| /* |
| * Copyright (c) 2018-2020 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #if !defined(CONFIG_TDLS_H__) |
| #define CONFIG_TDLS_H__ |
| |
| #include "cfg_define.h" |
| #include "cfg_converged.h" |
| #include "qdf_types.h" |
| |
| /* |
| * <ini> |
| * gTDLSUapsdMask - ACs to setup U-APSD for TDLS Sta. |
| * @Min: 0 |
| * @Max: 0x0F |
| * @Default: 0x0F |
| * |
| * This ini is used to configure the ACs for which mask needs to be enabled. |
| * 0x1: Background 0x2: Best effort |
| * 0x4: Video 0x8: Voice |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_QOS_WMM_UAPSD_MASK CFG_INI_UINT( \ |
| "gTDLSUapsdMask", \ |
| 0, \ |
| 0x0F, \ |
| 0x0F, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "ACs to setup U-APSD for TDLS Sta") |
| |
| /* |
| * <ini> |
| * gEnableTDLSBufferSta - Controls the TDLS buffer. |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * This ini is used to control the TDLS buffer. |
| * Buffer STA is not enabled in CLD 2.0 yet. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_BUF_STA_ENABLED CFG_INI_BOOL( \ |
| "gEnableTDLSBufferSta", \ |
| 1, \ |
| "Controls the TDLS buffer") |
| |
| /* |
| * <ini> |
| * gTDLSPuapsdInactivityTime - Peer UAPSD Inactivity time. |
| * @Min: 0 |
| * @Max: 10 |
| * @Default: 0 |
| * |
| * This ini is used to configure peer uapsd inactivity time(in ms). |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_PUAPSD_INACT_TIME CFG_INI_UINT( \ |
| "gTDLSPuapsdInactivityTime", \ |
| 0, \ |
| 10, \ |
| 0, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Peer UAPSD Inactivity time") |
| |
| /* |
| * <ini> |
| * gTDLSPuapsdRxFrameThreshold - Peer UAPSD Rx frame threshold. |
| * @Min: 10 |
| * @Max: 20 |
| * @Default: 10 |
| * |
| * This ini is used to configure maximum Rx frame during SP. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_RX_FRAME_THRESHOLD CFG_INI_UINT( \ |
| "gTDLSPuapsdRxFrameThreshold", \ |
| 10, \ |
| 20, \ |
| 10, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Peer UAPSD Rx frame threshold") |
| |
| /* |
| * <ini> |
| * gEnableTDLSOffChannel - Enables off-channel support for TDLS link. |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to enable/disable off-channel support for TDLS link. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_OFF_CHANNEL_ENABLED CFG_INI_BOOL( \ |
| "gEnableTDLSOffChannel", \ |
| 0, \ |
| "Enables off-channel support for TDLS") |
| |
| /* |
| * <ini> |
| * gEnableTDLSSupport - Enable support for TDLS. |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to enable/disable TDLS support. |
| * |
| * Related: None. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_SUPPORT_ENABLE CFG_INI_BOOL( \ |
| "gEnableTDLSSupport", \ |
| 0, \ |
| "enable/disable TDLS support") |
| |
| /* |
| * <ini> |
| * gEnableTDLSImplicitTrigger - Enable Implicit TDLS. |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to enable/disable implicit TDLS. |
| * CLD driver initiates TDLS Discovery towards a peer whenever TDLS Setup |
| * criteria (throughput and RSSI thresholds) is met and then it tears down |
| * TDLS when teardown criteria (idle packet count and RSSI) is met. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_IMPLICIT_TRIGGER CFG_INI_BOOL( \ |
| "gEnableTDLSImplicitTrigger", \ |
| 0, \ |
| "enable/disable implicit TDLS") |
| |
| /* |
| * <ini> |
| * gTDLSTxStatsPeriod - TDLS TX statistics time period. |
| * @Min: 1000 |
| * @Max: 4294967295 |
| * @Default: 2000 |
| * |
| * This ini is used to configure the time period (in ms) to evaluate whether |
| * the number of Tx/Rx packets exceeds TDLSTxPacketThreshold and triggers a |
| * TDLS Discovery request. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_TX_STATS_PERIOD CFG_INI_UINT( \ |
| "gTDLSTxStatsPeriod", \ |
| 1000, \ |
| 4294967295UL, \ |
| 2000, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "TDLS TX statistics time period") |
| |
| /* |
| * <ini> |
| * gTDLSTxPacketThreshold - Tx/Rx Packet threshold for initiating TDLS. |
| * @Min: 0 |
| * @Max: 4294967295 |
| * @Default: 40 |
| * |
| * This ini is used to configure the number of Tx/Rx packets during the |
| * period of gTDLSTxStatsPeriod when exceeded, a TDLS Discovery request |
| * is triggered. |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_TX_PACKET_THRESHOLD CFG_INI_UINT( \ |
| "gTDLSTxPacketThreshold", \ |
| 0, \ |
| 4294967295UL, \ |
| 40, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Tx/Rx Packet threshold for initiating TDLS") |
| |
| /* |
| * <ini> |
| * gTDLSMaxDiscoveryAttempt - Attempts for sending TDLS discovery requests. |
| * @Min: 1 |
| * @Max: 100 |
| * @Default: 5 |
| * |
| * This ini is used to configure the number of failures of discover request, |
| * when exceeded, the peer is assumed to be not TDLS capable and no further |
| * TDLS Discovery request is made. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_MAX_DISCOVERY_ATTEMPT CFG_INI_UINT( \ |
| "gTDLSMaxDiscoveryAttempt", \ |
| 1, \ |
| 100, \ |
| 5, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Attempts for sending TDLS discovery requests") |
| |
| /* |
| * gTDLSMaxPeerCount - Max TDLS connected peer count |
| * @Min: 1 |
| * @Max: 8 |
| * @Default: 8 |
| * |
| * This ini is used to configure the max connected TDLS peer count. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_MAX_PEER_COUNT CFG_INI_UINT( \ |
| "gTDLSMaxPeerCount", \ |
| 1, \ |
| 8, \ |
| 8, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Max TDLS peer count") |
| |
| /* |
| * <ini> |
| * gTDLSIdleTimeout - Duration within which number of TX / RX frames meet the |
| * criteria for TDLS teardown. |
| * @Min: 500 |
| * @Max: 40000 |
| * @Default: 5000 |
| * |
| * This ini is used to configure the time period (in ms) to evaluate whether |
| * the number of Tx/Rx packets exceeds gTDLSIdlePacketThreshold and thus meets |
| * criteria for TDLS teardown. |
| * Teardown notification interval (gTDLSIdleTimeout) should be multiple of |
| * setup notification (gTDLSTxStatsPeriod) interval. |
| * e.g. |
| * if setup notification (gTDLSTxStatsPeriod) interval = 500, then |
| * teardown notification (gTDLSIdleTimeout) interval should be 1000, |
| * 1500, 2000, 2500... |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| */ |
| #define CFG_TDLS_IDLE_TIMEOUT CFG_INI_UINT( \ |
| "gTDLSIdleTimeout", \ |
| 500, \ |
| 40000, \ |
| 5000, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "this is idle time period") |
| |
| /* |
| * <ini> |
| * gTDLSIdlePacketThreshold - Number of idle packet. |
| * @Min: 0 |
| * @Max: 40000 |
| * @Default: 3 |
| * |
| * This ini is used to configure the number of Tx/Rx packet, below which |
| * within last gTDLSTxStatsPeriod period is considered as idle condition. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_IDLE_PACKET_THRESHOLD CFG_INI_UINT( \ |
| "gTDLSIdlePacketThreshold", \ |
| 0, \ |
| 40000, \ |
| 3, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Number of idle packet") |
| |
| /* |
| * <ini> |
| * gTDLSRSSITriggerThreshold - RSSI threshold for TDLS connection. |
| * @Min: -120 |
| * @Max: 0 |
| * @Default: -75 |
| * |
| * This ini is used to configure the absolute value (in dB) of the peer RSSI, |
| * below which a TDLS setup request is triggered. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_RSSI_TRIGGER_THRESHOLD CFG_INI_INT( \ |
| "gTDLSRSSITriggerThreshold", \ |
| -120, \ |
| 0, \ |
| -75, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "RSSI threshold for TDLS connection") |
| |
| /* |
| * <ini> |
| * gTDLSRSSITeardownThreshold - RSSI threshold for TDLS teardown. |
| * @Min: -120 |
| * @Max: 0 |
| * @Default: -75 |
| * |
| * This ini is used to configure the absolute value (in dB) of the peer RSSI, |
| * when exceed, a TDLS teardown is triggered. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_RSSI_TEARDOWN_THRESHOLD CFG_INI_INT( \ |
| "gTDLSRSSITeardownThreshold", \ |
| -120, \ |
| 0, \ |
| -75, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "RSSI threshold for TDLS teardown") |
| |
| /* |
| * <ini> |
| * gTDLSRSSIDelta - Delta value for the peer RSSI that can trigger teardown. |
| * @Min: -30 |
| * @Max: 0 |
| * @Default: -20 |
| * |
| * This ini is used to configure delta for peer RSSI such that if Peer RSSI |
| * is less than AP RSSI plus delta will trigger a teardown. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_RSSI_DELTA CFG_INI_INT( \ |
| "gTDLSRSSIDelta", \ |
| -30, \ |
| 0, \ |
| -20, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Delta value for the peer RSSI that can trigger teardown") |
| |
| /* |
| * <ini> |
| * gTDLSPrefOffChanNum - Preferred TDLS channel number when off-channel support |
| * is enabled. |
| * @Min: 1 |
| * @Max: 165 |
| * @Default: 36 |
| * |
| * This ini is used to configure preferred TDLS channel number when off-channel |
| * support is enabled. |
| * |
| * Related: gEnableTDLSSupport, gEnableTDLSOffChannel. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_PREFERRED_OFF_CHANNEL_NUM CFG_INI_UINT( \ |
| "gTDLSPrefOffChanNum", \ |
| 1, \ |
| 165, \ |
| 36, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Preferred TDLS channel number") |
| |
| /* |
| * <ini> |
| * gTDLSPrefOffChanBandwidth - Preferred TDLS channel bandwidth when |
| * off-channel support is enabled. |
| * @Min: 0x01 |
| * @Max: 0x0F |
| * @Default: 0x07 |
| * |
| * This ini is used to configure preferred TDLS channel bandwidth when |
| * off-channel support is enabled. |
| * 0x1: 20 MHz 0x2: 40 MHz 0x4: 80 MHz 0x8: 160 MHz |
| * When more than one bits are set then firmware starts from the highest and |
| * selects one based on capability of peer. |
| * |
| * Related: gEnableTDLSSupport, gEnableTDLSOffChannel. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_PREFERRED_OFF_CHANNEL_BW CFG_INI_UINT( \ |
| "gTDLSPrefOffChanBandwidth", \ |
| 1, \ |
| 15, \ |
| 7, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Preferred TDLS channel bandwidth") |
| |
| /* |
| * <ini> |
| * gTDLSPuapsdPTIWindow - This ini is used to configure peer traffic indication |
| * window. |
| * @Min: 1 |
| * @Max: 5 |
| * @Default: 2 |
| * |
| * This ini is used to configure buffering time in number of beacon intervals. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_PUAPSD_PEER_TRAFFIC_IND_WINDOW CFG_INI_UINT( \ |
| "gTDLSPuapsdPTIWindow", \ |
| 1, \ |
| 5, \ |
| 2, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "This ini is used to configure peer traffic indication") |
| |
| /* |
| * <ini> |
| * gTDLSPuapsdPTIWindow - This ini is used to configure peer traffic indication |
| * window. |
| * @Min: 1 |
| * @Max: 5 |
| * @Default: 2 |
| * |
| * This ini is used to configure buffering time in number of beacon intervals. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_PUAPSD_PEER_TRAFFIC_RSP_TIMEOUT CFG_INI_UINT( \ |
| "gTDLSPuapsdPTRTimeout", \ |
| 0, \ |
| 10000, \ |
| 5000, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Peer Traffic Response timer duration in ms") |
| |
| /* |
| * <ini> |
| * gTDLSPuapsdPTIWindow - This ini is used to configure peer traffic indication |
| * window. |
| * @Min: 1 |
| * @Max: 5 |
| * @Default: 2 |
| * |
| * This ini is used to configure buffering time in number of beacon intervals. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_EXTERNAL_CONTROL CFG_INI_BOOL( \ |
| "gTDLSExternalControl", \ |
| 1, \ |
| "Enable external TDLS control") |
| |
| /* |
| * <ini> |
| * gEnableTDLSWmmMode - Enables WMM support over TDLS link. |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 1 |
| * |
| * This ini is used to enable/disable WMM support over TDLS link. |
| * This is required to be set to 1 for any TDLS and uAPSD functionality. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_WMM_MODE_ENABLE CFG_INI_BOOL( \ |
| "gEnableTDLSWmmMode", \ |
| 1, \ |
| "Enables WMM support over TDLS link") |
| |
| /* |
| * <ini> |
| * gEnableTDLSScan - Allow scan and maintain TDLS link. |
| * @Min: 0 |
| * @Max: 1 |
| * @Default: 0 |
| * |
| * This ini is used to enable/disable TDLS scan. |
| * 0: If peer is not buffer STA capable and device is not sleep STA |
| * capable, then teardown TDLS link when scan is initiated. If peer |
| * is buffer STA and we can be sleep STA then TDLS link is maintained |
| * during scan. |
| * 1: Maintain TDLS link and allow scan even if peer is not buffer STA |
| * capable and device is not sleep STA capable. There will be loss of |
| * Rx pkts since peer would not know when device moves away from tdls |
| * channel. Tx on TDLS link would stop when device moves away from tdls |
| * channel. |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_SCAN_ENABLE CFG_INI_BOOL( \ |
| "gEnableTDLSScan", \ |
| 0, \ |
| "Allow scan and maintain TDLS link") |
| |
| /* |
| * <ini> |
| * gTDLSPeerKickoutThreshold - TDLS peer kick out threshold to firmware. |
| * @Min: 10 |
| * @Max: 5000 |
| * @Default: 96 |
| * |
| * This ini is used to configure TDLS peer kick out threshold to firmware. |
| * Firmware will use this value to determine, when to send TDLS |
| * peer kick out event to host. |
| * E.g. |
| * if peer kick out threshold is 10, then firmware will wait for 10 |
| * consecutive packet failures and then send TDLS kick out |
| * notification to host driver |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_PEER_KICKOUT_THRESHOLD CFG_INI_UINT( \ |
| "gTDLSPeerKickoutThreshold", \ |
| 10, \ |
| 5000, \ |
| 96, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "TDLS peer kick out threshold to firmware") |
| /* |
| * <ini> |
| * gTDLSDiscoveryWakeTimeout - TDLS discovery WAKE timeout in ms. |
| * @Min: 10 |
| * @Max: 5000 |
| * @Default: 96 |
| * |
| * DUT will wake until this timeout to receive TDLS discovery response |
| * from peer. If tdls_discovery_wake_timeout is 0x0, the DUT will |
| * choose autonomously what wake timeout value to use. |
| * |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_DISCOVERY_WAKE_TIMEOUT CFG_INI_UINT( \ |
| "gTDLSDiscoveryWakeTimeout", \ |
| 0, \ |
| 2000, \ |
| 200, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "TDLS peer kick out threshold to firmware") |
| |
| /* |
| * <ini> |
| * gTDLSEnableDeferTime - Timer to defer for enabling TDLS on P2P listen. |
| * @Min: 500 |
| * @Max: 6000 |
| * @Default: 2000 |
| * |
| * This ini is used to set the timer to defer for enabling TDLS on P2P |
| * listen (value in milliseconds). |
| * |
| * Related: gEnableTDLSSupport. |
| * |
| * Supported Feature: TDLS |
| * |
| * Usage: Internal/External |
| * |
| * </ini> |
| */ |
| #define CFG_TDLS_ENABLE_DEFER_TIMER CFG_INI_UINT( \ |
| "gTDLSEnableDeferTime", \ |
| 500, \ |
| 6000, \ |
| 2000, \ |
| CFG_VALUE_OR_DEFAULT, \ |
| "Timer to defer for enabling TDLS on P2P listen") |
| |
| #define CFG_TDLS_ALL \ |
| CFG(CFG_TDLS_QOS_WMM_UAPSD_MASK) \ |
| CFG(CFG_TDLS_BUF_STA_ENABLED) \ |
| CFG(CFG_TDLS_PUAPSD_INACT_TIME) \ |
| CFG(CFG_TDLS_RX_FRAME_THRESHOLD) \ |
| CFG(CFG_TDLS_OFF_CHANNEL_ENABLED) \ |
| CFG(CFG_TDLS_SUPPORT_ENABLE) \ |
| CFG(CFG_TDLS_IMPLICIT_TRIGGER) \ |
| CFG(CFG_TDLS_TX_STATS_PERIOD) \ |
| CFG(CFG_TDLS_TX_PACKET_THRESHOLD) \ |
| CFG(CFG_TDLS_MAX_DISCOVERY_ATTEMPT) \ |
| CFG(CFG_TDLS_MAX_PEER_COUNT) \ |
| CFG(CFG_TDLS_IDLE_TIMEOUT) \ |
| CFG(CFG_TDLS_IDLE_PACKET_THRESHOLD) \ |
| CFG(CFG_TDLS_RSSI_TRIGGER_THRESHOLD) \ |
| CFG(CFG_TDLS_RSSI_TEARDOWN_THRESHOLD) \ |
| CFG(CFG_TDLS_RSSI_DELTA) \ |
| CFG(CFG_TDLS_PREFERRED_OFF_CHANNEL_NUM) \ |
| CFG(CFG_TDLS_PREFERRED_OFF_CHANNEL_BW) \ |
| CFG(CFG_TDLS_PUAPSD_PEER_TRAFFIC_IND_WINDOW) \ |
| CFG(CFG_TDLS_PUAPSD_PEER_TRAFFIC_RSP_TIMEOUT) \ |
| CFG(CFG_TDLS_EXTERNAL_CONTROL) \ |
| CFG(CFG_TDLS_WMM_MODE_ENABLE) \ |
| CFG(CFG_TDLS_SCAN_ENABLE) \ |
| CFG(CFG_TDLS_PEER_KICKOUT_THRESHOLD) \ |
| CFG(CFG_TDLS_DISCOVERY_WAKE_TIMEOUT) \ |
| CFG(CFG_TDLS_ENABLE_DEFER_TIMER) |
| |
| #endif |