blob: 8a8ca32822ba4ee800c076ebef798477ce25df5b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/char/pcmcia/synclink_cs.c
3 *
Paul Fulghuma7482a22005-09-10 00:26:07 -07004 * $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $
Linus Torvalds1da177e2005-04-16 15:20:36 -07005 *
6 * Device driver for Microgate SyncLink PC Card
7 * multiprotocol serial adapter.
8 *
9 * written by Paul Fulghum for Microgate Corporation
10 * paulkf@microgate.com
11 *
12 * Microgate and SyncLink are trademarks of Microgate Corporation
13 *
14 * This code is released under the GNU General Public License (GPL)
15 *
16 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
19 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
20 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
21 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
22 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
24 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
26 * OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
30#if defined(__i386__)
31# define BREAKPOINT() asm(" int $3");
32#else
33# define BREAKPOINT() { }
34#endif
35
36#define MAX_DEVICE_COUNT 4
37
38#include <linux/config.h>
39#include <linux/module.h>
40#include <linux/errno.h>
41#include <linux/signal.h>
42#include <linux/sched.h>
43#include <linux/timer.h>
44#include <linux/time.h>
45#include <linux/interrupt.h>
46#include <linux/pci.h>
47#include <linux/tty.h>
48#include <linux/tty_flip.h>
49#include <linux/serial.h>
50#include <linux/major.h>
51#include <linux/string.h>
52#include <linux/fcntl.h>
53#include <linux/ptrace.h>
54#include <linux/ioport.h>
55#include <linux/mm.h>
56#include <linux/slab.h>
57#include <linux/netdevice.h>
58#include <linux/vmalloc.h>
59#include <linux/init.h>
60#include <asm/serial.h>
61#include <linux/delay.h>
62#include <linux/ioctl.h>
63
64#include <asm/system.h>
65#include <asm/io.h>
66#include <asm/irq.h>
67#include <asm/dma.h>
68#include <linux/bitops.h>
69#include <asm/types.h>
70#include <linux/termios.h>
71#include <linux/workqueue.h>
72#include <linux/hdlc.h>
73
Linus Torvalds1da177e2005-04-16 15:20:36 -070074#include <pcmcia/cs_types.h>
75#include <pcmcia/cs.h>
76#include <pcmcia/cistpl.h>
77#include <pcmcia/cisreg.h>
78#include <pcmcia/ds.h>
79
80#ifdef CONFIG_HDLC_MODULE
81#define CONFIG_HDLC 1
82#endif
83
84#define GET_USER(error,value,addr) error = get_user(value,addr)
85#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
86#define PUT_USER(error,value,addr) error = put_user(value,addr)
87#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
88
89#include <asm/uaccess.h>
90
91#include "linux/synclink.h"
92
93static MGSL_PARAMS default_params = {
94 MGSL_MODE_HDLC, /* unsigned long mode */
95 0, /* unsigned char loopback; */
96 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
97 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
98 0, /* unsigned long clock_speed; */
99 0xff, /* unsigned char addr_filter; */
100 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
101 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
102 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
103 9600, /* unsigned long data_rate; */
104 8, /* unsigned char data_bits; */
105 1, /* unsigned char stop_bits; */
106 ASYNC_PARITY_NONE /* unsigned char parity; */
107};
108
109typedef struct
110{
111 int count;
112 unsigned char status;
113 char data[1];
114} RXBUF;
115
116/* The queue of BH actions to be performed */
117
118#define BH_RECEIVE 1
119#define BH_TRANSMIT 2
120#define BH_STATUS 4
121
122#define IO_PIN_SHUTDOWN_LIMIT 100
123
124#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
125
126struct _input_signal_events {
127 int ri_up;
128 int ri_down;
129 int dsr_up;
130 int dsr_down;
131 int dcd_up;
132 int dcd_down;
133 int cts_up;
134 int cts_down;
135};
136
137
138/*
139 * Device instance data structure
140 */
141
142typedef struct _mgslpc_info {
143 void *if_ptr; /* General purpose pointer (used by SPPP) */
144 int magic;
145 int flags;
146 int count; /* count of opens */
147 int line;
148 unsigned short close_delay;
149 unsigned short closing_wait; /* time to wait before closing */
150
151 struct mgsl_icount icount;
152
153 struct tty_struct *tty;
154 int timeout;
155 int x_char; /* xon/xoff character */
156 int blocked_open; /* # of blocked opens */
157 unsigned char read_status_mask;
158 unsigned char ignore_status_mask;
159
160 unsigned char *tx_buf;
161 int tx_put;
162 int tx_get;
163 int tx_count;
164
165 /* circular list of fixed length rx buffers */
166
167 unsigned char *rx_buf; /* memory allocated for all rx buffers */
168 int rx_buf_total_size; /* size of memory allocated for rx buffers */
169 int rx_put; /* index of next empty rx buffer */
170 int rx_get; /* index of next full rx buffer */
171 int rx_buf_size; /* size in bytes of single rx buffer */
172 int rx_buf_count; /* total number of rx buffers */
173 int rx_frame_count; /* number of full rx buffers */
174
175 wait_queue_head_t open_wait;
176 wait_queue_head_t close_wait;
177
178 wait_queue_head_t status_event_wait_q;
179 wait_queue_head_t event_wait_q;
180 struct timer_list tx_timer; /* HDLC transmit timeout timer */
181 struct _mgslpc_info *next_device; /* device list link */
182
183 unsigned short imra_value;
184 unsigned short imrb_value;
185 unsigned char pim_value;
186
187 spinlock_t lock;
188 struct work_struct task; /* task structure for scheduling bh */
189
190 u32 max_frame_size;
191
192 u32 pending_bh;
193
194 int bh_running;
195 int bh_requested;
196
197 int dcd_chkcount; /* check counts to prevent */
198 int cts_chkcount; /* too many IRQs if a signal */
199 int dsr_chkcount; /* is floating */
200 int ri_chkcount;
201
202 int rx_enabled;
203 int rx_overflow;
204
205 int tx_enabled;
206 int tx_active;
207 int tx_aborting;
208 u32 idle_mode;
209
210 int if_mode; /* serial interface selection (RS-232, v.35 etc) */
211
212 char device_name[25]; /* device instance name */
213
214 unsigned int io_base; /* base I/O address of adapter */
215 unsigned int irq_level;
216
217 MGSL_PARAMS params; /* communications parameters */
218
219 unsigned char serial_signals; /* current serial signal states */
220
221 char irq_occurred; /* for diagnostics use */
222 char testing_irq;
223 unsigned int init_error; /* startup error (DIAGS) */
224
225 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
226 BOOLEAN drop_rts_on_tx_done;
227
228 struct _input_signal_events input_signal_events;
229
230 /* PCMCIA support */
231 dev_link_t link;
232 dev_node_t node;
233 int stop;
234
235 /* SPPP/Cisco HDLC device parts */
236 int netcount;
237 int dosyncppp;
238 spinlock_t netlock;
239
240#ifdef CONFIG_HDLC
241 struct net_device *netdev;
242#endif
243
244} MGSLPC_INFO;
245
246#define MGSLPC_MAGIC 0x5402
247
248/*
249 * The size of the serial xmit buffer is 1 page, or 4096 bytes
250 */
251#define TXBUFSIZE 4096
252
253
254#define CHA 0x00 /* channel A offset */
255#define CHB 0x40 /* channel B offset */
256
257/*
258 * FIXME: PPC has PVR defined in asm/reg.h. For now we just undef it.
259 */
260#undef PVR
261
262#define RXFIFO 0
263#define TXFIFO 0
264#define STAR 0x20
265#define CMDR 0x20
266#define RSTA 0x21
267#define PRE 0x21
268#define MODE 0x22
269#define TIMR 0x23
270#define XAD1 0x24
271#define XAD2 0x25
272#define RAH1 0x26
273#define RAH2 0x27
274#define DAFO 0x27
275#define RAL1 0x28
276#define RFC 0x28
277#define RHCR 0x29
278#define RAL2 0x29
279#define RBCL 0x2a
280#define XBCL 0x2a
281#define RBCH 0x2b
282#define XBCH 0x2b
283#define CCR0 0x2c
284#define CCR1 0x2d
285#define CCR2 0x2e
286#define CCR3 0x2f
287#define VSTR 0x34
288#define BGR 0x34
289#define RLCR 0x35
290#define AML 0x36
291#define AMH 0x37
292#define GIS 0x38
293#define IVA 0x38
294#define IPC 0x39
295#define ISR 0x3a
296#define IMR 0x3a
297#define PVR 0x3c
298#define PIS 0x3d
299#define PIM 0x3d
300#define PCR 0x3e
301#define CCR4 0x3f
302
303// IMR/ISR
304
305#define IRQ_BREAK_ON BIT15 // rx break detected
306#define IRQ_DATAOVERRUN BIT14 // receive data overflow
307#define IRQ_ALLSENT BIT13 // all sent
308#define IRQ_UNDERRUN BIT12 // transmit data underrun
309#define IRQ_TIMER BIT11 // timer interrupt
310#define IRQ_CTS BIT10 // CTS status change
311#define IRQ_TXREPEAT BIT9 // tx message repeat
312#define IRQ_TXFIFO BIT8 // transmit pool ready
313#define IRQ_RXEOM BIT7 // receive message end
314#define IRQ_EXITHUNT BIT6 // receive frame start
315#define IRQ_RXTIME BIT6 // rx char timeout
316#define IRQ_DCD BIT2 // carrier detect status change
317#define IRQ_OVERRUN BIT1 // receive frame overflow
318#define IRQ_RXFIFO BIT0 // receive pool full
319
320// STAR
321
322#define XFW BIT6 // transmit FIFO write enable
323#define CEC BIT2 // command executing
324#define CTS BIT1 // CTS state
325
326#define PVR_DTR BIT0
327#define PVR_DSR BIT1
328#define PVR_RI BIT2
329#define PVR_AUTOCTS BIT3
330#define PVR_RS232 0x20 /* 0010b */
331#define PVR_V35 0xe0 /* 1110b */
332#define PVR_RS422 0x40 /* 0100b */
333
334/* Register access functions */
335
336#define write_reg(info, reg, val) outb((val),(info)->io_base + (reg))
337#define read_reg(info, reg) inb((info)->io_base + (reg))
338
339#define read_reg16(info, reg) inw((info)->io_base + (reg))
340#define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg))
341
342#define set_reg_bits(info, reg, mask) \
343 write_reg(info, (reg), \
344 (unsigned char) (read_reg(info, (reg)) | (mask)))
345#define clear_reg_bits(info, reg, mask) \
346 write_reg(info, (reg), \
347 (unsigned char) (read_reg(info, (reg)) & ~(mask)))
348/*
349 * interrupt enable/disable routines
350 */
351static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
352{
353 if (channel == CHA) {
354 info->imra_value |= mask;
355 write_reg16(info, CHA + IMR, info->imra_value);
356 } else {
357 info->imrb_value |= mask;
358 write_reg16(info, CHB + IMR, info->imrb_value);
359 }
360}
361static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
362{
363 if (channel == CHA) {
364 info->imra_value &= ~mask;
365 write_reg16(info, CHA + IMR, info->imra_value);
366 } else {
367 info->imrb_value &= ~mask;
368 write_reg16(info, CHB + IMR, info->imrb_value);
369 }
370}
371
372#define port_irq_disable(info, mask) \
373 { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); }
374
375#define port_irq_enable(info, mask) \
376 { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); }
377
378static void rx_start(MGSLPC_INFO *info);
379static void rx_stop(MGSLPC_INFO *info);
380
381static void tx_start(MGSLPC_INFO *info);
382static void tx_stop(MGSLPC_INFO *info);
383static void tx_set_idle(MGSLPC_INFO *info);
384
385static void get_signals(MGSLPC_INFO *info);
386static void set_signals(MGSLPC_INFO *info);
387
388static void reset_device(MGSLPC_INFO *info);
389
390static void hdlc_mode(MGSLPC_INFO *info);
391static void async_mode(MGSLPC_INFO *info);
392
393static void tx_timeout(unsigned long context);
394
395static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg);
396
397#ifdef CONFIG_HDLC
398#define dev_to_port(D) (dev_to_hdlc(D)->priv)
399static void hdlcdev_tx_done(MGSLPC_INFO *info);
400static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
401static int hdlcdev_init(MGSLPC_INFO *info);
402static void hdlcdev_exit(MGSLPC_INFO *info);
403#endif
404
405static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit);
406
407static BOOLEAN register_test(MGSLPC_INFO *info);
408static BOOLEAN irq_test(MGSLPC_INFO *info);
409static int adapter_test(MGSLPC_INFO *info);
410
411static int claim_resources(MGSLPC_INFO *info);
412static void release_resources(MGSLPC_INFO *info);
413static void mgslpc_add_device(MGSLPC_INFO *info);
414static void mgslpc_remove_device(MGSLPC_INFO *info);
415
416static int rx_get_frame(MGSLPC_INFO *info);
417static void rx_reset_buffers(MGSLPC_INFO *info);
418static int rx_alloc_buffers(MGSLPC_INFO *info);
419static void rx_free_buffers(MGSLPC_INFO *info);
420
421static irqreturn_t mgslpc_isr(int irq, void *dev_id, struct pt_regs * regs);
422
423/*
424 * Bottom half interrupt handlers
425 */
426static void bh_handler(void* Context);
427static void bh_transmit(MGSLPC_INFO *info);
428static void bh_status(MGSLPC_INFO *info);
429
430/*
431 * ioctl handlers
432 */
433static int tiocmget(struct tty_struct *tty, struct file *file);
434static int tiocmset(struct tty_struct *tty, struct file *file,
435 unsigned int set, unsigned int clear);
436static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
437static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
438static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params);
439static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode);
440static int set_txidle(MGSLPC_INFO *info, int idle_mode);
441static int set_txenable(MGSLPC_INFO *info, int enable);
442static int tx_abort(MGSLPC_INFO *info);
443static int set_rxenable(MGSLPC_INFO *info, int enable);
444static int wait_events(MGSLPC_INFO *info, int __user *mask);
445
446static MGSLPC_INFO *mgslpc_device_list = NULL;
447static int mgslpc_device_count = 0;
448
449/*
450 * Set this param to non-zero to load eax with the
451 * .text section address and breakpoint on module load.
452 * This is useful for use with gdb and add-symbol-file command.
453 */
454static int break_on_load=0;
455
456/*
457 * Driver major number, defaults to zero to get auto
458 * assigned major number. May be forced as module parameter.
459 */
460static int ttymajor=0;
461
462static int debug_level = 0;
463static int maxframe[MAX_DEVICE_COUNT] = {0,};
464static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1};
465
466module_param(break_on_load, bool, 0);
467module_param(ttymajor, int, 0);
468module_param(debug_level, int, 0);
469module_param_array(maxframe, int, NULL, 0);
470module_param_array(dosyncppp, int, NULL, 0);
471
472MODULE_LICENSE("GPL");
473
474static char *driver_name = "SyncLink PC Card driver";
Paul Fulghuma7482a22005-09-10 00:26:07 -0700475static char *driver_version = "$Revision: 4.34 $";
Linus Torvalds1da177e2005-04-16 15:20:36 -0700476
477static struct tty_driver *serial_driver;
478
479/* number of characters left in xmit buffer before we ask for more */
480#define WAKEUP_CHARS 256
481
482static void mgslpc_change_params(MGSLPC_INFO *info);
483static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout);
484
485/* PCMCIA prototypes */
486
487static void mgslpc_config(dev_link_t *link);
488static void mgslpc_release(u_long arg);
Dominik Brodowskicc3b4862005-11-14 21:23:14 +0100489static void mgslpc_detach(struct pcmcia_device *p_dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700490
Linus Torvalds1da177e2005-04-16 15:20:36 -0700491/*
492 * 1st function defined in .text section. Calling this function in
493 * init_module() followed by a breakpoint allows a remote debugger
494 * (gdb) to get the .text address for the add-symbol-file command.
495 * This allows remote debugging of dynamically loadable modules.
496 */
497static void* mgslpc_get_text_ptr(void)
498{
499 return mgslpc_get_text_ptr;
500}
501
502/**
503 * line discipline callback wrappers
504 *
505 * The wrappers maintain line discipline references
506 * while calling into the line discipline.
507 *
508 * ldisc_flush_buffer - flush line discipline receive buffers
509 * ldisc_receive_buf - pass receive data to line discipline
510 */
511
512static void ldisc_flush_buffer(struct tty_struct *tty)
513{
514 struct tty_ldisc *ld = tty_ldisc_ref(tty);
515 if (ld) {
516 if (ld->flush_buffer)
517 ld->flush_buffer(tty);
518 tty_ldisc_deref(ld);
519 }
520}
521
522static void ldisc_receive_buf(struct tty_struct *tty,
523 const __u8 *data, char *flags, int count)
524{
525 struct tty_ldisc *ld;
526 if (!tty)
527 return;
528 ld = tty_ldisc_ref(tty);
529 if (ld) {
530 if (ld->receive_buf)
531 ld->receive_buf(tty, data, flags, count);
532 tty_ldisc_deref(ld);
533 }
534}
535
Dominik Brodowskif8cfa612005-11-14 21:25:51 +0100536static int mgslpc_attach(struct pcmcia_device *p_dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537{
538 MGSLPC_INFO *info;
539 dev_link_t *link;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540
541 if (debug_level >= DEBUG_LEVEL_INFO)
542 printk("mgslpc_attach\n");
543
544 info = (MGSLPC_INFO *)kmalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
545 if (!info) {
546 printk("Error can't allocate device instance data\n");
Dominik Brodowskif8cfa612005-11-14 21:25:51 +0100547 return -ENOMEM;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700548 }
549
550 memset(info, 0, sizeof(MGSLPC_INFO));
551 info->magic = MGSLPC_MAGIC;
552 INIT_WORK(&info->task, bh_handler, info);
553 info->max_frame_size = 4096;
554 info->close_delay = 5*HZ/10;
555 info->closing_wait = 30*HZ;
556 init_waitqueue_head(&info->open_wait);
557 init_waitqueue_head(&info->close_wait);
558 init_waitqueue_head(&info->status_event_wait_q);
559 init_waitqueue_head(&info->event_wait_q);
560 spin_lock_init(&info->lock);
561 spin_lock_init(&info->netlock);
562 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
563 info->idle_mode = HDLC_TXIDLE_FLAGS;
564 info->imra_value = 0xffff;
565 info->imrb_value = 0xffff;
566 info->pim_value = 0xff;
567
568 link = &info->link;
569 link->priv = info;
570
571 /* Initialize the dev_link_t structure */
572
573 /* Interrupt setup */
574 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
Dominik Brodowski0c7ab672005-06-27 16:28:56 -0700575 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700576 link->irq.Handler = NULL;
577
578 link->conf.Attributes = 0;
579 link->conf.Vcc = 50;
580 link->conf.IntType = INT_MEMORY_AND_IO;
581
Dominik Brodowskif8cfa612005-11-14 21:25:51 +0100582 link->handle = p_dev;
583 p_dev->instance = link;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700584
Dominik Brodowskif8cfa612005-11-14 21:25:51 +0100585 link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
586 mgslpc_config(link);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700587
588 mgslpc_add_device(info);
589
Dominik Brodowskif8cfa612005-11-14 21:25:51 +0100590 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591}
592
593/* Card has been inserted.
594 */
595
596#define CS_CHECK(fn, ret) \
597do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
598
599static void mgslpc_config(dev_link_t *link)
600{
601 client_handle_t handle = link->handle;
602 MGSLPC_INFO *info = link->priv;
603 tuple_t tuple;
604 cisparse_t parse;
605 int last_fn, last_ret;
606 u_char buf[64];
607 config_info_t conf;
608 cistpl_cftable_entry_t dflt = { 0 };
609 cistpl_cftable_entry_t *cfg;
610
611 if (debug_level >= DEBUG_LEVEL_INFO)
612 printk("mgslpc_config(0x%p)\n", link);
613
614 /* read CONFIG tuple to find its configuration registers */
615 tuple.DesiredTuple = CISTPL_CONFIG;
616 tuple.Attributes = 0;
617 tuple.TupleData = buf;
618 tuple.TupleDataMax = sizeof(buf);
619 tuple.TupleOffset = 0;
620 CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
621 CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
622 CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
623 link->conf.ConfigBase = parse.config.base;
624 link->conf.Present = parse.config.rmask[0];
625
626 /* Configure card */
627 link->state |= DEV_CONFIG;
628
629 /* Look up the current Vcc */
630 CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
631 link->conf.Vcc = conf.Vcc;
632
633 /* get CIS configuration entry */
634
635 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
636 CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
637
638 cfg = &(parse.cftable_entry);
639 CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
640 CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
641
642 if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
643 if (cfg->index == 0)
644 goto cs_failed;
645
646 link->conf.ConfigIndex = cfg->index;
647 link->conf.Attributes |= CONF_ENABLE_IRQ;
648
649 /* IO window settings */
650 link->io.NumPorts1 = 0;
651 if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
652 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
653 link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
654 if (!(io->flags & CISTPL_IO_8BIT))
655 link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
656 if (!(io->flags & CISTPL_IO_16BIT))
657 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
658 link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
659 link->io.BasePort1 = io->win[0].base;
660 link->io.NumPorts1 = io->win[0].len;
661 CS_CHECK(RequestIO, pcmcia_request_io(link->handle, &link->io));
662 }
663
664 link->conf.Attributes = CONF_ENABLE_IRQ;
665 link->conf.Vcc = 50;
666 link->conf.IntType = INT_MEMORY_AND_IO;
667 link->conf.ConfigIndex = 8;
668 link->conf.Present = PRESENT_OPTION;
669
670 link->irq.Attributes |= IRQ_HANDLE_PRESENT;
671 link->irq.Handler = mgslpc_isr;
672 link->irq.Instance = info;
673 CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
674
675 CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
676
677 info->io_base = link->io.BasePort1;
678 info->irq_level = link->irq.AssignedIRQ;
679
680 /* add to linked list of devices */
681 sprintf(info->node.dev_name, "mgslpc0");
682 info->node.major = info->node.minor = 0;
683 link->dev = &info->node;
684
685 printk(KERN_INFO "%s: index 0x%02x:",
686 info->node.dev_name, link->conf.ConfigIndex);
687 if (link->conf.Attributes & CONF_ENABLE_IRQ)
688 printk(", irq %d", link->irq.AssignedIRQ);
689 if (link->io.NumPorts1)
690 printk(", io 0x%04x-0x%04x", link->io.BasePort1,
691 link->io.BasePort1+link->io.NumPorts1-1);
692 printk("\n");
693
694 link->state &= ~DEV_CONFIG_PENDING;
695 return;
696
697cs_failed:
698 cs_error(link->handle, last_fn, last_ret);
699 mgslpc_release((u_long)link);
700}
701
702/* Card has been removed.
703 * Unregister device and release PCMCIA configuration.
704 * If device is open, postpone until it is closed.
705 */
706static void mgslpc_release(u_long arg)
707{
708 dev_link_t *link = (dev_link_t *)arg;
709
710 if (debug_level >= DEBUG_LEVEL_INFO)
711 printk("mgslpc_release(0x%p)\n", link);
712
713 /* Unlink the device chain */
714 link->dev = NULL;
715 link->state &= ~DEV_CONFIG;
716
717 pcmcia_release_configuration(link->handle);
718 if (link->io.NumPorts1)
719 pcmcia_release_io(link->handle, &link->io);
720 if (link->irq.AssignedIRQ)
721 pcmcia_release_irq(link->handle, &link->irq);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700722}
723
Dominik Brodowskicc3b4862005-11-14 21:23:14 +0100724static void mgslpc_detach(struct pcmcia_device *p_dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700725{
Dominik Brodowskicc3b4862005-11-14 21:23:14 +0100726 dev_link_t *link = dev_to_instance(p_dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700727
728 if (debug_level >= DEBUG_LEVEL_INFO)
729 printk("mgslpc_detach(0x%p)\n", link);
Dominik Brodowskicc3b4862005-11-14 21:23:14 +0100730
Linus Torvalds1da177e2005-04-16 15:20:36 -0700731 if (link->state & DEV_CONFIG) {
Dominik Brodowskicc3b4862005-11-14 21:23:14 +0100732 ((MGSLPC_INFO *)link->priv)->stop = 1;
733 mgslpc_release((u_long)link);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700734 }
735
Linus Torvalds1da177e2005-04-16 15:20:36 -0700736 mgslpc_remove_device((MGSLPC_INFO *)link->priv);
737}
738
Dominik Brodowski98e4c282005-11-14 21:21:18 +0100739static int mgslpc_suspend(struct pcmcia_device *dev)
740{
741 dev_link_t *link = dev_to_instance(dev);
742 MGSLPC_INFO *info = link->priv;
743
744 link->state |= DEV_SUSPEND;
745 info->stop = 1;
746 if (link->state & DEV_CONFIG)
747 pcmcia_release_configuration(link->handle);
748
749 return 0;
750}
751
752static int mgslpc_resume(struct pcmcia_device *dev)
753{
754 dev_link_t *link = dev_to_instance(dev);
755 MGSLPC_INFO *info = link->priv;
756
757 link->state &= ~DEV_SUSPEND;
758 if (link->state & DEV_CONFIG)
759 pcmcia_request_configuration(link->handle, &link->conf);
760 info->stop = 0;
761
762 return 0;
763}
764
765
Linus Torvalds1da177e2005-04-16 15:20:36 -0700766static inline int mgslpc_paranoia_check(MGSLPC_INFO *info,
767 char *name, const char *routine)
768{
769#ifdef MGSLPC_PARANOIA_CHECK
770 static const char *badmagic =
771 "Warning: bad magic number for mgsl struct (%s) in %s\n";
772 static const char *badinfo =
773 "Warning: null mgslpc_info for (%s) in %s\n";
774
775 if (!info) {
776 printk(badinfo, name, routine);
777 return 1;
778 }
779 if (info->magic != MGSLPC_MAGIC) {
780 printk(badmagic, name, routine);
781 return 1;
782 }
783#else
784 if (!info)
785 return 1;
786#endif
787 return 0;
788}
789
790
791#define CMD_RXFIFO BIT7 // release current rx FIFO
792#define CMD_RXRESET BIT6 // receiver reset
793#define CMD_RXFIFO_READ BIT5
794#define CMD_START_TIMER BIT4
795#define CMD_TXFIFO BIT3 // release current tx FIFO
796#define CMD_TXEOM BIT1 // transmit end message
797#define CMD_TXRESET BIT0 // transmit reset
798
799static BOOLEAN wait_command_complete(MGSLPC_INFO *info, unsigned char channel)
800{
801 int i = 0;
802 /* wait for command completion */
803 while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) {
804 udelay(1);
805 if (i++ == 1000)
806 return FALSE;
807 }
808 return TRUE;
809}
810
811static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd)
812{
813 wait_command_complete(info, channel);
814 write_reg(info, (unsigned char) (channel + CMDR), cmd);
815}
816
817static void tx_pause(struct tty_struct *tty)
818{
819 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
820 unsigned long flags;
821
822 if (mgslpc_paranoia_check(info, tty->name, "tx_pause"))
823 return;
824 if (debug_level >= DEBUG_LEVEL_INFO)
825 printk("tx_pause(%s)\n",info->device_name);
826
827 spin_lock_irqsave(&info->lock,flags);
828 if (info->tx_enabled)
829 tx_stop(info);
830 spin_unlock_irqrestore(&info->lock,flags);
831}
832
833static void tx_release(struct tty_struct *tty)
834{
835 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
836 unsigned long flags;
837
838 if (mgslpc_paranoia_check(info, tty->name, "tx_release"))
839 return;
840 if (debug_level >= DEBUG_LEVEL_INFO)
841 printk("tx_release(%s)\n",info->device_name);
842
843 spin_lock_irqsave(&info->lock,flags);
844 if (!info->tx_enabled)
845 tx_start(info);
846 spin_unlock_irqrestore(&info->lock,flags);
847}
848
849/* Return next bottom half action to perform.
850 * or 0 if nothing to do.
851 */
852static int bh_action(MGSLPC_INFO *info)
853{
854 unsigned long flags;
855 int rc = 0;
856
857 spin_lock_irqsave(&info->lock,flags);
858
859 if (info->pending_bh & BH_RECEIVE) {
860 info->pending_bh &= ~BH_RECEIVE;
861 rc = BH_RECEIVE;
862 } else if (info->pending_bh & BH_TRANSMIT) {
863 info->pending_bh &= ~BH_TRANSMIT;
864 rc = BH_TRANSMIT;
865 } else if (info->pending_bh & BH_STATUS) {
866 info->pending_bh &= ~BH_STATUS;
867 rc = BH_STATUS;
868 }
869
870 if (!rc) {
871 /* Mark BH routine as complete */
872 info->bh_running = 0;
873 info->bh_requested = 0;
874 }
875
876 spin_unlock_irqrestore(&info->lock,flags);
877
878 return rc;
879}
880
881void bh_handler(void* Context)
882{
883 MGSLPC_INFO *info = (MGSLPC_INFO*)Context;
884 int action;
885
886 if (!info)
887 return;
888
889 if (debug_level >= DEBUG_LEVEL_BH)
890 printk( "%s(%d):bh_handler(%s) entry\n",
891 __FILE__,__LINE__,info->device_name);
892
893 info->bh_running = 1;
894
895 while((action = bh_action(info)) != 0) {
896
897 /* Process work item */
898 if ( debug_level >= DEBUG_LEVEL_BH )
899 printk( "%s(%d):bh_handler() work item action=%d\n",
900 __FILE__,__LINE__,action);
901
902 switch (action) {
903
904 case BH_RECEIVE:
905 while(rx_get_frame(info));
906 break;
907 case BH_TRANSMIT:
908 bh_transmit(info);
909 break;
910 case BH_STATUS:
911 bh_status(info);
912 break;
913 default:
914 /* unknown work item ID */
915 printk("Unknown work item ID=%08X!\n", action);
916 break;
917 }
918 }
919
920 if (debug_level >= DEBUG_LEVEL_BH)
921 printk( "%s(%d):bh_handler(%s) exit\n",
922 __FILE__,__LINE__,info->device_name);
923}
924
925void bh_transmit(MGSLPC_INFO *info)
926{
927 struct tty_struct *tty = info->tty;
928 if (debug_level >= DEBUG_LEVEL_BH)
929 printk("bh_transmit() entry on %s\n", info->device_name);
930
931 if (tty) {
932 tty_wakeup(tty);
933 wake_up_interruptible(&tty->write_wait);
934 }
935}
936
937void bh_status(MGSLPC_INFO *info)
938{
939 info->ri_chkcount = 0;
940 info->dsr_chkcount = 0;
941 info->dcd_chkcount = 0;
942 info->cts_chkcount = 0;
943}
944
945/* eom: non-zero = end of frame */
946static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
947{
948 unsigned char data[2];
949 unsigned char fifo_count, read_count, i;
950 RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size));
951
952 if (debug_level >= DEBUG_LEVEL_ISR)
953 printk("%s(%d):rx_ready_hdlc(eom=%d)\n",__FILE__,__LINE__,eom);
954
955 if (!info->rx_enabled)
956 return;
957
958 if (info->rx_frame_count >= info->rx_buf_count) {
959 /* no more free buffers */
960 issue_command(info, CHA, CMD_RXRESET);
961 info->pending_bh |= BH_RECEIVE;
962 info->rx_overflow = 1;
963 info->icount.buf_overrun++;
964 return;
965 }
966
967 if (eom) {
968 /* end of frame, get FIFO count from RBCL register */
969 if (!(fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f)))
970 fifo_count = 32;
971 } else
972 fifo_count = 32;
973
974 do {
975 if (fifo_count == 1) {
976 read_count = 1;
977 data[0] = read_reg(info, CHA + RXFIFO);
978 } else {
979 read_count = 2;
980 *((unsigned short *) data) = read_reg16(info, CHA + RXFIFO);
981 }
982 fifo_count -= read_count;
983 if (!fifo_count && eom)
984 buf->status = data[--read_count];
985
986 for (i = 0; i < read_count; i++) {
987 if (buf->count >= info->max_frame_size) {
988 /* frame too large, reset receiver and reset current buffer */
989 issue_command(info, CHA, CMD_RXRESET);
990 buf->count = 0;
991 return;
992 }
993 *(buf->data + buf->count) = data[i];
994 buf->count++;
995 }
996 } while (fifo_count);
997
998 if (eom) {
999 info->pending_bh |= BH_RECEIVE;
1000 info->rx_frame_count++;
1001 info->rx_put++;
1002 if (info->rx_put >= info->rx_buf_count)
1003 info->rx_put = 0;
1004 }
1005 issue_command(info, CHA, CMD_RXFIFO);
1006}
1007
1008static void rx_ready_async(MGSLPC_INFO *info, int tcd)
1009{
Alan Cox33f0f882006-01-09 20:54:13 -08001010 unsigned char data, status, flag;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001011 int fifo_count;
Alan Cox33f0f882006-01-09 20:54:13 -08001012 int work = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001013 struct tty_struct *tty = info->tty;
1014 struct mgsl_icount *icount = &info->icount;
1015
1016 if (tcd) {
1017 /* early termination, get FIFO count from RBCL register */
1018 fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
1019
1020 /* Zero fifo count could mean 0 or 32 bytes available.
1021 * If BIT5 of STAR is set then at least 1 byte is available.
1022 */
1023 if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5))
1024 fifo_count = 32;
1025 } else
1026 fifo_count = 32;
Alan Cox33f0f882006-01-09 20:54:13 -08001027
1028 tty_buffer_request_room(tty, fifo_count);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001029 /* Flush received async data to receive data buffer. */
1030 while (fifo_count) {
1031 data = read_reg(info, CHA + RXFIFO);
1032 status = read_reg(info, CHA + RXFIFO);
1033 fifo_count -= 2;
1034
Linus Torvalds1da177e2005-04-16 15:20:36 -07001035 icount->rx++;
Alan Cox33f0f882006-01-09 20:54:13 -08001036 flag = TTY_NORMAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001037
1038 // if no frameing/crc error then save data
1039 // BIT7:parity error
1040 // BIT6:framing error
1041
1042 if (status & (BIT7 + BIT6)) {
1043 if (status & BIT7)
1044 icount->parity++;
1045 else
1046 icount->frame++;
1047
1048 /* discard char if tty control flags say so */
1049 if (status & info->ignore_status_mask)
1050 continue;
1051
1052 status &= info->read_status_mask;
1053
1054 if (status & BIT7)
Alan Cox33f0f882006-01-09 20:54:13 -08001055 flag = TTY_PARITY;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001056 else if (status & BIT6)
Alan Cox33f0f882006-01-09 20:54:13 -08001057 flag = TTY_FRAME;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001058 }
Alan Cox33f0f882006-01-09 20:54:13 -08001059 work += tty_insert_flip_char(tty, data, flag);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001060 }
1061 issue_command(info, CHA, CMD_RXFIFO);
1062
1063 if (debug_level >= DEBUG_LEVEL_ISR) {
Alan Cox33f0f882006-01-09 20:54:13 -08001064 printk("%s(%d):rx_ready_async",
1065 __FILE__,__LINE__);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001066 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
1067 __FILE__,__LINE__,icount->rx,icount->brk,
1068 icount->parity,icount->frame,icount->overrun);
1069 }
1070
Alan Cox33f0f882006-01-09 20:54:13 -08001071 if (work)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001072 tty_flip_buffer_push(tty);
1073}
1074
1075
1076static void tx_done(MGSLPC_INFO *info)
1077{
1078 if (!info->tx_active)
1079 return;
1080
1081 info->tx_active = 0;
1082 info->tx_aborting = 0;
1083
1084 if (info->params.mode == MGSL_MODE_ASYNC)
1085 return;
1086
1087 info->tx_count = info->tx_put = info->tx_get = 0;
1088 del_timer(&info->tx_timer);
1089
1090 if (info->drop_rts_on_tx_done) {
1091 get_signals(info);
1092 if (info->serial_signals & SerialSignal_RTS) {
1093 info->serial_signals &= ~SerialSignal_RTS;
1094 set_signals(info);
1095 }
1096 info->drop_rts_on_tx_done = 0;
1097 }
1098
1099#ifdef CONFIG_HDLC
1100 if (info->netcount)
1101 hdlcdev_tx_done(info);
1102 else
1103#endif
1104 {
1105 if (info->tty->stopped || info->tty->hw_stopped) {
1106 tx_stop(info);
1107 return;
1108 }
1109 info->pending_bh |= BH_TRANSMIT;
1110 }
1111}
1112
1113static void tx_ready(MGSLPC_INFO *info)
1114{
1115 unsigned char fifo_count = 32;
1116 int c;
1117
1118 if (debug_level >= DEBUG_LEVEL_ISR)
1119 printk("%s(%d):tx_ready(%s)\n", __FILE__,__LINE__,info->device_name);
1120
1121 if (info->params.mode == MGSL_MODE_HDLC) {
1122 if (!info->tx_active)
1123 return;
1124 } else {
1125 if (info->tty->stopped || info->tty->hw_stopped) {
1126 tx_stop(info);
1127 return;
1128 }
1129 if (!info->tx_count)
1130 info->tx_active = 0;
1131 }
1132
1133 if (!info->tx_count)
1134 return;
1135
1136 while (info->tx_count && fifo_count) {
1137 c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get)));
1138
1139 if (c == 1) {
1140 write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get));
1141 } else {
1142 write_reg16(info, CHA + TXFIFO,
1143 *((unsigned short*)(info->tx_buf + info->tx_get)));
1144 }
1145 info->tx_count -= c;
1146 info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1);
1147 fifo_count -= c;
1148 }
1149
1150 if (info->params.mode == MGSL_MODE_ASYNC) {
1151 if (info->tx_count < WAKEUP_CHARS)
1152 info->pending_bh |= BH_TRANSMIT;
1153 issue_command(info, CHA, CMD_TXFIFO);
1154 } else {
1155 if (info->tx_count)
1156 issue_command(info, CHA, CMD_TXFIFO);
1157 else
1158 issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM);
1159 }
1160}
1161
1162static void cts_change(MGSLPC_INFO *info)
1163{
1164 get_signals(info);
1165 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1166 irq_disable(info, CHB, IRQ_CTS);
1167 info->icount.cts++;
1168 if (info->serial_signals & SerialSignal_CTS)
1169 info->input_signal_events.cts_up++;
1170 else
1171 info->input_signal_events.cts_down++;
1172 wake_up_interruptible(&info->status_event_wait_q);
1173 wake_up_interruptible(&info->event_wait_q);
1174
1175 if (info->flags & ASYNC_CTS_FLOW) {
1176 if (info->tty->hw_stopped) {
1177 if (info->serial_signals & SerialSignal_CTS) {
1178 if (debug_level >= DEBUG_LEVEL_ISR)
1179 printk("CTS tx start...");
1180 if (info->tty)
1181 info->tty->hw_stopped = 0;
1182 tx_start(info);
1183 info->pending_bh |= BH_TRANSMIT;
1184 return;
1185 }
1186 } else {
1187 if (!(info->serial_signals & SerialSignal_CTS)) {
1188 if (debug_level >= DEBUG_LEVEL_ISR)
1189 printk("CTS tx stop...");
1190 if (info->tty)
1191 info->tty->hw_stopped = 1;
1192 tx_stop(info);
1193 }
1194 }
1195 }
1196 info->pending_bh |= BH_STATUS;
1197}
1198
1199static void dcd_change(MGSLPC_INFO *info)
1200{
1201 get_signals(info);
1202 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1203 irq_disable(info, CHB, IRQ_DCD);
1204 info->icount.dcd++;
1205 if (info->serial_signals & SerialSignal_DCD) {
1206 info->input_signal_events.dcd_up++;
1207 }
1208 else
1209 info->input_signal_events.dcd_down++;
1210#ifdef CONFIG_HDLC
1211 if (info->netcount)
1212 hdlc_set_carrier(info->serial_signals & SerialSignal_DCD, info->netdev);
1213#endif
1214 wake_up_interruptible(&info->status_event_wait_q);
1215 wake_up_interruptible(&info->event_wait_q);
1216
1217 if (info->flags & ASYNC_CHECK_CD) {
1218 if (debug_level >= DEBUG_LEVEL_ISR)
1219 printk("%s CD now %s...", info->device_name,
1220 (info->serial_signals & SerialSignal_DCD) ? "on" : "off");
1221 if (info->serial_signals & SerialSignal_DCD)
1222 wake_up_interruptible(&info->open_wait);
1223 else {
1224 if (debug_level >= DEBUG_LEVEL_ISR)
1225 printk("doing serial hangup...");
1226 if (info->tty)
1227 tty_hangup(info->tty);
1228 }
1229 }
1230 info->pending_bh |= BH_STATUS;
1231}
1232
1233static void dsr_change(MGSLPC_INFO *info)
1234{
1235 get_signals(info);
1236 if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1237 port_irq_disable(info, PVR_DSR);
1238 info->icount.dsr++;
1239 if (info->serial_signals & SerialSignal_DSR)
1240 info->input_signal_events.dsr_up++;
1241 else
1242 info->input_signal_events.dsr_down++;
1243 wake_up_interruptible(&info->status_event_wait_q);
1244 wake_up_interruptible(&info->event_wait_q);
1245 info->pending_bh |= BH_STATUS;
1246}
1247
1248static void ri_change(MGSLPC_INFO *info)
1249{
1250 get_signals(info);
1251 if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1252 port_irq_disable(info, PVR_RI);
1253 info->icount.rng++;
1254 if (info->serial_signals & SerialSignal_RI)
1255 info->input_signal_events.ri_up++;
1256 else
1257 info->input_signal_events.ri_down++;
1258 wake_up_interruptible(&info->status_event_wait_q);
1259 wake_up_interruptible(&info->event_wait_q);
1260 info->pending_bh |= BH_STATUS;
1261}
1262
1263/* Interrupt service routine entry point.
1264 *
1265 * Arguments:
1266 *
1267 * irq interrupt number that caused interrupt
1268 * dev_id device ID supplied during interrupt registration
1269 * regs interrupted processor context
1270 */
1271static irqreturn_t mgslpc_isr(int irq, void *dev_id, struct pt_regs * regs)
1272{
1273 MGSLPC_INFO * info = (MGSLPC_INFO *)dev_id;
1274 unsigned short isr;
1275 unsigned char gis, pis;
1276 int count=0;
1277
1278 if (debug_level >= DEBUG_LEVEL_ISR)
1279 printk("mgslpc_isr(%d) entry.\n", irq);
1280 if (!info)
1281 return IRQ_NONE;
1282
1283 if (!(info->link.state & DEV_CONFIG))
1284 return IRQ_HANDLED;
1285
1286 spin_lock(&info->lock);
1287
1288 while ((gis = read_reg(info, CHA + GIS))) {
1289 if (debug_level >= DEBUG_LEVEL_ISR)
1290 printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis);
1291
1292 if ((gis & 0x70) || count > 1000) {
1293 printk("synclink_cs:hardware failed or ejected\n");
1294 break;
1295 }
1296 count++;
1297
1298 if (gis & (BIT1 + BIT0)) {
1299 isr = read_reg16(info, CHB + ISR);
1300 if (isr & IRQ_DCD)
1301 dcd_change(info);
1302 if (isr & IRQ_CTS)
1303 cts_change(info);
1304 }
1305 if (gis & (BIT3 + BIT2))
1306 {
1307 isr = read_reg16(info, CHA + ISR);
1308 if (isr & IRQ_TIMER) {
1309 info->irq_occurred = 1;
1310 irq_disable(info, CHA, IRQ_TIMER);
1311 }
1312
1313 /* receive IRQs */
1314 if (isr & IRQ_EXITHUNT) {
1315 info->icount.exithunt++;
1316 wake_up_interruptible(&info->event_wait_q);
1317 }
1318 if (isr & IRQ_BREAK_ON) {
1319 info->icount.brk++;
1320 if (info->flags & ASYNC_SAK)
1321 do_SAK(info->tty);
1322 }
1323 if (isr & IRQ_RXTIME) {
1324 issue_command(info, CHA, CMD_RXFIFO_READ);
1325 }
1326 if (isr & (IRQ_RXEOM + IRQ_RXFIFO)) {
1327 if (info->params.mode == MGSL_MODE_HDLC)
1328 rx_ready_hdlc(info, isr & IRQ_RXEOM);
1329 else
1330 rx_ready_async(info, isr & IRQ_RXEOM);
1331 }
1332
1333 /* transmit IRQs */
1334 if (isr & IRQ_UNDERRUN) {
1335 if (info->tx_aborting)
1336 info->icount.txabort++;
1337 else
1338 info->icount.txunder++;
1339 tx_done(info);
1340 }
1341 else if (isr & IRQ_ALLSENT) {
1342 info->icount.txok++;
1343 tx_done(info);
1344 }
1345 else if (isr & IRQ_TXFIFO)
1346 tx_ready(info);
1347 }
1348 if (gis & BIT7) {
1349 pis = read_reg(info, CHA + PIS);
1350 if (pis & BIT1)
1351 dsr_change(info);
1352 if (pis & BIT2)
1353 ri_change(info);
1354 }
1355 }
1356
1357 /* Request bottom half processing if there's something
1358 * for it to do and the bh is not already running
1359 */
1360
1361 if (info->pending_bh && !info->bh_running && !info->bh_requested) {
1362 if ( debug_level >= DEBUG_LEVEL_ISR )
1363 printk("%s(%d):%s queueing bh task.\n",
1364 __FILE__,__LINE__,info->device_name);
1365 schedule_work(&info->task);
1366 info->bh_requested = 1;
1367 }
1368
1369 spin_unlock(&info->lock);
1370
1371 if (debug_level >= DEBUG_LEVEL_ISR)
1372 printk("%s(%d):mgslpc_isr(%d)exit.\n",
1373 __FILE__,__LINE__,irq);
1374
1375 return IRQ_HANDLED;
1376}
1377
1378/* Initialize and start device.
1379 */
1380static int startup(MGSLPC_INFO * info)
1381{
1382 int retval = 0;
1383
1384 if (debug_level >= DEBUG_LEVEL_INFO)
1385 printk("%s(%d):startup(%s)\n",__FILE__,__LINE__,info->device_name);
1386
1387 if (info->flags & ASYNC_INITIALIZED)
1388 return 0;
1389
1390 if (!info->tx_buf) {
1391 /* allocate a page of memory for a transmit buffer */
1392 info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1393 if (!info->tx_buf) {
1394 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1395 __FILE__,__LINE__,info->device_name);
1396 return -ENOMEM;
1397 }
1398 }
1399
1400 info->pending_bh = 0;
1401
Paul Fulghuma7482a22005-09-10 00:26:07 -07001402 memset(&info->icount, 0, sizeof(info->icount));
1403
Linus Torvalds1da177e2005-04-16 15:20:36 -07001404 init_timer(&info->tx_timer);
1405 info->tx_timer.data = (unsigned long)info;
1406 info->tx_timer.function = tx_timeout;
1407
1408 /* Allocate and claim adapter resources */
1409 retval = claim_resources(info);
1410
1411 /* perform existance check and diagnostics */
1412 if ( !retval )
1413 retval = adapter_test(info);
1414
1415 if ( retval ) {
1416 if (capable(CAP_SYS_ADMIN) && info->tty)
1417 set_bit(TTY_IO_ERROR, &info->tty->flags);
1418 release_resources(info);
1419 return retval;
1420 }
1421
1422 /* program hardware for current parameters */
1423 mgslpc_change_params(info);
1424
1425 if (info->tty)
1426 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1427
1428 info->flags |= ASYNC_INITIALIZED;
1429
1430 return 0;
1431}
1432
1433/* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware
1434 */
1435static void shutdown(MGSLPC_INFO * info)
1436{
1437 unsigned long flags;
1438
1439 if (!(info->flags & ASYNC_INITIALIZED))
1440 return;
1441
1442 if (debug_level >= DEBUG_LEVEL_INFO)
1443 printk("%s(%d):mgslpc_shutdown(%s)\n",
1444 __FILE__,__LINE__, info->device_name );
1445
1446 /* clear status wait queue because status changes */
1447 /* can't happen after shutting down the hardware */
1448 wake_up_interruptible(&info->status_event_wait_q);
1449 wake_up_interruptible(&info->event_wait_q);
1450
1451 del_timer(&info->tx_timer);
1452
1453 if (info->tx_buf) {
1454 free_page((unsigned long) info->tx_buf);
1455 info->tx_buf = NULL;
1456 }
1457
1458 spin_lock_irqsave(&info->lock,flags);
1459
1460 rx_stop(info);
1461 tx_stop(info);
1462
1463 /* TODO:disable interrupts instead of reset to preserve signal states */
1464 reset_device(info);
1465
1466 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
1467 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
1468 set_signals(info);
1469 }
1470
1471 spin_unlock_irqrestore(&info->lock,flags);
1472
1473 release_resources(info);
1474
1475 if (info->tty)
1476 set_bit(TTY_IO_ERROR, &info->tty->flags);
1477
1478 info->flags &= ~ASYNC_INITIALIZED;
1479}
1480
1481static void mgslpc_program_hw(MGSLPC_INFO *info)
1482{
1483 unsigned long flags;
1484
1485 spin_lock_irqsave(&info->lock,flags);
1486
1487 rx_stop(info);
1488 tx_stop(info);
1489 info->tx_count = info->tx_put = info->tx_get = 0;
1490
1491 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
1492 hdlc_mode(info);
1493 else
1494 async_mode(info);
1495
1496 set_signals(info);
1497
1498 info->dcd_chkcount = 0;
1499 info->cts_chkcount = 0;
1500 info->ri_chkcount = 0;
1501 info->dsr_chkcount = 0;
1502
1503 irq_enable(info, CHB, IRQ_DCD | IRQ_CTS);
1504 port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
1505 get_signals(info);
1506
1507 if (info->netcount || info->tty->termios->c_cflag & CREAD)
1508 rx_start(info);
1509
1510 spin_unlock_irqrestore(&info->lock,flags);
1511}
1512
1513/* Reconfigure adapter based on new parameters
1514 */
1515static void mgslpc_change_params(MGSLPC_INFO *info)
1516{
1517 unsigned cflag;
1518 int bits_per_char;
1519
1520 if (!info->tty || !info->tty->termios)
1521 return;
1522
1523 if (debug_level >= DEBUG_LEVEL_INFO)
1524 printk("%s(%d):mgslpc_change_params(%s)\n",
1525 __FILE__,__LINE__, info->device_name );
1526
1527 cflag = info->tty->termios->c_cflag;
1528
1529 /* if B0 rate (hangup) specified then negate DTR and RTS */
1530 /* otherwise assert DTR and RTS */
1531 if (cflag & CBAUD)
1532 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1533 else
1534 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
1535
1536 /* byte size and parity */
1537
1538 switch (cflag & CSIZE) {
1539 case CS5: info->params.data_bits = 5; break;
1540 case CS6: info->params.data_bits = 6; break;
1541 case CS7: info->params.data_bits = 7; break;
1542 case CS8: info->params.data_bits = 8; break;
1543 default: info->params.data_bits = 7; break;
1544 }
1545
1546 if (cflag & CSTOPB)
1547 info->params.stop_bits = 2;
1548 else
1549 info->params.stop_bits = 1;
1550
1551 info->params.parity = ASYNC_PARITY_NONE;
1552 if (cflag & PARENB) {
1553 if (cflag & PARODD)
1554 info->params.parity = ASYNC_PARITY_ODD;
1555 else
1556 info->params.parity = ASYNC_PARITY_EVEN;
1557#ifdef CMSPAR
1558 if (cflag & CMSPAR)
1559 info->params.parity = ASYNC_PARITY_SPACE;
1560#endif
1561 }
1562
1563 /* calculate number of jiffies to transmit a full
1564 * FIFO (32 bytes) at specified data rate
1565 */
1566 bits_per_char = info->params.data_bits +
1567 info->params.stop_bits + 1;
1568
1569 /* if port data rate is set to 460800 or less then
1570 * allow tty settings to override, otherwise keep the
1571 * current data rate.
1572 */
1573 if (info->params.data_rate <= 460800) {
1574 info->params.data_rate = tty_get_baud_rate(info->tty);
1575 }
1576
1577 if ( info->params.data_rate ) {
1578 info->timeout = (32*HZ*bits_per_char) /
1579 info->params.data_rate;
1580 }
1581 info->timeout += HZ/50; /* Add .02 seconds of slop */
1582
1583 if (cflag & CRTSCTS)
1584 info->flags |= ASYNC_CTS_FLOW;
1585 else
1586 info->flags &= ~ASYNC_CTS_FLOW;
1587
1588 if (cflag & CLOCAL)
1589 info->flags &= ~ASYNC_CHECK_CD;
1590 else
1591 info->flags |= ASYNC_CHECK_CD;
1592
1593 /* process tty input control flags */
1594
1595 info->read_status_mask = 0;
1596 if (I_INPCK(info->tty))
1597 info->read_status_mask |= BIT7 | BIT6;
1598 if (I_IGNPAR(info->tty))
1599 info->ignore_status_mask |= BIT7 | BIT6;
1600
1601 mgslpc_program_hw(info);
1602}
1603
1604/* Add a character to the transmit buffer
1605 */
1606static void mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
1607{
1608 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1609 unsigned long flags;
1610
1611 if (debug_level >= DEBUG_LEVEL_INFO) {
1612 printk( "%s(%d):mgslpc_put_char(%d) on %s\n",
1613 __FILE__,__LINE__,ch,info->device_name);
1614 }
1615
1616 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
1617 return;
1618
1619 if (!tty || !info->tx_buf)
1620 return;
1621
1622 spin_lock_irqsave(&info->lock,flags);
1623
1624 if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) {
1625 if (info->tx_count < TXBUFSIZE - 1) {
1626 info->tx_buf[info->tx_put++] = ch;
1627 info->tx_put &= TXBUFSIZE-1;
1628 info->tx_count++;
1629 }
1630 }
1631
1632 spin_unlock_irqrestore(&info->lock,flags);
1633}
1634
1635/* Enable transmitter so remaining characters in the
1636 * transmit buffer are sent.
1637 */
1638static void mgslpc_flush_chars(struct tty_struct *tty)
1639{
1640 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1641 unsigned long flags;
1642
1643 if (debug_level >= DEBUG_LEVEL_INFO)
1644 printk( "%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n",
1645 __FILE__,__LINE__,info->device_name,info->tx_count);
1646
1647 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars"))
1648 return;
1649
1650 if (info->tx_count <= 0 || tty->stopped ||
1651 tty->hw_stopped || !info->tx_buf)
1652 return;
1653
1654 if (debug_level >= DEBUG_LEVEL_INFO)
1655 printk( "%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n",
1656 __FILE__,__LINE__,info->device_name);
1657
1658 spin_lock_irqsave(&info->lock,flags);
1659 if (!info->tx_active)
1660 tx_start(info);
1661 spin_unlock_irqrestore(&info->lock,flags);
1662}
1663
1664/* Send a block of data
1665 *
1666 * Arguments:
1667 *
1668 * tty pointer to tty information structure
1669 * buf pointer to buffer containing send data
1670 * count size of send data in bytes
1671 *
1672 * Returns: number of characters written
1673 */
1674static int mgslpc_write(struct tty_struct * tty,
1675 const unsigned char *buf, int count)
1676{
1677 int c, ret = 0;
1678 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1679 unsigned long flags;
1680
1681 if (debug_level >= DEBUG_LEVEL_INFO)
1682 printk( "%s(%d):mgslpc_write(%s) count=%d\n",
1683 __FILE__,__LINE__,info->device_name,count);
1684
1685 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") ||
1686 !tty || !info->tx_buf)
1687 goto cleanup;
1688
1689 if (info->params.mode == MGSL_MODE_HDLC) {
1690 if (count > TXBUFSIZE) {
1691 ret = -EIO;
1692 goto cleanup;
1693 }
1694 if (info->tx_active)
1695 goto cleanup;
1696 else if (info->tx_count)
1697 goto start;
1698 }
1699
1700 for (;;) {
1701 c = min(count,
1702 min(TXBUFSIZE - info->tx_count - 1,
1703 TXBUFSIZE - info->tx_put));
1704 if (c <= 0)
1705 break;
1706
1707 memcpy(info->tx_buf + info->tx_put, buf, c);
1708
1709 spin_lock_irqsave(&info->lock,flags);
1710 info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1);
1711 info->tx_count += c;
1712 spin_unlock_irqrestore(&info->lock,flags);
1713
1714 buf += c;
1715 count -= c;
1716 ret += c;
1717 }
1718start:
1719 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
1720 spin_lock_irqsave(&info->lock,flags);
1721 if (!info->tx_active)
1722 tx_start(info);
1723 spin_unlock_irqrestore(&info->lock,flags);
1724 }
1725cleanup:
1726 if (debug_level >= DEBUG_LEVEL_INFO)
1727 printk( "%s(%d):mgslpc_write(%s) returning=%d\n",
1728 __FILE__,__LINE__,info->device_name,ret);
1729 return ret;
1730}
1731
1732/* Return the count of free bytes in transmit buffer
1733 */
1734static int mgslpc_write_room(struct tty_struct *tty)
1735{
1736 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1737 int ret;
1738
1739 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room"))
1740 return 0;
1741
1742 if (info->params.mode == MGSL_MODE_HDLC) {
1743 /* HDLC (frame oriented) mode */
1744 if (info->tx_active)
1745 return 0;
1746 else
1747 return HDLC_MAX_FRAME_SIZE;
1748 } else {
1749 ret = TXBUFSIZE - info->tx_count - 1;
1750 if (ret < 0)
1751 ret = 0;
1752 }
1753
1754 if (debug_level >= DEBUG_LEVEL_INFO)
1755 printk("%s(%d):mgslpc_write_room(%s)=%d\n",
1756 __FILE__,__LINE__, info->device_name, ret);
1757 return ret;
1758}
1759
1760/* Return the count of bytes in transmit buffer
1761 */
1762static int mgslpc_chars_in_buffer(struct tty_struct *tty)
1763{
1764 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1765 int rc;
1766
1767 if (debug_level >= DEBUG_LEVEL_INFO)
1768 printk("%s(%d):mgslpc_chars_in_buffer(%s)\n",
1769 __FILE__,__LINE__, info->device_name );
1770
1771 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer"))
1772 return 0;
1773
1774 if (info->params.mode == MGSL_MODE_HDLC)
1775 rc = info->tx_active ? info->max_frame_size : 0;
1776 else
1777 rc = info->tx_count;
1778
1779 if (debug_level >= DEBUG_LEVEL_INFO)
1780 printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n",
1781 __FILE__,__LINE__, info->device_name, rc);
1782
1783 return rc;
1784}
1785
1786/* Discard all data in the send buffer
1787 */
1788static void mgslpc_flush_buffer(struct tty_struct *tty)
1789{
1790 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1791 unsigned long flags;
1792
1793 if (debug_level >= DEBUG_LEVEL_INFO)
1794 printk("%s(%d):mgslpc_flush_buffer(%s) entry\n",
1795 __FILE__,__LINE__, info->device_name );
1796
1797 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer"))
1798 return;
1799
1800 spin_lock_irqsave(&info->lock,flags);
1801 info->tx_count = info->tx_put = info->tx_get = 0;
1802 del_timer(&info->tx_timer);
1803 spin_unlock_irqrestore(&info->lock,flags);
1804
1805 wake_up_interruptible(&tty->write_wait);
1806 tty_wakeup(tty);
1807}
1808
1809/* Send a high-priority XON/XOFF character
1810 */
1811static void mgslpc_send_xchar(struct tty_struct *tty, char ch)
1812{
1813 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1814 unsigned long flags;
1815
1816 if (debug_level >= DEBUG_LEVEL_INFO)
1817 printk("%s(%d):mgslpc_send_xchar(%s,%d)\n",
1818 __FILE__,__LINE__, info->device_name, ch );
1819
1820 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar"))
1821 return;
1822
1823 info->x_char = ch;
1824 if (ch) {
1825 spin_lock_irqsave(&info->lock,flags);
1826 if (!info->tx_enabled)
1827 tx_start(info);
1828 spin_unlock_irqrestore(&info->lock,flags);
1829 }
1830}
1831
1832/* Signal remote device to throttle send data (our receive data)
1833 */
1834static void mgslpc_throttle(struct tty_struct * tty)
1835{
1836 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1837 unsigned long flags;
1838
1839 if (debug_level >= DEBUG_LEVEL_INFO)
1840 printk("%s(%d):mgslpc_throttle(%s) entry\n",
1841 __FILE__,__LINE__, info->device_name );
1842
1843 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle"))
1844 return;
1845
1846 if (I_IXOFF(tty))
1847 mgslpc_send_xchar(tty, STOP_CHAR(tty));
1848
1849 if (tty->termios->c_cflag & CRTSCTS) {
1850 spin_lock_irqsave(&info->lock,flags);
1851 info->serial_signals &= ~SerialSignal_RTS;
1852 set_signals(info);
1853 spin_unlock_irqrestore(&info->lock,flags);
1854 }
1855}
1856
1857/* Signal remote device to stop throttling send data (our receive data)
1858 */
1859static void mgslpc_unthrottle(struct tty_struct * tty)
1860{
1861 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1862 unsigned long flags;
1863
1864 if (debug_level >= DEBUG_LEVEL_INFO)
1865 printk("%s(%d):mgslpc_unthrottle(%s) entry\n",
1866 __FILE__,__LINE__, info->device_name );
1867
1868 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle"))
1869 return;
1870
1871 if (I_IXOFF(tty)) {
1872 if (info->x_char)
1873 info->x_char = 0;
1874 else
1875 mgslpc_send_xchar(tty, START_CHAR(tty));
1876 }
1877
1878 if (tty->termios->c_cflag & CRTSCTS) {
1879 spin_lock_irqsave(&info->lock,flags);
1880 info->serial_signals |= SerialSignal_RTS;
1881 set_signals(info);
1882 spin_unlock_irqrestore(&info->lock,flags);
1883 }
1884}
1885
1886/* get the current serial statistics
1887 */
1888static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount)
1889{
1890 int err;
1891 if (debug_level >= DEBUG_LEVEL_INFO)
1892 printk("get_params(%s)\n", info->device_name);
Paul Fulghuma7482a22005-09-10 00:26:07 -07001893 if (!user_icount) {
1894 memset(&info->icount, 0, sizeof(info->icount));
1895 } else {
1896 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
1897 if (err)
1898 return -EFAULT;
1899 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001900 return 0;
1901}
1902
1903/* get the current serial parameters
1904 */
1905static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params)
1906{
1907 int err;
1908 if (debug_level >= DEBUG_LEVEL_INFO)
1909 printk("get_params(%s)\n", info->device_name);
1910 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
1911 if (err)
1912 return -EFAULT;
1913 return 0;
1914}
1915
1916/* set the serial parameters
1917 *
1918 * Arguments:
1919 *
1920 * info pointer to device instance data
1921 * new_params user buffer containing new serial params
1922 *
1923 * Returns: 0 if success, otherwise error code
1924 */
1925static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params)
1926{
1927 unsigned long flags;
1928 MGSL_PARAMS tmp_params;
1929 int err;
1930
1931 if (debug_level >= DEBUG_LEVEL_INFO)
1932 printk("%s(%d):set_params %s\n", __FILE__,__LINE__,
1933 info->device_name );
1934 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
1935 if (err) {
1936 if ( debug_level >= DEBUG_LEVEL_INFO )
1937 printk( "%s(%d):set_params(%s) user buffer copy failed\n",
1938 __FILE__,__LINE__,info->device_name);
1939 return -EFAULT;
1940 }
1941
1942 spin_lock_irqsave(&info->lock,flags);
1943 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
1944 spin_unlock_irqrestore(&info->lock,flags);
1945
1946 mgslpc_change_params(info);
1947
1948 return 0;
1949}
1950
1951static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode)
1952{
1953 int err;
1954 if (debug_level >= DEBUG_LEVEL_INFO)
1955 printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode);
1956 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
1957 if (err)
1958 return -EFAULT;
1959 return 0;
1960}
1961
1962static int set_txidle(MGSLPC_INFO * info, int idle_mode)
1963{
1964 unsigned long flags;
1965 if (debug_level >= DEBUG_LEVEL_INFO)
1966 printk("set_txidle(%s,%d)\n", info->device_name, idle_mode);
1967 spin_lock_irqsave(&info->lock,flags);
1968 info->idle_mode = idle_mode;
1969 tx_set_idle(info);
1970 spin_unlock_irqrestore(&info->lock,flags);
1971 return 0;
1972}
1973
1974static int get_interface(MGSLPC_INFO * info, int __user *if_mode)
1975{
1976 int err;
1977 if (debug_level >= DEBUG_LEVEL_INFO)
1978 printk("get_interface(%s)=%d\n", info->device_name, info->if_mode);
1979 COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int));
1980 if (err)
1981 return -EFAULT;
1982 return 0;
1983}
1984
1985static int set_interface(MGSLPC_INFO * info, int if_mode)
1986{
1987 unsigned long flags;
1988 unsigned char val;
1989 if (debug_level >= DEBUG_LEVEL_INFO)
1990 printk("set_interface(%s,%d)\n", info->device_name, if_mode);
1991 spin_lock_irqsave(&info->lock,flags);
1992 info->if_mode = if_mode;
1993
1994 val = read_reg(info, PVR) & 0x0f;
1995 switch (info->if_mode)
1996 {
1997 case MGSL_INTERFACE_RS232: val |= PVR_RS232; break;
1998 case MGSL_INTERFACE_V35: val |= PVR_V35; break;
1999 case MGSL_INTERFACE_RS422: val |= PVR_RS422; break;
2000 }
2001 write_reg(info, PVR, val);
2002
2003 spin_unlock_irqrestore(&info->lock,flags);
2004 return 0;
2005}
2006
2007static int set_txenable(MGSLPC_INFO * info, int enable)
2008{
2009 unsigned long flags;
2010
2011 if (debug_level >= DEBUG_LEVEL_INFO)
2012 printk("set_txenable(%s,%d)\n", info->device_name, enable);
2013
2014 spin_lock_irqsave(&info->lock,flags);
2015 if (enable) {
2016 if (!info->tx_enabled)
2017 tx_start(info);
2018 } else {
2019 if (info->tx_enabled)
2020 tx_stop(info);
2021 }
2022 spin_unlock_irqrestore(&info->lock,flags);
2023 return 0;
2024}
2025
2026static int tx_abort(MGSLPC_INFO * info)
2027{
2028 unsigned long flags;
2029
2030 if (debug_level >= DEBUG_LEVEL_INFO)
2031 printk("tx_abort(%s)\n", info->device_name);
2032
2033 spin_lock_irqsave(&info->lock,flags);
2034 if (info->tx_active && info->tx_count &&
2035 info->params.mode == MGSL_MODE_HDLC) {
2036 /* clear data count so FIFO is not filled on next IRQ.
2037 * This results in underrun and abort transmission.
2038 */
2039 info->tx_count = info->tx_put = info->tx_get = 0;
2040 info->tx_aborting = TRUE;
2041 }
2042 spin_unlock_irqrestore(&info->lock,flags);
2043 return 0;
2044}
2045
2046static int set_rxenable(MGSLPC_INFO * info, int enable)
2047{
2048 unsigned long flags;
2049
2050 if (debug_level >= DEBUG_LEVEL_INFO)
2051 printk("set_rxenable(%s,%d)\n", info->device_name, enable);
2052
2053 spin_lock_irqsave(&info->lock,flags);
2054 if (enable) {
2055 if (!info->rx_enabled)
2056 rx_start(info);
2057 } else {
2058 if (info->rx_enabled)
2059 rx_stop(info);
2060 }
2061 spin_unlock_irqrestore(&info->lock,flags);
2062 return 0;
2063}
2064
2065/* wait for specified event to occur
2066 *
2067 * Arguments: info pointer to device instance data
2068 * mask pointer to bitmask of events to wait for
2069 * Return Value: 0 if successful and bit mask updated with
2070 * of events triggerred,
2071 * otherwise error code
2072 */
2073static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr)
2074{
2075 unsigned long flags;
2076 int s;
2077 int rc=0;
2078 struct mgsl_icount cprev, cnow;
2079 int events;
2080 int mask;
2081 struct _input_signal_events oldsigs, newsigs;
2082 DECLARE_WAITQUEUE(wait, current);
2083
2084 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
2085 if (rc)
2086 return -EFAULT;
2087
2088 if (debug_level >= DEBUG_LEVEL_INFO)
2089 printk("wait_events(%s,%d)\n", info->device_name, mask);
2090
2091 spin_lock_irqsave(&info->lock,flags);
2092
2093 /* return immediately if state matches requested events */
2094 get_signals(info);
2095 s = info->serial_signals;
2096 events = mask &
2097 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2098 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2099 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2100 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2101 if (events) {
2102 spin_unlock_irqrestore(&info->lock,flags);
2103 goto exit;
2104 }
2105
2106 /* save current irq counts */
2107 cprev = info->icount;
2108 oldsigs = info->input_signal_events;
2109
2110 if ((info->params.mode == MGSL_MODE_HDLC) &&
2111 (mask & MgslEvent_ExitHuntMode))
2112 irq_enable(info, CHA, IRQ_EXITHUNT);
2113
2114 set_current_state(TASK_INTERRUPTIBLE);
2115 add_wait_queue(&info->event_wait_q, &wait);
2116
2117 spin_unlock_irqrestore(&info->lock,flags);
2118
2119
2120 for(;;) {
2121 schedule();
2122 if (signal_pending(current)) {
2123 rc = -ERESTARTSYS;
2124 break;
2125 }
2126
2127 /* get current irq counts */
2128 spin_lock_irqsave(&info->lock,flags);
2129 cnow = info->icount;
2130 newsigs = info->input_signal_events;
2131 set_current_state(TASK_INTERRUPTIBLE);
2132 spin_unlock_irqrestore(&info->lock,flags);
2133
2134 /* if no change, wait aborted for some reason */
2135 if (newsigs.dsr_up == oldsigs.dsr_up &&
2136 newsigs.dsr_down == oldsigs.dsr_down &&
2137 newsigs.dcd_up == oldsigs.dcd_up &&
2138 newsigs.dcd_down == oldsigs.dcd_down &&
2139 newsigs.cts_up == oldsigs.cts_up &&
2140 newsigs.cts_down == oldsigs.cts_down &&
2141 newsigs.ri_up == oldsigs.ri_up &&
2142 newsigs.ri_down == oldsigs.ri_down &&
2143 cnow.exithunt == cprev.exithunt &&
2144 cnow.rxidle == cprev.rxidle) {
2145 rc = -EIO;
2146 break;
2147 }
2148
2149 events = mask &
2150 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2151 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2152 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2153 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2154 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2155 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2156 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2157 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2158 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2159 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2160 if (events)
2161 break;
2162
2163 cprev = cnow;
2164 oldsigs = newsigs;
2165 }
2166
2167 remove_wait_queue(&info->event_wait_q, &wait);
2168 set_current_state(TASK_RUNNING);
2169
2170 if (mask & MgslEvent_ExitHuntMode) {
2171 spin_lock_irqsave(&info->lock,flags);
2172 if (!waitqueue_active(&info->event_wait_q))
2173 irq_disable(info, CHA, IRQ_EXITHUNT);
2174 spin_unlock_irqrestore(&info->lock,flags);
2175 }
2176exit:
2177 if (rc == 0)
2178 PUT_USER(rc, events, mask_ptr);
2179 return rc;
2180}
2181
2182static int modem_input_wait(MGSLPC_INFO *info,int arg)
2183{
2184 unsigned long flags;
2185 int rc;
2186 struct mgsl_icount cprev, cnow;
2187 DECLARE_WAITQUEUE(wait, current);
2188
2189 /* save current irq counts */
2190 spin_lock_irqsave(&info->lock,flags);
2191 cprev = info->icount;
2192 add_wait_queue(&info->status_event_wait_q, &wait);
2193 set_current_state(TASK_INTERRUPTIBLE);
2194 spin_unlock_irqrestore(&info->lock,flags);
2195
2196 for(;;) {
2197 schedule();
2198 if (signal_pending(current)) {
2199 rc = -ERESTARTSYS;
2200 break;
2201 }
2202
2203 /* get new irq counts */
2204 spin_lock_irqsave(&info->lock,flags);
2205 cnow = info->icount;
2206 set_current_state(TASK_INTERRUPTIBLE);
2207 spin_unlock_irqrestore(&info->lock,flags);
2208
2209 /* if no change, wait aborted for some reason */
2210 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2211 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2212 rc = -EIO;
2213 break;
2214 }
2215
2216 /* check for change in caller specified modem input */
2217 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2218 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2219 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2220 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2221 rc = 0;
2222 break;
2223 }
2224
2225 cprev = cnow;
2226 }
2227 remove_wait_queue(&info->status_event_wait_q, &wait);
2228 set_current_state(TASK_RUNNING);
2229 return rc;
2230}
2231
2232/* return the state of the serial control and status signals
2233 */
2234static int tiocmget(struct tty_struct *tty, struct file *file)
2235{
2236 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2237 unsigned int result;
2238 unsigned long flags;
2239
2240 spin_lock_irqsave(&info->lock,flags);
2241 get_signals(info);
2242 spin_unlock_irqrestore(&info->lock,flags);
2243
2244 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2245 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2246 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2247 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2248 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2249 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2250
2251 if (debug_level >= DEBUG_LEVEL_INFO)
2252 printk("%s(%d):%s tiocmget() value=%08X\n",
2253 __FILE__,__LINE__, info->device_name, result );
2254 return result;
2255}
2256
2257/* set modem control signals (DTR/RTS)
2258 */
2259static int tiocmset(struct tty_struct *tty, struct file *file,
2260 unsigned int set, unsigned int clear)
2261{
2262 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2263 unsigned long flags;
2264
2265 if (debug_level >= DEBUG_LEVEL_INFO)
2266 printk("%s(%d):%s tiocmset(%x,%x)\n",
2267 __FILE__,__LINE__,info->device_name, set, clear);
2268
2269 if (set & TIOCM_RTS)
2270 info->serial_signals |= SerialSignal_RTS;
2271 if (set & TIOCM_DTR)
2272 info->serial_signals |= SerialSignal_DTR;
2273 if (clear & TIOCM_RTS)
2274 info->serial_signals &= ~SerialSignal_RTS;
2275 if (clear & TIOCM_DTR)
2276 info->serial_signals &= ~SerialSignal_DTR;
2277
2278 spin_lock_irqsave(&info->lock,flags);
2279 set_signals(info);
2280 spin_unlock_irqrestore(&info->lock,flags);
2281
2282 return 0;
2283}
2284
2285/* Set or clear transmit break condition
2286 *
2287 * Arguments: tty pointer to tty instance data
2288 * break_state -1=set break condition, 0=clear
2289 */
2290static void mgslpc_break(struct tty_struct *tty, int break_state)
2291{
2292 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2293 unsigned long flags;
2294
2295 if (debug_level >= DEBUG_LEVEL_INFO)
2296 printk("%s(%d):mgslpc_break(%s,%d)\n",
2297 __FILE__,__LINE__, info->device_name, break_state);
2298
2299 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
2300 return;
2301
2302 spin_lock_irqsave(&info->lock,flags);
2303 if (break_state == -1)
2304 set_reg_bits(info, CHA+DAFO, BIT6);
2305 else
2306 clear_reg_bits(info, CHA+DAFO, BIT6);
2307 spin_unlock_irqrestore(&info->lock,flags);
2308}
2309
2310/* Service an IOCTL request
2311 *
2312 * Arguments:
2313 *
2314 * tty pointer to tty instance data
2315 * file pointer to associated file object for device
2316 * cmd IOCTL command code
2317 * arg command argument/context
2318 *
2319 * Return Value: 0 if success, otherwise error code
2320 */
2321static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
2322 unsigned int cmd, unsigned long arg)
2323{
2324 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2325
2326 if (debug_level >= DEBUG_LEVEL_INFO)
2327 printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2328 info->device_name, cmd );
2329
2330 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl"))
2331 return -ENODEV;
2332
2333 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2334 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
2335 if (tty->flags & (1 << TTY_IO_ERROR))
2336 return -EIO;
2337 }
2338
2339 return ioctl_common(info, cmd, arg);
2340}
2341
2342int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg)
2343{
2344 int error;
2345 struct mgsl_icount cnow; /* kernel counter temps */
2346 struct serial_icounter_struct __user *p_cuser; /* user space */
2347 void __user *argp = (void __user *)arg;
2348 unsigned long flags;
2349
2350 switch (cmd) {
2351 case MGSL_IOCGPARAMS:
2352 return get_params(info, argp);
2353 case MGSL_IOCSPARAMS:
2354 return set_params(info, argp);
2355 case MGSL_IOCGTXIDLE:
2356 return get_txidle(info, argp);
2357 case MGSL_IOCSTXIDLE:
2358 return set_txidle(info, (int)arg);
2359 case MGSL_IOCGIF:
2360 return get_interface(info, argp);
2361 case MGSL_IOCSIF:
2362 return set_interface(info,(int)arg);
2363 case MGSL_IOCTXENABLE:
2364 return set_txenable(info,(int)arg);
2365 case MGSL_IOCRXENABLE:
2366 return set_rxenable(info,(int)arg);
2367 case MGSL_IOCTXABORT:
2368 return tx_abort(info);
2369 case MGSL_IOCGSTATS:
2370 return get_stats(info, argp);
2371 case MGSL_IOCWAITEVENT:
2372 return wait_events(info, argp);
2373 case TIOCMIWAIT:
2374 return modem_input_wait(info,(int)arg);
2375 case TIOCGICOUNT:
2376 spin_lock_irqsave(&info->lock,flags);
2377 cnow = info->icount;
2378 spin_unlock_irqrestore(&info->lock,flags);
2379 p_cuser = argp;
2380 PUT_USER(error,cnow.cts, &p_cuser->cts);
2381 if (error) return error;
2382 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
2383 if (error) return error;
2384 PUT_USER(error,cnow.rng, &p_cuser->rng);
2385 if (error) return error;
2386 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
2387 if (error) return error;
2388 PUT_USER(error,cnow.rx, &p_cuser->rx);
2389 if (error) return error;
2390 PUT_USER(error,cnow.tx, &p_cuser->tx);
2391 if (error) return error;
2392 PUT_USER(error,cnow.frame, &p_cuser->frame);
2393 if (error) return error;
2394 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
2395 if (error) return error;
2396 PUT_USER(error,cnow.parity, &p_cuser->parity);
2397 if (error) return error;
2398 PUT_USER(error,cnow.brk, &p_cuser->brk);
2399 if (error) return error;
2400 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
2401 if (error) return error;
2402 return 0;
2403 default:
2404 return -ENOIOCTLCMD;
2405 }
2406 return 0;
2407}
2408
2409/* Set new termios settings
2410 *
2411 * Arguments:
2412 *
2413 * tty pointer to tty structure
2414 * termios pointer to buffer to hold returned old termios
2415 */
2416static void mgslpc_set_termios(struct tty_struct *tty, struct termios *old_termios)
2417{
2418 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2419 unsigned long flags;
2420
2421 if (debug_level >= DEBUG_LEVEL_INFO)
2422 printk("%s(%d):mgslpc_set_termios %s\n", __FILE__,__LINE__,
2423 tty->driver->name );
2424
2425 /* just return if nothing has changed */
2426 if ((tty->termios->c_cflag == old_termios->c_cflag)
2427 && (RELEVANT_IFLAG(tty->termios->c_iflag)
2428 == RELEVANT_IFLAG(old_termios->c_iflag)))
2429 return;
2430
2431 mgslpc_change_params(info);
2432
2433 /* Handle transition to B0 status */
2434 if (old_termios->c_cflag & CBAUD &&
2435 !(tty->termios->c_cflag & CBAUD)) {
2436 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2437 spin_lock_irqsave(&info->lock,flags);
2438 set_signals(info);
2439 spin_unlock_irqrestore(&info->lock,flags);
2440 }
2441
2442 /* Handle transition away from B0 status */
2443 if (!(old_termios->c_cflag & CBAUD) &&
2444 tty->termios->c_cflag & CBAUD) {
2445 info->serial_signals |= SerialSignal_DTR;
2446 if (!(tty->termios->c_cflag & CRTSCTS) ||
2447 !test_bit(TTY_THROTTLED, &tty->flags)) {
2448 info->serial_signals |= SerialSignal_RTS;
2449 }
2450 spin_lock_irqsave(&info->lock,flags);
2451 set_signals(info);
2452 spin_unlock_irqrestore(&info->lock,flags);
2453 }
2454
2455 /* Handle turning off CRTSCTS */
2456 if (old_termios->c_cflag & CRTSCTS &&
2457 !(tty->termios->c_cflag & CRTSCTS)) {
2458 tty->hw_stopped = 0;
2459 tx_release(tty);
2460 }
2461}
2462
2463static void mgslpc_close(struct tty_struct *tty, struct file * filp)
2464{
2465 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2466
2467 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
2468 return;
2469
2470 if (debug_level >= DEBUG_LEVEL_INFO)
2471 printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
2472 __FILE__,__LINE__, info->device_name, info->count);
2473
2474 if (!info->count)
2475 return;
2476
2477 if (tty_hung_up_p(filp))
2478 goto cleanup;
2479
2480 if ((tty->count == 1) && (info->count != 1)) {
2481 /*
2482 * tty->count is 1 and the tty structure will be freed.
2483 * info->count should be one in this case.
2484 * if it's not, correct it so that the port is shutdown.
2485 */
2486 printk("mgslpc_close: bad refcount; tty->count is 1, "
2487 "info->count is %d\n", info->count);
2488 info->count = 1;
2489 }
2490
2491 info->count--;
2492
2493 /* if at least one open remaining, leave hardware active */
2494 if (info->count)
2495 goto cleanup;
2496
2497 info->flags |= ASYNC_CLOSING;
2498
2499 /* set tty->closing to notify line discipline to
2500 * only process XON/XOFF characters. Only the N_TTY
2501 * discipline appears to use this (ppp does not).
2502 */
2503 tty->closing = 1;
2504
2505 /* wait for transmit data to clear all layers */
2506
2507 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
2508 if (debug_level >= DEBUG_LEVEL_INFO)
2509 printk("%s(%d):mgslpc_close(%s) calling tty_wait_until_sent\n",
2510 __FILE__,__LINE__, info->device_name );
2511 tty_wait_until_sent(tty, info->closing_wait);
2512 }
2513
2514 if (info->flags & ASYNC_INITIALIZED)
2515 mgslpc_wait_until_sent(tty, info->timeout);
2516
2517 if (tty->driver->flush_buffer)
2518 tty->driver->flush_buffer(tty);
2519
2520 ldisc_flush_buffer(tty);
2521
2522 shutdown(info);
2523
2524 tty->closing = 0;
2525 info->tty = NULL;
2526
2527 if (info->blocked_open) {
2528 if (info->close_delay) {
2529 msleep_interruptible(jiffies_to_msecs(info->close_delay));
2530 }
2531 wake_up_interruptible(&info->open_wait);
2532 }
2533
2534 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
2535
2536 wake_up_interruptible(&info->close_wait);
2537
2538cleanup:
2539 if (debug_level >= DEBUG_LEVEL_INFO)
2540 printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__,__LINE__,
2541 tty->driver->name, info->count);
2542}
2543
2544/* Wait until the transmitter is empty.
2545 */
2546static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout)
2547{
2548 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2549 unsigned long orig_jiffies, char_time;
2550
2551 if (!info )
2552 return;
2553
2554 if (debug_level >= DEBUG_LEVEL_INFO)
2555 printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n",
2556 __FILE__,__LINE__, info->device_name );
2557
2558 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent"))
2559 return;
2560
2561 if (!(info->flags & ASYNC_INITIALIZED))
2562 goto exit;
2563
2564 orig_jiffies = jiffies;
2565
2566 /* Set check interval to 1/5 of estimated time to
2567 * send a character, and make it at least 1. The check
2568 * interval should also be less than the timeout.
2569 * Note: use tight timings here to satisfy the NIST-PCTS.
2570 */
2571
2572 if ( info->params.data_rate ) {
2573 char_time = info->timeout/(32 * 5);
2574 if (!char_time)
2575 char_time++;
2576 } else
2577 char_time = 1;
2578
2579 if (timeout)
2580 char_time = min_t(unsigned long, char_time, timeout);
2581
2582 if (info->params.mode == MGSL_MODE_HDLC) {
2583 while (info->tx_active) {
2584 msleep_interruptible(jiffies_to_msecs(char_time));
2585 if (signal_pending(current))
2586 break;
2587 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2588 break;
2589 }
2590 } else {
2591 while ((info->tx_count || info->tx_active) &&
2592 info->tx_enabled) {
2593 msleep_interruptible(jiffies_to_msecs(char_time));
2594 if (signal_pending(current))
2595 break;
2596 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2597 break;
2598 }
2599 }
2600
2601exit:
2602 if (debug_level >= DEBUG_LEVEL_INFO)
2603 printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n",
2604 __FILE__,__LINE__, info->device_name );
2605}
2606
2607/* Called by tty_hangup() when a hangup is signaled.
2608 * This is the same as closing all open files for the port.
2609 */
2610static void mgslpc_hangup(struct tty_struct *tty)
2611{
2612 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2613
2614 if (debug_level >= DEBUG_LEVEL_INFO)
2615 printk("%s(%d):mgslpc_hangup(%s)\n",
2616 __FILE__,__LINE__, info->device_name );
2617
2618 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup"))
2619 return;
2620
2621 mgslpc_flush_buffer(tty);
2622 shutdown(info);
2623
2624 info->count = 0;
2625 info->flags &= ~ASYNC_NORMAL_ACTIVE;
2626 info->tty = NULL;
2627
2628 wake_up_interruptible(&info->open_wait);
2629}
2630
2631/* Block the current process until the specified port
2632 * is ready to be opened.
2633 */
2634static int block_til_ready(struct tty_struct *tty, struct file *filp,
2635 MGSLPC_INFO *info)
2636{
2637 DECLARE_WAITQUEUE(wait, current);
2638 int retval;
2639 int do_clocal = 0, extra_count = 0;
2640 unsigned long flags;
2641
2642 if (debug_level >= DEBUG_LEVEL_INFO)
2643 printk("%s(%d):block_til_ready on %s\n",
2644 __FILE__,__LINE__, tty->driver->name );
2645
2646 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
2647 /* nonblock mode is set or port is not enabled */
2648 /* just verify that callout device is not active */
2649 info->flags |= ASYNC_NORMAL_ACTIVE;
2650 return 0;
2651 }
2652
2653 if (tty->termios->c_cflag & CLOCAL)
2654 do_clocal = 1;
2655
2656 /* Wait for carrier detect and the line to become
2657 * free (i.e., not in use by the callout). While we are in
2658 * this loop, info->count is dropped by one, so that
2659 * mgslpc_close() knows when to free things. We restore it upon
2660 * exit, either normal or abnormal.
2661 */
2662
2663 retval = 0;
2664 add_wait_queue(&info->open_wait, &wait);
2665
2666 if (debug_level >= DEBUG_LEVEL_INFO)
2667 printk("%s(%d):block_til_ready before block on %s count=%d\n",
2668 __FILE__,__LINE__, tty->driver->name, info->count );
2669
2670 spin_lock_irqsave(&info->lock, flags);
2671 if (!tty_hung_up_p(filp)) {
2672 extra_count = 1;
2673 info->count--;
2674 }
2675 spin_unlock_irqrestore(&info->lock, flags);
2676 info->blocked_open++;
2677
2678 while (1) {
2679 if ((tty->termios->c_cflag & CBAUD)) {
2680 spin_lock_irqsave(&info->lock,flags);
2681 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2682 set_signals(info);
2683 spin_unlock_irqrestore(&info->lock,flags);
2684 }
2685
2686 set_current_state(TASK_INTERRUPTIBLE);
2687
2688 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
2689 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
2690 -EAGAIN : -ERESTARTSYS;
2691 break;
2692 }
2693
2694 spin_lock_irqsave(&info->lock,flags);
2695 get_signals(info);
2696 spin_unlock_irqrestore(&info->lock,flags);
2697
2698 if (!(info->flags & ASYNC_CLOSING) &&
2699 (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
2700 break;
2701 }
2702
2703 if (signal_pending(current)) {
2704 retval = -ERESTARTSYS;
2705 break;
2706 }
2707
2708 if (debug_level >= DEBUG_LEVEL_INFO)
2709 printk("%s(%d):block_til_ready blocking on %s count=%d\n",
2710 __FILE__,__LINE__, tty->driver->name, info->count );
2711
2712 schedule();
2713 }
2714
2715 set_current_state(TASK_RUNNING);
2716 remove_wait_queue(&info->open_wait, &wait);
2717
2718 if (extra_count)
2719 info->count++;
2720 info->blocked_open--;
2721
2722 if (debug_level >= DEBUG_LEVEL_INFO)
2723 printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
2724 __FILE__,__LINE__, tty->driver->name, info->count );
2725
2726 if (!retval)
2727 info->flags |= ASYNC_NORMAL_ACTIVE;
2728
2729 return retval;
2730}
2731
2732static int mgslpc_open(struct tty_struct *tty, struct file * filp)
2733{
2734 MGSLPC_INFO *info;
2735 int retval, line;
2736 unsigned long flags;
2737
2738 /* verify range of specified line number */
2739 line = tty->index;
2740 if ((line < 0) || (line >= mgslpc_device_count)) {
2741 printk("%s(%d):mgslpc_open with invalid line #%d.\n",
2742 __FILE__,__LINE__,line);
2743 return -ENODEV;
2744 }
2745
2746 /* find the info structure for the specified line */
2747 info = mgslpc_device_list;
2748 while(info && info->line != line)
2749 info = info->next_device;
2750 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
2751 return -ENODEV;
2752
2753 tty->driver_data = info;
2754 info->tty = tty;
2755
2756 if (debug_level >= DEBUG_LEVEL_INFO)
2757 printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
2758 __FILE__,__LINE__,tty->driver->name, info->count);
2759
2760 /* If port is closing, signal caller to try again */
2761 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
2762 if (info->flags & ASYNC_CLOSING)
2763 interruptible_sleep_on(&info->close_wait);
2764 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
2765 -EAGAIN : -ERESTARTSYS);
2766 goto cleanup;
2767 }
2768
2769 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
2770
2771 spin_lock_irqsave(&info->netlock, flags);
2772 if (info->netcount) {
2773 retval = -EBUSY;
2774 spin_unlock_irqrestore(&info->netlock, flags);
2775 goto cleanup;
2776 }
2777 info->count++;
2778 spin_unlock_irqrestore(&info->netlock, flags);
2779
2780 if (info->count == 1) {
2781 /* 1st open on this device, init hardware */
2782 retval = startup(info);
2783 if (retval < 0)
2784 goto cleanup;
2785 }
2786
2787 retval = block_til_ready(tty, filp, info);
2788 if (retval) {
2789 if (debug_level >= DEBUG_LEVEL_INFO)
2790 printk("%s(%d):block_til_ready(%s) returned %d\n",
2791 __FILE__,__LINE__, info->device_name, retval);
2792 goto cleanup;
2793 }
2794
2795 if (debug_level >= DEBUG_LEVEL_INFO)
2796 printk("%s(%d):mgslpc_open(%s) success\n",
2797 __FILE__,__LINE__, info->device_name);
2798 retval = 0;
2799
2800cleanup:
2801 if (retval) {
2802 if (tty->count == 1)
2803 info->tty = NULL; /* tty layer will release tty struct */
2804 if(info->count)
2805 info->count--;
2806 }
2807
2808 return retval;
2809}
2810
2811/*
2812 * /proc fs routines....
2813 */
2814
2815static inline int line_info(char *buf, MGSLPC_INFO *info)
2816{
2817 char stat_buf[30];
2818 int ret;
2819 unsigned long flags;
2820
2821 ret = sprintf(buf, "%s:io:%04X irq:%d",
2822 info->device_name, info->io_base, info->irq_level);
2823
2824 /* output current serial signal states */
2825 spin_lock_irqsave(&info->lock,flags);
2826 get_signals(info);
2827 spin_unlock_irqrestore(&info->lock,flags);
2828
2829 stat_buf[0] = 0;
2830 stat_buf[1] = 0;
2831 if (info->serial_signals & SerialSignal_RTS)
2832 strcat(stat_buf, "|RTS");
2833 if (info->serial_signals & SerialSignal_CTS)
2834 strcat(stat_buf, "|CTS");
2835 if (info->serial_signals & SerialSignal_DTR)
2836 strcat(stat_buf, "|DTR");
2837 if (info->serial_signals & SerialSignal_DSR)
2838 strcat(stat_buf, "|DSR");
2839 if (info->serial_signals & SerialSignal_DCD)
2840 strcat(stat_buf, "|CD");
2841 if (info->serial_signals & SerialSignal_RI)
2842 strcat(stat_buf, "|RI");
2843
2844 if (info->params.mode == MGSL_MODE_HDLC) {
2845 ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d",
2846 info->icount.txok, info->icount.rxok);
2847 if (info->icount.txunder)
2848 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
2849 if (info->icount.txabort)
2850 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
2851 if (info->icount.rxshort)
2852 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
2853 if (info->icount.rxlong)
2854 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
2855 if (info->icount.rxover)
2856 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
2857 if (info->icount.rxcrc)
2858 ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
2859 } else {
2860 ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d",
2861 info->icount.tx, info->icount.rx);
2862 if (info->icount.frame)
2863 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
2864 if (info->icount.parity)
2865 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
2866 if (info->icount.brk)
2867 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
2868 if (info->icount.overrun)
2869 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
2870 }
2871
2872 /* Append serial signal status to end */
2873 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
2874
2875 ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
2876 info->tx_active,info->bh_requested,info->bh_running,
2877 info->pending_bh);
2878
2879 return ret;
2880}
2881
2882/* Called to print information about devices
2883 */
2884static int mgslpc_read_proc(char *page, char **start, off_t off, int count,
2885 int *eof, void *data)
2886{
2887 int len = 0, l;
2888 off_t begin = 0;
2889 MGSLPC_INFO *info;
2890
2891 len += sprintf(page, "synclink driver:%s\n", driver_version);
2892
2893 info = mgslpc_device_list;
2894 while( info ) {
2895 l = line_info(page + len, info);
2896 len += l;
2897 if (len+begin > off+count)
2898 goto done;
2899 if (len+begin < off) {
2900 begin += len;
2901 len = 0;
2902 }
2903 info = info->next_device;
2904 }
2905
2906 *eof = 1;
2907done:
2908 if (off >= len+begin)
2909 return 0;
2910 *start = page + (off-begin);
2911 return ((count < begin+len-off) ? count : begin+len-off);
2912}
2913
2914int rx_alloc_buffers(MGSLPC_INFO *info)
2915{
2916 /* each buffer has header and data */
2917 info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size;
2918
2919 /* calculate total allocation size for 8 buffers */
2920 info->rx_buf_total_size = info->rx_buf_size * 8;
2921
2922 /* limit total allocated memory */
2923 if (info->rx_buf_total_size > 0x10000)
2924 info->rx_buf_total_size = 0x10000;
2925
2926 /* calculate number of buffers */
2927 info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size;
2928
2929 info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL);
2930 if (info->rx_buf == NULL)
2931 return -ENOMEM;
2932
2933 rx_reset_buffers(info);
2934 return 0;
2935}
2936
2937void rx_free_buffers(MGSLPC_INFO *info)
2938{
Jesper Juhl735d5662005-11-07 01:01:29 -08002939 kfree(info->rx_buf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002940 info->rx_buf = NULL;
2941}
2942
2943int claim_resources(MGSLPC_INFO *info)
2944{
2945 if (rx_alloc_buffers(info) < 0 ) {
2946 printk( "Cant allocate rx buffer %s\n", info->device_name);
2947 release_resources(info);
2948 return -ENODEV;
2949 }
2950 return 0;
2951}
2952
2953void release_resources(MGSLPC_INFO *info)
2954{
2955 if (debug_level >= DEBUG_LEVEL_INFO)
2956 printk("release_resources(%s)\n", info->device_name);
2957 rx_free_buffers(info);
2958}
2959
2960/* Add the specified device instance data structure to the
2961 * global linked list of devices and increment the device count.
2962 *
2963 * Arguments: info pointer to device instance data
2964 */
2965void mgslpc_add_device(MGSLPC_INFO *info)
2966{
2967 info->next_device = NULL;
2968 info->line = mgslpc_device_count;
2969 sprintf(info->device_name,"ttySLP%d",info->line);
2970
2971 if (info->line < MAX_DEVICE_COUNT) {
2972 if (maxframe[info->line])
2973 info->max_frame_size = maxframe[info->line];
2974 info->dosyncppp = dosyncppp[info->line];
2975 }
2976
2977 mgslpc_device_count++;
2978
2979 if (!mgslpc_device_list)
2980 mgslpc_device_list = info;
2981 else {
2982 MGSLPC_INFO *current_dev = mgslpc_device_list;
2983 while( current_dev->next_device )
2984 current_dev = current_dev->next_device;
2985 current_dev->next_device = info;
2986 }
2987
2988 if (info->max_frame_size < 4096)
2989 info->max_frame_size = 4096;
2990 else if (info->max_frame_size > 65535)
2991 info->max_frame_size = 65535;
2992
2993 printk( "SyncLink PC Card %s:IO=%04X IRQ=%d\n",
2994 info->device_name, info->io_base, info->irq_level);
2995
2996#ifdef CONFIG_HDLC
2997 hdlcdev_init(info);
2998#endif
2999}
3000
3001void mgslpc_remove_device(MGSLPC_INFO *remove_info)
3002{
3003 MGSLPC_INFO *info = mgslpc_device_list;
3004 MGSLPC_INFO *last = NULL;
3005
3006 while(info) {
3007 if (info == remove_info) {
3008 if (last)
3009 last->next_device = info->next_device;
3010 else
3011 mgslpc_device_list = info->next_device;
3012#ifdef CONFIG_HDLC
3013 hdlcdev_exit(info);
3014#endif
3015 release_resources(info);
3016 kfree(info);
3017 mgslpc_device_count--;
3018 return;
3019 }
3020 last = info;
3021 info = info->next_device;
3022 }
3023}
3024
Dominik Brodowski4af48c82005-06-27 16:28:42 -07003025static struct pcmcia_device_id mgslpc_ids[] = {
3026 PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050),
3027 PCMCIA_DEVICE_NULL
3028};
3029MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
3030
Linus Torvalds1da177e2005-04-16 15:20:36 -07003031static struct pcmcia_driver mgslpc_driver = {
3032 .owner = THIS_MODULE,
3033 .drv = {
3034 .name = "synclink_cs",
3035 },
Dominik Brodowskif8cfa612005-11-14 21:25:51 +01003036 .probe = mgslpc_attach,
Dominik Brodowskicc3b4862005-11-14 21:23:14 +01003037 .remove = mgslpc_detach,
Dominik Brodowski4af48c82005-06-27 16:28:42 -07003038 .id_table = mgslpc_ids,
Dominik Brodowski98e4c282005-11-14 21:21:18 +01003039 .suspend = mgslpc_suspend,
3040 .resume = mgslpc_resume,
Linus Torvalds1da177e2005-04-16 15:20:36 -07003041};
3042
3043static struct tty_operations mgslpc_ops = {
3044 .open = mgslpc_open,
3045 .close = mgslpc_close,
3046 .write = mgslpc_write,
3047 .put_char = mgslpc_put_char,
3048 .flush_chars = mgslpc_flush_chars,
3049 .write_room = mgslpc_write_room,
3050 .chars_in_buffer = mgslpc_chars_in_buffer,
3051 .flush_buffer = mgslpc_flush_buffer,
3052 .ioctl = mgslpc_ioctl,
3053 .throttle = mgslpc_throttle,
3054 .unthrottle = mgslpc_unthrottle,
3055 .send_xchar = mgslpc_send_xchar,
3056 .break_ctl = mgslpc_break,
3057 .wait_until_sent = mgslpc_wait_until_sent,
3058 .read_proc = mgslpc_read_proc,
3059 .set_termios = mgslpc_set_termios,
3060 .stop = tx_pause,
3061 .start = tx_release,
3062 .hangup = mgslpc_hangup,
3063 .tiocmget = tiocmget,
3064 .tiocmset = tiocmset,
3065};
3066
3067static void synclink_cs_cleanup(void)
3068{
3069 int rc;
3070
3071 printk("Unloading %s: version %s\n", driver_name, driver_version);
3072
3073 while(mgslpc_device_list)
3074 mgslpc_remove_device(mgslpc_device_list);
3075
3076 if (serial_driver) {
3077 if ((rc = tty_unregister_driver(serial_driver)))
3078 printk("%s(%d) failed to unregister tty driver err=%d\n",
3079 __FILE__,__LINE__,rc);
3080 put_tty_driver(serial_driver);
3081 }
3082
3083 pcmcia_unregister_driver(&mgslpc_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003084}
3085
3086static int __init synclink_cs_init(void)
3087{
3088 int rc;
3089
3090 if (break_on_load) {
3091 mgslpc_get_text_ptr();
3092 BREAKPOINT();
3093 }
3094
3095 printk("%s %s\n", driver_name, driver_version);
3096
3097 if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0)
3098 return rc;
3099
3100 serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT);
3101 if (!serial_driver) {
3102 rc = -ENOMEM;
3103 goto error;
3104 }
3105
3106 /* Initialize the tty_driver structure */
3107
3108 serial_driver->owner = THIS_MODULE;
3109 serial_driver->driver_name = "synclink_cs";
3110 serial_driver->name = "ttySLP";
3111 serial_driver->major = ttymajor;
3112 serial_driver->minor_start = 64;
3113 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3114 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3115 serial_driver->init_termios = tty_std_termios;
3116 serial_driver->init_termios.c_cflag =
3117 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3118 serial_driver->flags = TTY_DRIVER_REAL_RAW;
3119 tty_set_operations(serial_driver, &mgslpc_ops);
3120
3121 if ((rc = tty_register_driver(serial_driver)) < 0) {
3122 printk("%s(%d):Couldn't register serial driver\n",
3123 __FILE__,__LINE__);
3124 put_tty_driver(serial_driver);
3125 serial_driver = NULL;
3126 goto error;
3127 }
3128
3129 printk("%s %s, tty major#%d\n",
3130 driver_name, driver_version,
3131 serial_driver->major);
3132
3133 return 0;
3134
3135error:
3136 synclink_cs_cleanup();
3137 return rc;
3138}
3139
3140static void __exit synclink_cs_exit(void)
3141{
3142 synclink_cs_cleanup();
3143}
3144
3145module_init(synclink_cs_init);
3146module_exit(synclink_cs_exit);
3147
3148static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate)
3149{
3150 unsigned int M, N;
3151 unsigned char val;
3152
3153 /* note:standard BRG mode is broken in V3.2 chip
3154 * so enhanced mode is always used
3155 */
3156
3157 if (rate) {
3158 N = 3686400 / rate;
3159 if (!N)
3160 N = 1;
3161 N >>= 1;
3162 for (M = 1; N > 64 && M < 16; M++)
3163 N >>= 1;
3164 N--;
3165
3166 /* BGR[5..0] = N
3167 * BGR[9..6] = M
3168 * BGR[7..0] contained in BGR register
3169 * BGR[9..8] contained in CCR2[7..6]
3170 * divisor = (N+1)*2^M
3171 *
3172 * Note: M *must* not be zero (causes asymetric duty cycle)
3173 */
3174 write_reg(info, (unsigned char) (channel + BGR),
3175 (unsigned char) ((M << 6) + N));
3176 val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f;
3177 val |= ((M << 4) & 0xc0);
3178 write_reg(info, (unsigned char) (channel + CCR2), val);
3179 }
3180}
3181
3182/* Enabled the AUX clock output at the specified frequency.
3183 */
3184static void enable_auxclk(MGSLPC_INFO *info)
3185{
3186 unsigned char val;
3187
3188 /* MODE
3189 *
3190 * 07..06 MDS[1..0] 10 = transparent HDLC mode
3191 * 05 ADM Address Mode, 0 = no addr recognition
3192 * 04 TMD Timer Mode, 0 = external
3193 * 03 RAC Receiver Active, 0 = inactive
3194 * 02 RTS 0=RTS active during xmit, 1=RTS always active
3195 * 01 TRS Timer Resolution, 1=512
3196 * 00 TLP Test Loop, 0 = no loop
3197 *
3198 * 1000 0010
3199 */
3200 val = 0x82;
3201
3202 /* channel B RTS is used to enable AUXCLK driver on SP505 */
3203 if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3204 val |= BIT2;
3205 write_reg(info, CHB + MODE, val);
3206
3207 /* CCR0
3208 *
3209 * 07 PU Power Up, 1=active, 0=power down
3210 * 06 MCE Master Clock Enable, 1=enabled
3211 * 05 Reserved, 0
3212 * 04..02 SC[2..0] Encoding
3213 * 01..00 SM[1..0] Serial Mode, 00=HDLC
3214 *
3215 * 11000000
3216 */
3217 write_reg(info, CHB + CCR0, 0xc0);
3218
3219 /* CCR1
3220 *
3221 * 07 SFLG Shared Flag, 0 = disable shared flags
3222 * 06 GALP Go Active On Loop, 0 = not used
3223 * 05 GLP Go On Loop, 0 = not used
3224 * 04 ODS Output Driver Select, 1=TxD is push-pull output
3225 * 03 ITF Interframe Time Fill, 0=mark, 1=flag
3226 * 02..00 CM[2..0] Clock Mode
3227 *
3228 * 0001 0111
3229 */
3230 write_reg(info, CHB + CCR1, 0x17);
3231
3232 /* CCR2 (Channel B)
3233 *
3234 * 07..06 BGR[9..8] Baud rate bits 9..8
3235 * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
3236 * 04 SSEL Clock source select, 1=submode b
3237 * 03 TOE 0=TxCLK is input, 1=TxCLK is output
3238 * 02 RWX Read/Write Exchange 0=disabled
3239 * 01 C32, CRC select, 0=CRC-16, 1=CRC-32
3240 * 00 DIV, data inversion 0=disabled, 1=enabled
3241 *
3242 * 0011 1000
3243 */
3244 if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3245 write_reg(info, CHB + CCR2, 0x38);
3246 else
3247 write_reg(info, CHB + CCR2, 0x30);
3248
3249 /* CCR4
3250 *
3251 * 07 MCK4 Master Clock Divide by 4, 1=enabled
3252 * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3253 * 05 TST1 Test Pin, 0=normal operation
3254 * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
3255 * 03..02 Reserved, must be 0
3256 * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
3257 *
3258 * 0101 0000
3259 */
3260 write_reg(info, CHB + CCR4, 0x50);
3261
3262 /* if auxclk not enabled, set internal BRG so
3263 * CTS transitions can be detected (requires TxC)
3264 */
3265 if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3266 mgslpc_set_rate(info, CHB, info->params.clock_speed);
3267 else
3268 mgslpc_set_rate(info, CHB, 921600);
3269}
3270
3271static void loopback_enable(MGSLPC_INFO *info)
3272{
3273 unsigned char val;
3274
3275 /* CCR1:02..00 CM[2..0] Clock Mode = 111 (clock mode 7) */
3276 val = read_reg(info, CHA + CCR1) | (BIT2 + BIT1 + BIT0);
3277 write_reg(info, CHA + CCR1, val);
3278
3279 /* CCR2:04 SSEL Clock source select, 1=submode b */
3280 val = read_reg(info, CHA + CCR2) | (BIT4 + BIT5);
3281 write_reg(info, CHA + CCR2, val);
3282
3283 /* set LinkSpeed if available, otherwise default to 2Mbps */
3284 if (info->params.clock_speed)
3285 mgslpc_set_rate(info, CHA, info->params.clock_speed);
3286 else
3287 mgslpc_set_rate(info, CHA, 1843200);
3288
3289 /* MODE:00 TLP Test Loop, 1=loopback enabled */
3290 val = read_reg(info, CHA + MODE) | BIT0;
3291 write_reg(info, CHA + MODE, val);
3292}
3293
3294void hdlc_mode(MGSLPC_INFO *info)
3295{
3296 unsigned char val;
3297 unsigned char clkmode, clksubmode;
3298
3299 /* disable all interrupts */
3300 irq_disable(info, CHA, 0xffff);
3301 irq_disable(info, CHB, 0xffff);
3302 port_irq_disable(info, 0xff);
3303
3304 /* assume clock mode 0a, rcv=RxC xmt=TxC */
3305 clkmode = clksubmode = 0;
3306 if (info->params.flags & HDLC_FLAG_RXC_DPLL
3307 && info->params.flags & HDLC_FLAG_TXC_DPLL) {
3308 /* clock mode 7a, rcv = DPLL, xmt = DPLL */
3309 clkmode = 7;
3310 } else if (info->params.flags & HDLC_FLAG_RXC_BRG
3311 && info->params.flags & HDLC_FLAG_TXC_BRG) {
3312 /* clock mode 7b, rcv = BRG, xmt = BRG */
3313 clkmode = 7;
3314 clksubmode = 1;
3315 } else if (info->params.flags & HDLC_FLAG_RXC_DPLL) {
3316 if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3317 /* clock mode 6b, rcv = DPLL, xmt = BRG/16 */
3318 clkmode = 6;
3319 clksubmode = 1;
3320 } else {
3321 /* clock mode 6a, rcv = DPLL, xmt = TxC */
3322 clkmode = 6;
3323 }
3324 } else if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3325 /* clock mode 0b, rcv = RxC, xmt = BRG */
3326 clksubmode = 1;
3327 }
3328
3329 /* MODE
3330 *
3331 * 07..06 MDS[1..0] 10 = transparent HDLC mode
3332 * 05 ADM Address Mode, 0 = no addr recognition
3333 * 04 TMD Timer Mode, 0 = external
3334 * 03 RAC Receiver Active, 0 = inactive
3335 * 02 RTS 0=RTS active during xmit, 1=RTS always active
3336 * 01 TRS Timer Resolution, 1=512
3337 * 00 TLP Test Loop, 0 = no loop
3338 *
3339 * 1000 0010
3340 */
3341 val = 0x82;
3342 if (info->params.loopback)
3343 val |= BIT0;
3344
3345 /* preserve RTS state */
3346 if (info->serial_signals & SerialSignal_RTS)
3347 val |= BIT2;
3348 write_reg(info, CHA + MODE, val);
3349
3350 /* CCR0
3351 *
3352 * 07 PU Power Up, 1=active, 0=power down
3353 * 06 MCE Master Clock Enable, 1=enabled
3354 * 05 Reserved, 0
3355 * 04..02 SC[2..0] Encoding
3356 * 01..00 SM[1..0] Serial Mode, 00=HDLC
3357 *
3358 * 11000000
3359 */
3360 val = 0xc0;
3361 switch (info->params.encoding)
3362 {
3363 case HDLC_ENCODING_NRZI:
3364 val |= BIT3;
3365 break;
3366 case HDLC_ENCODING_BIPHASE_SPACE:
3367 val |= BIT4;
3368 break; // FM0
3369 case HDLC_ENCODING_BIPHASE_MARK:
3370 val |= BIT4 + BIT2;
3371 break; // FM1
3372 case HDLC_ENCODING_BIPHASE_LEVEL:
3373 val |= BIT4 + BIT3;
3374 break; // Manchester
3375 }
3376 write_reg(info, CHA + CCR0, val);
3377
3378 /* CCR1
3379 *
3380 * 07 SFLG Shared Flag, 0 = disable shared flags
3381 * 06 GALP Go Active On Loop, 0 = not used
3382 * 05 GLP Go On Loop, 0 = not used
3383 * 04 ODS Output Driver Select, 1=TxD is push-pull output
3384 * 03 ITF Interframe Time Fill, 0=mark, 1=flag
3385 * 02..00 CM[2..0] Clock Mode
3386 *
3387 * 0001 0000
3388 */
3389 val = 0x10 + clkmode;
3390 write_reg(info, CHA + CCR1, val);
3391
3392 /* CCR2
3393 *
3394 * 07..06 BGR[9..8] Baud rate bits 9..8
3395 * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
3396 * 04 SSEL Clock source select, 1=submode b
3397 * 03 TOE 0=TxCLK is input, 0=TxCLK is input
3398 * 02 RWX Read/Write Exchange 0=disabled
3399 * 01 C32, CRC select, 0=CRC-16, 1=CRC-32
3400 * 00 DIV, data inversion 0=disabled, 1=enabled
3401 *
3402 * 0000 0000
3403 */
3404 val = 0x00;
3405 if (clkmode == 2 || clkmode == 3 || clkmode == 6
3406 || clkmode == 7 || (clkmode == 0 && clksubmode == 1))
3407 val |= BIT5;
3408 if (clksubmode)
3409 val |= BIT4;
3410 if (info->params.crc_type == HDLC_CRC_32_CCITT)
3411 val |= BIT1;
3412 if (info->params.encoding == HDLC_ENCODING_NRZB)
3413 val |= BIT0;
3414 write_reg(info, CHA + CCR2, val);
3415
3416 /* CCR3
3417 *
3418 * 07..06 PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8
3419 * 05 EPT Enable preamble transmission, 1=enabled
3420 * 04 RADD Receive address pushed to FIFO, 0=disabled
3421 * 03 CRL CRC Reset Level, 0=FFFF
3422 * 02 RCRC Rx CRC 0=On 1=Off
3423 * 01 TCRC Tx CRC 0=On 1=Off
3424 * 00 PSD DPLL Phase Shift Disable
3425 *
3426 * 0000 0000
3427 */
3428 val = 0x00;
3429 if (info->params.crc_type == HDLC_CRC_NONE)
3430 val |= BIT2 + BIT1;
3431 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
3432 val |= BIT5;
3433 switch (info->params.preamble_length)
3434 {
3435 case HDLC_PREAMBLE_LENGTH_16BITS:
3436 val |= BIT6;
3437 break;
3438 case HDLC_PREAMBLE_LENGTH_32BITS:
3439 val |= BIT6;
3440 break;
3441 case HDLC_PREAMBLE_LENGTH_64BITS:
3442 val |= BIT7 + BIT6;
3443 break;
3444 }
3445 write_reg(info, CHA + CCR3, val);
3446
3447 /* PRE - Preamble pattern */
3448 val = 0;
3449 switch (info->params.preamble)
3450 {
3451 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
3452 case HDLC_PREAMBLE_PATTERN_10: val = 0xaa; break;
3453 case HDLC_PREAMBLE_PATTERN_01: val = 0x55; break;
3454 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
3455 }
3456 write_reg(info, CHA + PRE, val);
3457
3458 /* CCR4
3459 *
3460 * 07 MCK4 Master Clock Divide by 4, 1=enabled
3461 * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3462 * 05 TST1 Test Pin, 0=normal operation
3463 * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
3464 * 03..02 Reserved, must be 0
3465 * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
3466 *
3467 * 0101 0000
3468 */
3469 val = 0x50;
3470 write_reg(info, CHA + CCR4, val);
3471 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
3472 mgslpc_set_rate(info, CHA, info->params.clock_speed * 16);
3473 else
3474 mgslpc_set_rate(info, CHA, info->params.clock_speed);
3475
3476 /* RLCR Receive length check register
3477 *
3478 * 7 1=enable receive length check
3479 * 6..0 Max frame length = (RL + 1) * 32
3480 */
3481 write_reg(info, CHA + RLCR, 0);
3482
3483 /* XBCH Transmit Byte Count High
3484 *
3485 * 07 DMA mode, 0 = interrupt driven
3486 * 06 NRM, 0=ABM (ignored)
3487 * 05 CAS Carrier Auto Start
3488 * 04 XC Transmit Continuously (ignored)
3489 * 03..00 XBC[10..8] Transmit byte count bits 10..8
3490 *
3491 * 0000 0000
3492 */
3493 val = 0x00;
3494 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3495 val |= BIT5;
3496 write_reg(info, CHA + XBCH, val);
3497 enable_auxclk(info);
3498 if (info->params.loopback || info->testing_irq)
3499 loopback_enable(info);
3500 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3501 {
3502 irq_enable(info, CHB, IRQ_CTS);
3503 /* PVR[3] 1=AUTO CTS active */
3504 set_reg_bits(info, CHA + PVR, BIT3);
3505 } else
3506 clear_reg_bits(info, CHA + PVR, BIT3);
3507
3508 irq_enable(info, CHA,
3509 IRQ_RXEOM + IRQ_RXFIFO + IRQ_ALLSENT +
3510 IRQ_UNDERRUN + IRQ_TXFIFO);
3511 issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3512 wait_command_complete(info, CHA);
3513 read_reg16(info, CHA + ISR); /* clear pending IRQs */
3514
3515 /* Master clock mode enabled above to allow reset commands
3516 * to complete even if no data clocks are present.
3517 *
3518 * Disable master clock mode for normal communications because
3519 * V3.2 of the ESCC2 has a bug that prevents the transmit all sent
3520 * IRQ when in master clock mode.
3521 *
3522 * Leave master clock mode enabled for IRQ test because the
3523 * timer IRQ used by the test can only happen in master clock mode.
3524 */
3525 if (!info->testing_irq)
3526 clear_reg_bits(info, CHA + CCR0, BIT6);
3527
3528 tx_set_idle(info);
3529
3530 tx_stop(info);
3531 rx_stop(info);
3532}
3533
3534void rx_stop(MGSLPC_INFO *info)
3535{
3536 if (debug_level >= DEBUG_LEVEL_ISR)
3537 printk("%s(%d):rx_stop(%s)\n",
3538 __FILE__,__LINE__, info->device_name );
3539
3540 /* MODE:03 RAC Receiver Active, 0=inactive */
3541 clear_reg_bits(info, CHA + MODE, BIT3);
3542
3543 info->rx_enabled = 0;
3544 info->rx_overflow = 0;
3545}
3546
3547void rx_start(MGSLPC_INFO *info)
3548{
3549 if (debug_level >= DEBUG_LEVEL_ISR)
3550 printk("%s(%d):rx_start(%s)\n",
3551 __FILE__,__LINE__, info->device_name );
3552
3553 rx_reset_buffers(info);
3554 info->rx_enabled = 0;
3555 info->rx_overflow = 0;
3556
3557 /* MODE:03 RAC Receiver Active, 1=active */
3558 set_reg_bits(info, CHA + MODE, BIT3);
3559
3560 info->rx_enabled = 1;
3561}
3562
3563void tx_start(MGSLPC_INFO *info)
3564{
3565 if (debug_level >= DEBUG_LEVEL_ISR)
3566 printk("%s(%d):tx_start(%s)\n",
3567 __FILE__,__LINE__, info->device_name );
3568
3569 if (info->tx_count) {
3570 /* If auto RTS enabled and RTS is inactive, then assert */
3571 /* RTS and set a flag indicating that the driver should */
3572 /* negate RTS when the transmission completes. */
3573 info->drop_rts_on_tx_done = 0;
3574
3575 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3576 get_signals(info);
3577 if (!(info->serial_signals & SerialSignal_RTS)) {
3578 info->serial_signals |= SerialSignal_RTS;
3579 set_signals(info);
3580 info->drop_rts_on_tx_done = 1;
3581 }
3582 }
3583
3584 if (info->params.mode == MGSL_MODE_ASYNC) {
3585 if (!info->tx_active) {
3586 info->tx_active = 1;
3587 tx_ready(info);
3588 }
3589 } else {
3590 info->tx_active = 1;
3591 tx_ready(info);
3592 info->tx_timer.expires = jiffies + msecs_to_jiffies(5000);
3593 add_timer(&info->tx_timer);
3594 }
3595 }
3596
3597 if (!info->tx_enabled)
3598 info->tx_enabled = 1;
3599}
3600
3601void tx_stop(MGSLPC_INFO *info)
3602{
3603 if (debug_level >= DEBUG_LEVEL_ISR)
3604 printk("%s(%d):tx_stop(%s)\n",
3605 __FILE__,__LINE__, info->device_name );
3606
3607 del_timer(&info->tx_timer);
3608
3609 info->tx_enabled = 0;
3610 info->tx_active = 0;
3611}
3612
3613/* Reset the adapter to a known state and prepare it for further use.
3614 */
3615void reset_device(MGSLPC_INFO *info)
3616{
3617 /* power up both channels (set BIT7) */
3618 write_reg(info, CHA + CCR0, 0x80);
3619 write_reg(info, CHB + CCR0, 0x80);
3620 write_reg(info, CHA + MODE, 0);
3621 write_reg(info, CHB + MODE, 0);
3622
3623 /* disable all interrupts */
3624 irq_disable(info, CHA, 0xffff);
3625 irq_disable(info, CHB, 0xffff);
3626 port_irq_disable(info, 0xff);
3627
3628 /* PCR Port Configuration Register
3629 *
3630 * 07..04 DEC[3..0] Serial I/F select outputs
3631 * 03 output, 1=AUTO CTS control enabled
3632 * 02 RI Ring Indicator input 0=active
3633 * 01 DSR input 0=active
3634 * 00 DTR output 0=active
3635 *
3636 * 0000 0110
3637 */
3638 write_reg(info, PCR, 0x06);
3639
3640 /* PVR Port Value Register
3641 *
3642 * 07..04 DEC[3..0] Serial I/F select (0000=disabled)
3643 * 03 AUTO CTS output 1=enabled
3644 * 02 RI Ring Indicator input
3645 * 01 DSR input
3646 * 00 DTR output (1=inactive)
3647 *
3648 * 0000 0001
3649 */
3650// write_reg(info, PVR, PVR_DTR);
3651
3652 /* IPC Interrupt Port Configuration
3653 *
3654 * 07 VIS 1=Masked interrupts visible
3655 * 06..05 Reserved, 0
3656 * 04..03 SLA Slave address, 00 ignored
3657 * 02 CASM Cascading Mode, 1=daisy chain
3658 * 01..00 IC[1..0] Interrupt Config, 01=push-pull output, active low
3659 *
3660 * 0000 0101
3661 */
3662 write_reg(info, IPC, 0x05);
3663}
3664
3665void async_mode(MGSLPC_INFO *info)
3666{
3667 unsigned char val;
3668
3669 /* disable all interrupts */
3670 irq_disable(info, CHA, 0xffff);
3671 irq_disable(info, CHB, 0xffff);
3672 port_irq_disable(info, 0xff);
3673
3674 /* MODE
3675 *
3676 * 07 Reserved, 0
3677 * 06 FRTS RTS State, 0=active
3678 * 05 FCTS Flow Control on CTS
3679 * 04 FLON Flow Control Enable
3680 * 03 RAC Receiver Active, 0 = inactive
3681 * 02 RTS 0=Auto RTS, 1=manual RTS
3682 * 01 TRS Timer Resolution, 1=512
3683 * 00 TLP Test Loop, 0 = no loop
3684 *
3685 * 0000 0110
3686 */
3687 val = 0x06;
3688 if (info->params.loopback)
3689 val |= BIT0;
3690
3691 /* preserve RTS state */
3692 if (!(info->serial_signals & SerialSignal_RTS))
3693 val |= BIT6;
3694 write_reg(info, CHA + MODE, val);
3695
3696 /* CCR0
3697 *
3698 * 07 PU Power Up, 1=active, 0=power down
3699 * 06 MCE Master Clock Enable, 1=enabled
3700 * 05 Reserved, 0
3701 * 04..02 SC[2..0] Encoding, 000=NRZ
3702 * 01..00 SM[1..0] Serial Mode, 11=Async
3703 *
3704 * 1000 0011
3705 */
3706 write_reg(info, CHA + CCR0, 0x83);
3707
3708 /* CCR1
3709 *
3710 * 07..05 Reserved, 0
3711 * 04 ODS Output Driver Select, 1=TxD is push-pull output
3712 * 03 BCR Bit Clock Rate, 1=16x
3713 * 02..00 CM[2..0] Clock Mode, 111=BRG
3714 *
3715 * 0001 1111
3716 */
3717 write_reg(info, CHA + CCR1, 0x1f);
3718
3719 /* CCR2 (channel A)
3720 *
3721 * 07..06 BGR[9..8] Baud rate bits 9..8
3722 * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
3723 * 04 SSEL Clock source select, 1=submode b
3724 * 03 TOE 0=TxCLK is input, 0=TxCLK is input
3725 * 02 RWX Read/Write Exchange 0=disabled
3726 * 01 Reserved, 0
3727 * 00 DIV, data inversion 0=disabled, 1=enabled
3728 *
3729 * 0001 0000
3730 */
3731 write_reg(info, CHA + CCR2, 0x10);
3732
3733 /* CCR3
3734 *
3735 * 07..01 Reserved, 0
3736 * 00 PSD DPLL Phase Shift Disable
3737 *
3738 * 0000 0000
3739 */
3740 write_reg(info, CHA + CCR3, 0);
3741
3742 /* CCR4
3743 *
3744 * 07 MCK4 Master Clock Divide by 4, 1=enabled
3745 * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3746 * 05 TST1 Test Pin, 0=normal operation
3747 * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
3748 * 03..00 Reserved, must be 0
3749 *
3750 * 0101 0000
3751 */
3752 write_reg(info, CHA + CCR4, 0x50);
3753 mgslpc_set_rate(info, CHA, info->params.data_rate * 16);
3754
3755 /* DAFO Data Format
3756 *
3757 * 07 Reserved, 0
3758 * 06 XBRK transmit break, 0=normal operation
3759 * 05 Stop bits (0=1, 1=2)
3760 * 04..03 PAR[1..0] Parity (01=odd, 10=even)
3761 * 02 PAREN Parity Enable
3762 * 01..00 CHL[1..0] Character Length (00=8, 01=7)
3763 *
3764 */
3765 val = 0x00;
3766 if (info->params.data_bits != 8)
3767 val |= BIT0; /* 7 bits */
3768 if (info->params.stop_bits != 1)
3769 val |= BIT5;
3770 if (info->params.parity != ASYNC_PARITY_NONE)
3771 {
3772 val |= BIT2; /* Parity enable */
3773 if (info->params.parity == ASYNC_PARITY_ODD)
3774 val |= BIT3;
3775 else
3776 val |= BIT4;
3777 }
3778 write_reg(info, CHA + DAFO, val);
3779
3780 /* RFC Rx FIFO Control
3781 *
3782 * 07 Reserved, 0
3783 * 06 DPS, 1=parity bit not stored in data byte
3784 * 05 DXS, 0=all data stored in FIFO (including XON/XOFF)
3785 * 04 RFDF Rx FIFO Data Format, 1=status byte stored in FIFO
3786 * 03..02 RFTH[1..0], rx threshold, 11=16 status + 16 data byte
3787 * 01 Reserved, 0
3788 * 00 TCDE Terminate Char Detect Enable, 0=disabled
3789 *
3790 * 0101 1100
3791 */
3792 write_reg(info, CHA + RFC, 0x5c);
3793
3794 /* RLCR Receive length check register
3795 *
3796 * Max frame length = (RL + 1) * 32
3797 */
3798 write_reg(info, CHA + RLCR, 0);
3799
3800 /* XBCH Transmit Byte Count High
3801 *
3802 * 07 DMA mode, 0 = interrupt driven
3803 * 06 NRM, 0=ABM (ignored)
3804 * 05 CAS Carrier Auto Start
3805 * 04 XC Transmit Continuously (ignored)
3806 * 03..00 XBC[10..8] Transmit byte count bits 10..8
3807 *
3808 * 0000 0000
3809 */
3810 val = 0x00;
3811 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3812 val |= BIT5;
3813 write_reg(info, CHA + XBCH, val);
3814 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3815 irq_enable(info, CHA, IRQ_CTS);
3816
3817 /* MODE:03 RAC Receiver Active, 1=active */
3818 set_reg_bits(info, CHA + MODE, BIT3);
3819 enable_auxclk(info);
3820 if (info->params.flags & HDLC_FLAG_AUTO_CTS) {
3821 irq_enable(info, CHB, IRQ_CTS);
3822 /* PVR[3] 1=AUTO CTS active */
3823 set_reg_bits(info, CHA + PVR, BIT3);
3824 } else
3825 clear_reg_bits(info, CHA + PVR, BIT3);
3826 irq_enable(info, CHA,
3827 IRQ_RXEOM + IRQ_RXFIFO + IRQ_BREAK_ON + IRQ_RXTIME +
3828 IRQ_ALLSENT + IRQ_TXFIFO);
3829 issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3830 wait_command_complete(info, CHA);
3831 read_reg16(info, CHA + ISR); /* clear pending IRQs */
3832}
3833
3834/* Set the HDLC idle mode for the transmitter.
3835 */
3836void tx_set_idle(MGSLPC_INFO *info)
3837{
3838 /* Note: ESCC2 only supports flags and one idle modes */
3839 if (info->idle_mode == HDLC_TXIDLE_FLAGS)
3840 set_reg_bits(info, CHA + CCR1, BIT3);
3841 else
3842 clear_reg_bits(info, CHA + CCR1, BIT3);
3843}
3844
3845/* get state of the V24 status (input) signals.
3846 */
3847void get_signals(MGSLPC_INFO *info)
3848{
3849 unsigned char status = 0;
3850
3851 /* preserve DTR and RTS */
3852 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
3853
3854 if (read_reg(info, CHB + VSTR) & BIT7)
3855 info->serial_signals |= SerialSignal_DCD;
3856 if (read_reg(info, CHB + STAR) & BIT1)
3857 info->serial_signals |= SerialSignal_CTS;
3858
3859 status = read_reg(info, CHA + PVR);
3860 if (!(status & PVR_RI))
3861 info->serial_signals |= SerialSignal_RI;
3862 if (!(status & PVR_DSR))
3863 info->serial_signals |= SerialSignal_DSR;
3864}
3865
3866/* Set the state of DTR and RTS based on contents of
3867 * serial_signals member of device extension.
3868 */
3869void set_signals(MGSLPC_INFO *info)
3870{
3871 unsigned char val;
3872
3873 val = read_reg(info, CHA + MODE);
3874 if (info->params.mode == MGSL_MODE_ASYNC) {
3875 if (info->serial_signals & SerialSignal_RTS)
3876 val &= ~BIT6;
3877 else
3878 val |= BIT6;
3879 } else {
3880 if (info->serial_signals & SerialSignal_RTS)
3881 val |= BIT2;
3882 else
3883 val &= ~BIT2;
3884 }
3885 write_reg(info, CHA + MODE, val);
3886
3887 if (info->serial_signals & SerialSignal_DTR)
3888 clear_reg_bits(info, CHA + PVR, PVR_DTR);
3889 else
3890 set_reg_bits(info, CHA + PVR, PVR_DTR);
3891}
3892
3893void rx_reset_buffers(MGSLPC_INFO *info)
3894{
3895 RXBUF *buf;
3896 int i;
3897
3898 info->rx_put = 0;
3899 info->rx_get = 0;
3900 info->rx_frame_count = 0;
3901 for (i=0 ; i < info->rx_buf_count ; i++) {
3902 buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size));
3903 buf->status = buf->count = 0;
3904 }
3905}
3906
3907/* Attempt to return a received HDLC frame
3908 * Only frames received without errors are returned.
3909 *
3910 * Returns 1 if frame returned, otherwise 0
3911 */
3912int rx_get_frame(MGSLPC_INFO *info)
3913{
3914 unsigned short status;
3915 RXBUF *buf;
3916 unsigned int framesize = 0;
3917 unsigned long flags;
3918 struct tty_struct *tty = info->tty;
3919 int return_frame = 0;
3920
3921 if (info->rx_frame_count == 0)
3922 return 0;
3923
3924 buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size));
3925
3926 status = buf->status;
3927
3928 /* 07 VFR 1=valid frame
3929 * 06 RDO 1=data overrun
3930 * 05 CRC 1=OK, 0=error
3931 * 04 RAB 1=frame aborted
3932 */
3933 if ((status & 0xf0) != 0xA0) {
3934 if (!(status & BIT7) || (status & BIT4))
3935 info->icount.rxabort++;
3936 else if (status & BIT6)
3937 info->icount.rxover++;
3938 else if (!(status & BIT5)) {
3939 info->icount.rxcrc++;
3940 if (info->params.crc_type & HDLC_CRC_RETURN_EX)
3941 return_frame = 1;
3942 }
3943 framesize = 0;
3944#ifdef CONFIG_HDLC
3945 {
3946 struct net_device_stats *stats = hdlc_stats(info->netdev);
3947 stats->rx_errors++;
3948 stats->rx_frame_errors++;
3949 }
3950#endif
3951 } else
3952 return_frame = 1;
3953
3954 if (return_frame)
3955 framesize = buf->count;
3956
3957 if (debug_level >= DEBUG_LEVEL_BH)
3958 printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n",
3959 __FILE__,__LINE__,info->device_name,status,framesize);
3960
3961 if (debug_level >= DEBUG_LEVEL_DATA)
3962 trace_block(info, buf->data, framesize, 0);
3963
3964 if (framesize) {
3965 if ((info->params.crc_type & HDLC_CRC_RETURN_EX &&
3966 framesize+1 > info->max_frame_size) ||
3967 framesize > info->max_frame_size)
3968 info->icount.rxlong++;
3969 else {
3970 if (status & BIT5)
3971 info->icount.rxok++;
3972
3973 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
3974 *(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR;
3975 ++framesize;
3976 }
3977
3978#ifdef CONFIG_HDLC
3979 if (info->netcount)
3980 hdlcdev_rx(info, buf->data, framesize);
3981 else
3982#endif
3983 ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize);
3984 }
3985 }
3986
3987 spin_lock_irqsave(&info->lock,flags);
3988 buf->status = buf->count = 0;
3989 info->rx_frame_count--;
3990 info->rx_get++;
3991 if (info->rx_get >= info->rx_buf_count)
3992 info->rx_get = 0;
3993 spin_unlock_irqrestore(&info->lock,flags);
3994
3995 return 1;
3996}
3997
3998BOOLEAN register_test(MGSLPC_INFO *info)
3999{
4000 static unsigned char patterns[] =
4001 { 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f };
Tobias Klauserfe971072006-01-09 20:54:02 -08004002 static unsigned int count = ARRAY_SIZE(patterns);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004003 unsigned int i;
4004 BOOLEAN rc = TRUE;
4005 unsigned long flags;
4006
4007 spin_lock_irqsave(&info->lock,flags);
4008 reset_device(info);
4009
4010 for (i = 0; i < count; i++) {
4011 write_reg(info, XAD1, patterns[i]);
4012 write_reg(info, XAD2, patterns[(i + 1) % count]);
Tobias Klauserfe971072006-01-09 20:54:02 -08004013 if ((read_reg(info, XAD1) != patterns[i]) ||
Linus Torvalds1da177e2005-04-16 15:20:36 -07004014 (read_reg(info, XAD2) != patterns[(i + 1) % count])) {
4015 rc = FALSE;
4016 break;
4017 }
4018 }
4019
4020 spin_unlock_irqrestore(&info->lock,flags);
4021 return rc;
4022}
4023
4024BOOLEAN irq_test(MGSLPC_INFO *info)
4025{
4026 unsigned long end_time;
4027 unsigned long flags;
4028
4029 spin_lock_irqsave(&info->lock,flags);
4030 reset_device(info);
4031
4032 info->testing_irq = TRUE;
4033 hdlc_mode(info);
4034
4035 info->irq_occurred = FALSE;
4036
4037 /* init hdlc mode */
4038
4039 irq_enable(info, CHA, IRQ_TIMER);
4040 write_reg(info, CHA + TIMR, 0); /* 512 cycles */
4041 issue_command(info, CHA, CMD_START_TIMER);
4042
4043 spin_unlock_irqrestore(&info->lock,flags);
4044
4045 end_time=100;
4046 while(end_time-- && !info->irq_occurred) {
4047 msleep_interruptible(10);
4048 }
4049
4050 info->testing_irq = FALSE;
4051
4052 spin_lock_irqsave(&info->lock,flags);
4053 reset_device(info);
4054 spin_unlock_irqrestore(&info->lock,flags);
4055
4056 return info->irq_occurred ? TRUE : FALSE;
4057}
4058
4059int adapter_test(MGSLPC_INFO *info)
4060{
4061 if (!register_test(info)) {
4062 info->init_error = DiagStatus_AddressFailure;
4063 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
4064 __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
4065 return -ENODEV;
4066 }
4067
4068 if (!irq_test(info)) {
4069 info->init_error = DiagStatus_IrqFailure;
4070 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
4071 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
4072 return -ENODEV;
4073 }
4074
4075 if (debug_level >= DEBUG_LEVEL_INFO)
4076 printk("%s(%d):device %s passed diagnostics\n",
4077 __FILE__,__LINE__,info->device_name);
4078 return 0;
4079}
4080
4081void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
4082{
4083 int i;
4084 int linecount;
4085 if (xmit)
4086 printk("%s tx data:\n",info->device_name);
4087 else
4088 printk("%s rx data:\n",info->device_name);
4089
4090 while(count) {
4091 if (count > 16)
4092 linecount = 16;
4093 else
4094 linecount = count;
4095
4096 for(i=0;i<linecount;i++)
4097 printk("%02X ",(unsigned char)data[i]);
4098 for(;i<17;i++)
4099 printk(" ");
4100 for(i=0;i<linecount;i++) {
4101 if (data[i]>=040 && data[i]<=0176)
4102 printk("%c",data[i]);
4103 else
4104 printk(".");
4105 }
4106 printk("\n");
4107
4108 data += linecount;
4109 count -= linecount;
4110 }
4111}
4112
4113/* HDLC frame time out
4114 * update stats and do tx completion processing
4115 */
4116void tx_timeout(unsigned long context)
4117{
4118 MGSLPC_INFO *info = (MGSLPC_INFO*)context;
4119 unsigned long flags;
4120
4121 if ( debug_level >= DEBUG_LEVEL_INFO )
4122 printk( "%s(%d):tx_timeout(%s)\n",
4123 __FILE__,__LINE__,info->device_name);
4124 if(info->tx_active &&
4125 info->params.mode == MGSL_MODE_HDLC) {
4126 info->icount.txtimeout++;
4127 }
4128 spin_lock_irqsave(&info->lock,flags);
4129 info->tx_active = 0;
4130 info->tx_count = info->tx_put = info->tx_get = 0;
4131
4132 spin_unlock_irqrestore(&info->lock,flags);
4133
4134#ifdef CONFIG_HDLC
4135 if (info->netcount)
4136 hdlcdev_tx_done(info);
4137 else
4138#endif
4139 bh_transmit(info);
4140}
4141
4142#ifdef CONFIG_HDLC
4143
4144/**
4145 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
4146 * set encoding and frame check sequence (FCS) options
4147 *
4148 * dev pointer to network device structure
4149 * encoding serial encoding setting
4150 * parity FCS setting
4151 *
4152 * returns 0 if success, otherwise error code
4153 */
4154static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
4155 unsigned short parity)
4156{
4157 MGSLPC_INFO *info = dev_to_port(dev);
4158 unsigned char new_encoding;
4159 unsigned short new_crctype;
4160
4161 /* return error if TTY interface open */
4162 if (info->count)
4163 return -EBUSY;
4164
4165 switch (encoding)
4166 {
4167 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
4168 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
4169 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
4170 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
4171 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
4172 default: return -EINVAL;
4173 }
4174
4175 switch (parity)
4176 {
4177 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
4178 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
4179 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
4180 default: return -EINVAL;
4181 }
4182
4183 info->params.encoding = new_encoding;
4184 info->params.crc_type = new_crctype;;
4185
4186 /* if network interface up, reprogram hardware */
4187 if (info->netcount)
4188 mgslpc_program_hw(info);
4189
4190 return 0;
4191}
4192
4193/**
4194 * called by generic HDLC layer to send frame
4195 *
4196 * skb socket buffer containing HDLC frame
4197 * dev pointer to network device structure
4198 *
4199 * returns 0 if success, otherwise error code
4200 */
4201static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
4202{
4203 MGSLPC_INFO *info = dev_to_port(dev);
4204 struct net_device_stats *stats = hdlc_stats(dev);
4205 unsigned long flags;
4206
4207 if (debug_level >= DEBUG_LEVEL_INFO)
4208 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
4209
4210 /* stop sending until this frame completes */
4211 netif_stop_queue(dev);
4212
4213 /* copy data to device buffers */
4214 memcpy(info->tx_buf, skb->data, skb->len);
4215 info->tx_get = 0;
4216 info->tx_put = info->tx_count = skb->len;
4217
4218 /* update network statistics */
4219 stats->tx_packets++;
4220 stats->tx_bytes += skb->len;
4221
4222 /* done with socket buffer, so free it */
4223 dev_kfree_skb(skb);
4224
4225 /* save start time for transmit timeout detection */
4226 dev->trans_start = jiffies;
4227
4228 /* start hardware transmitter if necessary */
4229 spin_lock_irqsave(&info->lock,flags);
4230 if (!info->tx_active)
4231 tx_start(info);
4232 spin_unlock_irqrestore(&info->lock,flags);
4233
4234 return 0;
4235}
4236
4237/**
4238 * called by network layer when interface enabled
4239 * claim resources and initialize hardware
4240 *
4241 * dev pointer to network device structure
4242 *
4243 * returns 0 if success, otherwise error code
4244 */
4245static int hdlcdev_open(struct net_device *dev)
4246{
4247 MGSLPC_INFO *info = dev_to_port(dev);
4248 int rc;
4249 unsigned long flags;
4250
4251 if (debug_level >= DEBUG_LEVEL_INFO)
4252 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
4253
4254 /* generic HDLC layer open processing */
4255 if ((rc = hdlc_open(dev)))
4256 return rc;
4257
4258 /* arbitrate between network and tty opens */
4259 spin_lock_irqsave(&info->netlock, flags);
4260 if (info->count != 0 || info->netcount != 0) {
4261 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
4262 spin_unlock_irqrestore(&info->netlock, flags);
4263 return -EBUSY;
4264 }
4265 info->netcount=1;
4266 spin_unlock_irqrestore(&info->netlock, flags);
4267
4268 /* claim resources and init adapter */
4269 if ((rc = startup(info)) != 0) {
4270 spin_lock_irqsave(&info->netlock, flags);
4271 info->netcount=0;
4272 spin_unlock_irqrestore(&info->netlock, flags);
4273 return rc;
4274 }
4275
4276 /* assert DTR and RTS, apply hardware settings */
4277 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
4278 mgslpc_program_hw(info);
4279
4280 /* enable network layer transmit */
4281 dev->trans_start = jiffies;
4282 netif_start_queue(dev);
4283
4284 /* inform generic HDLC layer of current DCD status */
4285 spin_lock_irqsave(&info->lock, flags);
4286 get_signals(info);
4287 spin_unlock_irqrestore(&info->lock, flags);
4288 hdlc_set_carrier(info->serial_signals & SerialSignal_DCD, dev);
4289
4290 return 0;
4291}
4292
4293/**
4294 * called by network layer when interface is disabled
4295 * shutdown hardware and release resources
4296 *
4297 * dev pointer to network device structure
4298 *
4299 * returns 0 if success, otherwise error code
4300 */
4301static int hdlcdev_close(struct net_device *dev)
4302{
4303 MGSLPC_INFO *info = dev_to_port(dev);
4304 unsigned long flags;
4305
4306 if (debug_level >= DEBUG_LEVEL_INFO)
4307 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
4308
4309 netif_stop_queue(dev);
4310
4311 /* shutdown adapter and release resources */
4312 shutdown(info);
4313
4314 hdlc_close(dev);
4315
4316 spin_lock_irqsave(&info->netlock, flags);
4317 info->netcount=0;
4318 spin_unlock_irqrestore(&info->netlock, flags);
4319
4320 return 0;
4321}
4322
4323/**
4324 * called by network layer to process IOCTL call to network device
4325 *
4326 * dev pointer to network device structure
4327 * ifr pointer to network interface request structure
4328 * cmd IOCTL command code
4329 *
4330 * returns 0 if success, otherwise error code
4331 */
4332static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
4333{
4334 const size_t size = sizeof(sync_serial_settings);
4335 sync_serial_settings new_line;
4336 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
4337 MGSLPC_INFO *info = dev_to_port(dev);
4338 unsigned int flags;
4339
4340 if (debug_level >= DEBUG_LEVEL_INFO)
4341 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
4342
4343 /* return error if TTY interface open */
4344 if (info->count)
4345 return -EBUSY;
4346
4347 if (cmd != SIOCWANDEV)
4348 return hdlc_ioctl(dev, ifr, cmd);
4349
4350 switch(ifr->ifr_settings.type) {
4351 case IF_GET_IFACE: /* return current sync_serial_settings */
4352
4353 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
4354 if (ifr->ifr_settings.size < size) {
4355 ifr->ifr_settings.size = size; /* data size wanted */
4356 return -ENOBUFS;
4357 }
4358
4359 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4360 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
4361 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4362 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
4363
4364 switch (flags){
4365 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
4366 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
4367 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
4368 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
4369 default: new_line.clock_type = CLOCK_DEFAULT;
4370 }
4371
4372 new_line.clock_rate = info->params.clock_speed;
4373 new_line.loopback = info->params.loopback ? 1:0;
4374
4375 if (copy_to_user(line, &new_line, size))
4376 return -EFAULT;
4377 return 0;
4378
4379 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
4380
4381 if(!capable(CAP_NET_ADMIN))
4382 return -EPERM;
4383 if (copy_from_user(&new_line, line, size))
4384 return -EFAULT;
4385
4386 switch (new_line.clock_type)
4387 {
4388 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
4389 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
4390 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
4391 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
4392 case CLOCK_DEFAULT: flags = info->params.flags &
4393 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4394 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
4395 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4396 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
4397 default: return -EINVAL;
4398 }
4399
4400 if (new_line.loopback != 0 && new_line.loopback != 1)
4401 return -EINVAL;
4402
4403 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4404 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
4405 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4406 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
4407 info->params.flags |= flags;
4408
4409 info->params.loopback = new_line.loopback;
4410
4411 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
4412 info->params.clock_speed = new_line.clock_rate;
4413 else
4414 info->params.clock_speed = 0;
4415
4416 /* if network interface up, reprogram hardware */
4417 if (info->netcount)
4418 mgslpc_program_hw(info);
4419 return 0;
4420
4421 default:
4422 return hdlc_ioctl(dev, ifr, cmd);
4423 }
4424}
4425
4426/**
4427 * called by network layer when transmit timeout is detected
4428 *
4429 * dev pointer to network device structure
4430 */
4431static void hdlcdev_tx_timeout(struct net_device *dev)
4432{
4433 MGSLPC_INFO *info = dev_to_port(dev);
4434 struct net_device_stats *stats = hdlc_stats(dev);
4435 unsigned long flags;
4436
4437 if (debug_level >= DEBUG_LEVEL_INFO)
4438 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
4439
4440 stats->tx_errors++;
4441 stats->tx_aborted_errors++;
4442
4443 spin_lock_irqsave(&info->lock,flags);
4444 tx_stop(info);
4445 spin_unlock_irqrestore(&info->lock,flags);
4446
4447 netif_wake_queue(dev);
4448}
4449
4450/**
4451 * called by device driver when transmit completes
4452 * reenable network layer transmit if stopped
4453 *
4454 * info pointer to device instance information
4455 */
4456static void hdlcdev_tx_done(MGSLPC_INFO *info)
4457{
4458 if (netif_queue_stopped(info->netdev))
4459 netif_wake_queue(info->netdev);
4460}
4461
4462/**
4463 * called by device driver when frame received
4464 * pass frame to network layer
4465 *
4466 * info pointer to device instance information
4467 * buf pointer to buffer contianing frame data
4468 * size count of data bytes in buf
4469 */
4470static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
4471{
4472 struct sk_buff *skb = dev_alloc_skb(size);
4473 struct net_device *dev = info->netdev;
4474 struct net_device_stats *stats = hdlc_stats(dev);
4475
4476 if (debug_level >= DEBUG_LEVEL_INFO)
4477 printk("hdlcdev_rx(%s)\n",dev->name);
4478
4479 if (skb == NULL) {
4480 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
4481 stats->rx_dropped++;
4482 return;
4483 }
4484
4485 memcpy(skb_put(skb, size),buf,size);
4486
4487 skb->protocol = hdlc_type_trans(skb, info->netdev);
4488
4489 stats->rx_packets++;
4490 stats->rx_bytes += size;
4491
4492 netif_rx(skb);
4493
4494 info->netdev->last_rx = jiffies;
4495}
4496
4497/**
4498 * called by device driver when adding device instance
4499 * do generic HDLC initialization
4500 *
4501 * info pointer to device instance information
4502 *
4503 * returns 0 if success, otherwise error code
4504 */
4505static int hdlcdev_init(MGSLPC_INFO *info)
4506{
4507 int rc;
4508 struct net_device *dev;
4509 hdlc_device *hdlc;
4510
4511 /* allocate and initialize network and HDLC layer objects */
4512
4513 if (!(dev = alloc_hdlcdev(info))) {
4514 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
4515 return -ENOMEM;
4516 }
4517
4518 /* for network layer reporting purposes only */
4519 dev->base_addr = info->io_base;
4520 dev->irq = info->irq_level;
4521
4522 /* network layer callbacks and settings */
4523 dev->do_ioctl = hdlcdev_ioctl;
4524 dev->open = hdlcdev_open;
4525 dev->stop = hdlcdev_close;
4526 dev->tx_timeout = hdlcdev_tx_timeout;
4527 dev->watchdog_timeo = 10*HZ;
4528 dev->tx_queue_len = 50;
4529
4530 /* generic HDLC layer callbacks and settings */
4531 hdlc = dev_to_hdlc(dev);
4532 hdlc->attach = hdlcdev_attach;
4533 hdlc->xmit = hdlcdev_xmit;
4534
4535 /* register objects with HDLC layer */
4536 if ((rc = register_hdlc_device(dev))) {
4537 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
4538 free_netdev(dev);
4539 return rc;
4540 }
4541
4542 info->netdev = dev;
4543 return 0;
4544}
4545
4546/**
4547 * called by device driver when removing device instance
4548 * do generic HDLC cleanup
4549 *
4550 * info pointer to device instance information
4551 */
4552static void hdlcdev_exit(MGSLPC_INFO *info)
4553{
4554 unregister_hdlc_device(info->netdev);
4555 free_netdev(info->netdev);
4556 info->netdev = NULL;
4557}
4558
4559#endif /* CONFIG_HDLC */
4560