| //===-- MipsSEISelDAGToDAG.cpp - A Dag to Dag Inst Selector for MipsSE ----===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // Subclass of MipsDAGToDAGISel specialized for mips32/64. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #include "MipsSEISelDAGToDAG.h" |
| #include "MCTargetDesc/MipsBaseInfo.h" |
| #include "Mips.h" |
| #include "MipsAnalyzeImmediate.h" |
| #include "MipsMachineFunction.h" |
| #include "MipsRegisterInfo.h" |
| #include "llvm/CodeGen/MachineConstantPool.h" |
| #include "llvm/CodeGen/MachineFrameInfo.h" |
| #include "llvm/CodeGen/MachineFunction.h" |
| #include "llvm/CodeGen/MachineInstrBuilder.h" |
| #include "llvm/CodeGen/MachineRegisterInfo.h" |
| #include "llvm/CodeGen/SelectionDAGNodes.h" |
| #include "llvm/IR/CFG.h" |
| #include "llvm/IR/GlobalValue.h" |
| #include "llvm/IR/Instructions.h" |
| #include "llvm/IR/Intrinsics.h" |
| #include "llvm/IR/Type.h" |
| #include "llvm/Support/Debug.h" |
| #include "llvm/Support/ErrorHandling.h" |
| #include "llvm/Support/raw_ostream.h" |
| #include "llvm/Target/TargetMachine.h" |
| using namespace llvm; |
| |
| #define DEBUG_TYPE "mips-isel" |
| |
| bool MipsSEDAGToDAGISel::runOnMachineFunction(MachineFunction &MF) { |
| Subtarget = &TM.getSubtarget<MipsSubtarget>(); |
| if (Subtarget->inMips16Mode()) |
| return false; |
| return MipsDAGToDAGISel::runOnMachineFunction(MF); |
| } |
| |
| void MipsSEDAGToDAGISel::addDSPCtrlRegOperands(bool IsDef, MachineInstr &MI, |
| MachineFunction &MF) { |
| MachineInstrBuilder MIB(MF, &MI); |
| unsigned Mask = MI.getOperand(1).getImm(); |
| unsigned Flag = IsDef ? RegState::ImplicitDefine : RegState::Implicit; |
| |
| if (Mask & 1) |
| MIB.addReg(Mips::DSPPos, Flag); |
| |
| if (Mask & 2) |
| MIB.addReg(Mips::DSPSCount, Flag); |
| |
| if (Mask & 4) |
| MIB.addReg(Mips::DSPCarry, Flag); |
| |
| if (Mask & 8) |
| MIB.addReg(Mips::DSPOutFlag, Flag); |
| |
| if (Mask & 16) |
| MIB.addReg(Mips::DSPCCond, Flag); |
| |
| if (Mask & 32) |
| MIB.addReg(Mips::DSPEFI, Flag); |
| } |
| |
| unsigned MipsSEDAGToDAGISel::getMSACtrlReg(const SDValue RegIdx) const { |
| switch (cast<ConstantSDNode>(RegIdx)->getZExtValue()) { |
| default: |
| llvm_unreachable("Could not map int to register"); |
| case 0: return Mips::MSAIR; |
| case 1: return Mips::MSACSR; |
| case 2: return Mips::MSAAccess; |
| case 3: return Mips::MSASave; |
| case 4: return Mips::MSAModify; |
| case 5: return Mips::MSARequest; |
| case 6: return Mips::MSAMap; |
| case 7: return Mips::MSAUnmap; |
| } |
| } |
| |
| bool MipsSEDAGToDAGISel::replaceUsesWithZeroReg(MachineRegisterInfo *MRI, |
| const MachineInstr& MI) { |
| unsigned DstReg = 0, ZeroReg = 0; |
| |
| // Check if MI is "addiu $dst, $zero, 0" or "daddiu $dst, $zero, 0". |
| if ((MI.getOpcode() == Mips::ADDiu) && |
| (MI.getOperand(1).getReg() == Mips::ZERO) && |
| (MI.getOperand(2).getImm() == 0)) { |
| DstReg = MI.getOperand(0).getReg(); |
| ZeroReg = Mips::ZERO; |
| } else if ((MI.getOpcode() == Mips::DADDiu) && |
| (MI.getOperand(1).getReg() == Mips::ZERO_64) && |
| (MI.getOperand(2).getImm() == 0)) { |
| DstReg = MI.getOperand(0).getReg(); |
| ZeroReg = Mips::ZERO_64; |
| } |
| |
| if (!DstReg) |
| return false; |
| |
| // Replace uses with ZeroReg. |
| for (MachineRegisterInfo::use_iterator U = MRI->use_begin(DstReg), |
| E = MRI->use_end(); U != E;) { |
| MachineOperand &MO = *U; |
| unsigned OpNo = U.getOperandNo(); |
| MachineInstr *MI = MO.getParent(); |
| ++U; |
| |
| // Do not replace if it is a phi's operand or is tied to def operand. |
| if (MI->isPHI() || MI->isRegTiedToDefOperand(OpNo) || MI->isPseudo()) |
| continue; |
| |
| MO.setReg(ZeroReg); |
| } |
| |
| return true; |
| } |
| |
| void MipsSEDAGToDAGISel::initGlobalBaseReg(MachineFunction &MF) { |
| MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>(); |
| |
| if (!MipsFI->globalBaseRegSet()) |
| return; |
| |
| MachineBasicBlock &MBB = MF.front(); |
| MachineBasicBlock::iterator I = MBB.begin(); |
| MachineRegisterInfo &RegInfo = MF.getRegInfo(); |
| const TargetInstrInfo &TII = *MF.getSubtarget().getInstrInfo(); |
| DebugLoc DL = I != MBB.end() ? I->getDebugLoc() : DebugLoc(); |
| unsigned V0, V1, GlobalBaseReg = MipsFI->getGlobalBaseReg(); |
| const TargetRegisterClass *RC; |
| |
| RC = (Subtarget->isABI_N64()) ? &Mips::GPR64RegClass : &Mips::GPR32RegClass; |
| |
| V0 = RegInfo.createVirtualRegister(RC); |
| V1 = RegInfo.createVirtualRegister(RC); |
| |
| if (Subtarget->isABI_N64()) { |
| MF.getRegInfo().addLiveIn(Mips::T9_64); |
| MBB.addLiveIn(Mips::T9_64); |
| |
| // lui $v0, %hi(%neg(%gp_rel(fname))) |
| // daddu $v1, $v0, $t9 |
| // daddiu $globalbasereg, $v1, %lo(%neg(%gp_rel(fname))) |
| const GlobalValue *FName = MF.getFunction(); |
| BuildMI(MBB, I, DL, TII.get(Mips::LUi64), V0) |
| .addGlobalAddress(FName, 0, MipsII::MO_GPOFF_HI); |
| BuildMI(MBB, I, DL, TII.get(Mips::DADDu), V1).addReg(V0) |
| .addReg(Mips::T9_64); |
| BuildMI(MBB, I, DL, TII.get(Mips::DADDiu), GlobalBaseReg).addReg(V1) |
| .addGlobalAddress(FName, 0, MipsII::MO_GPOFF_LO); |
| return; |
| } |
| |
| if (MF.getTarget().getRelocationModel() == Reloc::Static) { |
| // Set global register to __gnu_local_gp. |
| // |
| // lui $v0, %hi(__gnu_local_gp) |
| // addiu $globalbasereg, $v0, %lo(__gnu_local_gp) |
| BuildMI(MBB, I, DL, TII.get(Mips::LUi), V0) |
| .addExternalSymbol("__gnu_local_gp", MipsII::MO_ABS_HI); |
| BuildMI(MBB, I, DL, TII.get(Mips::ADDiu), GlobalBaseReg).addReg(V0) |
| .addExternalSymbol("__gnu_local_gp", MipsII::MO_ABS_LO); |
| return; |
| } |
| |
| MF.getRegInfo().addLiveIn(Mips::T9); |
| MBB.addLiveIn(Mips::T9); |
| |
| if (Subtarget->isABI_N32()) { |
| // lui $v0, %hi(%neg(%gp_rel(fname))) |
| // addu $v1, $v0, $t9 |
| // addiu $globalbasereg, $v1, %lo(%neg(%gp_rel(fname))) |
| const GlobalValue *FName = MF.getFunction(); |
| BuildMI(MBB, I, DL, TII.get(Mips::LUi), V0) |
| .addGlobalAddress(FName, 0, MipsII::MO_GPOFF_HI); |
| BuildMI(MBB, I, DL, TII.get(Mips::ADDu), V1).addReg(V0).addReg(Mips::T9); |
| BuildMI(MBB, I, DL, TII.get(Mips::ADDiu), GlobalBaseReg).addReg(V1) |
| .addGlobalAddress(FName, 0, MipsII::MO_GPOFF_LO); |
| return; |
| } |
| |
| assert(Subtarget->isABI_O32()); |
| |
| // For O32 ABI, the following instruction sequence is emitted to initialize |
| // the global base register: |
| // |
| // 0. lui $2, %hi(_gp_disp) |
| // 1. addiu $2, $2, %lo(_gp_disp) |
| // 2. addu $globalbasereg, $2, $t9 |
| // |
| // We emit only the last instruction here. |
| // |
| // GNU linker requires that the first two instructions appear at the beginning |
| // of a function and no instructions be inserted before or between them. |
| // The two instructions are emitted during lowering to MC layer in order to |
| // avoid any reordering. |
| // |
| // Register $2 (Mips::V0) is added to the list of live-in registers to ensure |
| // the value instruction 1 (addiu) defines is valid when instruction 2 (addu) |
| // reads it. |
| MF.getRegInfo().addLiveIn(Mips::V0); |
| MBB.addLiveIn(Mips::V0); |
| BuildMI(MBB, I, DL, TII.get(Mips::ADDu), GlobalBaseReg) |
| .addReg(Mips::V0).addReg(Mips::T9); |
| } |
| |
| void MipsSEDAGToDAGISel::processFunctionAfterISel(MachineFunction &MF) { |
| initGlobalBaseReg(MF); |
| |
| MachineRegisterInfo *MRI = &MF.getRegInfo(); |
| |
| for (MachineFunction::iterator MFI = MF.begin(), MFE = MF.end(); MFI != MFE; |
| ++MFI) |
| for (MachineBasicBlock::iterator I = MFI->begin(); I != MFI->end(); ++I) { |
| if (I->getOpcode() == Mips::RDDSP) |
| addDSPCtrlRegOperands(false, *I, MF); |
| else if (I->getOpcode() == Mips::WRDSP) |
| addDSPCtrlRegOperands(true, *I, MF); |
| else |
| replaceUsesWithZeroReg(MRI, *I); |
| } |
| } |
| |
| SDNode *MipsSEDAGToDAGISel::selectAddESubE(unsigned MOp, SDValue InFlag, |
| SDValue CmpLHS, SDLoc DL, |
| SDNode *Node) const { |
| unsigned Opc = InFlag.getOpcode(); (void)Opc; |
| |
| assert(((Opc == ISD::ADDC || Opc == ISD::ADDE) || |
| (Opc == ISD::SUBC || Opc == ISD::SUBE)) && |
| "(ADD|SUB)E flag operand must come from (ADD|SUB)C/E insn"); |
| |
| unsigned SLTuOp = Mips::SLTu, ADDuOp = Mips::ADDu; |
| if (Subtarget->isGP64bit()) { |
| SLTuOp = Mips::SLTu64; |
| ADDuOp = Mips::DADDu; |
| } |
| |
| SDValue Ops[] = { CmpLHS, InFlag.getOperand(1) }; |
| SDValue LHS = Node->getOperand(0), RHS = Node->getOperand(1); |
| EVT VT = LHS.getValueType(); |
| |
| SDNode *Carry = CurDAG->getMachineNode(SLTuOp, DL, VT, Ops); |
| |
| if (Subtarget->isGP64bit()) { |
| // On 64-bit targets, sltu produces an i64 but our backend currently says |
| // that SLTu64 produces an i32. We need to fix this in the long run but for |
| // now, just make the DAG type-correct by asserting the upper bits are zero. |
| Carry = CurDAG->getMachineNode(Mips::SUBREG_TO_REG, DL, VT, |
| CurDAG->getTargetConstant(0, VT), |
| SDValue(Carry, 0), |
| CurDAG->getTargetConstant(Mips::sub_32, VT)); |
| } |
| |
| SDNode *AddCarry = CurDAG->getMachineNode(ADDuOp, DL, VT, |
| SDValue(Carry, 0), RHS); |
| |
| return CurDAG->SelectNodeTo(Node, MOp, VT, MVT::Glue, LHS, |
| SDValue(AddCarry, 0)); |
| } |
| |
| /// Match frameindex |
| bool MipsSEDAGToDAGISel::selectAddrFrameIndex(SDValue Addr, SDValue &Base, |
| SDValue &Offset) const { |
| if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode>(Addr)) { |
| EVT ValTy = Addr.getValueType(); |
| |
| Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy); |
| Offset = CurDAG->getTargetConstant(0, ValTy); |
| return true; |
| } |
| return false; |
| } |
| |
| /// Match frameindex+offset and frameindex|offset |
| bool MipsSEDAGToDAGISel::selectAddrFrameIndexOffset(SDValue Addr, SDValue &Base, |
| SDValue &Offset, |
| unsigned OffsetBits) const { |
| if (CurDAG->isBaseWithConstantOffset(Addr)) { |
| ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Addr.getOperand(1)); |
| if (isIntN(OffsetBits, CN->getSExtValue())) { |
| EVT ValTy = Addr.getValueType(); |
| |
| // If the first operand is a FI, get the TargetFI Node |
| if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode> |
| (Addr.getOperand(0))) |
| Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy); |
| else |
| Base = Addr.getOperand(0); |
| |
| Offset = CurDAG->getTargetConstant(CN->getZExtValue(), ValTy); |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /// ComplexPattern used on MipsInstrInfo |
| /// Used on Mips Load/Store instructions |
| bool MipsSEDAGToDAGISel::selectAddrRegImm(SDValue Addr, SDValue &Base, |
| SDValue &Offset) const { |
| // if Address is FI, get the TargetFrameIndex. |
| if (selectAddrFrameIndex(Addr, Base, Offset)) |
| return true; |
| |
| // on PIC code Load GA |
| if (Addr.getOpcode() == MipsISD::Wrapper) { |
| Base = Addr.getOperand(0); |
| Offset = Addr.getOperand(1); |
| return true; |
| } |
| |
| if (TM.getRelocationModel() != Reloc::PIC_) { |
| if ((Addr.getOpcode() == ISD::TargetExternalSymbol || |
| Addr.getOpcode() == ISD::TargetGlobalAddress)) |
| return false; |
| } |
| |
| // Addresses of the form FI+const or FI|const |
| if (selectAddrFrameIndexOffset(Addr, Base, Offset, 16)) |
| return true; |
| |
| // Operand is a result from an ADD. |
| if (Addr.getOpcode() == ISD::ADD) { |
| // When loading from constant pools, load the lower address part in |
| // the instruction itself. Example, instead of: |
| // lui $2, %hi($CPI1_0) |
| // addiu $2, $2, %lo($CPI1_0) |
| // lwc1 $f0, 0($2) |
| // Generate: |
| // lui $2, %hi($CPI1_0) |
| // lwc1 $f0, %lo($CPI1_0)($2) |
| if (Addr.getOperand(1).getOpcode() == MipsISD::Lo || |
| Addr.getOperand(1).getOpcode() == MipsISD::GPRel) { |
| SDValue Opnd0 = Addr.getOperand(1).getOperand(0); |
| if (isa<ConstantPoolSDNode>(Opnd0) || isa<GlobalAddressSDNode>(Opnd0) || |
| isa<JumpTableSDNode>(Opnd0)) { |
| Base = Addr.getOperand(0); |
| Offset = Opnd0; |
| return true; |
| } |
| } |
| } |
| |
| return false; |
| } |
| |
| /// ComplexPattern used on MipsInstrInfo |
| /// Used on Mips Load/Store instructions |
| bool MipsSEDAGToDAGISel::selectAddrRegReg(SDValue Addr, SDValue &Base, |
| SDValue &Offset) const { |
| // Operand is a result from an ADD. |
| if (Addr.getOpcode() == ISD::ADD) { |
| Base = Addr.getOperand(0); |
| Offset = Addr.getOperand(1); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool MipsSEDAGToDAGISel::selectAddrDefault(SDValue Addr, SDValue &Base, |
| SDValue &Offset) const { |
| Base = Addr; |
| Offset = CurDAG->getTargetConstant(0, Addr.getValueType()); |
| return true; |
| } |
| |
| bool MipsSEDAGToDAGISel::selectIntAddr(SDValue Addr, SDValue &Base, |
| SDValue &Offset) const { |
| return selectAddrRegImm(Addr, Base, Offset) || |
| selectAddrDefault(Addr, Base, Offset); |
| } |
| |
| bool MipsSEDAGToDAGISel::selectAddrRegImm10(SDValue Addr, SDValue &Base, |
| SDValue &Offset) const { |
| if (selectAddrFrameIndex(Addr, Base, Offset)) |
| return true; |
| |
| if (selectAddrFrameIndexOffset(Addr, Base, Offset, 10)) |
| return true; |
| |
| return false; |
| } |
| |
| /// Used on microMIPS Load/Store unaligned instructions (12-bit offset) |
| bool MipsSEDAGToDAGISel::selectAddrRegImm12(SDValue Addr, SDValue &Base, |
| SDValue &Offset) const { |
| if (selectAddrFrameIndex(Addr, Base, Offset)) |
| return true; |
| |
| if (selectAddrFrameIndexOffset(Addr, Base, Offset, 12)) |
| return true; |
| |
| return false; |
| } |
| |
| bool MipsSEDAGToDAGISel::selectIntAddrMM(SDValue Addr, SDValue &Base, |
| SDValue &Offset) const { |
| return selectAddrRegImm12(Addr, Base, Offset) || |
| selectAddrDefault(Addr, Base, Offset); |
| } |
| |
| bool MipsSEDAGToDAGISel::selectIntAddrMSA(SDValue Addr, SDValue &Base, |
| SDValue &Offset) const { |
| if (selectAddrRegImm10(Addr, Base, Offset)) |
| return true; |
| |
| if (selectAddrDefault(Addr, Base, Offset)) |
| return true; |
| |
| return false; |
| } |
| |
| // Select constant vector splats. |
| // |
| // Returns true and sets Imm if: |
| // * MSA is enabled |
| // * N is a ISD::BUILD_VECTOR representing a constant splat |
| bool MipsSEDAGToDAGISel::selectVSplat(SDNode *N, APInt &Imm) const { |
| if (!Subtarget->hasMSA()) |
| return false; |
| |
| BuildVectorSDNode *Node = dyn_cast<BuildVectorSDNode>(N); |
| |
| if (!Node) |
| return false; |
| |
| APInt SplatValue, SplatUndef; |
| unsigned SplatBitSize; |
| bool HasAnyUndefs; |
| |
| if (!Node->isConstantSplat(SplatValue, SplatUndef, SplatBitSize, |
| HasAnyUndefs, 8, |
| !Subtarget->isLittle())) |
| return false; |
| |
| Imm = SplatValue; |
| |
| return true; |
| } |
| |
| // Select constant vector splats. |
| // |
| // In addition to the requirements of selectVSplat(), this function returns |
| // true and sets Imm if: |
| // * The splat value is the same width as the elements of the vector |
| // * The splat value fits in an integer with the specified signed-ness and |
| // width. |
| // |
| // This function looks through ISD::BITCAST nodes. |
| // TODO: This might not be appropriate for big-endian MSA since BITCAST is |
| // sometimes a shuffle in big-endian mode. |
| // |
| // It's worth noting that this function is not used as part of the selection |
| // of ldi.[bhwd] since it does not permit using the wrong-typed ldi.[bhwd] |
| // instruction to achieve the desired bit pattern. ldi.[bhwd] is selected in |
| // MipsSEDAGToDAGISel::selectNode. |
| bool MipsSEDAGToDAGISel:: |
| selectVSplatCommon(SDValue N, SDValue &Imm, bool Signed, |
| unsigned ImmBitSize) const { |
| APInt ImmValue; |
| EVT EltTy = N->getValueType(0).getVectorElementType(); |
| |
| if (N->getOpcode() == ISD::BITCAST) |
| N = N->getOperand(0); |
| |
| if (selectVSplat (N.getNode(), ImmValue) && |
| ImmValue.getBitWidth() == EltTy.getSizeInBits()) { |
| if (( Signed && ImmValue.isSignedIntN(ImmBitSize)) || |
| (!Signed && ImmValue.isIntN(ImmBitSize))) { |
| Imm = CurDAG->getTargetConstant(ImmValue, EltTy); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| // Select constant vector splats. |
| bool MipsSEDAGToDAGISel:: |
| selectVSplatUimm1(SDValue N, SDValue &Imm) const { |
| return selectVSplatCommon(N, Imm, false, 1); |
| } |
| |
| bool MipsSEDAGToDAGISel:: |
| selectVSplatUimm2(SDValue N, SDValue &Imm) const { |
| return selectVSplatCommon(N, Imm, false, 2); |
| } |
| |
| bool MipsSEDAGToDAGISel:: |
| selectVSplatUimm3(SDValue N, SDValue &Imm) const { |
| return selectVSplatCommon(N, Imm, false, 3); |
| } |
| |
| // Select constant vector splats. |
| bool MipsSEDAGToDAGISel:: |
| selectVSplatUimm4(SDValue N, SDValue &Imm) const { |
| return selectVSplatCommon(N, Imm, false, 4); |
| } |
| |
| // Select constant vector splats. |
| bool MipsSEDAGToDAGISel:: |
| selectVSplatUimm5(SDValue N, SDValue &Imm) const { |
| return selectVSplatCommon(N, Imm, false, 5); |
| } |
| |
| // Select constant vector splats. |
| bool MipsSEDAGToDAGISel:: |
| selectVSplatUimm6(SDValue N, SDValue &Imm) const { |
| return selectVSplatCommon(N, Imm, false, 6); |
| } |
| |
| // Select constant vector splats. |
| bool MipsSEDAGToDAGISel:: |
| selectVSplatUimm8(SDValue N, SDValue &Imm) const { |
| return selectVSplatCommon(N, Imm, false, 8); |
| } |
| |
| // Select constant vector splats. |
| bool MipsSEDAGToDAGISel:: |
| selectVSplatSimm5(SDValue N, SDValue &Imm) const { |
| return selectVSplatCommon(N, Imm, true, 5); |
| } |
| |
| // Select constant vector splats whose value is a power of 2. |
| // |
| // In addition to the requirements of selectVSplat(), this function returns |
| // true and sets Imm if: |
| // * The splat value is the same width as the elements of the vector |
| // * The splat value is a power of two. |
| // |
| // This function looks through ISD::BITCAST nodes. |
| // TODO: This might not be appropriate for big-endian MSA since BITCAST is |
| // sometimes a shuffle in big-endian mode. |
| bool MipsSEDAGToDAGISel::selectVSplatUimmPow2(SDValue N, SDValue &Imm) const { |
| APInt ImmValue; |
| EVT EltTy = N->getValueType(0).getVectorElementType(); |
| |
| if (N->getOpcode() == ISD::BITCAST) |
| N = N->getOperand(0); |
| |
| if (selectVSplat (N.getNode(), ImmValue) && |
| ImmValue.getBitWidth() == EltTy.getSizeInBits()) { |
| int32_t Log2 = ImmValue.exactLogBase2(); |
| |
| if (Log2 != -1) { |
| Imm = CurDAG->getTargetConstant(Log2, EltTy); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| // Select constant vector splats whose value only has a consecutive sequence |
| // of left-most bits set (e.g. 0b11...1100...00). |
| // |
| // In addition to the requirements of selectVSplat(), this function returns |
| // true and sets Imm if: |
| // * The splat value is the same width as the elements of the vector |
| // * The splat value is a consecutive sequence of left-most bits. |
| // |
| // This function looks through ISD::BITCAST nodes. |
| // TODO: This might not be appropriate for big-endian MSA since BITCAST is |
| // sometimes a shuffle in big-endian mode. |
| bool MipsSEDAGToDAGISel::selectVSplatMaskL(SDValue N, SDValue &Imm) const { |
| APInt ImmValue; |
| EVT EltTy = N->getValueType(0).getVectorElementType(); |
| |
| if (N->getOpcode() == ISD::BITCAST) |
| N = N->getOperand(0); |
| |
| if (selectVSplat(N.getNode(), ImmValue) && |
| ImmValue.getBitWidth() == EltTy.getSizeInBits()) { |
| // Extract the run of set bits starting with bit zero from the bitwise |
| // inverse of ImmValue, and test that the inverse of this is the same |
| // as the original value. |
| if (ImmValue == ~(~ImmValue & ~(~ImmValue + 1))) { |
| |
| Imm = CurDAG->getTargetConstant(ImmValue.countPopulation(), EltTy); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| // Select constant vector splats whose value only has a consecutive sequence |
| // of right-most bits set (e.g. 0b00...0011...11). |
| // |
| // In addition to the requirements of selectVSplat(), this function returns |
| // true and sets Imm if: |
| // * The splat value is the same width as the elements of the vector |
| // * The splat value is a consecutive sequence of right-most bits. |
| // |
| // This function looks through ISD::BITCAST nodes. |
| // TODO: This might not be appropriate for big-endian MSA since BITCAST is |
| // sometimes a shuffle in big-endian mode. |
| bool MipsSEDAGToDAGISel::selectVSplatMaskR(SDValue N, SDValue &Imm) const { |
| APInt ImmValue; |
| EVT EltTy = N->getValueType(0).getVectorElementType(); |
| |
| if (N->getOpcode() == ISD::BITCAST) |
| N = N->getOperand(0); |
| |
| if (selectVSplat(N.getNode(), ImmValue) && |
| ImmValue.getBitWidth() == EltTy.getSizeInBits()) { |
| // Extract the run of set bits starting with bit zero, and test that the |
| // result is the same as the original value |
| if (ImmValue == (ImmValue & ~(ImmValue + 1))) { |
| Imm = CurDAG->getTargetConstant(ImmValue.countPopulation(), EltTy); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| bool MipsSEDAGToDAGISel::selectVSplatUimmInvPow2(SDValue N, |
| SDValue &Imm) const { |
| APInt ImmValue; |
| EVT EltTy = N->getValueType(0).getVectorElementType(); |
| |
| if (N->getOpcode() == ISD::BITCAST) |
| N = N->getOperand(0); |
| |
| if (selectVSplat(N.getNode(), ImmValue) && |
| ImmValue.getBitWidth() == EltTy.getSizeInBits()) { |
| int32_t Log2 = (~ImmValue).exactLogBase2(); |
| |
| if (Log2 != -1) { |
| Imm = CurDAG->getTargetConstant(Log2, EltTy); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| std::pair<bool, SDNode*> MipsSEDAGToDAGISel::selectNode(SDNode *Node) { |
| unsigned Opcode = Node->getOpcode(); |
| SDLoc DL(Node); |
| |
| /// |
| // Instruction Selection not handled by the auto-generated |
| // tablegen selection should be handled here. |
| /// |
| SDNode *Result; |
| |
| switch(Opcode) { |
| default: break; |
| |
| case ISD::SUBE: { |
| SDValue InFlag = Node->getOperand(2); |
| unsigned Opc = Subtarget->isGP64bit() ? Mips::DSUBu : Mips::SUBu; |
| Result = selectAddESubE(Opc, InFlag, InFlag.getOperand(0), DL, Node); |
| return std::make_pair(true, Result); |
| } |
| |
| case ISD::ADDE: { |
| if (Subtarget->hasDSP()) // Select DSP instructions, ADDSC and ADDWC. |
| break; |
| SDValue InFlag = Node->getOperand(2); |
| unsigned Opc = Subtarget->isGP64bit() ? Mips::DADDu : Mips::ADDu; |
| Result = selectAddESubE(Opc, InFlag, InFlag.getValue(0), DL, Node); |
| return std::make_pair(true, Result); |
| } |
| |
| case ISD::ConstantFP: { |
| ConstantFPSDNode *CN = dyn_cast<ConstantFPSDNode>(Node); |
| if (Node->getValueType(0) == MVT::f64 && CN->isExactlyValue(+0.0)) { |
| if (Subtarget->isGP64bit()) { |
| SDValue Zero = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), DL, |
| Mips::ZERO_64, MVT::i64); |
| Result = CurDAG->getMachineNode(Mips::DMTC1, DL, MVT::f64, Zero); |
| } else if (Subtarget->isFP64bit()) { |
| SDValue Zero = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), DL, |
| Mips::ZERO, MVT::i32); |
| Result = CurDAG->getMachineNode(Mips::BuildPairF64_64, DL, MVT::f64, |
| Zero, Zero); |
| } else { |
| SDValue Zero = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), DL, |
| Mips::ZERO, MVT::i32); |
| Result = CurDAG->getMachineNode(Mips::BuildPairF64, DL, MVT::f64, Zero, |
| Zero); |
| } |
| |
| return std::make_pair(true, Result); |
| } |
| break; |
| } |
| |
| case ISD::Constant: { |
| const ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Node); |
| unsigned Size = CN->getValueSizeInBits(0); |
| |
| if (Size == 32) |
| break; |
| |
| MipsAnalyzeImmediate AnalyzeImm; |
| int64_t Imm = CN->getSExtValue(); |
| |
| const MipsAnalyzeImmediate::InstSeq &Seq = |
| AnalyzeImm.Analyze(Imm, Size, false); |
| |
| MipsAnalyzeImmediate::InstSeq::const_iterator Inst = Seq.begin(); |
| SDLoc DL(CN); |
| SDNode *RegOpnd; |
| SDValue ImmOpnd = CurDAG->getTargetConstant(SignExtend64<16>(Inst->ImmOpnd), |
| MVT::i64); |
| |
| // The first instruction can be a LUi which is different from other |
| // instructions (ADDiu, ORI and SLL) in that it does not have a register |
| // operand. |
| if (Inst->Opc == Mips::LUi64) |
| RegOpnd = CurDAG->getMachineNode(Inst->Opc, DL, MVT::i64, ImmOpnd); |
| else |
| RegOpnd = |
| CurDAG->getMachineNode(Inst->Opc, DL, MVT::i64, |
| CurDAG->getRegister(Mips::ZERO_64, MVT::i64), |
| ImmOpnd); |
| |
| // The remaining instructions in the sequence are handled here. |
| for (++Inst; Inst != Seq.end(); ++Inst) { |
| ImmOpnd = CurDAG->getTargetConstant(SignExtend64<16>(Inst->ImmOpnd), |
| MVT::i64); |
| RegOpnd = CurDAG->getMachineNode(Inst->Opc, DL, MVT::i64, |
| SDValue(RegOpnd, 0), ImmOpnd); |
| } |
| |
| return std::make_pair(true, RegOpnd); |
| } |
| |
| case ISD::INTRINSIC_W_CHAIN: { |
| switch (cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue()) { |
| default: |
| break; |
| |
| case Intrinsic::mips_cfcmsa: { |
| SDValue ChainIn = Node->getOperand(0); |
| SDValue RegIdx = Node->getOperand(2); |
| SDValue Reg = CurDAG->getCopyFromReg(ChainIn, DL, |
| getMSACtrlReg(RegIdx), MVT::i32); |
| return std::make_pair(true, Reg.getNode()); |
| } |
| } |
| break; |
| } |
| |
| case ISD::INTRINSIC_WO_CHAIN: { |
| switch (cast<ConstantSDNode>(Node->getOperand(0))->getZExtValue()) { |
| default: |
| break; |
| |
| case Intrinsic::mips_move_v: |
| // Like an assignment but will always produce a move.v even if |
| // unnecessary. |
| return std::make_pair(true, |
| CurDAG->getMachineNode(Mips::MOVE_V, DL, |
| Node->getValueType(0), |
| Node->getOperand(1))); |
| } |
| break; |
| } |
| |
| case ISD::INTRINSIC_VOID: { |
| switch (cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue()) { |
| default: |
| break; |
| |
| case Intrinsic::mips_ctcmsa: { |
| SDValue ChainIn = Node->getOperand(0); |
| SDValue RegIdx = Node->getOperand(2); |
| SDValue Value = Node->getOperand(3); |
| SDValue ChainOut = CurDAG->getCopyToReg(ChainIn, DL, |
| getMSACtrlReg(RegIdx), Value); |
| return std::make_pair(true, ChainOut.getNode()); |
| } |
| } |
| break; |
| } |
| |
| case MipsISD::ThreadPointer: { |
| EVT PtrVT = getTargetLowering()->getPointerTy(); |
| unsigned RdhwrOpc, DestReg; |
| |
| if (PtrVT == MVT::i32) { |
| RdhwrOpc = Mips::RDHWR; |
| DestReg = Mips::V1; |
| } else { |
| RdhwrOpc = Mips::RDHWR64; |
| DestReg = Mips::V1_64; |
| } |
| |
| SDNode *Rdhwr = |
| CurDAG->getMachineNode(RdhwrOpc, SDLoc(Node), |
| Node->getValueType(0), |
| CurDAG->getRegister(Mips::HWR29, MVT::i32)); |
| SDValue Chain = CurDAG->getCopyToReg(CurDAG->getEntryNode(), DL, DestReg, |
| SDValue(Rdhwr, 0)); |
| SDValue ResNode = CurDAG->getCopyFromReg(Chain, DL, DestReg, PtrVT); |
| ReplaceUses(SDValue(Node, 0), ResNode); |
| return std::make_pair(true, ResNode.getNode()); |
| } |
| |
| case ISD::BUILD_VECTOR: { |
| // Select appropriate ldi.[bhwd] instructions for constant splats of |
| // 128-bit when MSA is enabled. Fixup any register class mismatches that |
| // occur as a result. |
| // |
| // This allows the compiler to use a wider range of immediates than would |
| // otherwise be allowed. If, for example, v4i32 could only use ldi.h then |
| // it would not be possible to load { 0x01010101, 0x01010101, 0x01010101, |
| // 0x01010101 } without using a constant pool. This would be sub-optimal |
| // when // 'ldi.b wd, 1' is capable of producing that bit-pattern in the |
| // same set/ of registers. Similarly, ldi.h isn't capable of producing { |
| // 0x00000000, 0x00000001, 0x00000000, 0x00000001 } but 'ldi.d wd, 1' can. |
| |
| BuildVectorSDNode *BVN = cast<BuildVectorSDNode>(Node); |
| APInt SplatValue, SplatUndef; |
| unsigned SplatBitSize; |
| bool HasAnyUndefs; |
| unsigned LdiOp; |
| EVT ResVecTy = BVN->getValueType(0); |
| EVT ViaVecTy; |
| |
| if (!Subtarget->hasMSA() || !BVN->getValueType(0).is128BitVector()) |
| return std::make_pair(false, nullptr); |
| |
| if (!BVN->isConstantSplat(SplatValue, SplatUndef, SplatBitSize, |
| HasAnyUndefs, 8, |
| !Subtarget->isLittle())) |
| return std::make_pair(false, nullptr); |
| |
| switch (SplatBitSize) { |
| default: |
| return std::make_pair(false, nullptr); |
| case 8: |
| LdiOp = Mips::LDI_B; |
| ViaVecTy = MVT::v16i8; |
| break; |
| case 16: |
| LdiOp = Mips::LDI_H; |
| ViaVecTy = MVT::v8i16; |
| break; |
| case 32: |
| LdiOp = Mips::LDI_W; |
| ViaVecTy = MVT::v4i32; |
| break; |
| case 64: |
| LdiOp = Mips::LDI_D; |
| ViaVecTy = MVT::v2i64; |
| break; |
| } |
| |
| if (!SplatValue.isSignedIntN(10)) |
| return std::make_pair(false, nullptr); |
| |
| SDValue Imm = CurDAG->getTargetConstant(SplatValue, |
| ViaVecTy.getVectorElementType()); |
| |
| SDNode *Res = CurDAG->getMachineNode(LdiOp, SDLoc(Node), ViaVecTy, Imm); |
| |
| if (ResVecTy != ViaVecTy) { |
| // If LdiOp is writing to a different register class to ResVecTy, then |
| // fix it up here. This COPY_TO_REGCLASS should never cause a move.v |
| // since the source and destination register sets contain the same |
| // registers. |
| const TargetLowering *TLI = getTargetLowering(); |
| MVT ResVecTySimple = ResVecTy.getSimpleVT(); |
| const TargetRegisterClass *RC = TLI->getRegClassFor(ResVecTySimple); |
| Res = CurDAG->getMachineNode(Mips::COPY_TO_REGCLASS, SDLoc(Node), |
| ResVecTy, SDValue(Res, 0), |
| CurDAG->getTargetConstant(RC->getID(), |
| MVT::i32)); |
| } |
| |
| return std::make_pair(true, Res); |
| } |
| |
| } |
| |
| return std::make_pair(false, nullptr); |
| } |
| |
| FunctionPass *llvm::createMipsSEISelDag(MipsTargetMachine &TM) { |
| return new MipsSEDAGToDAGISel(TM); |
| } |