| //===- SectionMemoryManager.cpp - Memory manager for MCJIT/RtDyld *- C++ -*-==// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file implements the section-based memory manager used by the MCJIT |
| // execution engine and RuntimeDyld |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "llvm/Config/config.h" |
| #include "llvm/ExecutionEngine/SectionMemoryManager.h" |
| #include "llvm/Support/MathExtras.h" |
| |
| namespace llvm { |
| |
| uint8_t *SectionMemoryManager::allocateDataSection(uintptr_t Size, |
| unsigned Alignment, |
| unsigned SectionID, |
| StringRef SectionName, |
| bool IsReadOnly) { |
| if (IsReadOnly) |
| return allocateSection(RODataMem, Size, Alignment); |
| return allocateSection(RWDataMem, Size, Alignment); |
| } |
| |
| uint8_t *SectionMemoryManager::allocateCodeSection(uintptr_t Size, |
| unsigned Alignment, |
| unsigned SectionID, |
| StringRef SectionName) { |
| return allocateSection(CodeMem, Size, Alignment); |
| } |
| |
| uint8_t *SectionMemoryManager::allocateSection(MemoryGroup &MemGroup, |
| uintptr_t Size, |
| unsigned Alignment) { |
| if (!Alignment) |
| Alignment = 16; |
| |
| assert(!(Alignment & (Alignment - 1)) && "Alignment must be a power of two."); |
| |
| uintptr_t RequiredSize = Alignment * ((Size + Alignment - 1)/Alignment + 1); |
| uintptr_t Addr = 0; |
| |
| // Look in the list of free memory regions and use a block there if one |
| // is available. |
| for (sys::MemoryBlock &MB : MemGroup.FreeMem) { |
| if (MB.size() >= RequiredSize) { |
| Addr = (uintptr_t)MB.base(); |
| uintptr_t EndOfBlock = Addr + MB.size(); |
| // Align the address. |
| Addr = (Addr + Alignment - 1) & ~(uintptr_t)(Alignment - 1); |
| // Store cutted free memory block. |
| MB = sys::MemoryBlock((void *)(Addr + Size), EndOfBlock - Addr - Size); |
| return (uint8_t*)Addr; |
| } |
| } |
| |
| // No pre-allocated free block was large enough. Allocate a new memory region. |
| // Note that all sections get allocated as read-write. The permissions will |
| // be updated later based on memory group. |
| // |
| // FIXME: It would be useful to define a default allocation size (or add |
| // it as a constructor parameter) to minimize the number of allocations. |
| // |
| // FIXME: Initialize the Near member for each memory group to avoid |
| // interleaving. |
| std::error_code ec; |
| sys::MemoryBlock MB = sys::Memory::allocateMappedMemory(RequiredSize, |
| &MemGroup.Near, |
| sys::Memory::MF_READ | |
| sys::Memory::MF_WRITE, |
| ec); |
| if (ec) { |
| // FIXME: Add error propagation to the interface. |
| return nullptr; |
| } |
| |
| // Save this address as the basis for our next request |
| MemGroup.Near = MB; |
| |
| MemGroup.PendingMem.push_back(MB); |
| Addr = (uintptr_t)MB.base(); |
| uintptr_t EndOfBlock = Addr + MB.size(); |
| |
| // Align the address. |
| Addr = (Addr + Alignment - 1) & ~(uintptr_t)(Alignment - 1); |
| |
| // The allocateMappedMemory may allocate much more memory than we need. In |
| // this case, we store the unused memory as a free memory block. |
| unsigned FreeSize = EndOfBlock-Addr-Size; |
| if (FreeSize > 16) |
| MemGroup.FreeMem.push_back(sys::MemoryBlock((void*)(Addr + Size), FreeSize)); |
| |
| // Return aligned address |
| return (uint8_t*)Addr; |
| } |
| |
| bool SectionMemoryManager::finalizeMemory(std::string *ErrMsg) |
| { |
| // FIXME: Should in-progress permissions be reverted if an error occurs? |
| std::error_code ec; |
| |
| // Don't allow free memory blocks to be used after setting protection flags. |
| CodeMem.FreeMem.clear(); |
| |
| // Make code memory executable. |
| ec = applyMemoryGroupPermissions(CodeMem, |
| sys::Memory::MF_READ | sys::Memory::MF_EXEC); |
| if (ec) { |
| if (ErrMsg) { |
| *ErrMsg = ec.message(); |
| } |
| return true; |
| } |
| |
| // Don't allow free memory blocks to be used after setting protection flags. |
| RODataMem.FreeMem.clear(); |
| |
| // Make read-only data memory read-only. |
| ec = applyMemoryGroupPermissions(RODataMem, |
| sys::Memory::MF_READ | sys::Memory::MF_EXEC); |
| if (ec) { |
| if (ErrMsg) { |
| *ErrMsg = ec.message(); |
| } |
| return true; |
| } |
| |
| // Read-write data memory already has the correct permissions |
| |
| // Some platforms with separate data cache and instruction cache require |
| // explicit cache flush, otherwise JIT code manipulations (like resolved |
| // relocations) will get to the data cache but not to the instruction cache. |
| invalidateInstructionCache(); |
| |
| // Now, remember that we have successfully applied the permissions to avoid |
| // having to apply them again. |
| CodeMem.AllocatedMem.append(CodeMem.PendingMem.begin(),CodeMem.PendingMem.end()); |
| CodeMem.PendingMem.clear(); |
| |
| RODataMem.AllocatedMem.append(RODataMem.PendingMem.begin(),RODataMem.PendingMem.end()); |
| RODataMem.PendingMem.clear(); |
| |
| return false; |
| } |
| |
| std::error_code |
| SectionMemoryManager::applyMemoryGroupPermissions(MemoryGroup &MemGroup, |
| unsigned Permissions) { |
| |
| for (sys::MemoryBlock &MB : MemGroup.PendingMem) |
| if (std::error_code EC = sys::Memory::protectMappedMemory(MB, Permissions)) |
| return EC; |
| |
| return std::error_code(); |
| } |
| |
| void SectionMemoryManager::invalidateInstructionCache() { |
| for (sys::MemoryBlock &Block : CodeMem.PendingMem) |
| sys::Memory::InvalidateInstructionCache(Block.base(), Block.size()); |
| } |
| |
| SectionMemoryManager::~SectionMemoryManager() { |
| for (MemoryGroup *Group : {&CodeMem, &RWDataMem, &RODataMem}) { |
| for (sys::MemoryBlock &Block : Group->AllocatedMem) |
| sys::Memory::releaseMappedMemory(Block); |
| for (sys::MemoryBlock &Block : Group->PendingMem) |
| sys::Memory::releaseMappedMemory(Block); |
| } |
| } |
| |
| } // namespace llvm |
| |