| /* Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _PLATFORM_MSMTITANIUM_IOMAP_H_ |
| #define _PLATFORM_MSMTITANIUM_IOMAP_H_ |
| |
| #define MSM_IOMAP_BASE 0x00000000 |
| #define MSM_IOMAP_END 0x08000000 |
| |
| #define SDRAM_START_ADDR 0x80000000 |
| |
| #define MSM_SHARED_BASE 0x86300000 |
| #define MSM_SHARED_IMEM_BASE 0x08600000 |
| |
| #define BS_INFO_OFFSET (0x6B0) |
| #define BS_INFO_ADDR (MSM_SHARED_IMEM_BASE + BS_INFO_OFFSET) |
| |
| #define RESTART_REASON_ADDR (MSM_SHARED_IMEM_BASE + 0x65C) |
| |
| #define APPS_SS_BASE 0x0B000000 |
| #define APPS_SS_END 0x0B200000 |
| |
| #define MSM_GIC_DIST_BASE APPS_SS_BASE |
| #define MSM_GIC_CPU_BASE (APPS_SS_BASE + 0x2000) |
| #define APPS_APCS_QTMR_AC_BASE (APPS_SS_BASE + 0x00020000) |
| #define APPS_APCS_F0_QTMR_V1_BASE (APPS_SS_BASE + 0x00021000) |
| #define QTMR_BASE APPS_APCS_F0_QTMR_V1_BASE |
| #define APCS_ALIAS0_IPC_INTERRUPT (APPS_SS_BASE + 0x00111008) |
| |
| #define PERIPH_SS_BASE 0x07800000 |
| |
| #define MSM_SDC1_BASE (PERIPH_SS_BASE + 0x00024000) |
| #define MSM_SDC2_BASE (PERIPH_SS_BASE + 0x00064000) |
| |
| #define BLSP1_UART0_BASE (PERIPH_SS_BASE + 0x000AF000) |
| #define BLSP1_UART1_BASE (PERIPH_SS_BASE + 0x000B0000) |
| #define MSM_USB_BASE (PERIPH_SS_BASE + 0x000DB000) |
| |
| #define CLK_CTL_BASE 0x1800000 |
| |
| #define SPMI_BASE 0x02000000 |
| #define SPMI_GENI_BASE (SPMI_BASE + 0xA000) |
| #define SPMI_PIC_BASE (SPMI_BASE + 0x01800000) |
| #define PMIC_ARB_CORE 0x200F000 |
| |
| #define TLMM_BASE_ADDR 0x1000000 |
| #define GPIO_CONFIG_ADDR(x) (TLMM_BASE_ADDR + (x)*0x1000) |
| #define GPIO_IN_OUT_ADDR(x) (TLMM_BASE_ADDR + 0x00000004 + (x)*0x1000) |
| |
| #define MPM2_MPM_CTRL_BASE 0x004A0000 |
| #define MPM2_MPM_PS_HOLD 0x004AB000 |
| #define MPM2_MPM_SLEEP_TIMETICK_COUNT_VAL 0x004A3000 |
| |
| /* CRYPTO ENGINE */ |
| #define MSM_CE1_BASE 0x073A000 |
| #define MSM_CE1_BAM_BASE 0x0704000 |
| #define GCC_CRYPTO_BCR (CLK_CTL_BASE + 0x16000) |
| #define GCC_CRYPTO_CMD_RCGR (CLK_CTL_BASE + 0x16004) |
| #define GCC_CRYPTO_CFG_RCGR (CLK_CTL_BASE + 0x16008) |
| #define GCC_CRYPTO_CBCR (CLK_CTL_BASE + 0x1601C) |
| #define GCC_CRYPTO_AXI_CBCR (CLK_CTL_BASE + 0x16020) |
| #define GCC_CRYPTO_AHB_CBCR (CLK_CTL_BASE + 0x16024) |
| |
| |
| /* GPLL */ |
| #define GPLL0_STATUS (CLK_CTL_BASE + 0x2101C) |
| #define APCS_GPLL_ENA_VOTE (CLK_CTL_BASE + 0x45000) |
| #define APCS_CLOCK_BRANCH_ENA_VOTE (CLK_CTL_BASE + 0x45004) |
| #define GPLL4_MODE (CLK_CTL_BASE + 0x24000) |
| #define GPLL4_STATUS (CLK_CTL_BASE + 0x24024) |
| #define GPLL6_STATUS (CLK_CTL_BASE + 0x3701C) |
| |
| /* SDCC */ |
| #define SDC1_HDRV_PULL_CTL (TLMM_BASE_ADDR + 0x10A000) |
| #define SDCC1_BCR (CLK_CTL_BASE + 0x42000) /* block reset*/ |
| #define SDCC1_APPS_CBCR (CLK_CTL_BASE + 0x42018) /* branch ontrol */ |
| #define SDCC1_AHB_CBCR (CLK_CTL_BASE + 0x4201C) |
| #define SDCC1_CMD_RCGR (CLK_CTL_BASE + 0x42004) /* cmd */ |
| #define SDCC1_CFG_RCGR (CLK_CTL_BASE + 0x42008) /* cfg */ |
| #define SDCC1_M (CLK_CTL_BASE + 0x4200C) /* m */ |
| #define SDCC1_N (CLK_CTL_BASE + 0x42010) /* n */ |
| #define SDCC1_D (CLK_CTL_BASE + 0x42014) /* d */ |
| |
| /* SDHCI */ |
| #define MSM_SDC1_SDHCI_BASE (PERIPH_SS_BASE + 0x00024900) |
| #define MSM_SDC2_SDHCI_BASE (PERIPH_SS_BASE + 0x00064900) |
| |
| #define SDCC_MCI_HC_MODE (0x00000078) |
| #define SDCC_HC_PWRCTL_STATUS_REG (0x000000DC) |
| #define SDCC_HC_PWRCTL_MASK_REG (0x000000E0) |
| #define SDCC_HC_PWRCTL_CLEAR_REG (0x000000E4) |
| #define SDCC_HC_PWRCTL_CTL_REG (0x000000E8) |
| |
| #define SDCC2_BCR (CLK_CTL_BASE + 0x43000) /* block reset */ |
| #define SDCC2_APPS_CBCR (CLK_CTL_BASE + 0x43018) /* branch control */ |
| #define SDCC2_AHB_CBCR (CLK_CTL_BASE + 0x4301C) |
| #define SDCC2_CMD_RCGR (CLK_CTL_BASE + 0x43004) /* cmd */ |
| #define SDCC2_CFG_RCGR (CLK_CTL_BASE + 0x43008) /* cfg */ |
| #define SDCC2_M (CLK_CTL_BASE + 0x4300C) /* m */ |
| #define SDCC2_N (CLK_CTL_BASE + 0x43010) /* n */ |
| #define SDCC2_D (CLK_CTL_BASE + 0x43014) /* d */ |
| |
| /* UART */ |
| #define BLSP1_AHB_CBCR (CLK_CTL_BASE + 0x1008) |
| #define BLSP1_UART2_APPS_CBCR (CLK_CTL_BASE + 0x302C) |
| #define BLSP1_UART2_APPS_CMD_RCGR (CLK_CTL_BASE + 0x3034) |
| #define BLSP1_UART2_APPS_CFG_RCGR (CLK_CTL_BASE + 0x3038) |
| #define BLSP1_UART2_APPS_M (CLK_CTL_BASE + 0x303C) |
| #define BLSP1_UART2_APPS_N (CLK_CTL_BASE + 0x3040) |
| #define BLSP1_UART2_APPS_D (CLK_CTL_BASE + 0x3044) |
| |
| /* USB */ |
| #define USB_HS_BCR (CLK_CTL_BASE + 0x41000) |
| #define USB_HS_SYSTEM_CBCR (CLK_CTL_BASE + 0x41004) |
| #define USB_HS_AHB_CBCR (CLK_CTL_BASE + 0x41008) |
| #define USB_HS_SYSTEM_CMD_RCGR (CLK_CTL_BASE + 0x41010) |
| #define USB_HS_SYSTEM_CFG_RCGR (CLK_CTL_BASE + 0x41014) |
| #define MSM_USB30_QSCRATCH_BASE 0x070F8800 |
| #define MSM_USB30_BASE 0x7000000 |
| #define USB2_PHY_SEL 0x01937000 |
| |
| #define TCSR_TZ_WONCE 0x193D000 |
| #define TCSR_BOOT_MISC_DETECT 0x193D100 |
| |
| #define DDR_START 0x80000000 |
| #define ABOOT_FORCE_KERNEL_ADDR DDR_START + 0x8000 |
| #define ABOOT_FORCE_KERNEL64_ADDR DDR_START + 0x80000 |
| #define ABOOT_FORCE_RAMDISK_ADDR DDR_START + 0x2000000 |
| #define ABOOT_FORCE_TAGS_ADDR DDR_START + 0x1E00000 |
| #endif |