| //===- ARMInstrInfo.td - Target Description for ARM Target -*- tablegen -*-===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file describes the ARM instructions in TableGen format. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // ARM specific DAG Nodes. |
| // |
| |
| // Type profiles. |
| def SDT_ARMCallSeqStart : SDCallSeqStart<[ SDTCisVT<0, i32> ]>; |
| def SDT_ARMCallSeqEnd : SDCallSeqEnd<[ SDTCisVT<0, i32>, SDTCisVT<1, i32> ]>; |
| |
| def SDT_ARMSaveCallPC : SDTypeProfile<0, 1, []>; |
| |
| def SDT_ARMcall : SDTypeProfile<0, -1, [SDTCisInt<0>]>; |
| |
| def SDT_ARMCMov : SDTypeProfile<1, 3, |
| [SDTCisSameAs<0, 1>, SDTCisSameAs<0, 2>, |
| SDTCisVT<3, i32>]>; |
| |
| def SDT_ARMBrcond : SDTypeProfile<0, 2, |
| [SDTCisVT<0, OtherVT>, SDTCisVT<1, i32>]>; |
| |
| def SDT_ARMBrJT : SDTypeProfile<0, 3, |
| [SDTCisPtrTy<0>, SDTCisVT<1, i32>, |
| SDTCisVT<2, i32>]>; |
| |
| def SDT_ARMCmp : SDTypeProfile<0, 2, [SDTCisSameAs<0, 1>]>; |
| |
| def SDT_ARMPICAdd : SDTypeProfile<1, 2, [SDTCisSameAs<0, 1>, |
| SDTCisPtrTy<1>, SDTCisVT<2, i32>]>; |
| |
| def SDT_ARMThreadPointer : SDTypeProfile<1, 0, [SDTCisPtrTy<0>]>; |
| |
| // Node definitions. |
| def ARMWrapper : SDNode<"ARMISD::Wrapper", SDTIntUnaryOp>; |
| def ARMWrapperJT : SDNode<"ARMISD::WrapperJT", SDTIntBinOp>; |
| |
| def ARMcallseq_start : SDNode<"ISD::CALLSEQ_START", SDT_ARMCallSeqStart, |
| [SDNPHasChain, SDNPOutFlag]>; |
| def ARMcallseq_end : SDNode<"ISD::CALLSEQ_END", SDT_ARMCallSeqEnd, |
| [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>; |
| |
| def ARMcall : SDNode<"ARMISD::CALL", SDT_ARMcall, |
| [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>; |
| def ARMcall_pred : SDNode<"ARMISD::CALL_PRED", SDT_ARMcall, |
| [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>; |
| def ARMcall_nolink : SDNode<"ARMISD::CALL_NOLINK", SDT_ARMcall, |
| [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>; |
| |
| def ARMretflag : SDNode<"ARMISD::RET_FLAG", SDTNone, |
| [SDNPHasChain, SDNPOptInFlag]>; |
| |
| def ARMcmov : SDNode<"ARMISD::CMOV", SDT_ARMCMov, |
| [SDNPInFlag]>; |
| def ARMcneg : SDNode<"ARMISD::CNEG", SDT_ARMCMov, |
| [SDNPInFlag]>; |
| |
| def ARMbrcond : SDNode<"ARMISD::BRCOND", SDT_ARMBrcond, |
| [SDNPHasChain, SDNPInFlag, SDNPOutFlag]>; |
| |
| def ARMbrjt : SDNode<"ARMISD::BR_JT", SDT_ARMBrJT, |
| [SDNPHasChain]>; |
| |
| def ARMcmp : SDNode<"ARMISD::CMP", SDT_ARMCmp, |
| [SDNPOutFlag]>; |
| |
| def ARMcmpNZ : SDNode<"ARMISD::CMPNZ", SDT_ARMCmp, |
| [SDNPOutFlag]>; |
| |
| def ARMpic_add : SDNode<"ARMISD::PIC_ADD", SDT_ARMPICAdd>; |
| |
| def ARMsrl_flag : SDNode<"ARMISD::SRL_FLAG", SDTIntUnaryOp, [SDNPOutFlag]>; |
| def ARMsra_flag : SDNode<"ARMISD::SRA_FLAG", SDTIntUnaryOp, [SDNPOutFlag]>; |
| def ARMrrx : SDNode<"ARMISD::RRX" , SDTIntUnaryOp, [SDNPInFlag ]>; |
| |
| def ARMthread_pointer: SDNode<"ARMISD::THREAD_POINTER", SDT_ARMThreadPointer>; |
| |
| //===----------------------------------------------------------------------===// |
| // ARM Instruction Predicate Definitions. |
| // |
| def HasV5T : Predicate<"Subtarget->hasV5TOps()">; |
| def HasV5TE : Predicate<"Subtarget->hasV5TEOps()">; |
| def HasV6 : Predicate<"Subtarget->hasV6Ops()">; |
| def IsThumb : Predicate<"Subtarget->isThumb()">; |
| def IsARM : Predicate<"!Subtarget->isThumb()">; |
| |
| //===----------------------------------------------------------------------===// |
| // ARM Flag Definitions. |
| |
| class RegConstraint<string C> { |
| string Constraints = C; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // ARM specific transformation functions and pattern fragments. |
| // |
| |
| // so_imm_XFORM - Return a so_imm value packed into the format described for |
| // so_imm def below. |
| def so_imm_XFORM : SDNodeXForm<imm, [{ |
| return CurDAG->getTargetConstant(ARM_AM::getSOImmVal(N->getZExtValue()), |
| MVT::i32); |
| }]>; |
| |
| // so_imm_neg_XFORM - Return a so_imm value packed into the format described for |
| // so_imm_neg def below. |
| def so_imm_neg_XFORM : SDNodeXForm<imm, [{ |
| return CurDAG->getTargetConstant(ARM_AM::getSOImmVal(-(int)N->getZExtValue()), |
| MVT::i32); |
| }]>; |
| |
| // so_imm_not_XFORM - Return a so_imm value packed into the format described for |
| // so_imm_not def below. |
| def so_imm_not_XFORM : SDNodeXForm<imm, [{ |
| return CurDAG->getTargetConstant(ARM_AM::getSOImmVal(~(int)N->getZExtValue()), |
| MVT::i32); |
| }]>; |
| |
| // rot_imm predicate - True if the 32-bit immediate is equal to 8, 16, or 24. |
| def rot_imm : PatLeaf<(i32 imm), [{ |
| int32_t v = (int32_t)N->getZExtValue(); |
| return v == 8 || v == 16 || v == 24; |
| }]>; |
| |
| /// imm1_15 predicate - True if the 32-bit immediate is in the range [1,15]. |
| def imm1_15 : PatLeaf<(i32 imm), [{ |
| return (int32_t)N->getZExtValue() >= 1 && (int32_t)N->getZExtValue() < 16; |
| }]>; |
| |
| /// imm16_31 predicate - True if the 32-bit immediate is in the range [16,31]. |
| def imm16_31 : PatLeaf<(i32 imm), [{ |
| return (int32_t)N->getZExtValue() >= 16 && (int32_t)N->getZExtValue() < 32; |
| }]>; |
| |
| def so_imm_neg : |
| PatLeaf<(imm), [{ |
| return ARM_AM::getSOImmVal(-(int)N->getZExtValue()) != -1; |
| }], so_imm_neg_XFORM>; |
| |
| def so_imm_not : |
| PatLeaf<(imm), [{ |
| return ARM_AM::getSOImmVal(~(int)N->getZExtValue()) != -1; |
| }], so_imm_not_XFORM>; |
| |
| // sext_16_node predicate - True if the SDNode is sign-extended 16 or more bits. |
| def sext_16_node : PatLeaf<(i32 GPR:$a), [{ |
| return CurDAG->ComputeNumSignBits(SDValue(N,0)) >= 17; |
| }]>; |
| |
| class BinOpFrag<dag res> : PatFrag<(ops node:$LHS, node:$RHS), res>; |
| class UnOpFrag <dag res> : PatFrag<(ops node:$Src), res>; |
| |
| //===----------------------------------------------------------------------===// |
| // Operand Definitions. |
| // |
| |
| // Branch target. |
| def brtarget : Operand<OtherVT>; |
| |
| // A list of registers separated by comma. Used by load/store multiple. |
| def reglist : Operand<i32> { |
| let PrintMethod = "printRegisterList"; |
| } |
| |
| // An operand for the CONSTPOOL_ENTRY pseudo-instruction. |
| def cpinst_operand : Operand<i32> { |
| let PrintMethod = "printCPInstOperand"; |
| } |
| |
| def jtblock_operand : Operand<i32> { |
| let PrintMethod = "printJTBlockOperand"; |
| } |
| |
| // Local PC labels. |
| def pclabel : Operand<i32> { |
| let PrintMethod = "printPCLabel"; |
| } |
| |
| // shifter_operand operands: so_reg and so_imm. |
| def so_reg : Operand<i32>, // reg reg imm |
| ComplexPattern<i32, 3, "SelectShifterOperandReg", |
| [shl,srl,sra,rotr]> { |
| let PrintMethod = "printSORegOperand"; |
| let MIOperandInfo = (ops GPR, GPR, i32imm); |
| } |
| |
| // so_imm - Match a 32-bit shifter_operand immediate operand, which is an |
| // 8-bit immediate rotated by an arbitrary number of bits. so_imm values are |
| // represented in the imm field in the same 12-bit form that they are encoded |
| // into so_imm instructions: the 8-bit immediate is the least significant bits |
| // [bits 0-7], the 4-bit shift amount is the next 4 bits [bits 8-11]. |
| def so_imm : Operand<i32>, |
| PatLeaf<(imm), |
| [{ return ARM_AM::getSOImmVal(N->getZExtValue()) != -1; }], |
| so_imm_XFORM> { |
| let PrintMethod = "printSOImmOperand"; |
| } |
| |
| // Break so_imm's up into two pieces. This handles immediates with up to 16 |
| // bits set in them. This uses so_imm2part to match and so_imm2part_[12] to |
| // get the first/second pieces. |
| def so_imm2part : Operand<i32>, |
| PatLeaf<(imm), [{ |
| return ARM_AM::isSOImmTwoPartVal((unsigned)N->getZExtValue()); |
| }]> { |
| let PrintMethod = "printSOImm2PartOperand"; |
| } |
| |
| def so_imm2part_1 : SDNodeXForm<imm, [{ |
| unsigned V = ARM_AM::getSOImmTwoPartFirst((unsigned)N->getZExtValue()); |
| return CurDAG->getTargetConstant(ARM_AM::getSOImmVal(V), MVT::i32); |
| }]>; |
| |
| def so_imm2part_2 : SDNodeXForm<imm, [{ |
| unsigned V = ARM_AM::getSOImmTwoPartSecond((unsigned)N->getZExtValue()); |
| return CurDAG->getTargetConstant(ARM_AM::getSOImmVal(V), MVT::i32); |
| }]>; |
| |
| |
| // Define ARM specific addressing modes. |
| |
| // addrmode2 := reg +/- reg shop imm |
| // addrmode2 := reg +/- imm12 |
| // |
| def addrmode2 : Operand<i32>, |
| ComplexPattern<i32, 3, "SelectAddrMode2", []> { |
| let PrintMethod = "printAddrMode2Operand"; |
| let MIOperandInfo = (ops GPR:$base, GPR:$offsreg, i32imm:$offsimm); |
| } |
| |
| def am2offset : Operand<i32>, |
| ComplexPattern<i32, 2, "SelectAddrMode2Offset", []> { |
| let PrintMethod = "printAddrMode2OffsetOperand"; |
| let MIOperandInfo = (ops GPR, i32imm); |
| } |
| |
| // addrmode3 := reg +/- reg |
| // addrmode3 := reg +/- imm8 |
| // |
| def addrmode3 : Operand<i32>, |
| ComplexPattern<i32, 3, "SelectAddrMode3", []> { |
| let PrintMethod = "printAddrMode3Operand"; |
| let MIOperandInfo = (ops GPR:$base, GPR:$offsreg, i32imm:$offsimm); |
| } |
| |
| def am3offset : Operand<i32>, |
| ComplexPattern<i32, 2, "SelectAddrMode3Offset", []> { |
| let PrintMethod = "printAddrMode3OffsetOperand"; |
| let MIOperandInfo = (ops GPR, i32imm); |
| } |
| |
| // addrmode4 := reg, <mode|W> |
| // |
| def addrmode4 : Operand<i32>, |
| ComplexPattern<i32, 2, "", []> { |
| let PrintMethod = "printAddrMode4Operand"; |
| let MIOperandInfo = (ops GPR, i32imm); |
| } |
| |
| // addrmode5 := reg +/- imm8*4 |
| // |
| def addrmode5 : Operand<i32>, |
| ComplexPattern<i32, 2, "SelectAddrMode5", []> { |
| let PrintMethod = "printAddrMode5Operand"; |
| let MIOperandInfo = (ops GPR, i32imm); |
| } |
| |
| // addrmodepc := pc + reg |
| // |
| def addrmodepc : Operand<i32>, |
| ComplexPattern<i32, 2, "SelectAddrModePC", []> { |
| let PrintMethod = "printAddrModePCOperand"; |
| let MIOperandInfo = (ops GPR, i32imm); |
| } |
| |
| // ARM Predicate operand. Default to 14 = always (AL). Second part is CC |
| // register whose default is 0 (no register). |
| def pred : PredicateOperand<OtherVT, (ops i32imm, CCR), |
| (ops (i32 14), (i32 zero_reg))> { |
| let PrintMethod = "printPredicateOperand"; |
| } |
| |
| // Conditional code result for instructions whose 's' bit is set, e.g. subs. |
| // |
| def cc_out : OptionalDefOperand<OtherVT, (ops CCR), (ops (i32 zero_reg))> { |
| let PrintMethod = "printSBitModifierOperand"; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // ARM Instruction flags. These need to match ARMInstrInfo.h. |
| // |
| |
| // Addressing mode. |
| class AddrMode<bits<4> val> { |
| bits<4> Value = val; |
| } |
| def AddrModeNone : AddrMode<0>; |
| def AddrMode1 : AddrMode<1>; |
| def AddrMode2 : AddrMode<2>; |
| def AddrMode3 : AddrMode<3>; |
| def AddrMode4 : AddrMode<4>; |
| def AddrMode5 : AddrMode<5>; |
| def AddrModeT1 : AddrMode<6>; |
| def AddrModeT2 : AddrMode<7>; |
| def AddrModeT4 : AddrMode<8>; |
| def AddrModeTs : AddrMode<9>; |
| |
| // Instruction size. |
| class SizeFlagVal<bits<3> val> { |
| bits<3> Value = val; |
| } |
| def SizeInvalid : SizeFlagVal<0>; // Unset. |
| def SizeSpecial : SizeFlagVal<1>; // Pseudo or special. |
| def Size8Bytes : SizeFlagVal<2>; |
| def Size4Bytes : SizeFlagVal<3>; |
| def Size2Bytes : SizeFlagVal<4>; |
| |
| // Load / store index mode. |
| class IndexMode<bits<2> val> { |
| bits<2> Value = val; |
| } |
| def IndexModeNone : IndexMode<0>; |
| def IndexModePre : IndexMode<1>; |
| def IndexModePost : IndexMode<2>; |
| |
| //===----------------------------------------------------------------------===// |
| |
| include "ARMInstrFormats.td" |
| |
| //===----------------------------------------------------------------------===// |
| // Multiclass helpers... |
| // |
| |
| /// AsI1_bin_irs - Defines a set of (op r, {so_imm|r|so_reg}) patterns for a |
| /// binop that produces a value. |
| multiclass AsI1_bin_irs<bits<4> opcod, string opc, PatFrag opnode> { |
| def ri : AsI1<opcod, (outs GPR:$dst), (ins GPR:$a, so_imm:$b), DPFrm, |
| opc, " $dst, $a, $b", |
| [(set GPR:$dst, (opnode GPR:$a, so_imm:$b))]>; |
| def rr : AsI1<opcod, (outs GPR:$dst), (ins GPR:$a, GPR:$b), DPFrm, |
| opc, " $dst, $a, $b", |
| [(set GPR:$dst, (opnode GPR:$a, GPR:$b))]>; |
| def rs : AsI1<opcod, (outs GPR:$dst), (ins GPR:$a, so_reg:$b), DPSoRegFrm, |
| opc, " $dst, $a, $b", |
| [(set GPR:$dst, (opnode GPR:$a, so_reg:$b))]>; |
| } |
| |
| /// ASI1_bin_s_irs - Similar to AsI1_bin_irs except it sets the 's' bit so the |
| /// instruction modifies the CSPR register. |
| let Defs = [CPSR] in { |
| multiclass ASI1_bin_s_irs<bits<4> opcod, string opc, PatFrag opnode> { |
| def ri : AI1<opcod, (outs GPR:$dst), (ins GPR:$a, so_imm:$b), DPFrm, |
| opc, "s $dst, $a, $b", |
| [(set GPR:$dst, (opnode GPR:$a, so_imm:$b))]>; |
| def rr : AI1<opcod, (outs GPR:$dst), (ins GPR:$a, GPR:$b), DPFrm, |
| opc, "s $dst, $a, $b", |
| [(set GPR:$dst, (opnode GPR:$a, GPR:$b))]>; |
| def rs : AI1<opcod, (outs GPR:$dst), (ins GPR:$a, so_reg:$b), DPSoRegFrm, |
| opc, "s $dst, $a, $b", |
| [(set GPR:$dst, (opnode GPR:$a, so_reg:$b))]>; |
| } |
| } |
| |
| /// AI1_cmp_irs - Defines a set of (op r, {so_imm|r|so_reg}) cmp / test |
| /// patterns. Similar to AsI1_bin_irs except the instruction does not produce |
| /// a explicit result, only implicitly set CPSR. |
| let Defs = [CPSR] in { |
| multiclass AI1_cmp_irs<bits<4> opcod, string opc, PatFrag opnode> { |
| def ri : AI1<opcod, (outs), (ins GPR:$a, so_imm:$b), DPFrm, |
| opc, " $a, $b", |
| [(opnode GPR:$a, so_imm:$b)]>; |
| def rr : AI1<opcod, (outs), (ins GPR:$a, GPR:$b), DPFrm, |
| opc, " $a, $b", |
| [(opnode GPR:$a, GPR:$b)]>; |
| def rs : AI1<opcod, (outs), (ins GPR:$a, so_reg:$b), DPSoRegFrm, |
| opc, " $a, $b", |
| [(opnode GPR:$a, so_reg:$b)]>; |
| } |
| } |
| |
| /// AI_unary_rrot - A unary operation with two forms: one whose operand is a |
| /// register and one whose operand is a register rotated by 8/16/24. |
| /// FIXME: Remove the 'r' variant. Its rot_imm is zero. |
| multiclass AI_unary_rrot<bits<8> opcod, string opc, PatFrag opnode> { |
| def r : AExtI<opcod, (outs GPR:$dst), (ins GPR:$Src), |
| opc, " $dst, $Src", |
| [(set GPR:$dst, (opnode GPR:$Src))]>, |
| Requires<[IsARM, HasV6]> { |
| let Inst{19-16} = 0b1111; |
| } |
| def r_rot : AExtI<opcod, (outs GPR:$dst), (ins GPR:$Src, i32imm:$rot), |
| opc, " $dst, $Src, ror $rot", |
| [(set GPR:$dst, (opnode (rotr GPR:$Src, rot_imm:$rot)))]>, |
| Requires<[IsARM, HasV6]> { |
| let Inst{19-16} = 0b1111; |
| } |
| } |
| |
| /// AI_bin_rrot - A binary operation with two forms: one whose operand is a |
| /// register and one whose operand is a register rotated by 8/16/24. |
| multiclass AI_bin_rrot<bits<8> opcod, string opc, PatFrag opnode> { |
| def rr : AExtI<opcod, (outs GPR:$dst), (ins GPR:$LHS, GPR:$RHS), |
| opc, " $dst, $LHS, $RHS", |
| [(set GPR:$dst, (opnode GPR:$LHS, GPR:$RHS))]>, |
| Requires<[IsARM, HasV6]>; |
| def rr_rot : AExtI<opcod, (outs GPR:$dst), (ins GPR:$LHS, GPR:$RHS, i32imm:$rot), |
| opc, " $dst, $LHS, $RHS, ror $rot", |
| [(set GPR:$dst, (opnode GPR:$LHS, |
| (rotr GPR:$RHS, rot_imm:$rot)))]>, |
| Requires<[IsARM, HasV6]>; |
| } |
| |
| /// AsXI1_bin_c_irs - Same as AsI1_bin_irs but without the predicate operand and |
| /// setting carry bit. But it can optionally set CPSR. |
| let Uses = [CPSR] in { |
| multiclass AsXI1_bin_c_irs<bits<4> opcod, string opc, PatFrag opnode> { |
| def ri : AXI1<opcod, (outs GPR:$dst), (ins GPR:$a, so_imm:$b, cc_out:$s), |
| DPFrm, !strconcat(opc, "${s} $dst, $a, $b"), |
| [(set GPR:$dst, (opnode GPR:$a, so_imm:$b))]>; |
| def rr : AXI1<opcod, (outs GPR:$dst), (ins GPR:$a, GPR:$b, cc_out:$s), |
| DPFrm, !strconcat(opc, "${s} $dst, $a, $b"), |
| [(set GPR:$dst, (opnode GPR:$a, GPR:$b))]>; |
| def rs : AXI1<opcod, (outs GPR:$dst), (ins GPR:$a, so_reg:$b, cc_out:$s), |
| DPSoRegFrm, !strconcat(opc, "${s} $dst, $a, $b"), |
| [(set GPR:$dst, (opnode GPR:$a, so_reg:$b))]>; |
| } |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Instructions |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // Miscellaneous Instructions. |
| // |
| |
| /// CONSTPOOL_ENTRY - This instruction represents a floating constant pool in |
| /// the function. The first operand is the ID# for this instruction, the second |
| /// is the index into the MachineConstantPool that this is, the third is the |
| /// size in bytes of this constant pool entry. |
| let isNotDuplicable = 1 in |
| def CONSTPOOL_ENTRY : |
| PseudoInst<(outs), (ins cpinst_operand:$instid, cpinst_operand:$cpidx, |
| i32imm:$size), |
| "${instid:label} ${cpidx:cpentry}", []>; |
| |
| let Defs = [SP], Uses = [SP] in { |
| def ADJCALLSTACKUP : |
| PseudoInst<(outs), (ins i32imm:$amt1, i32imm:$amt2, pred:$p), |
| "@ ADJCALLSTACKUP $amt1", |
| [(ARMcallseq_end timm:$amt1, timm:$amt2)]>; |
| |
| def ADJCALLSTACKDOWN : |
| PseudoInst<(outs), (ins i32imm:$amt, pred:$p), |
| "@ ADJCALLSTACKDOWN $amt", |
| [(ARMcallseq_start timm:$amt)]>; |
| } |
| |
| def DWARF_LOC : |
| PseudoInst<(outs), (ins i32imm:$line, i32imm:$col, i32imm:$file), |
| ".loc $file, $line, $col", |
| [(dwarf_loc (i32 imm:$line), (i32 imm:$col), (i32 imm:$file))]>; |
| |
| |
| // Address computation and loads and stores in PIC mode. |
| let isNotDuplicable = 1 in { |
| def PICADD : AXI1<0b0100, (outs GPR:$dst), (ins GPR:$a, pclabel:$cp, pred:$p), |
| Pseudo, "$cp:\n\tadd$p $dst, pc, $a", |
| [(set GPR:$dst, (ARMpic_add GPR:$a, imm:$cp))]>; |
| |
| let AddedComplexity = 10 in { |
| let canFoldAsLoad = 1 in |
| def PICLDR : AXI2ldw<(outs GPR:$dst), (ins addrmodepc:$addr, pred:$p), |
| Pseudo, "${addr:label}:\n\tldr$p $dst, $addr", |
| [(set GPR:$dst, (load addrmodepc:$addr))]>; |
| |
| def PICLDRH : AXI3ldh<(outs GPR:$dst), (ins addrmodepc:$addr, pred:$p), |
| Pseudo, "${addr:label}:\n\tldr${p}h $dst, $addr", |
| [(set GPR:$dst, (zextloadi16 addrmodepc:$addr))]>; |
| |
| def PICLDRB : AXI2ldb<(outs GPR:$dst), (ins addrmodepc:$addr, pred:$p), |
| Pseudo, "${addr:label}:\n\tldr${p}b $dst, $addr", |
| [(set GPR:$dst, (zextloadi8 addrmodepc:$addr))]>; |
| |
| def PICLDRSH : AXI3ldsh<(outs GPR:$dst), (ins addrmodepc:$addr, pred:$p), |
| Pseudo, "${addr:label}:\n\tldr${p}sh $dst, $addr", |
| [(set GPR:$dst, (sextloadi16 addrmodepc:$addr))]>; |
| |
| def PICLDRSB : AXI3ldsb<(outs GPR:$dst), (ins addrmodepc:$addr, pred:$p), |
| Pseudo, "${addr:label}:\n\tldr${p}sb $dst, $addr", |
| [(set GPR:$dst, (sextloadi8 addrmodepc:$addr))]>; |
| } |
| let AddedComplexity = 10 in { |
| def PICSTR : AXI2stw<(outs), (ins GPR:$src, addrmodepc:$addr, pred:$p), |
| Pseudo, "${addr:label}:\n\tstr$p $src, $addr", |
| [(store GPR:$src, addrmodepc:$addr)]>; |
| |
| def PICSTRH : AXI3sth<(outs), (ins GPR:$src, addrmodepc:$addr, pred:$p), |
| Pseudo, "${addr:label}:\n\tstr${p}h $src, $addr", |
| [(truncstorei16 GPR:$src, addrmodepc:$addr)]>; |
| |
| def PICSTRB : AXI2stb<(outs), (ins GPR:$src, addrmodepc:$addr, pred:$p), |
| Pseudo, "${addr:label}:\n\tstr${p}b $src, $addr", |
| [(truncstorei8 GPR:$src, addrmodepc:$addr)]>; |
| } |
| } // isNotDuplicable = 1 |
| |
| //===----------------------------------------------------------------------===// |
| // Control Flow Instructions. |
| // |
| |
| let isReturn = 1, isTerminator = 1 in |
| def BX_RET : AI<(outs), (ins), BrMiscFrm, "bx", " lr", [(ARMretflag)]> { |
| let Inst{7-4} = 0b0001; |
| let Inst{19-8} = 0b111111111111; |
| let Inst{27-20} = 0b00010010; |
| } |
| |
| // FIXME: remove when we have a way to marking a MI with these properties. |
| // FIXME: $dst1 should be a def. But the extra ops must be in the end of the |
| // operand list. |
| // FIXME: Should pc be an implicit operand like PICADD, etc? |
| let isReturn = 1, isTerminator = 1 in |
| def LDM_RET : AXI4ld<(outs), |
| (ins addrmode4:$addr, pred:$p, reglist:$dst1, variable_ops), |
| LdStMulFrm, "ldm${p}${addr:submode} $addr, $dst1", |
| []>; |
| |
| let isCall = 1, |
| Defs = [R0, R1, R2, R3, R12, LR, |
| D0, D1, D2, D3, D4, D5, D6, D7, CPSR] in { |
| def BL : ABXI<0b1011, (outs), (ins i32imm:$func, variable_ops), |
| "bl ${func:call}", |
| [(ARMcall tglobaladdr:$func)]>; |
| |
| def BL_pred : ABI<0b1011, (outs), (ins i32imm:$func, variable_ops), |
| "bl", " ${func:call}", |
| [(ARMcall_pred tglobaladdr:$func)]>; |
| |
| // ARMv5T and above |
| def BLX : AXI<(outs), (ins GPR:$func, variable_ops), BrMiscFrm, |
| "blx $func", |
| [(ARMcall GPR:$func)]>, Requires<[IsARM, HasV5T]> { |
| let Inst{7-4} = 0b0011; |
| let Inst{19-8} = 0b111111111111; |
| let Inst{27-20} = 0b00010010; |
| } |
| |
| let Uses = [LR] in { |
| // ARMv4T |
| def BX : ABXIx2<(outs), (ins GPR:$func, variable_ops), |
| "mov lr, pc\n\tbx $func", |
| [(ARMcall_nolink GPR:$func)]>; |
| } |
| } |
| |
| let isBranch = 1, isTerminator = 1 in { |
| // B is "predicable" since it can be xformed into a Bcc. |
| let isBarrier = 1 in { |
| let isPredicable = 1 in |
| def B : ABXI<0b1010, (outs), (ins brtarget:$target), "b $target", |
| [(br bb:$target)]>; |
| |
| let isNotDuplicable = 1, isIndirectBranch = 1 in { |
| def BR_JTr : JTI<(outs), (ins GPR:$target, jtblock_operand:$jt, i32imm:$id), |
| "mov pc, $target \n$jt", |
| [(ARMbrjt GPR:$target, tjumptable:$jt, imm:$id)]> { |
| let Inst{20} = 0; // S Bit |
| let Inst{24-21} = 0b1101; |
| let Inst{27-26} = {0,0}; |
| } |
| def BR_JTm : JTI<(outs), |
| (ins addrmode2:$target, jtblock_operand:$jt, i32imm:$id), |
| "ldr pc, $target \n$jt", |
| [(ARMbrjt (i32 (load addrmode2:$target)), tjumptable:$jt, |
| imm:$id)]> { |
| let Inst{20} = 1; // L bit |
| let Inst{21} = 0; // W bit |
| let Inst{22} = 0; // B bit |
| let Inst{24} = 1; // P bit |
| let Inst{27-26} = {0,1}; |
| } |
| def BR_JTadd : JTI<(outs), |
| (ins GPR:$target, GPR:$idx, jtblock_operand:$jt, i32imm:$id), |
| "add pc, $target, $idx \n$jt", |
| [(ARMbrjt (add GPR:$target, GPR:$idx), tjumptable:$jt, |
| imm:$id)]> { |
| let Inst{20} = 0; // S bit |
| let Inst{24-21} = 0b0100; |
| let Inst{27-26} = {0,0}; |
| } |
| } // isNotDuplicable = 1, isIndirectBranch = 1 |
| } // isBarrier = 1 |
| |
| // FIXME: should be able to write a pattern for ARMBrcond, but can't use |
| // a two-value operand where a dag node expects two operands. :( |
| def Bcc : ABI<0b1010, (outs), (ins brtarget:$target), |
| "b", " $target", |
| [/*(ARMbrcond bb:$target, imm:$cc, CCR:$ccr)*/]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Load / store Instructions. |
| // |
| |
| // Load |
| let canFoldAsLoad = 1 in |
| def LDR : AI2ldw<(outs GPR:$dst), (ins addrmode2:$addr), LdFrm, |
| "ldr", " $dst, $addr", |
| [(set GPR:$dst, (load addrmode2:$addr))]>; |
| |
| // Special LDR for loads from non-pc-relative constpools. |
| let canFoldAsLoad = 1, mayLoad = 1, isReMaterializable = 1 in |
| def LDRcp : AI2ldw<(outs GPR:$dst), (ins addrmode2:$addr), LdFrm, |
| "ldr", " $dst, $addr", []>; |
| |
| // Loads with zero extension |
| def LDRH : AI3ldh<(outs GPR:$dst), (ins addrmode3:$addr), LdMiscFrm, |
| "ldr", "h $dst, $addr", |
| [(set GPR:$dst, (zextloadi16 addrmode3:$addr))]>; |
| |
| def LDRB : AI2ldb<(outs GPR:$dst), (ins addrmode2:$addr), LdFrm, |
| "ldr", "b $dst, $addr", |
| [(set GPR:$dst, (zextloadi8 addrmode2:$addr))]>; |
| |
| // Loads with sign extension |
| def LDRSH : AI3ldsh<(outs GPR:$dst), (ins addrmode3:$addr), LdMiscFrm, |
| "ldr", "sh $dst, $addr", |
| [(set GPR:$dst, (sextloadi16 addrmode3:$addr))]>; |
| |
| def LDRSB : AI3ldsb<(outs GPR:$dst), (ins addrmode3:$addr), LdMiscFrm, |
| "ldr", "sb $dst, $addr", |
| [(set GPR:$dst, (sextloadi8 addrmode3:$addr))]>; |
| |
| let mayLoad = 1 in { |
| // Load doubleword |
| def LDRD : AI3ldd<(outs GPR:$dst), (ins addrmode3:$addr), LdMiscFrm, |
| "ldr", "d $dst, $addr", |
| []>, Requires<[IsARM, HasV5T]>; |
| |
| // Indexed loads |
| def LDR_PRE : AI2ldwpr<(outs GPR:$dst, GPR:$base_wb), |
| (ins addrmode2:$addr), LdFrm, |
| "ldr", " $dst, $addr!", "$addr.base = $base_wb", []>; |
| |
| def LDR_POST : AI2ldwpo<(outs GPR:$dst, GPR:$base_wb), |
| (ins GPR:$base, am2offset:$offset), LdFrm, |
| "ldr", " $dst, [$base], $offset", "$base = $base_wb", []>; |
| |
| def LDRH_PRE : AI3ldhpr<(outs GPR:$dst, GPR:$base_wb), |
| (ins addrmode3:$addr), LdMiscFrm, |
| "ldr", "h $dst, $addr!", "$addr.base = $base_wb", []>; |
| |
| def LDRH_POST : AI3ldhpo<(outs GPR:$dst, GPR:$base_wb), |
| (ins GPR:$base,am3offset:$offset), LdMiscFrm, |
| "ldr", "h $dst, [$base], $offset", "$base = $base_wb", []>; |
| |
| def LDRB_PRE : AI2ldbpr<(outs GPR:$dst, GPR:$base_wb), |
| (ins addrmode2:$addr), LdFrm, |
| "ldr", "b $dst, $addr!", "$addr.base = $base_wb", []>; |
| |
| def LDRB_POST : AI2ldbpo<(outs GPR:$dst, GPR:$base_wb), |
| (ins GPR:$base,am2offset:$offset), LdFrm, |
| "ldr", "b $dst, [$base], $offset", "$base = $base_wb", []>; |
| |
| def LDRSH_PRE : AI3ldshpr<(outs GPR:$dst, GPR:$base_wb), |
| (ins addrmode3:$addr), LdMiscFrm, |
| "ldr", "sh $dst, $addr!", "$addr.base = $base_wb", []>; |
| |
| def LDRSH_POST: AI3ldshpo<(outs GPR:$dst, GPR:$base_wb), |
| (ins GPR:$base,am3offset:$offset), LdMiscFrm, |
| "ldr", "sh $dst, [$base], $offset", "$base = $base_wb", []>; |
| |
| def LDRSB_PRE : AI3ldsbpr<(outs GPR:$dst, GPR:$base_wb), |
| (ins addrmode3:$addr), LdMiscFrm, |
| "ldr", "sb $dst, $addr!", "$addr.base = $base_wb", []>; |
| |
| def LDRSB_POST: AI3ldsbpo<(outs GPR:$dst, GPR:$base_wb), |
| (ins GPR:$base,am3offset:$offset), LdMiscFrm, |
| "ldr", "sb $dst, [$base], $offset", "$base = $base_wb", []>; |
| } |
| |
| // Store |
| def STR : AI2stw<(outs), (ins GPR:$src, addrmode2:$addr), StFrm, |
| "str", " $src, $addr", |
| [(store GPR:$src, addrmode2:$addr)]>; |
| |
| // Stores with truncate |
| def STRH : AI3sth<(outs), (ins GPR:$src, addrmode3:$addr), StMiscFrm, |
| "str", "h $src, $addr", |
| [(truncstorei16 GPR:$src, addrmode3:$addr)]>; |
| |
| def STRB : AI2stb<(outs), (ins GPR:$src, addrmode2:$addr), StFrm, |
| "str", "b $src, $addr", |
| [(truncstorei8 GPR:$src, addrmode2:$addr)]>; |
| |
| // Store doubleword |
| let mayStore = 1 in |
| def STRD : AI3std<(outs), (ins GPR:$src, addrmode3:$addr), StMiscFrm, |
| "str", "d $src, $addr", |
| []>, Requires<[IsARM, HasV5T]>; |
| |
| // Indexed stores |
| def STR_PRE : AI2stwpr<(outs GPR:$base_wb), |
| (ins GPR:$src, GPR:$base, am2offset:$offset), StFrm, |
| "str", " $src, [$base, $offset]!", "$base = $base_wb", |
| [(set GPR:$base_wb, |
| (pre_store GPR:$src, GPR:$base, am2offset:$offset))]>; |
| |
| def STR_POST : AI2stwpo<(outs GPR:$base_wb), |
| (ins GPR:$src, GPR:$base,am2offset:$offset), StFrm, |
| "str", " $src, [$base], $offset", "$base = $base_wb", |
| [(set GPR:$base_wb, |
| (post_store GPR:$src, GPR:$base, am2offset:$offset))]>; |
| |
| def STRH_PRE : AI3sthpr<(outs GPR:$base_wb), |
| (ins GPR:$src, GPR:$base,am3offset:$offset), StMiscFrm, |
| "str", "h $src, [$base, $offset]!", "$base = $base_wb", |
| [(set GPR:$base_wb, |
| (pre_truncsti16 GPR:$src, GPR:$base,am3offset:$offset))]>; |
| |
| def STRH_POST: AI3sthpo<(outs GPR:$base_wb), |
| (ins GPR:$src, GPR:$base,am3offset:$offset), StMiscFrm, |
| "str", "h $src, [$base], $offset", "$base = $base_wb", |
| [(set GPR:$base_wb, (post_truncsti16 GPR:$src, |
| GPR:$base, am3offset:$offset))]>; |
| |
| def STRB_PRE : AI2stbpr<(outs GPR:$base_wb), |
| (ins GPR:$src, GPR:$base,am2offset:$offset), StFrm, |
| "str", "b $src, [$base, $offset]!", "$base = $base_wb", |
| [(set GPR:$base_wb, (pre_truncsti8 GPR:$src, |
| GPR:$base, am2offset:$offset))]>; |
| |
| def STRB_POST: AI2stbpo<(outs GPR:$base_wb), |
| (ins GPR:$src, GPR:$base,am2offset:$offset), StFrm, |
| "str", "b $src, [$base], $offset", "$base = $base_wb", |
| [(set GPR:$base_wb, (post_truncsti8 GPR:$src, |
| GPR:$base, am2offset:$offset))]>; |
| |
| //===----------------------------------------------------------------------===// |
| // Load / store multiple Instructions. |
| // |
| |
| // FIXME: $dst1 should be a def. |
| let mayLoad = 1 in |
| def LDM : AXI4ld<(outs), |
| (ins addrmode4:$addr, pred:$p, reglist:$dst1, variable_ops), |
| LdStMulFrm, "ldm${p}${addr:submode} $addr, $dst1", |
| []>; |
| |
| let mayStore = 1 in |
| def STM : AXI4st<(outs), |
| (ins addrmode4:$addr, pred:$p, reglist:$src1, variable_ops), |
| LdStMulFrm, "stm${p}${addr:submode} $addr, $src1", |
| []>; |
| |
| //===----------------------------------------------------------------------===// |
| // Move Instructions. |
| // |
| |
| def MOVr : AsI1<0b1101, (outs GPR:$dst), (ins GPR:$src), DPFrm, |
| "mov", " $dst, $src", []>, UnaryDP; |
| def MOVs : AsI1<0b1101, (outs GPR:$dst), (ins so_reg:$src), DPSoRegFrm, |
| "mov", " $dst, $src", [(set GPR:$dst, so_reg:$src)]>, UnaryDP; |
| |
| let isReMaterializable = 1, isAsCheapAsAMove = 1 in |
| def MOVi : AsI1<0b1101, (outs GPR:$dst), (ins so_imm:$src), DPFrm, |
| "mov", " $dst, $src", [(set GPR:$dst, so_imm:$src)]>, UnaryDP; |
| |
| def MOVrx : AsI1<0b1101, (outs GPR:$dst), (ins GPR:$src), Pseudo, |
| "mov", " $dst, $src, rrx", |
| [(set GPR:$dst, (ARMrrx GPR:$src))]>, UnaryDP; |
| |
| // These aren't really mov instructions, but we have to define them this way |
| // due to flag operands. |
| |
| let Defs = [CPSR] in { |
| def MOVsrl_flag : AI1<0b1101, (outs GPR:$dst), (ins GPR:$src), Pseudo, |
| "mov", "s $dst, $src, lsr #1", |
| [(set GPR:$dst, (ARMsrl_flag GPR:$src))]>, UnaryDP; |
| def MOVsra_flag : AI1<0b1101, (outs GPR:$dst), (ins GPR:$src), Pseudo, |
| "mov", "s $dst, $src, asr #1", |
| [(set GPR:$dst, (ARMsra_flag GPR:$src))]>, UnaryDP; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Extend Instructions. |
| // |
| |
| // Sign extenders |
| |
| defm SXTB : AI_unary_rrot<0b01101010, |
| "sxtb", UnOpFrag<(sext_inreg node:$Src, i8)>>; |
| defm SXTH : AI_unary_rrot<0b01101011, |
| "sxth", UnOpFrag<(sext_inreg node:$Src, i16)>>; |
| |
| defm SXTAB : AI_bin_rrot<0b01101010, |
| "sxtab", BinOpFrag<(add node:$LHS, (sext_inreg node:$RHS, i8))>>; |
| defm SXTAH : AI_bin_rrot<0b01101011, |
| "sxtah", BinOpFrag<(add node:$LHS, (sext_inreg node:$RHS,i16))>>; |
| |
| // TODO: SXT(A){B|H}16 |
| |
| // Zero extenders |
| |
| let AddedComplexity = 16 in { |
| defm UXTB : AI_unary_rrot<0b01101110, |
| "uxtb" , UnOpFrag<(and node:$Src, 0x000000FF)>>; |
| defm UXTH : AI_unary_rrot<0b01101111, |
| "uxth" , UnOpFrag<(and node:$Src, 0x0000FFFF)>>; |
| defm UXTB16 : AI_unary_rrot<0b01101100, |
| "uxtb16", UnOpFrag<(and node:$Src, 0x00FF00FF)>>; |
| |
| def : ARMV6Pat<(and (shl GPR:$Src, 8), 0xFF00FF), |
| (UXTB16r_rot GPR:$Src, 24)>; |
| def : ARMV6Pat<(and (srl GPR:$Src, 8), 0xFF00FF), |
| (UXTB16r_rot GPR:$Src, 8)>; |
| |
| defm UXTAB : AI_bin_rrot<0b01101110, "uxtab", |
| BinOpFrag<(add node:$LHS, (and node:$RHS, 0x00FF))>>; |
| defm UXTAH : AI_bin_rrot<0b01101111, "uxtah", |
| BinOpFrag<(add node:$LHS, (and node:$RHS, 0xFFFF))>>; |
| } |
| |
| // This isn't safe in general, the add is two 16-bit units, not a 32-bit add. |
| //defm UXTAB16 : xxx<"uxtab16", 0xff00ff>; |
| |
| // TODO: UXT(A){B|H}16 |
| |
| //===----------------------------------------------------------------------===// |
| // Arithmetic Instructions. |
| // |
| |
| defm ADD : AsI1_bin_irs<0b0100, "add", |
| BinOpFrag<(add node:$LHS, node:$RHS)>>; |
| defm SUB : AsI1_bin_irs<0b0010, "sub", |
| BinOpFrag<(sub node:$LHS, node:$RHS)>>; |
| |
| // ADD and SUB with 's' bit set. |
| defm ADDS : ASI1_bin_s_irs<0b0100, "add", |
| BinOpFrag<(addc node:$LHS, node:$RHS)>>; |
| defm SUBS : ASI1_bin_s_irs<0b0010, "sub", |
| BinOpFrag<(subc node:$LHS, node:$RHS)>>; |
| |
| // FIXME: Do not allow ADC / SBC to be predicated for now. |
| defm ADC : AsXI1_bin_c_irs<0b0101, "adc", |
| BinOpFrag<(adde node:$LHS, node:$RHS)>>; |
| defm SBC : AsXI1_bin_c_irs<0b0110, "sbc", |
| BinOpFrag<(sube node:$LHS, node:$RHS)>>; |
| |
| // These don't define reg/reg forms, because they are handled above. |
| def RSBri : AsI1<0b0011, (outs GPR:$dst), (ins GPR:$a, so_imm:$b), DPFrm, |
| "rsb", " $dst, $a, $b", |
| [(set GPR:$dst, (sub so_imm:$b, GPR:$a))]>; |
| |
| def RSBrs : AsI1<0b0011, (outs GPR:$dst), (ins GPR:$a, so_reg:$b), DPSoRegFrm, |
| "rsb", " $dst, $a, $b", |
| [(set GPR:$dst, (sub so_reg:$b, GPR:$a))]>; |
| |
| // RSB with 's' bit set. |
| let Defs = [CPSR] in { |
| def RSBSri : AI1<0b0011, (outs GPR:$dst), (ins GPR:$a, so_imm:$b), DPFrm, |
| "rsb", "s $dst, $a, $b", |
| [(set GPR:$dst, (subc so_imm:$b, GPR:$a))]>; |
| def RSBSrs : AI1<0b0011, (outs GPR:$dst), (ins GPR:$a, so_reg:$b), DPSoRegFrm, |
| "rsb", "s $dst, $a, $b", |
| [(set GPR:$dst, (subc so_reg:$b, GPR:$a))]>; |
| } |
| |
| // FIXME: Do not allow RSC to be predicated for now. But they can set CPSR. |
| let Uses = [CPSR] in { |
| def RSCri : AXI1<0b0111, (outs GPR:$dst), (ins GPR:$a, so_imm:$b, cc_out:$s), |
| DPFrm, "rsc${s} $dst, $a, $b", |
| [(set GPR:$dst, (sube so_imm:$b, GPR:$a))]>; |
| def RSCrs : AXI1<0b0111, (outs GPR:$dst), (ins GPR:$a, so_reg:$b, cc_out:$s), |
| DPSoRegFrm, "rsc${s} $dst, $a, $b", |
| [(set GPR:$dst, (sube so_reg:$b, GPR:$a))]>; |
| } |
| |
| // (sub X, imm) gets canonicalized to (add X, -imm). Match this form. |
| def : ARMPat<(add GPR:$src, so_imm_neg:$imm), |
| (SUBri GPR:$src, so_imm_neg:$imm)>; |
| |
| //def : ARMPat<(addc GPR:$src, so_imm_neg:$imm), |
| // (SUBSri GPR:$src, so_imm_neg:$imm)>; |
| //def : ARMPat<(adde GPR:$src, so_imm_neg:$imm), |
| // (SBCri GPR:$src, so_imm_neg:$imm)>; |
| |
| // Note: These are implemented in C++ code, because they have to generate |
| // ADD/SUBrs instructions, which use a complex pattern that a xform function |
| // cannot produce. |
| // (mul X, 2^n+1) -> (add (X << n), X) |
| // (mul X, 2^n-1) -> (rsb X, (X << n)) |
| |
| |
| //===----------------------------------------------------------------------===// |
| // Bitwise Instructions. |
| // |
| |
| defm AND : AsI1_bin_irs<0b0000, "and", |
| BinOpFrag<(and node:$LHS, node:$RHS)>>; |
| defm ORR : AsI1_bin_irs<0b1100, "orr", |
| BinOpFrag<(or node:$LHS, node:$RHS)>>; |
| defm EOR : AsI1_bin_irs<0b0001, "eor", |
| BinOpFrag<(xor node:$LHS, node:$RHS)>>; |
| defm BIC : AsI1_bin_irs<0b1110, "bic", |
| BinOpFrag<(and node:$LHS, (not node:$RHS))>>; |
| |
| def MVNr : AsI1<0b1111, (outs GPR:$dst), (ins GPR:$src), DPFrm, |
| "mvn", " $dst, $src", |
| [(set GPR:$dst, (not GPR:$src))]>, UnaryDP; |
| def MVNs : AsI1<0b1111, (outs GPR:$dst), (ins so_reg:$src), DPSoRegFrm, |
| "mvn", " $dst, $src", |
| [(set GPR:$dst, (not so_reg:$src))]>, UnaryDP; |
| let isReMaterializable = 1, isAsCheapAsAMove = 1 in |
| def MVNi : AsI1<0b1111, (outs GPR:$dst), (ins so_imm:$imm), DPFrm, |
| "mvn", " $dst, $imm", |
| [(set GPR:$dst, so_imm_not:$imm)]>,UnaryDP; |
| |
| def : ARMPat<(and GPR:$src, so_imm_not:$imm), |
| (BICri GPR:$src, so_imm_not:$imm)>; |
| |
| //===----------------------------------------------------------------------===// |
| // Multiply Instructions. |
| // |
| |
| def MUL : AsMul1I<0b0000000, (outs GPR:$dst), (ins GPR:$a, GPR:$b), |
| "mul", " $dst, $a, $b", |
| [(set GPR:$dst, (mul GPR:$a, GPR:$b))]>; |
| |
| def MLA : AsMul1I<0b0000001, (outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$c), |
| "mla", " $dst, $a, $b, $c", |
| [(set GPR:$dst, (add (mul GPR:$a, GPR:$b), GPR:$c))]>; |
| |
| // Extra precision multiplies with low / high results |
| def SMULL : AsMul1I<0b0000110, (outs GPR:$ldst, GPR:$hdst), |
| (ins GPR:$a, GPR:$b), |
| "smull", " $ldst, $hdst, $a, $b", []>; |
| |
| def UMULL : AsMul1I<0b0000100, (outs GPR:$ldst, GPR:$hdst), |
| (ins GPR:$a, GPR:$b), |
| "umull", " $ldst, $hdst, $a, $b", []>; |
| |
| // Multiply + accumulate |
| def SMLAL : AsMul1I<0b0000111, (outs GPR:$ldst, GPR:$hdst), |
| (ins GPR:$a, GPR:$b), |
| "smlal", " $ldst, $hdst, $a, $b", []>; |
| |
| def UMLAL : AsMul1I<0b0000101, (outs GPR:$ldst, GPR:$hdst), |
| (ins GPR:$a, GPR:$b), |
| "umlal", " $ldst, $hdst, $a, $b", []>; |
| |
| def UMAAL : AMul1I <0b0000010, (outs GPR:$ldst, GPR:$hdst), |
| (ins GPR:$a, GPR:$b), |
| "umaal", " $ldst, $hdst, $a, $b", []>, |
| Requires<[IsARM, HasV6]>; |
| |
| // Most significant word multiply |
| def SMMUL : AMul2I <0b0111010, (outs GPR:$dst), (ins GPR:$a, GPR:$b), |
| "smmul", " $dst, $a, $b", |
| [(set GPR:$dst, (mulhs GPR:$a, GPR:$b))]>, |
| Requires<[IsARM, HasV6]> { |
| let Inst{7-4} = 0b0001; |
| let Inst{15-12} = 0b1111; |
| } |
| |
| def SMMLA : AMul2I <0b0111010, (outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$c), |
| "smmla", " $dst, $a, $b, $c", |
| [(set GPR:$dst, (add (mulhs GPR:$a, GPR:$b), GPR:$c))]>, |
| Requires<[IsARM, HasV6]> { |
| let Inst{7-4} = 0b0001; |
| } |
| |
| |
| def SMMLS : AMul2I <0b0111010, (outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$c), |
| "smmls", " $dst, $a, $b, $c", |
| [(set GPR:$dst, (sub GPR:$c, (mulhs GPR:$a, GPR:$b)))]>, |
| Requires<[IsARM, HasV6]> { |
| let Inst{7-4} = 0b1101; |
| } |
| |
| multiclass AI_smul<string opc, PatFrag opnode> { |
| def BB : AMulxyI<0b0001011, (outs GPR:$dst), (ins GPR:$a, GPR:$b), |
| !strconcat(opc, "bb"), " $dst, $a, $b", |
| [(set GPR:$dst, (opnode (sext_inreg GPR:$a, i16), |
| (sext_inreg GPR:$b, i16)))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 0; |
| let Inst{6} = 0; |
| } |
| |
| def BT : AMulxyI<0b0001011, (outs GPR:$dst), (ins GPR:$a, GPR:$b), |
| !strconcat(opc, "bt"), " $dst, $a, $b", |
| [(set GPR:$dst, (opnode (sext_inreg GPR:$a, i16), |
| (sra GPR:$b, 16)))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 0; |
| let Inst{6} = 1; |
| } |
| |
| def TB : AMulxyI<0b0001011, (outs GPR:$dst), (ins GPR:$a, GPR:$b), |
| !strconcat(opc, "tb"), " $dst, $a, $b", |
| [(set GPR:$dst, (opnode (sra GPR:$a, 16), |
| (sext_inreg GPR:$b, i16)))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 1; |
| let Inst{6} = 0; |
| } |
| |
| def TT : AMulxyI<0b0001011, (outs GPR:$dst), (ins GPR:$a, GPR:$b), |
| !strconcat(opc, "tt"), " $dst, $a, $b", |
| [(set GPR:$dst, (opnode (sra GPR:$a, 16), |
| (sra GPR:$b, 16)))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 1; |
| let Inst{6} = 1; |
| } |
| |
| def WB : AMulxyI<0b0001001, (outs GPR:$dst), (ins GPR:$a, GPR:$b), |
| !strconcat(opc, "wb"), " $dst, $a, $b", |
| [(set GPR:$dst, (sra (opnode GPR:$a, |
| (sext_inreg GPR:$b, i16)), 16))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 1; |
| let Inst{6} = 0; |
| } |
| |
| def WT : AMulxyI<0b0001001, (outs GPR:$dst), (ins GPR:$a, GPR:$b), |
| !strconcat(opc, "wt"), " $dst, $a, $b", |
| [(set GPR:$dst, (sra (opnode GPR:$a, |
| (sra GPR:$b, 16)), 16))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 1; |
| let Inst{6} = 1; |
| } |
| } |
| |
| |
| multiclass AI_smla<string opc, PatFrag opnode> { |
| def BB : AMulxyI<0b0001000, (outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), |
| !strconcat(opc, "bb"), " $dst, $a, $b, $acc", |
| [(set GPR:$dst, (add GPR:$acc, |
| (opnode (sext_inreg GPR:$a, i16), |
| (sext_inreg GPR:$b, i16))))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 0; |
| let Inst{6} = 0; |
| } |
| |
| def BT : AMulxyI<0b0001000, (outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), |
| !strconcat(opc, "bt"), " $dst, $a, $b, $acc", |
| [(set GPR:$dst, (add GPR:$acc, (opnode (sext_inreg GPR:$a, i16), |
| (sra GPR:$b, 16))))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 0; |
| let Inst{6} = 1; |
| } |
| |
| def TB : AMulxyI<0b0001000, (outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), |
| !strconcat(opc, "tb"), " $dst, $a, $b, $acc", |
| [(set GPR:$dst, (add GPR:$acc, (opnode (sra GPR:$a, 16), |
| (sext_inreg GPR:$b, i16))))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 1; |
| let Inst{6} = 0; |
| } |
| |
| def TT : AMulxyI<0b0001000, (outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), |
| !strconcat(opc, "tt"), " $dst, $a, $b, $acc", |
| [(set GPR:$dst, (add GPR:$acc, (opnode (sra GPR:$a, 16), |
| (sra GPR:$b, 16))))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 1; |
| let Inst{6} = 1; |
| } |
| |
| def WB : AMulxyI<0b0001001, (outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), |
| !strconcat(opc, "wb"), " $dst, $a, $b, $acc", |
| [(set GPR:$dst, (add GPR:$acc, (sra (opnode GPR:$a, |
| (sext_inreg GPR:$b, i16)), 16)))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 0; |
| let Inst{6} = 0; |
| } |
| |
| def WT : AMulxyI<0b0001001, (outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), |
| !strconcat(opc, "wt"), " $dst, $a, $b, $acc", |
| [(set GPR:$dst, (add GPR:$acc, (sra (opnode GPR:$a, |
| (sra GPR:$b, 16)), 16)))]>, |
| Requires<[IsARM, HasV5TE]> { |
| let Inst{5} = 0; |
| let Inst{6} = 1; |
| } |
| } |
| |
| defm SMUL : AI_smul<"smul", BinOpFrag<(mul node:$LHS, node:$RHS)>>; |
| defm SMLA : AI_smla<"smla", BinOpFrag<(mul node:$LHS, node:$RHS)>>; |
| |
| // TODO: Halfword multiple accumulate long: SMLAL<x><y> |
| // TODO: Dual halfword multiple: SMUAD, SMUSD, SMLAD, SMLSD, SMLALD, SMLSLD |
| |
| //===----------------------------------------------------------------------===// |
| // Misc. Arithmetic Instructions. |
| // |
| |
| def CLZ : AMiscA1I<0b000010110, (outs GPR:$dst), (ins GPR:$src), |
| "clz", " $dst, $src", |
| [(set GPR:$dst, (ctlz GPR:$src))]>, Requires<[IsARM, HasV5T]> { |
| let Inst{7-4} = 0b0001; |
| let Inst{11-8} = 0b1111; |
| let Inst{19-16} = 0b1111; |
| } |
| |
| def REV : AMiscA1I<0b01101011, (outs GPR:$dst), (ins GPR:$src), |
| "rev", " $dst, $src", |
| [(set GPR:$dst, (bswap GPR:$src))]>, Requires<[IsARM, HasV6]> { |
| let Inst{7-4} = 0b0011; |
| let Inst{11-8} = 0b1111; |
| let Inst{19-16} = 0b1111; |
| } |
| |
| def REV16 : AMiscA1I<0b01101011, (outs GPR:$dst), (ins GPR:$src), |
| "rev16", " $dst, $src", |
| [(set GPR:$dst, |
| (or (and (srl GPR:$src, 8), 0xFF), |
| (or (and (shl GPR:$src, 8), 0xFF00), |
| (or (and (srl GPR:$src, 8), 0xFF0000), |
| (and (shl GPR:$src, 8), 0xFF000000)))))]>, |
| Requires<[IsARM, HasV6]> { |
| let Inst{7-4} = 0b1011; |
| let Inst{11-8} = 0b1111; |
| let Inst{19-16} = 0b1111; |
| } |
| |
| def REVSH : AMiscA1I<0b01101111, (outs GPR:$dst), (ins GPR:$src), |
| "revsh", " $dst, $src", |
| [(set GPR:$dst, |
| (sext_inreg |
| (or (srl (and GPR:$src, 0xFF00), 8), |
| (shl GPR:$src, 8)), i16))]>, |
| Requires<[IsARM, HasV6]> { |
| let Inst{7-4} = 0b1011; |
| let Inst{11-8} = 0b1111; |
| let Inst{19-16} = 0b1111; |
| } |
| |
| def PKHBT : AMiscA1I<0b01101000, (outs GPR:$dst), |
| (ins GPR:$src1, GPR:$src2, i32imm:$shamt), |
| "pkhbt", " $dst, $src1, $src2, LSL $shamt", |
| [(set GPR:$dst, (or (and GPR:$src1, 0xFFFF), |
| (and (shl GPR:$src2, (i32 imm:$shamt)), |
| 0xFFFF0000)))]>, |
| Requires<[IsARM, HasV6]> { |
| let Inst{6-4} = 0b001; |
| } |
| |
| // Alternate cases for PKHBT where identities eliminate some nodes. |
| def : ARMV6Pat<(or (and GPR:$src1, 0xFFFF), (and GPR:$src2, 0xFFFF0000)), |
| (PKHBT GPR:$src1, GPR:$src2, 0)>; |
| def : ARMV6Pat<(or (and GPR:$src1, 0xFFFF), (shl GPR:$src2, imm16_31:$shamt)), |
| (PKHBT GPR:$src1, GPR:$src2, imm16_31:$shamt)>; |
| |
| |
| def PKHTB : AMiscA1I<0b01101000, (outs GPR:$dst), |
| (ins GPR:$src1, GPR:$src2, i32imm:$shamt), |
| "pkhtb", " $dst, $src1, $src2, ASR $shamt", |
| [(set GPR:$dst, (or (and GPR:$src1, 0xFFFF0000), |
| (and (sra GPR:$src2, imm16_31:$shamt), |
| 0xFFFF)))]>, Requires<[IsARM, HasV6]> { |
| let Inst{6-4} = 0b101; |
| } |
| |
| // Alternate cases for PKHTB where identities eliminate some nodes. Note that |
| // a shift amount of 0 is *not legal* here, it is PKHBT instead. |
| def : ARMV6Pat<(or (and GPR:$src1, 0xFFFF0000), (srl GPR:$src2, 16)), |
| (PKHTB GPR:$src1, GPR:$src2, 16)>; |
| def : ARMV6Pat<(or (and GPR:$src1, 0xFFFF0000), |
| (and (srl GPR:$src2, imm1_15:$shamt), 0xFFFF)), |
| (PKHTB GPR:$src1, GPR:$src2, imm1_15:$shamt)>; |
| |
| //===----------------------------------------------------------------------===// |
| // Comparison Instructions... |
| // |
| |
| defm CMP : AI1_cmp_irs<0b1010, "cmp", |
| BinOpFrag<(ARMcmp node:$LHS, node:$RHS)>>; |
| defm CMN : AI1_cmp_irs<0b1011, "cmn", |
| BinOpFrag<(ARMcmp node:$LHS,(ineg node:$RHS))>>; |
| |
| // Note that TST/TEQ don't set all the same flags that CMP does! |
| defm TST : AI1_cmp_irs<0b1000, "tst", |
| BinOpFrag<(ARMcmpNZ (and node:$LHS, node:$RHS), 0)>>; |
| defm TEQ : AI1_cmp_irs<0b1001, "teq", |
| BinOpFrag<(ARMcmpNZ (xor node:$LHS, node:$RHS), 0)>>; |
| |
| defm CMPnz : AI1_cmp_irs<0b1010, "cmp", |
| BinOpFrag<(ARMcmpNZ node:$LHS, node:$RHS)>>; |
| defm CMNnz : AI1_cmp_irs<0b1011, "cmn", |
| BinOpFrag<(ARMcmpNZ node:$LHS,(ineg node:$RHS))>>; |
| |
| def : ARMPat<(ARMcmp GPR:$src, so_imm_neg:$imm), |
| (CMNri GPR:$src, so_imm_neg:$imm)>; |
| |
| def : ARMPat<(ARMcmpNZ GPR:$src, so_imm_neg:$imm), |
| (CMNri GPR:$src, so_imm_neg:$imm)>; |
| |
| |
| // Conditional moves |
| // FIXME: should be able to write a pattern for ARMcmov, but can't use |
| // a two-value operand where a dag node expects two operands. :( |
| def MOVCCr : AI1<0b1101, (outs GPR:$dst), (ins GPR:$false, GPR:$true), DPFrm, |
| "mov", " $dst, $true", |
| [/*(set GPR:$dst, (ARMcmov GPR:$false, GPR:$true, imm:$cc, CCR:$ccr))*/]>, |
| RegConstraint<"$false = $dst">, UnaryDP; |
| |
| def MOVCCs : AI1<0b1101, (outs GPR:$dst), |
| (ins GPR:$false, so_reg:$true), DPSoRegFrm, |
| "mov", " $dst, $true", |
| [/*(set GPR:$dst, (ARMcmov GPR:$false, so_reg:$true, imm:$cc, CCR:$ccr))*/]>, |
| RegConstraint<"$false = $dst">, UnaryDP; |
| |
| def MOVCCi : AI1<0b1101, (outs GPR:$dst), |
| (ins GPR:$false, so_imm:$true), DPFrm, |
| "mov", " $dst, $true", |
| [/*(set GPR:$dst, (ARMcmov GPR:$false, so_imm:$true, imm:$cc, CCR:$ccr))*/]>, |
| RegConstraint<"$false = $dst">, UnaryDP; |
| |
| |
| // LEApcrel - Load a pc-relative address into a register without offending the |
| // assembler. |
| def LEApcrel : AXI1<0x0, (outs GPR:$dst), (ins i32imm:$label, pred:$p), Pseudo, |
| !strconcat(!strconcat(".set PCRELV${:uid}, ($label-(", |
| "${:private}PCRELL${:uid}+8))\n"), |
| !strconcat("${:private}PCRELL${:uid}:\n\t", |
| "add$p $dst, pc, #PCRELV${:uid}")), |
| []>; |
| |
| def LEApcrelJT : AXI1<0x0, (outs GPR:$dst), (ins i32imm:$label, i32imm:$id, pred:$p), |
| Pseudo, |
| !strconcat(!strconcat(".set PCRELV${:uid}, (${label}_${id:no_hash}-(", |
| "${:private}PCRELL${:uid}+8))\n"), |
| !strconcat("${:private}PCRELL${:uid}:\n\t", |
| "add$p $dst, pc, #PCRELV${:uid}")), |
| []>; |
| |
| //===----------------------------------------------------------------------===// |
| // TLS Instructions |
| // |
| |
| // __aeabi_read_tp preserves the registers r1-r3. |
| let isCall = 1, |
| Defs = [R0, R12, LR, CPSR] in { |
| def TPsoft : ABXI<0b1011, (outs), (ins), |
| "bl __aeabi_read_tp", |
| [(set R0, ARMthread_pointer)]>; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Non-Instruction Patterns |
| // |
| |
| // ConstantPool, GlobalAddress, and JumpTable |
| def : ARMPat<(ARMWrapper tglobaladdr :$dst), (LEApcrel tglobaladdr :$dst)>; |
| def : ARMPat<(ARMWrapper tconstpool :$dst), (LEApcrel tconstpool :$dst)>; |
| def : ARMPat<(ARMWrapperJT tjumptable:$dst, imm:$id), |
| (LEApcrelJT tjumptable:$dst, imm:$id)>; |
| |
| // Large immediate handling. |
| |
| // Two piece so_imms. |
| let isReMaterializable = 1 in |
| def MOVi2pieces : AI1x2<(outs GPR:$dst), (ins so_imm2part:$src), Pseudo, |
| "mov", " $dst, $src", |
| [(set GPR:$dst, so_imm2part:$src)]>; |
| |
| def : ARMPat<(or GPR:$LHS, so_imm2part:$RHS), |
| (ORRri (ORRri GPR:$LHS, (so_imm2part_1 imm:$RHS)), |
| (so_imm2part_2 imm:$RHS))>; |
| def : ARMPat<(xor GPR:$LHS, so_imm2part:$RHS), |
| (EORri (EORri GPR:$LHS, (so_imm2part_1 imm:$RHS)), |
| (so_imm2part_2 imm:$RHS))>; |
| |
| // TODO: add,sub,and, 3-instr forms? |
| |
| |
| // Direct calls |
| def : ARMPat<(ARMcall texternalsym:$func), (BL texternalsym:$func)>; |
| |
| // zextload i1 -> zextload i8 |
| def : ARMPat<(zextloadi1 addrmode2:$addr), (LDRB addrmode2:$addr)>; |
| |
| // extload -> zextload |
| def : ARMPat<(extloadi1 addrmode2:$addr), (LDRB addrmode2:$addr)>; |
| def : ARMPat<(extloadi8 addrmode2:$addr), (LDRB addrmode2:$addr)>; |
| def : ARMPat<(extloadi16 addrmode3:$addr), (LDRH addrmode3:$addr)>; |
| |
| def : ARMPat<(extloadi8 addrmodepc:$addr), (PICLDRB addrmodepc:$addr)>; |
| def : ARMPat<(extloadi16 addrmodepc:$addr), (PICLDRH addrmodepc:$addr)>; |
| |
| // smul* and smla* |
| def : ARMV5TEPat<(mul (sra (shl GPR:$a, 16), 16), (sra (shl GPR:$b, 16), 16)), |
| (SMULBB GPR:$a, GPR:$b)>; |
| def : ARMV5TEPat<(mul sext_16_node:$a, sext_16_node:$b), |
| (SMULBB GPR:$a, GPR:$b)>; |
| def : ARMV5TEPat<(mul (sra (shl GPR:$a, 16), 16), (sra GPR:$b, 16)), |
| (SMULBT GPR:$a, GPR:$b)>; |
| def : ARMV5TEPat<(mul sext_16_node:$a, (sra GPR:$b, 16)), |
| (SMULBT GPR:$a, GPR:$b)>; |
| def : ARMV5TEPat<(mul (sra GPR:$a, 16), (sra (shl GPR:$b, 16), 16)), |
| (SMULTB GPR:$a, GPR:$b)>; |
| def : ARMV5TEPat<(mul (sra GPR:$a, 16), sext_16_node:$b), |
| (SMULTB GPR:$a, GPR:$b)>; |
| def : ARMV5TEPat<(sra (mul GPR:$a, (sra (shl GPR:$b, 16), 16)), 16), |
| (SMULWB GPR:$a, GPR:$b)>; |
| def : ARMV5TEPat<(sra (mul GPR:$a, sext_16_node:$b), 16), |
| (SMULWB GPR:$a, GPR:$b)>; |
| |
| def : ARMV5TEPat<(add GPR:$acc, |
| (mul (sra (shl GPR:$a, 16), 16), |
| (sra (shl GPR:$b, 16), 16))), |
| (SMLABB GPR:$a, GPR:$b, GPR:$acc)>; |
| def : ARMV5TEPat<(add GPR:$acc, |
| (mul sext_16_node:$a, sext_16_node:$b)), |
| (SMLABB GPR:$a, GPR:$b, GPR:$acc)>; |
| def : ARMV5TEPat<(add GPR:$acc, |
| (mul (sra (shl GPR:$a, 16), 16), (sra GPR:$b, 16))), |
| (SMLABT GPR:$a, GPR:$b, GPR:$acc)>; |
| def : ARMV5TEPat<(add GPR:$acc, |
| (mul sext_16_node:$a, (sra GPR:$b, 16))), |
| (SMLABT GPR:$a, GPR:$b, GPR:$acc)>; |
| def : ARMV5TEPat<(add GPR:$acc, |
| (mul (sra GPR:$a, 16), (sra (shl GPR:$b, 16), 16))), |
| (SMLATB GPR:$a, GPR:$b, GPR:$acc)>; |
| def : ARMV5TEPat<(add GPR:$acc, |
| (mul (sra GPR:$a, 16), sext_16_node:$b)), |
| (SMLATB GPR:$a, GPR:$b, GPR:$acc)>; |
| def : ARMV5TEPat<(add GPR:$acc, |
| (sra (mul GPR:$a, (sra (shl GPR:$b, 16), 16)), 16)), |
| (SMLAWB GPR:$a, GPR:$b, GPR:$acc)>; |
| def : ARMV5TEPat<(add GPR:$acc, |
| (sra (mul GPR:$a, sext_16_node:$b), 16)), |
| (SMLAWB GPR:$a, GPR:$b, GPR:$acc)>; |
| |
| //===----------------------------------------------------------------------===// |
| // Thumb Support |
| // |
| |
| include "ARMInstrThumb.td" |
| |
| //===----------------------------------------------------------------------===// |
| // Floating Point Support |
| // |
| |
| include "ARMInstrVFP.td" |