Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / lk / refs/heads/rel/p/fp2/20.12.0-beta / . / platform / msm_shared / mmc_sdhci.c
blob: 0d0b361b45aa9f5440180aebf1b56d50abfe201b [file] [log] [blame]
/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <string.h>
#include <stdlib.h>
#include <debug.h>
#include <reg.h>
#include <mmc_sdhci.h>
#include <sdhci.h>
#include <sdhci_msm.h>
#include <partition_parser.h>
#include <platform/iomap.h>
#include <platform/timer.h>
extern void clock_init_mmc(uint32_t);
extern void clock_config_mmc(uint32_t, uint32_t);
/* data access time unit in ns */
static const uint32_t taac_unit[] =
{
1, 10, 100, 1000, 10000, 100000, 1000000, 10000000
};
/* data access time value x 10 */
static const uint32_t taac_value[] =
{
0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80
};
/* data transfer rate in kbit/s */
static const uint32_t xfer_rate_unit[] =
{
100, 1000, 10000, 100000, 0, 0, 0, 0
};
/* data transfer rate value x 10*/
static const uint32_t xfer_rate_value[] =
{
0, 10, 12, 13, 15, 20, 26, 30, 35, 40, 45, 52, 55, 60, 70, 80
};
/*
* Function: mmc decode and save csd
* Arg : Card structure & raw csd
* Return : 0 on Success, 1 on Failure
* Flow : Decodes CSD response received from the card.
* Note that we have defined only few of the CSD elements
* in csd structure. We'll only decode those values.
*/
static uint32_t mmc_decode_and_save_csd(struct mmc_card *card)
{
uint32_t mmc_sizeof = 0;
uint32_t mmc_unit = 0;
uint32_t mmc_value = 0;
uint32_t mmc_temp = 0;
uint32_t *raw_csd = card->raw_csd;
struct mmc_csd mmc_csd;
mmc_sizeof = sizeof(uint32_t) * 8;
mmc_csd.cmmc_structure = UNPACK_BITS(raw_csd, 126, 2, mmc_sizeof);
if (MMC_CARD_SD(card)) {
/* Parse CSD according to SD card spec. */
/* CSD register is little bit differnet for CSD version 2.0 High
* Capacity and CSD version 1.0/2.0 Standard memory cards.
* In Version 2.0 some of the fields have fixed values and it's
* not necessary for host to refer these fields in CSD sent by
* card
*/
if (mmc_csd.cmmc_structure == 1) {
/* CSD Version 2.0 */
mmc_csd.card_cmd_class = UNPACK_BITS(raw_csd, 84, 12, mmc_sizeof);
/* Fixed value is 9 = 2^9 = 512 */
mmc_csd.write_blk_len = 512;
/* Fixed value is 9 = 512 */
mmc_csd.read_blk_len = 512;
/* Fixed value: 010b */
mmc_csd.r2w_factor = 0x2;
/* Not there in version 2.0 */
mmc_csd.c_size_mult = 0;
mmc_csd.c_size = UNPACK_BITS(raw_csd, 48, 22, mmc_sizeof);
mmc_csd.nsac_clk_cycle = UNPACK_BITS(raw_csd, 104, 8, mmc_sizeof)
* 100;
mmc_unit = UNPACK_BITS(raw_csd, 112, 3, mmc_sizeof);
mmc_value = UNPACK_BITS(raw_csd, 115, 4, mmc_sizeof);
mmc_csd.taac_ns = (taac_value[mmc_value] * taac_unit[mmc_unit])
/ 10;
mmc_csd.erase_blk_len = 1;
mmc_csd.read_blk_misalign = 0;
mmc_csd.write_blk_misalign = 0;
mmc_csd.read_blk_partial = 0;
mmc_csd.write_blk_partial = 0;
mmc_unit = UNPACK_BITS(raw_csd, 96, 3, mmc_sizeof);
mmc_value = UNPACK_BITS(raw_csd, 99, 4, mmc_sizeof);
mmc_csd.tran_speed = (xfer_rate_value[mmc_value] *
xfer_rate_unit[mmc_unit]) / 10;
mmc_csd.wp_grp_size = 0x0;
mmc_csd.wp_grp_enable = 0x0;
mmc_csd.perm_wp = UNPACK_BITS(raw_csd, 13, 1, mmc_sizeof);
mmc_csd.temp_wp = UNPACK_BITS(raw_csd, 12, 1, mmc_sizeof);
/* Calculate the card capcity */
card->capacity = (unsigned long long) (1 + mmc_csd.c_size) * 512 * 1024;
} else {
/* CSD Version 1.0 */
mmc_csd.card_cmd_class = UNPACK_BITS(raw_csd, 84, 12, mmc_sizeof);
mmc_temp = UNPACK_BITS(raw_csd, 22, 4, mmc_sizeof);
mmc_csd.write_blk_len = (mmc_temp > 8 && mmc_temp < 12) ?
(1 << mmc_temp) : 512;
mmc_temp = UNPACK_BITS(raw_csd, 80, 4, mmc_sizeof);
mmc_csd.read_blk_len = (mmc_temp > 8 && mmc_temp < 12) ?
(1 << mmc_temp) : 512;
mmc_unit = UNPACK_BITS(raw_csd, 112, 3, mmc_sizeof);
mmc_value = UNPACK_BITS(raw_csd, 115, 4, mmc_sizeof);
mmc_csd.taac_ns = (taac_value[mmc_value] * taac_unit[mmc_unit])
/ 10;
mmc_unit = UNPACK_BITS(raw_csd, 96, 3, mmc_sizeof);
mmc_value = UNPACK_BITS(raw_csd, 99, 4, mmc_sizeof);
mmc_csd.tran_speed = (xfer_rate_value[mmc_value] *
xfer_rate_unit[mmc_unit]) / 10;
mmc_csd.nsac_clk_cycle = UNPACK_BITS(raw_csd, 104, 8, mmc_sizeof)
* 100;
mmc_csd.r2w_factor = UNPACK_BITS(raw_csd, 26, 3, mmc_sizeof);
mmc_csd.sector_size = UNPACK_BITS(raw_csd, 39, 7, mmc_sizeof) + 1;
mmc_csd.erase_blk_len = UNPACK_BITS(raw_csd, 46, 1, mmc_sizeof);
mmc_csd.read_blk_misalign = UNPACK_BITS(raw_csd, 77, 1, mmc_sizeof);
mmc_csd.write_blk_misalign = UNPACK_BITS(raw_csd, 78, 1, mmc_sizeof);
mmc_csd.read_blk_partial = UNPACK_BITS(raw_csd, 79, 1, mmc_sizeof);
mmc_csd.write_blk_partial = UNPACK_BITS(raw_csd, 21, 1, mmc_sizeof);
mmc_csd.c_size_mult = UNPACK_BITS(raw_csd, 47, 3, mmc_sizeof);
mmc_csd.c_size = UNPACK_BITS(raw_csd, 62, 12, mmc_sizeof);
mmc_csd.wp_grp_size = UNPACK_BITS(raw_csd, 32, 7, mmc_sizeof);
mmc_csd.wp_grp_enable = UNPACK_BITS(raw_csd, 31, 1, mmc_sizeof);
mmc_csd.perm_wp = UNPACK_BITS(raw_csd, 13, 1, mmc_sizeof);
mmc_csd.temp_wp = UNPACK_BITS(raw_csd, 12, 1, mmc_sizeof);
/* Calculate the card capacity */
mmc_temp = (1 << (mmc_csd.c_size_mult + 2)) * (mmc_csd.c_size + 1);
card->capacity = (unsigned long long)mmc_temp * mmc_csd.read_blk_len;
}
} else {
/* Parse CSD according to MMC card spec. */
mmc_csd.spec_vers = UNPACK_BITS(raw_csd, 122, 4, mmc_sizeof);
mmc_csd.card_cmd_class = UNPACK_BITS(raw_csd, 84, 12, mmc_sizeof);
mmc_csd.write_blk_len = 1 << UNPACK_BITS(raw_csd, 22, 4, mmc_sizeof);
mmc_csd.read_blk_len = 1 << UNPACK_BITS(raw_csd, 80, 4, mmc_sizeof);
mmc_csd.r2w_factor = UNPACK_BITS(raw_csd, 26, 3, mmc_sizeof);
mmc_csd.c_size_mult = UNPACK_BITS(raw_csd, 47, 3, mmc_sizeof);
mmc_csd.c_size = UNPACK_BITS(raw_csd, 62, 12, mmc_sizeof);
mmc_csd.nsac_clk_cycle = UNPACK_BITS(raw_csd, 104, 8, mmc_sizeof) * 100;
mmc_unit = UNPACK_BITS(raw_csd, 112, 3, mmc_sizeof);
mmc_value = UNPACK_BITS(raw_csd, 115, 4, mmc_sizeof);
mmc_csd.taac_ns = (taac_value[mmc_value] * taac_unit[mmc_unit]) / 10;
mmc_csd.read_blk_misalign = UNPACK_BITS(raw_csd, 77, 1, mmc_sizeof);
mmc_csd.write_blk_misalign = UNPACK_BITS(raw_csd, 78, 1, mmc_sizeof);
mmc_csd.read_blk_partial = UNPACK_BITS(raw_csd, 79, 1, mmc_sizeof);
mmc_csd.write_blk_partial = UNPACK_BITS(raw_csd, 21, 1, mmc_sizeof);
/* Ignore -- no use of this value. */
mmc_csd.tran_speed = 0x00;
mmc_csd.erase_grp_size = UNPACK_BITS(raw_csd, 42, 5, mmc_sizeof);
mmc_csd.erase_grp_mult = UNPACK_BITS(raw_csd, 37, 5, mmc_sizeof);
mmc_csd.wp_grp_size = UNPACK_BITS(raw_csd, 32, 5, mmc_sizeof);
mmc_csd.wp_grp_enable = UNPACK_BITS(raw_csd, 31, 1, mmc_sizeof);
mmc_csd.perm_wp = UNPACK_BITS(raw_csd, 13, 1, mmc_sizeof);
mmc_csd.temp_wp = UNPACK_BITS(raw_csd, 12, 1, mmc_sizeof);
/* Calculate the card capcity */
if (mmc_csd.c_size != 0xFFF) {
/* For cards less than or equal to 2GB */
mmc_temp = (1 << (mmc_csd.c_size_mult + 2)) * (mmc_csd.c_size + 1);
card->capacity = (unsigned long long) mmc_temp * mmc_csd.read_blk_len;
} else {
/* For cards greater than 2GB, Ext CSD register's SEC_COUNT
* is used to calculate the size.
*/
uint64_t sec_count;
sec_count = (card->ext_csd[MMC_SEC_COUNT4] << MMC_SEC_COUNT4_SHIFT)
| (card->ext_csd[MMC_SEC_COUNT3] << MMC_SEC_COUNT3_SHIFT)
| (card->ext_csd[MMC_SEC_COUNT2] << MMC_SEC_COUNT2_SHIFT)
| card->ext_csd[MMC_SEC_COUNT1];
card->capacity = sec_count * MMC_BLK_SZ;
}
}
/* save the information in card structure */
memcpy((struct mmc_csd *)&card->csd,(struct mmc_csd *)&mmc_csd,
sizeof(struct mmc_csd));
dprintf(SPEW, "Decoded CSD fields:\n");
dprintf(SPEW, "cmmc_structure: %u\n", mmc_csd.cmmc_structure);
dprintf(SPEW, "card_cmd_class: %x\n", mmc_csd.card_cmd_class);
dprintf(SPEW, "write_blk_len: %u\n", mmc_csd.write_blk_len);
dprintf(SPEW, "read_blk_len: %u\n", mmc_csd.read_blk_len);
dprintf(SPEW, "r2w_factor: %u\n", mmc_csd.r2w_factor);
dprintf(SPEW, "sector_size: %u\n", mmc_csd.sector_size);
dprintf(SPEW, "c_size_mult:%u\n", mmc_csd.c_size_mult);
dprintf(SPEW, "c_size: %u\n", mmc_csd.c_size);
dprintf(SPEW, "nsac_clk_cycle: %u\n", mmc_csd.nsac_clk_cycle);
dprintf(SPEW, "taac_ns: %u\n", mmc_csd.taac_ns);
dprintf(SPEW, "tran_speed: %u kbps\n", mmc_csd.tran_speed);
dprintf(SPEW, "erase_blk_len: %u\n", mmc_csd.erase_blk_len);
dprintf(SPEW, "read_blk_misalign: %u\n", mmc_csd.read_blk_misalign);
dprintf(SPEW, "write_blk_misalign: %u\n", mmc_csd.write_blk_misalign);
dprintf(SPEW, "read_blk_partial: %u\n", mmc_csd.read_blk_partial);
dprintf(SPEW, "write_blk_partial: %u\n", mmc_csd.write_blk_partial);
dprintf(SPEW, "Card Capacity: %llu Bytes\n", card->capacity);
return 0;
}
/*
* Function: mmc decode & save cid
* Arg : card structure & raw cid
* Return : 0 on Success, 1 on Failure
* Flow : Decode CID sent by the card.
*/
static uint32_t mmc_decode_and_save_cid(struct mmc_card *card,
uint32_t *raw_cid)
{
struct mmc_cid mmc_cid;
uint32_t mmc_sizeof = 0;
int i = 0;
if (!raw_cid) {
return 1;
}
mmc_sizeof = sizeof(uint32_t) * 8;
if (MMC_CARD_SD(card)) {
mmc_cid.mid = UNPACK_BITS(raw_cid, 120, 8, mmc_sizeof);
mmc_cid.oid = UNPACK_BITS(raw_cid, 104, 16, mmc_sizeof);
for (i = 0; i < 5; i++) {
mmc_cid.pnm[i] = (uint8_t)UNPACK_BITS(raw_cid,
(104 - 8 * (i + 1)),
8,
mmc_sizeof);
}
mmc_cid.pnm[5] = 0;
mmc_cid.pnm[6] = 0;
mmc_cid.prv = UNPACK_BITS(raw_cid, 56, 8, mmc_sizeof);
mmc_cid.psn = UNPACK_BITS(raw_cid, 24, 32, mmc_sizeof);
mmc_cid.month = UNPACK_BITS(raw_cid, 8, 4, mmc_sizeof);
mmc_cid.year = UNPACK_BITS(raw_cid, 12, 8, mmc_sizeof);
mmc_cid.year += 2000;
} else {
mmc_cid.mid = UNPACK_BITS(raw_cid, 120, 8, mmc_sizeof);
mmc_cid.oid = UNPACK_BITS(raw_cid, 104, 16, mmc_sizeof);
for (i = 0; i < 6; i++) {
mmc_cid.pnm[i] = (uint8_t)UNPACK_BITS(raw_cid, (104 - 8 * (i + 1)),
8, mmc_sizeof);
}
mmc_cid.pnm[6] = 0;
mmc_cid.prv = UNPACK_BITS(raw_cid, 48, 8, mmc_sizeof);
mmc_cid.psn = UNPACK_BITS(raw_cid, 16, 32, mmc_sizeof);
mmc_cid.month = UNPACK_BITS(raw_cid, 8, 4, mmc_sizeof);
mmc_cid.year = UNPACK_BITS(raw_cid, 12, 4, mmc_sizeof);
mmc_cid.year += 1997;
}
/* save it in card database */
memcpy((struct mmc_cid *)&card->cid,
(struct mmc_cid *)&mmc_cid, sizeof(struct mmc_cid));
dprintf(SPEW, "Decoded CID fields:\n");
dprintf(SPEW, "Manufacturer ID: %x\n", mmc_cid.mid);
dprintf(SPEW, "OEM ID: 0x%x\n", mmc_cid.oid);
dprintf(SPEW, "Product Name: %s\n", mmc_cid.pnm);
dprintf(SPEW, "Product revision: %d.%d\n", (mmc_cid.prv >> 4),
(mmc_cid.prv & 0xF));
dprintf(SPEW, "Product serial number: %X\n", mmc_cid.psn);
dprintf(SPEW, "Manufacturing date: %d %d\n", mmc_cid.month, mmc_cid.year);
return 0;
}
/*
* Function: mmc reset cards
* Arg : host structure
* Return : 0 on Success, 1 on Failure
* Flow : Reset all the cards to idle condition (CMD 0)
*/
static uint8_t mmc_reset_card(struct sdhci_host *host)
{
struct mmc_command cmd;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
cmd.cmd_index = CMD0_GO_IDLE_STATE;
cmd.argument = 0;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_NONE;
/* send command */
return sdhci_send_command(host, &cmd);
}
/*
* Function: mmc operations command
* Arg : host & card structure
* Return : 0 on Success, 1 on Failure
* Flow : Send CMD1 to know whether the card supports host VDD profile or not.
*/
static uint32_t mmc_send_op_cond(struct sdhci_host *host, struct mmc_card *card)
{
struct mmc_command cmd;
uint32_t mmc_resp = 0;
uint32_t mmc_ret = 0;
uint32_t mmc_retry = 0;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD1 format:
* [31] Busy bit
* [30:29] Access mode
* [28:24] reserved
* [23:15] 2.7-3.6
* [14:8] 2.0-2.6
* [7] 1.7-1.95
* [6:0] reserved
*/
cmd.cmd_index = CMD1_SEND_OP_COND;
cmd.argument = card->ocr;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R3;
do {
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret)
return mmc_ret;
/* Command returned success, now it's time to examine response */
mmc_resp = cmd.resp[0];
/* Check the response for busy status */
if (!(mmc_resp & MMC_OCR_BUSY)) {
mmc_retry++;
mdelay(1);
continue;
} else
break;
} while (mmc_retry < MMC_MAX_COMMAND_RETRY);
/* If we reached here after max retries, we failed to get OCR */
if (mmc_retry == MMC_MAX_COMMAND_RETRY && !(mmc_resp & MMC_OCR_BUSY)) {
dprintf(CRITICAL, "Card has busy status set. Init did not complete\n");
return 1;
}
/* Response contains card's ocr. Update card's information */
card->ocr = mmc_resp;
if (mmc_resp & MMC_OCR_SEC_MODE)
card->type = MMC_TYPE_MMCHC;
else
card->type = MMC_TYPE_STD_MMC;
return 0;
}
/*
* Function: mmc send cid
* Arg : host & card structure
* Return : 0 on Success, 1 on Failure
* Flow : Request any card to send its uniquie card identification
* (CID) number (CMD2).
*/
static uint32_t mmc_all_send_cid(struct sdhci_host *host, struct mmc_card *card)
{
struct mmc_command cmd;
uint32_t mmc_ret = 0;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD2 Format:
* [31:0] stuff bits
*/
cmd.cmd_index = CMD2_ALL_SEND_CID;
cmd.argument = 0;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R2;
/* send command */
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret) {
return mmc_ret;
}
/* Response contains card's 128 bits CID register */
mmc_ret = mmc_decode_and_save_cid(card, cmd.resp);
if (mmc_ret) {
return mmc_ret;
}
return 0;
}
/*
* Function: mmc send relative address
* Arg : host & card structure
* Return : 0 on Success, 1 on Failure
* Flow : Ask card to send it's relative card address (RCA).
* This RCA number is shorter than CID and is used by
* the host to address the card in future (CMD3)
*/
static uint32_t mmc_send_relative_address(struct sdhci_host *host,
struct mmc_card *card)
{
struct mmc_command cmd;
uint32_t mmc_ret = 0;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD3 Format:
* [31:0] stuff bits
*/
if (MMC_CARD_SD(card)) {
cmd.cmd_index = CMD3_SEND_RELATIVE_ADDR;
cmd.argument = 0;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R6;
/* send command */
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret)
return mmc_ret;
/* For sD, card will send RCA. Store it */
card->rca = (cmd.resp[0] >> 16);
} else {
cmd.cmd_index = CMD3_SEND_RELATIVE_ADDR;
cmd.argument = (MMC_RCA << 16);
card->rca = (cmd.argument >> 16);
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R6;
/* send command */
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret)
return mmc_ret;
}
return 0;
}
/*
* Function: mmc send csd
* Arg : host, card structure & o/p arg to store csd
* Return : 0 on Success, 1 on Failure
* Flow : Requests card to send it's CSD register's contents. (CMD9)
*/
static uint32_t mmc_send_csd(struct sdhci_host *host, struct mmc_card *card)
{
struct mmc_command cmd;
uint32_t mmc_arg = 0;
uint32_t mmc_ret = 0;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD9 Format:
* [31:16] RCA
* [15:0] stuff bits
*/
mmc_arg |= card->rca << 16;
cmd.cmd_index = CMD9_SEND_CSD;
cmd.argument = mmc_arg;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R2;
/* send command */
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret)
return mmc_ret;
/* response contains the card csd */
memcpy(card->raw_csd, cmd.resp, sizeof(cmd.resp));
return 0;
}
/*
* Function: mmc select card
* Arg : host, card structure
* Return : 0 on Success, 1 on Failure
* Flow : Selects a card by sending CMD7 to the card with its RCA.
* If RCA field is set as 0 ( or any other address ),
* the card will be de-selected. (CMD7)
*/
static uint32_t mmc_select_card(struct sdhci_host *host, struct mmc_card *card)
{
struct mmc_command cmd;
uint32_t mmc_arg = 0;
uint32_t mmc_ret = 0;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD7 Format:
* [31:16] RCA
* [15:0] stuff bits
*/
mmc_arg |= card->rca << 16;
cmd.cmd_index = CMD7_SELECT_DESELECT_CARD;
cmd.argument = mmc_arg;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
/* If we are deselecting card, we do not get response */
if (card->rca) {
if (MMC_CARD_SD(card))
cmd.resp_type = SDHCI_CMD_RESP_R1B;
else
cmd.resp_type = SDHCI_CMD_RESP_R1;
} else
cmd.resp_type = SDHCI_CMD_RESP_NONE;
/* send command */
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret)
return mmc_ret;
return 0;
}
/*
* Function: mmc set block len
* Arg : host, card structure & block length
* Return : 0 on Success, 1 on Failure
* Flow : Send command to set block length.
*/
static uint32_t mmc_set_block_len(struct sdhci_host *host,
struct mmc_card *card,
uint32_t block_len)
{
struct mmc_command cmd;
uint32_t mmc_ret = 0;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD16 Format:
* [31:0] block length
*/
cmd.cmd_index = CMD16_SET_BLOCKLEN;
cmd.argument = block_len;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
/* send command */
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret)
return mmc_ret;
/*
* If blocklength is larger than 512 bytes,
* the card sets BLOCK_LEN_ERROR bit.
*/
if (cmd.resp[0] & MMC_R1_BLOCK_LEN_ERR) {
dprintf(CRITICAL, "The block length is not supported by the card\n");
return 1;
}
return 0;
}
/*
* Function: mmc get card status
* Arg : host, card structure & o/p argument card status
* Return : 0 on Success, 1 on Failure
* Flow : Get the current status of the card
*/
static uint32_t mmc_get_card_status(struct sdhci_host *host,
struct mmc_card *card, uint32_t *status)
{
struct mmc_command cmd;
uint32_t mmc_ret = 0;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD13 Format:
* [31:16] RCA
* [15:0] stuff bits
*/
cmd.cmd_index = CMD13_SEND_STATUS;
cmd.argument = card->rca << 16;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
/* send command */
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret)
return mmc_ret;
/* Checking ADDR_OUT_OF_RANGE error in CMD13 response */
if ((cmd.resp[0] >> 31) & 0x01)
return 1;
*status = cmd.resp[0];
return 0;
}
/*
* Function: mmc get ext csd
* Arg : host, card structure & array to hold ext attributes
* Return : 0 on Success, 1 on Failure
* Flow : Send ext csd command & get the card attributes
*/
static uint32_t mmc_get_ext_csd(struct sdhci_host *host, struct mmc_card *card)
{
struct mmc_command cmd;
uint32_t mmc_ret = 0;
card->ext_csd = memalign(CACHE_LINE, ROUNDUP(512, CACHE_LINE));
ASSERT(card->ext_csd);
memset(card->ext_csd, 0, sizeof(card->ext_csd));
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD8 */
cmd.cmd_index = CMD8_SEND_EXT_CSD;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
cmd.data.data_ptr = card->ext_csd;
cmd.data.num_blocks = 1;
cmd.data_present = 0x1;
cmd.trans_mode = SDHCI_MMC_READ;
/* send command */
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret)
return mmc_ret;
return mmc_ret;
}
/*
* Function: mmc switch command
* Arg : Host, card structure, access mode, index & value to be set
* Return : 0 on Success, 1 on Failure
* Flow : Send switch command to the card to set the ext attribute @ index
*/
static uint32_t mmc_switch_cmd(struct sdhci_host *host, struct mmc_card *card,
uint32_t access, uint32_t index, uint32_t value)
{
struct mmc_command cmd;
uint32_t mmc_ret = 0;
uint32_t mmc_status;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD6 Format:
* [31:26] set to 0
* [25:24] access
* [23:16] index
* [15:8] value
* [7:3] set to 0
* [2:0] cmd set
*/
cmd.cmd_index = CMD6_SWITCH_FUNC;
cmd.argument |= (access << 24);
cmd.argument |= (index << 16);
cmd.argument |= (value << 8);
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1B;
mmc_ret = sdhci_send_command(host, &cmd);
if (mmc_ret) {
dprintf(CRITICAL, "CMD6 send failed\n");
return mmc_ret;
}
/* Check if the card completed the switch command processing */
mmc_ret = mmc_get_card_status(host, card, &mmc_status);
if (mmc_ret) {
dprintf(CRITICAL, "Get card status failed\n");
return mmc_ret;
}
if (MMC_CARD_STATUS(mmc_status) != MMC_TRAN_STATE) {
dprintf(CRITICAL, "Switch cmd failed. Card not in tran state\n");
mmc_ret = 1;
}
if (mmc_status & MMC_SWITCH_FUNC_ERR_FLAG) {
dprintf(CRITICAL, "Switch cmd failed. Switch Error.\n");
mmc_ret = 1;
}
return mmc_ret;
}
/*
* Function: mmc set bus width
* Arg : Host, card structure & width
* Return : 0 on Success, 1 on Failure
* Flow : Send switch command to set bus width
*/
static uint32_t mmc_set_bus_width(struct sdhci_host *host,
struct mmc_card *card,
uint32_t width)
{
uint32_t mmc_ret = 0;
mmc_ret = mmc_switch_cmd(host, card, MMC_ACCESS_WRITE,
MMC_EXT_MMC_BUS_WIDTH, width);
if (mmc_ret) {
dprintf(CRITICAL, "Switch cmd failed\n");
return mmc_ret;
}
return 0;
}
/*
* Function: mmc card supports hs400 mode
* Arg : None
* Return : 1 if hs400 mode is supported, 0 otherwise
* Flow : Check the ext csd attributes of the card
*/
static uint8_t mmc_card_supports_hs400_mode(struct mmc_card *card)
{
if (card->ext_csd[MMC_DEVICE_TYPE] & MMC_HS_HS400_MODE)
return 1;
else
return 0;
}
/*
* Function: mmc card supports hs200 mode
* Arg : None
* Return : 1 if HS200 mode is supported, 0 otherwise
* Flow : Check the ext csd attributes of the card
*/
static uint8_t mmc_card_supports_hs200_mode(struct mmc_card *card)
{
if (card->ext_csd[MMC_DEVICE_TYPE] & MMC_HS_HS200_MODE)
return 1;
else
return 0;
}
/*
* Function: mmc card supports ddr mode
* Arg : None
* Return : 1 if DDR mode is supported, 0 otherwise
* Flow : Check the ext csd attributes of the card
*/
static uint8_t mmc_card_supports_ddr_mode(struct mmc_card *card)
{
if (card->ext_csd[MMC_DEVICE_TYPE] & MMC_HS_DDR_MODE)
return 1;
else
return 0;
}
/*
* Function : Enable HS200 mode
* Arg : Host, card structure and bus width
* Return : 0 on Success, 1 on Failure
* Flow :
* - Set the bus width to 4/8 bit SDR as supported by the target & host
* - Set the HS_TIMING on ext_csd 185 for the card
*/
static uint32_t mmc_set_hs200_mode(struct sdhci_host *host,
struct mmc_card *card, uint32_t width)
{
uint32_t mmc_ret = 0;
DBG("\n Enabling HS200 Mode Start\n");
/* Set 4/8 bit SDR bus width */
mmc_ret = mmc_set_bus_width(host, card, width);
if (mmc_ret) {
dprintf(CRITICAL, "Failure to set wide bus for Card(RCA:%x)\n",
card->rca);
return mmc_ret;
}
/* Setting HS200 in HS_TIMING using EXT_CSD (CMD6) */
mmc_ret = mmc_switch_cmd(host, card, MMC_ACCESS_WRITE, MMC_EXT_MMC_HS_TIMING, MMC_HS200_TIMING);
if (mmc_ret) {
dprintf(CRITICAL, "Switch cmd returned failure %d\n", __LINE__);
return mmc_ret;
}
/* Enable SDR104 mode in controller */
sdhci_set_uhs_mode(host, SDHCI_SDR104_MODE);
/* Run the clock @ 400 Mhz */
if (host->caps.hs400_support && mmc_card_supports_hs400_mode(card))
{
/* Save the timing value, before changing the clock */
MMC_SAVE_TIMING(host, MMC_HS400_TIMING);
/*
* Set the MCI_CLK divider before changing the sdcc core
* core clk to ensure card receives no more than 200 MHZ
* clock frequency
*/
sdhci_msm_set_mci_clk(host);
clock_config_mmc(host->msm_host->slot, SDHCI_CLK_400MHZ);
}
else
{
/* Save the timing value, before changing the clock */
MMC_SAVE_TIMING(host, MMC_HS200_TIMING);
}
/* Execute Tuning for hs200 mode */
if ((mmc_ret = sdhci_msm_execute_tuning(host, width)))
dprintf(CRITICAL, "Tuning for hs200 failed\n");
DBG("\n Enabling HS200 Mode Done\n");
return mmc_ret;
}
/*
* Function: mmc set ddr mode
* Arg : Host & card structure
* Return : 0 on Success, 1 on Failure
* Flow : Set bus width for ddr mode & set controller in DDR mode
*/
static uint8_t mmc_set_ddr_mode(struct sdhci_host *host, struct mmc_card *card)
{
uint8_t mmc_ret = 0;
DBG("\n Enabling DDR Mode Start\n");
/* Set width for 8 bit DDR mode by default */
mmc_ret = mmc_set_bus_width(host, card, DATA_DDR_BUS_WIDTH_8BIT);
if (mmc_ret) {
dprintf(CRITICAL, "Failure to set DDR mode for Card(RCA:%x)\n",
card->rca);
return mmc_ret;
}
/* Save the timing value, before changing the clock */
MMC_SAVE_TIMING(host, SDHCI_DDR50_MODE);
/* Set the DDR mode in controller */
sdhci_set_uhs_mode(host, SDHCI_DDR50_MODE);
DBG("\n Enabling DDR Mode Done\n");
return 0;
}
/*
* Function: mmc set high speed interface
* Arg : Host & card structure
* Return : None
* Flow : Sets the sdcc clock & clock divider in the host controller
* Adjust the interface speed to optimal speed
*/
static uint32_t mmc_set_hs_interface(struct sdhci_host *host,
struct mmc_card *card)
{
uint32_t mmc_ret = 0;
/* Setting HS_TIMING in EXT_CSD (CMD6) */
mmc_ret = mmc_switch_cmd(host, card, MMC_ACCESS_WRITE,
MMC_EXT_MMC_HS_TIMING, MMC_HS_TIMING);
if (mmc_ret) {
dprintf(CRITICAL, "Switch cmd returned failure %d\n", __LINE__);
return mmc_ret;
}
/* Save the timing value, before changing the clock */
MMC_SAVE_TIMING(host, SDHCI_SDR25_MODE);
/* Set the SDR25 mode in controller */
sdhci_set_uhs_mode(host, SDHCI_SDR25_MODE);
return 0;
}
/*
* Function : Enable HS400 mode
* Arg : Host, card structure and bus width
* Return : 0 on Success, 1 on Failure
* Flow :
* - Set the bus width to 8 bit DDR
* - Set the HS_TIMING on ext_csd 185 for the card
*/
uint32_t mmc_set_hs400_mode(struct sdhci_host *host,
struct mmc_card *card, uint32_t width)
{
uint32_t mmc_ret = 0;
/*
* Emmc 5.0 spec does not allow changing to hs400 mode directly
* Need to follow the sequence to change to hs400 mode
* 1. Enable HS200 mode, perform tuning
* 2. Change to high speed mode
* 3. Enable DDR mode
* 4. Enable HS400 mode & execute tuning
*/
DBG("\n Enabling HS400 Mode Start\n");
/* HS400 mode is supported only in DDR 8-bit */
if (width != DATA_BUS_WIDTH_8BIT)
{
dprintf(CRITICAL, "Bus width is not 8-bit, cannot switch to hs400: %u\n", width);
return 1;
}
/* 1.Enable HS200 mode */
mmc_ret = mmc_set_hs200_mode(host, card, width);
if (mmc_ret)
{
dprintf(CRITICAL, "Failure Setting HS200 mode %s\t%d\n",__func__, __LINE__);
return mmc_ret;
}
/* 2. Enable High speed mode */
/* This is needed to set the clock to a low value &
* so that we can switch to hs_timing --> 0x1 */
/* Save the timing value, before changing the clock */
MMC_SAVE_TIMING(host, SDHCI_SDR12_MODE);
sdhci_set_uhs_mode(host, SDHCI_SDR12_MODE);
/* 3. Set HS_TIMING to 0x1 */
mmc_ret = mmc_set_hs_interface(host, card);
if (mmc_ret)
{
dprintf(CRITICAL, "Error adjusting interface speed!:%s\t%d\n", __func__, __LINE__);
return mmc_ret;
}
/*4. Enable DDR mode */
mmc_ret = mmc_set_ddr_mode(host, card);
if (mmc_ret)
{
dprintf(CRITICAL, "Failure setting DDR mode:%s\t%d\n", __func__, __LINE__);
return mmc_ret;
}
/*5. Set hs400 timing */
mmc_ret = mmc_switch_cmd(host, card, MMC_ACCESS_WRITE, MMC_EXT_MMC_HS_TIMING, MMC_HS400_TIMING);
if (mmc_ret)
{
dprintf(CRITICAL, "Switch cmd returned failure %s\t%d\n",__func__, __LINE__);
return mmc_ret;
}
/* 6. Enable SDR104 mode in controller */
/* Save the timing value, before changing the clock */
MMC_SAVE_TIMING(host, MMC_HS400_TIMING);
sdhci_set_uhs_mode(host, SDHCI_SDR104_MODE);
/*
* Enable HS400 mode
*/
sdhci_msm_set_mci_clk(host);
/* 7. Execute Tuning for hs400 mode */
if ((mmc_ret = sdhci_msm_execute_tuning(host, width)))
dprintf(CRITICAL, "Tuning for hs400 failed\n");
DBG("\n Enabling HS400 Mode Done\n");
return mmc_ret;
}
/*
* Function: mmc_host_init
* Arg : mmc device structure
* Return : 0 on success, 1 on Failure
* Flow : Initialize the host contoller
* Set the clock rate to 400 KHZ for init
*/
static uint8_t mmc_host_init(struct mmc_device *dev)
{
uint8_t mmc_ret = 0;
struct sdhci_host *host;
struct mmc_config_data *cfg;
struct sdhci_msm_data *data;
event_t sdhc_event;
host = &dev->host;
cfg = &dev->config;
event_init(&sdhc_event, false, EVENT_FLAG_AUTOUNSIGNAL);
host->base = cfg->sdhc_base;
host->sdhc_event = &sdhc_event;
host->caps.hs400_support = cfg->hs400_support;
data = (struct sdhci_msm_data *) malloc(sizeof(struct sdhci_msm_data));
ASSERT(data);
data->sdhc_event = &sdhc_event;
data->pwrctl_base = cfg->pwrctl_base;
data->pwr_irq = cfg->pwr_irq;
data->slot = cfg->slot;
host->msm_host = data;
/* Initialize any clocks needed for SDC controller */
clock_init_mmc(cfg->slot);
clock_config_mmc(cfg->slot, cfg->max_clk_rate);
/* Configure the CDC clocks needed for emmc storage
* we use slot '1' for emmc
*/
if (cfg->slot == 1)
clock_config_cdc(cfg->slot);
/*
* MSM specific sdhc init
*/
sdhci_msm_init(host, data);
/*
* Initialize the controller, read the host capabilities
* set power on mode
*/
sdhci_init(host);
/* Setup initial freq to 400KHz */
mmc_ret = sdhci_clk_supply(host, SDHCI_CLK_400KHZ);
return mmc_ret;
}
/*
* Function: mmc identify card
* Arg : host & card structure
* Return : 0 on Success, 1 on Failure
* Flow : Performs card identification process:
* 1. Get card's unique identification number (CID)
* 2. Get(for sd)/set (for mmc) relative card address (RCA)
* 3. Select the card to put it in TRAN state
*/
static uint32_t mmc_identify_card(struct sdhci_host *host, struct mmc_card *card)
{
uint32_t mmc_return = 0;
uint32_t raw_csd[4];
/* Ask card to send its unique card identification (CID) number (CMD2) */
mmc_return = mmc_all_send_cid(host, card);
if (mmc_return) {
dprintf(CRITICAL,"Failure getting card's CID number!\n");
return mmc_return;
}
/* Ask card to send a relative card address (RCA) (CMD3) */
mmc_return = mmc_send_relative_address(host, card);
if (mmc_return) {
dprintf(CRITICAL, "Failure getting card's RCA!\n");
return mmc_return;
}
/* Get card's CSD register (CMD9) */
mmc_return = mmc_send_csd(host, card);
if (mmc_return) {
dprintf(CRITICAL,"Failure getting card's CSD information!\n");
return mmc_return;
}
/* Select the card (CMD7) */
mmc_return = mmc_select_card(host, card);
if (mmc_return) {
dprintf(CRITICAL, "Failure selecting the Card with RCA: %x\n",card->rca);
return mmc_return;
}
/* Set the card status as active */
card->status = MMC_STATUS_ACTIVE;
return 0;
}
/*
* Function: mmc_reset_card_and_send_op
* Arg : Host & Card structure
* Return : 0 on Success, 1 on Failure
* Flow : Routine to initialize MMC card. It resets a card to idle state,
* verify operating voltage and set the card in ready state.
*/
static uint32_t mmc_reset_card_and_send_op(struct sdhci_host *host, struct mmc_card *card)
{
uint32_t mmc_return = 0;
/* 1. Card Reset - CMD0 */
mmc_return = mmc_reset_card(host);
if (mmc_return) {
dprintf(CRITICAL, "Failure resetting MMC cards!\n");
return mmc_return;
}
/* 2. Card Initialization process */
/*
* Send CMD1 to identify and reject cards that do not match host's VDD range
* profile. Cards sends its OCR register in response.
*/
mmc_return = mmc_send_op_cond(host, card);
/* OCR is not received, init could not complete */
if (mmc_return) {
dprintf(CRITICAL, "Failure getting OCR response from MMC Card\n");
return mmc_return;
}
return 0;
}
static uint32_t mmc_send_app_cmd(struct sdhci_host *host, struct mmc_card *card)
{
struct mmc_command cmd = {0};
cmd.cmd_index = CMD55_APP_CMD;
cmd.argument = (card->rca << 16);
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
if (sdhci_send_command(host, &cmd))
{
dprintf(CRITICAL, "Failed Sending CMD55\n");
return 1;
}
return 0;
}
uint32_t mmc_sd_card_init(struct sdhci_host *host, struct mmc_card *card)
{
uint8_t i;
uint32_t mmc_ret;
struct mmc_command cmd;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* Use the SD card RCA 0x0 during init */
card->rca = SD_CARD_RCA;
/* Send CMD8 for voltage check*/
for (i = 0 ;i < SD_CMD8_MAX_RETRY; i++)
{
cmd.cmd_index = CMD8_SEND_IF_COND;
cmd.argument = MMC_SD_HC_VOLT_SUPPLIED;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R7;
if (sdhci_send_command(host, &cmd))
{
dprintf(CRITICAL, "The response for CMD8 does not match the supplied value\n");
return 1;
}
else
{
/* If the command response echos the voltage back */
if (cmd.resp[0] == MMC_SD_HC_VOLT_SUPPLIED)
break;
}
/* As per SDCC the spec try for max three times with
* 1 ms delay
*/
mdelay(1);
}
if (i == SD_CMD8_MAX_RETRY && (cmd.resp[0] != MMC_SD_HC_VOLT_SUPPLIED))
{
dprintf(CRITICAL, "Error: CMD8 response timed out\n");
return 1;
}
/* Send ACMD41 for OCR */
for (i = 0; i < SD_ACMD41_MAX_RETRY; i++)
{
/* Send APP_CMD before ACMD41*/
if (mmc_send_app_cmd(host, card))
{
dprintf(CRITICAL, "Failed sending App command\n");
return 1;
}
/* APP_CMD is successful, send ACMD41 now */
cmd.cmd_index = ACMD41_SEND_OP_COND;
cmd.argument = MMC_SD_OCR | MMC_SD_HC_HCS;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R3;
if (sdhci_send_command(host, &cmd))
{
dprintf(CRITICAL, "Failure sending ACMD41\n");
return 1;
}
else
{
if (cmd.resp[0] & MMC_SD_DEV_READY)
{
if (cmd.resp[0] & (1 << 30))
card->type = MMC_CARD_TYPE_SDHC;
else
card->type = MMC_CARD_TYPE_STD_SD;
break;
}
}
/*
* As per SDCC spec try for max 1 second
*/
mdelay(50);
}
if (i == SD_ACMD41_MAX_RETRY && !(cmd.resp[0] & MMC_SD_DEV_READY))
{
dprintf(CRITICAL, "Error: ACMD41 response timed out\n");
return 1;
}
return 0;
}
/*
* Function to read SD card information from SD status
*/
static uint32_t mmc_sd_get_card_ssr(struct sdhci_host *host, struct mmc_card *card)
{
BUF_DMA_ALIGN(raw_sd_status, 64);
struct mmc_command cmd = {0};
uint32_t sd_status[16];
uint32_t *status = sd_status;
uint32_t au_size;
int i;
int j;
if (mmc_send_app_cmd(host, card))
{
dprintf(CRITICAL, "Failed sending App command\n");
return 1;
}
cmd.cmd_index = ACMD13_SEND_SD_STATUS;
cmd.argument = 0x0;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R2;
cmd.trans_mode = SDHCI_MMC_READ;
cmd.data_present = 0x1;
cmd.data.data_ptr = raw_sd_status;
cmd.data.num_blocks = 0x1;
cmd.data.blk_sz = 0x40;
/* send command */
if (sdhci_send_command(host, &cmd))
return 1;
memcpy(sd_status, raw_sd_status, sizeof(sd_status));
for (i = 15, j = 0; i >=0 ; i--, j++)
sd_status[i] = swap_endian32(sd_status[j]);
au_size = UNPACK_BITS(status, MMC_SD_AU_SIZE_BIT, MMC_SD_AU_SIZE_LEN, 32);
/* Card AU size in sectors */
card->ssr.au_size = 1 << (au_size + 4);
card->ssr.num_aus = UNPACK_BITS(status, MMC_SD_ERASE_SIZE_BIT, MMC_SD_ERASE_SIZE_LEN, 32);
return 0;
}
/*
* Function to read the SD CARD configuration register
*/
static uint32_t mmc_sd_get_card_scr(struct sdhci_host *host, struct mmc_card *card)
{
BUF_DMA_ALIGN(scr_resp, 8);
struct mmc_command cmd = {0};
uint32_t raw_scr[2];
/* Now read the SCR register */
/* Send APP_CMD before ACMD51*/
if (mmc_send_app_cmd(host, card))
{
dprintf(CRITICAL, "Failed sending App command\n");
return 1;
}
cmd.cmd_index = ACMD51_READ_CARD_SCR;
cmd.argument = 0x0;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
cmd.trans_mode = SDHCI_MMC_READ;
cmd.data_present = 0x1;
cmd.data.data_ptr = scr_resp;
cmd.data.num_blocks = 0x1;
cmd.data.blk_sz = 0x8;
/* send command */
if (sdhci_send_command(host, &cmd))
return 1;
memcpy(raw_scr, scr_resp, sizeof(raw_scr));
card->raw_scr[0] = swap_endian32(raw_scr[0]);
card->raw_scr[1] = swap_endian32(raw_scr[1]);
/*
* Parse & Populate the SCR data as per sdcc spec
*/
card->scr.bus_widths = (card->raw_scr[0] & SD_SCR_BUS_WIDTH_MASK) >> SD_SCR_BUS_WIDTH;
card->scr.cmd23_support = (card->raw_scr[0] & SD_SCR_CMD23_SUPPORT);
card->scr.sd_spec = (card->raw_scr[0] & SD_SCR_SD_SPEC_MASK) >> SD_SCR_SD_SPEC;
card->scr.sd3_spec = (card->raw_scr[0] & SD_SCR_SD_SPEC3_MASK) >> SD_SCR_SD_SPEC3;
return 0;
}
/*
* Function: mmc_set_sd_bus_width
* Arg : host, device structure & width
* Return : 0 on Success, 1 on Failure
* Flow : Set the bus width for the card
*/
uint32_t mmc_sd_set_bus_width(struct sdhci_host *host, struct mmc_card *card, uint8_t width)
{
struct mmc_command cmd = {0};
/* Send APP_CMD before ACMD6*/
if (mmc_send_app_cmd(host, card))
{
dprintf(CRITICAL, "Failed sending App command\n");
return 1;
}
cmd.cmd_index = ACMD6_SET_BUS_WIDTH;
cmd.argument = (width == DATA_BUS_WIDTH_4BIT) ? (1<<1) : 0;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
/* send command */
if (sdhci_send_command(host, &cmd))
return 1;
return 0;
}
uint32_t mmc_sd_set_hs(struct sdhci_host *host, struct mmc_card *card)
{
struct mmc_command cmd = {0};
BUF_DMA_ALIGN(switch_resp, 64);
cmd.cmd_index = CMD6_SWITCH_FUNC;
cmd.argument = MMC_SD_SWITCH_HS;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
cmd.trans_mode = SDHCI_MMC_READ;
cmd.data_present = 0x1;
cmd.data.data_ptr = switch_resp;
cmd.data.num_blocks = 0x1;
cmd.data.blk_sz = 0x40;
/* send command */
if (sdhci_send_command(host, &cmd))
return 1;
/* Set the SDR25 mode in controller*/
sdhci_set_uhs_mode(host, SDHCI_SDR25_MODE);
return 0;
}
/*
* Function: mmc_init_card
* Arg : mmc device structure
* Return : 0 on Success, 1 on Failure
* Flow : Performs initialization and identification of eMMC cards connected
* to the host.
*/
static uint32_t mmc_card_init(struct mmc_device *dev)
{
uint32_t mmc_return = 0;
uint32_t status;
uint8_t bus_width = 0;
struct sdhci_host *host;
struct mmc_card *card;
struct mmc_config_data *cfg;
host = &dev->host;
card = &dev->card;
cfg = &dev->config;
/* Initialize MMC card structure */
card->status = MMC_STATUS_INACTIVE;
/* TODO: Get the OCR params from target */
card->ocr = MMC_OCR_27_36 | MMC_OCR_SEC_MODE;
/* Initialize the internal MMC */
mmc_return = mmc_reset_card_and_send_op(host, card);
if (mmc_return)
{
dprintf(CRITICAL, "MMC card failed to respond, try for SD card\n");
/* Reset the card & get the OCR */
mmc_return = mmc_sd_card_init(host, card);
if (mmc_return)
{
dprintf(CRITICAL, "Failed to initialize SD card\n");
return mmc_return;
}
}
/* Identify (CMD2, CMD3 & CMD9) and select the card (CMD7) */
mmc_return = mmc_identify_card(host, card);
if (mmc_return)
return mmc_return;
/* set interface speed */
if (MMC_CARD_SD(card))
{
mmc_return = mmc_sd_set_hs(host, card);
if (mmc_return)
{
dprintf(CRITICAL, "Failed to set HS for SD card\n");
return mmc_return;
}
}
else
{
mmc_return = mmc_set_hs_interface(host, card);
if (mmc_return) {
dprintf(CRITICAL, "Error adjusting interface speed!\n");
return mmc_return;
}
}
/* Now get the extended CSD for the card */
if (MMC_CARD_MMC(card))
{
/* For MMC cards, also get the extended csd */
mmc_return = mmc_get_ext_csd(host, card);
if (mmc_return) {
dprintf(CRITICAL, "Failure getting card's ExtCSD information!\n");
return mmc_return;
}
}
else
{
/*Read SCR for sd card */
if (mmc_sd_get_card_scr(host, card))
{
dprintf(CRITICAL, "Failure getting card's SCR register\n");
return 1;
}
/* Read SSR for the SD card */
if (mmc_sd_get_card_ssr(host, card))
{
dprintf(CRITICAL, "Failed to get SSR from the card\n");
return 1;
}
}
/* Decode and save the CSD register */
mmc_return = mmc_decode_and_save_csd(card);
if (mmc_return) {
dprintf(CRITICAL, "Failure decoding card's CSD information!\n");
return mmc_return;
}
if (MMC_CARD_MMC(card))
{
/* Set the bus width based on host, target capbilities */
if (cfg->bus_width == DATA_BUS_WIDTH_8BIT && host->caps.bus_width_8bit)
bus_width = DATA_BUS_WIDTH_8BIT;
/*
* Host contoller by default supports 4 bit & 1 bit mode.
* No need to check for host support here
*/
else if (cfg->bus_width == DATA_BUS_WIDTH_4BIT)
bus_width = DATA_BUS_WIDTH_4BIT;
else
bus_width = DATA_BUS_WIDTH_1BIT;
/* Set 4/8 bit SDR bus width in controller */
mmc_return = sdhci_set_bus_width(host, bus_width);
if (mmc_return) {
dprintf(CRITICAL, "Failed to set bus width for host controller\n");
return 1;
}
/* Enable high speed mode in the follwing order:
* 1. HS400 mode if supported by host & card
* 1. HS200 mode if supported by host & card
* 2. DDR mode host, if supported by host & card
* 3. Use normal speed mode with supported bus width
*/
if (host->caps.hs400_support && mmc_card_supports_hs400_mode(card))
{
mmc_return = mmc_set_hs400_mode(host, card, bus_width);
if (mmc_return)
{
dprintf(CRITICAL, "Failure to set HS400 mode for Card(RCA:%x)\n",
card->rca);
return mmc_return;
}
}
else if (host->caps.sdr104_support && mmc_card_supports_hs200_mode(card))
{
mmc_return = mmc_set_hs200_mode(host, card, bus_width);
if (mmc_return) {
dprintf(CRITICAL, "Failure to set HS200 mode for Card(RCA:%x)\n",
card->rca);
return mmc_return;
}
} else if (host->caps.ddr_support && mmc_card_supports_ddr_mode(card)) {
mmc_return = mmc_set_ddr_mode(host, card);
if (mmc_return) {
dprintf(CRITICAL, "Failure to set DDR mode for Card(RCA:%x)\n",
card->rca);
return mmc_return;
}
} else {
/* Set 4/8 bit bus width for the card */
mmc_return = mmc_set_bus_width(host, card, bus_width);
if (mmc_return) {
dprintf(CRITICAL, "Failure to set wide bus for Card(RCA:%x)\n",
card->rca);
return mmc_return;
}
}
}
else
{
/* Check the supported bus width for the card from SCR register */
if (card->scr.bus_widths & SD_SCR_WIDTH_4BIT)
bus_width = DATA_BUS_WIDTH_4BIT;
else
bus_width = DATA_BUS_WIDTH_1BIT;
mmc_return = mmc_sd_set_bus_width(host, card, bus_width);
if (mmc_return)
{
dprintf(CRITICAL, "Failed to set bus width for the card\n");
return mmc_return;
}
/* Set bit SDR bus width in controller */
mmc_return = sdhci_set_bus_width(host, bus_width);
if (mmc_return)
{
dprintf(CRITICAL, "Failed to set bus width for host controller\n");
return mmc_return;
}
}
/* Verify TRAN state after changing speed and bus width */
mmc_return = mmc_get_card_status(host, card, &status);
if (mmc_return)
return mmc_return;
if (MMC_CARD_STATUS(status) != MMC_TRAN_STATE)
mmc_return = 1;
card->block_size = MMC_BLK_SZ;
return mmc_return;
}
/*
* Function: mmc display csd
* Arg : None
* Return : None
* Flow : Displays the csd information
*/
static void mmc_display_csd(struct mmc_card *card)
{
dprintf(SPEW, "erase_grpsize: %d\n", card->csd.erase_grp_size);
dprintf(SPEW, "erase_grpmult: %d\n", card->csd.erase_grp_mult);
dprintf(SPEW, "wp_grpsize: %d\n", card->csd.wp_grp_size);
dprintf(SPEW, "wp_grpen: %d\n", card->csd.wp_grp_enable);
dprintf(SPEW, "perm_wp: %d\n", card->csd.perm_wp);
dprintf(SPEW, "temp_wp: %d\n", card->csd.temp_wp);
}
/*
* Function: mmc_init
* Arg : MMC configuration data
* Return : Pointer to mmc device
* Flow : Entry point to MMC boot process
* Initialize the sd host controller
* Initialize the mmc card
* Set the clock & high speed mode
*/
struct mmc_device *mmc_init(struct mmc_config_data *data)
{
uint8_t mmc_ret = 0;
struct mmc_device *dev;
dev = (struct mmc_device *) malloc (sizeof(struct mmc_device));
if (!dev) {
dprintf(CRITICAL, "Error allocating mmc device\n");
return NULL;
}
ASSERT(data);
memcpy((void*)&dev->config, (void*)data, sizeof(struct mmc_config_data));
memset((struct mmc_card *)&dev->card, 0, sizeof(struct mmc_card));
/* Initialize the host & clock */
dprintf(SPEW, " Initializing MMC host data structure and clock!\n");
mmc_ret = mmc_host_init(dev);
if (mmc_ret) {
dprintf(CRITICAL, "Error Initializing MMC host : %u\n", mmc_ret);
return NULL;
}
/* Initialize and identify cards connected to host */
mmc_ret = mmc_card_init(dev);
if (mmc_ret) {
dprintf(CRITICAL, "Failed detecting MMC/SDC @ slot%d\n",
dev->config.slot);
return NULL;
}
dprintf(INFO, "Done initialization of the card\n");
mmc_display_csd(&dev->card);
return dev;
}
/*
* Function: mmc sdhci read
* Arg : mmc device structure, block address, number of blocks & destination
* Return : 0 on Success, non zero on success
* Flow : Fill in the command structure & send the command
*/
uint32_t mmc_sdhci_read(struct mmc_device *dev, void *dest,
uint64_t blk_addr, uint32_t num_blocks)
{
uint32_t mmc_ret = 0;
struct mmc_command cmd;
struct mmc_card *card = &dev->card;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD17/18 Format:
* [31:0] Data Address
*/
if (num_blocks == 1)
cmd.cmd_index = CMD17_READ_SINGLE_BLOCK;
else
cmd.cmd_index = CMD18_READ_MULTIPLE_BLOCK;
/*
* Standard emmc cards use byte mode addressing
* convert the block address to byte address before
* sending the command
*/
if (card->type == MMC_TYPE_STD_MMC)
cmd.argument = blk_addr * card->block_size;
else
cmd.argument = blk_addr;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
cmd.trans_mode = SDHCI_MMC_READ;
cmd.data_present = 0x1;
/* Use CMD23 If card supports CMD23:
* For SD card use the value read from SCR register
* For emmc by default use CMD23.
* Also as per SDCC spec always use CMD23 to stop
* multiblock read/write if UHS (Ultra High Speed) is
* enabled
*/
if (MMC_CARD_SD(card))
cmd.cmd23_support = dev->card.scr.cmd23_support;
else
cmd.cmd23_support = 0x1;
cmd.data.data_ptr = dest;
cmd.data.num_blocks = num_blocks;
/* send command */
mmc_ret = sdhci_send_command(&dev->host, &cmd);
if (mmc_ret) {
return mmc_ret;
}
/* Response contains 32 bit Card status. Here we'll check
BLOCK_LEN_ERROR and ADDRESS_ERROR */
if (cmd.resp[0] & MMC_R1_BLOCK_LEN_ERR) {
dprintf(CRITICAL, "The transferred bytes does not match the block length\n");
return 1;
}
/* Misaligned address not matching block length */
if (cmd.resp[0] & MMC_R1_ADDR_ERR) {
dprintf(CRITICAL, "The misaligned address did not match the block length used\n");
return 1;
}
if (MMC_CARD_STATUS(cmd.resp[0]) != MMC_TRAN_STATE) {
dprintf(CRITICAL, "MMC read failed, card is not in TRAN state\n");
return 1;
}
return mmc_ret;
}
/*
* Function: mmc sdhci write
* Arg : mmc device structure, block address, number of blocks & source
* Return : 0 on Success, non zero on success
* Flow : Fill in the command structure & send the command
*/
uint32_t mmc_sdhci_write(struct mmc_device *dev, void *src,
uint64_t blk_addr, uint32_t num_blocks)
{
uint32_t mmc_ret = 0;
struct mmc_command cmd;
struct mmc_card *card = &dev->card;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* CMD24/25 Format:
* [31:0] Data Address
*/
if (num_blocks == 1)
cmd.cmd_index = CMD24_WRITE_SINGLE_BLOCK;
else
cmd.cmd_index = CMD25_WRITE_MULTIPLE_BLOCK;
/*
* Standard emmc cards use byte mode addressing
* convert the block address to byte address before
* sending the command
*/
if (card->type == MMC_TYPE_STD_MMC)
cmd.argument = blk_addr * card->block_size;
else
cmd.argument = blk_addr;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
cmd.trans_mode = SDHCI_MMC_WRITE;
/* Use CMD23 If card supports CMD23:
* For SD card use the value read from SCR register
* For emmc by default use CMD23.
* Also as per SDCC spec always use CMD23 to stop
* multiblock read/write if UHS (Ultra High Speed) is
* enabled
*/
if (MMC_CARD_SD(card))
cmd.cmd23_support = dev->card.scr.cmd23_support;
else
cmd.cmd23_support = 0x1;
cmd.data_present = 0x1;
cmd.data.data_ptr = src;
cmd.data.num_blocks = num_blocks;
/* send command */
mmc_ret = sdhci_send_command(&dev->host, &cmd);
if (mmc_ret)
return mmc_ret;
/* Response contains 32 bit Card status. Here we'll check
BLOCK_LEN_ERROR and ADDRESS_ERROR */
if (cmd.resp[0] & MMC_R1_BLOCK_LEN_ERR) {
dprintf(CRITICAL, "The transferred bytes does not match the block length\n");
return 1;
}
/* Misaligned address not matching block length */
if (cmd.resp[0] & MMC_R1_ADDR_ERR) {
dprintf(CRITICAL, "The misaligned address did not match the block length used\n");
return 1;
}
if (MMC_CARD_STATUS(cmd.resp[0]) != MMC_TRAN_STATE) {
dprintf(CRITICAL, "MMC read failed, card is not in TRAN state\n");
return 1;
}
return mmc_ret;
}
/*
* Send the erase group start address using CMD35
*/
static uint32_t mmc_send_erase_grp_start(struct mmc_device *dev, uint32_t erase_start)
{
struct mmc_command cmd;
struct mmc_card *card = &dev->card;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
if (MMC_CARD_MMC(card))
cmd.cmd_index = CMD35_ERASE_GROUP_START;
else
cmd.cmd_index = CMD32_ERASE_WR_BLK_START;
/*
* Standard emmc cards use byte mode addressing
* convert the block address to byte address before
* sending the command
*/
if (card->type == MMC_TYPE_STD_MMC)
cmd.argument = erase_start * card->block_size;
else
cmd.argument = erase_start;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
/* send command */
if (sdhci_send_command(&dev->host, &cmd))
return 1;
/*
* CMD35 on failure returns address out of range error
*/
if (MMC_ADDR_OUT_OF_RANGE(cmd.resp[0]))
{
dprintf(CRITICAL, "Address for CMD35 is out of range\n");
return 1;
}
return 0;
}
/*
* Send the erase group end address using CMD36
*/
static uint32_t mmc_send_erase_grp_end(struct mmc_device *dev, uint32_t erase_end)
{
struct mmc_command cmd;
struct mmc_card *card = &dev->card;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
if (MMC_CARD_MMC(card))
cmd.cmd_index = CMD36_ERASE_GROUP_END;
else
cmd.cmd_index = CMD33_ERASE_WR_BLK_END;
/*
* Standard emmc cards use byte mode addressing
* convert the block address to byte address before
* sending the command
*/
if (card->type == MMC_TYPE_STD_MMC)
cmd.argument = erase_end * card->block_size;
else
cmd.argument = erase_end;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
/* send command */
if (sdhci_send_command(&dev->host, &cmd))
return 1;
/*
* CMD3 on failure returns address out of range error
*/
if (MMC_ADDR_OUT_OF_RANGE(cmd.resp[0]))
{
dprintf(CRITICAL, "Address for CMD36 is out of range\n");
return 1;
}
return 0;
}
/*
* Send the erase CMD38, to erase the selected erase groups
*/
static uint32_t mmc_send_erase(struct mmc_device *dev)
{
struct mmc_command cmd;
uint32_t status;
uint32_t retry = 0;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
cmd.cmd_index = CMD38_ERASE;
cmd.argument = 0x00000000;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1B;
/* send command */
if (sdhci_send_command(&dev->host, &cmd))
return 1;
do
{
if (mmc_get_card_status(&dev->host, &dev->card, &status))
{
dprintf(CRITICAL, "Failed to get card status after erase\n");
return 1;
}
/* Check if the response of erase command has eras skip status set */
if (status & MMC_R1_WP_ERASE_SKIP)
dprintf(CRITICAL, "Write Protect set for the region, only partial space was erased\n");
retry++;
udelay(1000);
if (retry == MMC_MAX_CARD_STAT_RETRY)
{
dprintf(CRITICAL, "Card status check timed out after sending erase command\n");
return 1;
}
} while(!(status & MMC_READY_FOR_DATA) || (MMC_CARD_STATUS(status) == MMC_PROG_STATE));
return 0;
}
/*
* Function: mmc sdhci erase
* Arg : mmc device structure, block address and length
* Return : 0 on Success, non zero on failure
* Flow : Fill in the command structure & send the command
*/
uint32_t mmc_sdhci_erase(struct mmc_device *dev, uint32_t blk_addr, uint64_t len)
{
uint32_t erase_unit_sz = 0;
uint32_t erase_start;
uint32_t erase_end;
uint32_t blk_end;
uint32_t num_erase_grps;
uint32_t *out;
struct mmc_card *card;
card = &dev->card;
/*
* Calculate the erase unit size,
* 1. Based on emmc 4.5 spec for emmc card
* 2. Use SD Card Status info for SD cards
*/
if (MMC_CARD_MMC(card))
{
/*
* Calculate the erase unit size as per the emmc specification v4.5
*/
if (dev->card.ext_csd[MMC_ERASE_GRP_DEF])
erase_unit_sz = (MMC_HC_ERASE_MULT * dev->card.ext_csd[MMC_HC_ERASE_GRP_SIZE]) / MMC_BLK_SZ;
else
erase_unit_sz = (dev->card.csd.erase_grp_size + 1) * (dev->card.csd.erase_grp_mult + 1);
}
else
erase_unit_sz = dev->card.ssr.au_size * dev->card.ssr.num_aus;
/* Convert length in blocks */
len = len / MMC_BLK_SZ;
if (len < erase_unit_sz)
{
dprintf(CRITICAL, "Requested length is less than min erase group size\n");
return 1;
}
/* Calculate erase groups based on the length in blocks */
num_erase_grps = len / erase_unit_sz;
/* Start address of the erase range */
erase_start = blk_addr;
/* Last address of the erase range */
erase_end = blk_addr + ((num_erase_grps - 1) * erase_unit_sz);
/* Boundary check for overlap */
blk_end = blk_addr + len;
if (erase_end > blk_end)
{
dprintf(CRITICAL, "The erase group overlaps the max requested for erase\n");
erase_end -= erase_unit_sz;
}
/* Send CMD35 for erase group start */
if (mmc_send_erase_grp_start(dev, erase_start))
{
dprintf(CRITICAL, "Failed to send erase grp start address\n");
return 1;
}
/* Send CMD36 for erase group end */
if (mmc_send_erase_grp_end(dev, erase_end))
{
dprintf(CRITICAL, "Failed to send erase grp end address\n");
return 1;
}
/* Send CMD38 to perform erase */
if (mmc_send_erase(dev))
{
dprintf(CRITICAL, "Failed to erase the specified partition\n");
return 1;
}
return 0;
}
/*
* Function: mmc get wp status
* Arg : mmc device structure, block address and buffer for getting wp status
* Return : 0 on Success, 1 on Failure
* Flow : Get the WP group status by sending CMD31
*/
uint32_t mmc_get_wp_status(struct mmc_device *dev, uint32_t addr, uint8_t *wp_status)
{
struct mmc_command cmd;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
cmd.cmd_index = CMD31_SEND_WRITE_PROT_TYPE;
cmd.argument = addr;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1;
cmd.trans_mode = SDHCI_MMC_READ;
cmd.data_present = 0x1;
cmd.data.data_ptr = wp_status;
cmd.data.num_blocks = 0x1;
cmd.data.blk_sz = 0x8;
if (sdhci_send_command(&dev->host, &cmd))
{
dprintf(CRITICAL, "Failed to get status of write protect bits\n");
return 1;
}
return 0;
}
/*
* Function: mmc set/clear WP on user area
* Arg : mmc device structure, block address,len, & flag to set or clear
* Return : 0 on success, 1 on failure
* Flow : Function to set/clear power on write protect on user area
*/
uint32_t mmc_set_clr_power_on_wp_user(struct mmc_device *dev, uint32_t addr, uint64_t len, uint8_t set_clr)
{
struct mmc_command cmd;
uint32_t wp_grp_size;
uint32_t status;
uint32_t num_wp_grps;
uint32_t ret;
uint32_t retry = 0;
uint32_t i;
memset((struct mmc_command *)&cmd, 0, sizeof(struct mmc_command));
/* Convert len into blocks */
len = len / MMC_BLK_SZ;
/* Disable PERM WP */
ret = mmc_switch_cmd(&dev->host, &dev->card, MMC_SET_BIT, MMC_USR_WP, MMC_US_PERM_WP_DIS);
if (ret)
{
dprintf(CRITICAL, "Failed to Disable PERM WP\n");
return ret;
}
/* Read the default values for user WP */
ret = mmc_get_ext_csd(&dev->host, &dev->card);
if (ret)
{
dprintf(CRITICAL, "Failed to read ext csd for the card\n");
return ret;
}
/* Check if user power on WP is disabled or perm WP is enabled */
if ((dev->card.ext_csd[MMC_USR_WP] & MMC_US_PWR_WP_DIS)
|| (dev->card.ext_csd[MMC_USR_WP] & MMC_US_PERM_WP_EN))
{
dprintf(CRITICAL, "Power on protection is disabled, cannot be set\n");
return 1;
}
/* Calculate the wp grp size */
if (dev->card.ext_csd[MMC_ERASE_GRP_DEF])
wp_grp_size = MMC_HC_ERASE_MULT * dev->card.ext_csd[MMC_HC_ERASE_GRP_SIZE] / MMC_BLK_SZ;
else
wp_grp_size = (dev->card.csd.wp_grp_size + 1) * (dev->card.csd.erase_grp_size + 1) \
* (dev->card.csd.erase_grp_mult + 1);
if (len < wp_grp_size)
{
dprintf(CRITICAL, "Length is less than min WP size, WP was not set\n");
return 1;
}
/* Set power on USER WP */
ret = mmc_switch_cmd(&dev->host, &dev->card, MMC_SET_BIT, MMC_USR_WP, MMC_US_PWR_WP_EN);
if (ret)
{
dprintf(CRITICAL, "Failed to set power on WP for user\n");
return ret;
}
num_wp_grps = ROUNDUP(len, wp_grp_size) / wp_grp_size;
if (set_clr)
cmd.cmd_index = CMD28_SET_WRITE_PROTECT;
else
cmd.cmd_index = CMD29_CLEAR_WRITE_PROTECT;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1B;
for(i = 0; i < num_wp_grps; i++)
{
cmd.argument = addr + (i * wp_grp_size);
if (sdhci_send_command(&dev->host, &cmd))
return 1;
/* CMD28/CMD29 On failure returns address out of range error */
if (MMC_ADDR_OUT_OF_RANGE(cmd.resp[0]))
{
dprintf(CRITICAL, "Address for CMD28/29 is out of range\n");
return 1;
}
/* Check the card status */
do
{
if (mmc_get_card_status(&dev->host, &dev->card, &status))
{
dprintf(CRITICAL, "Failed to get card status afterapplying write protect\n");
return 1;
}
/* Time out for WP command */
retry++;
udelay(1000);
if (retry == MMC_MAX_CARD_STAT_RETRY)
{
dprintf(CRITICAL, "Card status timed out after sending write protect command\n");
return 1;
}
} while (!(status & MMC_READY_FOR_DATA) || (MMC_CARD_STATUS(status) == MMC_PROG_STATE));
}
return 0;
}
/* Function to put the mmc card to sleep */
void mmc_put_card_to_sleep(struct mmc_device *dev)
{
struct mmc_command cmd = {0};
struct mmc_card *card = &dev->card;
cmd.cmd_index = CMD7_SELECT_DESELECT_CARD;
cmd.argument = 0x00000000;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_NONE;
/* send command */
if(sdhci_send_command(&dev->host, &cmd))
{
dprintf(CRITICAL, "card deselect error: %s\n", __func__);
return;
}
cmd.cmd_index = CMD5_SLEEP_AWAKE;
cmd.argument = (card->rca << MMC_CARD_RCA_BIT) | MMC_CARD_SLEEP;
cmd.cmd_type = SDHCI_CMD_TYPE_NORMAL;
cmd.resp_type = SDHCI_CMD_RESP_R1B;
/* send command */
if(sdhci_send_command(&dev->host, &cmd))
dprintf(CRITICAL, "card sleep error: %s\n", __func__);
}