|  | # See www/CMake.html for instructions on how to build libcxx with CMake. | 
|  |  | 
|  | #=============================================================================== | 
|  | # Setup Project | 
|  | #=============================================================================== | 
|  |  | 
|  | project(libcxx CXX C) | 
|  | cmake_minimum_required(VERSION 2.8) | 
|  |  | 
|  | if(POLICY CMP0042) | 
|  | cmake_policy(SET CMP0042 NEW) # Set MACOSX_RPATH=YES by default | 
|  | endif() | 
|  |  | 
|  | set(PACKAGE_NAME libcxx) | 
|  | set(PACKAGE_VERSION trunk-svn) | 
|  | set(PACKAGE_STRING "${PACKAGE_NAME} ${PACKAGE_VERSION}") | 
|  | set(PACKAGE_BUGREPORT "llvmbugs@cs.uiuc.edu") | 
|  |  | 
|  | # Add path for custom modules | 
|  | set(CMAKE_MODULE_PATH | 
|  | "${CMAKE_CURRENT_SOURCE_DIR}/cmake" | 
|  | "${CMAKE_CURRENT_SOURCE_DIR}/cmake/Modules" | 
|  | ${CMAKE_MODULE_PATH} | 
|  | ) | 
|  |  | 
|  | # Require out of source build. | 
|  | include(MacroEnsureOutOfSourceBuild) | 
|  | MACRO_ENSURE_OUT_OF_SOURCE_BUILD( | 
|  | "${PROJECT_NAME} requires an out of source build. Please create a separate | 
|  | build directory and run 'cmake /path/to/${PROJECT_NAME} [options]' there." | 
|  | ) | 
|  |  | 
|  | if(CMAKE_SOURCE_DIR STREQUAL CMAKE_CURRENT_SOURCE_DIR) | 
|  | set(LIBCXX_LIBDIR_SUFFIX "" CACHE STRING | 
|  | "Define suffix of library directory name (32/64)") | 
|  |  | 
|  | set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib${LIBCXX_LIBDIR_SUFFIX}) | 
|  | set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib${LIBCXX_LIBDIR_SUFFIX}) | 
|  |  | 
|  | set(LIBCXX_BUILT_STANDALONE 1) | 
|  | else() | 
|  | set(LIBCXX_LIBDIR_SUFFIX ${LLVM_LIBDIR_SUFFIX}) | 
|  | endif() | 
|  |  | 
|  | #=============================================================================== | 
|  | # Setup CMake Options | 
|  | #=============================================================================== | 
|  |  | 
|  | # Define options. | 
|  | option(LIBCXX_ENABLE_EXCEPTIONS "Use exceptions." ON) | 
|  | option(LIBCXX_ENABLE_RTTI "Use run time type information." ON) | 
|  | option(LIBCXX_ENABLE_ASSERTIONS "Enable assertions independent of build mode." ON) | 
|  | option(LIBCXX_ENABLE_PEDANTIC "Compile with pedantic enabled." ON) | 
|  | option(LIBCXX_ENABLE_WERROR "Fail and stop if a warning is triggered." OFF) | 
|  | option(LIBCXX_ENABLE_CXX1Y "Enable -std=c++1y and use of c++1y language features if the compiler supports it." OFF) | 
|  | option(LIBCXX_ENABLE_SHARED "Build libc++ as a shared library." ON) | 
|  | option(LIBCXX_ENABLE_GLOBAL_FILESYSTEM_NAMESPACE "Build libc++ with support for the global filesystem namespace." ON) | 
|  | option(LIBCXX_ENABLE_STDIN "Build libc++ with support for stdin/std::cin." ON) | 
|  | option(LIBCXX_ENABLE_STDOUT "Build libc++ with support for stdout/std::cout." ON) | 
|  | option(LIBCXX_ENABLE_THREADS "Build libc++ with support for threads." ON) | 
|  | option(LIBCXX_BUILD_32_BITS "Build 32 bit libc++" OFF) | 
|  | option(LIBCXX_ENABLE_MONOTONIC_CLOCK | 
|  | "Build libc++ with support for a monotonic clock. | 
|  | This option may only be used when LIBCXX_ENABLE_THREADS=OFF." ON) | 
|  | option(LIBCXX_INSTALL_HEADERS "Install the libc++ headers." ON) | 
|  | option(LIBCXX_INSTALL_SUPPORT_HEADERS "Install libc++ support headers." ON) | 
|  | option(LIBCXX_GENERATE_COVERAGE "Enable generating code coverage." OFF) | 
|  | set(LIBCXX_COVERAGE_LIBRARY "" CACHE STRING | 
|  | "The Profile-rt library used to build with code coverage") | 
|  | option(LIBCXX_ENABLE_STATIC_ABI_LIBRARY "Statically link the ABI library" OFF) | 
|  | set(LIBCXX_SYSROOT "" CACHE STRING "Use alternate sysroot.") | 
|  | set(LIBCXX_GCC_TOOLCHAIN "" CACHE STRING "Use alternate GCC toolchain.") | 
|  | if (LIBCXX_BUILT_STANDALONE) | 
|  | set(LLVM_USE_SANITIZER "" CACHE STRING | 
|  | "Define the sanitizer used to build the library and tests") | 
|  | endif() | 
|  |  | 
|  | if (LIBCXX_ENABLE_STATIC_ABI_LIBRARY) | 
|  | if (APPLE) | 
|  | message(FATAL_ERROR "LIBCXX_ENABLE_STATIC_ABI_LIBRARY is not supported on OS X") | 
|  | else() | 
|  | message(WARNING "LIBCXX_ENABLE_STATIC_ABI_LIBRARY is an experimental option") | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | set(CXXABIS none libcxxabi libcxxrt libstdc++ libsupc++) | 
|  | if (NOT LIBCXX_CXX_ABI) | 
|  | if (NOT DEFINED LIBCXX_BUILT_STANDALONE AND | 
|  | IS_DIRECTORY "${CMAKE_SOURCE_DIR}/projects/libcxxabi") | 
|  | set(LIBCXX_CXX_ABI_LIBNAME "libcxxabi") | 
|  | set(LIBCXX_CXX_ABI_INCLUDE_PATHS "${CMAKE_SOURCE_DIR}/projects/libcxxabi/include") | 
|  | set(LIBCXX_CXX_ABI_INTREE 1) | 
|  | else () | 
|  | set(LIBCXX_CXX_ABI_LIBNAME "none") | 
|  | endif () | 
|  | else () | 
|  | set(LIBCXX_CXX_ABI_LIBNAME "${LIBCXX_CXX_ABI}") | 
|  | endif () | 
|  | set(LIBCXX_CXX_ABI "${LIBCXX_CXX_ABI}" CACHE STRING | 
|  | "Specify C++ ABI library to use." FORCE) | 
|  | set_property(CACHE LIBCXX_CXX_ABI PROPERTY STRINGS ;${CXXABIS}) | 
|  |  | 
|  | # Build libc++abi with libunwind. We need this option to determine whether to | 
|  | # link with libunwind or libgcc_s while running the test cases. | 
|  | option(LIBCXXABI_USE_LLVM_UNWINDER "Build and use the LLVM unwinder." OFF) | 
|  |  | 
|  | # TODO(ericwf): Remove these options by March/25/2015. | 
|  | # These CMake options have been removed in favor of a generic option | 
|  | # "LIBCXX_CXX_ABI_INCLUDE_PATHS". Issue an explicit error message explaining | 
|  | # the change for anybody that still uses them. | 
|  | if (DEFINED LIBCXX_LIBCXXABI_INCLUDE_PATHS) | 
|  | message(FATAL_ERROR | 
|  | "The option \"LIBCXX_LIBCXXABI_INCLUDE_PATHS\" has been removed. " | 
|  | "Use \"LIBCXX_CXX_ABI_INCLUDE_PATHS\" instead " | 
|  | "and clean your build directory.") | 
|  | elseif(DEFINED LIBCXX_LIBSUPCXX_INCLUDE_PATHS) | 
|  | message(FATAL_ERROR | 
|  | "The option \"LIBCXX_LIBSUPCXX_INCLUDE_PATHS\" has been removed. " | 
|  | "Use \"LIBCXX_CXX_ABI_INCLUDE_PATHS\" instead " | 
|  | "and clean your build directory.") | 
|  | elseif(DEFINED LIBCXX_LIBCXXRT_INCLUDE_PATHS) | 
|  | message(FATAL_ERROR | 
|  | "The option \"LIBCXX_LIBCXXRT_INCLUDE_PATHS\" has been removed. " | 
|  | "Use \"LIBCXX_CXX_ABI_INCLUDE_PATHS\" instead " | 
|  | "and clean your build directory.") | 
|  | endif() | 
|  |  | 
|  | #=============================================================================== | 
|  | # Configure System | 
|  | #=============================================================================== | 
|  |  | 
|  | set(LIBCXX_COMPILER    ${CMAKE_CXX_COMPILER}) | 
|  | set(LIBCXX_SOURCE_DIR  ${CMAKE_CURRENT_SOURCE_DIR}) | 
|  | set(LIBCXX_BINARY_DIR  ${CMAKE_CURRENT_BINARY_DIR}) | 
|  | set(LIBCXX_LIBRARY_DIR ${CMAKE_BINARY_DIR}/lib${LIBCXX_LIBDIR_SUFFIX}) | 
|  |  | 
|  | # Declare libc++ configuration variables. | 
|  | # They are intended for use as follows: | 
|  | # LIBCXX_CXX_FLAGS: General flags for both the compiler and linker. | 
|  | # LIBCXX_COMPILE_FLAGS: Compile only flags. | 
|  | # LIBCXX_LINK_FLAGS: Linker only flags. | 
|  | set(LIBCXX_CXX_FLAGS "") | 
|  | set(LIBCXX_COMPILE_FLAGS "") | 
|  | set(LIBCXX_LINK_FLAGS "") | 
|  |  | 
|  | # Configure compiler. | 
|  | include(config-ix) | 
|  | # Configure ABI library | 
|  | include(HandleLibCXXABI) | 
|  | # Configure coverage options. | 
|  | if (LIBCXX_GENERATE_COVERAGE) | 
|  | include(CodeCoverage) | 
|  | set(CMAKE_BUILD_TYPE "COVERAGE" CACHE STRING "" FORCE) | 
|  | endif() | 
|  |  | 
|  | #=============================================================================== | 
|  | # Setup Compiler Flags | 
|  | #=============================================================================== | 
|  |  | 
|  | # Get required flags. | 
|  | # On all systems the system c++ standard library headers need to be excluded. | 
|  | if (MSVC) | 
|  | # MSVC only has -X, which disables all default includes; including the crt. | 
|  | # Thus, we do nothing and hope we don't accidentally include any of the C++ | 
|  | # headers. | 
|  | else() | 
|  | if (LIBCXX_HAS_NOSTDINCXX_FLAG) | 
|  | list(APPEND LIBCXX_COMPILE_FLAGS -nostdinc++) | 
|  | string(REPLACE "-stdlib=libc++" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") | 
|  | string(REPLACE "-stdlib=libstdc++" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") | 
|  | endif() | 
|  | # If c++1y has been enabled then attempt to use it. Fail if it is no supported | 
|  | # by the compiler. Otherwise choose c++11 and ensure the compiler supports it. | 
|  | if (LIBCXX_ENABLE_CXX1Y) | 
|  | if (LIBCXX_HAS_STDCXX1Y_FLAG) | 
|  | set(LIBCXX_STD_VERSION c++1y) | 
|  | else() | 
|  | message(FATAL_ERROR "c++1y was enabled but the compiler does not support it.") | 
|  | endif() | 
|  | else() | 
|  | if (LIBCXX_HAS_STDCXX11_FLAG) | 
|  | set(LIBCXX_STD_VERSION c++11) | 
|  | else() | 
|  | message(FATAL_ERROR "c++11 is required by libc++ but is not supported by the compiler") | 
|  | endif() | 
|  | endif() | 
|  | # LIBCXX_STD_VERSION should always be set at this point. | 
|  | list(APPEND LIBCXX_CXX_FLAGS "-std=${LIBCXX_STD_VERSION}") | 
|  | endif() | 
|  |  | 
|  | macro(append_if list condition var) | 
|  | if (${condition}) | 
|  | list(APPEND ${list} ${var}) | 
|  | endif() | 
|  | endmacro() | 
|  |  | 
|  | # Get warning flags | 
|  | if (NOT MSVC) | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_WALL_FLAG -Wall) | 
|  | list(APPEND LIBCXX_COMPILE_FLAGS -Werror=return-type) | 
|  | endif() | 
|  |  | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_W_FLAG -W) | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_WNO_UNUSED_PARAMETER_FLAG -Wno-unused-parameter) | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_WWRITE_STRINGS_FLAG -Wwrite-strings) | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_WNO_LONG_LONG_FLAG -Wno-long-long) | 
|  | if (LIBCXX_ENABLE_WERROR) | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_WERROR_FLAG -Werror) | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_WX_FLAG -WX) | 
|  | else() | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_WNO_ERROR_FLAG -Wno-error) | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_NO_WX_FLAG -WX-) | 
|  | endif() | 
|  | if (LIBCXX_ENABLE_PEDANTIC) | 
|  | append_if(LIBCXX_COMPILE_FLAGS LIBCXX_HAS_PEDANTIC_FLAG -pedantic) | 
|  | endif() | 
|  |  | 
|  | # Get feature flags. | 
|  | # Exceptions | 
|  | if (LIBCXX_ENABLE_EXCEPTIONS) | 
|  | # Catches C++ exceptions only and tells the compiler to assume that extern C | 
|  | # functions never throw a C++ exception. | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_HAS_EHSC_FLAG -EHsc) | 
|  | else() | 
|  | list(APPEND LIBCXX_CXX_FLAGS -D_LIBCPP_NO_EXCEPTIONS) | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_HAS_NO_EHS_FLAG -EHs-) | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_HAS_NO_EHA_FLAG -EHa-) | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_HAS_FNO_EXCEPTIONS_FLAG -fno-exceptions) | 
|  | endif() | 
|  | # RTTI | 
|  | if (NOT LIBCXX_ENABLE_RTTI) | 
|  | list(APPEND LIBCXX_CXX_FLAGS -D_LIBCPP_NO_RTTI) | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_HAS_NO_GR_FLAG -GR-) | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_HAS_FNO_RTTI_FLAG -fno-rtti) | 
|  | endif() | 
|  | # Assert | 
|  | string(TOUPPER "${CMAKE_BUILD_TYPE}" uppercase_CMAKE_BUILD_TYPE) | 
|  | if (LIBCXX_ENABLE_ASSERTIONS) | 
|  | # MSVC doesn't like _DEBUG on release builds. See PR 4379. | 
|  | if (NOT MSVC) | 
|  | list(APPEND LIBCXX_COMPILE_FLAGS -D_DEBUG) | 
|  | endif() | 
|  | # On Release builds cmake automatically defines NDEBUG, so we | 
|  | # explicitly undefine it: | 
|  | if (uppercase_CMAKE_BUILD_TYPE STREQUAL "RELEASE") | 
|  | list(APPEND LIBCXX_COMPILE_FLAGS -UNDEBUG) | 
|  | endif() | 
|  | else() | 
|  | if (NOT uppercase_CMAKE_BUILD_TYPE STREQUAL "RELEASE") | 
|  | list(APPEND LIBCXX_COMPILE_FLAGS -DNDEBUG) | 
|  | endif() | 
|  | endif() | 
|  | # Static library | 
|  | if (NOT LIBCXX_ENABLE_SHARED) | 
|  | list(APPEND LIBCXX_COMPILE_FLAGS -D_LIBCPP_BUILD_STATIC) | 
|  | endif() | 
|  |  | 
|  | if (CMAKE_SIZEOF_VOID_P EQUAL 8 AND NOT WIN32) | 
|  | if (LIBCXX_BUILD_32_BITS) | 
|  | message(STATUS "Building 32 bits executables and libraries.") | 
|  | list(APPEND LIBCXX_CXX_FLAGS "-m32") | 
|  | endif() | 
|  | elseif(LIBCXX_BUILD_32_BITS) | 
|  | message(FATAL_ERROR "LIBCXX_BUILD_32_BITS=ON is not supported on this platform.") | 
|  | endif() | 
|  | # This is the _ONLY_ place where add_definitions is called. | 
|  | if (MSVC) | 
|  | add_definitions(-D_CRT_SECURE_NO_WARNINGS) | 
|  | endif() | 
|  |  | 
|  | # LIBCXX_ENABLE_GLOBAL_FILESYSTEM_NAMESPACE configuration | 
|  | if (NOT LIBCXX_ENABLE_GLOBAL_FILESYSTEM_NAMESPACE) | 
|  | add_definitions(-D_LIBCPP_HAS_NO_GLOBAL_FILESYSTEM_NAMESPACE) | 
|  | endif() | 
|  |  | 
|  | # LIBCXX_ENABLE_STDIN configuration | 
|  | if (NOT LIBCXX_ENABLE_STDIN) | 
|  | add_definitions(-D_LIBCPP_HAS_NO_STDIN) | 
|  | endif() | 
|  |  | 
|  | # LIBCXX_ENABLE_STDOUT configuration | 
|  | if (NOT LIBCXX_ENABLE_STDOUT) | 
|  | add_definitions(-D_LIBCPP_HAS_NO_STDOUT) | 
|  | endif() | 
|  |  | 
|  | # LIBCXX_ENABLE_THREADS configuration | 
|  | if (NOT LIBCXX_ENABLE_THREADS) | 
|  | add_definitions(-D_LIBCPP_HAS_NO_THREADS) | 
|  | if (NOT LIBCXX_ENABLE_MONOTONIC_CLOCK) | 
|  | add_definitions(-D_LIBCPP_HAS_NO_MONOTONIC_CLOCK) | 
|  | endif() | 
|  | # Ensure LIBCXX_ENABLE_MONOTONIC_CLOCK is set to ON. | 
|  | elseif(NOT LIBCXX_ENABLE_MONOTONIC_CLOCK) | 
|  | message(FATAL_ERROR "LIBCXX_ENABLE_MONOTONIC_CLOCK can only be set to OFF" | 
|  | " when LIBCXX_ENABLE_THREADS is also set to OFF.") | 
|  | endif() | 
|  |  | 
|  | # Configure for sanitizers. If LIBCXX_BUILT_STANDALONE then we have to do | 
|  | # the flag translation ourselves. Othewise LLVM's CMakeList.txt will handle it. | 
|  | if (LIBCXX_BUILT_STANDALONE) | 
|  | # NOTE: LLVM_USE_SANITIZER checks for a UNIX like system instead of MSVC. | 
|  | # But we don't have LLVM_ON_UNIX so checking for MSVC is the best we can do. | 
|  | if (LLVM_USE_SANITIZER AND NOT MSVC) | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_HAS_FNO_OMIT_FRAME_POINTER_FLAG | 
|  | "-fno-omit-frame-pointer") | 
|  | if (NOT uppercase_CMAKE_BUILD_TYPE STREQUAL "DEBUG" AND | 
|  | NOT uppercase_CMAKE_BUILD_TYPE STREQUAL "RELWITHDEBINFO") | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_HAS_GLINE_TABLES_ONLY_FLAG | 
|  | "-gline-tables-only") | 
|  | endif() | 
|  | if (LLVM_USE_SANITIZER STREQUAL "Address") | 
|  | list(APPEND LIBCXX_CXX_FLAGS "-fsanitize=address") | 
|  | elseif (LLVM_USE_SANITIZER MATCHES "Memory(WithOrigins)?") | 
|  | list(APPEND LIBCXX_CXX_FLAGS "-fsanitize=memory") | 
|  | if (LLVM_USE_SANITIZER STREQUAL "MemoryWithOrigins") | 
|  | list(APPEND LIBCXX_CXX_FLAGS "-fsanitize-memory-track-origins") | 
|  | endif() | 
|  | elseif (LLVM_USE_SANITIZER STREQUAL "Undefined") | 
|  | list(APPEND LIBCXX_CXX_FLAGS | 
|  | "-fsanitize=undefined -fno-sanitize=vptr,function -fno-sanitize-recover") | 
|  | elseif (LLVM_USE_SANITIZER STREQUAL "Thread") | 
|  | list(APPEND LIBCXX_CXX_FLAGS "-fsanitize=thread") | 
|  | else() | 
|  | message(WARNING "Unsupported value of LLVM_USE_SANITIZER: ${LLVM_USE_SANITIZER}") | 
|  | endif() | 
|  | elseif(MSVC) | 
|  | message(WARNING "LLVM_USE_SANITIZER is not supported with MSVC") | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_TARGET_TRIPLE | 
|  | "-target ${LIBCXX_TARGET_TRIPLE}") | 
|  |  | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_SYSROOT "--sysroot ${LIBCXX_SYSROOT}") | 
|  | append_if(LIBCXX_CXX_FLAGS LIBCXX_GCC_TOOLCHAIN | 
|  | "-gcc-toolchain ${LIBCXX_GCC_TOOLCHAIN}") | 
|  |  | 
|  | if (LLVM_USE_SANITIZER AND LIBCXX_GENERATE_COVERAGE) | 
|  | message(FATAL_ERROR "LLVM_USE_SANITIZER cannot be used with LIBCXX_GENERATE_COVERAGE") | 
|  | endif() | 
|  |  | 
|  | string(REPLACE ";" " " LIBCXX_CXX_FLAGS "${LIBCXX_CXX_FLAGS}") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${LIBCXX_CXX_FLAGS}") | 
|  |  | 
|  | #=============================================================================== | 
|  | # Setup Source Code | 
|  | #=============================================================================== | 
|  |  | 
|  | include_directories(include) | 
|  | add_subdirectory(include) | 
|  |  | 
|  | # Add source code. This also contains all of the logic for deciding linker flags | 
|  | # soname, etc... | 
|  | add_subdirectory(lib) | 
|  |  | 
|  | #=============================================================================== | 
|  | # Setup Tests | 
|  | #=============================================================================== | 
|  |  | 
|  | add_subdirectory(test) |