| /* |
| * Copyright (c) 2012 - 2019 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /** |
| * DOC: This file contains centralized definitions of converged configuration. |
| */ |
| |
| #ifndef __CFG_COEX_H |
| #define __CFG_COEX_H |
| |
| /* |
| * <ini> |
| * gSetBTCMode - Config BTC mode |
| * @Min: 0 |
| * @Max: 2 |
| * @Default: 0 |
| * |
| * 0 - TDD |
| * 1 - FDD |
| * 2 - Hybrid |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_BTC_MODE CFG_INI_UINT( \ |
| "gSetBTCMode", \ |
| 0, \ |
| 2, \ |
| 0, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "BTC mode") |
| |
| /* |
| * <ini> |
| * gSetAntennaIsolation - Set Antenna Isolation |
| * @Min: 0 |
| * @Max: 255 |
| * @Default: 25 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_ANTENNA_ISOLATION CFG_INI_UINT( \ |
| "gSetAntennaIsolation", \ |
| 0, \ |
| 255, \ |
| 25, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Antenna Isolation") |
| |
| /* |
| * <ini> |
| * gSetMaxTxPowerForBTC - Set Max WLAN Tx power in COEX scenario |
| * @Min: 0 |
| * @Max: 100 |
| * @Default: 100 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_MAX_TX_POWER_FOR_BTC CFG_INI_UINT( \ |
| "gSetMaxTxPowerForBTC", \ |
| 0, \ |
| 100, \ |
| 100, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Max Tx Power for BTC") |
| |
| /* |
| * <ini> |
| * gSetWlanLowRssiThreshold - Set WLAN low RSSI threshold for BTC mode switching |
| * @Min: -100 |
| * @Max: 0 |
| * @Default: -80 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_WLAN_LOW_RSSI_THRESHOLD CFG_INI_INT( \ |
| "gSetWlanLowRssiThreshold", \ |
| -100, \ |
| 0, \ |
| -80, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "WLAN Low RSSI Threshold") |
| |
| /* |
| * <ini> |
| * gSetBtLowRssiThreshold - Set BT low RSSI threshold for BTC mode switching |
| * @Min: -100 |
| * @Max: 0 |
| * @Default: -80 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_BT_LOW_RSSI_THRESHOLD CFG_INI_INT( \ |
| "gSetBtLowRssiThreshold", \ |
| -100, \ |
| 0, \ |
| -80, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "BT Low RSSI Threshold") |
| |
| /* |
| * <ini> |
| * gSetBtInterferenceLowLL - Set lower limit of low level BT interference |
| * @Min: -100 |
| * @Max: 100 |
| * @Default: -25 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_BT_INTERFERENCE_LOW_LL CFG_INI_INT( \ |
| "gSetBtInterferenceLowLL", \ |
| -100, \ |
| 100, \ |
| -25, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "BT Interference Low LL") |
| |
| /* |
| * <ini> |
| * gSetBtInterferenceLowUL - Set upper limit of low level BT interference |
| * @Min: -100 |
| * @Max: 100 |
| * @Default: -21 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_BT_INTERFERENCE_LOW_UL CFG_INI_INT( \ |
| "gSetBtInterferenceLowUL", \ |
| -100, \ |
| 100, \ |
| -21, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "BT Interference Low UL") |
| |
| /* |
| * <ini> |
| * gSetBtInterferenceMediumLL - Set lower limit of medium level BT interference |
| * @Min: -100 |
| * @Max: 100 |
| * @Default: -20 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_BT_INTERFERENCE_MEDIUM_LL CFG_INI_INT( \ |
| "gSetBtInterferenceMediumLL", \ |
| -100, \ |
| 100, \ |
| -20, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "BT Interference Medium LL") |
| |
| /* |
| * <ini> |
| * gSetBtInterferenceMediumUL - Set upper limit of medium level BT interference |
| * @Min: -100 |
| * @Max: 100 |
| * @Default: -16 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_BT_INTERFERENCE_MEDIUM_UL CFG_INI_INT( \ |
| "gSetBtInterferenceMediumUL", \ |
| -100, \ |
| 100, \ |
| -16, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "BT Interference Medium UL") |
| |
| /* |
| * <ini> |
| * gSetBtInterferenceHighLL - Set lower limit of high level BT interference |
| * @Min: -100 |
| * @Max: 100 |
| * @Default: -15 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_BT_INTERFERENCE_HIGH_LL CFG_INI_INT( \ |
| "gSetBtInterferenceHighLL", \ |
| -100, \ |
| 100, \ |
| -15, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "BT Interference High LL") |
| |
| /* |
| * <ini> |
| * gSetBtInterferenceHighUL - Set upper limit of high level BT interference |
| * @Min: -100 |
| * @Max: 100 |
| * @Default: -11 |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_BT_INTERFERENCE_HIGH_UL CFG_INI_INT( \ |
| "gSetBtInterferenceHighUL", \ |
| -100, \ |
| 100, \ |
| -11, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "BT Interference High UL") |
| |
| #ifdef FEATURE_MPTA_HELPER |
| /* |
| * <ini> |
| * gMPTAHelperEnable - Enable MPTA Helper |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to enable or disable coex MPTA Helper. |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_COEX_MPTA_HELPER CFG_INI_BOOL( \ |
| "gMPTAHelperEnable", \ |
| 0, \ |
| "Enable/Disable MPTA Helper") |
| |
| #define COEX_MPTA_HELPER_CFG CFG(CFG_COEX_MPTA_HELPER) |
| #else |
| #define COEX_MPTA_HELPER_CFG |
| #endif |
| |
| #define CFG_COEX_ALL \ |
| CFG(CFG_BTC_MODE) \ |
| CFG(CFG_ANTENNA_ISOLATION) \ |
| CFG(CFG_MAX_TX_POWER_FOR_BTC) \ |
| CFG(CFG_WLAN_LOW_RSSI_THRESHOLD) \ |
| CFG(CFG_BT_LOW_RSSI_THRESHOLD) \ |
| CFG(CFG_BT_INTERFERENCE_LOW_LL) \ |
| CFG(CFG_BT_INTERFERENCE_LOW_UL) \ |
| CFG(CFG_BT_INTERFERENCE_MEDIUM_LL) \ |
| CFG(CFG_BT_INTERFERENCE_MEDIUM_UL) \ |
| CFG(CFG_BT_INTERFERENCE_HIGH_LL) \ |
| CFG(CFG_BT_INTERFERENCE_HIGH_UL) \ |
| COEX_MPTA_HELPER_CFG |
| #endif |