llvm/lib/Target/Sparc/EmitAssembly.cpp

//===-- EmitAssembly.cpp - Emit Sparc Specific .s File ---------------------==//
//
// This file implements all of the stuff neccesary to output a .s file from
// LLVM.  The code in this file assumes that the specified module has already
// been compiled into the internal data structures of the Module.
//
// The entry point of this file is the UltraSparc::emitAssembly method.
//
//===----------------------------------------------------------------------===//

#include "SparcInternals.h"
#include "llvm/Analysis/SlotCalculator.h"
#include "llvm/CodeGen/MachineInstr.h"
#include "llvm/BasicBlock.h"
#include "llvm/Method.h"
#include "llvm/Module.h"
#include "llvm/Support/StringExtras.h"

namespace {

class SparcAsmPrinter {
  ostream &Out;
  SlotCalculator Table;
  UltraSparc &Target;

  enum Sections {
    Unknown,
    Text,
    Data,
    ReadOnly,
  } CurSection;
public:
  inline SparcAsmPrinter(ostream &o, const Module *M, UltraSparc &t)
    : Out(o), Table(SlotCalculator(M, true)), Target(t), CurSection(Unknown) {
    emitModule(M);
  }

private :
  void emitModule(const Module *M);
  /*
  void processSymbolTable(const SymbolTable &ST);
  void processConstant(const ConstPoolVal *CPV);
  void processGlobal(const GlobalVariable *GV);
  */
  void emitMethod(const Method *M);
  //void processMethodArgument(const MethodArgument *MA);
  void emitBasicBlock(const BasicBlock *BB);
  void emitMachineInst(const MachineInstr *MI);

  
  //void writeOperand(const Value *Op, bool PrintType, bool PrintName = true);


  // enterSection - Use this method to enter a different section of the output
  // executable.  This is used to only output neccesary section transitions.
  //
  void enterSection(enum Sections S) {
    if (S == CurSection) return;        // Only switch section if neccesary
    CurSection = S;

    Out << ".section \".";
    switch (S) {
    default: assert(0 && "Bad section name!");
    case Text:     Out << "text"; break;
    case Data:     Out << "data"; break;
    case ReadOnly: Out << "rodata"; break;
    }
    Out << "\"\n";
  }

  // getID - Return a valid identifier for the specified value.  Base it on
  // the name of the identifier if possible, use a numbered value based on
  // prefix otherwise.  FPrefix is always prepended to the output identifier.
  //
  string getID(const Value *V, const char *Prefix, const char *FPrefix = 0) {
    string FP(FPrefix ? FPrefix : "");  // "Forced prefix"
    if (V->hasName()) {
      return FP + V->getName();  // TODO: Escape name if needed
    } else {
      assert(Table.getValSlot(V) != -1 && "Value not in value table!");
      return FP + string(Prefix) + itostr(Table.getValSlot(V));
    }
  }

  // getID Wrappers - Ensure consistent usage...
  string getID(const Method *M) { return getID(M, "anon_method$"); }
  string getID(const BasicBlock *BB) {
    return getID(BB, "LL", (".L$"+getID(BB->getParent())).c_str());
  }

  unsigned getOperandMask(unsigned Opcode) {
    switch (Opcode) {
    case SUBcc:   return 1 << 3;  // Remove CC argument
    case BA:      return 1 << 0;  // Remove Arg #0, which is always null
    default:      return 0;       // By default, don't hack operands...
    }
  }
};


void SparcAsmPrinter::emitMachineInst(const MachineInstr *MI) {
  unsigned Opcode = MI->getOpCode();

  if (TargetInstrDescriptors[Opcode].iclass & M_DUMMY_PHI_FLAG)
    return;  // IGNORE PHI NODES

  Out << "\t" << TargetInstrDescriptors[Opcode].opCodeString << "\t";

  unsigned Mask = getOperandMask(Opcode);

  bool NeedComma = false;
  for(unsigned OpNum = 0; OpNum < MI->getNumOperands(); ++OpNum) {
    if ((1 << OpNum) & Mask) continue;  // Ignore this operand?
    
    const MachineOperand &Op = MI->getOperand(OpNum);
    if (NeedComma) Out << ", ";    // Handle comma outputing
    NeedComma = true;

    switch (Op.getOperandType()) {
    case MachineOperand::MO_VirtualRegister:
    case MachineOperand::MO_CCRegister:
    case MachineOperand::MO_MachineRegister: {
      int RegNum = (int)Op.getAllocatedRegNum();
      
      // ****this code is temporary till NULL Values are fixed
      if (RegNum == 10000) {
        Out << "<NULL VALUE>";
        continue;
      }
      
      Out << "%" << Target.getRegInfo().getUnifiedRegName(RegNum);
      break;
    }
      
    case MachineOperand::MO_PCRelativeDisp: {
      const Value *Val = Op.getVRegValue();
      if (!Val) {
        Out << "\t<*NULL Value*>";
      } else if (Val->isBasicBlock()) {
        Out << getID(Val->castBasicBlockAsserting());
      } else {
        Out << "<unknown value=" << Val << ">";
      }
      break;
    }

    default:
      Out << Op;      // use dump field
      break;
    }
  }
  Out << endl;
}

void SparcAsmPrinter::emitBasicBlock(const BasicBlock *BB) {
  // Emit a label for the basic block
  Out << getID(BB) << ":\n";

  // Get the vector of machine instructions corresponding to this bb.
  const MachineCodeForBasicBlock &MIs = BB->getMachineInstrVec();
  MachineCodeForBasicBlock::const_iterator MII = MIs.begin(), MIE = MIs.end();

  // Loop over all of the instructions in the basic block...
  for (; MII != MIE; ++MII)
    emitMachineInst(*MII);
  Out << "\n";  // Seperate BB's with newlines
}

void SparcAsmPrinter::emitMethod(const Method *M) {
  if (M->isExternal()) return;

  // Make sure the slot table has information about this method...
  Table.incorporateMethod(M);

  string MethName = getID(M);
  Out << "!****** Outputing Method: " << MethName << " ******\n";
  enterSection(Text);
  Out << "\t.align 4\n\t.global\t" << MethName << "\n";
  Out << "\t.type\t" << MethName << ",#function\n";
  Out << MethName << ":\n";

  // Output code for all of the basic blocks in the method...
  for (Method::const_iterator I = M->begin(), E = M->end(); I != E; ++I)
    emitBasicBlock(*I);

  // Output a .size directive so the debugger knows the extents of the function
  Out << ".EndOf$" << MethName << ":\n\t.size " << MethName << ", .EndOf$"
      << MethName << "-" << MethName << endl;

  // Put some spaces between the methods
  Out << "\n\n";

  // Forget all about M.
  Table.purgeMethod();
}


void SparcAsmPrinter::emitModule(const Module *M) {
  // TODO: Look for a filename annotation on M to emit a .file directive
  for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I)
    emitMethod(*I);
}

}  // End anonymous namespace

//
// emitAssembly - Output assembly language code (a .s file) for the specified
// method. The specified method must have been compiled before this may be
// used.
//
void UltraSparc::emitAssembly(const Module *M, ostream &Out) {
  SparcAsmPrinter Print(Out, M, *this);
}