components/pmo/dispatcher/inc/wlan_pmo_common_public_struct.h - platform/vendor/qcom-opensource/wlan/qcacld-3.0 - Gitiles

 /*
  * Copyright (c) 2017-2018 The Linux Foundation. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for
  * any purpose with or without fee is hereby granted, provided that the
  * above copyright notice and this permission notice appear in all
  * copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
  * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
  * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
  * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
  * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  * PERFORMANCE OF THIS SOFTWARE.
  */
 /**
  * DOC: Declare various struct, macros which are common for
  * various pmo related features.
  *
  * Note: This file shall not contain public API's prototype/declartions.
  *
  */

 #ifndef _WLAN_PMO_COMMONP_PUBLIC_STRUCT_H_
 #define _WLAN_PMO_COMMONP_PUBLIC_STRUCT_H_

 #include "wlan_cmn.h"
 #include "wlan_objmgr_cmn.h"
 #include "wlan_objmgr_global_obj.h"
 #include "wlan_objmgr_psoc_obj.h"
 #include "wlan_objmgr_pdev_obj.h"
 #include "wlan_objmgr_vdev_obj.h"
 #include "wlan_objmgr_peer_obj.h"
 #include "wmi_unified.h"
 #include "qdf_status.h"
 #include "qdf_lock.h"
 #include "qdf_event.h"
 #include "wlan_pmo_hw_filter_public_struct.h"

 #define PMO_IPV4_ADDR_LEN         4

 #define PMO_IPV4_ARP_REPLY_OFFLOAD                  0
 #define PMO_IPV6_NEIGHBOR_DISCOVERY_OFFLOAD         1
 #define PMO_IPV6_NS_OFFLOAD                         2
 #define PMO_OFFLOAD_DISABLE                         0
 #define PMO_OFFLOAD_ENABLE                          1

 #define PMO_MAC_NS_OFFLOAD_SIZE               1
 #define PMO_MAC_NUM_TARGET_IPV6_NS_OFFLOAD_NA 16
 #define PMO_MAC_IPV6_ADDR_LEN                 16
 #define PMO_IPV6_ADDR_VALID                   1
 #define PMO_IPV6_ADDR_UC_TYPE                 0
 #define PMO_IPV6_ADDR_AC_TYPE                 1

 #define PMO_80211_ADDR_LEN  6  /* size of 802.11 address */

 #define PMO_WOW_REQUIRED_CREDITS 1

 /**
  * enum pmo_offload_type: tell offload type
  * @pmo_arp_offload: arp offload
  * @pmo_ns_offload: ns offload
  * @pmo_gtk_offload: gtk offload
  */
 enum pmo_offload_type {
 	pmo_arp_offload = 0,
 	pmo_ns_offload,
 	pmo_gtk_offload,
 };

 /**
  * enum pmo_vdev_param_id: tell vdev param id
  * @pmo_vdev_param_listen_interval: vdev listen interval param id
  * @pmo_vdev_param_dtim_policy: vdev param dtim policy
  * @pmo_vdev_max_param: Max vdev param id
  */
 enum pmo_vdev_param_id {
 	pmo_vdev_param_listen_interval = 0,
 	pmo_vdev_param_dtim_policy,
 	pmo_vdev_max_param
 };

 /**
  * enum pmo_beacon_dtim_policy: tell vdev beacon policy
  * @pmo_ignore_dtim: fwr need to igonre dtime policy
  * @pmo_normal_dtim: fwr need to use normal dtime policy
  * @pmo_stick_dtim: fwr need to use stick dtime policy
  * @auto_dtim: fwr need to auto dtime policy
  */
 enum pmo_beacon_dtim_policy {
 	pmo_ignore_dtim = 0x01,
 	pmo_normal_dtim = 0x02,
 	pmo_stick_dtim = 0x03,
 	pmo_auto_dtim = 0x04,
 };

 /**
  * @pmo_sta_ps_param_rx_wake_policy: Controls how frames are retrievd from AP
  *  while STA is sleeping.
  * @pmo_sta_ps_param_tx_wake_threshold: STA will go active after this many TX
  * @pmo_sta_ps_param_pspoll_count:No of PS-Poll to send before STA wakes up
  * @pmo_sta_ps_param_inactivity_time: TX/RX inactivity time in msec before
     going to sleep.
  * @pmo_sta_ps_param_uapsd: Set uapsd configuration.
  * @pmo_sta_ps_param_qpower_pspoll_count: No of PS-Poll to send before
     STA wakes up in QPower Mode.
  * @pmo_sta_ps_enable_qpower:  Enable QPower
  * @pmo_sta_ps_param_qpower_max_tx_before_wake: Number of TX frames before the
     entering the Active state
  */
 enum pmo_sta_powersave_param {
 	pmo_sta_ps_param_rx_wake_policy = 0,
 	pmo_sta_ps_param_tx_wake_threshold = 1,
 	pmo_sta_ps_param_pspoll_count = 2,
 	pmo_sta_ps_param_inactivity_time = 3,
 	pmo_sta_ps_param_uapsd = 4,
 	pmo_sta_ps_param_qpower_pspoll_count = 5,
 	pmo_sta_ps_enable_qpower = 6,
 	pmo_sta_ps_param_qpower_max_tx_before_wake = 7,
 };

 /**
  * enum powersave_qpower_mode: QPOWER modes
  * @pmo_qpower_disabled: Qpower is disabled
  * @pmo_qpower_enabled: Qpower is enabled
  * @pmo_qpower_duty_cycling: Qpower is enabled with duty cycling
  */
 enum pmo_power_save_qpower_mode {
 	pmo_qpower_disabled = 0,
 	pmo_qpower_enabled = 1,
 	pmo_qpower_duty_cycling = 2
 };

 /**
  * enum powersave_qpower_mode: powersave_mode
  * @pmo_ps_not_supported: Power save is not supported
  * @pmo_ps_legacy_no_deep_sleep: Legacy pwr save enabled and deep sleep disabled
  * @pmo_ps_qpower_no_deep_sleep: QPOWER enabled and deep sleep disabled
  * @pmo_ps_legacy_deep_sleep: Legacy power save enabled and deep sleep enabled
  * @pmo_ps_qpower_deep_sleep: QPOWER enabled and deep sleep enabled
  * @pmo_ps_duty_cycling_qpower: QPOWER enabled in duty cycling mode
  */
 enum pmo_powersave_mode {
 	pmo_ps_not_supported = 0,
 	pmo_ps_legacy_no_deep_sleep = 1,
 	pmo_ps_qpower_no_deep_sleep = 2,
 	pmo_ps_legacy_deep_sleep = 3,
 	pmo_ps_qpower_deep_sleep = 4,
 	pmo_ps_duty_cycling_qpower = 5
 };

 /**
  * enum wow_resume_trigger - resume trigger override setting values
  * @PMO_WOW_RESUME_TRIGGER_DEFAULT: fw to use platform default resume trigger
  * @PMO_WOW_RESUME_TRIGGER_HTC_WAKEUP: force fw to use HTC Wakeup to resume
  * @PMO_WOW_RESUME_TRIGGER_GPIO: force fw to use GPIO to resume
  * @PMO_WOW_RESUME_TRIGGER_COUNT: number of resume trigger options
  */
 enum pmo_wow_resume_trigger {
 	/* always first */
 	PMO_WOW_RESUME_TRIGGER_DEFAULT = 0,
 	PMO_WOW_RESUME_TRIGGER_HTC_WAKEUP,
 	PMO_WOW_RESUME_TRIGGER_GPIO,
 	/* always last */
 	PMO_WOW_RESUME_TRIGGER_COUNT
 };

 /**
  * enum wow_interface_pause - interface pause override setting values
  * @PMO_WOW_INTERFACE_PAUSE_DEFAULT: use platform default iface pause setting
  * @PMO_WOW_INTERFACE_PAUSE_ENABLE: force interface pause setting to enabled
  * @PMO_WOW_INTERFACE_PAUSE_DISABLE: force interface pause setting to disabled
  * @PMO_WOW_INTERFACE_PAUSE_COUNT: number of interface pause options
  */
 enum pmo_wow_interface_pause {
 	/* always first */
 	PMO_WOW_INTERFACE_PAUSE_DEFAULT = 0,
 	PMO_WOW_INTERFACE_PAUSE_ENABLE,
 	PMO_WOW_INTERFACE_PAUSE_DISABLE,
 	/* always last */
 	PMO_WOW_INTERFACE_PAUSE_COUNT
 };

 #define PMO_TARGET_SUSPEND_TIMEOUT   6000
 #define PMO_WAKE_LOCK_TIMEOUT        1000
 #define PMO_RESUME_TIMEOUT           6000

 /**
  * struct wow_enable_params - A collection of wow enable override parameters
  * @is_unit_test: true to notify fw this is a unit-test suspend
  * @interface_pause: used to override the interface pause indication sent to fw
  * @resume_trigger: used to force fw to use a particular resume method
  */
 struct pmo_wow_enable_params {
 	bool is_unit_test;
 	enum pmo_wow_interface_pause interface_pause;
 	enum pmo_wow_resume_trigger resume_trigger;
 };

 /**
  * typedef for psoc suspend handler
  */
 typedef QDF_STATUS(*pmo_psoc_suspend_handler)
 	(struct wlan_objmgr_psoc *psoc, void *arg);
 /**
  * typedef for psoc resume handler
  */
 typedef QDF_STATUS(*pmo_psoc_resume_handler)
 	(struct wlan_objmgr_psoc *psoc, void *arg);

 /**
  * enum pmo_offload_trigger: trigger information
  * @pmo_apps_suspend: trigger is apps suspend
  * @pmo_apps_resume: trigger is apps resume
  * @pmo_runtime_suspend: trigger is runtime suspend
  * @pmo_runtime_resume: trigger is runtime resume
  * @pmo_ipv4_change_notify: trigger is ipv4 change handler
  * @pmo_ipv6_change_notify: trigger is ipv6 change handler
  * @pmo_ns_offload_dynamic_update: enable/disable ns offload on the fly
  * @pmo_peer_disconnect: trigger is peer disconnect
  * @pmo_mcbc_setting_dynamic_update: mcbc value update on the fly
  *
  * @pmo_offload_trigger_max: Max trigger value
  */
 enum pmo_offload_trigger {
 	pmo_apps_suspend = 0,
 	pmo_apps_resume,
 	pmo_runtime_suspend,
 	pmo_runtime_resume,
 	pmo_ipv4_change_notify,
 	pmo_ipv6_change_notify,
 	pmo_mc_list_change_notify,
 	pmo_ns_offload_dynamic_update,
 	pmo_peer_disconnect,
 	pmo_mcbc_setting_dynamic_update,

 	pmo_offload_trigger_max,
 };

 /**
  * enum pmo_auto_pwr_detect_failure_mode_t - auto detect failure modes
  * @PMO_FW_TO_CRASH_ON_PWR_FAILURE: Don't register wow wakeup event and FW
  * crashes on power failure
  * @PMO_FW_TO_SEND_WOW_IND_ON_PWR_FAILURE: Register wow wakeup event and FW
  * sends failure event to host on power failure
  * @PMO_FW_TO_REJUVENATE_ON_PWR_FAILURE: Don't register wow wakeup event and
  * FW silently rejuvenate on power failure
  * @PMO_AUTO_PWR_FAILURE_DETECT_DISABLE: Don't register wow wakeup event and the
  * auto power failure detect feature is disabled in FW.
  */
 enum pmo_auto_pwr_detect_failure_mode {
 	PMO_FW_TO_CRASH_ON_PWR_FAILURE,
 	PMO_FW_TO_SEND_WOW_IND_ON_PWR_FAILURE,
 	PMO_FW_TO_REJUVENATE_ON_PWR_FAILURE,
 	PMO_AUTO_PWR_FAILURE_DETECT_DISABLE
 };

 /**
  * struct pmo_psoc_cfg - user configuration required for pmo
  * @ptrn_match_enable_all_vdev: true when pattern match is enable for all vdev
  * @apf_enable: true if psoc supports apf else false
  * @arp_offload_enable: true if arp offload is supported for psoc else false
  * @hw_filter_mode_bitmap: which mode the hardware filter should use during DTIM
  * @ns_offload_enable_static: true if psoc supports ns offload in ini else false
  * @ns_offload_enable_dynamic: to enable / disable the ns offload using
  *    ioctl or vendor command.
  * @packet_filter_enabled: true if feature is enabled by configuration
  * @ssdp:  true if psoc supports if ssdp configuration in wow mode
  * @enable_mc_list: true if psoc supports mc addr list else false
  * @active_mode_offload: true if psoc supports active mode offload else false
  * @ap_arpns_support: true if psoc supports arp ns for ap mode
  * @d0_wow_supported: true if psoc supports D0 wow command
  * @ra_ratelimit_enable: true when ra filtering ins eanbled else false
  * @ra_ratelimit_interval: ra packets interval
  * @magic_ptrn_enable: true when magic pattern is enabled else false
  * @deauth_enable: true when wake up on deauth is enabled else false
  * @disassoc_enable:  true when wake up on disassoc is enabled else false
  * @bmiss_enable: true when wake up on bmiss is enabled else false
  * @lpass_enable: true when lpass is enabled else false
  * @sta_dynamic_dtim: station dynamic DTIM value
  * @sta_mod_dtim: station modulated DTIM value
  * @sta_max_li_mod_dtim: station max listen interval DTIM value
  * @power_save_mode: power save mode for psoc
  * @auto_power_save_fail_mode: auto detect power save failure
  */
 struct pmo_psoc_cfg {
 	bool ptrn_match_enable_all_vdev;
 	bool apf_enable;
 	bool arp_offload_enable;
 	enum pmo_hw_filter_mode hw_filter_mode_bitmap;
 	bool ns_offload_enable_static;
 	bool ns_offload_enable_dynamic;
 	bool packet_filter_enabled;
 	bool ssdp;
 	bool enable_mc_list;
 	bool active_mode_offload;
 	bool ap_arpns_support;
 	bool d0_wow_supported;
 	bool ra_ratelimit_enable;
 	uint16_t ra_ratelimit_interval;
 	bool magic_ptrn_enable;
 	bool deauth_enable;
 	bool disassoc_enable;
 	bool bmiss_enable;
 	bool lpass_enable;
 	uint8_t sta_dynamic_dtim;
 	uint8_t sta_mod_dtim;
 	uint8_t sta_max_li_mod_dtim;
 	uint8_t power_save_mode;
 	enum pmo_auto_pwr_detect_failure_mode auto_power_save_fail_mode;
 };

 /**
  * pmo_device_caps - device capability flags (true if feature is supported)
  * @apf: Android Packet Filter (aka BPF)
  * @arp_ns_offload: APR/NS offload
  * @packet_filter: Legacy "Packet Filter"
  * @unified_wow: Firmware supports "interface pause" flag in WoW command.
  *	This allows both D0-WoW (bus up) and Non-D0-WoW (bus down) to use one
  *	unified command
  * @li_offload: Firmware has listen interval offload support
  */
 struct pmo_device_caps {
 	bool apf;
 	bool arp_ns_offload;
 	bool packet_filter;
 	bool unified_wow;
 	bool li_offload;
 };

 #endif /* end  of _WLAN_PMO_COMMONP_STRUCT_H_ */
	/*
	* Copyright (c) 2017-2018 The Linux Foundation. All rights reserved.
	*
	* Permission to use, copy, modify, and/or distribute this software for
	* any purpose with or without fee is hereby granted, provided that the
	* above copyright notice and this permission notice appear in all
	* copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
	* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
	* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
	* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
	* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
	* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
	* PERFORMANCE OF THIS SOFTWARE.
	*/
	/**
	* DOC: Declare various struct, macros which are common for
	* various pmo related features.
	*
	* Note: This file shall not contain public API's prototype/declartions.
	*
	*/

	#ifndef _WLAN_PMO_COMMONP_PUBLIC_STRUCT_H_
	#define _WLAN_PMO_COMMONP_PUBLIC_STRUCT_H_

	#include "wlan_cmn.h"
	#include "wlan_objmgr_cmn.h"
	#include "wlan_objmgr_global_obj.h"
	#include "wlan_objmgr_psoc_obj.h"
	#include "wlan_objmgr_pdev_obj.h"
	#include "wlan_objmgr_vdev_obj.h"
	#include "wlan_objmgr_peer_obj.h"
	#include "wmi_unified.h"
	#include "qdf_status.h"
	#include "qdf_lock.h"
	#include "qdf_event.h"
	#include "wlan_pmo_hw_filter_public_struct.h"

	#define PMO_IPV4_ADDR_LEN 4

	#define PMO_IPV4_ARP_REPLY_OFFLOAD 0
	#define PMO_IPV6_NEIGHBOR_DISCOVERY_OFFLOAD 1
	#define PMO_IPV6_NS_OFFLOAD 2
	#define PMO_OFFLOAD_DISABLE 0
	#define PMO_OFFLOAD_ENABLE 1

	#define PMO_MAC_NS_OFFLOAD_SIZE 1
	#define PMO_MAC_NUM_TARGET_IPV6_NS_OFFLOAD_NA 16
	#define PMO_MAC_IPV6_ADDR_LEN 16
	#define PMO_IPV6_ADDR_VALID 1
	#define PMO_IPV6_ADDR_UC_TYPE 0
	#define PMO_IPV6_ADDR_AC_TYPE 1

	#define PMO_80211_ADDR_LEN 6 /* size of 802.11 address */

	#define PMO_WOW_REQUIRED_CREDITS 1

	/**
	* enum pmo_offload_type: tell offload type
	* @pmo_arp_offload: arp offload
	* @pmo_ns_offload: ns offload
	* @pmo_gtk_offload: gtk offload
	*/
	enum pmo_offload_type {
	pmo_arp_offload = 0,
	pmo_ns_offload,
	pmo_gtk_offload,
	};

	/**
	* enum pmo_vdev_param_id: tell vdev param id
	* @pmo_vdev_param_listen_interval: vdev listen interval param id
	* @pmo_vdev_param_dtim_policy: vdev param dtim policy
	* @pmo_vdev_max_param: Max vdev param id
	*/
	enum pmo_vdev_param_id {
	pmo_vdev_param_listen_interval = 0,
	pmo_vdev_param_dtim_policy,
	pmo_vdev_max_param
	};

	/**
	* enum pmo_beacon_dtim_policy: tell vdev beacon policy
	* @pmo_ignore_dtim: fwr need to igonre dtime policy
	* @pmo_normal_dtim: fwr need to use normal dtime policy
	* @pmo_stick_dtim: fwr need to use stick dtime policy
	* @auto_dtim: fwr need to auto dtime policy
	*/
	enum pmo_beacon_dtim_policy {
	pmo_ignore_dtim = 0x01,
	pmo_normal_dtim = 0x02,
	pmo_stick_dtim = 0x03,
	pmo_auto_dtim = 0x04,
	};

	/**
	* @pmo_sta_ps_param_rx_wake_policy: Controls how frames are retrievd from AP
	* while STA is sleeping.
	* @pmo_sta_ps_param_tx_wake_threshold: STA will go active after this many TX
	* @pmo_sta_ps_param_pspoll_count:No of PS-Poll to send before STA wakes up
	* @pmo_sta_ps_param_inactivity_time: TX/RX inactivity time in msec before
	going to sleep.
	* @pmo_sta_ps_param_uapsd: Set uapsd configuration.
	* @pmo_sta_ps_param_qpower_pspoll_count: No of PS-Poll to send before
	STA wakes up in QPower Mode.
	* @pmo_sta_ps_enable_qpower: Enable QPower
	* @pmo_sta_ps_param_qpower_max_tx_before_wake: Number of TX frames before the
	entering the Active state
	*/
	enum pmo_sta_powersave_param {
	pmo_sta_ps_param_rx_wake_policy = 0,
	pmo_sta_ps_param_tx_wake_threshold = 1,
	pmo_sta_ps_param_pspoll_count = 2,
	pmo_sta_ps_param_inactivity_time = 3,
	pmo_sta_ps_param_uapsd = 4,
	pmo_sta_ps_param_qpower_pspoll_count = 5,
	pmo_sta_ps_enable_qpower = 6,
	pmo_sta_ps_param_qpower_max_tx_before_wake = 7,
	};

	/**
	* enum powersave_qpower_mode: QPOWER modes
	* @pmo_qpower_disabled: Qpower is disabled
	* @pmo_qpower_enabled: Qpower is enabled
	* @pmo_qpower_duty_cycling: Qpower is enabled with duty cycling
	*/
	enum pmo_power_save_qpower_mode {
	pmo_qpower_disabled = 0,
	pmo_qpower_enabled = 1,
	pmo_qpower_duty_cycling = 2
	};

	/**
	* enum powersave_qpower_mode: powersave_mode
	* @pmo_ps_not_supported: Power save is not supported
	* @pmo_ps_legacy_no_deep_sleep: Legacy pwr save enabled and deep sleep disabled
	* @pmo_ps_qpower_no_deep_sleep: QPOWER enabled and deep sleep disabled
	* @pmo_ps_legacy_deep_sleep: Legacy power save enabled and deep sleep enabled
	* @pmo_ps_qpower_deep_sleep: QPOWER enabled and deep sleep enabled
	* @pmo_ps_duty_cycling_qpower: QPOWER enabled in duty cycling mode
	*/
	enum pmo_powersave_mode {
	pmo_ps_not_supported = 0,
	pmo_ps_legacy_no_deep_sleep = 1,
	pmo_ps_qpower_no_deep_sleep = 2,
	pmo_ps_legacy_deep_sleep = 3,
	pmo_ps_qpower_deep_sleep = 4,
	pmo_ps_duty_cycling_qpower = 5
	};

	/**
	* enum wow_resume_trigger - resume trigger override setting values
	* @PMO_WOW_RESUME_TRIGGER_DEFAULT: fw to use platform default resume trigger
	* @PMO_WOW_RESUME_TRIGGER_HTC_WAKEUP: force fw to use HTC Wakeup to resume
	* @PMO_WOW_RESUME_TRIGGER_GPIO: force fw to use GPIO to resume
	* @PMO_WOW_RESUME_TRIGGER_COUNT: number of resume trigger options
	*/
	enum pmo_wow_resume_trigger {
	/* always first */
	PMO_WOW_RESUME_TRIGGER_DEFAULT = 0,
	PMO_WOW_RESUME_TRIGGER_HTC_WAKEUP,
	PMO_WOW_RESUME_TRIGGER_GPIO,
	/* always last */
	PMO_WOW_RESUME_TRIGGER_COUNT
	};

	/**
	* enum wow_interface_pause - interface pause override setting values
	* @PMO_WOW_INTERFACE_PAUSE_DEFAULT: use platform default iface pause setting
	* @PMO_WOW_INTERFACE_PAUSE_ENABLE: force interface pause setting to enabled
	* @PMO_WOW_INTERFACE_PAUSE_DISABLE: force interface pause setting to disabled
	* @PMO_WOW_INTERFACE_PAUSE_COUNT: number of interface pause options
	*/
	enum pmo_wow_interface_pause {
	/* always first */
	PMO_WOW_INTERFACE_PAUSE_DEFAULT = 0,
	PMO_WOW_INTERFACE_PAUSE_ENABLE,
	PMO_WOW_INTERFACE_PAUSE_DISABLE,
	/* always last */
	PMO_WOW_INTERFACE_PAUSE_COUNT
	};

	#define PMO_TARGET_SUSPEND_TIMEOUT 6000
	#define PMO_WAKE_LOCK_TIMEOUT 1000
	#define PMO_RESUME_TIMEOUT 6000

	/**
	* struct wow_enable_params - A collection of wow enable override parameters
	* @is_unit_test: true to notify fw this is a unit-test suspend
	* @interface_pause: used to override the interface pause indication sent to fw
	* @resume_trigger: used to force fw to use a particular resume method
	*/
	struct pmo_wow_enable_params {
	bool is_unit_test;
	enum pmo_wow_interface_pause interface_pause;
	enum pmo_wow_resume_trigger resume_trigger;
	};

	/**
	* typedef for psoc suspend handler
	*/
	typedef QDF_STATUS(*pmo_psoc_suspend_handler)
	(struct wlan_objmgr_psoc psoc, void arg);
	/**
	* typedef for psoc resume handler
	*/
	typedef QDF_STATUS(*pmo_psoc_resume_handler)
	(struct wlan_objmgr_psoc psoc, void arg);

	/**
	* enum pmo_offload_trigger: trigger information
	* @pmo_apps_suspend: trigger is apps suspend
	* @pmo_apps_resume: trigger is apps resume
	* @pmo_runtime_suspend: trigger is runtime suspend
	* @pmo_runtime_resume: trigger is runtime resume
	* @pmo_ipv4_change_notify: trigger is ipv4 change handler
	* @pmo_ipv6_change_notify: trigger is ipv6 change handler
	* @pmo_ns_offload_dynamic_update: enable/disable ns offload on the fly
	* @pmo_peer_disconnect: trigger is peer disconnect
	* @pmo_mcbc_setting_dynamic_update: mcbc value update on the fly
	*
	* @pmo_offload_trigger_max: Max trigger value
	*/
	enum pmo_offload_trigger {
	pmo_apps_suspend = 0,
	pmo_apps_resume,
	pmo_runtime_suspend,
	pmo_runtime_resume,
	pmo_ipv4_change_notify,
	pmo_ipv6_change_notify,
	pmo_mc_list_change_notify,
	pmo_ns_offload_dynamic_update,
	pmo_peer_disconnect,
	pmo_mcbc_setting_dynamic_update,

	pmo_offload_trigger_max,
	};

	/**
	* enum pmo_auto_pwr_detect_failure_mode_t - auto detect failure modes
	* @PMO_FW_TO_CRASH_ON_PWR_FAILURE: Don't register wow wakeup event and FW
	* crashes on power failure
	* @PMO_FW_TO_SEND_WOW_IND_ON_PWR_FAILURE: Register wow wakeup event and FW
	* sends failure event to host on power failure
	* @PMO_FW_TO_REJUVENATE_ON_PWR_FAILURE: Don't register wow wakeup event and
	* FW silently rejuvenate on power failure
	* @PMO_AUTO_PWR_FAILURE_DETECT_DISABLE: Don't register wow wakeup event and the
	* auto power failure detect feature is disabled in FW.
	*/
	enum pmo_auto_pwr_detect_failure_mode {
	PMO_FW_TO_CRASH_ON_PWR_FAILURE,
	PMO_FW_TO_SEND_WOW_IND_ON_PWR_FAILURE,
	PMO_FW_TO_REJUVENATE_ON_PWR_FAILURE,
	PMO_AUTO_PWR_FAILURE_DETECT_DISABLE
	};

	/**
	* struct pmo_psoc_cfg - user configuration required for pmo
	* @ptrn_match_enable_all_vdev: true when pattern match is enable for all vdev
	* @apf_enable: true if psoc supports apf else false
	* @arp_offload_enable: true if arp offload is supported for psoc else false
	* @hw_filter_mode_bitmap: which mode the hardware filter should use during DTIM
	* @ns_offload_enable_static: true if psoc supports ns offload in ini else false
	* @ns_offload_enable_dynamic: to enable / disable the ns offload using
	* ioctl or vendor command.
	* @packet_filter_enabled: true if feature is enabled by configuration
	* @ssdp: true if psoc supports if ssdp configuration in wow mode
	* @enable_mc_list: true if psoc supports mc addr list else false
	* @active_mode_offload: true if psoc supports active mode offload else false
	* @ap_arpns_support: true if psoc supports arp ns for ap mode
	* @d0_wow_supported: true if psoc supports D0 wow command
	* @ra_ratelimit_enable: true when ra filtering ins eanbled else false
	* @ra_ratelimit_interval: ra packets interval
	* @magic_ptrn_enable: true when magic pattern is enabled else false
	* @deauth_enable: true when wake up on deauth is enabled else false
	* @disassoc_enable: true when wake up on disassoc is enabled else false
	* @bmiss_enable: true when wake up on bmiss is enabled else false
	* @lpass_enable: true when lpass is enabled else false
	* @sta_dynamic_dtim: station dynamic DTIM value
	* @sta_mod_dtim: station modulated DTIM value
	* @sta_max_li_mod_dtim: station max listen interval DTIM value
	* @power_save_mode: power save mode for psoc
	* @auto_power_save_fail_mode: auto detect power save failure
	*/
	struct pmo_psoc_cfg {
	bool ptrn_match_enable_all_vdev;
	bool apf_enable;
	bool arp_offload_enable;
	enum pmo_hw_filter_mode hw_filter_mode_bitmap;
	bool ns_offload_enable_static;
	bool ns_offload_enable_dynamic;
	bool packet_filter_enabled;
	bool ssdp;
	bool enable_mc_list;
	bool active_mode_offload;
	bool ap_arpns_support;
	bool d0_wow_supported;
	bool ra_ratelimit_enable;
	uint16_t ra_ratelimit_interval;
	bool magic_ptrn_enable;
	bool deauth_enable;
	bool disassoc_enable;
	bool bmiss_enable;
	bool lpass_enable;
	uint8_t sta_dynamic_dtim;
	uint8_t sta_mod_dtim;
	uint8_t sta_max_li_mod_dtim;
	uint8_t power_save_mode;
	enum pmo_auto_pwr_detect_failure_mode auto_power_save_fail_mode;
	};

	/**
	* pmo_device_caps - device capability flags (true if feature is supported)
	* @apf: Android Packet Filter (aka BPF)
	* @arp_ns_offload: APR/NS offload
	* @packet_filter: Legacy "Packet Filter"
	* @unified_wow: Firmware supports "interface pause" flag in WoW command.
	* This allows both D0-WoW (bus up) and Non-D0-WoW (bus down) to use one
	* unified command
	* @li_offload: Firmware has listen interval offload support
	*/
	struct pmo_device_caps {
	bool apf;
	bool arp_ns_offload;
	bool packet_filter;
	bool unified_wow;
	bool li_offload;
	};

	#endif /* end of _WLAN_PMO_COMMONP_STRUCT_H_ */