_AUTO_SHUTDOWN_IND, NULL, 0); |
| } |
| |
| void wlan_hdd_auto_shutdown_enable(hdd_context_t *hdd_ctx, bool enable) |
| { |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| QDF_STATUS status; |
| hdd_adapter_t *adapter; |
| bool ap_connected = false, sta_connected = false; |
| tHalHandle hal_handle; |
| |
| hal_handle = hdd_ctx->hHal; |
| if (hal_handle == NULL) |
| return; |
| |
| if (hdd_ctx->config->WlanAutoShutdown == 0) |
| return; |
| |
| if (enable == false) { |
| if (sme_set_auto_shutdown_timer(hal_handle, 0) != |
| QDF_STATUS_SUCCESS) { |
| hdd_err("Failed to stop wlan auto shutdown timer"); |
| } |
| wlan_hdd_send_svc_nlink_msg(hdd_ctx->radio_index, |
| WLAN_SVC_WLAN_AUTO_SHUTDOWN_CANCEL_IND, NULL, 0); |
| return; |
| } |
| |
| /* To enable shutdown timer check conncurrency */ |
| if (policy_mgr_concurrent_open_sessions_running( |
| hdd_ctx->hdd_psoc)) { |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| if (adapter |
| && adapter->device_mode == |
| QDF_STA_MODE) { |
| if (WLAN_HDD_GET_STATION_CTX_PTR(adapter)-> |
| conn_info.connState == |
| eConnectionState_Associated) { |
| sta_connected = true; |
| break; |
| } |
| } |
| if (adapter |
| && adapter->device_mode == QDF_SAP_MODE) { |
| if (WLAN_HDD_GET_AP_CTX_PTR(adapter)-> |
| bApActive == true) { |
| ap_connected = true; |
| break; |
| } |
| } |
| status = hdd_get_next_adapter(hdd_ctx, |
| adapterNode, |
| &pNext); |
| adapterNode = pNext; |
| } |
| } |
| |
| if (ap_connected == true || sta_connected == true) { |
| hdd_debug("CC Session active. Shutdown timer not enabled"); |
| return; |
| } |
| |
| if (sme_set_auto_shutdown_timer(hal_handle, |
| hdd_ctx->config->WlanAutoShutdown) |
| != QDF_STATUS_SUCCESS) |
| hdd_err("Failed to start wlan auto shutdown timer"); |
| else |
| hdd_notice("Auto Shutdown timer for %d seconds enabled", |
| hdd_ctx->config->WlanAutoShutdown); |
| } |
| #endif |
| |
| hdd_adapter_t *hdd_get_con_sap_adapter(hdd_adapter_t *this_sap_adapter, |
| bool check_start_bss) |
| { |
| hdd_context_t *hdd_ctx = WLAN_HDD_GET_CTX(this_sap_adapter); |
| hdd_adapter_t *adapter, *con_sap_adapter; |
| QDF_STATUS status = QDF_STATUS_SUCCESS; |
| hdd_adapter_list_node_t *adapterNode = NULL, *pNext = NULL; |
| |
| con_sap_adapter = NULL; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &adapterNode); |
| while (NULL != adapterNode && QDF_STATUS_SUCCESS == status) { |
| adapter = adapterNode->pAdapter; |
| if (adapter && ((adapter->device_mode == QDF_SAP_MODE) || |
| (adapter->device_mode == QDF_P2P_GO_MODE)) && |
| adapter != this_sap_adapter) { |
| if (check_start_bss) { |
| if (test_bit(SOFTAP_BSS_STARTED, |
| &adapter->event_flags)) { |
| con_sap_adapter = adapter; |
| break; |
| } |
| } else { |
| con_sap_adapter = adapter; |
| break; |
| } |
| } |
| status = hdd_get_next_adapter(hdd_ctx, adapterNode, &pNext); |
| adapterNode = pNext; |
| } |
| |
| return con_sap_adapter; |
| } |
| |
| #ifdef MSM_PLATFORM |
| static inline bool hdd_adapter_is_sta(hdd_adapter_t *adapter) |
| { |
| return adapter->device_mode == QDF_STA_MODE || |
| adapter->device_mode == QDF_P2P_CLIENT_MODE; |
| } |
| |
| static inline bool hdd_adapter_is_ap(hdd_adapter_t *adapter) |
| { |
| return adapter->device_mode == QDF_SAP_MODE || |
| adapter->device_mode == QDF_P2P_GO_MODE; |
| } |
| |
| static bool hdd_any_adapter_is_assoc(hdd_context_t *hdd_ctx) |
| { |
| QDF_STATUS status; |
| hdd_adapter_list_node_t *node; |
| |
| status = hdd_get_front_adapter(hdd_ctx, &node); |
| while (QDF_IS_STATUS_SUCCESS(status) && node) { |
| hdd_adapter_t *adapter = node->pAdapter; |
| |
| if (adapter && |
| hdd_adapter_is_sta(adapter) && |
| WLAN_HDD_GET_STATION_CTX_PTR(adapter)-> |
| conn_info.connState == eConnectionState_Associated) { |
| return true; |
| } |
| |
| if (adapter && |
| hdd_adapter_is_ap(adapter) && |
| WLAN_HDD_GET_AP_CTX_PTR(adapter)->bApActive) { |
| return true; |
| } |
| |
| status = hdd_get_next_adapter(hdd_ctx, node, &node); |
| } |
| |
| return false; |
| } |
| |
| static bool hdd_bus_bw_compute_timer_is_running(hdd_context_t *hdd_ctx) |
| { |
| bool is_running; |
| |
| qdf_spinlock_acquire(&hdd_ctx->bus_bw_timer_lock); |
| is_running = hdd_ctx->bus_bw_timer_running; |
| qdf_spinlock_release(&hdd_ctx->bus_bw_timer_lock); |
| |
| return is_running; |
| } |
| |
| static void __hdd_bus_bw_compute_timer_start(hdd_context_t *hdd_ctx) |
| { |
| qdf_spinlock_acquire(&hdd_ctx->bus_bw_timer_lock); |
| hdd_ctx->bus_bw_timer_running = true; |
| qdf_timer_start(&hdd_ctx->bus_bw_timer, |
| hdd_ctx->config->busBandwidthComputeInterval); |
| qdf_spinlock_release(&hdd_ctx->bus_bw_timer_lock); |
| } |
| |
| void hdd_bus_bw_compute_timer_start(hdd_context_t *hdd_ctx) |
| { |
| ENTER(); |
| |
| if (hdd_bus_bw_compute_timer_is_running(hdd_ctx)) { |
| hdd_debug("Bandwidth compute timer already started"); |
| return; |
| } |
| |
| __hdd_bus_bw_compute_timer_start(hdd_ctx); |
| |
| EXIT(); |
| } |
| |
| void hdd_bus_bw_compute_timer_try_start(hdd_context_t *hdd_ctx) |
| { |
| ENTER(); |
| |
| if (hdd_bus_bw_compute_timer_is_running(hdd_ctx)) { |
| hdd_debug("Bandwidth compute timer already started"); |
| return; |
| } |
| |
| if (hdd_any_adapter_is_assoc(hdd_ctx)) |
| __hdd_bus_bw_compute_timer_start(hdd_ctx); |
| |
| EXIT(); |
| } |
| |
| static void __hdd_bus_bw_compute_timer_stop(hdd_context_t *hdd_ctx) |
| { |
| hdd_ipa_set_perf_level(hdd_ctx, 0, 0); |
| |
| qdf_spinlock_acquire(&hdd_ctx->bus_bw_timer_lock); |
| qdf_timer_stop(&hdd_ctx->bus_bw_timer); |
| hdd_ctx->bus_bw_timer_running = false; |
| qdf_spinlock_release(&hdd_ctx->bus_bw_timer_lock); |
| |
| hdd_reset_tcp_delack(hdd_ctx); |
| } |
| |
| void hdd_bus_bw_compute_timer_stop(hdd_context_t *hdd_ctx) |
| { |
| ENTER(); |
| |
| if (!hdd_bus_bw_compute_timer_is_running(hdd_ctx)) { |
| hdd_debug("Bandwidth compute timer already stopped"); |
| return; |
| } |
| |
| __hdd_bus_bw_compute_timer_stop(hdd_ctx); |
| |
| EXIT(); |
| } |
| |
| void hdd_bus_bw_compute_timer_try_stop(hdd_context_t *hdd_ctx) |
| { |
| ENTER(); |
| |
| if (!hdd_bus_bw_compute_timer_is_running(hdd_ctx)) { |
| hdd_debug("Bandwidth compute timer already stopped"); |
| return; |
| } |
| |
| if (!hdd_any_adapter_is_assoc(hdd_ctx)) |
| __hdd_bus_bw_compute_timer_stop(hdd_ctx); |
| |
| EXIT(); |
| } |
| #endif |
| |
| /** |
| * wlan_hdd_check_custom_con_channel_rules() - This function checks the sap's |
| * and sta's operating channel. |
| * @sta_adapter: Describe the first argument to foobar. |
| * @ap_adapter: Describe the second argument to foobar. |
| * @roam_profile: Roam profile of AP to which STA wants to connect. |
| * @concurrent_chnl_same: If both SAP and STA channels are same then |
| * set this flag to true else false. |
| * |
| * This function checks the sap's operating channel and sta's operating channel. |
| * if both are same then it will return false else it will restart the sap in |
| * sta's channel and return true. |
| * |
| * Return: QDF_STATUS_SUCCESS or QDF_STATUS_E_FAILURE. |
| */ |
| QDF_STATUS wlan_hdd_check_custom_con_channel_rules(hdd_adapter_t *sta_adapter, |
| hdd_adapter_t *ap_adapter, |
| tCsrRoamProfile *roam_profile, |
| tScanResultHandle *scan_cache, |
| bool *concurrent_chnl_same) |
| { |
| hdd_ap_ctx_t *hdd_ap_ctx; |
| uint8_t channel_id; |
| QDF_STATUS status; |
| enum tQDF_ADAPTER_MODE device_mode = ap_adapter->device_mode; |
| *concurrent_chnl_same = true; |
| |
| hdd_ap_ctx = WLAN_HDD_GET_AP_CTX_PTR(ap_adapter); |
| status = |
| sme_get_ap_channel_from_scan_cache(roam_profile, |
| scan_cache, |
| &channel_id); |
| if (QDF_STATUS_SUCCESS == status) { |
| if ((QDF_SAP_MODE == device_mode) && |
| (channel_id < SIR_11A_CHANNEL_BEGIN)) { |
| if (hdd_ap_ctx->operatingChannel != channel_id) { |
| *concurrent_chnl_same = false; |
| hdd_debug("channels are different"); |
| } |
| } else if ((QDF_P2P_GO_MODE == device_mode) && |
| (channel_id >= SIR_11A_CHANNEL_BEGIN)) { |
| if (hdd_ap_ctx->operatingChannel != channel_id) { |
| *concurrent_chnl_same = false; |
| hdd_debug("channels are different"); |
| } |
| } |
| } else { |
| /* |
| * Lets handle worst case scenario here, Scan cache lookup is |
| * failed so we have to stop the SAP to avoid any channel |
| * discrepancy between SAP's channel and STA's channel. |
| * Return the status as failure so caller function could know |
| * that scan look up is failed. |
| */ |
| hdd_err("Finding AP from scan cache failed"); |
| return QDF_STATUS_E_FAILURE; |
| } |
| return QDF_STATUS_SUCCESS; |
| } |
| |
| /** |
| * wlan_hdd_stop_sap() - This function stops bss of SAP. |
| * @ap_adapter: SAP adapter |
| * |
| * This function will process the stopping of sap adapter. |
| * |
| * Return: None |
| */ |
| void wlan_hdd_stop_sap(hdd_adapter_t *ap_adapter) |
| { |
| hdd_ap_ctx_t *hdd_ap_ctx; |
| hdd_hostapd_state_t *hostapd_state; |
| QDF_STATUS qdf_status; |
| hdd_context_t *hdd_ctx; |
| |
| if (NULL == ap_adapter) { |
| hdd_err("ap_adapter is NULL here"); |
| return; |
| } |
| |
| hdd_ap_ctx = WLAN_HDD_GET_AP_CTX_PTR(ap_adapter); |
| hdd_ctx = WLAN_HDD_GET_CTX(ap_adapter); |
| if (wlan_hdd_validate_context(hdd_ctx)) |
| return; |
| |
| mutex_lock(&hdd_ctx->sap_lock); |
| if (test_bit(SOFTAP_BSS_STARTED, &ap_adapter->event_flags)) { |
| wlan_hdd_del_station(ap_adapter); |
| hdd_cleanup_actionframe(hdd_ctx, ap_adapter); |
| hostapd_state = WLAN_HDD_GET_HOSTAP_STATE_PTR(ap_adapter); |
| hdd_debug("Now doing SAP STOPBSS"); |
| qdf_event_reset(&hostapd_state->qdf_stop_bss_event); |
| if (QDF_STATUS_SUCCESS == wlansap_stop_bss(hdd_ap_ctx-> |
| sapContext)) { |
| qdf_status = qdf_wait_single_event(&hostapd_state-> |
| qdf_stop_bss_event, |
| SME_CMD_TIMEOUT_VALUE); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| mutex_unlock(&hdd_ctx->sap_lock); |
| hdd_err("SAP Stop Failed"); |
| return; |
| } |
| } |
| clear_bit(SOFTAP_BSS_STARTED, &ap_adapter->event_flags); |
| policy_mgr_decr_session_set_pcl(hdd_ctx->hdd_psoc, |
| ap_adapter->device_mode, |
| ap_adapter->sessionId); |
| hdd_debug("SAP Stop Success"); |
| } else { |
| hdd_err("Can't stop ap because its not started"); |
| } |
| mutex_unlock(&hdd_ctx->sap_lock); |
| } |
| |
| /** |
| * wlan_hdd_start_sap() - this function starts bss of SAP. |
| * @ap_adapter: SAP adapter |
| * |
| * This function will process the starting of sap adapter. |
| * |
| * Return: None |
| */ |
| void wlan_hdd_start_sap(hdd_adapter_t *ap_adapter, bool reinit) |
| { |
| hdd_ap_ctx_t *hdd_ap_ctx; |
| hdd_hostapd_state_t *hostapd_state; |
| QDF_STATUS qdf_status; |
| hdd_context_t *hdd_ctx; |
| tsap_Config_t *sap_config; |
| |
| if (NULL == ap_adapter) { |
| hdd_err("ap_adapter is NULL here"); |
| return; |
| } |
| |
| if (QDF_SAP_MODE != ap_adapter->device_mode) { |
| hdd_err("SoftAp role has not been enabled"); |
| return; |
| } |
| |
| hdd_ctx = WLAN_HDD_GET_CTX(ap_adapter); |
| hdd_ap_ctx = WLAN_HDD_GET_AP_CTX_PTR(ap_adapter); |
| hostapd_state = WLAN_HDD_GET_HOSTAP_STATE_PTR(ap_adapter); |
| sap_config = &ap_adapter->sessionCtx.ap.sapConfig; |
| |
| mutex_lock(&hdd_ctx->sap_lock); |
| if (test_bit(SOFTAP_BSS_STARTED, &ap_adapter->event_flags)) |
| goto end; |
| |
| if (0 != wlan_hdd_cfg80211_update_apies(ap_adapter)) { |
| hdd_err("SAP Not able to set AP IEs"); |
| wlansap_reset_sap_config_add_ie(sap_config, eUPDATE_IE_ALL); |
| goto end; |
| } |
| |
| qdf_event_reset(&hostapd_state->qdf_event); |
| if (wlansap_start_bss(hdd_ap_ctx->sapContext, hdd_hostapd_sap_event_cb, |
| &hdd_ap_ctx->sapConfig, |
| ap_adapter->dev) |
| != QDF_STATUS_SUCCESS) |
| goto end; |
| |
| hdd_debug("Waiting for SAP to start"); |
| qdf_status = qdf_wait_single_event(&hostapd_state->qdf_event, |
| SME_CMD_TIMEOUT_VALUE); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| hdd_err("SAP Start failed"); |
| goto end; |
| } |
| hdd_info("SAP Start Success"); |
| set_bit(SOFTAP_BSS_STARTED, &ap_adapter->event_flags); |
| if (hostapd_state->bssState == BSS_START) |
| policy_mgr_incr_active_session(hdd_ctx->hdd_psoc, |
| ap_adapter->device_mode, |
| ap_adapter->sessionId); |
| hostapd_state->bCommit = true; |
| |
| end: |
| mutex_unlock(&hdd_ctx->sap_lock); |
| } |
| |
| /** |
| * wlan_hdd_soc_set_antenna_mode_cb() - Callback for set dual |
| * mac scan config |
| * @status: Status of set antenna mode |
| * |
| * Callback on setting the dual mac configuration |
| * |
| * Return: None |
| */ |
| void wlan_hdd_soc_set_antenna_mode_cb( |
| enum set_antenna_mode_status status) |
| { |
| hdd_context_t *hdd_ctx; |
| |
| hdd_debug("Status: %d", status); |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| if (0 != wlan_hdd_validate_context(hdd_ctx)) |
| return; |
| |
| /* Signal the completion of set dual mac config */ |
| complete(&hdd_ctx->set_antenna_mode_cmpl); |
| } |
| |
| /** |
| * hdd_get_fw_version() - Get FW version |
| * @hdd_ctx: pointer to HDD context. |
| * @major_spid: FW version - major spid. |
| * @minor_spid: FW version - minor spid |
| * @ssid: FW version - ssid |
| * @crmid: FW version - crmid |
| * |
| * This function is called to get the firmware build version stored |
| * as part of the HDD context |
| * |
| * Return: None |
| */ |
| void hdd_get_fw_version(hdd_context_t *hdd_ctx, |
| uint32_t *major_spid, uint32_t *minor_spid, |
| uint32_t *siid, uint32_t *crmid) |
| { |
| *major_spid = (hdd_ctx->target_fw_version & 0xf0000000) >> 28; |
| *minor_spid = (hdd_ctx->target_fw_version & 0xf000000) >> 24; |
| *siid = (hdd_ctx->target_fw_version & 0xf00000) >> 20; |
| *crmid = hdd_ctx->target_fw_version & 0x7fff; |
| } |
| |
| #ifdef QCA_CONFIG_SMP |
| /** |
| * wlan_hdd_get_cpu() - get cpu_index |
| * |
| * Return: cpu_index |
| */ |
| int wlan_hdd_get_cpu(void) |
| { |
| int cpu_index = get_cpu(); |
| |
| put_cpu(); |
| return cpu_index; |
| } |
| #endif |
| |
| /** |
| * hdd_get_fwpath() - get framework path |
| * |
| * This function is used to get the string written by |
| * userspace to start the wlan driver |
| * |
| * Return: string |
| */ |
| const char *hdd_get_fwpath(void) |
| { |
| return fwpath.string; |
| } |
| |
| /** |
| * hdd_init() - Initialize Driver |
| * |
| * This function initilizes CDS global context with the help of cds_init. This |
| * has to be the first function called after probe to get a valid global |
| * context. |
| * |
| * Return: 0 for success, errno on failure |
| */ |
| int hdd_init(void) |
| { |
| v_CONTEXT_t p_cds_context = NULL; |
| int ret = 0; |
| |
| p_cds_context = cds_init(); |
| #ifdef WLAN_LOGGING_SOCK_SVC_ENABLE |
| wlan_logging_sock_init_svc(); |
| #endif |
| |
| if (p_cds_context == NULL) { |
| hdd_err("Failed to allocate CDS context"); |
| ret = -ENOMEM; |
| goto err_out; |
| } |
| |
| hdd_trace_init(); |
| hdd_register_debug_callback(); |
| |
| err_out: |
| return ret; |
| } |
| |
| /** |
| * hdd_deinit() - Deinitialize Driver |
| * |
| * This function frees CDS global context with the help of cds_deinit. This |
| * has to be the last function call in remove callback to free the global |
| * context. |
| */ |
| void hdd_deinit(void) |
| { |
| hdd_deinit_wowl(); |
| cds_deinit(); |
| |
| #ifdef WLAN_LOGGING_SOCK_SVC_ENABLE |
| wlan_logging_sock_deinit_svc(); |
| #endif |
| } |
| |
| #ifdef QCA_WIFI_NAPIER_EMULATION |
| #define HDD_WLAN_START_WAIT_TIME ((CDS_WMA_TIMEOUT + 5000) * 100) |
| #else |
| #define HDD_WLAN_START_WAIT_TIME (CDS_WMA_TIMEOUT + 5000) |
| #endif |
| |
| static int wlan_hdd_state_ctrl_param_open(struct inode *inode, |
| struct file *file) |
| { |
| return 0; |
| } |
| |
| static ssize_t wlan_hdd_state_ctrl_param_write(struct file *filp, |
| const char __user *user_buf, |
| size_t count, |
| loff_t *f_pos) |
| { |
| char buf; |
| static const char wlan_off_str[] = "OFF"; |
| static const char wlan_on_str[] = "ON"; |
| int ret; |
| unsigned long rc; |
| |
| if (copy_from_user(&buf, user_buf, 3)) { |
| pr_err("Failed to read buffer\n"); |
| return -EINVAL; |
| } |
| |
| if (strncmp(&buf, wlan_off_str, strlen(wlan_off_str)) == 0) { |
| pr_debug("Wifi turning off from UI\n"); |
| goto exit; |
| } |
| |
| if (strncmp(&buf, wlan_on_str, strlen(wlan_on_str)) != 0) { |
| pr_err("Invalid value received from framework"); |
| goto exit; |
| } |
| |
| if (!cds_is_driver_loaded()) { |
| init_completion(&wlan_start_comp); |
| rc = wait_for_completion_timeout(&wlan_start_comp, |
| msecs_to_jiffies(HDD_WLAN_START_WAIT_TIME)); |
| if (!rc) { |
| hdd_alert("Timed-out waiting in wlan_hdd_state_ctrl_param_write"); |
| ret = -EINVAL; |
| hdd_start_complete(ret); |
| return ret; |
| } |
| |
| hdd_start_complete(0); |
| } |
| |
| exit: |
| return count; |
| } |
| |
| |
| const struct file_operations wlan_hdd_state_fops = { |
| .owner = THIS_MODULE, |
| .open = wlan_hdd_state_ctrl_param_open, |
| .write = wlan_hdd_state_ctrl_param_write, |
| }; |
| |
| static int wlan_hdd_state_ctrl_param_create(void) |
| { |
| unsigned int wlan_hdd_state_major = 0; |
| int ret; |
| struct device *dev; |
| |
| device = MKDEV(wlan_hdd_state_major, 0); |
| |
| ret = alloc_chrdev_region(&device, 0, dev_num, "qcwlanstate"); |
| if (ret) { |
| pr_err("Failed to register qcwlanstate"); |
| goto dev_alloc_err; |
| } |
| wlan_hdd_state_major = MAJOR(device); |
| |
| class = class_create(THIS_MODULE, WLAN_MODULE_NAME); |
| if (IS_ERR(class)) { |
| pr_err("wlan_hdd_state class_create error"); |
| goto class_err; |
| } |
| |
| dev = device_create(class, NULL, device, NULL, WLAN_MODULE_NAME); |
| if (IS_ERR(dev)) { |
| pr_err("wlan_hdd_statedevice_create error"); |
| goto err_class_destroy; |
| } |
| |
| cdev_init(&wlan_hdd_state_cdev, &wlan_hdd_state_fops); |
| ret = cdev_add(&wlan_hdd_state_cdev, device, dev_num); |
| if (ret) { |
| pr_err("Failed to add cdev error"); |
| goto cdev_add_err; |
| } |
| |
| pr_info("wlan_hdd_state %s major(%d) initialized", |
| WLAN_MODULE_NAME, wlan_hdd_state_major); |
| |
| return 0; |
| |
| cdev_add_err: |
| device_destroy(class, device); |
| err_class_destroy: |
| class_destroy(class); |
| class_err: |
| unregister_chrdev_region(device, dev_num); |
| dev_alloc_err: |
| return -ENODEV; |
| } |
| |
| static void wlan_hdd_state_ctrl_param_destroy(void) |
| { |
| cdev_del(&wlan_hdd_state_cdev); |
| device_destroy(class, device); |
| class_destroy(class); |
| unregister_chrdev_region(device, dev_num); |
| |
| pr_info("Device node unregistered"); |
| } |
| |
| /** |
| * __hdd_module_init - Module init helper |
| * |
| * Module init helper function used by both module and static driver. |
| * |
| * Return: 0 for success, errno on failure |
| */ |
| static int __hdd_module_init(void) |
| { |
| int ret = 0; |
| |
| pr_err("%s: Loading driver v%s (%s)%s\n", |
| WLAN_MODULE_NAME, |
| QWLAN_VERSIONSTR, |
| BUILD_TIMESTAMP, |
| TIMER_MANAGER_STR MEMORY_DEBUG_STR); |
| |
| ret = wlan_hdd_state_ctrl_param_create(); |
| if (ret) { |
| pr_err("wlan_hdd_state_create:%x\n", ret); |
| goto err_dev_state; |
| } |
| |
| pld_init(); |
| |
| ret = hdd_init(); |
| if (ret) { |
| pr_err("hdd_init failed %x\n", ret); |
| goto err_hdd_init; |
| } |
| |
| dispatcher_init(); |
| |
| qdf_wake_lock_create(&wlan_wake_lock, "wlan"); |
| |
| hdd_set_conparam((uint32_t) con_mode); |
| |
| ret = wlan_hdd_register_driver(); |
| if (ret) { |
| pr_err("%s: driver load failure, err %d\n", WLAN_MODULE_NAME, |
| ret); |
| goto out; |
| } |
| |
| pr_info("%s: driver loaded\n", WLAN_MODULE_NAME); |
| |
| return 0; |
| out: |
| qdf_wake_lock_destroy(&wlan_wake_lock); |
| dispatcher_deinit(); |
| hdd_deinit(); |
| |
| err_hdd_init: |
| pld_deinit(); |
| wlan_hdd_state_ctrl_param_destroy(); |
| err_dev_state: |
| return ret; |
| } |
| |
| /** |
| * hdd_wait_for_recovery_completion() - Wait for cds recovery completion |
| * |
| * Block the unloading of the driver until the cds recovery is completed |
| * |
| * Return: None |
| */ |
| static void hdd_wait_for_recovery_completion(void) |
| { |
| int retry = 0; |
| |
| /* Wait for recovery to complete */ |
| while (cds_is_driver_recovering()) { |
| hdd_err("Recovery in progress; wait here!!!"); |
| msleep(1000); |
| if (retry++ == HDD_MOD_EXIT_SSR_MAX_RETRIES) { |
| hdd_err("SSR never completed, error"); |
| QDF_BUG(0); |
| } |
| } |
| } |
| |
| /** |
| * __hdd_module_exit - Module exit helper |
| * |
| * Module exit helper function used by both module and static driver. |
| */ |
| static void __hdd_module_exit(void) |
| { |
| int qdf_print_idx = -1; |
| |
| pr_info("%s: Unloading driver v%s\n", WLAN_MODULE_NAME, |
| QWLAN_VERSIONSTR); |
| |
| cds_set_unload_in_progress(true); |
| |
| hdd_wait_for_recovery_completion(); |
| |
| wlan_hdd_unregister_driver(); |
| |
| qdf_wake_lock_destroy(&wlan_wake_lock); |
| |
| dispatcher_deinit(); |
| hdd_deinit(); |
| pld_deinit(); |
| |
| qdf_print_idx = qdf_get_pidx(); |
| qdf_print_ctrl_cleanup(qdf_print_idx); |
| wlan_hdd_state_ctrl_param_destroy(); |
| } |
| |
| #ifndef MODULE |
| /** |
| * wlan_boot_cb() - Wlan boot callback |
| * @kobj: object whose directory we're creating the link in. |
| * @attr: attribute the user is interacting with |
| * @buff: the buffer containing the user data |
| * @count: number of bytes in the buffer |
| * |
| * This callback is invoked when the fs is ready to start the |
| * wlan driver initialization. |
| * |
| * Return: 'count' on success or a negative error code in case of failure |
| */ |
| static ssize_t wlan_boot_cb(struct kobject *kobj, |
| struct kobj_attribute *attr, |
| const char *buf, |
| size_t count) |
| { |
| |
| if (wlan_loader->loaded_state) { |
| pr_err("%s: wlan driver already initialized\n", __func__); |
| return -EALREADY; |
| } |
| |
| if (__hdd_module_init()) { |
| pr_err("%s: wlan driver initialization failed\n", __func__); |
| return -EIO; |
| } |
| |
| wlan_loader->loaded_state = MODULE_INITIALIZED; |
| |
| return count; |
| } |
| |
| /** |
| * hdd_sysfs_cleanup() - cleanup sysfs |
| * |
| * Return: None |
| * |
| */ |
| static void hdd_sysfs_cleanup(void) |
| { |
| /* remove from group */ |
| if (wlan_loader->boot_wlan_obj && wlan_loader->attr_group) |
| sysfs_remove_group(wlan_loader->boot_wlan_obj, |
| wlan_loader->attr_group); |
| |
| /* unlink the object from parent */ |
| kobject_del(wlan_loader->boot_wlan_obj); |
| |
| /* free the object */ |
| kobject_put(wlan_loader->boot_wlan_obj); |
| |
| kfree(wlan_loader->attr_group); |
| kfree(wlan_loader); |
| |
| wlan_loader = NULL; |
| } |
| |
| /** |
| * wlan_init_sysfs() - Creates the sysfs to be invoked when the fs is |
| * ready |
| * |
| * This is creates the syfs entry boot_wlan. Which shall be invoked |
| * when the filesystem is ready. |
| * |
| * QDF API cannot be used here since this function is called even before |
| * initializing WLAN driver. |
| * |
| * Return: 0 for success, errno on failure |
| */ |
| static int wlan_init_sysfs(void) |
| { |
| int ret = -ENOMEM; |
| |
| wlan_loader = kzalloc(sizeof(*wlan_loader), GFP_KERNEL); |
| if (!wlan_loader) |
| return -ENOMEM; |
| |
| wlan_loader->boot_wlan_obj = NULL; |
| wlan_loader->attr_group = kzalloc(sizeof(*(wlan_loader->attr_group)), |
| GFP_KERNEL); |
| if (!wlan_loader->attr_group) |
| goto error_return; |
| |
| wlan_loader->loaded_state = 0; |
| wlan_loader->attr_group->attrs = attrs; |
| |
| wlan_loader->boot_wlan_obj = kobject_create_and_add("boot_wlan", |
| kernel_kobj); |
| if (!wlan_loader->boot_wlan_obj) { |
| pr_err("%s: sysfs create and add failed\n", __func__); |
| goto error_return; |
| } |
| |
| ret = sysfs_create_group(wlan_loader->boot_wlan_obj, |
| wlan_loader->attr_group); |
| if (ret) { |
| pr_err("%s: sysfs create group failed %d\n", __func__, ret); |
| goto error_return; |
| } |
| |
| return 0; |
| |
| error_return: |
| hdd_sysfs_cleanup(); |
| |
| return ret; |
| } |
| |
| /** |
| * wlan_deinit_sysfs() - Removes the sysfs created to initialize the wlan |
| * |
| * Return: 0 on success or errno on failure |
| */ |
| static int wlan_deinit_sysfs(void) |
| { |
| if (!wlan_loader) { |
| hdd_err("wlan loader context is Null!"); |
| return -EINVAL; |
| } |
| |
| hdd_sysfs_cleanup(); |
| return 0; |
| } |
| |
| #endif /* MODULE */ |
| |
| #ifdef MODULE |
| /** |
| * __hdd_module_init - Module init helper |
| * |
| * Module init helper function used by both module and static driver. |
| * |
| * Return: 0 for success, errno on failure |
| */ |
| static int hdd_module_init(void) |
| { |
| if (__hdd_module_init()) { |
| pr_err("%s: Failed to register handler\n", __func__); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| #else |
| static int __init hdd_module_init(void) |
| { |
| int ret = -EINVAL; |
| |
| ret = wlan_init_sysfs(); |
| if (ret) |
| pr_err("Failed to create sysfs entry for loading wlan"); |
| |
| return ret; |
| } |
| #endif |
| |
| |
| #ifdef MODULE |
| /** |
| * hdd_module_exit() - Exit function |
| * |
| * This is the driver exit point (invoked when module is unloaded using rmmod) |
| * |
| * Return: None |
| */ |
| static void __exit hdd_module_exit(void) |
| { |
| __hdd_module_exit(); |
| } |
| #else |
| static void __exit hdd_module_exit(void) |
| { |
| __hdd_module_exit(); |
| wlan_deinit_sysfs(); |
| } |
| #endif |
| |
| static int fwpath_changed_handler(const char *kmessage, struct kernel_param *kp) |
| { |
| return param_set_copystring(kmessage, kp); |
| } |
| |
| /** |
| * is_con_mode_valid() check con mode is valid or not |
| * @mode: global con mode |
| * |
| * Return: TRUE on success FALSE on failure |
| */ |
| static bool is_con_mode_valid(enum tQDF_GLOBAL_CON_MODE mode) |
| { |
| switch (mode) { |
| case QDF_GLOBAL_MONITOR_MODE: |
| case QDF_GLOBAL_FTM_MODE: |
| case QDF_GLOBAL_EPPING_MODE: |
| case QDF_GLOBAL_MISSION_MODE: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /** |
| * hdd_get_adpter_mode() - returns adapter mode based on global con mode |
| * @mode: global con mode |
| * |
| * Return: adapter mode |
| */ |
| static enum tQDF_ADAPTER_MODE hdd_get_adpter_mode( |
| enum tQDF_GLOBAL_CON_MODE mode) |
| { |
| |
| switch (mode) { |
| case QDF_GLOBAL_MISSION_MODE: |
| return QDF_STA_MODE; |
| case QDF_GLOBAL_MONITOR_MODE: |
| return QDF_MONITOR_MODE; |
| case QDF_GLOBAL_EPPING_MODE: |
| return QDF_EPPING_MODE; |
| case QDF_GLOBAL_FTM_MODE: |
| return QDF_FTM_MODE; |
| case QDF_GLOBAL_QVIT_MODE: |
| return QDF_QVIT_MODE; |
| default: |
| return QDF_MAX_NO_OF_MODE; |
| } |
| } |
| |
| static void hdd_cleanup_present_mode(hdd_context_t *hdd_ctx, |
| enum tQDF_GLOBAL_CON_MODE curr_mode) |
| { |
| int driver_status; |
| |
| driver_status = hdd_ctx->driver_status; |
| |
| switch (curr_mode) { |
| case QDF_GLOBAL_MISSION_MODE: |
| case QDF_GLOBAL_MONITOR_MODE: |
| case QDF_GLOBAL_FTM_MODE: |
| if (driver_status != DRIVER_MODULES_CLOSED) { |
| hdd_abort_mac_scan_all_adapters(hdd_ctx); |
| hdd_stop_all_adapters(hdd_ctx); |
| } |
| hdd_deinit_all_adapters(hdd_ctx, false); |
| hdd_close_all_adapters(hdd_ctx, false); |
| break; |
| case QDF_GLOBAL_EPPING_MODE: |
| epping_disable(); |
| epping_close(); |
| break; |
| default: |
| return; |
| } |
| } |
| |
| static int hdd_register_req_mode(hdd_context_t *hdd_ctx, |
| enum tQDF_GLOBAL_CON_MODE mode) |
| { |
| hdd_adapter_t *adapter; |
| int ret = 0; |
| bool rtnl_held; |
| qdf_device_t qdf_dev = cds_get_context(QDF_MODULE_ID_QDF_DEVICE); |
| QDF_STATUS status; |
| |
| if (!qdf_dev) { |
| hdd_err("qdf device context is Null return!"); |
| return -EINVAL; |
| } |
| |
| rtnl_held = hdd_hold_rtnl_lock(); |
| switch (mode) { |
| case QDF_GLOBAL_MISSION_MODE: |
| ret = hdd_open_interfaces(hdd_ctx, rtnl_held); |
| if (ret) |
| hdd_err("Failed to open interfaces: %d", ret); |
| break; |
| case QDF_GLOBAL_FTM_MODE: |
| adapter = hdd_open_adapter(hdd_ctx, QDF_FTM_MODE, "wlan%d", |
| wlan_hdd_get_intf_addr(hdd_ctx), |
| NET_NAME_UNKNOWN, rtnl_held); |
| if (adapter == NULL) |
| ret = -EINVAL; |
| break; |
| case QDF_GLOBAL_MONITOR_MODE: |
| adapter = hdd_open_adapter(hdd_ctx, QDF_MONITOR_MODE, "wlan%d", |
| wlan_hdd_get_intf_addr(hdd_ctx), |
| NET_NAME_UNKNOWN, rtnl_held); |
| if (adapter == NULL) |
| ret = -EINVAL; |
| break; |
| case QDF_GLOBAL_EPPING_MODE: |
| status = epping_open(); |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("Failed to open in eeping mode: %d", status); |
| ret = -EINVAL; |
| break; |
| } |
| ret = epping_enable(qdf_dev->dev); |
| if (ret) { |
| hdd_err("Failed to enable in epping mode : %d", ret); |
| epping_close(); |
| } |
| break; |
| default: |
| hdd_err("Mode not supported"); |
| ret = -ENOTSUPP; |
| break; |
| } |
| hdd_release_rtnl_lock(); |
| rtnl_held = false; |
| return ret; |
| } |
| |
| /** |
| * __con_mode_handler() - Handles module param con_mode change |
| * @kmessage: con mode name on which driver to be bring up |
| * @kp: The associated kernel parameter |
| * @hdd_ctx: Pointer to the global HDD context |
| * |
| * This function is invoked when user updates con mode using sys entry, |
| * to initialize and bring-up driver in that specific mode. |
| * |
| * Return - 0 on success and failure code on failure |
| */ |
| static int __con_mode_handler(const char *kmessage, struct kernel_param *kp, |
| hdd_context_t *hdd_ctx) |
| { |
| int ret; |
| hdd_adapter_t *adapter; |
| enum tQDF_GLOBAL_CON_MODE curr_mode; |
| enum tQDF_ADAPTER_MODE adapter_mode; |
| |
| hdd_info("con_mode handler: %s", kmessage); |
| |
| ret = wlan_hdd_validate_context(hdd_ctx); |
| if (ret) |
| return ret; |
| |
| cds_set_load_in_progress(true); |
| |
| ret = param_set_int(kmessage, kp); |
| |
| if (!(is_con_mode_valid(con_mode))) { |
| hdd_err("invlaid con_mode %d", con_mode); |
| ret = -EINVAL; |
| goto reset_flags; |
| } |
| |
| curr_mode = hdd_get_conparam(); |
| if (curr_mode == con_mode) { |
| hdd_err("curr mode: %d is same as user triggered mode %d", |
| curr_mode, con_mode); |
| ret = 0; |
| goto reset_flags; |
| } |
| |
| /* Cleanup present mode before switching to new mode */ |
| hdd_cleanup_present_mode(hdd_ctx, curr_mode); |
| |
| ret = hdd_wlan_stop_modules(hdd_ctx, true); |
| if (ret) { |
| hdd_err("Stop wlan modules failed"); |
| goto reset_flags; |
| } |
| |
| hdd_set_conparam(con_mode); |
| |
| /* Register for new con_mode & then kick_start modules again */ |
| ret = hdd_register_req_mode(hdd_ctx, con_mode); |
| if (ret) { |
| hdd_err("Failed to register for new mode"); |
| goto reset_flags; |
| } |
| |
| adapter_mode = hdd_get_adpter_mode(con_mode); |
| if (adapter_mode == QDF_MAX_NO_OF_MODE) { |
| hdd_err("invalid adapter"); |
| ret = -EINVAL; |
| goto reset_flags; |
| } |
| |
| adapter = hdd_get_adapter(hdd_ctx, adapter_mode); |
| if (!adapter) { |
| hdd_err("Failed to get adapter:%d", adapter_mode); |
| goto reset_flags; |
| } |
| |
| ret = hdd_wlan_start_modules(hdd_ctx, adapter, false); |
| if (ret) { |
| hdd_err("Start wlan modules failed: %d", ret); |
| goto reset_flags; |
| } |
| |
| if (con_mode == QDF_GLOBAL_MONITOR_MODE || |
| con_mode == QDF_GLOBAL_FTM_MODE) { |
| if (hdd_start_adapter(adapter)) { |
| hdd_err("Failed to start %s adapter", kmessage); |
| ret = -EINVAL; |
| goto reset_flags; |
| } |
| } |
| |
| hdd_info("Mode successfully changed to %s", kmessage); |
| ret = 0; |
| |
| reset_flags: |
| cds_set_load_in_progress(false); |
| return ret; |
| } |
| |
| |
| static int con_mode_handler(const char *kmessage, struct kernel_param *kp) |
| { |
| int ret; |
| hdd_context_t *hdd_ctx; |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| ret = wlan_hdd_validate_context(hdd_ctx); |
| if (ret) |
| return ret; |
| |
| cds_ssr_protect(__func__); |
| ret = __con_mode_handler(kmessage, kp, hdd_ctx); |
| cds_ssr_unprotect(__func__); |
| |
| return ret; |
| } |
| |
| /** |
| * hdd_get_conparam() - driver exit point |
| * |
| * This is the driver exit point (invoked when module is unloaded using rmmod) |
| * |
| * Return: enum tQDF_GLOBAL_CON_MODE |
| */ |
| enum tQDF_GLOBAL_CON_MODE hdd_get_conparam(void) |
| { |
| return (enum tQDF_GLOBAL_CON_MODE) curr_con_mode; |
| } |
| |
| void hdd_set_conparam(uint32_t con_param) |
| { |
| curr_con_mode = con_param; |
| } |
| |
| /** |
| * hdd_clean_up_pre_cac_interface() - Clean up the pre cac interface |
| * @hdd_ctx: HDD context |
| * |
| * Cleans up the pre cac interface, if it exists |
| * |
| * Return: None |
| */ |
| void hdd_clean_up_pre_cac_interface(hdd_context_t *hdd_ctx) |
| { |
| uint8_t session_id; |
| QDF_STATUS status; |
| struct hdd_adapter_s *precac_adapter; |
| |
| status = wlan_sap_get_pre_cac_vdev_id(hdd_ctx->hHal, &session_id); |
| if (QDF_IS_STATUS_ERROR(status)) { |
| hdd_err("failed to get pre cac vdev id"); |
| return; |
| } |
| |
| precac_adapter = hdd_get_adapter_by_vdev(hdd_ctx, session_id); |
| if (!precac_adapter) { |
| hdd_err("invalid pre cac adapater"); |
| return; |
| } |
| |
| qdf_create_work(0, &hdd_ctx->sap_pre_cac_work, |
| wlan_hdd_sap_pre_cac_failure, |
| (void *)precac_adapter); |
| qdf_sched_work(0, &hdd_ctx->sap_pre_cac_work); |
| |
| } |
| |
| /** |
| * hdd_update_ol_config - API to update ol configuration parameters |
| * @hdd_ctx: HDD context |
| * |
| * Return: void |
| */ |
| static void hdd_update_ol_config(hdd_context_t *hdd_ctx) |
| { |
| struct ol_config_info cfg; |
| struct ol_context *ol_ctx = cds_get_context(QDF_MODULE_ID_BMI); |
| |
| if (!ol_ctx) |
| return; |
| |
| cfg.enable_self_recovery = hdd_ctx->config->enableSelfRecovery; |
| cfg.enable_uart_print = hdd_ctx->config->enablefwprint; |
| cfg.enable_fw_log = hdd_ctx->config->enable_fw_log; |
| cfg.enable_ramdump_collection = hdd_ctx->config->is_ramdump_enabled; |
| cfg.enable_lpass_support = hdd_lpass_is_supported(hdd_ctx); |
| |
| ol_init_ini_config(ol_ctx, &cfg); |
| } |
| |
| #ifdef FEATURE_RUNTIME_PM |
| /** |
| * hdd_populate_runtime_cfg() - populate runtime configuration |
| * @hdd_ctx: hdd context |
| * @cfg: pointer to the configuration memory being populated |
| * |
| * Return: void |
| */ |
| static void hdd_populate_runtime_cfg(hdd_context_t *hdd_ctx, |
| struct hif_config_info *cfg) |
| { |
| cfg->enable_runtime_pm = hdd_ctx->config->runtime_pm; |
| cfg->runtime_pm_delay = hdd_ctx->config->runtime_pm_delay; |
| } |
| #else |
| static void hdd_populate_runtime_cfg(hdd_context_t *hdd_ctx, |
| struct hif_config_info *cfg) |
| { |
| } |
| #endif |
| |
| /** |
| * hdd_update_hif_config - API to update HIF configuration parameters |
| * @hdd_ctx: HDD Context |
| * |
| * Return: void |
| */ |
| static void hdd_update_hif_config(hdd_context_t *hdd_ctx) |
| { |
| struct hif_opaque_softc *scn = cds_get_context(QDF_MODULE_ID_HIF); |
| struct hif_config_info cfg; |
| |
| if (!scn) |
| return; |
| |
| cfg.enable_self_recovery = hdd_ctx->config->enableSelfRecovery; |
| hdd_populate_runtime_cfg(hdd_ctx, &cfg); |
| hif_init_ini_config(scn, &cfg); |
| } |
| |
| /** |
| * hdd_update_config() - Initialize driver per module ini parameters |
| * @hdd_ctx: HDD Context |
| * |
| * API is used to initialize all driver per module configuration parameters |
| * Return: 0 for success, errno for failure |
| */ |
| int hdd_update_config(hdd_context_t *hdd_ctx) |
| { |
| int ret; |
| |
| hdd_update_ol_config(hdd_ctx); |
| hdd_update_hif_config(hdd_ctx); |
| if (QDF_GLOBAL_FTM_MODE == hdd_get_conparam()) |
| ret = hdd_update_cds_config_ftm(hdd_ctx); |
| else |
| ret = hdd_update_cds_config(hdd_ctx); |
| ret = hdd_update_user_config(hdd_ctx); |
| |
| return ret; |
| } |
| |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| /** |
| * hdd_ra_populate_cds_config() - Populate RA filtering cds configuration |
| * @psoc_cfg: pmo psoc Configuration |
| * @hdd_ctx: Pointer to hdd context |
| * |
| * Return: none |
| */ |
| static inline void hdd_ra_populate_pmo_config( |
| struct pmo_psoc_cfg *psoc_cfg, |
| hdd_context_t *hdd_ctx) |
| { |
| psoc_cfg->ra_ratelimit_interval = |
| hdd_ctx->config->RArateLimitInterval; |
| psoc_cfg->ra_ratelimit_enable = |
| hdd_ctx->config->IsRArateLimitEnabled; |
| } |
| #else |
| static inline void hdd_ra_populate_pmo_config( |
| struct cds_config_info *cds_cfg, |
| hdd_context_t *hdd_ctx) |
| { |
| } |
| #endif |
| /** |
| * hdd_update_pmo_config - API to update pmo configuration parameters |
| * @hdd_ctx: HDD context |
| * |
| * Return: void |
| */ |
| static int hdd_update_pmo_config(hdd_context_t *hdd_ctx) |
| { |
| struct wlan_objmgr_psoc *psoc = hdd_ctx->hdd_psoc; |
| struct pmo_psoc_cfg psoc_cfg; |
| QDF_STATUS status; |
| |
| /* |
| * Value of hdd_ctx->wowEnable can be, |
| * 0 - Disable both magic pattern match and pattern byte match. |
| * 1 - Enable magic pattern match on all interfaces. |
| * 2 - Enable pattern byte match on all interfaces. |
| * 3 - Enable both magic patter and pattern byte match on |
| * all interfaces. |
| */ |
| psoc_cfg.magic_ptrn_enable = |
| (hdd_ctx->config->wowEnable & 0x01) ? true : false; |
| psoc_cfg.ptrn_match_enable_all_vdev = |
| (hdd_ctx->config->wowEnable & 0x02) ? true : false; |
| psoc_cfg.bpf_enable = |
| hdd_ctx->config->bpf_packet_filter_enable; |
| psoc_cfg.arp_offload_enable = hdd_ctx->config->fhostArpOffload; |
| psoc_cfg.hw_filter_mode = hdd_ctx->config->hw_filter_mode; |
| psoc_cfg.ns_offload_enable_static = hdd_ctx->config->fhostNSOffload; |
| if (hdd_ctx->config->fhostNSOffload) |
| psoc_cfg.ns_offload_enable_dynamic = true; |
| psoc_cfg.ssdp = hdd_ctx->config->ssdp; |
| psoc_cfg.enable_mc_list = hdd_ctx->config->fEnableMCAddrList; |
| psoc_cfg.active_mode_offload = |
| hdd_ctx->config->active_mode_offload; |
| psoc_cfg.ap_arpns_support = hdd_ctx->ap_arpns_support; |
| psoc_cfg.max_wow_filters = hdd_ctx->config->maxWoWFilters; |
| psoc_cfg.sta_dynamic_dtim = hdd_ctx->config->enableDynamicDTIM; |
| psoc_cfg.sta_mod_dtim = hdd_ctx->config->enableModulatedDTIM; |
| psoc_cfg.sta_max_li_mod_dtim = hdd_ctx->config->fMaxLIModulatedDTIM; |
| psoc_cfg.power_save_mode = |
| hdd_ctx->config->enablePowersaveOffload; |
| |
| hdd_ra_populate_pmo_config(&psoc_cfg, hdd_ctx); |
| hdd_nan_populate_pmo_config(&psoc_cfg, hdd_ctx); |
| hdd_lpass_populate_pmo_config(&psoc_cfg, hdd_ctx); |
| status = pmo_ucfg_update_psoc_config(psoc, &psoc_cfg); |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("failed pmo psoc configuration"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef NAPIER_SCAN |
| |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| static inline void hdd_update_pno_config(struct pno_user_cfg *pno_cfg, |
| struct hdd_config *cfg) |
| { |
| pno_cfg->channel_prediction = cfg->pno_channel_prediction; |
| pno_cfg->top_k_num_of_channels = cfg->top_k_num_of_channels; |
| pno_cfg->stationary_thresh = cfg->stationary_thresh; |
| pno_cfg->adaptive_dwell_mode = cfg->adaptive_dwell_mode_enabled; |
| pno_cfg->channel_prediction_full_scan = |
| cfg->channel_prediction_full_scan; |
| } |
| #else |
| static inline void |
| hdd_update_pno_config(struct pno_user_cfg *pno_cfg, |
| struct hdd_config *cfg) |
| { |
| return; |
| } |
| #endif |
| |
| /** |
| * hdd_update_scan_config - API to update scan configuration parameters |
| * @hdd_ctx: HDD context |
| * |
| * Return: 0 if success else err |
| */ |
| static int hdd_update_scan_config(hdd_context_t *hdd_ctx) |
| { |
| struct wlan_objmgr_psoc *psoc = hdd_ctx->hdd_psoc; |
| struct scan_user_cfg scan_cfg; |
| struct hdd_config *cfg = hdd_ctx->config; |
| QDF_STATUS status; |
| |
| scan_cfg.active_dwell = cfg->nActiveMaxChnTime; |
| scan_cfg.passive_dwell = cfg->nPassiveMaxChnTime; |
| scan_cfg.conc_active_dwell = cfg->nActiveMaxChnTimeConc; |
| scan_cfg.conc_passive_dwell = cfg->nPassiveMaxChnTimeConc; |
| scan_cfg.conc_max_rest_time = cfg->nRestTimeConc; |
| scan_cfg.conc_min_rest_time = cfg->min_rest_time_conc; |
| scan_cfg.conc_idle_time = cfg->idle_time_conc; |
| /* convert to ms */ |
| scan_cfg.scan_cache_aging_time = |
| cfg->scanAgingTimeout * 1000; |
| scan_cfg.prefer_5ghz = cfg->nRoamPrefer5GHz; |
| scan_cfg.select_5ghz_margin = cfg->nSelect5GHzMargin; |
| scan_cfg.scan_bucket_threshold = cfg->first_scan_bucket_threshold; |
| scan_cfg.rssi_cat_gap = cfg->nRssiCatGap; |
| scan_cfg.scan_dwell_time_mode = cfg->scan_adaptive_dwell_mode; |
| scan_cfg.is_snr_monitoring_enabled = cfg->fEnableSNRMonitoring; |
| |
| hdd_update_pno_config(&scan_cfg.pno_cfg, cfg); |
| |
| status = ucfg_scan_update_user_config(psoc, &scan_cfg); |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("failed pmo psoc configuration"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| #else |
| static int hdd_update_scan_config(hdd_context_t *hdd_ctx) |
| { |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONVERGED_TDLS_ENABLE |
| static int hdd_update_tdls_config(hdd_context_t *hdd_ctx) |
| { |
| struct wlan_objmgr_psoc *psoc = hdd_ctx->hdd_psoc; |
| struct tdls_start_params tdls_cfg; |
| struct tdls_user_config *config = &tdls_cfg.config; |
| struct hdd_config *cfg = hdd_ctx->config; |
| QDF_STATUS status; |
| |
| config->tdls_tx_states_period = cfg->fTDLSTxStatsPeriod; |
| config->tdls_tx_pkt_threshold = cfg->fTDLSTxPacketThreshold; |
| config->tdls_rx_pkt_threshold = cfg->fTDLSRxFrameThreshold; |
| config->tdls_max_discovery_attempt = cfg->fTDLSMaxDiscoveryAttempt; |
| config->tdls_idle_timeout = cfg->tdls_idle_timeout; |
| config->tdls_idle_pkt_threshold = cfg->fTDLSIdlePacketThreshold; |
| config->tdls_rssi_trigger_threshold = cfg->fTDLSRSSITriggerThreshold; |
| config->tdls_rssi_teardown_threshold = cfg->fTDLSRSSITeardownThreshold; |
| config->tdls_rssi_delta = cfg->fTDLSRSSIDelta; |
| config->tdls_uapsd_mask = cfg->fTDLSUapsdMask; |
| config->tdls_uapsd_inactivity_time = cfg->fTDLSPuapsdInactivityTimer; |
| config->tdls_uapsd_pti_window = cfg->fTDLSPuapsdPTIWindow; |
| config->tdls_uapsd_ptr_timeout = cfg->fTDLSPuapsdPTRTimeout; |
| config->tdls_pre_off_chan_num = cfg->fTDLSPrefOffChanNum; |
| config->tdls_pre_off_chan_bw = cfg->fTDLSPrefOffChanBandwidth; |
| config->tdls_peer_kickout_threshold = cfg->tdls_peer_kickout_threshold; |
| config->delayed_trig_framint = cfg->DelayedTriggerFrmInt; |
| config->tdls_feature_flags = ((cfg->fEnableTDLSOffChannel ? |
| 1 << TDLS_FEATURE_OFF_CHANNEL : 0) | |
| (cfg->fEnableTDLSWmmMode ? 1 << TDLS_FEATURE_WMM : 0) | |
| (cfg->fEnableTDLSBufferSta ? 1 << TDLS_FEATURE_BUFFER_STA : 0) | |
| (cfg->fEnableTDLSSleepSta ? 1 << TDLS_FEATURE_SLEEP_STA : 0) | |
| (cfg->enable_tdls_scan ? 1 << TDLS_FEATURE_SCAN : 0) | |
| (cfg->fEnableTDLSSupport ? 1 << TDLS_FEATURE_ENABLE : 0) | |
| (cfg->fEnableTDLSImplicitTrigger ? |
| 1 << TDLS_FEAUTRE_IMPLICIT_TRIGGER : 0) | |
| (cfg->fTDLSExternalControl ? |
| 1 << TDLS_FEATURE_EXTERNAL_CONTROL : 0)); |
| |
| tdls_cfg.tdls_send_mgmt_req = eWNI_SME_TDLS_SEND_MGMT_REQ; |
| tdls_cfg.tdls_add_sta_req = eWNI_SME_TDLS_ADD_STA_REQ; |
| tdls_cfg.tdls_del_sta_req = eWNI_SME_TDLS_DEL_STA_REQ; |
| tdls_cfg.tdls_update_peer_state = WMA_UPDATE_TDLS_PEER_STATE; |
| tdls_cfg.tdls_del_all_peers = eWNI_SME_DEL_ALL_TDLS_PEERS; |
| tdls_cfg.tdls_update_dp_vdev_flags = CDP_UPDATE_TDLS_FLAGS; |
| tdls_cfg.tdls_event_cb = wlan_cfg80211_tdls_event_callback; |
| tdls_cfg.tdls_evt_cb_data = psoc; |
| tdls_cfg.tdls_tl_peer_data = hdd_ctx; |
| tdls_cfg.tdls_reg_tl_peer = hdd_tdls_register_tdls_peer; |
| tdls_cfg.tdls_dereg_tl_peer = hdd_tdls_deregister_tdl_peer; |
| tdls_cfg.tdls_wmm_cb = hdd_wmm_is_acm_allowed; |
| tdls_cfg.tdls_wmm_cb_data = psoc; |
| tdls_cfg.tdls_rx_cb = wlan_cfg80211_tdls_rx_callback; |
| tdls_cfg.tdls_rx_cb_data = psoc; |
| tdls_cfg.tdls_dp_vdev_update = hdd_update_dp_vdev_flags; |
| |
| status = ucfg_tdls_update_config(psoc, &tdls_cfg); |
| if (status != QDF_STATUS_SUCCESS) { |
| hdd_err("failed pmo psoc configuration"); |
| return -EINVAL; |
| } |
| |
| hdd_ctx->tdls_umac_comp_active = true; |
| /* disable napier specific tdls data path */ |
| hdd_ctx->tdls_nap_active = false; |
| |
| return 0; |
| } |
| #else |
| static int hdd_update_tdls_config(hdd_context_t *hdd_ctx) |
| { |
| hdd_ctx->tdls_umac_comp_active = false; |
| /* disable napier specific tdls data path */ |
| hdd_ctx->tdls_nap_active = false; |
| return 0; |
| } |
| #endif |
| |
| int hdd_update_components_config(hdd_context_t *hdd_ctx) |
| { |
| int ret; |
| |
| ret = hdd_update_pmo_config(hdd_ctx); |
| if (ret) |
| return ret; |
| ret = hdd_update_scan_config(hdd_ctx); |
| if (ret) |
| return ret; |
| ret = hdd_update_tdls_config(hdd_ctx); |
| |
| return ret; |
| } |
| |
| /** |
| * wlan_hdd_get_dfs_mode() - get ACS DFS mode |
| * @mode : cfg80211 DFS mode |
| * |
| * Return: return SAP ACS DFS mode else return ACS_DFS_MODE_NONE |
| */ |
| enum sap_acs_dfs_mode wlan_hdd_get_dfs_mode(enum dfs_mode mode) |
| { |
| switch (mode) { |
| case DFS_MODE_ENABLE: |
| return ACS_DFS_MODE_ENABLE; |
| case DFS_MODE_DISABLE: |
| return ACS_DFS_MODE_DISABLE; |
| case DFS_MODE_DEPRIORITIZE: |
| return ACS_DFS_MODE_DEPRIORITIZE; |
| default: |
| hdd_debug("ACS dfs mode is NONE"); |
| return ACS_DFS_MODE_NONE; |
| } |
| } |
| |
| /** |
| * hdd_enable_disable_ca_event() - enable/disable channel avoidance event |
| * @hddctx: pointer to hdd context |
| * @set_value: enable/disable |
| * |
| * When Host sends vendor command enable, FW will send *ONE* CA ind to |
| * Host(even though it is duplicate). When Host send vendor command |
| * disable,FW doesn't perform any action. Whenever any change in |
| * CA *and* WLAN is in SAP/P2P-GO mode, FW sends CA ind to host. |
| * |
| * return - 0 on success, appropriate error values on failure. |
| */ |
| int hdd_enable_disable_ca_event(hdd_context_t *hddctx, uint8_t set_value) |
| { |
| QDF_STATUS status; |
| |
| if (0 != wlan_hdd_validate_context(hddctx)) |
| return -EAGAIN; |
| |
| if (!hddctx->config->goptimize_chan_avoid_event) { |
| hdd_warn("goptimize_chan_avoid_event ini param disabled"); |
| return -EINVAL; |
| } |
| |
| status = sme_enable_disable_chanavoidind_event(hddctx->hHal, set_value); |
| if (!QDF_IS_STATUS_SUCCESS(status)) { |
| hdd_err("Failed to send chan avoid command to SME"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /** |
| * hdd_set_roaming_in_progress() - to set the roaming in progress flag |
| * @value: value to set |
| * |
| * This function will set the passed value to roaming in progress flag. |
| * |
| * Return: None |
| */ |
| void hdd_set_roaming_in_progress(bool value) |
| { |
| hdd_context_t *hdd_ctx; |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| if (!hdd_ctx) { |
| hdd_err("HDD context is NULL"); |
| return; |
| } |
| |
| hdd_ctx->roaming_in_progress = value; |
| hdd_debug("Roaming in Progress set to %d", value); |
| } |
| |
| /** |
| * hdd_is_roaming_in_progress() - check if roaming is in progress |
| * @adapter - HDD adapter |
| * |
| * Return: true if roaming is in progress for STA type, else false |
| */ |
| bool hdd_is_roaming_in_progress(hdd_adapter_t *adapter) |
| { |
| hdd_context_t *hdd_ctx; |
| bool ret_status = false; |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| if (!hdd_ctx) { |
| hdd_err("HDD context is NULL"); |
| return ret_status; |
| } |
| hdd_debug("dev mode = %d, roaming_in_progress = %d", |
| adapter->device_mode, hdd_ctx->roaming_in_progress); |
| ret_status = ((adapter->device_mode == QDF_STA_MODE) && |
| hdd_ctx->roaming_in_progress); |
| |
| return ret_status; |
| } |
| |
| /** |
| * hdd_is_connection_in_progress() - check if connection is in |
| * progress |
| * @session_id: session id |
| * @reason: scan reject reason |
| * |
| * Go through each adapter and check if Connection is in progress |
| * |
| * Return: true if connection is in progress else false |
| */ |
| bool hdd_is_connection_in_progress(uint8_t *session_id, |
| enum scan_reject_states *reason) |
| { |
| hdd_adapter_list_node_t *adapter_node = NULL, *next = NULL; |
| hdd_station_ctx_t *hdd_sta_ctx = NULL; |
| hdd_adapter_t *adapter = NULL; |
| QDF_STATUS status = 0; |
| uint8_t sta_id = 0; |
| uint8_t *sta_mac = NULL; |
| hdd_context_t *hdd_ctx; |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| if (!hdd_ctx) { |
| hdd_err("HDD context is NULL"); |
| return false; |
| } |
| |
| if (true == hdd_ctx->btCoexModeSet) { |
| hdd_info("BTCoex Mode operation in progress"); |
| return true; |
| } |
| status = hdd_get_front_adapter(hdd_ctx, &adapter_node); |
| while (NULL != adapter_node && QDF_STATUS_SUCCESS == status) { |
| adapter = adapter_node->pAdapter; |
| if (!adapter) |
| goto end; |
| |
| hdd_info("Adapter with device mode %s(%d) exists", |
| hdd_device_mode_to_string(adapter->device_mode), |
| adapter->device_mode); |
| if (((QDF_STA_MODE == adapter->device_mode) |
| || (QDF_P2P_CLIENT_MODE == adapter->device_mode) |
| || (QDF_P2P_DEVICE_MODE == adapter->device_mode)) |
| && (eConnectionState_Connecting == |
| (WLAN_HDD_GET_STATION_CTX_PTR(adapter))-> |
| conn_info.connState)) { |
| hdd_err("%p(%d) Connection is in progress", |
| WLAN_HDD_GET_STATION_CTX_PTR(adapter), |
| adapter->sessionId); |
| if (session_id && reason) { |
| *session_id = adapter->sessionId; |
| *reason = CONNECTION_IN_PROGRESS; |
| } |
| return true; |
| } |
| /* |
| * sme_neighbor_middle_of_roaming is for LFR2 |
| * hdd_is_roaming_in_progress is for LFR3 |
| */ |
| if (((QDF_STA_MODE == adapter->device_mode) && |
| sme_neighbor_middle_of_roaming( |
| WLAN_HDD_GET_HAL_CTX(adapter), |
| adapter->sessionId)) || |
| hdd_is_roaming_in_progress(adapter)) { |
| hdd_err("%p(%d) Reassociation in progress", |
| WLAN_HDD_GET_STATION_CTX_PTR(adapter), |
| adapter->sessionId); |
| if (session_id && reason) { |
| *session_id = adapter->sessionId; |
| *reason = REASSOC_IN_PROGRESS; |
| } |
| return true; |
| } |
| if ((QDF_STA_MODE == adapter->device_mode) || |
| (QDF_P2P_CLIENT_MODE == adapter->device_mode) || |
| (QDF_P2P_DEVICE_MODE == adapter->device_mode)) { |
| hdd_sta_ctx = |
| WLAN_HDD_GET_STATION_CTX_PTR(adapter); |
| if ((eConnectionState_Associated == |
| hdd_sta_ctx->conn_info.connState) |
| && (false == |
| hdd_sta_ctx->conn_info.uIsAuthenticated)) { |
| sta_mac = (uint8_t *) |
| &(adapter->macAddressCurrent.bytes[0]); |
| hdd_err("client " MAC_ADDRESS_STR |
| " is in middle of WPS/EAPOL exchange.", |
| MAC_ADDR_ARRAY(sta_mac)); |
| if (session_id && reason) { |
| *session_id = adapter->sessionId; |
| *reason = EAPOL_IN_PROGRESS; |
| } |
| return true; |
| } |
| } else if ((QDF_SAP_MODE == adapter->device_mode) || |
| (QDF_P2P_GO_MODE == adapter->device_mode)) { |
| for (sta_id = 0; sta_id < WLAN_MAX_STA_COUNT; |
| sta_id++) { |
| if (!((adapter->aStaInfo[sta_id].isUsed) |
| && (OL_TXRX_PEER_STATE_CONN == |
| adapter->aStaInfo[sta_id].tlSTAState))) |
| continue; |
| |
| sta_mac = (uint8_t *) |
| &(adapter->aStaInfo[sta_id]. |
| macAddrSTA.bytes[0]); |
| hdd_err("client " MAC_ADDRESS_STR |
| " of SAP/GO is in middle of WPS/EAPOL exchange", |
| MAC_ADDR_ARRAY(sta_mac)); |
| if (session_id && reason) { |
| *session_id = adapter->sessionId; |
| *reason = SAP_EAPOL_IN_PROGRESS; |
| } |
| return true; |
| } |
| if (hdd_ctx->connection_in_progress) { |
| hdd_err("AP/GO: connection is in progress"); |
| return true; |
| } |
| } |
| end: |
| status = hdd_get_next_adapter(hdd_ctx, adapter_node, &next); |
| adapter_node = next; |
| } |
| return false; |
| } |
| |
| /** |
| * hdd_restart_sap() - to restart SAP in driver internally |
| * @ap_adapter: Pointer to SAP hdd_adapter_t structure |
| * |
| * Return: None |
| */ |
| void hdd_restart_sap(hdd_adapter_t *ap_adapter) |
| { |
| hdd_ap_ctx_t *hdd_ap_ctx; |
| hdd_hostapd_state_t *hostapd_state; |
| QDF_STATUS qdf_status; |
| hdd_context_t *hdd_ctx = WLAN_HDD_GET_CTX(ap_adapter); |
| tsap_Config_t *sap_config; |
| void *sap_ctx; |
| |
| hdd_ap_ctx = WLAN_HDD_GET_AP_CTX_PTR(ap_adapter); |
| sap_config = &hdd_ap_ctx->sapConfig; |
| sap_ctx = hdd_ap_ctx->sapContext; |
| |
| mutex_lock(&hdd_ctx->sap_lock); |
| if (test_bit(SOFTAP_BSS_STARTED, &ap_adapter->event_flags)) { |
| wlan_hdd_del_station(ap_adapter); |
| hdd_cleanup_actionframe(hdd_ctx, ap_adapter); |
| hostapd_state = WLAN_HDD_GET_HOSTAP_STATE_PTR(ap_adapter); |
| qdf_event_reset(&hostapd_state->qdf_stop_bss_event); |
| if (QDF_STATUS_SUCCESS == wlansap_stop_bss(sap_ctx)) { |
| qdf_status = |
| qdf_wait_single_event(&hostapd_state-> |
| qdf_stop_bss_event, |
| SME_CMD_TIMEOUT_VALUE); |
| |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| cds_err("SAP Stop Failed"); |
| goto end; |
| } |
| } |
| clear_bit(SOFTAP_BSS_STARTED, &ap_adapter->event_flags); |
| policy_mgr_decr_session_set_pcl(hdd_ctx->hdd_psoc, |
| ap_adapter->device_mode, ap_adapter->sessionId); |
| cds_err("SAP Stop Success"); |
| |
| if (0 != wlan_hdd_cfg80211_update_apies(ap_adapter)) { |
| cds_err("SAP Not able to set AP IEs"); |
| wlansap_reset_sap_config_add_ie(sap_config, |
| eUPDATE_IE_ALL); |
| goto end; |
| } |
| |
| qdf_event_reset(&hostapd_state->qdf_event); |
| if (wlansap_start_bss(sap_ctx, hdd_hostapd_sap_event_cb, |
| sap_config, |
| ap_adapter->dev) != QDF_STATUS_SUCCESS) { |
| cds_err("SAP Start Bss fail"); |
| wlansap_reset_sap_config_add_ie(sap_config, |
| eUPDATE_IE_ALL); |
| goto end; |
| } |
| |
| cds_info("Waiting for SAP to start"); |
| qdf_status = |
| qdf_wait_single_event(&hostapd_state->qdf_event, |
| SME_CMD_TIMEOUT_VALUE); |
| wlansap_reset_sap_config_add_ie(sap_config, |
| eUPDATE_IE_ALL); |
| if (!QDF_IS_STATUS_SUCCESS(qdf_status)) { |
| cds_err("SAP Start failed"); |
| goto end; |
| } |
| cds_err("SAP Start Success"); |
| set_bit(SOFTAP_BSS_STARTED, &ap_adapter->event_flags); |
| if (hostapd_state->bssState == BSS_START) |
| policy_mgr_incr_active_session(hdd_ctx->hdd_psoc, |
| ap_adapter->device_mode, |
| ap_adapter->sessionId); |
| hostapd_state->bCommit = true; |
| } |
| end: |
| mutex_unlock(&hdd_ctx->sap_lock); |
| return; |
| } |
| |
| /** |
| * hdd_check_and_restart_sap_with_non_dfs_acs() - Restart SAP |
| * with non dfs acs |
| * |
| * Restarts SAP in non-DFS ACS mode when STA-AP mode DFS is not supported |
| * |
| * Return: None |
| */ |
| void hdd_check_and_restart_sap_with_non_dfs_acs(void) |
| { |
| hdd_adapter_t *ap_adapter; |
| hdd_context_t *hdd_ctx; |
| cds_context_type *cds_ctx; |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| if (!hdd_ctx) { |
| cds_err("HDD context is NULL"); |
| return; |
| } |
| |
| cds_ctx = cds_get_context(QDF_MODULE_ID_QDF); |
| if (!cds_ctx) { |
| cds_err("Invalid CDS Context"); |
| return; |
| } |
| |
| if (policy_mgr_get_concurrency_mode(hdd_ctx->hdd_psoc) |
| != (QDF_STA_MASK | QDF_SAP_MASK)) { |
| cds_info("Concurrency mode is not SAP"); |
| return; |
| } |
| |
| ap_adapter = hdd_get_adapter(hdd_ctx, QDF_SAP_MODE); |
| if (ap_adapter != NULL && test_bit(SOFTAP_BSS_STARTED, |
| &ap_adapter->event_flags) && |
| wlan_reg_is_dfs_ch(hdd_ctx->hdd_pdev, |
| ap_adapter->sessionCtx.ap.operatingChannel)) { |
| |
| cds_warn("STA-AP Mode DFS not supported. Restart SAP with Non DFS ACS"); |
| ap_adapter->sessionCtx.ap.sapConfig.channel = |
| AUTO_CHANNEL_SELECT; |
| ap_adapter->sessionCtx.ap.sapConfig. |
| acs_cfg.acs_mode = true; |
| |
| hdd_restart_sap(ap_adapter); |
| } |
| } |
| |
| /** |
| * hdd_set_connection_in_progress() - to set the connection in |
| * progress flag |
| * @value: value to set |
| * |
| * This function will set the passed value to connection in progress flag. |
| * If value is previously being set to true then no need to set it again. |
| * |
| * Return: true if value is being set correctly and false otherwise. |
| */ |
| bool hdd_set_connection_in_progress(bool value) |
| { |
| bool status = true; |
| hdd_context_t *hdd_ctx; |
| |
| hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| if (!hdd_ctx) { |
| cds_err("HDD context is NULL"); |
| return false; |
| } |
| |
| qdf_spin_lock(&hdd_ctx->connection_status_lock); |
| /* |
| * if the value is set to true previously and if someone is |
| * trying to make it true again then it could be some race |
| * condition being triggered. Avoid this situation by returning |
| * false |
| */ |
| if (hdd_ctx->connection_in_progress && value) |
| status = false; |
| else |
| hdd_ctx->connection_in_progress = value; |
| qdf_spin_unlock(&hdd_ctx->connection_status_lock); |
| return status; |
| } |
| |
| int wlan_hdd_send_p2p_quota(hdd_adapter_t *adapter, int set_value) |
| { |
| if (!adapter) { |
| hdd_err("Invalid adapter"); |
| return -EINVAL; |
| } |
| hdd_info("Send MCC P2P QUOTA to WMA: %d", set_value); |
| wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_MCC_SET_TIME_QUOTA, |
| set_value, VDEV_CMD); |
| return 0; |
| |
| } |
| |
| int wlan_hdd_send_mcc_latency(hdd_adapter_t *adapter, int set_value) |
| { |
| if (!adapter) { |
| hdd_err("Invalid adapter"); |
| return -EINVAL; |
| } |
| |
| hdd_info("Send MCC latency WMA: %d", set_value); |
| wma_cli_set_command(adapter->sessionId, |
| WMA_VDEV_MCC_SET_TIME_LATENCY, |
| set_value, VDEV_CMD); |
| return 0; |
| } |
| |
| hdd_adapter_t *wlan_hdd_get_adapter_from_vdev(struct wlan_objmgr_psoc |
| *psoc, uint8_t vdev_id) |
| { |
| hdd_adapter_t *adapter = NULL; |
| hdd_context_t *hdd_ctx = cds_get_context(QDF_MODULE_ID_HDD); |
| |
| /* |
| * Currently PSOC is not being used. But this logic will |
| * change once we have the converged implementation of |
| * HDD context per PSOC in place. This would break if |
| * multiple vdev objects reuse the vdev id. |
| */ |
| adapter = hdd_get_adapter_by_vdev(hdd_ctx, vdev_id); |
| if (!adapter) |
| hdd_err("Get adapter by vdev id failed"); |
| |
| return adapter; |
| } |
| |
| /* Register the module init/exit functions */ |
| module_init(hdd_module_init); |
| module_exit(hdd_module_exit); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_AUTHOR("Qualcomm Atheros, Inc."); |
| MODULE_DESCRIPTION("WLAN HOST DEVICE DRIVER"); |
| |
| module_param_call(con_mode, con_mode_handler, param_get_int, &con_mode, |
| S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); |
| |
| module_param_call(fwpath, fwpath_changed_handler, param_get_string, &fwpath, |
| S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); |
| |
| module_param(enable_dfs_chan_scan, int, S_IRUSR | S_IRGRP | S_IROTH); |
| |
| module_param(enable_11d, int, S_IRUSR | S_IRGRP | S_IROTH); |
| |
| module_param(country_code, charp, S_IRUSR | S_IRGRP | S_IROTH); |