| //=== A15SDOptimizerPass.cpp - Optimize DPR and SPR register accesses on A15==// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // The Cortex-A15 processor employs a tracking scheme in its register renaming |
| // in order to process each instruction's micro-ops speculatively and |
| // out-of-order with appropriate forwarding. The ARM architecture allows VFP |
| // instructions to read and write 32-bit S-registers. Each S-register |
| // corresponds to one half (upper or lower) of an overlaid 64-bit D-register. |
| // |
| // There are several instruction patterns which can be used to provide this |
| // capability which can provide higher performance than other, potentially more |
| // direct patterns, specifically around when one micro-op reads a D-register |
| // operand that has recently been written as one or more S-register results. |
| // |
| // This file defines a pre-regalloc pass which looks for SPR producers which |
| // are going to be used by a DPR (or QPR) consumers and creates the more |
| // optimized access pattern. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "ARM.h" |
| #include "ARMBaseInstrInfo.h" |
| #include "ARMBaseRegisterInfo.h" |
| #include "ARMSubtarget.h" |
| #include "llvm/ADT/Statistic.h" |
| #include "llvm/CodeGen/MachineFunction.h" |
| #include "llvm/CodeGen/MachineFunctionPass.h" |
| #include "llvm/CodeGen/MachineInstr.h" |
| #include "llvm/CodeGen/MachineInstrBuilder.h" |
| #include "llvm/CodeGen/MachineRegisterInfo.h" |
| #include "llvm/CodeGen/TargetRegisterInfo.h" |
| #include "llvm/CodeGen/TargetSubtargetInfo.h" |
| #include "llvm/Support/Debug.h" |
| #include "llvm/Support/raw_ostream.h" |
| #include <map> |
| #include <set> |
| |
| using namespace llvm; |
| |
| #define DEBUG_TYPE "a15-sd-optimizer" |
| |
| namespace { |
| struct A15SDOptimizer : public MachineFunctionPass { |
| static char ID; |
| A15SDOptimizer() : MachineFunctionPass(ID) {} |
| |
| bool runOnMachineFunction(MachineFunction &Fn) override; |
| |
| StringRef getPassName() const override { return "ARM A15 S->D optimizer"; } |
| |
| private: |
| const ARMBaseInstrInfo *TII; |
| const TargetRegisterInfo *TRI; |
| MachineRegisterInfo *MRI; |
| |
| bool runOnInstruction(MachineInstr *MI); |
| |
| // |
| // Instruction builder helpers |
| // |
| unsigned createDupLane(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned Reg, unsigned Lane, |
| bool QPR = false); |
| |
| unsigned createExtractSubreg(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned DReg, |
| unsigned Lane, const TargetRegisterClass *TRC); |
| |
| unsigned createVExt(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned Ssub0, unsigned Ssub1); |
| |
| unsigned createRegSequence(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned Reg1, |
| unsigned Reg2); |
| |
| unsigned createInsertSubreg(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned DReg, |
| unsigned Lane, unsigned ToInsert); |
| |
| unsigned createImplicitDef(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL); |
| |
| // |
| // Various property checkers |
| // |
| bool usesRegClass(MachineOperand &MO, const TargetRegisterClass *TRC); |
| bool hasPartialWrite(MachineInstr *MI); |
| SmallVector<unsigned, 8> getReadDPRs(MachineInstr *MI); |
| unsigned getDPRLaneFromSPR(unsigned SReg); |
| |
| // |
| // Methods used for getting the definitions of partial registers |
| // |
| |
| MachineInstr *elideCopies(MachineInstr *MI); |
| void elideCopiesAndPHIs(MachineInstr *MI, |
| SmallVectorImpl<MachineInstr*> &Outs); |
| |
| // |
| // Pattern optimization methods |
| // |
| unsigned optimizeAllLanesPattern(MachineInstr *MI, unsigned Reg); |
| unsigned optimizeSDPattern(MachineInstr *MI); |
| unsigned getPrefSPRLane(unsigned SReg); |
| |
| // |
| // Sanitizing method - used to make sure if don't leave dead code around. |
| // |
| void eraseInstrWithNoUses(MachineInstr *MI); |
| |
| // |
| // A map used to track the changes done by this pass. |
| // |
| std::map<MachineInstr*, unsigned> Replacements; |
| std::set<MachineInstr *> DeadInstr; |
| }; |
| char A15SDOptimizer::ID = 0; |
| } // end anonymous namespace |
| |
| // Returns true if this is a use of a SPR register. |
| bool A15SDOptimizer::usesRegClass(MachineOperand &MO, |
| const TargetRegisterClass *TRC) { |
| if (!MO.isReg()) |
| return false; |
| unsigned Reg = MO.getReg(); |
| |
| if (TargetRegisterInfo::isVirtualRegister(Reg)) |
| return MRI->getRegClass(Reg)->hasSuperClassEq(TRC); |
| else |
| return TRC->contains(Reg); |
| } |
| |
| unsigned A15SDOptimizer::getDPRLaneFromSPR(unsigned SReg) { |
| unsigned DReg = TRI->getMatchingSuperReg(SReg, ARM::ssub_1, |
| &ARM::DPRRegClass); |
| if (DReg != ARM::NoRegister) return ARM::ssub_1; |
| return ARM::ssub_0; |
| } |
| |
| // Get the subreg type that is most likely to be coalesced |
| // for an SPR register that will be used in VDUP32d pseudo. |
| unsigned A15SDOptimizer::getPrefSPRLane(unsigned SReg) { |
| if (!TRI->isVirtualRegister(SReg)) |
| return getDPRLaneFromSPR(SReg); |
| |
| MachineInstr *MI = MRI->getVRegDef(SReg); |
| if (!MI) return ARM::ssub_0; |
| MachineOperand *MO = MI->findRegisterDefOperand(SReg); |
| |
| assert(MO->isReg() && "Non-register operand found!"); |
| if (!MO) return ARM::ssub_0; |
| |
| if (MI->isCopy() && usesRegClass(MI->getOperand(1), |
| &ARM::SPRRegClass)) { |
| SReg = MI->getOperand(1).getReg(); |
| } |
| |
| if (TargetRegisterInfo::isVirtualRegister(SReg)) { |
| if (MO->getSubReg() == ARM::ssub_1) return ARM::ssub_1; |
| return ARM::ssub_0; |
| } |
| return getDPRLaneFromSPR(SReg); |
| } |
| |
| // MI is known to be dead. Figure out what instructions |
| // are also made dead by this and mark them for removal. |
| void A15SDOptimizer::eraseInstrWithNoUses(MachineInstr *MI) { |
| SmallVector<MachineInstr *, 8> Front; |
| DeadInstr.insert(MI); |
| |
| LLVM_DEBUG(dbgs() << "Deleting base instruction " << *MI << "\n"); |
| Front.push_back(MI); |
| |
| while (Front.size() != 0) { |
| MI = Front.back(); |
| Front.pop_back(); |
| |
| // MI is already known to be dead. We need to see |
| // if other instructions can also be removed. |
| for (MachineOperand &MO : MI->operands()) { |
| if ((!MO.isReg()) || (!MO.isUse())) |
| continue; |
| unsigned Reg = MO.getReg(); |
| if (!TRI->isVirtualRegister(Reg)) |
| continue; |
| MachineOperand *Op = MI->findRegisterDefOperand(Reg); |
| |
| if (!Op) |
| continue; |
| |
| MachineInstr *Def = Op->getParent(); |
| |
| // We don't need to do anything if we have already marked |
| // this instruction as being dead. |
| if (DeadInstr.find(Def) != DeadInstr.end()) |
| continue; |
| |
| // Check if all the uses of this instruction are marked as |
| // dead. If so, we can also mark this instruction as being |
| // dead. |
| bool IsDead = true; |
| for (MachineOperand &MODef : Def->operands()) { |
| if ((!MODef.isReg()) || (!MODef.isDef())) |
| continue; |
| unsigned DefReg = MODef.getReg(); |
| if (!TRI->isVirtualRegister(DefReg)) { |
| IsDead = false; |
| break; |
| } |
| for (MachineInstr &Use : MRI->use_instructions(Reg)) { |
| // We don't care about self references. |
| if (&Use == Def) |
| continue; |
| if (DeadInstr.find(&Use) == DeadInstr.end()) { |
| IsDead = false; |
| break; |
| } |
| } |
| } |
| |
| if (!IsDead) continue; |
| |
| LLVM_DEBUG(dbgs() << "Deleting instruction " << *Def << "\n"); |
| DeadInstr.insert(Def); |
| } |
| } |
| } |
| |
| // Creates the more optimized patterns and generally does all the code |
| // transformations in this pass. |
| unsigned A15SDOptimizer::optimizeSDPattern(MachineInstr *MI) { |
| if (MI->isCopy()) { |
| return optimizeAllLanesPattern(MI, MI->getOperand(1).getReg()); |
| } |
| |
| if (MI->isInsertSubreg()) { |
| unsigned DPRReg = MI->getOperand(1).getReg(); |
| unsigned SPRReg = MI->getOperand(2).getReg(); |
| |
| if (TRI->isVirtualRegister(DPRReg) && TRI->isVirtualRegister(SPRReg)) { |
| MachineInstr *DPRMI = MRI->getVRegDef(MI->getOperand(1).getReg()); |
| MachineInstr *SPRMI = MRI->getVRegDef(MI->getOperand(2).getReg()); |
| |
| if (DPRMI && SPRMI) { |
| // See if the first operand of this insert_subreg is IMPLICIT_DEF |
| MachineInstr *ECDef = elideCopies(DPRMI); |
| if (ECDef && ECDef->isImplicitDef()) { |
| // Another corner case - if we're inserting something that is purely |
| // a subreg copy of a DPR, just use that DPR. |
| |
| MachineInstr *EC = elideCopies(SPRMI); |
| // Is it a subreg copy of ssub_0? |
| if (EC && EC->isCopy() && |
| EC->getOperand(1).getSubReg() == ARM::ssub_0) { |
| LLVM_DEBUG(dbgs() << "Found a subreg copy: " << *SPRMI); |
| |
| // Find the thing we're subreg copying out of - is it of the same |
| // regclass as DPRMI? (i.e. a DPR or QPR). |
| unsigned FullReg = SPRMI->getOperand(1).getReg(); |
| const TargetRegisterClass *TRC = |
| MRI->getRegClass(MI->getOperand(1).getReg()); |
| if (TRC->hasSuperClassEq(MRI->getRegClass(FullReg))) { |
| LLVM_DEBUG(dbgs() << "Subreg copy is compatible - returning "); |
| LLVM_DEBUG(dbgs() << printReg(FullReg) << "\n"); |
| eraseInstrWithNoUses(MI); |
| return FullReg; |
| } |
| } |
| |
| return optimizeAllLanesPattern(MI, MI->getOperand(2).getReg()); |
| } |
| } |
| } |
| return optimizeAllLanesPattern(MI, MI->getOperand(0).getReg()); |
| } |
| |
| if (MI->isRegSequence() && usesRegClass(MI->getOperand(1), |
| &ARM::SPRRegClass)) { |
| // See if all bar one of the operands are IMPLICIT_DEF and insert the |
| // optimizer pattern accordingly. |
| unsigned NumImplicit = 0, NumTotal = 0; |
| unsigned NonImplicitReg = ~0U; |
| |
| for (unsigned I = 1; I < MI->getNumExplicitOperands(); ++I) { |
| if (!MI->getOperand(I).isReg()) |
| continue; |
| ++NumTotal; |
| unsigned OpReg = MI->getOperand(I).getReg(); |
| |
| if (!TRI->isVirtualRegister(OpReg)) |
| break; |
| |
| MachineInstr *Def = MRI->getVRegDef(OpReg); |
| if (!Def) |
| break; |
| if (Def->isImplicitDef()) |
| ++NumImplicit; |
| else |
| NonImplicitReg = MI->getOperand(I).getReg(); |
| } |
| |
| if (NumImplicit == NumTotal - 1) |
| return optimizeAllLanesPattern(MI, NonImplicitReg); |
| else |
| return optimizeAllLanesPattern(MI, MI->getOperand(0).getReg()); |
| } |
| |
| llvm_unreachable("Unhandled update pattern!"); |
| } |
| |
| // Return true if this MachineInstr inserts a scalar (SPR) value into |
| // a D or Q register. |
| bool A15SDOptimizer::hasPartialWrite(MachineInstr *MI) { |
| // The only way we can do a partial register update is through a COPY, |
| // INSERT_SUBREG or REG_SEQUENCE. |
| if (MI->isCopy() && usesRegClass(MI->getOperand(1), &ARM::SPRRegClass)) |
| return true; |
| |
| if (MI->isInsertSubreg() && usesRegClass(MI->getOperand(2), |
| &ARM::SPRRegClass)) |
| return true; |
| |
| if (MI->isRegSequence() && usesRegClass(MI->getOperand(1), &ARM::SPRRegClass)) |
| return true; |
| |
| return false; |
| } |
| |
| // Looks through full copies to get the instruction that defines the input |
| // operand for MI. |
| MachineInstr *A15SDOptimizer::elideCopies(MachineInstr *MI) { |
| if (!MI->isFullCopy()) |
| return MI; |
| if (!TRI->isVirtualRegister(MI->getOperand(1).getReg())) |
| return nullptr; |
| MachineInstr *Def = MRI->getVRegDef(MI->getOperand(1).getReg()); |
| if (!Def) |
| return nullptr; |
| return elideCopies(Def); |
| } |
| |
| // Look through full copies and PHIs to get the set of non-copy MachineInstrs |
| // that can produce MI. |
| void A15SDOptimizer::elideCopiesAndPHIs(MachineInstr *MI, |
| SmallVectorImpl<MachineInstr*> &Outs) { |
| // Looking through PHIs may create loops so we need to track what |
| // instructions we have visited before. |
| std::set<MachineInstr *> Reached; |
| SmallVector<MachineInstr *, 8> Front; |
| Front.push_back(MI); |
| while (Front.size() != 0) { |
| MI = Front.back(); |
| Front.pop_back(); |
| |
| // If we have already explored this MachineInstr, ignore it. |
| if (Reached.find(MI) != Reached.end()) |
| continue; |
| Reached.insert(MI); |
| if (MI->isPHI()) { |
| for (unsigned I = 1, E = MI->getNumOperands(); I != E; I += 2) { |
| unsigned Reg = MI->getOperand(I).getReg(); |
| if (!TRI->isVirtualRegister(Reg)) { |
| continue; |
| } |
| MachineInstr *NewMI = MRI->getVRegDef(Reg); |
| if (!NewMI) |
| continue; |
| Front.push_back(NewMI); |
| } |
| } else if (MI->isFullCopy()) { |
| if (!TRI->isVirtualRegister(MI->getOperand(1).getReg())) |
| continue; |
| MachineInstr *NewMI = MRI->getVRegDef(MI->getOperand(1).getReg()); |
| if (!NewMI) |
| continue; |
| Front.push_back(NewMI); |
| } else { |
| LLVM_DEBUG(dbgs() << "Found partial copy" << *MI << "\n"); |
| Outs.push_back(MI); |
| } |
| } |
| } |
| |
| // Return the DPR virtual registers that are read by this machine instruction |
| // (if any). |
| SmallVector<unsigned, 8> A15SDOptimizer::getReadDPRs(MachineInstr *MI) { |
| if (MI->isCopyLike() || MI->isInsertSubreg() || MI->isRegSequence() || |
| MI->isKill()) |
| return SmallVector<unsigned, 8>(); |
| |
| SmallVector<unsigned, 8> Defs; |
| for (MachineOperand &MO : MI->operands()) { |
| if (!MO.isReg() || !MO.isUse()) |
| continue; |
| if (!usesRegClass(MO, &ARM::DPRRegClass) && |
| !usesRegClass(MO, &ARM::QPRRegClass) && |
| !usesRegClass(MO, &ARM::DPairRegClass)) // Treat DPair as QPR |
| continue; |
| |
| Defs.push_back(MO.getReg()); |
| } |
| return Defs; |
| } |
| |
| // Creates a DPR register from an SPR one by using a VDUP. |
| unsigned A15SDOptimizer::createDupLane(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned Reg, |
| unsigned Lane, bool QPR) { |
| unsigned Out = MRI->createVirtualRegister(QPR ? &ARM::QPRRegClass : |
| &ARM::DPRRegClass); |
| BuildMI(MBB, InsertBefore, DL, |
| TII->get(QPR ? ARM::VDUPLN32q : ARM::VDUPLN32d), Out) |
| .addReg(Reg) |
| .addImm(Lane) |
| .add(predOps(ARMCC::AL)); |
| |
| return Out; |
| } |
| |
| // Creates a SPR register from a DPR by copying the value in lane 0. |
| unsigned A15SDOptimizer::createExtractSubreg( |
| MachineBasicBlock &MBB, MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned DReg, unsigned Lane, |
| const TargetRegisterClass *TRC) { |
| unsigned Out = MRI->createVirtualRegister(TRC); |
| BuildMI(MBB, |
| InsertBefore, |
| DL, |
| TII->get(TargetOpcode::COPY), Out) |
| .addReg(DReg, 0, Lane); |
| |
| return Out; |
| } |
| |
| // Takes two SPR registers and creates a DPR by using a REG_SEQUENCE. |
| unsigned A15SDOptimizer::createRegSequence( |
| MachineBasicBlock &MBB, MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned Reg1, unsigned Reg2) { |
| unsigned Out = MRI->createVirtualRegister(&ARM::QPRRegClass); |
| BuildMI(MBB, |
| InsertBefore, |
| DL, |
| TII->get(TargetOpcode::REG_SEQUENCE), Out) |
| .addReg(Reg1) |
| .addImm(ARM::dsub_0) |
| .addReg(Reg2) |
| .addImm(ARM::dsub_1); |
| return Out; |
| } |
| |
| // Takes two DPR registers that have previously been VDUPed (Ssub0 and Ssub1) |
| // and merges them into one DPR register. |
| unsigned A15SDOptimizer::createVExt(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned Ssub0, |
| unsigned Ssub1) { |
| unsigned Out = MRI->createVirtualRegister(&ARM::DPRRegClass); |
| BuildMI(MBB, InsertBefore, DL, TII->get(ARM::VEXTd32), Out) |
| .addReg(Ssub0) |
| .addReg(Ssub1) |
| .addImm(1) |
| .add(predOps(ARMCC::AL)); |
| return Out; |
| } |
| |
| unsigned A15SDOptimizer::createInsertSubreg( |
| MachineBasicBlock &MBB, MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL, unsigned DReg, unsigned Lane, unsigned ToInsert) { |
| unsigned Out = MRI->createVirtualRegister(&ARM::DPR_VFP2RegClass); |
| BuildMI(MBB, |
| InsertBefore, |
| DL, |
| TII->get(TargetOpcode::INSERT_SUBREG), Out) |
| .addReg(DReg) |
| .addReg(ToInsert) |
| .addImm(Lane); |
| |
| return Out; |
| } |
| |
| unsigned |
| A15SDOptimizer::createImplicitDef(MachineBasicBlock &MBB, |
| MachineBasicBlock::iterator InsertBefore, |
| const DebugLoc &DL) { |
| unsigned Out = MRI->createVirtualRegister(&ARM::DPRRegClass); |
| BuildMI(MBB, |
| InsertBefore, |
| DL, |
| TII->get(TargetOpcode::IMPLICIT_DEF), Out); |
| return Out; |
| } |
| |
| // This function inserts instructions in order to optimize interactions between |
| // SPR registers and DPR/QPR registers. It does so by performing VDUPs on all |
| // lanes, and the using VEXT instructions to recompose the result. |
| unsigned |
| A15SDOptimizer::optimizeAllLanesPattern(MachineInstr *MI, unsigned Reg) { |
| MachineBasicBlock::iterator InsertPt(MI); |
| DebugLoc DL = MI->getDebugLoc(); |
| MachineBasicBlock &MBB = *MI->getParent(); |
| InsertPt++; |
| unsigned Out; |
| |
| // DPair has the same length as QPR and also has two DPRs as subreg. |
| // Treat DPair as QPR. |
| if (MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::QPRRegClass) || |
| MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::DPairRegClass)) { |
| unsigned DSub0 = createExtractSubreg(MBB, InsertPt, DL, Reg, |
| ARM::dsub_0, &ARM::DPRRegClass); |
| unsigned DSub1 = createExtractSubreg(MBB, InsertPt, DL, Reg, |
| ARM::dsub_1, &ARM::DPRRegClass); |
| |
| unsigned Out1 = createDupLane(MBB, InsertPt, DL, DSub0, 0); |
| unsigned Out2 = createDupLane(MBB, InsertPt, DL, DSub0, 1); |
| Out = createVExt(MBB, InsertPt, DL, Out1, Out2); |
| |
| unsigned Out3 = createDupLane(MBB, InsertPt, DL, DSub1, 0); |
| unsigned Out4 = createDupLane(MBB, InsertPt, DL, DSub1, 1); |
| Out2 = createVExt(MBB, InsertPt, DL, Out3, Out4); |
| |
| Out = createRegSequence(MBB, InsertPt, DL, Out, Out2); |
| |
| } else if (MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::DPRRegClass)) { |
| unsigned Out1 = createDupLane(MBB, InsertPt, DL, Reg, 0); |
| unsigned Out2 = createDupLane(MBB, InsertPt, DL, Reg, 1); |
| Out = createVExt(MBB, InsertPt, DL, Out1, Out2); |
| |
| } else { |
| assert(MRI->getRegClass(Reg)->hasSuperClassEq(&ARM::SPRRegClass) && |
| "Found unexpected regclass!"); |
| |
| unsigned PrefLane = getPrefSPRLane(Reg); |
| unsigned Lane; |
| switch (PrefLane) { |
| case ARM::ssub_0: Lane = 0; break; |
| case ARM::ssub_1: Lane = 1; break; |
| default: llvm_unreachable("Unknown preferred lane!"); |
| } |
| |
| // Treat DPair as QPR |
| bool UsesQPR = usesRegClass(MI->getOperand(0), &ARM::QPRRegClass) || |
| usesRegClass(MI->getOperand(0), &ARM::DPairRegClass); |
| |
| Out = createImplicitDef(MBB, InsertPt, DL); |
| Out = createInsertSubreg(MBB, InsertPt, DL, Out, PrefLane, Reg); |
| Out = createDupLane(MBB, InsertPt, DL, Out, Lane, UsesQPR); |
| eraseInstrWithNoUses(MI); |
| } |
| return Out; |
| } |
| |
| bool A15SDOptimizer::runOnInstruction(MachineInstr *MI) { |
| // We look for instructions that write S registers that are then read as |
| // D/Q registers. These can only be caused by COPY, INSERT_SUBREG and |
| // REG_SEQUENCE pseudos that insert an SPR value into a DPR register or |
| // merge two SPR values to form a DPR register. In order avoid false |
| // positives we make sure that there is an SPR producer so we look past |
| // COPY and PHI nodes to find it. |
| // |
| // The best code pattern for when an SPR producer is going to be used by a |
| // DPR or QPR consumer depends on whether the other lanes of the |
| // corresponding DPR/QPR are currently defined. |
| // |
| // We can handle these efficiently, depending on the type of |
| // pseudo-instruction that is producing the pattern |
| // |
| // * COPY: * VDUP all lanes and merge the results together |
| // using VEXTs. |
| // |
| // * INSERT_SUBREG: * If the SPR value was originally in another DPR/QPR |
| // lane, and the other lane(s) of the DPR/QPR register |
| // that we are inserting in are undefined, use the |
| // original DPR/QPR value. |
| // * Otherwise, fall back on the same stategy as COPY. |
| // |
| // * REG_SEQUENCE: * If all except one of the input operands are |
| // IMPLICIT_DEFs, insert the VDUP pattern for just the |
| // defined input operand |
| // * Otherwise, fall back on the same stategy as COPY. |
| // |
| |
| // First, get all the reads of D-registers done by this instruction. |
| SmallVector<unsigned, 8> Defs = getReadDPRs(MI); |
| bool Modified = false; |
| |
| for (SmallVectorImpl<unsigned>::iterator I = Defs.begin(), E = Defs.end(); |
| I != E; ++I) { |
| // Follow the def-use chain for this DPR through COPYs, and also through |
| // PHIs (which are essentially multi-way COPYs). It is because of PHIs that |
| // we can end up with multiple defs of this DPR. |
| |
| SmallVector<MachineInstr *, 8> DefSrcs; |
| if (!TRI->isVirtualRegister(*I)) |
| continue; |
| MachineInstr *Def = MRI->getVRegDef(*I); |
| if (!Def) |
| continue; |
| |
| elideCopiesAndPHIs(Def, DefSrcs); |
| |
| for (MachineInstr *MI : DefSrcs) { |
| // If we've already analyzed and replaced this operand, don't do |
| // anything. |
| if (Replacements.find(MI) != Replacements.end()) |
| continue; |
| |
| // Now, work out if the instruction causes a SPR->DPR dependency. |
| if (!hasPartialWrite(MI)) |
| continue; |
| |
| // Collect all the uses of this MI's DPR def for updating later. |
| SmallVector<MachineOperand*, 8> Uses; |
| unsigned DPRDefReg = MI->getOperand(0).getReg(); |
| for (MachineRegisterInfo::use_iterator I = MRI->use_begin(DPRDefReg), |
| E = MRI->use_end(); I != E; ++I) |
| Uses.push_back(&*I); |
| |
| // We can optimize this. |
| unsigned NewReg = optimizeSDPattern(MI); |
| |
| if (NewReg != 0) { |
| Modified = true; |
| for (SmallVectorImpl<MachineOperand *>::const_iterator I = Uses.begin(), |
| E = Uses.end(); I != E; ++I) { |
| // Make sure to constrain the register class of the new register to |
| // match what we're replacing. Otherwise we can optimize a DPR_VFP2 |
| // reference into a plain DPR, and that will end poorly. NewReg is |
| // always virtual here, so there will always be a matching subclass |
| // to find. |
| MRI->constrainRegClass(NewReg, MRI->getRegClass((*I)->getReg())); |
| |
| LLVM_DEBUG(dbgs() << "Replacing operand " << **I << " with " |
| << printReg(NewReg) << "\n"); |
| (*I)->substVirtReg(NewReg, 0, *TRI); |
| } |
| } |
| Replacements[MI] = NewReg; |
| } |
| } |
| return Modified; |
| } |
| |
| bool A15SDOptimizer::runOnMachineFunction(MachineFunction &Fn) { |
| if (skipFunction(Fn.getFunction())) |
| return false; |
| |
| const ARMSubtarget &STI = Fn.getSubtarget<ARMSubtarget>(); |
| // Since the A15SDOptimizer pass can insert VDUP instructions, it can only be |
| // enabled when NEON is available. |
| if (!(STI.useSplatVFPToNeon() && STI.hasNEON())) |
| return false; |
| |
| TII = STI.getInstrInfo(); |
| TRI = STI.getRegisterInfo(); |
| MRI = &Fn.getRegInfo(); |
| bool Modified = false; |
| |
| LLVM_DEBUG(dbgs() << "Running on function " << Fn.getName() << "\n"); |
| |
| DeadInstr.clear(); |
| Replacements.clear(); |
| |
| for (MachineBasicBlock &MBB : Fn) { |
| for (MachineInstr &MI : MBB) { |
| Modified |= runOnInstruction(&MI); |
| } |
| } |
| |
| for (MachineInstr *MI : DeadInstr) { |
| MI->eraseFromParent(); |
| } |
| |
| return Modified; |
| } |
| |
| FunctionPass *llvm::createA15SDOptimizerPass() { |
| return new A15SDOptimizer(); |
| } |